Merged with master

1 files changed, 264 insertions, 0 deletions

diff --git a/src/drivers/md25/md25_main.cpp b/src/drivers/md25/md25_main.cpp
new file mode 100644
index 000000000..85aaab7f6
--- /dev/null
+++ b/src/drivers/md25/md25_main.cpp
@@ -0,0 +1,264 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2013 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+
+
+/**
+ * @ file md25.cpp
+ *
+ * Driver for MD25 I2C Motor Driver
+ *
+ * references:
+ * http://www.robot-electronics.co.uk/htm/md25tech.htm
+ * http://www.robot-electronics.co.uk/files/rpi_md25.c
+ *
+ */
+
+#include <nuttx/config.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <math.h>
+
+#include <systemlib/systemlib.h>
+#include <systemlib/param/param.h>
+
+#include <arch/board/board.h>
+#include "MD25.hpp"
+
+static bool thread_should_exit = false;     /**< Deamon exit flag */
+static bool thread_running = false;     /**< Deamon status flag */
+static int deamon_task;             /**< Handle of deamon task / thread */
+
+/**
+ * Deamon management function.
+ */
+extern "C" __EXPORT int md25_main(int argc, char *argv[]);
+
+/**
+ * Mainloop of deamon.
+ */
+int md25_thread_main(int argc, char *argv[]);
+
+/**
+ * Print the correct usage.
+ */
+static void usage(const char *reason);
+
+static void
+usage(const char *reason)
+{
+	if (reason)
+		fprintf(stderr, "%s\n", reason);
+
+	fprintf(stderr, "usage: md25 {start|stop|status|search|test|change_address}\n\n");
+	exit(1);
+}
+
+/**
+ * The deamon app only briefly exists to start
+ * the background job. The stack size assigned in the
+ * Makefile does only apply to this management task.
+ *
+ * The actual stack size should be set in the call
+ * to task_create().
+ */
+int md25_main(int argc, char *argv[])
+{
+
+	if (argc < 1)
+		usage("missing command");
+
+	if (!strcmp(argv[1], "start")) {
+
+		if (thread_running) {
+			printf("md25 already running\n");
+			/* this is not an error */
+			exit(0);
+		}
+
+		thread_should_exit = false;
+		deamon_task = task_spawn("md25",
+					 SCHED_DEFAULT,
+					 SCHED_PRIORITY_MAX - 10,
+					 2048,
+					 md25_thread_main,
+					 (const char **)argv);
+		exit(0);
+	}
+
+	if (!strcmp(argv[1], "test")) {
+
+		if (argc < 4) {
+			printf("usage: md25 test bus address\n");
+			exit(0);
+		}
+
+		const char *deviceName = "/dev/md25";
+
+		uint8_t bus = strtoul(argv[2], nullptr, 0);
+
+		uint8_t address = strtoul(argv[3], nullptr, 0);
+
+		md25Test(deviceName, bus, address);
+
+		exit(0);
+	}
+
+	if (!strcmp(argv[1], "probe")) {
+		if (argc < 4) {
+			printf("usage: md25 probe bus address\n");
+			exit(0);
+		}
+
+		const char *deviceName = "/dev/md25";
+
+		uint8_t bus = strtoul(argv[2], nullptr, 0);
+
+		uint8_t address = strtoul(argv[3], nullptr, 0);
+
+		MD25 md25(deviceName, bus, address);
+
+		int ret = md25.probe();
+
+		if (ret == OK) {
+			printf("MD25 found on bus %d at address 0x%X\n", bus, md25.get_address());
+
+		} else {
+			printf("MD25 not found on bus %d\n", bus);
+		}
+
+		exit(0);
+	}
+
+	if (!strcmp(argv[1], "search")) {
+		if (argc < 3) {
+			printf("usage: md25 search bus\n");
+			exit(0);
+		}
+
+		const char *deviceName = "/dev/md25";
+
+		uint8_t bus = strtoul(argv[2], nullptr, 0);
+
+		uint8_t address = strtoul(argv[3], nullptr, 0);
+
+		MD25 md25(deviceName, bus, address);
+
+		md25.search();
+
+		exit(0);
+	}
+
+	if (!strcmp(argv[1], "change_address")) {
+		if (argc < 5) {
+			printf("usage: md25 change_address bus old_address new_address\n");
+			exit(0);
+		}
+
+		const char *deviceName = "/dev/md25";
+
+		uint8_t bus = strtoul(argv[2], nullptr, 0);
+
+		uint8_t old_address = strtoul(argv[3], nullptr, 0);
+
+		uint8_t new_address = strtoul(argv[4], nullptr, 0);
+
+		MD25 md25(deviceName, bus, old_address);
+
+		int ret = md25.setDeviceAddress(new_address);
+
+		if (ret == OK)  {
+			printf("MD25 new address set to 0x%X\n", new_address);
+
+		} else {
+			printf("MD25 failed to set address to 0x%X\n", new_address);
+		}
+
+		exit(0);
+	}
+
+	if (!strcmp(argv[1], "stop")) {
+		thread_should_exit = true;
+		exit(0);
+	}
+
+	if (!strcmp(argv[1], "status")) {
+		if (thread_running) {
+			printf("\tmd25 app is running\n");
+
+		} else {
+			printf("\tmd25 app not started\n");
+		}
+
+		exit(0);
+	}
+
+	usage("unrecognized command");
+	exit(1);
+}
+
+int md25_thread_main(int argc, char *argv[])
+{
+	printf("[MD25] starting\n");
+
+	if (argc < 5) {
+		// extra md25 in arg list since this is a thread
+		printf("usage: md25 start bus address\n");
+		exit(0);
+	}
+
+	const char *deviceName = "/dev/md25";
+
+	uint8_t bus = strtoul(argv[3], nullptr, 0);
+
+	uint8_t address = strtoul(argv[4], nullptr, 0);
+
+	// start
+	MD25 md25("/dev/md25", bus, address);
+
+	thread_running = true;
+
+	// loop
+	while (!thread_should_exit) {
+		md25.update();
+	}
+
+	// exit
+	printf("[MD25] exiting.\n");
+	thread_running = false;
+	return 0;
+}
+
+// vi:noet:smarttab:autoindent:ts=4:sw=4:tw=78