Resync new repository with old repo r5166

git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5153 42af7a65-404d-4744-a932-0658087f49c3

1 files changed, 2242 insertions, 0 deletions

diff --git a/nuttx/drivers/usbdev/pl2303.c b/nuttx/drivers/usbdev/pl2303.c
new file mode 100644
index 000000000..69bf87965
--- /dev/null
+++ b/nuttx/drivers/usbdev/pl2303.c
@@ -0,0 +1,2242 @@
+/****************************************************************************
+ * drivers/usbdev/pl2303.c
+ *
+ *   Copyright (C) 2008-2012 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * This logic emulates the Prolific PL2303 serial/USB converter
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <sys/types.h>
+#include <stdint.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <semaphore.h>
+#include <string.h>
+#include <errno.h>
+#include <queue.h>
+#include <debug.h>
+
+#include <nuttx/kmalloc.h>
+#include <nuttx/arch.h>
+#include <nuttx/serial/serial.h>
+#include <nuttx/usb/usb.h>
+#include <nuttx/usb/usbdev.h>
+#include <nuttx/usb/usbdev_trace.h>
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/* Configuration ************************************************************/
+
+/* Number of requests in the write queue */
+
+#ifndef CONFIG_PL2303_NWRREQS
+#  define CONFIG_PL2303_NWRREQS 4
+#endif
+
+/* Number of requests in the read queue */
+
+#ifndef CONFIG_PL2303_NRDREQS
+#  define CONFIG_PL2303_NRDREQS 4
+#endif
+
+/* Logical endpoint numbers / max packet sizes */
+
+#ifndef CONFIG_PL2303_EPINTIN
+#  warning "EPINTIN not defined in the configuration"
+#  define CONFIG_PL2303_EPINTIN 1
+#endif
+
+#ifndef CONFIG_PL2303_EPBULKOUT
+#  warning "EPBULKOUT not defined in the configuration"
+#  define CONFIG_PL2303_EPBULKOUT 2
+#endif
+
+#ifndef CONFIG_PL2303_EPBULKIN
+#  warning "EPBULKIN not defined in the configuration"
+#  define CONFIG_PL2303_EPBULKIN 3
+#endif
+
+/* Packet and request buffer sizes */
+
+#ifndef CONFIG_PL2303_EP0MAXPACKET
+#  define CONFIG_PL2303_EP0MAXPACKET 64
+#endif
+
+#undef CONFIG_PL2303_BULKREQLEN
+
+/* Vendor and product IDs and strings */
+
+#ifndef CONFIG_PL2303_VENDORID
+#  define CONFIG_PL2303_VENDORID  0x067b
+#endif
+
+#ifndef CONFIG_PL2303_PRODUCTID
+#  define CONFIG_PL2303_PRODUCTID 0x2303
+#endif
+
+#ifndef CONFIG_PL2303_VENDORSTR
+#  warning "No Vendor string specified"
+#  define CONFIG_PL2303_VENDORSTR  "NuttX"
+#endif
+
+#ifndef CONFIG_PL2303_PRODUCTSTR
+#  warning "No Product string specified"
+#  define CONFIG_PL2303_PRODUCTSTR "USBdev Serial"
+#endif
+
+#undef CONFIG_PL2303_SERIALSTR
+#define CONFIG_PL2303_SERIALSTR "0"
+
+#undef CONFIG_PL2303_CONFIGSTR
+#define CONFIG_PL2303_CONFIGSTR "Bulk"
+
+/* USB Controller */
+
+#ifndef CONFIG_USBDEV_SELFPOWERED
+#  define SELFPOWERED USB_CONFIG_ATT_SELFPOWER
+#else
+#  define SELFPOWERED (0)
+#endif
+
+#ifndef CONFIG_USBDEV_REMOTEWAKEUP
+#  define REMOTEWAKEUP USB_CONFIG_ATTR_WAKEUP
+#else
+#  define REMOTEWAKEUP (0)
+#endif
+
+#ifndef CONFIG_USBDEV_MAXPOWER
+#  define CONFIG_USBDEV_MAXPOWER 100
+#endif
+
+/* Descriptors ****************************************************************/
+
+/* These settings are not modifiable via the NuttX configuration */
+
+#define PL2303_VERSIONNO           (0x0202) /* Device version number */
+#define PL2303_CONFIGIDNONE        (0)      /* Config ID means to return to address mode */
+#define PL2303_CONFIGID            (1)      /* The only supported configuration ID */
+#define PL2303_NCONFIGS            (1)      /* Number of configurations supported */
+#define PL2303_INTERFACEID         (0)
+#define PL2303_ALTINTERFACEID      (0)
+#define PL2303_NINTERFACES         (1)      /* Number of interfaces in the configuration */
+#define PL2303_NENDPOINTS          (3)      /* Number of endpoints in the interface  */
+
+/* Endpoint configuration */
+
+#define PL2303_EPINTIN_ADDR        (USB_DIR_IN|CONFIG_PL2303_EPINTIN)
+#define PL2303_EPINTIN_ATTR        (USB_EP_ATTR_XFER_INT)
+#define PL2303_EPINTIN_MXPACKET    (10)
+
+#define PL2303_EPOUTBULK_ADDR      (CONFIG_PL2303_EPBULKOUT)
+#define PL2303_EPOUTBULK_ATTR      (USB_EP_ATTR_XFER_BULK)
+
+#define PL2303_EPINBULK_ADDR       (USB_DIR_IN|CONFIG_PL2303_EPBULKIN)
+#define PL2303_EPINBULK_ATTR       (USB_EP_ATTR_XFER_BULK)
+
+/* String language */
+
+#define PL2303_STR_LANGUAGE        (0x0409) /* en-us */
+
+/* Descriptor strings */
+
+#define PL2303_MANUFACTURERSTRID   (1)
+#define PL2303_PRODUCTSTRID        (2)
+#define PL2303_SERIALSTRID         (3)
+#define PL2303_CONFIGSTRID         (4)
+
+/* Buffer big enough for any of our descriptors */
+
+#define PL2303_MXDESCLEN           (64)
+
+/* Vender specific control requests *******************************************/
+
+#define PL2303_CONTROL_TYPE        (0x20)
+#define PL2303_SETLINEREQUEST      (0x20) /* OUT, Recipient interface */
+#define PL2303_GETLINEREQUEST      (0x21) /* IN, Recipient interface */
+#define PL2303_SETCONTROLREQUEST   (0x22) /* OUT, Recipient interface */
+#define PL2303_BREAKREQUEST        (0x23) /* OUT, Recipient interface */
+
+/* Vendor read/write */
+
+#define PL2303_RWREQUEST_TYPE      (0x40)
+#define PL2303_RWREQUEST           (0x01) /* IN/OUT, Recipient device */
+
+/* Misc Macros ****************************************************************/
+
+/* min/max macros */
+
+#ifndef min
+#  define min(a,b) ((a)<(b)?(a):(b))
+#endif
+
+#ifndef max
+#  define max(a,b) ((a)>(b)?(a):(b))
+#endif
+
+/* Trace values *************************************************************/
+
+#define PL2303_CLASSAPI_SETUP       TRACE_EVENT(TRACE_CLASSAPI_ID, USBSER_TRACECLASSAPI_SETUP)
+#define PL2303_CLASSAPI_SHUTDOWN    TRACE_EVENT(TRACE_CLASSAPI_ID, USBSER_TRACECLASSAPI_SHUTDOWN)
+#define PL2303_CLASSAPI_ATTACH      TRACE_EVENT(TRACE_CLASSAPI_ID, USBSER_TRACECLASSAPI_ATTACH)
+#define PL2303_CLASSAPI_DETACH      TRACE_EVENT(TRACE_CLASSAPI_ID, USBSER_TRACECLASSAPI_DETACH)
+#define PL2303_CLASSAPI_IOCTL       TRACE_EVENT(TRACE_CLASSAPI_ID, USBSER_TRACECLASSAPI_IOCTL)
+#define PL2303_CLASSAPI_RECEIVE     TRACE_EVENT(TRACE_CLASSAPI_ID, USBSER_TRACECLASSAPI_RECEIVE)
+#define PL2303_CLASSAPI_RXINT       TRACE_EVENT(TRACE_CLASSAPI_ID, USBSER_TRACECLASSAPI_RXINT)
+#define PL2303_CLASSAPI_RXAVAILABLE TRACE_EVENT(TRACE_CLASSAPI_ID, USBSER_TRACECLASSAPI_RXAVAILABLE)
+#define PL2303_CLASSAPI_SEND        TRACE_EVENT(TRACE_CLASSAPI_ID, USBSER_TRACECLASSAPI_SEND)
+#define PL2303_CLASSAPI_TXINT       TRACE_EVENT(TRACE_CLASSAPI_ID, USBSER_TRACECLASSAPI_TXINT)
+#define PL2303_CLASSAPI_TXREADY     TRACE_EVENT(TRACE_CLASSAPI_ID, USBSER_TRACECLASSAPI_TXREADY)
+#define PL2303_CLASSAPI_TXEMPTY     TRACE_EVENT(TRACE_CLASSAPI_ID, USBSER_TRACECLASSAPI_TXEMPTY)
+
+/****************************************************************************
+ * Private Types
+ ****************************************************************************/
+
+/* Container to support a list of requests */
+
+struct pl2303_req_s
+{
+  FAR struct pl2303_req_s *flink;     /* Implements a singly linked list */
+  FAR struct usbdev_req_s *req;       /* The contained request */
+};
+
+/* This structure describes the internal state of the driver */
+
+struct pl2303_dev_s
+{
+  FAR struct uart_dev_s    serdev;    /* Serial device structure */
+  FAR struct usbdev_s     *usbdev;    /* usbdev driver pointer */
+
+  uint8_t config;                     /* Configuration number */
+  uint8_t nwrq;                       /* Number of queue write requests (in reqlist)*/
+  uint8_t nrdq;                       /* Number of queue read requests (in epbulkout) */
+  bool    rxenabled;                  /* true: UART RX "interrupts" enabled */
+  uint8_t linest[7];                  /* Fake line status */
+  int16_t rxhead;                     /* Working head; used when rx int disabled */
+
+  FAR struct usbdev_ep_s  *epintin;   /* Interrupt IN endpoint structure */
+  FAR struct usbdev_ep_s  *epbulkin;  /* Bulk IN endpoint structure */
+  FAR struct usbdev_ep_s  *epbulkout; /* Bulk OUT endpoint structure */
+  FAR struct usbdev_req_s *ctrlreq;   /* Control request */
+  struct sq_queue_s        reqlist;   /* List of write request containers */
+
+  /* Pre-allocated write request containers.  The write requests will
+   * be linked in a free list (reqlist), and used to send requests to
+   * EPBULKIN; Read requests will be queued in the EBULKOUT.
+   */
+
+  struct pl2303_req_s wrreqs[CONFIG_PL2303_NWRREQS];
+  struct pl2303_req_s rdreqs[CONFIG_PL2303_NWRREQS];
+
+  /* Serial I/O buffers */
+
+  char rxbuffer[CONFIG_PL2303_RXBUFSIZE];
+  char txbuffer[CONFIG_PL2303_TXBUFSIZE];
+};
+
+/* The internal version of the class driver */
+
+struct pl2303_driver_s
+{
+  struct usbdevclass_driver_s drvr;
+  FAR struct pl2303_dev_s     *dev;
+};
+
+/* This is what is allocated */
+
+struct pl2303_alloc_s
+{
+  struct pl2303_dev_s    dev;
+  struct pl2303_driver_s drvr;
+};
+
+/****************************************************************************
+ * Private Function Prototypes
+ ****************************************************************************/
+
+/* Transfer helpers *********************************************************/
+
+static uint16_t usbclass_fillrequest(FAR struct pl2303_dev_s *priv,
+                 uint8_t *reqbuf, uint16_t reqlen);
+static int     usbclass_sndpacket(FAR struct pl2303_dev_s *priv);
+static inline int usbclass_recvpacket(FAR struct pl2303_dev_s *priv,
+                 uint8_t *reqbuf, uint16_t reqlen);
+
+/* Request helpers *********************************************************/
+
+static struct  usbdev_req_s *usbclass_allocreq(FAR struct usbdev_ep_s *ep,
+                 uint16_t len);
+static void    usbclass_freereq(FAR struct usbdev_ep_s *ep,
+                 FAR struct usbdev_req_s *req);
+
+/* Configuration ***********************************************************/
+
+static int     usbclass_mkstrdesc(uint8_t id, struct usb_strdesc_s *strdesc);
+#ifdef CONFIG_USBDEV_DUALSPEED
+static void    usbclass_mkepbulkdesc(const struct usb_epdesc_s *indesc,
+                 uint16_t mxpacket, struct usb_epdesc_s *outdesc);
+static int16_t usbclass_mkcfgdesc(uint8_t *buf, uint8_t speed, uint8_t type);
+#else
+static int16_t usbclass_mkcfgdesc(uint8_t *buf);
+#endif
+static void    usbclass_resetconfig(FAR struct pl2303_dev_s *priv);
+static int     usbclass_setconfig(FAR struct pl2303_dev_s *priv,
+                 uint8_t config);
+
+/* Completion event handlers ***********************************************/
+
+static void    usbclass_ep0incomplete(FAR struct usbdev_ep_s *ep,
+                 FAR struct usbdev_req_s *req);
+static void    usbclass_rdcomplete(FAR struct usbdev_ep_s *ep,
+                 FAR struct usbdev_req_s *req);
+static void    usbclass_wrcomplete(FAR struct usbdev_ep_s *ep,
+                 FAR struct usbdev_req_s *req);
+
+/* USB class device ********************************************************/
+
+static int     usbclass_bind(FAR struct usbdevclass_driver_s *driver, 
+                 FAR struct usbdev_s *dev);
+static void    usbclass_unbind(FAR struct usbdevclass_driver_s *driver,
+                 FAR struct usbdev_s *dev);
+static int     usbclass_setup(FAR struct usbdevclass_driver_s *driver,
+                 FAR struct usbdev_s *dev,
+                 FAR const struct usb_ctrlreq_s *ctrl, FAR uint8_t *dataout,
+                 size_t outlen);
+static void    usbclass_disconnect(FAR struct usbdevclass_driver_s *driver,
+                 FAR struct usbdev_s *dev);
+
+/* Serial port *************************************************************/
+
+static int     usbser_setup(FAR struct uart_dev_s *dev);
+static void    usbser_shutdown(FAR struct uart_dev_s *dev);
+static int     usbser_attach(FAR struct uart_dev_s *dev);
+static void    usbser_detach(FAR struct uart_dev_s *dev);
+static void    usbser_rxint(FAR struct uart_dev_s *dev, bool enable);
+static void    usbser_txint(FAR struct uart_dev_s *dev, bool enable);
+static bool    usbser_txempty(FAR struct uart_dev_s *dev);
+
+/****************************************************************************
+ * Private Variables
+ ****************************************************************************/
+
+/* USB class device ********************************************************/
+
+static const struct usbdevclass_driverops_s g_driverops =
+{
+  usbclass_bind,        /* bind */
+  usbclass_unbind,      /* unbind */
+  usbclass_setup,       /* setup */
+  usbclass_disconnect,  /* disconnect */
+  NULL,                 /* suspend */
+  NULL,                 /* resume */
+};
+
+/* Serial port *************************************************************/
+
+static const struct uart_ops_s g_uartops =
+{
+  usbser_setup,         /* setup */
+  usbser_shutdown,      /* shutdown */
+  usbser_attach,        /* attach */
+  usbser_detach,        /* detach */
+  NULL,                 /* ioctl */
+  NULL,                 /* receive */
+  usbser_rxint,         /* rxinit */
+  NULL,                 /* rxavailable */
+  NULL,                 /* send */
+  usbser_txint,         /* txinit */
+  NULL,                 /* txready */
+  usbser_txempty        /* txempty */
+};
+
+/* USB descriptor templates these will be copied and modified **************/
+
+static const struct usb_devdesc_s g_devdesc =
+{
+  USB_SIZEOF_DEVDESC,                           /* len */
+  USB_DESC_TYPE_DEVICE,                         /* type */
+  {LSBYTE(0x0200), MSBYTE(0x0200)},             /* usb */
+  USB_CLASS_PER_INTERFACE,                      /* classid */
+  0,                                            /* subclass */
+  0,                                            /* protocol */
+  CONFIG_PL2303_EP0MAXPACKET,                   /* maxpacketsize */
+  { LSBYTE(CONFIG_PL2303_VENDORID),             /* vendor */
+    MSBYTE(CONFIG_PL2303_VENDORID) },
+  { LSBYTE(CONFIG_PL2303_PRODUCTID),            /* product */
+    MSBYTE(CONFIG_PL2303_PRODUCTID) },
+  { LSBYTE(PL2303_VERSIONNO),                   /* device */
+    MSBYTE(PL2303_VERSIONNO) },
+  PL2303_MANUFACTURERSTRID,                     /* imfgr */
+  PL2303_PRODUCTSTRID,                          /* iproduct */
+  PL2303_SERIALSTRID,                           /* serno */
+  PL2303_NCONFIGS                               /* nconfigs */
+};
+
+static const struct usb_cfgdesc_s g_cfgdesc =
+{
+  USB_SIZEOF_CFGDESC,                           /* len */
+  USB_DESC_TYPE_CONFIG,                         /* type */
+  {0, 0},                                       /* totallen -- to be provided */
+  PL2303_NINTERFACES,                           /* ninterfaces */
+  PL2303_CONFIGID,                              /* cfgvalue */
+  PL2303_CONFIGSTRID,                           /* icfg */
+  USB_CONFIG_ATTR_ONE|SELFPOWERED|REMOTEWAKEUP, /* attr */
+  (CONFIG_USBDEV_MAXPOWER + 1) / 2              /* mxpower */
+};
+
+static const struct usb_ifdesc_s g_ifdesc =
+{
+  USB_SIZEOF_IFDESC,                            /* len */
+  USB_DESC_TYPE_INTERFACE,                      /* type */
+  0,                                            /* ifno */
+  0,                                            /* alt */
+  PL2303_NENDPOINTS,                            /* neps */
+  USB_CLASS_VENDOR_SPEC,                        /* classid */
+  0,                                            /* subclass */
+  0,                                            /* protocol */
+  PL2303_CONFIGSTRID                            /* iif */
+};
+
+static const struct usb_epdesc_s g_epintindesc =
+{
+  USB_SIZEOF_EPDESC,                            /* len */
+  USB_DESC_TYPE_ENDPOINT,                       /* type */
+  PL2303_EPINTIN_ADDR,                          /* addr */
+  PL2303_EPINTIN_ATTR,                          /* attr */
+  { LSBYTE(PL2303_EPINTIN_MXPACKET),            /* maxpacket */
+    MSBYTE(PL2303_EPINTIN_MXPACKET) },
+  1                                             /* interval */
+};
+
+static const struct usb_epdesc_s g_epbulkoutdesc =
+{
+  USB_SIZEOF_EPDESC,                            /* len */
+  USB_DESC_TYPE_ENDPOINT,                       /* type */
+  PL2303_EPOUTBULK_ADDR,                        /* addr */
+  PL2303_EPOUTBULK_ATTR,                        /* attr */
+  { LSBYTE(64), MSBYTE(64) },                   /* maxpacket -- might change to 512*/
+  0                                             /* interval */
+};
+
+static const struct usb_epdesc_s g_epbulkindesc =
+{
+  USB_SIZEOF_EPDESC,                            /* len */
+  USB_DESC_TYPE_ENDPOINT,                       /* type */
+  PL2303_EPINBULK_ADDR,                         /* addr */
+  PL2303_EPINBULK_ATTR,                         /* attr */
+  { LSBYTE(64), MSBYTE(64) },                   /* maxpacket -- might change to 512*/
+  0                                             /* interval */
+};
+
+#ifdef CONFIG_USBDEV_DUALSPEED
+static const struct usb_qualdesc_s g_qualdesc =
+{
+  USB_SIZEOF_QUALDESC,                          /* len */
+  USB_DESC_TYPE_DEVICEQUALIFIER,                /* type */
+  {LSBYTE(0x0200), MSBYTE(0x0200) },            /* USB */
+  USB_CLASS_VENDOR_SPEC,                        /* classid */
+  0,                                            /* subclass */
+  0,                                            /* protocol */
+  CONFIG_PL2303_EP0MAXPACKET,                   /* mxpacketsize */
+  PL2303_NCONFIGS,                              /* nconfigs */
+  0,                                            /* reserved */
+};
+#endif
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/************************************************************************************
+ * Name: usbclass_fillrequest
+ *
+ * Description:
+ *   If there is data to send it is copied to the given buffer.  Called either
+ *   to initiate the first write operation, or from the completion interrupt handler
+ *   service consecutive write operations.
+ *
+ * NOTE: The USB serial driver does not use the serial drivers uart_xmitchars()
+ *   API.  That logic is essentially duplicated here because unlike UART hardware,
+ *   we need to be able to handle writes not byte-by-byte, but packet-by-packet.
+ *   Unfortunately, that decision also exposes some internals of the serial driver
+ *   in the following.
+ *
+ ************************************************************************************/
+
+static uint16_t usbclass_fillrequest(FAR struct pl2303_dev_s *priv, uint8_t *reqbuf,
+                                     uint16_t reqlen)
+{
+  FAR uart_dev_t *serdev = &priv->serdev;
+  FAR struct uart_buffer_s *xmit = &serdev->xmit;
+  irqstate_t flags;
+  uint16_t nbytes = 0;
+
+  /* Disable interrupts */
+
+  flags = irqsave();
+
+  /* Transfer bytes while we have bytes available and there is room in the request */
+
+  while (xmit->head != xmit->tail && nbytes < reqlen)
+    {
+      *reqbuf++ = xmit->buffer[xmit->tail];
+      nbytes++;
+
+      /* Increment the tail pointer */
+
+      if (++(xmit->tail) >= xmit->size)
+        {
+          xmit->tail = 0;
+        }
+    }
+
+  /* When all of the characters have been sent from the buffer
+   * disable the "TX interrupt".
+   */
+
+  if (xmit->head == xmit->tail)
+    {
+      uart_disabletxint(serdev);
+    }
+
+  /* If any bytes were removed from the buffer, inform any waiters
+   * there there is space available.
+   */
+
+  if (nbytes)
+    {
+      uart_datasent(serdev);
+    }
+
+  irqrestore(flags);
+  return nbytes;
+}
+
+/************************************************************************************
+ * Name: usbclass_sndpacket
+ *
+ * Description:
+ *   This function obtains write requests, transfers the TX data into the request,
+ *   and submits the requests to the USB controller.  This continues untils either
+ *   (1) there are no further packets available, or (2) thre is not further data
+ *   to send.
+ *
+ ************************************************************************************/
+
+static int usbclass_sndpacket(FAR struct pl2303_dev_s *priv)
+{
+  FAR struct usbdev_ep_s *ep;
+  FAR struct usbdev_req_s *req;
+  FAR struct pl2303_req_s *reqcontainer;
+  uint16_t reqlen;
+  irqstate_t flags;
+  int len;
+  int ret = OK;
+
+#ifdef CONFIG_DEBUG
+  if (priv == NULL)
+    {
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_INVALIDARG), 0);
+      return -ENODEV;
+    }
+#endif
+
+  flags = irqsave();
+
+  /* Use our IN endpoint for the transfer */
+
+  ep = priv->epbulkin;
+
+  /* Loop until either (1) we run out or write requests, or (2) usbclass_fillrequest()
+   * is unable to fill the request with data (i.e., until there is no more data
+   * to be sent).
+   */
+
+  uvdbg("head=%d tail=%d nwrq=%d empty=%d\n",
+        priv->serdev.xmit.head, priv->serdev.xmit.tail,
+        priv->nwrq, sq_empty(&priv->reqlist));
+
+  /* Get the maximum number of bytes that will fit into one bulk IN request */
+
+#ifdef CONFIG_PL2303_BULKREQLEN
+  reqlen = MAX(CONFIG_PL2303_BULKREQLEN, ep->maxpacket);
+#else
+  reqlen = ep->maxpacket;
+#endif
+
+  while (!sq_empty(&priv->reqlist))
+    {
+      /* Peek at the request in the container at the head of the list */
+
+      reqcontainer = (struct pl2303_req_s *)sq_peek(&priv->reqlist);
+      req          = reqcontainer->req;
+
+      /* Fill the request with serial TX data */
+
+      len = usbclass_fillrequest(priv, req->buf, reqlen);
+      if (len > 0)
+        {
+          /* Remove the empty container from the request list */
+
+          (void)sq_remfirst(&priv->reqlist);
+          priv->nwrq--;
+
+          /* Then submit the request to the endpoint */
+
+          req->len     = len;
+          req->priv    = reqcontainer;
+          req->flags   = USBDEV_REQFLAGS_NULLPKT;
+          ret          = EP_SUBMIT(ep, req);
+          if (ret != OK)
+            {
+              usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_SUBMITFAIL), (uint16_t)-ret);
+              break;
+            }
+        }
+      else
+        {
+          break;
+        }
+    }
+
+  irqrestore(flags);
+  return ret;
+}
+
+/************************************************************************************
+ * Name: usbclass_recvpacket
+ *
+ * Description:
+ *   A normal completion event was received by the read completion handler at the
+ *   interrupt level (with interrupts disabled).  This function handles the USB packet
+ *   and provides the received data to the uart RX buffer.
+ *
+ * Assumptions:
+ *   Called from the USB interrupt handler with interrupts disabled.
+ *
+ ************************************************************************************/
+
+static inline int usbclass_recvpacket(FAR struct pl2303_dev_s *priv,
+                                      uint8_t *reqbuf, uint16_t reqlen)
+{
+  FAR uart_dev_t *serdev = &priv->serdev;
+  FAR struct uart_buffer_s *recv = &serdev->recv;
+  uint16_t currhead;
+  uint16_t nexthead;
+  uint16_t nbytes = 0;
+
+  /* Get the next head index. During the time that RX interrupts are disabled, the
+   * the serial driver will be extracting data from the circular buffer and modifying
+   * recv.tail.  During this time, we should avoid modifying recv.head; Instead we will
+   * use a shadow copy of the index.  When interrupts are restored, the real recv.head
+   * will be updated with this indes.
+   */
+
+  if (priv->rxenabled)
+    {
+      currhead = recv->head;
+    }
+  else
+    {
+      currhead = priv->rxhead;
+    }
+
+  /* Pre-calculate the head index and check for wrap around.  We need to do this
+   * so that we can determine if the circular buffer will overrun BEFORE we
+   * overrun the buffer!
+   */
+
+  nexthead = currhead + 1;
+  if (nexthead >= recv->size)
+    {
+      nexthead = 0;
+    }
+
+  /* Then copy data into the RX buffer until either: (1) all of the data has been
+   * copied, or (2) the RX buffer is full.  NOTE:  If the RX buffer becomes full,
+   * then we have overrun the serial driver and data will be lost.
+   */
+
+  while (nexthead != recv->tail && nbytes < reqlen)
+    {
+      /* Copy one byte to the head of the circular RX buffer */
+
+      recv->buffer[currhead] = *reqbuf++;
+
+      /* Update counts and indices */
+
+      currhead = nexthead;
+      nbytes++;
+
+      /* Increment the head index and check for wrap around */
+
+      nexthead = currhead + 1;
+      if (nexthead >= recv->size)
+        {
+          nexthead = 0;
+        }
+    }
+
+  /* Write back the head pointer using the shadow index if RX "interrupts"
+   * are disabled.
+   */
+
+  if (priv->rxenabled)
+    {
+      recv->head = currhead;
+    }
+  else
+    {
+      priv->rxhead = currhead;
+    }
+
+  /* If data was added to the incoming serial buffer, then wake up any
+   * threads is waiting for incoming data. If we are running in an interrupt
+   * handler, then the serial driver will not run until the interrupt handler
+   * returns.
+   */
+
+  if (priv->rxenabled && nbytes > 0)
+    {
+      uart_datareceived(serdev);
+    }
+
+  /* Return an error if the entire packet could not be transferred */
+
+  if (nbytes < reqlen)
+    {
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_RXOVERRUN), 0);
+      return -ENOSPC;
+    }
+  return OK;
+}
+
+/****************************************************************************
+ * Name: usbclass_allocreq
+ *
+ * Description:
+ *   Allocate a request instance along with its buffer
+ *
+ ****************************************************************************/
+
+static struct usbdev_req_s *usbclass_allocreq(FAR struct usbdev_ep_s *ep,
+                                              uint16_t len)
+{
+  FAR struct usbdev_req_s *req;
+
+  req = EP_ALLOCREQ(ep);
+  if (req != NULL)
+    {
+      req->len = len;
+      req->buf = EP_ALLOCBUFFER(ep, len);
+      if (!req->buf)
+        {
+          EP_FREEREQ(ep, req);
+          req = NULL;
+        }
+    }
+  return req;
+}
+
+/****************************************************************************
+ * Name: usbclass_freereq
+ *
+ * Description:
+ *   Free a request instance along with its buffer
+ *
+ ****************************************************************************/
+
+static void usbclass_freereq(FAR struct usbdev_ep_s *ep,
+                             FAR struct usbdev_req_s *req)
+{
+  if (ep != NULL && req != NULL)
+    {
+      if (req->buf != NULL)
+        {
+          EP_FREEBUFFER(ep, req->buf);
+        }
+      EP_FREEREQ(ep, req);
+    }
+}
+
+/****************************************************************************
+ * Name: usbclass_mkstrdesc
+ *
+ * Description:
+ *   Construct a string descriptor
+ *
+ ****************************************************************************/
+
+static int usbclass_mkstrdesc(uint8_t id, struct usb_strdesc_s *strdesc)
+{
+  const char *str;
+  int len;
+  int ndata;
+  int i;
+
+  switch (id)
+    {
+    case 0:
+      {
+        /* Descriptor 0 is the language id */
+
+        strdesc->len     = 4;
+        strdesc->type    = USB_DESC_TYPE_STRING;
+        strdesc->data[0] = LSBYTE(PL2303_STR_LANGUAGE);
+        strdesc->data[1] = MSBYTE(PL2303_STR_LANGUAGE);
+        return 4;
+      }
+
+    case PL2303_MANUFACTURERSTRID:
+      str = CONFIG_PL2303_VENDORSTR;
+      break;
+
+    case PL2303_PRODUCTSTRID:
+      str = CONFIG_PL2303_PRODUCTSTR;
+      break;
+
+    case PL2303_SERIALSTRID:
+      str = CONFIG_PL2303_SERIALSTR;
+      break;
+
+    case PL2303_CONFIGSTRID:
+      str = CONFIG_PL2303_CONFIGSTR;
+      break;
+
+    default:
+      return -EINVAL;
+    }
+
+   /* The string is utf16-le.  The poor man's utf-8 to utf16-le
+    * conversion below will only handle 7-bit en-us ascii
+    */
+
+   len = strlen(str);
+   for (i = 0, ndata = 0; i < len; i++, ndata += 2)
+     {
+       strdesc->data[ndata]   = str[i];
+       strdesc->data[ndata+1] = 0;
+     }
+
+   strdesc->len  = ndata+2;
+   strdesc->type = USB_DESC_TYPE_STRING;
+   return strdesc->len;
+}
+
+/****************************************************************************
+ * Name: usbclass_mkepbulkdesc
+ *
+ * Description:
+ *   Construct the endpoint descriptor
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_USBDEV_DUALSPEED
+static inline void usbclass_mkepbulkdesc(const FAR struct usb_epdesc_s *indesc,
+                                         uint16_t mxpacket,
+                                         FAR struct usb_epdesc_s *outdesc)
+{
+  /* Copy the canned descriptor */
+
+  memcpy(outdesc, indesc, USB_SIZEOF_EPDESC);
+
+  /* Then add the correct max packet size */
+
+  outdesc->mxpacketsize[0] = LSBYTE(mxpacket);
+  outdesc->mxpacketsize[1] = MSBYTE(mxpacket);
+}
+#endif
+
+/****************************************************************************
+ * Name: usbclass_mkcfgdesc
+ *
+ * Description:
+ *   Construct the configuration descriptor
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_USBDEV_DUALSPEED
+static int16_t usbclass_mkcfgdesc(uint8_t *buf, uint8_t speed, uint8_t type)
+#else
+static int16_t usbclass_mkcfgdesc(uint8_t *buf)
+#endif
+{
+  FAR struct usb_cfgdesc_s *cfgdesc = (struct usb_cfgdesc_s*)buf;
+#ifdef CONFIG_USBDEV_DUALSPEED
+  bool hispeed = (speed == USB_SPEED_HIGH);
+  uint16_t bulkmxpacket;
+#endif
+  uint16_t totallen;
+
+  /* This is the total length of the configuration (not necessarily the
+   * size that we will be sending now.
+   */
+
+  totallen = USB_SIZEOF_CFGDESC + USB_SIZEOF_IFDESC + PL2303_NENDPOINTS * USB_SIZEOF_EPDESC;
+
+  /* Configuration descriptor -- Copy the canned descriptor and fill in the
+   * type (we'll also need to update the size below
+   */
+
+  memcpy(cfgdesc, &g_cfgdesc, USB_SIZEOF_CFGDESC);
+  buf += USB_SIZEOF_CFGDESC;
+
+  /*  Copy the canned interface descriptor */
+
+  memcpy(buf, &g_ifdesc, USB_SIZEOF_IFDESC);
+  buf += USB_SIZEOF_IFDESC;
+
+  /* Make the three endpoint configurations.  First, check for switches
+   * between high and full speed
+   */
+
+#ifdef CONFIG_USBDEV_DUALSPEED
+  if (type == USB_DESC_TYPE_OTHERSPEEDCONFIG)
+    {
+      hispeed = !hispeed;
+    }
+#endif
+
+  memcpy(buf, &g_epintindesc, USB_SIZEOF_EPDESC);
+  buf += USB_SIZEOF_EPDESC;
+
+#ifdef CONFIG_USBDEV_DUALSPEED
+  if (hispeed)
+    {
+      bulkmxpacket = 512;
+    }
+  else
+    {
+      bulkmxpacket = 64;
+    }
+
+  usbclass_mkepbulkdesc(&g_epbulkoutdesc, bulkmxpacket, (struct usb_epdesc_s*)buf);
+  buf += USB_SIZEOF_EPDESC;
+  usbclass_mkepbulkdesc(&g_epbulkindesc, bulkmxpacket, (struct usb_epdesc_s*)buf);
+#else
+  memcpy(buf, &g_epbulkoutdesc, USB_SIZEOF_EPDESC);
+  buf += USB_SIZEOF_EPDESC;
+  memcpy(buf, &g_epbulkindesc, USB_SIZEOF_EPDESC);
+#endif
+
+  /* Finally, fill in the total size of the configuration descriptor */
+
+  cfgdesc->totallen[0] = LSBYTE(totallen);
+  cfgdesc->totallen[1] = MSBYTE(totallen);
+  return totallen;
+}
+
+/****************************************************************************
+ * Name: usbclass_resetconfig
+ *
+ * Description:
+ *   Mark the device as not configured and disable all endpoints.
+ *
+ ****************************************************************************/
+
+static void usbclass_resetconfig(FAR struct pl2303_dev_s *priv)
+{
+  /* Are we configured? */
+
+  if (priv->config != PL2303_CONFIGIDNONE)
+    {
+      /* Yes.. but not anymore */
+
+      priv->config = PL2303_CONFIGIDNONE;
+
+      /* Disable endpoints.  This should force completion of all pending
+       * transfers.
+       */
+
+      EP_DISABLE(priv->epintin);
+      EP_DISABLE(priv->epbulkin);
+      EP_DISABLE(priv->epbulkout);
+    }
+}
+
+/****************************************************************************
+ * Name: usbclass_setconfig
+ *
+ * Description:
+ *   Set the device configuration by allocating and configuring endpoints and
+ *   by allocating and queue read and write requests.
+ *
+ ****************************************************************************/
+
+static int usbclass_setconfig(FAR struct pl2303_dev_s *priv, uint8_t config)
+{
+  FAR struct usbdev_req_s *req;
+#ifdef CONFIG_USBDEV_DUALSPEED
+  struct usb_epdesc_s epdesc;
+  uint16_t bulkmxpacket;
+#endif
+  int i;
+  int ret = 0;
+
+#if CONFIG_DEBUG
+  if (priv == NULL)
+    {
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_INVALIDARG), 0);
+      return -EIO;
+    }
+#endif
+
+  if (config == priv->config)
+    {
+      /* Already configured -- Do nothing */
+
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_ALREADYCONFIGURED), 0);
+      return 0;
+    }
+
+  /* Discard the previous configuration data */
+
+  usbclass_resetconfig(priv);
+
+  /* Was this a request to simply discard the current configuration? */
+
+  if (config == PL2303_CONFIGIDNONE)
+    {
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_CONFIGNONE), 0);
+      return 0;
+    }
+
+  /* We only accept one configuration */
+
+  if (config != PL2303_CONFIGID)
+    {
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_CONFIGIDBAD), 0);
+      return -EINVAL;
+    }
+
+  /* Configure the IN interrupt endpoint */
+
+  ret = EP_CONFIGURE(priv->epintin, &g_epintindesc, false);
+  if (ret < 0)
+    {
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_EPINTINCONFIGFAIL), 0);
+      goto errout;
+    }
+  priv->epintin->priv = priv;
+
+  /* Configure the IN bulk endpoint */
+
+#ifdef CONFIG_USBDEV_DUALSPEED
+  if (priv->usbdev->speed == USB_SPEED_HIGH)
+    {
+      bulkmxpacket = 512;
+    }
+  else
+    {
+      bulkmxpacket = 64;
+    }
+
+  usbclass_mkepbulkdesc(&g_epbulkindesc, bulkmxpacket, &epdesc);
+  ret = EP_CONFIGURE(priv->epbulkin, &epdesc, false);
+#else
+  ret = EP_CONFIGURE(priv->epbulkin, &g_epbulkindesc, false);
+#endif
+  if (ret < 0)
+    {
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_EPBULKINCONFIGFAIL), 0);
+      goto errout;
+    }
+
+  priv->epbulkin->priv = priv;
+
+  /* Configure the OUT bulk endpoint */
+
+#ifdef CONFIG_USBDEV_DUALSPEED
+  usbclass_mkepbulkdesc(&g_epbulkoutdesc, bulkmxpacket, &epdesc);
+  ret = EP_CONFIGURE(priv->epbulkout, &epdesc, true);
+#else
+  ret = EP_CONFIGURE(priv->epbulkout, &g_epbulkoutdesc, true);
+#endif
+  if (ret < 0)
+    {
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_EPBULKOUTCONFIGFAIL), 0);
+      goto errout;
+    }
+
+  priv->epbulkout->priv = priv;
+
+  /* Queue read requests in the bulk OUT endpoint */
+
+  DEBUGASSERT(priv->nrdq == 0);
+  for (i = 0; i < CONFIG_PL2303_NRDREQS; i++)
+    {
+      req           = priv->rdreqs[i].req;
+      req->callback = usbclass_rdcomplete;
+      ret           = EP_SUBMIT(priv->epbulkout, req);
+      if (ret != OK)
+        {
+          usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_RDSUBMIT), (uint16_t)-ret);
+          goto errout;
+        }
+      priv->nrdq++;
+    }
+
+  priv->config = config;
+  return OK;
+
+errout:
+  usbclass_resetconfig(priv);
+  return ret;
+}
+
+/****************************************************************************
+ * Name: usbclass_ep0incomplete
+ *
+ * Description:
+ *   Handle completion of EP0 control operations
+ *
+ ****************************************************************************/
+
+static void usbclass_ep0incomplete(FAR struct usbdev_ep_s *ep,
+                                   FAR struct usbdev_req_s *req)
+{
+  if (req->result || req->xfrd != req->len)
+    {
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_REQRESULT), (uint16_t)-req->result);
+    }
+}
+
+/****************************************************************************
+ * Name: usbclass_rdcomplete
+ *
+ * Description:
+ *   Handle completion of read request on the bulk OUT endpoint.  This
+ *   is handled like the receipt of serial data on the "UART"
+ *
+ ****************************************************************************/
+
+static void usbclass_rdcomplete(FAR struct usbdev_ep_s *ep,
+                                FAR struct usbdev_req_s *req)
+{
+  FAR struct pl2303_dev_s *priv;
+  irqstate_t flags;
+  int ret;
+
+  /* Sanity check */
+
+#ifdef CONFIG_DEBUG
+  if (!ep || !ep->priv || !req)
+    {
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_INVALIDARG), 0);
+      return;
+     }
+#endif
+
+  /* Extract references to private data */
+
+  priv = (FAR struct pl2303_dev_s*)ep->priv;
+
+  /* Process the received data unless this is some unusual condition */
+
+  flags = irqsave();
+  switch (req->result)
+    {
+    case 0: /* Normal completion */
+      usbtrace(TRACE_CLASSRDCOMPLETE, priv->nrdq);
+      usbclass_recvpacket(priv, req->buf, req->xfrd);
+      break;
+
+    case -ESHUTDOWN: /* Disconnection */
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_RDSHUTDOWN), 0);
+      priv->nrdq--;
+      irqrestore(flags);
+      return;
+
+    default: /* Some other error occurred */
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_RDUNEXPECTED), (uint16_t)-req->result);
+      break;
+    };
+
+  /* Requeue the read request */
+
+#ifdef CONFIG_PL2303_BULKREQLEN
+  req->len = max(CONFIG_PL2303_BULKREQLEN, ep->maxpacket);
+#else
+  req->len = ep->maxpacket;
+#endif
+
+  ret      = EP_SUBMIT(ep, req);
+  if (ret != OK)
+    {
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_RDSUBMIT), (uint16_t)-req->result);
+    }
+  irqrestore(flags);
+}
+
+/****************************************************************************
+ * Name: usbclass_wrcomplete
+ *
+ * Description:
+ *   Handle completion of write request.  This function probably executes
+ *   in the context of an interrupt handler.
+ *
+ ****************************************************************************/
+
+static void usbclass_wrcomplete(FAR struct usbdev_ep_s *ep,
+                                FAR struct usbdev_req_s *req)
+{
+  FAR struct pl2303_dev_s *priv;
+  FAR struct pl2303_req_s *reqcontainer;
+  irqstate_t flags;
+
+  /* Sanity check */
+
+#ifdef CONFIG_DEBUG
+  if (!ep || !ep->priv || !req || !req->priv)
+    {
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_INVALIDARG), 0);
+      return;
+     }
+#endif
+
+  /* Extract references to our private data */
+
+  priv         = (FAR struct pl2303_dev_s *)ep->priv;
+  reqcontainer = (FAR struct pl2303_req_s *)req->priv;
+
+  /* Return the write request to the free list */
+
+  flags = irqsave();
+  sq_addlast((sq_entry_t*)reqcontainer, &priv->reqlist);
+  priv->nwrq++;
+  irqrestore(flags);
+
+  /* Send the next packet unless this was some unusual termination
+   * condition
+   */
+
+  switch (req->result)
+    {
+    case OK: /* Normal completion */
+      usbtrace(TRACE_CLASSWRCOMPLETE, priv->nwrq);
+      usbclass_sndpacket(priv);
+      break;
+
+    case -ESHUTDOWN: /* Disconnection */
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_WRSHUTDOWN), priv->nwrq);
+      break;
+
+    default: /* Some other error occurred */
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_WRUNEXPECTED), (uint16_t)-req->result);
+      break;
+    }
+}
+
+/****************************************************************************
+ * USB Class Driver Methods
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: usbclass_bind
+ *
+ * Description:
+ *   Invoked when the driver is bound to a USB device driver
+ *
+ ****************************************************************************/
+
+static int usbclass_bind(FAR struct usbdevclass_driver_s *driver,
+                         FAR struct usbdev_s *dev)
+{
+  FAR struct pl2303_dev_s *priv = ((FAR struct pl2303_driver_s*)driver)->dev;
+  FAR struct pl2303_req_s *reqcontainer;
+  irqstate_t flags;
+  uint16_t reqlen;
+  int ret;
+  int i;
+
+  usbtrace(TRACE_CLASSBIND, 0);
+
+  /* Bind the structures */
+
+  priv->usbdev   = dev;
+
+  /* Save the reference to our private data structure in EP0 so that it
+   * can be recovered in ep0 completion events (Unless we are part of 
+   * a composite device and, in that case, the composite device owns
+   * EP0).
+   */
+
+  dev->ep0->priv = priv;
+
+  /* Preallocate control request */
+
+  priv->ctrlreq = usbclass_allocreq(dev->ep0, PL2303_MXDESCLEN);
+  if (priv->ctrlreq == NULL)
+    {
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_ALLOCCTRLREQ), 0);
+      ret = -ENOMEM;
+      goto errout;
+    }
+  priv->ctrlreq->callback = usbclass_ep0incomplete;
+
+  /* Pre-allocate all endpoints... the endpoints will not be functional
+   * until the SET CONFIGURATION request is processed in usbclass_setconfig.
+   * This is done here because there may be calls to kmalloc and the SET
+   * CONFIGURATION processing probably occurrs within interrupt handling
+   * logic where kmalloc calls will fail.
+   */
+
+  /* Pre-allocate the IN interrupt endpoint */
+
+  priv->epintin = DEV_ALLOCEP(dev, PL2303_EPINTIN_ADDR, true, USB_EP_ATTR_XFER_INT);
+  if (!priv->epintin)
+    {
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_EPINTINALLOCFAIL), 0);
+      ret = -ENODEV;
+      goto errout;
+    }
+  priv->epintin->priv = priv;
+
+  /* Pre-allocate the IN bulk endpoint */
+
+  priv->epbulkin = DEV_ALLOCEP(dev, PL2303_EPINBULK_ADDR, true, USB_EP_ATTR_XFER_BULK);
+  if (!priv->epbulkin)
+    {
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_EPBULKINALLOCFAIL), 0);
+      ret = -ENODEV;
+      goto errout;
+    }
+  priv->epbulkin->priv = priv;
+
+  /* Pre-allocate the OUT bulk endpoint */
+
+  priv->epbulkout = DEV_ALLOCEP(dev, PL2303_EPOUTBULK_ADDR, false, USB_EP_ATTR_XFER_BULK);
+  if (!priv->epbulkout)
+    {
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_EPBULKOUTALLOCFAIL), 0);
+      ret = -ENODEV;
+      goto errout;
+    }
+  priv->epbulkout->priv = priv;
+
+  /* Pre-allocate read requests */
+
+#ifdef CONFIG_PL2303_BULKREQLEN
+  reqlen = max(CONFIG_PL2303_BULKREQLEN, priv->epbulkout->maxpacket);
+#else
+  reqlen = priv->epbulkout->maxpacket;
+#endif
+
+  for (i = 0; i < CONFIG_PL2303_NRDREQS; i++)
+    {
+      reqcontainer      = &priv->rdreqs[i];
+      reqcontainer->req = usbclass_allocreq(priv->epbulkout, reqlen);
+      if (reqcontainer->req == NULL)
+        {
+          usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_RDALLOCREQ), -ENOMEM);
+          ret = -ENOMEM;
+          goto errout;
+        }
+      reqcontainer->req->priv     = reqcontainer;
+      reqcontainer->req->callback = usbclass_rdcomplete;
+    }
+
+  /* Pre-allocate write request containers and put in a free list */
+
+#ifdef CONFIG_PL2303_BULKREQLEN
+  reqlen = max(CONFIG_PL2303_BULKREQLEN, priv->epbulkin->maxpacket);
+#else
+  reqlen = priv->epbulkin->maxpacket;
+#endif
+
+  for (i = 0; i < CONFIG_PL2303_NWRREQS; i++)
+    {
+      reqcontainer      = &priv->wrreqs[i];
+      reqcontainer->req = usbclass_allocreq(priv->epbulkin, reqlen);
+      if (reqcontainer->req == NULL)
+        {
+          usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_WRALLOCREQ), -ENOMEM);
+          ret = -ENOMEM;
+          goto errout;
+        }
+      reqcontainer->req->priv     = reqcontainer;
+      reqcontainer->req->callback = usbclass_wrcomplete;
+
+      flags = irqsave();
+      sq_addlast((sq_entry_t*)reqcontainer, &priv->reqlist);
+      priv->nwrq++;     /* Count of write requests available */
+      irqrestore(flags);
+    }
+
+  /* Report if we are selfpowered */
+
+#ifdef CONFIG_USBDEV_SELFPOWERED
+  DEV_SETSELFPOWERED(dev);
+#endif
+
+  /* And pull-up the data line for the soft connect function */
+
+  DEV_CONNECT(dev);
+  return OK;
+
+errout:
+  usbclass_unbind(driver, dev);
+  return ret;
+}
+
+/****************************************************************************
+ * Name: usbclass_unbind
+ *
+ * Description:
+ *    Invoked when the driver is unbound from a USB device driver
+ *
+ ****************************************************************************/
+
+static void usbclass_unbind(FAR struct usbdevclass_driver_s *driver,
+                            FAR struct usbdev_s *dev)
+{
+  FAR struct pl2303_dev_s *priv;
+  FAR struct pl2303_req_s *reqcontainer;
+  irqstate_t flags;
+  int i;
+
+  usbtrace(TRACE_CLASSUNBIND, 0);
+
+#ifdef CONFIG_DEBUG
+  if (!driver || !dev || !dev->ep0)
+    {
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_INVALIDARG), 0);
+      return;
+     }
+#endif
+
+  /* Extract reference to private data */
+
+  priv = ((FAR struct pl2303_driver_s*)driver)->dev;
+
+#ifdef CONFIG_DEBUG
+  if (!priv)
+    {
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_EP0NOTBOUND), 0);
+      return;
+    }
+#endif
+
+  /* Make sure that we are not already unbound */
+
+  if (priv != NULL)
+    {
+      /* Make sure that the endpoints have been unconfigured.  If
+       * we were terminated gracefully, then the configuration should
+       * already have been reset.  If not, then calling usbclass_resetconfig
+       * should cause the endpoints to immediately terminate all
+       * transfers and return the requests to us (with result == -ESHUTDOWN)
+       */
+
+      usbclass_resetconfig(priv);
+      up_mdelay(50);
+
+      /* Free the interrupt IN endpoint */
+
+      if (priv->epintin)
+        {
+          DEV_FREEEP(dev, priv->epintin);
+          priv->epintin = NULL;
+        }
+
+      /* Free the bulk IN endpoint */
+
+      if (priv->epbulkin)
+        {
+          DEV_FREEEP(dev, priv->epbulkin);
+          priv->epbulkin = NULL;
+        }
+
+      /* Free the pre-allocated control request */
+
+      if (priv->ctrlreq != NULL)
+        {
+          usbclass_freereq(dev->ep0, priv->ctrlreq);
+          priv->ctrlreq = NULL;
+        }
+
+      /* Free pre-allocated read requests (which should all have
+       * been returned to the free list at this time -- we don't check)
+       */
+
+      DEBUGASSERT(priv->nrdq == 0);
+      for (i = 0; i < CONFIG_PL2303_NRDREQS; i++)
+        {
+          reqcontainer = &priv->rdreqs[i];
+          if (reqcontainer->req)
+            {
+              usbclass_freereq(priv->epbulkout, reqcontainer->req);
+              reqcontainer->req = NULL;
+            }
+        }
+
+      /* Free the bulk OUT endpoint */
+
+      if (priv->epbulkout)
+        {
+          DEV_FREEEP(dev, priv->epbulkout);
+          priv->epbulkout = NULL;
+        }
+
+      /* Free write requests that are not in use (which should be all
+       * of them
+       */
+
+      flags = irqsave();
+      DEBUGASSERT(priv->nwrq == CONFIG_PL2303_NWRREQS);
+      while (!sq_empty(&priv->reqlist))
+        {
+          reqcontainer = (struct pl2303_req_s *)sq_remfirst(&priv->reqlist);
+          if (reqcontainer->req != NULL)
+            {
+              usbclass_freereq(priv->epbulkin, reqcontainer->req);
+              priv->nwrq--;     /* Number of write requests queued */
+            }
+        }
+      DEBUGASSERT(priv->nwrq == 0);
+      irqrestore(flags);
+    }
+
+  /* Clear out all data in the circular buffer */
+
+  priv->serdev.xmit.head = 0;
+  priv->serdev.xmit.tail = 0;
+}
+
+/****************************************************************************
+ * Name: usbclass_setup
+ *
+ * Description:
+ *   Invoked for ep0 control requests.  This function probably executes
+ *   in the context of an interrupt handler.
+ *
+ ****************************************************************************/
+
+static int usbclass_setup(FAR struct usbdevclass_driver_s *driver,
+                          FAR struct usbdev_s *dev,
+                          FAR const struct usb_ctrlreq_s *ctrl,
+                          FAR uint8_t *dataout, size_t outlen)
+{
+  FAR struct pl2303_dev_s *priv;
+  FAR struct usbdev_req_s *ctrlreq;
+  uint16_t value;
+  uint16_t index;
+  uint16_t len;
+  int ret = -EOPNOTSUPP;
+
+#ifdef CONFIG_DEBUG
+  if (!driver || !dev || !dev->ep0 || !ctrl)
+    {
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_INVALIDARG), 0);
+      return -EIO;
+     }
+#endif
+
+  /* Extract reference to private data */
+
+  usbtrace(TRACE_CLASSSETUP, ctrl->req);
+  priv = ((FAR struct pl2303_driver_s*)driver)->dev;
+
+#ifdef CONFIG_DEBUG
+  if (!priv || !priv->ctrlreq)
+    {
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_EP0NOTBOUND), 0);
+      return -ENODEV;
+    }
+#endif
+  ctrlreq = priv->ctrlreq;
+
+  /* Extract the little-endian 16-bit values to host order */
+
+  value = GETUINT16(ctrl->value);
+  index = GETUINT16(ctrl->index);
+  len   = GETUINT16(ctrl->len);
+
+  uvdbg("type=%02x req=%02x value=%04x index=%04x len=%04x\n",
+        ctrl->type, ctrl->req, value, index, len);
+
+  switch (ctrl->type & USB_REQ_TYPE_MASK)
+    {
+     /***********************************************************************
+      * Standard Requests
+      ***********************************************************************/
+
+    case USB_REQ_TYPE_STANDARD:
+      {
+        switch (ctrl->req)
+          {
+          case USB_REQ_GETDESCRIPTOR:
+            {
+              /* The value field specifies the descriptor type in the MS byte and the
+               * descriptor index in the LS byte (order is little endian)
+               */
+
+              switch (ctrl->value[1])
+                {
+                case USB_DESC_TYPE_DEVICE:
+                  {
+                    ret = USB_SIZEOF_DEVDESC;
+                    memcpy(ctrlreq->buf, &g_devdesc, ret);
+                  }
+                  break;
+
+#ifdef CONFIG_USBDEV_DUALSPEED
+                case USB_DESC_TYPE_DEVICEQUALIFIER:
+                  {
+                    ret = USB_SIZEOF_QUALDESC;
+                    memcpy(ctrlreq->buf, &g_qualdesc, ret);
+                  }
+                  break;
+
+                case USB_DESC_TYPE_OTHERSPEEDCONFIG:
+#endif /* CONFIG_USBDEV_DUALSPEED */
+
+                case USB_DESC_TYPE_CONFIG:
+                  {
+#ifdef CONFIG_USBDEV_DUALSPEED
+                    ret = usbclass_mkcfgdesc(ctrlreq->buf, dev->speed, ctrl->req);
+#else
+                    ret = usbclass_mkcfgdesc(ctrlreq->buf);
+#endif
+                  }
+                  break;
+
+                case USB_DESC_TYPE_STRING:
+                  {
+                    /* index == language code. */
+
+                    ret = usbclass_mkstrdesc(ctrl->value[0], (struct usb_strdesc_s *)ctrlreq->buf);
+                  }
+                  break;
+
+                default:
+                  {
+                    usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_GETUNKNOWNDESC), value);
+                  }
+                  break;
+                }
+            }
+            break;
+
+          case USB_REQ_SETCONFIGURATION:
+            {
+              if (ctrl->type == 0)
+                {
+                  ret = usbclass_setconfig(priv, value);
+                }
+            }
+            break;
+
+          case USB_REQ_GETCONFIGURATION:
+            {
+              if (ctrl->type == USB_DIR_IN)
+                {
+                  *(uint8_t*)ctrlreq->buf = priv->config;
+                  ret = 1;
+                }
+            }
+            break;
+
+          case USB_REQ_SETINTERFACE:
+            {
+              if (ctrl->type == USB_REQ_RECIPIENT_INTERFACE)
+                {
+                  if (priv->config == PL2303_CONFIGID &&
+                      index == PL2303_INTERFACEID &&
+                      value == PL2303_ALTINTERFACEID)
+                    {
+                      usbclass_resetconfig(priv);
+                      usbclass_setconfig(priv, priv->config);
+                      ret = 0;
+                    }
+                }
+            }
+            break;
+
+          case USB_REQ_GETINTERFACE:
+            {
+              if (ctrl->type == (USB_DIR_IN|USB_REQ_RECIPIENT_INTERFACE) &&
+                  priv->config == PL2303_CONFIGIDNONE)
+                {
+                  if (index != PL2303_INTERFACEID)
+                    {
+                      ret = -EDOM;
+                    }
+                  else
+                     {
+                      *(uint8_t*) ctrlreq->buf = PL2303_ALTINTERFACEID;
+                      ret = 1;
+                    }
+                }
+             }
+             break;
+
+          default:
+            usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_UNSUPPORTEDSTDREQ), ctrl->req);
+            break;
+          }
+      }
+      break;
+
+     /***********************************************************************
+      * PL2303 Vendor-Specific Requests
+      ***********************************************************************/
+
+    case PL2303_CONTROL_TYPE:
+      {
+        if ((ctrl->type & USB_REQ_RECIPIENT_MASK) == USB_REQ_RECIPIENT_INTERFACE)
+          {
+            switch (ctrl->req)
+              {
+              case PL2303_SETLINEREQUEST:
+                {
+                   memcpy(priv->linest, ctrlreq->buf, min(len, 7));
+                   ret = 0;
+                }
+                break;
+
+
+              case PL2303_GETLINEREQUEST:
+                {
+                   memcpy(ctrlreq->buf, priv->linest, 7);
+                   ret = 7;
+                }
+                break;
+
+              case PL2303_SETCONTROLREQUEST:
+              case PL2303_BREAKREQUEST:
+                {
+                  ret = 0;
+                }
+                break;
+
+              default:
+                usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_UNSUPPORTEDCLASSREQ), ctrl->type);
+                break;
+              }
+          }
+      }
+      break;
+
+    case PL2303_RWREQUEST_TYPE:
+      {
+        if ((ctrl->type & USB_REQ_RECIPIENT_MASK) == USB_REQ_RECIPIENT_DEVICE)
+          {
+            if (ctrl->req == PL2303_RWREQUEST)
+              {
+                if ((ctrl->type & USB_DIR_IN) != 0)
+                  {
+                    *(uint32_t*)ctrlreq->buf = 0xdeadbeef;
+                    ret = 4;
+                  }
+                else
+                  {
+                     ret = 0;
+                  }
+              }
+            else
+              {
+                usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_UNSUPPORTEDCLASSREQ), ctrl->type);
+              }
+          }
+      }
+      break;
+
+    default:
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_UNSUPPORTEDTYPE), ctrl->type);
+      break;
+    }
+
+  /* Respond to the setup command if data was returned.  On an error return
+   * value (ret < 0), the USB driver will stall.
+   */
+
+  if (ret >= 0)
+    {
+      ctrlreq->len   = min(len, ret);
+      ctrlreq->flags = USBDEV_REQFLAGS_NULLPKT;
+      ret            = EP_SUBMIT(dev->ep0, ctrlreq);
+      if (ret < 0)
+        {
+          usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_EPRESPQ), (uint16_t)-ret);
+          ctrlreq->result = OK;
+          usbclass_ep0incomplete(dev->ep0, ctrlreq);
+        }
+    }
+
+  return ret;
+}
+
+/****************************************************************************
+ * Name: usbclass_disconnect
+ *
+ * Description:
+ *   Invoked after all transfers have been stopped, when the host is
+ *   disconnected.  This function is probably called from the context of an
+ *   interrupt handler.
+ *
+ ****************************************************************************/
+
+static void usbclass_disconnect(FAR struct usbdevclass_driver_s *driver,
+                                FAR struct usbdev_s *dev)
+{
+  FAR struct pl2303_dev_s *priv;
+  irqstate_t flags;
+
+  usbtrace(TRACE_CLASSDISCONNECT, 0);
+
+#ifdef CONFIG_DEBUG
+  if (!driver || !dev || !dev->ep0)
+    {
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_INVALIDARG), 0);
+      return;
+     }
+#endif
+
+  /* Extract reference to private data */
+
+  priv = ((FAR struct pl2303_driver_s*)driver)->dev;
+
+#ifdef CONFIG_DEBUG
+  if (!priv)
+    {
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_EP0NOTBOUND), 0);
+      return;
+    }
+#endif
+
+  /* Reset the configuration */
+
+  flags = irqsave();
+  usbclass_resetconfig(priv);
+
+  /* Clear out all data in the circular buffer */
+
+  priv->serdev.xmit.head = 0;
+  priv->serdev.xmit.tail = 0;
+  irqrestore(flags);
+
+  /* Perform the soft connect function so that we will we can be
+   * re-enumerated.
+   */
+
+  DEV_CONNECT(dev); 
+}
+
+/****************************************************************************
+ * Serial Device Methods
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: usbser_setup
+ *
+ * Description:
+ *   This method is called the first time that the serial port is opened.
+ *
+ ****************************************************************************/
+
+static int usbser_setup(FAR struct uart_dev_s *dev)
+{
+  FAR struct pl2303_dev_s *priv;
+
+  usbtrace(PL2303_CLASSASPI_SETUP, 0);
+
+  /* Sanity check */
+
+#if CONFIG_DEBUG
+  if (!dev || !dev->priv)
+    {
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_INVALIDARG), 0);
+      return -EIO;
+    }
+#endif
+
+  /* Extract reference to private data */
+
+  priv = (FAR struct pl2303_dev_s*)dev->priv;
+
+  /* Check if we have been configured */
+
+  if (priv->config == PL2303_CONFIGIDNONE)
+    {
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_SETUPNOTCONNECTED), 0);
+      return -ENOTCONN;
+    }
+
+  return OK;
+}
+
+/****************************************************************************
+ * Name: usbser_shutdown
+ *
+ * Description:
+ *   This method is called when the serial port is closed.  This operation
+ *   is very simple for the USB serial backend because the serial driver
+ *   has already assured that the TX data has full drained -- it calls
+ *   usbser_txempty() until that function returns true before calling this
+ *   function.
+ *
+ ****************************************************************************/
+
+static void usbser_shutdown(FAR struct uart_dev_s *dev)
+{
+  usbtrace(PL2303_CLASSASPI_SHUTDOWN, 0);
+
+  /* Sanity check */
+
+#if CONFIG_DEBUG
+  if (!dev || !dev->priv)
+    {
+       usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_INVALIDARG), 0);
+    }
+#endif
+}
+
+/****************************************************************************
+ * Name: usbser_attach
+ *
+ * Description:
+ *   Does not apply to the USB serial class device
+ *
+ ****************************************************************************/
+
+static int usbser_attach(FAR struct uart_dev_s *dev)
+{
+  usbtrace(PL2303_CLASSASPI_ATTACH, 0);
+  return OK;
+}
+
+/****************************************************************************
+ * Name: usbser_detach
+ *
+ * Description:
+*   Does not apply to the USB serial class device
+  *
+ ****************************************************************************/
+
+static void usbser_detach(FAR struct uart_dev_s *dev)
+{
+  usbtrace(PL2303_CLASSASPI_DETACH, 0);
+}
+
+/****************************************************************************
+ * Name: usbser_rxint
+ *
+ * Description:
+ *   Called by the serial driver to enable or disable RX interrupts.  We, of
+ *   course, have no RX interrupts but must behave consistently.  This method
+ *   is called under the conditions:
+ *
+ *   1. With enable==true when the port is opened (just after usbser_setup
+ *      and usbser_attach are called called)
+ *   2. With enable==false while transferring data from the RX buffer
+ *   2. With enable==true while waiting for more incoming data
+ *   3. With enable==false when the port is closed (just before usbser_detach
+ *      and usbser_shutdown are called).
+ *
+ ****************************************************************************/
+
+static void usbser_rxint(FAR struct uart_dev_s *dev, bool enable)
+{
+  FAR struct pl2303_dev_s *priv;
+  FAR uart_dev_t *serdev;
+  irqstate_t flags;
+
+  usbtrace(PL2303_CLASSASPI_RXINT, (uint16_t)enable);
+
+  /* Sanity check */
+
+#if CONFIG_DEBUG
+  if (!dev || !dev->priv)
+    {
+       usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_INVALIDARG), 0);
+       return;
+    }
+#endif
+
+  /* Extract reference to private data */
+
+  priv   = (FAR struct pl2303_dev_s*)dev->priv;
+  serdev = &priv->serdev;
+
+  /* We need exclusive access to the RX buffer and private structure
+   * in the following.
+   */
+
+  flags = irqsave();
+  if (enable)
+    {
+       /* RX "interrupts" are enabled.  Is this a transition from disabled
+        * to enabled state?
+        */
+
+       if (!priv->rxenabled)
+         {
+           /* Yes.  During the time that RX interrupts are disabled, the
+            * the serial driver will be extracting data from the circular
+            * buffer and modifying recv.tail.  During this time, we
+            * should avoid modifying recv.head; When interrupts are restored,
+            * we can update the head pointer for all of the data that we
+            * put into cicular buffer while "interrupts" were disabled.
+            */
+
+          if (priv->rxhead != serdev->recv.head)
+            {
+              serdev->recv.head = priv->rxhead;
+
+              /* Yes... signal the availability of new data */
+
+              uart_datareceived(serdev);
+            }
+
+          /* RX "interrupts are no longer disabled */
+
+          priv->rxenabled = true;
+        }
+    }
+
+  /* RX "interrupts" are disabled.  Is this a transition from enabled
+   * to disabled state?
+   */
+
+  else if (priv->rxenabled)
+    {
+      /* Yes.  During the time that RX interrupts are disabled, the
+       * the serial driver will be extracting data from the circular
+       * buffer and modifying recv.tail.  During this time, we
+       * should avoid modifying recv.head; When interrupts are disabled,
+       * we use a shadow index and continue adding data to the circular
+       * buffer.
+       */
+
+      priv->rxhead    = serdev->recv.head;
+      priv->rxenabled = false;
+    }
+  irqrestore(flags);
+}
+
+/****************************************************************************
+ * Name: usbser_txint
+ *
+ * Description:
+ *   Called by the serial driver to enable or disable TX interrupts.  We, of
+ *   course, have no TX interrupts but must behave consistently.  Initially,
+ *   TX interrupts are disabled.  This method is called under the conditions:
+ *
+ *   1. With enable==false while transferring data into the TX buffer
+ *   2. With enable==true when data may be taken from the buffer.
+ *   3. With enable==false when the TX buffer is empty
+ *
+ ****************************************************************************/
+
+static void usbser_txint(FAR struct uart_dev_s *dev, bool enable)
+{
+  FAR struct pl2303_dev_s *priv;
+
+  usbtrace(PL2303_CLASSASPI_TXINT, (uint16_t)enable);
+
+  /* Sanity checks */
+
+#if CONFIG_DEBUG
+  if (!dev || !dev->priv)
+    {
+       usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_INVALIDARG), 0);
+       return;
+    }
+#endif
+
+ /* Extract references to private data */
+
+  priv = (FAR struct pl2303_dev_s*)dev->priv;
+
+  /* If the new state is enabled and if there is data in the XMIT buffer,
+   * send the next packet now.
+   */
+
+  uvdbg("enable=%d head=%d tail=%d\n",
+        enable, priv->serdev.xmit.head, priv->serdev.xmit.tail);
+
+  if (enable && priv->serdev.xmit.head != priv->serdev.xmit.tail)
+    {
+      usbclass_sndpacket(priv);
+    }
+}
+
+/****************************************************************************
+ * Name: usbser_txempty
+ *
+ * Description:
+ *   Return true when all data has been sent.  This is called from the
+ *   serial driver when the driver is closed.  It will call this API
+ *   periodically until it reports true.  NOTE that the serial driver takes all
+ *   responsibility for flushing TX data through the hardware so we can be
+ *   a bit sloppy about that.
+ *
+ ****************************************************************************/
+
+static bool usbser_txempty(FAR struct uart_dev_s *dev)
+{
+  FAR struct pl2303_dev_s *priv = (FAR struct pl2303_dev_s*)dev->priv;
+
+  usbtrace(PL2303_CLASSASPI_TXEMPTY, 0);
+
+#if CONFIG_DEBUG
+  if (!priv)
+    {
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_INVALIDARG), 0);
+      return true;
+    }
+#endif
+
+  /* When all of the allocated write requests have been returned to the
+   * reqlist, then there is no longer any TX data in flight.
+   */
+
+  return priv->nwrq >= CONFIG_PL2303_NWRREQS;
+}
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: usbdev_serialinitialize
+ *
+ * Description:
+ *   Register USB serial port (and USB serial console if so configured).
+ *
+ ****************************************************************************/
+
+int usbdev_serialinitialize(int minor)
+{
+  FAR struct pl2303_alloc_s *alloc;
+  FAR struct pl2303_dev_s *priv;
+  FAR struct pl2303_driver_s *drvr;
+  char devname[16];
+  int ret;
+
+  /* Allocate the structures needed */
+
+  alloc = (FAR struct pl2303_alloc_s*)kmalloc(sizeof(struct pl2303_alloc_s));
+  if (!alloc)
+    {
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_ALLOCDEVSTRUCT), 0);
+      return -ENOMEM;
+    }
+
+  /* Convenience pointers into the allocated blob */
+
+  priv = &alloc->dev;
+  drvr = &alloc->drvr;
+
+  /* Initialize the USB serial driver structure */
+
+  memset(priv, 0, sizeof(struct pl2303_dev_s));
+  sq_init(&priv->reqlist);
+
+  /* Fake line status */
+
+  priv->linest[0] = (115200) & 0xff;       /* Baud=115200 */
+  priv->linest[1] = (115200 >> 8) & 0xff;
+  priv->linest[2] = (115200 >> 16) & 0xff;
+  priv->linest[3] = (115200 >> 24) & 0xff;
+  priv->linest[4] = 0;                     /* One stop bit */
+  priv->linest[5] = 0;                     /* No parity */
+  priv->linest[6] = 8;                     /*8 data bits */
+
+  /* Initialize the serial driver sub-structure */
+
+  priv->serdev.recv.size   = CONFIG_PL2303_RXBUFSIZE;
+  priv->serdev.recv.buffer = priv->rxbuffer;
+  priv->serdev.xmit.size   = CONFIG_PL2303_TXBUFSIZE;
+  priv->serdev.xmit.buffer = priv->txbuffer;
+  priv->serdev.ops         = &g_uartops;
+  priv->serdev.priv        = priv;
+
+  /* Initialize the USB class driver structure */
+
+#ifdef CONFIG_USBDEV_DUALSPEED
+  drvr->drvr.speed         = USB_SPEED_HIGH;
+#else
+  drvr->drvr.speed         = USB_SPEED_FULL;
+#endif
+  drvr->drvr.ops           = &g_driverops;
+  drvr->dev                = priv;
+
+  /* Register the USB serial class driver */
+
+  ret = usbdev_register(&drvr->drvr);
+  if (ret)
+    {
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_DEVREGISTER), (uint16_t)-ret);
+      goto errout_with_alloc;
+    }
+
+  /* Register the USB serial console */
+
+#ifdef CONFIG_PL2303_CONSOLE
+  priv->serdev.isconsole = true;
+  ret = uart_register("/dev/console", &priv->serdev);
+  if (ret < 0)
+    {
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_CONSOLEREGISTER), (uint16_t)-ret);
+      goto errout_with_class;
+    }
+#endif
+
+  /* Register the single port supported by this implementation */
+
+  sprintf(devname, "/dev/ttyUSB%d", minor);
+  ret = uart_register(devname, &priv->serdev);
+  if (ret)
+    {
+      usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_UARTREGISTER), (uint16_t)-ret);
+      goto errout_with_class;
+    }
+  return OK;
+
+errout_with_class:
+  usbdev_unregister(&drvr->drvr);
+errout_with_alloc:
+  kfree(alloc);
+  return ret;
+}