Add PX4IOAR PX4FLOW example startup script

1 files changed, 94 insertions, 0 deletions

diff --git a/ROMFS/px4fmu_common/init.d/rc.PX4IOAR_PX4FLOW_example b/ROMFS/px4fmu_common/init.d/rc.PX4IOAR_PX4FLOW_example
new file mode 100644
index 000000000..e7173f6e6
--- /dev/null
+++ b/ROMFS/px4fmu_common/init.d/rc.PX4IOAR_PX4FLOW_example
@@ -0,0 +1,94 @@
+#!nsh
+#
+# Flight startup script for PX4FMU on PX4IOAR carrier board.
+#
+
+# Disable the USB interface
+set USB no
+
+# Disable autostarting other apps
+set MODE ardrone
+ 
+echo "[init] doing PX4IOAR startup..."
+ 
+#
+# Start the ORB
+#
+uorb start
+ 
+#
+# Load microSD params
+#
+echo "[init] loading microSD params"
+param select /fs/microsd/params
+if [ -f /fs/microsd/params ]
+then
+	param load /fs/microsd/params
+fi
+
+#
+# Force some key parameters to sane values
+# MAV_TYPE     1 = fixed wing, 2 = quadrotor, 13 = hexarotor
+#              see https://pixhawk.ethz.ch/mavlink/
+#
+param set MAV_TYPE 2
+
+#
+# Configure PX4FMU for operation with PX4IOAR
+#
+fmu mode_gpio_serial
+ 
+#
+# Start the sensors.
+#
+sh /etc/init.d/rc.sensors
+
+#
+# Start MAVLink and MAVLink Onboard (Flow Sensor)
+#
+mavlink start -d /dev/ttyS0 -b 57600
+mavlink_onboard start -d /dev/ttyS3 -b 115200
+usleep 5000
+
+#
+# Start the commander.
+#
+commander start
+
+#
+# Start the attitude estimator
+#
+attitude_estimator_ekf start
+
+#
+# Start the position estimator
+#
+flow_position_estimator start
+
+#
+# Fire up the multi rotor attitude controller
+#
+multirotor_att_control start
+
+#
+# Fire up the flow position controller
+#
+flow_position_control start
+
+#
+# Fire up the flow speed controller
+#
+flow_speed_control start
+
+#
+# Fire up the AR.Drone interface.
+#
+ardrone_interface start -d /dev/ttyS1
+ 
+#
+# startup is done; we don't want the shell because we
+# use the same UART for telemetry
+#
+echo "[init] startup done"
+
+exit