Pull v2 pieces up to build with the merge

29 files changed, 5716 insertions, 0 deletions

diff --git a/nuttx-configs/px4fmu-v2/Kconfig b/nuttx-configs/px4fmu-v2/Kconfig
new file mode 100644
index 000000000..069b25f9e
--- /dev/null
+++ b/nuttx-configs/px4fmu-v2/Kconfig
@@ -0,0 +1,7 @@
+#
+# For a description of the syntax of this configuration file,
+# see misc/tools/kconfig-language.txt.
+#
+
+if ARCH_BOARD_PX4FMU_V2
+endif
diff --git a/nuttx-configs/px4fmu-v2/common/Make.defs b/nuttx-configs/px4fmu-v2/common/Make.defs
new file mode 100644
index 000000000..be387dce1
--- /dev/null
+++ b/nuttx-configs/px4fmu-v2/common/Make.defs
@@ -0,0 +1,184 @@
+############################################################################
+# configs/px4fmu/common/Make.defs
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+#
+# Generic Make.defs for the PX4FMUV2
+# Do not specify/use this file directly - it is included by config-specific
+# Make.defs in the per-config directories.
+#
+
+include ${TOPDIR}/tools/Config.mk
+
+#
+# We only support building with the ARM bare-metal toolchain from
+# https://launchpad.net/gcc-arm-embedded on Windows, Linux or Mac OS.
+#
+CONFIG_ARMV7M_TOOLCHAIN	:= GNU_EABI
+
+include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
+
+CC			 = $(CROSSDEV)gcc
+CXX			 = $(CROSSDEV)g++
+CPP			 = $(CROSSDEV)gcc -E
+LD			 = $(CROSSDEV)ld
+AR			 = $(CROSSDEV)ar rcs
+NM			 = $(CROSSDEV)nm
+OBJCOPY			 = $(CROSSDEV)objcopy
+OBJDUMP			 = $(CROSSDEV)objdump
+
+MAXOPTIMIZATION		 = -O3
+ARCHCPUFLAGS		 = -mcpu=cortex-m4 \
+			   -mthumb \
+			   -march=armv7e-m \
+			   -mfpu=fpv4-sp-d16 \
+			   -mfloat-abi=hard
+
+
+# enable precise stack overflow tracking
+INSTRUMENTATIONDEFINES	 = -finstrument-functions \
+			   -ffixed-r10
+
+# pull in *just* libm from the toolchain ... this is grody
+LIBM			 = "${shell $(CC) $(ARCHCPUFLAGS) -print-file-name=libm.a}"
+EXTRA_LIBS		+= $(LIBM)
+
+# use our linker script
+LDSCRIPT		 = ld.script
+
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  DIRLINK		 = $(TOPDIR)/tools/copydir.sh
+  DIRUNLINK		 = $(TOPDIR)/tools/unlink.sh
+  MKDEP			 = $(TOPDIR)/tools/mknulldeps.sh
+  ARCHINCLUDES		 = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+  ARCHXXINCLUDES	 = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+  ARCHSCRIPT		 = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/common/$(LDSCRIPT)}"
+else
+  ifeq ($(PX4_WINTOOL),y)
+    # Windows-native toolchains (MSYS)
+    DIRLINK		 = $(TOPDIR)/tools/copydir.sh
+    DIRUNLINK		 = $(TOPDIR)/tools/unlink.sh
+    MKDEP		 = $(TOPDIR)/tools/mknulldeps.sh
+    ARCHINCLUDES	 = -I. -isystem $(TOPDIR)/include
+    ARCHXXINCLUDES	 = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+    ARCHSCRIPT		 = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/common/$(LDSCRIPT)
+  else
+    # Linux/Cygwin-native toolchain 
+    MKDEP		 = $(TOPDIR)/tools/mkdeps.sh
+    ARCHINCLUDES	 = -I. -isystem $(TOPDIR)/include
+    ARCHXXINCLUDES	 = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+    ARCHSCRIPT		 = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/common/$(LDSCRIPT)
+  endif
+endif
+
+# tool versions
+ARCHCCVERSION		 = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR		 = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+# optimisation flags
+ARCHOPTIMIZATION	 = $(MAXOPTIMIZATION) \
+			   -fno-strict-aliasing \
+			   -fno-strength-reduce \
+			   -fomit-frame-pointer \
+   			   -funsafe-math-optimizations \
+   			   -fno-builtin-printf \
+   			   -ffunction-sections \
+   			   -fdata-sections
+
+ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
+ARCHOPTIMIZATION	+= -g
+endif
+
+ARCHCFLAGS		 = -std=gnu99
+ARCHCXXFLAGS		 = -fno-exceptions -fno-rtti -std=gnu++0x
+ARCHWARNINGS		 = -Wall \
+			   -Wextra \
+			   -Wdouble-promotion \
+			   -Wshadow \
+			   -Wfloat-equal \
+			   -Wframe-larger-than=1024 \
+			   -Wpointer-arith \
+			   -Wlogical-op \
+			   -Wmissing-declarations \
+			   -Wpacked \
+			   -Wno-unused-parameter
+#   -Wcast-qual  - generates spurious noreturn attribute warnings, try again later
+#   -Wconversion - would be nice, but too many "risky-but-safe" conversions in the code
+#   -Wcast-align - would help catch bad casts in some cases, but generates too many false positives
+
+ARCHCWARNINGS		 = $(ARCHWARNINGS) \
+			   -Wbad-function-cast \
+			   -Wstrict-prototypes \
+			   -Wold-style-declaration \
+			   -Wmissing-parameter-type \
+			   -Wmissing-prototypes \
+			   -Wnested-externs \
+			   -Wunsuffixed-float-constants
+ARCHWARNINGSXX		 = $(ARCHWARNINGS) \
+			   -Wno-psabi
+ARCHDEFINES		 =
+ARCHPICFLAGS		 = -fpic -msingle-pic-base -mpic-register=r10
+
+# this seems to be the only way to add linker flags
+EXTRA_LIBS		+= --warn-common \
+			   --gc-sections
+
+CFLAGS			 = $(ARCHCFLAGS) $(ARCHCWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -fno-common
+CPICFLAGS		 = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS		 = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS		 = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS		 = $(ARCHINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS			 = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1		 = -r -d -warn-common
+NXFLATLDFLAGS2		 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
+LDNXFLATFLAGS		 = -e main -s 2048
+
+OBJEXT			 = .o
+LIBEXT			 = .a
+EXEEXT			 =
+
+
+# produce partially-linked $1 from files in $2
+define PRELINK
+	@echo "PRELINK: $1"
+	$(Q) $(LD) -Ur -o $1 $2 && $(OBJCOPY) --localize-hidden $1
+endef
+
+HOSTCC			 = gcc
+HOSTINCLUDES		 = -I.
+HOSTCFLAGS		 = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS		 =
+
diff --git a/nuttx-configs/px4fmu-v2/common/ld.script b/nuttx-configs/px4fmu-v2/common/ld.script
new file mode 100644
index 000000000..1be39fb87
--- /dev/null
+++ b/nuttx-configs/px4fmu-v2/common/ld.script
@@ -0,0 +1,150 @@
+/****************************************************************************
+ * configs/px4fmu/common/ld.script
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The STM32F427 has 2048Kb of FLASH beginning at address 0x0800:0000 and
+ * 256Kb of SRAM. SRAM is split up into three blocks:
+ *
+ * 1) 112Kb of SRAM beginning at address 0x2000:0000
+ * 2)  16Kb of SRAM beginning at address 0x2001:c000
+ * 3)  64Kb of SRAM beginning at address 0x2002:0000
+ * 4)  64Kb of TCM SRAM beginning at address 0x1000:0000
+ *
+ * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
+ * where the code expects to begin execution by jumping to the entry point in
+ * the 0x0800:0000 address range.
+ *
+ * The first 0x4000 of flash is reserved for the bootloader.
+ */
+
+MEMORY
+{
+    flash (rx)   : ORIGIN = 0x08004000, LENGTH = 2032K
+    sram (rwx)   : ORIGIN = 0x20000000, LENGTH = 192K
+    ccsram (rwx) : ORIGIN = 0x10000000, LENGTH = 64K
+}
+
+OUTPUT_ARCH(arm)
+
+ENTRY(__start)		/* treat __start as the anchor for dead code stripping */
+EXTERN(_vectors)	/* force the vectors to be included in the output */
+
+/* 
+ * Ensure that abort() is present in the final object.  The exception handling
+ * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
+ */
+EXTERN(abort)
+
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		*(.text .text.*)        
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)        
+		*(.gnu.linkonce.t.*)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+
+		/* 
+		 * This is a hack to make the newlib libm __errno() call
+		 * use the NuttX get_errno_ptr() function.
+		 */
+		__errno = get_errno_ptr;
+	} > flash
+
+	/*
+	 * Init functions (static constructors and the like)
+	 */
+        .init_section : {
+                _sinit = ABSOLUTE(.);
+                KEEP(*(.init_array .init_array.*))
+                _einit = ABSOLUTE(.);
+        } > flash
+
+	/*
+	 * Construction data for parameters.
+	 */
+	__param ALIGN(4): {
+		__param_start = ABSOLUTE(.);
+		KEEP(*(__param*))
+		__param_end = ABSOLUTE(.);
+	} > flash
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > flash
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > flash
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/nuttx-configs/px4fmu-v2/include/board.h b/nuttx-configs/px4fmu-v2/include/board.h
new file mode 100755
index 000000000..a6cdfb4d2
--- /dev/null
+++ b/nuttx-configs/px4fmu-v2/include/board.h
@@ -0,0 +1,364 @@
+/************************************************************************************
+ * configs/px4fmu/include/board.h
+ * include/arch/board/board.h
+ *
+ *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __ARCH_BOARD_BOARD_H
+#define __ARCH_BOARD_BOARD_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+#ifndef __ASSEMBLY__
+# include <stdint.h>
+#endif
+
+#include <stm32.h>
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* Clocking *************************************************************************/
+/* The PX4FMUV2 uses a 24MHz crystal connected to the HSE.
+ *
+ * This is the "standard" configuration as set up by arch/arm/src/stm32f40xx_rcc.c:
+ *   System Clock source           : PLL (HSE)
+ *   SYSCLK(Hz)                    : 168000000    Determined by PLL configuration
+ *   HCLK(Hz)                      : 168000000    (STM32_RCC_CFGR_HPRE)
+ *   AHB Prescaler                 : 1            (STM32_RCC_CFGR_HPRE)
+ *   APB1 Prescaler                : 4            (STM32_RCC_CFGR_PPRE1)
+ *   APB2 Prescaler                : 2            (STM32_RCC_CFGR_PPRE2)
+ *   HSE Frequency(Hz)             : 24000000     (STM32_BOARD_XTAL)
+ *   PLLM                          : 24           (STM32_PLLCFG_PLLM)
+ *   PLLN                          : 336          (STM32_PLLCFG_PLLN)
+ *   PLLP                          : 2            (STM32_PLLCFG_PLLP)
+ *   PLLQ                          : 7            (STM32_PLLCFG_PPQ)
+ *   Main regulator output voltage : Scale1 mode  Needed for high speed SYSCLK
+ *   Flash Latency(WS)             : 5
+ *   Prefetch Buffer               : OFF
+ *   Instruction cache             : ON
+ *   Data cache                    : ON
+ *   Require 48MHz for USB OTG FS, : Enabled
+ *   SDIO and RNG clock
+ */
+
+/* HSI - 16 MHz RC factory-trimmed
+ * LSI - 32 KHz RC
+ * HSE - On-board crystal frequency is 24MHz
+ * LSE - not installed
+ */
+
+#define STM32_BOARD_XTAL        24000000ul
+
+#define STM32_HSI_FREQUENCY     16000000ul
+#define STM32_LSI_FREQUENCY     32000
+#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
+//#define STM32_LSE_FREQUENCY     32768
+
+/* Main PLL Configuration.
+ *
+ * PLL source is HSE
+ * PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
+ *         = (25,000,000 / 25) * 336
+ *         = 336,000,000
+ * SYSCLK  = PLL_VCO / PLLP
+ *         = 336,000,000 / 2 = 168,000,000
+ * USB OTG FS, SDIO and RNG Clock
+ *         =  PLL_VCO / PLLQ
+ *         = 48,000,000
+ */
+
+#define STM32_PLLCFG_PLLM       RCC_PLLCFG_PLLM(24)
+#define STM32_PLLCFG_PLLN       RCC_PLLCFG_PLLN(336)
+#define STM32_PLLCFG_PLLP       RCC_PLLCFG_PLLP_2
+#define STM32_PLLCFG_PLLQ       RCC_PLLCFG_PLLQ(7)
+
+#define STM32_SYSCLK_FREQUENCY  168000000ul
+
+/* AHB clock (HCLK) is SYSCLK (168MHz) */
+
+#define STM32_RCC_CFGR_HPRE     RCC_CFGR_HPRE_SYSCLK  /* HCLK  = SYSCLK / 1 */
+#define STM32_HCLK_FREQUENCY    STM32_SYSCLK_FREQUENCY
+#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY  /* same as above, to satisfy compiler */
+
+/* APB1 clock (PCLK1) is HCLK/4 (42MHz) */
+
+#define STM32_RCC_CFGR_PPRE1    RCC_CFGR_PPRE1_HCLKd4     /* PCLK1 = HCLK / 4 */
+#define STM32_PCLK1_FREQUENCY   (STM32_HCLK_FREQUENCY/4)
+
+/* Timers driven from APB1 will be twice PCLK1 */
+
+#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM6_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM7_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM13_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM14_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+
+/* APB2 clock (PCLK2) is HCLK/2 (84MHz) */
+
+#define STM32_RCC_CFGR_PPRE2    RCC_CFGR_PPRE2_HCLKd2     /* PCLK2 = HCLK / 2 */
+#define STM32_PCLK2_FREQUENCY   (STM32_HCLK_FREQUENCY/2)
+
+/* Timers driven from APB2 will be twice PCLK2 */
+
+#define STM32_APB2_TIM1_CLKIN   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM8_CLKIN   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM9_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB2_TIM10_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB2_TIM11_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+
+/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
+ * otherwise frequency is 2xAPBx. 
+ * Note: TIM1,8 are on APB2, others on APB1
+ */
+
+#define STM32_TIM18_FREQUENCY   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_TIM27_FREQUENCY   (2*STM32_PCLK1_FREQUENCY)
+
+/* SDIO dividers.  Note that slower clocking is required when DMA is disabled 
+ * in order to avoid RX overrun/TX underrun errors due to delayed responses
+ * to service FIFOs in interrupt driven mode.  These values have not been
+ * tuned!!!
+ *
+ * HCLK=72MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(178+2)=400 KHz
+ */
+  
+#define SDIO_INIT_CLKDIV        (178 << SDIO_CLKCR_CLKDIV_SHIFT)
+
+/* DMA ON:  HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(2+2)=18 MHz
+ * DMA OFF: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(3+2)=14.4 MHz
+ */
+
+#ifdef CONFIG_SDIO_DMA
+#  define SDIO_MMCXFR_CLKDIV    (2 << SDIO_CLKCR_CLKDIV_SHIFT) 
+#else
+#  define SDIO_MMCXFR_CLKDIV    (3 << SDIO_CLKCR_CLKDIV_SHIFT) 
+#endif
+
+/* DMA ON:  HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(1+2)=24 MHz
+ * DMA OFF: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(3+2)=14.4 MHz
+ */
+
+#ifdef CONFIG_SDIO_DMA
+#  define SDIO_SDXFR_CLKDIV     (1 << SDIO_CLKCR_CLKDIV_SHIFT)
+#else
+#  define SDIO_SDXFR_CLKDIV     (3 << SDIO_CLKCR_CLKDIV_SHIFT)
+#endif
+
+/* DMA Channl/Stream Selections *****************************************************/
+/* Stream selections are arbitrary for now but might become important in the future
+ * is we set aside more DMA channels/streams.
+ *
+ * SDIO DMA
+ *   DMAMAP_SDIO_1 = Channel 4, Stream 3 <- may later be used by SPI DMA
+ *   DMAMAP_SDIO_2 = Channel 4, Stream 6
+ */
+
+#define DMAMAP_SDIO DMAMAP_SDIO_1
+
+/* High-resolution timer
+ */
+#define HRT_TIMER		8	/* use timer8 for the HRT */
+#define HRT_TIMER_CHANNEL	1	/* use capture/compare channel */
+
+/* Alternate function pin selections ************************************************/
+
+/*
+ * UARTs.
+ */
+#define GPIO_USART1_RX	GPIO_USART1_RX_1	/* console in from IO */
+#define GPIO_USART1_TX	0			/* USART1 is RX-only */
+
+#define GPIO_USART2_RX	GPIO_USART2_RX_2
+#define GPIO_USART2_TX	GPIO_USART2_TX_2
+#define GPIO_USART2_RTS	GPIO_USART2_RTS_2
+#define GPIO_USART2_CTS	GPIO_USART2_CTS_2
+
+#define GPIO_USART3_RX	GPIO_USART3_RX_3
+#define GPIO_USART3_TX	GPIO_USART3_TX_3
+#define GPIO_USART2_RTS	GPIO_USART2_RTS_2
+#define GPIO_USART2_CTS	GPIO_USART2_CTS_2
+
+#define GPIO_UART4_RX	GPIO_UART4_RX_1
+#define GPIO_UART4_TX	GPIO_UART4_TX_1
+
+#define GPIO_USART6_RX	GPIO_USART6_RX_1
+#define GPIO_USART6_TX	GPIO_USART6_TX_1
+
+#define GPIO_UART7_RX	GPIO_UART7_RX_1
+#define GPIO_UART7_TX	GPIO_UART7_TX_1
+
+/* UART8 has no alternate pin config */
+
+/* UART RX DMA configurations */
+#define DMAMAP_USART1_RX DMAMAP_USART1_RX_2
+#define DMAMAP_USART6_RX DMAMAP_USART6_RX_2
+
+/*
+ * PWM
+ *
+ * Six PWM outputs are configured.
+ *
+ * Pins:
+ *
+ * CH1 : PE14 : TIM1_CH4
+ * CH2 : PE13 : TIM1_CH3
+ * CH3 : PE11 : TIM1_CH2
+ * CH4 : PE9  : TIM1_CH1
+ * CH5 : PD13 : TIM4_CH2
+ * CH6 : PD14 : TIM4_CH3
+ *
+ */
+#define GPIO_TIM1_CH1OUT	GPIO_TIM1_CH1OUT_2
+#define GPIO_TIM1_CH2OUT	GPIO_TIM1_CH2OUT_2
+#define GPIO_TIM1_CH3OUT	GPIO_TIM1_CH3OUT_2
+#define GPIO_TIM1_CH4OUT	GPIO_TIM1_CH4OUT_2
+#define GPIO_TIM4_CH2OUT	GPIO_TIM4_CH2OUT_2
+#define GPIO_TIM4_CH3OUT	GPIO_TIM4_CH3OUT_2
+
+/* 
+ * CAN
+ *
+ * CAN1 is routed to the onboard transceiver. 
+ * CAN2 is routed to the expansion connector.
+ */
+
+#define GPIO_CAN1_RX	GPIO_CAN1_RX_3
+#define GPIO_CAN1_TX	GPIO_CAN1_TX_3
+#define GPIO_CAN2_RX	GPIO_CAN2_RX_1
+#define GPIO_CAN2_TX	GPIO_CAN2_TX_2
+
+/*
+ * I2C
+ *
+ * The optional _GPIO configurations allow the I2C driver to manually
+ * reset the bus to clear stuck slaves.  They match the pin configuration,
+ * but are normally-high GPIOs.
+ */
+#define GPIO_I2C1_SCL		GPIO_I2C1_SCL_2
+#define GPIO_I2C1_SDA		GPIO_I2C1_SDA_2
+#define GPIO_I2C1_SCL_GPIO	(GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN8)
+#define GPIO_I2C1_SDA_GPIO	(GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN9)
+
+#define GPIO_I2C2_SCL		GPIO_I2C2_SCL_1
+#define GPIO_I2C2_SDA		GPIO_I2C2_SDA_1
+#define GPIO_I2C2_SCL_GPIO	(GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN10)
+#define GPIO_I2C2_SDA_GPIO	(GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN11)
+
+/*
+ * I2C busses
+ */
+#define PX4_I2C_BUS_EXPANSION	1
+#define PX4_I2C_BUS_LED		2
+
+/*
+ * Devices on the onboard bus.
+ *
+ * Note that these are unshifted addresses.
+ */
+#define PX4_I2C_OBDEV_LED	0x55
+#define PX4_I2C_OBDEV_HMC5883	0x1e
+
+/*
+ * SPI
+ *
+ * There are sensors on SPI1, and SPI2 is connected to the FRAM.
+ */
+#define GPIO_SPI1_MISO	GPIO_SPI1_MISO_1
+#define GPIO_SPI1_MOSI	GPIO_SPI1_MOSI_1
+#define GPIO_SPI1_SCK	GPIO_SPI1_SCK_1
+
+#define GPIO_SPI2_MISO	GPIO_SPI2_MISO_1
+#define GPIO_SPI2_MOSI	GPIO_SPI2_MOSI_1
+#define GPIO_SPI2_SCK	GPIO_SPI2_SCK_2
+
+/*
+ * Use these in place of the spi_dev_e enumeration to
+ * select a specific SPI device on SPI1
+ */
+#define PX4_SPIDEV_GYRO		1
+#define PX4_SPIDEV_ACCEL_MAG	2
+#define PX4_SPIDEV_BARO		3
+
+/*
+ * Tone alarm output
+ */
+#define TONE_ALARM_TIMER	2	/* timer 2 */
+#define TONE_ALARM_CHANNEL	1	/* channel 1 */
+#define GPIO_TONE_ALARM_IDLE	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN15)
+#define GPIO_TONE_ALARM		(GPIO_ALT|GPIO_AF1|GPIO_SPEED_2MHz|GPIO_PUSHPULL|GPIO_PORTA|GPIO_PIN15)
+
+/************************************************************************************
+ * Public Data
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+#undef EXTERN
+#if defined(__cplusplus)
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+/************************************************************************************
+ * Public Function Prototypes
+ ************************************************************************************/
+/************************************************************************************
+ * Name: stm32_boardinitialize
+ *
+ * Description:
+ *   All STM32 architectures must provide the following entry point.  This entry point
+ *   is called early in the intitialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+EXTERN void stm32_boardinitialize(void);
+
+#undef EXTERN
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif  /* __ARCH_BOARD_BOARD_H */
diff --git a/nuttx-configs/px4fmu-v2/include/nsh_romfsimg.h b/nuttx-configs/px4fmu-v2/include/nsh_romfsimg.h
new file mode 100644
index 000000000..15e4e7a8d
--- /dev/null
+++ b/nuttx-configs/px4fmu-v2/include/nsh_romfsimg.h
@@ -0,0 +1,42 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2013 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * nsh_romfsetc.h
+ *
+ * This file is a stub for 'make export' purposes; the actual ROMFS
+ * must be supplied by the library client.
+ */
+
+extern unsigned char romfs_img[];
+extern unsigned int romfs_img_len;
diff --git a/nuttx-configs/px4fmu-v2/nsh/Make.defs b/nuttx-configs/px4fmu-v2/nsh/Make.defs
new file mode 100644
index 000000000..00257d546
--- /dev/null
+++ b/nuttx-configs/px4fmu-v2/nsh/Make.defs
@@ -0,0 +1,3 @@
+include ${TOPDIR}/.config
+
+include $(TOPDIR)/configs/px4fmu-v2/common/Make.defs
diff --git a/nuttx-configs/px4fmu-v2/nsh/appconfig b/nuttx-configs/px4fmu-v2/nsh/appconfig
new file mode 100644
index 000000000..0e18aa8ef
--- /dev/null
+++ b/nuttx-configs/px4fmu-v2/nsh/appconfig
@@ -0,0 +1,52 @@
+############################################################################
+# configs/px4fmu/nsh/appconfig
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+# Path to example in apps/examples containing the user_start entry point
+
+CONFIGURED_APPS	+= examples/nsh
+
+# The NSH application library
+CONFIGURED_APPS += nshlib
+CONFIGURED_APPS += system/readline
+
+ifeq ($(CONFIG_CAN),y)
+#CONFIGURED_APPS += examples/can
+endif
+
+#ifeq ($(CONFIG_USBDEV),y)
+#ifeq ($(CONFIG_CDCACM),y)
+CONFIGURED_APPS += examples/cdcacm
+#endif
+#endif
diff --git a/nuttx-configs/px4fmu-v2/nsh/defconfig b/nuttx-configs/px4fmu-v2/nsh/defconfig
new file mode 100644
index 000000000..efbb883a5
--- /dev/null
+++ b/nuttx-configs/px4fmu-v2/nsh/defconfig
@@ -0,0 +1,1022 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+CONFIG_NUTTX_NEWCONFIG=y
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_HOST_LINUX is not set
+CONFIG_HOST_OSX=y
+# CONFIG_HOST_WINDOWS is not set
+# CONFIG_HOST_OTHER is not set
+
+#
+# Build Configuration
+#
+CONFIG_APPS_DIR="../apps"
+# CONFIG_BUILD_2PASS is not set
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+# CONFIG_INTELHEX_BINARY is not set
+# CONFIG_MOTOROLA_SREC is not set
+CONFIG_RAW_BINARY=y
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDBOOL_H is not set
+CONFIG_ARCH_MATH_H=y
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+# CONFIG_DEBUG is not set
+CONFIG_DEBUG_SYMBOLS=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_8051 is not set
+CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
+
+#
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+# CONFIG_ARCH_CHIP_KINETIS is not set
+# CONFIG_ARCH_CHIP_KL is not set
+# CONFIG_ARCH_CHIP_LM is not set
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_NUC1XX is not set
+# CONFIG_ARCH_CHIP_SAM34 is not set
+CONFIG_ARCH_CHIP_STM32=y
+# CONFIG_ARCH_CHIP_STR71X is not set
+CONFIG_ARCH_CORTEXM4=y
+CONFIG_ARCH_FAMILY="armv7-m"
+CONFIG_ARCH_CHIP="stm32"
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_ARCH_HAVE_CMNVECTOR=y
+CONFIG_ARMV7M_CMNVECTOR=y
+CONFIG_ARCH_HAVE_FPU=y
+CONFIG_ARCH_FPU=y
+CONFIG_ARCH_HAVE_MPU=y
+# CONFIG_ARMV7M_MPU is not set
+
+#
+# ARMV7M Configuration Options
+#
+# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
+CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y
+CONFIG_ARMV7M_STACKCHECK=y
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_SDIO_DMA=y
+# CONFIG_SDIO_DMAPRIO is not set
+# CONFIG_SDIO_WIDTH_D1_ONLY is not set
+
+#
+# STM32 Configuration Options
+#
+# CONFIG_ARCH_CHIP_STM32L151C6 is not set
+# CONFIG_ARCH_CHIP_STM32L151C8 is not set
+# CONFIG_ARCH_CHIP_STM32L151CB is not set
+# CONFIG_ARCH_CHIP_STM32L151R6 is not set
+# CONFIG_ARCH_CHIP_STM32L151R8 is not set
+# CONFIG_ARCH_CHIP_STM32L151RB is not set
+# CONFIG_ARCH_CHIP_STM32L151V6 is not set
+# CONFIG_ARCH_CHIP_STM32L151V8 is not set
+# CONFIG_ARCH_CHIP_STM32L151VB is not set
+# CONFIG_ARCH_CHIP_STM32L152C6 is not set
+# CONFIG_ARCH_CHIP_STM32L152C8 is not set
+# CONFIG_ARCH_CHIP_STM32L152CB is not set
+# CONFIG_ARCH_CHIP_STM32L152R6 is not set
+# CONFIG_ARCH_CHIP_STM32L152R8 is not set
+# CONFIG_ARCH_CHIP_STM32L152RB is not set
+# CONFIG_ARCH_CHIP_STM32L152V6 is not set
+# CONFIG_ARCH_CHIP_STM32L152V8 is not set
+# CONFIG_ARCH_CHIP_STM32L152VB is not set
+# CONFIG_ARCH_CHIP_STM32F100C8 is not set
+# CONFIG_ARCH_CHIP_STM32F100CB is not set
+# CONFIG_ARCH_CHIP_STM32F100R8 is not set
+# CONFIG_ARCH_CHIP_STM32F100RB is not set
+# CONFIG_ARCH_CHIP_STM32F100RC is not set
+# CONFIG_ARCH_CHIP_STM32F100RD is not set
+# CONFIG_ARCH_CHIP_STM32F100RE is not set
+# CONFIG_ARCH_CHIP_STM32F100V8 is not set
+# CONFIG_ARCH_CHIP_STM32F100VB is not set
+# CONFIG_ARCH_CHIP_STM32F100VC is not set
+# CONFIG_ARCH_CHIP_STM32F100VD is not set
+# CONFIG_ARCH_CHIP_STM32F100VE is not set
+# CONFIG_ARCH_CHIP_STM32F103C4 is not set
+# CONFIG_ARCH_CHIP_STM32F103C8 is not set
+# CONFIG_ARCH_CHIP_STM32F103RET6 is not set
+# CONFIG_ARCH_CHIP_STM32F103VCT6 is not set
+# CONFIG_ARCH_CHIP_STM32F103VET6 is not set
+# CONFIG_ARCH_CHIP_STM32F103ZET6 is not set
+# CONFIG_ARCH_CHIP_STM32F105VBT7 is not set
+# CONFIG_ARCH_CHIP_STM32F107VC is not set
+# CONFIG_ARCH_CHIP_STM32F207IG is not set
+# CONFIG_ARCH_CHIP_STM32F302CB is not set
+# CONFIG_ARCH_CHIP_STM32F302CC is not set
+# CONFIG_ARCH_CHIP_STM32F302RB is not set
+# CONFIG_ARCH_CHIP_STM32F302RC is not set
+# CONFIG_ARCH_CHIP_STM32F302VB is not set
+# CONFIG_ARCH_CHIP_STM32F302VC is not set
+# CONFIG_ARCH_CHIP_STM32F303CB is not set
+# CONFIG_ARCH_CHIP_STM32F303CC is not set
+# CONFIG_ARCH_CHIP_STM32F303RB is not set
+# CONFIG_ARCH_CHIP_STM32F303RC is not set
+# CONFIG_ARCH_CHIP_STM32F303VB is not set
+# CONFIG_ARCH_CHIP_STM32F303VC is not set
+# CONFIG_ARCH_CHIP_STM32F405RG is not set
+# CONFIG_ARCH_CHIP_STM32F405VG is not set
+# CONFIG_ARCH_CHIP_STM32F405ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407VE is not set
+# CONFIG_ARCH_CHIP_STM32F407VG is not set
+# CONFIG_ARCH_CHIP_STM32F407ZE is not set
+# CONFIG_ARCH_CHIP_STM32F407ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407IE is not set
+# CONFIG_ARCH_CHIP_STM32F407IG is not set
+CONFIG_ARCH_CHIP_STM32F427V=y
+# CONFIG_ARCH_CHIP_STM32F427Z is not set
+# CONFIG_ARCH_CHIP_STM32F427I is not set
+# CONFIG_STM32_STM32L15XX is not set
+# CONFIG_STM32_ENERGYLITE is not set
+# CONFIG_STM32_STM32F10XX is not set
+# CONFIG_STM32_VALUELINE is not set
+# CONFIG_STM32_CONNECTIVITYLINE is not set
+# CONFIG_STM32_PERFORMANCELINE is not set
+# CONFIG_STM32_HIGHDENSITY is not set
+# CONFIG_STM32_MEDIUMDENSITY is not set
+# CONFIG_STM32_LOWDENSITY is not set
+# CONFIG_STM32_STM32F20XX is not set
+# CONFIG_STM32_STM32F30XX is not set
+CONFIG_STM32_STM32F40XX=y
+CONFIG_STM32_STM32F427=y
+# CONFIG_STM32_DFU is not set
+
+#
+# STM32 Peripheral Support
+#
+CONFIG_STM32_ADC1=y
+# CONFIG_STM32_ADC2 is not set
+# CONFIG_STM32_ADC3 is not set
+CONFIG_STM32_BKPSRAM=y
+# CONFIG_STM32_CAN1 is not set
+# CONFIG_STM32_CAN2 is not set
+CONFIG_STM32_CCMDATARAM=y
+# CONFIG_STM32_CRC is not set
+# CONFIG_STM32_CRYP is not set
+CONFIG_STM32_DMA1=y
+CONFIG_STM32_DMA2=y
+# CONFIG_STM32_DAC1 is not set
+# CONFIG_STM32_DAC2 is not set
+# CONFIG_STM32_DCMI is not set
+# CONFIG_STM32_ETHMAC is not set
+# CONFIG_STM32_FSMC is not set
+# CONFIG_STM32_HASH is not set
+CONFIG_STM32_I2C1=y
+CONFIG_STM32_I2C2=y
+# CONFIG_STM32_I2C3 is not set
+CONFIG_STM32_OTGFS=y
+# CONFIG_STM32_OTGHS is not set
+CONFIG_STM32_PWR=y
+# CONFIG_STM32_RNG is not set
+CONFIG_STM32_SDIO=y
+CONFIG_STM32_SPI1=y
+CONFIG_STM32_SPI2=y
+# CONFIG_STM32_SPI3 is not set
+# CONFIG_STM32_SPI4 is not set
+# CONFIG_STM32_SPI5 is not set
+# CONFIG_STM32_SPI6 is not set
+CONFIG_STM32_SYSCFG=y
+CONFIG_STM32_TIM1=y
+# CONFIG_STM32_TIM2 is not set
+CONFIG_STM32_TIM3=y
+CONFIG_STM32_TIM4=y
+# CONFIG_STM32_TIM5 is not set
+# CONFIG_STM32_TIM6 is not set
+# CONFIG_STM32_TIM7 is not set
+# CONFIG_STM32_TIM8 is not set
+CONFIG_STM32_TIM9=y
+CONFIG_STM32_TIM10=y
+CONFIG_STM32_TIM11=y
+# CONFIG_STM32_TIM12 is not set
+# CONFIG_STM32_TIM13 is not set
+# CONFIG_STM32_TIM14 is not set
+CONFIG_STM32_USART1=y
+CONFIG_STM32_USART2=y
+CONFIG_STM32_USART3=y
+CONFIG_STM32_UART4=y
+# CONFIG_STM32_UART5 is not set
+CONFIG_STM32_USART6=y
+CONFIG_STM32_UART7=y
+CONFIG_STM32_UART8=y
+# CONFIG_STM32_IWDG is not set
+CONFIG_STM32_WWDG=y
+CONFIG_STM32_ADC=y
+CONFIG_STM32_SPI=y
+CONFIG_STM32_I2C=y
+
+#
+# Alternate Pin Mapping
+#
+CONFIG_STM32_FLASH_PREFETCH=y
+# CONFIG_STM32_JTAG_DISABLE is not set
+# CONFIG_STM32_JTAG_FULL_ENABLE is not set
+# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
+CONFIG_STM32_JTAG_SW_ENABLE=y
+CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
+# CONFIG_STM32_FORCEPOWER is not set
+# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
+# CONFIG_STM32_CCMEXCLUDE is not set
+CONFIG_STM32_DMACAPABLE=y
+# CONFIG_STM32_TIM1_PWM is not set
+# CONFIG_STM32_TIM3_PWM is not set
+# CONFIG_STM32_TIM4_PWM is not set
+# CONFIG_STM32_TIM9_PWM is not set
+# CONFIG_STM32_TIM10_PWM is not set
+# CONFIG_STM32_TIM11_PWM is not set
+# CONFIG_STM32_TIM1_ADC is not set
+# CONFIG_STM32_TIM3_ADC is not set
+# CONFIG_STM32_TIM4_ADC is not set
+CONFIG_STM32_USART=y
+
+#
+# U[S]ART Configuration
+#
+# CONFIG_USART1_RS485 is not set
+CONFIG_USART1_RXDMA=y
+# CONFIG_USART2_RS485 is not set
+CONFIG_USART2_RXDMA=y
+# CONFIG_USART3_RS485 is not set
+CONFIG_USART3_RXDMA=y
+# CONFIG_UART4_RS485 is not set
+CONFIG_UART4_RXDMA=y
+# CONFIG_UART5_RXDMA is not set
+# CONFIG_USART6_RS485 is not set
+# CONFIG_USART6_RXDMA is not set
+# CONFIG_USART7_RXDMA is not set
+CONFIG_USART8_RXDMA=y
+CONFIG_STM32_USART_SINGLEWIRE=y
+
+#
+# SPI Configuration
+#
+# CONFIG_STM32_SPI_INTERRUPTS is not set
+# CONFIG_STM32_SPI_DMA is not set
+
+#
+# I2C Configuration
+#
+# CONFIG_STM32_I2C_DYNTIMEO is not set
+CONFIG_STM32_I2CTIMEOSEC=0
+CONFIG_STM32_I2CTIMEOMS=10
+CONFIG_STM32_I2CTIMEOTICKS=500
+# CONFIG_STM32_I2C_DUTY16_9 is not set
+
+#
+# SDIO Configuration
+#
+CONFIG_SDIO_PRI=128
+
+#
+# USB Host Configuration
+#
+
+#
+# USB Device Configuration
+#
+
+#
+# External Memory Configuration
+#
+
+#
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_VECNOTIRQ is not set
+CONFIG_ARCH_DMA=y
+CONFIG_ARCH_IRQPRIO=y
+# CONFIG_CUSTOM_STACK is not set
+# CONFIG_ADDRENV is not set
+CONFIG_ARCH_HAVE_VFORK=y
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
+# CONFIG_ARCH_HAVE_RAMFUNCS is not set
+CONFIG_ARCH_HAVE_RAMVECTORS=y
+# CONFIG_ARCH_RAMVECTORS is not set
+
+#
+# Board Settings
+#
+CONFIG_BOARD_LOOPSPERMSEC=16717
+# CONFIG_ARCH_CALIBRATION is not set
+CONFIG_DRAM_START=0x20000000
+CONFIG_DRAM_SIZE=262144
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=0
+
+#
+# Boot options
+#
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
+
+#
+# Board Selection
+#
+CONFIG_ARCH_BOARD_PX4FMU_V2=y
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="px4fmu-v2"
+
+#
+# Common Board Options
+#
+CONFIG_NSH_MMCSDMINOR=0
+
+#
+# Board-Specific Options
+#
+
+#
+# RTOS Features
+#
+# CONFIG_BOARD_INITIALIZE is not set
+CONFIG_MSEC_PER_TICK=1
+CONFIG_RR_INTERVAL=0
+CONFIG_SCHED_INSTRUMENTATION=y
+CONFIG_TASK_NAME_SIZE=24
+# CONFIG_SCHED_HAVE_PARENT is not set
+# CONFIG_JULIAN_TIME is not set
+CONFIG_START_YEAR=1970
+CONFIG_START_MONTH=1
+CONFIG_START_DAY=1
+# CONFIG_DEV_CONSOLE is not set
+# CONFIG_MUTEX_TYPES is not set
+CONFIG_PRIORITY_INHERITANCE=y
+CONFIG_SEM_PREALLOCHOLDERS=8
+CONFIG_SEM_NNESTPRIO=8
+# CONFIG_FDCLONE_DISABLE is not set
+CONFIG_FDCLONE_STDIO=y
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SCHED_WAITPID=y
+# CONFIG_SCHED_STARTHOOK is not set
+CONFIG_SCHED_ATEXIT=y
+CONFIG_SCHED_ATEXIT_MAX=1
+# CONFIG_SCHED_ONEXIT is not set
+CONFIG_USER_ENTRYPOINT="nsh_main"
+# CONFIG_DISABLE_OS_API is not set
+
+#
+# Signal Numbers
+#
+CONFIG_SIG_SIGUSR1=1
+CONFIG_SIG_SIGUSR2=2
+CONFIG_SIG_SIGALARM=3
+CONFIG_SIG_SIGCONDTIMEDOUT=16
+CONFIG_SIG_SIGWORK=4
+
+#
+# Sizes of configurable things (0 disables)
+#
+CONFIG_MAX_TASKS=32
+CONFIG_MAX_TASK_ARGS=10
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=32
+CONFIG_NFILE_STREAMS=25
+CONFIG_NAME_MAX=32
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=50
+CONFIG_PREALLOC_TIMERS=50
+
+#
+# Stack and heap information
+#
+CONFIG_IDLETHREAD_STACKSIZE=6000
+CONFIG_USERMAIN_STACKSIZE=4096
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+
+#
+# Device Drivers
+#
+# CONFIG_DISABLE_POLL is not set
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_PWM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_SLAVE is not set
+CONFIG_I2C_TRANSFER=y
+# CONFIG_I2C_WRITEREAD is not set
+# CONFIG_I2C_POLLED is not set
+# CONFIG_I2C_TRACE is not set
+CONFIG_ARCH_HAVE_I2CRESET=y
+CONFIG_I2C_RESET=y
+CONFIG_SPI=y
+# CONFIG_SPI_OWNBUS is not set
+CONFIG_SPI_EXCHANGE=y
+# CONFIG_SPI_CMDDATA is not set
+# CONFIG_RTC is not set
+CONFIG_WATCHDOG=y
+# CONFIG_ANALOG is not set
+# CONFIG_AUDIO_DEVICES is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
+# CONFIG_MMCSD is not set
+CONFIG_MTD=y
+
+#
+# MTD Configuration
+#
+# CONFIG_MTD_PARTITION is not set
+# CONFIG_MTD_BYTE_WRITE is not set
+
+#
+# MTD Device Drivers
+#
+# CONFIG_RAMMTD is not set
+# CONFIG_MTD_AT24XX is not set
+# CONFIG_MTD_AT45DB is not set
+# CONFIG_MTD_M25P is not set
+# CONFIG_MTD_SMART is not set
+CONFIG_MTD_RAMTRON=y
+# CONFIG_MTD_SST25 is not set
+# CONFIG_MTD_SST39FV is not set
+# CONFIG_MTD_W25 is not set
+CONFIG_PIPES=y
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+CONFIG_SERIAL=y
+# CONFIG_DEV_LOWCONSOLE is not set
+CONFIG_SERIAL_REMOVABLE=y
+# CONFIG_16550_UART is not set
+CONFIG_ARCH_HAVE_UART4=y
+CONFIG_ARCH_HAVE_UART7=y
+CONFIG_ARCH_HAVE_UART8=y
+CONFIG_ARCH_HAVE_USART1=y
+CONFIG_ARCH_HAVE_USART2=y
+CONFIG_ARCH_HAVE_USART3=y
+CONFIG_ARCH_HAVE_USART6=y
+CONFIG_MCU_SERIAL=y
+CONFIG_STANDARD_SERIAL=y
+CONFIG_SERIAL_NPOLLWAITERS=2
+# CONFIG_USART1_SERIAL_CONSOLE is not set
+# CONFIG_USART2_SERIAL_CONSOLE is not set
+# CONFIG_USART3_SERIAL_CONSOLE is not set
+# CONFIG_UART4_SERIAL_CONSOLE is not set
+# CONFIG_USART6_SERIAL_CONSOLE is not set
+# CONFIG_UART7_SERIAL_CONSOLE is not set
+# CONFIG_UART8_SERIAL_CONSOLE is not set
+CONFIG_NO_SERIAL_CONSOLE=y
+
+#
+# USART1 Configuration
+#
+CONFIG_USART1_RXBUFSIZE=16
+CONFIG_USART1_TXBUFSIZE=16
+CONFIG_USART1_BAUD=115200
+CONFIG_USART1_BITS=8
+CONFIG_USART1_PARITY=0
+CONFIG_USART1_2STOP=0
+# CONFIG_USART1_IFLOWCONTROL is not set
+# CONFIG_USART1_OFLOWCONTROL is not set
+
+#
+# USART2 Configuration
+#
+CONFIG_USART2_RXBUFSIZE=512
+CONFIG_USART2_TXBUFSIZE=512
+CONFIG_USART2_BAUD=57600
+CONFIG_USART2_BITS=8
+CONFIG_USART2_PARITY=0
+CONFIG_USART2_2STOP=0
+CONFIG_USART2_IFLOWCONTROL=y
+CONFIG_USART2_OFLOWCONTROL=y
+
+#
+# USART3 Configuration
+#
+CONFIG_USART3_RXBUFSIZE=512
+CONFIG_USART3_TXBUFSIZE=512
+CONFIG_USART3_BAUD=115200
+CONFIG_USART3_BITS=8
+CONFIG_USART3_PARITY=0
+CONFIG_USART3_2STOP=0
+CONFIG_USART3_IFLOWCONTROL=y
+CONFIG_USART3_OFLOWCONTROL=y
+
+#
+# UART4 Configuration
+#
+CONFIG_UART4_RXBUFSIZE=128
+CONFIG_UART4_TXBUFSIZE=128
+CONFIG_UART4_BAUD=57600
+CONFIG_UART4_BITS=8
+CONFIG_UART4_PARITY=0
+CONFIG_UART4_2STOP=0
+# CONFIG_UART4_IFLOWCONTROL is not set
+# CONFIG_UART4_OFLOWCONTROL is not set
+
+#
+# USART6 Configuration
+#
+CONFIG_USART6_RXBUFSIZE=16
+CONFIG_USART6_TXBUFSIZE=16
+CONFIG_USART6_BAUD=115200
+CONFIG_USART6_BITS=8
+CONFIG_USART6_PARITY=0
+CONFIG_USART6_2STOP=0
+# CONFIG_USART6_IFLOWCONTROL is not set
+# CONFIG_USART6_OFLOWCONTROL is not set
+
+#
+# UART7 Configuration
+#
+CONFIG_UART7_RXBUFSIZE=128
+CONFIG_UART7_TXBUFSIZE=128
+CONFIG_UART7_BAUD=57600
+CONFIG_UART7_BITS=8
+CONFIG_UART7_PARITY=0
+CONFIG_UART7_2STOP=0
+# CONFIG_UART7_IFLOWCONTROL is not set
+# CONFIG_UART7_OFLOWCONTROL is not set
+
+#
+# UART8 Configuration
+#
+CONFIG_UART8_RXBUFSIZE=128
+CONFIG_UART8_TXBUFSIZE=128
+CONFIG_UART8_BAUD=57600
+CONFIG_UART8_BITS=8
+CONFIG_UART8_PARITY=0
+CONFIG_UART8_2STOP=0
+# CONFIG_UART8_IFLOWCONTROL is not set
+# CONFIG_UART8_OFLOWCONTROL is not set
+CONFIG_SERIAL_IFLOWCONTROL=y
+CONFIG_SERIAL_OFLOWCONTROL=y
+CONFIG_USBDEV=y
+
+#
+# USB Device Controller Driver Options
+#
+# CONFIG_USBDEV_ISOCHRONOUS is not set
+# CONFIG_USBDEV_DUALSPEED is not set
+# CONFIG_USBDEV_SELFPOWERED is not set
+CONFIG_USBDEV_BUSPOWERED=y
+CONFIG_USBDEV_MAXPOWER=500
+# CONFIG_USBDEV_DMA is not set
+# CONFIG_USBDEV_TRACE is not set
+
+#
+# USB Device Class Driver Options
+#
+# CONFIG_USBDEV_COMPOSITE is not set
+# CONFIG_PL2303 is not set
+CONFIG_CDCACM=y
+CONFIG_CDCACM_CONSOLE=y
+CONFIG_CDCACM_EP0MAXPACKET=64
+CONFIG_CDCACM_EPINTIN=1
+CONFIG_CDCACM_EPINTIN_FSSIZE=64
+CONFIG_CDCACM_EPINTIN_HSSIZE=64
+CONFIG_CDCACM_EPBULKOUT=3
+CONFIG_CDCACM_EPBULKOUT_FSSIZE=64
+CONFIG_CDCACM_EPBULKOUT_HSSIZE=512
+CONFIG_CDCACM_EPBULKIN=2
+CONFIG_CDCACM_EPBULKIN_FSSIZE=64
+CONFIG_CDCACM_EPBULKIN_HSSIZE=512
+CONFIG_CDCACM_NWRREQS=4
+CONFIG_CDCACM_NRDREQS=4
+CONFIG_CDCACM_BULKIN_REQLEN=96
+CONFIG_CDCACM_RXBUFSIZE=256
+CONFIG_CDCACM_TXBUFSIZE=256
+CONFIG_CDCACM_VENDORID=0x26ac
+CONFIG_CDCACM_PRODUCTID=0x0010
+CONFIG_CDCACM_VENDORSTR="3D Robotics"
+CONFIG_CDCACM_PRODUCTSTR="PX4 FMU v2.x"
+# CONFIG_USBMSC is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
+
+#
+# System Logging Device Options
+#
+
+#
+# System Logging
+#
+# CONFIG_RAMLOG is not set
+
+#
+# Networking Support
+#
+# CONFIG_NET is not set
+
+#
+# File Systems
+#
+
+#
+# File system configuration
+#
+# CONFIG_DISABLE_MOUNTPOINT is not set
+# CONFIG_FS_RAMMAP is not set
+CONFIG_FS_FAT=y
+CONFIG_FAT_LCNAMES=y
+CONFIG_FAT_LFN=y
+CONFIG_FAT_MAXFNAME=32
+CONFIG_FS_FATTIME=y
+# CONFIG_FAT_DMAMEMORY is not set
+CONFIG_FS_NXFFS=y
+CONFIG_NXFFS_PREALLOCATED=y
+CONFIG_NXFFS_ERASEDSTATE=0xff
+CONFIG_NXFFS_PACKTHRESHOLD=32
+CONFIG_NXFFS_MAXNAMLEN=32
+CONFIG_NXFFS_TAILTHRESHOLD=2048
+CONFIG_FS_ROMFS=y
+# CONFIG_FS_SMARTFS is not set
+CONFIG_FS_BINFS=y
+
+#
+# System Logging
+#
+# CONFIG_SYSLOG_ENABLE is not set
+CONFIG_SYSLOG=y
+CONFIG_SYSLOG_CHAR=y
+CONFIG_SYSLOG_DEVPATH="/dev/ttyS0"
+
+#
+# Graphics Support
+#
+# CONFIG_NX is not set
+
+#
+# Memory Management
+#
+# CONFIG_MM_MULTIHEAP is not set
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=2
+CONFIG_GRAN=y
+CONFIG_GRAN_SINGLE=y
+CONFIG_GRAN_INTR=y
+
+#
+# Audio Support
+#
+# CONFIG_AUDIO is not set
+
+#
+# Binary Formats
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_BINFMT_EXEPATH is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+CONFIG_BUILTIN=y
+# CONFIG_PIC is not set
+# CONFIG_SYMTAB_ORDEREDBYNAME is not set
+
+#
+# Library Routines
+#
+
+#
+# Standard C Library Options
+#
+CONFIG_STDIO_BUFFER_SIZE=32
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+CONFIG_LIB_HOMEDIR="/"
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIB_RAND_ORDER=1
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_EXECFUNCS is not set
+CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
+CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+CONFIG_LIBC_STRERROR=y
+# CONFIG_LIBC_STRERROR_SHORT is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+CONFIG_ARCH_OPTIMIZED_FUNCTIONS=y
+CONFIG_ARCH_MEMCPY=y
+# CONFIG_ARCH_MEMCMP is not set
+# CONFIG_ARCH_MEMMOVE is not set
+# CONFIG_ARCH_MEMSET is not set
+# CONFIG_MEMSET_OPTSPEED is not set
+# CONFIG_ARCH_STRCHR is not set
+# CONFIG_ARCH_STRCMP is not set
+# CONFIG_ARCH_STRCPY is not set
+# CONFIG_ARCH_STRNCPY is not set
+# CONFIG_ARCH_STRLEN is not set
+# CONFIG_ARCH_STRNLEN is not set
+# CONFIG_ARCH_BZERO is not set
+
+#
+# Non-standard Library Support
+#
+CONFIG_SCHED_WORKQUEUE=y
+CONFIG_SCHED_HPWORK=y
+CONFIG_SCHED_WORKPRIORITY=192
+CONFIG_SCHED_WORKPERIOD=5000
+CONFIG_SCHED_WORKSTACKSIZE=2048
+CONFIG_SCHED_LPWORK=y
+CONFIG_SCHED_LPWORKPRIORITY=50
+CONFIG_SCHED_LPWORKPERIOD=50000
+CONFIG_SCHED_LPWORKSTACKSIZE=2048
+# CONFIG_LIB_KBDCODEC is not set
+# CONFIG_LIB_SLCDCODEC is not set
+
+#
+# Basic CXX Support
+#
+CONFIG_C99_BOOL8=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+# CONFIG_CXX_NEWLONG is not set
+
+#
+# uClibc++ Standard C++ Library
+#
+# CONFIG_UCLIBCXX is not set
+
+#
+# Application Configuration
+#
+
+#
+# Built-In Applications
+#
+CONFIG_BUILTIN_PROXY_STACKSIZE=1024
+
+#
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+CONFIG_EXAMPLES_CDCACM=y
+# CONFIG_EXAMPLES_COMPOSITE is not set
+# CONFIG_EXAMPLES_CXXTEST is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_LCDRW is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+CONFIG_EXAMPLES_MOUNT=y
+# CONFIG_EXAMPLES_NRF24L01TERM is not set
+CONFIG_EXAMPLES_NSH=y
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXCONSOLE is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+# CONFIG_EXAMPLES_OSTEST is not set
+# CONFIG_EXAMPLES_PASHELLO is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POSIXSPAWN is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_SLCD is not set
+# CONFIG_EXAMPLES_SMART_TEST is not set
+# CONFIG_EXAMPLES_SMART is not set
+# CONFIG_EXAMPLES_TCPECHO is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_UIP is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBMSC is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_TIFF is not set
+
+#
+# Interpreters
+#
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPC is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+# CONFIG_NETUTILS_RESOLV is not set
+# CONFIG_NETUTILS_SMTP is not set
+# CONFIG_NETUTILS_TELNETD is not set
+# CONFIG_NETUTILS_TFTPC is not set
+# CONFIG_NETUTILS_THTTPD is not set
+# CONFIG_NETUTILS_UIPLIB is not set
+# CONFIG_NETUTILS_WEBCLIENT is not set
+
+#
+# FreeModBus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+CONFIG_NSH_LIBRARY=y
+CONFIG_NSH_BUILTIN_APPS=y
+
+#
+# Disable Individual commands
+#
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DD is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_HEXDUMP is not set
+# CONFIG_NSH_DISABLE_IFCONFIG is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LOSETUP is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MB is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MKFIFO is not set
+# CONFIG_NSH_DISABLE_MKRD is not set
+# CONFIG_NSH_DISABLE_MH is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MW is not set
+# CONFIG_NSH_DISABLE_NSFMOUNT is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PING is not set
+# CONFIG_NSH_DISABLE_PUT is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SH is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
+# CONFIG_NSH_DISABLE_WGET is not set
+# CONFIG_NSH_DISABLE_XD is not set
+
+#
+# Configure Command Options
+#
+# CONFIG_NSH_CMDOPT_DF_H is not set
+CONFIG_NSH_CODECS_BUFSIZE=128
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_STRERROR=y
+CONFIG_NSH_LINELEN=128
+CONFIG_NSH_MAXARGUMENTS=12
+CONFIG_NSH_NESTDEPTH=8
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLEBG is not set
+CONFIG_NSH_ROMFSETC=y
+# CONFIG_NSH_ROMFSRC is not set
+CONFIG_NSH_ROMFSMOUNTPT="/etc"
+CONFIG_NSH_INITSCRIPT="init.d/rcS"
+CONFIG_NSH_ROMFSDEVNO=0
+CONFIG_NSH_ROMFSSECTSIZE=128
+CONFIG_NSH_ARCHROMFS=y
+CONFIG_NSH_FATDEVNO=1
+CONFIG_NSH_FATSECTSIZE=512
+CONFIG_NSH_FATNSECTORS=1024
+CONFIG_NSH_FATMOUNTPT="/tmp"
+CONFIG_NSH_CONSOLE=y
+# CONFIG_NSH_USBCONSOLE is not set
+
+#
+# USB Trace Support
+#
+# CONFIG_NSH_CONDEV is not set
+CONFIG_NSH_ARCHINIT=y
+
+#
+# NxWidgets/NxWM
+#
+
+#
+# System NSH Add-Ons
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# I2C tool
+#
+# CONFIG_SYSTEM_I2CTOOL is not set
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# FLASH Erase-all Command
+#
+
+#
+# readline()
+#
+CONFIG_SYSTEM_READLINE=y
+CONFIG_READLINE_ECHO=y
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sysinfo
+#
+CONFIG_SYSTEM_SYSINFO=y
+
+#
+# USB Monitor
+#
diff --git a/nuttx-configs/px4fmu-v2/nsh/defconfig.prev b/nuttx-configs/px4fmu-v2/nsh/defconfig.prev
new file mode 100755
index 000000000..42910ce0a
--- /dev/null
+++ b/nuttx-configs/px4fmu-v2/nsh/defconfig.prev
@@ -0,0 +1,1067 @@
+############################################################################
+# configs/px4fmu/nsh/defconfig
+#
+#   Copyright (C) 2012 PX4 Development Team. All rights reserved.
+#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+#
+# architecture selection
+#
+# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
+#   processor architecture.
+# CONFIG_ARCH_family - for use in C code.  This identifies the
+#   particular chip family that the architecture is implemented
+#   in.
+# CONFIG_ARCH_architecture - for use in C code.  This identifies the
+#   specific architecture within the chip family.
+# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
+# CONFIG_ARCH_CHIP_name - For use in C code
+# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
+#   the board that supports the particular chip or SoC.
+# CONFIG_ARCH_BOARD_name - for use in C code
+# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
+# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
+# CONFIG_DRAM_SIZE - Describes the installed DRAM.
+# CONFIG_DRAM_START - The start address of DRAM (physical)
+# CONFIG_ARCH_IRQPRIO - The STM3240xxx supports interrupt prioritization
+# CONFIG_ARCH_FPU - The STM3240xxx supports a floating point unit (FPU).
+# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
+#   stack. If defined, this symbol is the size of the interrupt
+#   stack in bytes.  If not defined, the user task stacks will be
+#   used during interrupt handling.
+# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
+# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader.
+# CONFIG_ARCH_LEDS -  Use LEDs to show state. Unique to board architecture.
+# CONFIG_ARCH_BUTTONS -  Enable support for buttons. Unique to board architecture.
+# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
+#   cause a 100 second delay during boot-up.  This 100 second delay
+#   serves no purpose other than it allows you to calibrate
+#   CONFIG_BOARD_LOOPSPERMSEC.  You simply use a stop watch to measure
+#   the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
+#   the delay actually is 100 seconds.
+# CONFIG_ARCH_DMA - Support DMA initialization
+#
+CONFIG_ARCH="arm"
+CONFIG_ARCH_ARM=y
+CONFIG_ARCH_CORTEXM4=y
+CONFIG_ARCH_CHIP="stm32"
+CONFIG_ARCH_CHIP_STM32F427V=y
+CONFIG_ARCH_BOARD="px4fmu-v2"
+CONFIG_ARCH_BOARD_PX4FMU_V2=y
+CONFIG_BOARD_LOOPSPERMSEC=16717
+CONFIG_DRAM_SIZE=0x00040000
+CONFIG_DRAM_START=0x20000000
+CONFIG_ARCH_IRQPRIO=y
+CONFIG_ARCH_FPU=y
+CONFIG_ARCH_INTERRUPTSTACK=n
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARCH_BOOTLOADER=n
+CONFIG_ARCH_LEDS=n
+CONFIG_ARCH_BUTTONS=n
+CONFIG_ARCH_CALIBRATION=n
+CONFIG_ARCH_DMA=y
+CONFIG_ARCH_MATH_H=y
+
+CONFIG_ARMV7M_CMNVECTOR=y
+CONFIG_STM32_STM32F427=y
+
+#
+# JTAG Enable settings (by default JTAG-DP and SW-DP are enabled):
+#
+#   CONFIG_STM32_DFU - Use the DFU bootloader, not JTAG (ignored)
+#
+# JTAG Enable options:
+#
+#   CONFIG_STM32_JTAG_FULL_ENABLE - Enables full SWJ (JTAG-DP + SW-DP)
+#   CONFIG_STM32_JTAG_NOJNTRST_ENABLE - Enables full SWJ (JTAG-DP + SW-DP)
+#     but without JNTRST.
+#   CONFIG_STM32_JTAG_SW_ENABLE - Set JTAG-DP disabled and SW-DP enabled
+#
+CONFIG_STM32_DFU=n
+CONFIG_STM32_JTAG_FULL_ENABLE=n
+CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n
+CONFIG_STM32_JTAG_SW_ENABLE=y
+
+#
+# On-chip CCM SRAM configuration
+#
+# CONFIG_STM32_CCMEXCLUDE - Exclude CCM SRAM from the HEAP.  You would need
+#   to do this if DMA is enabled to prevent non-DMA-able CCM memory from
+#   being a part of the stack.
+#
+CONFIG_STM32_CCMEXCLUDE=y
+
+#
+# On-board FSMC SRAM configuration
+#
+# CONFIG_STM32_FSMC - Required.  See below
+# CONFIG_MM_REGIONS - Required.  Must be 2 or 3 (see above)
+#
+# CONFIG_STM32_FSMC_SRAM=y - Indicates that SRAM is available via the
+#   FSMC (as opposed to an LCD or FLASH).
+# CONFIG_HEAP2_BASE - The base address of the SRAM in the FSMC address space
+# CONFIG_HEAP2_END - The end (+1) of the SRAM in the FSMC address space
+#
+#CONFIG_STM32_FSMC_SRAM=n
+#CONFIG_HEAP2_BASE=0x64000000
+#CONFIG_HEAP2_END=(0x64000000+(2*1024*1024))
+
+#
+#  Individual subsystems can be enabled:
+#
+# This set is exhaustive for PX4FMU and should be safe to cut and
+# paste into any other config.
+#
+# AHB1:
+CONFIG_STM32_CRC=n
+CONFIG_STM32_BKPSRAM=y
+CONFIG_STM32_CCMDATARAM=y
+CONFIG_STM32_DMA1=y
+CONFIG_STM32_DMA2=y
+CONFIG_STM32_ETHMAC=n
+CONFIG_STM32_OTGHS=n
+# AHB2:
+CONFIG_STM32_DCMI=n
+CONFIG_STM32_CRYP=n
+CONFIG_STM32_HASH=n
+CONFIG_STM32_RNG=n
+CONFIG_STM32_OTGFS=y
+# AHB3:
+CONFIG_STM32_FSMC=n
+# APB1:
+CONFIG_STM32_TIM2=n
+CONFIG_STM32_TIM3=y
+CONFIG_STM32_TIM4=y
+CONFIG_STM32_TIM5=n
+CONFIG_STM32_TIM6=n
+CONFIG_STM32_TIM7=n
+CONFIG_STM32_TIM12=n
+CONFIG_STM32_TIM13=n
+CONFIG_STM32_TIM14=n
+CONFIG_STM32_WWDG=y
+CONFIG_STM32_IWDG=n
+CONFIG_STM32_SPI2=y
+CONFIG_STM32_SPI3=n
+CONFIG_STM32_USART2=y
+CONFIG_STM32_USART3=y
+CONFIG_STM32_UART4=y
+CONFIG_STM32_UART5=n
+CONFIG_STM32_UART7=y
+CONFIG_STM32_UART8=y
+CONFIG_STM32_I2C1=y
+CONFIG_STM32_I2C2=y
+CONFIG_STM32_I2C3=n
+CONFIG_STM32_CAN1=n
+CONFIG_STM32_CAN2=n
+CONFIG_STM32_DAC=n
+CONFIG_STM32_PWR=y
+# APB2:
+CONFIG_STM32_TIM1=y
+CONFIG_STM32_TIM8=n
+CONFIG_STM32_USART1=y
+# Mostly owned by the px4io driver, but uploader needs this
+CONFIG_STM32_USART6=y
+# We use our own driver, but leave this on.
+CONFIG_STM32_ADC1=y
+CONFIG_STM32_ADC2=n
+CONFIG_STM32_ADC3=n
+CONFIG_STM32_SDIO=y
+CONFIG_STM32_SPI1=y
+CONFIG_STM32_SYSCFG=y
+CONFIG_STM32_TIM9=y
+CONFIG_STM32_TIM10=y
+CONFIG_STM32_TIM11=y
+
+#
+# Enable single wire support.  If this is not defined, then this mode cannot
+# be enabled.
+#
+CONFIG_STM32_USART_SINGLEWIRE=y
+
+#
+# We want the flash prefetch on for max performance.
+#
+STM32_FLASH_PREFETCH=y
+
+#
+# STM32F40xxx specific serial device driver settings
+#
+# CONFIG_SERIAL_TERMIOS - Serial driver supports termios.h interfaces (tcsetattr,
+#   tcflush, etc.).  If this is not defined, then the terminal settings (baud,
+#   parity, etc.) are not configurable at runtime; serial streams cannot be
+#   flushed, etc.
+# CONFIG_SERIAL_CONSOLE_REINIT - re-initializes the console serial port
+#   immediately after creating the /dev/console device.  This is required
+#   if the console serial port has RX DMA enabled.
+#
+# CONFIG_USARTn_SERIAL_CONSOLE - selects the USARTn for the
+#   console and ttys0 (default is the USART1).
+# CONFIG_USARTn_RXBUFSIZE - Characters are buffered as received.
+#   This specific the size of the receive buffer
+# CONFIG_USARTn_TXBUFSIZE - Characters are buffered before
+#   being sent.  This specific the size of the transmit buffer
+# CONFIG_USARTn_BAUD - The configure BAUD of the UART.  Must be
+# CONFIG_USARTn_BITS - The number of bits.  Must be either 7 or 8.
+# CONFIG_USARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
+# CONFIG_USARTn_2STOP - Two stop bits
+#
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_SERIAL_CONSOLE_REINIT=n
+CONFIG_STANDARD_SERIAL=y
+
+CONFIG_UART8_SERIAL_CONSOLE=y
+
+#Mavlink messages can be bigger than 128
+CONFIG_USART1_TXBUFSIZE=512
+CONFIG_USART2_TXBUFSIZE=256
+CONFIG_USART3_TXBUFSIZE=256
+CONFIG_UART4_TXBUFSIZE=256
+CONFIG_USART6_TXBUFSIZE=128
+CONFIG_UART7_TXBUFSIZE=256
+CONFIG_UART8_TXBUFSIZE=256
+
+CONFIG_USART1_RXBUFSIZE=512
+CONFIG_USART2_RXBUFSIZE=256
+CONFIG_USART3_RXBUFSIZE=256
+CONFIG_UART4_RXBUFSIZE=256
+CONFIG_USART6_RXBUFSIZE=256
+CONFIG_UART7_RXBUFSIZE=256
+CONFIG_UART8_RXBUFSIZE=256
+
+CONFIG_USART1_BAUD=115200
+CONFIG_USART2_BAUD=115200
+CONFIG_USART3_BAUD=115200
+CONFIG_UART4_BAUD=115200
+CONFIG_USART6_BAUD=115200
+CONFIG_UART7_BAUD=115200
+CONFIG_UART8_BAUD=57600
+
+CONFIG_USART1_BITS=8
+CONFIG_USART2_BITS=8
+CONFIG_USART3_BITS=8
+CONFIG_UART4_BITS=8
+CONFIG_USART6_BITS=8
+CONFIG_UART7_BITS=8
+CONFIG_UART8_BITS=8
+
+CONFIG_USART1_PARITY=0
+CONFIG_USART2_PARITY=0
+CONFIG_USART3_PARITY=0
+CONFIG_UART4_PARITY=0
+CONFIG_USART6_PARITY=0
+CONFIG_UART7_PARITY=0
+CONFIG_UART8_PARITY=0
+
+CONFIG_USART1_2STOP=0
+CONFIG_USART2_2STOP=0
+CONFIG_USART3_2STOP=0
+CONFIG_UART4_2STOP=0
+CONFIG_USART6_2STOP=0
+CONFIG_UART7_2STOP=0
+CONFIG_UART8_2STOP=0
+
+CONFIG_USART1_RXDMA=y
+CONFIG_USART2_RXDMA=y
+CONFIG_USART3_RXDMA=n
+CONFIG_UART4_RXDMA=n
+CONFIG_USART6_RXDMA=y
+CONFIG_UART7_RXDMA=n
+CONFIG_UART8_RXDMA=n
+
+#
+# STM32F40xxx specific SPI device driver settings
+#
+CONFIG_SPI_EXCHANGE=y
+# DMA needs more work, not implemented on STM32F4x yet
+#CONFIG_STM32_SPI_DMA=y
+
+#
+# STM32F40xxx specific CAN device driver settings
+#
+# CONFIG_CAN - Enables CAN support (one or both of CONFIG_STM32_CAN1 or
+#   CONFIG_STM32_CAN2 must also be defined)
+# CONFIG_CAN_EXTID - Enables support for the 29-bit extended ID.  Default
+#   Standard 11-bit IDs.
+# CONFIG_CAN_FIFOSIZE - The size of the circular buffer of CAN messages.
+#   Default: 8
+# CONFIG_CAN_NPENDINGRTR - The size of the list of pending RTR requests.
+#   Default: 4
+# CONFIG_CAN_LOOPBACK - A CAN driver may or may not support a loopback
+#   mode for testing. The STM32 CAN driver does support loopback mode.
+# CONFIG_CAN1_BAUD - CAN1 BAUD rate.  Required if CONFIG_STM32_CAN1 is defined.
+# CONFIG_CAN2_BAUD - CAN1 BAUD rate.  Required if CONFIG_STM32_CAN2 is defined.
+# CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6
+# CONFIG_CAN_TSEG2 - the number of CAN time quanta in segment 2. Default: 7
+#
+CONFIG_CAN=n
+CONFIG_CAN_EXTID=n
+#CONFIG_CAN_FIFOSIZE
+#CONFIG_CAN_NPENDINGRTR
+CONFIG_CAN_LOOPBACK=n
+CONFIG_CAN1_BAUD=700000
+CONFIG_CAN2_BAUD=700000
+
+
+# XXX remove after integration testing
+# Allow 180 us per byte, a wide margin for the 400 KHz clock we're using
+# e.g. 9.6 ms for an EEPROM page write, 0.9 ms for a MAG update
+CONFIG_STM32_I2CTIMEOUS_PER_BYTE=200
+# Constant overhead for generating I2C start / stop conditions
+CONFIG_STM32_I2CTIMEOUS_START_STOP=700
+# XXX this is bad and we want it gone
+CONFIG_I2C_WRITEREAD=y
+
+#
+# I2C configuration
+#
+CONFIG_I2C=y
+CONFIG_I2C_POLLED=n
+CONFIG_I2C_TRANSFER=y
+CONFIG_I2C_TRACE=n
+CONFIG_I2C_RESET=y
+# XXX fixed per-transaction timeout
+CONFIG_STM32_I2CTIMEOMS=10
+
+#
+# MTD support
+#
+CONFIG_MTD=y
+
+# XXX re-enable after integration testing
+
+#
+# I2C configuration
+#
+#CONFIG_I2C=y
+#CONFIG_I2C_POLLED=y
+#CONFIG_I2C_TRANSFER=y
+#CONFIG_I2C_TRACE=n
+#CONFIG_I2C_RESET=y
+
+# Dynamic timeout
+#CONFIG_STM32_I2C_DYNTIMEO=y
+#CONFIG_STM32_I2C_DYNTIMEO_STARTSTOP=500
+#CONFIG_STM32_I2C_DYNTIMEO_USECPERBYTE=200
+
+# Fixed per-transaction timeout
+#CONFIG_STM32_I2CTIMEOSEC=0
+#CONFIG_STM32_I2CTIMEOMS=10
+
+
+
+
+
+
+#
+# General build options
+#
+# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
+#   BSPs from www.ridgerun.com using the tools/mkimage.sh script
+# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
+#   used with many different loaders using the GNU objcopy program
+#   Should not be selected if you are not using the GNU toolchain.
+# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format
+#   used with many different loaders using the GNU objcopy program
+#   Should not be selected if you are not using the GNU toolchain.
+# CONFIG_RAW_BINARY - make a raw binary format file used with many
+#   different loaders using the GNU objcopy program.  This option
+#   should not be selected if you are not using the GNU toolchain.
+# CONFIG_HAVE_LIBM - toolchain supports libm.a
+#
+CONFIG_RRLOAD_BINARY=n
+CONFIG_INTELHEX_BINARY=n
+CONFIG_MOTOROLA_SREC=n
+CONFIG_RAW_BINARY=y
+CONFIG_HAVE_LIBM=y
+
+#
+# General OS setup
+#
+# CONFIG_APPS_DIR - Identifies the relative path to the directory
+#   that builds the application to link with NuttX.  Default: ../apps
+# CONFIG_DEBUG - enables built-in debug options
+# CONFIG_DEBUG_VERBOSE - enables verbose debug output
+# CONFIG_DEBUG_SYMBOLS - build without optimization and with
+#   debug symbols (needed for use with a debugger).
+# CONFIG_HAVE_CXX - Enable support for C++
+# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
+#   for initialization of static C++ instances for this architecture
+#   and for the selected toolchain (via up_cxxinitialize()).
+# CONFIG_MM_REGIONS - If the architecture includes multiple
+#   regions of memory to allocate from, this specifies the
+#   number of memory regions that the memory manager must
+#   handle and enables the API mm_addregion(start, end);
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
+#   time console output
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
+#   inform NuttX that the processor hardware is providing
+#   system timer interrupts at some interrupt interval other
+#   than 10 msec.
+# CONFIG_RR_INTERVAL - The round robin timeslice will be set
+#   this number of milliseconds;  Round robin scheduling can
+#   be disabled by setting this value to zero.
+# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in 
+#   scheduler to monitor system performance
+# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
+#   task name to save in the TCB.  Useful if scheduler
+#   instrumentation is selected.  Set to zero to disable.
+# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
+#   Used to initialize the internal time logic.
+# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions.
+#   You would only need this if you are concerned about accurate
+#   time conversions in the past or in the distant future.
+# CONFIG_JULIAN_TIME - Enables Julian time conversions. You
+#   would only need this if you are concerned about accurate
+#   time conversion in the distand past.  You must also define
+#   CONFIG_GREGORIAN_TIME in order to use Julian time.
+# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
+#   provides /dev/console.  Enables stdout, stderr, stdin.
+# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
+#   driver (minimul support)
+# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
+#   errorcheck mutexes. Enables pthread_mutexattr_settype().
+# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
+#   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
+# CONFIG_SCHED_WORKQUEUE.  Create a dedicated "worker" thread to
+#   handle delayed processing from interrupt handlers.  This feature
+#   is required for some drivers but, if there are not complaints,
+#   can be safely disabled.  The worker thread also performs
+#   garbage collection -- completing any delayed memory deallocations
+#   from interrupt handlers.  If the worker thread is disabled,
+#   then that clean will be performed by the IDLE thread instead
+#   (which runs at the lowest of priority and may not be appropriate
+#   if memory reclamation is of high priority).  If CONFIG_SCHED_WORKQUEUE
+#   is enabled, then the following options can also be used:
+# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker
+#   thread.  Default: 192
+# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for
+#   work in units of microseconds.  Default: 50*1000 (50 MS).
+# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker
+#   thread.  Default: CONFIG_IDLETHREAD_STACKSIZE.
+# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up
+#   the worker thread.  Default: 4
+#
+# CONFIG_SCHED_LPWORK. If CONFIG_SCHED_WORKQUEUE is defined, then a single
+#   work queue is created by default.  If CONFIG_SCHED_LPWORK is also defined
+#   then an additional, lower-priority work queue will also be created.  This
+#   lower priority work queue is better suited for more extended processing
+#   (such as file system clean-up operations)
+# CONFIG_SCHED_LPWORKPRIORITY - The execution priority of the lower priority
+#   worker thread.  Default: 50
+# CONFIG_SCHED_LPWORKPERIOD - How often the lower priority worker thread
+#  checks for work in units of microseconds.  Default: 50*1000 (50 MS).
+# CONFIG_SCHED_LPWORKSTACKSIZE - The stack size allocated for the lower
+#   priority worker thread.  Default: CONFIG_IDLETHREAD_STACKSIZE.
+# CONFIG_SCHED_WAITPID - Enable the waitpid() API
+# CONFIG_SCHED_ATEXIT - Enabled the atexit() API
+#
+CONFIG_USER_ENTRYPOINT="nsh_main"
+#CONFIG_APPS_DIR=
+CONFIG_DEBUG=y
+CONFIG_DEBUG_VERBOSE=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEBUG_FS=n
+CONFIG_DEBUG_GRAPHICS=n
+CONFIG_DEBUG_LCD=n
+CONFIG_DEBUG_USB=n
+CONFIG_DEBUG_NET=n
+CONFIG_DEBUG_RTC=n
+CONFIG_DEBUG_ANALOG=n
+CONFIG_DEBUG_PWM=n
+CONFIG_DEBUG_CAN=n
+CONFIG_DEBUG_I2C=n
+CONFIG_DEBUG_INPUT=n
+
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_MM_REGIONS=2
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_MSEC_PER_TICK=1
+CONFIG_RR_INTERVAL=0
+CONFIG_SCHED_INSTRUMENTATION=y
+CONFIG_TASK_NAME_SIZE=24
+CONFIG_START_YEAR=1970
+CONFIG_START_MONTH=1
+CONFIG_START_DAY=1
+CONFIG_GREGORIAN_TIME=n
+CONFIG_JULIAN_TIME=n
+CONFIG_DEV_CONSOLE=y
+CONFIG_DEV_LOWCONSOLE=y
+CONFIG_MUTEX_TYPES=n
+CONFIG_PRIORITY_INHERITANCE=y
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=y
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SCHED_WORKQUEUE=y
+CONFIG_SCHED_WORKPRIORITY=192
+CONFIG_SCHED_WORKPERIOD=5000
+CONFIG_SCHED_WORKSTACKSIZE=2048
+CONFIG_SCHED_LPWORK=y
+CONFIG_SCHED_LPWORKPRIORITY=50
+CONFIG_SCHED_LPWORKPERIOD=50000
+CONFIG_SCHED_LPWORKSTACKSIZE=2048
+CONFIG_SIG_SIGWORK=4
+CONFIG_SCHED_WAITPID=y
+CONFIG_SCHED_ATEXIT=n
+
+#
+# System Logging
+#
+# CONFIG_SYSLOG - Enables the System Logging feature.
+# CONFIG_RAMLOG - Enables the RAM logging feature
+# CONFIG_RAMLOG_CONSOLE - Use the RAM logging device as a system console.
+#   If this feature is enabled (along with CONFIG_DEV_CONSOLE), then all
+#   console output will be re-directed to a circular buffer in RAM.  This
+#   is useful, for example, if the only console is a Telnet console.  Then
+#   in that case, console output from non-Telnet threads will go to the
+#   circular buffer and can be viewed using the NSH 'dmesg' command.
+# CONFIG_RAMLOG_SYSLOG - Use the RAM logging device for the syslogging
+#   interface.  If this feature is enabled (along with CONFIG_SYSLOG),
+#   then all debug output (only) will be re-directed to the circular
+#   buffer in RAM.  This RAM log can be view from NSH using the 'dmesg'
+#   command.
+# CONFIG_RAMLOG_NPOLLWAITERS - The number of threads than can be waiting
+#   for this driver on poll().  Default: 4
+#
+# If CONFIG_RAMLOG_CONSOLE or CONFIG_RAMLOG_SYSLOG is selected, then the
+# following may also be provided:
+#
+# CONFIG_RAMLOG_CONSOLE_BUFSIZE - Size of the console RAM log.  Default: 1024
+#
+
+CONFIG_SYSLOG=n
+CONFIG_RAMLOG=n
+CONFIG_RAMLOG_CONSOLE=n
+CONFIG_RAMLOG_SYSLOG=n
+#CONFIG_RAMLOG_NPOLLWAITERS
+#CONFIG_RAMLOG_CONSOLE_BUFSIZE
+
+#
+# The following can be used to disable categories of
+# APIs supported by the OS.  If the compiler supports
+# weak functions, then it should not be necessary to
+# disable functions unless you want to restrict usage
+# of those APIs.
+#
+# There are certain dependency relationships in these
+# features.
+#
+# o mq_notify logic depends on signals to awaken tasks
+#   waiting for queues to become full or empty.
+# o pthread_condtimedwait() depends on signals to wake
+#   up waiting tasks.
+#
+CONFIG_DISABLE_CLOCK=n
+CONFIG_DISABLE_POSIX_TIMERS=n
+CONFIG_DISABLE_PTHREAD=n
+CONFIG_DISABLE_SIGNALS=n
+CONFIG_DISABLE_MQUEUE=n
+CONFIG_DISABLE_MOUNTPOINT=n
+CONFIG_DISABLE_ENVIRON=n
+CONFIG_DISABLE_POLL=n
+
+#
+# Misc libc settings
+#
+# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
+#   little smaller if we do not support fieldwidthes
+# CONFIG_LIBC_FLOATINGPOINT - Enables printf("%f")
+# CONFIG_LIBC_FIXEDPRECISION - Sets 7 digits after dot for printing:
+#   5.1234567
+# CONFIG_HAVE_LONG_LONG - Enabled printf("%llu)
+#
+CONFIG_NOPRINTF_FIELDWIDTH=n
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_HAVE_LONG_LONG=y
+
+#
+# Allow for architecture optimized implementations
+#
+# The architecture can provide optimized versions of the
+# following to improve system performance
+#
+CONFIG_ARCH_MEMCPY=y
+CONFIG_ARCH_MEMCMP=n
+CONFIG_ARCH_MEMMOVE=n
+CONFIG_ARCH_MEMSET=n
+CONFIG_ARCH_STRCMP=n
+CONFIG_ARCH_STRCPY=n
+CONFIG_ARCH_STRNCPY=n
+CONFIG_ARCH_STRLEN=n
+CONFIG_ARCH_STRNLEN=n
+CONFIG_ARCH_BZERO=n
+
+#
+# Sizes of configurable things (0 disables)
+#
+# CONFIG_MAX_TASKS - The maximum number of simultaneously
+#   active tasks.  This value must be a power of two.
+# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
+#   of parameters that a task may receive (i.e., maxmum value
+#   of 'argc')
+# CONFIG_NPTHREAD_KEYS - The number of items of thread-
+#   specific data that can be retained
+# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
+#   descriptors (one for each open)
+# CONFIG_NFILE_STREAMS - The maximum number of streams that
+#   can be fopen'ed
+# CONFIG_NAME_MAX - The maximum size of a file name.
+# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
+#   on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_STDIO_LINEBUFFER - If standard C buffered I/O is enabled
+#   (CONFIG_STDIO_BUFFER_SIZE > 0), then this option may be added
+#   to force automatic, line-oriented flushing the output buffer
+#   for putc(), fputc(), putchar(), puts(), fputs(), printf(),
+#   fprintf(), and vfprintf().  When a newline is encountered in
+#   the output string, the output buffer will be flushed.  This
+#   (slightly) increases the NuttX footprint but supports the kind
+#   of behavior that people expect for printf().
+# CONFIG_NUNGET_CHARS - Number of characters that can be
+#   buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
+#   structures.  The system manages a pool of preallocated
+#   message structures to minimize dynamic allocations
+# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
+#   a fixed payload size given by this settin (does not include
+#   other message structure overhead.
+# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
+#   can be passed to a watchdog handler
+# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
+#   structures.  The system manages a pool of preallocated
+#   watchdog structures to minimize dynamic allocations
+# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
+#   timer structures.  The system manages a pool of preallocated
+#   timer structures to minimize dynamic allocations.  Set to
+#   zero for all dynamic allocations.
+#
+CONFIG_MAX_TASKS=32
+CONFIG_MAX_TASK_ARGS=8
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=32
+CONFIG_NFILE_STREAMS=25
+CONFIG_NAME_MAX=32
+CONFIG_STDIO_BUFFER_SIZE=256
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=50
+CONFIG_PREALLOC_TIMERS=50
+
+#
+# Filesystem configuration
+#
+# CONFIG_FS_FAT - Enable FAT filesystem support
+# CONFIG_FAT_SECTORSIZE - Max supported sector size
+# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3
+#   file name support.
+# CONFIG_FAT_LFN - Enable FAT long file names.  NOTE:  Microsoft claims
+#   patents on FAT long file name technology.  Please read the
+#   disclaimer in the top-level COPYING file and only enable this
+#   feature if you understand these issues.
+# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the
+#   default, maximum long file name is 255 bytes.  This can eat up
+#   a lot of memory (especially stack space).  If you are willing
+#   to live with some non-standard, short long file names, then
+#   define this value.  A good choice would be the same value as
+#   selected for CONFIG_NAME_MAX which will limit the visibility
+#   of longer file names anyway.
+# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support.
+# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH. 
+#   This must have one of the values of 0xff or 0x00.
+#   Default: 0xff.
+# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
+#   don't both with file chunks smaller than this number of data bytes.
+# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name.
+#   Default: 255.
+# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
+#   don't both with file chunks smaller than this number of data bytes.
+#   Default: 32.
+# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean
+#   packing files together toward the end of the file or, if file are
+#   deleted at the end of the file, clean up can simply mean erasing
+#   the end of FLASH memory so that it can be re-used again.  However,
+#   doing this can also harm the life of the FLASH part because it can
+#   mean that the tail end of the FLASH is re-used too often. This
+#   threshold determines if/when it is worth erased the tail end of FLASH
+#   and making it available for re-use (and possible over-wear).
+#   Default: 8192.
+# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this
+#   option will enable a limited form of memory mapping that is
+#   implemented by copying whole files into memory.
+#
+CONFIG_FS_FAT=y
+CONFIG_FAT_LCNAMES=y
+CONFIG_FAT_LFN=y
+CONFIG_FAT_MAXFNAME=32
+CONFIG_FS_NXFFS=y
+CONFIG_NXFFS_MAXNAMLEN=32
+CONFIG_NXFFS_TAILTHRESHOLD=2048
+CONFIG_NXFFS_PREALLOCATED=y
+CONFIG_FS_ROMFS=y
+CONFIG_FS_BINFS=y
+
+#
+# SPI-based MMC/SD driver
+#
+# CONFIG_MMCSD_NSLOTS
+#   Number of MMC/SD slots supported by the driver
+# CONFIG_MMCSD_READONLY
+#   Provide read-only access (default is read/write)
+# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card.
+#   Default is 20MHz, current setting 24 MHz
+#
+#CONFIG_MMCSD=n
+# XXX need to rejig this for SDIO
+#CONFIG_MMCSD_SPI=y
+#CONFIG_MMCSD_NSLOTS=1
+#CONFIG_MMCSD_READONLY=n
+#CONFIG_MMCSD_SPICLOCK=24000000
+
+#
+# Maintain legacy build behavior (revisit)
+#
+
+CONFIG_MMCSD=y
+#CONFIG_MMCSD_SPI=y
+CONFIG_MMCSD_SDIO=y
+CONFIG_MTD=y
+
+#
+# SPI-based MMC/SD driver
+#
+#CONFIG_MMCSD_NSLOTS=1
+#CONFIG_MMCSD_READONLY=n
+#CONFIG_MMCSD_SPICLOCK=12500000
+
+#
+# STM32 SDIO-based MMC/SD driver
+#
+CONFIG_SDIO_DMA=y
+#CONFIG_SDIO_PRI=128
+#CONFIG_SDIO_DMAPRIO
+#CONFIG_SDIO_WIDTH_D1_ONLY
+CONFIG_MMCSD_MULTIBLOCK_DISABLE=y
+CONFIG_MMCSD_MMCSUPPORT=n
+CONFIG_MMCSD_HAVECARDDETECT=n
+
+#
+# Block driver buffering
+#
+# CONFIG_FS_READAHEAD
+#   Enable read-ahead buffering
+# CONFIG_FS_WRITEBUFFER
+#   Enable write buffering
+#
+CONFIG_FS_READAHEAD=n
+CONFIG_FS_WRITEBUFFER=n
+
+#
+# RTC Configuration
+#
+# CONFIG_RTC - Enables general support for a hardware RTC.  Specific
+#   architectures may require other specific settings.
+# CONFIG_RTC_DATETIME - There are two general types of RTC:  (1) A simple
+#   battery backed counter that keeps the time when power is down, and (2)
+#    A full date / time RTC the provides the date and time information, often
+#   in BCD format.  If CONFIG_RTC_DATETIME is selected, it specifies this
+#   second kind of RTC. In this case, the RTC is used to "seed" the normal
+#   NuttX timer and the NuttX system timer provides for higher resoution
+#   time.
+# CONFIG_RTC_HIRES - If CONFIG_RTC_DATETIME not selected, then the simple,
+#   battery backed counter is used.  There are two different implementations
+#   of such simple counters based on the time resolution of the counter:
+#   The typical RTC keeps time to resolution of 1 second, usually
+#   supporting a 32-bit time_t value.  In this case, the RTC is used to
+#   "seed" the normal NuttX timer and the NuttX timer provides for higher
+#   resoution time. If CONFIG_RTC_HIRES is enabled in the NuttX configuration,
+#   then the RTC provides higher resolution time and completely replaces the
+#   system timer for purpose of date and time.
+# CONFIG_RTC_FREQUENCY - If CONFIG_RTC_HIRES is defined, then the frequency
+#  of the high resolution RTC must be provided.  If CONFIG_RTC_HIRES is
+#   not defined, CONFIG_RTC_FREQUENCY is assumed to be one.
+# CONFIG_RTC_ALARM - Enable if the RTC hardware supports setting of an
+#  alarm.  A callback function will be executed when the alarm goes off
+#
+CONFIG_RTC=n
+CONFIG_RTC_DATETIME=y
+CONFIG_RTC_HIRES=n
+CONFIG_RTC_FREQUENCY=n
+CONFIG_RTC_ALARM=n
+
+#
+# USB Device Configuration
+#
+# CONFIG_USBDEV
+#   Enables USB device support
+# CONFIG_USBDEV_ISOCHRONOUS
+#   Build in extra support for isochronous endpoints
+# CONFIG_USBDEV_DUALSPEED
+#   Hardware handles high and full speed operation (USB 2.0)
+# CONFIG_USBDEV_SELFPOWERED
+#   Will cause USB features to indicate that the device is
+#   self-powered
+# CONFIG_USBDEV_MAXPOWER
+#   Maximum power consumption in mA
+# CONFIG_USBDEV_TRACE
+#   Enables USB tracing for debug
+# CONFIG_USBDEV_TRACE_NRECORDS
+#   Number of trace entries to remember
+#
+CONFIG_USBDEV=y
+CONFIG_USBDEV_ISOCHRONOUS=n
+CONFIG_USBDEV_DUALSPEED=n
+CONFIG_USBDEV_SELFPOWERED=y
+CONFIG_USBDEV_REMOTEWAKEUP=n
+CONFIG_USBDEV_MAXPOWER=500
+CONFIG_USBDEV_TRACE=n
+CONFIG_USBDEV_TRACE_NRECORDS=512
+
+#
+# USB serial device class driver (Standard CDC ACM class)
+#
+# CONFIG_CDCACM
+#   Enable compilation of the USB serial driver
+# CONFIG_CDCACM_CONSOLE
+#   Configures the CDC/ACM serial port as the console device.
+# CONFIG_CDCACM_EP0MAXPACKET
+#   Endpoint 0 max packet size. Default 64
+# CONFIG_CDCACM_EPINTIN
+#   The logical 7-bit address of a hardware endpoint that supports
+#   interrupt IN operation.  Default 2.
+# CONFIG_CDCACM_EPINTIN_FSSIZE
+#   Max package size for the interrupt IN endpoint if full speed mode.
+#   Default 64.
+# CONFIG_CDCACM_EPINTIN_HSSIZE
+#   Max package size for the interrupt IN endpoint if high speed mode.
+#   Default 64
+# CONFIG_CDCACM_EPBULKOUT
+#   The logical 7-bit address of a hardware endpoint that supports
+#   bulk OUT operation.  Default 4.
+# CONFIG_CDCACM_EPBULKOUT_FSSIZE
+#   Max package size for the bulk OUT endpoint if full speed mode.
+#   Default 64.
+# CONFIG_CDCACM_EPBULKOUT_HSSIZE
+#   Max package size for the bulk OUT  endpoint if high speed mode.
+#   Default 512.
+# CONFIG_CDCACM_EPBULKIN
+#   The logical 7-bit address of a hardware endpoint that supports
+#   bulk IN operation.  Default 3.
+# CONFIG_CDCACM_EPBULKIN_FSSIZE
+#   Max package size for the bulk IN endpoint if full speed mode.
+#   Default 64.
+# CONFIG_CDCACM_EPBULKIN_HSSIZE
+#   Max package size for the bulk IN  endpoint if high speed mode.
+#   Default 512.
+# CONFIG_CDCACM_NWRREQS and CONFIG_CDCACM_NRDREQS
+#   The number of write/read requests that can be in flight.
+#   Default 256.
+# CONFIG_CDCACM_VENDORID and CONFIG_CDCACM_VENDORSTR
+#   The vendor ID code/string.  Default 0x0525 and "NuttX"
+#   0x0525 is the Netchip vendor and should not be used in any
+#   products.  This default VID was selected for compatibility with
+#   the Linux CDC ACM default VID.
+# CONFIG_CDCACM_PRODUCTID and CONFIG_CDCACM_PRODUCTSTR
+#   The product ID code/string. Default 0xa4a7 and "CDC/ACM Serial"
+#   0xa4a7 was selected for compatibility with the Linux CDC ACM
+#   default PID.
+# CONFIG_CDCACM_RXBUFSIZE and CONFIG_CDCACM_TXBUFSIZE
+#   Size of the serial receive/transmit buffers. Default 256.
+#
+CONFIG_CDCACM=y
+CONFIG_CDCACM_CONSOLE=n
+#CONFIG_CDCACM_EP0MAXPACKET
+CONFIG_CDCACM_EPINTIN=1
+#CONFIG_CDCACM_EPINTIN_FSSIZE
+#CONFIG_CDCACM_EPINTIN_HSSIZE
+CONFIG_CDCACM_EPBULKOUT=3
+#CONFIG_CDCACM_EPBULKOUT_FSSIZE
+#CONFIG_CDCACM_EPBULKOUT_HSSIZE
+CONFIG_CDCACM_EPBULKIN=2
+#CONFIG_CDCACM_EPBULKIN_FSSIZE
+#CONFIG_CDCACM_EPBULKIN_HSSIZE
+#CONFIG_CDCACM_NWRREQS
+#CONFIG_CDCACM_NRDREQS
+CONFIG_CDCACM_VENDORID=0x26AC
+CONFIG_CDCACM_VENDORSTR="3D Robotics"
+CONFIG_CDCACM_PRODUCTID=0x0010
+CONFIG_CDCACM_PRODUCTSTR="PX4 FMU v1.6"
+#CONFIG_CDCACM_RXBUFSIZE
+#CONFIG_CDCACM_TXBUFSIZE
+
+
+#
+# Settings for apps/nshlib
+#
+# CONFIG_NSH_BUILTIN_APPS - Support external registered,
+#   "named" applications that can be executed from the NSH
+#   command line (see apps/README.txt for more information).
+# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer
+# CONFIG_NSH_STRERROR - Use strerror(errno)
+# CONFIG_NSH_LINELEN - Maximum length of one command line
+# CONFIG_NSH_MAX_ARGUMENTS - Maximum number of arguments for command line
+# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
+# CONFIG_NSH_DISABLESCRIPT - Disable scripting support
+# CONFIG_NSH_DISABLEBG - Disable background commands
+# CONFIG_NSH_ROMFSETC - Use startup script in /etc
+# CONFIG_NSH_CONSOLE - Use serial console front end
+# CONFIG_NSH_TELNET - Use telnetd console front end
+# CONFIG_NSH_ARCHINIT - Platform provides architecture
+#   specific initialization (nsh_archinitialize()).
+#
+# If CONFIG_NSH_TELNET is selected:
+# CONFIG_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size
+# CONFIG_NSH_DHCPC - Obtain address using DHCP
+# CONFIG_NSH_IPADDR - Provides static IP address
+# CONFIG_NSH_DRIPADDR - Provides static router IP address
+# CONFIG_NSH_NETMASK - Provides static network mask
+# CONFIG_NSH_NOMAC - Use a bogus MAC address
+#
+# If CONFIG_NSH_ROMFSETC is selected:
+# CONFIG_NSH_ROMFSMOUNTPT - ROMFS mountpoint
+# CONFIG_NSH_INITSCRIPT - Relative path to init script
+# CONFIG_NSH_ROMFSDEVNO - ROMFS RAM device minor
+# CONFIG_NSH_ROMFSSECTSIZE - ROMF sector size
+# CONFIG_NSH_FATDEVNO - FAT FS RAM device minor
+# CONFIG_NSH_FATSECTSIZE - FAT FS sector size
+# CONFIG_NSH_FATNSECTORS - FAT FS number of sectors
+# CONFIG_NSH_FATMOUNTPT - FAT FS mountpoint
+#
+CONFIG_BUILTIN=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_STRERROR=y
+CONFIG_NSH_LINELEN=128
+CONFIG_NSH_MAX_ARGUMENTS=12
+CONFIG_NSH_NESTDEPTH=8
+CONFIG_NSH_DISABLESCRIPT=n
+CONFIG_NSH_DISABLEBG=n
+CONFIG_NSH_ROMFSETC=y
+CONFIG_NSH_ARCHROMFS=y
+CONFIG_NSH_CONSOLE=y
+CONFIG_NSH_USBCONSOLE=n
+#CONFIG_NSH_USBCONDEV="/dev/ttyACM0"
+CONFIG_NSH_TELNET=n
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_IOBUFFER_SIZE=512
+CONFIG_NSH_DHCPC=n
+CONFIG_NSH_NOMAC=y
+CONFIG_NSH_IPADDR=0x0a000002
+CONFIG_NSH_DRIPADDR=0x0a000001
+CONFIG_NSH_NETMASK=0xffffff00
+CONFIG_NSH_ROMFSMOUNTPT="/etc"
+CONFIG_NSH_INITSCRIPT="init.d/rcS"
+CONFIG_NSH_ROMFSDEVNO=0
+CONFIG_NSH_ROMFSSECTSIZE=128 # Default 64, increased to allow for more than 64 folders on the sdcard
+CONFIG_NSH_FATDEVNO=1
+CONFIG_NSH_FATSECTSIZE=512
+CONFIG_NSH_FATNSECTORS=1024
+CONFIG_NSH_FATMOUNTPT=/tmp
+
+#
+# Architecture-specific NSH options
+#
+#CONFIG_NSH_MMCSDSPIPORTNO=3
+CONFIG_NSH_MMCSDSLOTNO=0
+CONFIG_NSH_MMCSDMINOR=0
+
+
+#
+# Stack and heap information
+#
+# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP
+#   operation from FLASH but must copy initialized .data sections to RAM.
+#   (should also be =n for the STM3240G-EVAL which always runs from flash)
+# CONFIG_BOOT_COPYTORAM -  Some configurations boot in FLASH
+#   but copy themselves entirely into RAM for better performance.
+# CONFIG_CUSTOM_STACK - The up_ implementation will handle
+#   all stack operations outside of the nuttx model.
+# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
+# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
+#  This is the thread that (1) performs the inital boot of the system up
+#  to the point where user_start() is spawned, and (2) there after is the
+#  IDLE thread that executes only when there is no other thread ready to
+#  run.
+# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
+#  for the main user thread that begins at the user_start() entry point.
+# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
+# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
+# CONFIG_HEAP_BASE - The beginning of the heap
+# CONFIG_HEAP_SIZE - The size of the heap
+#
+CONFIG_BOOT_RUNFROMFLASH=n
+CONFIG_BOOT_COPYTORAM=n
+CONFIG_CUSTOM_STACK=n
+CONFIG_STACK_POINTER=
+# Idle thread needs 4096 bytes
+# default 1 KB is not enough
+# 4096 bytes 
+CONFIG_IDLETHREAD_STACKSIZE=6000
+# USERMAIN stack size probably needs to be around 4096 bytes
+CONFIG_USERMAIN_STACKSIZE=4096
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+CONFIG_HEAP_BASE=
+CONFIG_HEAP_SIZE=
+
+# enable bindir 
+CONFIG_APPS_BINDIR=y
diff --git a/nuttx-configs/px4fmu-v2/nsh/setenv.sh b/nuttx-configs/px4fmu-v2/nsh/setenv.sh
new file mode 100755
index 000000000..265520997
--- /dev/null
+++ b/nuttx-configs/px4fmu-v2/nsh/setenv.sh
@@ -0,0 +1,67 @@
+#!/bin/bash
+# configs/stm3240g-eval/nsh/setenv.sh
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$_" = "$0" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+WD=`pwd`
+if [ ! -x "setenv.sh" ]; then
+  echo "This script must be executed from the top-level NuttX build directory"
+  exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then
+  export PATH_ORIG="${PATH}"
+fi
+
+# This the Cygwin path to the location where I installed the RIDE
+# toolchain under windows.  You will also have to edit this if you install
+# the RIDE toolchain in any other location
+#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
+
+# This the Cygwin path to the location where I installed the CodeSourcery
+# toolchain under windows.  You will also have to edit this if you install
+# the CodeSourcery toolchain in any other location
+export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
+
+# This the Cygwin path to the location where I build the buildroot
+# toolchain.
+#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+
+# Add the path to the toolchain to the PATH varialble
+export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"
diff --git a/nuttx-configs/px4fmu-v2/src/Makefile b/nuttx-configs/px4fmu-v2/src/Makefile
new file mode 100644
index 000000000..d4276f7fc
--- /dev/null
+++ b/nuttx-configs/px4fmu-v2/src/Makefile
@@ -0,0 +1,84 @@
+############################################################################
+# configs/px4fmu/src/Makefile
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+-include $(TOPDIR)/Make.defs
+
+CFLAGS		+= -I$(TOPDIR)/sched
+
+ASRCS		= 
+AOBJS		= $(ASRCS:.S=$(OBJEXT))
+
+CSRCS		= empty.c
+COBJS		= $(CSRCS:.c=$(OBJEXT))
+
+SRCS		= $(ASRCS) $(CSRCS)
+OBJS		= $(AOBJS) $(COBJS)
+
+ARCH_SRCDIR	= $(TOPDIR)/arch/$(CONFIG_ARCH)/src
+ifeq ($(WINTOOL),y)
+  CFLAGS	+= -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
+  		   -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
+  		   -I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}"
+else
+  CFLAGS	+= -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m
+endif
+
+all: libboard$(LIBEXT)
+
+$(AOBJS): %$(OBJEXT): %.S
+	$(call ASSEMBLE, $<, $@)
+
+$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
+	$(call COMPILE, $<, $@)
+
+libboard$(LIBEXT): $(OBJS)
+	$(call ARCHIVE, $@, $(OBJS))
+
+.depend: Makefile $(SRCS)
+	$(Q) $(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
+	$(Q) touch $@
+
+depend: .depend
+
+clean:
+	$(call DELFILE, libboard$(LIBEXT))
+	$(call CLEAN)
+
+distclean: clean
+	$(call DELFILE, Make.dep)
+	$(call DELFILE, .depend)
+
+-include Make.dep
+
diff --git a/nuttx-configs/px4fmu-v2/src/empty.c b/nuttx-configs/px4fmu-v2/src/empty.c
new file mode 100644
index 000000000..ace900866
--- /dev/null
+++ b/nuttx-configs/px4fmu-v2/src/empty.c
@@ -0,0 +1,4 @@
+/*
+ * There are no source files here, but libboard.a can't be empty, so 
+ * we have this empty source file to keep it company.
+ */
diff --git a/nuttx-configs/px4io-v2/README.txt b/nuttx-configs/px4io-v2/README.txt
new file mode 100755
index 000000000..9b1615f42
--- /dev/null
+++ b/nuttx-configs/px4io-v2/README.txt
@@ -0,0 +1,806 @@
+README
+======
+
+This README discusses issues unique to NuttX configurations for the
+STMicro STM3210E-EVAL development board.
+
+Contents
+========
+
+  - Development Environment
+  - GNU Toolchain Options
+  - IDEs
+  - NuttX buildroot Toolchain
+  - DFU and JTAG
+  - OpenOCD
+  - LEDs
+  - Temperature Sensor
+  - RTC
+  - STM3210E-EVAL-specific Configuration Options
+  - Configurations
+
+Development Environment
+=======================
+
+  Either Linux or Cygwin on Windows can be used for the development environment.
+  The source has been built only using the GNU toolchain (see below).  Other
+  toolchains will likely cause problems. Testing was performed using the Cygwin
+  environment because the Raisonance R-Link emulatator and some RIDE7 development tools
+  were used and those tools works only under Windows.
+
+GNU Toolchain Options
+=====================
+
+  The NuttX make system has been modified to support the following different
+  toolchain options.
+
+  1. The CodeSourcery GNU toolchain,
+  2. The devkitARM GNU toolchain,
+  3. Raisonance GNU toolchain, or
+  4. The NuttX buildroot Toolchain (see below).
+
+  All testing has been conducted using the NuttX buildroot toolchain.  However,
+  the make system is setup to default to use the devkitARM toolchain.  To use
+  the CodeSourcery, devkitARM or Raisonance GNU toolchain, you simply need to
+  add one of the following configuration options to your .config (or defconfig)
+  file:
+
+    CONFIG_STM32_CODESOURCERYW=y  : CodeSourcery under Windows
+    CONFIG_STM32_CODESOURCERYL=y  : CodeSourcery under Linux
+    CONFIG_STM32_DEVKITARM=y      : devkitARM under Windows
+    CONFIG_STM32_RAISONANCE=y     : Raisonance RIDE7 under Windows
+    CONFIG_STM32_BUILDROOT=y      : NuttX buildroot under Linux or Cygwin (default)
+
+  If you are not using CONFIG_STM32_BUILDROOT, then you may also have to modify
+  the PATH in the setenv.h file if your make cannot find the tools.
+
+  NOTE: the CodeSourcery (for Windows), devkitARM, and Raisonance toolchains are
+  Windows native toolchains.  The CodeSourcey (for Linux) and NuttX buildroot
+  toolchains are Cygwin and/or Linux native toolchains. There are several limitations
+  to using a Windows based toolchain in a Cygwin environment.  The three biggest are:
+
+  1. The Windows toolchain cannot follow Cygwin paths.  Path conversions are
+     performed automatically in the Cygwin makefiles using the 'cygpath' utility
+     but you might easily find some new path problems.  If so, check out 'cygpath -w'
+
+  2. Windows toolchains cannot follow Cygwin symbolic links.  Many symbolic links
+     are used in Nuttx (e.g., include/arch).  The make system works around these
+     problems for the Windows tools by copying directories instead of linking them.
+     But this can also cause some confusion for you:  For example, you may edit
+     a file in a "linked" directory and find that your changes had no effect.
+     That is because you are building the copy of the file in the "fake" symbolic
+     directory.  If you use a Windows toolchain, you should get in the habit of
+     making like this:
+
+       make clean_context all
+
+     An alias in your .bashrc file might make that less painful.
+
+  3. Dependencies are not made when using Windows versions of the GCC.  This is
+     because the dependencies are generated using Windows pathes which do not
+     work with the Cygwin make.
+
+     Support has been added for making dependencies with the windows-native toolchains.
+     That support can be enabled by modifying your Make.defs file as follows:
+
+    -  MKDEP                = $(TOPDIR)/tools/mknulldeps.sh
+    +  MKDEP                = $(TOPDIR)/tools/mkdeps.sh --winpaths "$(TOPDIR)"
+
+     If you have problems with the dependency build (for example, if you are not
+     building on C:), then you may need to modify tools/mkdeps.sh
+
+  NOTE 1: The CodeSourcery toolchain (2009q1) does not work with default optimization
+  level of -Os (See Make.defs).  It will work with -O0, -O1, or -O2, but not with
+  -Os.
+
+  NOTE 2: The devkitARM toolchain includes a version of MSYS make.  Make sure that
+  the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM
+  path or will get the wrong version of make.
+
+IDEs
+====
+
+  NuttX is built using command-line make.  It can be used with an IDE, but some
+  effort will be required to create the project (There is a simple RIDE project
+  in the RIDE subdirectory).
+  
+  Makefile Build
+  --------------
+  Under Eclipse, it is pretty easy to set up an "empty makefile project" and
+  simply use the NuttX makefile to build the system.  That is almost for free
+  under Linux.  Under Windows, you will need to set up the "Cygwin GCC" empty
+  makefile project in order to work with Windows (Google for "Eclipse Cygwin" -
+  there is a lot of help on the internet).
+
+  Native Build
+  ------------
+  Here are a few tips before you start that effort:
+
+  1) Select the toolchain that you will be using in your .config file
+  2) Start the NuttX build at least one time from the Cygwin command line
+     before trying to create your project.  This is necessary to create
+     certain auto-generated files and directories that will be needed.
+  3) Set up include pathes:  You will need include/, arch/arm/src/stm32,
+     arch/arm/src/common, arch/arm/src/armv7-m, and sched/.
+  4) All assembly files need to have the definition option -D __ASSEMBLY__
+     on the command line.
+
+  Startup files will probably cause you some headaches.  The NuttX startup file
+  is arch/arm/src/stm32/stm32_vectors.S.  With RIDE, I have to build NuttX
+  one time from the Cygwin command line in order to obtain the pre-built
+  startup object needed by RIDE.
+
+NuttX buildroot Toolchain
+=========================
+
+  A GNU GCC-based toolchain is assumed.  The files */setenv.sh should
+  be modified to point to the correct path to the Cortex-M3 GCC toolchain (if
+  different from the default in your PATH variable).
+
+  If you have no Cortex-M3 toolchain, one can be downloaded from the NuttX
+  SourceForge download site (https://sourceforge.net/project/showfiles.php?group_id=189573).
+  This GNU toolchain builds and executes in the Linux or Cygwin environment.
+
+  1. You must have already configured Nuttx in <some-dir>/nuttx.
+
+     cd tools
+     ./configure.sh stm3210e-eval/<sub-dir>
+
+  2. Download the latest buildroot package into <some-dir>
+
+  3. unpack the buildroot tarball.  The resulting directory may
+     have versioning information on it like buildroot-x.y.z.  If so,
+     rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot.
+
+  4. cd <some-dir>/buildroot
+
+  5. cp configs/cortexm3-defconfig-4.3.3 .config
+
+  6. make oldconfig
+
+  7. make
+
+  8. Edit setenv.h, if necessary, so that the PATH variable includes
+     the path to the newly built binaries.
+
+  See the file configs/README.txt in the buildroot source tree.  That has more
+  detailed PLUS some special instructions that you will need to follow if you are
+  building a Cortex-M3 toolchain for Cygwin under Windows.
+
+DFU and JTAG
+============
+
+  Enbling Support for the DFU Bootloader
+  --------------------------------------
+  The linker files in these projects can be configured to indicate that you
+  will be loading code using STMicro built-in USB Device Firmware Upgrade (DFU)
+  loader or via some JTAG emulator.  You can specify the DFU bootloader by
+  adding the following line:
+
+    CONFIG_STM32_DFU=y
+
+  to your .config file. Most of the configurations in this directory are set
+  up to use the DFU loader.
+
+  If CONFIG_STM32_DFU is defined, the code will not be positioned at the beginning
+  of FLASH (0x08000000) but will be offset to 0x08003000.  This offset is needed
+  to make space for the DFU loader and 0x08003000 is where the DFU loader expects
+  to find new applications at boot time.  If you need to change that origin for some
+  other bootloader, you will need to edit the file(s) ld.script.dfu for each
+  configuration.
+
+  The DFU SE PC-based software is available from the STMicro website,
+  http://www.st.com.  General usage instructions:
+  
+  1. Convert the NuttX Intel Hex file (nuttx.ihx) into a special DFU
+     file (nuttx.dfu)... see below for details.
+  2. Connect the STM3210E-EVAL board to your computer using a USB
+     cable.
+  3. Start the DFU loader on the STM3210E-EVAL board.  You do this by
+     resetting the board while holding the "Key" button.  Windows should
+     recognize that the DFU loader has been installed.
+  3. Run the DFU SE program to load nuttx.dfu into FLASH.
+
+  What if the DFU loader is not in FLASH?  The loader code is available
+  inside of the Demo dirctory of the USBLib ZIP file that can be downloaded
+  from the STMicro Website.  You can build it using RIDE (or other toolchains);
+  you will need a JTAG emulator to burn it into FLASH the first time.
+
+  In order to use STMicro's built-in DFU loader, you will have to get
+  the NuttX binary into a special format with a .dfu extension.  The
+  DFU SE PC_based software installation includes a file "DFU File Manager"
+  conversion program that a file in Intel Hex format to the special DFU
+  format.  When you successfully build NuttX, you will find a file called
+  nutt.ihx in the top-level directory.  That is the file that you should
+  provide to the DFU File Manager.  You will need to rename it to nuttx.hex
+  in order to find it with the DFU File Manager. You will end up with
+  a file called nuttx.dfu that you can use with the STMicro DFU SE program.
+
+  Enabling JTAG
+  -------------
+  If you are not using the DFU, then you will probably also need to enable
+  JTAG support.  By default, all JTAG support is disabled but there NuttX
+  configuration options to enable JTAG in various different ways.
+
+  These configurations effect the setting of the SWJ_CFG[2:0] bits in the AFIO
+  MAPR register.  These bits are used to configure the SWJ and trace alternate function I/Os. The SWJ (SerialWire JTAG) supports JTAG or SWD access to the
+  Cortex debug port.  The default state in this port is for all JTAG support
+  to be disable.
+
+  CONFIG_STM32_JTAG_FULL_ENABLE - sets SWJ_CFG[2:0] to 000 which enables full
+    SWJ (JTAG-DP + SW-DP)
+
+  CONFIG_STM32_JTAG_NOJNTRST_ENABLE - sets SWJ_CFG[2:0] to 001 which enable
+    full SWJ (JTAG-DP + SW-DP) but without JNTRST.
+
+  CONFIG_STM32_JTAG_SW_ENABLE - sets SWJ_CFG[2:0] to 010 which would set JTAG-DP
+    disabled and SW-DP enabled
+
+  The default setting (none of the above defined) is SWJ_CFG[2:0] set to 100
+  which disable JTAG-DP and SW-DP.
+
+OpenOCD
+=======
+
+I have also used OpenOCD with the STM3210E-EVAL.  In this case, I used
+the Olimex USB ARM OCD.  See the script in configs/stm3210e-eval/tools/oocd.sh
+for more information.  Using the script:
+
+1) Start the OpenOCD GDB server
+
+   cd <nuttx-build-directory>
+   configs/stm3210e-eval/tools/oocd.sh $PWD
+
+2) Load Nuttx
+
+   cd <nuttx-built-directory>
+   arm-none-eabi-gdb nuttx
+   gdb> target remote localhost:3333
+   gdb> mon reset
+   gdb> mon halt
+   gdb> load nuttx
+
+3) Running NuttX
+
+   gdb> mon reset
+   gdb> c
+
+LEDs
+====
+
+The STM3210E-EVAL board has four LEDs labeled LD1, LD2, LD3 and LD4 on the
+board.. These LEDs are not used by the board port unless CONFIG_ARCH_LEDS is
+defined.  In that case, the usage by the board port is defined in
+include/board.h and src/up_leds.c. The LEDs are used to encode OS-related
+events as follows:
+
+    SYMBOL           Meaning                 LED1* LED2  LED3  LED4
+    ---------------- ----------------------- ----- ----- ----- -----
+    LED_STARTED      NuttX has been started  ON    OFF   OFF   OFF
+    LED_HEAPALLOCATE Heap has been allocated OFF   ON    OFF   OFF
+    LED_IRQSENABLED  Interrupts enabled      ON    ON    OFF   OFF
+    LED_STACKCREATED Idle stack created      OFF   OFF   ON    OFF
+    LED_INIRQ        In an interrupt**       ON    N/C   N/C   OFF
+    LED_SIGNAL       In a signal handler***  N/C   ON    N/C   OFF
+    LED_ASSERTION    An assertion failed     ON    ON    N/C   OFF
+    LED_PANIC        The system has crashed  N/C   N/C   N/C   ON
+    LED_IDLE         STM32 is is sleep mode  (Optional, not used)
+
+  * If LED1, LED2, LED3 are statically on, then NuttX probably failed to boot
+    and these LEDs will give you some indication of where the failure was
+ ** The normal state is LED3 ON and LED1 faintly glowing.  This faint glow
+    is because of timer interupts that result in the LED being illuminated
+    on a small proportion of the time.
+*** LED2 may also flicker normally if signals are processed.
+
+Temperature Sensor
+==================
+
+Support for the on-board LM-75 temperature sensor is available.  This supported
+has been verified, but has not been included in any of the available the
+configurations.  To set up the temperature sensor, add the following to the
+NuttX configuration file
+
+  CONFIG_I2C=y
+  CONFIG_I2C_LM75=y
+
+Then you can implement logic like the following to use the temperature sensor:
+
+  #include <nuttx/sensors/lm75.h>
+  #include <arch/board/board.h>
+
+  ret =  stm32_lm75initialize("/dev/temp");       /* Register the temperature sensor */
+  fd = open("/dev/temp", O_RDONLY);               /* Open the temperature sensor device */
+  ret = ioctl(fd, SNIOC_FAHRENHEIT, 0);           /* Select Fahrenheit */
+  bytesread = read(fd, buffer, 8*sizeof(b16_t));  /* Read temperature samples */
+
+More complex temperature sensor operations are also available.  See the IOCTAL
+commands enumerated in include/nuttx/sensors/lm75.h.  Also read the descriptions
+of the stm32_lm75initialize() and stm32_lm75attach() interfaces in the
+arch/board/board.h file (sames as configs/stm3210e-eval/include/board.h).
+
+RTC
+===
+
+  The STM32 RTC may configured using the following settings.
+
+    CONFIG_RTC - Enables general support for a hardware RTC. Specific
+      architectures may require other specific settings.
+    CONFIG_RTC_HIRES - The typical RTC keeps time to resolution of 1
+      second, usually supporting a 32-bit time_t value.  In this case,
+      the RTC is used to &quot;seed&quot; the normal NuttX timer and the
+      NuttX timer provides for higher resoution time. If CONFIG_RTC_HIRES
+      is enabled in the NuttX configuration, then the RTC provides higher
+      resolution time and completely replaces the system timer for purpose of
+      date and time.
+      CONFIG_RTC_FREQUENCY - If CONFIG_RTC_HIRES is defined, then the
+      frequency of the high resolution RTC must be provided.  If CONFIG_RTC_HIRES
+      is not defined, CONFIG_RTC_FREQUENCY is assumed to be one.
+    CONFIG_RTC_ALARM - Enable if the RTC hardware supports setting of an alarm. 
+      A callback function will be executed when the alarm goes off
+
+  In hi-res mode, the STM32 RTC operates only at 16384Hz.  Overflow interrupts
+  are handled when the 32-bit RTC counter overflows every 3 days and 43 minutes.
+  A BKP register is incremented on each overflow interrupt creating, effectively,
+  a 48-bit RTC counter.
+
+  In the lo-res mode, the RTC operates at 1Hz.  Overflow interrupts are not handled
+  (because the next overflow is not expected until the year 2106.
+
+   WARNING:  Overflow interrupts are lost whenever the STM32 is powered down.  The
+   overflow interrupt may be lost even if the STM32 is powered down only momentarily.
+   Therefore hi-res solution is only useful in systems where the power is always on.
+
+STM3210E-EVAL-specific Configuration Options
+============================================
+
+    CONFIG_ARCH - Identifies the arch/ subdirectory.  This should
+       be set to:
+
+       CONFIG_ARCH=arm
+
+    CONFIG_ARCH_family - For use in C code:
+
+       CONFIG_ARCH_ARM=y
+
+    CONFIG_ARCH_architecture - For use in C code:
+
+       CONFIG_ARCH_CORTEXM3=y
+
+    CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
+
+       CONFIG_ARCH_CHIP=stm32
+
+    CONFIG_ARCH_CHIP_name - For use in C code to identify the exact
+       chip:
+
+       CONFIG_ARCH_CHIP_STM32F103ZET6
+
+    CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG - Enables special STM32 clock
+       configuration features.
+
+       CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG=n
+ 
+    CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
+       hence, the board that supports the particular chip or SoC.
+
+       CONFIG_ARCH_BOARD=stm3210e_eval (for the STM3210E-EVAL development board)
+
+    CONFIG_ARCH_BOARD_name - For use in C code
+
+       CONFIG_ARCH_BOARD_STM3210E_EVAL=y
+
+    CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation
+       of delay loops
+
+    CONFIG_ENDIAN_BIG - define if big endian (default is little
+       endian)
+
+    CONFIG_DRAM_SIZE - Describes the installed DRAM (SRAM in this case):
+
+       CONFIG_DRAM_SIZE=0x00010000 (64Kb)
+
+    CONFIG_DRAM_START - The start address of installed DRAM
+
+       CONFIG_DRAM_START=0x20000000
+
+    CONFIG_DRAM_END - Last address+1 of installed RAM
+
+       CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
+
+    CONFIG_ARCH_IRQPRIO - The STM32F103Z supports interrupt prioritization
+
+       CONFIG_ARCH_IRQPRIO=y
+
+    CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
+       have LEDs
+
+    CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
+       stack. If defined, this symbol is the size of the interrupt
+        stack in bytes.  If not defined, the user task stacks will be
+      used during interrupt handling.
+
+    CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
+
+    CONFIG_ARCH_LEDS -  Use LEDs to show state. Unique to board architecture.
+
+    CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
+       cause a 100 second delay during boot-up.  This 100 second delay
+       serves no purpose other than it allows you to calibratre
+       CONFIG_ARCH_LOOPSPERMSEC.  You simply use a stop watch to measure
+       the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
+       the delay actually is 100 seconds.
+
+  Individual subsystems can be enabled:
+    AHB
+    ---
+    CONFIG_STM32_DMA1
+    CONFIG_STM32_DMA2
+    CONFIG_STM32_CRC
+    CONFIG_STM32_FSMC
+    CONFIG_STM32_SDIO
+
+    APB1
+    ----
+    CONFIG_STM32_TIM2
+    CONFIG_STM32_TIM3
+    CONFIG_STM32_TIM4
+    CONFIG_STM32_TIM5
+    CONFIG_STM32_TIM6
+    CONFIG_STM32_TIM7
+    CONFIG_STM32_WWDG
+    CONFIG_STM32_SPI2
+    CONFIG_STM32_SPI4
+    CONFIG_STM32_USART2
+    CONFIG_STM32_USART3
+    CONFIG_STM32_UART4
+    CONFIG_STM32_UART5
+    CONFIG_STM32_I2C1
+    CONFIG_STM32_I2C2
+    CONFIG_STM32_USB
+    CONFIG_STM32_CAN
+    CONFIG_STM32_BKP
+    CONFIG_STM32_PWR
+    CONFIG_STM32_DAC1
+    CONFIG_STM32_DAC2
+    CONFIG_STM32_USB
+
+    APB2
+    ----
+    CONFIG_STM32_ADC1
+    CONFIG_STM32_ADC2
+    CONFIG_STM32_TIM1
+    CONFIG_STM32_SPI1
+    CONFIG_STM32_TIM8
+    CONFIG_STM32_USART1
+    CONFIG_STM32_ADC3
+
+  Timer and I2C devices may need to the following to force power to be applied
+  unconditionally at power up.  (Otherwise, the device is powered when it is
+  initialized).
+
+    CONFIG_STM32_FORCEPOWER
+
+  Timer devices may be used for different purposes.  One special purpose is
+  to generate modulated outputs for such things as motor control.  If CONFIG_STM32_TIMn
+  is defined (as above) then the following may also be defined to indicate that
+  the timer is intended to be used for pulsed output modulation, ADC conversion,
+  or DAC conversion.  Note that ADC/DAC require two definition:  Not only do you have
+  to assign the timer (n) for used by the ADC or DAC, but then you also have to
+  configure which ADC or DAC (m) it is assigned to.
+
+    CONFIG_STM32_TIMn_PWM   Reserve timer n for use by PWM, n=1,..,8
+    CONFIG_STM32_TIMn_ADC   Reserve timer n for use by ADC, n=1,..,8
+    CONFIG_STM32_TIMn_ADCm  Reserve timer n to trigger ADCm, n=1,..,8, m=1,..,3
+    CONFIG_STM32_TIMn_DAC   Reserve timer n for use by DAC, n=1,..,8
+    CONFIG_STM32_TIMn_DACm  Reserve timer n to trigger DACm, n=1,..,8, m=1,..,2
+
+  For each timer that is enabled for PWM usage, we need the following additional
+  configuration settings:
+
+    CONFIG_STM32_TIMx_CHANNEL - Specifies the timer output channel {1,..,4}
+ 
+  NOTE: The STM32 timers are each capable of generating different signals on
+  each of the four channels with different duty cycles.  That capability is
+  not supported by this driver:  Only one output channel per timer.
+
+  Alternate pin mappings (should not be used with the STM3210E-EVAL board):
+
+    CONFIG_STM32_TIM1_FULL_REMAP
+    CONFIG_STM32_TIM1_PARTIAL_REMAP
+    CONFIG_STM32_TIM2_FULL_REMAP
+    CONFIG_STM32_TIM2_PARTIAL_REMAP_1
+    CONFIG_STM32_TIM2_PARTIAL_REMAP_2
+    CONFIG_STM32_TIM3_FULL_REMAP
+    CONFIG_STM32_TIM3_PARTIAL_REMAP
+    CONFIG_STM32_TIM4_REMAP
+    CONFIG_STM32_USART1_REMAP
+    CONFIG_STM32_USART2_REMAP
+    CONFIG_STM32_USART3_FULL_REMAP
+    CONFIG_STM32_USART3_PARTIAL_REMAP
+    CONFIG_STM32_SPI1_REMAP
+    CONFIG_STM32_SPI3_REMAP
+    CONFIG_STM32_I2C1_REMAP
+    CONFIG_STM32_CAN1_FULL_REMAP
+    CONFIG_STM32_CAN1_PARTIAL_REMAP
+    CONFIG_STM32_CAN2_REMAP
+
+  JTAG Enable settings (by default JTAG-DP and SW-DP are disabled):
+    CONFIG_STM32_JTAG_FULL_ENABLE - Enables full SWJ (JTAG-DP + SW-DP)
+    CONFIG_STM32_JTAG_NOJNTRST_ENABLE - Enables full SWJ (JTAG-DP + SW-DP)
+      but without JNTRST.
+    CONFIG_STM32_JTAG_SW_ENABLE - Set JTAG-DP disabled and SW-DP enabled
+
+  STM32F103Z specific device driver settings
+
+    CONFIG_U[S]ARTn_SERIAL_CONSOLE - selects the USARTn (n=1,2,3) or UART
+           m (m=4,5) for the console and ttys0 (default is the USART1).
+    CONFIG_U[S]ARTn_RXBUFSIZE - Characters are buffered as received.
+       This specific the size of the receive buffer
+    CONFIG_U[S]ARTn_TXBUFSIZE - Characters are buffered before
+       being sent.  This specific the size of the transmit buffer
+    CONFIG_U[S]ARTn_BAUD - The configure BAUD of the UART.  Must be
+    CONFIG_U[S]ARTn_BITS - The number of bits.  Must be either 7 or 8.
+    CONFIG_U[S]ARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
+    CONFIG_U[S]ARTn_2STOP - Two stop bits
+
+    CONFIG_STM32_SPI_INTERRUPTS - Select to enable interrupt driven SPI
+      support. Non-interrupt-driven, poll-waiting is recommended if the
+      interrupt rate would be to high in the interrupt driven case.
+    CONFIG_STM32_SPI_DMA - Use DMA to improve SPI transfer performance.
+      Cannot be used with CONFIG_STM32_SPI_INTERRUPT.
+
+    CONFIG_SDIO_DMA - Support DMA data transfers.  Requires CONFIG_STM32_SDIO
+      and CONFIG_STM32_DMA2.
+    CONFIG_SDIO_PRI - Select SDIO interrupt prority.  Default: 128
+    CONFIG_SDIO_DMAPRIO - Select SDIO DMA interrupt priority. 
+      Default:  Medium
+    CONFIG_SDIO_WIDTH_D1_ONLY - Select 1-bit transfer mode.  Default:
+      4-bit transfer mode.
+
+  STM3210E-EVAL CAN Configuration
+
+    CONFIG_CAN - Enables CAN support (one or both of CONFIG_STM32_CAN1 or
+      CONFIG_STM32_CAN2 must also be defined)
+    CONFIG_CAN_EXTID - Enables support for the 29-bit extended ID.  Default
+      Standard 11-bit IDs.
+    CONFIG_CAN_FIFOSIZE - The size of the circular buffer of CAN messages.
+      Default: 8
+    CONFIG_CAN_NPENDINGRTR - The size of the list of pending RTR requests.
+      Default: 4
+    CONFIG_CAN_LOOPBACK - A CAN driver may or may not support a loopback
+      mode for testing. The STM32 CAN driver does support loopback mode.
+    CONFIG_CAN1_BAUD - CAN1 BAUD rate.  Required if CONFIG_STM32_CAN1 is defined.
+    CONFIG_CAN2_BAUD - CAN1 BAUD rate.  Required if CONFIG_STM32_CAN2 is defined.
+    CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6
+    CONFIG_CAN_TSEG2 - the number of CAN time quanta in segment 2. Default: 7
+    CONFIG_CAN_REGDEBUG - If CONFIG_DEBUG is set, this will generate an
+      dump of all CAN registers.
+
+  STM3210E-EVAL LCD Hardware Configuration
+
+    CONFIG_LCD_LANDSCAPE - Define for 320x240 display "landscape"
+      support. Default is this 320x240 "landscape" orientation
+      (this setting is informative only... not used).
+    CONFIG_LCD_PORTRAIT - Define for 240x320 display "portrait"
+      orientation support.  In this orientation, the STM3210E-EVAL's
+      LCD ribbon cable is at the bottom of the display. Default is
+      320x240 "landscape" orientation.
+    CONFIG_LCD_RPORTRAIT - Define for 240x320 display "reverse
+      portrait" orientation support.  In this orientation, the
+      STM3210E-EVAL's LCD ribbon cable is at the top of the display.
+      Default is 320x240 "landscape" orientation.
+    CONFIG_LCD_BACKLIGHT - Define to support a backlight.
+    CONFIG_LCD_PWM - If CONFIG_STM32_TIM1 is also defined, then an
+      adjustable backlight will be provided using timer 1 to generate
+      various pulse widthes.  The granularity of the settings is
+      determined by CONFIG_LCD_MAXPOWER.  If CONFIG_LCD_PWM (or
+      CONFIG_STM32_TIM1) is not defined, then a simple on/off backlight
+      is provided.
+    CONFIG_LCD_RDSHIFT - When reading 16-bit gram data, there appears
+      to be a shift in the returned data.  This value fixes the offset.
+      Default 5.
+
+    The LCD driver dynamically selects the LCD based on the reported LCD
+    ID value.  However, code size can be reduced by suppressing support for
+    individual LCDs using:
+
+    CONFIG_STM32_AM240320_DISABLE
+    CONFIG_STM32_SPFD5408B_DISABLE
+    CONFIG_STM32_R61580_DISABLE
+
+Configurations
+==============
+
+Each STM3210E-EVAL configuration is maintained in a sudirectory and
+can be selected as follow:
+
+    cd tools
+    ./configure.sh stm3210e-eval/<subdir>
+    cd -
+    . ./setenv.sh
+
+Where <subdir> is one of the following:
+
+  buttons:
+  --------
+
+    Uses apps/examples/buttons to exercise STM3210E-EVAL buttons and
+    button interrupts.
+ 
+    CONFIG_STM32_CODESOURCERYW=y  : CodeSourcery under Windows
+
+  composite
+  ---------
+
+    This configuration exercises a composite USB interface consisting
+    of a CDC/ACM device and a USB mass storage device.  This configuration
+    uses apps/examples/composite.
+
+  nsh and nsh2:
+  ------------
+    Configure the NuttShell (nsh) located at examples/nsh.
+
+    Differences between the two NSH configurations:
+
+    =========== ======================= ================================
+                nsh                     nsh2
+    =========== ======================= ================================
+    Toolchain:  NuttX buildroot for     Codesourcery for Windows (1)
+                Linux or Cygwin (1,2)
+    ----------- ----------------------- --------------------------------
+    Loader:     DfuSe                   DfuSe
+    ----------- ----------------------- --------------------------------
+    Serial      Debug output: USART1    Debug output: USART1
+    Console:    NSH output:   USART1    NSH output:   USART1 (3)
+    ----------- ----------------------- --------------------------------
+    microSD     Yes                     Yes
+    Support
+    ----------- ----------------------- --------------------------------
+    FAT FS      CONFIG_FAT_LCNAME=y     CONFIG_FAT_LCNAME=y
+    Config      CONFIG_FAT_LFN=n        CONFIG_FAT_LFN=y (4)
+    ----------- ----------------------- --------------------------------
+    Support for No                      Yes
+    Built-in
+    Apps
+    ----------- ----------------------- --------------------------------
+    Built-in    None                    apps/examples/nx
+    Apps                                apps/examples/nxhello
+                                        apps/examples/usbstorage (5)
+    =========== ======================= ================================
+
+    (1) You will probably need to modify nsh/setenv.sh or nsh2/setenv.sh
+        to set up the correct PATH variable for whichever toolchain you
+        may use.
+    (2) Since DfuSe is assumed, this configuration may only work under
+        Cygwin without modification.
+    (3) When any other device other than /dev/console is used for a user
+        interface, (1) linefeeds (\n) will not be expanded to carriage return
+        / linefeeds \r\n). You will need to configure your terminal program
+        to account for this. And (2) input is not automatically echoed so
+        you will have to turn local echo on.
+    (4) Microsoft holds several patents related to the design of
+        long file names in the FAT file system.  Please refer to the
+        details in the top-level COPYING file.  Please do not use FAT
+        long file name unless you are familiar with these patent issues.
+    (5) When built as an NSH add-on command (CONFIG_EXAMPLES_USBMSC_BUILTIN=y),
+        Caution should be used to assure that the SD drive is not in use when
+        the USB storage device is configured.  Specifically, the SD driver
+        should be unmounted like:
+
+        nsh> mount -t vfat /dev/mmcsd0 /mnt/sdcard # Card is mounted in NSH
+        ...
+        nsh> umount /mnd/sdcard                    # Unmount before connecting USB!!!
+        nsh> msconn                                # Connect the USB storage device
+        ...
+        nsh> msdis                                 # Disconnect USB storate device
+        nsh> mount -t vfat /dev/mmcsd0 /mnt/sdcard # Restore the mount
+
+        Failure to do this could result in corruption of the SD card format.
+
+  nx:
+  ---
+    An example using the NuttX graphics system (NX).  This example
+    focuses on general window controls, movement, mouse and keyboard
+    input.
+
+    CONFIG_STM32_CODESOURCERYW=y  : CodeSourcery under Windows
+    CONFIG_LCD_RPORTRAIT=y        : 240x320 reverse portrait
+
+  nxlines:
+  ------
+    Another example using the NuttX graphics system (NX).   This
+    example focuses on placing lines on the background in various
+    orientations.
+
+    CONFIG_STM32_CODESOURCERYW=y  : CodeSourcery under Windows
+    CONFIG_LCD_RPORTRAIT=y        : 240x320 reverse portrait
+
+  nxtext:
+  ------
+    Another example using the NuttX graphics system (NX).   This
+    example focuses on placing text on the background while pop-up
+    windows occur.  Text should continue to update normally with
+    or without the popup windows present.
+
+    CONFIG_STM32_BUILDROOT=y      : NuttX buildroot under Linux or Cygwin
+    CONFIG_LCD_RPORTRAIT=y        : 240x320 reverse portrait
+
+    NOTE:  When I tried building this example with the CodeSourcery
+    tools, I got a hardfault inside of its libgcc.  I haven't
+    retested since then, but beware if you choose to change the
+    toolchain.
+
+  ostest:
+  ------
+    This configuration directory, performs a simple OS test using
+    examples/ostest.  By default, this project assumes that you are
+    using the DFU bootloader.
+
+    CONFIG_STM32_BUILDROOT=y      : NuttX buildroot under Linux or Cygwin
+
+  RIDE
+  ----
+    This configuration builds a trivial bring-up binary.  It is
+    useful only because it words with the RIDE7 IDE and R-Link debugger.
+
+    CONFIG_STM32_RAISONANCE=y     : Raisonance RIDE7 under Windows
+
+  usbserial:
+  ---------
+    This configuration directory exercises the USB serial class
+    driver at examples/usbserial.  See examples/README.txt for
+    more information.
+
+    CONFIG_STM32_BUILDROOT=y      : NuttX buildroot under Linux or Cygwin
+
+    USB debug output can be enabled as by changing the following
+    settings in the configuration file:
+
+    -CONFIG_DEBUG=n
+    -CONFIG_DEBUG_VERBOSE=n
+    -CONFIG_DEBUG_USB=n
+    +CONFIG_DEBUG=y
+    +CONFIG_DEBUG_VERBOSE=y
+    +CONFIG_DEBUG_USB=y
+
+    -CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
+    -CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
+    -CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
+    -CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
+    -CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
+    +CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=y
+    +CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=y
+    +CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=y
+    +CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=y
+    +CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=y
+
+    By default, the usbserial example uses the Prolific PL2303
+    serial/USB converter emulation.  The example can be modified
+    to use the CDC/ACM serial class by making the following changes
+    to the configuration file:
+
+    -CONFIG_PL2303=y
+    +CONFIG_PL2303=n
+
+    -CONFIG_CDCACM=n
+    +CONFIG_CDCACM=y
+
+    The example can also be converted to use the alternative
+    USB serial example at apps/examples/usbterm by changing the 
+    following:
+
+    -CONFIGURED_APPS += examples/usbserial
+    +CONFIGURED_APPS += examples/usbterm
+
+    In either the original appconfig file (before configuring)
+    or in the final apps/.config file (after configuring).
+
+  usbstorage:
+  ----------
+    This configuration directory exercises the USB mass storage
+    class driver at examples/usbstorage.  See examples/README.txt for
+    more information.
+
+    CONFIG_STM32_BUILDROOT=y      : NuttX buildroot under Linux or Cygwin
+
diff --git a/nuttx-configs/px4io-v2/common/Make.defs b/nuttx-configs/px4io-v2/common/Make.defs
new file mode 100644
index 000000000..7f782b5b2
--- /dev/null
+++ b/nuttx-configs/px4io-v2/common/Make.defs
@@ -0,0 +1,175 @@
+############################################################################
+# configs/px4fmu/common/Make.defs
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+#
+# Generic Make.defs for the PX4FMU
+# Do not specify/use this file directly - it is included by config-specific
+# Make.defs in the per-config directories.
+#
+
+include ${TOPDIR}/tools/Config.mk
+
+#
+# We only support building with the ARM bare-metal toolchain from
+# https://launchpad.net/gcc-arm-embedded on Windows, Linux or Mac OS.
+#
+CONFIG_ARMV7M_TOOLCHAIN	:= GNU_EABI
+
+include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
+
+CC			 = $(CROSSDEV)gcc
+CXX			 = $(CROSSDEV)g++
+CPP			 = $(CROSSDEV)gcc -E
+LD			 = $(CROSSDEV)ld
+AR			 = $(CROSSDEV)ar rcs
+NM			 = $(CROSSDEV)nm
+OBJCOPY			 = $(CROSSDEV)objcopy
+OBJDUMP			 = $(CROSSDEV)objdump
+
+MAXOPTIMIZATION		 = -O3
+ARCHCPUFLAGS		 = -mcpu=cortex-m3 \
+			   -mthumb \
+			   -march=armv7-m
+
+# enable precise stack overflow tracking
+#INSTRUMENTATIONDEFINES	 = -finstrument-functions \
+#			   -ffixed-r10
+
+# use our linker script
+LDSCRIPT		 = ld.script
+
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  DIRLINK		 = $(TOPDIR)/tools/copydir.sh
+  DIRUNLINK		 = $(TOPDIR)/tools/unlink.sh
+  MKDEP			 = $(TOPDIR)/tools/mknulldeps.sh
+  ARCHINCLUDES		 = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+  ARCHXXINCLUDES	 = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+  ARCHSCRIPT		 = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/common/$(LDSCRIPT)}"
+else
+  ifeq ($(PX4_WINTOOL),y)
+    # Windows-native toolchains (MSYS)
+    DIRLINK		 = $(TOPDIR)/tools/copydir.sh
+    DIRUNLINK		 = $(TOPDIR)/tools/unlink.sh
+    MKDEP		 = $(TOPDIR)/tools/mknulldeps.sh
+    ARCHINCLUDES	 = -I. -isystem $(TOPDIR)/include
+    ARCHXXINCLUDES	 = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+    ARCHSCRIPT		 = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/common/$(LDSCRIPT)
+  else
+    # Linux/Cygwin-native toolchain 
+    MKDEP		 = $(TOPDIR)/tools/mkdeps.sh
+    ARCHINCLUDES	 = -I. -isystem $(TOPDIR)/include
+    ARCHXXINCLUDES	 = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+    ARCHSCRIPT		 = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/common/$(LDSCRIPT)
+  endif
+endif
+
+# tool versions
+ARCHCCVERSION		 = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR		 = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+# optimisation flags
+ARCHOPTIMIZATION	 = $(MAXOPTIMIZATION) \
+			   -fno-strict-aliasing \
+			   -fno-strength-reduce \
+			   -fomit-frame-pointer \
+   			   -funsafe-math-optimizations \
+   			   -fno-builtin-printf \
+   			   -ffunction-sections \
+   			   -fdata-sections
+
+ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
+ARCHOPTIMIZATION	+= -g
+endif
+
+ARCHCFLAGS		 = -std=gnu99
+ARCHCXXFLAGS		 = -fno-exceptions -fno-rtti -std=gnu++0x
+ARCHWARNINGS		 = -Wall \
+			   -Wextra \
+			   -Wdouble-promotion \
+			   -Wshadow \
+			   -Wfloat-equal \
+			   -Wframe-larger-than=1024 \
+			   -Wpointer-arith \
+			   -Wlogical-op \
+			   -Wmissing-declarations \
+			   -Wpacked \
+			   -Wno-unused-parameter
+#   -Wcast-qual  - generates spurious noreturn attribute warnings, try again later
+#   -Wconversion - would be nice, but too many "risky-but-safe" conversions in the code
+#   -Wcast-align - would help catch bad casts in some cases, but generates too many false positives
+
+ARCHCWARNINGS		 = $(ARCHWARNINGS) \
+			   -Wbad-function-cast \
+			   -Wstrict-prototypes \
+			   -Wold-style-declaration \
+			   -Wmissing-parameter-type \
+			   -Wmissing-prototypes \
+			   -Wnested-externs \
+			   -Wunsuffixed-float-constants
+ARCHWARNINGSXX		 = $(ARCHWARNINGS)
+ARCHDEFINES		 = 
+ARCHPICFLAGS		 = -fpic -msingle-pic-base -mpic-register=r10
+
+# this seems to be the only way to add linker flags
+EXTRA_LIBS		+= --warn-common \
+			   --gc-sections
+
+CFLAGS			 = $(ARCHCFLAGS) $(ARCHCWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -fno-common
+CPICFLAGS		 = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS		 = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS		 = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS		 = $(ARCHINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS			 = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1		 = -r -d -warn-common
+NXFLATLDFLAGS2		 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
+LDNXFLATFLAGS		 = -e main -s 2048
+
+OBJEXT			 = .o
+LIBEXT			 = .a
+EXEEXT			 =
+
+# produce partially-linked $1 from files in $2
+define PRELINK
+	@echo "PRELINK: $1"
+	$(Q) $(LD) -Ur -o $1 $2 && $(OBJCOPY) --localize-hidden $1
+endef
+
+HOSTCC			 = gcc
+HOSTINCLUDES		 = -I.
+HOSTCFLAGS		 = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS		 =
+
diff --git a/nuttx-configs/px4io-v2/common/ld.script b/nuttx-configs/px4io-v2/common/ld.script
new file mode 100755
index 000000000..69c2f9cb2
--- /dev/null
+++ b/nuttx-configs/px4io-v2/common/ld.script
@@ -0,0 +1,129 @@
+/****************************************************************************
+ * configs/stm3210e-eval/nsh/ld.script
+ *
+ *   Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The STM32F100C8 has 64Kb of FLASH beginning at address 0x0800:0000 and
+ * 8Kb of SRAM beginning at address 0x2000:0000.  When booting from FLASH,
+ * FLASH memory is aliased to address 0x0000:0000 where the code expects to
+ * begin execution by jumping to the entry point in the 0x0800:0000 address
+ * range.
+ */
+
+MEMORY
+{
+    flash (rx) : ORIGIN = 0x08001000, LENGTH = 60K
+    sram (rwx) : ORIGIN = 0x20000000, LENGTH = 8K
+}
+
+OUTPUT_ARCH(arm)
+ENTRY(__start)		/* treat __start as the anchor for dead code stripping */
+EXTERN(_vectors)	/* force the vectors to be included in the output */
+
+/* 
+ * Ensure that abort() is present in the final object.  The exception handling
+ * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
+ */
+EXTERN(abort)
+
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		*(.text .text.*)        
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)        
+		*(.gnu.linkonce.t.*)
+		*(.glue_7)
+		*(.glue_7t)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+	} > flash
+
+	/*
+	 * Init functions (static constructors and the like)
+	 */
+        .init_section : {
+                _sinit = ABSOLUTE(.);
+                KEEP(*(.init_array .init_array.*))
+                _einit = ABSOLUTE(.);
+        } > flash
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > flash
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > flash
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	/* The STM32F100CB has 8Kb of SRAM beginning at the following address */
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/nuttx-configs/px4io-v2/common/setenv.sh b/nuttx-configs/px4io-v2/common/setenv.sh
new file mode 100755
index 000000000..ff9a4bf8a
--- /dev/null
+++ b/nuttx-configs/px4io-v2/common/setenv.sh
@@ -0,0 +1,47 @@
+#!/bin/bash
+# configs/stm3210e-eval/dfu/setenv.sh
+#
+#   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$(basename $0)" = "setenv.sh" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
+
+WD=`pwd`
+export RIDE_BIN="/cygdrive/c/Program Files/Raisonance/Ride/arm-gcc/bin"
+export BUILDROOT_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+export PATH="${BUILDROOT_BIN}:${RIDE_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"
diff --git a/nuttx-configs/px4io-v2/include/README.txt b/nuttx-configs/px4io-v2/include/README.txt
new file mode 100755
index 000000000..2264a80aa
--- /dev/null
+++ b/nuttx-configs/px4io-v2/include/README.txt
@@ -0,0 +1 @@
+This directory contains header files unique to the PX4IO board.
diff --git a/nuttx-configs/px4io-v2/include/board.h b/nuttx-configs/px4io-v2/include/board.h
new file mode 100755
index 000000000..b93ad4220
--- /dev/null
+++ b/nuttx-configs/px4io-v2/include/board.h
@@ -0,0 +1,177 @@
+/************************************************************************************
+ * configs/px4io/include/board.h
+ * include/arch/board/board.h
+ *
+ *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __ARCH_BOARD_BOARD_H
+#define __ARCH_BOARD_BOARD_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+#ifndef __ASSEMBLY__
+# include <stdint.h>
+#endif
+#include <stm32.h>
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* Clocking *************************************************************************/
+
+/* On-board crystal frequency is 24MHz (HSE) */
+
+#define STM32_BOARD_XTAL        24000000ul
+
+/* Use the HSE output as the system clock */
+
+#define STM32_SYSCLK_SW         RCC_CFGR_SW_HSE
+#define STM32_SYSCLK_SWS        RCC_CFGR_SWS_HSE
+#define STM32_SYSCLK_FREQUENCY  STM32_BOARD_XTAL
+
+/* AHB clock (HCLK) is SYSCLK (24MHz) */
+
+#define STM32_RCC_CFGR_HPRE     RCC_CFGR_HPRE_SYSCLK
+#define STM32_HCLK_FREQUENCY    STM32_SYSCLK_FREQUENCY
+#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY    /* same as above, to satisfy compiler */
+
+/* APB2 clock (PCLK2) is HCLK (24MHz) */
+
+#define STM32_RCC_CFGR_PPRE2    RCC_CFGR_PPRE2_HCLK
+#define STM32_PCLK2_FREQUENCY   STM32_HCLK_FREQUENCY
+#define STM32_APB2_CLKIN        (STM32_PCLK2_FREQUENCY)   /* Timers 2-4 */
+
+/* APB2 timer 1 will receive PCLK2. */
+
+#define STM32_APB2_TIM1_CLKIN   (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM8_CLKIN   (STM32_PCLK2_FREQUENCY)
+
+/* APB1 clock (PCLK1) is HCLK (24MHz) */
+
+#define STM32_RCC_CFGR_PPRE1    RCC_CFGR_PPRE1_HCLK
+#define STM32_PCLK1_FREQUENCY   (STM32_HCLK_FREQUENCY)
+
+/* All timers run off PCLK */
+
+#define STM32_APB1_TIM1_CLKIN   (STM32_PCLK2_FREQUENCY)
+#define STM32_APB1_TIM2_CLKIN   (STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM3_CLKIN   (STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM4_CLKIN   (STM32_PCLK1_FREQUENCY)
+
+/*
+ * Some of the USART pins are not available; override the GPIO
+ * definitions with an invalid pin configuration.
+ */
+#undef GPIO_USART2_CTS
+#define GPIO_USART2_CTS	0xffffffff
+#undef GPIO_USART2_RTS
+#define GPIO_USART2_RTS	0xffffffff
+#undef GPIO_USART2_CK
+#define GPIO_USART2_CK 	0xffffffff
+#undef GPIO_USART3_TX
+#define GPIO_USART3_TX 	0xffffffff
+#undef GPIO_USART3_CK
+#define GPIO_USART3_CK 	0xffffffff
+#undef GPIO_USART3_CTS
+#define GPIO_USART3_CTS	0xffffffff
+#undef GPIO_USART3_RTS
+#define GPIO_USART3_RTS	0xffffffff
+
+/* 
+ * High-resolution timer
+ */
+#define HRT_TIMER		1	/* use timer1 for the HRT */
+#define HRT_TIMER_CHANNEL	2	/* use capture/compare channel 2 */
+
+/*
+ * PPM
+ *
+ * PPM input is handled by the HRT timer.
+ *
+ * Pin is PA8, timer 1, channel 1
+ */
+#define HRT_PPM_CHANNEL		1	/* use capture/compare channel 1 */
+#define GPIO_PPM_IN		GPIO_TIM1_CH1IN
+
+/* LED definitions ******************************************************************/
+/* PX4 has two LEDs that we will encode as: */
+
+#define LED_STARTED       0  /* LED? */
+#define LED_HEAPALLOCATE  1  /* LED? */
+#define LED_IRQSENABLED   2  /* LED? + LED? */
+#define LED_STACKCREATED  3  /* LED? */
+#define LED_INIRQ         4  /* LED? + LED? */
+#define LED_SIGNAL        5  /* LED? + LED? */
+#define LED_ASSERTION     6  /* LED? + LED? + LED? */
+#define LED_PANIC         7  /* N/C  + N/C  + N/C + LED? */
+
+/************************************************************************************
+ * Public Data
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+#undef EXTERN
+#if defined(__cplusplus)
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+/************************************************************************************
+ * Public Function Prototypes
+ ************************************************************************************/
+/************************************************************************************
+ * Name: stm32_boardinitialize
+ *
+ * Description:
+ *   All STM32 architectures must provide the following entry point.  This entry point
+ *   is called early in the intitialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+EXTERN void stm32_boardinitialize(void);
+    
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif  /* __ARCH_BOARD_BOARD_H */
diff --git a/nuttx-configs/px4io-v2/nsh/Make.defs b/nuttx-configs/px4io-v2/nsh/Make.defs
new file mode 100644
index 000000000..bdfc4e3e2
--- /dev/null
+++ b/nuttx-configs/px4io-v2/nsh/Make.defs
@@ -0,0 +1,3 @@
+include ${TOPDIR}/.config
+
+include $(TOPDIR)/configs/px4io-v2/common/Make.defs
diff --git a/nuttx-configs/px4io-v2/nsh/appconfig b/nuttx-configs/px4io-v2/nsh/appconfig
new file mode 100644
index 000000000..48a41bcdb
--- /dev/null
+++ b/nuttx-configs/px4io-v2/nsh/appconfig
@@ -0,0 +1,32 @@
+############################################################################
+#
+#   Copyright (C) 2012 PX4 Development Team. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name PX4 nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
diff --git a/nuttx-configs/px4io-v2/nsh/defconfig b/nuttx-configs/px4io-v2/nsh/defconfig
new file mode 100755
index 000000000..846ea8fb9
--- /dev/null
+++ b/nuttx-configs/px4io-v2/nsh/defconfig
@@ -0,0 +1,526 @@
+############################################################################
+# configs/px4io/nsh/defconfig
+#
+#   Copyright (C) 2012 PX4 Development Team. All rights reserved.
+#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+#
+# architecture selection
+#
+# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
+#   processor architecture.
+# CONFIG_ARCH_family - for use in C code.  This identifies the
+#   particular chip family that the architecture is implemented
+#   in.
+# CONFIG_ARCH_architecture - for use in C code.  This identifies the
+#   specific architecture within the chip family.
+# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
+# CONFIG_ARCH_CHIP_name - For use in C code
+# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
+#   the board that supports the particular chip or SoC.
+# CONFIG_ARCH_BOARD_name - for use in C code
+# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
+# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
+# CONFIG_DRAM_SIZE - Describes the installed DRAM.
+# CONFIG_DRAM_START - The start address of DRAM (physical)
+# CONFIG_ARCH_IRQPRIO - The ST32F100CB supports interrupt prioritization
+# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
+#   stack. If defined, this symbol is the size of the interrupt
+#   stack in bytes.  If not defined, the user task stacks will be
+#   used during interrupt handling.
+# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
+# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader.
+# CONFIG_ARCH_LEDS -  Use LEDs to show state. Unique to board architecture.
+# CONFIG_ARCH_BUTTONS -  Enable support for buttons. Unique to board architecture.
+# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
+#   cause a 100 second delay during boot-up.  This 100 second delay
+#   serves no purpose other than it allows you to calibrate
+#   CONFIG_BOARD_LOOPSPERMSEC.  You simply use a stop watch to measure
+#   the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
+#   the delay actually is 100 seconds.
+# CONFIG_ARCH_DMA - Support DMA initialization
+#
+CONFIG_ARCH="arm"
+CONFIG_ARCH_ARM=y
+CONFIG_ARCH_CORTEXM3=y
+CONFIG_ARCH_CHIP="stm32"
+CONFIG_ARCH_CHIP_STM32F100C8=y
+CONFIG_ARCH_BOARD="px4io-v2"
+CONFIG_ARCH_BOARD_PX4IO_V2=y
+CONFIG_BOARD_LOOPSPERMSEC=2000
+CONFIG_DRAM_SIZE=0x00002000
+CONFIG_DRAM_START=0x20000000
+CONFIG_ARCH_IRQPRIO=y
+CONFIG_ARCH_INTERRUPTSTACK=n
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARCH_BOOTLOADER=n
+CONFIG_ARCH_LEDS=n
+CONFIG_ARCH_BUTTONS=n
+CONFIG_ARCH_CALIBRATION=n
+CONFIG_ARCH_DMA=y
+CONFIG_ARCH_MATH_H=y
+
+CONFIG_ARMV7M_CMNVECTOR=y
+
+#
+# JTAG Enable settings (by default JTAG-DP and SW-DP are disabled):
+#
+#   CONFIG_STM32_DFU - Use the DFU bootloader, not JTAG
+#
+# JTAG Enable options:
+#
+#   CONFIG_STM32_JTAG_FULL_ENABLE - Enables full SWJ (JTAG-DP + SW-DP)
+#   CONFIG_STM32_JTAG_NOJNTRST_ENABLE - Enables full SWJ (JTAG-DP + SW-DP)
+#     but without JNTRST.
+#   CONFIG_STM32_JTAG_SW_ENABLE - Set JTAG-DP disabled and SW-DP enabled
+#
+CONFIG_STM32_DFU=n
+CONFIG_STM32_JTAG_FULL_ENABLE=y
+CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n
+CONFIG_STM32_JTAG_SW_ENABLE=n
+
+#
+# Individual subsystems can be enabled:
+#
+# AHB: 
+CONFIG_STM32_DMA1=y
+CONFIG_STM32_DMA2=n
+CONFIG_STM32_CRC=n
+# APB1:
+# Timers 2,3 and 4 are owned by the PWM driver
+CONFIG_STM32_TIM2=n
+CONFIG_STM32_TIM3=n
+CONFIG_STM32_TIM4=n
+CONFIG_STM32_TIM5=n
+CONFIG_STM32_TIM6=n
+CONFIG_STM32_TIM7=n
+CONFIG_STM32_WWDG=n
+CONFIG_STM32_SPI2=n
+CONFIG_STM32_USART2=y
+CONFIG_STM32_USART3=y
+CONFIG_STM32_I2C1=n
+CONFIG_STM32_I2C2=n
+CONFIG_STM32_BKP=n
+CONFIG_STM32_PWR=n
+CONFIG_STM32_DAC=n
+# APB2:
+# We use our own ADC driver, but leave this on for clocking purposes.
+CONFIG_STM32_ADC1=y
+CONFIG_STM32_ADC2=n
+# TIM1 is owned by the HRT
+CONFIG_STM32_TIM1=n
+CONFIG_STM32_SPI1=n
+CONFIG_STM32_TIM8=n
+CONFIG_STM32_USART1=y
+CONFIG_STM32_ADC3=n
+
+
+#
+# STM32F100 specific serial device driver settings
+#
+# CONFIG_USARTn_SERIAL_CONSOLE - selects the USARTn for the
+#   console and ttys0 (default is the USART1).
+# CONFIG_USARTn_RXBUFSIZE - Characters are buffered as received.
+#   This specific the size of the receive buffer
+# CONFIG_USARTn_TXBUFSIZE - Characters are buffered before
+#   being sent.  This specific the size of the transmit buffer
+# CONFIG_USARTn_BAUD - The configure BAUD of the UART.  Must be
+# CONFIG_USARTn_BITS - The number of bits.  Must be either 7 or 8.
+# CONFIG_USARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
+# CONFIG_USARTn_2STOP - Two stop bits
+#
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_STANDARD_SERIAL=y
+
+CONFIG_USART1_SERIAL_CONSOLE=y
+CONFIG_USART2_SERIAL_CONSOLE=n
+CONFIG_USART3_SERIAL_CONSOLE=n
+
+CONFIG_USART1_TXBUFSIZE=64
+CONFIG_USART2_TXBUFSIZE=64
+CONFIG_USART3_TXBUFSIZE=64
+
+CONFIG_USART1_RXBUFSIZE=64
+CONFIG_USART2_RXBUFSIZE=64
+CONFIG_USART3_RXBUFSIZE=64
+
+CONFIG_USART1_BAUD=115200
+CONFIG_USART2_BAUD=115200
+CONFIG_USART3_BAUD=115200
+
+CONFIG_USART1_BITS=8
+CONFIG_USART2_BITS=8
+CONFIG_USART3_BITS=8
+
+CONFIG_USART1_PARITY=0
+CONFIG_USART2_PARITY=0
+CONFIG_USART3_PARITY=0
+
+CONFIG_USART1_2STOP=0
+CONFIG_USART2_2STOP=0
+CONFIG_USART3_2STOP=0
+
+CONFIG_USART1_RXDMA=y
+SERIAL_HAVE_CONSOLE_DMA=y
+# Conflicts with I2C1 DMA
+CONFIG_USART2_RXDMA=n
+CONFIG_USART3_RXDMA=y
+
+#
+# General build options
+#
+# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
+#   BSPs from www.ridgerun.com using the tools/mkimage.sh script
+# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
+#   used with many different loaders using the GNU objcopy program
+#   Should not be selected if you are not using the GNU toolchain.
+# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format
+#   used with many different loaders using the GNU objcopy program
+#   Should not be selected if you are not using the GNU toolchain.
+# CONFIG_RAW_BINARY - make a raw binary format file used with many
+#   different loaders using the GNU objcopy program.  This option
+#   should not be selected if you are not using the GNU toolchain.
+# CONFIG_HAVE_LIBM - toolchain supports libm.a
+#
+CONFIG_RRLOAD_BINARY=n
+CONFIG_INTELHEX_BINARY=n
+CONFIG_MOTOROLA_SREC=n
+CONFIG_RAW_BINARY=y
+CONFIG_HAVE_LIBM=n
+
+#
+# General OS setup
+#
+# CONFIG_APPS_DIR - Identifies the relative path to the directory
+#   that builds the application to link with NuttX.  Default: ../apps
+# CONFIG_DEBUG - enables built-in debug options
+# CONFIG_DEBUG_VERBOSE - enables verbose debug output
+# CONFIG_DEBUG_SYMBOLS - build without optimization and with
+#   debug symbols (needed for use with a debugger).
+# CONFIG_HAVE_CXX - Enable support for C++
+# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
+#   for initialization of static C++ instances for this architecture
+#   and for the selected toolchain (via up_cxxinitialize()).
+# CONFIG_MM_REGIONS - If the architecture includes multiple
+#   regions of memory to allocate from, this specifies the
+#   number of memory regions that the memory manager must
+#   handle and enables the API mm_addregion(start, end);
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
+#   time console output
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
+#   inform NuttX that the processor hardware is providing
+#   system timer interrupts at some interrupt interval other
+#   than 10 msec.
+# CONFIG_RR_INTERVAL - The round robin timeslice will be set
+#   this number of milliseconds;  Round robin scheduling can
+#   be disabled by setting this value to zero.
+# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in 
+#   scheduler to monitor system performance
+# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
+#   task name to save in the TCB.  Useful if scheduler
+#   instrumentation is selected.  Set to zero to disable.
+# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
+#   Used to initialize the internal time logic.
+# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions.
+#   You would only need this if you are concerned about accurate
+#   time conversions in the past or in the distant future.
+# CONFIG_JULIAN_TIME - Enables Julian time conversions. You
+#   would only need this if you are concerned about accurate
+#   time conversion in the distand past.  You must also define
+#   CONFIG_GREGORIAN_TIME in order to use Julian time.
+# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
+#   provides /dev/console.  Enables stdout, stderr, stdin.
+# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
+#   driver (minimul support)
+# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
+#   errorcheck mutexes. Enables pthread_mutexattr_settype().
+# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
+#   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
+# CONFIG_SCHED_WORKQUEUE.  Create a dedicated "worker" thread to
+#  handle delayed processing from interrupt handlers.  This feature
+#  is required for some drivers but, if there are not complaints,
+#  can be safely disabled.  The worker thread also performs
+#  garbage collection -- completing any delayed memory deallocations
+#  from interrupt handlers.  If the worker thread is disabled,
+#  then that clean will be performed by the IDLE thread instead
+#  (which runs at the lowest of priority and may not be appropriate
+#  if memory reclamation is of high priority).  If CONFIG_SCHED_WORKQUEUE
+#  is enabled, then the following options can also be used:
+# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker
+#  thread.  Default: 50
+# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for
+#  work in units of microseconds.  Default: 50*1000 (50 MS).
+# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker
+#  thread.  Default: CONFIG_IDLETHREAD_STACKSIZE.
+# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up
+#  the worker thread.  Default: 4
+# CONFIG_SCHED_WAITPID - Enable the waitpid() API
+# CONFIG_SCHED_ATEXIT - Enabled the atexit() API
+#
+CONFIG_USER_ENTRYPOINT="user_start"
+#CONFIG_APPS_DIR=
+CONFIG_DEBUG=n
+CONFIG_DEBUG_VERBOSE=n
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEBUG_FS=n
+CONFIG_DEBUG_GRAPHICS=n
+CONFIG_DEBUG_LCD=n
+CONFIG_DEBUG_USB=n
+CONFIG_DEBUG_NET=n
+CONFIG_DEBUG_RTC=n
+CONFIG_DEBUG_ANALOG=n
+CONFIG_DEBUG_PWM=n
+CONFIG_DEBUG_CAN=n
+CONFIG_DEBUG_I2C=n
+CONFIG_DEBUG_INPUT=n
+
+CONFIG_MSEC_PER_TICK=1
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_MM_REGIONS=1
+CONFIG_MM_SMALL=y
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_RR_INTERVAL=0
+CONFIG_SCHED_INSTRUMENTATION=n
+CONFIG_TASK_NAME_SIZE=8
+CONFIG_START_YEAR=1970
+CONFIG_START_MONTH=1
+CONFIG_START_DAY=1
+CONFIG_GREGORIAN_TIME=n
+CONFIG_JULIAN_TIME=n
+# this eats ~1KiB of RAM ... work out why
+CONFIG_DEV_CONSOLE=y
+CONFIG_DEV_LOWCONSOLE=n
+CONFIG_MUTEX_TYPES=n
+CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SCHED_WORKQUEUE=n
+CONFIG_SCHED_WORKPRIORITY=50
+CONFIG_SCHED_WORKPERIOD=50000
+CONFIG_SCHED_WORKSTACKSIZE=1024
+CONFIG_SIG_SIGWORK=4
+CONFIG_SCHED_WAITPID=n
+CONFIG_SCHED_ATEXIT=n
+
+#
+# The following can be used to disable categories of
+# APIs supported by the OS.  If the compiler supports
+# weak functions, then it should not be necessary to
+# disable functions unless you want to restrict usage
+# of those APIs.
+#
+# There are certain dependency relationships in these
+# features.
+#
+# o mq_notify logic depends on signals to awaken tasks
+#   waiting for queues to become full or empty.
+# o pthread_condtimedwait() depends on signals to wake
+#   up waiting tasks.
+#
+CONFIG_DISABLE_CLOCK=n
+CONFIG_DISABLE_POSIX_TIMERS=y
+CONFIG_DISABLE_PTHREAD=y
+CONFIG_DISABLE_SIGNALS=y
+CONFIG_DISABLE_MQUEUE=y
+CONFIG_DISABLE_MOUNTPOINT=y
+CONFIG_DISABLE_ENVIRON=y
+CONFIG_DISABLE_POLL=y
+
+#
+# Misc libc settings
+#
+# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
+#   little smaller if we do not support fieldwidthes
+#
+CONFIG_NOPRINTF_FIELDWIDTH=n
+
+#
+# Allow for architecture optimized implementations
+#
+# The architecture can provide optimized versions of the
+# following to improve system performance
+#
+CONFIG_ARCH_MEMCPY=n
+CONFIG_ARCH_MEMCMP=n
+CONFIG_ARCH_MEMMOVE=n
+CONFIG_ARCH_MEMSET=n
+CONFIG_ARCH_STRCMP=n
+CONFIG_ARCH_STRCPY=n
+CONFIG_ARCH_STRNCPY=n
+CONFIG_ARCH_STRLEN=n
+CONFIG_ARCH_STRNLEN=n
+CONFIG_ARCH_BZERO=n
+
+#
+# Sizes of configurable things (0 disables)
+#
+# CONFIG_MAX_TASKS - The maximum number of simultaneously
+#   active tasks.  This value must be a power of two.
+# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
+#   of parameters that a task may receive (i.e., maxmum value
+#   of 'argc')
+# CONFIG_NPTHREAD_KEYS - The number of items of thread-
+#   specific data that can be retained
+# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
+#   descriptors (one for each open)
+# CONFIG_NFILE_STREAMS - The maximum number of streams that
+#   can be fopen'ed
+# CONFIG_NAME_MAX - The maximum size of a file name.
+# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
+#   on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_STDIO_LINEBUFFER - If standard C buffered I/O is enabled
+#   (CONFIG_STDIO_BUFFER_SIZE > 0), then this option may be added
+#   to force automatic, line-oriented flushing the output buffer
+#   for putc(), fputc(), putchar(), puts(), fputs(), printf(),
+#   fprintf(), and vfprintf().  When a newline is encountered in
+#   the output string, the output buffer will be flushed.  This
+#   (slightly) increases the NuttX footprint but supports the kind
+#   of behavior that people expect for printf().
+# CONFIG_NUNGET_CHARS - Number of characters that can be
+#   buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
+#   structures.  The system manages a pool of preallocated
+#   message structures to minimize dynamic allocations
+# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
+#   a fixed payload size given by this settin (does not include
+#   other message structure overhead.
+# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
+#   can be passed to a watchdog handler
+# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
+#   structures.  The system manages a pool of preallocated
+#   watchdog structures to minimize dynamic allocations
+# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
+#   timer structures.  The system manages a pool of preallocated
+#   timer structures to minimize dynamic allocations.  Set to
+#   zero for all dynamic allocations.
+#
+CONFIG_MAX_TASKS=4
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=2
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=0
+CONFIG_NAME_MAX=12
+CONFIG_STDIO_BUFFER_SIZE=32
+CONFIG_STDIO_LINEBUFFER=n
+CONFIG_NUNGET_CHARS=2
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=4
+CONFIG_PREALLOC_TIMERS=0
+
+
+#
+# Settings for apps/nshlib
+#
+# CONFIG_NSH_BUILTIN_APPS - Support external registered,
+#   "named" applications that can be executed from the NSH
+#   command line (see apps/README.txt for more information).
+# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer
+# CONFIG_NSH_STRERROR - Use strerror(errno)
+# CONFIG_NSH_LINELEN - Maximum length of one command line
+# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
+# CONFIG_NSH_DISABLESCRIPT - Disable scripting support
+# CONFIG_NSH_DISABLEBG - Disable background commands
+# CONFIG_NSH_ROMFSETC - Use startup script in /etc
+# CONFIG_NSH_CONSOLE - Use serial console front end
+# CONFIG_NSH_TELNET - Use telnetd console front end
+# CONFIG_NSH_ARCHINIT - Platform provides architecture
+#   specific initialization (nsh_archinitialize()).
+#
+
+# Disable NSH completely
+CONFIG_NSH_CONSOLE=n
+
+#
+# Stack and heap information
+#
+# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP
+#   operation from FLASH but must copy initialized .data sections to RAM.
+#   (should also be =n for the STM3210E-EVAL which always runs from flash)
+# CONFIG_BOOT_COPYTORAM -  Some configurations boot in FLASH
+#   but copy themselves entirely into RAM for better performance.
+# CONFIG_CUSTOM_STACK - The up_ implementation will handle
+#   all stack operations outside of the nuttx model.
+# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
+# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
+#  This is the thread that (1) performs the inital boot of the system up
+#  to the point where user_start() is spawned, and (2) there after is the
+#  IDLE thread that executes only when there is no other thread ready to
+#  run.
+# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
+#  for the main user thread that begins at the user_start() entry point.
+# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
+# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
+# CONFIG_HEAP_BASE - The beginning of the heap
+# CONFIG_HEAP_SIZE - The size of the heap
+#
+CONFIG_BOOT_RUNFROMFLASH=n
+CONFIG_BOOT_COPYTORAM=n
+CONFIG_CUSTOM_STACK=n
+CONFIG_STACK_POINTER=
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=1200
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_PTHREAD_STACK_DEFAULT=1024
+CONFIG_HEAP_BASE=
+CONFIG_HEAP_SIZE=
diff --git a/nuttx-configs/px4io-v2/nsh/setenv.sh b/nuttx-configs/px4io-v2/nsh/setenv.sh
new file mode 100755
index 000000000..ff9a4bf8a
--- /dev/null
+++ b/nuttx-configs/px4io-v2/nsh/setenv.sh
@@ -0,0 +1,47 @@
+#!/bin/bash
+# configs/stm3210e-eval/dfu/setenv.sh
+#
+#   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$(basename $0)" = "setenv.sh" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
+
+WD=`pwd`
+export RIDE_BIN="/cygdrive/c/Program Files/Raisonance/Ride/arm-gcc/bin"
+export BUILDROOT_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+export PATH="${BUILDROOT_BIN}:${RIDE_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"
diff --git a/nuttx-configs/px4io-v2/src/Makefile b/nuttx-configs/px4io-v2/src/Makefile
new file mode 100644
index 000000000..bb9539d16
--- /dev/null
+++ b/nuttx-configs/px4io-v2/src/Makefile
@@ -0,0 +1,84 @@
+############################################################################
+# configs/stm3210e-eval/src/Makefile
+#
+#   Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+-include $(TOPDIR)/Make.defs
+
+CFLAGS		+= -I$(TOPDIR)/sched
+
+ASRCS		= 
+AOBJS		= $(ASRCS:.S=$(OBJEXT))
+
+CSRCS		= empty.c
+
+COBJS		= $(CSRCS:.c=$(OBJEXT))
+
+SRCS		= $(ASRCS) $(CSRCS)
+OBJS		= $(AOBJS) $(COBJS)
+
+ARCH_SRCDIR	= $(TOPDIR)/arch/$(CONFIG_ARCH)/src
+ifeq ($(WINTOOL),y)
+  CFLAGS	+= -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
+  		   -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
+  		   -I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}"
+else
+  CFLAGS	+= -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m
+endif
+
+all: libboard$(LIBEXT)
+
+$(AOBJS): %$(OBJEXT): %.S
+	$(call ASSEMBLE, $<, $@)
+
+$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
+	$(call COMPILE, $<, $@)
+
+libboard$(LIBEXT): $(OBJS)
+	$(call ARCHIVE, $@, $(OBJS))
+
+.depend: Makefile $(SRCS)
+	@$(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
+	@touch $@
+
+depend: .depend
+
+clean:
+	$(call DELFILE, libboard$(LIBEXT))
+	$(call CLEAN)
+
+distclean: clean
+	$(call DELFILE, Make.dep)
+	$(call DELFILE, .depend)
+
+-include Make.dep
diff --git a/nuttx-configs/px4io-v2/src/README.txt b/nuttx-configs/px4io-v2/src/README.txt
new file mode 100644
index 000000000..d4eda82fd
--- /dev/null
+++ b/nuttx-configs/px4io-v2/src/README.txt
@@ -0,0 +1 @@
+This directory contains drivers unique to the STMicro STM3210E-EVAL development board.
diff --git a/nuttx-configs/px4io-v2/src/empty.c b/nuttx-configs/px4io-v2/src/empty.c
new file mode 100644
index 000000000..ace900866
--- /dev/null
+++ b/nuttx-configs/px4io-v2/src/empty.c
@@ -0,0 +1,4 @@
+/*
+ * There are no source files here, but libboard.a can't be empty, so 
+ * we have this empty source file to keep it company.
+ */
diff --git a/nuttx-configs/px4io-v2/test/Make.defs b/nuttx-configs/px4io-v2/test/Make.defs
new file mode 100644
index 000000000..87508e22e
--- /dev/null
+++ b/nuttx-configs/px4io-v2/test/Make.defs
@@ -0,0 +1,3 @@
+include ${TOPDIR}/.config
+
+include $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/common/Make.defs
diff --git a/nuttx-configs/px4io-v2/test/appconfig b/nuttx-configs/px4io-v2/test/appconfig
new file mode 100644
index 000000000..3cfc41b43
--- /dev/null
+++ b/nuttx-configs/px4io-v2/test/appconfig
@@ -0,0 +1,44 @@
+############################################################################
+# configs/stm3210e-eval/nsh/appconfig
+#
+#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+# Path to example in apps/examples containing the user_start entry point
+
+CONFIGURED_APPS += examples/nsh
+
+CONFIGURED_APPS += system/readline
+CONFIGURED_APPS += nshlib
+CONFIGURED_APPS += reboot
+
+CONFIGURED_APPS += drivers/boards/px4iov2
diff --git a/nuttx-configs/px4io-v2/test/defconfig b/nuttx-configs/px4io-v2/test/defconfig
new file mode 100755
index 000000000..19dfefdf8
--- /dev/null
+++ b/nuttx-configs/px4io-v2/test/defconfig
@@ -0,0 +1,544 @@
+############################################################################
+# configs/px4io/nsh/defconfig
+#
+#   Copyright (C) 2009-2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+#
+# architecture selection
+#
+# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
+#   processor architecture.
+# CONFIG_ARCH_family - for use in C code.  This identifies the
+#   particular chip family that the architecture is implemented
+#   in.
+# CONFIG_ARCH_architecture - for use in C code.  This identifies the
+#   specific architecture within the chip familyl.
+# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
+# CONFIG_ARCH_CHIP_name - For use in C code
+# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
+#   the board that supports the particular chip or SoC.
+# CONFIG_ARCH_BOARD_name - for use in C code
+# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
+# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
+# CONFIG_DRAM_SIZE - Describes the installed DRAM.
+# CONFIG_DRAM_START - The start address of DRAM (physical)
+# CONFIG_DRAM_END - Last address+1 of installed RAM
+# CONFIG_ARCH_IRQPRIO - The ST32F100CB supports interrupt prioritization
+# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
+#   stack. If defined, this symbol is the size of the interrupt
+#   stack in bytes.  If not defined, the user task stacks will be
+#   used during interrupt handling.
+# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
+# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader.
+# CONFIG_ARCH_LEDS -  Use LEDs to show state. Unique to board architecture.
+# CONFIG_ARCH_BUTTONS -  Enable support for buttons. Unique to board architecture.
+# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
+#   cause a 100 second delay during boot-up.  This 100 second delay
+#   serves no purpose other than it allows you to calibrate
+#   CONFIG_BOARD_LOOPSPERMSEC.  You simply use a stop watch to measure
+#   the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
+#   the delay actually is 100 seconds.
+# CONFIG_ARCH_DMA - Support DMA initialization
+#
+CONFIG_ARCH=arm
+CONFIG_ARCH_ARM=y
+CONFIG_ARCH_CORTEXM3=y
+CONFIG_ARCH_CHIP=stm32
+CONFIG_ARCH_CHIP_STM32F100C8=y
+CONFIG_ARCH_BOARD=px4iov2
+CONFIG_ARCH_BOARD_PX4IO_V2=y
+CONFIG_BOARD_LOOPSPERMSEC=24000
+CONFIG_DRAM_SIZE=0x00002000
+CONFIG_DRAM_START=0x20000000
+CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
+CONFIG_ARCH_IRQPRIO=y
+CONFIG_ARCH_INTERRUPTSTACK=n
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARCH_BOOTLOADER=n
+CONFIG_ARCH_LEDS=n
+CONFIG_ARCH_BUTTONS=y
+CONFIG_ARCH_CALIBRATION=n
+CONFIG_ARCH_DMA=n
+CONFIG_ARMV7M_CMNVECTOR=y
+
+#
+# JTAG Enable settings (by default JTAG-DP and SW-DP are disabled):
+#
+#   CONFIG_STM32_DFU - Use the DFU bootloader, not JTAG
+#
+# JTAG Enable options:
+#
+#   CONFIG_STM32_JTAG_FULL_ENABLE - Enables full SWJ (JTAG-DP + SW-DP)
+#   CONFIG_STM32_JTAG_NOJNTRST_ENABLE - Enables full SWJ (JTAG-DP + SW-DP)
+#     but without JNTRST.
+#   CONFIG_STM32_JTAG_SW_ENABLE - Set JTAG-DP disabled and SW-DP enabled
+#
+CONFIG_STM32_DFU=n
+CONFIG_STM32_JTAG_FULL_ENABLE=y
+CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n
+CONFIG_STM32_JTAG_SW_ENABLE=n
+
+#
+# Individual subsystems can be enabled:
+# AHB: 
+CONFIG_STM32_DMA1=n
+CONFIG_STM32_DMA2=n
+CONFIG_STM32_CRC=n
+# APB1:
+# Timers 2,3 and 4 are owned by the PWM driver
+CONFIG_STM32_TIM2=n
+CONFIG_STM32_TIM3=n
+CONFIG_STM32_TIM4=n
+CONFIG_STM32_TIM5=n
+CONFIG_STM32_TIM6=n
+CONFIG_STM32_TIM7=n
+CONFIG_STM32_WWDG=n
+CONFIG_STM32_SPI2=n
+CONFIG_STM32_USART2=y
+CONFIG_STM32_USART3=y
+CONFIG_STM32_I2C1=y
+CONFIG_STM32_I2C2=n
+CONFIG_STM32_BKP=n
+CONFIG_STM32_PWR=n
+CONFIG_STM32_DAC=n
+# APB2:
+CONFIG_STM32_ADC1=y
+CONFIG_STM32_ADC2=n
+# TIM1 is owned by the HRT
+CONFIG_STM32_TIM1=n
+CONFIG_STM32_SPI1=n
+CONFIG_STM32_TIM8=n
+CONFIG_STM32_USART1=y
+CONFIG_STM32_ADC3=n
+
+#
+# Timer and I2C devices may need to the following to force power to be applied:
+#
+#CONFIG_STM32_FORCEPOWER=y
+
+#
+# STM32F100 specific serial device driver settings
+#
+# CONFIG_USARTn_SERIAL_CONSOLE - selects the USARTn for the
+#   console and ttys0 (default is the USART1).
+# CONFIG_USARTn_RXBUFSIZE - Characters are buffered as received.
+#   This specific the size of the receive buffer
+# CONFIG_USARTn_TXBUFSIZE - Characters are buffered before
+#   being sent.  This specific the size of the transmit buffer
+# CONFIG_USARTn_BAUD - The configure BAUD of the UART.  Must be
+# CONFIG_USARTn_BITS - The number of bits.  Must be either 7 or 8.
+# CONFIG_USARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
+# CONFIG_USARTn_2STOP - Two stop bits
+#
+CONFIG_USART1_SERIAL_CONSOLE=y
+CONFIG_USART2_SERIAL_CONSOLE=n
+CONFIG_USART3_SERIAL_CONSOLE=n
+
+CONFIG_USART1_TXBUFSIZE=64
+CONFIG_USART2_TXBUFSIZE=64
+CONFIG_USART3_TXBUFSIZE=64
+
+CONFIG_USART1_RXBUFSIZE=64
+CONFIG_USART2_RXBUFSIZE=64
+CONFIG_USART3_RXBUFSIZE=64
+
+CONFIG_USART1_BAUD=57600
+CONFIG_USART2_BAUD=115200
+CONFIG_USART3_BAUD=115200
+
+CONFIG_USART1_BITS=8
+CONFIG_USART2_BITS=8
+CONFIG_USART3_BITS=8
+
+CONFIG_USART1_PARITY=0
+CONFIG_USART2_PARITY=0
+CONFIG_USART3_PARITY=0
+
+CONFIG_USART1_2STOP=0
+CONFIG_USART2_2STOP=0
+CONFIG_USART3_2STOP=0
+
+#
+# General build options
+#
+# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
+#   BSPs from www.ridgerun.com using the tools/mkimage.sh script
+# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
+#   used with many different loaders using the GNU objcopy program
+#   Should not be selected if you are not using the GNU toolchain.
+# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format
+#   used with many different loaders using the GNU objcopy program
+#   Should not be selected if you are not using the GNU toolchain.
+# CONFIG_RAW_BINARY - make a raw binary format file used with many
+#   different loaders using the GNU objcopy program.  This option
+#   should not be selected if you are not using the GNU toolchain.
+# CONFIG_HAVE_LIBM - toolchain supports libm.a
+#
+CONFIG_RRLOAD_BINARY=n
+CONFIG_INTELHEX_BINARY=n
+CONFIG_MOTOROLA_SREC=n
+CONFIG_RAW_BINARY=y
+CONFIG_HAVE_LIBM=n
+
+#
+# General OS setup
+#
+# CONFIG_APPS_DIR - Identifies the relative path to the directory
+#   that builds the application to link with NuttX.  Default: ../apps
+# CONFIG_DEBUG - enables built-in debug options
+# CONFIG_DEBUG_VERBOSE - enables verbose debug output
+# CONFIG_DEBUG_SYMBOLS - build without optimization and with
+#   debug symbols (needed for use with a debugger).
+# CONFIG_HAVE_CXX - Enable support for C++
+# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
+#   for initialization of static C++ instances for this architecture
+#   and for the selected toolchain (via up_cxxinitialize()).
+# CONFIG_MM_REGIONS - If the architecture includes multiple
+#   regions of memory to allocate from, this specifies the
+#   number of memory regions that the memory manager must
+#   handle and enables the API mm_addregion(start, end);
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
+#   time console output
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
+#   inform NuttX that the processor hardware is providing
+#   system timer interrupts at some interrupt interval other
+#   than 10 msec.
+# CONFIG_RR_INTERVAL - The round robin timeslice will be set
+#   this number of milliseconds;  Round robin scheduling can
+#   be disabled by setting this value to zero.
+# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in 
+#   scheduler to monitor system performance
+# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
+#   task name to save in the TCB.  Useful if scheduler
+#   instrumentation is selected.  Set to zero to disable.
+# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
+#   Used to initialize the internal time logic.
+# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions.
+#   You would only need this if you are concerned about accurate
+#   time conversions in the past or in the distant future.
+# CONFIG_JULIAN_TIME - Enables Julian time conversions. You
+#   would only need this if you are concerned about accurate
+#   time conversion in the distand past.  You must also define
+#   CONFIG_GREGORIAN_TIME in order to use Julian time.
+# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
+#   provides /dev/console.  Enables stdout, stderr, stdin.
+# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
+#   driver (minimul support)
+# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
+#   errorcheck mutexes. Enables pthread_mutexattr_settype().
+# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
+#   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
+# CONFIG_NXFLAT. Enable support for the NXFLAT binary format.
+#  This format will support execution of NuttX binaries located
+#  in a ROMFS filesystem (see examples/nxflat).
+# CONFIG_SCHED_WORKQUEUE.  Create a dedicated "worker" thread to
+#  handle delayed processing from interrupt handlers.  This feature
+#  is required for some drivers but, if there are not complaints,
+#  can be safely disabled.  The worker thread also performs
+#  garbage collection -- completing any delayed memory deallocations
+#  from interrupt handlers.  If the worker thread is disabled,
+#  then that clean will be performed by the IDLE thread instead
+#  (which runs at the lowest of priority and may not be appropriate
+#  if memory reclamation is of high priority).  If CONFIG_SCHED_WORKQUEUE
+#  is enabled, then the following options can also be used:
+# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker
+#  thread.  Default: 50
+# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for
+#  work in units of microseconds.  Default: 50*1000 (50 MS).
+# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker
+#  thread.  Default: CONFIG_IDLETHREAD_STACKSIZE.
+# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up
+#  the worker thread.  Default: 4
+#
+#CONFIG_APPS_DIR=
+CONFIG_DEBUG=n
+CONFIG_DEBUG_VERBOSE=n
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=n
+CONFIG_MM_REGIONS=1
+CONFIG_MM_SMALL=y
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_RR_INTERVAL=200
+CONFIG_SCHED_INSTRUMENTATION=n
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_START_YEAR=2009
+CONFIG_START_MONTH=9
+CONFIG_START_DAY=21
+CONFIG_GREGORIAN_TIME=n
+CONFIG_JULIAN_TIME=n
+CONFIG_DEV_CONSOLE=y
+CONFIG_DEV_LOWCONSOLE=n
+CONFIG_MUTEX_TYPES=n
+CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=y
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_NXFLAT=n
+CONFIG_SCHED_WORKQUEUE=n
+CONFIG_SCHED_WORKPRIORITY=50
+CONFIG_SCHED_WORKPERIOD=(50*1000)
+CONFIG_SCHED_WORKSTACKSIZE=512
+CONFIG_SIG_SIGWORK=4
+
+CONFIG_USER_ENTRYPOINT="nsh_main"
+#
+# The following can be used to disable categories of
+# APIs supported by the OS.  If the compiler supports
+# weak functions, then it should not be necessary to
+# disable functions unless you want to restrict usage
+# of those APIs.
+#
+# There are certain dependency relationships in these
+# features.
+#
+# o mq_notify logic depends on signals to awaken tasks
+#   waiting for queues to become full or empty.
+# o pthread_condtimedwait() depends on signals to wake
+#   up waiting tasks.
+#
+CONFIG_DISABLE_CLOCK=n
+CONFIG_DISABLE_POSIX_TIMERS=y
+CONFIG_DISABLE_PTHREAD=n
+CONFIG_DISABLE_SIGNALS=n
+CONFIG_DISABLE_MQUEUE=y
+CONFIG_DISABLE_MOUNTPOINT=y
+CONFIG_DISABLE_ENVIRON=y
+CONFIG_DISABLE_POLL=y
+
+#
+# Misc libc settings
+#
+# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
+#   little smaller if we do not support fieldwidthes
+#
+CONFIG_NOPRINTF_FIELDWIDTH=n
+
+#
+# Allow for architecture optimized implementations
+#
+# The architecture can provide optimized versions of the
+# following to improve system performance
+#
+CONFIG_ARCH_MEMCPY=n
+CONFIG_ARCH_MEMCMP=n
+CONFIG_ARCH_MEMMOVE=n
+CONFIG_ARCH_MEMSET=n
+CONFIG_ARCH_STRCMP=n
+CONFIG_ARCH_STRCPY=n
+CONFIG_ARCH_STRNCPY=n
+CONFIG_ARCH_STRLEN=n
+CONFIG_ARCH_STRNLEN=n
+CONFIG_ARCH_BZERO=n
+
+#
+# Sizes of configurable things (0 disables)
+#
+# CONFIG_MAX_TASKS - The maximum number of simultaneously
+#   active tasks.  This value must be a power of two.
+# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
+#   of parameters that a task may receive (i.e., maxmum value
+#   of 'argc')
+# CONFIG_NPTHREAD_KEYS - The number of items of thread-
+#   specific data that can be retained
+# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
+#   descriptors (one for each open)
+# CONFIG_NFILE_STREAMS - The maximum number of streams that
+#   can be fopen'ed
+# CONFIG_NAME_MAX - The maximum size of a file name.
+# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
+#   on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_NUNGET_CHARS - Number of characters that can be
+#   buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
+#   structures.  The system manages a pool of preallocated
+#   message structures to minimize dynamic allocations
+# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
+#   a fixed payload size given by this settin (does not include
+#   other message structure overhead.
+# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
+#   can be passed to a watchdog handler
+# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
+#   structures.  The system manages a pool of preallocated
+#   watchdog structures to minimize dynamic allocations
+# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
+#   timer structures.  The system manages a pool of preallocated
+#   timer structures to minimize dynamic allocations.  Set to
+#   zero for all dynamic allocations.
+#
+CONFIG_MAX_TASKS=4
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=2
+CONFIG_NFILE_DESCRIPTORS=6
+CONFIG_NFILE_STREAMS=4
+CONFIG_NAME_MAX=32
+CONFIG_STDIO_BUFFER_SIZE=64
+CONFIG_NUNGET_CHARS=2
+CONFIG_PREALLOC_MQ_MSGS=1
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=3
+CONFIG_PREALLOC_TIMERS=1
+
+
+#
+# Settings for apps/nshlib
+#
+# CONFIG_NSH_BUILTIN_APPS - Support external registered,
+#   "named" applications that can be executed from the NSH
+#   command line (see apps/README.txt for more information).
+# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer
+# CONFIG_NSH_STRERROR - Use strerror(errno)
+# CONFIG_NSH_LINELEN - Maximum length of one command line
+# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
+# CONFIG_NSH_DISABLESCRIPT - Disable scripting support
+# CONFIG_NSH_DISABLEBG - Disable background commands
+# CONFIG_NSH_ROMFSETC - Use startup script in /etc
+# CONFIG_NSH_CONSOLE - Use serial console front end
+# CONFIG_NSH_TELNET - Use telnetd console front end
+# CONFIG_NSH_ARCHINIT - Platform provides architecture
+#   specific initialization (nsh_archinitialize()).
+#
+# If CONFIG_NSH_TELNET is selected:
+# CONFIG_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size
+# CONFIG_NSH_DHCPC - Obtain address using DHCP
+# CONFIG_NSH_IPADDR - Provides static IP address
+# CONFIG_NSH_DRIPADDR - Provides static router IP address
+# CONFIG_NSH_NETMASK - Provides static network mask
+# CONFIG_NSH_NOMAC - Use a bogus MAC address
+#
+# If CONFIG_NSH_ROMFSETC is selected:
+# CONFIG_NSH_ROMFSMOUNTPT - ROMFS mountpoint
+# CONFIG_NSH_INITSCRIPT - Relative path to init script
+# CONFIG_NSH_ROMFSDEVNO - ROMFS RAM device minor
+# CONFIG_NSH_ROMFSSECTSIZE - ROMF sector size
+# CONFIG_NSH_FATDEVNO - FAT FS RAM device minor
+# CONFIG_NSH_FATSECTSIZE - FAT FS sector size
+# CONFIG_NSH_FATNSECTORS - FAT FS number of sectors
+# CONFIG_NSH_FATMOUNTPT - FAT FS mountpoint
+#
+CONFIG_BUILTIN=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_FILEIOSIZE=64
+CONFIG_NSH_STRERROR=n
+CONFIG_NSH_LINELEN=64
+CONFIG_NSH_NESTDEPTH=1
+CONFIG_NSH_DISABLESCRIPT=y
+CONFIG_NSH_DISABLEBG=n
+CONFIG_NSH_ROMFSETC=n
+CONFIG_NSH_CONSOLE=y
+CONFIG_NSH_TELNET=n
+CONFIG_NSH_ARCHINIT=n
+CONFIG_NSH_IOBUFFER_SIZE=256
+CONFIG_NSH_STACKSIZE=1024
+CONFIG_NSH_DHCPC=n
+CONFIG_NSH_NOMAC=n
+CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_NSH_ROMFSMOUNTPT="/etc"
+CONFIG_NSH_INITSCRIPT="init.d/rcS"
+CONFIG_NSH_ROMFSDEVNO=0
+CONFIG_NSH_ROMFSSECTSIZE=64
+CONFIG_NSH_FATDEVNO=1
+CONFIG_NSH_FATSECTSIZE=512
+CONFIG_NSH_FATNSECTORS=1024
+CONFIG_NSH_FATMOUNTPT=/tmp
+
+#
+# Architecture-specific NSH options
+#
+CONFIG_NSH_MMCSDSPIPORTNO=0
+CONFIG_NSH_MMCSDSLOTNO=0
+CONFIG_NSH_MMCSDMINOR=0
+
+#
+# Stack and heap information
+#
+# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP
+#   operation from FLASH but must copy initialized .data sections to RAM.
+#   (should also be =n for the STM3210E-EVAL which always runs from flash)
+# CONFIG_BOOT_COPYTORAM -  Some configurations boot in FLASH
+#   but copy themselves entirely into RAM for better performance.
+# CONFIG_CUSTOM_STACK - The up_ implementation will handle
+#   all stack operations outside of the nuttx model.
+# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
+# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
+#  This is the thread that (1) performs the inital boot of the system up
+#  to the point where user_start() is spawned, and (2) there after is the
+#  IDLE thread that executes only when there is no other thread ready to
+#  run.
+# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
+#  for the main user thread that begins at the user_start() entry point.
+# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
+# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
+# CONFIG_HEAP_BASE - The beginning of the heap
+# CONFIG_HEAP_SIZE - The size of the heap
+#
+CONFIG_BOOT_RUNFROMFLASH=n
+CONFIG_BOOT_COPYTORAM=n
+CONFIG_CUSTOM_STACK=n
+CONFIG_STACK_POINTER=
+CONFIG_IDLETHREAD_STACKSIZE=800
+CONFIG_USERMAIN_STACKSIZE=1024
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=512
+CONFIG_HEAP_BASE=
+CONFIG_HEAP_SIZE=
diff --git a/nuttx-configs/px4io-v2/test/setenv.sh b/nuttx-configs/px4io-v2/test/setenv.sh
new file mode 100755
index 000000000..d83685192
--- /dev/null
+++ b/nuttx-configs/px4io-v2/test/setenv.sh
@@ -0,0 +1,47 @@
+#!/bin/bash
+# configs/stm3210e-eval/dfu/setenv.sh
+#
+#   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$(basename $0)" = "setenv.sh" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
+
+WD=`pwd`
+export RIDE_BIN="/cygdrive/c/Program Files/Raisonance/Ride/arm-gcc/bin"
+export BUILDROOT_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
+export PATH="${BUILDROOT_BIN}:${RIDE_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"