Merge branch 'nuttx_bringup' of https://github.com/PX4/Firmware into nuttx_bringup

3 files changed, 2138 insertions, 1092 deletions

diff --git a/nuttx-configs/px4fmu-v1/nsh/defconfig b/nuttx-configs/px4fmu-v1/nsh/defconfig
index ec4363292..caf1942a0 100644
--- a/nuttx-configs/px4fmu-v1/nsh/defconfig
+++ b/nuttx-configs/px4fmu-v1/nsh/defconfig
@@ -7,6 +7,7 @@
 # Build Setup
 #
 # CONFIG_EXPERIMENTAL is not set
+# CONFIG_DEFAULT_SMALL is not set
 CONFIG_HOST_LINUX=y
 # CONFIG_HOST_OSX is not set
 # CONFIG_HOST_WINDOWS is not set
@@ -16,6 +17,7 @@ CONFIG_HOST_LINUX=y
 # Build Configuration
 #
 CONFIG_APPS_DIR="../apps"
+CONFIG_BUILD_FLAT=y
 # CONFIG_BUILD_2PASS is not set
 
 #
@@ -25,6 +27,7 @@ CONFIG_APPS_DIR="../apps"
 # CONFIG_INTELHEX_BINARY is not set
 # CONFIG_MOTOROLA_SREC is not set
 CONFIG_RAW_BINARY=y
+# CONFIG_UBOOT_UIMAGE is not set
 
 #
 # Customize Header Files
@@ -40,8 +43,6 @@ CONFIG_ARCH_MATH_H=y
 #
 # CONFIG_DEBUG is not set
 CONFIG_ARCH_HAVE_STACKCHECK=y
-CONFIG_ARMV7M_STACKCHECK=y
-CONFIG_SERIAL_TERMIOS=y
 CONFIG_ARCH_HAVE_HEAPCHECK=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_ARCH_HAVE_CUSTOMOPT=y
@@ -52,7 +53,6 @@ CONFIG_DEBUG_NOOPT=y
 #
 # System Type
 #
-# CONFIG_ARCH_8051 is not set
 CONFIG_ARCH_ARM=y
 # CONFIG_ARCH_AVR is not set
 # CONFIG_ARCH_HC is not set
@@ -68,23 +68,35 @@ CONFIG_ARCH="arm"
 #
 # ARM Options
 #
+# CONFIG_ARCH_CHIP_A1X is not set
 # CONFIG_ARCH_CHIP_C5471 is not set
 # CONFIG_ARCH_CHIP_CALYPSO is not set
 # CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_EFM32 is not set
 # CONFIG_ARCH_CHIP_IMX is not set
 # CONFIG_ARCH_CHIP_KINETIS is not set
 # CONFIG_ARCH_CHIP_KL is not set
 # CONFIG_ARCH_CHIP_LM is not set
+# CONFIG_ARCH_CHIP_TIVA is not set
 # CONFIG_ARCH_CHIP_LPC17XX is not set
 # CONFIG_ARCH_CHIP_LPC214X is not set
 # CONFIG_ARCH_CHIP_LPC2378 is not set
 # CONFIG_ARCH_CHIP_LPC31XX is not set
 # CONFIG_ARCH_CHIP_LPC43XX is not set
 # CONFIG_ARCH_CHIP_NUC1XX is not set
+# CONFIG_ARCH_CHIP_SAMA5 is not set
+# CONFIG_ARCH_CHIP_SAMD is not set
 # CONFIG_ARCH_CHIP_SAM34 is not set
 CONFIG_ARCH_CHIP_STM32=y
 # CONFIG_ARCH_CHIP_STR71X is not set
+# CONFIG_ARCH_ARM7TDMI is not set
+# CONFIG_ARCH_ARM926EJS is not set
+# CONFIG_ARCH_ARM920T is not set
+# CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM3 is not set
 CONFIG_ARCH_CORTEXM4=y
+# CONFIG_ARCH_CORTEXA5 is not set
+# CONFIG_ARCH_CORTEXA8 is not set
 CONFIG_ARCH_FAMILY="armv7-m"
 CONFIG_ARCH_CHIP="stm32"
 CONFIG_ARMV7M_USEBASEPRI=y
@@ -92,7 +104,6 @@ CONFIG_ARCH_HAVE_CMNVECTOR=y
 CONFIG_ARMV7M_CMNVECTOR=y
 CONFIG_ARCH_HAVE_FPU=y
 CONFIG_ARCH_FPU=y
-CONFIG_ARCH_HAVE_MPU=y
 # CONFIG_ARMV7M_MPU is not set
 
 #
@@ -102,10 +113,8 @@ CONFIG_ARCH_HAVE_MPU=y
 # CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
 # CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
 CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y
+CONFIG_ARMV7M_STACKCHECK=y
 # CONFIG_ARMV7M_ITMSYSLOG is not set
-# CONFIG_SDIO_DMA is not set
-# CONFIG_SDIO_DMAPRIO is not set
-# CONFIG_SDIO_WIDTH_D1_ONLY is not set
 
 #
 # STM32 Configuration Options
@@ -128,6 +137,7 @@ CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y
 # CONFIG_ARCH_CHIP_STM32L152V6 is not set
 # CONFIG_ARCH_CHIP_STM32L152V8 is not set
 # CONFIG_ARCH_CHIP_STM32L152VB is not set
+# CONFIG_ARCH_CHIP_STM32L162ZD is not set
 # CONFIG_ARCH_CHIP_STM32F100C8 is not set
 # CONFIG_ARCH_CHIP_STM32F100CB is not set
 # CONFIG_ARCH_CHIP_STM32F100R8 is not set
@@ -140,15 +150,27 @@ CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y
 # CONFIG_ARCH_CHIP_STM32F100VC is not set
 # CONFIG_ARCH_CHIP_STM32F100VD is not set
 # CONFIG_ARCH_CHIP_STM32F100VE is not set
+# CONFIG_ARCH_CHIP_STM32F102CB is not set
+# CONFIG_ARCH_CHIP_STM32F103T8 is not set
+# CONFIG_ARCH_CHIP_STM32F103TB is not set
 # CONFIG_ARCH_CHIP_STM32F103C4 is not set
 # CONFIG_ARCH_CHIP_STM32F103C8 is not set
-# CONFIG_ARCH_CHIP_STM32F103RET6 is not set
-# CONFIG_ARCH_CHIP_STM32F103VCT6 is not set
-# CONFIG_ARCH_CHIP_STM32F103VET6 is not set
-# CONFIG_ARCH_CHIP_STM32F103ZET6 is not set
-# CONFIG_ARCH_CHIP_STM32F105VBT7 is not set
+# CONFIG_ARCH_CHIP_STM32F103CB is not set
+# CONFIG_ARCH_CHIP_STM32F103R8 is not set
+# CONFIG_ARCH_CHIP_STM32F103RB is not set
+# CONFIG_ARCH_CHIP_STM32F103RC is not set
+# CONFIG_ARCH_CHIP_STM32F103RD is not set
+# CONFIG_ARCH_CHIP_STM32F103RE is not set
+# CONFIG_ARCH_CHIP_STM32F103RG is not set
+# CONFIG_ARCH_CHIP_STM32F103V8 is not set
+# CONFIG_ARCH_CHIP_STM32F103VB is not set
+# CONFIG_ARCH_CHIP_STM32F103VC is not set
+# CONFIG_ARCH_CHIP_STM32F103VE is not set
+# CONFIG_ARCH_CHIP_STM32F103ZE is not set
+# CONFIG_ARCH_CHIP_STM32F105VB is not set
 # CONFIG_ARCH_CHIP_STM32F107VC is not set
 # CONFIG_ARCH_CHIP_STM32F207IG is not set
+# CONFIG_ARCH_CHIP_STM32F207ZE is not set
 # CONFIG_ARCH_CHIP_STM32F302CB is not set
 # CONFIG_ARCH_CHIP_STM32F302CC is not set
 # CONFIG_ARCH_CHIP_STM32F302RB is not set
@@ -161,6 +183,8 @@ CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y
 # CONFIG_ARCH_CHIP_STM32F303RC is not set
 # CONFIG_ARCH_CHIP_STM32F303VB is not set
 # CONFIG_ARCH_CHIP_STM32F303VC is not set
+# CONFIG_ARCH_CHIP_STM32F401RE is not set
+# CONFIG_ARCH_CHIP_STM32F411RE is not set
 CONFIG_ARCH_CHIP_STM32F405RG=y
 # CONFIG_ARCH_CHIP_STM32F405VG is not set
 # CONFIG_ARCH_CHIP_STM32F405ZG is not set
@@ -173,18 +197,31 @@ CONFIG_ARCH_CHIP_STM32F405RG=y
 # CONFIG_ARCH_CHIP_STM32F427V is not set
 # CONFIG_ARCH_CHIP_STM32F427Z is not set
 # CONFIG_ARCH_CHIP_STM32F427I is not set
+# CONFIG_ARCH_CHIP_STM32F429V is not set
+# CONFIG_ARCH_CHIP_STM32F429Z is not set
+# CONFIG_ARCH_CHIP_STM32F429I is not set
+# CONFIG_ARCH_CHIP_STM32F429B is not set
+# CONFIG_ARCH_CHIP_STM32F429N is not set
 # CONFIG_STM32_STM32L15XX is not set
 # CONFIG_STM32_ENERGYLITE is not set
 # CONFIG_STM32_STM32F10XX is not set
 # CONFIG_STM32_VALUELINE is not set
 # CONFIG_STM32_CONNECTIVITYLINE is not set
 # CONFIG_STM32_PERFORMANCELINE is not set
+# CONFIG_STM32_USBACCESSLINE is not set
 # CONFIG_STM32_HIGHDENSITY is not set
 # CONFIG_STM32_MEDIUMDENSITY is not set
 # CONFIG_STM32_LOWDENSITY is not set
 # CONFIG_STM32_STM32F20XX is not set
+# CONFIG_STM32_STM32F207 is not set
 # CONFIG_STM32_STM32F30XX is not set
 CONFIG_STM32_STM32F40XX=y
+# CONFIG_STM32_STM32F401 is not set
+# CONFIG_STM32_STM32F411 is not set
+CONFIG_STM32_STM32F405=y
+# CONFIG_STM32_STM32F407 is not set
+# CONFIG_STM32_STM32F427 is not set
+# CONFIG_STM32_STM32F429 is not set
 # CONFIG_STM32_DFU is not set
 
 #
@@ -220,11 +257,11 @@ CONFIG_STM32_HAVE_ADC3=y
 CONFIG_STM32_HAVE_CAN1=y
 CONFIG_STM32_HAVE_CAN2=y
 CONFIG_STM32_HAVE_RNG=y
-CONFIG_STM32_HAVE_ETHMAC=y
+# CONFIG_STM32_HAVE_ETHMAC is not set
 CONFIG_STM32_HAVE_SPI2=y
 CONFIG_STM32_HAVE_SPI3=y
-CONFIG_STM32_HAVE_SPI4=y
-CONFIG_STM32_HAVE_SPI5=y
+# CONFIG_STM32_HAVE_SPI4 is not set
+# CONFIG_STM32_HAVE_SPI5 is not set
 CONFIG_STM32_ADC1=y
 # CONFIG_STM32_ADC2 is not set
 # CONFIG_STM32_ADC3 is not set
@@ -239,7 +276,6 @@ CONFIG_STM32_DMA2=y
 # CONFIG_STM32_DAC1 is not set
 # CONFIG_STM32_DAC2 is not set
 # CONFIG_STM32_DCMI is not set
-# CONFIG_STM32_ETHMAC is not set
 # CONFIG_STM32_FSMC is not set
 # CONFIG_STM32_HASH is not set
 CONFIG_STM32_I2C1=y
@@ -312,14 +348,10 @@ CONFIG_STM32_USART=y
 # CONFIG_USART1_RXDMA is not set
 # CONFIG_USART2_RS485 is not set
 CONFIG_USART2_RXDMA=y
-# CONFIG_USART3_RXDMA is not set
-# CONFIG_UART4_RXDMA is not set
 # CONFIG_UART5_RS485 is not set
 CONFIG_UART5_RXDMA=y
 # CONFIG_USART6_RS485 is not set
 CONFIG_USART6_RXDMA=y
-# CONFIG_USART7_RXDMA is not set
-# CONFIG_USART8_RXDMA is not set
 CONFIG_SERIAL_DISABLE_REORDERING=y
 CONFIG_STM32_FLOWCONTROL_BROKEN=y
 CONFIG_STM32_USART_SINGLEWIRE=y
@@ -333,6 +365,7 @@ CONFIG_STM32_USART_SINGLEWIRE=y
 #
 # I2C Configuration
 #
+# CONFIG_STM32_I2C_ALT is not set
 # CONFIG_STM32_I2C_DYNTIMEO is not set
 CONFIG_STM32_I2CTIMEOSEC=0
 CONFIG_STM32_I2CTIMEOMS=10
@@ -340,15 +373,19 @@ CONFIG_STM32_I2CTIMEOTICKS=10
 # CONFIG_STM32_I2C_DUTY16_9 is not set
 
 #
-# USB Host Configuration
+# USB FS Host Configuration
 #
 
 #
-# USB Device Configuration
+# USB HS Host Configuration
 #
 
 #
-# External Memory Configuration
+# USB Host Debug Configuration
+#
+
+#
+# USB Device Configuration
 #
 
 #
@@ -357,12 +394,21 @@ CONFIG_STM32_I2CTIMEOTICKS=10
 # CONFIG_ARCH_NOINTC is not set
 # CONFIG_ARCH_VECNOTIRQ is not set
 CONFIG_ARCH_DMA=y
-# CONFIG_ARCH_IRQPRIO is not set
-# CONFIG_CUSTOM_STACK is not set
-# CONFIG_ADDRENV is not set
+CONFIG_ARCH_HAVE_IRQPRIO=y
+# CONFIG_ARCH_L2CACHE is not set
+# CONFIG_ARCH_HAVE_COHERENT_DCACHE is not set
+# CONFIG_ARCH_HAVE_ADDRENV is not set
+# CONFIG_ARCH_NEED_ADDRENV_MAPPING is not set
 CONFIG_ARCH_HAVE_VFORK=y
+# CONFIG_ARCH_HAVE_MMU is not set
+CONFIG_ARCH_HAVE_MPU=y
+# CONFIG_ARCH_NAND_HWECC is not set
+# CONFIG_ARCH_HAVE_EXTCLK is not set
+# CONFIG_ARCH_USE_MPU is not set
+# CONFIG_ARCH_IRQPRIO is not set
 CONFIG_ARCH_STACKDUMP=y
 # CONFIG_ENDIAN_BIG is not set
+# CONFIG_ARCH_IDLE_CUSTOM is not set
 # CONFIG_ARCH_HAVE_RAMFUNCS is not set
 CONFIG_ARCH_HAVE_RAMVECTORS=y
 # CONFIG_ARCH_RAMVECTORS is not set
@@ -372,10 +418,14 @@ CONFIG_ARCH_HAVE_RAMVECTORS=y
 #
 CONFIG_BOARD_LOOPSPERMSEC=16717
 # CONFIG_ARCH_CALIBRATION is not set
-CONFIG_RAM_START=0x20000000
-CONFIG_RAM_SIZE=196608
+
+#
+# Interrupt options
+#
 CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
 CONFIG_ARCH_INTERRUPTSTACK=4096
+CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y
+# CONFIG_ARCH_HIPRI_INTERRUPT is not set
 
 #
 # Boot options
@@ -387,6 +437,13 @@ CONFIG_BOOT_RUNFROMFLASH=y
 # CONFIG_BOOT_COPYTORAM is not set
 
 #
+# Boot Memory Configuration
+#
+CONFIG_RAM_START=0x20000000
+CONFIG_RAM_SIZE=196608
+# CONFIG_ARCH_HAVE_SDRAM is not set
+
+#
 # Board Selection
 #
 CONFIG_ARCH_BOARD_PX4FMU_V1=y
@@ -394,6 +451,13 @@ CONFIG_ARCH_BOARD_PX4FMU_V1=y
 CONFIG_ARCH_BOARD="px4fmu-v1"
 
 #
+# Custom Board Configuration
+#
+CONFIG_ARCH_BOARD_CUSTOM_DIR=""
+# CONFIG_BOARD_CUSTOM_LEDS is not set
+# CONFIG_BOARD_CUSTOM_BUTTONS is not set
+
+#
 # Common Board Options
 #
 CONFIG_NSH_MMCSDMINOR=0
@@ -407,37 +471,75 @@ CONFIG_NSH_MMCSDSPIPORTNO=3
 #
 # RTOS Features
 #
-# CONFIG_BOARD_INITIALIZE is not set
-CONFIG_MSEC_PER_TICK=1
-CONFIG_RR_INTERVAL=0
-CONFIG_SCHED_INSTRUMENTATION=y
-CONFIG_TASK_NAME_SIZE=24
-# CONFIG_SCHED_HAVE_PARENT is not set
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_POSIX_TIMERS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_DISABLE_SIGNALS is not set
+# CONFIG_DISABLE_MQUEUE is not set
+# CONFIG_DISABLE_ENVIRON is not set
+
+#
+# Clocks and Timers
+#
+CONFIG_USEC_PER_TICK=1000
+# CONFIG_SYSTEM_TIME64 is not set
+# CONFIG_CLOCK_MONOTONIC is not set
 # CONFIG_JULIAN_TIME is not set
 CONFIG_START_YEAR=1970
 CONFIG_START_MONTH=1
 CONFIG_START_DAY=1
-CONFIG_DEV_CONSOLE=y
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=50
+CONFIG_WDOG_INTRESERVE=4
+CONFIG_PREALLOC_TIMERS=50
+
+#
+# Tasks and Scheduling
+#
+# CONFIG_INIT_NONE is not set
+CONFIG_INIT_ENTRYPOINT=y
+# CONFIG_INIT_FILEPATH is not set
+CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_RR_INTERVAL=0
+CONFIG_TASK_NAME_SIZE=24
+CONFIG_MAX_TASKS=32
+# CONFIG_SCHED_HAVE_PARENT is not set
+CONFIG_SCHED_WAITPID=y
+
+#
+# Pthread Options
+#
 # CONFIG_MUTEX_TYPES is not set
-CONFIG_PRIORITY_INHERITANCE=y
-CONFIG_SEM_PREALLOCHOLDERS=0
-CONFIG_SEM_NNESTPRIO=8
+CONFIG_NPTHREAD_KEYS=4
+
+#
+# Performance Monitoring
+#
+# CONFIG_SCHED_CPULOAD is not set
+CONFIG_SCHED_INSTRUMENTATION=y
+
+#
+# Files and I/O
+#
+CONFIG_DEV_CONSOLE=y
 # CONFIG_FDCLONE_DISABLE is not set
 CONFIG_FDCLONE_STDIO=y
 CONFIG_SDCLONE_DISABLE=y
-CONFIG_SCHED_WAITPID=y
+CONFIG_NFILE_DESCRIPTORS=42
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+CONFIG_PRIORITY_INHERITANCE=y
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=8
+
+#
+# RTOS hooks
+#
+# CONFIG_BOARD_INITIALIZE is not set
 # CONFIG_SCHED_STARTHOOK is not set
 CONFIG_SCHED_ATEXIT=y
 CONFIG_SCHED_ATEXIT_MAX=1
 # CONFIG_SCHED_ONEXIT is not set
-CONFIG_USER_ENTRYPOINT="nsh_main"
-CONFIG_DISABLE_OS_API=y
-# CONFIG_DISABLE_CLOCK is not set
-# CONFIG_DISABLE_POSIX_TIMERS is not set
-# CONFIG_DISABLE_PTHREAD is not set
-# CONFIG_DISABLE_SIGNALS is not set
-# CONFIG_DISABLE_MQUEUE is not set
-# CONFIG_DISABLE_ENVIRON is not set
 
 #
 # Signal Numbers
@@ -449,19 +551,25 @@ CONFIG_SIG_SIGCONDTIMEDOUT=16
 CONFIG_SIG_SIGWORK=4
 
 #
-# Sizes of configurable things (0 disables)
+# POSIX Message Queue Options
 #
-CONFIG_MAX_TASKS=32
-CONFIG_MAX_TASK_ARGS=10
-CONFIG_NPTHREAD_KEYS=4
-CONFIG_NFILE_DESCRIPTORS=42
-CONFIG_NFILE_STREAMS=8
-CONFIG_NAME_MAX=32
 CONFIG_PREALLOC_MQ_MSGS=4
 CONFIG_MQ_MAXMSGSIZE=32
-CONFIG_MAX_WDOGPARMS=2
-CONFIG_PREALLOC_WDOGS=50
-CONFIG_PREALLOC_TIMERS=50
+
+#
+# Work Queue Support
+#
+CONFIG_SCHED_WORKQUEUE=y
+CONFIG_SCHED_HPWORK=y
+CONFIG_SCHED_HPWORKPRIORITY=192
+CONFIG_SCHED_HPWORKPERIOD=5000
+CONFIG_SCHED_HPWORKSTACKSIZE=2048
+CONFIG_SCHED_LPWORK=y
+CONFIG_SCHED_LPNTHREADS=1
+CONFIG_SCHED_LPWORKPRIORITY=50
+CONFIG_SCHED_LPWORKPRIOMAX=176
+CONFIG_SCHED_LPWORKPERIOD=50000
+CONFIG_SCHED_LPWORKSTACKSIZE=2048
 
 #
 # Stack and heap information
@@ -470,6 +578,7 @@ CONFIG_IDLETHREAD_STACKSIZE=3500
 CONFIG_USERMAIN_STACKSIZE=3000
 CONFIG_PTHREAD_STACK_MIN=512
 CONFIG_PTHREAD_STACK_DEFAULT=2048
+# CONFIG_LIB_SYSCALL is not set
 
 #
 # Device Drivers
@@ -478,25 +587,37 @@ CONFIG_PTHREAD_STACK_DEFAULT=2048
 CONFIG_DEV_NULL=y
 # CONFIG_DEV_ZERO is not set
 # CONFIG_LOOP is not set
+
+#
+# Buffering
+#
+# CONFIG_DRVR_WRITEBUFFER is not set
+# CONFIG_DRVR_READAHEAD is not set
 # CONFIG_RAMDISK is not set
 # CONFIG_CAN is not set
+# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
 # CONFIG_PWM is not set
+CONFIG_ARCH_HAVE_I2CRESET=y
 CONFIG_I2C=y
 # CONFIG_I2C_SLAVE is not set
 CONFIG_I2C_TRANSFER=y
 # CONFIG_I2C_WRITEREAD is not set
 # CONFIG_I2C_POLLED is not set
 # CONFIG_I2C_TRACE is not set
-CONFIG_ARCH_HAVE_I2CRESET=y
 CONFIG_I2C_RESET=y
 CONFIG_SPI=y
 # CONFIG_SPI_OWNBUS is not set
 CONFIG_SPI_EXCHANGE=y
 # CONFIG_SPI_CMDDATA is not set
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_I2S is not set
 # CONFIG_RTC is not set
 CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_DEVPATH="/dev/watchdog0"
+# CONFIG_TIMER is not set
 # CONFIG_ANALOG is not set
 # CONFIG_AUDIO_DEVICES is not set
+# CONFIG_VIDEO_DEVICES is not set
 # CONFIG_BCH is not set
 # CONFIG_INPUT is not set
 # CONFIG_LCD is not set
@@ -508,51 +629,91 @@ CONFIG_MMCSD_NSLOTS=1
 # CONFIG_MMCSD_HAVECARDDETECT is not set
 CONFIG_MMCSD_SPI=y
 CONFIG_MMCSD_SPICLOCK=24000000
-# CONFIG_MMCSD_SDIO is not set
+CONFIG_MMCSD_SPIMODE=0
+# CONFIG_ARCH_HAVE_SDIO is not set
 CONFIG_MTD=y
+
+#
+# MTD Configuration
+#
+CONFIG_MTD_PARTITION=y
+# CONFIG_MTD_SECT512 is not set
+CONFIG_MTD_BYTE_WRITE=y
+# CONFIG_MTD_CONFIG is not set
+
+#
+# MTD Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+# CONFIG_RAMMTD is not set
+# CONFIG_MTD_AT24XX is not set
+# CONFIG_MTD_AT25 is not set
+# CONFIG_MTD_AT45DB is not set
+# CONFIG_MTD_M25P is not set
+# CONFIG_MTD_SMART is not set
+# CONFIG_MTD_RAMTRON is not set
+# CONFIG_MTD_SST25 is not set
+# CONFIG_MTD_SST25XX is not set
+# CONFIG_MTD_SST39FV is not set
+# CONFIG_MTD_W25 is not set
+CONFIG_EEPROM=y
+# CONFIG_SPI_EE_25XX is not set
 CONFIG_PIPES=y
 # CONFIG_PM is not set
 # CONFIG_POWER is not set
 # CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
 CONFIG_SERIAL=y
 # CONFIG_DEV_LOWCONSOLE is not set
 CONFIG_SERIAL_REMOVABLE=y
 # CONFIG_16550_UART is not set
+# CONFIG_ARCH_HAVE_UART is not set
+# CONFIG_ARCH_HAVE_UART0 is not set
+# CONFIG_ARCH_HAVE_UART1 is not set
+# CONFIG_ARCH_HAVE_UART2 is not set
+# CONFIG_ARCH_HAVE_UART3 is not set
+# CONFIG_ARCH_HAVE_UART4 is not set
 CONFIG_ARCH_HAVE_UART5=y
+# CONFIG_ARCH_HAVE_UART6 is not set
+# CONFIG_ARCH_HAVE_UART7 is not set
+# CONFIG_ARCH_HAVE_UART8 is not set
+# CONFIG_ARCH_HAVE_SCI0 is not set
+# CONFIG_ARCH_HAVE_SCI1 is not set
+# CONFIG_ARCH_HAVE_USART0 is not set
 CONFIG_ARCH_HAVE_USART1=y
 CONFIG_ARCH_HAVE_USART2=y
+# CONFIG_ARCH_HAVE_USART3 is not set
+# CONFIG_ARCH_HAVE_USART4 is not set
+# CONFIG_ARCH_HAVE_USART5 is not set
 CONFIG_ARCH_HAVE_USART6=y
+# CONFIG_ARCH_HAVE_USART7 is not set
+# CONFIG_ARCH_HAVE_USART8 is not set
+# CONFIG_ARCH_HAVE_OTHER_UART is not set
+
+#
+# USART Configuration
+#
+CONFIG_USART1_ISUART=y
+CONFIG_USART2_ISUART=y
+CONFIG_USART6_ISUART=y
 CONFIG_MCU_SERIAL=y
 CONFIG_STANDARD_SERIAL=y
 CONFIG_SERIAL_NPOLLWAITERS=2
+CONFIG_SERIAL_IFLOWCONTROL=y
+CONFIG_SERIAL_OFLOWCONTROL=y
+CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
+CONFIG_SERIAL_IFLOWCONTROL_LOWER_WATERMARK=10
+CONFIG_SERIAL_IFLOWCONTROL_UPPER_WATERMARK=90
+CONFIG_ARCH_HAVE_SERIAL_TERMIOS=y
+CONFIG_SERIAL_TERMIOS=y
 CONFIG_USART1_SERIAL_CONSOLE=y
 # CONFIG_USART2_SERIAL_CONSOLE is not set
 # CONFIG_UART5_SERIAL_CONSOLE is not set
 # CONFIG_USART6_SERIAL_CONSOLE is not set
+# CONFIG_OTHER_SERIAL_CONSOLE is not set
 # CONFIG_NO_SERIAL_CONSOLE is not set
 
 #
-# MTD Configuration
-#
-CONFIG_MTD_PARTITION=y
-CONFIG_MTD_BYTE_WRITE=y
-
-#
-# MTD Device Drivers
-#
-# CONFIG_RAMMTD is not set
-# CONFIG_MTD_AT24XX is not set
-# CONFIG_MTD_AT45DB is not set
-# CONFIG_MTD_M25P is not set
-# CONFIG_MTD_SMART is not set
-# CONFIG_MTD_RAMTRON is not set
-CONFIG_RAMTRON_WRITEWAIT=y
-CONFIG_RAMTRON_SETSPEED=y
-# CONFIG_MTD_SST25 is not set
-# CONFIG_MTD_SST39FV is not set
-# CONFIG_MTD_W25 is not set
-
-#
 # USART1 Configuration
 #
 CONFIG_USART1_RXBUFSIZE=300
@@ -599,11 +760,6 @@ CONFIG_USART6_PARITY=0
 CONFIG_USART6_2STOP=0
 # CONFIG_USART6_IFLOWCONTROL is not set
 # CONFIG_USART6_OFLOWCONTROL is not set
-CONFIG_SERIAL_IFLOWCONTROL=y
-CONFIG_SERIAL_OFLOWCONTROL=y
-CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
-CONFIG_SERIAL_IFLOWCONTROL_LOWER_WATERMARK=10
-CONFIG_SERIAL_IFLOWCONTROL_UPPER_WATERMARK=90
 CONFIG_USBDEV=y
 
 #
@@ -614,8 +770,8 @@ CONFIG_USBDEV=y
 # CONFIG_USBDEV_SELFPOWERED is not set
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
-# CONFIG_USBDEV_REMOTEWAKEUP is not set
 # CONFIG_USBDEV_DMA is not set
+# CONFIG_ARCH_USBDEV_STALLQUEUE is not set
 # CONFIG_USBDEV_TRACE is not set
 
 #
@@ -624,7 +780,7 @@ CONFIG_USBDEV_MAXPOWER=500
 # CONFIG_USBDEV_COMPOSITE is not set
 # CONFIG_PL2303 is not set
 CONFIG_CDCACM=y
-CONFIG_CDCACM_CONSOLE=n
+# CONFIG_CDCACM_CONSOLE is not set
 CONFIG_CDCACM_EP0MAXPACKET=64
 CONFIG_CDCACM_EPINTIN=1
 CONFIG_CDCACM_EPINTIN_FSSIZE=64
@@ -706,8 +862,8 @@ CONFIG_FS_BINFS=y
 #
 # System Logging
 #
-# CONFIG_SYSLOG_ENABLE is not set
 CONFIG_SYSLOG=y
+# CONFIG_SYSLOG_TIMESTAMP is not set
 CONFIG_SYSLOG_CHAR=y
 CONFIG_SYSLOG_DEVPATH="/dev/ttyS0"
 
@@ -732,7 +888,7 @@ CONFIG_GRAN_INTR=y
 # CONFIG_AUDIO is not set
 
 #
-# Binary Formats
+# Binary Loader
 #
 # CONFIG_BINFMT_DISABLE is not set
 # CONFIG_BINFMT_EXEPATH is not set
@@ -755,6 +911,7 @@ CONFIG_NUNGET_CHARS=2
 CONFIG_LIB_HOMEDIR="/"
 # CONFIG_NOPRINTF_FIELDWIDTH is not set
 CONFIG_LIBC_FLOATINGPOINT=y
+# CONFIG_LIBC_IOCTL_VARIADIC is not set
 CONFIG_LIB_RAND_ORDER=1
 # CONFIG_EOL_IS_CR is not set
 # CONFIG_EOL_IS_LF is not set
@@ -766,7 +923,10 @@ CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
 CONFIG_LIBC_STRERROR=y
 # CONFIG_LIBC_STRERROR_SHORT is not set
 # CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_LIBC_TMPDIR="/tmp"
+CONFIG_LIBC_MAX_TMPFILE=32
 CONFIG_ARCH_LOWPUTC=y
+# CONFIG_LIBC_LOCALTIME is not set
 CONFIG_LIB_SENDFILE_BUFSIZE=512
 # CONFIG_ARCH_ROMGETC is not set
 CONFIG_ARCH_OPTIMIZED_FUNCTIONS=y
@@ -786,15 +946,6 @@ CONFIG_ARCH_MEMCPY=y
 #
 # Non-standard Library Support
 #
-CONFIG_SCHED_WORKQUEUE=y
-CONFIG_SCHED_HPWORK=y
-CONFIG_SCHED_WORKPRIORITY=192
-CONFIG_SCHED_WORKPERIOD=5000
-CONFIG_SCHED_WORKSTACKSIZE=2048
-CONFIG_SCHED_LPWORK=y
-CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKPERIOD=50000
-CONFIG_SCHED_LPWORKSTACKSIZE=2048
 # CONFIG_LIB_KBDCODEC is not set
 # CONFIG_LIB_SLCDCODEC is not set
 
@@ -827,6 +978,7 @@ CONFIG_BUILTIN_PROXY_STACKSIZE=1024
 # CONFIG_EXAMPLES_CAN is not set
 # CONFIG_EXAMPLES_CONFIGDATA is not set
 # CONFIG_EXAMPLES_CPUHOG is not set
+# CONFIG_EXAMPLES_CXXTEST is not set
 # CONFIG_EXAMPLES_DHCPD is not set
 # CONFIG_EXAMPLES_ELF is not set
 # CONFIG_EXAMPLES_FTPC is not set
@@ -847,6 +999,7 @@ CONFIG_EXAMPLES_MOUNT_RAMDEVNO=0
 # CONFIG_EXAMPLES_MTDPART is not set
 # CONFIG_EXAMPLES_NRF24L01TERM is not set
 CONFIG_EXAMPLES_NSH=y
+# CONFIG_EXAMPLES_NSH_CXXINITIALIZE is not set
 # CONFIG_EXAMPLES_NULL is not set
 # CONFIG_EXAMPLES_NX is not set
 # CONFIG_EXAMPLES_NXTERM is not set
@@ -884,11 +1037,13 @@ CONFIG_EXAMPLES_NSH=y
 # Graphics Support
 #
 # CONFIG_TIFF is not set
+# CONFIG_GRAPHICS_TRAVELER is not set
 
 #
 # Interpreters
 #
 # CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_BAS is not set
 # CONFIG_INTERPRETERS_PCODE is not set
 
 #
@@ -899,17 +1054,14 @@ CONFIG_EXAMPLES_NSH=y
 # Networking Utilities
 #
 # CONFIG_NETUTILS_CODECS is not set
-# CONFIG_NETUTILS_DHCPC is not set
 # CONFIG_NETUTILS_DHCPD is not set
 # CONFIG_NETUTILS_FTPC is not set
 # CONFIG_NETUTILS_FTPD is not set
 # CONFIG_NETUTILS_JSON is not set
-# CONFIG_NETUTILS_RESOLV is not set
 # CONFIG_NETUTILS_SMTP is not set
-# CONFIG_NETUTILS_TELNETD is not set
 # CONFIG_NETUTILS_TFTPC is not set
 # CONFIG_NETUTILS_THTTPD is not set
-# CONFIG_NETUTILS_UIPLIB is not set
+# CONFIG_NETUTILS_NETLIB is not set
 # CONFIG_NETUTILS_WEBCLIENT is not set
 
 #
@@ -939,10 +1091,14 @@ CONFIG_NSH_BUILTIN_APPS=y
 #
 # Disable Individual commands
 #
+# CONFIG_NSH_DISABLE_ADDROUTE is not set
 # CONFIG_NSH_DISABLE_CAT is not set
 # CONFIG_NSH_DISABLE_CD is not set
 # CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_CMP is not set
 # CONFIG_NSH_DISABLE_DD is not set
+# CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_DELROUTE is not set
 # CONFIG_NSH_DISABLE_ECHO is not set
 # CONFIG_NSH_DISABLE_EXEC is not set
 # CONFIG_NSH_DISABLE_EXIT is not set
@@ -962,9 +1118,7 @@ CONFIG_NSH_BUILTIN_APPS=y
 # CONFIG_NSH_DISABLE_MH is not set
 # CONFIG_NSH_DISABLE_MOUNT is not set
 # CONFIG_NSH_DISABLE_MW is not set
-# CONFIG_NSH_DISABLE_NSFMOUNT is not set
 # CONFIG_NSH_DISABLE_PS is not set
-# CONFIG_NSH_DISABLE_PING is not set
 # CONFIG_NSH_DISABLE_PUT is not set
 # CONFIG_NSH_DISABLE_PWD is not set
 # CONFIG_NSH_DISABLE_RM is not set
@@ -984,30 +1138,29 @@ CONFIG_NSH_BUILTIN_APPS=y
 #
 # CONFIG_NSH_CMDOPT_DF_H is not set
 CONFIG_NSH_CODECS_BUFSIZE=128
+CONFIG_NSH_CMDOPT_HEXDUMP=y
 CONFIG_NSH_FILEIOSIZE=512
 CONFIG_NSH_STRERROR=y
+
+#
+# Scripting Support
+#
 # CONFIG_NSH_DISABLESCRIPT is not set
-# CONFIG_NSH_DISABLEBG is not set
+# CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_LOOPS is not set
 CONFIG_NSH_ROMFSETC=y
 # CONFIG_NSH_ROMFSRC is not set
 CONFIG_NSH_ROMFSMOUNTPT="/etc"
 CONFIG_NSH_INITSCRIPT="init.d/rcS"
 CONFIG_NSH_ROMFSDEVNO=0
 CONFIG_NSH_ROMFSSECTSIZE=128
+# CONFIG_NSH_DEFAULTROMFS is not set
 CONFIG_NSH_ARCHROMFS=y
+# CONFIG_NSH_CUSTOMROMFS is not set
 CONFIG_NSH_FATDEVNO=1
 CONFIG_NSH_FATSECTSIZE=512
 CONFIG_NSH_FATNSECTORS=1024
 CONFIG_NSH_FATMOUNTPT="/tmp"
-CONFIG_NSH_CONSOLE=y
-# CONFIG_NSH_USBCONSOLE is not set
-
-#
-# Scripting Support
-#
-# CONFIG_NSH_DISABLESCRIPT is not set
-# CONFIG_NSH_DISABLE_ITEF is not set
-# CONFIG_NSH_DISABLE_LOOPS is not set
 
 #
 # Console Configuration
@@ -1022,7 +1175,12 @@ CONFIG_NSH_ARCHINIT=y
 #
 
 #
-# System NSH Add-Ons
+# Platform-specific Support
+#
+# CONFIG_PLATFORM_CONFIGDATA is not set
+
+#
+# System Libraries and NSH Add-Ons
 #
 
 #
@@ -1031,9 +1189,18 @@ CONFIG_NSH_ARCHINIT=y
 # CONFIG_SYSTEM_FREE is not set
 
 #
-# I2C tool
+# EMACS-like Command Line Editor
 #
-# CONFIG_SYSTEM_I2CTOOL is not set
+# CONFIG_SYSTEM_CLE is not set
+
+#
+# CU Minimal Terminal
+#
+CONFIG_SYSTEM_CUTERM=y
+CONFIG_SYSTEM_CUTERM_DEFAULT_DEVICE="/dev/ttyS0"
+CONFIG_SYSTEM_CUTERM_DEFAULT_BAUD=57600
+CONFIG_SYSTEM_CUTERM_STACKSIZE=2048
+CONFIG_SYSTEM_CUTERM_PRIORITY=100
 
 #
 # FLASH Program Installation
@@ -1043,6 +1210,31 @@ CONFIG_NSH_ARCHINIT=y
 #
 # FLASH Erase-all Command
 #
+# CONFIG_SYSTEM_FLASH_ERASEALL is not set
+
+#
+# Intel HEX to binary conversion
+#
+# CONFIG_SYSTEM_HEX2BIN is not set
+
+#
+# I2C tool
+#
+# CONFIG_SYSTEM_I2CTOOL is not set
+
+#
+# INI File Parser
+#
+# CONFIG_SYSTEM_INIFILE is not set
+
+#
+# NxPlayer media player library / command Line
+#
+
+#
+# RAM test
+#
+# CONFIG_SYSTEM_RAMTEST is not set
 
 #
 # readline()
@@ -1097,6 +1289,7 @@ CONFIG_SYSTEM_SYSINFO_STACKSIZE=1024
 # USB CDC/ACM Device Commands
 #
 CONFIG_SYSTEM_CDCACM=y
+CONFIG_SYSTEM_CDCACM_DEVMINOR=0
 
 #
 # USB Composite Device Commands
diff --git a/nuttx-configs/px4io-v1/nsh/defconfig b/nuttx-configs/px4io-v1/nsh/defconfig
index afe7373ad..54161dc77 100755
--- a/nuttx-configs/px4io-v1/nsh/defconfig
+++ b/nuttx-configs/px4io-v1/nsh/defconfig
@@ -1,545 +1,978 @@
-############################################################################
-# configs/px4io-v1/nsh/defconfig
-#
-#   Copyright (C) 2012 PX4 Development Team. All rights reserved.
-#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-#
-# architecture selection
-#
-# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
-#   processor architecture.
-# CONFIG_ARCH_family - for use in C code.  This identifies the
-#   particular chip family that the architecture is implemented
-#   in.
-# CONFIG_ARCH_architecture - for use in C code.  This identifies the
-#   specific architecture within the chip family.
-# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
-# CONFIG_ARCH_CHIP_name - For use in C code
-# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
-#   the board that supports the particular chip or SoC.
-# CONFIG_ARCH_BOARD_name - for use in C code
-# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
-# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
-# CONFIG_RAM_SIZE - Describes the installed DRAM.
-# CONFIG_RAM_START - The start address of DRAM (physical)
-# CONFIG_ARCH_IRQPRIO - The ST32F100CB supports interrupt prioritization
-# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
-#   stack. If defined, this symbol is the size of the interrupt
-#   stack in bytes.  If not defined, the user task stacks will be
-#   used during interrupt handling.
-# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
-# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader.
-# CONFIG_ARCH_LEDS -  Use LEDs to show state. Unique to board architecture.
-# CONFIG_ARCH_BUTTONS -  Enable support for buttons. Unique to board architecture.
-# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
-#   cause a 100 second delay during boot-up.  This 100 second delay
-#   serves no purpose other than it allows you to calibrate
-#   CONFIG_BOARD_LOOPSPERMSEC.  You simply use a stop watch to measure
-#   the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
-#   the delay actually is 100 seconds.
-# CONFIG_ARCH_DMA - Support DMA initialization
 #
-CONFIG_ARCH="arm"
-CONFIG_ARCH_ARM=y
-CONFIG_ARCH_CORTEXM3=y
-CONFIG_ARCH_CHIP="stm32"
-CONFIG_ARCH_CHIP_STM32F100C8=y
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
 #
-# Board Selection
+
 #
-CONFIG_ARCH_BOARD_PX4IO_V1=y
-# CONFIG_ARCH_BOARD_CUSTOM is not set
-CONFIG_ARCH_BOARD="px4io-v1"
-CONFIG_ARCH_BOARD_PX4IO_V1=y
-CONFIG_BOARD_LOOPSPERMSEC=2000
-CONFIG_RAM_SIZE=0x00002000
-CONFIG_RAM_START=0x20000000
-CONFIG_ARCH_INTERRUPTSTACK=n
-CONFIG_ARCH_STACKDUMP=y
-CONFIG_ARCH_BOOTLOADER=n
-CONFIG_ARCH_LEDS=n
-CONFIG_ARCH_BUTTONS=n
-CONFIG_ARCH_CALIBRATION=n
-CONFIG_ARCH_DMA=y
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_DEFAULT_SMALL is not set
+CONFIG_HOST_LINUX=y
+# CONFIG_HOST_OSX is not set
+# CONFIG_HOST_WINDOWS is not set
+# CONFIG_HOST_OTHER is not set
+
+#
+# Build Configuration
+#
+CONFIG_APPS_DIR="../apps"
+CONFIG_BUILD_FLAT=y
+# CONFIG_BUILD_2PASS is not set
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+# CONFIG_INTELHEX_BINARY is not set
+# CONFIG_MOTOROLA_SREC is not set
+CONFIG_RAW_BINARY=y
+# CONFIG_UBOOT_UIMAGE is not set
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDINT_H is not set
+# CONFIG_ARCH_STDBOOL_H is not set
 CONFIG_ARCH_MATH_H=y
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
 
-CONFIG_ARMV7M_CMNVECTOR=y
-# CONFIG_ARMV7M_STACKCHECK is not set
+#
+# Debug Options
+#
+# CONFIG_DEBUG is not set
+CONFIG_ARCH_HAVE_STACKCHECK=y
+CONFIG_ARCH_HAVE_HEAPCHECK=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_ARCH_HAVE_CUSTOMOPT=y
+# CONFIG_DEBUG_NOOPT is not set
+# CONFIG_DEBUG_CUSTOMOPT is not set
+CONFIG_DEBUG_FULLOPT=y
 
 #
-# JTAG Enable settings (by default JTAG-DP and SW-DP are disabled):
+# System Type
 #
-#   CONFIG_STM32_DFU - Use the DFU bootloader, not JTAG
+CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
+
 #
-# JTAG Enable options:
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_A1X is not set
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_EFM32 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+# CONFIG_ARCH_CHIP_KINETIS is not set
+# CONFIG_ARCH_CHIP_KL is not set
+# CONFIG_ARCH_CHIP_LM is not set
+# CONFIG_ARCH_CHIP_TIVA is not set
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_NUC1XX is not set
+# CONFIG_ARCH_CHIP_SAMA5 is not set
+# CONFIG_ARCH_CHIP_SAMD is not set
+# CONFIG_ARCH_CHIP_SAM34 is not set
+CONFIG_ARCH_CHIP_STM32=y
+# CONFIG_ARCH_CHIP_STR71X is not set
+# CONFIG_ARCH_ARM7TDMI is not set
+# CONFIG_ARCH_ARM926EJS is not set
+# CONFIG_ARCH_ARM920T is not set
+# CONFIG_ARCH_CORTEXM0 is not set
+CONFIG_ARCH_CORTEXM3=y
+# CONFIG_ARCH_CORTEXM4 is not set
+# CONFIG_ARCH_CORTEXA5 is not set
+# CONFIG_ARCH_CORTEXA8 is not set
+CONFIG_ARCH_FAMILY="armv7-m"
+CONFIG_ARCH_CHIP="stm32"
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_ARCH_HAVE_CMNVECTOR=y
+CONFIG_ARMV7M_CMNVECTOR=y
+# CONFIG_ARCH_HAVE_FPU is not set
+# CONFIG_ARMV7M_MPU is not set
+
 #
-#   CONFIG_STM32_JTAG_FULL_ENABLE - Enables full SWJ (JTAG-DP + SW-DP)
-#   CONFIG_STM32_JTAG_NOJNTRST_ENABLE - Enables full SWJ (JTAG-DP + SW-DP)
-#     but without JNTRST.
-#   CONFIG_STM32_JTAG_SW_ENABLE - Set JTAG-DP disabled and SW-DP enabled
+# ARMV7M Configuration Options
 #
-CONFIG_STM32_DFU=n
-CONFIG_STM32_JTAG_FULL_ENABLE=y
-CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n
-CONFIG_STM32_JTAG_SW_ENABLE=n
+# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
+CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y
+# CONFIG_ARMV7M_STACKCHECK is not set
+# CONFIG_ARMV7M_ITMSYSLOG is not set
 
 #
-# Individual subsystems can be enabled:
+# STM32 Configuration Options
+#
+# CONFIG_ARCH_CHIP_STM32L151C6 is not set
+# CONFIG_ARCH_CHIP_STM32L151C8 is not set
+# CONFIG_ARCH_CHIP_STM32L151CB is not set
+# CONFIG_ARCH_CHIP_STM32L151R6 is not set
+# CONFIG_ARCH_CHIP_STM32L151R8 is not set
+# CONFIG_ARCH_CHIP_STM32L151RB is not set
+# CONFIG_ARCH_CHIP_STM32L151V6 is not set
+# CONFIG_ARCH_CHIP_STM32L151V8 is not set
+# CONFIG_ARCH_CHIP_STM32L151VB is not set
+# CONFIG_ARCH_CHIP_STM32L152C6 is not set
+# CONFIG_ARCH_CHIP_STM32L152C8 is not set
+# CONFIG_ARCH_CHIP_STM32L152CB is not set
+# CONFIG_ARCH_CHIP_STM32L152R6 is not set
+# CONFIG_ARCH_CHIP_STM32L152R8 is not set
+# CONFIG_ARCH_CHIP_STM32L152RB is not set
+# CONFIG_ARCH_CHIP_STM32L152V6 is not set
+# CONFIG_ARCH_CHIP_STM32L152V8 is not set
+# CONFIG_ARCH_CHIP_STM32L152VB is not set
+# CONFIG_ARCH_CHIP_STM32L162ZD is not set
+CONFIG_ARCH_CHIP_STM32F100C8=y
+# CONFIG_ARCH_CHIP_STM32F100CB is not set
+# CONFIG_ARCH_CHIP_STM32F100R8 is not set
+# CONFIG_ARCH_CHIP_STM32F100RB is not set
+# CONFIG_ARCH_CHIP_STM32F100RC is not set
+# CONFIG_ARCH_CHIP_STM32F100RD is not set
+# CONFIG_ARCH_CHIP_STM32F100RE is not set
+# CONFIG_ARCH_CHIP_STM32F100V8 is not set
+# CONFIG_ARCH_CHIP_STM32F100VB is not set
+# CONFIG_ARCH_CHIP_STM32F100VC is not set
+# CONFIG_ARCH_CHIP_STM32F100VD is not set
+# CONFIG_ARCH_CHIP_STM32F100VE is not set
+# CONFIG_ARCH_CHIP_STM32F102CB is not set
+# CONFIG_ARCH_CHIP_STM32F103T8 is not set
+# CONFIG_ARCH_CHIP_STM32F103TB is not set
+# CONFIG_ARCH_CHIP_STM32F103C4 is not set
+# CONFIG_ARCH_CHIP_STM32F103C8 is not set
+# CONFIG_ARCH_CHIP_STM32F103CB is not set
+# CONFIG_ARCH_CHIP_STM32F103R8 is not set
+# CONFIG_ARCH_CHIP_STM32F103RB is not set
+# CONFIG_ARCH_CHIP_STM32F103RC is not set
+# CONFIG_ARCH_CHIP_STM32F103RD is not set
+# CONFIG_ARCH_CHIP_STM32F103RE is not set
+# CONFIG_ARCH_CHIP_STM32F103RG is not set
+# CONFIG_ARCH_CHIP_STM32F103V8 is not set
+# CONFIG_ARCH_CHIP_STM32F103VB is not set
+# CONFIG_ARCH_CHIP_STM32F103VC is not set
+# CONFIG_ARCH_CHIP_STM32F103VE is not set
+# CONFIG_ARCH_CHIP_STM32F103ZE is not set
+# CONFIG_ARCH_CHIP_STM32F105VB is not set
+# CONFIG_ARCH_CHIP_STM32F107VC is not set
+# CONFIG_ARCH_CHIP_STM32F207IG is not set
+# CONFIG_ARCH_CHIP_STM32F207ZE is not set
+# CONFIG_ARCH_CHIP_STM32F302CB is not set
+# CONFIG_ARCH_CHIP_STM32F302CC is not set
+# CONFIG_ARCH_CHIP_STM32F302RB is not set
+# CONFIG_ARCH_CHIP_STM32F302RC is not set
+# CONFIG_ARCH_CHIP_STM32F302VB is not set
+# CONFIG_ARCH_CHIP_STM32F302VC is not set
+# CONFIG_ARCH_CHIP_STM32F303CB is not set
+# CONFIG_ARCH_CHIP_STM32F303CC is not set
+# CONFIG_ARCH_CHIP_STM32F303RB is not set
+# CONFIG_ARCH_CHIP_STM32F303RC is not set
+# CONFIG_ARCH_CHIP_STM32F303VB is not set
+# CONFIG_ARCH_CHIP_STM32F303VC is not set
+# CONFIG_ARCH_CHIP_STM32F401RE is not set
+# CONFIG_ARCH_CHIP_STM32F411RE is not set
+# CONFIG_ARCH_CHIP_STM32F405RG is not set
+# CONFIG_ARCH_CHIP_STM32F405VG is not set
+# CONFIG_ARCH_CHIP_STM32F405ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407VE is not set
+# CONFIG_ARCH_CHIP_STM32F407VG is not set
+# CONFIG_ARCH_CHIP_STM32F407ZE is not set
+# CONFIG_ARCH_CHIP_STM32F407ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407IE is not set
+# CONFIG_ARCH_CHIP_STM32F407IG is not set
+# CONFIG_ARCH_CHIP_STM32F427V is not set
+# CONFIG_ARCH_CHIP_STM32F427Z is not set
+# CONFIG_ARCH_CHIP_STM32F427I is not set
+# CONFIG_ARCH_CHIP_STM32F429V is not set
+# CONFIG_ARCH_CHIP_STM32F429Z is not set
+# CONFIG_ARCH_CHIP_STM32F429I is not set
+# CONFIG_ARCH_CHIP_STM32F429B is not set
+# CONFIG_ARCH_CHIP_STM32F429N is not set
+# CONFIG_STM32_STM32L15XX is not set
+# CONFIG_STM32_ENERGYLITE is not set
+CONFIG_STM32_STM32F10XX=y
+CONFIG_STM32_VALUELINE=y
+# CONFIG_STM32_CONNECTIVITYLINE is not set
+# CONFIG_STM32_PERFORMANCELINE is not set
+# CONFIG_STM32_USBACCESSLINE is not set
+# CONFIG_STM32_HIGHDENSITY is not set
+# CONFIG_STM32_MEDIUMDENSITY is not set
+# CONFIG_STM32_LOWDENSITY is not set
+# CONFIG_STM32_STM32F20XX is not set
+# CONFIG_STM32_STM32F207 is not set
+# CONFIG_STM32_STM32F30XX is not set
+# CONFIG_STM32_STM32F40XX is not set
+# CONFIG_STM32_STM32F401 is not set
+# CONFIG_STM32_STM32F411 is not set
+# CONFIG_STM32_STM32F405 is not set
+# CONFIG_STM32_STM32F407 is not set
+# CONFIG_STM32_STM32F427 is not set
+# CONFIG_STM32_STM32F429 is not set
+
 #
-# AHB: 
+# STM32 Peripheral Support
+#
+# CONFIG_STM32_HAVE_CCM is not set
+# CONFIG_STM32_HAVE_USBDEV is not set
+# CONFIG_STM32_HAVE_OTGFS is not set
+# CONFIG_STM32_HAVE_FSMC is not set
+CONFIG_STM32_HAVE_USART3=y
+CONFIG_STM32_HAVE_UART4=y
+CONFIG_STM32_HAVE_UART5=y
+# CONFIG_STM32_HAVE_USART6 is not set
+# CONFIG_STM32_HAVE_UART7 is not set
+# CONFIG_STM32_HAVE_UART8 is not set
+CONFIG_STM32_HAVE_TIM1=y
+CONFIG_STM32_HAVE_TIM5=y
+CONFIG_STM32_HAVE_TIM6=y
+CONFIG_STM32_HAVE_TIM7=y
+# CONFIG_STM32_HAVE_TIM8 is not set
+# CONFIG_STM32_HAVE_TIM9 is not set
+# CONFIG_STM32_HAVE_TIM10 is not set
+# CONFIG_STM32_HAVE_TIM11 is not set
+CONFIG_STM32_HAVE_TIM12=y
+CONFIG_STM32_HAVE_TIM13=y
+CONFIG_STM32_HAVE_TIM14=y
+CONFIG_STM32_HAVE_TIM15=y
+CONFIG_STM32_HAVE_TIM16=y
+CONFIG_STM32_HAVE_TIM17=y
+CONFIG_STM32_HAVE_ADC2=y
+# CONFIG_STM32_HAVE_ADC3 is not set
+# CONFIG_STM32_HAVE_ADC4 is not set
+# CONFIG_STM32_HAVE_CAN1 is not set
+# CONFIG_STM32_HAVE_CAN2 is not set
+# CONFIG_STM32_HAVE_RNG is not set
+# CONFIG_STM32_HAVE_ETHMAC is not set
+# CONFIG_STM32_HAVE_SPI2 is not set
+# CONFIG_STM32_HAVE_SPI3 is not set
+# CONFIG_STM32_HAVE_SPI4 is not set
+# CONFIG_STM32_HAVE_SPI5 is not set
+CONFIG_STM32_ADC1=y
+# CONFIG_STM32_ADC2 is not set
+# CONFIG_STM32_BKP is not set
+# CONFIG_STM32_CEC is not set
+# CONFIG_STM32_CRC is not set
 CONFIG_STM32_DMA1=y
-CONFIG_STM32_DMA2=n
-CONFIG_STM32_CRC=n
-# APB1:
-# Timers 2,3 and 4 are owned by the PWM driver
-CONFIG_STM32_TIM2=n
-CONFIG_STM32_TIM3=n
-CONFIG_STM32_TIM4=n
-CONFIG_STM32_TIM5=n
-CONFIG_STM32_TIM6=n
-CONFIG_STM32_TIM7=n
-CONFIG_STM32_WWDG=n
-CONFIG_STM32_SPI2=n
+# CONFIG_STM32_DAC1 is not set
+# CONFIG_STM32_DAC2 is not set
+CONFIG_STM32_I2C1=y
+# CONFIG_STM32_I2C2 is not set
+# CONFIG_STM32_PWR is not set
+# CONFIG_STM32_SPI1 is not set
+# CONFIG_STM32_TIM1 is not set
+# CONFIG_STM32_TIM2 is not set
+# CONFIG_STM32_TIM3 is not set
+# CONFIG_STM32_TIM4 is not set
+# CONFIG_STM32_TIM5 is not set
+# CONFIG_STM32_TIM6 is not set
+# CONFIG_STM32_TIM7 is not set
+# CONFIG_STM32_TIM12 is not set
+# CONFIG_STM32_TIM13 is not set
+# CONFIG_STM32_TIM14 is not set
+# CONFIG_STM32_TIM15 is not set
+# CONFIG_STM32_TIM16 is not set
+# CONFIG_STM32_TIM17 is not set
+CONFIG_STM32_USART1=y
 CONFIG_STM32_USART2=y
 CONFIG_STM32_USART3=y
-CONFIG_STM32_I2C1=y
-CONFIG_STM32_I2C2=n
+# CONFIG_STM32_UART4 is not set
+# CONFIG_STM32_UART5 is not set
+# CONFIG_STM32_IWDG is not set
+# CONFIG_STM32_WWDG is not set
+CONFIG_STM32_ADC=y
+CONFIG_STM32_I2C=y
+
+#
+# Alternate Pin Mapping
+#
+# CONFIG_STM32_I2C1_REMAP is not set
+# CONFIG_STM32_USART1_REMAP is not set
+# CONFIG_STM32_USART2_REMAP is not set
+CONFIG_STM32_USART3_NO_REMAP=y
+# CONFIG_STM32_USART3_FULL_REMAP is not set
+# CONFIG_STM32_USART3_PARTIAL_REMAP is not set
+# CONFIG_STM32_JTAG_DISABLE is not set
+# CONFIG_STM32_JTAG_FULL_ENABLE is not set
+# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
+CONFIG_STM32_JTAG_SW_ENABLE=y
+CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
+# CONFIG_STM32_FORCEPOWER is not set
+# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
+# CONFIG_STM32_DMACAPABLE is not set
+CONFIG_STM32_USART=y
+
+#
+# U[S]ART Configuration
+#
+# CONFIG_USART1_RS485 is not set
+CONFIG_USART1_RXDMA=y
+# CONFIG_USART2_RS485 is not set
+# CONFIG_USART2_RXDMA is not set
+# CONFIG_USART3_RS485 is not set
+CONFIG_USART3_RXDMA=y
+# CONFIG_SERIAL_DISABLE_REORDERING is not set
+# CONFIG_STM32_FLOWCONTROL_BROKEN is not set
+CONFIG_STM32_USART_SINGLEWIRE=y
+
+#
+# I2C Configuration
+#
+# CONFIG_STM32_I2C_ALT is not set
+# CONFIG_STM32_I2C_DYNTIMEO is not set
 CONFIG_STM32_I2CTIMEOSEC=0
 CONFIG_STM32_I2CTIMEOMS=1
 CONFIG_STM32_I2CTIMEOTICKS=1
-CONFIG_STM32_BKP=n
-CONFIG_STM32_PWR=n
-CONFIG_STM32_DAC=n
-# APB2:
-# We use our own ADC driver, but leave this on for clocking purposes.
-CONFIG_STM32_ADC1=y
-CONFIG_STM32_ADC2=n
-# TIM1 is owned by the HRT
-CONFIG_STM32_TIM1=n
-CONFIG_STM32_SPI1=n
-CONFIG_STM32_TIM8=n
-CONFIG_STM32_USART1=y
-CONFIG_STM32_ADC3=n
+# CONFIG_STM32_I2C_DUTY16_9 is not set
 
+#
+# USB FS Host Configuration
+#
 
 #
-# STM32F100 specific serial device driver settings
+# USB HS Host Configuration
 #
-# CONFIG_USARTn_SERIAL_CONSOLE - selects the USARTn for the
-#   console and ttys0 (default is the USART1).
-# CONFIG_USARTn_RXBUFSIZE - Characters are buffered as received.
-#   This specific the size of the receive buffer
-# CONFIG_USARTn_TXBUFSIZE - Characters are buffered before
-#   being sent.  This specific the size of the transmit buffer
-# CONFIG_USARTn_BAUD - The configure BAUD of the UART.  Must be
-# CONFIG_USARTn_BITS - The number of bits.  Must be either 7 or 8.
-# CONFIG_USARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
-# CONFIG_USARTn_2STOP - Two stop bits
+
+#
+# USB Host Debug Configuration
 #
-CONFIG_SERIAL_TERMIOS=y
-CONFIG_STANDARD_SERIAL=y
 
-CONFIG_USART1_SERIAL_CONSOLE=y
-CONFIG_USART2_SERIAL_CONSOLE=n
-CONFIG_USART3_SERIAL_CONSOLE=n
+#
+# USB Device Configuration
+#
 
-CONFIG_USART1_TXBUFSIZE=64
-CONFIG_USART2_TXBUFSIZE=64
-CONFIG_USART3_TXBUFSIZE=64
+#
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_VECNOTIRQ is not set
+CONFIG_ARCH_DMA=y
+CONFIG_ARCH_HAVE_IRQPRIO=y
+# CONFIG_ARCH_L2CACHE is not set
+# CONFIG_ARCH_HAVE_COHERENT_DCACHE is not set
+# CONFIG_ARCH_HAVE_ADDRENV is not set
+# CONFIG_ARCH_NEED_ADDRENV_MAPPING is not set
+CONFIG_ARCH_HAVE_VFORK=y
+# CONFIG_ARCH_HAVE_MMU is not set
+CONFIG_ARCH_HAVE_MPU=y
+# CONFIG_ARCH_NAND_HWECC is not set
+# CONFIG_ARCH_HAVE_EXTCLK is not set
+# CONFIG_ARCH_USE_MPU is not set
+# CONFIG_ARCH_IRQPRIO is not set
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
+# CONFIG_ARCH_IDLE_CUSTOM is not set
+# CONFIG_ARCH_HAVE_RAMFUNCS is not set
+CONFIG_ARCH_HAVE_RAMVECTORS=y
+# CONFIG_ARCH_RAMVECTORS is not set
 
-CONFIG_USART1_RXBUFSIZE=64
-CONFIG_USART2_RXBUFSIZE=64
-CONFIG_USART3_RXBUFSIZE=64
+#
+# Board Settings
+#
+CONFIG_BOARD_LOOPSPERMSEC=2000
+# CONFIG_ARCH_CALIBRATION is not set
 
-CONFIG_USART1_BAUD=115200
-CONFIG_USART2_BAUD=115200
-CONFIG_USART3_BAUD=115200
+#
+# Interrupt options
+#
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=0
+CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y
+# CONFIG_ARCH_HIPRI_INTERRUPT is not set
 
-CONFIG_USART1_BITS=8
-CONFIG_USART2_BITS=8
-CONFIG_USART3_BITS=8
+#
+# Boot options
+#
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
 
-CONFIG_USART1_PARITY=0
-CONFIG_USART2_PARITY=0
-CONFIG_USART3_PARITY=0
+#
+# Boot Memory Configuration
+#
+CONFIG_RAM_START=0x20000000
+CONFIG_RAM_SIZE=8192
+# CONFIG_ARCH_HAVE_SDRAM is not set
 
-CONFIG_USART1_2STOP=0
-CONFIG_USART2_2STOP=0
-CONFIG_USART3_2STOP=0
+#
+# Board Selection
+#
+CONFIG_ARCH_BOARD_PX4IO_V1=y
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="px4io-v1"
 
-CONFIG_USART1_RXDMA=y
-SERIAL_HAVE_CONSOLE_DMA=y
-# Conflicts with I2C1 DMA
-CONFIG_USART2_RXDMA=n
-CONFIG_USART3_RXDMA=y
+#
+# Custom Board Configuration
+#
+CONFIG_ARCH_BOARD_CUSTOM_DIR=""
+# CONFIG_BOARD_CUSTOM_LEDS is not set
+# CONFIG_BOARD_CUSTOM_BUTTONS is not set
 
-# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
-# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
-CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y
-# CONFIG_ARMV7M_ITMSYSLOG is not set
+#
+# Common Board Options
+#
 
 #
-# General build options
-#
-# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
-#   BSPs from www.ridgerun.com using the tools/mkimage.sh script
-# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
-#   used with many different loaders using the GNU objcopy program
-#   Should not be selected if you are not using the GNU toolchain.
-# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format
-#   used with many different loaders using the GNU objcopy program
-#   Should not be selected if you are not using the GNU toolchain.
-# CONFIG_RAW_BINARY - make a raw binary format file used with many
-#   different loaders using the GNU objcopy program.  This option
-#   should not be selected if you are not using the GNU toolchain.
-# CONFIG_HAVE_LIBM - toolchain supports libm.a
-#
-CONFIG_RRLOAD_BINARY=n
-CONFIG_INTELHEX_BINARY=n
-CONFIG_MOTOROLA_SREC=n
-CONFIG_RAW_BINARY=y
-CONFIG_HAVE_LIBM=n
-
-#
-# General OS setup
-#
-# CONFIG_APPS_DIR - Identifies the relative path to the directory
-#   that builds the application to link with NuttX.  Default: ../apps
-# CONFIG_DEBUG - enables built-in debug options
-# CONFIG_DEBUG_VERBOSE - enables verbose debug output
-# CONFIG_DEBUG_SYMBOLS - build without optimization and with
-#   debug symbols (needed for use with a debugger).
-# CONFIG_HAVE_CXX - Enable support for C++
-# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
-#   for initialization of static C++ instances for this architecture
-#   and for the selected toolchain (via up_cxxinitialize()).
-# CONFIG_MM_REGIONS - If the architecture includes multiple
-#   regions of memory to allocate from, this specifies the
-#   number of memory regions that the memory manager must
-#   handle and enables the API mm_addregion(start, end);
-# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
-#   time console output
-# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
-#   or MSEC_PER_TICK=10.  This setting may be defined to
-#   inform NuttX that the processor hardware is providing
-#   system timer interrupts at some interrupt interval other
-#   than 10 msec.
-# CONFIG_RR_INTERVAL - The round robin timeslice will be set
-#   this number of milliseconds;  Round robin scheduling can
-#   be disabled by setting this value to zero.
-# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in 
-#   scheduler to monitor system performance
-# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
-#   task name to save in the TCB.  Useful if scheduler
-#   instrumentation is selected.  Set to zero to disable.
-# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
-#   Used to initialize the internal time logic.
-# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions.
-#   You would only need this if you are concerned about accurate
-#   time conversions in the past or in the distant future.
-# CONFIG_JULIAN_TIME - Enables Julian time conversions. You
-#   would only need this if you are concerned about accurate
-#   time conversion in the distand past.  You must also define
-#   CONFIG_GREGORIAN_TIME in order to use Julian time.
-# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
-#   provides /dev/console.  Enables stdout, stderr, stdin.
-# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
-#   driver (minimul support)
-# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
-#   errorcheck mutexes. Enables pthread_mutexattr_settype().
-# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
-#   inheritance on mutexes and semaphores. 
-# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
-#   inheritance is enabled.  It defines the maximum number of
-#   different threads (minus one) that can take counts on a
-#   semaphore with priority inheritance support.  This may be 
-#   set to zero if priority inheritance is disabled OR if you
-#   are only using semaphores as mutexes (only one holder) OR
-#   if no more than two threads participate using a counting
-#   semaphore.
-# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
-#   then this setting is the maximum number of higher priority
-#   threads (minus 1) than can be waiting for another thread
-#   to release a count on a semaphore.  This value may be set
-#   to zero if no more than one thread is expected to wait for
-#   a semaphore.
-# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
-#   by task_create() when a new task is started.  If set, all
-#   files/drivers will appear to be closed in the new task.
-# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
-#   three file descriptors (stdin, stdout, stderr) by task_create()
-#   when a new task is started. If set, all files/drivers will
-#   appear to be closed in the new task except for stdin, stdout,
-#   and stderr.
-# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
-#   desciptors by task_create() when a new task is started. If
-#   set, all sockets will appear to be closed in the new task.
-# CONFIG_SCHED_WORKQUEUE.  Create a dedicated "worker" thread to
-#  handle delayed processing from interrupt handlers.  This feature
-#  is required for some drivers but, if there are not complaints,
-#  can be safely disabled.  The worker thread also performs
-#  garbage collection -- completing any delayed memory deallocations
-#  from interrupt handlers.  If the worker thread is disabled,
-#  then that clean will be performed by the IDLE thread instead
-#  (which runs at the lowest of priority and may not be appropriate
-#  if memory reclamation is of high priority).  If CONFIG_SCHED_WORKQUEUE
-#  is enabled, then the following options can also be used:
-# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker
-#  thread.  Default: 50
-# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for
-#  work in units of microseconds.  Default: 50*1000 (50 MS).
-# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker
-#  thread.  Default: CONFIG_IDLETHREAD_STACKSIZE.
-# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up
-#  the worker thread.  Default: 4
-# CONFIG_SCHED_WAITPID - Enable the waitpid() API
-# CONFIG_SCHED_ATEXIT - Enabled the atexit() API
+# Board-Specific Options
 #
-CONFIG_USER_ENTRYPOINT="user_start"
-#CONFIG_APPS_DIR=
-CONFIG_DEBUG=n
-CONFIG_DEBUG_VERBOSE=n
-CONFIG_DEBUG_SYMBOLS=y
-CONFIG_DEBUG_FS=n
-CONFIG_DEBUG_GRAPHICS=n
-CONFIG_DEBUG_LCD=n
-CONFIG_DEBUG_USB=n
-CONFIG_DEBUG_NET=n
-CONFIG_DEBUG_RTC=n
-CONFIG_DEBUG_ANALOG=n
-CONFIG_DEBUG_PWM=n
-CONFIG_DEBUG_CAN=n
-CONFIG_DEBUG_I2C=n
-CONFIG_DEBUG_INPUT=n
-
-CONFIG_MSEC_PER_TICK=1
-CONFIG_HAVE_CXX=y
-CONFIG_HAVE_CXXINITIALIZE=y
-CONFIG_MM_REGIONS=1
-CONFIG_MM_SMALL=y
-CONFIG_ARCH_LOWPUTC=y
-CONFIG_RR_INTERVAL=0
-CONFIG_SCHED_INSTRUMENTATION=n
-CONFIG_TASK_NAME_SIZE=8
-CONFIG_START_YEAR=1970
-CONFIG_START_MONTH=1
-CONFIG_START_DAY=1
-CONFIG_GREGORIAN_TIME=n
-CONFIG_JULIAN_TIME=n
-# this eats ~1KiB of RAM ... work out why
-CONFIG_DEV_CONSOLE=y
-CONFIG_DEV_LOWCONSOLE=n
-CONFIG_MUTEX_TYPES=n
-CONFIG_PRIORITY_INHERITANCE=n
-CONFIG_SEM_PREALLOCHOLDERS=0
-CONFIG_SEM_NNESTPRIO=0
-CONFIG_FDCLONE_DISABLE=y
-CONFIG_FDCLONE_STDIO=y
-CONFIG_SDCLONE_DISABLE=y
-CONFIG_SCHED_WORKQUEUE=n
-CONFIG_SCHED_WORKPRIORITY=50
-CONFIG_SCHED_WORKPERIOD=50000
-CONFIG_SCHED_WORKSTACKSIZE=1024
-CONFIG_SIG_SIGWORK=4
-CONFIG_SCHED_WAITPID=n
-CONFIG_SCHED_ATEXIT=n
-
-#
-# The following can be used to disable categories of
-# APIs supported by the OS.  If the compiler supports
-# weak functions, then it should not be necessary to
-# disable functions unless you want to restrict usage
-# of those APIs.
-#
-# There are certain dependency relationships in these
-# features.
-#
-# o mq_notify logic depends on signals to awaken tasks
-#   waiting for queues to become full or empty.
-# o pthread_condtimedwait() depends on signals to wake
-#   up waiting tasks.
-#
-CONFIG_DISABLE_CLOCK=n
+
+#
+# RTOS Features
+#
+CONFIG_DISABLE_OS_API=y
 CONFIG_DISABLE_POSIX_TIMERS=y
 CONFIG_DISABLE_PTHREAD=y
 CONFIG_DISABLE_SIGNALS=y
 CONFIG_DISABLE_MQUEUE=y
-CONFIG_DISABLE_MOUNTPOINT=y
 CONFIG_DISABLE_ENVIRON=y
-CONFIG_DISABLE_POLL=y
 
 #
-# Misc libc settings
-#
-# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
-#   little smaller if we do not support fieldwidthes
-#
-CONFIG_NOPRINTF_FIELDWIDTH=n
-
-#
-# Allow for architecture optimized implementations
-#
-# The architecture can provide optimized versions of the
-# following to improve system performance
-#
-CONFIG_ARCH_MEMCPY=n
-CONFIG_ARCH_MEMCMP=n
-CONFIG_ARCH_MEMMOVE=n
-CONFIG_ARCH_MEMSET=n
-CONFIG_ARCH_STRCMP=n
-CONFIG_ARCH_STRCPY=n
-CONFIG_ARCH_STRNCPY=n
-CONFIG_ARCH_STRLEN=n
-CONFIG_ARCH_STRNLEN=n
-CONFIG_ARCH_BZERO=n
-
-#
-# Sizes of configurable things (0 disables)
-#
-# CONFIG_MAX_TASKS - The maximum number of simultaneously
-#   active tasks.  This value must be a power of two.
-# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
-#   of parameters that a task may receive (i.e., maxmum value
-#   of 'argc')
-# CONFIG_NPTHREAD_KEYS - The number of items of thread-
-#   specific data that can be retained
-# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
-#   descriptors (one for each open)
-# CONFIG_NFILE_STREAMS - The maximum number of streams that
-#   can be fopen'ed
-# CONFIG_NAME_MAX - The maximum size of a file name.
-# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
-#   on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
-# CONFIG_STDIO_LINEBUFFER - If standard C buffered I/O is enabled
-#   (CONFIG_STDIO_BUFFER_SIZE > 0), then this option may be added
-#   to force automatic, line-oriented flushing the output buffer
-#   for putc(), fputc(), putchar(), puts(), fputs(), printf(),
-#   fprintf(), and vfprintf().  When a newline is encountered in
-#   the output string, the output buffer will be flushed.  This
-#   (slightly) increases the NuttX footprint but supports the kind
-#   of behavior that people expect for printf().
-# CONFIG_NUNGET_CHARS - Number of characters that can be
-#   buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
-# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
-#   structures.  The system manages a pool of preallocated
-#   message structures to minimize dynamic allocations
-# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
-#   a fixed payload size given by this settin (does not include
-#   other message structure overhead.
-# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
-#   can be passed to a watchdog handler
-# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
-#   structures.  The system manages a pool of preallocated
-#   watchdog structures to minimize dynamic allocations
-# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
-#   timer structures.  The system manages a pool of preallocated
-#   timer structures to minimize dynamic allocations.  Set to
-#   zero for all dynamic allocations.
+# Clocks and Timers
 #
-CONFIG_MAX_TASKS=4
-CONFIG_MAX_TASK_ARGS=4
-CONFIG_NPTHREAD_KEYS=2
-CONFIG_NFILE_DESCRIPTORS=8
-CONFIG_NFILE_STREAMS=0
-CONFIG_NAME_MAX=12
-CONFIG_STDIO_BUFFER_SIZE=32
-CONFIG_STDIO_LINEBUFFER=n
-CONFIG_NUNGET_CHARS=2
-CONFIG_PREALLOC_MQ_MSGS=4
-CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_USEC_PER_TICK=1000
+# CONFIG_SYSTEM_TIME64 is not set
+# CONFIG_CLOCK_MONOTONIC is not set
+# CONFIG_JULIAN_TIME is not set
+CONFIG_START_YEAR=1970
+CONFIG_START_MONTH=1
+CONFIG_START_DAY=1
 CONFIG_MAX_WDOGPARMS=2
-CONFIG_PREALLOC_WDOGS=4
+CONFIG_PREALLOC_WDOGS=6
+CONFIG_WDOG_INTRESERVE=2
 CONFIG_PREALLOC_TIMERS=0
 
+#
+# Tasks and Scheduling
+#
+# CONFIG_INIT_NONE is not set
+CONFIG_INIT_ENTRYPOINT=y
+# CONFIG_INIT_FILEPATH is not set
+CONFIG_USER_ENTRYPOINT="user_start"
+CONFIG_RR_INTERVAL=0
+CONFIG_TASK_NAME_SIZE=8
+CONFIG_MAX_TASKS=4
+# CONFIG_SCHED_HAVE_PARENT is not set
+# CONFIG_SCHED_WAITPID is not set
 
 #
-# Settings for apps/nshlib
+# Performance Monitoring
+#
+# CONFIG_SCHED_CPULOAD is not set
+# CONFIG_SCHED_INSTRUMENTATION is not set
+
+#
+# Files and I/O
+#
+CONFIG_DEV_CONSOLE=y
+CONFIG_FDCLONE_DISABLE=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=0
+CONFIG_NAME_MAX=12
+# CONFIG_PRIORITY_INHERITANCE is not set
+
 #
-# CONFIG_NSH_BUILTIN_APPS - Support external registered,
-#   "named" applications that can be executed from the NSH
-#   command line (see apps/README.txt for more information).
-# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer
-# CONFIG_NSH_STRERROR - Use strerror(errno)
-# CONFIG_NSH_LINELEN - Maximum length of one command line
-# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
-# CONFIG_NSH_DISABLESCRIPT - Disable scripting support
-# CONFIG_NSH_DISABLEBG - Disable background commands
-# CONFIG_NSH_ROMFSETC - Use startup script in /etc
-# CONFIG_NSH_CONSOLE - Use serial console front end
-# CONFIG_NSH_TELNET - Use telnetd console front end
-# CONFIG_NSH_ARCHINIT - Platform provides architecture
-#   specific initialization (nsh_archinitialize()).
+# RTOS hooks
 #
+# CONFIG_BOARD_INITIALIZE is not set
+# CONFIG_SCHED_STARTHOOK is not set
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
 
-# Disable NSH completely
-CONFIG_NSH_CONSOLE=n
+#
+# Work Queue Support
+#
 
 #
 # Stack and heap information
 #
-# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP
-#   operation from FLASH but must copy initialized .data sections to RAM.
-#   (should also be =n for the STM3210E-EVAL which always runs from flash)
-# CONFIG_BOOT_COPYTORAM -  Some configurations boot in FLASH
-#   but copy themselves entirely into RAM for better performance.
-# CONFIG_CUSTOM_STACK - The up_ implementation will handle
-#   all stack operations outside of the nuttx model.
-# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
-# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
-#  This is the thread that (1) performs the inital boot of the system up
-#  to the point where user_start() is spawned, and (2) there after is the
-#  IDLE thread that executes only when there is no other thread ready to
-#  run.
-# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
-#  for the main user thread that begins at the user_start() entry point.
-# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
-# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
-# CONFIG_HEAP_BASE - The beginning of the heap
-# CONFIG_HEAP_SIZE - The size of the heap
-#
-CONFIG_BOOT_RUNFROMFLASH=n
-CONFIG_BOOT_COPYTORAM=n
-CONFIG_CUSTOM_STACK=n
-CONFIG_STACK_POINTER=
 CONFIG_IDLETHREAD_STACKSIZE=1024
 CONFIG_USERMAIN_STACKSIZE=1200
 CONFIG_PTHREAD_STACK_MIN=512
 CONFIG_PTHREAD_STACK_DEFAULT=1024
-CONFIG_HEAP_BASE=
-CONFIG_HEAP_SIZE=
+# CONFIG_LIB_SYSCALL is not set
+
+#
+# Device Drivers
+#
+CONFIG_DISABLE_POLL=y
+# CONFIG_DEV_NULL is not set
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+
+#
+# Buffering
+#
+# CONFIG_DRVR_WRITEBUFFER is not set
+# CONFIG_DRVR_READAHEAD is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
+# CONFIG_PWM is not set
+CONFIG_ARCH_HAVE_I2CRESET=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_I2S is not set
+# CONFIG_RTC is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_TIMER is not set
+# CONFIG_ANALOG is not set
+# CONFIG_AUDIO_DEVICES is not set
+# CONFIG_VIDEO_DEVICES is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
+# CONFIG_MMCSD is not set
+# CONFIG_MTD is not set
+# CONFIG_EEPROM is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+# CONFIG_DEV_LOWCONSOLE is not set
+# CONFIG_16550_UART is not set
+# CONFIG_ARCH_HAVE_UART is not set
+# CONFIG_ARCH_HAVE_UART0 is not set
+# CONFIG_ARCH_HAVE_UART1 is not set
+# CONFIG_ARCH_HAVE_UART2 is not set
+# CONFIG_ARCH_HAVE_UART3 is not set
+# CONFIG_ARCH_HAVE_UART4 is not set
+# CONFIG_ARCH_HAVE_UART5 is not set
+# CONFIG_ARCH_HAVE_UART6 is not set
+# CONFIG_ARCH_HAVE_UART7 is not set
+# CONFIG_ARCH_HAVE_UART8 is not set
+# CONFIG_ARCH_HAVE_SCI0 is not set
+# CONFIG_ARCH_HAVE_SCI1 is not set
+# CONFIG_ARCH_HAVE_USART0 is not set
+CONFIG_ARCH_HAVE_USART1=y
+CONFIG_ARCH_HAVE_USART2=y
+CONFIG_ARCH_HAVE_USART3=y
+# CONFIG_ARCH_HAVE_USART4 is not set
+# CONFIG_ARCH_HAVE_USART5 is not set
+# CONFIG_ARCH_HAVE_USART6 is not set
+# CONFIG_ARCH_HAVE_USART7 is not set
+# CONFIG_ARCH_HAVE_USART8 is not set
+# CONFIG_ARCH_HAVE_OTHER_UART is not set
+
+#
+# USART Configuration
+#
+CONFIG_USART1_ISUART=y
+CONFIG_USART2_ISUART=y
+CONFIG_USART3_ISUART=y
+CONFIG_MCU_SERIAL=y
+CONFIG_STANDARD_SERIAL=y
+# CONFIG_SERIAL_IFLOWCONTROL is not set
+# CONFIG_SERIAL_OFLOWCONTROL is not set
+CONFIG_ARCH_HAVE_SERIAL_TERMIOS=y
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_USART1_SERIAL_CONSOLE=y
+# CONFIG_USART2_SERIAL_CONSOLE is not set
+# CONFIG_USART3_SERIAL_CONSOLE is not set
+# CONFIG_OTHER_SERIAL_CONSOLE is not set
+# CONFIG_NO_SERIAL_CONSOLE is not set
+
+#
+# USART1 Configuration
+#
+CONFIG_USART1_RXBUFSIZE=64
+CONFIG_USART1_TXBUFSIZE=64
+CONFIG_USART1_BAUD=115200
+CONFIG_USART1_BITS=8
+CONFIG_USART1_PARITY=0
+CONFIG_USART1_2STOP=0
+# CONFIG_USART1_IFLOWCONTROL is not set
+# CONFIG_USART1_OFLOWCONTROL is not set
+
+#
+# USART2 Configuration
+#
+CONFIG_USART2_RXBUFSIZE=64
+CONFIG_USART2_TXBUFSIZE=64
+CONFIG_USART2_BAUD=115200
+CONFIG_USART2_BITS=8
+CONFIG_USART2_PARITY=0
+CONFIG_USART2_2STOP=0
+# CONFIG_USART2_IFLOWCONTROL is not set
+# CONFIG_USART2_OFLOWCONTROL is not set
+
+#
+# USART3 Configuration
+#
+CONFIG_USART3_RXBUFSIZE=64
+CONFIG_USART3_TXBUFSIZE=64
+CONFIG_USART3_BAUD=115200
+CONFIG_USART3_BITS=8
+CONFIG_USART3_PARITY=0
+CONFIG_USART3_2STOP=0
+# CONFIG_USART3_IFLOWCONTROL is not set
+# CONFIG_USART3_OFLOWCONTROL is not set
+# CONFIG_USBDEV is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
+
+#
+# System Logging Device Options
+#
+
+#
+# System Logging
+#
+# CONFIG_RAMLOG is not set
+
+#
+# Networking Support
+#
+# CONFIG_ARCH_HAVE_NET is not set
+# CONFIG_ARCH_HAVE_PHY is not set
+# CONFIG_NET is not set
+
+#
+# Crypto API
+#
+# CONFIG_CRYPTO is not set
+
+#
+# File Systems
+#
+
+#
+# File system configuration
+#
+CONFIG_DISABLE_MOUNTPOINT=y
+CONFIG_DISABLE_PSEUDOFS_OPERATIONS=y
+# CONFIG_FS_READABLE is not set
+# CONFIG_FS_WRITABLE is not set
+# CONFIG_FS_NAMED_SEMAPHORES is not set
+# CONFIG_FS_RAMMAP is not set
+# CONFIG_FS_PROCFS is not set
+
+#
+# System Logging
+#
+# CONFIG_SYSLOG is not set
+# CONFIG_SYSLOG_TIMESTAMP is not set
+
+#
+# Graphics Support
+#
+# CONFIG_NX is not set
+
+#
+# Memory Management
+#
+CONFIG_MM_SMALL=y
+CONFIG_MM_REGIONS=1
+# CONFIG_ARCH_HAVE_HEAP2 is not set
+# CONFIG_GRAN is not set
+
+#
+# Audio Support
+#
+# CONFIG_AUDIO is not set
+
+#
+# Binary Loader
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+# CONFIG_BUILTIN is not set
+# CONFIG_PIC is not set
+# CONFIG_SYMTAB_ORDEREDBYNAME is not set
+
+#
+# Library Routines
+#
+
+#
+# Standard C Library Options
+#
+CONFIG_STDIO_BUFFER_SIZE=32
+# CONFIG_STDIO_LINEBUFFER is not set
+CONFIG_NUNGET_CHARS=2
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+# CONFIG_LIBC_IOCTL_VARIADIC is not set
+CONFIG_LIB_RAND_ORDER=1
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_EXECFUNCS is not set
+CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
+CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=1024
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+
+#
+# Non-standard Library Support
+#
+# CONFIG_LIB_KBDCODEC is not set
+# CONFIG_LIB_SLCDCODEC is not set
+
+#
+# Basic CXX Support
+#
+CONFIG_C99_BOOL8=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+# CONFIG_CXX_NEWLONG is not set
+
+#
+# uClibc++ Standard C++ Library
+#
+# CONFIG_UCLIBCXX is not set
+
+#
+# Application Configuration
+#
+
+#
+# Built-In Applications
+#
+
+#
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_CONFIGDATA is not set
+# CONFIG_EXAMPLES_CPUHOG is not set
+# CONFIG_EXAMPLES_CXXTEST is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_NRF24L01TERM is not set
+# CONFIG_EXAMPLES_NSH is not set
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXTERM is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+# CONFIG_EXAMPLES_OSTEST is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POLL is not set
+# CONFIG_EXAMPLES_POSIXSPAWN is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERIALBLASTER is not set
+# CONFIG_EXAMPLES_SERIALRX is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_SLCD is not set
+# CONFIG_EXAMPLES_SMART is not set
+# CONFIG_EXAMPLES_TCPECHO is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_WEBSERVER is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_TIFF is not set
+# CONFIG_GRAPHICS_TRAVELER is not set
+
+#
+# Interpreters
+#
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+# CONFIG_NETUTILS_SMTP is not set
+# CONFIG_NETUTILS_TFTPC is not set
+# CONFIG_NETUTILS_THTTPD is not set
+# CONFIG_NETUTILS_NETLIB is not set
+# CONFIG_NETUTILS_WEBCLIENT is not set
+
+#
+# FreeModBus
+#
+# CONFIG_MODBUS is not set
 
 #
 # NSH Library
 #
 # CONFIG_NSH_LIBRARY is not set
-# CONFIG_NSH_BUILTIN_APPS is not set
+
+#
+# NxWidgets/NxWM
+#
+
+#
+# Platform-specific Support
+#
+# CONFIG_PLATFORM_CONFIGDATA is not set
+
+#
+# System Libraries and NSH Add-Ons
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# EMACS-like Command Line Editor
+#
+# CONFIG_SYSTEM_CLE is not set
+
+#
+# CU Minimal Terminal
+#
+# CONFIG_SYSTEM_CUTERM is not set
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# FLASH Erase-all Command
+#
+
+#
+# Intel HEX to binary conversion
+#
+# CONFIG_SYSTEM_HEX2BIN is not set
+
+#
+# I2C tool
+#
+
+#
+# INI File Parser
+#
+# CONFIG_SYSTEM_INIFILE is not set
+
+#
+# NxPlayer media player library / command Line
+#
+
+#
+# RAM test
+#
+# CONFIG_SYSTEM_RAMTEST is not set
+
+#
+# readline()
+#
+# CONFIG_SYSTEM_READLINE is not set
+
+#
+# P-Code Support
+#
+
+#
+# PHY Tool
+#
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sudoku
+#
+# CONFIG_SYSTEM_SUDOKU is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
+
+#
+# VI Work-Alike Editor
+#
+# CONFIG_SYSTEM_VI is not set
+
+#
+# Stack Monitor
+#
+
+#
+# USB CDC/ACM Device Commands
+#
+
+#
+# USB Composite Device Commands
+#
+
+#
+# USB Mass Storage Device Commands
+#
+
+#
+# USB Monitor
+#
+
+#
+# Zmodem Commands
+#
+# CONFIG_SYSTEM_ZMODEM is not set
diff --git a/nuttx-configs/px4io-v2/nsh/defconfig b/nuttx-configs/px4io-v2/nsh/defconfig
index 1bfea7b93..00cf17427 100755
--- a/nuttx-configs/px4io-v2/nsh/defconfig
+++ b/nuttx-configs/px4io-v2/nsh/defconfig
@@ -1,558 +1,978 @@
-############################################################################
-# configs/px4io/nsh/defconfig
-#
-#   Copyright (C) 2012 PX4 Development Team. All rights reserved.
-#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-#
-# architecture selection
-#
-# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
-#   processor architecture.
-# CONFIG_ARCH_family - for use in C code.  This identifies the
-#   particular chip family that the architecture is implemented
-#   in.
-# CONFIG_ARCH_architecture - for use in C code.  This identifies the
-#   specific architecture within the chip family.
-# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
-# CONFIG_ARCH_CHIP_name - For use in C code
-# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
-#   the board that supports the particular chip or SoC.
-# CONFIG_ARCH_BOARD_name - for use in C code
-# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
-# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
-# CONFIG_RAM_SIZE - Describes the installed DRAM.
-# CONFIG_RAM_START - The start address of DRAM (physical)
-# CONFIG_ARCH_IRQPRIO - The ST32F100CB supports interrupt prioritization
-# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
-#   stack. If defined, this symbol is the size of the interrupt
-#   stack in bytes.  If not defined, the user task stacks will be
-#   used during interrupt handling.
-# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
-# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader.
-# CONFIG_ARCH_LEDS -  Use LEDs to show state. Unique to board architecture.
-# CONFIG_ARCH_BUTTONS -  Enable support for buttons. Unique to board architecture.
-# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
-#   cause a 100 second delay during boot-up.  This 100 second delay
-#   serves no purpose other than it allows you to calibrate
-#   CONFIG_BOARD_LOOPSPERMSEC.  You simply use a stop watch to measure
-#   the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
-#   the delay actually is 100 seconds.
-# CONFIG_ARCH_DMA - Support DMA initialization
 #
-CONFIG_ARCH="arm"
-CONFIG_ARCH_ARM=y
-CONFIG_ARCH_CORTEXM3=y
-CONFIG_ARCH_CHIP="stm32"
-CONFIG_ARCH_CHIP_STM32F100C8=y
-CONFIG_ARCH_BOARD="px4io-v2"
-CONFIG_ARCH_BOARD_PX4IO_V2=y
-CONFIG_BOARD_LOOPSPERMSEC=2000
-CONFIG_RAM_SIZE=0x00002000
-CONFIG_RAM_START=0x20000000
-CONFIG_ARCH_INTERRUPTSTACK=n
-CONFIG_ARCH_STACKDUMP=y
-CONFIG_ARCH_BOOTLOADER=n
-CONFIG_ARCH_LEDS=n
-CONFIG_ARCH_BUTTONS=n
-CONFIG_ARCH_CALIBRATION=n
-CONFIG_ARCH_DMA=y
-CONFIG_ARCH_MATH_H=y
-
-CONFIG_ARMV7M_CMNVECTOR=y
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
 
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_DEFAULT_SMALL is not set
 CONFIG_HOST_LINUX=y
+# CONFIG_HOST_OSX is not set
+# CONFIG_HOST_WINDOWS is not set
+# CONFIG_HOST_OTHER is not set
 
 #
-# JTAG Enable settings (by default JTAG-DP and SW-DP are disabled):
+# Build Configuration
+#
+CONFIG_APPS_DIR="../apps"
+CONFIG_BUILD_FLAT=y
+# CONFIG_BUILD_2PASS is not set
+
 #
-#   CONFIG_STM32_DFU - Use the DFU bootloader, not JTAG
+# Binary Output Formats
 #
-# JTAG Enable options:
+# CONFIG_RRLOAD_BINARY is not set
+# CONFIG_INTELHEX_BINARY is not set
+# CONFIG_MOTOROLA_SREC is not set
+CONFIG_RAW_BINARY=y
+# CONFIG_UBOOT_UIMAGE is not set
+
 #
-#   CONFIG_STM32_JTAG_FULL_ENABLE - Enables full SWJ (JTAG-DP + SW-DP)
-#   CONFIG_STM32_JTAG_NOJNTRST_ENABLE - Enables full SWJ (JTAG-DP + SW-DP)
-#     but without JNTRST.
-#   CONFIG_STM32_JTAG_SW_ENABLE - Set JTAG-DP disabled and SW-DP enabled
+# Customize Header Files
 #
-CONFIG_STM32_DFU=n
-CONFIG_STM32_JTAG_FULL_ENABLE=n
-CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n
-CONFIG_STM32_JTAG_SW_ENABLE=y
+# CONFIG_ARCH_STDINT_H is not set
+# CONFIG_ARCH_STDBOOL_H is not set
+CONFIG_ARCH_MATH_H=y
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
 
 #
-# Individual subsystems can be enabled:
+# Debug Options
 #
-# AHB: 
+# CONFIG_DEBUG is not set
+CONFIG_ARCH_HAVE_STACKCHECK=y
+CONFIG_ARCH_HAVE_HEAPCHECK=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_ARCH_HAVE_CUSTOMOPT=y
+# CONFIG_DEBUG_NOOPT is not set
+# CONFIG_DEBUG_CUSTOMOPT is not set
+CONFIG_DEBUG_FULLOPT=y
+
+#
+# System Type
+#
+CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
+
+#
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_A1X is not set
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_EFM32 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+# CONFIG_ARCH_CHIP_KINETIS is not set
+# CONFIG_ARCH_CHIP_KL is not set
+# CONFIG_ARCH_CHIP_LM is not set
+# CONFIG_ARCH_CHIP_TIVA is not set
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_NUC1XX is not set
+# CONFIG_ARCH_CHIP_SAMA5 is not set
+# CONFIG_ARCH_CHIP_SAMD is not set
+# CONFIG_ARCH_CHIP_SAM34 is not set
+CONFIG_ARCH_CHIP_STM32=y
+# CONFIG_ARCH_CHIP_STR71X is not set
+# CONFIG_ARCH_ARM7TDMI is not set
+# CONFIG_ARCH_ARM926EJS is not set
+# CONFIG_ARCH_ARM920T is not set
+# CONFIG_ARCH_CORTEXM0 is not set
+CONFIG_ARCH_CORTEXM3=y
+# CONFIG_ARCH_CORTEXM4 is not set
+# CONFIG_ARCH_CORTEXA5 is not set
+# CONFIG_ARCH_CORTEXA8 is not set
+CONFIG_ARCH_FAMILY="armv7-m"
+CONFIG_ARCH_CHIP="stm32"
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_ARCH_HAVE_CMNVECTOR=y
+CONFIG_ARMV7M_CMNVECTOR=y
+# CONFIG_ARCH_HAVE_FPU is not set
+# CONFIG_ARMV7M_MPU is not set
+
+#
+# ARMV7M Configuration Options
+#
+# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
+CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y
+# CONFIG_ARMV7M_STACKCHECK is not set
+# CONFIG_ARMV7M_ITMSYSLOG is not set
+
+#
+# STM32 Configuration Options
+#
+# CONFIG_ARCH_CHIP_STM32L151C6 is not set
+# CONFIG_ARCH_CHIP_STM32L151C8 is not set
+# CONFIG_ARCH_CHIP_STM32L151CB is not set
+# CONFIG_ARCH_CHIP_STM32L151R6 is not set
+# CONFIG_ARCH_CHIP_STM32L151R8 is not set
+# CONFIG_ARCH_CHIP_STM32L151RB is not set
+# CONFIG_ARCH_CHIP_STM32L151V6 is not set
+# CONFIG_ARCH_CHIP_STM32L151V8 is not set
+# CONFIG_ARCH_CHIP_STM32L151VB is not set
+# CONFIG_ARCH_CHIP_STM32L152C6 is not set
+# CONFIG_ARCH_CHIP_STM32L152C8 is not set
+# CONFIG_ARCH_CHIP_STM32L152CB is not set
+# CONFIG_ARCH_CHIP_STM32L152R6 is not set
+# CONFIG_ARCH_CHIP_STM32L152R8 is not set
+# CONFIG_ARCH_CHIP_STM32L152RB is not set
+# CONFIG_ARCH_CHIP_STM32L152V6 is not set
+# CONFIG_ARCH_CHIP_STM32L152V8 is not set
+# CONFIG_ARCH_CHIP_STM32L152VB is not set
+# CONFIG_ARCH_CHIP_STM32L162ZD is not set
+CONFIG_ARCH_CHIP_STM32F100C8=y
+# CONFIG_ARCH_CHIP_STM32F100CB is not set
+# CONFIG_ARCH_CHIP_STM32F100R8 is not set
+# CONFIG_ARCH_CHIP_STM32F100RB is not set
+# CONFIG_ARCH_CHIP_STM32F100RC is not set
+# CONFIG_ARCH_CHIP_STM32F100RD is not set
+# CONFIG_ARCH_CHIP_STM32F100RE is not set
+# CONFIG_ARCH_CHIP_STM32F100V8 is not set
+# CONFIG_ARCH_CHIP_STM32F100VB is not set
+# CONFIG_ARCH_CHIP_STM32F100VC is not set
+# CONFIG_ARCH_CHIP_STM32F100VD is not set
+# CONFIG_ARCH_CHIP_STM32F100VE is not set
+# CONFIG_ARCH_CHIP_STM32F102CB is not set
+# CONFIG_ARCH_CHIP_STM32F103T8 is not set
+# CONFIG_ARCH_CHIP_STM32F103TB is not set
+# CONFIG_ARCH_CHIP_STM32F103C4 is not set
+# CONFIG_ARCH_CHIP_STM32F103C8 is not set
+# CONFIG_ARCH_CHIP_STM32F103CB is not set
+# CONFIG_ARCH_CHIP_STM32F103R8 is not set
+# CONFIG_ARCH_CHIP_STM32F103RB is not set
+# CONFIG_ARCH_CHIP_STM32F103RC is not set
+# CONFIG_ARCH_CHIP_STM32F103RD is not set
+# CONFIG_ARCH_CHIP_STM32F103RE is not set
+# CONFIG_ARCH_CHIP_STM32F103RG is not set
+# CONFIG_ARCH_CHIP_STM32F103V8 is not set
+# CONFIG_ARCH_CHIP_STM32F103VB is not set
+# CONFIG_ARCH_CHIP_STM32F103VC is not set
+# CONFIG_ARCH_CHIP_STM32F103VE is not set
+# CONFIG_ARCH_CHIP_STM32F103ZE is not set
+# CONFIG_ARCH_CHIP_STM32F105VB is not set
+# CONFIG_ARCH_CHIP_STM32F107VC is not set
+# CONFIG_ARCH_CHIP_STM32F207IG is not set
+# CONFIG_ARCH_CHIP_STM32F207ZE is not set
+# CONFIG_ARCH_CHIP_STM32F302CB is not set
+# CONFIG_ARCH_CHIP_STM32F302CC is not set
+# CONFIG_ARCH_CHIP_STM32F302RB is not set
+# CONFIG_ARCH_CHIP_STM32F302RC is not set
+# CONFIG_ARCH_CHIP_STM32F302VB is not set
+# CONFIG_ARCH_CHIP_STM32F302VC is not set
+# CONFIG_ARCH_CHIP_STM32F303CB is not set
+# CONFIG_ARCH_CHIP_STM32F303CC is not set
+# CONFIG_ARCH_CHIP_STM32F303RB is not set
+# CONFIG_ARCH_CHIP_STM32F303RC is not set
+# CONFIG_ARCH_CHIP_STM32F303VB is not set
+# CONFIG_ARCH_CHIP_STM32F303VC is not set
+# CONFIG_ARCH_CHIP_STM32F401RE is not set
+# CONFIG_ARCH_CHIP_STM32F411RE is not set
+# CONFIG_ARCH_CHIP_STM32F405RG is not set
+# CONFIG_ARCH_CHIP_STM32F405VG is not set
+# CONFIG_ARCH_CHIP_STM32F405ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407VE is not set
+# CONFIG_ARCH_CHIP_STM32F407VG is not set
+# CONFIG_ARCH_CHIP_STM32F407ZE is not set
+# CONFIG_ARCH_CHIP_STM32F407ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407IE is not set
+# CONFIG_ARCH_CHIP_STM32F407IG is not set
+# CONFIG_ARCH_CHIP_STM32F427V is not set
+# CONFIG_ARCH_CHIP_STM32F427Z is not set
+# CONFIG_ARCH_CHIP_STM32F427I is not set
+# CONFIG_ARCH_CHIP_STM32F429V is not set
+# CONFIG_ARCH_CHIP_STM32F429Z is not set
+# CONFIG_ARCH_CHIP_STM32F429I is not set
+# CONFIG_ARCH_CHIP_STM32F429B is not set
+# CONFIG_ARCH_CHIP_STM32F429N is not set
+# CONFIG_STM32_STM32L15XX is not set
+# CONFIG_STM32_ENERGYLITE is not set
+CONFIG_STM32_STM32F10XX=y
+CONFIG_STM32_VALUELINE=y
+# CONFIG_STM32_CONNECTIVITYLINE is not set
+# CONFIG_STM32_PERFORMANCELINE is not set
+# CONFIG_STM32_USBACCESSLINE is not set
+# CONFIG_STM32_HIGHDENSITY is not set
+# CONFIG_STM32_MEDIUMDENSITY is not set
+# CONFIG_STM32_LOWDENSITY is not set
+# CONFIG_STM32_STM32F20XX is not set
+# CONFIG_STM32_STM32F207 is not set
+# CONFIG_STM32_STM32F30XX is not set
+# CONFIG_STM32_STM32F40XX is not set
+# CONFIG_STM32_STM32F401 is not set
+# CONFIG_STM32_STM32F411 is not set
+# CONFIG_STM32_STM32F405 is not set
+# CONFIG_STM32_STM32F407 is not set
+# CONFIG_STM32_STM32F427 is not set
+# CONFIG_STM32_STM32F429 is not set
+
+#
+# STM32 Peripheral Support
+#
+# CONFIG_STM32_HAVE_CCM is not set
+# CONFIG_STM32_HAVE_USBDEV is not set
+# CONFIG_STM32_HAVE_OTGFS is not set
+# CONFIG_STM32_HAVE_FSMC is not set
+CONFIG_STM32_HAVE_USART3=y
+CONFIG_STM32_HAVE_UART4=y
+CONFIG_STM32_HAVE_UART5=y
+# CONFIG_STM32_HAVE_USART6 is not set
+# CONFIG_STM32_HAVE_UART7 is not set
+# CONFIG_STM32_HAVE_UART8 is not set
+CONFIG_STM32_HAVE_TIM1=y
+CONFIG_STM32_HAVE_TIM5=y
+CONFIG_STM32_HAVE_TIM6=y
+CONFIG_STM32_HAVE_TIM7=y
+# CONFIG_STM32_HAVE_TIM8 is not set
+# CONFIG_STM32_HAVE_TIM9 is not set
+# CONFIG_STM32_HAVE_TIM10 is not set
+# CONFIG_STM32_HAVE_TIM11 is not set
+CONFIG_STM32_HAVE_TIM12=y
+CONFIG_STM32_HAVE_TIM13=y
+CONFIG_STM32_HAVE_TIM14=y
+CONFIG_STM32_HAVE_TIM15=y
+CONFIG_STM32_HAVE_TIM16=y
+CONFIG_STM32_HAVE_TIM17=y
+CONFIG_STM32_HAVE_ADC2=y
+# CONFIG_STM32_HAVE_ADC3 is not set
+# CONFIG_STM32_HAVE_ADC4 is not set
+# CONFIG_STM32_HAVE_CAN1 is not set
+# CONFIG_STM32_HAVE_CAN2 is not set
+# CONFIG_STM32_HAVE_RNG is not set
+# CONFIG_STM32_HAVE_ETHMAC is not set
+# CONFIG_STM32_HAVE_SPI2 is not set
+# CONFIG_STM32_HAVE_SPI3 is not set
+# CONFIG_STM32_HAVE_SPI4 is not set
+# CONFIG_STM32_HAVE_SPI5 is not set
+CONFIG_STM32_ADC1=y
+# CONFIG_STM32_ADC2 is not set
+# CONFIG_STM32_BKP is not set
+# CONFIG_STM32_CEC is not set
+# CONFIG_STM32_CRC is not set
 CONFIG_STM32_DMA1=y
-CONFIG_STM32_DMA2=n
-CONFIG_STM32_CRC=n
-# APB1:
-# Timers 2,3 and 4 are owned by the PWM driver
-CONFIG_STM32_TIM2=n
-CONFIG_STM32_TIM3=n
-CONFIG_STM32_TIM4=n
-CONFIG_STM32_TIM5=n
-CONFIG_STM32_TIM6=n
-CONFIG_STM32_TIM7=n
-CONFIG_STM32_WWDG=n
-CONFIG_STM32_SPI2=n
+# CONFIG_STM32_DAC1 is not set
+# CONFIG_STM32_DAC2 is not set
+CONFIG_STM32_I2C1=y
+# CONFIG_STM32_I2C2 is not set
+# CONFIG_STM32_PWR is not set
+# CONFIG_STM32_SPI1 is not set
+# CONFIG_STM32_TIM1 is not set
+# CONFIG_STM32_TIM2 is not set
+# CONFIG_STM32_TIM3 is not set
+# CONFIG_STM32_TIM4 is not set
+# CONFIG_STM32_TIM5 is not set
+# CONFIG_STM32_TIM6 is not set
+# CONFIG_STM32_TIM7 is not set
+# CONFIG_STM32_TIM12 is not set
+# CONFIG_STM32_TIM13 is not set
+# CONFIG_STM32_TIM14 is not set
+# CONFIG_STM32_TIM15 is not set
+# CONFIG_STM32_TIM16 is not set
+# CONFIG_STM32_TIM17 is not set
+CONFIG_STM32_USART1=y
 CONFIG_STM32_USART2=y
 CONFIG_STM32_USART3=y
-CONFIG_STM32_I2C1=n
-CONFIG_STM32_I2C2=n
-CONFIG_STM32_BKP=n
-CONFIG_STM32_PWR=n
-CONFIG_STM32_DAC=n
-# APB2:
-# We use our own ADC driver, but leave this on for clocking purposes.
-CONFIG_STM32_ADC1=y
-CONFIG_STM32_ADC2=n
-# TIM1 is owned by the HRT
-CONFIG_STM32_TIM1=n
-CONFIG_STM32_SPI1=n
-CONFIG_STM32_TIM8=n
-CONFIG_STM32_USART1=y
-CONFIG_STM32_ADC3=n
+# CONFIG_STM32_UART4 is not set
+# CONFIG_STM32_UART5 is not set
+# CONFIG_STM32_IWDG is not set
+# CONFIG_STM32_WWDG is not set
+CONFIG_STM32_ADC=y
+CONFIG_STM32_I2C=y
 
+#
+# Alternate Pin Mapping
+#
+# CONFIG_STM32_I2C1_REMAP is not set
+# CONFIG_STM32_USART1_REMAP is not set
+# CONFIG_STM32_USART2_REMAP is not set
+CONFIG_STM32_USART3_NO_REMAP=y
+# CONFIG_STM32_USART3_FULL_REMAP is not set
+# CONFIG_STM32_USART3_PARTIAL_REMAP is not set
+# CONFIG_STM32_JTAG_DISABLE is not set
+# CONFIG_STM32_JTAG_FULL_ENABLE is not set
+# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
+CONFIG_STM32_JTAG_SW_ENABLE=y
+CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
+# CONFIG_STM32_FORCEPOWER is not set
+# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
+# CONFIG_STM32_DMACAPABLE is not set
+CONFIG_STM32_USART=y
 
 #
-# STM32F100 specific serial device driver settings
+# U[S]ART Configuration
 #
-# CONFIG_USARTn_SERIAL_CONSOLE - selects the USARTn for the
-#   console and ttys0 (default is the USART1).
-# CONFIG_USARTn_RXBUFSIZE - Characters are buffered as received.
-#   This specific the size of the receive buffer
-# CONFIG_USARTn_TXBUFSIZE - Characters are buffered before
-#   being sent.  This specific the size of the transmit buffer
-# CONFIG_USARTn_BAUD - The configure BAUD of the UART.  Must be
-# CONFIG_USARTn_BITS - The number of bits.  Must be either 7 or 8.
-# CONFIG_USARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
-# CONFIG_USARTn_2STOP - Two stop bits
+# CONFIG_USART1_RS485 is not set
+CONFIG_USART1_RXDMA=y
+# CONFIG_USART2_RS485 is not set
+# CONFIG_USART2_RXDMA is not set
+# CONFIG_USART3_RS485 is not set
+CONFIG_USART3_RXDMA=y
+# CONFIG_SERIAL_DISABLE_REORDERING is not set
+# CONFIG_STM32_FLOWCONTROL_BROKEN is not set
+CONFIG_STM32_USART_SINGLEWIRE=y
+
 #
-CONFIG_SERIAL_TERMIOS=y
-CONFIG_STANDARD_SERIAL=y
+# I2C Configuration
+#
+# CONFIG_STM32_I2C_ALT is not set
+# CONFIG_STM32_I2C_DYNTIMEO is not set
+CONFIG_STM32_I2CTIMEOSEC=0
+CONFIG_STM32_I2CTIMEOMS=1
+CONFIG_STM32_I2CTIMEOTICKS=1
+# CONFIG_STM32_I2C_DUTY16_9 is not set
 
-CONFIG_USART1_SERIAL_CONSOLE=y
-CONFIG_USART2_SERIAL_CONSOLE=n
-CONFIG_USART3_SERIAL_CONSOLE=n
+#
+# USB FS Host Configuration
+#
 
-CONFIG_USART1_TXBUFSIZE=64
-CONFIG_USART2_TXBUFSIZE=64
-CONFIG_USART3_TXBUFSIZE=64
+#
+# USB HS Host Configuration
+#
 
-CONFIG_USART1_RXBUFSIZE=64
-CONFIG_USART2_RXBUFSIZE=64
-CONFIG_USART3_RXBUFSIZE=64
+#
+# USB Host Debug Configuration
+#
 
-CONFIG_USART1_BAUD=115200
-CONFIG_USART2_BAUD=115200
-CONFIG_USART3_BAUD=115200
+#
+# USB Device Configuration
+#
 
-CONFIG_USART1_BITS=8
-CONFIG_USART2_BITS=8
-CONFIG_USART3_BITS=8
+#
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_VECNOTIRQ is not set
+CONFIG_ARCH_DMA=y
+CONFIG_ARCH_HAVE_IRQPRIO=y
+# CONFIG_ARCH_L2CACHE is not set
+# CONFIG_ARCH_HAVE_COHERENT_DCACHE is not set
+# CONFIG_ARCH_HAVE_ADDRENV is not set
+# CONFIG_ARCH_NEED_ADDRENV_MAPPING is not set
+CONFIG_ARCH_HAVE_VFORK=y
+# CONFIG_ARCH_HAVE_MMU is not set
+CONFIG_ARCH_HAVE_MPU=y
+# CONFIG_ARCH_NAND_HWECC is not set
+# CONFIG_ARCH_HAVE_EXTCLK is not set
+# CONFIG_ARCH_USE_MPU is not set
+# CONFIG_ARCH_IRQPRIO is not set
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
+# CONFIG_ARCH_IDLE_CUSTOM is not set
+# CONFIG_ARCH_HAVE_RAMFUNCS is not set
+CONFIG_ARCH_HAVE_RAMVECTORS=y
+# CONFIG_ARCH_RAMVECTORS is not set
 
-CONFIG_USART1_PARITY=0
-CONFIG_USART2_PARITY=0
-CONFIG_USART3_PARITY=0
+#
+# Board Settings
+#
+CONFIG_BOARD_LOOPSPERMSEC=2000
+# CONFIG_ARCH_CALIBRATION is not set
 
-CONFIG_USART1_2STOP=0
-CONFIG_USART2_2STOP=0
-CONFIG_USART3_2STOP=0
+#
+# Interrupt options
+#
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=0
+CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y
+# CONFIG_ARCH_HIPRI_INTERRUPT is not set
 
-CONFIG_USART1_RXDMA=y
-SERIAL_HAVE_CONSOLE_DMA=y
-# Conflicts with I2C1 DMA
-CONFIG_USART2_RXDMA=n
-CONFIG_USART3_RXDMA=y
+#
+# Boot options
+#
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
 
-# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
-# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
-CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y
-# CONFIG_ARMV7M_ITMSYSLOG is not set
+#
+# Boot Memory Configuration
+#
+CONFIG_RAM_START=0x20000000
+CONFIG_RAM_SIZE=8192
+# CONFIG_ARCH_HAVE_SDRAM is not set
 
 #
-# PX4IO specific driver settings
-#
-# CONFIG_HRT_TIMER
-#   Enables the high-resolution timer.  The board definition must
-#   set HRT_TIMER and HRT_TIMER_CHANNEL to the timer and capture/
-#   compare channels to be used.
-# CONFIG_HRT_PPM
-#   Enables R/C PPM input using the HRT.  The board definition must
-#   set HRT_PPM_CHANNEL to the timer capture/compare channel to be
-#   used, and define GPIO_PPM_IN to configure the appropriate timer
-#   GPIO.
-# CONFIG_PWM_SERVO
-#   Enables the PWM servo driver.  The driver configuration must be
-#   supplied by the board support at initialisation time.
-#   Note that USART2 must be disabled on the PX4 board for this to
-#   be available.
-#
-#
-CONFIG_HRT_TIMER=y
-CONFIG_HRT_PPM=y
-
-#
-# General build options
-#
-# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
-#   BSPs from www.ridgerun.com using the tools/mkimage.sh script
-# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
-#   used with many different loaders using the GNU objcopy program
-#   Should not be selected if you are not using the GNU toolchain.
-# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format
-#   used with many different loaders using the GNU objcopy program
-#   Should not be selected if you are not using the GNU toolchain.
-# CONFIG_RAW_BINARY - make a raw binary format file used with many
-#   different loaders using the GNU objcopy program.  This option
-#   should not be selected if you are not using the GNU toolchain.
-# CONFIG_HAVE_LIBM - toolchain supports libm.a
-#
-CONFIG_RRLOAD_BINARY=n
-CONFIG_INTELHEX_BINARY=n
-CONFIG_MOTOROLA_SREC=n
-CONFIG_RAW_BINARY=y
-CONFIG_HAVE_LIBM=n
-
-#
-# General OS setup
-#
-# CONFIG_APPS_DIR - Identifies the relative path to the directory
-#   that builds the application to link with NuttX.  Default: ../apps
-# CONFIG_DEBUG - enables built-in debug options
-# CONFIG_DEBUG_VERBOSE - enables verbose debug output
-# CONFIG_DEBUG_SYMBOLS - build without optimization and with
-#   debug symbols (needed for use with a debugger).
-# CONFIG_HAVE_CXX - Enable support for C++
-# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
-#   for initialization of static C++ instances for this architecture
-#   and for the selected toolchain (via up_cxxinitialize()).
-# CONFIG_MM_REGIONS - If the architecture includes multiple
-#   regions of memory to allocate from, this specifies the
-#   number of memory regions that the memory manager must
-#   handle and enables the API mm_addregion(start, end);
-# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
-#   time console output
-# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
-#   or MSEC_PER_TICK=10.  This setting may be defined to
-#   inform NuttX that the processor hardware is providing
-#   system timer interrupts at some interrupt interval other
-#   than 10 msec.
-# CONFIG_RR_INTERVAL - The round robin timeslice will be set
-#   this number of milliseconds;  Round robin scheduling can
-#   be disabled by setting this value to zero.
-# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in 
-#   scheduler to monitor system performance
-# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
-#   task name to save in the TCB.  Useful if scheduler
-#   instrumentation is selected.  Set to zero to disable.
-# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
-#   Used to initialize the internal time logic.
-# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions.
-#   You would only need this if you are concerned about accurate
-#   time conversions in the past or in the distant future.
-# CONFIG_JULIAN_TIME - Enables Julian time conversions. You
-#   would only need this if you are concerned about accurate
-#   time conversion in the distand past.  You must also define
-#   CONFIG_GREGORIAN_TIME in order to use Julian time.
-# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
-#   provides /dev/console.  Enables stdout, stderr, stdin.
-# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
-#   driver (minimul support)
-# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
-#   errorcheck mutexes. Enables pthread_mutexattr_settype().
-# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
-#   inheritance on mutexes and semaphores. 
-# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
-#   inheritance is enabled.  It defines the maximum number of
-#   different threads (minus one) that can take counts on a
-#   semaphore with priority inheritance support.  This may be 
-#   set to zero if priority inheritance is disabled OR if you
-#   are only using semaphores as mutexes (only one holder) OR
-#   if no more than two threads participate using a counting
-#   semaphore.
-# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
-#   then this setting is the maximum number of higher priority
-#   threads (minus 1) than can be waiting for another thread
-#   to release a count on a semaphore.  This value may be set
-#   to zero if no more than one thread is expected to wait for
-#   a semaphore.
-# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
-#   by task_create() when a new task is started.  If set, all
-#   files/drivers will appear to be closed in the new task.
-# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
-#   three file descriptors (stdin, stdout, stderr) by task_create()
-#   when a new task is started. If set, all files/drivers will
-#   appear to be closed in the new task except for stdin, stdout,
-#   and stderr.
-# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
-#   desciptors by task_create() when a new task is started. If
-#   set, all sockets will appear to be closed in the new task.
-# CONFIG_SCHED_WORKQUEUE.  Create a dedicated "worker" thread to
-#  handle delayed processing from interrupt handlers.  This feature
-#  is required for some drivers but, if there are not complaints,
-#  can be safely disabled.  The worker thread also performs
-#  garbage collection -- completing any delayed memory deallocations
-#  from interrupt handlers.  If the worker thread is disabled,
-#  then that clean will be performed by the IDLE thread instead
-#  (which runs at the lowest of priority and may not be appropriate
-#  if memory reclamation is of high priority).  If CONFIG_SCHED_WORKQUEUE
-#  is enabled, then the following options can also be used:
-# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker
-#  thread.  Default: 50
-# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for
-#  work in units of microseconds.  Default: 50*1000 (50 MS).
-# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker
-#  thread.  Default: CONFIG_IDLETHREAD_STACKSIZE.
-# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up
-#  the worker thread.  Default: 4
-# CONFIG_SCHED_WAITPID - Enable the waitpid() API
-# CONFIG_SCHED_ATEXIT - Enabled the atexit() API
+# Board Selection
 #
-CONFIG_USER_ENTRYPOINT="user_start"
-#CONFIG_APPS_DIR=
-CONFIG_BUILD_FLAT=y
-CONFIG_DEBUG=n
-CONFIG_DEBUG_VERBOSE=n
-CONFIG_DEBUG_SYMBOLS=y
-CONFIG_DEBUG_FS=n
-CONFIG_DEBUG_GRAPHICS=n
-CONFIG_DEBUG_LCD=n
-CONFIG_DEBUG_USB=n
-CONFIG_DEBUG_NET=n
-CONFIG_DEBUG_RTC=n
-CONFIG_DEBUG_ANALOG=n
-CONFIG_DEBUG_PWM=n
-CONFIG_DEBUG_CAN=n
-CONFIG_DEBUG_I2C=n
-CONFIG_DEBUG_INPUT=n
-
-CONFIG_MSEC_PER_TICK=1
-CONFIG_HAVE_CXX=y
-CONFIG_HAVE_CXXINITIALIZE=y
-CONFIG_MM_REGIONS=1
-CONFIG_MM_SMALL=y
-CONFIG_ARCH_LOWPUTC=y
-CONFIG_RR_INTERVAL=0
-CONFIG_SCHED_INSTRUMENTATION=n
-CONFIG_TASK_NAME_SIZE=8
-CONFIG_START_YEAR=1970
-CONFIG_START_MONTH=1
-CONFIG_START_DAY=1
-CONFIG_GREGORIAN_TIME=n
-CONFIG_JULIAN_TIME=n
-# this eats ~1KiB of RAM ... work out why
-CONFIG_DEV_CONSOLE=y
-CONFIG_DEV_LOWCONSOLE=n
-CONFIG_MUTEX_TYPES=n
-CONFIG_PRIORITY_INHERITANCE=n
-CONFIG_SEM_PREALLOCHOLDERS=0
-CONFIG_SEM_NNESTPRIO=0
-CONFIG_FDCLONE_DISABLE=y
-CONFIG_FDCLONE_STDIO=y
-CONFIG_SDCLONE_DISABLE=y
-CONFIG_SCHED_WORKQUEUE=n
-CONFIG_SCHED_WORKPRIORITY=50
-CONFIG_SCHED_WORKPERIOD=50000
-CONFIG_SCHED_WORKSTACKSIZE=1024
-CONFIG_SIG_SIGWORK=4
-CONFIG_SCHED_WAITPID=n
-CONFIG_SCHED_ATEXIT=n
+CONFIG_ARCH_BOARD_PX4IO_V2=y
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="px4io-v2"
 
-CONFIG_ARCH_HAVE_CUSTOMOPT=y
-CONFIG_DEBUG_NOOPT=y
+#
+# Custom Board Configuration
+#
+CONFIG_ARCH_BOARD_CUSTOM_DIR=""
+# CONFIG_BOARD_CUSTOM_LEDS is not set
+# CONFIG_BOARD_CUSTOM_BUTTONS is not set
+
+#
+# Common Board Options
+#
 
 #
-# The following can be used to disable categories of
-# APIs supported by the OS.  If the compiler supports
-# weak functions, then it should not be necessary to
-# disable functions unless you want to restrict usage
-# of those APIs.
+# Board-Specific Options
 #
-# There are certain dependency relationships in these
-# features.
+
 #
-# o mq_notify logic depends on signals to awaken tasks
-#   waiting for queues to become full or empty.
-# o pthread_condtimedwait() depends on signals to wake
-#   up waiting tasks.
+# RTOS Features
 #
-CONFIG_DISABLE_CLOCK=n
+CONFIG_DISABLE_OS_API=y
 CONFIG_DISABLE_POSIX_TIMERS=y
 CONFIG_DISABLE_PTHREAD=y
 CONFIG_DISABLE_SIGNALS=y
 CONFIG_DISABLE_MQUEUE=y
-CONFIG_DISABLE_MOUNTPOINT=y
 CONFIG_DISABLE_ENVIRON=y
-CONFIG_DISABLE_POLL=y
 
 #
-# Misc libc settings
-#
-# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
-#   little smaller if we do not support fieldwidthes
-#
-CONFIG_NOPRINTF_FIELDWIDTH=n
-
-#
-# Allow for architecture optimized implementations
-#
-# The architecture can provide optimized versions of the
-# following to improve system performance
-#
-CONFIG_ARCH_MEMCPY=n
-CONFIG_ARCH_MEMCMP=n
-CONFIG_ARCH_MEMMOVE=n
-CONFIG_ARCH_MEMSET=n
-CONFIG_ARCH_STRCMP=n
-CONFIG_ARCH_STRCPY=n
-CONFIG_ARCH_STRNCPY=n
-CONFIG_ARCH_STRLEN=n
-CONFIG_ARCH_STRNLEN=n
-CONFIG_ARCH_BZERO=n
-
-#
-# Sizes of configurable things (0 disables)
-#
-# CONFIG_MAX_TASKS - The maximum number of simultaneously
-#   active tasks.  This value must be a power of two.
-# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
-#   of parameters that a task may receive (i.e., maxmum value
-#   of 'argc')
-# CONFIG_NPTHREAD_KEYS - The number of items of thread-
-#   specific data that can be retained
-# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
-#   descriptors (one for each open)
-# CONFIG_NFILE_STREAMS - The maximum number of streams that
-#   can be fopen'ed
-# CONFIG_NAME_MAX - The maximum size of a file name.
-# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
-#   on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
-# CONFIG_STDIO_LINEBUFFER - If standard C buffered I/O is enabled
-#   (CONFIG_STDIO_BUFFER_SIZE > 0), then this option may be added
-#   to force automatic, line-oriented flushing the output buffer
-#   for putc(), fputc(), putchar(), puts(), fputs(), printf(),
-#   fprintf(), and vfprintf().  When a newline is encountered in
-#   the output string, the output buffer will be flushed.  This
-#   (slightly) increases the NuttX footprint but supports the kind
-#   of behavior that people expect for printf().
-# CONFIG_NUNGET_CHARS - Number of characters that can be
-#   buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
-# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
-#   structures.  The system manages a pool of preallocated
-#   message structures to minimize dynamic allocations
-# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
-#   a fixed payload size given by this settin (does not include
-#   other message structure overhead.
-# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
-#   can be passed to a watchdog handler
-# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
-#   structures.  The system manages a pool of preallocated
-#   watchdog structures to minimize dynamic allocations
-# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
-#   timer structures.  The system manages a pool of preallocated
-#   timer structures to minimize dynamic allocations.  Set to
-#   zero for all dynamic allocations.
+# Clocks and Timers
 #
-CONFIG_MAX_TASKS=4
-CONFIG_MAX_TASK_ARGS=4
-CONFIG_NPTHREAD_KEYS=2
-CONFIG_NFILE_DESCRIPTORS=8
-CONFIG_NFILE_STREAMS=0
-CONFIG_NAME_MAX=12
-CONFIG_STDIO_BUFFER_SIZE=32
-CONFIG_STDIO_LINEBUFFER=n
-CONFIG_NUNGET_CHARS=2
-CONFIG_PREALLOC_MQ_MSGS=4
-CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_USEC_PER_TICK=1000
+# CONFIG_SYSTEM_TIME64 is not set
+# CONFIG_CLOCK_MONOTONIC is not set
+# CONFIG_JULIAN_TIME is not set
+CONFIG_START_YEAR=1970
+CONFIG_START_MONTH=1
+CONFIG_START_DAY=1
 CONFIG_MAX_WDOGPARMS=2
-CONFIG_PREALLOC_WDOGS=4
+CONFIG_PREALLOC_WDOGS=6
+CONFIG_WDOG_INTRESERVE=2
 CONFIG_PREALLOC_TIMERS=0
 
+#
+# Tasks and Scheduling
+#
+# CONFIG_INIT_NONE is not set
+CONFIG_INIT_ENTRYPOINT=y
+# CONFIG_INIT_FILEPATH is not set
+CONFIG_USER_ENTRYPOINT="user_start"
+CONFIG_RR_INTERVAL=0
+CONFIG_TASK_NAME_SIZE=8
+CONFIG_MAX_TASKS=4
+# CONFIG_SCHED_HAVE_PARENT is not set
+# CONFIG_SCHED_WAITPID is not set
 
 #
-# Settings for apps/nshlib
+# Performance Monitoring
+#
+# CONFIG_SCHED_CPULOAD is not set
+# CONFIG_SCHED_INSTRUMENTATION is not set
+
+#
+# Files and I/O
+#
+CONFIG_DEV_CONSOLE=y
+CONFIG_FDCLONE_DISABLE=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=0
+CONFIG_NAME_MAX=12
+# CONFIG_PRIORITY_INHERITANCE is not set
+
 #
-# CONFIG_NSH_BUILTIN_APPS - Support external registered,
-#   "named" applications that can be executed from the NSH
-#   command line (see apps/README.txt for more information).
-# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer
-# CONFIG_NSH_STRERROR - Use strerror(errno)
-# CONFIG_NSH_LINELEN - Maximum length of one command line
-# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
-# CONFIG_NSH_DISABLESCRIPT - Disable scripting support
-# CONFIG_NSH_DISABLEBG - Disable background commands
-# CONFIG_NSH_ROMFSETC - Use startup script in /etc
-# CONFIG_NSH_CONSOLE - Use serial console front end
-# CONFIG_NSH_TELNET - Use telnetd console front end
-# CONFIG_NSH_ARCHINIT - Platform provides architecture
-#   specific initialization (nsh_archinitialize()).
+# RTOS hooks
 #
+# CONFIG_BOARD_INITIALIZE is not set
+# CONFIG_SCHED_STARTHOOK is not set
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
 
-# Disable NSH completely
-CONFIG_NSH_CONSOLE=n
+#
+# Work Queue Support
+#
 
 #
 # Stack and heap information
 #
-# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP
-#   operation from FLASH but must copy initialized .data sections to RAM.
-#   (should also be =n for the STM3210E-EVAL which always runs from flash)
-# CONFIG_BOOT_COPYTORAM -  Some configurations boot in FLASH
-#   but copy themselves entirely into RAM for better performance.
-# CONFIG_CUSTOM_STACK - The up_ implementation will handle
-#   all stack operations outside of the nuttx model.
-# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
-# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
-#  This is the thread that (1) performs the inital boot of the system up
-#  to the point where user_start() is spawned, and (2) there after is the
-#  IDLE thread that executes only when there is no other thread ready to
-#  run.
-# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
-#  for the main user thread that begins at the user_start() entry point.
-# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
-# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
-# CONFIG_HEAP_BASE - The beginning of the heap
-# CONFIG_HEAP_SIZE - The size of the heap
-#
-CONFIG_BOOT_RUNFROMFLASH=n
-CONFIG_BOOT_COPYTORAM=n
-CONFIG_CUSTOM_STACK=n
-CONFIG_STACK_POINTER=
 CONFIG_IDLETHREAD_STACKSIZE=1024
 CONFIG_USERMAIN_STACKSIZE=1200
 CONFIG_PTHREAD_STACK_MIN=512
 CONFIG_PTHREAD_STACK_DEFAULT=1024
-CONFIG_HEAP_BASE=
-CONFIG_HEAP_SIZE=
+# CONFIG_LIB_SYSCALL is not set
+
+#
+# Device Drivers
+#
+CONFIG_DISABLE_POLL=y
+# CONFIG_DEV_NULL is not set
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+
+#
+# Buffering
+#
+# CONFIG_DRVR_WRITEBUFFER is not set
+# CONFIG_DRVR_READAHEAD is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
+# CONFIG_PWM is not set
+CONFIG_ARCH_HAVE_I2CRESET=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_I2S is not set
+# CONFIG_RTC is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_TIMER is not set
+# CONFIG_ANALOG is not set
+# CONFIG_AUDIO_DEVICES is not set
+# CONFIG_VIDEO_DEVICES is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
+# CONFIG_MMCSD is not set
+# CONFIG_MTD is not set
+# CONFIG_EEPROM is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+# CONFIG_DEV_LOWCONSOLE is not set
+# CONFIG_16550_UART is not set
+# CONFIG_ARCH_HAVE_UART is not set
+# CONFIG_ARCH_HAVE_UART0 is not set
+# CONFIG_ARCH_HAVE_UART1 is not set
+# CONFIG_ARCH_HAVE_UART2 is not set
+# CONFIG_ARCH_HAVE_UART3 is not set
+# CONFIG_ARCH_HAVE_UART4 is not set
+# CONFIG_ARCH_HAVE_UART5 is not set
+# CONFIG_ARCH_HAVE_UART6 is not set
+# CONFIG_ARCH_HAVE_UART7 is not set
+# CONFIG_ARCH_HAVE_UART8 is not set
+# CONFIG_ARCH_HAVE_SCI0 is not set
+# CONFIG_ARCH_HAVE_SCI1 is not set
+# CONFIG_ARCH_HAVE_USART0 is not set
+CONFIG_ARCH_HAVE_USART1=y
+CONFIG_ARCH_HAVE_USART2=y
+CONFIG_ARCH_HAVE_USART3=y
+# CONFIG_ARCH_HAVE_USART4 is not set
+# CONFIG_ARCH_HAVE_USART5 is not set
+# CONFIG_ARCH_HAVE_USART6 is not set
+# CONFIG_ARCH_HAVE_USART7 is not set
+# CONFIG_ARCH_HAVE_USART8 is not set
+# CONFIG_ARCH_HAVE_OTHER_UART is not set
+
+#
+# USART Configuration
+#
+CONFIG_USART1_ISUART=y
+CONFIG_USART2_ISUART=y
+CONFIG_USART3_ISUART=y
+CONFIG_MCU_SERIAL=y
+CONFIG_STANDARD_SERIAL=y
+# CONFIG_SERIAL_IFLOWCONTROL is not set
+# CONFIG_SERIAL_OFLOWCONTROL is not set
+CONFIG_ARCH_HAVE_SERIAL_TERMIOS=y
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_USART1_SERIAL_CONSOLE=y
+# CONFIG_USART2_SERIAL_CONSOLE is not set
+# CONFIG_USART3_SERIAL_CONSOLE is not set
+# CONFIG_OTHER_SERIAL_CONSOLE is not set
+# CONFIG_NO_SERIAL_CONSOLE is not set
+
+#
+# USART1 Configuration
+#
+CONFIG_USART1_RXBUFSIZE=64
+CONFIG_USART1_TXBUFSIZE=64
+CONFIG_USART1_BAUD=115200
+CONFIG_USART1_BITS=8
+CONFIG_USART1_PARITY=0
+CONFIG_USART1_2STOP=0
+# CONFIG_USART1_IFLOWCONTROL is not set
+# CONFIG_USART1_OFLOWCONTROL is not set
+
+#
+# USART2 Configuration
+#
+CONFIG_USART2_RXBUFSIZE=64
+CONFIG_USART2_TXBUFSIZE=64
+CONFIG_USART2_BAUD=115200
+CONFIG_USART2_BITS=8
+CONFIG_USART2_PARITY=0
+CONFIG_USART2_2STOP=0
+# CONFIG_USART2_IFLOWCONTROL is not set
+# CONFIG_USART2_OFLOWCONTROL is not set
+
+#
+# USART3 Configuration
+#
+CONFIG_USART3_RXBUFSIZE=64
+CONFIG_USART3_TXBUFSIZE=64
+CONFIG_USART3_BAUD=115200
+CONFIG_USART3_BITS=8
+CONFIG_USART3_PARITY=0
+CONFIG_USART3_2STOP=0
+# CONFIG_USART3_IFLOWCONTROL is not set
+# CONFIG_USART3_OFLOWCONTROL is not set
+# CONFIG_USBDEV is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
+
+#
+# System Logging Device Options
+#
+
+#
+# System Logging
+#
+# CONFIG_RAMLOG is not set
+
+#
+# Networking Support
+#
+# CONFIG_ARCH_HAVE_NET is not set
+# CONFIG_ARCH_HAVE_PHY is not set
+# CONFIG_NET is not set
+
+#
+# Crypto API
+#
+# CONFIG_CRYPTO is not set
+
+#
+# File Systems
+#
+
+#
+# File system configuration
+#
+CONFIG_DISABLE_MOUNTPOINT=y
+CONFIG_DISABLE_PSEUDOFS_OPERATIONS=y
+# CONFIG_FS_READABLE is not set
+# CONFIG_FS_WRITABLE is not set
+# CONFIG_FS_NAMED_SEMAPHORES is not set
+# CONFIG_FS_RAMMAP is not set
+# CONFIG_FS_PROCFS is not set
+
+#
+# System Logging
+#
+# CONFIG_SYSLOG is not set
+# CONFIG_SYSLOG_TIMESTAMP is not set
+
+#
+# Graphics Support
+#
+# CONFIG_NX is not set
+
+#
+# Memory Management
+#
+CONFIG_MM_SMALL=y
+CONFIG_MM_REGIONS=1
+# CONFIG_ARCH_HAVE_HEAP2 is not set
+# CONFIG_GRAN is not set
+
+#
+# Audio Support
+#
+# CONFIG_AUDIO is not set
+
+#
+# Binary Loader
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+# CONFIG_BUILTIN is not set
+# CONFIG_PIC is not set
+# CONFIG_SYMTAB_ORDEREDBYNAME is not set
+
+#
+# Library Routines
+#
+
+#
+# Standard C Library Options
+#
+CONFIG_STDIO_BUFFER_SIZE=32
+# CONFIG_STDIO_LINEBUFFER is not set
+CONFIG_NUNGET_CHARS=2
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+# CONFIG_LIBC_IOCTL_VARIADIC is not set
+CONFIG_LIB_RAND_ORDER=1
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_EXECFUNCS is not set
+CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
+CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=1024
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+
+#
+# Non-standard Library Support
+#
+# CONFIG_LIB_KBDCODEC is not set
+# CONFIG_LIB_SLCDCODEC is not set
+
+#
+# Basic CXX Support
+#
+CONFIG_C99_BOOL8=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+# CONFIG_CXX_NEWLONG is not set
+
+#
+# uClibc++ Standard C++ Library
+#
+# CONFIG_UCLIBCXX is not set
+
+#
+# Application Configuration
+#
+
+#
+# Built-In Applications
+#
+
+#
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_CONFIGDATA is not set
+# CONFIG_EXAMPLES_CPUHOG is not set
+# CONFIG_EXAMPLES_CXXTEST is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_NRF24L01TERM is not set
+# CONFIG_EXAMPLES_NSH is not set
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXTERM is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+# CONFIG_EXAMPLES_OSTEST is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POLL is not set
+# CONFIG_EXAMPLES_POSIXSPAWN is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERIALBLASTER is not set
+# CONFIG_EXAMPLES_SERIALRX is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_SLCD is not set
+# CONFIG_EXAMPLES_SMART is not set
+# CONFIG_EXAMPLES_TCPECHO is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_WEBSERVER is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_TIFF is not set
+# CONFIG_GRAPHICS_TRAVELER is not set
+
+#
+# Interpreters
+#
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+# CONFIG_NETUTILS_SMTP is not set
+# CONFIG_NETUTILS_TFTPC is not set
+# CONFIG_NETUTILS_THTTPD is not set
+# CONFIG_NETUTILS_NETLIB is not set
+# CONFIG_NETUTILS_WEBCLIENT is not set
+
+#
+# FreeModBus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+# CONFIG_NSH_LIBRARY is not set
+
+#
+# NxWidgets/NxWM
+#
+
+#
+# Platform-specific Support
+#
+# CONFIG_PLATFORM_CONFIGDATA is not set
+
+#
+# System Libraries and NSH Add-Ons
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# EMACS-like Command Line Editor
+#
+# CONFIG_SYSTEM_CLE is not set
+
+#
+# CU Minimal Terminal
+#
+# CONFIG_SYSTEM_CUTERM is not set
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# FLASH Erase-all Command
+#
+
+#
+# Intel HEX to binary conversion
+#
+# CONFIG_SYSTEM_HEX2BIN is not set
+
+#
+# I2C tool
+#
+
+#
+# INI File Parser
+#
+# CONFIG_SYSTEM_INIFILE is not set
+
+#
+# NxPlayer media player library / command Line
+#
+
+#
+# RAM test
+#
+# CONFIG_SYSTEM_RAMTEST is not set
+
+#
+# readline()
+#
+# CONFIG_SYSTEM_READLINE is not set
+
+#
+# P-Code Support
+#
+
+#
+# PHY Tool
+#
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sudoku
+#
+# CONFIG_SYSTEM_SUDOKU is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
+
+#
+# VI Work-Alike Editor
+#
+# CONFIG_SYSTEM_VI is not set
+
+#
+# Stack Monitor
+#
+
+#
+# USB CDC/ACM Device Commands
+#
+
+#
+# USB Composite Device Commands
+#
+
+#
+# USB Mass Storage Device Commands
+#
+
+#
+# USB Monitor
+#
+
+#
+# Zmodem Commands
+#
+# CONFIG_SYSTEM_ZMODEM is not set