diff options
author | Lorenz Meier <lm@inf.ethz.ch> | 2014-07-01 09:28:49 +0200 |
---|---|---|
committer | Lorenz Meier <lm@inf.ethz.ch> | 2014-07-01 09:28:49 +0200 |
commit | 4f7e66bba246e4972ccfab188ee3a7d4e4af3c86 (patch) | |
tree | ff0b4f429fdfb957a225539053ed7249bee5798d /ROMFS | |
parent | 183a0cdb22fd824d87912ea3d2c2470f0d28ed39 (diff) | |
parent | 8408993a676acd0149e880ffeded74ce9c67b9c5 (diff) | |
download | px4-firmware-4f7e66bba246e4972ccfab188ee3a7d4e4af3c86.tar.gz px4-firmware-4f7e66bba246e4972ccfab188ee3a7d4e4af3c86.tar.bz2 px4-firmware-4f7e66bba246e4972ccfab188ee3a7d4e4af3c86.zip |
Merged master in yaw_acceptance_fix
Diffstat (limited to 'ROMFS')
21 files changed, 375 insertions, 130 deletions
diff --git a/ROMFS/px4fmu_common/init.d/10016_3dr_iris b/ROMFS/px4fmu_common/init.d/10016_3dr_iris index 26bea688a..084dff140 100644 --- a/ROMFS/px4fmu_common/init.d/10016_3dr_iris +++ b/ROMFS/px4fmu_common/init.d/10016_3dr_iris @@ -18,9 +18,9 @@ then param set MC_PITCHRATE_P 0.13 param set MC_PITCHRATE_I 0.0 param set MC_PITCHRATE_D 0.004 - param set MC_YAW_P 0.5 - param set MC_YAWRATE_P 0.2 - param set MC_YAWRATE_I 0.1 + param set MC_YAW_P 2.5 + param set MC_YAWRATE_P 0.25 + param set MC_YAWRATE_I 0.25 param set MC_YAWRATE_D 0.0 param set BAT_V_SCALING 0.00989 diff --git a/ROMFS/px4fmu_common/init.d/10017_steadidrone_qu4d b/ROMFS/px4fmu_common/init.d/10017_steadidrone_qu4d new file mode 100644 index 000000000..6179855f6 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/10017_steadidrone_qu4d @@ -0,0 +1,35 @@ +#!nsh +# +# Steadidrone QU4D +# +# Thomas Gubler <thomasgubler@gmail.com> +# Lorenz Meier <lm@inf.ethz.ch> +# + +sh /etc/init.d/rc.mc_defaults + +if [ $DO_AUTOCONFIG == yes ] +then + # TODO tune roll/pitch separately + param set MC_ROLL_P 7.0 + param set MC_ROLLRATE_P 0.13 + param set MC_ROLLRATE_I 0.0 + param set MC_ROLLRATE_D 0.004 + param set MC_PITCH_P 7.0 + param set MC_PITCHRATE_P 0.13 + param set MC_PITCHRATE_I 0.0 + param set MC_PITCHRATE_D 0.004 + param set MC_YAW_P 0.5 + param set MC_YAWRATE_P 0.2 + param set MC_YAWRATE_I 0.0 + param set MC_YAWRATE_D 0.0 + + param set BAT_N_CELLS 4 +fi + +set MIXER FMU_quad_w + +set PWM_MIN 1210 +set PWM_MAX 2100 + +set PWM_OUTPUTS 1234 diff --git a/ROMFS/px4fmu_common/init.d/11001_hexa_cox b/ROMFS/px4fmu_common/init.d/11001_hexa_cox index 38e65435b..daa04a4de 100644 --- a/ROMFS/px4fmu_common/init.d/11001_hexa_cox +++ b/ROMFS/px4fmu_common/init.d/11001_hexa_cox @@ -1,7 +1,5 @@ #!nsh # -# UNTESTED UNTESTED! -# # Generic 10" Hexa coaxial geometry # # Lorenz Meier <lm@inf.ethz.ch> @@ -9,7 +7,7 @@ sh /etc/init.d/rc.mc_defaults -set MIXER hexa_cox +set MIXER FMU_hexa_cox # We only can run one channel group with one rate, so set all 8 channels set PWM_OUTPUTS 12345678 diff --git a/ROMFS/px4fmu_common/init.d/12001_octo_cox b/ROMFS/px4fmu_common/init.d/12001_octo_cox index 99f902a6d..8703f5f2f 100644 --- a/ROMFS/px4fmu_common/init.d/12001_octo_cox +++ b/ROMFS/px4fmu_common/init.d/12001_octo_cox @@ -7,6 +7,6 @@ sh /etc/init.d/rc.mc_defaults -set MIXER octo_cox +set MIXER FMU_octo_cox set PWM_OUTPUTS 12345678 diff --git a/ROMFS/px4fmu_common/init.d/2100_mpx_easystar b/ROMFS/px4fmu_common/init.d/2100_mpx_easystar index 465a22c53..3ab2ac3d1 100644 --- a/ROMFS/px4fmu_common/init.d/2100_mpx_easystar +++ b/ROMFS/px4fmu_common/init.d/2100_mpx_easystar @@ -5,4 +5,4 @@ sh /etc/init.d/rc.fw_defaults -set MIXER FMU_RET +set MIXER easystar diff --git a/ROMFS/px4fmu_common/init.d/3031_phantom b/ROMFS/px4fmu_common/init.d/3031_phantom index 6cbd23643..d05c3174f 100644 --- a/ROMFS/px4fmu_common/init.d/3031_phantom +++ b/ROMFS/px4fmu_common/init.d/3031_phantom @@ -10,8 +10,8 @@ sh /etc/init.d/rc.fw_defaults if [ $DO_AUTOCONFIG == yes ] then param set FW_AIRSPD_MIN 13 - param set FW_AIRSPD_TRIM 18 - param set FW_AIRSPD_MAX 40 + param set FW_AIRSPD_TRIM 15 + param set FW_AIRSPD_MAX 25 param set FW_ATT_TC 0.3 param set FW_L1_DAMPING 0.75 param set FW_L1_PERIOD 15 @@ -23,12 +23,12 @@ then param set FW_P_LIM_MIN -50 param set FW_P_RMAX_NEG 0 param set FW_P_RMAX_POS 0 - param set FW_P_ROLLFF 0 + param set FW_P_ROLLFF 1 param set FW_RR_FF 0.5 param set FW_RR_I 0.02 param set FW_RR_IMAX 0.2 param set FW_RR_P 0.08 - param set FW_R_LIM 70 + param set FW_R_LIM 50 param set FW_R_RMAX 0 param set FW_T_HRATE_P 0.01 param set FW_T_RLL2THR 15 @@ -37,3 +37,7 @@ then fi set MIXER FMU_Q + +# Provide ESC a constant 1000 us pulse +set PWM_OUTPUTS 4 +set PWM_DISARMED 1000 diff --git a/ROMFS/px4fmu_common/init.d/3032_skywalker_x5 b/ROMFS/px4fmu_common/init.d/3032_skywalker_x5 index bf5a87068..465166f25 100644 --- a/ROMFS/px4fmu_common/init.d/3032_skywalker_x5 +++ b/ROMFS/px4fmu_common/init.d/3032_skywalker_x5 @@ -23,7 +23,7 @@ then param set FW_P_LIM_MIN -45 param set FW_P_RMAX_NEG 0 param set FW_P_RMAX_POS 0 - param set FW_P_ROLLFF 0 + param set FW_P_ROLLFF 1 param set FW_RR_FF 0.3 param set FW_RR_I 0 param set FW_RR_IMAX 0.2 diff --git a/ROMFS/px4fmu_common/init.d/4008_ardrone b/ROMFS/px4fmu_common/init.d/4008_ardrone index 0c3cd09dd..e6007db0e 100644 --- a/ROMFS/px4fmu_common/init.d/4008_ardrone +++ b/ROMFS/px4fmu_common/init.d/4008_ardrone @@ -14,19 +14,20 @@ sh /etc/init.d/rc.mc_defaults if [ $DO_AUTOCONFIG == yes ] then # Set all params here, then disable autoconfig - param set MC_ROLL_P 5.0 - param set MC_ROLLRATE_P 0.13 - param set MC_ROLLRATE_I 0.0 - param set MC_ROLLRATE_D 0.0 - param set MC_PITCH_P 5.0 - param set MC_PITCHRATE_P 0.13 - param set MC_PITCHRATE_I 0.0 - param set MC_PITCHRATE_D 0.0 - param set MC_YAW_P 1.0 - param set MC_YAWRATE_P 0.15 - param set MC_YAWRATE_I 0.05 + param set MC_ROLL_P 6.0 + param set MC_ROLLRATE_P 0.14 + param set MC_ROLLRATE_I 0.1 + param set MC_ROLLRATE_D 0.002 + param set MC_PITCH_P 6.0 + param set MC_PITCHRATE_P 0.14 + param set MC_PITCHRATE_I 0.1 + param set MC_PITCHRATE_D 0.002 + param set MC_YAW_P 2.0 + param set MC_YAWRATE_P 0.2 + param set MC_YAWRATE_I 0.2 param set MC_YAWRATE_D 0.0 - param set MC_YAW_FF 0.15 + param set MC_YAW_FF 0.8 + param set BAT_V_SCALING 0.00838095238 fi diff --git a/ROMFS/px4fmu_common/init.d/rc.autostart b/ROMFS/px4fmu_common/init.d/rc.autostart index 5ec735d39..b365bd642 100644 --- a/ROMFS/px4fmu_common/init.d/rc.autostart +++ b/ROMFS/px4fmu_common/init.d/rc.autostart @@ -195,6 +195,11 @@ then sh /etc/init.d/10016_3dr_iris fi +if param compare SYS_AUTOSTART 10017 +then + sh /etc/init.d/10017_steadidrone_qu4d +fi + # # Hexa Coaxial # diff --git a/ROMFS/px4fmu_common/init.d/rc.fw_apps b/ROMFS/px4fmu_common/init.d/rc.fw_apps index 429abc5ec..9aca3fc5f 100644 --- a/ROMFS/px4fmu_common/init.d/rc.fw_apps +++ b/ROMFS/px4fmu_common/init.d/rc.fw_apps @@ -6,7 +6,7 @@ # # Start the attitude and position estimator # -fw_att_pos_estimator start +ekf_att_pos_estimator start # # Start attitude controller diff --git a/ROMFS/px4fmu_common/init.d/rc.fw_defaults b/ROMFS/px4fmu_common/init.d/rc.fw_defaults index 4cd73e23f..3a50fcf56 100644 --- a/ROMFS/px4fmu_common/init.d/rc.fw_defaults +++ b/ROMFS/px4fmu_common/init.d/rc.fw_defaults @@ -11,6 +11,4 @@ then param set NAV_RTL_ALT 100 param set NAV_RTL_LAND_T -1 param set NAV_ACCEPT_RAD 50 - param set RC_SCALE_ROLL 1 - param set RC_SCALE_PITCH 1 fi
\ No newline at end of file diff --git a/ROMFS/px4fmu_common/init.d/rc.io b/ROMFS/px4fmu_common/init.d/rc.io index 6e8fdbc0f..e23aebd87 100644 --- a/ROMFS/px4fmu_common/init.d/rc.io +++ b/ROMFS/px4fmu_common/init.d/rc.io @@ -11,7 +11,7 @@ px4io recovery # Adjust PX4IO update rate limit # set PX4IO_LIMIT 400 -if hw_ver compare PX4FMU_V1 +if ver hwcmp PX4FMU_V1 then set PX4IO_LIMIT 200 fi diff --git a/ROMFS/px4fmu_common/init.d/rc.logging b/ROMFS/px4fmu_common/init.d/rc.logging index c5aef8273..25f31a7e0 100644 --- a/ROMFS/px4fmu_common/init.d/rc.logging +++ b/ROMFS/px4fmu_common/init.d/rc.logging @@ -5,12 +5,12 @@ if [ -d /fs/microsd ] then - if hw_ver compare PX4FMU_V1 + if ver hwcmp PX4FMU_V1 then echo "Start sdlog2 at 50Hz" - sdlog2 start -r 50 -a -b 8 -t + sdlog2 start -r 50 -a -b 4 -t else echo "Start sdlog2 at 200Hz" - sdlog2 start -r 200 -a -b 16 -t + sdlog2 start -r 200 -a -b 22 -t fi fi diff --git a/ROMFS/px4fmu_common/init.d/rc.mc_apps b/ROMFS/px4fmu_common/init.d/rc.mc_apps index ed3939757..268eb9bba 100644 --- a/ROMFS/px4fmu_common/init.d/rc.mc_apps +++ b/ROMFS/px4fmu_common/init.d/rc.mc_apps @@ -5,6 +5,7 @@ # attitude_estimator_ekf start +#ekf_att_pos_estimator start position_estimator_inav start mc_att_control start diff --git a/ROMFS/px4fmu_common/init.d/rc.mc_defaults b/ROMFS/px4fmu_common/init.d/rc.mc_defaults index e96c5b493..0df320f49 100644 --- a/ROMFS/px4fmu_common/init.d/rc.mc_defaults +++ b/ROMFS/px4fmu_common/init.d/rc.mc_defaults @@ -32,9 +32,16 @@ then param set MPC_Z_VEL_D 0.0 param set MPC_Z_VEL_MAX 3 param set MPC_Z_FF 0.5 - param set MPC_TILT_MAX 1.0 + param set MPC_TILTMAX_AIR 45.0 + param set MPC_TILTMAX_LND 15.0 param set MPC_LAND_SPEED 1.0 - param set MPC_LAND_TILT 0.3 + + param set PE_VELNE_NOISE 0.5 + param set PE_VELD_NOISE 0.7 + param set PE_POSNE_NOISE 0.5 + param set PE_POSD_NOISE 1.0 + + param set NAV_ACCEPT_RAD 2.0 fi set PWM_RATE 400 diff --git a/ROMFS/px4fmu_common/init.d/rc.sensors b/ROMFS/px4fmu_common/init.d/rc.sensors index 235be2431..1e14930fe 100644 --- a/ROMFS/px4fmu_common/init.d/rc.sensors +++ b/ROMFS/px4fmu_common/init.d/rc.sensors @@ -22,7 +22,7 @@ then echo "[init] Using L3GD20(H)" fi -if hw_ver compare PX4FMU_V2 +if ver hwcmp PX4FMU_V2 then if lsm303d start then diff --git a/ROMFS/px4fmu_common/init.d/rc.usb b/ROMFS/px4fmu_common/init.d/rc.usb index b7b556945..1f8d8b862 100644 --- a/ROMFS/px4fmu_common/init.d/rc.usb +++ b/ROMFS/px4fmu_common/init.d/rc.usb @@ -3,16 +3,22 @@ # USB MAVLink start # -echo "Starting MAVLink on this USB console" - -mavlink start -r 10000 -d /dev/ttyACM0 +mavlink start -r 10000 -d /dev/ttyACM0 -x # Enable a number of interesting streams we want via USB mavlink stream -d /dev/ttyACM0 -s NAMED_VALUE_FLOAT -r 10 +usleep 100000 mavlink stream -d /dev/ttyACM0 -s OPTICAL_FLOW -r 10 +usleep 100000 mavlink stream -d /dev/ttyACM0 -s VFR_HUD -r 20 +usleep 100000 mavlink stream -d /dev/ttyACM0 -s ATTITUDE -r 20 +usleep 100000 mavlink stream -d /dev/ttyACM0 -s ATTITUDE_CONTROLS -r 30 -mavlink stream -d /dev/ttyACM0 -s SERVO_OUTPUT_RAW_0 -r 10 +usleep 100000 +mavlink stream -d /dev/ttyACM0 -s SERVO_OUTPUT_RAW_0 -r 20 +usleep 100000 +mavlink stream -d /dev/ttyACM0 -s GLOBAL_POSITION_SETPOINT_INT -r 20 +usleep 100000 # Exit shell to make it available to MAVLink exit diff --git a/ROMFS/px4fmu_common/init.d/rcS b/ROMFS/px4fmu_common/init.d/rcS index 503dbb83e..f70e0ed77 100644 --- a/ROMFS/px4fmu_common/init.d/rcS +++ b/ROMFS/px4fmu_common/init.d/rcS @@ -20,7 +20,7 @@ echo "[init] Looking for microSD..." if mount -t vfat /dev/mmcsd0 /fs/microsd then set LOG_FILE /fs/microsd/bootlog.txt - echo "[init] microSD card mounted at /fs/microsd" + echo "[init] microSD mounted: /fs/microsd" # Start playing the startup tune tone_alarm start else @@ -65,12 +65,12 @@ then # Start CDC/ACM serial driver # sercon - + # # Start the ORB (first app to start) # uorb start - + # # Load parameters # @@ -79,29 +79,33 @@ then then set PARAM_FILE /fs/mtd_params fi - + param select $PARAM_FILE if param load then - echo "[init] Parameters loaded: $PARAM_FILE" + echo "[init] Params loaded: $PARAM_FILE" else - echo "[init] ERROR: Parameters loading failed: $PARAM_FILE" + echo "[init] ERROR: Params loading failed: $PARAM_FILE" fi - + # # Start system state indicator # if rgbled start then - echo "[init] Using external RGB Led" + echo "[init] RGB Led" else if blinkm start then - echo "[init] Using blinkm" + echo "[init] BlinkM" blinkm systemstate fi fi - + + if pca8574 start + then + fi + # # Set default values # @@ -120,7 +124,9 @@ then set EXIT_ON_END no set MAV_TYPE none set LOAD_DEFAULT_APPS yes - + set GPS yes + set GPS_FAKE no + # # Set DO_AUTOCONFIG flag to use it in AUTOSTART scripts # @@ -130,7 +136,7 @@ then else set DO_AUTOCONFIG no fi - + # # Set USE_IO flag # @@ -140,13 +146,13 @@ then else set USE_IO no fi - + # # Set parameters and env variables for selected AUTOSTART # if param compare SYS_AUTOSTART 0 then - echo "[init] Don't try to find autostart script" + echo "[init] No autostart" else sh /etc/init.d/rc.autostart fi @@ -156,10 +162,10 @@ then # if [ -f $CONFIG_FILE ] then - echo "[init] Reading config: $CONFIG_FILE" + echo "[init] Config: $CONFIG_FILE" sh $CONFIG_FILE else - echo "[init] Config file not found: $CONFIG_FILE" + echo "[init] Config not found: $CONFIG_FILE" fi # @@ -170,9 +176,9 @@ then param set SYS_AUTOCONFIG 0 param save fi - + set IO_PRESENT no - + if [ $USE_IO == yes ] then # @@ -184,19 +190,19 @@ then else set IO_FILE /etc/extras/px4io-v1_default.bin fi - + if px4io checkcrc $IO_FILE then echo "[init] PX4IO CRC OK" echo "PX4IO CRC OK" >> $LOG_FILE - + set IO_PRESENT yes else echo "[init] Trying to update" echo "PX4IO Trying to update" >> $LOG_FILE - + tone_alarm MLL32CP8MB - + if px4io forceupdate 14662 $IO_FILE then usleep 500000 @@ -205,7 +211,7 @@ then echo "[init] PX4IO CRC OK, update successful" echo "PX4IO CRC OK after updating" >> $LOG_FILE tone_alarm MLL8CDE - + set IO_PRESENT yes else echo "[init] ERROR: PX4IO update failed" @@ -218,14 +224,14 @@ then tone_alarm $TUNE_OUT_ERROR fi fi - + if [ $IO_PRESENT == no ] then echo "[init] ERROR: PX4IO not found" tone_alarm $TUNE_OUT_ERROR fi fi - + # # Set default output if not set # @@ -244,9 +250,9 @@ then # Need IO for output but it not present, disable output set OUTPUT_MODE none echo "[init] ERROR: PX4IO not found, disabling output" - + # Avoid using ttyS0 for MAVLink on FMUv1 - if hw_ver compare PX4FMU_V1 + if ver hwcmp PX4FMU_V1 then set FMU_MODE serial fi @@ -260,25 +266,25 @@ then if [ $HIL == yes ] then set OUTPUT_MODE hil - if hw_ver compare PX4FMU_V1 + if ver hwcmp PX4FMU_V1 then set FMU_MODE serial fi - else - # Try to get an USB console if not in HIL mode - nshterm /dev/ttyACM0 & fi - + + # Try to get an USB console + nshterm /dev/ttyACM0 & + # # Start the Commander (needs to be this early for in-air-restarts) # commander start - + # # Start primary output # set TTYS1_BUSY no - + # If OUTPUT_MODE == none then something is wrong with setup and we shouldn't try to enable output if [ $OUTPUT_MODE != none ] then @@ -294,6 +300,7 @@ then tone_alarm $TUNE_OUT_ERROR fi fi + if [ $OUTPUT_MODE == fmu -o $OUTPUT_MODE == ardrone ] then echo "[init] Use FMU as primary output" @@ -304,8 +311,8 @@ then echo "[init] ERROR: FMU mode_$FMU_MODE start failed" tone_alarm $TUNE_OUT_ERROR fi - - if hw_ver compare PX4FMU_V1 + + if ver hwcmp PX4FMU_V1 then if [ $FMU_MODE == pwm -o $FMU_MODE == gpio ] then @@ -317,6 +324,7 @@ then fi fi fi + if [ $OUTPUT_MODE == mkblctrl ] then echo "[init] Use MKBLCTRL as primary output" @@ -329,7 +337,7 @@ then then set MKBLCTRL_ARG "-mkmode +" fi - + if mkblctrl $MKBLCTRL_ARG then echo "[init] MKBLCTRL started" @@ -337,8 +345,9 @@ then echo "[init] ERROR: MKBLCTRL start failed" tone_alarm $TUNE_OUT_ERROR fi - - fi + + fi + if [ $OUTPUT_MODE == hil ] then echo "[init] Use HIL as primary output" @@ -350,7 +359,7 @@ then tone_alarm $TUNE_OUT_ERROR fi fi - + # # Start IO or FMU for RC PPM input if needed # @@ -377,8 +386,8 @@ then echo "[init] ERROR: FMU mode_$FMU_MODE start failed" tone_alarm $TUNE_OUT_ERROR fi - - if hw_ver compare PX4FMU_V1 + + if ver hwcmp PX4FMU_V1 then if [ $FMU_MODE == pwm -o $FMU_MODE == gpio ] then @@ -392,64 +401,50 @@ then fi fi fi - + # # MAVLink # - if [ $MAVLINK_FLAGS == default ] then - if [ $HIL == yes ] + # Normal mode, use baudrate 57600 (default) and data rate 1000 bytes/s + if [ $TTYS1_BUSY == yes ] then - sleep 1 - set MAVLINK_FLAGS "-r 10000 -d /dev/ttyACM0" - usleep 5000 + # Start MAVLink on ttyS0, because FMU ttyS1 pins configured as something else + set MAVLINK_FLAGS "-r 1000 -d /dev/ttyS0" + + # Exit from nsh to free port for mavlink + set EXIT_ON_END yes else - # Normal mode, use baudrate 57600 (default) and data rate 1000 bytes/s - if [ $TTYS1_BUSY == yes ] - then - # Start MAVLink on ttyS0, because FMU ttyS1 pins configured as something else - set MAVLINK_FLAGS "-r 1000 -d /dev/ttyS0" - usleep 5000 - - # Exit from nsh to free port for mavlink - set EXIT_ON_END yes - else - # Start MAVLink on default port: ttyS1 - set MAVLINK_FLAGS "-r 1000" - usleep 5000 - fi + # Start MAVLink on default port: ttyS1 + set MAVLINK_FLAGS "-r 1000" fi fi mavlink start $MAVLINK_FLAGS - usleep 5000 - - # - # Start the datamanager - # - dataman start - - # - # Start the navigator - # - navigator start - + # # Sensors, Logging, GPS # - echo "[init] Start sensors" sh /etc/init.d/rc.sensors - if [ $HIL == no ] + # + # Start logging in all modes, including HIL + # + sh /etc/init.d/rc.logging + + if [ $GPS == yes ] then - echo "[init] Start logging" - sh /etc/init.d/rc.logging - echo "[init] Start GPS" - gps start + if [ $GPS_FAKE == yes ] + then + echo "[init] Faking GPS" + gps start -f + else + gps start + fi fi - + # # Start up ARDrone Motor interface # @@ -464,24 +459,24 @@ then if [ $VEHICLE_TYPE == fw ] then echo "[init] Vehicle type: FIXED WING" - + if [ $MIXER == none ] then # Set default mixer for fixed wing if not defined set MIXER FMU_AERT fi - + if [ $MAV_TYPE == none ] then # Use MAV_TYPE = 1 (fixed wing) if not defined set MAV_TYPE 1 fi - + param set MAV_TYPE $MAV_TYPE - + # Load mixer and configure outputs sh /etc/init.d/rc.interface - + # Start standard fixedwing apps if [ $LOAD_DEFAULT_APPS == yes ] then @@ -516,7 +511,7 @@ then then set MAV_TYPE 13 fi - if [ $MIXER == hexa_cox ] + if [ $MIXER == FMU_hexa_cox ] then set MAV_TYPE 13 fi @@ -529,7 +524,7 @@ then set MAV_TYPE 14 fi fi - + # Still no MAV_TYPE found if [ $MAV_TYPE == none ] then @@ -537,10 +532,10 @@ then else param set MAV_TYPE $MAV_TYPE fi - + # Load mixer and configure outputs sh /etc/init.d/rc.interface - + # Start standard multicopter apps if [ $LOAD_DEFAULT_APPS == yes ] then @@ -549,6 +544,16 @@ then fi # + # Start the datamanager + # + dataman start + + # + # Start the navigator + # + navigator start + + # # Generic setup (autostart ID not found) # if [ $VEHICLE_TYPE == none ] @@ -563,7 +568,7 @@ then echo "[init] Starting addons script: $EXTRAS_FILE" sh $EXTRAS_FILE else - echo "[init] Addons script not found: $EXTRAS_FILE" + echo "[init] No addons script: $EXTRAS_FILE" fi if [ $EXIT_ON_END == yes ] diff --git a/ROMFS/px4fmu_common/mixers/hexa_cox.mix b/ROMFS/px4fmu_common/mixers/FMU_hexa_cox.mix index 497786feb..497786feb 100644 --- a/ROMFS/px4fmu_common/mixers/hexa_cox.mix +++ b/ROMFS/px4fmu_common/mixers/FMU_hexa_cox.mix diff --git a/ROMFS/px4fmu_common/mixers/README b/ROMFS/px4fmu_common/mixers/README new file mode 100644 index 000000000..60311232e --- /dev/null +++ b/ROMFS/px4fmu_common/mixers/README @@ -0,0 +1,154 @@ +PX4 mixer definitions +===================== + +Files in this directory implement example mixers that can be used as a basis +for customisation, or for general testing purposes. + +Mixer basics +------------ + +Mixers combine control values from various sources (control tasks, user inputs, +etc.) and produce output values suitable for controlling actuators; servos, +motors, switches and so on. + +An actuator derives its value from the combination of one or more control +values. Each of the control values is scaled according to the actuator's +configuration and then combined to produce the actuator value, which may then be +further scaled to suit the specific output type. + +Internally, all scaling is performed using floating point values. Inputs and +outputs are clamped to the range -1.0 to 1.0. + +control control control + | | | + v v v + scale scale scale + | | | + | v | + +-------> mix <------+ + | + scale + | + v + out + +Scaling +------- + +Basic scalers provide linear scaling of the input to the output. + +Each scaler allows the input value to be scaled independently for inputs +greater/less than zero. An offset can be applied to the output, and lower and +upper boundary constraints can be applied. Negative scaling factors cause the +output to be inverted (negative input produces positive output). + +Scaler pseudocode: + +if (input < 0) + output = (input * NEGATIVE_SCALE) + OFFSET +else + output = (input * POSITIVE_SCALE) + OFFSET + +if (output < LOWER_LIMIT) + output = LOWER_LIMIT +if (output > UPPER_LIMIT) + output = UPPER_LIMIT + +Syntax +------ + +Mixer definitions are text files; lines beginning with a single capital letter +followed by a colon are significant. All other lines are ignored, meaning that +explanatory text can be freely mixed with the definitions. + +Each file may define more than one mixer; the allocation of mixers to actuators +is specific to the device reading the mixer definition, and the number of +actuator outputs generated by a mixer is specific to the mixer. + +A mixer begins with a line of the form + + <tag>: <mixer arguments> + +The tag selects the mixer type; 'M' for a simple summing mixer, 'R' for a +multirotor mixer, etc. + +Null Mixer +.......... + +A null mixer consumes no controls and generates a single actuator output whose +value is always zero. Typically a null mixer is used as a placeholder in a +collection of mixers in order to achieve a specific pattern of actuator outputs. + +The null mixer definition has the form: + + Z: + +Simple Mixer +............ + +A simple mixer combines zero or more control inputs into a single actuator +output. Inputs are scaled, and the mixing function sums the result before +applying an output scaler. + +A simple mixer definition begins with: + + M: <control count> + O: <-ve scale> <+ve scale> <offset> <lower limit> <upper limit> + +If <control count> is zero, the sum is effectively zero and the mixer will +output a fixed value that is <offset> constrained by <lower limit> and <upper +limit>. + +The second line defines the output scaler with scaler parameters as discussed +above. Whilst the calculations are performed as floating-point operations, the +values stored in the definition file are scaled by a factor of 10000; i.e. an +offset of -0.5 is encoded as -5000. + +The definition continues with <control count> entries describing the control +inputs and their scaling, in the form: + + S: <group> <index> <-ve scale> <+ve scale> <offset> <lower limit> <upper limit> + +The <group> value identifies the control group from which the scaler will read, +and the <index> value an offset within that group. These values are specific to +the device reading the mixer definition. + +When used to mix vehicle controls, mixer group zero is the vehicle attitude +control group, and index values zero through three are normally roll, pitch, +yaw and thrust respectively. + +The remaining fields on the line configure the control scaler with parameters as +discussed above. Whilst the calculations are performed as floating-point +operations, the values stored in the definition file are scaled by a factor of +10000; i.e. an offset of -0.5 is encoded as -5000. + +Multirotor Mixer +................ + +The multirotor mixer combines four control inputs (roll, pitch, yaw, thrust) +into a set of actuator outputs intended to drive motor speed controllers. + +The mixer definition is a single line of the form: + +R: <geometry> <roll scale> <pitch scale> <yaw scale> <deadband> + +The supported geometries include: + + 4x - quadrotor in X configuration + 4+ - quadrotor in + configuration + 6x - hexcopter in X configuration + 6+ - hexcopter in + configuration + 8x - octocopter in X configuration + 8+ - octocopter in + configuration + +Each of the roll, pitch and yaw scale values determine scaling of the roll, +pitch and yaw controls relative to the thrust control. Whilst the calculations +are performed as floating-point operations, the values stored in the definition +file are scaled by a factor of 10000; i.e. an factor of 0.5 is encoded as 5000. + +Roll, pitch and yaw inputs are expected to range from -1.0 to 1.0, whilst the +thrust input ranges from 0.0 to 1.0. Output for each actuator is in the +range -1.0 to 1.0. + +In the case where an actuator saturates, all actuator values are rescaled so that +the saturating actuator is limited to 1.0.
\ No newline at end of file diff --git a/ROMFS/px4fmu_common/mixers/easystar.mix b/ROMFS/px4fmu_common/mixers/easystar.mix new file mode 100644 index 000000000..0051ffdbb --- /dev/null +++ b/ROMFS/px4fmu_common/mixers/easystar.mix @@ -0,0 +1,31 @@ +EASYSTAR / EASYSTAR II MIXER +============================ + +Aileron mixer +------------- +One output - would be easy to add support for 2 servos + +M: 1 +O: 10000 10000 0 -10000 10000 +S: 0 0 10000 10000 0 -10000 10000 + +Elevator mixer +------------ + +M: 1 +O: 10000 10000 0 -10000 10000 +S: 0 1 -10000 -10000 0 -10000 10000 + +Rudder mixer +------------ + +M: 1 +O: 10000 10000 0 -10000 10000 +S: 0 2 -10000 -10000 0 -10000 10000 + +Motor speed mixer +----------------- + +M: 1 +O: 10000 10000 0 -10000 10000 +S: 0 3 0 20000 -10000 -10000 10000 |