diff options
author | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2012-09-29 19:10:52 +0000 |
---|---|---|
committer | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2012-09-29 19:10:52 +0000 |
commit | 253d3ab52353d640f11a95a148105d04d96a1d29 (patch) | |
tree | ef836780563818769a3ca6aeaef66bacd44c19e6 /nuttx/ChangeLog | |
parent | de53b28fd3ae24a81513278390ba02a5417cf8ac (diff) | |
download | px4-firmware-253d3ab52353d640f11a95a148105d04d96a1d29.tar.gz px4-firmware-253d3ab52353d640f11a95a148105d04d96a1d29.tar.bz2 px4-firmware-253d3ab52353d640f11a95a148105d04d96a1d29.zip |
Prep for 6.22 Release
git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5206 42af7a65-404d-4744-a932-0658087f49c3
Diffstat (limited to 'nuttx/ChangeLog')
-rw-r--r-- | nuttx/ChangeLog | 26 |
1 files changed, 13 insertions, 13 deletions
diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog index 438d89a91..ef9e77132 100644 --- a/nuttx/ChangeLog +++ b/nuttx/ChangeLog @@ -3193,7 +3193,7 @@ speed/duplex. This does not work for certain PHYs. Still some unresolved issues (also from Kate). * tools/Config.mk, Makefile, configs/*/Make.defs: Add a new Makefile - fragement to de-quoate certain strings from the Kconfig logic that + fragment to de-quote certain strings from the Kconfig logic that need to be used at path segments (Richard Cochran). * arch/arm/src/stm32/stm32_usbotghost.c: The STM32 USB host driver only works with debug turned on. The problem appears to be that with debug @@ -3201,7 +3201,7 @@ reveals a variety of errors. This check in improves NAK robustness for control transfers but does not resolve all of the issues. * configs/stm3220g-eval/*/defconfig: Calibrated delay loop. It had - never been calibrated was was way off. + never been calibrated was way off. * sched/sem_holder.c: Add logic to handler some priority inheritance cases when sem_post() is called from an interrupt handler. The logic is clearly wrong, but it is not known if this is the @@ -3212,13 +3212,13 @@ CONFIG_LIBC_STRERROR_SHORT that can be used to output shortened strings by strerror(). * arch/arm/src/stm32/stm32_usbotghost.c: Finally... the USB OTG FS - appears to handle NAKing correctly is complete. + appears to handle NAKing correctly. * configs/stm32f4discovery/*: Added and verifed support for USB OTG FS host on the STM32F4Discovery board. * configs/*/defconfig: Remove configuration documentation from config files. It is redundant, error-prone, and difficult to maintain. Configuration documentation is available in configs/README.txt for - common configurations and in configs/*/README.txt for board and MCU_ + common configurations and in configs/*/README.txt for board and MCU- specific configurations. * configs/stm3240g-eval: Add USB host support. * sched/os_bring.c, configs/*/defconfig, tools/mkconfig.c, and others: Added @@ -3226,7 +3226,7 @@ the default entry from user_start to some other symbol. Contributed by Kate. NOTE: This change does introduce a minor backward incompatibility. For example, if your application uses NSH as its start-up program, then your - code will not fail because it will be unable to find "user_start". The fix + build will now fail because it will be unable to find "user_start". The fix for this link failure is to add the following to your configuration file: CONFIG_USER_ENTRYPOINT="nsh_main". * libs/stdio/lib_libfread.c and lib_*flush*.c: Correct a couple of @@ -3269,7 +3269,7 @@ CONFIG_HEAP2_SIZE (decimal) instead of CONFIG_HEAP2_END (hex). * tools/configure.sh: Don't append the apps directory path setting if the correct setting is already in defined in the defconfig file. - * fs/fat/fs_utils.c: Improper constructed bool expression. This + * fs/fat/fs_utils.c: Improperly constructed bool expression. This would cause many unnecessary writes to FLASH (Thanks Ronen Vainish). * Kconfig: Verify configuration settings for the LPC43xx. This includes some corrections to configuration variable names and defconfig settings. @@ -3319,13 +3319,13 @@ in all places. * drivers/enc28j60.c, include/nuttx/net/enc28j60.h, and olimex-strp711/src/up_enc28j60.c: No longer passes IRQ number - as a parameters. Instead now passes a call table to manage + as a parameter. Instead now passes a call table to manage ENC28J60 GPIO interrupts. That is because GPIO interrupts are handled in different ways by different MCUs and some do not support IRQ numbers for GPIO interrupts. * mm/mm_gran* and include/nuttx/gran.h: Add a simple granule- based allocator. The intent of this allocator is to support - simple allocation of DMA I/O buffers. The initiali check-in + simple allocation of DMA I/O buffers. The initial check-in is code complete but untested (not event built into the mm/Makefile yet. * confgs/fire-stm32v2: The board port is basically functional. @@ -3352,7 +3352,7 @@ * arch/arm/include/armv7-m/irq.h: Fix a critical bug in irqsave(). It looks like sometimes the compile will re-order some instructions inapproapriately. This end result is that interrupts will get - stuff off. + stuck off. * drivers/mtd/w25.c: Beginning of a driver for the Windbond SPI FLASH family (W25x16, W25x32, and W25x64). The initial check-in is basically just the SST25 driver with some name changes. @@ -3372,7 +3372,7 @@ I2C reset logic to recover from locked devices on the bus. * configs/*/*/Make.defs, tools/Config.mk, Makefile: Refactor all common make definitions from the various Make.defs files into - the common tools/Make.mk. Add support for a verbosity options: + the common tools/Config.mk. Add support for a verbosity options: Specify V=1 on the make command line in order to see the exact commands used in the build (Contributed by Richard Cochran). * drivers/net/enc28j60.c: The ENC28J60 Ethernet driver is @@ -3400,17 +3400,17 @@ * configs/shenzhou/src/up_lcd.c: Oops. Shenzhou LCD does not have an SSD1289 controller. Its an ILI93xx. Ported the STM3240G-EVAL ILI93xx driver to work on the Shenzhou board. - * configs/shenzhou/nxwm: Added an NxWM configuratino for the + * configs/shenzhou/nxwm: Added an NxWM configuration for the Shenzhou board. This is untested on initial check-in. It will be used to verify the Shenzhou LCD driver (and eventually the touchscreen driver). * configs/shenzhou/src/up_touchscreen.c: Add ADS7843E touchscreen support for the Shenzhou board. The initial check-in is untested - and basically a clone of the the touchscreen support fro the SAM-3U. + and basically a clone of the the touchscreen support for the SAM-3U. * tools/cfgparser.c: There are some NxWidget configuration settings that must be de-quoted. * arch/arm/src/stm32/Kconfig: There is no SPI4. Some platforms - SPI3 and some do not (still not clear). + support SPI3 and some do not (still not clear). * nuttx/configs/shenzhou: Various fixes to build new NxWM configuration. * configs/shenzhou: Oops. The Shenzhou LCD is and SSD1289, |