diff options
author | Simon Wilks <sjwilks@gmail.com> | 2013-01-25 10:44:21 +0100 |
---|---|---|
committer | Simon Wilks <sjwilks@gmail.com> | 2013-01-25 10:44:21 +0100 |
commit | bd5887b4cae08dd378c03280e6c3ddafcec729c1 (patch) | |
tree | cc7a11230ecf51c90037b922483907098232beb2 /nuttx/configs/px4fmu | |
parent | 0246842c8854fcb49ffa34bcf46c61f2b7da95b2 (diff) | |
download | px4-firmware-bd5887b4cae08dd378c03280e6c3ddafcec729c1.tar.gz px4-firmware-bd5887b4cae08dd378c03280e6c3ddafcec729c1.tar.bz2 px4-firmware-bd5887b4cae08dd378c03280e6c3ddafcec729c1.zip |
Move the config param to a more sane location (I hope).
Diffstat (limited to 'nuttx/configs/px4fmu')
-rwxr-xr-x | nuttx/configs/px4fmu/nsh/defconfig | 9 |
1 files changed, 6 insertions, 3 deletions
diff --git a/nuttx/configs/px4fmu/nsh/defconfig b/nuttx/configs/px4fmu/nsh/defconfig index d669da83a..fd783dec5 100755 --- a/nuttx/configs/px4fmu/nsh/defconfig +++ b/nuttx/configs/px4fmu/nsh/defconfig @@ -201,6 +201,12 @@ CONFIG_STM32_TIM10=y CONFIG_STM32_TIM11=y # +# Enable single wire support. If this is not defined, then this mode cannot +# be enabled. +# +CONFIG_STM32_USART_SINGLEWIRE=y + +# # We want the flash prefetch on for max performance. # STM32_FLASH_PREFETCH=y @@ -226,8 +232,6 @@ CONFIG_AT24XX_MTD_BLOCKSIZE=256 # CONFIG_SERIAL_CONSOLE_REINIT - re-initializes the console serial port # immediately after creating the /dev/console device. This is required # if the console serial port has RX DMA enabled. -# CONFIG_STM32_USART_SINGLEWIRE - Serial driver supports single wire mode. If -# this is not defined, then this mode cannot be enabled. # # CONFIG_USARTn_SERIAL_CONSOLE - selects the USARTn for the # console and ttys0 (default is the USART1). @@ -242,7 +246,6 @@ CONFIG_AT24XX_MTD_BLOCKSIZE=256 # CONFIG_SERIAL_TERMIOS=y CONFIG_SERIAL_CONSOLE_REINIT=y -CONFIG_STM32_USART_SINGLEWIRE=y CONFIG_USART1_SERIAL_CONSOLE=y CONFIG_USART2_SERIAL_CONSOLE=n |