diff options
author | patacongo <patacongo@7fd9a85b-ad96-42d3-883c-3090e2eb8679> | 2012-08-20 12:44:15 +0000 |
---|---|---|
committer | patacongo <patacongo@7fd9a85b-ad96-42d3-883c-3090e2eb8679> | 2012-08-20 12:44:15 +0000 |
commit | 6211f4726edd588fa2381201443bc5da8589c5ed (patch) | |
tree | 0ca0ca4487e15b8e900ce9a4e76bfa5bc65c32cd /nuttx | |
parent | c3f866cc2c446a03e034f234c141722360e4b266 (diff) | |
download | px4-firmware-6211f4726edd588fa2381201443bc5da8589c5ed.tar.gz px4-firmware-6211f4726edd588fa2381201443bc5da8589c5ed.tar.bz2 px4-firmware-6211f4726edd588fa2381201443bc5da8589c5ed.zip |
CONFIG_DRAM_END configuration change from Richard Cochran
git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@5038 7fd9a85b-ad96-42d3-883c-3090e2eb8679
Diffstat (limited to 'nuttx')
171 files changed, 467 insertions, 836 deletions
diff --git a/nuttx/configs/amber/README.txt b/nuttx/configs/amber/README.txt index e91ea3811..9ef22917e 100644 --- a/nuttx/configs/amber/README.txt +++ b/nuttx/configs/amber/README.txt @@ -413,10 +413,6 @@ Amber Web Server Configuration Options CONFIG_DRAM_START=0x800100 - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that have LEDs diff --git a/nuttx/configs/amber/hello/defconfig b/nuttx/configs/amber/hello/defconfig index 2b56cc003..828c2fbdc 100644 --- a/nuttx/configs/amber/hello/defconfig +++ b/nuttx/configs/amber/hello/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_NOINTC - define if the architecture does not # support an interrupt controller or otherwise cannot support # APIs like up_enable_irq() and up_disable_irq(). @@ -82,7 +81,6 @@ CONFIG_ARCH_BOARD_AMBER=y CONFIG_BOARD_LOOPSPERMSEC=800 CONFIG_DRAM_SIZE=4096 CONFIG_DRAM_START=0x800100 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_NOINTC=y CONFIG_ARCH_IRQPRIO=n CONFIG_ARCH_INTERRUPTSTACK=n diff --git a/nuttx/configs/avr32dev1/README.txt b/nuttx/configs/avr32dev1/README.txt index fcd2d9727..68d019227 100755 --- a/nuttx/configs/avr32dev1/README.txt +++ b/nuttx/configs/avr32dev1/README.txt @@ -1,450 +1,446 @@ -README
-^^^^^^
-
-This is the README file for the NuttX port to the Atmel AVR32DEV1 board.
-
-Contents
-^^^^^^^^
-
- * GPIO Pin Configuration
- * Serial Connection
- * Toolchains
- * Development Environment
- * GNU Toolchains
- * IDEs
- - Makefile Build
- - Native Build
- * AVR32 Bootloader
- - Boot Sequence
- - Link Address
- - Entering the ISP
- - BatchISP
- * Reset
- * Make Tip
- * AVR32DEV1 Configuration Options
- * Configurations
-
-GPIO Pin Configuration
-^^^^^^^^^^^^^^^^^^^^^^
-
-The only GPIO pin usage is for LEDs (2) and Buttons (2):
-
- PIN 13 PA7 LED1
- PIN 14 PA8 LED2
- PIN 24 PB2 KEY1
- PIN 25 PB3 KEY2
-
-(See configs/avr32dev/src/avr32dev_internal.h). And also for
-crystals (4), JTAG (1), and USB (1):
-
- PIN 30 PA11 XIN32
- PIN 31 PA12 XOUT32
- PIN 35 PA15 EVTO (JTAG)
- PIN 39 PA18 X1IN
- PIN 40 PA19 X1OUT
- PIN 61 PA26 ID (USB)
-
-All GPIO pins are brought out through connectors J1 (PINS 33-64)
-and J2 (PINS 1-32).
-
-NOTE: There seems to be some difference in labeling for OSC0 and
-OSC1 between MCUZone.com and Atmel:
-
- Oscillator pinout
- -------------------------- --------------------
- QFP48 QFP64 Pad Oscillator AVR32DEV1
- PIN PIN PIN LABEL
- ----- ----- ---- --------- --------------------
- 30 39 PA18 XIN0 X1IN (12MHz)
- 41 PA28 XIN1 PA28 (no crystal)
- 22 30 PA11 XIN32 XIN32 (32KHz)
- 31 40 PA19 XOUT0 X1OUT (12Mhz)
- 42 PA29 XOUT1 PA29 (no crystal)
- 23 31 PA12 XOUT32 XOUT32 (32 Khz)
- ----- ----- ---- --------- --------------------
-
-NOTE 1: These crystal inputs/outputs are analog signals and my
-assumption is that they need no pin multiplexing setting to
-enable them for the external crystal function.
-
-NOTE 2: There is no support for OSC1.
-
-NOTE 3: There are solder pads for the 32KHz OSC32, but the
-crystal is not populated on my board. Therefore, the RTC will
-have to run from the (uncalibrated) RCOSC.
-
-Serial Connection
-^^^^^^^^^^^^^^^^^
-
-USART1 is the default USART1 used in the configuration files to
-provide a serial console (of course, that can be easily changed
-by editting the configuration file). The AVR32DEV1 board has no
-RS-232 drivers or connectors on board. I use an off-board MAX232
-module that I got on eBay (search for MAX232 if you want to find
-one). I connect the MAX232 board as follows:
-
-In configs/avr32dev/include/board.h:
-
- #define PINMUX_USART1_RXD PINMUX_USART1_RXD_1
- #define PINMUX_USART1_TXD PINMUX_USART1_TXD_1
-
-In arch/avr/src/at32uc3/at32uc3b_pinmux.h:
-
- #define PINMUX_USART1_RXD_1 (GPIO_PERIPH | GPIO_FUNCD | GPIO_PORTA | 17)
- #define PINMUX_USART1_TXD_1 (GPIO_PERIPH | GPIO_FUNCA | GPIO_PORTA | 23)
-
-PA17 and PA23 are avaiable from the AVR32DEV1:
-
- FUNC GPIO PIN Header 16X2 (J1) MX232 Board
- ---- ----- ----- ---------------- ------------
- RXD PA17 PIN37 Pin 5 PIN4 RXD (5V TTL/CMOS)
- TXD PA23 PIN47 Pin 15 PIN3 TXD (5V TTL/CMOS)
- PIN2 GND
- PIN1 VCC (5V)
-
- Voltage on GPIO Pins with respect to Ground for TCK, RESET_N, PA03-PA08,
- PA11-PA12, PA18-PA19, PA28-PA31............................-0.3 to 3.6V
- Other Pins ............................................... -0.3 to 5.5V
-
- I get the 5V from another USB port (using the 5V power cable that normally
- provides the extra current needed by my USB IDE drive).
-
-Development Environment
-^^^^^^^^^^^^^^^^^^^^^^^
-
- Either Linux or Cygwin on Windows can be used for the development environment.
- The source has been built only using the GNU toolchain (see below). Other
- toolchains will likely cause problems. Testing was performed using the Cygwin
- environment.
-
-GNU Toolchains
-^^^^^^^^^^^^^^
-
-Atmel Toolchain:
-
- The build logic in these directories assume that you are using the GNU
- toolchain with the Atmel patches. The patch file, pre-patched tool
- sources,and pre-built binaries are available from the Atmel website.
-
- CONFIG_AVR32_AVRTOOLSW=y # Use the windows version
- CONFIG_AVR32_AVRTOOLSL=y # Ue the Linux version
-
- NOTE: The NuttX builtroot cannot be used to build the AVR32 toolchain.
- This is because the Atmel patches that add support for the AVR32 are not
- included in the NuttX buildroot.
-
-WinAVR:
-
- Another option for use under Windows is WinAVR:
- http://sourceforge.net/projects/winavr/files/. WinAVR includes the
- AVR32 toolchain as well as the AVR toolchain and various support
- libraries and header files.
-
-IDEs
-^^^^
-
- NuttX is built using command-line make. It can be used with an IDE, but some
- effort will be required to create the project.
-
- Makefile Build
- --------------
- Under Eclipse, it is pretty easy to set up an "empty makefile project" and
- simply use the NuttX makefile to build the system. That is almost for free
- under Linux. Under Windows, you will need to set up the "Cygwin GCC" empty
- makefile project in order to work with Windows (Google for "Eclipse Cygwin" -
- there is a lot of help on the internet).
-
- Native Build
- ------------
- Here are a few tips before you start that effort:
-
- 1) Select the toolchain that you will be using in your .config file
- 2) Start the NuttX build at least one time from the Cygwin command line
- before trying to create your project. This is necessary to create
- certain auto-generated files and directories that will be needed.
- 3) Set up include pathes: You will need include/, arch/avr/src/at32uc3,
- arch/avr/src/common, arch/arm/src/avr, and sched/.
- 4) All assembly files need to have the definition option -D __ASSEMBLY__
- on the command line.
-
- Startup files will probably cause you some headaches. The NuttX startup file
- is arch/avr/src/avr3/up_nommuhead.S.
-
-AVR32 Bootloader
-^^^^^^^^^^^^^^^^
-
- Boot Sequence
- -------------
-
- "An AVR UC3 part having the bootloader programmed resets as any other
- part at 80000000h. Bootloader execution begins here. The bootloader
- first performs the boot process to know whether it should start the
- USB DFU ISP or the application. If the tested conditions indicate
- that the USB DFU ISP should be started, then execution continues in
- the bootloader area, i.e. between 80000000h and 80002000h, else
- the bootloader launches the application at 80002000h."
-
- Link Address
- ------------
-
- The linker scripts (ld.script) assume that you are using the DFU
- bootloader. The bootloader resides at 0x8000:0000 and so the ld.script
- files link the application to execute after the bootloader at
- 0x8000:2000. To link so that NuttX boots directly without using the
- bootloader, change the flash definition from:
-
- flash (rxai!w) : ORIGIN = 0x80002000, LENGTH = 256K - 8K
-
- to:
- flash (rxai!w) : ORIGIN = 0x80000000, LENGTH = 256K
-
- Or to use the MSC bootloader:
-
- flash (rxai!w) : ORIGIN = 0x80008000, LENGTH = 256K - 32K
-
- Entering the ISP
- ----------------
-
- In order to use the USB port to download the FLASH(ISP), you need to
- use the S3(PA13) to make CPU return to boot status. In this mode, the
- on chip bootloader will run, making the ISP possible.
-
- BatchISP
- --------
-
- Unlike other Atmel parts, the AVR32 will not work with the FLIP GUI
- program. Instead, you must use the command-line loader call BatchISP.
- If need to download FLIP from the atmel.com website, install the USB
- driver in the FLIP usb directory. Then in the bin directory where
- you installed FLIP, you will also find batchisp.exe.
-
- NOTE: The AVR32DEV1 setenv.sh files will add the path to the BatchISP
- bin directory to the Cygwin PATH variable. If you use a different
- version of FLIP or if you install FLIP in a different location, you
- will need to modify the setenv.sh files.
-
- Notes from "AVR32 UC3 USB DFU Bootloader" (doc7745.pdf)
-
- "To launch BatchISP, open a command prompt. Windows or Cygwin command
- prompt can be used provided that the bin folder of the FLIP installation
- directory is in the PATH (Windows’ or Cygwin’s) environment variable.
- When running BatchISP on AT32UC3xxxxx, the target part has to be specified
- with -device at32uc3xxxxx and the communication port with -hardware usb.
- Commands can then be placed after -operation. These commands are executed
- in order. BatchISP options can be placed in a text file invoked using
- -cmdfile rather than on the command line.
-
- "BatchISP works with an internal ISP buffer per target memory. These ISP
- buffers can be filled from several sources. All target operations (program,
- verify, read) are performed using these buffers."
-
- The following BatchISP command line will erase FLASH, write the nuttx binary
- into FLASH, and reset the AVR32. This command line is available in the
- script config/avr32dev1/tools/doisp.sh:
-
- batchisp -device at32uc3b0256 -hardware usb -operation erase f memory flash \
- blankcheck loadbuffer nuttx.elf program verify start reset 0
-
- "BatchISP main commands available on AT32UC3xxxxx are:
-
- - ASSERT { PASS | FAIL } changes the displayed results of the following
- operations according to the expected behavior.
- - ONFAIL { ASK | ABORT | RETRY | IGNORE } changes the interactive behavior
- of BatchISP in case of failure.
- - WAIT <Nsec> inserts a pause between two ISP operations.
- - ECHO <comment> displays a message.
- - ERASE F erases internal flash contents, except the bootloader.
- - MEMORY { FLASH | SECURITY | CONFIGURATION | BOOTLOADER | SIGNATURE | USER }
- selects a target memory on which to apply the following operations.
- - ADDRANGE <addrMin> <addrMax> selects in the current target memory an
- address range on which to apply the following operations.
- - BLANKCHECK checks that the selected address range is erased.
- - FILLBUFFER <data> fills the ISP buffer with a byte value.
- - LOADBUFFER { <in_elffile> | <in_hexfile> } loads the ISP buffer from an
- input file.
- - PROGRAM programs the selected address range with the ISP buffer.
- - VERIFY verifies that the selected address range has the same contents
- as the ISP buffer.
- - READ reads the selected address range to the ISP buffer.
- - SAVEBUFFER <out_hexfile> { HEX386 | HEX86 } saves the ISP buffer to an
- output file.
- - START { RESET | NORESET } 0 starts the execution of the programmed
- application with an optional hardware reset of the target.
-
- "The AT32UC3xxxxx memories made available by BatchISP are:
-
- - FLASH: This memory is the internal flash array of the target, including the
- bootloader protected area. E.g. on AT32UC3A0512 (512-kB internal flash),
- addresses from 0 to 0x7FFFF can be accessed in this memory.
- - SECURITY: This memory contains only one byte. The least significant bit
- of this byte reflects the value of the target Security bit which can only
- be set to 1. Once set, the only accepted commands will be ERASE and START.
- After an ERASE command, all commands are accepted until the end of the
- non-volatile ISP session, even if the Security bit is set.
- - CONFIGURATION: This memory contains one byte per target general-purpose
- fuse bit. The least significant bit of each byte reflects the value of
- the corresponding GP fuse bit.
- - BOOTLOADER: This memory contains three bytes concerning the ISP: the ISP
- version in BCD format without the major version number (always 1), the
- ISP ID0 and the ISP ID1.
- - SIGNATURE: This memory contains four bytes concerning the part: the product
- manufacturer ID, the product family ID, the product ID and the product
- revision.
- - USER: This memory is the internal flash User page of the target, with
- addresses from 0 to 0x1FF.
-
- "For further details about BatchISP commands, launch batchisp -h or see the
- help files installed with FLIP ..."
-
-Reset
-^^^^^
-
- I don't trust the reset button -- if you reset and something weird happens,
- try a full power cycle.
-
-Make Tip
-^^^^^^^^
-
- Because this build uses a native Windows toolchain and the native Windows
- tools do not understand Cygwin's symbolic links, the NuttX make system does
- something weird: It copies the configuration directories instead of linking
- to them (it could, perhaps, use the NTFS 'mklink' command, but it doesn't).
-
- A consequence of this is that you can easily get confused when you edit
- a file in one of the "linked" directories, re-build NuttX, and then not see your
- changes when you run the program. That is because build is still using the
- version of the file in the copied directory, not your modified file! To work
- around this annoying behavior, do the following when you re-build:
-
- make clean_context all <-- Remove and re-copy all of the directories, then make all
- doisp.sh <-- Load the code onto the board.
-
-AVR32DEV1 Configuration Options
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
- CONFIG_ARCH - Identifies the arch/ subdirectory. This should
- be set to:
-
- CONFIG_ARCH=avr
-
- CONFIG_ARCH_family - For use in C code:
-
- CONFIG_ARCH_AVR=y
-
- CONFIG_ARCH_architecture - For use in C code:
-
- CONFIG_ARCH_AVR32=y
-
- CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
-
- CONFIG_ARCH_CHIP=at32uc3
-
- CONFIG_ARCH_CHIP_name - For use in C code to identify the exact
- chip:
-
- CONFIG_ARCH_CHIP_AT32UC3B0256
-
- CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
- hence, the board that supports the particular chip or SoC.
-
- CONFIG_ARCH_BOARD=avr32dev1 (for the AV32DEV1 board)
-
- CONFIG_ARCH_BOARD_name - For use in C code
-
- CONFIG_ARCH_BOARD_AVR32DEV1
-
- CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation
- of delay loops
-
- CONFIG_ENDIAN_BIG - define if big endian (default is little
- endian)
-
- CONFIG_DRAM_SIZE - Describes the installed DRAM (SRAM in this case):
-
- CONFIG_DRAM_SIZE=0x00010000 (64Kb)
-
- CONFIG_DRAM_START - The start address of installed DRAM
-
- CONFIG_DRAM_START=0x20000000
-
- CONFIG_DRAM_END - Last address+1 of installed RAM
-
- CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
-
- CONFIG_ARCH_IRQPRIO - The AT32UC3B0256 supports interrupt prioritization
-
- CONFIG_ARCH_IRQPRIO=y
-
- CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
- have LEDs
-
- CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
- stack. If defined, this symbol is the size of the interrupt
- stack in bytes. If not defined, the user task stacks will be
- used during interrupt handling.
-
- CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
-
- CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
-
- CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
- cause a 100 second delay during boot-up. This 100 second delay
- serves no purpose other than it allows you to calibratre
- CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure
- the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
- the delay actually is 100 seconds.
-
- Individual subsystems can be enabled:
-
- CONFIG_AVR32_GPIOIRQ - GPIO interrupt support
- CONFIG_AVR32_GPIOIRQSETA - Set of GPIOs on PORTA that support interrupts
- CONFIG_AVR32_GPIOIRQSETB - Set of GPIOs on PORTB that support interrupts
-
- CONFIG_AVR32_USARTn - Enable support for USARTn
- CONFIG_AVR32_USARTn_RS232 - Configure USARTn as an RS232 interface.
- CONFIG_AVR32_USARTn_SPI - Configure USARTn as an SPI interface.
- CONFIG_AVR32_USARTn_RS485 - Configure USARTn as an RS485 interface.
- CONFIG_AVR32_USARTn_MAN - Configure USARTn as an Manchester interface.
- CONFIG_AVR32_USARTn_MODEM - Configure USARTn as an Modem interface.
- CONFIG_AVR32_USARTn_IRDA - Configure USARTn as an IRDA interface.
- CONFIG_AVR32_USARTn_ISO786 - Configure USARTn as an ISO786 interface.
-
- AT32UC3B0256 specific device driver settings
-
- CONFIG_USARTn_SERIAL_CONSOLE - selects the USARTn for the
- console and ttys0 (default is the USART0).
- CONFIG_USARTn_RXBUFSIZE - Characters are buffered as received.
- This specific the size of the receive buffer
- CONFIG_USARTn_TXBUFSIZE - Characters are buffered before
- being sent. This specific the size of the transmit buffer
- CONFIG_USARTn_BAUD - The configure BAUD of the USART. Must be
- CONFIG_USARTn_BITS - The number of bits. Must be either 7 or 8.
- CONFIG_USARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
- CONFIG_USARTn_2STOP - Two stop bits
-
-Configurations
-^^^^^^^^^^^^^^
-
-Each Stellaris LM3S6965 Evaluation Kit configuration is maintained in a
-sudirectory and can be selected as follow:
-
- cd tools
- ./configure.sh avr32dev1/<subdir>
- cd -
- . ./setenv.sh
-
-Where <subdir> is one of the following:
-
- nsh:
- Configures the NuttShell (nsh) located at examples/nsh. The
- Configuration enables only the serial NSH interface.
-
- ostest:
- This configuration directory, performs a simple OS test using
- examples/ostest.
-
- NOTE: Round-robin scheduling is disabled in this test because
- the RR test in examples/ostest declares data structures that
- are too large for the poor little uc3 SRAM.
-
-
+README +^^^^^^ + +This is the README file for the NuttX port to the Atmel AVR32DEV1 board. + +Contents +^^^^^^^^ + + * GPIO Pin Configuration + * Serial Connection + * Toolchains + * Development Environment + * GNU Toolchains + * IDEs + - Makefile Build + - Native Build + * AVR32 Bootloader + - Boot Sequence + - Link Address + - Entering the ISP + - BatchISP + * Reset + * Make Tip + * AVR32DEV1 Configuration Options + * Configurations + +GPIO Pin Configuration +^^^^^^^^^^^^^^^^^^^^^^ + +The only GPIO pin usage is for LEDs (2) and Buttons (2): + + PIN 13 PA7 LED1 + PIN 14 PA8 LED2 + PIN 24 PB2 KEY1 + PIN 25 PB3 KEY2 + +(See configs/avr32dev/src/avr32dev_internal.h). And also for +crystals (4), JTAG (1), and USB (1): + + PIN 30 PA11 XIN32 + PIN 31 PA12 XOUT32 + PIN 35 PA15 EVTO (JTAG) + PIN 39 PA18 X1IN + PIN 40 PA19 X1OUT + PIN 61 PA26 ID (USB) + +All GPIO pins are brought out through connectors J1 (PINS 33-64) +and J2 (PINS 1-32). + +NOTE: There seems to be some difference in labeling for OSC0 and +OSC1 between MCUZone.com and Atmel: + + Oscillator pinout + -------------------------- -------------------- + QFP48 QFP64 Pad Oscillator AVR32DEV1 + PIN PIN PIN LABEL + ----- ----- ---- --------- -------------------- + 30 39 PA18 XIN0 X1IN (12MHz) + 41 PA28 XIN1 PA28 (no crystal) + 22 30 PA11 XIN32 XIN32 (32KHz) + 31 40 PA19 XOUT0 X1OUT (12Mhz) + 42 PA29 XOUT1 PA29 (no crystal) + 23 31 PA12 XOUT32 XOUT32 (32 Khz) + ----- ----- ---- --------- -------------------- + +NOTE 1: These crystal inputs/outputs are analog signals and my +assumption is that they need no pin multiplexing setting to +enable them for the external crystal function. + +NOTE 2: There is no support for OSC1. + +NOTE 3: There are solder pads for the 32KHz OSC32, but the +crystal is not populated on my board. Therefore, the RTC will +have to run from the (uncalibrated) RCOSC. + +Serial Connection +^^^^^^^^^^^^^^^^^ + +USART1 is the default USART1 used in the configuration files to +provide a serial console (of course, that can be easily changed +by editting the configuration file). The AVR32DEV1 board has no +RS-232 drivers or connectors on board. I use an off-board MAX232 +module that I got on eBay (search for MAX232 if you want to find +one). I connect the MAX232 board as follows: + +In configs/avr32dev/include/board.h: + + #define PINMUX_USART1_RXD PINMUX_USART1_RXD_1 + #define PINMUX_USART1_TXD PINMUX_USART1_TXD_1 + +In arch/avr/src/at32uc3/at32uc3b_pinmux.h: + + #define PINMUX_USART1_RXD_1 (GPIO_PERIPH | GPIO_FUNCD | GPIO_PORTA | 17) + #define PINMUX_USART1_TXD_1 (GPIO_PERIPH | GPIO_FUNCA | GPIO_PORTA | 23) + +PA17 and PA23 are avaiable from the AVR32DEV1: + + FUNC GPIO PIN Header 16X2 (J1) MX232 Board + ---- ----- ----- ---------------- ------------ + RXD PA17 PIN37 Pin 5 PIN4 RXD (5V TTL/CMOS) + TXD PA23 PIN47 Pin 15 PIN3 TXD (5V TTL/CMOS) + PIN2 GND + PIN1 VCC (5V) + + Voltage on GPIO Pins with respect to Ground for TCK, RESET_N, PA03-PA08, + PA11-PA12, PA18-PA19, PA28-PA31............................-0.3 to 3.6V + Other Pins ............................................... -0.3 to 5.5V + + I get the 5V from another USB port (using the 5V power cable that normally + provides the extra current needed by my USB IDE drive). + +Development Environment +^^^^^^^^^^^^^^^^^^^^^^^ + + Either Linux or Cygwin on Windows can be used for the development environment. + The source has been built only using the GNU toolchain (see below). Other + toolchains will likely cause problems. Testing was performed using the Cygwin + environment. + +GNU Toolchains +^^^^^^^^^^^^^^ + +Atmel Toolchain: + + The build logic in these directories assume that you are using the GNU + toolchain with the Atmel patches. The patch file, pre-patched tool + sources,and pre-built binaries are available from the Atmel website. + + CONFIG_AVR32_AVRTOOLSW=y # Use the windows version + CONFIG_AVR32_AVRTOOLSL=y # Ue the Linux version + + NOTE: The NuttX builtroot cannot be used to build the AVR32 toolchain. + This is because the Atmel patches that add support for the AVR32 are not + included in the NuttX buildroot. + +WinAVR: + + Another option for use under Windows is WinAVR: + http://sourceforge.net/projects/winavr/files/. WinAVR includes the + AVR32 toolchain as well as the AVR toolchain and various support + libraries and header files. + +IDEs +^^^^ + + NuttX is built using command-line make. It can be used with an IDE, but some + effort will be required to create the project. + + Makefile Build + -------------- + Under Eclipse, it is pretty easy to set up an "empty makefile project" and + simply use the NuttX makefile to build the system. That is almost for free + under Linux. Under Windows, you will need to set up the "Cygwin GCC" empty + makefile project in order to work with Windows (Google for "Eclipse Cygwin" - + there is a lot of help on the internet). + + Native Build + ------------ + Here are a few tips before you start that effort: + + 1) Select the toolchain that you will be using in your .config file + 2) Start the NuttX build at least one time from the Cygwin command line + before trying to create your project. This is necessary to create + certain auto-generated files and directories that will be needed. + 3) Set up include pathes: You will need include/, arch/avr/src/at32uc3, + arch/avr/src/common, arch/arm/src/avr, and sched/. + 4) All assembly files need to have the definition option -D __ASSEMBLY__ + on the command line. + + Startup files will probably cause you some headaches. The NuttX startup file + is arch/avr/src/avr3/up_nommuhead.S. + +AVR32 Bootloader +^^^^^^^^^^^^^^^^ + + Boot Sequence + ------------- + + "An AVR UC3 part having the bootloader programmed resets as any other + part at 80000000h. Bootloader execution begins here. The bootloader + first performs the boot process to know whether it should start the + USB DFU ISP or the application. If the tested conditions indicate + that the USB DFU ISP should be started, then execution continues in + the bootloader area, i.e. between 80000000h and 80002000h, else + the bootloader launches the application at 80002000h." + + Link Address + ------------ + + The linker scripts (ld.script) assume that you are using the DFU + bootloader. The bootloader resides at 0x8000:0000 and so the ld.script + files link the application to execute after the bootloader at + 0x8000:2000. To link so that NuttX boots directly without using the + bootloader, change the flash definition from: + + flash (rxai!w) : ORIGIN = 0x80002000, LENGTH = 256K - 8K + + to: + flash (rxai!w) : ORIGIN = 0x80000000, LENGTH = 256K + + Or to use the MSC bootloader: + + flash (rxai!w) : ORIGIN = 0x80008000, LENGTH = 256K - 32K + + Entering the ISP + ---------------- + + In order to use the USB port to download the FLASH(ISP), you need to + use the S3(PA13) to make CPU return to boot status. In this mode, the + on chip bootloader will run, making the ISP possible. + + BatchISP + -------- + + Unlike other Atmel parts, the AVR32 will not work with the FLIP GUI + program. Instead, you must use the command-line loader call BatchISP. + If need to download FLIP from the atmel.com website, install the USB + driver in the FLIP usb directory. Then in the bin directory where + you installed FLIP, you will also find batchisp.exe. + + NOTE: The AVR32DEV1 setenv.sh files will add the path to the BatchISP + bin directory to the Cygwin PATH variable. If you use a different + version of FLIP or if you install FLIP in a different location, you + will need to modify the setenv.sh files. + + Notes from "AVR32 UC3 USB DFU Bootloader" (doc7745.pdf) + + "To launch BatchISP, open a command prompt. Windows or Cygwin command + prompt can be used provided that the bin folder of the FLIP installation + directory is in the PATH (Windows’ or Cygwin’s) environment variable. + When running BatchISP on AT32UC3xxxxx, the target part has to be specified + with -device at32uc3xxxxx and the communication port with -hardware usb. + Commands can then be placed after -operation. These commands are executed + in order. BatchISP options can be placed in a text file invoked using + -cmdfile rather than on the command line. + + "BatchISP works with an internal ISP buffer per target memory. These ISP + buffers can be filled from several sources. All target operations (program, + verify, read) are performed using these buffers." + + The following BatchISP command line will erase FLASH, write the nuttx binary + into FLASH, and reset the AVR32. This command line is available in the + script config/avr32dev1/tools/doisp.sh: + + batchisp -device at32uc3b0256 -hardware usb -operation erase f memory flash \ + blankcheck loadbuffer nuttx.elf program verify start reset 0 + + "BatchISP main commands available on AT32UC3xxxxx are: + + - ASSERT { PASS | FAIL } changes the displayed results of the following + operations according to the expected behavior. + - ONFAIL { ASK | ABORT | RETRY | IGNORE } changes the interactive behavior + of BatchISP in case of failure. + - WAIT <Nsec> inserts a pause between two ISP operations. + - ECHO <comment> displays a message. + - ERASE F erases internal flash contents, except the bootloader. + - MEMORY { FLASH | SECURITY | CONFIGURATION | BOOTLOADER | SIGNATURE | USER } + selects a target memory on which to apply the following operations. + - ADDRANGE <addrMin> <addrMax> selects in the current target memory an + address range on which to apply the following operations. + - BLANKCHECK checks that the selected address range is erased. + - FILLBUFFER <data> fills the ISP buffer with a byte value. + - LOADBUFFER { <in_elffile> | <in_hexfile> } loads the ISP buffer from an + input file. + - PROGRAM programs the selected address range with the ISP buffer. + - VERIFY verifies that the selected address range has the same contents + as the ISP buffer. + - READ reads the selected address range to the ISP buffer. + - SAVEBUFFER <out_hexfile> { HEX386 | HEX86 } saves the ISP buffer to an + output file. + - START { RESET | NORESET } 0 starts the execution of the programmed + application with an optional hardware reset of the target. + + "The AT32UC3xxxxx memories made available by BatchISP are: + + - FLASH: This memory is the internal flash array of the target, including the + bootloader protected area. E.g. on AT32UC3A0512 (512-kB internal flash), + addresses from 0 to 0x7FFFF can be accessed in this memory. + - SECURITY: This memory contains only one byte. The least significant bit + of this byte reflects the value of the target Security bit which can only + be set to 1. Once set, the only accepted commands will be ERASE and START. + After an ERASE command, all commands are accepted until the end of the + non-volatile ISP session, even if the Security bit is set. + - CONFIGURATION: This memory contains one byte per target general-purpose + fuse bit. The least significant bit of each byte reflects the value of + the corresponding GP fuse bit. + - BOOTLOADER: This memory contains three bytes concerning the ISP: the ISP + version in BCD format without the major version number (always 1), the + ISP ID0 and the ISP ID1. + - SIGNATURE: This memory contains four bytes concerning the part: the product + manufacturer ID, the product family ID, the product ID and the product + revision. + - USER: This memory is the internal flash User page of the target, with + addresses from 0 to 0x1FF. + + "For further details about BatchISP commands, launch batchisp -h or see the + help files installed with FLIP ..." + +Reset +^^^^^ + + I don't trust the reset button -- if you reset and something weird happens, + try a full power cycle. + +Make Tip +^^^^^^^^ + + Because this build uses a native Windows toolchain and the native Windows + tools do not understand Cygwin's symbolic links, the NuttX make system does + something weird: It copies the configuration directories instead of linking + to them (it could, perhaps, use the NTFS 'mklink' command, but it doesn't). + + A consequence of this is that you can easily get confused when you edit + a file in one of the "linked" directories, re-build NuttX, and then not see your + changes when you run the program. That is because build is still using the + version of the file in the copied directory, not your modified file! To work + around this annoying behavior, do the following when you re-build: + + make clean_context all <-- Remove and re-copy all of the directories, then make all + doisp.sh <-- Load the code onto the board. + +AVR32DEV1 Configuration Options +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + CONFIG_ARCH - Identifies the arch/ subdirectory. This should + be set to: + + CONFIG_ARCH=avr + + CONFIG_ARCH_family - For use in C code: + + CONFIG_ARCH_AVR=y + + CONFIG_ARCH_architecture - For use in C code: + + CONFIG_ARCH_AVR32=y + + CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory + + CONFIG_ARCH_CHIP=at32uc3 + + CONFIG_ARCH_CHIP_name - For use in C code to identify the exact + chip: + + CONFIG_ARCH_CHIP_AT32UC3B0256 + + CONFIG_ARCH_BOARD - Identifies the configs subdirectory and + hence, the board that supports the particular chip or SoC. + + CONFIG_ARCH_BOARD=avr32dev1 (for the AV32DEV1 board) + + CONFIG_ARCH_BOARD_name - For use in C code + + CONFIG_ARCH_BOARD_AVR32DEV1 + + CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation + of delay loops + + CONFIG_ENDIAN_BIG - define if big endian (default is little + endian) + + CONFIG_DRAM_SIZE - Describes the installed DRAM (SRAM in this case): + + CONFIG_DRAM_SIZE=0x00010000 (64Kb) + + CONFIG_DRAM_START - The start address of installed DRAM + + CONFIG_DRAM_START=0x20000000 + + CONFIG_ARCH_IRQPRIO - The AT32UC3B0256 supports interrupt prioritization + + CONFIG_ARCH_IRQPRIO=y + + CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that + have LEDs + + CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt + stack. If defined, this symbol is the size of the interrupt + stack in bytes. If not defined, the user task stacks will be + used during interrupt handling. + + CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions + + CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. + + CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that + cause a 100 second delay during boot-up. This 100 second delay + serves no purpose other than it allows you to calibratre + CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure + the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until + the delay actually is 100 seconds. + + Individual subsystems can be enabled: + + CONFIG_AVR32_GPIOIRQ - GPIO interrupt support + CONFIG_AVR32_GPIOIRQSETA - Set of GPIOs on PORTA that support interrupts + CONFIG_AVR32_GPIOIRQSETB - Set of GPIOs on PORTB that support interrupts + + CONFIG_AVR32_USARTn - Enable support for USARTn + CONFIG_AVR32_USARTn_RS232 - Configure USARTn as an RS232 interface. + CONFIG_AVR32_USARTn_SPI - Configure USARTn as an SPI interface. + CONFIG_AVR32_USARTn_RS485 - Configure USARTn as an RS485 interface. + CONFIG_AVR32_USARTn_MAN - Configure USARTn as an Manchester interface. + CONFIG_AVR32_USARTn_MODEM - Configure USARTn as an Modem interface. + CONFIG_AVR32_USARTn_IRDA - Configure USARTn as an IRDA interface. + CONFIG_AVR32_USARTn_ISO786 - Configure USARTn as an ISO786 interface. + + AT32UC3B0256 specific device driver settings + + CONFIG_USARTn_SERIAL_CONSOLE - selects the USARTn for the + console and ttys0 (default is the USART0). + CONFIG_USARTn_RXBUFSIZE - Characters are buffered as received. + This specific the size of the receive buffer + CONFIG_USARTn_TXBUFSIZE - Characters are buffered before + being sent. This specific the size of the transmit buffer + CONFIG_USARTn_BAUD - The configure BAUD of the USART. Must be + CONFIG_USARTn_BITS - The number of bits. Must be either 7 or 8. + CONFIG_USARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity + CONFIG_USARTn_2STOP - Two stop bits + +Configurations +^^^^^^^^^^^^^^ + +Each Stellaris LM3S6965 Evaluation Kit configuration is maintained in a +sudirectory and can be selected as follow: + + cd tools + ./configure.sh avr32dev1/<subdir> + cd - + . ./setenv.sh + +Where <subdir> is one of the following: + + nsh: + Configures the NuttShell (nsh) located at examples/nsh. The + Configuration enables only the serial NSH interface. + + ostest: + This configuration directory, performs a simple OS test using + examples/ostest. + + NOTE: Round-robin scheduling is disabled in this test because + the RR test in examples/ostest declares data structures that + are too large for the poor little uc3 SRAM. + + diff --git a/nuttx/configs/avr32dev1/nsh/defconfig b/nuttx/configs/avr32dev1/nsh/defconfig index afbd08fae..99f3a538e 100755 --- a/nuttx/configs/avr32dev1/nsh/defconfig +++ b/nuttx/configs/avr32dev1/nsh/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_NOINTC - define if the architecture does not # support an interrupt controller or otherwise cannot support # APIs like up_enable_irq() and up_disable_irq(). @@ -83,7 +82,6 @@ CONFIG_ARCH_BOARD_AVR32DEV1=y CONFIG_BOARD_LOOPSPERMSEC=1140 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x00000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_NOINTC=y CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n diff --git a/nuttx/configs/avr32dev1/ostest/defconfig b/nuttx/configs/avr32dev1/ostest/defconfig index 59c5080db..c00113c06 100755 --- a/nuttx/configs/avr32dev1/ostest/defconfig +++ b/nuttx/configs/avr32dev1/ostest/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_NOINTC - define if the architecture does not # support an interrupt controller or otherwise cannot support # APIs like up_enable_irq() and up_disable_irq(). @@ -83,7 +82,6 @@ CONFIG_ARCH_BOARD_AVR32DEV1=y CONFIG_BOARD_LOOPSPERMSEC=1140 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x00000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_NOINTC=y CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n diff --git a/nuttx/configs/c5471evm/README.txt b/nuttx/configs/c5471evm/README.txt index 1e127d565..1329ee6d8 100644 --- a/nuttx/configs/c5471evm/README.txt +++ b/nuttx/configs/c5471evm/README.txt @@ -73,8 +73,6 @@ ARM/C5471-specific Configuration Options CONFIG_ROM_VECTORS - should be defined for the C5471 because the interrupt vectors are in ROM - CONFIG_DRAM_END - the size of installed DRAM. Unique to c5471 - CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that have LEDs diff --git a/nuttx/configs/c5471evm/httpd/defconfig b/nuttx/configs/c5471evm/httpd/defconfig index eb0950169..4b9c656c1 100644 --- a/nuttx/configs/c5471evm/httpd/defconfig +++ b/nuttx/configs/c5471evm/httpd/defconfig @@ -50,7 +50,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_ENDIAN_BIG - define if big endian (default is little endian) # CONFIG_ROM_VECTORS - unique to c5471 -# CONFIG_DRAM_END - the size of installed DRAM. # Unique to c5471 # CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to c5471. # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt @@ -68,11 +67,13 @@ CONFIG_ARCH_BOARD=c5471evm CONFIG_ARCH_BOARD_C5471EVM=y CONFIG_BOARD_LOOPSPERMSEC=1250 CONFIG_ROM_VECTORS=n -CONFIG_DRAM_END=0x11000000 CONFIG_ARCH_LEDS=y CONFIG_ARCH_INTERRUPTSTACK=0 CONFIG_ARCH_STACKDUMP=y +CONFIG_DRAM_START=0 +CONFIG_DRAM_SIZE=0x11000000 + # # C5471 specific device driver settings # diff --git a/nuttx/configs/c5471evm/nettest/defconfig b/nuttx/configs/c5471evm/nettest/defconfig index 96d221cf1..dac94afe4 100644 --- a/nuttx/configs/c5471evm/nettest/defconfig +++ b/nuttx/configs/c5471evm/nettest/defconfig @@ -50,7 +50,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_ENDIAN_BIG - define if big endian (default is little endian) # CONFIG_ROM_VECTORS - unique to c5471 -# CONFIG_DRAM_END - the size of installed DRAM. # Unique to c5471 # CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to c5471. # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt @@ -68,11 +67,13 @@ CONFIG_ARCH_BOARD=c5471evm CONFIG_ARCH_BOARD_C5471EVM=y CONFIG_BOARD_LOOPSPERMSEC=1250 CONFIG_ROM_VECTORS=n -CONFIG_DRAM_END=0x11000000 CONFIG_ARCH_LEDS=y CONFIG_ARCH_INTERRUPTSTACK=0 CONFIG_ARCH_STACKDUMP=y +CONFIG_DRAM_START=0 +CONFIG_DRAM_SIZE=0x11000000 + # # General build options # diff --git a/nuttx/configs/c5471evm/nsh/defconfig b/nuttx/configs/c5471evm/nsh/defconfig index dedbd8bde..67384f599 100644 --- a/nuttx/configs/c5471evm/nsh/defconfig +++ b/nuttx/configs/c5471evm/nsh/defconfig @@ -50,7 +50,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_ENDIAN_BIG - define if big endian (default is little endian) # CONFIG_ROM_VECTORS - unique to c5471 -# CONFIG_DRAM_END - the size of installed DRAM. # Unique to c5471 # CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to c5471. # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt @@ -68,11 +67,13 @@ CONFIG_ARCH_BOARD=c5471evm CONFIG_ARCH_BOARD_C5471EVM=y CONFIG_BOARD_LOOPSPERMSEC=1250 CONFIG_ROM_VECTORS=n -CONFIG_DRAM_END=0x11000000 CONFIG_ARCH_LEDS=y CONFIG_ARCH_INTERRUPTSTACK=0 CONFIG_ARCH_STACKDUMP=y +CONFIG_DRAM_START=0 +CONFIG_DRAM_SIZE=0x11000000 + # # C5471 specific device driver settings # diff --git a/nuttx/configs/c5471evm/ostest/defconfig b/nuttx/configs/c5471evm/ostest/defconfig index f24a607f1..3b57c8042 100644 --- a/nuttx/configs/c5471evm/ostest/defconfig +++ b/nuttx/configs/c5471evm/ostest/defconfig @@ -50,7 +50,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_ENDIAN_BIG - define if big endian (default is little endian) # CONFIG_ROM_VECTORS - unique to c5471 -# CONFIG_DRAM_END - the size of installed DRAM. # Unique to c5471 # CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to c5471. # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt @@ -68,11 +67,13 @@ CONFIG_ARCH_BOARD=c5471evm CONFIG_ARCH_BOARD_C5471EVM=y CONFIG_BOARD_LOOPSPERMSEC=1250 CONFIG_ROM_VECTORS=n -CONFIG_DRAM_END=0x11000000 CONFIG_ARCH_LEDS=y CONFIG_ARCH_INTERRUPTSTACK=0 CONFIG_ARCH_STACKDUMP=y +CONFIG_DRAM_START=0 +CONFIG_DRAM_SIZE=0x11000000 + # # C5471 specific device driver settings # diff --git a/nuttx/configs/compal_e88/nsh_highram/defconfig b/nuttx/configs/compal_e88/nsh_highram/defconfig index 1e63f5a1d..f8894c92a 100644 --- a/nuttx/configs/compal_e88/nsh_highram/defconfig +++ b/nuttx/configs/compal_e88/nsh_highram/defconfig @@ -50,7 +50,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_ENDIAN_BIG - define if big endian (default is little endian) # CONFIG_ROM_VECTORS - unique to c5471 -# CONFIG_DRAM_END - the size of installed DRAM. # Unique to c5471 # CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to c5471. # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt @@ -68,11 +67,13 @@ CONFIG_ARCH_BOARD=compal_e88 CONFIG_ARCH_BOARD_COMPALE88=y CONFIG_BOARD_LOOPSPERMSEC=1250 CONFIG_ROM_VECTORS=n -CONFIG_DRAM_END=0x00840000 CONFIG_ARCH_LEDS=n CONFIG_ARCH_INTERRUPTSTACK=1024 CONFIG_ARCH_STACKDUMP=y +CONFIG_DRAM_START=0 +CONFIG_DRAM_SIZE=0x00840000 + # # C5471 specific device driver settings # diff --git a/nuttx/configs/compal_e99/nsh_compalram/defconfig b/nuttx/configs/compal_e99/nsh_compalram/defconfig index f391e2a65..cfac84472 100644 --- a/nuttx/configs/compal_e99/nsh_compalram/defconfig +++ b/nuttx/configs/compal_e99/nsh_compalram/defconfig @@ -50,7 +50,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_ENDIAN_BIG - define if big endian (default is little endian) # CONFIG_ROM_VECTORS - unique to c5471 -# CONFIG_DRAM_END - the size of installed DRAM. # Unique to c5471 # CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to c5471. # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt @@ -68,7 +67,6 @@ CONFIG_ARCH_BOARD=compal_e99 CONFIG_ARCH_BOARD_COMPALE99=y CONFIG_BOARD_LOOPSPERMSEC=1250 CONFIG_ROM_VECTORS=n -CONFIG_DRAM_END=0x00840000 CONFIG_MM_REGIONS=2 CONFIG_HEAP2_START=0x01000000 CONFIG_HEAP2_END=0x01200000 @@ -76,6 +74,9 @@ CONFIG_ARCH_LEDS=n CONFIG_ARCH_INTERRUPTSTACK=1024 CONFIG_ARCH_STACKDUMP=y +CONFIG_DRAM_START=0 +CONFIG_DRAM_SIZE=0x00840000 + # # C5471 specific device driver settings # diff --git a/nuttx/configs/compal_e99/nsh_highram/defconfig b/nuttx/configs/compal_e99/nsh_highram/defconfig index f538cbb74..ad1e47b02 100644 --- a/nuttx/configs/compal_e99/nsh_highram/defconfig +++ b/nuttx/configs/compal_e99/nsh_highram/defconfig @@ -50,7 +50,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_ENDIAN_BIG - define if big endian (default is little endian) # CONFIG_ROM_VECTORS - unique to c5471 -# CONFIG_DRAM_END - the size of installed DRAM. # Unique to c5471 # CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to c5471. # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt @@ -68,7 +67,6 @@ CONFIG_ARCH_BOARD=compal_e99 CONFIG_ARCH_BOARD_COMPALE99=y CONFIG_BOARD_LOOPSPERMSEC=1250 CONFIG_ROM_VECTORS=n -CONFIG_DRAM_END=0x00840000 CONFIG_MM_REGIONS=2 CONFIG_HEAP2_START=0x01000000 CONFIG_HEAP2_END=0x01200000 @@ -76,6 +74,9 @@ CONFIG_ARCH_LEDS=n CONFIG_ARCH_INTERRUPTSTACK=1024 CONFIG_ARCH_STACKDUMP=y +CONFIG_DRAM_START=0 +CONFIG_DRAM_SIZE=0x00840000 + # # C5471 specific device driver settings # diff --git a/nuttx/configs/demo9s12ne64/README.txt b/nuttx/configs/demo9s12ne64/README.txt index 58fb44434..0b8f77690 100755 --- a/nuttx/configs/demo9s12ne64/README.txt +++ b/nuttx/configs/demo9s12ne64/README.txt @@ -296,8 +296,6 @@ HCS12/DEMO9S12NEC64-specific Configuration Options CONFIG_DRAM_START - The start address of installed RAM - CONFIG_DRAM_END - Should be (CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that have LEDs diff --git a/nuttx/configs/demo9s12ne64/ostest/defconfig b/nuttx/configs/demo9s12ne64/ostest/defconfig index b12b56e66..3ec27669c 100755 --- a/nuttx/configs/demo9s12ne64/ostest/defconfig +++ b/nuttx/configs/demo9s12ne64/ostest/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed RAM. # CONFIG_DRAM_START - The start address of RAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_NOINTC - define if the architecture does not # support an interrupt controller or otherwise cannot support # APIs like up_enable_irq() and up_disable_irq(). @@ -82,7 +81,6 @@ CONFIG_ARCH_BOARD_DEMOS92S12NEC64=y CONFIG_BOARD_LOOPSPERMSEC=5483 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_NOINTC=y CONFIG_ARCH_IRQPRIO=n CONFIG_ARCH_INTERRUPTSTACK=n diff --git a/nuttx/configs/eagle100/README.txt b/nuttx/configs/eagle100/README.txt index 7979ca16c..28d51b518 100644 --- a/nuttx/configs/eagle100/README.txt +++ b/nuttx/configs/eagle100/README.txt @@ -252,10 +252,6 @@ Eagle100-specific Configuration Options CONFIG_DRAM_START=0x20000000 - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_ARCH_IRQPRIO - The LM3S6918 supports interrupt prioritization CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/eagle100/httpd/defconfig b/nuttx/configs/eagle100/httpd/defconfig index 5c0b8b28a..ec2db7d36 100644 --- a/nuttx/configs/eagle100/httpd/defconfig +++ b/nuttx/configs/eagle100/httpd/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LM3S6918 supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -78,7 +77,6 @@ CONFIG_ARCH_BOARD_EAGLE100=y CONFIG_BOARD_LOOPSPERMSEC=4531 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/eagle100/nettest/defconfig b/nuttx/configs/eagle100/nettest/defconfig index bd225e7af..ebc5be23a 100644 --- a/nuttx/configs/eagle100/nettest/defconfig +++ b/nuttx/configs/eagle100/nettest/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LM3S6918 supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -78,7 +77,6 @@ CONFIG_ARCH_BOARD_EAGLE100=y CONFIG_BOARD_LOOPSPERMSEC=4531 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/eagle100/nsh/defconfig b/nuttx/configs/eagle100/nsh/defconfig index 7f97b1965..b99367e64 100644 --- a/nuttx/configs/eagle100/nsh/defconfig +++ b/nuttx/configs/eagle100/nsh/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LM3S6918 supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -78,7 +77,6 @@ CONFIG_ARCH_BOARD_EAGLE100=y CONFIG_BOARD_LOOPSPERMSEC=4531 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/eagle100/nxflat/defconfig b/nuttx/configs/eagle100/nxflat/defconfig index 49221f4fa..db0557a52 100644 --- a/nuttx/configs/eagle100/nxflat/defconfig +++ b/nuttx/configs/eagle100/nxflat/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LM3S6918 supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -78,7 +77,6 @@ CONFIG_ARCH_BOARD_EAGLE100=y CONFIG_BOARD_LOOPSPERMSEC=4531 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/eagle100/ostest/defconfig b/nuttx/configs/eagle100/ostest/defconfig index 1aae6ce3a..f4048f08b 100644 --- a/nuttx/configs/eagle100/ostest/defconfig +++ b/nuttx/configs/eagle100/ostest/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LM3S6918 supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -78,7 +77,6 @@ CONFIG_ARCH_BOARD_EAGLE100=y CONFIG_BOARD_LOOPSPERMSEC=4531 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/eagle100/thttpd/defconfig b/nuttx/configs/eagle100/thttpd/defconfig index 8241fa7be..6ed845d69 100644 --- a/nuttx/configs/eagle100/thttpd/defconfig +++ b/nuttx/configs/eagle100/thttpd/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LM3S6918 supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -78,7 +77,6 @@ CONFIG_ARCH_BOARD_EAGLE100=y CONFIG_BOARD_LOOPSPERMSEC=4531 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/ekk-lm3s9b96/README.txt b/nuttx/configs/ekk-lm3s9b96/README.txt index 9c4e1ba69..a6dcab87d 100644 --- a/nuttx/configs/ekk-lm3s9b96/README.txt +++ b/nuttx/configs/ekk-lm3s9b96/README.txt @@ -274,10 +274,6 @@ Stellaris EKK-LM3S9B96 Evaluation Kit Configuration Options CONFIG_DRAM_START=0x20000000 - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_ARCH_IRQPRIO - The LM3S6918 supports interrupt prioritization CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/ekk-lm3s9b96/nsh/defconfig b/nuttx/configs/ekk-lm3s9b96/nsh/defconfig index e7eacb2f9..382de7f2f 100644 --- a/nuttx/configs/ekk-lm3s9b96/nsh/defconfig +++ b/nuttx/configs/ekk-lm3s9b96/nsh/defconfig @@ -52,7 +52,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LM3S6B96 supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -77,7 +76,6 @@ CONFIG_ARCH_BOARD_EKKLM3S9B96=y CONFIG_BOARD_LOOPSPERMSEC=4531 CONFIG_DRAM_SIZE=0x00018000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/ekk-lm3s9b96/ostest/defconfig b/nuttx/configs/ekk-lm3s9b96/ostest/defconfig index bb7d02647..6cfedb59f 100644 --- a/nuttx/configs/ekk-lm3s9b96/ostest/defconfig +++ b/nuttx/configs/ekk-lm3s9b96/ostest/defconfig @@ -52,7 +52,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LM3S6965 supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -77,7 +76,6 @@ CONFIG_ARCH_BOARD_EKKLM3S9B96=y CONFIG_BOARD_LOOPSPERMSEC=4531 CONFIG_DRAM_SIZE=0x00018000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/hymini-stm32v/README.txt b/nuttx/configs/hymini-stm32v/README.txt index 43a412796..ddb62e84e 100755 --- a/nuttx/configs/hymini-stm32v/README.txt +++ b/nuttx/configs/hymini-stm32v/README.txt @@ -319,10 +319,6 @@ HY-Mini specific Configuration Options CONFIG_DRAM_START=0x20000000 - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_ARCH_IRQPRIO - The STM32F103V supports interrupt prioritization CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/hymini-stm32v/buttons/defconfig b/nuttx/configs/hymini-stm32v/buttons/defconfig index 80099c133..af9de4a12 100644 --- a/nuttx/configs/hymini-stm32v/buttons/defconfig +++ b/nuttx/configs/hymini-stm32v/buttons/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -80,7 +79,6 @@ CONFIG_ARCH_BOARD_HYMINI_STM32V=y CONFIG_BOARD_LOOPSPERMSEC=5483 CONFIG_DRAM_SIZE=0x0000C000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/hymini-stm32v/nsh/defconfig b/nuttx/configs/hymini-stm32v/nsh/defconfig index e11f809d5..b8ad080fe 100755 --- a/nuttx/configs/hymini-stm32v/nsh/defconfig +++ b/nuttx/configs/hymini-stm32v/nsh/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_HYMINI_STM32V=y CONFIG_BOARD_LOOPSPERMSEC=5483 CONFIG_DRAM_SIZE=0x0000C000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/hymini-stm32v/nsh2/defconfig b/nuttx/configs/hymini-stm32v/nsh2/defconfig index fea9830fb..0b0cbfda4 100644 --- a/nuttx/configs/hymini-stm32v/nsh2/defconfig +++ b/nuttx/configs/hymini-stm32v/nsh2/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_HYMINI_STM32V=y CONFIG_BOARD_LOOPSPERMSEC=5483 CONFIG_DRAM_SIZE=0x0000C000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/hymini-stm32v/nx/defconfig b/nuttx/configs/hymini-stm32v/nx/defconfig index a53fbba41..f32afd1b9 100644 --- a/nuttx/configs/hymini-stm32v/nx/defconfig +++ b/nuttx/configs/hymini-stm32v/nx/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_HYMINI_STM32V=y CONFIG_BOARD_LOOPSPERMSEC=5483 CONFIG_DRAM_SIZE=0x0000C000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/hymini-stm32v/nxlines/defconfig b/nuttx/configs/hymini-stm32v/nxlines/defconfig index 4d7533817..1439b4d55 100644 --- a/nuttx/configs/hymini-stm32v/nxlines/defconfig +++ b/nuttx/configs/hymini-stm32v/nxlines/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -80,7 +79,6 @@ CONFIG_ARCH_BOARD_HYMINI_STM32V=y CONFIG_BOARD_LOOPSPERMSEC=5483 CONFIG_DRAM_SIZE=0x0000C000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/hymini-stm32v/usbserial/defconfig b/nuttx/configs/hymini-stm32v/usbserial/defconfig index 37dcb860c..c1abc15dc 100755 --- a/nuttx/configs/hymini-stm32v/usbserial/defconfig +++ b/nuttx/configs/hymini-stm32v/usbserial/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -80,7 +79,6 @@ CONFIG_ARCH_BOARD_HYMINI_STM32V=y CONFIG_BOARD_LOOPSPERMSEC=5483 CONFIG_DRAM_SIZE=0x0000C000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/hymini-stm32v/usbstorage/defconfig b/nuttx/configs/hymini-stm32v/usbstorage/defconfig index 4c52c4839..b783a1f6a 100755 --- a/nuttx/configs/hymini-stm32v/usbstorage/defconfig +++ b/nuttx/configs/hymini-stm32v/usbstorage/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -80,7 +79,6 @@ CONFIG_ARCH_BOARD_HYMINI_STM32V=y CONFIG_BOARD_LOOPSPERMSEC=5483 CONFIG_DRAM_SIZE=0x0000C000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/kwikstik-k40/README.txt b/nuttx/configs/kwikstik-k40/README.txt index 285b2e099..ea6d9dee6 100644 --- a/nuttx/configs/kwikstik-k40/README.txt +++ b/nuttx/configs/kwikstik-k40/README.txt @@ -337,10 +337,6 @@ KwikStik-K40-specific Configuration Options CONFIG_DRAM_START=0x20000000 - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_ARCH_IRQPRIO - The Kinetis K40 supports interrupt prioritization CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/kwikstik-k40/ostest/defconfig b/nuttx/configs/kwikstik-k40/ostest/defconfig index d5a077c42..709a5585a 100755 --- a/nuttx/configs/kwikstik-k40/ostest/defconfig +++ b/nuttx/configs/kwikstik-k40/ostest/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The K40X256VLQ100 supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_KWIKSTIK_K40=y CONFIG_BOARD_LOOPSPERMSEC=9535 CONFIG_DRAM_START=0x1fff8000 CONFIG_DRAM_SIZE= 0x00010000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/lincoln60/README.txt b/nuttx/configs/lincoln60/README.txt index 6ad37d363..d94666d90 100644 --- a/nuttx/configs/lincoln60/README.txt +++ b/nuttx/configs/lincoln60/README.txt @@ -239,10 +239,6 @@ Lincoln 60 Configuration Options CONFIG_DRAM_START=0x10000000 - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/lincoln60/nsh/defconfig b/nuttx/configs/lincoln60/nsh/defconfig index 1aec84278..4f3219e6d 100644 --- a/nuttx/configs/lincoln60/nsh/defconfig +++ b/nuttx/configs/lincoln60/nsh/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_LINCOLN60=y CONFIG_BOARD_LOOPSPERMSEC=7982 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/lincoln60/ostest/defconfig b/nuttx/configs/lincoln60/ostest/defconfig index 6be405482..b3087f3a7 100644 --- a/nuttx/configs/lincoln60/ostest/defconfig +++ b/nuttx/configs/lincoln60/ostest/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_LINCOLN60=y CONFIG_BOARD_LOOPSPERMSEC=8111 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/lm3s6432-s2e/README.txt b/nuttx/configs/lm3s6432-s2e/README.txt index 8cba45260..a5b0b566b 100644 --- a/nuttx/configs/lm3s6432-s2e/README.txt +++ b/nuttx/configs/lm3s6432-s2e/README.txt @@ -268,10 +268,6 @@ Stellaris MDL-S2E Reference Design Configuration Options CONFIG_DRAM_START=0x20000000 - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_ARCH_IRQPRIO - The LM3S6918 supports interrupt prioritization CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/lm3s6432-s2e/nsh/defconfig b/nuttx/configs/lm3s6432-s2e/nsh/defconfig index a8a39f2d1..b10e2a176 100644 --- a/nuttx/configs/lm3s6432-s2e/nsh/defconfig +++ b/nuttx/configs/lm3s6432-s2e/nsh/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LM3S6432 supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -76,7 +75,6 @@ CONFIG_ARCH_BOARD_LM3S6432S2E=y CONFIG_BOARD_LOOPSPERMSEC=4531 CONFIG_DRAM_SIZE=0x00008000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/lm3s6432-s2e/ostest/defconfig b/nuttx/configs/lm3s6432-s2e/ostest/defconfig index 09d0ab1d2..1e73dff55 100644 --- a/nuttx/configs/lm3s6432-s2e/ostest/defconfig +++ b/nuttx/configs/lm3s6432-s2e/ostest/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LM3S6432 supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -76,7 +75,6 @@ CONFIG_ARCH_BOARD_LM3S6432S2E=y CONFIG_BOARD_LOOPSPERMSEC=4531 CONFIG_DRAM_SIZE=0x00008000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/lm3s6965-ek/README.txt b/nuttx/configs/lm3s6965-ek/README.txt index 5f122d03a..5b26b41c8 100755 --- a/nuttx/configs/lm3s6965-ek/README.txt +++ b/nuttx/configs/lm3s6965-ek/README.txt @@ -336,10 +336,6 @@ Stellaris LM3S6965 Evaluation Kit Configuration Options CONFIG_DRAM_START=0x20000000 - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_ARCH_IRQPRIO - The LM3S6918 supports interrupt prioritization CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/lm3s6965-ek/nsh/defconfig b/nuttx/configs/lm3s6965-ek/nsh/defconfig index 2621c8147..e84f1b137 100755 --- a/nuttx/configs/lm3s6965-ek/nsh/defconfig +++ b/nuttx/configs/lm3s6965-ek/nsh/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LM3S6965 supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -76,7 +75,6 @@ CONFIG_ARCH_BOARD_LM3S6965EK=y CONFIG_BOARD_LOOPSPERMSEC=4531 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/lm3s6965-ek/nx/defconfig b/nuttx/configs/lm3s6965-ek/nx/defconfig index c3dd32ee4..415253446 100755 --- a/nuttx/configs/lm3s6965-ek/nx/defconfig +++ b/nuttx/configs/lm3s6965-ek/nx/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LM3S6965 supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -76,7 +75,6 @@ CONFIG_ARCH_BOARD_LM3S6965EK=y CONFIG_BOARD_LOOPSPERMSEC=4531 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/lm3s6965-ek/ostest/defconfig b/nuttx/configs/lm3s6965-ek/ostest/defconfig index eac76216e..620628463 100755 --- a/nuttx/configs/lm3s6965-ek/ostest/defconfig +++ b/nuttx/configs/lm3s6965-ek/ostest/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LM3S6965 supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -76,7 +75,6 @@ CONFIG_ARCH_BOARD_LM3S6965EK=y CONFIG_BOARD_LOOPSPERMSEC=4531 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/lm3s8962-ek/README.txt b/nuttx/configs/lm3s8962-ek/README.txt index 796f60234..c1e0b9fea 100755 --- a/nuttx/configs/lm3s8962-ek/README.txt +++ b/nuttx/configs/lm3s8962-ek/README.txt @@ -320,10 +320,6 @@ Stellaris LM3S8962 Evaluation Kit Configuration Options CONFIG_DRAM_START=0x20000000 - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_ARCH_IRQPRIO - The LM3S6918 supports interrupt prioritization CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/lm3s8962-ek/nsh/defconfig b/nuttx/configs/lm3s8962-ek/nsh/defconfig index c1cb66690..cab96f28e 100755 --- a/nuttx/configs/lm3s8962-ek/nsh/defconfig +++ b/nuttx/configs/lm3s8962-ek/nsh/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LM3S8962 supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -76,7 +75,6 @@ CONFIG_ARCH_BOARD_LM3S8962EK=y CONFIG_BOARD_LOOPSPERMSEC=4531 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/lm3s8962-ek/nx/defconfig b/nuttx/configs/lm3s8962-ek/nx/defconfig index 1fc5306dc..8336207a8 100755 --- a/nuttx/configs/lm3s8962-ek/nx/defconfig +++ b/nuttx/configs/lm3s8962-ek/nx/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LM3S8962 supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -76,7 +75,6 @@ CONFIG_ARCH_BOARD_LM3S8962EK=y CONFIG_BOARD_LOOPSPERMSEC=4531 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/lm3s8962-ek/ostest/defconfig b/nuttx/configs/lm3s8962-ek/ostest/defconfig index 4fe57412c..9baeaf780 100755 --- a/nuttx/configs/lm3s8962-ek/ostest/defconfig +++ b/nuttx/configs/lm3s8962-ek/ostest/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LM3S8962 supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -76,7 +75,6 @@ CONFIG_ARCH_BOARD_LM3S8962EK=y CONFIG_BOARD_LOOPSPERMSEC=4531 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/lpc4330-xplorer/README.txt b/nuttx/configs/lpc4330-xplorer/README.txt index 4cd867c32..c9dd08ac5 100644 --- a/nuttx/configs/lpc4330-xplorer/README.txt +++ b/nuttx/configs/lpc4330-xplorer/README.txt @@ -666,10 +666,6 @@ LPC4330-Xplorer Configuration Options CONFIG_DRAM_START=0x10000000 - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_ARCH_IRQPRIO - The LPC43xx supports interrupt prioritization CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/lpc4330-xplorer/nsh/defconfig b/nuttx/configs/lpc4330-xplorer/nsh/defconfig index d168a947a..3fdb53ad4 100644 --- a/nuttx/configs/lpc4330-xplorer/nsh/defconfig +++ b/nuttx/configs/lpc4330-xplorer/nsh/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The Cortex-M4 supports interrupt prioritization # CONFIG_ARCH_FPU - The Cortex-M4 supports a floating point unit (FPU) # (But, unfortunately, most versions of GCC do not support it). @@ -84,7 +83,6 @@ CONFIG_ARCH_BOARD_LPC4330_XPLORER=y CONFIG_BOARD_LOOPSPERMSEC=18535 CONFIG_DRAM_SIZE=(72*1024) CONFIG_DRAM_START=0x10080000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_FPU=n CONFIG_ARCH_INTERRUPTSTACK=n diff --git a/nuttx/configs/lpc4330-xplorer/ostest/defconfig b/nuttx/configs/lpc4330-xplorer/ostest/defconfig index ddf27ee72..40ceb025f 100644 --- a/nuttx/configs/lpc4330-xplorer/ostest/defconfig +++ b/nuttx/configs/lpc4330-xplorer/ostest/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The Cortex-M4 supports interrupt prioritization # CONFIG_ARCH_FPU - The Cortex-M4 supports a floating point unit (FPU) # (But, unfortunately, most versions of GCC do not support it). @@ -84,7 +83,6 @@ CONFIG_ARCH_BOARD_LPC4330_XPLORER=y CONFIG_BOARD_LOOPSPERMSEC=18535 CONFIG_DRAM_SIZE=(72*1024) CONFIG_DRAM_START=0x10080000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_FPU=n CONFIG_ARCH_INTERRUPTSTACK=n diff --git a/nuttx/configs/lpcxpresso-lpc1768/README.txt b/nuttx/configs/lpcxpresso-lpc1768/README.txt index 5632d0e82..402d52881 100755 --- a/nuttx/configs/lpcxpresso-lpc1768/README.txt +++ b/nuttx/configs/lpcxpresso-lpc1768/README.txt @@ -568,10 +568,6 @@ LPCXpresso Configuration Options CONFIG_DRAM_START=0x10000000 - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/lpcxpresso-lpc1768/dhcpd/defconfig b/nuttx/configs/lpcxpresso-lpc1768/dhcpd/defconfig index ce4f45162..564d7c796 100755 --- a/nuttx/configs/lpcxpresso-lpc1768/dhcpd/defconfig +++ b/nuttx/configs/lpcxpresso-lpc1768/dhcpd/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_LPCXPRESSO=y CONFIG_BOARD_LOOPSPERMSEC=8079 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/lpcxpresso-lpc1768/nsh/defconfig b/nuttx/configs/lpcxpresso-lpc1768/nsh/defconfig index 18d1f5c73..e1376f7bc 100755 --- a/nuttx/configs/lpcxpresso-lpc1768/nsh/defconfig +++ b/nuttx/configs/lpcxpresso-lpc1768/nsh/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_LPCXPRESSO=y CONFIG_BOARD_LOOPSPERMSEC=8079 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/lpcxpresso-lpc1768/nx/defconfig b/nuttx/configs/lpcxpresso-lpc1768/nx/defconfig index a9415d3db..07851a628 100755 --- a/nuttx/configs/lpcxpresso-lpc1768/nx/defconfig +++ b/nuttx/configs/lpcxpresso-lpc1768/nx/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_LPCXPRESSO=y CONFIG_BOARD_LOOPSPERMSEC=8079 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/lpcxpresso-lpc1768/ostest/defconfig b/nuttx/configs/lpcxpresso-lpc1768/ostest/defconfig index 9dacfef1c..027cdc0db 100755 --- a/nuttx/configs/lpcxpresso-lpc1768/ostest/defconfig +++ b/nuttx/configs/lpcxpresso-lpc1768/ostest/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_LPCXPRESSO=y CONFIG_BOARD_LOOPSPERMSEC=8079 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/lpcxpresso-lpc1768/thttpd/defconfig b/nuttx/configs/lpcxpresso-lpc1768/thttpd/defconfig index 081310a2b..76b0d9781 100755 --- a/nuttx/configs/lpcxpresso-lpc1768/thttpd/defconfig +++ b/nuttx/configs/lpcxpresso-lpc1768/thttpd/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_LPCXPRESSO=y CONFIG_BOARD_LOOPSPERMSEC=8079 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/lpcxpresso-lpc1768/usbstorage/defconfig b/nuttx/configs/lpcxpresso-lpc1768/usbstorage/defconfig index 344dde798..ffc2a276f 100755 --- a/nuttx/configs/lpcxpresso-lpc1768/usbstorage/defconfig +++ b/nuttx/configs/lpcxpresso-lpc1768/usbstorage/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_LPCXPRESSO=y CONFIG_BOARD_LOOPSPERMSEC=8079 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/mbed/README.txt b/nuttx/configs/mbed/README.txt index 0b98d9085..b64923065 100755 --- a/nuttx/configs/mbed/README.txt +++ b/nuttx/configs/mbed/README.txt @@ -209,10 +209,6 @@ mbed Configuration Options CONFIG_DRAM_START=0x10000000 - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/mbed/hidkbd/defconfig b/nuttx/configs/mbed/hidkbd/defconfig index db15a9d21..4b15b76ad 100644 --- a/nuttx/configs/mbed/hidkbd/defconfig +++ b/nuttx/configs/mbed/hidkbd/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_MBED=y CONFIG_BOARD_LOOPSPERMSEC=7982 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/mbed/nsh/defconfig b/nuttx/configs/mbed/nsh/defconfig index 058606a09..d0b8cf43c 100755 --- a/nuttx/configs/mbed/nsh/defconfig +++ b/nuttx/configs/mbed/nsh/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_MBED=y CONFIG_BOARD_LOOPSPERMSEC=7982 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/mcu123-lpc214x/README.txt b/nuttx/configs/mcu123-lpc214x/README.txt index 35afa9ac8..7c760caa2 100644 --- a/nuttx/configs/mcu123-lpc214x/README.txt +++ b/nuttx/configs/mcu123-lpc214x/README.txt @@ -259,8 +259,6 @@ ARM/LPC214X-specific Configuration Options CONFIG_DRAM_START - The start address of installed RAM - CONFIG_DRAM_END - Should be (CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that have LEDs diff --git a/nuttx/configs/mcu123-lpc214x/composite/defconfig b/nuttx/configs/mcu123-lpc214x/composite/defconfig index 701d1e91f..43da96fdf 100644 --- a/nuttx/configs/mcu123-lpc214x/composite/defconfig +++ b/nuttx/configs/mcu123-lpc214x/composite/defconfig @@ -69,7 +69,6 @@ CONFIG_BOARD_LOOPSPERMSEC=3270 CONFIG_ARCH_LEDS=y CONFIG_DRAM_SIZE=0x00008000 CONFIG_DRAM_START=0x40000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_INTERRUPTSTACK=1024 CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/mcu123-lpc214x/nsh/defconfig b/nuttx/configs/mcu123-lpc214x/nsh/defconfig index 934825cb3..3a7bfddb9 100644 --- a/nuttx/configs/mcu123-lpc214x/nsh/defconfig +++ b/nuttx/configs/mcu123-lpc214x/nsh/defconfig @@ -69,7 +69,6 @@ CONFIG_BOARD_LOOPSPERMSEC=3270 CONFIG_ARCH_LEDS=y CONFIG_DRAM_SIZE=0x00008000 CONFIG_DRAM_START=0x40000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_INTERRUPTSTACK=0 CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/mcu123-lpc214x/ostest/defconfig b/nuttx/configs/mcu123-lpc214x/ostest/defconfig index 8540617ee..5a6107ce3 100644 --- a/nuttx/configs/mcu123-lpc214x/ostest/defconfig +++ b/nuttx/configs/mcu123-lpc214x/ostest/defconfig @@ -69,7 +69,6 @@ CONFIG_BOARD_LOOPSPERMSEC=3270 CONFIG_ARCH_LEDS=y CONFIG_DRAM_SIZE=0x00008000 CONFIG_DRAM_START=0x40000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_INTERRUPTSTACK=0 CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/mcu123-lpc214x/usbserial/defconfig b/nuttx/configs/mcu123-lpc214x/usbserial/defconfig index 84ee234b7..19063f108 100644 --- a/nuttx/configs/mcu123-lpc214x/usbserial/defconfig +++ b/nuttx/configs/mcu123-lpc214x/usbserial/defconfig @@ -69,7 +69,6 @@ CONFIG_BOARD_LOOPSPERMSEC=3270 CONFIG_ARCH_LEDS=y CONFIG_DRAM_SIZE=0x00008000 CONFIG_DRAM_START=0x40000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_INTERRUPTSTACK=1024 CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/mcu123-lpc214x/usbstorage/defconfig b/nuttx/configs/mcu123-lpc214x/usbstorage/defconfig index ea968df7b..f43eeda3f 100644 --- a/nuttx/configs/mcu123-lpc214x/usbstorage/defconfig +++ b/nuttx/configs/mcu123-lpc214x/usbstorage/defconfig @@ -69,7 +69,6 @@ CONFIG_BOARD_LOOPSPERMSEC=3270 CONFIG_ARCH_LEDS=y CONFIG_DRAM_SIZE=0x00008000 CONFIG_DRAM_START=0x40000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_INTERRUPTSTACK=1024 CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/micropendous3/README.txt b/nuttx/configs/micropendous3/README.txt index 1a72edc28..e7b2041aa 100644 --- a/nuttx/configs/micropendous3/README.txt +++ b/nuttx/configs/micropendous3/README.txt @@ -432,10 +432,6 @@ Micropendous3 Configuration Options CONFIG_DRAM_START=0x800100 - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that have LEDs diff --git a/nuttx/configs/micropendous3/hello/defconfig b/nuttx/configs/micropendous3/hello/defconfig index 46d70f510..2f7c9fa7d 100644 --- a/nuttx/configs/micropendous3/hello/defconfig +++ b/nuttx/configs/micropendous3/hello/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_NOINTC - define if the architecture does not # support an interrupt controller or otherwise cannot support # APIs like up_enable_irq() and up_disable_irq(). @@ -82,7 +81,6 @@ CONFIG_ARCH_BOARD_MICROPENDOUS3=y CONFIG_BOARD_LOOPSPERMSEC=(8*108) CONFIG_DRAM_SIZE=(4*1024) CONFIG_DRAM_START=0x800100 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_NOINTC=y CONFIG_ARCH_IRQPRIO=n CONFIG_ARCH_INTERRUPTSTACK=n diff --git a/nuttx/configs/mirtoo/README.txt b/nuttx/configs/mirtoo/README.txt index 24f6314ef..b2d0c5790 100644 --- a/nuttx/configs/mirtoo/README.txt +++ b/nuttx/configs/mirtoo/README.txt @@ -698,10 +698,6 @@ PIC32MX Configuration Options CONFIG_DRAM_START=0xa0000000 - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_ARCH_IRQPRIO - The PIC32MXx supports interrupt prioritization CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/mirtoo/nsh/defconfig b/nuttx/configs/mirtoo/nsh/defconfig index 779398a20..646375671 100644 --- a/nuttx/configs/mirtoo/nsh/defconfig +++ b/nuttx/configs/mirtoo/nsh/defconfig @@ -52,7 +52,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_NOINTC - define if the architecture does not # support an interrupt controller or otherwise cannot support # APIs like up_enable_irq() and up_disable_irq(). @@ -92,7 +91,6 @@ CONFIG_ARCH_BOARD_MIRTOO=y CONFIG_BOARD_LOOPSPERMSEC=8079 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0xa0000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_NOINTC=n CONFIG_ARCH_VECNOTIRQ=y CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/mirtoo/nxffs/defconfig b/nuttx/configs/mirtoo/nxffs/defconfig index af8d0d0b0..f20803475 100644 --- a/nuttx/configs/mirtoo/nxffs/defconfig +++ b/nuttx/configs/mirtoo/nxffs/defconfig @@ -52,7 +52,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_NOINTC - define if the architecture does not # support an interrupt controller or otherwise cannot support # APIs like up_enable_irq() and up_disable_irq(). @@ -92,7 +91,6 @@ CONFIG_ARCH_BOARD_MIRTOO=y CONFIG_BOARD_LOOPSPERMSEC=8079 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0xa0000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_NOINTC=n CONFIG_ARCH_VECNOTIRQ=y CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/mirtoo/ostest/defconfig b/nuttx/configs/mirtoo/ostest/defconfig index e76d81258..bba530c83 100644 --- a/nuttx/configs/mirtoo/ostest/defconfig +++ b/nuttx/configs/mirtoo/ostest/defconfig @@ -52,7 +52,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_NOINTC - define if the architecture does not # support an interrupt controller or otherwise cannot support # APIs like up_enable_irq() and up_disable_irq(). @@ -92,7 +91,6 @@ CONFIG_ARCH_BOARD_MIRTOO=y CONFIG_BOARD_LOOPSPERMSEC=8079 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0xa0000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_NOINTC=n CONFIG_ARCH_VECNOTIRQ=y CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/ne64badge/README.txt b/nuttx/configs/ne64badge/README.txt index d1a5a904c..48a19264e 100755 --- a/nuttx/configs/ne64badge/README.txt +++ b/nuttx/configs/ne64badge/README.txt @@ -403,8 +403,6 @@ HCS12/NE64BADGE-specific Configuration Options CONFIG_DRAM_START - The start address of installed RAM - CONFIG_DRAM_END - Should be (CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that have LEDs diff --git a/nuttx/configs/ne64badge/ostest/defconfig b/nuttx/configs/ne64badge/ostest/defconfig index de6e00d85..f420b3976 100755 --- a/nuttx/configs/ne64badge/ostest/defconfig +++ b/nuttx/configs/ne64badge/ostest/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed RAM. # CONFIG_DRAM_START - The start address of RAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_NOINTC - define if the architecture does not # support an interrupt controller or otherwise cannot support # APIs like up_enable_irq() and up_disable_irq(). @@ -82,7 +81,6 @@ CONFIG_ARCH_BOARD_NE64BADGE=y CONFIG_BOARD_LOOPSPERMSEC=5483 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_NOINTC=y CONFIG_ARCH_IRQPRIO=n CONFIG_ARCH_INTERRUPTSTACK=n diff --git a/nuttx/configs/nucleus2g/README.txt b/nuttx/configs/nucleus2g/README.txt index df4776301..81bd2fe65 100755 --- a/nuttx/configs/nucleus2g/README.txt +++ b/nuttx/configs/nucleus2g/README.txt @@ -321,10 +321,6 @@ Nucleus 2G Configuration Options CONFIG_DRAM_START=0x10000000 - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/nucleus2g/nsh/defconfig b/nuttx/configs/nucleus2g/nsh/defconfig index 8001f0e87..607eac73c 100755 --- a/nuttx/configs/nucleus2g/nsh/defconfig +++ b/nuttx/configs/nucleus2g/nsh/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_NUCLEUS2G=y CONFIG_BOARD_LOOPSPERMSEC=7982 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/nucleus2g/ostest/defconfig b/nuttx/configs/nucleus2g/ostest/defconfig index b488dd8de..3363ffbc1 100755 --- a/nuttx/configs/nucleus2g/ostest/defconfig +++ b/nuttx/configs/nucleus2g/ostest/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_NUCLEUS2G=y CONFIG_BOARD_LOOPSPERMSEC=7982 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/nucleus2g/usbserial/defconfig b/nuttx/configs/nucleus2g/usbserial/defconfig index aa48558a4..01a8bd970 100755 --- a/nuttx/configs/nucleus2g/usbserial/defconfig +++ b/nuttx/configs/nucleus2g/usbserial/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_NUCLEUS2G=y CONFIG_BOARD_LOOPSPERMSEC=7982 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/nucleus2g/usbstorage/defconfig b/nuttx/configs/nucleus2g/usbstorage/defconfig index de87daa05..bc29d45cc 100755 --- a/nuttx/configs/nucleus2g/usbstorage/defconfig +++ b/nuttx/configs/nucleus2g/usbstorage/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_NUCLEUS2G=y CONFIG_BOARD_LOOPSPERMSEC=7982 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/olimex-lpc1766stk/README.txt b/nuttx/configs/olimex-lpc1766stk/README.txt index b81826e30..19cf66167 100755 --- a/nuttx/configs/olimex-lpc1766stk/README.txt +++ b/nuttx/configs/olimex-lpc1766stk/README.txt @@ -617,10 +617,6 @@ Olimex LPC1766-STK Configuration Options CONFIG_DRAM_START=0x10000000 - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/olimex-lpc1766stk/ftpc/defconfig b/nuttx/configs/olimex-lpc1766stk/ftpc/defconfig index 221fe8371..40c98ed97 100755 --- a/nuttx/configs/olimex-lpc1766stk/ftpc/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/ftpc/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_LPC1766STK=y CONFIG_BOARD_LOOPSPERMSEC=8111 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/olimex-lpc1766stk/hidkbd/defconfig b/nuttx/configs/olimex-lpc1766stk/hidkbd/defconfig index 6365a1720..bc773c2d6 100755 --- a/nuttx/configs/olimex-lpc1766stk/hidkbd/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/hidkbd/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_LPC1766STK=y CONFIG_BOARD_LOOPSPERMSEC=8111 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/olimex-lpc1766stk/nettest/defconfig b/nuttx/configs/olimex-lpc1766stk/nettest/defconfig index 8c0b87b3f..f7c971d9f 100755 --- a/nuttx/configs/olimex-lpc1766stk/nettest/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/nettest/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_LPC1766STK=y CONFIG_BOARD_LOOPSPERMSEC=8111 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/olimex-lpc1766stk/nsh/defconfig b/nuttx/configs/olimex-lpc1766stk/nsh/defconfig index b234b77a1..90b4af8cd 100755 --- a/nuttx/configs/olimex-lpc1766stk/nsh/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/nsh/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_LPC1766STK=y CONFIG_BOARD_LOOPSPERMSEC=8111 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/olimex-lpc1766stk/nx/defconfig b/nuttx/configs/olimex-lpc1766stk/nx/defconfig index 696ee655c..5a5525c7f 100755 --- a/nuttx/configs/olimex-lpc1766stk/nx/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/nx/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_LPC1766STK=y CONFIG_BOARD_LOOPSPERMSEC=8111 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/olimex-lpc1766stk/ostest/defconfig b/nuttx/configs/olimex-lpc1766stk/ostest/defconfig index 2628aa1fa..c44d800e1 100755 --- a/nuttx/configs/olimex-lpc1766stk/ostest/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/ostest/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_LPC1766STK=y CONFIG_BOARD_LOOPSPERMSEC=8111 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/olimex-lpc1766stk/slip-httpd/defconfig b/nuttx/configs/olimex-lpc1766stk/slip-httpd/defconfig index 0a9bae2c8..dcde1987e 100755 --- a/nuttx/configs/olimex-lpc1766stk/slip-httpd/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/slip-httpd/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_LPC1766STK=y CONFIG_BOARD_LOOPSPERMSEC=8111 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/olimex-lpc1766stk/thttpd/defconfig b/nuttx/configs/olimex-lpc1766stk/thttpd/defconfig index 82b4e8ebf..eadb38629 100755 --- a/nuttx/configs/olimex-lpc1766stk/thttpd/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/thttpd/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_LPC1766STK=y CONFIG_BOARD_LOOPSPERMSEC=8111 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/olimex-lpc1766stk/usbserial/defconfig b/nuttx/configs/olimex-lpc1766stk/usbserial/defconfig index 2e2049cf8..5adb89207 100755 --- a/nuttx/configs/olimex-lpc1766stk/usbserial/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/usbserial/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_LPC1766STK=y CONFIG_BOARD_LOOPSPERMSEC=8111 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/olimex-lpc1766stk/usbstorage/defconfig b/nuttx/configs/olimex-lpc1766stk/usbstorage/defconfig index 75b161269..ac2a4a384 100755 --- a/nuttx/configs/olimex-lpc1766stk/usbstorage/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/usbstorage/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_LPC1766STK=y CONFIG_BOARD_LOOPSPERMSEC=8111 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/olimex-lpc1766stk/wlan/defconfig b/nuttx/configs/olimex-lpc1766stk/wlan/defconfig index b8583e81d..d0f80b550 100755 --- a/nuttx/configs/olimex-lpc1766stk/wlan/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/wlan/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_LPC1766STK=y CONFIG_BOARD_LOOPSPERMSEC=8111 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/olimex-lpc2378/nsh/defconfig b/nuttx/configs/olimex-lpc2378/nsh/defconfig index fc9f29e29..b029dbc75 100755 --- a/nuttx/configs/olimex-lpc2378/nsh/defconfig +++ b/nuttx/configs/olimex-lpc2378/nsh/defconfig @@ -78,7 +78,6 @@ CONFIG_BOARD_LOOPSPERMSEC=3270 CONFIG_ARCH_LEDS=y CONFIG_DRAM_SIZE=0x00008000 CONFIG_DRAM_START=0x40000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_INTERRUPTSTACK= CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/olimex-lpc2378/ostest/defconfig b/nuttx/configs/olimex-lpc2378/ostest/defconfig index c83e92a68..f971212b5 100755 --- a/nuttx/configs/olimex-lpc2378/ostest/defconfig +++ b/nuttx/configs/olimex-lpc2378/ostest/defconfig @@ -78,7 +78,6 @@ CONFIG_BOARD_LOOPSPERMSEC=3270 CONFIG_ARCH_LEDS=y CONFIG_DRAM_SIZE=0x00008000 CONFIG_DRAM_START=0x40000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_INTERRUPTSTACK= CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/olimex-strp711/nettest/defconfig b/nuttx/configs/olimex-strp711/nettest/defconfig index f740b18ae..6af2cb17a 100755 --- a/nuttx/configs/olimex-strp711/nettest/defconfig +++ b/nuttx/configs/olimex-strp711/nettest/defconfig @@ -79,7 +79,6 @@ CONFIG_ARCH_LEDS=y CONFIG_ARCH_BUTTONS=y CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_INTERRUPTSTACK=0 CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/olimex-strp711/nsh/defconfig b/nuttx/configs/olimex-strp711/nsh/defconfig index c279dd75b..85b4c503a 100644 --- a/nuttx/configs/olimex-strp711/nsh/defconfig +++ b/nuttx/configs/olimex-strp711/nsh/defconfig @@ -79,7 +79,6 @@ CONFIG_ARCH_LEDS=y CONFIG_ARCH_BUTTONS=y CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_INTERRUPTSTACK=0 CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/olimex-strp711/ostest/defconfig b/nuttx/configs/olimex-strp711/ostest/defconfig index 412c69367..250a68ad2 100644 --- a/nuttx/configs/olimex-strp711/ostest/defconfig +++ b/nuttx/configs/olimex-strp711/ostest/defconfig @@ -79,7 +79,6 @@ CONFIG_ARCH_LEDS=y CONFIG_ARCH_BUTTONS=y CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_INTERRUPTSTACK=0 CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/pcblogic-pic32mx/README.txt b/nuttx/configs/pcblogic-pic32mx/README.txt index 37836bc58..c15bd45a0 100644 --- a/nuttx/configs/pcblogic-pic32mx/README.txt +++ b/nuttx/configs/pcblogic-pic32mx/README.txt @@ -384,10 +384,6 @@ PIC32MX Configuration Options CONFIG_DRAM_START=0xa0000000 - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_ARCH_IRQPRIO - The PIC32MXx supports interrupt prioritization CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/pcblogic-pic32mx/nsh/defconfig b/nuttx/configs/pcblogic-pic32mx/nsh/defconfig index 5386fac86..e5f0a2909 100644 --- a/nuttx/configs/pcblogic-pic32mx/nsh/defconfig +++ b/nuttx/configs/pcblogic-pic32mx/nsh/defconfig @@ -52,7 +52,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_NOINTC - define if the architecture does not # support an interrupt controller or otherwise cannot support # APIs like up_enable_irq() and up_disable_irq(). @@ -92,7 +91,6 @@ CONFIG_ARCH_BOARD_PCBLOGICPIC32MX=y CONFIG_BOARD_LOOPSPERMSEC=8079 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0xa0000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_NOINTC=n CONFIG_ARCH_VECNOTIRQ=y CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/pcblogic-pic32mx/ostest/defconfig b/nuttx/configs/pcblogic-pic32mx/ostest/defconfig index 89f88bae8..802ab48cc 100644 --- a/nuttx/configs/pcblogic-pic32mx/ostest/defconfig +++ b/nuttx/configs/pcblogic-pic32mx/ostest/defconfig @@ -52,7 +52,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_NOINTC - define if the architecture does not # support an interrupt controller or otherwise cannot support # APIs like up_enable_irq() and up_disable_irq(). @@ -92,7 +91,6 @@ CONFIG_ARCH_BOARD_PCBLOGICPIC32MX=y CONFIG_BOARD_LOOPSPERMSEC=8079 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0xa0000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_NOINTC=n CONFIG_ARCH_VECNOTIRQ=y CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/pic32-starterkit/README.txt b/nuttx/configs/pic32-starterkit/README.txt index e8c62bf0f..31d84798c 100644 --- a/nuttx/configs/pic32-starterkit/README.txt +++ b/nuttx/configs/pic32-starterkit/README.txt @@ -831,10 +831,6 @@ PIC32MX Configuration Options CONFIG_DRAM_START=0xa0000000 - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_ARCH_IRQPRIO - The PIC32MXx supports interrupt prioritization CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/pic32-starterkit/nsh/defconfig b/nuttx/configs/pic32-starterkit/nsh/defconfig index 6eb4f4cc6..bdfeb770d 100644 --- a/nuttx/configs/pic32-starterkit/nsh/defconfig +++ b/nuttx/configs/pic32-starterkit/nsh/defconfig @@ -54,7 +54,6 @@ # the delay actually is 100 seconds. # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_NOINTC - define if the architecture does not # support an interrupt controller or otherwise cannot support # APIs like up_enable_irq() and up_disable_irq(). @@ -91,7 +90,6 @@ CONFIG_ARCH_BOARD_PIC32_STARTERKIT=y CONFIG_BOARD_LOOPSPERMSEC=7245 CONFIG_DRAM_SIZE=(128*1024) CONFIG_DRAM_START=0xa0000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_NOINTC=n CONFIG_ARCH_VECNOTIRQ=y CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/pic32-starterkit/nsh2/defconfig b/nuttx/configs/pic32-starterkit/nsh2/defconfig index 2af37faf9..f3e754b7e 100644 --- a/nuttx/configs/pic32-starterkit/nsh2/defconfig +++ b/nuttx/configs/pic32-starterkit/nsh2/defconfig @@ -54,7 +54,6 @@ # the delay actually is 100 seconds. # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_NOINTC - define if the architecture does not # support an interrupt controller or otherwise cannot support # APIs like up_enable_irq() and up_disable_irq(). @@ -91,7 +90,6 @@ CONFIG_ARCH_BOARD_PIC32_STARTERKIT=y CONFIG_BOARD_LOOPSPERMSEC=7245 CONFIG_DRAM_SIZE=(128*1024) CONFIG_DRAM_START=0xa0000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_NOINTC=n CONFIG_ARCH_VECNOTIRQ=y CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/pic32-starterkit/ostest/defconfig b/nuttx/configs/pic32-starterkit/ostest/defconfig index a8bb1af9f..4f5c9d005 100644 --- a/nuttx/configs/pic32-starterkit/ostest/defconfig +++ b/nuttx/configs/pic32-starterkit/ostest/defconfig @@ -54,7 +54,6 @@ # the delay actually is 100 seconds. # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_NOINTC - define if the architecture does not # support an interrupt controller or otherwise cannot support # APIs like up_enable_irq() and up_disable_irq(). @@ -91,7 +90,6 @@ CONFIG_ARCH_BOARD_PIC32_STARTERKIT=y CONFIG_BOARD_LOOPSPERMSEC=7245 CONFIG_DRAM_SIZE=(128*1024) CONFIG_DRAM_START=0xa0000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_NOINTC=n CONFIG_ARCH_VECNOTIRQ=y CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/pic32mx7mmb/README.txt b/nuttx/configs/pic32mx7mmb/README.txt index 5c079d204..adf83e2f4 100644 --- a/nuttx/configs/pic32mx7mmb/README.txt +++ b/nuttx/configs/pic32mx7mmb/README.txt @@ -409,10 +409,6 @@ PIC32MX Configuration Options CONFIG_DRAM_START=0xa0000000 - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_ARCH_IRQPRIO - The PIC32MXx supports interrupt prioritization CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/pic32mx7mmb/nsh/defconfig b/nuttx/configs/pic32mx7mmb/nsh/defconfig index a9d237007..412e0a2df 100644 --- a/nuttx/configs/pic32mx7mmb/nsh/defconfig +++ b/nuttx/configs/pic32mx7mmb/nsh/defconfig @@ -54,7 +54,6 @@ # the delay actually is 100 seconds. # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_NOINTC - define if the architecture does not # support an interrupt controller or otherwise cannot support # APIs like up_enable_irq() and up_disable_irq(). @@ -91,7 +90,6 @@ CONFIG_ARCH_BOARD_PIC32MX7MMB=y CONFIG_BOARD_LOOPSPERMSEC=7245 CONFIG_DRAM_SIZE=(128*1024) CONFIG_DRAM_START=0xa0000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_NOINTC=n CONFIG_ARCH_VECNOTIRQ=y CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/pic32mx7mmb/ostest/defconfig b/nuttx/configs/pic32mx7mmb/ostest/defconfig index fd897e34d..691dbab8e 100644 --- a/nuttx/configs/pic32mx7mmb/ostest/defconfig +++ b/nuttx/configs/pic32mx7mmb/ostest/defconfig @@ -54,7 +54,6 @@ # the delay actually is 100 seconds. # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_NOINTC - define if the architecture does not # support an interrupt controller or otherwise cannot support # APIs like up_enable_irq() and up_disable_irq(). @@ -91,7 +90,6 @@ CONFIG_ARCH_BOARD_PIC32MX7MMB=y CONFIG_BOARD_LOOPSPERMSEC=7245 CONFIG_DRAM_SIZE=(128*1024) CONFIG_DRAM_START=0xa0000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_NOINTC=n CONFIG_ARCH_VECNOTIRQ=y CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/qemu-i486/nsh/defconfig b/nuttx/configs/qemu-i486/nsh/defconfig index 03d0351da..9b9f1a3f2 100644 --- a/nuttx/configs/qemu-i486/nsh/defconfig +++ b/nuttx/configs/qemu-i486/nsh/defconfig @@ -48,7 +48,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_NOINTC - define if the architecture does not # support an interrupt controller or otherwise cannot support # APIs like up_enable_irq() and up_disable_irq(). @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_QEMU_I486=y CONFIG_BOARD_LOOPSPERMSEC=999 CONFIG_DRAM_SIZE=0x00100000 CONFIG_DRAM_START=0x00100000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_NOINTC=n CONFIG_ARCH_STACKDUMP=y CONFIG_ARCH_LEDS=n diff --git a/nuttx/configs/qemu-i486/ostest/defconfig b/nuttx/configs/qemu-i486/ostest/defconfig index d5c1cc494..3bdef6c95 100644 --- a/nuttx/configs/qemu-i486/ostest/defconfig +++ b/nuttx/configs/qemu-i486/ostest/defconfig @@ -48,7 +48,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_NOINTC - define if the architecture does not # support an interrupt controller or otherwise cannot support # APIs like up_enable_irq() and up_disable_irq(). @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_QEMU_I486=y CONFIG_BOARD_LOOPSPERMSEC=999 CONFIG_DRAM_SIZE=0x00100000 CONFIG_DRAM_START=0x00100000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_NOINTC=n CONFIG_ARCH_STACKDUMP=y CONFIG_ARCH_LEDS=n diff --git a/nuttx/configs/sam3u-ek/README.txt b/nuttx/configs/sam3u-ek/README.txt index 510d2f1e6..cb0b82c8f 100755 --- a/nuttx/configs/sam3u-ek/README.txt +++ b/nuttx/configs/sam3u-ek/README.txt @@ -233,10 +233,6 @@ SAM3U-EK-specific Configuration Options CONFIG_DRAM_START=0x20000000 - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_ARCH_IRQPRIO - The SAM3UF103Z supports interrupt prioritization CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/sam3u-ek/knsh/defconfig b/nuttx/configs/sam3u-ek/knsh/defconfig index ebb40af67..766eada4a 100755 --- a/nuttx/configs/sam3u-ek/knsh/defconfig +++ b/nuttx/configs/sam3u-ek/knsh/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_SAM3UEK=y CONFIG_BOARD_LOOPSPERMSEC=4768 CONFIG_DRAM_SIZE=0x00008000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/sam3u-ek/nsh/defconfig b/nuttx/configs/sam3u-ek/nsh/defconfig index 487c24c64..05c9f5ddd 100755 --- a/nuttx/configs/sam3u-ek/nsh/defconfig +++ b/nuttx/configs/sam3u-ek/nsh/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_SAM3UEK=y CONFIG_BOARD_LOOPSPERMSEC=4768 CONFIG_DRAM_SIZE=0x00008000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/sam3u-ek/nx/defconfig b/nuttx/configs/sam3u-ek/nx/defconfig index 0be6c0003..7d799b9ff 100755 --- a/nuttx/configs/sam3u-ek/nx/defconfig +++ b/nuttx/configs/sam3u-ek/nx/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_SAM3UEK=y CONFIG_BOARD_LOOPSPERMSEC=4768 CONFIG_DRAM_SIZE=0x00008000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/sam3u-ek/ostest/defconfig b/nuttx/configs/sam3u-ek/ostest/defconfig index 5fe5d065a..832c96163 100755 --- a/nuttx/configs/sam3u-ek/ostest/defconfig +++ b/nuttx/configs/sam3u-ek/ostest/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_SAM3UEK=y CONFIG_BOARD_LOOPSPERMSEC=4768 CONFIG_DRAM_SIZE=0x00008000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/sam3u-ek/touchscreen/defconfig b/nuttx/configs/sam3u-ek/touchscreen/defconfig index 30e5ed6e8..7e56a949e 100755 --- a/nuttx/configs/sam3u-ek/touchscreen/defconfig +++ b/nuttx/configs/sam3u-ek/touchscreen/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_SAM3UEK=y CONFIG_BOARD_LOOPSPERMSEC=4768 CONFIG_DRAM_SIZE=0x00008000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/skp16c26/ostest/defconfig b/nuttx/configs/skp16c26/ostest/defconfig index 6ab7318e6..f9fccf4bf 100644 --- a/nuttx/configs/skp16c26/ostest/defconfig +++ b/nuttx/configs/skp16c26/ostest/defconfig @@ -53,7 +53,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the internal SRAM. # CONFIG_DRAM_START - The start address of internal SRAM -# CONFIG_DRAM_END - The end+1 address of internal SRAM # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt # stack in bytes. If not defined, the user task stacks will be @@ -73,7 +72,6 @@ CONFIG_ARCH_NOINTC=y CONFIG_ENDIAN_BIG=y CONFIG_DRAM_SIZE=0x00800 CONFIG_DRAM_START=0x00400 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_BOARD_LOOPSPERMSEC=16945 CONFIG_ARCH_INTERRUPTSTACK=128 CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/stm3210e-eval/README.txt b/nuttx/configs/stm3210e-eval/README.txt index 975e85ced..0d292565e 100755 --- a/nuttx/configs/stm3210e-eval/README.txt +++ b/nuttx/configs/stm3210e-eval/README.txt @@ -419,10 +419,6 @@ STM3210E-EVAL-specific Configuration Options CONFIG_DRAM_START=0x20000000 - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_ARCH_IRQPRIO - The STM32F103Z supports interrupt prioritization CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/stm3210e-eval/RIDE/defconfig b/nuttx/configs/stm3210e-eval/RIDE/defconfig index 0def352a8..b7d628b50 100755 --- a/nuttx/configs/stm3210e-eval/RIDE/defconfig +++ b/nuttx/configs/stm3210e-eval/RIDE/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_STM3210E_EVAL=y CONFIG_BOARD_LOOPSPERMSEC=5483 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/stm3210e-eval/buttons/defconfig b/nuttx/configs/stm3210e-eval/buttons/defconfig index bcae6fccc..e1ea2cfc0 100644 --- a/nuttx/configs/stm3210e-eval/buttons/defconfig +++ b/nuttx/configs/stm3210e-eval/buttons/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -80,7 +79,6 @@ CONFIG_ARCH_BOARD_STM3210E_EVAL=y CONFIG_BOARD_LOOPSPERMSEC=5483 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/stm3210e-eval/composite/defconfig b/nuttx/configs/stm3210e-eval/composite/defconfig index 3c7e83f14..62d9eb07f 100755 --- a/nuttx/configs/stm3210e-eval/composite/defconfig +++ b/nuttx/configs/stm3210e-eval/composite/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_STM3210E_EVAL=y CONFIG_BOARD_LOOPSPERMSEC=5483 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/stm3210e-eval/nsh/defconfig b/nuttx/configs/stm3210e-eval/nsh/defconfig index 982ab281e..c4245b133 100755 --- a/nuttx/configs/stm3210e-eval/nsh/defconfig +++ b/nuttx/configs/stm3210e-eval/nsh/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_STM3210E_EVAL=y CONFIG_BOARD_LOOPSPERMSEC=5483 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/stm3210e-eval/nsh2/defconfig b/nuttx/configs/stm3210e-eval/nsh2/defconfig index ebe8fc5be..22afd76f9 100644 --- a/nuttx/configs/stm3210e-eval/nsh2/defconfig +++ b/nuttx/configs/stm3210e-eval/nsh2/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_STM3210E_EVAL=y CONFIG_BOARD_LOOPSPERMSEC=5483 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/stm3210e-eval/nx/defconfig b/nuttx/configs/stm3210e-eval/nx/defconfig index 5488ae891..a3514b096 100644 --- a/nuttx/configs/stm3210e-eval/nx/defconfig +++ b/nuttx/configs/stm3210e-eval/nx/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_STM3210E_EVAL=y CONFIG_BOARD_LOOPSPERMSEC=5483 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/stm3210e-eval/nxconsole/defconfig b/nuttx/configs/stm3210e-eval/nxconsole/defconfig index a84fc8134..261e09bb9 100644 --- a/nuttx/configs/stm3210e-eval/nxconsole/defconfig +++ b/nuttx/configs/stm3210e-eval/nxconsole/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_STM3210E_EVAL=y CONFIG_BOARD_LOOPSPERMSEC=5483 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/stm3210e-eval/nxlines/defconfig b/nuttx/configs/stm3210e-eval/nxlines/defconfig index b1e4f960a..8e4ee57e7 100644 --- a/nuttx/configs/stm3210e-eval/nxlines/defconfig +++ b/nuttx/configs/stm3210e-eval/nxlines/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_STM3210E_EVAL=y CONFIG_BOARD_LOOPSPERMSEC=5483 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/stm3210e-eval/nxtext/defconfig b/nuttx/configs/stm3210e-eval/nxtext/defconfig index 097287fb4..b90364ec8 100644 --- a/nuttx/configs/stm3210e-eval/nxtext/defconfig +++ b/nuttx/configs/stm3210e-eval/nxtext/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_STM3210E_EVAL=y CONFIG_BOARD_LOOPSPERMSEC=5483 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/stm3210e-eval/ostest/defconfig b/nuttx/configs/stm3210e-eval/ostest/defconfig index f70ba0a81..9238a59a9 100755 --- a/nuttx/configs/stm3210e-eval/ostest/defconfig +++ b/nuttx/configs/stm3210e-eval/ostest/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_STM3210E_EVAL=y CONFIG_BOARD_LOOPSPERMSEC=5483 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/stm3210e-eval/pm/defconfig b/nuttx/configs/stm3210e-eval/pm/defconfig index 2e135dbef..f2b47598b 100644 --- a/nuttx/configs/stm3210e-eval/pm/defconfig +++ b/nuttx/configs/stm3210e-eval/pm/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_STM3210E_EVAL=y CONFIG_BOARD_LOOPSPERMSEC=5483 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/stm3210e-eval/usbserial/defconfig b/nuttx/configs/stm3210e-eval/usbserial/defconfig index e0c17d7f7..28af3b1ca 100755 --- a/nuttx/configs/stm3210e-eval/usbserial/defconfig +++ b/nuttx/configs/stm3210e-eval/usbserial/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_STM3210E_EVAL=y CONFIG_BOARD_LOOPSPERMSEC=5483 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/stm3210e-eval/usbstorage/defconfig b/nuttx/configs/stm3210e-eval/usbstorage/defconfig index aef6d11c2..0109f2da4 100755 --- a/nuttx/configs/stm3210e-eval/usbstorage/defconfig +++ b/nuttx/configs/stm3210e-eval/usbstorage/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_STM3210E_EVAL=y CONFIG_BOARD_LOOPSPERMSEC=5483 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/stm3220g-eval/README.txt b/nuttx/configs/stm3220g-eval/README.txt index a064503f1..43d9b382e 100644 --- a/nuttx/configs/stm3220g-eval/README.txt +++ b/nuttx/configs/stm3220g-eval/README.txt @@ -468,10 +468,6 @@ STM3220G-EVAL-specific Configuration Options CONFIG_DRAM_START=0x20000000 - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - In addition to internal SRAM, SRAM may also be available through the FSMC. In order to use FSMC SRAM, the following additional things need to be present in the NuttX configuration file: diff --git a/nuttx/configs/stm3220g-eval/dhcpd/defconfig b/nuttx/configs/stm3220g-eval/dhcpd/defconfig index e01d3cf91..c71d7cfed 100644 --- a/nuttx/configs/stm3220g-eval/dhcpd/defconfig +++ b/nuttx/configs/stm3220g-eval/dhcpd/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The STM3220xxx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_STM3220G_EVAL=y CONFIG_BOARD_LOOPSPERMSEC=16717 CONFIG_DRAM_SIZE=0x00030000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/stm3220g-eval/nettest/defconfig b/nuttx/configs/stm3220g-eval/nettest/defconfig index 3be35afa4..56a205e4b 100644 --- a/nuttx/configs/stm3220g-eval/nettest/defconfig +++ b/nuttx/configs/stm3220g-eval/nettest/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The STM3220xxx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_STM3220G_EVAL=y CONFIG_BOARD_LOOPSPERMSEC=16717 CONFIG_DRAM_SIZE=0x00030000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/stm3220g-eval/nsh/defconfig b/nuttx/configs/stm3220g-eval/nsh/defconfig index 09462fc56..a0f7a64be 100644 --- a/nuttx/configs/stm3220g-eval/nsh/defconfig +++ b/nuttx/configs/stm3220g-eval/nsh/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The STM3220xxx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_STM3220G_EVAL=y CONFIG_BOARD_LOOPSPERMSEC=16717 CONFIG_DRAM_SIZE=0x00030000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/stm3220g-eval/nsh2/defconfig b/nuttx/configs/stm3220g-eval/nsh2/defconfig index 8a9dbf07f..08f0b0f26 100644 --- a/nuttx/configs/stm3220g-eval/nsh2/defconfig +++ b/nuttx/configs/stm3220g-eval/nsh2/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The STM3220xxx supports interrupt prioritization # (But, unfortunately, GCC does not support it). # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt @@ -80,7 +79,6 @@ CONFIG_ARCH_BOARD_STM3220G_EVAL=y CONFIG_BOARD_LOOPSPERMSEC=16717 CONFIG_DRAM_SIZE=0x00030000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/stm3220g-eval/nxwm/defconfig b/nuttx/configs/stm3220g-eval/nxwm/defconfig index bf5569a9c..d49b8c765 100644 --- a/nuttx/configs/stm3220g-eval/nxwm/defconfig +++ b/nuttx/configs/stm3220g-eval/nxwm/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The STM3220xxx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_STM3220G_EVAL=y CONFIG_BOARD_LOOPSPERMSEC=16717 CONFIG_DRAM_SIZE=0x00030000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/stm3220g-eval/ostest/defconfig b/nuttx/configs/stm3220g-eval/ostest/defconfig index 663efded4..8eb5e5ec1 100644 --- a/nuttx/configs/stm3220g-eval/ostest/defconfig +++ b/nuttx/configs/stm3220g-eval/ostest/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The STM3220xxx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_STM3220G_EVAL=y CONFIG_BOARD_LOOPSPERMSEC=16717 CONFIG_DRAM_SIZE=0x00030000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/stm3220g-eval/telnetd/defconfig b/nuttx/configs/stm3220g-eval/telnetd/defconfig index f9d588ad1..f96f6d76a 100644 --- a/nuttx/configs/stm3220g-eval/telnetd/defconfig +++ b/nuttx/configs/stm3220g-eval/telnetd/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The STM3220xxx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_STM3220G_EVAL=y CONFIG_BOARD_LOOPSPERMSEC=16717 CONFIG_DRAM_SIZE=0x00030000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/stm3240g-eval/README.txt b/nuttx/configs/stm3240g-eval/README.txt index 59d12a884..49e939a23 100755 --- a/nuttx/configs/stm3240g-eval/README.txt +++ b/nuttx/configs/stm3240g-eval/README.txt @@ -582,10 +582,6 @@ STM3240G-EVAL-specific Configuration Options CONFIG_DRAM_START=0x20000000 - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_STM32_CCMEXCLUDE - Exclude CCM SRAM from the HEAP In addition to internal SRAM, SRAM may also be available through the FSMC. diff --git a/nuttx/configs/stm3240g-eval/dhcpd/defconfig b/nuttx/configs/stm3240g-eval/dhcpd/defconfig index 81d132143..a4c26bc4d 100644 --- a/nuttx/configs/stm3240g-eval/dhcpd/defconfig +++ b/nuttx/configs/stm3240g-eval/dhcpd/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The STM3240xxx supports interrupt prioritization # CONFIG_ARCH_FPU - The STM3240xxx supports a floating point unit (FPU) # (But, unfortunately, GCC does not support it). @@ -81,7 +80,6 @@ CONFIG_ARCH_BOARD_STM3240G_EVAL=y CONFIG_BOARD_LOOPSPERMSEC=16717 CONFIG_DRAM_SIZE=0x00030000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_FPU=n CONFIG_ARCH_INTERRUPTSTACK=n diff --git a/nuttx/configs/stm3240g-eval/nettest/defconfig b/nuttx/configs/stm3240g-eval/nettest/defconfig index 76f39275f..d3b2af33a 100644 --- a/nuttx/configs/stm3240g-eval/nettest/defconfig +++ b/nuttx/configs/stm3240g-eval/nettest/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The STM3240xxx supports interrupt prioritization # CONFIG_ARCH_FPU - The STM3240xxx supports a floating point unit (FPU) # (But, unfortunately, GCC does not support it). @@ -81,7 +80,6 @@ CONFIG_ARCH_BOARD_STM3240G_EVAL=y CONFIG_BOARD_LOOPSPERMSEC=16717 CONFIG_DRAM_SIZE=0x00030000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_FPU=n CONFIG_ARCH_INTERRUPTSTACK=n diff --git a/nuttx/configs/stm3240g-eval/nsh/defconfig b/nuttx/configs/stm3240g-eval/nsh/defconfig index 16c6258f3..2f4c32327 100644 --- a/nuttx/configs/stm3240g-eval/nsh/defconfig +++ b/nuttx/configs/stm3240g-eval/nsh/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The STM3240xxx supports interrupt prioritization # CONFIG_ARCH_FPU - The STM3240xxx supports a floating point unit (FPU) # (But, unfortunately, GCC does not support it). @@ -81,7 +80,6 @@ CONFIG_ARCH_BOARD_STM3240G_EVAL=y CONFIG_BOARD_LOOPSPERMSEC=16717 CONFIG_DRAM_SIZE=0x00030000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_FPU=n CONFIG_ARCH_INTERRUPTSTACK=n diff --git a/nuttx/configs/stm3240g-eval/nsh2/defconfig b/nuttx/configs/stm3240g-eval/nsh2/defconfig index 9a35fd75f..c4b9df773 100644 --- a/nuttx/configs/stm3240g-eval/nsh2/defconfig +++ b/nuttx/configs/stm3240g-eval/nsh2/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The STM3240xxx supports interrupt prioritization # CONFIG_ARCH_FPU - The STM3240xxx supports a floating point unit (FPU) # (But, unfortunately, GCC does not support it). @@ -81,7 +80,6 @@ CONFIG_ARCH_BOARD_STM3240G_EVAL=y CONFIG_BOARD_LOOPSPERMSEC=16717 CONFIG_DRAM_SIZE=0x00030000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_FPU=n CONFIG_ARCH_INTERRUPTSTACK=n diff --git a/nuttx/configs/stm3240g-eval/nxconsole/defconfig b/nuttx/configs/stm3240g-eval/nxconsole/defconfig index 57e6a19e5..3c9f15e2d 100644 --- a/nuttx/configs/stm3240g-eval/nxconsole/defconfig +++ b/nuttx/configs/stm3240g-eval/nxconsole/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The STM3240xxx supports interrupt prioritization # CONFIG_ARCH_FPU - The STM3240xxx supports a floating point unit (FPU) # (But, unfortunately, GCC does not support it). @@ -81,7 +80,6 @@ CONFIG_ARCH_BOARD_STM3240G_EVAL=y CONFIG_BOARD_LOOPSPERMSEC=16717 CONFIG_DRAM_SIZE=0x00030000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_FPU=n CONFIG_ARCH_INTERRUPTSTACK=n diff --git a/nuttx/configs/stm3240g-eval/nxwm/defconfig b/nuttx/configs/stm3240g-eval/nxwm/defconfig index ff44fa285..381627970 100644 --- a/nuttx/configs/stm3240g-eval/nxwm/defconfig +++ b/nuttx/configs/stm3240g-eval/nxwm/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The STM3240xxx supports interrupt prioritization # CONFIG_ARCH_FPU - The STM3240xxx supports a floating point unit (FPU) # (But, unfortunately, GCC does not support it). @@ -81,7 +80,6 @@ CONFIG_ARCH_BOARD_STM3240G_EVAL=y CONFIG_BOARD_LOOPSPERMSEC=16717 CONFIG_DRAM_SIZE=0x00030000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_FPU=n CONFIG_ARCH_INTERRUPTSTACK=n diff --git a/nuttx/configs/stm3240g-eval/ostest/defconfig b/nuttx/configs/stm3240g-eval/ostest/defconfig index 98e3aa318..bfe63c136 100644 --- a/nuttx/configs/stm3240g-eval/ostest/defconfig +++ b/nuttx/configs/stm3240g-eval/ostest/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The STM3240xxx supports interrupt prioritization # CONFIG_ARCH_FPU - The STM3240xxx supports a floating point unit (FPU) # (But, unfortunately, GCC does not support it). @@ -81,7 +80,6 @@ CONFIG_ARCH_BOARD_STM3240G_EVAL=y CONFIG_BOARD_LOOPSPERMSEC=16717 CONFIG_DRAM_SIZE=0x00030000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_FPU=n CONFIG_ARCH_INTERRUPTSTACK=n diff --git a/nuttx/configs/stm3240g-eval/telnetd/defconfig b/nuttx/configs/stm3240g-eval/telnetd/defconfig index f75fb4639..3ca3dd87c 100644 --- a/nuttx/configs/stm3240g-eval/telnetd/defconfig +++ b/nuttx/configs/stm3240g-eval/telnetd/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The STM3240xxx supports interrupt prioritization # CONFIG_ARCH_FPU - The STM3240xxx supports a floating point unit (FPU) # (But, unfortunately, GCC does not support it). @@ -81,7 +80,6 @@ CONFIG_ARCH_BOARD_STM3240G_EVAL=y CONFIG_BOARD_LOOPSPERMSEC=16717 CONFIG_DRAM_SIZE=0x00030000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_FPU=n CONFIG_ARCH_INTERRUPTSTACK=n diff --git a/nuttx/configs/stm32f4discovery/README.txt b/nuttx/configs/stm32f4discovery/README.txt index 387a76431..09a2bb2b0 100755 --- a/nuttx/configs/stm32f4discovery/README.txt +++ b/nuttx/configs/stm32f4discovery/README.txt @@ -695,10 +695,6 @@ STM32F4Discovery-specific Configuration Options CONFIG_DRAM_START=0x20000000 - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_STM32_CCMEXCLUDE - Exclude CCM SRAM from the HEAP In addition to internal SRAM, SRAM may also be available through the FSMC. diff --git a/nuttx/configs/stm32f4discovery/nsh/defconfig b/nuttx/configs/stm32f4discovery/nsh/defconfig index 2280bbf9a..4be8ea791 100644 --- a/nuttx/configs/stm32f4discovery/nsh/defconfig +++ b/nuttx/configs/stm32f4discovery/nsh/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The STM32F4Discovery supports interrupt prioritization # CONFIG_ARCH_FPU - The STM32F4Discovery supports a floating point unit (FPU) # (But, unfortunately, GCC does not support it). @@ -81,7 +80,6 @@ CONFIG_ARCH_BOARD_STM32F4_DISCOVERY=y CONFIG_BOARD_LOOPSPERMSEC=16717 CONFIG_DRAM_SIZE=0x00030000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_FPU=n CONFIG_ARCH_INTERRUPTSTACK=n diff --git a/nuttx/configs/stm32f4discovery/nxlines/defconfig b/nuttx/configs/stm32f4discovery/nxlines/defconfig index c5515c426..28dd44adc 100644 --- a/nuttx/configs/stm32f4discovery/nxlines/defconfig +++ b/nuttx/configs/stm32f4discovery/nxlines/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The STM32F4Discovery supports interrupt prioritization # CONFIG_ARCH_FPU - The STM32F4Discovery supports a floating point unit (FPU) # (But, unfortunately, GCC does not support it). @@ -81,7 +80,6 @@ CONFIG_ARCH_BOARD_STM32F4_DISCOVERY=y CONFIG_BOARD_LOOPSPERMSEC=16717 CONFIG_DRAM_SIZE=0x00030000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_FPU=n CONFIG_ARCH_INTERRUPTSTACK=n diff --git a/nuttx/configs/stm32f4discovery/ostest/defconfig b/nuttx/configs/stm32f4discovery/ostest/defconfig index a984d26a1..066fb4017 100644 --- a/nuttx/configs/stm32f4discovery/ostest/defconfig +++ b/nuttx/configs/stm32f4discovery/ostest/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The STM32F4Discovery supports interrupt prioritization # CONFIG_ARCH_FPU - The STM32F4Discovery supports a floating point unit (FPU) # (But, unfortunately, GCC does not support it). @@ -81,7 +80,6 @@ CONFIG_ARCH_BOARD_STM32F4_DISCOVERY=y CONFIG_BOARD_LOOPSPERMSEC=16717 CONFIG_DRAM_SIZE=0x00030000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_FPU=n CONFIG_ARCH_INTERRUPTSTACK=n diff --git a/nuttx/configs/stm32f4discovery/pm/defconfig b/nuttx/configs/stm32f4discovery/pm/defconfig index 49ced0006..136c5c1f2 100644 --- a/nuttx/configs/stm32f4discovery/pm/defconfig +++ b/nuttx/configs/stm32f4discovery/pm/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The STM32F4Discovery supports interrupt prioritization # CONFIG_ARCH_FPU - The STM32F4Discovery supports a floating point unit (FPU) # (But, unfortunately, GCC does not support it). @@ -81,7 +80,6 @@ CONFIG_ARCH_BOARD_STM32F4_DISCOVERY=y CONFIG_BOARD_LOOPSPERMSEC=16717 CONFIG_DRAM_SIZE=0x00030000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_FPU=n CONFIG_ARCH_INTERRUPTSTACK=n diff --git a/nuttx/configs/sure-pic32mx/README.txt b/nuttx/configs/sure-pic32mx/README.txt index bd206a262..ad9835698 100644 --- a/nuttx/configs/sure-pic32mx/README.txt +++ b/nuttx/configs/sure-pic32mx/README.txt @@ -456,10 +456,6 @@ PIC32MX Configuration Options CONFIG_DRAM_START=0xa0000000 - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_ARCH_IRQPRIO - The PIC32MXx supports interrupt prioritization CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/sure-pic32mx/nsh/defconfig b/nuttx/configs/sure-pic32mx/nsh/defconfig index a49a1a4f5..926aac26b 100644 --- a/nuttx/configs/sure-pic32mx/nsh/defconfig +++ b/nuttx/configs/sure-pic32mx/nsh/defconfig @@ -54,7 +54,6 @@ # the delay actually is 100 seconds. # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_NOINTC - define if the architecture does not # support an interrupt controller or otherwise cannot support # APIs like up_enable_irq() and up_disable_irq(). @@ -93,7 +92,6 @@ CONFIG_ARCH_DBDP11212=n CONFIG_BOARD_LOOPSPERMSEC=4275 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0xa0000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_NOINTC=n CONFIG_ARCH_VECNOTIRQ=y CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/sure-pic32mx/ostest/defconfig b/nuttx/configs/sure-pic32mx/ostest/defconfig index 960298699..4ddbdbc9a 100644 --- a/nuttx/configs/sure-pic32mx/ostest/defconfig +++ b/nuttx/configs/sure-pic32mx/ostest/defconfig @@ -54,7 +54,6 @@ # the delay actually is 100 seconds. # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_NOINTC - define if the architecture does not # support an interrupt controller or otherwise cannot support # APIs like up_enable_irq() and up_disable_irq(). @@ -93,7 +92,6 @@ CONFIG_ARCH_DBDP11212=n CONFIG_BOARD_LOOPSPERMSEC=4275 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0xa0000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_NOINTC=n CONFIG_ARCH_VECNOTIRQ=y CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/sure-pic32mx/usbnsh/defconfig b/nuttx/configs/sure-pic32mx/usbnsh/defconfig index 3a26c5ba2..7571bee37 100644 --- a/nuttx/configs/sure-pic32mx/usbnsh/defconfig +++ b/nuttx/configs/sure-pic32mx/usbnsh/defconfig @@ -54,7 +54,6 @@ # the delay actually is 100 seconds. # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_NOINTC - define if the architecture does not # support an interrupt controller or otherwise cannot support # APIs like up_enable_irq() and up_disable_irq(). @@ -93,7 +92,6 @@ CONFIG_ARCH_DBDP11212=n CONFIG_BOARD_LOOPSPERMSEC=4275 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0xa0000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_NOINTC=n CONFIG_ARCH_VECNOTIRQ=y CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/teensy/README.txt b/nuttx/configs/teensy/README.txt index 14708ab41..979d8e0e7 100644 --- a/nuttx/configs/teensy/README.txt +++ b/nuttx/configs/teensy/README.txt @@ -429,10 +429,6 @@ Teensy++ Configuration Options CONFIG_DRAM_START=0x800100 - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that have LEDs diff --git a/nuttx/configs/teensy/hello/defconfig b/nuttx/configs/teensy/hello/defconfig index 29e8a37c9..dc5e58d65 100644 --- a/nuttx/configs/teensy/hello/defconfig +++ b/nuttx/configs/teensy/hello/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_NOINTC - define if the architecture does not # support an interrupt controller or otherwise cannot support # APIs like up_enable_irq() and up_disable_irq(). @@ -82,7 +81,6 @@ CONFIG_ARCH_BOARD_TEENSY=y CONFIG_BOARD_LOOPSPERMSEC=(8*108) CONFIG_DRAM_SIZE=(8*1024) CONFIG_DRAM_START=0x800100 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_NOINTC=y CONFIG_ARCH_IRQPRIO=n CONFIG_ARCH_INTERRUPTSTACK=n diff --git a/nuttx/configs/teensy/nsh/defconfig b/nuttx/configs/teensy/nsh/defconfig index 49ca06728..68c2c97f5 100755 --- a/nuttx/configs/teensy/nsh/defconfig +++ b/nuttx/configs/teensy/nsh/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_NOINTC - define if the architecture does not # support an interrupt controller or otherwise cannot support # APIs like up_enable_irq() and up_disable_irq(). @@ -82,7 +81,6 @@ CONFIG_ARCH_BOARD_TEENSY=y CONFIG_BOARD_LOOPSPERMSEC=(8*108) CONFIG_DRAM_SIZE=(8*1024) CONFIG_DRAM_START=0x800100 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_NOINTC=y CONFIG_ARCH_IRQPRIO=n CONFIG_ARCH_INTERRUPTSTACK=n diff --git a/nuttx/configs/teensy/usbstorage/defconfig b/nuttx/configs/teensy/usbstorage/defconfig index 2ea9d51ab..570c7f881 100755 --- a/nuttx/configs/teensy/usbstorage/defconfig +++ b/nuttx/configs/teensy/usbstorage/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_NOINTC - define if the architecture does not # support an interrupt controller or otherwise cannot support # APIs like up_enable_irq() and up_disable_irq(). @@ -82,7 +81,6 @@ CONFIG_ARCH_BOARD_TEENSY=y CONFIG_BOARD_LOOPSPERMSEC=(8*108) CONFIG_DRAM_SIZE=(8*1024) CONFIG_DRAM_START=0x800100 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_NOINTC=y CONFIG_ARCH_IRQPRIO=n CONFIG_ARCH_INTERRUPTSTACK=n diff --git a/nuttx/configs/twr-k60n512/README.txt b/nuttx/configs/twr-k60n512/README.txt index 9ad7c1853..5cb273a39 100644 --- a/nuttx/configs/twr-k60n512/README.txt +++ b/nuttx/configs/twr-k60n512/README.txt @@ -474,10 +474,6 @@ TWR-K60N512-specific Configuration Options CONFIG_DRAM_START=0x20000000 - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_ARCH_IRQPRIO - The Kinetis K60 supports interrupt prioritization CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/twr-k60n512/nsh/defconfig b/nuttx/configs/twr-k60n512/nsh/defconfig index cf54ffc06..84359b388 100644 --- a/nuttx/configs/twr-k60n512/nsh/defconfig +++ b/nuttx/configs/twr-k60n512/nsh/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The K60X512VMD100 supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_TWR_K60N512=y CONFIG_BOARD_LOOPSPERMSEC=9535 CONFIG_DRAM_START=0x1fff0000 CONFIG_DRAM_SIZE=0x00020000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/twr-k60n512/ostest/defconfig b/nuttx/configs/twr-k60n512/ostest/defconfig index feba4c0a6..e82877d52 100644 --- a/nuttx/configs/twr-k60n512/ostest/defconfig +++ b/nuttx/configs/twr-k60n512/ostest/defconfig @@ -51,7 +51,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The K60X512VMD100 supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -79,7 +78,6 @@ CONFIG_ARCH_BOARD_TWR_K60N512=y CONFIG_BOARD_LOOPSPERMSEC=9535 CONFIG_DRAM_START=0x1fff0000 CONFIG_DRAM_SIZE=0x00020000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/ubw32/README.txt b/nuttx/configs/ubw32/README.txt index a1652403b..f8afb88e4 100644 --- a/nuttx/configs/ubw32/README.txt +++ b/nuttx/configs/ubw32/README.txt @@ -429,10 +429,6 @@ PIC32MX Configuration Options CONFIG_DRAM_START=0xa0000000 - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_ARCH_IRQPRIO - The PIC32MXx supports interrupt prioritization CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/ubw32/nsh/defconfig b/nuttx/configs/ubw32/nsh/defconfig index 602549328..3bd34a8de 100644 --- a/nuttx/configs/ubw32/nsh/defconfig +++ b/nuttx/configs/ubw32/nsh/defconfig @@ -52,7 +52,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_NOINTC - define if the architecture does not # support an interrupt controller or otherwise cannot support # APIs like up_enable_irq() and up_disable_irq(). @@ -92,7 +91,6 @@ CONFIG_ARCH_BOARD_UBW32=y CONFIG_BOARD_LOOPSPERMSEC=8079 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0xa0000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_NOINTC=n CONFIG_ARCH_VECNOTIRQ=y CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/ubw32/ostest/defconfig b/nuttx/configs/ubw32/ostest/defconfig index 2aef9c3ec..4f30de55d 100644 --- a/nuttx/configs/ubw32/ostest/defconfig +++ b/nuttx/configs/ubw32/ostest/defconfig @@ -52,7 +52,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_NOINTC - define if the architecture does not # support an interrupt controller or otherwise cannot support # APIs like up_enable_irq() and up_disable_irq(). @@ -92,7 +91,6 @@ CONFIG_ARCH_BOARD_UBW32=y CONFIG_BOARD_LOOPSPERMSEC=8079 CONFIG_DRAM_SIZE=(32*1024) CONFIG_DRAM_START=0xa0000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_NOINTC=n CONFIG_ARCH_VECNOTIRQ=y CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/us7032evb1/nsh/defconfig b/nuttx/configs/us7032evb1/nsh/defconfig index 2ab2fe787..75a97f5c7 100644 --- a/nuttx/configs/us7032evb1/nsh/defconfig +++ b/nuttx/configs/us7032evb1/nsh/defconfig @@ -78,7 +78,6 @@ CONFIG_ARCH_LEDS=y CONFIG_ARCH_BUTTONS=y CONFIG_DRAM_SIZE=0x0000e000 CONFIG_DRAM_START=0x0a002000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_INTERRUPTSTACK=0 CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/us7032evb1/ostest/defconfig b/nuttx/configs/us7032evb1/ostest/defconfig index 31bd8b214..f1b899807 100644 --- a/nuttx/configs/us7032evb1/ostest/defconfig +++ b/nuttx/configs/us7032evb1/ostest/defconfig @@ -78,7 +78,6 @@ CONFIG_ARCH_LEDS=y CONFIG_ARCH_BUTTONS=y CONFIG_DRAM_SIZE=0x0000e000 CONFIG_DRAM_START=0x0a002000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_INTERRUPTSTACK=0 CONFIG_ARCH_STACKDUMP=y diff --git a/nuttx/configs/vsn/README.txt b/nuttx/configs/vsn/README.txt index 1cbe35950..9a9209ebe 100644 --- a/nuttx/configs/vsn/README.txt +++ b/nuttx/configs/vsn/README.txt @@ -214,10 +214,6 @@ VSN-specific Configuration Options CONFIG_DRAM_START=0x20000000 - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - CONFIG_ARCH_IRQPRIO - The STM32F103Z supports interrupt prioritization CONFIG_ARCH_IRQPRIO=y diff --git a/nuttx/configs/vsn/nsh/defconfig b/nuttx/configs/vsn/nsh/defconfig index 36d684155..0282d31e7 100755 --- a/nuttx/configs/vsn/nsh/defconfig +++ b/nuttx/configs/vsn/nsh/defconfig @@ -53,7 +53,6 @@ # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM # CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt @@ -82,7 +81,6 @@ CONFIG_ARCH_BOARD_VSN=y CONFIG_BOARD_LOOPSPERMSEC=5483 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y |