diff options
| author | patacongo <patacongo@7fd9a85b-ad96-42d3-883c-3090e2eb8679> | 2012-09-13 18:32:24 +0000 |
|---|---|---|
| committer | patacongo <patacongo@7fd9a85b-ad96-42d3-883c-3090e2eb8679> | 2012-09-13 18:32:24 +0000 |
| commit | 84cfa6fceb0d0779e381982f04d253f8f105ebdc (patch) | |
| tree | 1628300d9dbfac947ef9a9a8ec6013337cba17bb /nuttx/drivers | |
| parent | 2cb5c82c18a3954cd39ce37e513718074cace461 (diff) | |
| download | px4-firmware-84cfa6fceb0d0779e381982f04d253f8f105ebdc.tar.gz px4-firmware-84cfa6fceb0d0779e381982f04d253f8f105ebdc.tar.bz2 px4-firmware-84cfa6fceb0d0779e381982f04d253f8f105ebdc.zip | |
Email address change in nuttx/
git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@5145 7fd9a85b-ad96-42d3-883c-3090e2eb8679
Diffstat (limited to 'nuttx/drivers')
34 files changed, 1196 insertions, 1196 deletions
diff --git a/nuttx/drivers/analog/Make.defs b/nuttx/drivers/analog/Make.defs index 10b0db478..d94e39758 100644 --- a/nuttx/drivers/analog/Make.defs +++ b/nuttx/drivers/analog/Make.defs @@ -2,7 +2,7 @@ # drivers/analog/Make.defs # # Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <spudmonkey@racsa.co.cr> +# Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions diff --git a/nuttx/drivers/analog/dac.c b/nuttx/drivers/analog/dac.c index 9371e3414..e1fc3049f 100644 --- a/nuttx/drivers/analog/dac.c +++ b/nuttx/drivers/analog/dac.c @@ -8,7 +8,7 @@ * Derived from drivers/can.c * * Copyright (C) 2008-2009Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions diff --git a/nuttx/drivers/input/Make.defs b/nuttx/drivers/input/Make.defs index aaf08b827..6dbae268e 100644 --- a/nuttx/drivers/input/Make.defs +++ b/nuttx/drivers/input/Make.defs @@ -2,7 +2,7 @@ # drivers/input/Make.defs # # Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <spudmonkey@racsa.co.cr> +# Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions diff --git a/nuttx/drivers/lcd/nokia6100.c b/nuttx/drivers/lcd/nokia6100.c index d450e05db..7354b8a91 100644 --- a/nuttx/drivers/lcd/nokia6100.c +++ b/nuttx/drivers/lcd/nokia6100.c @@ -3,7 +3,7 @@ * Nokia 6100 LCD Display Driver * * Copyright (C) 2010-2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * Author: Gregory Nutt <gnutt@nuttx.org> * * References: * "Nokia 6100 LCD Display Driver," Revision 1, James P. Lynch ("Nokia 6100 LCD diff --git a/nuttx/drivers/lcd/pcf8833.h b/nuttx/drivers/lcd/pcf8833.h index b0a7e14d4..36dc65ac3 100644 --- a/nuttx/drivers/lcd/pcf8833.h +++ b/nuttx/drivers/lcd/pcf8833.h @@ -1,152 +1,152 @@ -/**************************************************************************************
- * drivers/lcd/pcf8833.h
- * Definitions for the Phillips PCF8833 LCD controller
- *
- * Copyright (C) 2010 Gregory Nutt. All rights reserved.
- * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
- *
- * References: "Data Sheet, PCF8833 STN RGB 132x132x3 driver," Phillips, 2003 Feb 14.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- * used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- **************************************************************************************/
-
-#ifndef __DRIVERS_LCD_PCF8833_H
-#define __DRIVERS_LCD_PCF8833_H
-
-/**************************************************************************************
- * Included Files
- **************************************************************************************/
-
-/**************************************************************************************
- * Pre-processor Definitions
- **************************************************************************************/
-/* Pixel format codes */
-
-#define PCF8833_FMT_8BPS (2)
-#define PCF8833_FMT_12BPS (3)
-#define PCF8833_FMT_16BPS (5)
-
-/* LCD Commands */
-
-#define PCF8833_NOP 0x00 /* No operation; Data: none */
-#define PCF8833_SWRESET 0x01 /* Software reset ; Data: none */
-#define PCF8833_BSTROFF 0x02 /* Booster voltage off; Data: none */
-#define PCF8833_BSTRON 0x03 /* Booster voltage on; Data: none */
-#define PCF8833_RDDIDIF 0x04 /* Read display identification; Data: none */
-#define PCF8833_RDDST 0x09 /* Read display status; Data: none */
-#define PCF8833_SLEEPIN 0x10 /* Sleep_IN; Data: none */
-#define PCF8833_SLEEPOUT 0x11 /* Sleep_OUT; Data: none */
-#define PCF8833_PTLON 0x12 /* Partial mode on; Data: none */
-#define PCF8833_NORON 0x13 /* Normal Display mode on; Data: none */
-#define PCF8833_INVOFF 0x20 /* Display inversion off; Data: none */
-#define PCF8833_INVON 0x21 /* Display inversion on; Data: none */
-#define PCF8833_DALO 0x22 /* All pixel off; Data: none */
-#define PCF8833_DAL 0x23 /* All pixel on; Data: none */
-#define PCF8833_SETCON 0x25 /* Set contrast; Data: (1) contrast */
-#define PCF8833_DISPOFF 0x28 /* Display off; Data: none */
-#define PCF8833_DISPON 0x29 /* Display on; Data: none */
-#define PCF8833_CASET 0x2a /* Column address set; Data: (1) X start (2) X end */
-#define PCF8833_PASET 0x2b /* Page address set Data: (1) Y start (2) Y end */
-#define PCF8833_RAMWR 0x2c /* Memory write; Data: (1) write data */
-#define PCF8833_RGBSET 0x2d /* Colour set; Data: (1-8) red tones, (9-16) green tones, (17-20) blue tones */
-#define PCF8833_PTLAR 0x30 /* Partial area; Data: (1) start address (2) end address */
-#define PCF8833_VSCRDEF 0x33 /* Vertical scroll definition; Data: (1) top fixed, (2) scrol area, (3) bottom fixed */
-#define PCF8833_TEOFF 0x34 /* Tearing line off; Data: none */
-#define PCF8833_TEON 0x35 /* Tearing line on; Data: (1) don't care */
-#define PCF8833_MADCTL 0x36 /* Memory data access control; Data: (1) access control settings */
-#define PCF8833_SEP 0x37 /* Set Scroll Entry Point; Data: (1) scroll entry point */
-#define PCF8833_IDMOFF 0x38 /* Idle mode off; Data: none */
-#define PCF8833_IDMON 0x39 /* Idle mode on; Data: none */
-#define PCF8833_COLMOD 0x3a /* Interface pixel format; Data: (1) color interface format */
-#define PCF8833_SETVOP 0xb0 /* Set VOP; Data: (1) VOP5-8 (2) VOP0-4 */
-#define PCF8833_BRS 0xb4 /* Bottom Row Swap; Data: none */
-#define PCF8833_TRS 0xb6 /* Top Row Swap; Data: none */
-#define PCF8833_FINV 0xb9 /* Super Frame INVersion; Data: none */
-#define PCF8833_DOR 0xba /* Data ORder; Data: none */
-#define PCF8833_TCDFE 0xbd /* Enable/disable DF temp comp; Data: none */
-#define PCF8833_TCVOPE 0xbf /* Enable or disable VOP temp comp; Data: none */
-#define PCF8833_EC 0xc0 /* Internal or external oscillator; Data: none */
-#define PCF8833_SETMUL 0xc2 /* Set multiplication factor; Data: (1) Multiplication factor */
-#define PCF8833_TCVOPAB 0xc3 /* Set TCVOP slopes A and B; Data: (1) SLB and SLA */
-#define PCF8833_TCVOPCD 0xc4 /* Set TCVOP slopes C and D; Data: (1) SLD and SLC */
-#define PCF8833_TCDF 0xc5 /* Set divider frequency; Data: Divider factor in region (1) A (2) B (3) C (4) D */
-#define PCF8833_DF8COLOR 0xc6 /* Set divider frequency 8-colour mode; Data: (1) DF80-6 */
-#define PCF8833_SETBS 0xc7 /* Set bias system; Data: (1) Bias systems */
-#define PCF8833_RDTEMP 0xc8 /* Temperature read back; Data: none */
-#define PCF8833_NLI 0xc9 /* N-Line Inversion; Data: (1) NLI time slots invervsion */
-#define PCF8833_RDID1 0xda /* Read ID1; Data: none */
-#define PCF8833_RDID2 0xdb /* Read ID2; Data: none */
-#define PCF8833_RDID3 0xdc /* Read ID3; Data: none */
-#define PCF8833_SFD 0xef /* Select factory defaults; Data: none */
-#define PCF8833_ECM 0xf0 /* Enter Calibration mode; Data: (1) Calibration control settings */
-#define PCF8833_OTPSHTIN 0xf1 /* Shift data in OTP shift registers; Data: Any number of bytes */
-
-/* Memory data access control (MADCTL) bit definitions */
-
-#define MADCTL_RGB (1 << 3) /* Bit 3: BGR */
-#define MADCTL_LAO (1 << 4) /* Bit 4: Line address order bottom to top */
-#define MADCTL_V (1 << 5) /* Bit 5: Vertical RAM write; in Y direction */
-#define MADCTL_MX (1 << 6) /* Bit 6: Mirror X */
-#define MADCTL_MY (1 << 7) /* Bit 7: Mirror Y */
-
-/* PCF8833 status register bit definitions */
-/* CMD format: RDDST command followed by four status bytes: */
-/* Byte 1: D31 d30 D29 D28 D27 D26 --- --- */
-
-#define PCF8833_ST_RGB (1 << 2) /* Bit 2: D26 - RGB/BGR order */
-#define PCF8833_ST_LINEADDR (1 << 3) /* Bit 3: D27 - Line address order */
-#define PCF8833_ST_ADDRMODE (1 << 4) /* Bit 4: D28 - Vertical/horizontal addressing mode */
-#define PCF8833_ST_XADDR (1 << 5) /* Bit 5: D29 - X address order */
-#define PCF8833_ST_YADDR (1 << 6) /* Bit 6: D30 - Y address order */
-#define PCF8833_ST_BOOSTER (1 << 7) /* Bit 7: D31 - Booster voltage status */
-
-/* Byte 2: --- D22 D21 D20 D19 D18 D17 D16 */
-
-#define PCF8833_ST_NORMAL (1 << 0) /* Bit 0: D16 - Normal display mode */
-#define PCF8833_ST_SLEEPIN (1 << 1) /* Bit 1: D17 - Sleep in selected */
-#define PCF8833_ST_PARTIAL (1 << 2) /* Bit 2: D18 - Partial mode on */
-#define PCF8833_ST_IDLE (1 << 3) /* Bit 3: D19 - Idle mode selected */
-#define PCF8833_ST_PIXELFMT_SHIFT (4) /* Bits 4-6: D20-D22 - Interface pixel format */
-#define PCF8833_ST_PIXELFMT_MASK (7 << PCF8833_ST_PIXELFMT_SHIFT)
-# define PCF8833_ST_PIXELFMT_8BPS (PCF8833_FMT_8BPS << PCF8833_ST_PIXELFMT_SHIFT)
-# define PCF8833_ST_PIXELFMT_12BPS (PCF8833_FMT_12BPS << PCF8833_ST_PIXELFMT_SHIFT)
-# define PCF8833_ST_PIXELFMT_16BPS (PCF8833_FMT_16BPS << PCF8833_ST_PIXELFMT_SHIFT)
-
-/* Byte 3: D15 -- D13 D12 D11 D10 D9 --- */
-
-#define PCF8833_ST_TEARING (1 << 1) /* Bit 1: D9 - Tearing effect on */
-#define PCF8833_ST_DISPLAYON (1 << 2) /* Bit 2: D10 - Display on */
-#define PCF8833_ST_PIXELSOFF (1 << 3) /* Bit 3: D11 - All pixels off */
-#define PCF8833_ST_PIXELSON (1 << 4) /* Bit 4: D12 - All pixels on */
-#define PCF8833_ST_INV (1 << 5) /* Bit 5: D13 - Display inversion */
-#define PCF8833_ST_VSCROLL (1 << 7) /* Bit 6: D15 - Vertical scroll mode */
-
-/* Byte 4: All zero */
-
+/************************************************************************************** + * drivers/lcd/pcf8833.h + * Definitions for the Phillips PCF8833 LCD controller + * + * Copyright (C) 2010 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * References: "Data Sheet, PCF8833 STN RGB 132x132x3 driver," Phillips, 2003 Feb 14. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + **************************************************************************************/ + +#ifndef __DRIVERS_LCD_PCF8833_H +#define __DRIVERS_LCD_PCF8833_H + +/************************************************************************************** + * Included Files + **************************************************************************************/ + +/************************************************************************************** + * Pre-processor Definitions + **************************************************************************************/ +/* Pixel format codes */ + +#define PCF8833_FMT_8BPS (2) +#define PCF8833_FMT_12BPS (3) +#define PCF8833_FMT_16BPS (5) + +/* LCD Commands */ + +#define PCF8833_NOP 0x00 /* No operation; Data: none */ +#define PCF8833_SWRESET 0x01 /* Software reset ; Data: none */ +#define PCF8833_BSTROFF 0x02 /* Booster voltage off; Data: none */ +#define PCF8833_BSTRON 0x03 /* Booster voltage on; Data: none */ +#define PCF8833_RDDIDIF 0x04 /* Read display identification; Data: none */ +#define PCF8833_RDDST 0x09 /* Read display status; Data: none */ +#define PCF8833_SLEEPIN 0x10 /* Sleep_IN; Data: none */ +#define PCF8833_SLEEPOUT 0x11 /* Sleep_OUT; Data: none */ +#define PCF8833_PTLON 0x12 /* Partial mode on; Data: none */ +#define PCF8833_NORON 0x13 /* Normal Display mode on; Data: none */ +#define PCF8833_INVOFF 0x20 /* Display inversion off; Data: none */ +#define PCF8833_INVON 0x21 /* Display inversion on; Data: none */ +#define PCF8833_DALO 0x22 /* All pixel off; Data: none */ +#define PCF8833_DAL 0x23 /* All pixel on; Data: none */ +#define PCF8833_SETCON 0x25 /* Set contrast; Data: (1) contrast */ +#define PCF8833_DISPOFF 0x28 /* Display off; Data: none */ +#define PCF8833_DISPON 0x29 /* Display on; Data: none */ +#define PCF8833_CASET 0x2a /* Column address set; Data: (1) X start (2) X end */ +#define PCF8833_PASET 0x2b /* Page address set Data: (1) Y start (2) Y end */ +#define PCF8833_RAMWR 0x2c /* Memory write; Data: (1) write data */ +#define PCF8833_RGBSET 0x2d /* Colour set; Data: (1-8) red tones, (9-16) green tones, (17-20) blue tones */ +#define PCF8833_PTLAR 0x30 /* Partial area; Data: (1) start address (2) end address */ +#define PCF8833_VSCRDEF 0x33 /* Vertical scroll definition; Data: (1) top fixed, (2) scrol area, (3) bottom fixed */ +#define PCF8833_TEOFF 0x34 /* Tearing line off; Data: none */ +#define PCF8833_TEON 0x35 /* Tearing line on; Data: (1) don't care */ +#define PCF8833_MADCTL 0x36 /* Memory data access control; Data: (1) access control settings */ +#define PCF8833_SEP 0x37 /* Set Scroll Entry Point; Data: (1) scroll entry point */ +#define PCF8833_IDMOFF 0x38 /* Idle mode off; Data: none */ +#define PCF8833_IDMON 0x39 /* Idle mode on; Data: none */ +#define PCF8833_COLMOD 0x3a /* Interface pixel format; Data: (1) color interface format */ +#define PCF8833_SETVOP 0xb0 /* Set VOP; Data: (1) VOP5-8 (2) VOP0-4 */ +#define PCF8833_BRS 0xb4 /* Bottom Row Swap; Data: none */ +#define PCF8833_TRS 0xb6 /* Top Row Swap; Data: none */ +#define PCF8833_FINV 0xb9 /* Super Frame INVersion; Data: none */ +#define PCF8833_DOR 0xba /* Data ORder; Data: none */ +#define PCF8833_TCDFE 0xbd /* Enable/disable DF temp comp; Data: none */ +#define PCF8833_TCVOPE 0xbf /* Enable or disable VOP temp comp; Data: none */ +#define PCF8833_EC 0xc0 /* Internal or external oscillator; Data: none */ +#define PCF8833_SETMUL 0xc2 /* Set multiplication factor; Data: (1) Multiplication factor */ +#define PCF8833_TCVOPAB 0xc3 /* Set TCVOP slopes A and B; Data: (1) SLB and SLA */ +#define PCF8833_TCVOPCD 0xc4 /* Set TCVOP slopes C and D; Data: (1) SLD and SLC */ +#define PCF8833_TCDF 0xc5 /* Set divider frequency; Data: Divider factor in region (1) A (2) B (3) C (4) D */ +#define PCF8833_DF8COLOR 0xc6 /* Set divider frequency 8-colour mode; Data: (1) DF80-6 */ +#define PCF8833_SETBS 0xc7 /* Set bias system; Data: (1) Bias systems */ +#define PCF8833_RDTEMP 0xc8 /* Temperature read back; Data: none */ +#define PCF8833_NLI 0xc9 /* N-Line Inversion; Data: (1) NLI time slots invervsion */ +#define PCF8833_RDID1 0xda /* Read ID1; Data: none */ +#define PCF8833_RDID2 0xdb /* Read ID2; Data: none */ +#define PCF8833_RDID3 0xdc /* Read ID3; Data: none */ +#define PCF8833_SFD 0xef /* Select factory defaults; Data: none */ +#define PCF8833_ECM 0xf0 /* Enter Calibration mode; Data: (1) Calibration control settings */ +#define PCF8833_OTPSHTIN 0xf1 /* Shift data in OTP shift registers; Data: Any number of bytes */ + +/* Memory data access control (MADCTL) bit definitions */ + +#define MADCTL_RGB (1 << 3) /* Bit 3: BGR */ +#define MADCTL_LAO (1 << 4) /* Bit 4: Line address order bottom to top */ +#define MADCTL_V (1 << 5) /* Bit 5: Vertical RAM write; in Y direction */ +#define MADCTL_MX (1 << 6) /* Bit 6: Mirror X */ +#define MADCTL_MY (1 << 7) /* Bit 7: Mirror Y */ + +/* PCF8833 status register bit definitions */ +/* CMD format: RDDST command followed by four status bytes: */ +/* Byte 1: D31 d30 D29 D28 D27 D26 --- --- */ + +#define PCF8833_ST_RGB (1 << 2) /* Bit 2: D26 - RGB/BGR order */ +#define PCF8833_ST_LINEADDR (1 << 3) /* Bit 3: D27 - Line address order */ +#define PCF8833_ST_ADDRMODE (1 << 4) /* Bit 4: D28 - Vertical/horizontal addressing mode */ +#define PCF8833_ST_XADDR (1 << 5) /* Bit 5: D29 - X address order */ +#define PCF8833_ST_YADDR (1 << 6) /* Bit 6: D30 - Y address order */ +#define PCF8833_ST_BOOSTER (1 << 7) /* Bit 7: D31 - Booster voltage status */ + +/* Byte 2: --- D22 D21 D20 D19 D18 D17 D16 */ + +#define PCF8833_ST_NORMAL (1 << 0) /* Bit 0: D16 - Normal display mode */ +#define PCF8833_ST_SLEEPIN (1 << 1) /* Bit 1: D17 - Sleep in selected */ +#define PCF8833_ST_PARTIAL (1 << 2) /* Bit 2: D18 - Partial mode on */ +#define PCF8833_ST_IDLE (1 << 3) /* Bit 3: D19 - Idle mode selected */ +#define PCF8833_ST_PIXELFMT_SHIFT (4) /* Bits 4-6: D20-D22 - Interface pixel format */ +#define PCF8833_ST_PIXELFMT_MASK (7 << PCF8833_ST_PIXELFMT_SHIFT) +# define PCF8833_ST_PIXELFMT_8BPS (PCF8833_FMT_8BPS << PCF8833_ST_PIXELFMT_SHIFT) +# define PCF8833_ST_PIXELFMT_12BPS (PCF8833_FMT_12BPS << PCF8833_ST_PIXELFMT_SHIFT) +# define PCF8833_ST_PIXELFMT_16BPS (PCF8833_FMT_16BPS << PCF8833_ST_PIXELFMT_SHIFT) + +/* Byte 3: D15 -- D13 D12 D11 D10 D9 --- */ + +#define PCF8833_ST_TEARING (1 << 1) /* Bit 1: D9 - Tearing effect on */ +#define PCF8833_ST_DISPLAYON (1 << 2) /* Bit 2: D10 - Display on */ +#define PCF8833_ST_PIXELSOFF (1 << 3) /* Bit 3: D11 - All pixels off */ +#define PCF8833_ST_PIXELSON (1 << 4) /* Bit 4: D12 - All pixels on */ +#define PCF8833_ST_INV (1 << 5) /* Bit 5: D13 - Display inversion */ +#define PCF8833_ST_VSCROLL (1 << 7) /* Bit 6: D15 - Vertical scroll mode */ + +/* Byte 4: All zero */ + #endif /* __DRIVERS_LCD_PCF8833_H */
\ No newline at end of file diff --git a/nuttx/drivers/lcd/s1d15g10.h b/nuttx/drivers/lcd/s1d15g10.h index df2dd8be2..9b5f7738f 100644 --- a/nuttx/drivers/lcd/s1d15g10.h +++ b/nuttx/drivers/lcd/s1d15g10.h @@ -1,141 +1,141 @@ -/**************************************************************************************
- * drivers/lcd/s1d15g10.h
- * Definitions for the Epson S1D15G0 LCD controller
- *
- * Copyright (C) 2010 Gregory Nutt. All rights reserved.
- * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
- *
- * References: S1D15G0D08B000, Seiko Epson Corportation, 2002.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- * used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- **************************************************************************************/
-
-#ifndef __DRIVERS_LCD_S1D15G10_H
-#define __DRIVERS_LCD_S1D15G10_H
-
-/**************************************************************************************
- * Included Files
- **************************************************************************************/
-
-/**************************************************************************************
- * Pre-processor Definitions
- **************************************************************************************/
-
-/* Epson S1D15G10 Command Set */
-
-#define S1D15G10_DISON 0xaf /* Display on; Data: none */
-#define S1D15G10_DISOFF 0xae /* Display off; Data: none */
-#define S1D15G10_DISNOR 0xa6 /* Normal display; Data: none */
-#define S1D15G10_DISINV 0xa7 /* Inverse display; Data: none */
-#define S1D15G10_COMSCN 0xbb /* Common scan direction; Data: (1) common scan direction */
-#define S1D15G10_DISCTL 0xca /* Display control; Data: Data: (1) CL div, F1/2 pat, (2) duty, (3) FR inverse (4) dispersion */
-#define S1D15G10_SLPIN 0x95 /* Sleep in; Data: none */
-#define S1D15G10_SLPOUT 0x94 /* Sleep out; Data: none */
-#define S1D15G10_PASET 0x75 /* Page address set; Data: (1) start page, (2) end page */
-#define S1D15G10_CASET 0x15 /* Column address set; Data: (1) start addr, (2) end addr */
-#define S1D15G10_DATCTL 0xbc /* Data scan direction, etc.; Data: (1) inverse, scan dir (2) RGB, (3) gray-scale */
-#define S1D15G10_RGBSET8 0xce /* 256-color position set; Data: (1-8) red tones, (9-16) green tones, (17-20) blue tones */
-#define S1D15G10_RAMWR 0x5c /* Writing to memory; Data: (1) write data */
-#define S1D15G10_RAMRD 0x5d /* Reading from memory; Data: (1) read data */
-#define S1D15G10_PTLIN 0xa8 /* Partial display in; Data: (1) start addr, (2) end addr */
-#define S1D15G10_PTLOUT 0xa9 /* Partial display out; Data: none */
-#define S1D15G10_RMWIN 0xe0 /* Read and modify write; Data: none */
-#define S1D15G10_RMWOUT 0xee /* End; Data: none */
-#define S1D15G10_ASCSET 0xaa /* Area scroll set; Data: (1) top addr, (2) bottom addr, (3) Num blocks, (4) scroll mode */
-#define S1D15G10_SCSTART 0xab /* Scroll start set; Data: (1) start block addr */
-#define S1D15G10_OSCON 0xd1 /* Internal oscillation on; Data: none */
-#define S1D15G10_OSCOFF 0xd2 /* Internal oscillation off; Data: none */
-#define S1D15G10_PWRCTR 0x20 /* Power control; Data: (1) LCD drive power */
-#define S1D15G10_VOLCTR 0x81 /* Electronic volume control; Data: (1) volume value, (2) resistance ratio */
-#define S1D15G10_VOLUP 0xd6 /* Increment electronic control by 1; Data: none */
-#define S1D15G10_VOLDOWN 0xd7 /* Decrement electronic control by 1; Data: none */
-#define S1D15G10_TMPGRD 0x82 /* Temperature gradient set; Data: (1-14) temperature gradient */
-#define S1D15G10_EPCTIN 0xcd /* Control EEPROM; Data: (1) read/write */
-#define S1D15G10_EPCOUT 0xcc /* Cancel EEPROM control; Data: none */
-#define S1D15G10_EPMWR 0xfc /* Write into EEPROM; Data: none */
-#define S1D15G10_EPMRD 0xfd /* Read from EEPROM; Data: none */
-#define S1D15G10_EPSRRD1 0x7c /* Read register 1; Data: none */
-#define S1D15G10_EPSRRD2 0x7d /* Read regiser 2; Data: none */
-#define S1D15G10_NOP 0x25 /* NOP intruction (0x45?); Data: none */
-#define S1D15G10_STREAD 0x20 /* Status read; Data: none */
-
-/* Display control (DISCTL) bit definitions */
-
-#define DISCTL_PERIOD_SHIFT (0) /* P1: Bits 0-1, F1 and F2 drive-pattern switching period */
-#define DISCTL_PERIOD_MASK (3 << DISCTL_PERIOD_SHIFT)
-# define DISCTL_PERIOD_8 (0 << DISCTL_PERIOD_SHIFT)
-# define DISCTL_PERIOD_4 (1 << DISCTL_PERIOD_SHIFT)
-# define DISCTL_PERIOD_16 (2 << DISCTL_PERIOD_SHIFT)
-# define DISCTL_PERIOD_FLD (3 << DISCTL_PERIOD_SHIFT)
-#define DISCTL_CLDIV_SHIFT (2) /* P1: Bits 2-4, Clock divider */
-#define DISCTL_CLDIV_MASK (7 << DISCTL_CLDIV_SHIFT)
-# define DISCTL_CLDIV_2 (0 << DISCTL_CLDIV_SHIFT)
-# define DISCTL_CLDIV_4 (1 << DISCTL_CLDIV_SHIFT)
-# define DISCTL_CLDIV_8 (2 << DISCTL_CLDIV_SHIFT)
-# define DISCTL_CLDIV_NONE (3 << DISCTL_CLDIV_SHIFT)
-
-/* Power control (PWRCTR) bit definitions */
-
-#define PWCTR_REFVOLTAGE (1 << 0) /* P1: Bit 0, Turn on reference voltage generation circuit. */
-#define PWCTR_REGULATOR (1 << 1) /* P1: Bit 1, Turn on voltage regulator and circuit voltage follower. */
-#define PWCTR_BOOSTER2 (1 << 2) /* P1: Bit 2, Turn on secondary booster/step-down circuit. */
-#define PWCTR_BOOSTER1 (1 << 3) /* P1: Bit 3, Turn on primary booster circuit. */
-#define PWCTR_EXTR (1 << 4) /* P1: Bit 4, Use external resistance to adjust voltage. */
-
-/* Data control (DATCTL) bit definitions */
-
-#define DATCTL_PGADDR_INV (1 << 0) /* P1: Bit 0, Inverse display of the page address. */
-#define DATCTL_COLADDR_REV (1 << 1) /* P1: Bit 1, Reverse turn of column address. */
-#define DATCTL_ADDR_PGDIR (1 << 2) /* P1: Bit 2, Address-scan direction in page (vs column) direction. */
-
-#define DATCTL_BGR (1 << 0) /* P2: Bit0, RGB->BGR */
-
-#define DATCTL_8GRAY (1) /* P3: Bits 0-2 = 001, 8 gray-scale */
-#define DATCTL_16GRAY_A (2) /* P3: Bits 0-2 = 010, 16 gray-scale display type A */
-#define DATCTL_16GRAY_B (4) /* P3: Bits 0-2 = 100, 16 gray-scale display type B */
-
-/* Status register bit definions (after reset or NOP) */
-
-#define S1D15G10_SR_PARTIAL (1 << 0) /* Bit 0: Partial display */
-#define S1D15G10_SR_NORMAL (1 << 1) /* Bit 1: Normal (vs. inverse) display */
-#define S1D15G10_SR_EEPROM (1 << 2) /* Bit 2: EEPROM access */
-#define S1D15G10_SR_DISPON (1 << 3) /* Bit 3: Display on */
-#define S1D15G10_SR_COLSCAN (1 << 4) /* Bit 4: Column (vs. page) scan direction */
-#define S1D15G10_SR_RMW (1 << 5) /* Bit 5: Read modify write */
-#define S1D15G10_SR_SCROLL (3 << 6) /* Bits 6-7: Area scroll mode */
-
-/* Status register bit definions (after EPSRRD1) */
-
-#define S1D15G10_SR_VOLUME 0x3f /* Bits 0-5: Electronic volume control values */
-
-/* Status register bit definions (after EPSRRD2) */
-
-#define S1D15G10_SR_RRATIO 0x07 /* Bits 0-2: Built-in resistance ratio */
-
+/************************************************************************************** + * drivers/lcd/s1d15g10.h + * Definitions for the Epson S1D15G0 LCD controller + * + * Copyright (C) 2010 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * References: S1D15G0D08B000, Seiko Epson Corportation, 2002. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + **************************************************************************************/ + +#ifndef __DRIVERS_LCD_S1D15G10_H +#define __DRIVERS_LCD_S1D15G10_H + +/************************************************************************************** + * Included Files + **************************************************************************************/ + +/************************************************************************************** + * Pre-processor Definitions + **************************************************************************************/ + +/* Epson S1D15G10 Command Set */ + +#define S1D15G10_DISON 0xaf /* Display on; Data: none */ +#define S1D15G10_DISOFF 0xae /* Display off; Data: none */ +#define S1D15G10_DISNOR 0xa6 /* Normal display; Data: none */ +#define S1D15G10_DISINV 0xa7 /* Inverse display; Data: none */ +#define S1D15G10_COMSCN 0xbb /* Common scan direction; Data: (1) common scan direction */ +#define S1D15G10_DISCTL 0xca /* Display control; Data: Data: (1) CL div, F1/2 pat, (2) duty, (3) FR inverse (4) dispersion */ +#define S1D15G10_SLPIN 0x95 /* Sleep in; Data: none */ +#define S1D15G10_SLPOUT 0x94 /* Sleep out; Data: none */ +#define S1D15G10_PASET 0x75 /* Page address set; Data: (1) start page, (2) end page */ +#define S1D15G10_CASET 0x15 /* Column address set; Data: (1) start addr, (2) end addr */ +#define S1D15G10_DATCTL 0xbc /* Data scan direction, etc.; Data: (1) inverse, scan dir (2) RGB, (3) gray-scale */ +#define S1D15G10_RGBSET8 0xce /* 256-color position set; Data: (1-8) red tones, (9-16) green tones, (17-20) blue tones */ +#define S1D15G10_RAMWR 0x5c /* Writing to memory; Data: (1) write data */ +#define S1D15G10_RAMRD 0x5d /* Reading from memory; Data: (1) read data */ +#define S1D15G10_PTLIN 0xa8 /* Partial display in; Data: (1) start addr, (2) end addr */ +#define S1D15G10_PTLOUT 0xa9 /* Partial display out; Data: none */ +#define S1D15G10_RMWIN 0xe0 /* Read and modify write; Data: none */ +#define S1D15G10_RMWOUT 0xee /* End; Data: none */ +#define S1D15G10_ASCSET 0xaa /* Area scroll set; Data: (1) top addr, (2) bottom addr, (3) Num blocks, (4) scroll mode */ +#define S1D15G10_SCSTART 0xab /* Scroll start set; Data: (1) start block addr */ +#define S1D15G10_OSCON 0xd1 /* Internal oscillation on; Data: none */ +#define S1D15G10_OSCOFF 0xd2 /* Internal oscillation off; Data: none */ +#define S1D15G10_PWRCTR 0x20 /* Power control; Data: (1) LCD drive power */ +#define S1D15G10_VOLCTR 0x81 /* Electronic volume control; Data: (1) volume value, (2) resistance ratio */ +#define S1D15G10_VOLUP 0xd6 /* Increment electronic control by 1; Data: none */ +#define S1D15G10_VOLDOWN 0xd7 /* Decrement electronic control by 1; Data: none */ +#define S1D15G10_TMPGRD 0x82 /* Temperature gradient set; Data: (1-14) temperature gradient */ +#define S1D15G10_EPCTIN 0xcd /* Control EEPROM; Data: (1) read/write */ +#define S1D15G10_EPCOUT 0xcc /* Cancel EEPROM control; Data: none */ +#define S1D15G10_EPMWR 0xfc /* Write into EEPROM; Data: none */ +#define S1D15G10_EPMRD 0xfd /* Read from EEPROM; Data: none */ +#define S1D15G10_EPSRRD1 0x7c /* Read register 1; Data: none */ +#define S1D15G10_EPSRRD2 0x7d /* Read regiser 2; Data: none */ +#define S1D15G10_NOP 0x25 /* NOP intruction (0x45?); Data: none */ +#define S1D15G10_STREAD 0x20 /* Status read; Data: none */ + +/* Display control (DISCTL) bit definitions */ + +#define DISCTL_PERIOD_SHIFT (0) /* P1: Bits 0-1, F1 and F2 drive-pattern switching period */ +#define DISCTL_PERIOD_MASK (3 << DISCTL_PERIOD_SHIFT) +# define DISCTL_PERIOD_8 (0 << DISCTL_PERIOD_SHIFT) +# define DISCTL_PERIOD_4 (1 << DISCTL_PERIOD_SHIFT) +# define DISCTL_PERIOD_16 (2 << DISCTL_PERIOD_SHIFT) +# define DISCTL_PERIOD_FLD (3 << DISCTL_PERIOD_SHIFT) +#define DISCTL_CLDIV_SHIFT (2) /* P1: Bits 2-4, Clock divider */ +#define DISCTL_CLDIV_MASK (7 << DISCTL_CLDIV_SHIFT) +# define DISCTL_CLDIV_2 (0 << DISCTL_CLDIV_SHIFT) +# define DISCTL_CLDIV_4 (1 << DISCTL_CLDIV_SHIFT) +# define DISCTL_CLDIV_8 (2 << DISCTL_CLDIV_SHIFT) +# define DISCTL_CLDIV_NONE (3 << DISCTL_CLDIV_SHIFT) + +/* Power control (PWRCTR) bit definitions */ + +#define PWCTR_REFVOLTAGE (1 << 0) /* P1: Bit 0, Turn on reference voltage generation circuit. */ +#define PWCTR_REGULATOR (1 << 1) /* P1: Bit 1, Turn on voltage regulator and circuit voltage follower. */ +#define PWCTR_BOOSTER2 (1 << 2) /* P1: Bit 2, Turn on secondary booster/step-down circuit. */ +#define PWCTR_BOOSTER1 (1 << 3) /* P1: Bit 3, Turn on primary booster circuit. */ +#define PWCTR_EXTR (1 << 4) /* P1: Bit 4, Use external resistance to adjust voltage. */ + +/* Data control (DATCTL) bit definitions */ + +#define DATCTL_PGADDR_INV (1 << 0) /* P1: Bit 0, Inverse display of the page address. */ +#define DATCTL_COLADDR_REV (1 << 1) /* P1: Bit 1, Reverse turn of column address. */ +#define DATCTL_ADDR_PGDIR (1 << 2) /* P1: Bit 2, Address-scan direction in page (vs column) direction. */ + +#define DATCTL_BGR (1 << 0) /* P2: Bit0, RGB->BGR */ + +#define DATCTL_8GRAY (1) /* P3: Bits 0-2 = 001, 8 gray-scale */ +#define DATCTL_16GRAY_A (2) /* P3: Bits 0-2 = 010, 16 gray-scale display type A */ +#define DATCTL_16GRAY_B (4) /* P3: Bits 0-2 = 100, 16 gray-scale display type B */ + +/* Status register bit definions (after reset or NOP) */ + +#define S1D15G10_SR_PARTIAL (1 << 0) /* Bit 0: Partial display */ +#define S1D15G10_SR_NORMAL (1 << 1) /* Bit 1: Normal (vs. inverse) display */ +#define S1D15G10_SR_EEPROM (1 << 2) /* Bit 2: EEPROM access */ +#define S1D15G10_SR_DISPON (1 << 3) /* Bit 3: Display on */ +#define S1D15G10_SR_COLSCAN (1 << 4) /* Bit 4: Column (vs. page) scan direction */ +#define S1D15G10_SR_RMW (1 << 5) /* Bit 5: Read modify write */ +#define S1D15G10_SR_SCROLL (3 << 6) /* Bits 6-7: Area scroll mode */ + +/* Status register bit definions (after EPSRRD1) */ + +#define S1D15G10_SR_VOLUME 0x3f /* Bits 0-5: Electronic volume control values */ + +/* Status register bit definions (after EPSRRD2) */ + +#define S1D15G10_SR_RRATIO 0x07 /* Bits 0-2: Built-in resistance ratio */ + #endif /* __DRIVERS_LCD_S1D15G10_H */
\ No newline at end of file diff --git a/nuttx/drivers/lcd/skeleton.c b/nuttx/drivers/lcd/skeleton.c index 1cb8b5955..83aa92018 100644 --- a/nuttx/drivers/lcd/skeleton.c +++ b/nuttx/drivers/lcd/skeleton.c @@ -2,7 +2,7 @@ * drivers/lcd/skeleton.c * * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions diff --git a/nuttx/drivers/lcd/ssd1305.h b/nuttx/drivers/lcd/ssd1305.h index 87c955de4..34678fa80 100644 --- a/nuttx/drivers/lcd/ssd1305.h +++ b/nuttx/drivers/lcd/ssd1305.h @@ -1,211 +1,211 @@ -/**************************************************************************************
- * drivers/lcd/ssd1305.h
- * Definitions for the Solomon Systech SSD1305 132x64 Dot Matrix OLED/PLED
- * Segment/Common Driver with C
- *
- * Copyright (C) 2010 Gregory Nutt. All rights reserved.
- * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
- *
- * References: SSD1305.pdf, "Solomon Systech SSD1305 132x64 Dot Matrix OLED/PLED
- * Segment/Common Driver with Controller," Solomon Systech Limited,
- * http://www.solomon-systech.com, May, 2008.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- * used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- **************************************************************************************/
-
-#ifndef __DRIVERS_LCD_SSD1305_H
-#define __DRIVERS_LCD_SSD1305_H
-
-/**************************************************************************************
- * Included Files
- **************************************************************************************/
-
-/**************************************************************************************
- * Pre-processor Definitions
- **************************************************************************************/
-/* General Definitions ******************************************************/
-
-#define SSD1305_COLORA 0
-#define SSD1305_COLORB 1
-#define SSD1305_COLORC 2
-#define SSD1305_COLORD 3
-
-/* Fundamental Commands *****************************************************/
-#define SSD1305_SETCOLL 0x00 /* 0x00-0x0f: Set lower column address */
-# define SSD1305_COLL_MASK 0x0f
-#define SSD1305_SETCOLH 0x10 /* 0x10-0x1f: Set higher column address */
-# define SSD1305_COLH_MASK 0x0f
-#define SSD1305_ADDRMODE 0x20 /* 0x20: Set memory address mode */
-# define SSD1305_ADDRMODE_HOR 0x00 /* Data 1: Set horizontal address mode */
-# define SSD1305_ADDRMODE_VIRT 0x01 /* Data 1: Set virtal address mode */
-# define SSD1305_ADDRMODE_PAGE 0x02 /* Data 1: Set page address mode */
-#define SSD1305_SETCOLADDR 0x21 /* 0x21: Set column address */
- /* Data 1: Column start address: 0-131 */
- /* Data 2: Column end address: 0-131 */
-#define SSD1305_SETPAGEADDR 0x22 /* 0x22: Set page address */
- /* Data 1: Page start address: 0x00-0x7d */
- /* Data 2: Page end address: 0x00-0x7d */
-#define SSD1305_SETSTARTLINE 0x40 /* 0x40-7f: Set display start line */
-# define SSD1305_STARTLINE_MASK 0x3f
-
-#define SSD1305_SETCONTRAST 0x81 /* 0x81: Set contrast control */
- /* Data 1: Set 1 of 256 contrast steps */
-#define SSD1305_SETBRIGHTNESS 0x82 /* 0x82: Set brightness */
- /* Data 1: Set 1 of 256 contrast steps */
-#define SSD1305_SETLUT 0x91 /* 0x01: Set lookup table */
- /* Data 1: Pulse width: 31-63 */
- /* Data 2: Color A: 31-63 */
- /* Data 3: Color B: 31-63 */
- /* Data 4: Color C: 31-63 */
-#define SSD1305_SETBANKCOLOR1 0x92 /* 0x92: Set bank 1-16 color */
-# define SSD1305_SETBANK1(c) (c) /* Data 1, Bits 0-1: Bank 1 color */
-# define SSD1305_SETBANK2(c) (c << 2) /* Data 1, Bits 2-3: Bank 2 color */
-# define SSD1305_SETBANK3(c) (c << 4) /* Data 1, Bits 4-5: Bank 3 color */
-# define SSD1305_SETBANK4(c) (c << 6) /* Data 1, Bits 6-7: Bank 4 color */
-# define SSD1305_SETBANK5(c) (c) /* Data 2, Bits 0-1: Bank 5 color */
-# define SSD1305_SETBANK6(c) (c << 2) /* Data 2, Bits 2-3: Bank 6 color */
-# define SSD1305_SETBANK7(c) (c << 4) /* Data 2, Bits 4-5: Bank 7 color */
-# define SSD1305_SETBANK8(c) (c << 6) /* Data 2, Bits 6-7: Bank 8 color */
-# define SSD1305_SETBANK9(c) (c) /* Data 3, Bits 0-1: Bank 9 color */
-# define SSD1305_SETBANK10(c) (c << 2) /* Data 3, Bits 2-3: Bank 10 color */
-# define SSD1305_SETBANK11(c) (c << 4) /* Data 3, Bits 4-5: Bank 11 color */
-# define SSD1305_SETBANK12(c) (c << 6) /* Data 3, Bits 6-7: Bank 12 color */
-# define SSD1305_SETBANK13(c) (c) /* Data 4, Bits 0-1: Bank 13 color */
-# define SSD1305_SETBANK14(c) (c << 2) /* Data 4, Bits 2-3: Bank 14 color */
-# define SSD1305_SETBANK15(c) (c << 4) /* Data 4, Bits 4-5: Bank 15 color */
-# define SSD1305_SETBANK16(c) (c << 6) /* Data 4, Bits 6-7: Bank 16 color */
-#define SSD1305_SETBANKCOLOR2 0x93 /* 0x93: Set bank 17-32 color */
-# define SSD1305_SETBANK17(c) (c) /* Data 1, Bits 0-1: Bank 17 color */
-# define SSD1305_SETBANK18(c) (c << 2) /* Data 1, Bits 2-3: Bank 18 color */
-# define SSD1305_SETBANK19(c) (c << 4) /* Data 1, Bits 4-5: Bank 19 color */
-# define SSD1305_SETBANK20(c) (c << 6) /* Data 1, Bits 6-7: Bank 20 color */
-# define SSD1305_SETBANK21(c) (c) /* Data 2, Bits 0-1: Bank 21 color */
-# define SSD1305_SETBANK22(c) (c << 2) /* Data 2, Bits 2-3: Bank 22 color */
-# define SSD1305_SETBANK23(c) (c << 4) /* Data 2, Bits 4-5: Bank 23 color */
-# define SSD1305_SETBANK24(c) (c << 6) /* Data 2, Bits 6-7: Bank 24 color */
-# define SSD1305_SETBANK25(c) (c) /* Data 3, Bits 0-1: Bank 25 color */
-# define SSD1305_SETBANK26(c) (c << 2) /* Data 3, Bits 2-3: Bank 26 color */
-# define SSD1305_SETBANK27(c) (c << 4) /* Data 3, Bits 4-5: Bank 27 color */
-# define SSD1305_SETBANK28(c) (c << 6) /* Data 3, Bits 6-7: Bank 28 color */
-# define SSD1305_SETBANK29(c) (c) /* Data 4, Bits 0-1: Bank 29 color */
-# define SSD1305_SETBANK30(c) (c << 2) /* Data 4, Bits 2-3: Bank 30 color */
-# define SSD1305_SETBANK31(c) (c << 4) /* Data 4, Bits 4-5: Bank 31 color */
-# define SSD1305_SETBANK32(c) (c << 6) /* Data 4, Bits 6-7: Bank 32 color */
-#define SSD1305_MAPCOL0 0xa0 /* 0xa0: Column address 0 is mapped to SEG0 */
-#define SSD1305_MAPCOL131 0xa1 /* 0xa1: Column address 131 is mapped to SEG0 */
-#define SSD1305_DISPRAM 0xa4 /* 0xa4: Resume to RAM content display */
-#define SSD1305_DISPENTIRE 0xa5 /* 0xa5: Entire display ON */
-#define SSD1305_DISPNORMAL 0xa6 /* 0xa6: Normal display */
-#define SSD1305_DISPINVERTED 0xa7 /* 0xa7: Inverse display */
-
-#define SSD1305_SETMUX 0xa8 /* 0xa8: Set Multiplex Ratio*/
- /* Data 1: MUX ratio -1: 15-63 */
-#define SSD1305_DIMMODE 0xab /* 0xab: Dim mode setting */
- /* Data 1: Reserverd, must be zero */
- /* Data 2: Contrast for bank1: 0-255 */
- /* Data 3: Brightness for color bank: 0-255 */
-#define SSD1305_MSTRCONFIG 0xad /* 0xad: Master configuration */
-# define SSD1305_MSTRCONFIG_EXTVCC 0x8e /* Data 1: Select external Vcc */
-#define SSD1305_DISPONDIM 0xac /* 0xac: Display ON in dim mode */
-#define SSD1305_DISPOFF 0xae /* 0xae: Display OFF (sleep mode) */
-#define SSD1305_DISPON 0xaf /* 0xaf: Display ON in normal mode */
-#define SSD1305_SETPAGESTART 0xb0 /* 0xb0-b7: Set page start address */
-# define SSD1305_PAGESTART_MASK 0x07
-#define SSD1305_SETCOMNORMAL 0xc0 /* 0xc0: Set COM output, normal mode */
-#define SSD1305_SETCOMREMAPPED 0xc8 /* 0xc8: Set COM output, remapped mode */
-
-#define SSD1305_SETOFFSET 0xd3 /* 0xd3: Set display offset */
- /* Data 1: Vertical shift by COM: 0-63 */
-#define SSD1305_SETDCLK 0xd5 /* 0xd5: Set display clock divide ratio/oscillator */
-# define SSD1305_DCLKDIV_SHIFT (0) /* Data 1, Bits 0-3: DCLK divide ratio/frequency*/
-# define SSD1305_DCLKDIV_MASK 0x0f
-# define SSD1305_DCLKFREQ_SHIFT (4) /* Data 1, Bits 4-7: DCLK divide oscillator frequency */
-# define SSD1305_DCLKFREQ_MASK 0xf0
-#define SSD1305_SETCOLORMODE 0xd8 /* 0xd: Set area color and low power display modes */
-# define SSD1305_COLORMODE_MONO 0x00 /* Data 1, Bits 4-5: 00=monochrome */
-# define SSD1305_COLORMODE_COLOR 0x30 /* Data 1, Bits 4-5: 11=area color enable */
-# define SSD1305_POWERMODE_NORMAL 0x00 /* Data 1, Bits 0,2: 00=normal power mode */
-# define SSD1305_POWERMODE_LOW 0x05 /* Data 1, Bits 0,2: 11=low power display mode */
-#define SSD1305_SETPRECHARGE 0xd9 /* 0xd9: Set pre-charge period */
-# define SSD1305_PHASE1_SHIFT (0) /* Data 1, Bits 0-3: Phase 1 period of up to 15 DCLK clocks */
-# define SSD1305_PHASE1_MASK 0x0f
-# define SSD1305_PHASE2_SHIFT (4) /* Data 1, Bits 4-7: Phase 2 period of up to 15 DCLK clocks */
-# define SSD1305_PHASE2_MASK 0xf0
-#define SSD1305_SETCOMCONFIG 0xda /* 0xda: Set COM configuration */
-# define SSD1305_COMCONFIG_SEQ 0x02 /* Data 1, Bit 4: 0=Sequential COM pin configuration */
-# define SSD1305_COMCONFIG_ALT 0x12 /* Data 1, Bit 4: 1=Alternative COM pin configuration */
-# define SSD1305_COMCONFIG_NOREMAP 0x02 /* Data 1, Bit 5: 0=Disable COM Left/Right remap */
-# define SSD1305_COMCONFIG_REMAP 0x22 /* Data 1, Bit 5: 1=Enable COM Left/Right remap */
-#define SSD1305_SETVCOMHDESEL 0xdb /* 0xdb: Set VCOMH delselect level */
-# define SSD1305_VCOMH_x4p3 0x00 /* Data 1: ~0.43 x Vcc */
-# define SSD1305_VCOMH_x7p7 0x34 /* Data 1: ~0.77 x Vcc */
-# define SSD1305_VCOMH_x8p3 0x3c /* Data 1: ~0.83 x Vcc */
-#define SSD1305_ENTER_RMWMODE 0xe0 /* 0xe0: Enter the Read Modify Write mode */
-#define SSD1305_NOP 0xe3 /* 0xe3: NOP Command for no operation */
-#define SSD1305_EXIT_RMWMODE 0xee /* 0xee: Leave the Read Modify Write mode */
-
-/* Graphic Acceleration Commands ********************************************/
-
-#define SSD1305_HSCROLL_RIGHT 0x26 /* 0x26: Right horizontal scroll */
-#define SSD1305_HSCROLL_LEFT 0x27 /* 0x27: Left horizontal scroll */
- /* Data 1, Bits 0-2: Column scroll offset: 0-4 */
- /* Data 2, Bits 0-2: Start page address: 0-7 */
-#define SSD1305_HSCROLL_FRAMES6 0x00 /* Data 3, Bits 0-2: Timer interval, 000=6 frames */
-#define SSD1305_HSCROLL_FRAMES32 0x01 /* Data 3, Bits 0-2: Timer interval, 001=32 frames */
-#define SSD1305_HSCROLL_FRAMES64 0x02 /* Data 3, Bits 0-2: Timer interval, 010=64 frames */
-#define SSD1305_HSCROLL_FRAMES128 0x03 /* Data 3, Bits 0-2: Timer interval, 011=128 frames */
-#define SSD1305_HSCROLL_FRAMES3 0x04 /* Data 3, Bits 0-2: Timer interval, 100=3 frames */
-#define SSD1305_HSCROLL_FRAMES4 0x05 /* Data 3, Bits 0-2: Timer interval, 101=4 frames */
-#define SSD1305_HSCROLL_FRAMES2 0x06 /* Data 3, Bits 0-2: Timer interval, 110=2 frames */
- /* Data 4, Bits 0-2: End page address: 0-7 */
-
-#define SSD1305_VSCROLL_RIGHT 0x29 /* 0x26: Vertical and right horizontal scroll */
-#define SSD1305_VSCROLL_LEFT 0x2a /* 0x27: Vertical and left horizontal scroll */
- /* Data 1, Bits 0-2: Column scroll offset: 0-4 */
- /* Data 2, Bits 0-2: Start page address: 0-7 */
-#define SSD1305_VSCROLL_FRAMES6 0x00 /* Data 3, Bits 0-2: Timer interval, 000=6 frames */
-#define SSD1305_VSCROLL_FRAMES32 0x01 /* Data 3, Bits 0-2: Timer interval, 001=32 frames */
-#define SSD1305_VSCROLL_FRAMES64 0x02 /* Data 3, Bits 0-2: Timer interval, 010=64 frames */
-#define SSD1305_VSCROLL_FRAMES128 0x03 /* Data 3, Bits 0-2: Timer interval, 011=128 frames */
-#define SSD1305_VSCROLL_FRAMES3 0x04 /* Data 3, Bits 0-2: Timer interval, 100=3 frames */
-#define SSD1305_VSCROLL_FRAMES4 0x05 /* Data 3, Bits 0-2: Timer interval, 101=4 frames */
-#define SSD1305_VSCROLL_FRAMES2 0x06 /* Data 3, Bits 0-2: Timer interval, 110=2 frames */
- /* Data 4, Bits 0-2: End page address: 0-7 */
- /* Data 5, Bits 0-5: Vertical scrolling offset: 0-63 */
-#define SSD1305_SCROLL_STOP 0x2e /* 0x2e: Deactivate scroll */
-#define SSD1305_SCROLL_START 0x2f /* 0x2f: Activate scroll */
-#define SSD1305_VSCROLL_AREA 0xa3 /* 0xa3: Set vertical scroll area */
- /* Data 1: Number of rows in the top fixed area */
- /* Data 1: Number of rows in the scroll area */
-
-/* Status register bit definitions ******************************************/
-
-#define SSD1305_STATUS_DISPOFF (1 << 6) /* Bit 6: 1=Display off */
-
-#endif /* __DRIVERS_LCD_SSD1305_H */
+/************************************************************************************** + * drivers/lcd/ssd1305.h + * Definitions for the Solomon Systech SSD1305 132x64 Dot Matrix OLED/PLED + * Segment/Common Driver with C + * + * Copyright (C) 2010 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * References: SSD1305.pdf, "Solomon Systech SSD1305 132x64 Dot Matrix OLED/PLED + * Segment/Common Driver with Controller," Solomon Systech Limited, + * http://www.solomon-systech.com, May, 2008. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + **************************************************************************************/ + +#ifndef __DRIVERS_LCD_SSD1305_H +#define __DRIVERS_LCD_SSD1305_H + +/************************************************************************************** + * Included Files + **************************************************************************************/ + +/************************************************************************************** + * Pre-processor Definitions + **************************************************************************************/ +/* General Definitions ******************************************************/ + +#define SSD1305_COLORA 0 +#define SSD1305_COLORB 1 +#define SSD1305_COLORC 2 +#define SSD1305_COLORD 3 + +/* Fundamental Commands *****************************************************/ +#define SSD1305_SETCOLL 0x00 /* 0x00-0x0f: Set lower column address */ +# define SSD1305_COLL_MASK 0x0f +#define SSD1305_SETCOLH 0x10 /* 0x10-0x1f: Set higher column address */ +# define SSD1305_COLH_MASK 0x0f +#define SSD1305_ADDRMODE 0x20 /* 0x20: Set memory address mode */ +# define SSD1305_ADDRMODE_HOR 0x00 /* Data 1: Set horizontal address mode */ +# define SSD1305_ADDRMODE_VIRT 0x01 /* Data 1: Set virtal address mode */ +# define SSD1305_ADDRMODE_PAGE 0x02 /* Data 1: Set page address mode */ +#define SSD1305_SETCOLADDR 0x21 /* 0x21: Set column address */ + /* Data 1: Column start address: 0-131 */ + /* Data 2: Column end address: 0-131 */ +#define SSD1305_SETPAGEADDR 0x22 /* 0x22: Set page address */ + /* Data 1: Page start address: 0x00-0x7d */ + /* Data 2: Page end address: 0x00-0x7d */ +#define SSD1305_SETSTARTLINE 0x40 /* 0x40-7f: Set display start line */ +# define SSD1305_STARTLINE_MASK 0x3f + +#define SSD1305_SETCONTRAST 0x81 /* 0x81: Set contrast control */ + /* Data 1: Set 1 of 256 contrast steps */ +#define SSD1305_SETBRIGHTNESS 0x82 /* 0x82: Set brightness */ + /* Data 1: Set 1 of 256 contrast steps */ +#define SSD1305_SETLUT 0x91 /* 0x01: Set lookup table */ + /* Data 1: Pulse width: 31-63 */ + /* Data 2: Color A: 31-63 */ + /* Data 3: Color B: 31-63 */ + /* Data 4: Color C: 31-63 */ +#define SSD1305_SETBANKCOLOR1 0x92 /* 0x92: Set bank 1-16 color */ +# define SSD1305_SETBANK1(c) (c) /* Data 1, Bits 0-1: Bank 1 color */ +# define SSD1305_SETBANK2(c) (c << 2) /* Data 1, Bits 2-3: Bank 2 color */ +# define SSD1305_SETBANK3(c) (c << 4) /* Data 1, Bits 4-5: Bank 3 color */ +# define SSD1305_SETBANK4(c) (c << 6) /* Data 1, Bits 6-7: Bank 4 color */ +# define SSD1305_SETBANK5(c) (c) /* Data 2, Bits 0-1: Bank 5 color */ +# define SSD1305_SETBANK6(c) (c << 2) /* Data 2, Bits 2-3: Bank 6 color */ +# define SSD1305_SETBANK7(c) (c << 4) /* Data 2, Bits 4-5: Bank 7 color */ +# define SSD1305_SETBANK8(c) (c << 6) /* Data 2, Bits 6-7: Bank 8 color */ +# define SSD1305_SETBANK9(c) (c) /* Data 3, Bits 0-1: Bank 9 color */ +# define SSD1305_SETBANK10(c) (c << 2) /* Data 3, Bits 2-3: Bank 10 color */ +# define SSD1305_SETBANK11(c) (c << 4) /* Data 3, Bits 4-5: Bank 11 color */ +# define SSD1305_SETBANK12(c) (c << 6) /* Data 3, Bits 6-7: Bank 12 color */ +# define SSD1305_SETBANK13(c) (c) /* Data 4, Bits 0-1: Bank 13 color */ +# define SSD1305_SETBANK14(c) (c << 2) /* Data 4, Bits 2-3: Bank 14 color */ +# define SSD1305_SETBANK15(c) (c << 4) /* Data 4, Bits 4-5: Bank 15 color */ +# define SSD1305_SETBANK16(c) (c << 6) /* Data 4, Bits 6-7: Bank 16 color */ +#define SSD1305_SETBANKCOLOR2 0x93 /* 0x93: Set bank 17-32 color */ +# define SSD1305_SETBANK17(c) (c) /* Data 1, Bits 0-1: Bank 17 color */ +# define SSD1305_SETBANK18(c) (c << 2) /* Data 1, Bits 2-3: Bank 18 color */ +# define SSD1305_SETBANK19(c) (c << 4) /* Data 1, Bits 4-5: Bank 19 color */ +# define SSD1305_SETBANK20(c) (c << 6) /* Data 1, Bits 6-7: Bank 20 color */ +# define SSD1305_SETBANK21(c) (c) /* Data 2, Bits 0-1: Bank 21 color */ +# define SSD1305_SETBANK22(c) (c << 2) /* Data 2, Bits 2-3: Bank 22 color */ +# define SSD1305_SETBANK23(c) (c << 4) /* Data 2, Bits 4-5: Bank 23 color */ +# define SSD1305_SETBANK24(c) (c << 6) /* Data 2, Bits 6-7: Bank 24 color */ +# define SSD1305_SETBANK25(c) (c) /* Data 3, Bits 0-1: Bank 25 color */ +# define SSD1305_SETBANK26(c) (c << 2) /* Data 3, Bits 2-3: Bank 26 color */ +# define SSD1305_SETBANK27(c) (c << 4) /* Data 3, Bits 4-5: Bank 27 color */ +# define SSD1305_SETBANK28(c) (c << 6) /* Data 3, Bits 6-7: Bank 28 color */ +# define SSD1305_SETBANK29(c) (c) /* Data 4, Bits 0-1: Bank 29 color */ +# define SSD1305_SETBANK30(c) (c << 2) /* Data 4, Bits 2-3: Bank 30 color */ +# define SSD1305_SETBANK31(c) (c << 4) /* Data 4, Bits 4-5: Bank 31 color */ +# define SSD1305_SETBANK32(c) (c << 6) /* Data 4, Bits 6-7: Bank 32 color */ +#define SSD1305_MAPCOL0 0xa0 /* 0xa0: Column address 0 is mapped to SEG0 */ +#define SSD1305_MAPCOL131 0xa1 /* 0xa1: Column address 131 is mapped to SEG0 */ +#define SSD1305_DISPRAM 0xa4 /* 0xa4: Resume to RAM content display */ +#define SSD1305_DISPENTIRE 0xa5 /* 0xa5: Entire display ON */ +#define SSD1305_DISPNORMAL 0xa6 /* 0xa6: Normal display */ +#define SSD1305_DISPINVERTED 0xa7 /* 0xa7: Inverse display */ + +#define SSD1305_SETMUX 0xa8 /* 0xa8: Set Multiplex Ratio*/ + /* Data 1: MUX ratio -1: 15-63 */ +#define SSD1305_DIMMODE 0xab /* 0xab: Dim mode setting */ + /* Data 1: Reserverd, must be zero */ + /* Data 2: Contrast for bank1: 0-255 */ + /* Data 3: Brightness for color bank: 0-255 */ +#define SSD1305_MSTRCONFIG 0xad /* 0xad: Master configuration */ +# define SSD1305_MSTRCONFIG_EXTVCC 0x8e /* Data 1: Select external Vcc */ +#define SSD1305_DISPONDIM 0xac /* 0xac: Display ON in dim mode */ +#define SSD1305_DISPOFF 0xae /* 0xae: Display OFF (sleep mode) */ +#define SSD1305_DISPON 0xaf /* 0xaf: Display ON in normal mode */ +#define SSD1305_SETPAGESTART 0xb0 /* 0xb0-b7: Set page start address */ +# define SSD1305_PAGESTART_MASK 0x07 +#define SSD1305_SETCOMNORMAL 0xc0 /* 0xc0: Set COM output, normal mode */ +#define SSD1305_SETCOMREMAPPED 0xc8 /* 0xc8: Set COM output, remapped mode */ + +#define SSD1305_SETOFFSET 0xd3 /* 0xd3: Set display offset */ + /* Data 1: Vertical shift by COM: 0-63 */ +#define SSD1305_SETDCLK 0xd5 /* 0xd5: Set display clock divide ratio/oscillator */ +# define SSD1305_DCLKDIV_SHIFT (0) /* Data 1, Bits 0-3: DCLK divide ratio/frequency*/ +# define SSD1305_DCLKDIV_MASK 0x0f +# define SSD1305_DCLKFREQ_SHIFT (4) /* Data 1, Bits 4-7: DCLK divide oscillator frequency */ +# define SSD1305_DCLKFREQ_MASK 0xf0 +#define SSD1305_SETCOLORMODE 0xd8 /* 0xd: Set area color and low power display modes */ +# define SSD1305_COLORMODE_MONO 0x00 /* Data 1, Bits 4-5: 00=monochrome */ +# define SSD1305_COLORMODE_COLOR 0x30 /* Data 1, Bits 4-5: 11=area color enable */ +# define SSD1305_POWERMODE_NORMAL 0x00 /* Data 1, Bits 0,2: 00=normal power mode */ +# define SSD1305_POWERMODE_LOW 0x05 /* Data 1, Bits 0,2: 11=low power display mode */ +#define SSD1305_SETPRECHARGE 0xd9 /* 0xd9: Set pre-charge period */ +# define SSD1305_PHASE1_SHIFT (0) /* Data 1, Bits 0-3: Phase 1 period of up to 15 DCLK clocks */ +# define SSD1305_PHASE1_MASK 0x0f +# define SSD1305_PHASE2_SHIFT (4) /* Data 1, Bits 4-7: Phase 2 period of up to 15 DCLK clocks */ +# define SSD1305_PHASE2_MASK 0xf0 +#define SSD1305_SETCOMCONFIG 0xda /* 0xda: Set COM configuration */ +# define SSD1305_COMCONFIG_SEQ 0x02 /* Data 1, Bit 4: 0=Sequential COM pin configuration */ +# define SSD1305_COMCONFIG_ALT 0x12 /* Data 1, Bit 4: 1=Alternative COM pin configuration */ +# define SSD1305_COMCONFIG_NOREMAP 0x02 /* Data 1, Bit 5: 0=Disable COM Left/Right remap */ +# define SSD1305_COMCONFIG_REMAP 0x22 /* Data 1, Bit 5: 1=Enable COM Left/Right remap */ +#define SSD1305_SETVCOMHDESEL 0xdb /* 0xdb: Set VCOMH delselect level */ +# define SSD1305_VCOMH_x4p3 0x00 /* Data 1: ~0.43 x Vcc */ +# define SSD1305_VCOMH_x7p7 0x34 /* Data 1: ~0.77 x Vcc */ +# define SSD1305_VCOMH_x8p3 0x3c /* Data 1: ~0.83 x Vcc */ +#define SSD1305_ENTER_RMWMODE 0xe0 /* 0xe0: Enter the Read Modify Write mode */ +#define SSD1305_NOP 0xe3 /* 0xe3: NOP Command for no operation */ +#define SSD1305_EXIT_RMWMODE 0xee /* 0xee: Leave the Read Modify Write mode */ + +/* Graphic Acceleration Commands ********************************************/ + +#define SSD1305_HSCROLL_RIGHT 0x26 /* 0x26: Right horizontal scroll */ +#define SSD1305_HSCROLL_LEFT 0x27 /* 0x27: Left horizontal scroll */ + /* Data 1, Bits 0-2: Column scroll offset: 0-4 */ + /* Data 2, Bits 0-2: Start page address: 0-7 */ +#define SSD1305_HSCROLL_FRAMES6 0x00 /* Data 3, Bits 0-2: Timer interval, 000=6 frames */ +#define SSD1305_HSCROLL_FRAMES32 0x01 /* Data 3, Bits 0-2: Timer interval, 001=32 frames */ +#define SSD1305_HSCROLL_FRAMES64 0x02 /* Data 3, Bits 0-2: Timer interval, 010=64 frames */ +#define SSD1305_HSCROLL_FRAMES128 0x03 /* Data 3, Bits 0-2: Timer interval, 011=128 frames */ +#define SSD1305_HSCROLL_FRAMES3 0x04 /* Data 3, Bits 0-2: Timer interval, 100=3 frames */ +#define SSD1305_HSCROLL_FRAMES4 0x05 /* Data 3, Bits 0-2: Timer interval, 101=4 frames */ +#define SSD1305_HSCROLL_FRAMES2 0x06 /* Data 3, Bits 0-2: Timer interval, 110=2 frames */ + /* Data 4, Bits 0-2: End page address: 0-7 */ + +#define SSD1305_VSCROLL_RIGHT 0x29 /* 0x26: Vertical and right horizontal scroll */ +#define SSD1305_VSCROLL_LEFT 0x2a /* 0x27: Vertical and left horizontal scroll */ + /* Data 1, Bits 0-2: Column scroll offset: 0-4 */ + /* Data 2, Bits 0-2: Start page address: 0-7 */ +#define SSD1305_VSCROLL_FRAMES6 0x00 /* Data 3, Bits 0-2: Timer interval, 000=6 frames */ +#define SSD1305_VSCROLL_FRAMES32 0x01 /* Data 3, Bits 0-2: Timer interval, 001=32 frames */ +#define SSD1305_VSCROLL_FRAMES64 0x02 /* Data 3, Bits 0-2: Timer interval, 010=64 frames */ +#define SSD1305_VSCROLL_FRAMES128 0x03 /* Data 3, Bits 0-2: Timer interval, 011=128 frames */ +#define SSD1305_VSCROLL_FRAMES3 0x04 /* Data 3, Bits 0-2: Timer interval, 100=3 frames */ +#define SSD1305_VSCROLL_FRAMES4 0x05 /* Data 3, Bits 0-2: Timer interval, 101=4 frames */ +#define SSD1305_VSCROLL_FRAMES2 0x06 /* Data 3, Bits 0-2: Timer interval, 110=2 frames */ + /* Data 4, Bits 0-2: End page address: 0-7 */ + /* Data 5, Bits 0-5: Vertical scrolling offset: 0-63 */ +#define SSD1305_SCROLL_STOP 0x2e /* 0x2e: Deactivate scroll */ +#define SSD1305_SCROLL_START 0x2f /* 0x2f: Activate scroll */ +#define SSD1305_VSCROLL_AREA 0xa3 /* 0xa3: Set vertical scroll area */ + /* Data 1: Number of rows in the top fixed area */ + /* Data 1: Number of rows in the scroll area */ + +/* Status register bit definitions ******************************************/ + +#define SSD1305_STATUS_DISPOFF (1 << 6) /* Bit 6: 1=Display off */ + +#endif /* __DRIVERS_LCD_SSD1305_H */ diff --git a/nuttx/drivers/lcd/ug-9664hswag01.c b/nuttx/drivers/lcd/ug-9664hswag01.c index bb49f20e6..e0e8e8e3a 100644 --- a/nuttx/drivers/lcd/ug-9664hswag01.c +++ b/nuttx/drivers/lcd/ug-9664hswag01.c @@ -4,7 +4,7 @@ * controller. * * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * Author: Gregory Nutt <gnutt@nuttx.org> * * Reference: "Product Specification, OEL Display Module, UG-9664HSWAG01", Univision * Technology Inc., SAS1-6020-B, January 3, 2008. diff --git a/nuttx/drivers/mmcsd/Make.defs b/nuttx/drivers/mmcsd/Make.defs index 48e5d4fb6..850456597 100644 --- a/nuttx/drivers/mmcsd/Make.defs +++ b/nuttx/drivers/mmcsd/Make.defs @@ -2,7 +2,7 @@ # drivers/mmcsd/Make.defs # # Copyright (C) 2008, 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <spudmonkey@racsa.co.cr> +# Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions diff --git a/nuttx/drivers/mmcsd/mmcsd_csd.h b/nuttx/drivers/mmcsd/mmcsd_csd.h index e35eacad5..d5343aa84 100644 --- a/nuttx/drivers/mmcsd/mmcsd_csd.h +++ b/nuttx/drivers/mmcsd/mmcsd_csd.h @@ -2,7 +2,7 @@ * drivers/mmcsd/mmcsd_csd.h * * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions diff --git a/nuttx/drivers/mmcsd/mmcsd_debug.c b/nuttx/drivers/mmcsd/mmcsd_debug.c index 03872f5cf..0bd7f896e 100644 --- a/nuttx/drivers/mmcsd/mmcsd_debug.c +++ b/nuttx/drivers/mmcsd/mmcsd_debug.c @@ -2,7 +2,7 @@ * drivers/mmcsd/mmcsd_debug.c * * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions diff --git a/nuttx/drivers/mmcsd/mmcsd_internal.h b/nuttx/drivers/mmcsd/mmcsd_internal.h index 577ebbba9..ed669cdfa 100644 --- a/nuttx/drivers/mmcsd/mmcsd_internal.h +++ b/nuttx/drivers/mmcsd/mmcsd_internal.h @@ -2,7 +2,7 @@ * drivers/mmcsd/mmcsd_internal.h * * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions diff --git a/nuttx/drivers/mmcsd/mmcsd_sdio.h b/nuttx/drivers/mmcsd/mmcsd_sdio.h index 75c97bd65..9e3794e25 100644 --- a/nuttx/drivers/mmcsd/mmcsd_sdio.h +++ b/nuttx/drivers/mmcsd/mmcsd_sdio.h @@ -1,339 +1,339 @@ -/********************************************************************************************
- * drivers/mmcsd/mmcsd_sdio.h
- *
- * Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved.
- * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- * used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ********************************************************************************************/
-
-#ifndef __DRIVERS_MMCSD_MMCSD_SDIO_H
-#define __DRIVERS_MMCSD_MMCSD_SDIO_H
-
-/********************************************************************************************
- * Included Files
- ********************************************************************************************/
-
-#include <nuttx/config.h>
-#include <stdint.h>
-
-/********************************************************************************************
- * Pre-Processor Definitions
- ********************************************************************************************/
-
-/* CMD8 Argument:
- * [31:12]: Reserved (shall be set to '0')
- * [11:8]: Supply Voltage (VHS) 0x1 (Range: 2.7-3.6 V)
- * [7:0]: Check Pattern (recommended 0xaa)
- * CMD8 Response: R7
- */
-
-#define MMCSD_CMD8VOLTAGE_SHIFT (8) /* Bits 8-11: Supply voltage */
-#define MMCSD_CMD8VOLTAGE_MASK ((uint32_t)0x0f << MMCSD_CMD8VOLTAGE_SHIFT)
-# define MMCSD_CMD8VOLTAGE_27 ((uint32_t)0x01 << MMCSD_CMD8VOLTAGE_SHIFT) /* 2.7-3.6V */
-#define MMCSD_CMD8ECHO_SHIFT (0) /* Bits 0-7: Check pattern */
-#define MMCSD_CMD8ECHO_MASK ((uint32_t)0xff << MMCSD_CMD8ECHO_SHIFT)
-# define MMCSD_CMD8CHECKPATTERN ((uint32_t)0xaa << MMCSD_CMD8ECHO_SHIFT)
-
-/* ACMD6 argument */
-
-#define MMCSD_ACMD6_BUSWIDTH_1 ((uint32_t)0) /* Bus width = 1-bit */
-#define MMCSD_ACMD6_BUSWIDTH_4 ((uint32_t)2) /* Bus width = 4-bit */
-
-/* ACMD41 argument */
-
-#define MMCSD_ACMD41_VOLTAGEWINDOW ((uint32_t)0x80100000)
-#define MMCSD_ACMD41_HIGHCAPACITY ((uint32_t)1 << 30)
-#define MMCSD_ACMD41_STDCAPACITY ((uint32_t)0)
-
-/* ACMD42 argument */
-
-#define MMCSD_ACMD42_CD_DISCONNECT ((uint32_t)0) /* Disconnect card detection logic */
-#define MMCSD_ACMD42_CD_CONNECT ((uint32_t)1) /* Connect card detection logic */
-
-/* R1 Card Status bit definitions */
-
-#define MMCSD_R1_OUTOFRANGE ((uint32_t)1 << 31) /* Bad argument */
-#define MMCSD_R1_ADDRESSERROR ((uint32_t)1 << 30) /* Bad address */
-#define MMCSD_R1_BLOCKLENERROR ((uint32_t)1 << 29) /* Bad block length */
-#define MMCSD_R1_ERASESEQERROR ((uint32_t)1 << 28) /* Erase cmd error */
-#define MMCSD_R1_ERASEPARAM ((uint32_t)1 << 27) /* Bad write blocks */
-#define MMCSD_R1_WPVIOLATION ((uint32_t)1 << 26) /* Erase access failure */
-#define MMCSD_R1_CARDISLOCKED ((uint32_t)1 << 25) /* Card is locked */
-#define MMCSD_R1_LOCKUNLOCKFAILED ((uint32_t)1 << 24) /* Password error */
-#define MMCSD_R1_COMCRCERROR ((uint32_t)1 << 23) /* CRC error */
-#define MMCSD_R1_ILLEGALCOMMAND ((uint32_t)1 << 22) /* Bad command */
-#define MMCSD_R1_CARDECCFAILED ((uint32_t)1 << 21) /* Failed to correct data */
-#define MMCSD_R1_CCERROR ((uint32_t)1 << 20) /* Card controller error */
-#define MMCSD_R1_ERROR ((uint32_t)1 << 19) /* General error */
-#define MMCSD_R1_UNDERRUN ((uint32_t)1 << 18) /* Underrun (MMC only) */
-#define MMCSD_R1_OVERRRUN ((uint32_t)1 << 17) /* Overrun (MMC only) */
-#define MMCSD_R1_CIDCSDOVERWRITE ((uint32_t)1 << 16) /* CID/CSD error */
-#define MMCSD_R1_WPERASESKIP ((uint32_t)1 << 15) /* Not all erased */
-#define MMCSD_R1_CARDECCDISABLED ((uint32_t)1 << 14) /* Internal ECC not used */
-#define MMCSD_R1_ERASERESET ((uint32_t)1 << 13) /* Reset sequence cleared */
-#define MMCSD_R1_STATE_SHIFT (9) /* Current card state */
-#define MMCSD_R1_STATE_MASK ((uint32_t)15 << MMCSD_R1_STATE_SHIFT)
- /* Card identification mode states */
-# define MMCSD_R1_STATE_IDLE ((uint32_t)0 << MMCSD_R1_STATE_SHIFT) /* 0=Idle state */
-# define MMCSD_R1_STATE_READY ((uint32_t)1 << MMCSD_R1_STATE_SHIFT) /* 1=Ready state */
-# define MMCSD_R1_STATE_IDENT ((uint32_t)2 << MMCSD_R1_STATE_SHIFT) /* 2=Identification state */
- /* Data transfer states */
-# define MMCSD_R1_STATE_STBY ((uint32_t)3 << MMCSD_R1_STATE_SHIFT) /* 3=Standby state */
-# define MMCSD_R1_STATE_TRAN ((uint32_t)4 << MMCSD_R1_STATE_SHIFT) /* 4=Transfer state */
-# define MMCSD_R1_STATE_DATA ((uint32_t)5 << MMCSD_R1_STATE_SHIFT) /* 5=Sending data state */
-# define MMCSD_R1_STATE_RCV ((uint32_t)6 << MMCSD_R1_STATE_SHIFT) /* 6=Receiving data state */
-# define MMCSD_R1_STATE_PRG ((uint32_t)7 << MMCSD_R1_STATE_SHIFT) /* 7=Programming state */
-# define MMCSD_R1_STATE_DIS ((uint32_t)8 << MMCSD_R1_STATE_SHIFT) /* 8=Disconnect state */
-#define MMCSD_R1_READYFORDATA ((uint32_t)1 << 8) /* Buffer empty */
-#define MMCSD_R1_APPCMD ((uint32_t)1 << 5) /* Next CMD is ACMD */
-#define MMCSD_R1_AKESEQERROR ((uint32_t)1 << 3) /* Authentication error */
-#define MMCSD_R1_ERRORMASK ((uint32_t)0xfdffe008) /* Error mask */
-
-#define IS_STATE(v,s) ((((uint32_t)v)&MMCSD_R1_STATE_MASK)==(s))
-
-/* R3 (OCR) */
-
-#define MMC_VDD_20_36 ((uint32_t)0x00ffff00) /* VDD voltage 2.0-3.6 */
-
-#define MMCSD_VDD_145_150 ((uint32_t)1 << 0) /* VDD voltage 1.45 - 1.50 */
-#define MMCSD_VDD_150_155 ((uint32_t)1 << 1) /* VDD voltage 1.50 - 1.55 */
-#define MMCSD_VDD_155_160 ((uint32_t)1 << 2) /* VDD voltage 1.55 - 1.60 */
-#define MMCSD_VDD_160_165 ((uint32_t)1 << 3) /* VDD voltage 1.60 - 1.65 */
-#define MMCSD_VDD_165_170 ((uint32_t)1 << 4) /* VDD voltage 1.65 - 1.70 */
-#define MMCSD_VDD_17_18 ((uint32_t)1 << 5) /* VDD voltage 1.7 - 1.8 */
-#define MMCSD_VDD_18_19 ((uint32_t)1 << 6) /* VDD voltage 1.8 - 1.9 */
-#define MMCSD_VDD_19_20 ((uint32_t)1 << 7) /* VDD voltage 1.9 - 2.0 */
-#define MMCSD_VDD_20_21 ((uint32_t)1 << 8) /* VDD voltage 2.0-2.1 */
-#define MMCSD_VDD_21_22 ((uint32_t)1 << 9) /* VDD voltage 2.1-2.2 */
-#define MMCSD_VDD_22_23 ((uint32_t)1 << 10) /* VDD voltage 2.2-2.3 */
-#define MMCSD_VDD_23_24 ((uint32_t)1 << 11) /* VDD voltage 2.3-2.4 */
-#define MMCSD_VDD_24_25 ((uint32_t)1 << 12) /* VDD voltage 2.4-2.5 */
-#define MMCSD_VDD_25_26 ((uint32_t)1 << 13) /* VDD voltage 2.5-2.6 */
-#define MMCSD_VDD_26_27 ((uint32_t)1 << 14) /* VDD voltage 2.6-2.7 */
-#define MMCSD_VDD_27_28 ((uint32_t)1 << 15) /* VDD voltage 2.7-2.8 */
-#define MMCSD_VDD_28_29 ((uint32_t)1 << 16) /* VDD voltage 2.8-2.9 */
-#define MMCSD_VDD_29_30 ((uint32_t)1 << 17) /* VDD voltage 2.9-3.0 */
-#define MMCSD_VDD_30_31 ((uint32_t)1 << 18) /* VDD voltage 3.0-3.1 */
-#define MMCSD_VDD_31_32 ((uint32_t)1 << 19) /* VDD voltage 3.1-3.2 */
-#define MMCSD_VDD_32_33 ((uint32_t)1 << 20) /* VDD voltage 3.2-3.3 */
-#define MMCSD_VDD_33_34 ((uint32_t)1 << 21) /* VDD voltage 3.3-3.4 */
-#define MMCSD_VDD_34_35 ((uint32_t)1 << 22) /* VDD voltage 3.4-3.5 */
-#define MMCSD_VDD_35_36 ((uint32_t)1 << 23) /* VDD voltage 3.5-3.6 */
-#define MMCSD_R3_HIGHCAPACITY ((uint32_t)1 << 30) /* true: Card supports block addressing */
-#define MMCSD_CARD_BUSY ((uint32_t)1 << 31) /* Card power-up busy bit */
-
-/* R6 Card Status bit definitions */
-
-#define MMCSD_R6_RCA_SHIFT (16) /* New published RCA */
-#define MMCSD_R6_RCA_MASK ((uint32_t)0xffff << MMCSD_R6_RCA_SHIFT)
-#define MMCSD_R6_COMCRCERROR ((uint32_t)1 << 15) /* CRC error */
-#define MMCSD_R6_ILLEGALCOMMAND ((uint32_t)1 << 14) /* Bad command */
-#define MMCSD_R6_ERROR ((uint32_t)1 << 13) /* General error */
-#define MMCSD_R6_STATE_SHIFT (9) /* Current card state */
-#define MMCSD_R6_STATE_MASK ((uint32_t)15 << MMCSD_R6_STATE_SHIFT)
- /* Card identification mode states */
-# define MMCSD_R6_STATE_IDLE ((uint32_t)0 << MMCSD_R6_STATE_SHIFT) /* 0=Idle state */
-# define MMCSD_R6_STATE_READY ((uint32_t)1 << MMCSD_R6_STATE_SHIFT) /* 1=Ready state */
-# define MMCSD_R6_STATE_IDENT ((uint32_t)2 << MMCSD_R6_STATE_SHIFT) /* 2=Identification state */
- /* Data transfer states */
-# define MMCSD_R6_STATE_STBY ((uint32_t)3 << MMCSD_R6_STATE_SHIFT) /* 3=Standby state */
-# define MMCSD_R6_STATE_TRAN ((uint32_t)4 << MMCSD_R6_STATE_SHIFT) /* 4=Transfer state */
-# define MMCSD_R6_STATE_DATA (5(uint32_t) << MMCSD_R6_STATE_SHIFT) /* 5=Sending data state */
-# define MMCSD_R6_STATE_RCV ((uint32_t)6 << MMCSD_R6_STATE_SHIFT) /* 6=Receiving data state */
-# define MMCSD_R6_STATE_PRG ((uint32_t)7 << MMCSD_R6_STATE_SHIFT) /* 7=Programming state */
-# define MMCSD_R6_STATE_DIS ((uint32_t) << MMCSD_R6_STATE_SHIFT) /* 8=Disconnect state */
-#define MMCSD_R6_ERRORMASK ((uint32_t)0x0000e000) /* Error mask */
-
-/* SD Configuration Register (SCR) encoding */
-
-#define MMCSD_SCR_BUSWIDTH_1BIT (1)
-#define MMCSD_SCR_BUSWIDTH_2BIT (2)
-#define MMCSD_SCR_BUSWIDTH_4BIT (4)
-#define MMCSD_SCR_BUSWIDTH_8BIT (8)
-
-/* Last 4 bytes of the 48-bit R7 response */
-
-#define MMCSD_R7VERSION_SHIFT (28) /* Bits 28-31: Command version number */
-#define MMCSD_R7VERSION_MASK ((uint32_t)0x0f << MMCSD_R7VERSION_SHIFT)
-#define MMCSD_R7VOLTAGE_SHIFT (8) /* Bits 8-11: Voltage accepted */
-#define MMCSD_R7VOLTAGE_MASK ((uint32_t)0x0f << MMCSD_R7VOLTAGE_SHIFT)
-# define MMCSD_R7VOLTAGE_27 ((uint32_t)0x01 << MMCSD_R7VOLTAGE_SHIFT) /* 2.7-3.6V */
-#define MMCSD_R7ECHO_SHIFT (0) /* Bits 0-7: Echoed check pattern */
-#define MMCSD_R7ECHO_MASK ((uint32_t)0xff << MMCSD_R7ECHO_SHIFT)
-# define MMCSD_R7CHECKPATTERN ((uint32_t)0xaa << MMCSD_R7ECHO_SHIFT)
-
-/********************************************************************************************
- * Public Types
- ********************************************************************************************/
-
-/* Decoded Card Identification (CID) register */
-
-struct mmcsd_cid_s
-{
- uint8_t mid; /* 127:120 8-bit Manufacturer ID */
- uint16_t oid; /* 119:104 16-bit OEM/Application ID (ascii) */
- uint8_t pnm[6]; /* 103:64 40-bit Product Name (ascii) + null terminator */
- uint8_t prv; /* 63:56 8-bit Product revision */
- uint32_t psn; /* 55:24 32-bit Product serial number */
- /* 23:20 4-bit (reserved) */
- uint16_t mdt; /* 19:8 12-bit Manufacturing date */
- uint8_t crc; /* 7:1 7-bit CRC7 */
- /* 0:0 1-bit (not used) */
-};
-
-/* Decoded Card Specific Data (CSD) register */
-
-struct mmcsd_csd_s
-{
- uint8_t csdstructure; /* 127:126 CSD structure */
- uint8_t mmcspecvers; /* 125:122 MMC Spec version (MMC only) */
-
- struct
- {
- uint8_t timeunit; /* 2:0 Time exponent */
- uint8_t timevalue; /* 6:3 Time mantissa */
- } taac; /* 119:112 Data read access-time-1 */
-
- uint8_t nsac; /* 111:104 Data read access-time-2 in CLK cycle(NSAC*100) */
-
- struct
- {
- uint8_t transferrateunit; /* 2:0 Rate exponent */
- uint8_t timevalue; /* 6:3 Rate mantissa */
- } transpeed; /* 103:96 Max. data transfer rate */
-
- uint16_t ccc; /* 95:84 Card command classes */
- uint8_t readbllen; /* 83:80 Max. read data block length */
- uint8_t readblpartial; /* 79:79 Partial blocks for read allowed */
- uint8_t writeblkmisalign; /* 78:78 Write block misalignment */
- uint8_t readblkmisalign; /* 77:77 Read block misalignment */
- uint8_t dsrimp; /* 76:76 DSR implemented */
-
- union
- {
-#ifdef CONFIG_MMCSD_MMCSUPPORT
- struct
- {
- uint16_t csize; /* 73:62 Device size */
- uint8_t vddrcurrmin; /* 61:59 Max. read current at Vdd min */
- uint8_t vddrcurrmax; /* 58:56 Max. read current at Vdd max */
- uint8_t vddwcurrmin; /* 55:53 Max. write current at Vdd min */
- uint8_t vddwcurrmax; /* 52:50 Max. write current at Vdd max */
- uint8_t csizemult; /* 49:47 Device size multiplier */
-
- union
- {
- struct /* MMC system specification version 3.1 */
- {
- uint8_t ergrpsize; /* 46:42 Erase group size (MMC 3.1) */
- uint8_t ergrpmult; /* 41:37 Erase group multiplier (MMC 3.1) */
- } mmc31;
- struct /* MMC system specification version 2.2 */
- {
- uint8_t sectorsize; /* 46:42 Erase sector size (MMC 2.2) */
- uint8_t ergrpsize; /* 41:37 Erase group size (MMC 2.2) */
- } mmc22;
- } er;
-
- uint8_t mmcwpgrpsize; /* 36:32 Write protect group size (MMC) */
- } mmc;
-#endif
- struct
- {
- uint16_t csize; /* 73:62 Device size */
- uint8_t vddrcurrmin; /* 61:59 Max. read current at Vdd min */
- uint8_t vddrcurrmax; /* 58:56 Max. read current at Vdd max */
- uint8_t vddwcurrmin; /* 55:53 Max. write current at Vdd min */
- uint8_t vddwcurrmax; /* 52:50 Max. write current at Vdd max */
- uint8_t csizemult; /* 49:47 Device size multiplier */
- uint8_t sderblen; /* 46:46 Erase single block enable (SD) */
- uint8_t sdsectorsize; /* 45:39 Erase sector size (SD) */
- uint8_t sdwpgrpsize; /* 38:32 Write protect group size (SD) */
- } sdbyte;
-
- struct
- {
- /* 73:70 (reserved) */
- uint32_t csize; /* 69:48 Device size */
- /* 47:47 (reserved) */
- uint8_t sderblen; /* 46:46 Erase single block enable (SD) */
- uint8_t sdsectorsize; /* 45:39 Erase sector size (SD) */
- uint8_t sdwpgrpsize; /* 38:32 Write protect group size (SD) */
- } sdblock;
- } u;
-
- uint8_t wpgrpen; /* 31:31 Write protect group enable */
- uint8_t mmcdfltecc; /* 30:29 Manufacturer default ECC (MMC) */
- uint8_t r2wfactor; /* 28:26 Write speed factor */
- uint8_t writebllen; /* 25:22 Max. write data block length */
- uint8_t writeblpartial; /* 21:21 Partial blocks for write allowed */
- uint8_t fileformatgrp; /* 15:15 File format group */
- uint8_t copy; /* 14:14 Copy flag (OTP) */
- uint8_t permwriteprotect; /* 13:13 Permanent write protection */
- uint8_t tmpwriteprotect; /* 12:12 Temporary write protection */
- uint8_t fileformat; /* 10:11 File format */
- uint8_t mmcecc; /* 9:8 ECC (MMC) */
- uint8_t crc; /* 7:1 CRC */
- /* 0:0 Not used */
-};
-
-struct mmcsd_scr_s
-{
- uint8_t scrversion; /* 63:60 Version of SCR structure */
- uint8_t sdversion; /* 59:56 SD memory card physical layer version */
- uint8_t erasestate; /* 55:55 Data state after erase (1 or 0) */
- uint8_t security; /* 54:52 SD security support */
- uint8_t buswidth; /* 51:48 DAT bus widthes supported */
- /* 47:32 SD reserved space */
- uint32_t mfgdata; /* 31:0 Reserved for manufacturing data */
-};
-
-/********************************************************************************************
- * Public Data
- ********************************************************************************************/
-
-#undef EXTERN
-#if defined(__cplusplus)
-#define EXTERN extern "C"
-extern "C" {
-#else
-#define EXTERN extern
-#endif
-
-/********************************************************************************************
- * Public Functions
- ********************************************************************************************/
-
-
-#undef EXTERN
-#if defined(__cplusplus)
-}
-#endif
-#endif /* __DRIVERS_MMCSD_MMCSD_SDIO_H */
+/******************************************************************************************** + * drivers/mmcsd/mmcsd_sdio.h + * + * Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ********************************************************************************************/ + +#ifndef __DRIVERS_MMCSD_MMCSD_SDIO_H +#define __DRIVERS_MMCSD_MMCSD_SDIO_H + +/******************************************************************************************** + * Included Files + ********************************************************************************************/ + +#include <nuttx/config.h> +#include <stdint.h> + +/******************************************************************************************** + * Pre-Processor Definitions + ********************************************************************************************/ + +/* CMD8 Argument: + * [31:12]: Reserved (shall be set to '0') + * [11:8]: Supply Voltage (VHS) 0x1 (Range: 2.7-3.6 V) + * [7:0]: Check Pattern (recommended 0xaa) + * CMD8 Response: R7 + */ + +#define MMCSD_CMD8VOLTAGE_SHIFT (8) /* Bits 8-11: Supply voltage */ +#define MMCSD_CMD8VOLTAGE_MASK ((uint32_t)0x0f << MMCSD_CMD8VOLTAGE_SHIFT) +# define MMCSD_CMD8VOLTAGE_27 ((uint32_t)0x01 << MMCSD_CMD8VOLTAGE_SHIFT) /* 2.7-3.6V */ +#define MMCSD_CMD8ECHO_SHIFT (0) /* Bits 0-7: Check pattern */ +#define MMCSD_CMD8ECHO_MASK ((uint32_t)0xff << MMCSD_CMD8ECHO_SHIFT) +# define MMCSD_CMD8CHECKPATTERN ((uint32_t)0xaa << MMCSD_CMD8ECHO_SHIFT) + +/* ACMD6 argument */ + +#define MMCSD_ACMD6_BUSWIDTH_1 ((uint32_t)0) /* Bus width = 1-bit */ +#define MMCSD_ACMD6_BUSWIDTH_4 ((uint32_t)2) /* Bus width = 4-bit */ + +/* ACMD41 argument */ + +#define MMCSD_ACMD41_VOLTAGEWINDOW ((uint32_t)0x80100000) +#define MMCSD_ACMD41_HIGHCAPACITY ((uint32_t)1 << 30) +#define MMCSD_ACMD41_STDCAPACITY ((uint32_t)0) + +/* ACMD42 argument */ + +#define MMCSD_ACMD42_CD_DISCONNECT ((uint32_t)0) /* Disconnect card detection logic */ +#define MMCSD_ACMD42_CD_CONNECT ((uint32_t)1) /* Connect card detection logic */ + +/* R1 Card Status bit definitions */ + +#define MMCSD_R1_OUTOFRANGE ((uint32_t)1 << 31) /* Bad argument */ +#define MMCSD_R1_ADDRESSERROR ((uint32_t)1 << 30) /* Bad address */ +#define MMCSD_R1_BLOCKLENERROR ((uint32_t)1 << 29) /* Bad block length */ +#define MMCSD_R1_ERASESEQERROR ((uint32_t)1 << 28) /* Erase cmd error */ +#define MMCSD_R1_ERASEPARAM ((uint32_t)1 << 27) /* Bad write blocks */ +#define MMCSD_R1_WPVIOLATION ((uint32_t)1 << 26) /* Erase access failure */ +#define MMCSD_R1_CARDISLOCKED ((uint32_t)1 << 25) /* Card is locked */ +#define MMCSD_R1_LOCKUNLOCKFAILED ((uint32_t)1 << 24) /* Password error */ +#define MMCSD_R1_COMCRCERROR ((uint32_t)1 << 23) /* CRC error */ +#define MMCSD_R1_ILLEGALCOMMAND ((uint32_t)1 << 22) /* Bad command */ +#define MMCSD_R1_CARDECCFAILED ((uint32_t)1 << 21) /* Failed to correct data */ +#define MMCSD_R1_CCERROR ((uint32_t)1 << 20) /* Card controller error */ +#define MMCSD_R1_ERROR ((uint32_t)1 << 19) /* General error */ +#define MMCSD_R1_UNDERRUN ((uint32_t)1 << 18) /* Underrun (MMC only) */ +#define MMCSD_R1_OVERRRUN ((uint32_t)1 << 17) /* Overrun (MMC only) */ +#define MMCSD_R1_CIDCSDOVERWRITE ((uint32_t)1 << 16) /* CID/CSD error */ +#define MMCSD_R1_WPERASESKIP ((uint32_t)1 << 15) /* Not all erased */ +#define MMCSD_R1_CARDECCDISABLED ((uint32_t)1 << 14) /* Internal ECC not used */ +#define MMCSD_R1_ERASERESET ((uint32_t)1 << 13) /* Reset sequence cleared */ +#define MMCSD_R1_STATE_SHIFT (9) /* Current card state */ +#define MMCSD_R1_STATE_MASK ((uint32_t)15 << MMCSD_R1_STATE_SHIFT) + /* Card identification mode states */ +# define MMCSD_R1_STATE_IDLE ((uint32_t)0 << MMCSD_R1_STATE_SHIFT) /* 0=Idle state */ +# define MMCSD_R1_STATE_READY ((uint32_t)1 << MMCSD_R1_STATE_SHIFT) /* 1=Ready state */ +# define MMCSD_R1_STATE_IDENT ((uint32_t)2 << MMCSD_R1_STATE_SHIFT) /* 2=Identification state */ + /* Data transfer states */ +# define MMCSD_R1_STATE_STBY ((uint32_t)3 << MMCSD_R1_STATE_SHIFT) /* 3=Standby state */ +# define MMCSD_R1_STATE_TRAN ((uint32_t)4 << MMCSD_R1_STATE_SHIFT) /* 4=Transfer state */ +# define MMCSD_R1_STATE_DATA ((uint32_t)5 << MMCSD_R1_STATE_SHIFT) /* 5=Sending data state */ +# define MMCSD_R1_STATE_RCV ((uint32_t)6 << MMCSD_R1_STATE_SHIFT) /* 6=Receiving data state */ +# define MMCSD_R1_STATE_PRG ((uint32_t)7 << MMCSD_R1_STATE_SHIFT) /* 7=Programming state */ +# define MMCSD_R1_STATE_DIS ((uint32_t)8 << MMCSD_R1_STATE_SHIFT) /* 8=Disconnect state */ +#define MMCSD_R1_READYFORDATA ((uint32_t)1 << 8) /* Buffer empty */ +#define MMCSD_R1_APPCMD ((uint32_t)1 << 5) /* Next CMD is ACMD */ +#define MMCSD_R1_AKESEQERROR ((uint32_t)1 << 3) /* Authentication error */ +#define MMCSD_R1_ERRORMASK ((uint32_t)0xfdffe008) /* Error mask */ + +#define IS_STATE(v,s) ((((uint32_t)v)&MMCSD_R1_STATE_MASK)==(s)) + +/* R3 (OCR) */ + +#define MMC_VDD_20_36 ((uint32_t)0x00ffff00) /* VDD voltage 2.0-3.6 */ + +#define MMCSD_VDD_145_150 ((uint32_t)1 << 0) /* VDD voltage 1.45 - 1.50 */ +#define MMCSD_VDD_150_155 ((uint32_t)1 << 1) /* VDD voltage 1.50 - 1.55 */ +#define MMCSD_VDD_155_160 ((uint32_t)1 << 2) /* VDD voltage 1.55 - 1.60 */ +#define MMCSD_VDD_160_165 ((uint32_t)1 << 3) /* VDD voltage 1.60 - 1.65 */ +#define MMCSD_VDD_165_170 ((uint32_t)1 << 4) /* VDD voltage 1.65 - 1.70 */ +#define MMCSD_VDD_17_18 ((uint32_t)1 << 5) /* VDD voltage 1.7 - 1.8 */ +#define MMCSD_VDD_18_19 ((uint32_t)1 << 6) /* VDD voltage 1.8 - 1.9 */ +#define MMCSD_VDD_19_20 ((uint32_t)1 << 7) /* VDD voltage 1.9 - 2.0 */ +#define MMCSD_VDD_20_21 ((uint32_t)1 << 8) /* VDD voltage 2.0-2.1 */ +#define MMCSD_VDD_21_22 ((uint32_t)1 << 9) /* VDD voltage 2.1-2.2 */ +#define MMCSD_VDD_22_23 ((uint32_t)1 << 10) /* VDD voltage 2.2-2.3 */ +#define MMCSD_VDD_23_24 ((uint32_t)1 << 11) /* VDD voltage 2.3-2.4 */ +#define MMCSD_VDD_24_25 ((uint32_t)1 << 12) /* VDD voltage 2.4-2.5 */ +#define MMCSD_VDD_25_26 ((uint32_t)1 << 13) /* VDD voltage 2.5-2.6 */ +#define MMCSD_VDD_26_27 ((uint32_t)1 << 14) /* VDD voltage 2.6-2.7 */ +#define MMCSD_VDD_27_28 ((uint32_t)1 << 15) /* VDD voltage 2.7-2.8 */ +#define MMCSD_VDD_28_29 ((uint32_t)1 << 16) /* VDD voltage 2.8-2.9 */ +#define MMCSD_VDD_29_30 ((uint32_t)1 << 17) /* VDD voltage 2.9-3.0 */ +#define MMCSD_VDD_30_31 ((uint32_t)1 << 18) /* VDD voltage 3.0-3.1 */ +#define MMCSD_VDD_31_32 ((uint32_t)1 << 19) /* VDD voltage 3.1-3.2 */ +#define MMCSD_VDD_32_33 ((uint32_t)1 << 20) /* VDD voltage 3.2-3.3 */ +#define MMCSD_VDD_33_34 ((uint32_t)1 << 21) /* VDD voltage 3.3-3.4 */ +#define MMCSD_VDD_34_35 ((uint32_t)1 << 22) /* VDD voltage 3.4-3.5 */ +#define MMCSD_VDD_35_36 ((uint32_t)1 << 23) /* VDD voltage 3.5-3.6 */ +#define MMCSD_R3_HIGHCAPACITY ((uint32_t)1 << 30) /* true: Card supports block addressing */ +#define MMCSD_CARD_BUSY ((uint32_t)1 << 31) /* Card power-up busy bit */ + +/* R6 Card Status bit definitions */ + +#define MMCSD_R6_RCA_SHIFT (16) /* New published RCA */ +#define MMCSD_R6_RCA_MASK ((uint32_t)0xffff << MMCSD_R6_RCA_SHIFT) +#define MMCSD_R6_COMCRCERROR ((uint32_t)1 << 15) /* CRC error */ +#define MMCSD_R6_ILLEGALCOMMAND ((uint32_t)1 << 14) /* Bad command */ +#define MMCSD_R6_ERROR ((uint32_t)1 << 13) /* General error */ +#define MMCSD_R6_STATE_SHIFT (9) /* Current card state */ +#define MMCSD_R6_STATE_MASK ((uint32_t)15 << MMCSD_R6_STATE_SHIFT) + /* Card identification mode states */ +# define MMCSD_R6_STATE_IDLE ((uint32_t)0 << MMCSD_R6_STATE_SHIFT) /* 0=Idle state */ +# define MMCSD_R6_STATE_READY ((uint32_t)1 << MMCSD_R6_STATE_SHIFT) /* 1=Ready state */ +# define MMCSD_R6_STATE_IDENT ((uint32_t)2 << MMCSD_R6_STATE_SHIFT) /* 2=Identification state */ + /* Data transfer states */ +# define MMCSD_R6_STATE_STBY ((uint32_t)3 << MMCSD_R6_STATE_SHIFT) /* 3=Standby state */ +# define MMCSD_R6_STATE_TRAN ((uint32_t)4 << MMCSD_R6_STATE_SHIFT) /* 4=Transfer state */ +# define MMCSD_R6_STATE_DATA (5(uint32_t) << MMCSD_R6_STATE_SHIFT) /* 5=Sending data state */ +# define MMCSD_R6_STATE_RCV ((uint32_t)6 << MMCSD_R6_STATE_SHIFT) /* 6=Receiving data state */ +# define MMCSD_R6_STATE_PRG ((uint32_t)7 << MMCSD_R6_STATE_SHIFT) /* 7=Programming state */ +# define MMCSD_R6_STATE_DIS ((uint32_t) << MMCSD_R6_STATE_SHIFT) /* 8=Disconnect state */ +#define MMCSD_R6_ERRORMASK ((uint32_t)0x0000e000) /* Error mask */ + +/* SD Configuration Register (SCR) encoding */ + +#define MMCSD_SCR_BUSWIDTH_1BIT (1) +#define MMCSD_SCR_BUSWIDTH_2BIT (2) +#define MMCSD_SCR_BUSWIDTH_4BIT (4) +#define MMCSD_SCR_BUSWIDTH_8BIT (8) + +/* Last 4 bytes of the 48-bit R7 response */ + +#define MMCSD_R7VERSION_SHIFT (28) /* Bits 28-31: Command version number */ +#define MMCSD_R7VERSION_MASK ((uint32_t)0x0f << MMCSD_R7VERSION_SHIFT) +#define MMCSD_R7VOLTAGE_SHIFT (8) /* Bits 8-11: Voltage accepted */ +#define MMCSD_R7VOLTAGE_MASK ((uint32_t)0x0f << MMCSD_R7VOLTAGE_SHIFT) +# define MMCSD_R7VOLTAGE_27 ((uint32_t)0x01 << MMCSD_R7VOLTAGE_SHIFT) /* 2.7-3.6V */ +#define MMCSD_R7ECHO_SHIFT (0) /* Bits 0-7: Echoed check pattern */ +#define MMCSD_R7ECHO_MASK ((uint32_t)0xff << MMCSD_R7ECHO_SHIFT) +# define MMCSD_R7CHECKPATTERN ((uint32_t)0xaa << MMCSD_R7ECHO_SHIFT) + +/******************************************************************************************** + * Public Types + ********************************************************************************************/ + +/* Decoded Card Identification (CID) register */ + +struct mmcsd_cid_s +{ + uint8_t mid; /* 127:120 8-bit Manufacturer ID */ + uint16_t oid; /* 119:104 16-bit OEM/Application ID (ascii) */ + uint8_t pnm[6]; /* 103:64 40-bit Product Name (ascii) + null terminator */ + uint8_t prv; /* 63:56 8-bit Product revision */ + uint32_t psn; /* 55:24 32-bit Product serial number */ + /* 23:20 4-bit (reserved) */ + uint16_t mdt; /* 19:8 12-bit Manufacturing date */ + uint8_t crc; /* 7:1 7-bit CRC7 */ + /* 0:0 1-bit (not used) */ +}; + +/* Decoded Card Specific Data (CSD) register */ + +struct mmcsd_csd_s +{ + uint8_t csdstructure; /* 127:126 CSD structure */ + uint8_t mmcspecvers; /* 125:122 MMC Spec version (MMC only) */ + + struct + { + uint8_t timeunit; /* 2:0 Time exponent */ + uint8_t timevalue; /* 6:3 Time mantissa */ + } taac; /* 119:112 Data read access-time-1 */ + + uint8_t nsac; /* 111:104 Data read access-time-2 in CLK cycle(NSAC*100) */ + + struct + { + uint8_t transferrateunit; /* 2:0 Rate exponent */ + uint8_t timevalue; /* 6:3 Rate mantissa */ + } transpeed; /* 103:96 Max. data transfer rate */ + + uint16_t ccc; /* 95:84 Card command classes */ + uint8_t readbllen; /* 83:80 Max. read data block length */ + uint8_t readblpartial; /* 79:79 Partial blocks for read allowed */ + uint8_t writeblkmisalign; /* 78:78 Write block misalignment */ + uint8_t readblkmisalign; /* 77:77 Read block misalignment */ + uint8_t dsrimp; /* 76:76 DSR implemented */ + + union + { +#ifdef CONFIG_MMCSD_MMCSUPPORT + struct + { + uint16_t csize; /* 73:62 Device size */ + uint8_t vddrcurrmin; /* 61:59 Max. read current at Vdd min */ + uint8_t vddrcurrmax; /* 58:56 Max. read current at Vdd max */ + uint8_t vddwcurrmin; /* 55:53 Max. write current at Vdd min */ + uint8_t vddwcurrmax; /* 52:50 Max. write current at Vdd max */ + uint8_t csizemult; /* 49:47 Device size multiplier */ + + union + { + struct /* MMC system specification version 3.1 */ + { + uint8_t ergrpsize; /* 46:42 Erase group size (MMC 3.1) */ + uint8_t ergrpmult; /* 41:37 Erase group multiplier (MMC 3.1) */ + } mmc31; + struct /* MMC system specification version 2.2 */ + { + uint8_t sectorsize; /* 46:42 Erase sector size (MMC 2.2) */ + uint8_t ergrpsize; /* 41:37 Erase group size (MMC 2.2) */ + } mmc22; + } er; + + uint8_t mmcwpgrpsize; /* 36:32 Write protect group size (MMC) */ + } mmc; +#endif + struct + { + uint16_t csize; /* 73:62 Device size */ + uint8_t vddrcurrmin; /* 61:59 Max. read current at Vdd min */ + uint8_t vddrcurrmax; /* 58:56 Max. read current at Vdd max */ + uint8_t vddwcurrmin; /* 55:53 Max. write current at Vdd min */ + uint8_t vddwcurrmax; /* 52:50 Max. write current at Vdd max */ + uint8_t csizemult; /* 49:47 Device size multiplier */ + uint8_t sderblen; /* 46:46 Erase single block enable (SD) */ + uint8_t sdsectorsize; /* 45:39 Erase sector size (SD) */ + uint8_t sdwpgrpsize; /* 38:32 Write protect group size (SD) */ + } sdbyte; + + struct + { + /* 73:70 (reserved) */ + uint32_t csize; /* 69:48 Device size */ + /* 47:47 (reserved) */ + uint8_t sderblen; /* 46:46 Erase single block enable (SD) */ + uint8_t sdsectorsize; /* 45:39 Erase sector size (SD) */ + uint8_t sdwpgrpsize; /* 38:32 Write protect group size (SD) */ + } sdblock; + } u; + + uint8_t wpgrpen; /* 31:31 Write protect group enable */ + uint8_t mmcdfltecc; /* 30:29 Manufacturer default ECC (MMC) */ + uint8_t r2wfactor; /* 28:26 Write speed factor */ + uint8_t writebllen; /* 25:22 Max. write data block length */ + uint8_t writeblpartial; /* 21:21 Partial blocks for write allowed */ + uint8_t fileformatgrp; /* 15:15 File format group */ + uint8_t copy; /* 14:14 Copy flag (OTP) */ + uint8_t permwriteprotect; /* 13:13 Permanent write protection */ + uint8_t tmpwriteprotect; /* 12:12 Temporary write protection */ + uint8_t fileformat; /* 10:11 File format */ + uint8_t mmcecc; /* 9:8 ECC (MMC) */ + uint8_t crc; /* 7:1 CRC */ + /* 0:0 Not used */ +}; + +struct mmcsd_scr_s +{ + uint8_t scrversion; /* 63:60 Version of SCR structure */ + uint8_t sdversion; /* 59:56 SD memory card physical layer version */ + uint8_t erasestate; /* 55:55 Data state after erase (1 or 0) */ + uint8_t security; /* 54:52 SD security support */ + uint8_t buswidth; /* 51:48 DAT bus widthes supported */ + /* 47:32 SD reserved space */ + uint32_t mfgdata; /* 31:0 Reserved for manufacturing data */ +}; + +/******************************************************************************************** + * Public Data + ********************************************************************************************/ + +#undef EXTERN +#if defined(__cplusplus) +#define EXTERN extern "C" +extern "C" { +#else +#define EXTERN extern +#endif + +/******************************************************************************************** + * Public Functions + ********************************************************************************************/ + + +#undef EXTERN +#if defined(__cplusplus) +} +#endif +#endif /* __DRIVERS_MMCSD_MMCSD_SDIO_H */ diff --git a/nuttx/drivers/mmcsd/mmcsd_spi.h b/nuttx/drivers/mmcsd/mmcsd_spi.h index 055862beb..8c6f9bae7 100644 --- a/nuttx/drivers/mmcsd/mmcsd_spi.h +++ b/nuttx/drivers/mmcsd/mmcsd_spi.h @@ -2,7 +2,7 @@ * drivers/mmcsd/mmcsd_spi.h * * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions diff --git a/nuttx/drivers/mtd/at45db.c b/nuttx/drivers/mtd/at45db.c index f4a695de0..f3c0c72c1 100644 --- a/nuttx/drivers/mtd/at45db.c +++ b/nuttx/drivers/mtd/at45db.c @@ -3,7 +3,7 @@ * Driver for SPI-based AT45DB161D (16Mbit) * * Copyright (C) 2010-2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions diff --git a/nuttx/drivers/mtd/flash_eraseall.c b/nuttx/drivers/mtd/flash_eraseall.c index 77666ff03..ce0cfe649 100644 --- a/nuttx/drivers/mtd/flash_eraseall.c +++ b/nuttx/drivers/mtd/flash_eraseall.c @@ -2,7 +2,7 @@ * drivers/mtd/flash_eraseall.c * * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions diff --git a/nuttx/drivers/mtd/ftl.c b/nuttx/drivers/mtd/ftl.c index b16397883..cdb35aa5c 100644 --- a/nuttx/drivers/mtd/ftl.c +++ b/nuttx/drivers/mtd/ftl.c @@ -2,7 +2,7 @@ * drivers/mtd/ftl.c * * Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions diff --git a/nuttx/drivers/mtd/skeleton.c b/nuttx/drivers/mtd/skeleton.c index 673ddadb3..a2fb98238 100644 --- a/nuttx/drivers/mtd/skeleton.c +++ b/nuttx/drivers/mtd/skeleton.c @@ -2,7 +2,7 @@ * drivers/mtd/skeleton.c * * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions diff --git a/nuttx/drivers/net/cs89x0.c b/nuttx/drivers/net/cs89x0.c index 0f301ee00..22b9b87a5 100644 --- a/nuttx/drivers/net/cs89x0.c +++ b/nuttx/drivers/net/cs89x0.c @@ -2,7 +2,7 @@ * drivers/net/cs89x0.c * * Copyright (C) 2009-2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions diff --git a/nuttx/drivers/net/cs89x0.h b/nuttx/drivers/net/cs89x0.h index c2073eb98..f6d99120a 100644 --- a/nuttx/drivers/net/cs89x0.h +++ b/nuttx/drivers/net/cs89x0.h @@ -1,326 +1,326 @@ -/****************************************************************************
- * drivers/net/cs89x0.h
- *
- * Copyright (C) 2009 Gregory Nutt. All rights reserved.
- * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- * used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#ifndef __DRIVERS_NET_CS89x0_H
-#define __DRIVERS_NET_CS89x0_H
-
-/****************************************************************************
- * Included Files
- ****************************************************************************/
-
-/****************************************************************************
- * Pre-processor Definitions
- ****************************************************************************/
-
-/* CONFIG_CS89x0_ALIGN16/32 determines if the 16-bit CS89x0 registers are
- * aligned to 16-bit or 32-bit address boundaries. NOTE: If there multiple
- * CS89x00 parts in the board architecture, we assume that the address
- * alignment is the same for all implementations. If that is not the
- * case, then it will be necessary to move a shift value into
- * the cs89x0_driver_s structure and calculate the offsets dynamically in
- * the putreg and getreg functions.
- */
-
-#if defined(CONFIG_CS89x0_ALIGN16)
-# define CS89x0_RTDATA_OFFSET (0 << 1)
-# define CS89x0_TxCMD_OFFSET (2 << 1)
-# define CS89x0_TxLEN_OFFSET (3 << 1)
-# define CS89x0_ISQ_OFFSET (4 << 1)
-# define CS89x0_PPTR_OFFSET (5 << 1)
-# define CS89x0_PDATA_OFFSET (6 << 1)
-#elif defined(CONFIG_CS89x0_ALIGN32)
-# define CS89x0_RTDATA_OFFSET (0 << 2)
-# define CS89x0_TxCMD_OFFSET (2 << 2)
-# define CS89x0_TxLEN_OFFSET (3 << 2)
-# define CS89x0_ISQ_OFFSET (4 << 2)
-# define CS89x0_PPTR_OFFSET (5 << 2)
-# define CS89x0_PDATA_OFFSET (6 << 2)
-#else
-# error "CS89x00 address alignment is not defined"
-#endif
-
-/* ISQ register bit definitions */
-
-#define ISQ_EVENTMASK 0x003f /* Bits 0-5 indicate the status register */
-#define ISQ_RXEVENT 0x0004
-#define ISQ_TXEVENT 0x0008
-#define ISQ_BUFEVENT 0x000c
-#define ISQ_RXMISSEVENT 0x0010
-#define ISQ_TXCOLEVENT 0x0012
-
-/* ISQ register TxEVENT bit definitions*/
-
-#define ISQ_RXEVENT_IAHASH (1 << 6)
-#define ISQ_RXEVENT_DRIBBLE (1 << 7)
-#define ISQ_RXEVENT_RXOK (1 << 8)
-#define ISQ_RXEVENT_HASHED (1 << 9)
-#define ISQ_RXEVENT_HASHNDX_SHIFT 10
-#define ISQ_RXEVENT_HASHNDX_MASK (0x3f << ISQ_RXEVENT_HASHNDX_SHIFT)
-
-/* ISQ register TxEVENT bit definitions*/
-
-#define ISQ_TXEVENT_LOSSOFCRS (1 << 6)
-#define ISQ_TXEVENT_SQEERROR (1 << 7)
-#define ISQ_TXEVENT_TXOK (1 << 8)
-#define ISQ_TXEVENT_OUTWINDOW (1 << 9)
-#define ISQ_TXEVENT_JABBER (1 << 10)
-#define ISQ_TXEVENT_NCOLLISION_SHIFT 11
-#define ISQ_TXEVENT_NCOLLISION_MASK (15 << ISQ_TXEVENT_NCOLLISION_SHIFT)
-#define ISQ_TXEVENT_16COLL (1 << 15)
-
-/* ISQ register BufEVENT bit definitions */
-
-#define ISQ_BUFEVENT_SWINT (1 << 6)
-#define ISQ_BUFEVENT_RXDMAFRAME (1 << 7)
-#define ISQ_BUFEVENT_RDY4TX (1 << 8)
-#define ISQ_BUFEVENT_TXUNDERRUN (1 << 9)
-#define ISQ_BUFEVENT_RXMISS (1 << 10)
-#define ISQ_BUFEVENT_RX128 (1 << 11)
-#define ISQ_BUFEVENT_RXDEST (1 << 15)
-
-/* Packet page register offsets *********************************************/
-
-/* 0x0000 Bus interface registers */
-
-#define PPR_CHIPID 0x0000 /* Chip identifier - must be 0x630E */
-#define PPR_CHIPREV 0x0002 /* Chip revision, model codes */
-#define PPR_IOBASEADDRESS 0x0020 /* I/O Base Address */
-#define PPR_INTREG 0x0022 /* Interrupt configuration */
-# define PPR_INTREG_IRQ0 0x0000 /* Use INTR0 pin */
-# define PPR_INTREG_IRQ1 0x0001 /* Use INTR1 pin */
-# define PPR_INTREG_IRQ2 0x0002 /* Use INTR2 pin */
-# define PPR_INTREG_IRQ3 0x0003 /* Use INTR3 pin */
-
-#define PPR_DMACHANNELNUMBER 0x0024 /* DMA Channel Number (0,1, or 2) */
-#define PPR_DMASTARTOFFRAME 0x0026 /* DMA Start of Frame */
-#define PPR_DMAFRAMECOUNT 0x0028 /* DMA Frame Count (12-bits) */
-#define PPR_RXDMABYTECOUNT 0x002a /* Rx DMA Byte Count */
-#define PPR_MEMORYBASEADDRESS 0x002c /* Memory Base Address Register (20-bit) */
-#define PPR_BOOTPROMBASEADDRESS 0x0030 /* Boot PROM Base Address */
-#define PPR_BOOTPROMADDRESSMASK 0x0034 /* Boot PROM Address Mask */
-#define PPR_EEPROMCOMMAND 0x0040 /* EEPROM Command */
-#define PPR_EEPROMDATA 0x0042 /* EEPROM Data */
-#define PPR_RECVFRAMEBYTES 0x0050 /* Received Frame Byte Counter */
-
-/* 0x0100 - Configuration and control registers */
-
-#define PPR_RXCFG 0x0102 /* Receiver configuration */
-# define PPR_RXCFG_SKIP1 (1 << 6) /* Skip (discard) current frame */
-# define PPR_RXCFG_STREAM (1 << 7) /* Enable streaming mode */
-# define PPR_RXCFG_RXOK (1 << 8) /* RxOK interrupt enable */
-# define PPR_RxCFG_RxDMAonly (1 << 9) /* Use RxDMA for all frames */
-# define PPR_RxCFG_AutoRxDMA (1 << 10) /* Select RxDMA automatically */
-# define PPR_RxCFG_BufferCRC (1 << 11) /* Include CRC characters in frame */
-# define PPR_RxCFG_CRC (1 << 12) /* Enable interrupt on CRC error */
-# define PPR_RxCFG_RUNT (1 << 13) /* Enable interrupt on RUNT frames */
-# define PPR_RxCFG_EXTRA (1 << 14) /* Enable interrupt on frames with extra data */
-
-#define PPR_RXCTL 0x0104 /* Receiver control */
-# define PPR_RXCTL_IAHASH (1 << 6) /* Accept frames that match hash */
-# define PPR_RXCTL_PROMISCUOUS (1 << 7) /* Accept any frame */
-# define PPR_RXCTL_RXOK (1 << 8) /* Accept well formed frames */
-# define PPR_RXCTL_MULTICAST (1 << 9) /* Accept multicast frames */
-# define PPR_RXCTL_IA (1 << 10) /* Accept frame that matches IA */
-# define PPR_RXCTL_BROADCAST (1 << 11) /* Accept broadcast frames */
-# define PPR_RXCTL_CRC (1 << 12) /* Accept frames with bad CRC */
-# define PPR_RXCTL_RUNT (1 << 13) /* Accept runt frames */
-# define PPR_RXCTL_EXTRA (1 << 14) /* Accept frames that are too long */
-
-#define PPR_TXCFG 0x0106 /* Transmit configuration */
-# define PPR_TXCFG_CRS (1 << 6) /* Enable interrupt on loss of carrier */
-# define PPR_TXCFG_SQE (1 << 7) /* Enable interrupt on Signal Quality Error */
-# define PPR_TXCFG_TXOK (1 << 8) /* Enable interrupt on successful xmits */
-# define PPR_TXCFG_LATE (1 << 9) /* Enable interrupt on "out of window" */
-# define PPR_TXCFG_JABBER (1 << 10) /* Enable interrupt on jabber detect */
-# define PPR_TXCFG_COLLISION (1 << 11) /* Enable interrupt if collision */
-# define PPR_TXCFG_16COLLISIONS (1 << 15) /* Enable interrupt if > 16 collisions */
-
-#define PPR_TXCMD 0x0108 /* Transmit command status */
-# define PPR_TXCMD_TXSTART5 (0 << 6) /* Start after 5 bytes in buffer */
-# define PPR_TXCMD_TXSTART381 (1 << 6) /* Start after 381 bytes in buffer */
-# define PPR_TXCMD_TXSTART1021 (2 << 6) /* Start after 1021 bytes in buffer */
-# define PPR_TXCMD_TXSTARTFULL (3 << 6) /* Start after all bytes loaded */
-# define PPR_TXCMD_FORCE (1 << 8) /* Discard any pending packets */
-# define PPR_TXCMD_ONECOLLISION (1 << 9) /* Abort after a single collision */
-# define PPR_TXCMD_NOCRC (1 << 12) /* Do not add CRC */
-# define PPR_TXCMD_NOPAD (1 << 13) /* Do not pad short packets */
-
-#define PPR_BUFCFG 0x010a /* Buffer configuration */
-# define PPR_BUFCFG_SWI (1 << 6) /* Force interrupt via software */
-# define PPR_BUFCFG_RXDMA (1 << 7) /* Enable interrupt on Rx DMA */
-# define PPR_BUFCFG_TXRDY (1 << 8) /* Enable interrupt when ready for Tx */
-# define PPR_BUFCFG_TXUE (1 << 9) /* Enable interrupt in Tx underrun */
-# define PPR_BUFCFG_RXMISS (1 << 10) /* Enable interrupt on missed Rx packets */
-# define PPR_BUFCFG_RX128 (1 << 11) /* Enable Rx interrupt after 128 bytes */
-# define PPR_BUFCFG_TXCOL (1 << 12) /* Enable int on Tx collision ctr overflow */
-# define PPR_BUFCFG_MISS (1 << 13) /* Enable int on Rx miss ctr overflow */
-# define PPR_BUFCFG_RXDEST (1 << 15) /* Enable int on Rx dest addr match */
-
-#define PPR_LINECTL 0x0112 /* Line control */
-# define PPR_LINECTL_RX (1 << 6) /* Enable receiver */
-# define PPR_LINECTL_TX (1 << 7) /* Enable transmitter */
-# define PPR_LINECTL_AUIONLY (1 << 8) /* AUI interface only */
-# define PPR_LINECTL_AUTOAUI10BT (1 << 9) /* Autodetect AUI or 10BaseT interface */
-# define PPR_LINECTL_MODBACKOFFE (1 << 11) /* Enable modified backoff algorithm */
-# define PPR_LINECTL_POLARITYDIS (1 << 12) /* Disable Rx polarity autodetect */
-# define PPR_LINECTL_2PARTDEFDIS (1 << 13) /* Disable two-part defferal */
-# define PPR_LINECTL_LORXSQUELCH (1 << 14) /* Reduce receiver squelch threshold */
-
-#define PPR_SELFCTL 0x0114 /* Chip self control */
-# define PPR_SELFCTL_RESET (1 << 6) /* Self-clearing reset */
-# define PPR_SELFCTL_SWSUSPEND (1 << 8) /* Initiate suspend mode */
-# define PPR_SELFCTL_HWSLEEPE (1 << 9) /* Enable SLEEP input */
-# define PPR_SELFCTL_HWSTANDBYE (1 << 10) /* Enable standby mode */
-# define PPR_SELFCTL_HC0E (1 << 12) /* Use HCB0 for LINK LED */
-# define PPR_SELFCTL_HC1E (1 << 13) /* Use HCB1 for BSTATUS LED */
-# define PPR_SELFCTL_HCB0 (1 << 14) /* Control LINK LED if HC0E set */
-# define PPR_SELFCTL_HCB1 (1 << 15) /* Cntrol BSTATUS LED if HC1E set */
-
-#define PPR_BUSCTL 0x0116 /* Bus control */
-# define PPR_BUSCTL_RESETRXDMA (1 << 6) /* Reset RxDMA pointer */
-# define PPR_BUSCTL_DMAEXTEND (1 << 8) /* Extend DMA cycle */
-# define PPR_BUSCTL_USESA (1 << 9) /* Assert MEMCS16 on address decode */
-# define PPR_BUSCTL_MEMORYE (1 << 10) /* Enable memory mode */
-# define PPR_BUSCTL_DMABURST (1 << 11) /* Limit DMA access burst */
-# define PPR_BUSCTL_IOCHRDYE (1 << 12) /* Set IOCHRDY high impedence */
-# define PPR_BUSCTL_RXDMASIZE (1 << 13) /* Set DMA buffer size 64KB */
-# define PPR_BUSCTL_ENABLEIRQ (1 << 15) /* Generate interrupt on interrupt event */
-
-#define PPR_TESTCTL 0x0118 /* Test control */
-# define PPR_TESTCTL_DISABLELT (1 << 7) /* Disable link status */
-# define PPR_TESTCTL_ENDECLOOP (1 << 9) /* Internal loopback */
-# define PPR_TESTCTL_AUILOOP (1 << 10) /* AUI loopback */
-# define PPR_TESTCTL_DISBACKOFF (1 << 11) /* Disable backoff algorithm */
-# define PPR_TESTCTL_FDX (1 << 14) /* Enable full duplex mode */
-
-/* 0x0120 - Status and Event Registers */
-
-#define PPR_ISQ 0x0120 /* Interrupt Status Queue */
-#define PPR_RER 0x0124 /* Receive event */
-# define PPR_RER_IAHASH (1 << 6) /* Frame hash match */
-# define PPR_RER_DRIBBLE (1 << 7) /* Frame had 1-7 extra bits after last byte */
-# define PPR_RER_RXOK (1 << 8) /* Frame received with no errors */
-# define PPR_RER_HASHED (1 << 9) /* Frame address hashed OK */
-# define PPR_RER_IA (1 << 10) /* Frame address matched IA */
-# define PPR_RER_BROADCAST (1 << 11) /* Broadcast frame */
-# define PPR_RER_CRC (1 << 12) /* Frame had CRC error */
-# define PPR_RER_RUNT (1 << 13) /* Runt frame */
-# define PPR_RER_EXTRA (1 << 14) /* Frame was too long */
-
-#define PPR_TER 0x0128 /* Transmit event */
-# define PPR_TER_CRS (1 << 6) /* Carrier lost */
-# define PPR_TER_SQE (1 << 7) /* Signal Quality Error */
-# define PPR_TER_TXOK (1 << 8) /* Packet sent without error */
-# define PPR_TER_LATE (1 << 9) /* Out of window */
-# define PPR_TER_JABBER (1 << 10) /* Stuck transmit? */
-# define PPR_TER_NUMCOLLISIONS_SHIFT 11
-# define PPR_TER_NUMCOLLISIONS_MASK (15 << PPR_TER_NUMCOLLISIONS_SHIFT)
-# define PPR_TER_16COLLISIONS (1 << 15) /* > 16 collisions */
-
-#define PPR_BER 0x012C /* Buffer event */
-# define PPR_BER_SWINT (1 << 6) /* Software interrupt */
-# define PPR_BER_RXDMAFRAME (1 << 7) /* Received framed DMAed */
-# define PPR_BER_RDY4TX (1 << 8) /* Ready for transmission */
-# define PPR_BER_TXUNDERRUN (1 << 9) /* Transmit underrun */
-# define PPR_BER_RXMISS (1 << 10) /* Received frame missed */
-# define PPR_BER_RX128 (1 << 11) /* 128 bytes received */
-# define PPR_BER_RXDEST (1 << 15) /* Received framed passed address filter */
-
-#define PPR_RXMISS 0x0130 /* Receiver miss counter */
-#define PPR_TXCOL 0x0132 /* Transmit collision counter */
-#define PPR_LINESTAT 0x0134 /* Line status */
-# define PPR_LINESTAT_LINKOK (1 << 7) /* Line is connected and working */
-# define PPR_LINESTAT_AUI (1 << 8) /* Connected via AUI */
-# define PPR_LINESTAT_10BT (1 << 9) /* Connected via twisted pair */
-# define PPR_LINESTAT_POLARITY (1 << 12) /* Line polarity OK (10BT only) */
-# define PPR_LINESTAT_CRS (1 << 14) /* Frame being received */
-
-#define PPR_SELFSTAT 0x0136 /* Chip self status */
-# define PPR_SELFSTAT_33VACTIVE (1 << 6) /* supply voltage is 3.3V */
-# define PPR_SELFSTAT_INITD (1 << 7) /* Chip initialization complete */
-# define PPR_SELFSTAT_SIBSY (1 << 8) /* EEPROM is busy */
-# define PPR_SELFSTAT_EEPROM (1 << 9) /* EEPROM present */
-# define PPR_SELFSTAT_EEPROMOK (1 << 10) /* EEPROM checks out */
-# define PPR_SELFSTAT_ELPRESENT (1 << 11) /* External address latch logic available */
-# define PPR_SELFSTAT_EESIZE (1 << 12) /* Size of EEPROM */
-
-#define PPR_BUSSTAT 0x0138 /* Bus status */
-# define PPR_BUSSTAT_TXBID (1 << 7) /* Tx error */
-# define PPR_BUSSTAT_TXRDY (1 << 8) /* Ready for Tx data */
-
-#define PPR_TDR 0x013C /* AUI Time Domain Reflectometer */
-
-/* 0x0144 - Initiate transmit registers */
-
-#define PPR_TXCOMMAND 0x0144 /* Tx Command */
-#define PPR_TXLENGTH 0x0146 /* Tx Length */
-
-/* 0x0150 - Address filter registers */
-
-#define PPR_LAF 0x0150 /* Logical address filter (6 bytes) */
-#define PPR_IA 0x0158 /* Individual address (MAC) */
-
-/* 0x0400 - Frame location registers */
-
-#define PPR_RXSTATUS 0x0400 /* Rx Status */
-#define PPR_RXLENGTH 0x0402 /* Rx Length */
-#define PPR_RXFRAMELOCATION 0x0404 /* Rx Frame Location */
-#define PPR_TXFRAMELOCATION 0x0a00 /* Tx Frame Location */
-
-/****************************************************************************
- * Public Types
- ****************************************************************************/
-
-/****************************************************************************
- * Public Data
- ****************************************************************************/
-
-#ifdef __cplusplus
-#define EXTERN extern "C"
-extern "C" {
-#else
-#define EXTERN extern
-#endif
-
-/****************************************************************************
- * Public Function Prototypes
- ****************************************************************************/
-
-#undef EXTERN
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __DRIVERS_NET_CS89x0_H */
+/**************************************************************************** + * drivers/net/cs89x0.h + * + * Copyright (C) 2009 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +#ifndef __DRIVERS_NET_CS89x0_H +#define __DRIVERS_NET_CS89x0_H + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +/* CONFIG_CS89x0_ALIGN16/32 determines if the 16-bit CS89x0 registers are + * aligned to 16-bit or 32-bit address boundaries. NOTE: If there multiple + * CS89x00 parts in the board architecture, we assume that the address + * alignment is the same for all implementations. If that is not the + * case, then it will be necessary to move a shift value into + * the cs89x0_driver_s structure and calculate the offsets dynamically in + * the putreg and getreg functions. + */ + +#if defined(CONFIG_CS89x0_ALIGN16) +# define CS89x0_RTDATA_OFFSET (0 << 1) +# define CS89x0_TxCMD_OFFSET (2 << 1) +# define CS89x0_TxLEN_OFFSET (3 << 1) +# define CS89x0_ISQ_OFFSET (4 << 1) +# define CS89x0_PPTR_OFFSET (5 << 1) +# define CS89x0_PDATA_OFFSET (6 << 1) +#elif defined(CONFIG_CS89x0_ALIGN32) +# define CS89x0_RTDATA_OFFSET (0 << 2) +# define CS89x0_TxCMD_OFFSET (2 << 2) +# define CS89x0_TxLEN_OFFSET (3 << 2) +# define CS89x0_ISQ_OFFSET (4 << 2) +# define CS89x0_PPTR_OFFSET (5 << 2) +# define CS89x0_PDATA_OFFSET (6 << 2) +#else +# error "CS89x00 address alignment is not defined" +#endif + +/* ISQ register bit definitions */ + +#define ISQ_EVENTMASK 0x003f /* Bits 0-5 indicate the status register */ +#define ISQ_RXEVENT 0x0004 +#define ISQ_TXEVENT 0x0008 +#define ISQ_BUFEVENT 0x000c +#define ISQ_RXMISSEVENT 0x0010 +#define ISQ_TXCOLEVENT 0x0012 + +/* ISQ register TxEVENT bit definitions*/ + +#define ISQ_RXEVENT_IAHASH (1 << 6) +#define ISQ_RXEVENT_DRIBBLE (1 << 7) +#define ISQ_RXEVENT_RXOK (1 << 8) +#define ISQ_RXEVENT_HASHED (1 << 9) +#define ISQ_RXEVENT_HASHNDX_SHIFT 10 +#define ISQ_RXEVENT_HASHNDX_MASK (0x3f << ISQ_RXEVENT_HASHNDX_SHIFT) + +/* ISQ register TxEVENT bit definitions*/ + +#define ISQ_TXEVENT_LOSSOFCRS (1 << 6) +#define ISQ_TXEVENT_SQEERROR (1 << 7) +#define ISQ_TXEVENT_TXOK (1 << 8) +#define ISQ_TXEVENT_OUTWINDOW (1 << 9) +#define ISQ_TXEVENT_JABBER (1 << 10) +#define ISQ_TXEVENT_NCOLLISION_SHIFT 11 +#define ISQ_TXEVENT_NCOLLISION_MASK (15 << ISQ_TXEVENT_NCOLLISION_SHIFT) +#define ISQ_TXEVENT_16COLL (1 << 15) + +/* ISQ register BufEVENT bit definitions */ + +#define ISQ_BUFEVENT_SWINT (1 << 6) +#define ISQ_BUFEVENT_RXDMAFRAME (1 << 7) +#define ISQ_BUFEVENT_RDY4TX (1 << 8) +#define ISQ_BUFEVENT_TXUNDERRUN (1 << 9) +#define ISQ_BUFEVENT_RXMISS (1 << 10) +#define ISQ_BUFEVENT_RX128 (1 << 11) +#define ISQ_BUFEVENT_RXDEST (1 << 15) + +/* Packet page register offsets *********************************************/ + +/* 0x0000 Bus interface registers */ + +#define PPR_CHIPID 0x0000 /* Chip identifier - must be 0x630E */ +#define PPR_CHIPREV 0x0002 /* Chip revision, model codes */ +#define PPR_IOBASEADDRESS 0x0020 /* I/O Base Address */ +#define PPR_INTREG 0x0022 /* Interrupt configuration */ +# define PPR_INTREG_IRQ0 0x0000 /* Use INTR0 pin */ +# define PPR_INTREG_IRQ1 0x0001 /* Use INTR1 pin */ +# define PPR_INTREG_IRQ2 0x0002 /* Use INTR2 pin */ +# define PPR_INTREG_IRQ3 0x0003 /* Use INTR3 pin */ + +#define PPR_DMACHANNELNUMBER 0x0024 /* DMA Channel Number (0,1, or 2) */ +#define PPR_DMASTARTOFFRAME 0x0026 /* DMA Start of Frame */ +#define PPR_DMAFRAMECOUNT 0x0028 /* DMA Frame Count (12-bits) */ +#define PPR_RXDMABYTECOUNT 0x002a /* Rx DMA Byte Count */ +#define PPR_MEMORYBASEADDRESS 0x002c /* Memory Base Address Register (20-bit) */ +#define PPR_BOOTPROMBASEADDRESS 0x0030 /* Boot PROM Base Address */ +#define PPR_BOOTPROMADDRESSMASK 0x0034 /* Boot PROM Address Mask */ +#define PPR_EEPROMCOMMAND 0x0040 /* EEPROM Command */ +#define PPR_EEPROMDATA 0x0042 /* EEPROM Data */ +#define PPR_RECVFRAMEBYTES 0x0050 /* Received Frame Byte Counter */ + +/* 0x0100 - Configuration and control registers */ + +#define PPR_RXCFG 0x0102 /* Receiver configuration */ +# define PPR_RXCFG_SKIP1 (1 << 6) /* Skip (discard) current frame */ +# define PPR_RXCFG_STREAM (1 << 7) /* Enable streaming mode */ +# define PPR_RXCFG_RXOK (1 << 8) /* RxOK interrupt enable */ +# define PPR_RxCFG_RxDMAonly (1 << 9) /* Use RxDMA for all frames */ +# define PPR_RxCFG_AutoRxDMA (1 << 10) /* Select RxDMA automatically */ +# define PPR_RxCFG_BufferCRC (1 << 11) /* Include CRC characters in frame */ +# define PPR_RxCFG_CRC (1 << 12) /* Enable interrupt on CRC error */ +# define PPR_RxCFG_RUNT (1 << 13) /* Enable interrupt on RUNT frames */ +# define PPR_RxCFG_EXTRA (1 << 14) /* Enable interrupt on frames with extra data */ + +#define PPR_RXCTL 0x0104 /* Receiver control */ +# define PPR_RXCTL_IAHASH (1 << 6) /* Accept frames that match hash */ +# define PPR_RXCTL_PROMISCUOUS (1 << 7) /* Accept any frame */ +# define PPR_RXCTL_RXOK (1 << 8) /* Accept well formed frames */ +# define PPR_RXCTL_MULTICAST (1 << 9) /* Accept multicast frames */ +# define PPR_RXCTL_IA (1 << 10) /* Accept frame that matches IA */ +# define PPR_RXCTL_BROADCAST (1 << 11) /* Accept broadcast frames */ +# define PPR_RXCTL_CRC (1 << 12) /* Accept frames with bad CRC */ +# define PPR_RXCTL_RUNT (1 << 13) /* Accept runt frames */ +# define PPR_RXCTL_EXTRA (1 << 14) /* Accept frames that are too long */ + +#define PPR_TXCFG 0x0106 /* Transmit configuration */ +# define PPR_TXCFG_CRS (1 << 6) /* Enable interrupt on loss of carrier */ +# define PPR_TXCFG_SQE (1 << 7) /* Enable interrupt on Signal Quality Error */ +# define PPR_TXCFG_TXOK (1 << 8) /* Enable interrupt on successful xmits */ +# define PPR_TXCFG_LATE (1 << 9) /* Enable interrupt on "out of window" */ +# define PPR_TXCFG_JABBER (1 << 10) /* Enable interrupt on jabber detect */ +# define PPR_TXCFG_COLLISION (1 << 11) /* Enable interrupt if collision */ +# define PPR_TXCFG_16COLLISIONS (1 << 15) /* Enable interrupt if > 16 collisions */ + +#define PPR_TXCMD 0x0108 /* Transmit command status */ +# define PPR_TXCMD_TXSTART5 (0 << 6) /* Start after 5 bytes in buffer */ +# define PPR_TXCMD_TXSTART381 (1 << 6) /* Start after 381 bytes in buffer */ +# define PPR_TXCMD_TXSTART1021 (2 << 6) /* Start after 1021 bytes in buffer */ +# define PPR_TXCMD_TXSTARTFULL (3 << 6) /* Start after all bytes loaded */ +# define PPR_TXCMD_FORCE (1 << 8) /* Discard any pending packets */ +# define PPR_TXCMD_ONECOLLISION (1 << 9) /* Abort after a single collision */ +# define PPR_TXCMD_NOCRC (1 << 12) /* Do not add CRC */ +# define PPR_TXCMD_NOPAD (1 << 13) /* Do not pad short packets */ + +#define PPR_BUFCFG 0x010a /* Buffer configuration */ +# define PPR_BUFCFG_SWI (1 << 6) /* Force interrupt via software */ +# define PPR_BUFCFG_RXDMA (1 << 7) /* Enable interrupt on Rx DMA */ +# define PPR_BUFCFG_TXRDY (1 << 8) /* Enable interrupt when ready for Tx */ +# define PPR_BUFCFG_TXUE (1 << 9) /* Enable interrupt in Tx underrun */ +# define PPR_BUFCFG_RXMISS (1 << 10) /* Enable interrupt on missed Rx packets */ +# define PPR_BUFCFG_RX128 (1 << 11) /* Enable Rx interrupt after 128 bytes */ +# define PPR_BUFCFG_TXCOL (1 << 12) /* Enable int on Tx collision ctr overflow */ +# define PPR_BUFCFG_MISS (1 << 13) /* Enable int on Rx miss ctr overflow */ +# define PPR_BUFCFG_RXDEST (1 << 15) /* Enable int on Rx dest addr match */ + +#define PPR_LINECTL 0x0112 /* Line control */ +# define PPR_LINECTL_RX (1 << 6) /* Enable receiver */ +# define PPR_LINECTL_TX (1 << 7) /* Enable transmitter */ +# define PPR_LINECTL_AUIONLY (1 << 8) /* AUI interface only */ +# define PPR_LINECTL_AUTOAUI10BT (1 << 9) /* Autodetect AUI or 10BaseT interface */ +# define PPR_LINECTL_MODBACKOFFE (1 << 11) /* Enable modified backoff algorithm */ +# define PPR_LINECTL_POLARITYDIS (1 << 12) /* Disable Rx polarity autodetect */ +# define PPR_LINECTL_2PARTDEFDIS (1 << 13) /* Disable two-part defferal */ +# define PPR_LINECTL_LORXSQUELCH (1 << 14) /* Reduce receiver squelch threshold */ + +#define PPR_SELFCTL 0x0114 /* Chip self control */ +# define PPR_SELFCTL_RESET (1 << 6) /* Self-clearing reset */ +# define PPR_SELFCTL_SWSUSPEND (1 << 8) /* Initiate suspend mode */ +# define PPR_SELFCTL_HWSLEEPE (1 << 9) /* Enable SLEEP input */ +# define PPR_SELFCTL_HWSTANDBYE (1 << 10) /* Enable standby mode */ +# define PPR_SELFCTL_HC0E (1 << 12) /* Use HCB0 for LINK LED */ +# define PPR_SELFCTL_HC1E (1 << 13) /* Use HCB1 for BSTATUS LED */ +# define PPR_SELFCTL_HCB0 (1 << 14) /* Control LINK LED if HC0E set */ +# define PPR_SELFCTL_HCB1 (1 << 15) /* Cntrol BSTATUS LED if HC1E set */ + +#define PPR_BUSCTL 0x0116 /* Bus control */ +# define PPR_BUSCTL_RESETRXDMA (1 << 6) /* Reset RxDMA pointer */ +# define PPR_BUSCTL_DMAEXTEND (1 << 8) /* Extend DMA cycle */ +# define PPR_BUSCTL_USESA (1 << 9) /* Assert MEMCS16 on address decode */ +# define PPR_BUSCTL_MEMORYE (1 << 10) /* Enable memory mode */ +# define PPR_BUSCTL_DMABURST (1 << 11) /* Limit DMA access burst */ +# define PPR_BUSCTL_IOCHRDYE (1 << 12) /* Set IOCHRDY high impedence */ +# define PPR_BUSCTL_RXDMASIZE (1 << 13) /* Set DMA buffer size 64KB */ +# define PPR_BUSCTL_ENABLEIRQ (1 << 15) /* Generate interrupt on interrupt event */ + +#define PPR_TESTCTL 0x0118 /* Test control */ +# define PPR_TESTCTL_DISABLELT (1 << 7) /* Disable link status */ +# define PPR_TESTCTL_ENDECLOOP (1 << 9) /* Internal loopback */ +# define PPR_TESTCTL_AUILOOP (1 << 10) /* AUI loopback */ +# define PPR_TESTCTL_DISBACKOFF (1 << 11) /* Disable backoff algorithm */ +# define PPR_TESTCTL_FDX (1 << 14) /* Enable full duplex mode */ + +/* 0x0120 - Status and Event Registers */ + +#define PPR_ISQ 0x0120 /* Interrupt Status Queue */ +#define PPR_RER 0x0124 /* Receive event */ +# define PPR_RER_IAHASH (1 << 6) /* Frame hash match */ +# define PPR_RER_DRIBBLE (1 << 7) /* Frame had 1-7 extra bits after last byte */ +# define PPR_RER_RXOK (1 << 8) /* Frame received with no errors */ +# define PPR_RER_HASHED (1 << 9) /* Frame address hashed OK */ +# define PPR_RER_IA (1 << 10) /* Frame address matched IA */ +# define PPR_RER_BROADCAST (1 << 11) /* Broadcast frame */ +# define PPR_RER_CRC (1 << 12) /* Frame had CRC error */ +# define PPR_RER_RUNT (1 << 13) /* Runt frame */ +# define PPR_RER_EXTRA (1 << 14) /* Frame was too long */ + +#define PPR_TER 0x0128 /* Transmit event */ +# define PPR_TER_CRS (1 << 6) /* Carrier lost */ +# define PPR_TER_SQE (1 << 7) /* Signal Quality Error */ +# define PPR_TER_TXOK (1 << 8) /* Packet sent without error */ +# define PPR_TER_LATE (1 << 9) /* Out of window */ +# define PPR_TER_JABBER (1 << 10) /* Stuck transmit? */ +# define PPR_TER_NUMCOLLISIONS_SHIFT 11 +# define PPR_TER_NUMCOLLISIONS_MASK (15 << PPR_TER_NUMCOLLISIONS_SHIFT) +# define PPR_TER_16COLLISIONS (1 << 15) /* > 16 collisions */ + +#define PPR_BER 0x012C /* Buffer event */ +# define PPR_BER_SWINT (1 << 6) /* Software interrupt */ +# define PPR_BER_RXDMAFRAME (1 << 7) /* Received framed DMAed */ +# define PPR_BER_RDY4TX (1 << 8) /* Ready for transmission */ +# define PPR_BER_TXUNDERRUN (1 << 9) /* Transmit underrun */ +# define PPR_BER_RXMISS (1 << 10) /* Received frame missed */ +# define PPR_BER_RX128 (1 << 11) /* 128 bytes received */ +# define PPR_BER_RXDEST (1 << 15) /* Received framed passed address filter */ + +#define PPR_RXMISS 0x0130 /* Receiver miss counter */ +#define PPR_TXCOL 0x0132 /* Transmit collision counter */ +#define PPR_LINESTAT 0x0134 /* Line status */ +# define PPR_LINESTAT_LINKOK (1 << 7) /* Line is connected and working */ +# define PPR_LINESTAT_AUI (1 << 8) /* Connected via AUI */ +# define PPR_LINESTAT_10BT (1 << 9) /* Connected via twisted pair */ +# define PPR_LINESTAT_POLARITY (1 << 12) /* Line polarity OK (10BT only) */ +# define PPR_LINESTAT_CRS (1 << 14) /* Frame being received */ + +#define PPR_SELFSTAT 0x0136 /* Chip self status */ +# define PPR_SELFSTAT_33VACTIVE (1 << 6) /* supply voltage is 3.3V */ +# define PPR_SELFSTAT_INITD (1 << 7) /* Chip initialization complete */ +# define PPR_SELFSTAT_SIBSY (1 << 8) /* EEPROM is busy */ +# define PPR_SELFSTAT_EEPROM (1 << 9) /* EEPROM present */ +# define PPR_SELFSTAT_EEPROMOK (1 << 10) /* EEPROM checks out */ +# define PPR_SELFSTAT_ELPRESENT (1 << 11) /* External address latch logic available */ +# define PPR_SELFSTAT_EESIZE (1 << 12) /* Size of EEPROM */ + +#define PPR_BUSSTAT 0x0138 /* Bus status */ +# define PPR_BUSSTAT_TXBID (1 << 7) /* Tx error */ +# define PPR_BUSSTAT_TXRDY (1 << 8) /* Ready for Tx data */ + +#define PPR_TDR 0x013C /* AUI Time Domain Reflectometer */ + +/* 0x0144 - Initiate transmit registers */ + +#define PPR_TXCOMMAND 0x0144 /* Tx Command */ +#define PPR_TXLENGTH 0x0146 /* Tx Length */ + +/* 0x0150 - Address filter registers */ + +#define PPR_LAF 0x0150 /* Logical address filter (6 bytes) */ +#define PPR_IA 0x0158 /* Individual address (MAC) */ + +/* 0x0400 - Frame location registers */ + +#define PPR_RXSTATUS 0x0400 /* Rx Status */ +#define PPR_RXLENGTH 0x0402 /* Rx Length */ +#define PPR_RXFRAMELOCATION 0x0404 /* Rx Frame Location */ +#define PPR_TXFRAMELOCATION 0x0a00 /* Tx Frame Location */ + +/**************************************************************************** + * Public Types + ****************************************************************************/ + +/**************************************************************************** + * Public Data + ****************************************************************************/ + +#ifdef __cplusplus +#define EXTERN extern "C" +extern "C" { +#else +#define EXTERN extern +#endif + +/**************************************************************************** + * Public Function Prototypes + ****************************************************************************/ + +#undef EXTERN +#ifdef __cplusplus +} +#endif + +#endif /* __DRIVERS_NET_CS89x0_H */ diff --git a/nuttx/drivers/net/dm90x0.c b/nuttx/drivers/net/dm90x0.c index 15433e0f8..2f5b26abb 100644 --- a/nuttx/drivers/net/dm90x0.c +++ b/nuttx/drivers/net/dm90x0.c @@ -2,7 +2,7 @@ * drivers/net/dm9x.c * * Copyright (C) 2007-2010 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * Author: Gregory Nutt <gnutt@nuttx.org> * * References: Davicom data sheets (DM9000-DS-F03-041906.pdf, * DM9010-DS-F01-103006.pdf) and looking at lots of other DM90x0 diff --git a/nuttx/drivers/net/enc28j60.h b/nuttx/drivers/net/enc28j60.h index 6ca1a524d..3c787c533 100644 --- a/nuttx/drivers/net/enc28j60.h +++ b/nuttx/drivers/net/enc28j60.h @@ -2,7 +2,7 @@ * drivers/net/enc28j60.h * * Copyright (C) 2010 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * Author: Gregory Nutt <gnutt@nuttx.org> * * References: * - ENC28J60 Data Sheet, Stand-Alone Ethernet Controller with SPI Interface, diff --git a/nuttx/drivers/power/pm_activity.c b/nuttx/drivers/power/pm_activity.c index f52fc93ff..d3c8a52e7 100644 --- a/nuttx/drivers/power/pm_activity.c +++ b/nuttx/drivers/power/pm_activity.c @@ -2,7 +2,7 @@ * drivers/power/pm_activity.c * * Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions diff --git a/nuttx/drivers/sensors/Make.defs b/nuttx/drivers/sensors/Make.defs index d04e7541e..866ccb053 100644 --- a/nuttx/drivers/sensors/Make.defs +++ b/nuttx/drivers/sensors/Make.defs @@ -2,7 +2,7 @@ # drivers/sensors/Make.defs # # Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <spudmonkey@racsa.co.cr> +# Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions diff --git a/nuttx/drivers/sensors/lm75.c b/nuttx/drivers/sensors/lm75.c index 8e1a0fb4b..2d3346447 100644 --- a/nuttx/drivers/sensors/lm75.c +++ b/nuttx/drivers/sensors/lm75.c @@ -3,7 +3,7 @@ * Character driver for the STMicro LM-75 Temperature Sensor * * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions diff --git a/nuttx/drivers/sercomm/Make.defs b/nuttx/drivers/sercomm/Make.defs index 3585f5314..0cf93d4c8 100644 --- a/nuttx/drivers/sercomm/Make.defs +++ b/nuttx/drivers/sercomm/Make.defs @@ -2,7 +2,7 @@ # drivers/serial/Make.defs # # Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <spudmonkey@racsa.co.cr> +# Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions diff --git a/nuttx/drivers/usbhost/Make.defs b/nuttx/drivers/usbhost/Make.defs index cc28e874d..fd54ab53e 100644 --- a/nuttx/drivers/usbhost/Make.defs +++ b/nuttx/drivers/usbhost/Make.defs @@ -2,7 +2,7 @@ # drivers/usbhost/Make.defs # # Copyright (C) 2010-2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <spudmonkey@racsa.co.cr> +# Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions diff --git a/nuttx/drivers/usbhost/usbhost_findclass.c b/nuttx/drivers/usbhost/usbhost_findclass.c index f08aff580..3e38670cf 100644 --- a/nuttx/drivers/usbhost/usbhost_findclass.c +++ b/nuttx/drivers/usbhost/usbhost_findclass.c @@ -2,7 +2,7 @@ * drivers/usbhost/usbhost_findclass.c * * Copyright (C) 2010 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions diff --git a/nuttx/drivers/usbhost/usbhost_hidkbd.c b/nuttx/drivers/usbhost/usbhost_hidkbd.c index bb3ecad9e..e69d68e7b 100644 --- a/nuttx/drivers/usbhost/usbhost_hidkbd.c +++ b/nuttx/drivers/usbhost/usbhost_hidkbd.c @@ -2,7 +2,7 @@ * drivers/usbhost/usbhost_hidkbd.c * * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions diff --git a/nuttx/drivers/usbhost/usbhost_registerclass.c b/nuttx/drivers/usbhost/usbhost_registerclass.c index 76ef511af..f4d1b64af 100644 --- a/nuttx/drivers/usbhost/usbhost_registerclass.c +++ b/nuttx/drivers/usbhost/usbhost_registerclass.c @@ -2,7 +2,7 @@ * drivers/usbhost/usbhost_registerclass.c * * Copyright (C) 2010 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions diff --git a/nuttx/drivers/usbhost/usbhost_registry.c b/nuttx/drivers/usbhost/usbhost_registry.c index 56c03e2dc..fb2e900e2 100644 --- a/nuttx/drivers/usbhost/usbhost_registry.c +++ b/nuttx/drivers/usbhost/usbhost_registry.c @@ -2,7 +2,7 @@ * drivers/usbhost/usbhost_registry.c * * Copyright (C) 2010 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions diff --git a/nuttx/drivers/usbhost/usbhost_registry.h b/nuttx/drivers/usbhost/usbhost_registry.h index 63436af5d..759a1c66e 100644 --- a/nuttx/drivers/usbhost/usbhost_registry.h +++ b/nuttx/drivers/usbhost/usbhost_registry.h @@ -2,7 +2,7 @@ * drivers/usbhost/usbdev_registry.h * * Copyright (C) 2010 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions diff --git a/nuttx/drivers/wireless/Make.defs b/nuttx/drivers/wireless/Make.defs index ac73c8d85..f47f7666a 100644 --- a/nuttx/drivers/wireless/Make.defs +++ b/nuttx/drivers/wireless/Make.defs @@ -2,7 +2,7 @@ # drivers/wireless/Make.defs # # Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <spudmonkey@racsa.co.cr> +# Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions |