diff options
author | Julian Oes <julian@oes.ch> | 2013-05-17 11:24:02 +0200 |
---|---|---|
committer | Julian Oes <julian@oes.ch> | 2013-05-17 11:24:02 +0200 |
commit | f5c157e74df12a0cb36b7d27cdad9828d96cc534 (patch) | |
tree | 3f758990921a7b52df8afe5131a8298b1141b6f4 /src/drivers/md25/md25.cpp | |
parent | 80e8eeab2931e79e31adb17c93f5794e666c5763 (diff) | |
parent | fa816d0fd65da461fd5bf8803cf00caebaf23c5c (diff) | |
download | px4-firmware-f5c157e74df12a0cb36b7d27cdad9828d96cc534.tar.gz px4-firmware-f5c157e74df12a0cb36b7d27cdad9828d96cc534.tar.bz2 px4-firmware-f5c157e74df12a0cb36b7d27cdad9828d96cc534.zip |
Merge remote-tracking branch 'upstream/master' into new_state_machine
Conflicts:
src/drivers/px4io/px4io.cpp
src/modules/commander/commander.c
src/modules/commander/state_machine_helper.c
Diffstat (limited to 'src/drivers/md25/md25.cpp')
-rw-r--r-- | src/drivers/md25/md25.cpp | 553 |
1 files changed, 553 insertions, 0 deletions
diff --git a/src/drivers/md25/md25.cpp b/src/drivers/md25/md25.cpp new file mode 100644 index 000000000..71932ad65 --- /dev/null +++ b/src/drivers/md25/md25.cpp @@ -0,0 +1,553 @@ +/**************************************************************************** + * + * Copyright (c) 2013 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file md25.cpp + * + * Driver for MD25 I2C Motor Driver + * + * references: + * http://www.robot-electronics.co.uk/htm/md25tech.htm + * http://www.robot-electronics.co.uk/files/rpi_md25.c + * + */ + +#include "md25.hpp" +#include <poll.h> +#include <stdio.h> + +#include <systemlib/err.h> +#include <arch/board/board.h> + +// registers +enum { + // RW: read/write + // R: read + REG_SPEED1_RW = 0, + REG_SPEED2_RW, + REG_ENC1A_R, + REG_ENC1B_R, + REG_ENC1C_R, + REG_ENC1D_R, + REG_ENC2A_R, + REG_ENC2B_R, + REG_ENC2C_R, + REG_ENC2D_R, + REG_BATTERY_VOLTS_R, + REG_MOTOR1_CURRENT_R, + REG_MOTOR2_CURRENT_R, + REG_SW_VERSION_R, + REG_ACCEL_RATE_RW, + REG_MODE_RW, + REG_COMMAND_RW, +}; + +MD25::MD25(const char *deviceName, int bus, + uint16_t address, uint32_t speed) : + I2C("MD25", deviceName, bus, address, speed), + _controlPoll(), + _actuators(NULL, ORB_ID(actuator_controls_0), 20), + _version(0), + _motor1Speed(0), + _motor2Speed(0), + _revolutions1(0), + _revolutions2(0), + _batteryVoltage(0), + _motor1Current(0), + _motor2Current(0), + _motorAccel(0), + _mode(MODE_UNSIGNED_SPEED), + _command(CMD_RESET_ENCODERS) +{ + // setup control polling + _controlPoll.fd = _actuators.getHandle(); + _controlPoll.events = POLLIN; + + // if initialization fails raise an error, unless + // probing + int ret = I2C::init(); + + if (ret != OK) { + warnc(ret, "I2C::init failed for bus: %d address: %d\n", bus, address); + } + + // setup default settings, reset encoders + setMotor1Speed(0); + setMotor2Speed(0); + resetEncoders(); + _setMode(MD25::MODE_UNSIGNED_SPEED); + setSpeedRegulation(true); + setTimeout(true); +} + +MD25::~MD25() +{ +} + +int MD25::readData() +{ + uint8_t sendBuf[1]; + sendBuf[0] = REG_SPEED1_RW; + uint8_t recvBuf[17]; + int ret = transfer(sendBuf, sizeof(sendBuf), + recvBuf, sizeof(recvBuf)); + + if (ret == OK) { + _version = recvBuf[REG_SW_VERSION_R]; + _motor1Speed = _uint8ToNorm(recvBuf[REG_SPEED1_RW]); + _motor2Speed = _uint8ToNorm(recvBuf[REG_SPEED2_RW]); + _revolutions1 = -int32_t((recvBuf[REG_ENC1A_R] << 24) + + (recvBuf[REG_ENC1B_R] << 16) + + (recvBuf[REG_ENC1C_R] << 8) + + recvBuf[REG_ENC1D_R]) / 360.0; + _revolutions2 = -int32_t((recvBuf[REG_ENC2A_R] << 24) + + (recvBuf[REG_ENC2B_R] << 16) + + (recvBuf[REG_ENC2C_R] << 8) + + recvBuf[REG_ENC2D_R]) / 360.0; + _batteryVoltage = recvBuf[REG_BATTERY_VOLTS_R] / 10.0; + _motor1Current = recvBuf[REG_MOTOR1_CURRENT_R] / 10.0; + _motor2Current = recvBuf[REG_MOTOR2_CURRENT_R] / 10.0; + _motorAccel = recvBuf[REG_ACCEL_RATE_RW]; + _mode = e_mode(recvBuf[REG_MODE_RW]); + _command = e_cmd(recvBuf[REG_COMMAND_RW]); + } + + return ret; +} + +void MD25::status(char *string, size_t n) +{ + snprintf(string, n, + "version:\t%10d\n" \ + "motor 1 speed:\t%10.2f\n" \ + "motor 2 speed:\t%10.2f\n" \ + "revolutions 1:\t%10.2f\n" \ + "revolutions 2:\t%10.2f\n" \ + "battery volts :\t%10.2f\n" \ + "motor 1 current :\t%10.2f\n" \ + "motor 2 current :\t%10.2f\n" \ + "motor accel :\t%10d\n" \ + "mode :\t%10d\n" \ + "command :\t%10d\n", + getVersion(), + double(getMotor1Speed()), + double(getMotor2Speed()), + double(getRevolutions1()), + double(getRevolutions2()), + double(getBatteryVolts()), + double(getMotor1Current()), + double(getMotor2Current()), + getMotorAccel(), + getMode(), + getCommand()); +} + +uint8_t MD25::getVersion() +{ + return _version; +} + +float MD25::getMotor1Speed() +{ + return _motor1Speed; +} + +float MD25::getMotor2Speed() +{ + return _motor2Speed; +} + +float MD25::getRevolutions1() +{ + return _revolutions1; +} + +float MD25::getRevolutions2() +{ + return _revolutions2; +} + +float MD25::getBatteryVolts() +{ + return _batteryVoltage; +} + +float MD25::getMotor1Current() +{ + return _motor1Current; +} +float MD25::getMotor2Current() +{ + return _motor2Current; +} + +uint8_t MD25::getMotorAccel() +{ + return _motorAccel; +} + +MD25::e_mode MD25::getMode() +{ + return _mode; +} + +MD25::e_cmd MD25::getCommand() +{ + return _command; +} + +int MD25::resetEncoders() +{ + return _writeUint8(REG_COMMAND_RW, + CMD_RESET_ENCODERS); +} + +int MD25::_setMode(e_mode mode) +{ + return _writeUint8(REG_MODE_RW, + mode); +} + +int MD25::setSpeedRegulation(bool enable) +{ + if (enable) { + return _writeUint8(REG_COMMAND_RW, + CMD_ENABLE_SPEED_REGULATION); + + } else { + return _writeUint8(REG_COMMAND_RW, + CMD_DISABLE_SPEED_REGULATION); + } +} + +int MD25::setTimeout(bool enable) +{ + if (enable) { + return _writeUint8(REG_COMMAND_RW, + CMD_ENABLE_TIMEOUT); + + } else { + return _writeUint8(REG_COMMAND_RW, + CMD_DISABLE_TIMEOUT); + } +} + +int MD25::setDeviceAddress(uint8_t address) +{ + uint8_t sendBuf[1]; + sendBuf[0] = CMD_CHANGE_I2C_SEQ_0; + int ret = OK; + ret = transfer(sendBuf, sizeof(sendBuf), + nullptr, 0); + + if (ret != OK) { + warnc(ret, "MD25::setDeviceAddress"); + return ret; + } + + usleep(5000); + sendBuf[0] = CMD_CHANGE_I2C_SEQ_1; + ret = transfer(sendBuf, sizeof(sendBuf), + nullptr, 0); + + if (ret != OK) { + warnc(ret, "MD25::setDeviceAddress"); + return ret; + } + + usleep(5000); + sendBuf[0] = CMD_CHANGE_I2C_SEQ_2; + ret = transfer(sendBuf, sizeof(sendBuf), + nullptr, 0); + + if (ret != OK) { + warnc(ret, "MD25::setDeviceAddress"); + return ret; + } + + return OK; +} + +int MD25::setMotor1Speed(float value) +{ + return _writeUint8(REG_SPEED1_RW, + _normToUint8(value)); +} + +int MD25::setMotor2Speed(float value) +{ + return _writeUint8(REG_SPEED2_RW, + _normToUint8(value)); +} + +void MD25::update() +{ + // wait for an actuator publication, + // check for exit condition every second + // note "::poll" is required to distinguish global + // poll from member function for driver + if (::poll(&_controlPoll, 1, 1000) < 0) return; // poll error + + // if new data, send to motors + if (_actuators.updated()) { + _actuators.update(); + setMotor1Speed(_actuators.control[CH_SPEED_LEFT]); + setMotor2Speed(_actuators.control[CH_SPEED_RIGHT]); + } +} + +int MD25::probe() +{ + uint8_t goodAddress = 0; + bool found = false; + int ret = OK; + + // try initial address first, if good, then done + if (readData() == OK) return ret; + + // try all other addresses + uint8_t testAddress = 0; + + //printf("searching for MD25 address\n"); + while (true) { + set_address(testAddress); + ret = readData(); + + if (ret == OK && !found) { + //printf("device found at address: 0x%X\n", testAddress); + if (!found) { + found = true; + goodAddress = testAddress; + } + } + + if (testAddress > 254) { + break; + } + + testAddress++; + } + + if (found) { + set_address(goodAddress); + return OK; + + } else { + set_address(0); + return ret; + } +} + +int MD25::search() +{ + uint8_t goodAddress = 0; + bool found = false; + int ret = OK; + // try all other addresses + uint8_t testAddress = 0; + + //printf("searching for MD25 address\n"); + while (true) { + set_address(testAddress); + ret = readData(); + + if (ret == OK && !found) { + printf("device found at address: 0x%X\n", testAddress); + + if (!found) { + found = true; + goodAddress = testAddress; + } + } + + if (testAddress > 254) { + break; + } + + testAddress++; + } + + if (found) { + set_address(goodAddress); + return OK; + + } else { + set_address(0); + return ret; + } +} + +int MD25::_writeUint8(uint8_t reg, uint8_t value) +{ + uint8_t sendBuf[2]; + sendBuf[0] = reg; + sendBuf[1] = value; + return transfer(sendBuf, sizeof(sendBuf), + nullptr, 0); +} + +int MD25::_writeInt8(uint8_t reg, int8_t value) +{ + uint8_t sendBuf[2]; + sendBuf[0] = reg; + sendBuf[1] = value; + return transfer(sendBuf, sizeof(sendBuf), + nullptr, 0); +} + +float MD25::_uint8ToNorm(uint8_t value) +{ + // TODO, should go from 0 to 255 + // possibly should handle this differently + return (value - 128) / 127.0; +} + +uint8_t MD25::_normToUint8(float value) +{ + if (value > 1) value = 1; + + if (value < -1) value = -1; + + // TODO, should go from 0 to 255 + // possibly should handle this differently + return 127 * value + 128; +} + +int md25Test(const char *deviceName, uint8_t bus, uint8_t address) +{ + printf("md25 test: starting\n"); + + // setup + MD25 md25("/dev/md25", bus, address); + + // print status + char buf[200]; + md25.status(buf, sizeof(buf)); + printf("%s\n", buf); + + // setup for test + md25.setSpeedRegulation(true); + md25.setTimeout(true); + float dt = 0.1; + float speed = 0.2; + float t = 0; + + // motor 1 test + printf("md25 test: spinning motor 1 forward for 1 rev at 0.1 speed\n"); + t = 0; + + while (true) { + t += dt; + md25.setMotor1Speed(speed); + md25.readData(); + usleep(1000000 * dt); + + if (md25.getRevolutions1() > 1) { + printf("finished 1 revolution fwd\n"); + break; + } + + if (t > 2.0f) break; + } + + md25.setMotor1Speed(0); + printf("revolution of wheel 1: %8.4f\n", double(md25.getRevolutions1())); + md25.resetEncoders(); + + t = 0; + + while (true) { + t += dt; + md25.setMotor1Speed(-speed); + md25.readData(); + usleep(1000000 * dt); + + if (md25.getRevolutions1() < -1) { + printf("finished 1 revolution rev\n"); + break; + } + + if (t > 2.0f) break; + } + + md25.setMotor1Speed(0); + printf("revolution of wheel 1: %8.4f\n", double(md25.getRevolutions1())); + md25.resetEncoders(); + + // motor 2 test + printf("md25 test: spinning motor 2 forward for 1 rev at 0.1 speed\n"); + t = 0; + + while (true) { + t += dt; + md25.setMotor2Speed(speed); + md25.readData(); + usleep(1000000 * dt); + + if (md25.getRevolutions2() > 1) { + printf("finished 1 revolution fwd\n"); + break; + } + + if (t > 2.0f) break; + } + + md25.setMotor2Speed(0); + printf("revolution of wheel 2: %8.4f\n", double(md25.getRevolutions2())); + md25.resetEncoders(); + + t = 0; + + while (true) { + t += dt; + md25.setMotor2Speed(-speed); + md25.readData(); + usleep(1000000 * dt); + + if (md25.getRevolutions2() < -1) { + printf("finished 1 revolution rev\n"); + break; + } + + if (t > 2.0f) break; + } + + md25.setMotor2Speed(0); + printf("revolution of wheel 2: %8.4f\n", double(md25.getRevolutions2())); + md25.resetEncoders(); + + printf("Test complete\n"); + return 0; +} + +// vi:noet:smarttab:autoindent:ts=4:sw=4:tw=78 |