diff options
author | Andrew Tridgell <andrew@tridgell.net> | 2014-12-29 20:45:31 +1100 |
---|---|---|
committer | Thomas Gubler <thomasgubler@gmail.com> | 2014-12-30 20:55:57 +0100 |
commit | e537de20e3f06525ce9900109a0574142d3e6833 (patch) | |
tree | 60046972ce050878accfcc1879e303ab0919d54c /src/drivers/mpu6000 | |
parent | 333039d3db7b1f3b4bfb06c27874bf3372b7d750 (diff) | |
download | px4-firmware-e537de20e3f06525ce9900109a0574142d3e6833.tar.gz px4-firmware-e537de20e3f06525ce9900109a0574142d3e6833.tar.bz2 px4-firmware-e537de20e3f06525ce9900109a0574142d3e6833.zip |
mpu6000: wait for 10ms after a full reset
this prevents the mpu6000 getting in a really weird state!
Diffstat (limited to 'src/drivers/mpu6000')
-rw-r--r-- | src/drivers/mpu6000/mpu6000.cpp | 31 |
1 files changed, 24 insertions, 7 deletions
diff --git a/src/drivers/mpu6000/mpu6000.cpp b/src/drivers/mpu6000/mpu6000.cpp index 8dfac9859..558006d0d 100644 --- a/src/drivers/mpu6000/mpu6000.cpp +++ b/src/drivers/mpu6000/mpu6000.cpp @@ -253,6 +253,7 @@ private: perf_counter_t _reset_retries; uint8_t _register_wait; + uint64_t _reset_wait; math::LowPassFilter2p _accel_filter_x; math::LowPassFilter2p _accel_filter_y; @@ -490,6 +491,7 @@ MPU6000::MPU6000(int bus, const char *path_accel, const char *path_gyro, spi_dev _good_transfers(perf_alloc(PC_COUNT, "mpu6000_good_transfers")), _reset_retries(perf_alloc(PC_COUNT, "mpu6000_reset_retries")), _register_wait(0), + _reset_wait(0), _accel_filter_x(MPU6000_ACCEL_DEFAULT_RATE, MPU6000_ACCEL_DEFAULT_DRIVER_FILTER_FREQ), _accel_filter_y(MPU6000_ACCEL_DEFAULT_RATE, MPU6000_ACCEL_DEFAULT_DRIVER_FILTER_FREQ), _accel_filter_z(MPU6000_ACCEL_DEFAULT_RATE, MPU6000_ACCEL_DEFAULT_DRIVER_FILTER_FREQ), @@ -749,9 +751,9 @@ int MPU6000::reset() usleep(1000); // INT CFG => Interrupt on Data Ready - write_reg(MPUREG_INT_ENABLE, BIT_RAW_RDY_EN); // INT: Raw data ready + write_checked_reg(MPUREG_INT_ENABLE, BIT_RAW_RDY_EN); // INT: Raw data ready usleep(1000); - write_reg(MPUREG_INT_PIN_CFG, BIT_INT_ANYRD_2CLEAR); // INT: Clear on any read + write_checked_reg(MPUREG_INT_PIN_CFG, BIT_INT_ANYRD_2CLEAR); // INT: Clear on any read usleep(1000); // Oscillator set @@ -800,7 +802,7 @@ MPU6000::_set_sample_rate(uint16_t desired_sample_rate_hz) uint8_t div = 1000 / desired_sample_rate_hz; if(div>200) div=200; if(div<1) div=1; - write_reg(MPUREG_SMPLRT_DIV, div-1); + write_checked_reg(MPUREG_SMPLRT_DIV, div-1); _sample_rate = 1000 / div; } @@ -937,7 +939,7 @@ MPU6000::gyro_self_test() /* perform a self-test comparison to factory trim values. This takes about 200ms and will return OK if the current values are within 14% - of the expected values + of the expected values (as per datasheet) */ int MPU6000::factory_self_test() @@ -1518,10 +1520,20 @@ MPU6000::check_registers(void) /* try to fix the bad register value. We only try to fix one per loop to prevent a bad sensor hogging the - bus. We skip zero as that is the PRODUCT_ID, which - is not writeable + bus. */ - if (_checked_next != 0) { + if (_checked_next == 0) { + // if the product_id is wrong then reset the + // sensor completely + write_reg(MPUREG_PWR_MGMT_1, BIT_H_RESET); + // after doing a reset we need to wait a long + // time before we do any other register writes + // or we will end up with the mpu6000 in a + // bizarre state where it has all correct + // register values but large offsets on the + // accel axes + _reset_wait = hrt_absolute_time() + 10000; + } else { write_reg(_checked_registers[_checked_next], _checked_values[_checked_next]); } #if 0 @@ -1545,6 +1557,11 @@ MPU6000::measure() return; } + if (hrt_absolute_time() < _reset_wait) { + // we're waiting for a reset to complete + return; + } + struct MPUReport mpu_report; struct Report { int16_t accel_x; |