Resync new repository with old repo r5166

git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5153 42af7a65-404d-4744-a932-0658087f49c3

1 files changed, 478 insertions, 0 deletions

diff --git a/nuttx/configs/olimex-lpc1766stk/nettest/defconfig b/nuttx/configs/olimex-lpc1766stk/nettest/defconfig
new file mode 100755
index 000000000..6ac19b8e7
--- /dev/null
+++ b/nuttx/configs/olimex-lpc1766stk/nettest/defconfig
@@ -0,0 +1,478 @@
+############################################################################
+# configs/olimex-lpc1766stk/nettest/defconfig
+#
+#   Copyright (C) 2010-2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+#
+# Architecture Selection
+#
+CONFIG_ARCH="arm"
+CONFIG_ARCH_ARM=y
+CONFIG_ARCH_CORTEXM3=y
+CONFIG_ARCH_CHIP="lpc17xx"
+CONFIG_ARCH_CHIP_LPC17XX=y
+CONFIG_ARCH_CHIP_LPC1766=y
+CONFIG_ARCH_BOARD="olimex-lpc1766stk"
+CONFIG_ARCH_BOARD_LPC1766STK=y
+CONFIG_BOARD_LOOPSPERMSEC=8111
+CONFIG_DRAM_SIZE=32768
+CONFIG_DRAM_START=0x10000000
+CONFIG_ARCH_IRQPRIO=y
+CONFIG_ARCH_INTERRUPTSTACK=n
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARCH_BOOTLOADER=n
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_BUTTONS=n
+CONFIG_ARCH_CALIBRATION=n
+CONFIG_ARCH_DMA=n
+
+#
+# Identify toolchain and linker options
+#
+CONFIG_LPC17_CODESOURCERYW=n
+CONFIG_LPC17_CODESOURCERYL=n
+CONFIG_LPC17_DEVKITARM=n
+CONFIG_LPC17_BUILDROOT=y
+
+#
+# Individual subsystems can be enabled:
+#
+CONFIG_LPC17_ETHERNET=y
+CONFIG_LPC17_USBHOST=n
+CONFIG_LPC17_USBOTG=n
+CONFIG_LPC17_USBDEV=n
+CONFIG_LPC17_UART0=y
+CONFIG_LPC17_UART1=n
+CONFIG_LPC17_UART2=n
+CONFIG_LPC17_UART3=n
+CONFIG_LPC17_CAN1=n
+CONFIG_LPC17_CAN2=n
+CONFIG_LPC17_SPI=n
+CONFIG_LPC17_SSP0=n
+CONFIG_LPC17_SSP1=n
+CONFIG_LPC17_I2C0=n
+CONFIG_LPC17_I2C1=n
+CONFIG_LPC17_I2S=n
+CONFIG_LPC17_TMR0=n
+CONFIG_LPC17_TMR1=n
+CONFIG_LPC17_TMR2=n
+CONFIG_LPC17_TMR3=n
+CONFIG_LPC17_RIT=n
+CONFIG_LPC17_PWM=n
+CONFIG_LPC17_MCPWM=n
+CONFIG_LPC17_QEI=n
+CONFIG_LPC17_RTC=n
+CONFIG_LPC17_WDT=n
+CONFIG_LPC17_ADC=n
+CONFIG_LPC17_DAC=n
+CONFIG_LPC17_GPDMA=n
+
+#
+# LPC17xx Button interrupt support
+#
+CONFIG_GPIO_IRQ=n
+CONFIG_ARCH_IRQBUTTONS=n
+
+#
+# LPC17xx specific serial device driver settings
+#
+CONFIG_UART0_SERIAL_CONSOLE=y
+CONFIG_UART1_SERIAL_CONSOLE=n
+CONFIG_UART2_SERIAL_CONSOLE=n
+CONFIG_UART3_SERIAL_CONSOLE=n
+
+CONFIG_UART0_TXBUFSIZE=256
+CONFIG_UART1_TXBUFSIZE=256
+CONFIG_UART2_TXBUFSIZE=256
+CONFIG_UART3_TXBUFSIZE=256
+
+CONFIG_UART0_RXBUFSIZE=256
+CONFIG_UART1_RXBUFSIZE=256
+CONFIG_UART2_RXBUFSIZE=256
+CONFIG_UART3_RXBUFSIZE=256
+
+CONFIG_UART0_BAUD=57600
+CONFIG_UART2_BAUD=57600
+CONFIG_UART3_BAUD=57600
+CONFIG_UART1_BAUD=57600
+
+CONFIG_UART0_BITS=8
+CONFIG_UART1_BITS=8
+CONFIG_UART2_BITS=8
+CONFIG_UART3_BITS=8
+
+CONFIG_UART0_PARITY=0
+CONFIG_UART1_PARITY=0
+CONFIG_UART2_PARITY=0
+CONFIG_UART3_PARITY=0
+
+CONFIG_UART0_2STOP=0
+CONFIG_UART1_2STOP=0
+CONFIG_UART2_2STOP=0
+CONFIG_UART3_2STOP=0
+
+#
+# LPC17xx specific PHY/Ethernet device driver settings
+#
+CONFIG_PHY_KS8721=y
+CONFIG_PHY_AUTONEG=y
+CONFIG_PHY_SPEED100=n
+CONFIG_PHY_FDUPLEX=y
+CONFIG_NET_EMACRAM_SIZE=8192
+CONFIG_NET_NTXDESC=9
+CONFIG_NET_NRXDESC=9
+CONFIG_NET_REGDEBUG=n
+
+#
+# General build options
+#
+CONFIG_RRLOAD_BINARY=n
+CONFIG_INTELHEX_BINARY=y
+CONFIG_MOTOROLA_SREC=n
+CONFIG_RAW_BINARY=n
+CONFIG_HAVE_LIBM=n
+
+#
+# General OS setup
+#
+CONFIG_USER_ENTRYPOINT="nettest_main"
+CONFIG_DEBUG=n
+CONFIG_DEBUG_VERBOSE=n
+CONFIG_DEBUG_SYMBOLS=n
+CONFIG_DEBUG_NET=n
+CONFIG_MM_REGIONS=2
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_RR_INTERVAL=200
+CONFIG_SCHED_INSTRUMENTATION=n
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_START_YEAR=2010
+CONFIG_START_MONTH=11
+CONFIG_START_DAY=10
+CONFIG_GREGORIAN_TIME=n
+CONFIG_JULIAN_TIME=n
+CONFIG_DEV_CONSOLE=y
+CONFIG_DEV_LOWCONSOLE=y
+CONFIG_MUTEX_TYPES=n
+CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_NXFLAT=n
+CONFIG_SCHED_WORKQUEUE=n
+CONFIG_SCHED_WORKPRIORITY=192
+CONFIG_SCHED_WORKPERIOD=50000
+CONFIG_SCHED_WORKSTACKSIZE=1024
+CONFIG_SIG_SIGWORK=4
+
+#
+# The following can be used to disable categories of
+# APIs supported by the OS.  If the compiler supports
+# weak functions, then it should not be necessary to
+# disable functions unless you want to restrict usage
+# of those APIs.
+#
+# There are certain dependency relationships in these
+# features.
+#
+# o mq_notify logic depends on signals to awaken tasks
+#   waiting for queues to become full or empty.
+# o pthread_condtimedwait() depends on signals to wake
+#   up waiting tasks.
+#
+CONFIG_DISABLE_CLOCK=n
+CONFIG_DISABLE_POSIX_TIMERS=n
+CONFIG_DISABLE_PTHREAD=y
+CONFIG_DISABLE_SIGNALS=n
+CONFIG_DISABLE_MQUEUE=y
+CONFIG_DISABLE_MOUNTPOINT=y
+CONFIG_DISABLE_ENVIRON=y
+CONFIG_DISABLE_POLL=y
+
+#
+# Misc libc settings
+#
+CONFIG_NOPRINTF_FIELDWIDTH=n
+
+#
+# Allow for architecture optimized implementations
+#
+# The architecture can provide optimized versions of the
+# following to improve system performance
+#
+CONFIG_ARCH_MEMCPY=n
+CONFIG_ARCH_MEMCMP=n
+CONFIG_ARCH_MEMMOVE=n
+CONFIG_ARCH_MEMSET=n
+CONFIG_ARCH_STRCMP=n
+CONFIG_ARCH_STRCPY=n
+CONFIG_ARCH_STRNCPY=n
+CONFIG_ARCH_STRLEN=n
+CONFIG_ARCH_STRNLEN=n
+CONFIG_ARCH_BZERO=n
+
+#
+# Sizes of configurable things (0 disables)
+#
+CONFIG_MAX_TASKS=8
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=0
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+CONFIG_STDIO_BUFFER_SIZE=0
+CONFIG_NUNGET_CHARS=0
+CONFIG_PREALLOC_MQ_MSGS=0
+CONFIG_MQ_MAXMSGSIZE=0
+CONFIG_MAX_WDOGPARMS=4
+CONFIG_PREALLOC_WDOGS=8
+CONFIG_PREALLOC_TIMERS=8
+
+#
+# Filesystem configuration
+#
+CONFIG_FS_FAT=n
+CONFIG_FAT_LCNAMES=n
+CONFIG_FAT_LFN=n
+CONFIG_FAT_MAXFNAME=32
+CONFIG_FS_NXFFS=n
+CONFIG_FS_ROMFS=n
+
+#
+# SPI-based MMC/SD driver
+#
+CONFIG_MMCSD_NSLOTS=1
+CONFIG_MMCSD_READONLY=n
+CONFIG_MMCSD_SPICLOCK=12500000
+
+#
+# Block driver buffering
+#
+CONFIG_FS_READAHEAD=n
+CONFIG_FS_WRITEBUFFER=n
+
+#
+# SDIO-based MMC/SD driver
+#
+CONFIG_SDIO_DMA=n
+CONFIG_MMCSD_MMCSUPPORT=n
+CONFIG_MMCSD_HAVECARDDETECT=n
+
+#
+# TCP/IP and UDP support via uIP
+#
+CONFIG_NET=y
+CONFIG_NET_IPv6=n
+CONFIG_NSOCKET_DESCRIPTORS=8
+CONFIG_NET_SOCKOPTS=y
+CONFIG_NET_BUFSIZE=420
+CONFIG_NET_TCP=y
+CONFIG_NET_TCP_CONNS=8
+CONFIG_NET_NTCP_READAHEAD_BUFFERS=8
+CONFIG_NET_TCPBACKLOG=n
+CONFIG_NET_MAX_LISTENPORTS=8
+CONFIG_NET_UDP=n
+CONFIG_NET_UDP_CHECKSUMS=y
+#CONFIG_NET_UDP_CONNS=10
+CONFIG_NET_ICMP=y
+CONFIG_NET_ICMP_PING=n
+#CONFIG_NET_PINGADDRCONF=0
+CONFIG_NET_STATISTICS=n
+#CONFIG_NET_RECEIVE_WINDOW=
+#CONFIG_NET_ARPTAB_SIZE=8
+CONFIG_NET_BROADCAST=n
+
+#
+# UIP Network Utilities
+#
+CONFIG_NET_DHCP_LIGHT=n
+CONFIG_NET_RESOLV_ENTRIES=4
+
+#
+# USB Device Configuration
+#
+CONFIG_USBDEV=n
+CONFIG_USBDEV_ISOCHRONOUS=n
+CONFIG_USBDEV_DUALSPEED=n
+CONFIG_USBDEV_SELFPOWERED=y
+CONFIG_USBDEV_REMOTEWAKEUP=n
+CONFIG_USBDEV_MAXPOWER=100
+CONFIG_USBDEV_TRACE=n
+CONFIG_USBDEV_TRACE_NRECORDS=128
+
+#
+# LPC17xx USB Configuration
+#
+CONFIG_LPC17_USBDEV_FRAME_INTERRUPT=n
+CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT=n
+CONFIG_LPC17_USBDEV_DMA=n
+CONFIG_LPC17_USBDEV_NDMADESCRIPTORS=0
+CONFIG_LPC17_USBDEV_DMAINTMASK=0
+
+#
+# USB Serial Device Configuration
+#
+CONFIG_PL2303=n
+CONFIG_PL2303_EPINTIN=1
+CONFIG_PL2303_EPBULKOUT=2
+CONFIG_PL2303_EPBULKIN=5
+CONFIG_PL2303_NWRREQS=4
+CONFIG_PL2303_NRDREQS=4
+CONFIG_PL2303_VENDORID=0x067b
+CONFIG_PL2303_PRODUCTID=0x2303
+CONFIG_PL2303_VENDORSTR="Nuttx"
+CONFIG_PL2303_PRODUCTSTR="USBdev Serial"
+CONFIG_PL2303_RXBUFSIZE=512
+CONFIG_PL2303_TXBUFSIZE=512
+
+#
+# USB Storage Device Configuration
+#
+CONFIG_USBMSC=n
+CONFIG_USBMSC_EP0MAXPACKET=64
+CONFIG_USBMSC_EPBULKOUT=2
+CONFIG_USBMSC_EPBULKIN=5
+CONFIG_USBMSC_NRDREQS=2
+CONFIG_USBMSC_NWRREQS=2
+CONFIG_USBMSC_BULKINREQLEN=256
+CONFIG_USBMSC_BULKOUTREQLEN=256
+CONFIG_USBMSC_VENDORID=0x584e
+CONFIG_USBMSC_VENDORSTR="NuttX"
+CONFIG_USBMSC_PRODUCTID=0x5342
+CONFIG_USBMSC_PRODUCTSTR="USBdev Storage"
+CONFIG_USBMSC_VERSIONNO=0x0399
+CONFIG_USBMSC_REMOVABLE=y
+
+#
+# Settings for examples/uip
+#
+CONFIG_EXAMPLE_UIP_IPADDR=0x0a000002
+CONFIG_EXAMPLE_UIP_DRIPADDR=0x0a000001
+CONFIG_EXAMPLE_UIP_NETMASK=0xffffff00
+CONFIG_EXAMPLE_UIP_DHCPC=n
+
+#
+# Settings for examples/nettest
+#
+CONFIG_EXAMPLE_NETTEST_SERVER=n
+CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
+CONFIG_EXAMPLE_NETTEST_NOMAC=y
+CONFIG_EXAMPLE_NETTEST_IPADDR=0x0a000002
+CONFIG_EXAMPLE_NETTEST_DRIPADDR=0x0a000001
+CONFIG_EXAMPLE_NETTEST_NETMASK=0xffffff00
+CONFIG_EXAMPLE_NETTEST_CLIENTIP=0x0a000001
+
+#
+# Settings for examples/ostest
+#
+CONFIG_EXAMPLES_OSTEST_LOOPS=1
+CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
+CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
+
+#
+# Settings for examples/buttons
+#
+CONFIG_EXAMPLE_BUTTONS_MIN=0
+CONFIG_EXAMPLE_BUTTONS_MAX=7
+CONFIG_EXAMPLE_IRQBUTTONS_MIN=0
+CONFIG_EXAMPLE_IRQBUTTONS_MAX=7
+CONFIG_EXAMPLE_BUTTONS_NAME0="BUT1"
+CONFIG_EXAMPLE_BUTTONS_NAME1="BUT2"
+CONFIG_EXAMPLE_BUTTONS_NAME2="WAKE-UP"
+CONFIG_EXAMPLE_BUTTONS_NAME3="CENTER"
+CONFIG_EXAMPLE_BUTTONS_NAME4="UP"
+CONFIG_EXAMPLE_BUTTONS_NAME5="DOWN"
+CONFIG_EXAMPLE_BUTTONS_NAME6="LEFT"
+CONFIG_EXAMPLE_BUTTONS_NAME7="RIGHT"
+
+#
+# Settings for apps/nshlib
+#
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_STRERROR=n
+CONFIG_NSH_LINELEN=64
+CONFIG_NSH_NESTDEPTH=3
+CONFIG_NSH_DISABLESCRIPT=n
+CONFIG_NSH_DISABLEBG=n
+CONFIG_NSH_ROMFSETC=n
+CONFIG_NSH_CONSOLE=y
+CONFIG_NSH_TELNET=n
+CONFIG_NSH_ARCHINIT=n
+CONFIG_NSH_IOBUFFER_SIZE=512
+CONFIG_NSH_DHCPC=n
+CONFIG_NSH_NOMAC=y
+CONFIG_NSH_IPADDR=0x0a000002
+CONFIG_NSH_DRIPADDR=0x0a000001
+CONFIG_NSH_NETMASK=0xffffff00
+CONFIG_NSH_ROMFSMOUNTPT="/etc"
+CONFIG_NSH_INITSCRIPT="init.d/rcS"
+CONFIG_NSH_ROMFSDEVNO=0
+CONFIG_NSH_ROMFSSECTSIZE=64
+CONFIG_NSH_FATDEVNO=1
+CONFIG_NSH_FATSECTSIZE=512
+CONFIG_NSH_FATNSECTORS=1024
+CONFIG_NSH_FATMOUNTPT="/tmp"
+
+#
+# Architecture-specific NSH options
+#
+CONFIG_NSH_MMCSDSPIPORTNO=0
+CONFIG_NSH_MMCSDSLOTNO=0
+CONFIG_NSH_MMCSDMINOR=0
+
+#
+# Settings for examples/usbserial
+#
+CONFIG_EXAMPLES_USBSERIAL_INONLY=n
+CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
+CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
+CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
+
+CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
+CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
+CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
+CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
+CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
+
+#
+# Stack and heap information
+#
+CONFIG_BOOT_RUNFROMFLASH=n
+CONFIG_BOOT_COPYTORAM=n
+CONFIG_CUSTOM_STACK=n
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+CONFIG_HEAP_BASE=
+CONFIG_HEAP_SIZE=