Move NuttX configurations out of the NuttX tree proper. This reduces the diffs we have to carry against the NuttX upstream repo to just our local patches to the NuttX code itself.

9 files changed, 1194 insertions, 0 deletions

diff --git a/nuttx-configs/px4io-v1/include/README.txt b/nuttx-configs/px4io-v1/include/README.txt
new file mode 100755
index 000000000..2264a80aa
--- /dev/null
+++ b/nuttx-configs/px4io-v1/include/README.txt
@@ -0,0 +1 @@
+This directory contains header files unique to the PX4IO board.
diff --git a/nuttx-configs/px4io-v1/include/board.h b/nuttx-configs/px4io-v1/include/board.h
new file mode 100755
index 000000000..668602ea8
--- /dev/null
+++ b/nuttx-configs/px4io-v1/include/board.h
@@ -0,0 +1,172 @@
+/************************************************************************************
+ * configs/px4io/include/board.h
+ * include/arch/board/board.h
+ *
+ *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __ARCH_BOARD_BOARD_H
+#define __ARCH_BOARD_BOARD_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+#ifndef __ASSEMBLY__
+# include <stdint.h>
+# include <stdbool.h>
+#endif
+#include <stm32_rcc.h>
+#include <stm32_sdio.h>
+#include <stm32.h>
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* Clocking *************************************************************************/
+
+/* On-board crystal frequency is 24MHz (HSE) */
+
+#define STM32_BOARD_XTAL        24000000ul
+
+/* Use the HSE output as the system clock */
+
+#define STM32_SYSCLK_SW         RCC_CFGR_SW_HSE
+#define STM32_SYSCLK_SWS        RCC_CFGR_SWS_HSE
+#define STM32_SYSCLK_FREQUENCY  STM32_BOARD_XTAL
+
+/* AHB clock (HCLK) is SYSCLK (24MHz) */
+
+#define STM32_RCC_CFGR_HPRE     RCC_CFGR_HPRE_SYSCLK
+#define STM32_HCLK_FREQUENCY    STM32_SYSCLK_FREQUENCY
+#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY    /* same as above, to satisfy compiler */
+
+/* APB2 clock (PCLK2) is HCLK (24MHz) */
+
+#define STM32_RCC_CFGR_PPRE2    RCC_CFGR_PPRE2_HCLK
+#define STM32_PCLK2_FREQUENCY   STM32_HCLK_FREQUENCY
+#define STM32_APB2_CLKIN        (STM32_PCLK2_FREQUENCY)   /* Timers 2-4 */
+
+/* APB2 timer 1 will receive PCLK2. */
+
+#define STM32_APB2_TIM1_CLKIN   (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM8_CLKIN   (STM32_PCLK2_FREQUENCY)
+
+/* APB1 clock (PCLK1) is HCLK (24MHz) */
+
+#define STM32_RCC_CFGR_PPRE1    RCC_CFGR_PPRE1_HCLK
+#define STM32_PCLK1_FREQUENCY   (STM32_HCLK_FREQUENCY)
+
+/* All timers run off PCLK */
+
+#define STM32_APB1_TIM1_CLKIN   (STM32_PCLK2_FREQUENCY)
+#define STM32_APB1_TIM2_CLKIN   (STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM3_CLKIN   (STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM4_CLKIN   (STM32_PCLK1_FREQUENCY)
+
+/*
+ * Some of the USART pins are not available; override the GPIO
+ * definitions with an invalid pin configuration.
+ */
+#undef GPIO_USART2_CTS
+#define GPIO_USART2_CTS	0xffffffff
+#undef GPIO_USART2_RTS
+#define GPIO_USART2_RTS	0xffffffff
+#undef GPIO_USART2_CK
+#define GPIO_USART2_CK 	0xffffffff
+#undef GPIO_USART3_TX
+#define GPIO_USART3_TX 	0xffffffff
+#undef GPIO_USART3_CK
+#define GPIO_USART3_CK 	0xffffffff
+#undef GPIO_USART3_CTS
+#define GPIO_USART3_CTS	0xffffffff
+#undef GPIO_USART3_RTS
+#define GPIO_USART3_RTS	0xffffffff
+
+/* 
+ * High-resolution timer
+ */
+#ifdef CONFIG_HRT_TIMER
+# define HRT_TIMER		1	/* use timer1 for the HRT */
+# define HRT_TIMER_CHANNEL	2	/* use capture/compare channel 2 */
+#endif
+
+/*
+ * PPM
+ *
+ * PPM input is handled by the HRT timer.
+ *
+ * Pin is PA8, timer 1, channel 1
+ */
+#if defined(CONFIG_HRT_TIMER) && defined (CONFIG_HRT_PPM)
+# define HRT_PPM_CHANNEL	1	/* use capture/compare channel 1 */
+# define GPIO_PPM_IN		GPIO_TIM1_CH1IN
+#endif
+
+/************************************************************************************
+ * Public Data
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+#undef EXTERN
+#if defined(__cplusplus)
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+/************************************************************************************
+ * Public Function Prototypes
+ ************************************************************************************/
+/************************************************************************************
+ * Name: stm32_boardinitialize
+ *
+ * Description:
+ *   All STM32 architectures must provide the following entry point.  This entry point
+ *   is called early in the intitialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+EXTERN void stm32_boardinitialize(void);
+    
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif  /* __ARCH_BOARD_BOARD_H */
diff --git a/nuttx-configs/px4io-v1/nsh/Make.defs b/nuttx-configs/px4io-v1/nsh/Make.defs
new file mode 100644
index 000000000..712631f47
--- /dev/null
+++ b/nuttx-configs/px4io-v1/nsh/Make.defs
@@ -0,0 +1,166 @@
+############################################################################
+# configs/px4io-v1/nsh/Make.defs
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+include ${TOPDIR}/tools/Config.mk
+
+#
+# We only support building with the ARM bare-metal toolchain from
+# https://launchpad.net/gcc-arm-embedded on Windows, Linux or Mac OS.
+#
+CONFIG_ARMV7M_TOOLCHAIN	:= GNU_EABI
+
+include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
+
+CC			 = $(CROSSDEV)gcc
+CXX			 = $(CROSSDEV)g++
+CPP			 = $(CROSSDEV)gcc -E
+LD			 = $(CROSSDEV)ld
+AR			 = $(CROSSDEV)ar rcs
+NM			 = $(CROSSDEV)nm
+OBJCOPY			 = $(CROSSDEV)objcopy
+OBJDUMP			 = $(CROSSDEV)objdump
+
+MAXOPTIMIZATION		 = -O3
+ARCHCPUFLAGS		 = -mcpu=cortex-m3 \
+			   -mthumb \
+			   -march=armv7-m
+
+# use our linker script
+LDSCRIPT		 = ld.script
+
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  DIRLINK		 = $(TOPDIR)/tools/copydir.sh
+  DIRUNLINK		 = $(TOPDIR)/tools/unlink.sh
+  MKDEP			 = $(TOPDIR)/tools/mknulldeps.sh
+  ARCHINCLUDES		 = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+  ARCHXXINCLUDES	 = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+  ARCHSCRIPT		 = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
+else
+  ifeq ($(PX4_WINTOOL),y)
+    # Windows-native toolchains (MSYS)
+    DIRLINK		 = $(TOPDIR)/tools/copydir.sh
+    DIRUNLINK		 = $(TOPDIR)/tools/unlink.sh
+    MKDEP		 = $(TOPDIR)/tools/mknulldeps.sh
+    ARCHINCLUDES	 = -I. -isystem $(TOPDIR)/include
+    ARCHXXINCLUDES	 = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+    ARCHSCRIPT		 = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
+  else
+    # Linux/Cygwin-native toolchain 
+    MKDEP		 = $(TOPDIR)/tools/mkdeps.sh
+    ARCHINCLUDES	 = -I. -isystem $(TOPDIR)/include
+    ARCHXXINCLUDES	 = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+    ARCHSCRIPT		 = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
+  endif
+endif
+
+# tool versions
+ARCHCCVERSION		 = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR		 = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+# optimisation flags
+ARCHOPTIMIZATION	 = $(MAXOPTIMIZATION) \
+			   -fno-strict-aliasing \
+			   -fno-strength-reduce \
+			   -fomit-frame-pointer \
+   			   -funsafe-math-optimizations \
+   			   -fno-builtin-printf \
+   			   -ffunction-sections \
+   			   -fdata-sections
+
+ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
+ARCHOPTIMIZATION	+= -g
+endif
+
+ARCHCFLAGS		 = -std=gnu99
+ARCHCXXFLAGS		 = -fno-exceptions -fno-rtti -std=gnu++0x
+ARCHWARNINGS		 = -Wall \
+			   -Wextra \
+			   -Wdouble-promotion \
+			   -Wshadow \
+			   -Wfloat-equal \
+			   -Wframe-larger-than=1024 \
+			   -Wpointer-arith \
+			   -Wlogical-op \
+			   -Wmissing-declarations \
+			   -Wpacked \
+			   -Wno-unused-parameter
+#   -Wcast-qual  - generates spurious noreturn attribute warnings, try again later
+#   -Wconversion - would be nice, but too many "risky-but-safe" conversions in the code
+#   -Wcast-align - would help catch bad casts in some cases, but generates too many false positives
+
+ARCHCWARNINGS		 = $(ARCHWARNINGS) \
+			   -Wbad-function-cast \
+			   -Wstrict-prototypes \
+			   -Wold-style-declaration \
+			   -Wmissing-parameter-type \
+			   -Wmissing-prototypes \
+			   -Wnested-externs \
+			   -Wunsuffixed-float-constants
+ARCHWARNINGSXX		 = $(ARCHWARNINGS)
+ARCHDEFINES		 = 
+ARCHPICFLAGS		 = -fpic -msingle-pic-base -mpic-register=r10
+
+# this seems to be the only way to add linker flags
+EXTRA_LIBS		+= --warn-common \
+			   --gc-sections
+
+CFLAGS			 = $(ARCHCFLAGS) $(ARCHCWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -fno-common
+CPICFLAGS		 = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS		 = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS		 = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS		 = $(ARCHINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS			 = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1		 = -r -d -warn-common
+NXFLATLDFLAGS2		 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
+LDNXFLATFLAGS		 = -e main -s 2048
+
+OBJEXT			 = .o
+LIBEXT			 = .a
+EXEEXT			 =
+
+# produce partially-linked $1 from files in $2
+define PRELINK
+	@echo "PRELINK: $1"
+	$(Q) $(LD) -Ur -o $1 $2 && $(OBJCOPY) --localize-hidden $1
+endef
+
+HOSTCC			 = gcc
+HOSTINCLUDES		 = -I.
+HOSTCFLAGS		 = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS		 =
+
diff --git a/nuttx-configs/px4io-v1/nsh/appconfig b/nuttx-configs/px4io-v1/nsh/appconfig
new file mode 100644
index 000000000..48a41bcdb
--- /dev/null
+++ b/nuttx-configs/px4io-v1/nsh/appconfig
@@ -0,0 +1,32 @@
+############################################################################
+#
+#   Copyright (C) 2012 PX4 Development Team. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name PX4 nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
diff --git a/nuttx-configs/px4io-v1/nsh/defconfig b/nuttx-configs/px4io-v1/nsh/defconfig
new file mode 100755
index 000000000..525672233
--- /dev/null
+++ b/nuttx-configs/px4io-v1/nsh/defconfig
@@ -0,0 +1,559 @@
+############################################################################
+# configs/px4io-v1/nsh/defconfig
+#
+#   Copyright (C) 2012 PX4 Development Team. All rights reserved.
+#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+#
+# architecture selection
+#
+# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
+#   processor architecture.
+# CONFIG_ARCH_family - for use in C code.  This identifies the
+#   particular chip family that the architecture is implemented
+#   in.
+# CONFIG_ARCH_architecture - for use in C code.  This identifies the
+#   specific architecture within the chip family.
+# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
+# CONFIG_ARCH_CHIP_name - For use in C code
+# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
+#   the board that supports the particular chip or SoC.
+# CONFIG_ARCH_BOARD_name - for use in C code
+# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
+# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
+# CONFIG_DRAM_SIZE - Describes the installed DRAM.
+# CONFIG_DRAM_START - The start address of DRAM (physical)
+# CONFIG_ARCH_IRQPRIO - The ST32F100CB supports interrupt prioritization
+# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
+#   stack. If defined, this symbol is the size of the interrupt
+#   stack in bytes.  If not defined, the user task stacks will be
+#   used during interrupt handling.
+# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
+# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader.
+# CONFIG_ARCH_LEDS -  Use LEDs to show state. Unique to board architecture.
+# CONFIG_ARCH_BUTTONS -  Enable support for buttons. Unique to board architecture.
+# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
+#   cause a 100 second delay during boot-up.  This 100 second delay
+#   serves no purpose other than it allows you to calibrate
+#   CONFIG_BOARD_LOOPSPERMSEC.  You simply use a stop watch to measure
+#   the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
+#   the delay actually is 100 seconds.
+# CONFIG_ARCH_DMA - Support DMA initialization
+#
+CONFIG_ARCH="arm"
+CONFIG_ARCH_ARM=y
+CONFIG_ARCH_CORTEXM3=y
+CONFIG_ARCH_CHIP="stm32"
+CONFIG_ARCH_CHIP_STM32F100C8=y
+#
+# Board Selection
+#
+CONFIG_ARCH_BOARD_PX4IO_V1=y
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="px4io-v1"
+CONFIG_BOARD_LOOPSPERMSEC=2000
+CONFIG_DRAM_SIZE=0x00002000
+CONFIG_DRAM_START=0x20000000
+CONFIG_ARCH_IRQPRIO=y
+CONFIG_ARCH_INTERRUPTSTACK=n
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARCH_BOOTLOADER=n
+CONFIG_ARCH_LEDS=n
+CONFIG_ARCH_BUTTONS=n
+CONFIG_ARCH_CALIBRATION=n
+CONFIG_ARCH_DMA=y
+CONFIG_ARCH_MATH_H=y
+
+CONFIG_ARMV7M_CMNVECTOR=y
+# CONFIG_ARMV7M_STACKCHECK is not set
+
+#
+# JTAG Enable settings (by default JTAG-DP and SW-DP are disabled):
+#
+#   CONFIG_STM32_DFU - Use the DFU bootloader, not JTAG
+#
+# JTAG Enable options:
+#
+#   CONFIG_STM32_JTAG_FULL_ENABLE - Enables full SWJ (JTAG-DP + SW-DP)
+#   CONFIG_STM32_JTAG_NOJNTRST_ENABLE - Enables full SWJ (JTAG-DP + SW-DP)
+#     but without JNTRST.
+#   CONFIG_STM32_JTAG_SW_ENABLE - Set JTAG-DP disabled and SW-DP enabled
+#
+CONFIG_STM32_DFU=n
+CONFIG_STM32_JTAG_FULL_ENABLE=y
+CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n
+CONFIG_STM32_JTAG_SW_ENABLE=n
+
+#
+# Individual subsystems can be enabled:
+#
+# AHB: 
+CONFIG_STM32_DMA1=y
+CONFIG_STM32_DMA2=n
+CONFIG_STM32_CRC=n
+# APB1:
+# Timers 2,3 and 4 are owned by the PWM driver
+CONFIG_STM32_TIM2=n
+CONFIG_STM32_TIM3=n
+CONFIG_STM32_TIM4=n
+CONFIG_STM32_TIM5=n
+CONFIG_STM32_TIM6=n
+CONFIG_STM32_TIM7=n
+CONFIG_STM32_WWDG=n
+CONFIG_STM32_SPI2=n
+CONFIG_STM32_USART2=y
+CONFIG_STM32_USART3=y
+CONFIG_STM32_I2C1=y
+CONFIG_STM32_I2C2=n
+CONFIG_STM32_BKP=n
+CONFIG_STM32_PWR=n
+CONFIG_STM32_DAC=n
+# APB2:
+# We use our own ADC driver, but leave this on for clocking purposes.
+CONFIG_STM32_ADC1=y
+CONFIG_STM32_ADC2=n
+# TIM1 is owned by the HRT
+CONFIG_STM32_TIM1=n
+CONFIG_STM32_SPI1=n
+CONFIG_STM32_TIM8=n
+CONFIG_STM32_USART1=y
+CONFIG_STM32_ADC3=n
+
+
+#
+# STM32F100 specific serial device driver settings
+#
+# CONFIG_USARTn_SERIAL_CONSOLE - selects the USARTn for the
+#   console and ttys0 (default is the USART1).
+# CONFIG_USARTn_RXBUFSIZE - Characters are buffered as received.
+#   This specific the size of the receive buffer
+# CONFIG_USARTn_TXBUFSIZE - Characters are buffered before
+#   being sent.  This specific the size of the transmit buffer
+# CONFIG_USARTn_BAUD - The configure BAUD of the UART.  Must be
+# CONFIG_USARTn_BITS - The number of bits.  Must be either 7 or 8.
+# CONFIG_USARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
+# CONFIG_USARTn_2STOP - Two stop bits
+#
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_STANDARD_SERIAL=y
+
+CONFIG_USART1_SERIAL_CONSOLE=y
+CONFIG_USART2_SERIAL_CONSOLE=n
+CONFIG_USART3_SERIAL_CONSOLE=n
+
+CONFIG_USART1_TXBUFSIZE=64
+CONFIG_USART2_TXBUFSIZE=64
+CONFIG_USART3_TXBUFSIZE=64
+
+CONFIG_USART1_RXBUFSIZE=64
+CONFIG_USART2_RXBUFSIZE=64
+CONFIG_USART3_RXBUFSIZE=64
+
+CONFIG_USART1_BAUD=115200
+CONFIG_USART2_BAUD=115200
+CONFIG_USART3_BAUD=115200
+
+CONFIG_USART1_BITS=8
+CONFIG_USART2_BITS=8
+CONFIG_USART3_BITS=8
+
+CONFIG_USART1_PARITY=0
+CONFIG_USART2_PARITY=0
+CONFIG_USART3_PARITY=0
+
+CONFIG_USART1_2STOP=0
+CONFIG_USART2_2STOP=0
+CONFIG_USART3_2STOP=0
+
+CONFIG_USART1_RXDMA=y
+SERIAL_HAVE_CONSOLE_DMA=y
+# Conflicts with I2C1 DMA
+CONFIG_USART2_RXDMA=n
+CONFIG_USART3_RXDMA=y
+
+#
+# PX4IO specific driver settings
+#
+# CONFIG_HRT_TIMER
+#   Enables the high-resolution timer.  The board definition must
+#   set HRT_TIMER and HRT_TIMER_CHANNEL to the timer and capture/
+#   compare channels to be used.
+# CONFIG_HRT_PPM
+#   Enables R/C PPM input using the HRT.  The board definition must
+#   set HRT_PPM_CHANNEL to the timer capture/compare channel to be
+#   used, and define GPIO_PPM_IN to configure the appropriate timer
+#   GPIO.
+# CONFIG_PWM_SERVO
+#   Enables the PWM servo driver.  The driver configuration must be
+#   supplied by the board support at initialisation time.
+#   Note that USART2 must be disabled on the PX4 board for this to
+#   be available.
+#
+#
+CONFIG_HRT_TIMER=y
+CONFIG_HRT_PPM=y
+
+#
+# General build options
+#
+# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
+#   BSPs from www.ridgerun.com using the tools/mkimage.sh script
+# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
+#   used with many different loaders using the GNU objcopy program
+#   Should not be selected if you are not using the GNU toolchain.
+# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format
+#   used with many different loaders using the GNU objcopy program
+#   Should not be selected if you are not using the GNU toolchain.
+# CONFIG_RAW_BINARY - make a raw binary format file used with many
+#   different loaders using the GNU objcopy program.  This option
+#   should not be selected if you are not using the GNU toolchain.
+# CONFIG_HAVE_LIBM - toolchain supports libm.a
+#
+CONFIG_RRLOAD_BINARY=n
+CONFIG_INTELHEX_BINARY=n
+CONFIG_MOTOROLA_SREC=n
+CONFIG_RAW_BINARY=y
+CONFIG_HAVE_LIBM=n
+
+#
+# General OS setup
+#
+# CONFIG_APPS_DIR - Identifies the relative path to the directory
+#   that builds the application to link with NuttX.  Default: ../apps
+# CONFIG_DEBUG - enables built-in debug options
+# CONFIG_DEBUG_VERBOSE - enables verbose debug output
+# CONFIG_DEBUG_SYMBOLS - build without optimization and with
+#   debug symbols (needed for use with a debugger).
+# CONFIG_HAVE_CXX - Enable support for C++
+# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
+#   for initialization of static C++ instances for this architecture
+#   and for the selected toolchain (via up_cxxinitialize()).
+# CONFIG_MM_REGIONS - If the architecture includes multiple
+#   regions of memory to allocate from, this specifies the
+#   number of memory regions that the memory manager must
+#   handle and enables the API mm_addregion(start, end);
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
+#   time console output
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
+#   inform NuttX that the processor hardware is providing
+#   system timer interrupts at some interrupt interval other
+#   than 10 msec.
+# CONFIG_RR_INTERVAL - The round robin timeslice will be set
+#   this number of milliseconds;  Round robin scheduling can
+#   be disabled by setting this value to zero.
+# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in 
+#   scheduler to monitor system performance
+# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
+#   task name to save in the TCB.  Useful if scheduler
+#   instrumentation is selected.  Set to zero to disable.
+# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
+#   Used to initialize the internal time logic.
+# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions.
+#   You would only need this if you are concerned about accurate
+#   time conversions in the past or in the distant future.
+# CONFIG_JULIAN_TIME - Enables Julian time conversions. You
+#   would only need this if you are concerned about accurate
+#   time conversion in the distand past.  You must also define
+#   CONFIG_GREGORIAN_TIME in order to use Julian time.
+# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
+#   provides /dev/console.  Enables stdout, stderr, stdin.
+# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
+#   driver (minimul support)
+# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
+#   errorcheck mutexes. Enables pthread_mutexattr_settype().
+# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
+#   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
+# CONFIG_SCHED_WORKQUEUE.  Create a dedicated "worker" thread to
+#  handle delayed processing from interrupt handlers.  This feature
+#  is required for some drivers but, if there are not complaints,
+#  can be safely disabled.  The worker thread also performs
+#  garbage collection -- completing any delayed memory deallocations
+#  from interrupt handlers.  If the worker thread is disabled,
+#  then that clean will be performed by the IDLE thread instead
+#  (which runs at the lowest of priority and may not be appropriate
+#  if memory reclamation is of high priority).  If CONFIG_SCHED_WORKQUEUE
+#  is enabled, then the following options can also be used:
+# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker
+#  thread.  Default: 50
+# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for
+#  work in units of microseconds.  Default: 50*1000 (50 MS).
+# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker
+#  thread.  Default: CONFIG_IDLETHREAD_STACKSIZE.
+# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up
+#  the worker thread.  Default: 4
+# CONFIG_SCHED_WAITPID - Enable the waitpid() API
+# CONFIG_SCHED_ATEXIT - Enabled the atexit() API
+#
+CONFIG_USER_ENTRYPOINT="user_start"
+#CONFIG_APPS_DIR=
+CONFIG_DEBUG=n
+CONFIG_DEBUG_VERBOSE=n
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEBUG_FS=n
+CONFIG_DEBUG_GRAPHICS=n
+CONFIG_DEBUG_LCD=n
+CONFIG_DEBUG_USB=n
+CONFIG_DEBUG_NET=n
+CONFIG_DEBUG_RTC=n
+CONFIG_DEBUG_ANALOG=n
+CONFIG_DEBUG_PWM=n
+CONFIG_DEBUG_CAN=n
+CONFIG_DEBUG_I2C=n
+CONFIG_DEBUG_INPUT=n
+
+CONFIG_MSEC_PER_TICK=1
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_MM_REGIONS=1
+CONFIG_MM_SMALL=y
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_RR_INTERVAL=0
+CONFIG_SCHED_INSTRUMENTATION=n
+CONFIG_TASK_NAME_SIZE=8
+CONFIG_START_YEAR=1970
+CONFIG_START_MONTH=1
+CONFIG_START_DAY=1
+CONFIG_GREGORIAN_TIME=n
+CONFIG_JULIAN_TIME=n
+# this eats ~1KiB of RAM ... work out why
+CONFIG_DEV_CONSOLE=y
+CONFIG_DEV_LOWCONSOLE=n
+CONFIG_MUTEX_TYPES=n
+CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SCHED_WORKQUEUE=n
+CONFIG_SCHED_WORKPRIORITY=50
+CONFIG_SCHED_WORKPERIOD=50000
+CONFIG_SCHED_WORKSTACKSIZE=1024
+CONFIG_SIG_SIGWORK=4
+CONFIG_SCHED_WAITPID=n
+CONFIG_SCHED_ATEXIT=n
+
+#
+# The following can be used to disable categories of
+# APIs supported by the OS.  If the compiler supports
+# weak functions, then it should not be necessary to
+# disable functions unless you want to restrict usage
+# of those APIs.
+#
+# There are certain dependency relationships in these
+# features.
+#
+# o mq_notify logic depends on signals to awaken tasks
+#   waiting for queues to become full or empty.
+# o pthread_condtimedwait() depends on signals to wake
+#   up waiting tasks.
+#
+CONFIG_DISABLE_CLOCK=n
+CONFIG_DISABLE_POSIX_TIMERS=y
+CONFIG_DISABLE_PTHREAD=y
+CONFIG_DISABLE_SIGNALS=y
+CONFIG_DISABLE_MQUEUE=y
+CONFIG_DISABLE_MOUNTPOINT=y
+CONFIG_DISABLE_ENVIRON=y
+CONFIG_DISABLE_POLL=y
+
+#
+# Misc libc settings
+#
+# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
+#   little smaller if we do not support fieldwidthes
+#
+CONFIG_NOPRINTF_FIELDWIDTH=n
+
+#
+# Allow for architecture optimized implementations
+#
+# The architecture can provide optimized versions of the
+# following to improve system performance
+#
+CONFIG_ARCH_MEMCPY=n
+CONFIG_ARCH_MEMCMP=n
+CONFIG_ARCH_MEMMOVE=n
+CONFIG_ARCH_MEMSET=n
+CONFIG_ARCH_STRCMP=n
+CONFIG_ARCH_STRCPY=n
+CONFIG_ARCH_STRNCPY=n
+CONFIG_ARCH_STRLEN=n
+CONFIG_ARCH_STRNLEN=n
+CONFIG_ARCH_BZERO=n
+
+#
+# Sizes of configurable things (0 disables)
+#
+# CONFIG_MAX_TASKS - The maximum number of simultaneously
+#   active tasks.  This value must be a power of two.
+# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
+#   of parameters that a task may receive (i.e., maxmum value
+#   of 'argc')
+# CONFIG_NPTHREAD_KEYS - The number of items of thread-
+#   specific data that can be retained
+# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
+#   descriptors (one for each open)
+# CONFIG_NFILE_STREAMS - The maximum number of streams that
+#   can be fopen'ed
+# CONFIG_NAME_MAX - The maximum size of a file name.
+# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
+#   on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_STDIO_LINEBUFFER - If standard C buffered I/O is enabled
+#   (CONFIG_STDIO_BUFFER_SIZE > 0), then this option may be added
+#   to force automatic, line-oriented flushing the output buffer
+#   for putc(), fputc(), putchar(), puts(), fputs(), printf(),
+#   fprintf(), and vfprintf().  When a newline is encountered in
+#   the output string, the output buffer will be flushed.  This
+#   (slightly) increases the NuttX footprint but supports the kind
+#   of behavior that people expect for printf().
+# CONFIG_NUNGET_CHARS - Number of characters that can be
+#   buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
+#   structures.  The system manages a pool of preallocated
+#   message structures to minimize dynamic allocations
+# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
+#   a fixed payload size given by this settin (does not include
+#   other message structure overhead.
+# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
+#   can be passed to a watchdog handler
+# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
+#   structures.  The system manages a pool of preallocated
+#   watchdog structures to minimize dynamic allocations
+# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
+#   timer structures.  The system manages a pool of preallocated
+#   timer structures to minimize dynamic allocations.  Set to
+#   zero for all dynamic allocations.
+#
+CONFIG_MAX_TASKS=4
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=2
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=0
+CONFIG_NAME_MAX=12
+CONFIG_STDIO_BUFFER_SIZE=32
+CONFIG_STDIO_LINEBUFFER=n
+CONFIG_NUNGET_CHARS=2
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=4
+CONFIG_PREALLOC_TIMERS=0
+
+
+#
+# Settings for apps/nshlib
+#
+# CONFIG_NSH_BUILTIN_APPS - Support external registered,
+#   "named" applications that can be executed from the NSH
+#   command line (see apps/README.txt for more information).
+# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer
+# CONFIG_NSH_STRERROR - Use strerror(errno)
+# CONFIG_NSH_LINELEN - Maximum length of one command line
+# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
+# CONFIG_NSH_DISABLESCRIPT - Disable scripting support
+# CONFIG_NSH_DISABLEBG - Disable background commands
+# CONFIG_NSH_ROMFSETC - Use startup script in /etc
+# CONFIG_NSH_CONSOLE - Use serial console front end
+# CONFIG_NSH_TELNET - Use telnetd console front end
+# CONFIG_NSH_ARCHINIT - Platform provides architecture
+#   specific initialization (nsh_archinitialize()).
+#
+
+# Disable NSH completely
+CONFIG_NSH_CONSOLE=n
+
+#
+# Stack and heap information
+#
+# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP
+#   operation from FLASH but must copy initialized .data sections to RAM.
+#   (should also be =n for the STM3210E-EVAL which always runs from flash)
+# CONFIG_BOOT_COPYTORAM -  Some configurations boot in FLASH
+#   but copy themselves entirely into RAM for better performance.
+# CONFIG_CUSTOM_STACK - The up_ implementation will handle
+#   all stack operations outside of the nuttx model.
+# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
+# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
+#  This is the thread that (1) performs the inital boot of the system up
+#  to the point where user_start() is spawned, and (2) there after is the
+#  IDLE thread that executes only when there is no other thread ready to
+#  run.
+# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
+#  for the main user thread that begins at the user_start() entry point.
+# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
+# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
+# CONFIG_HEAP_BASE - The beginning of the heap
+# CONFIG_HEAP_SIZE - The size of the heap
+#
+CONFIG_BOOT_RUNFROMFLASH=n
+CONFIG_BOOT_COPYTORAM=n
+CONFIG_CUSTOM_STACK=n
+CONFIG_STACK_POINTER=
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=1200
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_PTHREAD_STACK_DEFAULT=1024
+CONFIG_HEAP_BASE=
+CONFIG_HEAP_SIZE=
+
+#
+# NSH Library
+#
+# CONFIG_NSH_LIBRARY is not set
+# CONFIG_NSH_BUILTIN_APPS is not set
diff --git a/nuttx-configs/px4io-v1/nsh/setenv.sh b/nuttx-configs/px4io-v1/nsh/setenv.sh
new file mode 100755
index 000000000..ff9a4bf8a
--- /dev/null
+++ b/nuttx-configs/px4io-v1/nsh/setenv.sh
@@ -0,0 +1,47 @@
+#!/bin/bash
+# configs/stm3210e-eval/dfu/setenv.sh
+#
+#   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$(basename $0)" = "setenv.sh" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
+
+WD=`pwd`
+export RIDE_BIN="/cygdrive/c/Program Files/Raisonance/Ride/arm-gcc/bin"
+export BUILDROOT_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+export PATH="${BUILDROOT_BIN}:${RIDE_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"
diff --git a/nuttx-configs/px4io-v1/scripts/ld.script b/nuttx-configs/px4io-v1/scripts/ld.script
new file mode 100755
index 000000000..69c2f9cb2
--- /dev/null
+++ b/nuttx-configs/px4io-v1/scripts/ld.script
@@ -0,0 +1,129 @@
+/****************************************************************************
+ * configs/stm3210e-eval/nsh/ld.script
+ *
+ *   Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The STM32F100C8 has 64Kb of FLASH beginning at address 0x0800:0000 and
+ * 8Kb of SRAM beginning at address 0x2000:0000.  When booting from FLASH,
+ * FLASH memory is aliased to address 0x0000:0000 where the code expects to
+ * begin execution by jumping to the entry point in the 0x0800:0000 address
+ * range.
+ */
+
+MEMORY
+{
+    flash (rx) : ORIGIN = 0x08001000, LENGTH = 60K
+    sram (rwx) : ORIGIN = 0x20000000, LENGTH = 8K
+}
+
+OUTPUT_ARCH(arm)
+ENTRY(__start)		/* treat __start as the anchor for dead code stripping */
+EXTERN(_vectors)	/* force the vectors to be included in the output */
+
+/* 
+ * Ensure that abort() is present in the final object.  The exception handling
+ * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
+ */
+EXTERN(abort)
+
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		*(.text .text.*)        
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)        
+		*(.gnu.linkonce.t.*)
+		*(.glue_7)
+		*(.glue_7t)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+	} > flash
+
+	/*
+	 * Init functions (static constructors and the like)
+	 */
+        .init_section : {
+                _sinit = ABSOLUTE(.);
+                KEEP(*(.init_array .init_array.*))
+                _einit = ABSOLUTE(.);
+        } > flash
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > flash
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > flash
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	/* The STM32F100CB has 8Kb of SRAM beginning at the following address */
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/nuttx-configs/px4io-v1/src/Makefile b/nuttx-configs/px4io-v1/src/Makefile
new file mode 100644
index 000000000..bb9539d16
--- /dev/null
+++ b/nuttx-configs/px4io-v1/src/Makefile
@@ -0,0 +1,84 @@
+############################################################################
+# configs/stm3210e-eval/src/Makefile
+#
+#   Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+-include $(TOPDIR)/Make.defs
+
+CFLAGS		+= -I$(TOPDIR)/sched
+
+ASRCS		= 
+AOBJS		= $(ASRCS:.S=$(OBJEXT))
+
+CSRCS		= empty.c
+
+COBJS		= $(CSRCS:.c=$(OBJEXT))
+
+SRCS		= $(ASRCS) $(CSRCS)
+OBJS		= $(AOBJS) $(COBJS)
+
+ARCH_SRCDIR	= $(TOPDIR)/arch/$(CONFIG_ARCH)/src
+ifeq ($(WINTOOL),y)
+  CFLAGS	+= -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
+  		   -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
+  		   -I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}"
+else
+  CFLAGS	+= -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m
+endif
+
+all: libboard$(LIBEXT)
+
+$(AOBJS): %$(OBJEXT): %.S
+	$(call ASSEMBLE, $<, $@)
+
+$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
+	$(call COMPILE, $<, $@)
+
+libboard$(LIBEXT): $(OBJS)
+	$(call ARCHIVE, $@, $(OBJS))
+
+.depend: Makefile $(SRCS)
+	@$(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
+	@touch $@
+
+depend: .depend
+
+clean:
+	$(call DELFILE, libboard$(LIBEXT))
+	$(call CLEAN)
+
+distclean: clean
+	$(call DELFILE, Make.dep)
+	$(call DELFILE, .depend)
+
+-include Make.dep
diff --git a/nuttx-configs/px4io-v1/src/empty.c b/nuttx-configs/px4io-v1/src/empty.c
new file mode 100644
index 000000000..ace900866
--- /dev/null
+++ b/nuttx-configs/px4io-v1/src/empty.c
@@ -0,0 +1,4 @@
+/*
+ * There are no source files here, but libboard.a can't be empty, so 
+ * we have this empty source file to keep it company.
+ */