diff options
author | px4dev <px4@purgatory.org> | 2012-08-18 22:06:17 -0700 |
---|---|---|
committer | px4dev <px4@purgatory.org> | 2012-08-19 01:31:26 -0700 |
commit | 7b4b3f7bf772df76f8f4c537d654429622e1ae25 (patch) | |
tree | f2a484c8b20e06e10a72a1b528c16bc3dda08c51 /nuttx/configs | |
parent | d91f5f3dd7d80b690956d02807aa74253aebe19c (diff) | |
download | px4-firmware-7b4b3f7bf772df76f8f4c537d654429622e1ae25.tar.gz px4-firmware-7b4b3f7bf772df76f8f4c537d654429622e1ae25.tar.bz2 px4-firmware-7b4b3f7bf772df76f8f4c537d654429622e1ae25.zip |
Kill off the old EEPROM driver's support for the on-board parameter EEPROM.
Diffstat (limited to 'nuttx/configs')
-rwxr-xr-x | nuttx/configs/px4fmu/include/board.h | 2 | ||||
-rw-r--r-- | nuttx/configs/px4fmu/include/drv_eeprom.h | 25 | ||||
-rw-r--r-- | nuttx/configs/px4fmu/src/up_nsh.c | 5 |
3 files changed, 11 insertions, 21 deletions
diff --git a/nuttx/configs/px4fmu/include/board.h b/nuttx/configs/px4fmu/include/board.h index 0db8580ba..29ad52c61 100755 --- a/nuttx/configs/px4fmu/include/board.h +++ b/nuttx/configs/px4fmu/include/board.h @@ -289,7 +289,7 @@ */ #define PX4_I2C_OBDEV_HMC5883 0x1e #define PX4_I2C_OBDEV_MS5611 NOTDEFINED -#define PX4_I2C_OBDEV_EEPROM 0x50 +#define PX4_I2C_OBDEV_EEPROM NOTDEFINED #define PX4_I2C_OBDEV_PX4IO_BL 0x18 #define PX4_I2C_OBDEV_PX4IO 0x19 diff --git a/nuttx/configs/px4fmu/include/drv_eeprom.h b/nuttx/configs/px4fmu/include/drv_eeprom.h index e6801f6c4..57589ed84 100644 --- a/nuttx/configs/px4fmu/include/drv_eeprom.h +++ b/nuttx/configs/px4fmu/include/drv_eeprom.h @@ -31,34 +31,21 @@ * ****************************************************************************/ -/* - * Driver for the ST MS5611 gyroscope - */ - -/* IMPORTANT NOTES: - * - * SPI max. clock frequency: 10 Mhz - * CS has to be high before transfer, - * go low right before transfer and - * go high again right after transfer +/** + * @file drv_eeprom.h * + * Config for the non-MTD EEPROM driver. */ /* IMPORTANT: Adjust this number! */ -#define MAX_EEPROMS 2 +#define MAX_EEPROMS 2 /* FMU onboard */ -#define FMU_ONBOARD_EEPROM_ADDRESS 0x50 -#define FMU_ONBOARD_EEPROM_TOTAL_SIZE_BYTES 16000 -#define FMU_ONBOARD_EEPROM_PAGE_SIZE_BYTES 64 -#define FMU_ONBOARD_EEPROM_PAGE_WRITE_TIME_US 5500 -#define FMU_ONBOARD_EEPROM_BUS_CLOCK 1000000 ///< 1 Mhz max. clock - -#define FMU_BASEBOARD_EEPROM_ADDRESS 0x57 +#define FMU_BASEBOARD_EEPROM_ADDRESS 0x57 #define FMU_BASEBOARD_EEPROM_TOTAL_SIZE_BYTES 128 #define FMU_BASEBOARD_EEPROM_PAGE_SIZE_BYTES 8 #define FMU_BASEBOARD_EEPROM_PAGE_WRITE_TIME_US 3300 -#define FMU_BASEBOARD_EEPROM_BUS_CLOCK 400000 ///< 400 KHz max. clock +#define FMU_BASEBOARD_EEPROM_BUS_CLOCK 400000 ///< 400 KHz max. clock /** * @brief i2c I2C bus struct diff --git a/nuttx/configs/px4fmu/src/up_nsh.c b/nuttx/configs/px4fmu/src/up_nsh.c index d089f2df3..d185bf7f1 100644 --- a/nuttx/configs/px4fmu/src/up_nsh.c +++ b/nuttx/configs/px4fmu/src/up_nsh.c @@ -290,6 +290,7 @@ int nsh_archinitialize(void) FMU_BASEBOARD_EEPROM_PAGE_SIZE_BYTES, FMU_BASEBOARD_EEPROM_PAGE_WRITE_TIME_US, "/dev/baseboard_eeprom", 1); +#if 0 int eeprom_attempts = 0; int eeprom_fail; while (eeprom_attempts < 5) @@ -306,8 +307,10 @@ int nsh_archinitialize(void) if (eeprom_fail) message("[boot] FAILED to attach FMU EEPROM\r\n"); +#endif + /* Report back sensor status */ - if (gyro_fail || mag_fail || baro_fail || eeprom_fail) + if (gyro_fail || mag_fail || baro_fail/* || eeprom_fail*/) { up_ledon(LED_AMBER); } |