Add Gumstix AeroCore device

Based on the work of Andrew Smith [1], add board configuration and device
drivers to support the Gumstix AeroCore (previously Aerodroid) board [2]. The
AeroCore is an autopilot board based on a STM32F427 similar to the FMUv2.

[1] https://github.com/smithandrewc/Firmware
[2] https://store.gumstix.com/index.php/products/585/

Signed-off-by: Ash Charles <ashcharles@gmail.com>

2 files changed, 136 insertions, 0 deletions

diff --git a/makefiles/board_aerocore.mk b/makefiles/board_aerocore.mk
new file mode 100644
index 000000000..6f4b93266
--- /dev/null
+++ b/makefiles/board_aerocore.mk
@@ -0,0 +1,11 @@
+#
+# Board-specific definitions for the Gumstix AeroCore
+#
+
+#
+# Configure the toolchain
+#
+CONFIG_ARCH			 = CORTEXM4F
+CONFIG_BOARD			 = AEROCORE
+
+include $(PX4_MK_DIR)/toolchain_gnu-arm-eabi.mk
diff --git a/makefiles/config_aerocore_default.mk b/makefiles/config_aerocore_default.mk
new file mode 100644
index 000000000..e038500a6
--- /dev/null
+++ b/makefiles/config_aerocore_default.mk
@@ -0,0 +1,125 @@
+#
+# Makefile for the AeroCore *default* configuration
+#
+
+#
+# Use the configuration's ROMFS.
+#
+ROMFS_ROOT	 = $(PX4_BASE)/ROMFS/px4fmu_common
+
+#
+# Board support modules
+#
+MODULES		+= drivers/device
+MODULES		+= drivers/stm32
+MODULES		+= drivers/stm32/adc
+MODULES		+= drivers/stm32/tone_alarm
+MODULES		+= drivers/led
+MODULES		+= drivers/px4fmu
+MODULES		+= drivers/boards/aerocore
+MODULES		+= drivers/lsm303d
+MODULES		+= drivers/l3gd20
+MODULES		+= drivers/ms5611
+MODULES		+= drivers/gps
+MODULES		+= drivers/hil
+MODULES		+= modules/sensors
+
+#
+# System commands
+#
+MODULES		+= systemcmds/boardinfo
+MODULES		+= systemcmds/mixer
+MODULES		+= systemcmds/param
+MODULES		+= systemcmds/perf
+MODULES		+= systemcmds/preflight_check
+MODULES		+= systemcmds/pwm
+MODULES		+= systemcmds/esc_calib
+MODULES		+= systemcmds/reboot
+MODULES		+= systemcmds/top
+MODULES		+= systemcmds/config
+MODULES		+= systemcmds/nshterm
+MODULES		+= systemcmds/mtd
+MODULES		+= systemcmds/dumpfile
+
+#
+# General system control
+#
+MODULES		+= modules/commander
+MODULES		+= modules/navigator
+MODULES		+= modules/mavlink
+
+#
+# Estimation modules (EKF/ SO3 / other filters)
+#
+MODULES		+= modules/attitude_estimator_ekf
+MODULES		+= modules/attitude_estimator_so3
+MODULES		+= modules/fw_att_pos_estimator
+MODULES		+= modules/position_estimator_inav
+
+#
+# Vehicle Control
+#
+MODULES		+= modules/fw_pos_control_l1
+MODULES		+= modules/fw_att_control
+MODULES		+= modules/mc_att_control
+MODULES		+= modules/mc_pos_control
+
+#
+# Library modules
+#
+MODULES		+= modules/systemlib
+MODULES		+= modules/systemlib/mixer
+MODULES		+= modules/controllib
+MODULES		+= modules/uORB
+MODULES		+= modules/dataman
+
+#
+# Libraries
+#
+LIBRARIES	+= lib/mathlib/CMSIS
+MODULES		+= lib/mathlib
+MODULES		+= lib/mathlib/math/filter
+MODULES		+= lib/ecl
+MODULES		+= lib/external_lgpl
+MODULES		+= lib/geo
+MODULES		+= lib/conversion
+MODULES		+= lib/launchdetection
+
+#
+# Demo apps
+#
+#MODULES		+= examples/math_demo
+# Tutorial code from
+# https://pixhawk.ethz.ch/px4/dev/hello_sky
+MODULES		+= examples/px4_simple_app
+
+# Tutorial code from
+# https://pixhawk.ethz.ch/px4/dev/daemon
+#MODULES		+= examples/px4_daemon_app
+
+# Tutorial code from
+# https://pixhawk.ethz.ch/px4/dev/debug_values
+#MODULES		+= examples/px4_mavlink_debug
+
+# Tutorial code from
+# https://pixhawk.ethz.ch/px4/dev/example_fixedwing_control
+#MODULES			+= examples/fixedwing_control
+
+# Hardware test
+#MODULES			+= examples/hwtest
+
+#
+# Transitional support - add commands from the NuttX export archive.
+#
+# In general, these should move to modules over time.
+#
+# Each entry here is <command>.<priority>.<stacksize>.<entrypoint> but we use a helper macro
+# to make the table a bit more readable.
+#
+define _B
+	$(strip $1).$(or $(strip $2),SCHED_PRIORITY_DEFAULT).$(or $(strip $3),CONFIG_PTHREAD_STACK_DEFAULT).$(strip $4)
+endef
+
+BUILTIN_COMMANDS := \
+    $(call _B, hello, , 2048, hello_main) \
+    $(call _B, i2c, , 2048, i2c_main)