diff options
author | James Goppert <james.goppert@gmail.com> | 2013-08-03 12:18:41 -0400 |
---|---|---|
committer | James Goppert <james.goppert@gmail.com> | 2013-08-03 12:18:41 -0400 |
commit | 8f1487b1570ddd79bbd027d3a1bed0c712d2871b (patch) | |
tree | 7293f01a368aed8d539dac99b051e5e562952a02 /src/drivers | |
parent | a569cd834c13052ef3210ab9b8c1afd03b81fef6 (diff) | |
parent | 24c43ad62d03fdfc0a13b5e6fae22c29bbc827c3 (diff) | |
download | px4-firmware-8f1487b1570ddd79bbd027d3a1bed0c712d2871b.tar.gz px4-firmware-8f1487b1570ddd79bbd027d3a1bed0c712d2871b.tar.bz2 px4-firmware-8f1487b1570ddd79bbd027d3a1bed0c712d2871b.zip |
Merge branch 'master' of github.com:jgoppert/Firmware into md25_dev
Diffstat (limited to 'src/drivers')
-rw-r--r-- | src/drivers/airspeed/airspeed.cpp | 378 | ||||
-rw-r--r-- | src/drivers/airspeed/airspeed.h | 169 | ||||
-rw-r--r-- | src/drivers/airspeed/module.mk | 38 | ||||
-rw-r--r-- | src/drivers/drv_airspeed.h | 9 | ||||
-rw-r--r-- | src/drivers/ets_airspeed/ets_airspeed.cpp | 398 | ||||
-rw-r--r-- | src/drivers/ets_airspeed/module.mk | 2 | ||||
-rw-r--r-- | src/drivers/meas_airspeed/meas_airspeed.cpp | 506 | ||||
-rw-r--r-- | src/drivers/meas_airspeed/module.mk | 41 | ||||
-rw-r--r-- | src/drivers/mpu6000/mpu6000.cpp | 44 |
9 files changed, 1195 insertions, 390 deletions
diff --git a/src/drivers/airspeed/airspeed.cpp b/src/drivers/airspeed/airspeed.cpp new file mode 100644 index 000000000..5a8157deb --- /dev/null +++ b/src/drivers/airspeed/airspeed.cpp @@ -0,0 +1,378 @@ +/**************************************************************************** + * + * Copyright (C) 2013 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file ets_airspeed.cpp + * @author Simon Wilks + * + * Driver for the Eagle Tree Airspeed V3 connected via I2C. + */ + +#include <nuttx/config.h> + +#include <drivers/device/i2c.h> + +#include <sys/types.h> +#include <stdint.h> +#include <stdlib.h> +#include <stdbool.h> +#include <semaphore.h> +#include <string.h> +#include <fcntl.h> +#include <poll.h> +#include <errno.h> +#include <stdio.h> +#include <math.h> +#include <unistd.h> + +#include <nuttx/arch.h> +#include <nuttx/wqueue.h> +#include <nuttx/clock.h> + +#include <arch/board/board.h> + +#include <systemlib/airspeed.h> +#include <systemlib/err.h> +#include <systemlib/param/param.h> +#include <systemlib/perf_counter.h> + +#include <drivers/drv_airspeed.h> +#include <drivers/drv_hrt.h> + +#include <uORB/uORB.h> +#include <uORB/topics/differential_pressure.h> +#include <uORB/topics/subsystem_info.h> + +#include <drivers/airspeed/airspeed.h> + +Airspeed::Airspeed(int bus, int address, unsigned conversion_interval) : + I2C("Airspeed", AIRSPEED_DEVICE_PATH, bus, address, 100000), + _num_reports(0), + _next_report(0), + _oldest_report(0), + _reports(nullptr), + _sensor_ok(false), + _measure_ticks(0), + _collect_phase(false), + _diff_pres_offset(0.0f), + _airspeed_pub(-1), + _conversion_interval(conversion_interval), + _sample_perf(perf_alloc(PC_ELAPSED, "airspeed_read")), + _comms_errors(perf_alloc(PC_COUNT, "airspeed_comms_errors")), + _buffer_overflows(perf_alloc(PC_COUNT, "airspeed_buffer_overflows")) +{ + // enable debug() calls + _debug_enabled = true; + + // work_cancel in the dtor will explode if we don't do this... + memset(&_work, 0, sizeof(_work)); +} + +Airspeed::~Airspeed() +{ + /* make sure we are truly inactive */ + stop(); + + /* free any existing reports */ + if (_reports != nullptr) + delete[] _reports; +} + +int +Airspeed::init() +{ + int ret = ERROR; + + /* do I2C init (and probe) first */ + if (I2C::init() != OK) + goto out; + + /* allocate basic report buffers */ + _num_reports = 2; + _reports = new struct differential_pressure_s[_num_reports]; + + for (unsigned i = 0; i < _num_reports; i++) + _reports[i].max_differential_pressure_pa = 0; + + if (_reports == nullptr) + goto out; + + _oldest_report = _next_report = 0; + + /* get a publish handle on the airspeed topic */ + memset(&_reports[0], 0, sizeof(_reports[0])); + _airspeed_pub = orb_advertise(ORB_ID(differential_pressure), &_reports[0]); + + if (_airspeed_pub < 0) + warnx("failed to create airspeed sensor object. Did you start uOrb?"); + + ret = OK; + /* sensor is ok, but we don't really know if it is within range */ + _sensor_ok = true; +out: + return ret; +} + +int +Airspeed::probe() +{ + return measure(); +} + +int +Airspeed::ioctl(struct file *filp, int cmd, unsigned long arg) +{ + switch (cmd) { + + case SENSORIOCSPOLLRATE: { + switch (arg) { + + /* switching to manual polling */ + case SENSOR_POLLRATE_MANUAL: + stop(); + _measure_ticks = 0; + return OK; + + /* external signalling (DRDY) not supported */ + case SENSOR_POLLRATE_EXTERNAL: + + /* zero would be bad */ + case 0: + return -EINVAL; + + /* set default/max polling rate */ + case SENSOR_POLLRATE_MAX: + case SENSOR_POLLRATE_DEFAULT: { + /* do we need to start internal polling? */ + bool want_start = (_measure_ticks == 0); + + /* set interval for next measurement to minimum legal value */ + _measure_ticks = USEC2TICK(_conversion_interval); + + /* if we need to start the poll state machine, do it */ + if (want_start) + start(); + + return OK; + } + + /* adjust to a legal polling interval in Hz */ + default: { + /* do we need to start internal polling? */ + bool want_start = (_measure_ticks == 0); + + /* convert hz to tick interval via microseconds */ + unsigned ticks = USEC2TICK(1000000 / arg); + + /* check against maximum rate */ + if (ticks < USEC2TICK(_conversion_interval)) + return -EINVAL; + + /* update interval for next measurement */ + _measure_ticks = ticks; + + /* if we need to start the poll state machine, do it */ + if (want_start) + start(); + + return OK; + } + } + } + + case SENSORIOCGPOLLRATE: + if (_measure_ticks == 0) + return SENSOR_POLLRATE_MANUAL; + + return (1000 / _measure_ticks); + + case SENSORIOCSQUEUEDEPTH: { + /* add one to account for the sentinel in the ring */ + arg++; + + /* lower bound is mandatory, upper bound is a sanity check */ + if ((arg < 2) || (arg > 100)) + return -EINVAL; + + /* allocate new buffer */ + struct differential_pressure_s *buf = new struct differential_pressure_s[arg]; + + if (nullptr == buf) + return -ENOMEM; + + /* reset the measurement state machine with the new buffer, free the old */ + stop(); + delete[] _reports; + _num_reports = arg; + _reports = buf; + start(); + + return OK; + } + + case SENSORIOCGQUEUEDEPTH: + return _num_reports - 1; + + case SENSORIOCRESET: + /* XXX implement this */ + return -EINVAL; + + case AIRSPEEDIOCSSCALE: { + struct airspeed_scale *s = (struct airspeed_scale*)arg; + _diff_pres_offset = s->offset_pa; + return OK; + } + + case AIRSPEEDIOCGSCALE: { + struct airspeed_scale *s = (struct airspeed_scale*)arg; + s->offset_pa = _diff_pres_offset; + s->scale = 1.0f; + return OK; + } + + default: + /* give it to the superclass */ + return I2C::ioctl(filp, cmd, arg); + } +} + +ssize_t +Airspeed::read(struct file *filp, char *buffer, size_t buflen) +{ + unsigned count = buflen / sizeof(struct differential_pressure_s); + int ret = 0; + + /* buffer must be large enough */ + if (count < 1) + return -ENOSPC; + + /* if automatic measurement is enabled */ + if (_measure_ticks > 0) { + + /* + * While there is space in the caller's buffer, and reports, copy them. + * Note that we may be pre-empted by the workq thread while we are doing this; + * we are careful to avoid racing with them. + */ + while (count--) { + if (_oldest_report != _next_report) { + memcpy(buffer, _reports + _oldest_report, sizeof(*_reports)); + ret += sizeof(_reports[0]); + INCREMENT(_oldest_report, _num_reports); + } + } + + /* if there was no data, warn the caller */ + return ret ? ret : -EAGAIN; + } + + /* manual measurement - run one conversion */ + /* XXX really it'd be nice to lock against other readers here */ + do { + _oldest_report = _next_report = 0; + + /* trigger a measurement */ + if (OK != measure()) { + ret = -EIO; + break; + } + + /* wait for it to complete */ + usleep(_conversion_interval); + + /* run the collection phase */ + if (OK != collect()) { + ret = -EIO; + break; + } + + /* state machine will have generated a report, copy it out */ + memcpy(buffer, _reports, sizeof(*_reports)); + ret = sizeof(*_reports); + + } while (0); + + return ret; +} + +void +Airspeed::start() +{ + /* reset the report ring and state machine */ + _collect_phase = false; + _oldest_report = _next_report = 0; + + /* schedule a cycle to start things */ + work_queue(HPWORK, &_work, (worker_t)&Airspeed::cycle_trampoline, this, 1); + + /* notify about state change */ + struct subsystem_info_s info = { + true, + true, + true, + SUBSYSTEM_TYPE_DIFFPRESSURE + }; + static orb_advert_t pub = -1; + + if (pub > 0) { + orb_publish(ORB_ID(subsystem_info), pub, &info); + + } else { + pub = orb_advertise(ORB_ID(subsystem_info), &info); + } +} + +void +Airspeed::stop() +{ + work_cancel(HPWORK, &_work); +} + +void +Airspeed::cycle_trampoline(void *arg) +{ + Airspeed *dev = (Airspeed *)arg; + + dev->cycle(); +} + +void +Airspeed::print_info() +{ + perf_print_counter(_sample_perf); + perf_print_counter(_comms_errors); + perf_print_counter(_buffer_overflows); + warnx("poll interval: %u ticks", _measure_ticks); + warnx("report queue: %u (%u/%u @ %p)", + _num_reports, _oldest_report, _next_report, _reports); +} diff --git a/src/drivers/airspeed/airspeed.h b/src/drivers/airspeed/airspeed.h new file mode 100644 index 000000000..89dfb22d7 --- /dev/null +++ b/src/drivers/airspeed/airspeed.h @@ -0,0 +1,169 @@ +/**************************************************************************** + * + * Copyright (C) 2013 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file airspeed.h + * @author Simon Wilks + * + * Generic driver for airspeed sensors connected via I2C. + */ + +#include <nuttx/config.h> + +#include <drivers/device/i2c.h> + +#include <sys/types.h> +#include <stdint.h> +#include <stdlib.h> +#include <stdbool.h> +#include <semaphore.h> +#include <string.h> +#include <fcntl.h> +#include <poll.h> +#include <errno.h> +#include <stdio.h> +#include <math.h> +#include <unistd.h> + +#include <nuttx/arch.h> +#include <nuttx/wqueue.h> +#include <nuttx/clock.h> + +#include <arch/board/board.h> + +#include <systemlib/airspeed.h> +#include <systemlib/err.h> +#include <systemlib/param/param.h> +#include <systemlib/perf_counter.h> + +#include <drivers/drv_airspeed.h> +#include <drivers/drv_hrt.h> + +#include <uORB/uORB.h> +#include <uORB/topics/differential_pressure.h> +#include <uORB/topics/subsystem_info.h> + +/* Default I2C bus */ +#define PX4_I2C_BUS_DEFAULT PX4_I2C_BUS_EXPANSION + +/* Oddly, ERROR is not defined for C++ */ +#ifdef ERROR +# undef ERROR +#endif +static const int ERROR = -1; + +#ifndef CONFIG_SCHED_WORKQUEUE +# error This requires CONFIG_SCHED_WORKQUEUE. +#endif + +class __EXPORT Airspeed : public device::I2C +{ +public: + Airspeed(int bus, int address, unsigned conversion_interval); + virtual ~Airspeed(); + + virtual int init(); + + virtual ssize_t read(struct file *filp, char *buffer, size_t buflen); + virtual int ioctl(struct file *filp, int cmd, unsigned long arg); + + /** + * Diagnostics - print some basic information about the driver. + */ + virtual void print_info(); + +protected: + virtual int probe(); + + /** + * Perform a poll cycle; collect from the previous measurement + * and start a new one. + */ + virtual void cycle() = 0; + virtual int measure() = 0; + virtual int collect() = 0; + + work_s _work; + unsigned _num_reports; + volatile unsigned _next_report; + volatile unsigned _oldest_report; + differential_pressure_s *_reports; + bool _sensor_ok; + int _measure_ticks; + bool _collect_phase; + float _diff_pres_offset; + + orb_advert_t _airspeed_pub; + + unsigned _conversion_interval; + + perf_counter_t _sample_perf; + perf_counter_t _comms_errors; + perf_counter_t _buffer_overflows; + + + /** + * Test whether the device supported by the driver is present at a + * specific address. + * + * @param address The I2C bus address to probe. + * @return True if the device is present. + */ + int probe_address(uint8_t address); + + /** + * Initialise the automatic measurement state machine and start it. + * + * @note This function is called at open and error time. It might make sense + * to make it more aggressive about resetting the bus in case of errors. + */ + void start(); + + /** + * Stop the automatic measurement state machine. + */ + void stop(); + + /** + * Static trampoline from the workq context; because we don't have a + * generic workq wrapper yet. + * + * @param arg Instance pointer for the driver that is polling. + */ + static void cycle_trampoline(void *arg); + +}; + +/* helper macro for handling report buffer indices */ +#define INCREMENT(_x, _lim) do { _x++; if (_x >= _lim) _x = 0; } while(0) + diff --git a/src/drivers/airspeed/module.mk b/src/drivers/airspeed/module.mk new file mode 100644 index 000000000..4eef06161 --- /dev/null +++ b/src/drivers/airspeed/module.mk @@ -0,0 +1,38 @@ +############################################################################ +# +# Copyright (c) 2013 PX4 Development Team. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name PX4 nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +# +# Makefile to build the generic airspeed driver. +# + +SRCS = airspeed.cpp diff --git a/src/drivers/drv_airspeed.h b/src/drivers/drv_airspeed.h index bffc35c62..7bb9ee2af 100644 --- a/src/drivers/drv_airspeed.h +++ b/src/drivers/drv_airspeed.h @@ -57,5 +57,14 @@ #define _AIRSPEEDIOCBASE (0x7700) #define __AIRSPEEDIOC(_n) (_IOC(_AIRSPEEDIOCBASE, _n)) +#define AIRSPEEDIOCSSCALE __AIRSPEEDIOC(0) +#define AIRSPEEDIOCGSCALE __AIRSPEEDIOC(1) + + +/** airspeed scaling factors; out = (in * Vscale) + offset */ +struct airspeed_scale { + float offset_pa; + float scale; +}; #endif /* _DRV_AIRSPEED_H */ diff --git a/src/drivers/ets_airspeed/ets_airspeed.cpp b/src/drivers/ets_airspeed/ets_airspeed.cpp index b34d3fa5d..de8028b0f 100644 --- a/src/drivers/ets_airspeed/ets_airspeed.cpp +++ b/src/drivers/ets_airspeed/ets_airspeed.cpp @@ -72,9 +72,7 @@ #include <uORB/uORB.h> #include <uORB/topics/differential_pressure.h> #include <uORB/topics/subsystem_info.h> - -/* Default I2C bus */ -#define PX4_I2C_BUS_DEFAULT PX4_I2C_BUS_EXPANSION +#include <drivers/airspeed/airspeed.h> /* I2C bus address */ #define I2C_ADDRESS 0x75 /* 7-bit address. 8-bit address is 0xEA */ @@ -91,336 +89,32 @@ /* Measurement rate is 100Hz */ #define CONVERSION_INTERVAL (1000000 / 100) /* microseconds */ -/* Oddly, ERROR is not defined for C++ */ -#ifdef ERROR -# undef ERROR -#endif -static const int ERROR = -1; - -#ifndef CONFIG_SCHED_WORKQUEUE -# error This requires CONFIG_SCHED_WORKQUEUE. -#endif - -class ETSAirspeed : public device::I2C +class ETSAirspeed : public Airspeed { public: ETSAirspeed(int bus, int address = I2C_ADDRESS); - virtual ~ETSAirspeed(); - - virtual int init(); - - virtual ssize_t read(struct file *filp, char *buffer, size_t buflen); - virtual int ioctl(struct file *filp, int cmd, unsigned long arg); - - /** - * Diagnostics - print some basic information about the driver. - */ - void print_info(); protected: - virtual int probe(); - -private: - work_s _work; - unsigned _num_reports; - volatile unsigned _next_report; - volatile unsigned _oldest_report; - differential_pressure_s *_reports; - bool _sensor_ok; - int _measure_ticks; - bool _collect_phase; - int _diff_pres_offset; - - orb_advert_t _airspeed_pub; - - perf_counter_t _sample_perf; - perf_counter_t _comms_errors; - perf_counter_t _buffer_overflows; - - - /** - * Test whether the device supported by the driver is present at a - * specific address. - * - * @param address The I2C bus address to probe. - * @return True if the device is present. - */ - int probe_address(uint8_t address); - - /** - * Initialise the automatic measurement state machine and start it. - * - * @note This function is called at open and error time. It might make sense - * to make it more aggressive about resetting the bus in case of errors. - */ - void start(); - - /** - * Stop the automatic measurement state machine. - */ - void stop(); /** * Perform a poll cycle; collect from the previous measurement * and start a new one. */ - void cycle(); - int measure(); - int collect(); - - /** - * Static trampoline from the workq context; because we don't have a - * generic workq wrapper yet. - * - * @param arg Instance pointer for the driver that is polling. - */ - static void cycle_trampoline(void *arg); - + virtual void cycle(); + virtual int measure(); + virtual int collect(); }; -/* helper macro for handling report buffer indices */ -#define INCREMENT(_x, _lim) do { _x++; if (_x >= _lim) _x = 0; } while(0) - /* * Driver 'main' command. */ extern "C" __EXPORT int ets_airspeed_main(int argc, char *argv[]); -ETSAirspeed::ETSAirspeed(int bus, int address) : - I2C("ETSAirspeed", AIRSPEED_DEVICE_PATH, bus, address, 100000), - _num_reports(0), - _next_report(0), - _oldest_report(0), - _reports(nullptr), - _sensor_ok(false), - _measure_ticks(0), - _collect_phase(false), - _diff_pres_offset(0), - _airspeed_pub(-1), - _sample_perf(perf_alloc(PC_ELAPSED, "ets_airspeed_read")), - _comms_errors(perf_alloc(PC_COUNT, "ets_airspeed_comms_errors")), - _buffer_overflows(perf_alloc(PC_COUNT, "ets_airspeed_buffer_overflows")) -{ - // enable debug() calls - _debug_enabled = true; - - // work_cancel in the dtor will explode if we don't do this... - memset(&_work, 0, sizeof(_work)); -} - -ETSAirspeed::~ETSAirspeed() -{ - /* make sure we are truly inactive */ - stop(); - - /* free any existing reports */ - if (_reports != nullptr) - delete[] _reports; -} - -int -ETSAirspeed::init() -{ - int ret = ERROR; - - /* do I2C init (and probe) first */ - if (I2C::init() != OK) - goto out; - - /* allocate basic report buffers */ - _num_reports = 2; - _reports = new struct differential_pressure_s[_num_reports]; - - for (unsigned i = 0; i < _num_reports; i++) - _reports[i].max_differential_pressure_pa = 0; - - if (_reports == nullptr) - goto out; - - _oldest_report = _next_report = 0; - - /* get a publish handle on the airspeed topic */ - memset(&_reports[0], 0, sizeof(_reports[0])); - _airspeed_pub = orb_advertise(ORB_ID(differential_pressure), &_reports[0]); - - if (_airspeed_pub < 0) - debug("failed to create airspeed sensor object. Did you start uOrb?"); - - ret = OK; - /* sensor is ok, but we don't really know if it is within range */ - _sensor_ok = true; -out: - return ret; -} - -int -ETSAirspeed::probe() -{ - return measure(); -} - -int -ETSAirspeed::ioctl(struct file *filp, int cmd, unsigned long arg) -{ - switch (cmd) { - - case SENSORIOCSPOLLRATE: { - switch (arg) { - - /* switching to manual polling */ - case SENSOR_POLLRATE_MANUAL: - stop(); - _measure_ticks = 0; - return OK; - - /* external signalling (DRDY) not supported */ - case SENSOR_POLLRATE_EXTERNAL: - - /* zero would be bad */ - case 0: - return -EINVAL; - - /* set default/max polling rate */ - case SENSOR_POLLRATE_MAX: - case SENSOR_POLLRATE_DEFAULT: { - /* do we need to start internal polling? */ - bool want_start = (_measure_ticks == 0); - - /* set interval for next measurement to minimum legal value */ - _measure_ticks = USEC2TICK(CONVERSION_INTERVAL); - - /* if we need to start the poll state machine, do it */ - if (want_start) - start(); - - return OK; - } - - /* adjust to a legal polling interval in Hz */ - default: { - /* do we need to start internal polling? */ - bool want_start = (_measure_ticks == 0); - - /* convert hz to tick interval via microseconds */ - unsigned ticks = USEC2TICK(1000000 / arg); - - /* check against maximum rate */ - if (ticks < USEC2TICK(CONVERSION_INTERVAL)) - return -EINVAL; - - /* update interval for next measurement */ - _measure_ticks = ticks; - - /* if we need to start the poll state machine, do it */ - if (want_start) - start(); - - return OK; - } - } - } - - case SENSORIOCGPOLLRATE: - if (_measure_ticks == 0) - return SENSOR_POLLRATE_MANUAL; - - return (1000 / _measure_ticks); - - case SENSORIOCSQUEUEDEPTH: { - /* add one to account for the sentinel in the ring */ - arg++; - - /* lower bound is mandatory, upper bound is a sanity check */ - if ((arg < 2) || (arg > 100)) - return -EINVAL; - - /* allocate new buffer */ - struct differential_pressure_s *buf = new struct differential_pressure_s[arg]; - - if (nullptr == buf) - return -ENOMEM; - - /* reset the measurement state machine with the new buffer, free the old */ - stop(); - delete[] _reports; - _num_reports = arg; - _reports = buf; - start(); - - return OK; - } - - case SENSORIOCGQUEUEDEPTH: - return _num_reports - 1; - - case SENSORIOCRESET: - /* XXX implement this */ - return -EINVAL; - - default: - /* give it to the superclass */ - return I2C::ioctl(filp, cmd, arg); - } -} - -ssize_t -ETSAirspeed::read(struct file *filp, char *buffer, size_t buflen) +ETSAirspeed::ETSAirspeed(int bus, int address) : Airspeed(bus, address, + CONVERSION_INTERVAL) { - unsigned count = buflen / sizeof(struct differential_pressure_s); - int ret = 0; - - /* buffer must be large enough */ - if (count < 1) - return -ENOSPC; - - /* if automatic measurement is enabled */ - if (_measure_ticks > 0) { - - /* - * While there is space in the caller's buffer, and reports, copy them. - * Note that we may be pre-empted by the workq thread while we are doing this; - * we are careful to avoid racing with them. - */ - while (count--) { - if (_oldest_report != _next_report) { - memcpy(buffer, _reports + _oldest_report, sizeof(*_reports)); - ret += sizeof(_reports[0]); - INCREMENT(_oldest_report, _num_reports); - } - } - - /* if there was no data, warn the caller */ - return ret ? ret : -EAGAIN; - } - /* manual measurement - run one conversion */ - /* XXX really it'd be nice to lock against other readers here */ - do { - _oldest_report = _next_report = 0; - - /* trigger a measurement */ - if (OK != measure()) { - ret = -EIO; - break; - } - - /* wait for it to complete */ - usleep(CONVERSION_INTERVAL); - - /* run the collection phase */ - if (OK != collect()) { - ret = -EIO; - break; - } - - /* state machine will have generated a report, copy it out */ - memcpy(buffer, _reports, sizeof(*_reports)); - ret = sizeof(*_reports); - - } while (0); - - return ret; } int @@ -463,9 +157,15 @@ ETSAirspeed::collect() } uint16_t diff_pres_pa = val[1] << 8 | val[0]; + if (diff_pres_pa == 0) { + // a zero value means the pressure sensor cannot give us a + // value. We need to return, and not report a value or the + // caller could end up using this value as part of an + // average + log("zero value from sensor"); + return -1; + } - // XXX move the parameter read out of the driver. - param_get(param_find("SENS_DPRES_OFF"), &_diff_pres_offset); if (diff_pres_pa < _diff_pres_offset + MIN_ACCURATE_DIFF_PRES_PA) { diff_pres_pa = 0; @@ -506,47 +206,6 @@ ETSAirspeed::collect() } void -ETSAirspeed::start() -{ - /* reset the report ring and state machine */ - _collect_phase = false; - _oldest_report = _next_report = 0; - - /* schedule a cycle to start things */ - work_queue(HPWORK, &_work, (worker_t)&ETSAirspeed::cycle_trampoline, this, 1); - - /* notify about state change */ - struct subsystem_info_s info = { - true, - true, - true, - SUBSYSTEM_TYPE_DIFFPRESSURE - }; - static orb_advert_t pub = -1; - - if (pub > 0) { - orb_publish(ORB_ID(subsystem_info), pub, &info); - - } else { - pub = orb_advertise(ORB_ID(subsystem_info), &info); - } -} - -void -ETSAirspeed::stop() -{ - work_cancel(HPWORK, &_work); -} - -void -ETSAirspeed::cycle_trampoline(void *arg) -{ - ETSAirspeed *dev = (ETSAirspeed *)arg; - - dev->cycle(); -} - -void ETSAirspeed::cycle() { /* collection phase? */ @@ -571,7 +230,7 @@ ETSAirspeed::cycle() /* schedule a fresh cycle call when we are ready to measure again */ work_queue(HPWORK, &_work, - (worker_t)&ETSAirspeed::cycle_trampoline, + (worker_t)&Airspeed::cycle_trampoline, this, _measure_ticks - USEC2TICK(CONVERSION_INTERVAL)); @@ -589,22 +248,11 @@ ETSAirspeed::cycle() /* schedule a fresh cycle call when the measurement is done */ work_queue(HPWORK, &_work, - (worker_t)&ETSAirspeed::cycle_trampoline, + (worker_t)&Airspeed::cycle_trampoline, this, USEC2TICK(CONVERSION_INTERVAL)); } -void -ETSAirspeed::print_info() -{ - perf_print_counter(_sample_perf); - perf_print_counter(_comms_errors); - perf_print_counter(_buffer_overflows); - printf("poll interval: %u ticks\n", _measure_ticks); - printf("report queue: %u (%u/%u @ %p)\n", - _num_reports, _oldest_report, _next_report, _reports); -} - /** * Local functions in support of the shell command. */ @@ -642,7 +290,7 @@ start(int i2c_bus) if (g_dev == nullptr) goto fail; - if (OK != g_dev->init()) + if (OK != g_dev->Airspeed::init()) goto fail; /* set the poll rate to default, starts automatic data collection */ @@ -779,11 +427,11 @@ info() static void ets_airspeed_usage() { - fprintf(stderr, "usage: ets_airspeed command [options]\n"); - fprintf(stderr, "options:\n"); - fprintf(stderr, "\t-b --bus i2cbus (%d)\n", PX4_I2C_BUS_DEFAULT); - fprintf(stderr, "command:\n"); - fprintf(stderr, "\tstart|stop|reset|test|info\n"); + warnx("usage: ets_airspeed command [options]"); + warnx("options:"); + warnx("\t-b --bus i2cbus (%d)", PX4_I2C_BUS_DEFAULT); + warnx("command:"); + warnx("\tstart|stop|reset|test|info"); } int diff --git a/src/drivers/ets_airspeed/module.mk b/src/drivers/ets_airspeed/module.mk index cb5d3b1ed..15346c5c5 100644 --- a/src/drivers/ets_airspeed/module.mk +++ b/src/drivers/ets_airspeed/module.mk @@ -36,6 +36,6 @@ # MODULE_COMMAND = ets_airspeed -MODULE_STACKSIZE = 1024 +MODULE_STACKSIZE = 2048 SRCS = ets_airspeed.cpp diff --git a/src/drivers/meas_airspeed/meas_airspeed.cpp b/src/drivers/meas_airspeed/meas_airspeed.cpp new file mode 100644 index 000000000..7a2e22c01 --- /dev/null +++ b/src/drivers/meas_airspeed/meas_airspeed.cpp @@ -0,0 +1,506 @@ +/**************************************************************************** + * + * Copyright (C) 2013 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file meas_airspeed.cpp + * @author Lorenz Meier + * @author Simon Wilks + * + * Driver for the MEAS Spec series connected via I2C. + * + * Supported sensors: + * + * - MS4525DO (http://www.meas-spec.com/downloads/MS4525DO.pdf) + * - untested: MS5525DSO (http://www.meas-spec.com/downloads/MS5525DSO.pdf) + * + * Interface application notes: + * + * - Interfacing to MEAS Digital Pressure Modules (http://www.meas-spec.com/downloads/Interfacing_to_MEAS_Digital_Pressure_Modules.pdf) + */ + +#include <nuttx/config.h> + +#include <drivers/device/i2c.h> + +#include <sys/types.h> +#include <stdint.h> +#include <stdlib.h> +#include <stdbool.h> +#include <semaphore.h> +#include <string.h> +#include <fcntl.h> +#include <poll.h> +#include <errno.h> +#include <stdio.h> +#include <math.h> +#include <unistd.h> + +#include <nuttx/arch.h> +#include <nuttx/wqueue.h> +#include <nuttx/clock.h> + +#include <arch/board/board.h> + +#include <systemlib/airspeed.h> +#include <systemlib/err.h> +#include <systemlib/param/param.h> +#include <systemlib/perf_counter.h> + +#include <drivers/drv_airspeed.h> +#include <drivers/drv_hrt.h> + +#include <uORB/uORB.h> +#include <uORB/topics/differential_pressure.h> +#include <uORB/topics/subsystem_info.h> + +#include <drivers/airspeed/airspeed.h> + +/* I2C bus address is 1010001x */ +#define I2C_ADDRESS_MS4525DO 0x28 //0x51 /* 7-bit address. */ +/* The MS5525DSO address is 111011Cx, where C is the complementary value of the pin CSB */ +#define I2C_ADDRESS_MS5525DSO 0x77 //0x77/* 7-bit address, addr. pin pulled low */ + +/* Register address */ +#define ADDR_READ_MR 0x00 /* write to this address to start conversion */ +#define ADDR_READ_DF2 0x00 /* read from this address to read pressure only */ +#define ADDR_READ_DF3 0x01 +#define ADDR_READ_DF4 0x02 /* read from this address to read pressure and temp */ + +/* Measurement rate is 100Hz */ +#define CONVERSION_INTERVAL (1000000 / 100) /* microseconds */ + +class MEASAirspeed : public Airspeed +{ +public: + MEASAirspeed(int bus, int address = I2C_ADDRESS_MS4525DO); + +protected: + + /** + * Perform a poll cycle; collect from the previous measurement + * and start a new one. + */ + virtual void cycle(); + virtual int measure(); + virtual int collect(); + +}; + +/* + * Driver 'main' command. + */ +extern "C" __EXPORT int meas_airspeed_main(int argc, char *argv[]); + +MEASAirspeed::MEASAirspeed(int bus, int address) : Airspeed(bus, address, + CONVERSION_INTERVAL) +{ + +} + +int +MEASAirspeed::measure() +{ + int ret; + + /* + * Send the command to begin a measurement. + */ + uint8_t cmd = 0; + ret = transfer(&cmd, 1, nullptr, 0); + + if (OK != ret) { + perf_count(_comms_errors); + log("i2c::transfer returned %d", ret); + return ret; + } + + ret = OK; + + return ret; +} + +int +MEASAirspeed::collect() +{ + int ret = -EIO; + + /* read from the sensor */ + uint8_t val[4] = {0, 0, 0, 0}; + + + perf_begin(_sample_perf); + + ret = transfer(nullptr, 0, &val[0], 2); + + if (ret < 0) { + log("error reading from sensor: %d", ret); + return ret; + } + + uint8_t status = val[0] & 0xC0; + + if (status == 2) { + log("err: stale data"); + } else if (status == 3) { + log("err: fault"); + } + + uint16_t diff_pres_pa = (val[1]) | ((val[0] & ~(0xC0)) << 8); + uint16_t temp = (val[3] & 0xE0) << 8 | val[2]; + + diff_pres_pa = abs(diff_pres_pa - (16384 / 2.0f)); + diff_pres_pa -= _diff_pres_offset; + + // XXX we may want to smooth out the readings to remove noise. + + _reports[_next_report].timestamp = hrt_absolute_time(); + _reports[_next_report].temperature = temp; + _reports[_next_report].differential_pressure_pa = diff_pres_pa; + + // Track maximum differential pressure measured (so we can work out top speed). + if (diff_pres_pa > _reports[_next_report].max_differential_pressure_pa) { + _reports[_next_report].max_differential_pressure_pa = diff_pres_pa; + } + + /* announce the airspeed if needed, just publish else */ + orb_publish(ORB_ID(differential_pressure), _airspeed_pub, &_reports[_next_report]); + + /* post a report to the ring - note, not locked */ + INCREMENT(_next_report, _num_reports); + + /* if we are running up against the oldest report, toss it */ + if (_next_report == _oldest_report) { + perf_count(_buffer_overflows); + INCREMENT(_oldest_report, _num_reports); + } + + /* notify anyone waiting for data */ + poll_notify(POLLIN); + + ret = OK; + + perf_end(_sample_perf); + + return ret; +} + +void +MEASAirspeed::cycle() +{ + /* collection phase? */ + if (_collect_phase) { + + /* perform collection */ + if (OK != collect()) { + log("collection error"); + /* restart the measurement state machine */ + start(); + return; + } + + /* next phase is measurement */ + _collect_phase = false; + + /* + * Is there a collect->measure gap? + */ + if (_measure_ticks > USEC2TICK(CONVERSION_INTERVAL)) { + + /* schedule a fresh cycle call when we are ready to measure again */ + work_queue(HPWORK, + &_work, + (worker_t)&Airspeed::cycle_trampoline, + this, + _measure_ticks - USEC2TICK(CONVERSION_INTERVAL)); + + return; + } + } + + /* measurement phase */ + if (OK != measure()) + log("measure error"); + + /* next phase is collection */ + _collect_phase = true; + + /* schedule a fresh cycle call when the measurement is done */ + work_queue(HPWORK, + &_work, + (worker_t)&Airspeed::cycle_trampoline, + this, + USEC2TICK(CONVERSION_INTERVAL)); +} + +/** + * Local functions in support of the shell command. + */ +namespace meas_airspeed +{ + +/* oddly, ERROR is not defined for c++ */ +#ifdef ERROR +# undef ERROR +#endif +const int ERROR = -1; + +MEASAirspeed *g_dev = nullptr; + +void start(int i2c_bus); +void stop(); +void test(); +void reset(); +void info(); + +/** + * Start the driver. + */ +void +start(int i2c_bus) +{ + int fd; + + if (g_dev != nullptr) + errx(1, "already started"); + + /* create the driver, try the MS4525DO first */ + g_dev = new MEASAirspeed(i2c_bus, I2C_ADDRESS_MS4525DO); + + /* check if the MS4525DO was instantiated */ + if (g_dev == nullptr) + goto fail; + + /* try the MS5525DSO next if init fails */ + if (OK != g_dev->Airspeed::init()) { + delete g_dev; + g_dev = new MEASAirspeed(i2c_bus, I2C_ADDRESS_MS5525DSO); + + /* check if the MS5525DSO was instantiated */ + if (g_dev == nullptr) + goto fail; + + /* both versions failed if the init for the MS5525DSO fails, give up */ + if (OK != g_dev->Airspeed::init()) + goto fail; + } + + /* set the poll rate to default, starts automatic data collection */ + fd = open(AIRSPEED_DEVICE_PATH, O_RDONLY); + + if (fd < 0) + goto fail; + + if (ioctl(fd, SENSORIOCSPOLLRATE, SENSOR_POLLRATE_DEFAULT) < 0) + goto fail; + + exit(0); + +fail: + + if (g_dev != nullptr) { + delete g_dev; + g_dev = nullptr; + } + + errx(1, "driver start failed"); +} + +/** + * Stop the driver + */ +void +stop() +{ + if (g_dev != nullptr) { + delete g_dev; + g_dev = nullptr; + + } else { + errx(1, "driver not running"); + } + + exit(0); +} + +/** + * Perform some basic functional tests on the driver; + * make sure we can collect data from the sensor in polled + * and automatic modes. + */ +void +test() +{ + struct differential_pressure_s report; + ssize_t sz; + int ret; + + int fd = open(AIRSPEED_DEVICE_PATH, O_RDONLY); + + if (fd < 0) + err(1, "%s open failed (try 'meas_airspeed start' if the driver is not running", AIRSPEED_DEVICE_PATH); + + /* do a simple demand read */ + sz = read(fd, &report, sizeof(report)); + + if (sz != sizeof(report)) + err(1, "immediate read failed"); + + warnx("single read"); + warnx("diff pressure: %d pa", report.differential_pressure_pa); + + /* start the sensor polling at 2Hz */ + if (OK != ioctl(fd, SENSORIOCSPOLLRATE, 2)) + errx(1, "failed to set 2Hz poll rate"); + + /* read the sensor 5x and report each value */ + for (unsigned i = 0; i < 5; i++) { + struct pollfd fds; + + /* wait for data to be ready */ + fds.fd = fd; + fds.events = POLLIN; + ret = poll(&fds, 1, 2000); + + if (ret != 1) + errx(1, "timed out waiting for sensor data"); + + /* now go get it */ + sz = read(fd, &report, sizeof(report)); + + if (sz != sizeof(report)) + err(1, "periodic read failed"); + + warnx("periodic read %u", i); + warnx("diff pressure: %d pa", report.differential_pressure_pa); + warnx("temperature: %d C (0x%02x)", (int)report.temperature, (unsigned) report.temperature); + } + + errx(0, "PASS"); +} + +/** + * Reset the driver. + */ +void +reset() +{ + int fd = open(AIRSPEED_DEVICE_PATH, O_RDONLY); + + if (fd < 0) + err(1, "failed "); + + if (ioctl(fd, SENSORIOCRESET, 0) < 0) + err(1, "driver reset failed"); + + if (ioctl(fd, SENSORIOCSPOLLRATE, SENSOR_POLLRATE_DEFAULT) < 0) + err(1, "driver poll restart failed"); + + exit(0); +} + +/** + * Print a little info about the driver. + */ +void +info() +{ + if (g_dev == nullptr) + errx(1, "driver not running"); + + printf("state @ %p\n", g_dev); + g_dev->print_info(); + + exit(0); +} + +} // namespace + + +static void +meas_airspeed_usage() +{ + warnx("usage: meas_airspeed command [options]"); + warnx("options:"); + warnx("\t-b --bus i2cbus (%d)", PX4_I2C_BUS_DEFAULT); + warnx("command:"); + warnx("\tstart|stop|reset|test|info"); +} + +int +meas_airspeed_main(int argc, char *argv[]) +{ + int i2c_bus = PX4_I2C_BUS_DEFAULT; + + int i; + + for (i = 1; i < argc; i++) { + if (strcmp(argv[i], "-b") == 0 || strcmp(argv[i], "--bus") == 0) { + if (argc > i + 1) { + i2c_bus = atoi(argv[i + 1]); + } + } + } + + /* + * Start/load the driver. + */ + if (!strcmp(argv[1], "start")) + meas_airspeed::start(i2c_bus); + + /* + * Stop the driver + */ + if (!strcmp(argv[1], "stop")) + meas_airspeed::stop(); + + /* + * Test the driver/device. + */ + if (!strcmp(argv[1], "test")) + meas_airspeed::test(); + + /* + * Reset the driver. + */ + if (!strcmp(argv[1], "reset")) + meas_airspeed::reset(); + + /* + * Print driver information. + */ + if (!strcmp(argv[1], "info") || !strcmp(argv[1], "status")) + meas_airspeed::info(); + + meas_airspeed_usage(); + exit(0); +} diff --git a/src/drivers/meas_airspeed/module.mk b/src/drivers/meas_airspeed/module.mk new file mode 100644 index 000000000..fed4078b6 --- /dev/null +++ b/src/drivers/meas_airspeed/module.mk @@ -0,0 +1,41 @@ +############################################################################ +# +# Copyright (c) 2013 PX4 Development Team. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name PX4 nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +# +# Makefile to build the MEAS Spec airspeed sensor driver. +# + +MODULE_COMMAND = meas_airspeed +MODULE_STACKSIZE = 2048 + +SRCS = meas_airspeed.cpp diff --git a/src/drivers/mpu6000/mpu6000.cpp b/src/drivers/mpu6000/mpu6000.cpp index 8d9054a38..1fd6cb17e 100644 --- a/src/drivers/mpu6000/mpu6000.cpp +++ b/src/drivers/mpu6000/mpu6000.cpp @@ -1,6 +1,6 @@ /**************************************************************************** * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -35,6 +35,9 @@ * @file mpu6000.cpp * * Driver for the Invensense MPU6000 connected via SPI. + * + * @author Andrew Tridgell + * @author Pat Hickey */ #include <nuttx/config.h> @@ -191,6 +194,7 @@ private: orb_advert_t _gyro_topic; unsigned _reads; + unsigned _sample_rate; perf_counter_t _sample_perf; /** @@ -314,6 +318,7 @@ MPU6000::MPU6000(int bus, spi_dev_e device) : _gyro_range_rad_s(0.0f), _gyro_topic(-1), _reads(0), + _sample_rate(500), _sample_perf(perf_alloc(PC_ELAPSED, "mpu6000_read")) { // disable debug() calls @@ -366,10 +371,6 @@ MPU6000::init() return ret; } - /* advertise sensor topics */ - _accel_topic = orb_advertise(ORB_ID(sensor_accel), &_accel_report); - _gyro_topic = orb_advertise(ORB_ID(sensor_gyro), &_gyro_report); - // Chip reset write_reg(MPUREG_PWR_MGMT_1, BIT_H_RESET); up_udelay(10000); @@ -384,7 +385,7 @@ MPU6000::init() // SAMPLE RATE //write_reg(MPUREG_SMPLRT_DIV, 0x04); // Sample rate = 200Hz Fsample= 1Khz/(4+1) = 200Hz - _set_sample_rate(200); // default sample rate = 200Hz + _set_sample_rate(_sample_rate); // default sample rate = 200Hz usleep(1000); // FS & DLPF FS=2000 deg/s, DLPF = 20Hz (low pass filter) @@ -463,10 +464,18 @@ MPU6000::init() /* do CDev init for the gyro device node, keep it optional */ int gyro_ret = _gyro->init(); + /* ensure we got real values to share */ + measure(); + if (gyro_ret != OK) { _gyro_topic = -1; + } else { + _gyro_topic = orb_advertise(ORB_ID(sensor_gyro), &_gyro_report); } + /* advertise sensor topics */ + _accel_topic = orb_advertise(ORB_ID(sensor_accel), &_accel_report); + return ret; } @@ -509,6 +518,7 @@ MPU6000::_set_sample_rate(uint16_t desired_sample_rate_hz) if(div>200) div=200; if(div<1) div=1; write_reg(MPUREG_SMPLRT_DIV, div-1); + _sample_rate = 1000 / div; } /* @@ -660,8 +670,10 @@ MPU6000::ioctl(struct file *filp, int cmd, unsigned long arg) return -EINVAL; - case ACCELIOCSSAMPLERATE: case ACCELIOCGSAMPLERATE: + return _sample_rate; + + case ACCELIOCSSAMPLERATE: _set_sample_rate(arg); return OK; @@ -689,12 +701,13 @@ MPU6000::ioctl(struct file *filp, int cmd, unsigned long arg) return OK; case ACCELIOCSRANGE: - case ACCELIOCGRANGE: /* XXX not implemented */ // XXX change these two values on set: // _accel_range_scale = (9.81f / 4096.0f); - // _accel_range_rad_s = 8.0f * 9.81f; + // _accel_range_m_s2 = 8.0f * 9.81f; return -EINVAL; + case ACCELIOCGRANGE: + return _accel_range_m_s2; case ACCELIOCSELFTEST: return self_test(); @@ -718,10 +731,12 @@ MPU6000::gyro_ioctl(struct file *filp, int cmd, unsigned long arg) case SENSORIOCRESET: return ioctl(filp, cmd, arg); - case GYROIOCSSAMPLERATE: case GYROIOCGSAMPLERATE: - _set_sample_rate(arg); - return OK; + return _sample_rate; + + case GYROIOCSSAMPLERATE: + _set_sample_rate(arg); + return OK; case GYROIOCSLOWPASS: case GYROIOCGLOWPASS: @@ -739,12 +754,13 @@ MPU6000::gyro_ioctl(struct file *filp, int cmd, unsigned long arg) return OK; case GYROIOCSRANGE: - case GYROIOCGRANGE: /* XXX not implemented */ // XXX change these two values on set: // _gyro_range_scale = xx - // _gyro_range_m_s2 = xx + // _gyro_range_rad_s = xx return -EINVAL; + case GYROIOCGRANGE: + return _gyro_range_rad_s; case GYROIOCSELFTEST: return self_test(); |