diff options
author | patacongo <patacongo@7fd9a85b-ad96-42d3-883c-3090e2eb8679> | 2012-07-22 18:56:50 +0000 |
---|---|---|
committer | patacongo <patacongo@7fd9a85b-ad96-42d3-883c-3090e2eb8679> | 2012-07-22 18:56:50 +0000 |
commit | fce36677c1495e988ba118f4721d45de5c2f42d6 (patch) | |
tree | 3031e9ab44fcd5d158aa160ee01517a0eb409a94 /nuttx | |
parent | ad37fa6505876fcfeb569ebd25b0971d5badde08 (diff) | |
download | px4-firmware-fce36677c1495e988ba118f4721d45de5c2f42d6.tar.gz px4-firmware-fce36677c1495e988ba118f4721d45de5c2f42d6.tar.bz2 px4-firmware-fce36677c1495e988ba118f4721d45de5c2f42d6.zip |
Loosen up termios interfaces to allow more flexible baud settings; remove AIX-like interfaces of last check-in
git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@4969 7fd9a85b-ad96-42d3-883c-3090e2eb8679
Diffstat (limited to 'nuttx')
-rw-r--r-- | nuttx/ChangeLog | 7 | ||||
-rw-r--r-- | nuttx/configs/lpc4330-xplorer/nsh/defconfig | 20 | ||||
-rw-r--r-- | nuttx/include/nuttx/serial/tioctl.h | 74 | ||||
-rw-r--r-- | nuttx/include/sys/str_tty.h | 100 | ||||
-rw-r--r-- | nuttx/include/termios.h | 76 | ||||
-rw-r--r-- | nuttx/lib/termios/Make.defs | 6 | ||||
-rw-r--r-- | nuttx/lib/termios/lib_cfgetispeed.c | 11 | ||||
-rw-r--r-- | nuttx/lib/termios/lib_cfgetospeed.c | 11 | ||||
-rw-r--r-- | nuttx/lib/termios/lib_cfsetispeed.c | 13 | ||||
-rw-r--r-- | nuttx/lib/termios/lib_cfsetospeed.c | 13 | ||||
-rw-r--r-- | nuttx/lib/termios/lib_getspeed.c | 118 | ||||
-rw-r--r-- | nuttx/lib/termios/lib_resetspeed.c | 109 | ||||
-rw-r--r-- | nuttx/lib/termios/lib_setspeed.c | 110 |
13 files changed, 141 insertions, 527 deletions
diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog index c92f581c0..61a3ca386 100644 --- a/nuttx/ChangeLog +++ b/nuttx/ChangeLog @@ -3039,5 +3039,12 @@ Add APIs to support setting non-standard BAUD values not supported by POSIX termios. These are non-standard interfaces but have a precedence: There are similar interfaces in AIX. + * include/sys/str_tty.h, lib/lib_setspeed.c, lib_getspeed.c, and lib_resetspeed.c: + Sigh... removed. We don't need any more almost standard interfaces. + * include/termios.h and lib/termios/*: Open the existing, standard termios + interfaces to permit some non-standard baud settings. The new termios definitions + still supports the POSIX standard except that it does not strictly enforce + baud rate settings, permitting some non-portable, but useful baud rate settings + (this is what the short-lived AIX-like interfaces would have accomplished as well). diff --git a/nuttx/configs/lpc4330-xplorer/nsh/defconfig b/nuttx/configs/lpc4330-xplorer/nsh/defconfig index 179256e3d..0fc8d93ad 100644 --- a/nuttx/configs/lpc4330-xplorer/nsh/defconfig +++ b/nuttx/configs/lpc4330-xplorer/nsh/defconfig @@ -776,6 +776,10 @@ CONFIG_FTPD_CMDBUFFERSIZE=2048 # CONFIG_MB_ASCII_ENABLED - Modbus ASCII support # CONFIG_MB_RTU_ENABLED - Modbus RTU support # CONFIG_MB_TCP_ENABLED - Modbus TCP support +# CONFIG_MB_TERMIOS - Serial driver supports termios.h interfaces (tcsetattr, +# tcflush, etc.). If this is not defined, then the terminal settings (baud, +# parity, etc.) are not configurable at runtime; serial streams will not be +# flushed when closed. # CONFIG_MB_ASCII_TIMEOUT_SEC - Character timeout value for Modbus ASCII. The # character timeout value is not fixed for Modbus ASCII and is therefore # a configuration option. It should be set to the maximum expected delay @@ -822,6 +826,7 @@ CONFIG_MODBUS=n CONFIG_MB_ASCII_ENABLED=y CONFIG_MB_RTU_ENABLED=y CONFIG_MB_TCP_ENABLED=n +CONFIG_MB_TERMIOS=n CONFIG_MB_ASCII_TIMEOUT_SEC=1 CONFIG_MB_ASCII_TIMEOUT_WAIT_BEFORE_SEND_MS=0 CONFIG_MB_FUNC_HANDLERS_MAX=16 @@ -1090,6 +1095,21 @@ CONFIG_EXAMPLE_IRQBUTTONS_MAX=0 CONFIG_EXAMPLE_BUTTONS_NAME1="SW2" # +# examples/modbus +# +# CONFIG_EXAMPLES_MODBUS_PORT, Default 0 (for /dev/ttyS0) +# CONFIG_EXAMPLES_MODBUS_BAUD, Default 38400 +# CONFIG_EXAMPLES_MODBUS_PARITY, Default MB_PAR_EVEN +# +# CONFIG_EXAMPLES_MODBUS_REG_INPUT_START, Default 1000 +# CONFIG_EXAMPLES_MODBUS_REG_INPUT_NREGS, Default 4 +# CONFIG_EXAMPLES_MODBUS_REG_HOLDING_START, Default 2000 +# CONFIG_EXAMPLES_MODBUS_REG_HOLDING_NREGS, Default 130 +# +CONFIG_EXAMPLES_MODBUS_PORT=1 +CONFIG_EXAMPLES_MODBUS_BAUD=9600 + +# # Settings for examples/usbserial # # CONFIG_EXAMPLES_USBSERIAL_INONLY diff --git a/nuttx/include/nuttx/serial/tioctl.h b/nuttx/include/nuttx/serial/tioctl.h index 6862d7453..b309ff37c 100644 --- a/nuttx/include/nuttx/serial/tioctl.h +++ b/nuttx/include/nuttx/serial/tioctl.h @@ -65,60 +65,54 @@ #define TIOCGLCKTRMIOS _TIOC(0x0009) /* Get termios lock status: FAR struct termios* */ #define TIOCSLCKTRMIOS _TIOC(0x000a) /* Set termios lock status: FAR const struct termios* */ -/* Support for AIX-style get_speed, set_speed, and reset_speed operations (see sys/str_tty.h) */ - -#define TIOCSETSPEED _TIOC(0x000b) /* Set speed, enter extended speed mode: int32_t */ -#define TIOCGETSPEED _TIOC(0x000c) /* Get speed: int32_t* */ -#define TIOCRESETSPEED _TIOC(0x000d) /* Exit extended speed mode: None */ - /* Get and Set Window Size */ -#define TIOCGWINSZ _TIOC(0x000e) /* Get window size: FAR struct winsize */ -#define TIOCSWINSZ _TIOC(0x000f) /* Set window size: FAR const struct winsize */ +#define TIOCGWINSZ _TIOC(0x000b) /* Get window size: FAR struct winsize */ +#define TIOCSWINSZ _TIOC(0x000c) /* Set window size: FAR const struct winsize */ /* Send a break */ -#define TCSBRK _TIOC(0x0010) /* Send a break: int */ -#define TCSBRKP _TIOC(0x0011) /* Send a POSIX break: int */ -#define TIOCSBRK _TIOC(0x0012) /* Turn break on: void */ -#define TIOCCBRK _TIOC(0x0013) /* Turn break off: void */ +#define TCSBRK _TIOC(0x000d) /* Send a break: int */ +#define TCSBRKP _TIOC(0x000e) /* Send a POSIX break: int */ +#define TIOCSBRK _TIOC(0x000f) /* Turn break on: void */ +#define TIOCCBRK _TIOC(0x0010) /* Turn break off: void */ /* Software flow control */ -#define TCXONC _TIOC(0x0014) /* Control flow control: int */ +#define TCXONC _TIOC(0x0011) /* Control flow control: int */ /* Buffer count and flushing */ -#define TIOCINQ _TIOC(0x0015) /* Bytes in input buffer: int */ -#define TIOCOUTQ _TIOC(0x0016) /* Bytes in output buffer: int */ -#define TCFLSH _TIOC(0x0017) /* Flush: int */ +#define TIOCINQ _TIOC(0x0012) /* Bytes in input buffer: int */ +#define TIOCOUTQ _TIOC(0x0013) /* Bytes in output buffer: int */ +#define TCFLSH _TIOC(0x0014) /* Flush: int */ /* Faking input */ -#define TIOCSTI _TIOC(0x0018) /* Insert into input: const char */ +#define TIOCSTI _TIOC(0x0015) /* Insert into input: const char */ /* Re-directing console output */ -#define TIOCCONS _TIOC(0x0019) /* Re-direct console output to device: void */ +#define TIOCCONS _TIOC(0x0016) /* Re-direct console output to device: void */ /* Controlling TTY */ -#define TIOCSCTTY _TIOC(0x001a) /* Make controlling TTY: int */ -#define TIOCNOTTY _TIOC(0x001b) /* Give up controllinog TTY: void */ +#define TIOCSCTTY _TIOC(0x0017) /* Make controlling TTY: int */ +#define TIOCNOTTY _TIOC(0x0018) /* Give up controllinog TTY: void */ /* Exclusive mode */ -#define TIOCEXCL _TIOC(0x001c) /* Put TTY in exclusive mode: void */ -#define TIOCNXCL _TIOC(0x001d) /* Disable exclusive mode: void */ +#define TIOCEXCL _TIOC(0x0019) /* Put TTY in exclusive mode: void */ +#define TIOCNXCL _TIOC(0x001a) /* Disable exclusive mode: void */ /* Line discipline */ -#define TIOCGETD _TIOC(0x001e) /* Get line discipline: FAR int */ -#define TIOCSETD _TIOC(0x001f) /* Set line discipline: FAR const int */ +#define TIOCGETD _TIOC(0x001b) /* Get line discipline: FAR int */ +#define TIOCSETD _TIOC(0x001c) /* Set line discipline: FAR const int */ /* Packet mode */ -#define TIOCPKT _TIOC(0x0020) /* Control packet mode: FAR const int */ +#define TIOCPKT _TIOC(0x001d) /* Control packet mode: FAR const int */ # define TIOCPKT_FLUSHREAD (1 << 0) /* The read queue for the terminal is flushed */ # define TIOCPKT_FLUSHWRITE (1 << 1) /* The write queue for the terminal is flushed */ @@ -129,10 +123,10 @@ /* Modem control */ -#define TIOCMGET _TIOC(0x0021) /* Get modem status bits: FAR int */ -#define TIOCMSET _TIOC(0x0022) /* Set modem status bits: FAR const int */ -#define TIOCMBIC _TIOC(0x0023) /* Clear modem bits: FAR const int */ -#define TIOCMBIS _TIOC(0x0024) /* Set modem bits: FAR const int */ +#define TIOCMGET _TIOC(0x001e) /* Get modem status bits: FAR int */ +#define TIOCMSET _TIOC(0x001f) /* Set modem status bits: FAR const int */ +#define TIOCMBIC _TIOC(0x0020) /* Clear modem bits: FAR const int */ +#define TIOCMBIS _TIOC(0x0021) /* Set modem bits: FAR const int */ # define TIOCM_LE (1 << 0) /* DSR (data set ready/line enable) */ # define TIOCM_DTR (1 << 1) /* DTR (data terminal ready) */ @@ -148,32 +142,32 @@ /* TTY shutdown */ -#define TIOCVHANGUP _TIOC(0x0025) /* Shutdown TTY: void */ +#define TIOCVHANGUP _TIOC(0x0022) /* Shutdown TTY: void */ /* Marking a line as local */ -#define TIOCGSOFTCAR _TIOC(0x0026) /* Get software carrier flag: FAR int */ -#define TIOCSSOFTCAR _TIOC(0x0027) /* Set software carrier flag: FAR const int */ +#define TIOCGSOFTCAR _TIOC(0x0023) /* Get software carrier flag: FAR int */ +#define TIOCSSOFTCAR _TIOC(0x0024) /* Set software carrier flag: FAR const int */ /* Get/set serial line info */ -#define TIOCGSERIAL _TIOC(0x0028) /* Get serial line info: FAR struct serial_struct */ -#define TIOCSSERIAL _TIOC(0x0029) /* Set serial line info: FAR const struct serial_struct */ -#define TIOCSERGETLSR _TIOC(0x002a) /* Get line status register: FAR int */ +#define TIOCGSERIAL _TIOC(0x0025) /* Get serial line info: FAR struct serial_struct */ +#define TIOCSSERIAL _TIOC(0x0026) /* Set serial line info: FAR const struct serial_struct */ +#define TIOCSERGETLSR _TIOC(0x0027) /* Get line status register: FAR int */ /* Serial events */ -#define TIOCMIWAIT _TIOC(0x002b) /* Wait for a change on serial input line(s): void */ -#define TIOCGICOUNT _TIOC(0x002c) /* Read serial port interrupt count: FAR struct serial_icounter_struct */ +#define TIOCMIWAIT _TIOC(0x0028) /* Wait for a change on serial input line(s): void */ +#define TIOCGICOUNT _TIOC(0x0029) /* Read serial port interrupt count: FAR struct serial_icounter_struct */ /* RS-485 Support */ -#define TIOCSRS485 _TIOC(0x002d) /* Set RS485 mode, arg: pointer to struct serial_rs485 */ -#define TIOCGRS485 _TIOC(0x002e) /* Get RS485 mode, arg: pointer to struct serial_rs485 */ +#define TIOCSRS485 _TIOC(0x002a) /* Set RS485 mode, arg: pointer to struct serial_rs485 */ +#define TIOCGRS485 _TIOC(0x002b) /* Get RS485 mode, arg: pointer to struct serial_rs485 */ /* Debugging */ -#define TIOCSERGSTRUCT _TIOC(0x002f) /* Get device TTY structure */ +#define TIOCSERGSTRUCT _TIOC(0x002c) /* Get device TTY structure */ /* Definitions used in struct serial_rs485 (Linux compatible) */ diff --git a/nuttx/include/sys/str_tty.h b/nuttx/include/sys/str_tty.h deleted file mode 100644 index 2ae17ef95..000000000 --- a/nuttx/include/sys/str_tty.h +++ /dev/null @@ -1,100 +0,0 @@ -/**************************************************************************** - * include/sys/str_tty.h - * - * Copyright (C) 2012 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -#ifndef __INCLUDE_SYS_STR_TTY_H -#define __INCLUDE_SYS_STR_TTY_H - -/**************************************************************************** - * Included Files - ****************************************************************************/ - -#include <stdint.h> - -/**************************************************************************** - * Pre-Processor Definitions - ****************************************************************************/ - -/**************************************************************************** - * Type Definitions - ****************************************************************************/ - -/**************************************************************************** - * Public Function Prototypes - ****************************************************************************/ - -#undef EXTERN -#if defined(__cplusplus) -#define EXTERN extern "C" -extern "C" { -#else -#define EXTERN extern -#endif - -/* These are non-standard AIX-like interfaces to simplify TTY baud rate - * operations. - * - * The baud rate functions set_speed() and get_speed() are provided to - * allow the applications to program any value of the baud rate that is - * supported by the serial driver, but that cannot be expressed using - * the termios subroutines cfsetospeed, cfsetispeed, cfgetospeed, - * and cfsgetispeed. Those subroutines are limited to the set of values - * defined termios.h. - * - * Normal mode: This is the default mode, in which a termios supported - * speed is in use. - * - * Speed-extended mode: This mode is entered by calling set_speed() with - * a non-termios supported speed at the configuration of the line. In this - * mode, all the calls to tcgetattr subroutine or TCGETS ioctl subroutine - * will have B50 in the returned termios structure. - * - * If tcsetattr() or TCSETS, TCSETAF, or TCSETAW ioctl calls the driver - * and attempts to set B50, the actual baud rate is not changed. If it - * attempts to set any other termios-supported speed, will switch back - * to the normal mode and the requested baud rate is set. Calling - * reset_speed subroutine is another way to switch back to the - * normal mode. - */ - -EXTERN int32_t get_speed(int fd); -EXTERN int set_speed(int fd, int32_t speed); -EXTERN int reset_speed(int fd); - -#undef EXTERN -#if defined(__cplusplus) -} -#endif - -#endif /* __INCLUDE_SYS_STR_TTY_H */ diff --git a/nuttx/include/termios.h b/nuttx/include/termios.h index 705a89c0f..0a4a13b45 100644 --- a/nuttx/include/termios.h +++ b/nuttx/include/termios.h @@ -110,10 +110,6 @@ #define HUPCL (1 << 6) /* Hang up on last close */ #define CLOCAL (1 << 7) /* Ignore modem status lines */ -#define CBAUD (0x1f << 8) /* Baud mask (not POSIX) */ -#define CBAUDEX (0x10 << 8) /* Extra speed mask (not POSIX) */ -#define _CBAUD_SHIFT 8 /* So that we all agree where the baud code is stored */ - /* Local Modes (c_lflag in the termios structure) */ #define ECHO (1 << 0) /* Enable echo */ @@ -142,29 +138,43 @@ #define VSUSP 8 /* SUSP character */ #define NCCS 9 /* Size of the array c_cc for control characters */ -/* Baud Rate Selection (objects of type speed_t) */ - -#define B0 0 /* Hang up */ -#define B50 1 /* 50 baud */ -#define B75 2 /* 75 baud */ -#define B110 3 /* 110 baud */ -#define B134 4 /* 134.5 baud */ -#define B150 5 /* 150 baud */ -#define B200 6 /* 200 baud */ -#define B300 7 /* 300 baud */ -#define B600 8 /* 600 baud */ -#define B1200 9 /* 1,200 baud */ -#define B1800 10 /* 1,800 baud */ -#define B2400 11 /* 2,400 baud */ -#define B4800 12 /* 4,800 baud */ -#define B9600 13 /* 9,600 baud */ -#define B19200 14 /* 19,200 baud */ -#define B38400 15 /* 38,400 baud */ -#define B57600 16 /* 57,600 baud */ -#define B115200 17 /* 115,200 baud */ -#define B230400 18 /* 230,400 baud */ -#define B460800 19 /* 460,800 baud */ -#define B921600 20 /* 921,600 baud */ +/* Baud Rate Selection (objects of type speed_t). NOTE that as a simplification + * in NuttX, the value of the baud symbol is the buad rate itself; not an encoded + * value as you will see in most implementations of termios.h. + */ + +#define B0 0 /* Hang up */ +#define B50 50 /* 50 baud */ +#define B75 75 /* 75 baud */ +#define B110 110 /* 110 baud */ +#define B134 134 /* 134.5 baud */ +#define B150 150 /* 150 baud */ +#define B200 200 /* 200 baud */ +#define B300 300 /* 300 baud */ +#define B600 600 /* 600 baud */ +#define B1200 1200 /* 1,200 baud */ +#define B1800 1800 /* 1,800 baud */ +#define B2400 2400 /* 2,400 baud */ +#define B4800 4800 /* 4,800 baud */ +#define B9600 9600 /* 9,600 baud */ +#define B19200 19200 /* 19,200 baud */ +#define B38400 38400 /* 38,400 baud */ + +#define B57600 57600 /* 57,600 baud */ +#define B115200 115200 /* 115,200 baud */ +#define B128000 128000 /* 128,000 baud */ +#define B230400 230400 /* 230,400 baud */ +#define B256000 256000 /* 256,000 baud */ +#define B460800 460800 /* 460,800 baud */ +#define B500000 500000 /* 500,000 baud */ +#define B576000 576000 /* 576,000 baud */ +#define B921600 921600 /* 921,600 baud */ +#define B1000000 1000000 /* 1,000,000 baud */ +#define B1152000 1152000 /* 1,152,000 baud */ +#define B1500000 1500000 /* 1,500,000 baud */ +#define B2000000 2000000 /* 2,000,000 baud */ +#define B2500000 2500000 /* 2,500,000 baud */ +#define B3000000 3000000 /* 3,000,000 baud */ /* Attribute Selection (used with tcsetattr()) */ @@ -191,7 +201,7 @@ /* Baud rate selection */ -typedef uint8_t speed_t; /* Used for terminal baud rates */ +typedef uint32_t speed_t; /* Used for terminal baud rates */ /* Types used within the termios structure */ @@ -202,11 +212,21 @@ typedef int cc_t; /* Used for terminal special characters */ struct termios { + /* Exposed fields defined by POSIX */ + tcflag_t c_iflag; /* Input modes */ tcflag_t c_oflag; /* Output modes */ tcflag_t c_cflag; /* Control modes */ tcflag_t c_lflag; /* Local modes */ cc_t c_cc[NCCS]; /* Control chars */ + + /* Implementation specific fields. For portability reasons, these fields + * should not be accessed directly, but rather through only through the + * cf[set|get][o|i]speed() POSIX interfaces. + */ + + speed_t c_ispeed; /* Input speed */ + speed_t c_ospeed; /* Output speed */ }; /**************************************************************************** diff --git a/nuttx/lib/termios/Make.defs b/nuttx/lib/termios/Make.defs index b16231004..194482a55 100644 --- a/nuttx/lib/termios/Make.defs +++ b/nuttx/lib/termios/Make.defs @@ -37,14 +37,8 @@ TERMIOS_SRCS = ifneq ($(CONFIG_NFILE_DESCRIPTORS),0) -# POSIX standard interfaces - TERMIOS_SRCS += lib_cfgetispeed.c lib_cfgetospeed.c lib_cfsetispeed.c TERMIOS_SRCS += lib_cfsetospeed.c lib_tcflush.c lib_tcgetattr.c TERMIOS_SRCS += lib_tcsetattr.c -# Non-standard AIX-like interfaces - -TERMIOS_SRCS += lib_getspeed.c lib_resetspeed.c lib_setspeed.c - endif diff --git a/nuttx/lib/termios/lib_cfgetispeed.c b/nuttx/lib/termios/lib_cfgetispeed.c index 9c57b094f..d7ca5f5a5 100644 --- a/nuttx/lib/termios/lib_cfgetispeed.c +++ b/nuttx/lib/termios/lib_cfgetispeed.c @@ -70,8 +70,13 @@ * This function shall return exactly the value in the termios data * structure, without interpretation. * - * NOTE: NuttX does not no control input/output baud rates independently - * This function is *identical* to cfgetospeed + * NON STANDARD BEHAVIOR. In Nuttx, the speed_t is defined to be uint32_t + * and the baud encodings of termios.h are the actual baud values + * themselves. Therefore, any baud value can be provided as the speed + * argument here. However, if you do so, your code will *NOT* be portable + * to other environments where speed_t is smaller and where the termios.h + * baud values are encoded! To avoid portability issues, use the baud + * definitions in termios.h! * * Input Parameters: * termiosp - The termiosp argument is a pointer to a termios structure. @@ -84,5 +89,5 @@ speed_t cfgetispeed(const struct termios *termios_p) { DEBUGASSERT(termios_p); - return (speed_t)((termios_p->c_cflag & CBAUD) >> _CBAUD_SHIFT); + return termios_p->c_ispeed; } diff --git a/nuttx/lib/termios/lib_cfgetospeed.c b/nuttx/lib/termios/lib_cfgetospeed.c index bc6a47bb0..89b4d619c 100644 --- a/nuttx/lib/termios/lib_cfgetospeed.c +++ b/nuttx/lib/termios/lib_cfgetospeed.c @@ -70,8 +70,13 @@ * This function shall return exactly the value in the termios data * structure, without interpretation. * - * NOTE: NuttX does not no control input/output baud rates independently - * This function is *identical* to cfgetispeed + * NON STANDARD BEHAVIOR. In Nuttx, the speed_t is defined to be uint32_t + * and the baud encodings of termios.h are the actual baud values + * themselves. Therefore, any baud value can be provided as the speed + * argument here. However, if you do so, your code will *NOT* be portable + * to other environments where speed_t is smaller and where the termios.h + * baud values are encoded! To avoid portability issues, use the baud + * definitions in termios.h! * * Input Parameters: * termiosp - The termiosp argument is a pointer to a termios structure. @@ -84,5 +89,5 @@ speed_t cfgetospeed(const struct termios *termios_p) { DEBUGASSERT(termios_p); - return (speed_t)((termios_p->c_cflag & CBAUD) >> _CBAUD_SHIFT); + return termios_p->c_ospeed; } diff --git a/nuttx/lib/termios/lib_cfsetispeed.c b/nuttx/lib/termios/lib_cfsetispeed.c index c1e3607cc..20a05e501 100644 --- a/nuttx/lib/termios/lib_cfsetispeed.c +++ b/nuttx/lib/termios/lib_cfsetispeed.c @@ -71,8 +71,13 @@ * There is no effect on the baud rates set in the hardware until a * subsequent successful call to tcsetattr() on the same termios structure. * - * NOTE: NuttX does not no control input/output baud rates independently - * This function is *identical* to cfsetospeed + * NON STANDARD BEHAVIOR. In Nuttx, the speed_t is defined to be uint32_t + * and the baud encodings of termios.h are the actual baud values + * themselves. Therefore, any baud value can be provided as the speed + * argument here. However, if you do so, your code will *NOT* be portable + * to other environments where speed_t is smaller and where the termios.h + * baud values are encoded! To avoid portability issues, use the baud + * definitions in termios.h! * * Input Parameters: * termiosp - The termiosp argument is a pointer to a termios structure. @@ -86,8 +91,6 @@ int cfsetispeed(struct termios *termios_p, speed_t speed) { DEBUGASSERT(termios_p); - - termios_p->c_cflag &= ~CBAUD; - termios_p->c_cflag |= ((tcflag_t)speed << _CBAUD_SHIFT); + termios_p->c_ispeed = speed; return OK; } diff --git a/nuttx/lib/termios/lib_cfsetospeed.c b/nuttx/lib/termios/lib_cfsetospeed.c index 662de7382..4a30699e9 100644 --- a/nuttx/lib/termios/lib_cfsetospeed.c +++ b/nuttx/lib/termios/lib_cfsetospeed.c @@ -71,8 +71,13 @@ * There is no effect on the baud rates set in the hardware until a * subsequent successful call to tcsetattr() on the same termios structure. * - * NOTE: NuttX does not no control input/output baud rates independently - * This function is *identical* to cfsetispeed + * NON STANDARD BEHAVIOR. In Nuttx, the speed_t is defined to be uint32_t + * and the baud encodings of termios.h are the actual baud values + * themselves. Therefore, any baud value can be provided as the speed + * argument here. However, if you do so, your code will *NOT* be portable + * to other environments where speed_t is smaller and where the termios.h + * baud values are encoded! To avoid portability issues, use the baud + * definitions in termios.h! * * Input Parameters: * termiosp - The termiosp argument is a pointer to a termios structure. @@ -86,8 +91,6 @@ int cfsetospeed(struct termios *termios_p, speed_t speed) { DEBUGASSERT(termios_p); - - termios_p->c_cflag &= ~CBAUD; - termios_p->c_cflag |= ((tcflag_t)speed << _CBAUD_SHIFT); + termios_p->c_ospeed = speed; return OK; } diff --git a/nuttx/lib/termios/lib_getspeed.c b/nuttx/lib/termios/lib_getspeed.c deleted file mode 100644 index dbc3686b3..000000000 --- a/nuttx/lib/termios/lib_getspeed.c +++ /dev/null @@ -1,118 +0,0 @@ -/**************************************************************************** - * lib/termios/lib_getspeed.c - * - * Copyright (C) 2012 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/**************************************************************************** - * Included Files - ****************************************************************************/ - -#include <nuttx/config.h> - -#include <sys/str_tty.h> -#include <sys/ioctl.h> - -#include <nuttx/serial/tioctl.h> - -/**************************************************************************** - * Pre-processor Definitions - ****************************************************************************/ - -/**************************************************************************** - * Private Variables - ****************************************************************************/ - -/**************************************************************************** - * Public Variables - ****************************************************************************/ - -/**************************************************************************** - * Private Functions - ****************************************************************************/ - -/**************************************************************************** - * Public Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: get_speed - * - * Descripton: - * set_speed(), get_speed(), and reset_speed are non-standard AIX-like - * interfaces to simplify TTY baud rate operations. - * - * The baud rate functions set_speed() and get_speed() are provided to - * allow the applications to program any value of the baud rate that is - * supported by the serial driver, but that cannot be expressed using - * the termios subroutines cfsetospeed, cfsetispeed, cfgetospeed, - * and cfsgetispeed. Those subroutines are limited to the set of values - * defined termios.h. - * - * Normal mode: This is the default mode, in which a termios supported - * speed is in use. - * - * Speed-extended mode: This mode is entered by calling set_speed() with - * a non-termios supported speed at the configuration of the line. In this - * mode, all the calls to tcgetattr subroutine or TCGETS ioctl subroutine - * will have B50 in the returned termios structure. - * - * If tcsetattr() or TCSETS, TCSETAF, or TCSETAW ioctl calls the driver - * and attempts to set B50, the actual baud rate is not changed. If it - * attempts to set any other termios-supported speed, will switch back - * to the normal mode and the requested baud rate is set. Calling - * reset_speed subroutine is another way to switch back to the - * normal mode. - * - * Input Parameters: - * fd - The 'fd' argument is an open file descriptor associated with a - * terminal. - * - * Returned Value: - * Upon successful completion, the extended baud is returned. Otherwise, - * -1 is returned and errno is set to indicate the error. - * - ****************************************************************************/ - -int32_t get_speed(int fd) -{ - int32_t speed; - int ret; - - ret = ioctl(fd, TIOCGETSPEED, (unsigned long)((uintptr_t)&speed)); - if (ret < 0) - { - return (int32_t)ret; - } - - return speed; -} diff --git a/nuttx/lib/termios/lib_resetspeed.c b/nuttx/lib/termios/lib_resetspeed.c deleted file mode 100644 index 8da9cdc78..000000000 --- a/nuttx/lib/termios/lib_resetspeed.c +++ /dev/null @@ -1,109 +0,0 @@ -/**************************************************************************** - * lib/termios/lib_resetspeed.c - * - * Copyright (C) 2012 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/**************************************************************************** - * Included Files - ****************************************************************************/ - -#include <nuttx/config.h> - -#include <sys/str_tty.h> -#include <sys/ioctl.h> - -#include <nuttx/serial/tioctl.h> - -/**************************************************************************** - * Pre-processor Definitions - ****************************************************************************/ - -/**************************************************************************** - * Private Variables - ****************************************************************************/ - -/**************************************************************************** - * Public Variables - ****************************************************************************/ - -/**************************************************************************** - * Private Functions - ****************************************************************************/ - -/**************************************************************************** - * Public Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: reset_speed - * - * Descripton: - * set_speed(), get_speed(), and reset_speed are non-standard AIX-like - * interfaces to simplify TTY baud rate operations. - * - * The baud rate functions set_speed() and get_speed() are provided to - * allow the applications to program any value of the baud rate that is - * supported by the serial driver, but that cannot be expressed using - * the termios subroutines cfsetospeed, cfsetispeed, cfgetospeed, - * and cfsgetispeed. Those subroutines are limited to the set of values - * defined termios.h. - * - * Normal mode: This is the default mode, in which a termios supported - * speed is in use. - * - * Speed-extended mode: This mode is entered by calling set_speed() with - * a non-termios supported speed at the configuration of the line. In this - * mode, all the calls to tcgetattr subroutine or TCGETS ioctl subroutine - * will have B50 in the returned termios structure. - * - * If tcsetattr() or TCSETS, TCSETAF, or TCSETAW ioctl calls the driver - * and attempts to set B50, the actual baud rate is not changed. If it - * attempts to set any other termios-supported speed, will switch back - * to the normal mode and the requested baud rate is set. Calling - * reset_speed subroutine is another way to switch back to the - * normal mode. - * - * Input Parameters: - * fd - The 'fd' argument is an open file descriptor associated with a terminal. - * cmd - The TCFLSH ioctl argument. - * - * Returned Value: - * Upon successful completion, 0 is returned. Otherwise, -1 is returned and - * errno is set to indicate the error. - * - ****************************************************************************/ - -int reset_speed(int fd) -{ - return ioctl(fd, TIOCRESETSPEED, 0L); -} diff --git a/nuttx/lib/termios/lib_setspeed.c b/nuttx/lib/termios/lib_setspeed.c deleted file mode 100644 index 13a0cc57a..000000000 --- a/nuttx/lib/termios/lib_setspeed.c +++ /dev/null @@ -1,110 +0,0 @@ -/**************************************************************************** - * lib/termios/lib_setspeed.c - * - * Copyright (C) 2012 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/**************************************************************************** - * Included Files - ****************************************************************************/ - -#include <nuttx/config.h> - -#include <sys/str_tty.h> -#include <sys/ioctl.h> - -#include <nuttx/serial/tioctl.h> - -/**************************************************************************** - * Pre-processor Definitions - ****************************************************************************/ - -/**************************************************************************** - * Private Variables - ****************************************************************************/ - -/**************************************************************************** - * Public Variables - ****************************************************************************/ - -/**************************************************************************** - * Private Functions - ****************************************************************************/ - -/**************************************************************************** - * Public Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: set_speed - * - * Descripton: - * set_speed(), get_speed(), and reset_speed are non-standard AIX-like - * interfaces to simplify TTY baud rate operations. - * - * The baud rate functions set_speed() and get_speed() are provided to - * allow the applications to program any value of the baud rate that is - * supported by the serial driver, but that cannot be expressed using - * the termios subroutines cfsetospeed, cfsetispeed, cfgetospeed, - * and cfsgetispeed. Those subroutines are limited to the set of values - * defined termios.h. - * - * Normal mode: This is the default mode, in which a termios supported - * speed is in use. - * - * Speed-extended mode: This mode is entered by calling set_speed() with - * a non-termios supported speed at the configuration of the line. In this - * mode, all the calls to tcgetattr subroutine or TCGETS ioctl subroutine - * will have B50 in the returned termios structure. - * - * If tcsetattr() or TCSETS, TCSETAF, or TCSETAW ioctl calls the driver - * and attempts to set B50, the actual baud rate is not changed. If it - * attempts to set any other termios-supported speed, will switch back - * to the normal mode and the requested baud rate is set. Calling - * reset_speed subroutine is another way to switch back to the - * normal mode. - * - * Input Parameters: - * fd - The 'fd' argument is an open file descriptor associated with a - * terminal. - * speed - The new, extended baud - * - * Returned Value: - * Upon successful completion, 0 is returned. Otherwise, -1 is returned and - * errno is set to indicate the error. - * - ****************************************************************************/ - -int set_speed(int fd, int32_t speed) -{ - return ioctl(fd, TIOCSETSPEED, (unsigned long)speed); -} |