diff options
author | px4dev <px4@purgatory.org> | 2013-08-13 00:34:41 -0700 |
---|---|---|
committer | px4dev <px4@purgatory.org> | 2013-08-13 00:34:41 -0700 |
commit | de749a3602423f5ee6ca56f3cf2dfff04e31ec6d (patch) | |
tree | c2fa4a07fabc79007fa052a1bf50673b5692fcc0 /src/drivers/stm32/drv_hrt.c | |
parent | 56d355414cbfef92b39af6830932e7f1487b03b9 (diff) | |
download | px4-firmware-de749a3602423f5ee6ca56f3cf2dfff04e31ec6d.tar.gz px4-firmware-de749a3602423f5ee6ca56f3cf2dfff04e31ec6d.tar.bz2 px4-firmware-de749a3602423f5ee6ca56f3cf2dfff04e31ec6d.zip |
Stop expecting CONFIG_HRT_anything since we aren't baking it into the NuttX config anymore.
Diffstat (limited to 'src/drivers/stm32/drv_hrt.c')
-rw-r--r-- | src/drivers/stm32/drv_hrt.c | 20 |
1 files changed, 10 insertions, 10 deletions
diff --git a/src/drivers/stm32/drv_hrt.c b/src/drivers/stm32/drv_hrt.c index 7ef3db970..83a1a1abb 100644 --- a/src/drivers/stm32/drv_hrt.c +++ b/src/drivers/stm32/drv_hrt.c @@ -70,7 +70,7 @@ #include "stm32_gpio.h" #include "stm32_tim.h" -#ifdef CONFIG_HRT_TIMER +#ifdef HRT_TIMER /* HRT configuration */ #if HRT_TIMER == 1 @@ -155,7 +155,7 @@ # error must not set CONFIG_STM32_TIM11=y and HRT_TIMER=11 # endif #else -# error HRT_TIMER must be set in board.h if CONFIG_HRT_TIMER=y +# error HRT_TIMER must be a value between 1 and 11 #endif /* @@ -275,7 +275,7 @@ static void hrt_call_invoke(void); /* * Specific registers and bits used by PPM sub-functions */ -#ifdef CONFIG_HRT_PPM +#ifdef HRT_PPM_CHANNEL /* * If the timer hardware doesn't support GTIM_CCER_CCxNP, then we will work around it. * @@ -326,7 +326,7 @@ static void hrt_call_invoke(void); # define CCER_PPM (GTIM_CCER_CC4E | GTIM_CCER_CC4P | GTIM_CCER_CC4NP) /* CC4, both edges */ # define CCER_PPM_FLIP GTIM_CCER_CC4P # else -# error HRT_PPM_CHANNEL must be a value between 1 and 4 if CONFIG_HRT_PPM is set +# error HRT_PPM_CHANNEL must be a value between 1 and 4 # endif /* @@ -377,7 +377,7 @@ static void hrt_ppm_decode(uint32_t status); # define CCMR1_PPM 0 # define CCMR2_PPM 0 # define CCER_PPM 0 -#endif /* CONFIG_HRT_PPM */ +#endif /* HRT_PPM_CHANNEL */ /* * Initialise the timer we are going to use. @@ -424,7 +424,7 @@ hrt_tim_init(void) up_enable_irq(HRT_TIMER_VECTOR); } -#ifdef CONFIG_HRT_PPM +#ifdef HRT_PPM_CHANNEL /* * Handle the PPM decoder state machine. */ @@ -526,7 +526,7 @@ error: ppm_decoded_channels = 0; } -#endif /* CONFIG_HRT_PPM */ +#endif /* HRT_PPM_CHANNEL */ /* * Handle the compare interupt by calling the callout dispatcher @@ -546,7 +546,7 @@ hrt_tim_isr(int irq, void *context) /* ack the interrupts we just read */ rSR = ~status; -#ifdef CONFIG_HRT_PPM +#ifdef HRT_PPM_CHANNEL /* was this a PPM edge? */ if (status & (SR_INT_PPM | SR_OVF_PPM)) { @@ -686,7 +686,7 @@ hrt_init(void) sq_init(&callout_queue); hrt_tim_init(); -#ifdef CONFIG_HRT_PPM +#ifdef HRT_PPM_CHANNEL /* configure the PPM input pin */ stm32_configgpio(GPIO_PPM_IN); #endif @@ -907,4 +907,4 @@ hrt_latency_update(void) } -#endif /* CONFIG_HRT_TIMER */ +#endif /* HRT_TIMER */ |