Merge commit 'de749a3602423f5ee6ca56f3cf2dfff04e31ec6d' (kconfig-cleanup) into fmuv2_bringup

2 files changed, 23 insertions, 40 deletions

diff --git a/nuttx-configs/px4fmu-v1/nsh/defconfig b/nuttx-configs/px4fmu-v1/nsh/defconfig
index 6a4795c46..a7a6725c6 100644
--- a/nuttx-configs/px4fmu-v1/nsh/defconfig
+++ b/nuttx-configs/px4fmu-v1/nsh/defconfig
@@ -73,17 +73,16 @@ CONFIG_ARCH="arm"
 # CONFIG_ARCH_CHIP_LPC31XX is not set
 # CONFIG_ARCH_CHIP_LPC43XX is not set
 # CONFIG_ARCH_CHIP_NUC1XX is not set
-# CONFIG_ARCH_CHIP_SAM3U is not set
+# CONFIG_ARCH_CHIP_SAM34 is not set
 CONFIG_ARCH_CHIP_STM32=y
 # CONFIG_ARCH_CHIP_STR71X is not set
 CONFIG_ARCH_CORTEXM4=y
-CONFIG_ARCH_HAVE_FPU=y
 CONFIG_ARCH_FAMILY="armv7-m"
 CONFIG_ARCH_CHIP="stm32"
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_ARCH_HAVE_CMNVECTOR=y
 CONFIG_ARMV7M_CMNVECTOR=y
-CONFIG_ARMV7M_STACKCHECK=y
+CONFIG_ARCH_HAVE_FPU=y
 CONFIG_ARCH_FPU=y
 CONFIG_ARCH_HAVE_MPU=y
 # CONFIG_ARMV7M_MPU is not set
@@ -93,10 +92,8 @@ CONFIG_ARCH_HAVE_MPU=y
 #
 # CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
 CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y
+CONFIG_ARMV7M_STACKCHECK=y
 CONFIG_SERIAL_TERMIOS=y
-CONFIG_SERIAL_DISABLE_REORDERING=y
-CONFIG_SERIAL_IFLOWCONTROL=y
-CONFIG_SERIAL_OFLOWCONTROL=y
 
 #
 # STM32 Configuration Options
@@ -248,6 +245,7 @@ CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
 # CONFIG_STM32_FORCEPOWER is not set
 # CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
 # CONFIG_STM32_CCMEXCLUDE is not set
+CONFIG_STM32_DMACAPABLE=y
 # CONFIG_STM32_TIM4_PWM is not set
 # CONFIG_STM32_TIM5_PWM is not set
 # CONFIG_STM32_TIM9_PWM is not set
@@ -275,6 +273,7 @@ CONFIG_UART5_RXDMA=y
 CONFIG_USART6_RXDMA=y
 # CONFIG_USART7_RXDMA is not set
 # CONFIG_USART8_RXDMA is not set
+CONFIG_SERIAL_DISABLE_REORDERING=y
 CONFIG_STM32_USART_SINGLEWIRE=y
 
 #
@@ -342,15 +341,12 @@ CONFIG_BOOT_RUNFROMFLASH=y
 #
 # Board Selection
 #
-CONFIG_ARCH_BOARD_PX4FMU_V1=y
-# CONFIG_ARCH_BOARD_CUSTOM is not set
-CONFIG_ARCH_BOARD="px4fmu-v1"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD=""
 
 #
 # Common Board Options
 #
-CONFIG_ARCH_HAVE_LEDS=y
-# CONFIG_ARCH_LEDS is not set
 CONFIG_NSH_MMCSDMINOR=0
 CONFIG_NSH_MMCSDSLOTNO=0
 CONFIG_NSH_MMCSDSPIPORTNO=3
@@ -358,8 +354,6 @@ CONFIG_NSH_MMCSDSPIPORTNO=3
 #
 # Board-Specific Options
 #
-CONFIG_HRT_TIMER=y
-CONFIG_HRT_PPM=y
 
 #
 # RTOS Features
@@ -497,6 +491,8 @@ CONFIG_USART1_BAUD=57600
 CONFIG_USART1_BITS=8
 CONFIG_USART1_PARITY=0
 CONFIG_USART1_2STOP=0
+# CONFIG_USART1_IFLOWCONTROL is not set
+# CONFIG_USART1_OFLOWCONTROL is not set
 
 #
 # USART2 Configuration
@@ -507,6 +503,8 @@ CONFIG_USART2_BAUD=57600
 CONFIG_USART2_BITS=8
 CONFIG_USART2_PARITY=0
 CONFIG_USART2_2STOP=0
+CONFIG_USART2_IFLOWCONTROL=y
+CONFIG_USART2_OFLOWCONTROL=y
 
 #
 # UART5 Configuration
@@ -517,6 +515,8 @@ CONFIG_UART5_BAUD=57600
 CONFIG_UART5_BITS=8
 CONFIG_UART5_PARITY=0
 CONFIG_UART5_2STOP=0
+# CONFIG_UART5_IFLOWCONTROL is not set
+# CONFIG_UART5_OFLOWCONTROL is not set
 
 #
 # USART6 Configuration
@@ -527,6 +527,10 @@ CONFIG_USART6_BAUD=57600
 CONFIG_USART6_BITS=8
 CONFIG_USART6_PARITY=0
 CONFIG_USART6_2STOP=0
+# CONFIG_USART6_IFLOWCONTROL is not set
+# CONFIG_USART6_OFLOWCONTROL is not set
+CONFIG_SERIAL_IFLOWCONTROL=y
+CONFIG_SERIAL_OFLOWCONTROL=y
 CONFIG_USBDEV=y
 
 #
@@ -534,10 +538,9 @@ CONFIG_USBDEV=y
 #
 # CONFIG_USBDEV_ISOCHRONOUS is not set
 # CONFIG_USBDEV_DUALSPEED is not set
-# CONFIG_USBDEV_SELFPOWERED is not set
-CONFIG_USBDEV_BUSPOWERED=y
+CONFIG_USBDEV_SELFPOWERED=y
+# CONFIG_USBDEV_BUSPOWERED is not set
 CONFIG_USBDEV_MAXPOWER=500
-# CONFIG_USBDEV_REMOTEWAKEUP is not set
 # CONFIG_USBDEV_DMA is not set
 # CONFIG_USBDEV_TRACE is not set
 
@@ -560,8 +563,9 @@ CONFIG_CDCACM_EPBULKIN_FSSIZE=64
 CONFIG_CDCACM_EPBULKIN_HSSIZE=512
 CONFIG_CDCACM_NWRREQS=4
 CONFIG_CDCACM_NRDREQS=4
-CONFIG_CDCACM_RXBUFSIZE=512
-CONFIG_CDCACM_TXBUFSIZE=512
+CONFIG_CDCACM_BULKIN_REQLEN=96
+CONFIG_CDCACM_RXBUFSIZE=256
+CONFIG_CDCACM_TXBUFSIZE=256
 CONFIG_CDCACM_VENDORID=0x26ac
 CONFIG_CDCACM_PRODUCTID=0x0010
 CONFIG_CDCACM_VENDORSTR="3D Robotics"
@@ -748,6 +752,7 @@ CONFIG_EXAMPLES_CDCACM=y
 # CONFIG_EXAMPLES_MM is not set
 # CONFIG_EXAMPLES_MODBUS is not set
 CONFIG_EXAMPLES_MOUNT=y
+# CONFIG_EXAMPLES_NRF24L01TERM is not set
 CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_NULL is not set
 # CONFIG_EXAMPLES_NX is not set
diff --git a/nuttx-configs/px4io-v1/nsh/defconfig b/nuttx-configs/px4io-v1/nsh/defconfig
index 525672233..3785e0367 100755
--- a/nuttx-configs/px4io-v1/nsh/defconfig
+++ b/nuttx-configs/px4io-v1/nsh/defconfig
@@ -201,28 +201,6 @@ CONFIG_USART2_RXDMA=n
 CONFIG_USART3_RXDMA=y
 
 #
-# PX4IO specific driver settings
-#
-# CONFIG_HRT_TIMER
-#   Enables the high-resolution timer.  The board definition must
-#   set HRT_TIMER and HRT_TIMER_CHANNEL to the timer and capture/
-#   compare channels to be used.
-# CONFIG_HRT_PPM
-#   Enables R/C PPM input using the HRT.  The board definition must
-#   set HRT_PPM_CHANNEL to the timer capture/compare channel to be
-#   used, and define GPIO_PPM_IN to configure the appropriate timer
-#   GPIO.
-# CONFIG_PWM_SERVO
-#   Enables the PWM servo driver.  The driver configuration must be
-#   supplied by the board support at initialisation time.
-#   Note that USART2 must be disabled on the PX4 board for this to
-#   be available.
-#
-#
-CONFIG_HRT_TIMER=y
-CONFIG_HRT_PPM=y
-
-#
 # General build options
 #
 # CONFIG_RRLOAD_BINARY - make the rrload binary format used with