Merged master

9 files changed, 189 insertions, 19 deletions

diff --git a/makefiles/board_aerocore.mk b/makefiles/board_aerocore.mk
new file mode 100644
index 000000000..6f4b93266
--- /dev/null
+++ b/makefiles/board_aerocore.mk
@@ -0,0 +1,11 @@
+#
+# Board-specific definitions for the Gumstix AeroCore
+#
+
+#
+# Configure the toolchain
+#
+CONFIG_ARCH			 = CORTEXM4F
+CONFIG_BOARD			 = AEROCORE
+
+include $(PX4_MK_DIR)/toolchain_gnu-arm-eabi.mk
diff --git a/makefiles/config_aerocore_default.mk b/makefiles/config_aerocore_default.mk
new file mode 100644
index 000000000..0d3934bd0
--- /dev/null
+++ b/makefiles/config_aerocore_default.mk
@@ -0,0 +1,126 @@
+#
+# Makefile for the AeroCore *default* configuration
+#
+
+#
+# Use the configuration's ROMFS.
+#
+ROMFS_ROOT	 = $(PX4_BASE)/ROMFS/px4fmu_common
+
+#
+# Board support modules
+#
+MODULES		+= drivers/device
+MODULES		+= drivers/stm32
+MODULES		+= drivers/stm32/adc
+MODULES		+= drivers/stm32/tone_alarm
+MODULES		+= drivers/led
+MODULES		+= drivers/px4fmu
+MODULES		+= drivers/boards/aerocore
+MODULES		+= drivers/lsm303d
+MODULES		+= drivers/l3gd20
+MODULES		+= drivers/ms5611
+MODULES		+= drivers/gps
+MODULES		+= drivers/hil
+MODULES		+= modules/sensors
+
+#
+# System commands
+#
+MODULES		+= systemcmds/boardinfo
+MODULES		+= systemcmds/mixer
+MODULES		+= systemcmds/param
+MODULES		+= systemcmds/perf
+MODULES		+= systemcmds/preflight_check
+MODULES		+= systemcmds/pwm
+MODULES		+= systemcmds/esc_calib
+MODULES		+= systemcmds/reboot
+MODULES		+= systemcmds/top
+MODULES		+= systemcmds/config
+MODULES		+= systemcmds/nshterm
+MODULES		+= systemcmds/mtd
+MODULES		+= systemcmds/dumpfile
+
+#
+# General system control
+#
+MODULES		+= modules/commander
+MODULES		+= modules/navigator
+MODULES		+= modules/mavlink
+
+#
+# Estimation modules (EKF/ SO3 / other filters)
+#
+MODULES		+= modules/attitude_estimator_ekf
+MODULES		+= modules/attitude_estimator_so3
+MODULES		+= modules/ekf_att_pos_estimator
+MODULES		+= modules/position_estimator_inav
+
+#
+# Vehicle Control
+#
+MODULES		+= modules/fw_pos_control_l1
+MODULES		+= modules/fw_att_control
+MODULES		+= modules/mc_att_control
+MODULES		+= modules/mc_pos_control
+
+#
+# Library modules
+#
+MODULES		+= modules/systemlib
+MODULES		+= modules/systemlib/mixer
+MODULES		+= modules/controllib
+MODULES		+= modules/uORB
+MODULES		+= modules/dataman
+
+#
+# Libraries
+#
+LIBRARIES	+= lib/mathlib/CMSIS
+MODULES		+= lib/mathlib
+MODULES		+= lib/mathlib/math/filter
+MODULES		+= lib/ecl
+MODULES		+= lib/external_lgpl
+MODULES		+= lib/geo
+MODULES		+= lib/geo_lookup
+MODULES		+= lib/conversion
+MODULES		+= lib/launchdetection
+
+#
+# Demo apps
+#
+#MODULES		+= examples/math_demo
+# Tutorial code from
+# https://pixhawk.ethz.ch/px4/dev/hello_sky
+MODULES		+= examples/px4_simple_app
+
+# Tutorial code from
+# https://pixhawk.ethz.ch/px4/dev/daemon
+#MODULES		+= examples/px4_daemon_app
+
+# Tutorial code from
+# https://pixhawk.ethz.ch/px4/dev/debug_values
+#MODULES		+= examples/px4_mavlink_debug
+
+# Tutorial code from
+# https://pixhawk.ethz.ch/px4/dev/example_fixedwing_control
+#MODULES			+= examples/fixedwing_control
+
+# Hardware test
+#MODULES			+= examples/hwtest
+
+#
+# Transitional support - add commands from the NuttX export archive.
+#
+# In general, these should move to modules over time.
+#
+# Each entry here is <command>.<priority>.<stacksize>.<entrypoint> but we use a helper macro
+# to make the table a bit more readable.
+#
+define _B
+	$(strip $1).$(or $(strip $2),SCHED_PRIORITY_DEFAULT).$(or $(strip $3),CONFIG_PTHREAD_STACK_DEFAULT).$(strip $4)
+endef
+
+BUILTIN_COMMANDS := \
+    $(call _B, hello, , 2048, hello_main) \
+    $(call _B, i2c, , 2048, i2c_main)
diff --git a/makefiles/config_px4fmu-v1_default.mk b/makefiles/config_px4fmu-v1_default.mk
index 532e978d0..a7c10f52f 100644
--- a/makefiles/config_px4fmu-v1_default.mk
+++ b/makefiles/config_px4fmu-v1_default.mk
@@ -25,6 +25,7 @@ MODULES		+= drivers/mpu6000
 MODULES		+= drivers/hmc5883
 MODULES		+= drivers/ms5611
 MODULES		+= drivers/mb12xx
+MODULES		+= drivers/ll40ls
 MODULES		+= drivers/gps
 MODULES		+= drivers/hil
 MODULES		+= drivers/hott/hott_telemetry
@@ -52,11 +53,10 @@ MODULES		+= systemcmds/pwm
 MODULES		+= systemcmds/esc_calib
 MODULES		+= systemcmds/reboot
 MODULES		+= systemcmds/top
-MODULES		+= systemcmds/tests
 MODULES		+= systemcmds/config
 MODULES		+= systemcmds/nshterm
-MODULES		+= systemcmds/hw_ver
 MODULES		+= systemcmds/dumpfile
+MODULES		+= systemcmds/ver
 
 #
 # General system control
@@ -67,12 +67,11 @@ MODULES		+= modules/mavlink
 MODULES		+= modules/gpio_led
 
 #
-# Estimation modules (EKF/ SO3 / other filters)
+# Estimation modules (EKF / other filters)
 #
 MODULES		+= modules/attitude_estimator_ekf
-MODULES		+= modules/fw_att_pos_estimator
+MODULES		+= modules/ekf_att_pos_estimator
 MODULES		+= modules/position_estimator_inav
-#MODULES		+= examples/flow_position_estimator
 
 #
 # Vehicle Control
@@ -81,8 +80,6 @@ MODULES		+= modules/fw_pos_control_l1
 MODULES		+= modules/fw_att_control
 MODULES		+= modules/mc_att_control
 MODULES		+= modules/mc_pos_control
-#MODULES		+= examples/flow_position_control
-#MODULES		+= examples/flow_speed_control
 
 #
 # Logging
@@ -113,6 +110,7 @@ MODULES		+= lib/mathlib/math/filter
 MODULES		+= lib/ecl
 MODULES		+= lib/external_lgpl
 MODULES		+= lib/geo
+MODULES		+= lib/geo_lookup
 MODULES		+= lib/conversion
 MODULES		+= lib/launchdetection
 
diff --git a/makefiles/config_px4fmu-v2_default.mk b/makefiles/config_px4fmu-v2_default.mk
index 5677684b3..7e22c9a94 100644
--- a/makefiles/config_px4fmu-v2_default.mk
+++ b/makefiles/config_px4fmu-v2_default.mk
@@ -28,18 +28,19 @@ MODULES		+= drivers/hmc5883
 MODULES		+= drivers/ms5611
 MODULES		+= drivers/mb12xx
 MODULES		+= drivers/sf0x
+MODULES		+= drivers/ll40ls
 MODULES		+= drivers/gps
 MODULES		+= drivers/hil
 MODULES		+= drivers/hott/hott_telemetry
 MODULES		+= drivers/hott/hott_sensors
 MODULES		+= drivers/blinkm
-MODULES		+= drivers/roboclaw
 MODULES		+= drivers/airspeed
 MODULES		+= drivers/ets_airspeed
 MODULES		+= drivers/meas_airspeed
 MODULES		+= drivers/frsky_telemetry
 MODULES		+= modules/sensors
 MODULES		+= drivers/mkblctrl
+MODULES		+= drivers/pca8574
 
 
 # Needs to be burned to the ground and re-written; for now,
@@ -63,8 +64,8 @@ MODULES		+= systemcmds/tests
 MODULES		+= systemcmds/config
 MODULES		+= systemcmds/nshterm
 MODULES		+= systemcmds/mtd
-MODULES		+= systemcmds/hw_ver
 MODULES		+= systemcmds/dumpfile
+MODULES		+= systemcmds/ver
 
 #
 # General system control
@@ -73,13 +74,14 @@ MODULES		+= modules/commander
 MODULES		+= modules/navigator
 MODULES		+= modules/mavlink
 MODULES		+= modules/gpio_led
+MODULES		+= modules/uavcan
 
 #
 # Estimation modules (EKF/ SO3 / other filters)
 #
 MODULES		+= modules/attitude_estimator_ekf
 MODULES		+= modules/attitude_estimator_so3
-MODULES		+= modules/fw_att_pos_estimator
+MODULES		+= modules/ekf_att_pos_estimator
 MODULES		+= modules/position_estimator_inav
 MODULES		+= examples/flow_position_estimator
 
@@ -121,6 +123,7 @@ MODULES		+= lib/mathlib/math/filter
 MODULES		+= lib/ecl
 MODULES		+= lib/external_lgpl
 MODULES		+= lib/geo
+MODULES		+= lib/geo_lookup
 MODULES		+= lib/conversion
 MODULES		+= lib/launchdetection
 
diff --git a/makefiles/config_px4fmu-v2_test.mk b/makefiles/config_px4fmu-v2_test.mk
index 79922374d..932f92261 100644
--- a/makefiles/config_px4fmu-v2_test.mk
+++ b/makefiles/config_px4fmu-v2_test.mk
@@ -24,12 +24,19 @@ MODULES		+= drivers/lsm303d
 MODULES		+= drivers/l3gd20
 MODULES		+= drivers/hmc5883
 MODULES		+= drivers/ms5611
+MODULES		+= drivers/pca8574
+MODULES		+= drivers/roboclaw
 MODULES		+= systemcmds/perf
 MODULES		+= systemcmds/reboot
 MODULES		+= systemcmds/tests
 MODULES		+= systemcmds/nshterm
 MODULES		+= systemcmds/mtd
-MODULES		+= systemcmds/hw_ver
+MODULES		+= systemcmds/ver
+
+#
+# Testing modules
+#
+MODULES		+= examples/matlab_csv_serial
 
 #
 # Library modules
@@ -40,6 +47,7 @@ MODULES		+= modules/uORB
 LIBRARIES	+= lib/mathlib/CMSIS
 MODULES		+= lib/mathlib
 MODULES		+= lib/mathlib/math/filter
+MODULES		+= lib/conversion
 
 #
 # Libraries
diff --git a/makefiles/firmware.mk b/makefiles/firmware.mk
index 1b646d9e0..60602e76f 100644
--- a/makefiles/firmware.mk
+++ b/makefiles/firmware.mk
@@ -113,7 +113,7 @@ endif
 $(info %  GIT_DESC            = $(GIT_DESC))
 
 #
-# Set a default target so that included makefiles or errors here don't 
+# Set a default target so that included makefiles or errors here don't
 # cause confusion.
 #
 # XXX We could do something cute here with $(DEFAULT_GOAL) if it's not one
@@ -177,7 +177,7 @@ GLOBAL_DEPS		+= $(MAKEFILE_LIST)
 #
 # Extra things we should clean
 #
-EXTRA_CLEANS		 = 
+EXTRA_CLEANS		 =
 
 
 #
@@ -371,6 +371,8 @@ $(ROMFS_IMG): $(ROMFS_SCRATCH) $(ROMFS_DEPS) $(GLOBAL_DEPS)
 $(ROMFS_SCRATCH): $(ROMFS_DEPS) $(GLOBAL_DEPS)
 	$(Q) $(MKDIR) -p $(ROMFS_SCRATCH)
 	$(Q) $(COPYDIR) $(ROMFS_ROOT)/* $(ROMFS_SCRATCH)
+# delete all files in ROMFS_SCRATCH which start with a . or end with a ~
+	$(Q) $(RM) $(ROMFS_SCRATCH)/*/.[!.]* $(ROMFS_SCRATCH)/*/*~
 ifneq ($(ROMFS_EXTRA_FILES),)
 	$(Q) $(MKDIR) -p $(ROMFS_SCRATCH)/extras
 	$(Q) $(COPY) $(ROMFS_EXTRA_FILES) $(ROMFS_SCRATCH)/extras
diff --git a/makefiles/nuttx.mk b/makefiles/nuttx.mk
index d283096b2..bf0744140 100644
--- a/makefiles/nuttx.mk
+++ b/makefiles/nuttx.mk
@@ -64,6 +64,7 @@ LDSCRIPT		+= $(NUTTX_EXPORT_DIR)build/ld.script
 # Add directories from the NuttX export to the relevant search paths
 #
 INCLUDE_DIRS		+= $(NUTTX_EXPORT_DIR)include \
+			   $(NUTTX_EXPORT_DIR)include/cxx \
 			   $(NUTTX_EXPORT_DIR)arch/chip \
 			   $(NUTTX_EXPORT_DIR)arch/common
 
diff --git a/makefiles/setup.mk b/makefiles/setup.mk
index 183b143d6..4bfa7a087 100644
--- a/makefiles/setup.mk
+++ b/makefiles/setup.mk
@@ -46,8 +46,10 @@ export PX4_MODULE_SRC	 = $(abspath $(PX4_BASE)/src)/
 export PX4_LIB_DIR	 = $(abspath $(PX4_BASE)/src/lib)/
 export PX4_MK_DIR	 = $(abspath $(PX4_BASE)/makefiles)/
 export NUTTX_SRC	 = $(abspath $(PX4_BASE)/NuttX/nuttx)/
+export MAVLINK_SRC	 = $(abspath $(PX4_BASE)/mavlink/include/mavlink/v1.0)/
 export NUTTX_APP_SRC	 = $(abspath $(PX4_BASE)/NuttX/apps)/
 export MAVLINK_SRC	 = $(abspath $(PX4_BASE)/mavlink)/
+export UAVCAN_DIR	 = $(abspath $(PX4_BASE)/uavcan)/
 export ROMFS_SRC	 = $(abspath $(PX4_BASE)/ROMFS)/
 export IMAGE_DIR	 = $(abspath $(PX4_BASE)/Images)/
 export BUILD_DIR	 = $(abspath $(PX4_BASE)/Build)/
diff --git a/makefiles/toolchain_gnu-arm-eabi.mk b/makefiles/toolchain_gnu-arm-eabi.mk
index bb729e103..71c7fb49f 100644
--- a/makefiles/toolchain_gnu-arm-eabi.mk
+++ b/makefiles/toolchain_gnu-arm-eabi.mk
@@ -1,5 +1,5 @@
 #
-#   Copyright (C) 2012 PX4 Development Team. All rights reserved.
+#   Copyright (C) 2012-2014 PX4 Development Team. All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -48,6 +48,16 @@ NM			 = $(CROSSDEV)nm
 OBJCOPY			 = $(CROSSDEV)objcopy
 OBJDUMP			 = $(CROSSDEV)objdump
 
+# Check if the right version of the toolchain is available
+#
+CROSSDEV_VER_SUPPORTED	 = 4.7
+CROSSDEV_VER_FOUND	 = $(shell $(CC) -dumpversion)
+
+ifeq (,$(findstring $(CROSSDEV_VER_SUPPORTED),$(CROSSDEV_VER_FOUND)))
+$(error Unsupported version of $(CC), found: $(CROSSDEV_VER_FOUND) instead of $(CROSSDEV_VER_SUPPORTED).x)
+endif
+
+
 # XXX this is pulled pretty directly from the fmu Make.defs - needs cleanup
 
 MAXOPTIMIZATION		 ?= -O3
@@ -76,7 +86,7 @@ ARCHINSTRUMENTATIONDEFINES_CORTEXM4F = -finstrument-functions \
 ARCHINSTRUMENTATIONDEFINES_CORTEXM4 = -finstrument-functions \
 			   -ffixed-r10
 
-ARCHINSTRUMENTATIONDEFINES_CORTEXM3 = 
+ARCHINSTRUMENTATIONDEFINES_CORTEXM3 =
 
 # Pick the right set of flags for the architecture.
 #
@@ -111,7 +121,7 @@ INSTRUMENTATIONDEFINES	 = $(ARCHINSTRUMENTATIONDEFINES_$(CONFIG_ARCH))
 # Language-specific flags
 #
 ARCHCFLAGS		 = -std=gnu99
-ARCHCXXFLAGS		 = -fno-exceptions -fno-rtti -std=gnu++0x
+ARCHCXXFLAGS		 = -fno-exceptions -fno-rtti -std=gnu++0x -fno-threadsafe-statics
 
 # Generic warnings
 #
@@ -125,7 +135,15 @@ ARCHWARNINGS		 = -Wall \
 			   -Wlogical-op \
 			   -Wmissing-declarations \
 			   -Wpacked \
-			   -Wno-unused-parameter
+			   -Wno-unused-parameter \
+			   -Werror=format-security \
+			   -Werror=array-bounds \
+			   -Wfatal-errors \
+			   -Wformat=1 \
+			   -Werror=unused-but-set-variable \
+			   -Werror=unused-variable \
+			   -Werror=double-promotion \
+			   -Werror=reorder
 #   -Wcast-qual  - generates spurious noreturn attribute warnings, try again later
 #   -Wconversion - would be nice, but too many "risky-but-safe" conversions in the code
 #   -Wcast-align - would help catch bad casts in some cases, but generates too many false positives
@@ -142,7 +160,8 @@ ARCHCWARNINGS		 = $(ARCHWARNINGS) \
 
 # C++-specific warnings
 #
-ARCHWARNINGSXX		 = $(ARCHWARNINGS)
+ARCHWARNINGSXX		 = $(ARCHWARNINGS) \
+			   -Wno-missing-field-initializers
 
 # pull in *just* libm from the toolchain ... this is grody
 LIBM			:= $(shell $(CC) $(ARCHCPUFLAGS) -print-file-name=libm.a)
@@ -260,7 +279,7 @@ define SYM_TO_BIN
 	$(Q) $(OBJCOPY) -O binary $1 $2
 endef
 
-# Take the raw binary $1 and make it into an object file $2. 
+# Take the raw binary $1 and make it into an object file $2.
 # The symbol $3 points to the beginning of the file, and $3_len
 # gives its length.
 #