diff options
author | px4dev <px4@purgatory.org> | 2012-10-31 00:37:15 -0700 |
---|---|---|
committer | px4dev <px4@purgatory.org> | 2012-10-31 00:37:15 -0700 |
commit | 34a3b260f34398994a315388b3ffed22a1fe22fb (patch) | |
tree | cbea6c3fff4e2701921827b122df9d348c38ac1c /nuttx/configs | |
parent | b685d46dbfc583a26a92f1466dca64f9d45c3c4e (diff) | |
download | px4-firmware-34a3b260f34398994a315388b3ffed22a1fe22fb.tar.gz px4-firmware-34a3b260f34398994a315388b3ffed22a1fe22fb.tar.bz2 px4-firmware-34a3b260f34398994a315388b3ffed22a1fe22fb.zip |
Move the last of the board-specific code for PX4FMU out of the NuttX tree. Now it's just configuration.
Diffstat (limited to 'nuttx/configs')
-rw-r--r-- | nuttx/configs/px4fmu/include/drv_led.h | 51 | ||||
-rw-r--r-- | nuttx/configs/px4fmu/nsh/appconfig | 2 | ||||
-rw-r--r-- | nuttx/configs/px4fmu/src/Makefile | 5 | ||||
-rw-r--r-- | nuttx/configs/px4fmu/src/drv_led.c | 113 | ||||
-rw-r--r-- | nuttx/configs/px4fmu/src/empty.c | 4 | ||||
-rw-r--r-- | nuttx/configs/px4fmu/src/px4fmu-internal.h | 166 | ||||
-rw-r--r-- | nuttx/configs/px4fmu/src/up_leds.c | 127 |
7 files changed, 7 insertions, 461 deletions
diff --git a/nuttx/configs/px4fmu/include/drv_led.h b/nuttx/configs/px4fmu/include/drv_led.h deleted file mode 100644 index 4b7093346..000000000 --- a/nuttx/configs/px4fmu/include/drv_led.h +++ /dev/null @@ -1,51 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -#include <sys/ioctl.h> - -#define _LEDCBASE 0x6800 -#define LEDC(_x) _IOC(_LEDCBASE, _x) - -/* set the LED identified by the argument */ -#define LED_ON LEDC(1) - -/* clear the LED identified by the argument */ -#define LED_OFF LEDC(2) - -///* toggle the LED identified by the argument */ -//#define LED_TOGGLE LEDC(3) - -#define LED_BLUE 0 /* Led on first port */ -#define LED_AMBER 1 /* Led on second port */ - -extern int px4fmu_led_init(void); diff --git a/nuttx/configs/px4fmu/nsh/appconfig b/nuttx/configs/px4fmu/nsh/appconfig index 4da9065df..5b2546911 100644 --- a/nuttx/configs/px4fmu/nsh/appconfig +++ b/nuttx/configs/px4fmu/nsh/appconfig @@ -52,7 +52,6 @@ CONFIGURED_APPS += systemcmds/top CONFIGURED_APPS += systemcmds/boardinfo CONFIGURED_APPS += systemcmds/mixer CONFIGURED_APPS += systemcmds/eeprom -CONFIGURED_APPS += systemcmds/led CONFIGURED_APPS += systemcmds/param CONFIGURED_APPS += systemcmds/bl_update #CONFIGURED_APPS += systemcmds/calibration @@ -94,6 +93,7 @@ CONFIGURED_APPS += drivers/bma180 CONFIGURED_APPS += drivers/l3gd20 CONFIGURED_APPS += drivers/px4io CONFIGURED_APPS += drivers/stm32 +CONFIGURED_APPS += drivers/led CONFIGURED_APPS += drivers/stm32/tone_alarm CONFIGURED_APPS += drivers/px4fmu diff --git a/nuttx/configs/px4fmu/src/Makefile b/nuttx/configs/px4fmu/src/Makefile index 42c931112..c3d6bf543 100644 --- a/nuttx/configs/px4fmu/src/Makefile +++ b/nuttx/configs/px4fmu/src/Makefile @@ -40,9 +40,7 @@ CFLAGS += -I$(TOPDIR)/sched ASRCS = AOBJS = $(ASRCS:.S=$(OBJEXT)) -CSRCS = up_leds.c \ - drv_led.c - +CSRCS = empty.c COBJS = $(CSRCS:.c=$(OBJEXT)) SRCS = $(ASRCS) $(CSRCS) @@ -69,6 +67,7 @@ libboard$(LIBEXT): $(OBJS) @( for obj in $(OBJS) ; do \ $(call ARCHIVE, $@, $${obj}); \ done ; ) + touch $@ .depend: Makefile $(SRCS) @$(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep diff --git a/nuttx/configs/px4fmu/src/drv_led.c b/nuttx/configs/px4fmu/src/drv_led.c deleted file mode 100644 index 13d8eb22a..000000000 --- a/nuttx/configs/px4fmu/src/drv_led.c +++ /dev/null @@ -1,113 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* - * led driver for PX4FMU - * - * This is something of an experiment currently (ha, get it?) - */ - -#include <nuttx/config.h> - -#include <stdint.h> -#include <stdbool.h> -#include <debug.h> - -#include <nuttx/spi.h> -#include <arch/board/board.h> - -#include "up_arch.h" -#include "chip.h" -#include "stm32_internal.h" -#include "px4fmu-internal.h" - -#include <arch/board/drv_led.h> - -static int px4fmu_led_ioctl(struct file *filep, int cmd, unsigned long arg); -static ssize_t px4fmu_led_pseudoread(struct file *filp, FAR char *buffer, size_t buflen); - -static const struct file_operations px4fmu_led_fops = { - .read = px4fmu_led_pseudoread, - .ioctl = px4fmu_led_ioctl, -}; - -int -px4fmu_led_init(void) -{ - /* register the driver */ - return register_driver("/dev/led", &px4fmu_led_fops, 0666, NULL); -} - -static ssize_t -px4fmu_led_pseudoread(struct file *filp, FAR char *buffer, size_t buflen) -{ - return 0; -} - -static int -px4fmu_led_ioctl(struct file *filep, int cmd, unsigned long arg) -{ - int result = 0; - - switch (cmd) { - - case LED_ON: - switch (arg) { - case 0: - case 1: - up_ledon(arg); - break; - default: - result = -1; - break; - } - break; - - case LED_OFF: - switch (arg) { - case 0: - case 1: - up_ledoff(arg); - break; - default: - result = -1; - break; - } - break; - default: - result = -1; - break; - } - return result; -} - diff --git a/nuttx/configs/px4fmu/src/empty.c b/nuttx/configs/px4fmu/src/empty.c new file mode 100644 index 000000000..ace900866 --- /dev/null +++ b/nuttx/configs/px4fmu/src/empty.c @@ -0,0 +1,4 @@ +/* + * There are no source files here, but libboard.a can't be empty, so + * we have this empty source file to keep it company. + */ diff --git a/nuttx/configs/px4fmu/src/px4fmu-internal.h b/nuttx/configs/px4fmu/src/px4fmu-internal.h deleted file mode 100644 index f48b1bf5e..000000000 --- a/nuttx/configs/px4fmu/src/px4fmu-internal.h +++ /dev/null @@ -1,166 +0,0 @@ -/**************************************************************************************************** - * configs/px4fmu/src/px4fmu_internal.h - * arch/arm/src/board/px4fmu_internal.n - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************************************/ - -#ifndef __CONFIGS_PX4FMU_SRC_PX4FMU_INTERNAL_H -#define __CONFIGS_PX4FMU_SRC_PX4FMU_INTERNAL_H - -/**************************************************************************************************** - * Included Files - ****************************************************************************************************/ - -#include <nuttx/config.h> -#include <nuttx/compiler.h> -#include <stdint.h> - -/**************************************************************************************************** - * Definitions - ****************************************************************************************************/ -/* Configuration ************************************************************************************/ - -#ifdef CONFIG_STM32_SPI2 -# error "SPI2 is not supported on this board" -#endif - -#if defined(CONFIG_STM32_CAN1) -# warning "CAN1 is not supported on this board" -#endif - -/* PX4FMU GPIOs ***********************************************************************************/ -/* LEDs */ - -#define GPIO_LED1 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN15) -#define GPIO_LED2 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN14) - -/* External interrupts */ -#define GPIO_EXTI_COMPASS (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTB|GPIO_PIN1) -// XXX MPU6000 DRDY? - -/* SPI chip selects */ -#define GPIO_SPI_CS_GYRO (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN14) -#define GPIO_SPI_CS_ACCEL (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN15) -#define GPIO_SPI_CS_MPU (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN0) -#define GPIO_SPI_CS_SDCARD (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN4) - -/* User GPIOs - * - * GPIO0-1 are the buffered high-power GPIOs. - * GPIO2-5 are the USART2 pins. - * GPIO6-7 are the CAN2 pins. - */ -#define GPIO_GPIO0_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN4) -#define GPIO_GPIO1_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN5) -#define GPIO_GPIO2_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTA|GPIO_PIN0) -#define GPIO_GPIO3_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTA|GPIO_PIN1) -#define GPIO_GPIO4_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTA|GPIO_PIN2) -#define GPIO_GPIO5_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTA|GPIO_PIN3) -#define GPIO_GPIO6_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN13) -#define GPIO_GPIO7_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN2) -#define GPIO_GPIO0_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN4) -#define GPIO_GPIO1_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN5) -#define GPIO_GPIO2_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN0) -#define GPIO_GPIO3_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN1) -#define GPIO_GPIO4_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN2) -#define GPIO_GPIO5_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN3) -#define GPIO_GPIO6_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN13) -#define GPIO_GPIO7_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN12) -#define GPIO_GPIO_DIR (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN13) - -/* USB OTG FS - * - * PA9 OTG_FS_VBUS VBUS sensing (also connected to the green LED) - */ -#define GPIO_OTGFS_VBUS (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_OPENDRAIN|GPIO_PORTA|GPIO_PIN9) - -/* PWM - * - * The PX4FMU has five PWM outputs, of which only the output on - * pin PC8 is fixed assigned to this function. The other four possible - * pwm sources are the TX, RX, RTS and CTS pins of USART2 - * - * Alternate function mapping: - * PC8 - BUZZER - TIM8_CH3/SDIO_D0 /TIM3_CH3/ USART6_CK / DCMI_D2 - */ - -#ifdef CONFIG_PWM -# if defined(CONFIG_STM32_TIM3_PWM) -# define BUZZER_PWMCHANNEL 3 -# define BUZZER_PWMTIMER 3 -# elif defined(CONFIG_STM32_TIM8_PWM) -# define BUZZER_PWMCHANNEL 3 -# define BUZZER_PWMTIMER 8 -# endif -#endif - -/**************************************************************************************************** - * Public Types - ****************************************************************************************************/ - -/**************************************************************************************************** - * Public data - ****************************************************************************************************/ - -#ifndef __ASSEMBLY__ - -/**************************************************************************************************** - * Public Functions - ****************************************************************************************************/ - -/**************************************************************************************************** - * Name: stm32_spiinitialize - * - * Description: - * Called to configure SPI chip select GPIO pins for the PX4FMU board. - * - ****************************************************************************************************/ - -extern void stm32_spiinitialize(void); - -/**************************************************************************************************** - * Name: px4fmu_gpio_init - * - * Description: - * Called to configure the PX4FMU user GPIOs - * - ****************************************************************************************************/ - -extern void px4fmu_gpio_init(void); - - -// XXX additional SPI chipselect functions required? - -#endif /* __ASSEMBLY__ */ -#endif /* __CONFIGS_PX4FMU_SRC_PX4FMU_INTERNAL_H */ - diff --git a/nuttx/configs/px4fmu/src/up_leds.c b/nuttx/configs/px4fmu/src/up_leds.c deleted file mode 100644 index f7b76aa58..000000000 --- a/nuttx/configs/px4fmu/src/up_leds.c +++ /dev/null @@ -1,127 +0,0 @@ -/**************************************************************************** - * configs/px4fmu/src/up_leds.c - * arch/arm/src/board/up_leds.c - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/**************************************************************************** - * Included Files - ****************************************************************************/ - -#include <nuttx/config.h> - -#include <stdint.h> -#include <stdbool.h> -#include <debug.h> - -#include <arch/board/board.h> - -#include "chip.h" -#include "up_arch.h" -#include "up_internal.h" -#include "stm32_internal.h" -#include "px4fmu-internal.h" - -/**************************************************************************** - * Definitions - ****************************************************************************/ - -/* Enables debug output from this file (needs CONFIG_DEBUG with - * CONFIG_DEBUG_VERBOSE too) - */ - -#undef LED_DEBUG /* Define to enable debug */ - -#ifdef LED_DEBUG -# define leddbg lldbg -# define ledvdbg llvdbg -#else -# define leddbg(x...) -# define ledvdbg(x...) -#endif - - -/**************************************************************************** - * Public Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: up_ledinit - ****************************************************************************/ - -#ifdef CONFIG_ARCH_LEDS -void up_ledinit(void) -{ - /* Configure LED1-2 GPIOs for output */ - - stm32_configgpio(GPIO_LED1); - stm32_configgpio(GPIO_LED2); -} - -/**************************************************************************** - * Name: up_ledon - ****************************************************************************/ - -void up_ledon(int led) -{ - if (led == 0) - { - /* Pull down to switch on */ - stm32_gpiowrite(GPIO_LED1, false); - } - if (led == 1) - { - /* Pull down to switch on */ - stm32_gpiowrite(GPIO_LED2, false); - } -} - -/**************************************************************************** - * Name: up_ledoff - ****************************************************************************/ - -void up_ledoff(int led) -{ - if (led == 0) - { - /* Pull up to switch off */ - stm32_gpiowrite(GPIO_LED1, true); - } - if (led == 1) - { - /* Pull up to switch off */ - stm32_gpiowrite(GPIO_LED2, true); - } -} - -#endif /* CONFIG_ARCH_LEDS */ |