diff options
author | px4dev <px4@purgatory.org> | 2013-04-26 16:14:32 -0700 |
---|---|---|
committer | px4dev <px4@purgatory.org> | 2013-04-26 16:14:32 -0700 |
commit | 01e427b17c161d8adaa38d6bdb91aecb434451f2 (patch) | |
tree | e33f4f6b78ef133c91ad92f1a413c2b16f17a5d5 /src/drivers/l3gd20/l3gd20.cpp | |
parent | ce0e4a3afd28b97d5a540e02bef86c52a335f243 (diff) | |
download | px4-firmware-01e427b17c161d8adaa38d6bdb91aecb434451f2.tar.gz px4-firmware-01e427b17c161d8adaa38d6bdb91aecb434451f2.tar.bz2 px4-firmware-01e427b17c161d8adaa38d6bdb91aecb434451f2.zip |
Merge working changes into export-build branch.
Diffstat (limited to 'src/drivers/l3gd20/l3gd20.cpp')
-rw-r--r-- | src/drivers/l3gd20/l3gd20.cpp | 887 |
1 files changed, 887 insertions, 0 deletions
diff --git a/src/drivers/l3gd20/l3gd20.cpp b/src/drivers/l3gd20/l3gd20.cpp new file mode 100644 index 000000000..c7f433dd4 --- /dev/null +++ b/src/drivers/l3gd20/l3gd20.cpp @@ -0,0 +1,887 @@ +/**************************************************************************** + * + * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file Driver for the ST L3GD20 MEMS gyro connected via SPI. + */ + +#include <nuttx/config.h> + +#include <sys/types.h> +#include <stdint.h> +#include <stdbool.h> +#include <stddef.h> +#include <stdlib.h> +#include <semaphore.h> +#include <string.h> +#include <fcntl.h> +#include <poll.h> +#include <errno.h> +#include <stdio.h> +#include <math.h> +#include <unistd.h> + +#include <systemlib/perf_counter.h> +#include <systemlib/err.h> + +#include <nuttx/arch.h> +#include <nuttx/clock.h> + +#include <drivers/drv_hrt.h> +#include <arch/board/board.h> + +#include <drivers/device/spi.h> +#include <drivers/drv_gyro.h> + + +/* oddly, ERROR is not defined for c++ */ +#ifdef ERROR +# undef ERROR +#endif +static const int ERROR = -1; + +/* SPI protocol address bits */ +#define DIR_READ (1<<7) +#define DIR_WRITE (0<<7) +#define ADDR_INCREMENT (1<<6) + +/* register addresses */ +#define ADDR_WHO_AM_I 0x0F +#define WHO_I_AM 0xD4 + +#define ADDR_CTRL_REG1 0x20 +#define REG1_RATE_LP_MASK 0xF0 /* Mask to guard partial register update */ +/* keep lowpass low to avoid noise issues */ +#define RATE_95HZ_LP_25HZ ((0<<7) | (0<<6) | (0<<5) | (1<<4)) +#define RATE_190HZ_LP_25HZ ((0<<7) | (1<<6) | (1<<5) | (1<<4)) +#define RATE_380HZ_LP_30HZ ((1<<7) | (0<<6) | (1<<5) | (1<<4)) +#define RATE_760HZ_LP_30HZ ((1<<7) | (1<<6) | (1<<5) | (1<<4)) + +#define ADDR_CTRL_REG2 0x21 +#define ADDR_CTRL_REG3 0x22 +#define ADDR_CTRL_REG4 0x23 +#define REG4_RANGE_MASK 0x30 /* Mask to guard partial register update */ +#define RANGE_250DPS (0<<4) +#define RANGE_500DPS (1<<4) +#define RANGE_2000DPS (3<<4) + +#define ADDR_CTRL_REG5 0x24 +#define ADDR_REFERENCE 0x25 +#define ADDR_OUT_TEMP 0x26 +#define ADDR_STATUS_REG 0x27 +#define ADDR_OUT_X_L 0x28 +#define ADDR_OUT_X_H 0x29 +#define ADDR_OUT_Y_L 0x2A +#define ADDR_OUT_Y_H 0x2B +#define ADDR_OUT_Z_L 0x2C +#define ADDR_OUT_Z_H 0x2D +#define ADDR_FIFO_CTRL_REG 0x2E +#define ADDR_FIFO_SRC_REG 0x2F +#define ADDR_INT1_CFG 0x30 +#define ADDR_INT1_SRC 0x31 +#define ADDR_INT1_TSH_XH 0x32 +#define ADDR_INT1_TSH_XL 0x33 +#define ADDR_INT1_TSH_YH 0x34 +#define ADDR_INT1_TSH_YL 0x35 +#define ADDR_INT1_TSH_ZH 0x36 +#define ADDR_INT1_TSH_ZL 0x37 +#define ADDR_INT1_DURATION 0x38 + + +/* Internal configuration values */ +#define REG1_POWER_NORMAL (1<<3) +#define REG1_Z_ENABLE (1<<2) +#define REG1_Y_ENABLE (1<<1) +#define REG1_X_ENABLE (1<<0) + +#define REG4_BDU (1<<7) +#define REG4_BLE (1<<6) +//#define REG4_SPI_3WIRE (1<<0) + +#define REG5_FIFO_ENABLE (1<<6) +#define REG5_REBOOT_MEMORY (1<<7) + +#define STATUS_ZYXOR (1<<7) +#define STATUS_ZOR (1<<6) +#define STATUS_YOR (1<<5) +#define STATUS_XOR (1<<4) +#define STATUS_ZYXDA (1<<3) +#define STATUS_ZDA (1<<2) +#define STATUS_YDA (1<<1) +#define STATUS_XDA (1<<0) + +#define FIFO_CTRL_BYPASS_MODE (0<<5) +#define FIFO_CTRL_FIFO_MODE (1<<5) +#define FIFO_CTRL_STREAM_MODE (1<<6) +#define FIFO_CTRL_STREAM_TO_FIFO_MODE (3<<5) +#define FIFO_CTRL_BYPASS_TO_STREAM_MODE (1<<7) + +extern "C" { __EXPORT int l3gd20_main(int argc, char *argv[]); } + +class L3GD20 : public device::SPI +{ +public: + L3GD20(int bus, const char* path, spi_dev_e device); + virtual ~L3GD20(); + + virtual int init(); + + virtual ssize_t read(struct file *filp, char *buffer, size_t buflen); + virtual int ioctl(struct file *filp, int cmd, unsigned long arg); + + /** + * Diagnostics - print some basic information about the driver. + */ + void print_info(); + +protected: + virtual int probe(); + +private: + + struct hrt_call _call; + unsigned _call_interval; + + unsigned _num_reports; + volatile unsigned _next_report; + volatile unsigned _oldest_report; + struct gyro_report *_reports; + + struct gyro_scale _gyro_scale; + float _gyro_range_scale; + float _gyro_range_rad_s; + orb_advert_t _gyro_topic; + + unsigned _current_rate; + unsigned _current_range; + + perf_counter_t _sample_perf; + + /** + * Start automatic measurement. + */ + void start(); + + /** + * Stop automatic measurement. + */ + void stop(); + + /** + * Static trampoline from the hrt_call context; because we don't have a + * generic hrt wrapper yet. + * + * Called by the HRT in interrupt context at the specified rate if + * automatic polling is enabled. + * + * @param arg Instance pointer for the driver that is polling. + */ + static void measure_trampoline(void *arg); + + /** + * Fetch measurements from the sensor and update the report ring. + */ + void measure(); + + /** + * Read a register from the L3GD20 + * + * @param The register to read. + * @return The value that was read. + */ + uint8_t read_reg(unsigned reg); + + /** + * Write a register in the L3GD20 + * + * @param reg The register to write. + * @param value The new value to write. + */ + void write_reg(unsigned reg, uint8_t value); + + /** + * Modify a register in the L3GD20 + * + * Bits are cleared before bits are set. + * + * @param reg The register to modify. + * @param clearbits Bits in the register to clear. + * @param setbits Bits in the register to set. + */ + void modify_reg(unsigned reg, uint8_t clearbits, uint8_t setbits); + + /** + * Set the L3GD20 measurement range. + * + * @param max_dps The measurement range is set to permit reading at least + * this rate in degrees per second. + * Zero selects the maximum supported range. + * @return OK if the value can be supported, -ERANGE otherwise. + */ + int set_range(unsigned max_dps); + + /** + * Set the L3GD20 internal sampling frequency. + * + * @param frequency The internal sampling frequency is set to not less than + * this value. + * Zero selects the maximum rate supported. + * @return OK if the value can be supported. + */ + int set_samplerate(unsigned frequency); +}; + +/* helper macro for handling report buffer indices */ +#define INCREMENT(_x, _lim) do { _x++; if (_x >= _lim) _x = 0; } while(0) + + +L3GD20::L3GD20(int bus, const char* path, spi_dev_e device) : + SPI("L3GD20", path, bus, device, SPIDEV_MODE3, 8000000), + _call_interval(0), + _num_reports(0), + _next_report(0), + _oldest_report(0), + _reports(nullptr), + _gyro_range_scale(0.0f), + _gyro_range_rad_s(0.0f), + _gyro_topic(-1), + _current_rate(0), + _current_range(0), + _sample_perf(perf_alloc(PC_ELAPSED, "l3gd20_read")) +{ + // enable debug() calls + _debug_enabled = true; + + // default scale factors + _gyro_scale.x_offset = 0; + _gyro_scale.x_scale = 1.0f; + _gyro_scale.y_offset = 0; + _gyro_scale.y_scale = 1.0f; + _gyro_scale.z_offset = 0; + _gyro_scale.z_scale = 1.0f; +} + +L3GD20::~L3GD20() +{ + /* make sure we are truly inactive */ + stop(); + + /* free any existing reports */ + if (_reports != nullptr) + delete[] _reports; + + /* delete the perf counter */ + perf_free(_sample_perf); +} + +int +L3GD20::init() +{ + int ret = ERROR; + + /* do SPI init (and probe) first */ + if (SPI::init() != OK) + goto out; + + /* allocate basic report buffers */ + _num_reports = 2; + _oldest_report = _next_report = 0; + _reports = new struct gyro_report[_num_reports]; + + if (_reports == nullptr) + goto out; + + /* advertise sensor topic */ + memset(&_reports[0], 0, sizeof(_reports[0])); + _gyro_topic = orb_advertise(ORB_ID(sensor_gyro), &_reports[0]); + + /* set default configuration */ + write_reg(ADDR_CTRL_REG1, REG1_POWER_NORMAL | REG1_Z_ENABLE | REG1_Y_ENABLE | REG1_X_ENABLE); + write_reg(ADDR_CTRL_REG2, 0); /* disable high-pass filters */ + write_reg(ADDR_CTRL_REG3, 0); /* no interrupts - we don't use them */ + write_reg(ADDR_CTRL_REG4, REG4_BDU); + write_reg(ADDR_CTRL_REG5, 0); + + write_reg(ADDR_CTRL_REG5, REG5_FIFO_ENABLE); /* disable wake-on-interrupt */ + write_reg(ADDR_FIFO_CTRL_REG, FIFO_CTRL_STREAM_MODE); /* Enable FIFO, old data is overwritten */ + + set_range(500); /* default to 500dps */ + set_samplerate(0); /* max sample rate */ + + ret = OK; +out: + return ret; +} + +int +L3GD20::probe() +{ + /* read dummy value to void to clear SPI statemachine on sensor */ + (void)read_reg(ADDR_WHO_AM_I); + + /* verify that the device is attached and functioning */ + if (read_reg(ADDR_WHO_AM_I) == WHO_I_AM) + return OK; + + return -EIO; +} + +ssize_t +L3GD20::read(struct file *filp, char *buffer, size_t buflen) +{ + unsigned count = buflen / sizeof(struct gyro_report); + int ret = 0; + + /* buffer must be large enough */ + if (count < 1) + return -ENOSPC; + + /* if automatic measurement is enabled */ + if (_call_interval > 0) { + + /* + * While there is space in the caller's buffer, and reports, copy them. + * Note that we may be pre-empted by the measurement code while we are doing this; + * we are careful to avoid racing with it. + */ + while (count--) { + if (_oldest_report != _next_report) { + memcpy(buffer, _reports + _oldest_report, sizeof(*_reports)); + ret += sizeof(_reports[0]); + INCREMENT(_oldest_report, _num_reports); + } + } + + /* if there was no data, warn the caller */ + return ret ? ret : -EAGAIN; + } + + /* manual measurement */ + _oldest_report = _next_report = 0; + measure(); + + /* measurement will have generated a report, copy it out */ + memcpy(buffer, _reports, sizeof(*_reports)); + ret = sizeof(*_reports); + + return ret; +} + +int +L3GD20::ioctl(struct file *filp, int cmd, unsigned long arg) +{ + switch (cmd) { + + case SENSORIOCSPOLLRATE: { + switch (arg) { + + /* switching to manual polling */ + case SENSOR_POLLRATE_MANUAL: + stop(); + _call_interval = 0; + return OK; + + /* external signalling not supported */ + case SENSOR_POLLRATE_EXTERNAL: + + /* zero would be bad */ + case 0: + return -EINVAL; + + /* set default/max polling rate */ + case SENSOR_POLLRATE_MAX: + case SENSOR_POLLRATE_DEFAULT: + /* With internal low pass filters enabled, 250 Hz is sufficient */ + return ioctl(filp, SENSORIOCSPOLLRATE, 250); + + /* adjust to a legal polling interval in Hz */ + default: { + /* do we need to start internal polling? */ + bool want_start = (_call_interval == 0); + + /* convert hz to hrt interval via microseconds */ + unsigned ticks = 1000000 / arg; + + /* check against maximum sane rate */ + if (ticks < 1000) + return -EINVAL; + + /* update interval for next measurement */ + /* XXX this is a bit shady, but no other way to adjust... */ + _call.period = _call_interval = ticks; + + /* if we need to start the poll state machine, do it */ + if (want_start) + start(); + + return OK; + } + } + } + + case SENSORIOCGPOLLRATE: + if (_call_interval == 0) + return SENSOR_POLLRATE_MANUAL; + + return 1000000 / _call_interval; + + case SENSORIOCSQUEUEDEPTH: { + /* account for sentinel in the ring */ + arg++; + + /* lower bound is mandatory, upper bound is a sanity check */ + if ((arg < 2) || (arg > 100)) + return -EINVAL; + + /* allocate new buffer */ + struct gyro_report *buf = new struct gyro_report[arg]; + + if (nullptr == buf) + return -ENOMEM; + + /* reset the measurement state machine with the new buffer, free the old */ + stop(); + delete[] _reports; + _num_reports = arg; + _reports = buf; + start(); + + return OK; + } + + case SENSORIOCGQUEUEDEPTH: + return _num_reports - 1; + + case SENSORIOCRESET: + /* XXX implement */ + return -EINVAL; + + case GYROIOCSSAMPLERATE: + return set_samplerate(arg); + + case GYROIOCGSAMPLERATE: + return _current_rate; + + case GYROIOCSLOWPASS: + case GYROIOCGLOWPASS: + /* XXX not implemented due to wacky interaction with samplerate */ + return -EINVAL; + + case GYROIOCSSCALE: + /* copy scale in */ + memcpy(&_gyro_scale, (struct gyro_scale *) arg, sizeof(_gyro_scale)); + return OK; + + case GYROIOCGSCALE: + /* copy scale out */ + memcpy((struct gyro_scale *) arg, &_gyro_scale, sizeof(_gyro_scale)); + return OK; + + case GYROIOCSRANGE: + return set_range(arg); + + case GYROIOCGRANGE: + return _current_range; + + default: + /* give it to the superclass */ + return SPI::ioctl(filp, cmd, arg); + } +} + +uint8_t +L3GD20::read_reg(unsigned reg) +{ + uint8_t cmd[2]; + + cmd[0] = reg | DIR_READ; + + transfer(cmd, cmd, sizeof(cmd)); + + return cmd[1]; +} + +void +L3GD20::write_reg(unsigned reg, uint8_t value) +{ + uint8_t cmd[2]; + + cmd[0] = reg | DIR_WRITE; + cmd[1] = value; + + transfer(cmd, nullptr, sizeof(cmd)); +} + +void +L3GD20::modify_reg(unsigned reg, uint8_t clearbits, uint8_t setbits) +{ + uint8_t val; + + val = read_reg(reg); + val &= ~clearbits; + val |= setbits; + write_reg(reg, val); +} + +int +L3GD20::set_range(unsigned max_dps) +{ + uint8_t bits = REG4_BDU; + + if (max_dps == 0) + max_dps = 2000; + + if (max_dps <= 250) { + _current_range = 250; + bits |= RANGE_250DPS; + + } else if (max_dps <= 500) { + _current_range = 500; + bits |= RANGE_500DPS; + + } else if (max_dps <= 2000) { + _current_range = 2000; + bits |= RANGE_2000DPS; + + } else { + return -EINVAL; + } + + _gyro_range_rad_s = _current_range / 180.0f * M_PI_F; + _gyro_range_scale = _gyro_range_rad_s / 32768.0f; + write_reg(ADDR_CTRL_REG4, bits); + + return OK; +} + +int +L3GD20::set_samplerate(unsigned frequency) +{ + uint8_t bits = REG1_POWER_NORMAL | REG1_Z_ENABLE | REG1_Y_ENABLE | REG1_X_ENABLE; + + if (frequency == 0) + frequency = 760; + + if (frequency <= 95) { + _current_rate = 95; + bits |= RATE_95HZ_LP_25HZ; + + } else if (frequency <= 190) { + _current_rate = 190; + bits |= RATE_190HZ_LP_25HZ; + + } else if (frequency <= 380) { + _current_rate = 380; + bits |= RATE_380HZ_LP_30HZ; + + } else if (frequency <= 760) { + _current_rate = 760; + bits |= RATE_760HZ_LP_30HZ; + + } else { + return -EINVAL; + } + + write_reg(ADDR_CTRL_REG1, bits); + + return OK; +} + +void +L3GD20::start() +{ + /* make sure we are stopped first */ + stop(); + + /* reset the report ring */ + _oldest_report = _next_report = 0; + + /* start polling at the specified rate */ + hrt_call_every(&_call, 1000, _call_interval, (hrt_callout)&L3GD20::measure_trampoline, this); +} + +void +L3GD20::stop() +{ + hrt_cancel(&_call); +} + +void +L3GD20::measure_trampoline(void *arg) +{ + L3GD20 *dev = (L3GD20 *)arg; + + /* make another measurement */ + dev->measure(); +} + +void +L3GD20::measure() +{ + /* status register and data as read back from the device */ +#pragma pack(push, 1) + struct { + uint8_t cmd; + uint8_t temp; + uint8_t status; + int16_t x; + int16_t y; + int16_t z; + } raw_report; +#pragma pack(pop) + + gyro_report *report = &_reports[_next_report]; + + /* start the performance counter */ + perf_begin(_sample_perf); + + /* fetch data from the sensor */ + raw_report.cmd = ADDR_OUT_TEMP | DIR_READ | ADDR_INCREMENT; + transfer((uint8_t *)&raw_report, (uint8_t *)&raw_report, sizeof(raw_report)); + + /* + * 1) Scale raw value to SI units using scaling from datasheet. + * 2) Subtract static offset (in SI units) + * 3) Scale the statically calibrated values with a linear + * dynamically obtained factor + * + * Note: the static sensor offset is the number the sensor outputs + * at a nominally 'zero' input. Therefore the offset has to + * be subtracted. + * + * Example: A gyro outputs a value of 74 at zero angular rate + * the offset is 74 from the origin and subtracting + * 74 from all measurements centers them around zero. + */ + report->timestamp = hrt_absolute_time(); + + /* swap x and y and negate y */ + report->x_raw = raw_report.y; + report->y_raw = ((raw_report.x == -32768) ? 32767 : -raw_report.x); + report->z_raw = raw_report.z; + + report->x = ((report->x_raw * _gyro_range_scale) - _gyro_scale.x_offset) * _gyro_scale.x_scale; + report->y = ((report->y_raw * _gyro_range_scale) - _gyro_scale.y_offset) * _gyro_scale.y_scale; + report->z = ((report->z_raw * _gyro_range_scale) - _gyro_scale.z_offset) * _gyro_scale.z_scale; + report->scaling = _gyro_range_scale; + report->range_rad_s = _gyro_range_rad_s; + + /* post a report to the ring - note, not locked */ + INCREMENT(_next_report, _num_reports); + + /* if we are running up against the oldest report, fix it */ + if (_next_report == _oldest_report) + INCREMENT(_oldest_report, _num_reports); + + /* notify anyone waiting for data */ + poll_notify(POLLIN); + + /* publish for subscribers */ + orb_publish(ORB_ID(sensor_gyro), _gyro_topic, report); + + /* stop the perf counter */ + perf_end(_sample_perf); +} + +void +L3GD20::print_info() +{ + perf_print_counter(_sample_perf); + printf("report queue: %u (%u/%u @ %p)\n", + _num_reports, _oldest_report, _next_report, _reports); +} + +/** + * Local functions in support of the shell command. + */ +namespace l3gd20 +{ + +L3GD20 *g_dev; + +void start(); +void test(); +void reset(); +void info(); + +/** + * Start the driver. + */ +void +start() +{ + int fd; + + if (g_dev != nullptr) + errx(1, "already started"); + + /* create the driver */ + g_dev = new L3GD20(1 /* XXX magic number */, GYRO_DEVICE_PATH, (spi_dev_e)PX4_SPIDEV_GYRO); + + if (g_dev == nullptr) + goto fail; + + if (OK != g_dev->init()) + goto fail; + + /* set the poll rate to default, starts automatic data collection */ + fd = open(GYRO_DEVICE_PATH, O_RDONLY); + + if (fd < 0) + goto fail; + + if (ioctl(fd, SENSORIOCSPOLLRATE, SENSOR_POLLRATE_DEFAULT) < 0) + goto fail; + + exit(0); +fail: + + if (g_dev != nullptr) { + delete g_dev; + g_dev = nullptr; + } + + errx(1, "driver start failed"); +} + +/** + * Perform some basic functional tests on the driver; + * make sure we can collect data from the sensor in polled + * and automatic modes. + */ +void +test() +{ + int fd_gyro = -1; + struct gyro_report g_report; + ssize_t sz; + + /* get the driver */ + fd_gyro = open(GYRO_DEVICE_PATH, O_RDONLY); + + if (fd_gyro < 0) + err(1, "%s open failed", GYRO_DEVICE_PATH); + + /* reset to manual polling */ + if (ioctl(fd_gyro, SENSORIOCSPOLLRATE, SENSOR_POLLRATE_MANUAL) < 0) + err(1, "reset to manual polling"); + + /* do a simple demand read */ + sz = read(fd_gyro, &g_report, sizeof(g_report)); + + if (sz != sizeof(g_report)) + err(1, "immediate gyro read failed"); + + warnx("gyro x: \t% 9.5f\trad/s", (double)g_report.x); + warnx("gyro y: \t% 9.5f\trad/s", (double)g_report.y); + warnx("gyro z: \t% 9.5f\trad/s", (double)g_report.z); + warnx("gyro x: \t%d\traw", (int)g_report.x_raw); + warnx("gyro y: \t%d\traw", (int)g_report.y_raw); + warnx("gyro z: \t%d\traw", (int)g_report.z_raw); + warnx("gyro range: %8.4f rad/s (%d deg/s)", (double)g_report.range_rad_s, + (int)((g_report.range_rad_s / M_PI_F) * 180.0f + 0.5f)); + + /* XXX add poll-rate tests here too */ + + reset(); + errx(0, "PASS"); +} + +/** + * Reset the driver. + */ +void +reset() +{ + int fd = open(GYRO_DEVICE_PATH, O_RDONLY); + + if (fd < 0) + err(1, "failed "); + + if (ioctl(fd, SENSORIOCRESET, 0) < 0) + err(1, "driver reset failed"); + + if (ioctl(fd, SENSORIOCSPOLLRATE, SENSOR_POLLRATE_DEFAULT) < 0) + err(1, "driver poll restart failed"); + + exit(0); +} + +/** + * Print a little info about the driver. + */ +void +info() +{ + if (g_dev == nullptr) + errx(1, "driver not running\n"); + + printf("state @ %p\n", g_dev); + g_dev->print_info(); + + exit(0); +} + + +} // namespace + +int +l3gd20_main(int argc, char *argv[]) +{ + /* + * Start/load the driver. + + */ + if (!strcmp(argv[1], "start")) + l3gd20::start(); + + /* + * Test the driver/device. + */ + if (!strcmp(argv[1], "test")) + l3gd20::test(); + + /* + * Reset the driver. + */ + if (!strcmp(argv[1], "reset")) + l3gd20::reset(); + + /* + * Print driver information. + */ + if (!strcmp(argv[1], "info")) + l3gd20::info(); + + errx(1, "unrecognized command, try 'start', 'test', 'reset' or 'info'"); +} |