diff options
author | px4dev <px4@purgatory.org> | 2013-08-02 22:34:55 -0700 |
---|---|---|
committer | px4dev <px4@purgatory.org> | 2013-08-02 22:34:55 -0700 |
commit | 9d6ec6b3655fcd902be7a7fe4f2a24033c714afb (patch) | |
tree | 6093f77bca4fce924d3cce0e4ed065344a063f82 /nuttx-configs/px4fmu-v2 | |
parent | a9c1882ea01aa0cf00448bc874c97087853bb13c (diff) | |
download | px4-firmware-9d6ec6b3655fcd902be7a7fe4f2a24033c714afb.tar.gz px4-firmware-9d6ec6b3655fcd902be7a7fe4f2a24033c714afb.tar.bz2 px4-firmware-9d6ec6b3655fcd902be7a7fe4f2a24033c714afb.zip |
Restructure things so that the PX4 configs move out of the NuttX tree, and most of the PX4-specific board configuration data moves out of the config and into the board driver.
Rename some directories that got left behind in the great board renaming.
Diffstat (limited to 'nuttx-configs/px4fmu-v2')
-rwxr-xr-x | nuttx-configs/px4fmu-v2/include/board.h | 58 |
1 files changed, 0 insertions, 58 deletions
diff --git a/nuttx-configs/px4fmu-v2/include/board.h b/nuttx-configs/px4fmu-v2/include/board.h index a6cdfb4d2..507df70a2 100755 --- a/nuttx-configs/px4fmu-v2/include/board.h +++ b/nuttx-configs/px4fmu-v2/include/board.h @@ -194,11 +194,6 @@ #define DMAMAP_SDIO DMAMAP_SDIO_1 -/* High-resolution timer - */ -#define HRT_TIMER 8 /* use timer8 for the HRT */ -#define HRT_TIMER_CHANNEL 1 /* use capture/compare channel */ - /* Alternate function pin selections ************************************************/ /* @@ -232,35 +227,12 @@ #define DMAMAP_USART1_RX DMAMAP_USART1_RX_2 #define DMAMAP_USART6_RX DMAMAP_USART6_RX_2 -/* - * PWM - * - * Six PWM outputs are configured. - * - * Pins: - * - * CH1 : PE14 : TIM1_CH4 - * CH2 : PE13 : TIM1_CH3 - * CH3 : PE11 : TIM1_CH2 - * CH4 : PE9 : TIM1_CH1 - * CH5 : PD13 : TIM4_CH2 - * CH6 : PD14 : TIM4_CH3 - * - */ -#define GPIO_TIM1_CH1OUT GPIO_TIM1_CH1OUT_2 -#define GPIO_TIM1_CH2OUT GPIO_TIM1_CH2OUT_2 -#define GPIO_TIM1_CH3OUT GPIO_TIM1_CH3OUT_2 -#define GPIO_TIM1_CH4OUT GPIO_TIM1_CH4OUT_2 -#define GPIO_TIM4_CH2OUT GPIO_TIM4_CH2OUT_2 -#define GPIO_TIM4_CH3OUT GPIO_TIM4_CH3OUT_2 - /* * CAN * * CAN1 is routed to the onboard transceiver. * CAN2 is routed to the expansion connector. */ - #define GPIO_CAN1_RX GPIO_CAN1_RX_3 #define GPIO_CAN1_TX GPIO_CAN1_TX_3 #define GPIO_CAN2_RX GPIO_CAN2_RX_1 @@ -284,20 +256,6 @@ #define GPIO_I2C2_SDA_GPIO (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN11) /* - * I2C busses - */ -#define PX4_I2C_BUS_EXPANSION 1 -#define PX4_I2C_BUS_LED 2 - -/* - * Devices on the onboard bus. - * - * Note that these are unshifted addresses. - */ -#define PX4_I2C_OBDEV_LED 0x55 -#define PX4_I2C_OBDEV_HMC5883 0x1e - -/* * SPI * * There are sensors on SPI1, and SPI2 is connected to the FRAM. @@ -310,22 +268,6 @@ #define GPIO_SPI2_MOSI GPIO_SPI2_MOSI_1 #define GPIO_SPI2_SCK GPIO_SPI2_SCK_2 -/* - * Use these in place of the spi_dev_e enumeration to - * select a specific SPI device on SPI1 - */ -#define PX4_SPIDEV_GYRO 1 -#define PX4_SPIDEV_ACCEL_MAG 2 -#define PX4_SPIDEV_BARO 3 - -/* - * Tone alarm output - */ -#define TONE_ALARM_TIMER 2 /* timer 2 */ -#define TONE_ALARM_CHANNEL 1 /* channel 1 */ -#define GPIO_TONE_ALARM_IDLE (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN15) -#define GPIO_TONE_ALARM (GPIO_ALT|GPIO_AF1|GPIO_SPEED_2MHz|GPIO_PUSHPULL|GPIO_PORTA|GPIO_PIN15) - /************************************************************************************ * Public Data ************************************************************************************/ |