diff options
author | Lorenz Meier <lm@inf.ethz.ch> | 2013-04-28 01:17:12 +0200 |
---|---|---|
committer | Lorenz Meier <lm@inf.ethz.ch> | 2013-04-28 01:30:14 +0200 |
commit | f57439b90e23de260259dec051d3e2ead2d61c8c (patch) | |
tree | 5cd778d2cf0c9afb2851ab9042bbecc5b742a497 /src/modules/px4iofirmware/i2c.c | |
parent | 8040b9b96e8f7c07aa981150c33f850096062f70 (diff) | |
download | px4-firmware-f57439b90e23de260259dec051d3e2ead2d61c8c.tar.gz px4-firmware-f57439b90e23de260259dec051d3e2ead2d61c8c.tar.bz2 px4-firmware-f57439b90e23de260259dec051d3e2ead2d61c8c.zip |
Moved all drivers to new world, PX4IO completely in new world
Diffstat (limited to 'src/modules/px4iofirmware/i2c.c')
-rw-r--r-- | src/modules/px4iofirmware/i2c.c | 340 |
1 files changed, 340 insertions, 0 deletions
diff --git a/src/modules/px4iofirmware/i2c.c b/src/modules/px4iofirmware/i2c.c new file mode 100644 index 000000000..4485daa5b --- /dev/null +++ b/src/modules/px4iofirmware/i2c.c @@ -0,0 +1,340 @@ +/**************************************************************************** + * + * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file i2c.c + * + * I2C communication for the PX4IO module. + */ + +#include <stdint.h> + +#include <nuttx/arch.h> +#include <arch/board/board.h> +#include <stm32_i2c.h> +#include <stm32_dma.h> + +//#define DEBUG +#include "px4io.h" + +/* + * I2C register definitions. + */ +#define I2C_BASE STM32_I2C1_BASE + +#define REG(_reg) (*(volatile uint32_t *)(I2C_BASE + _reg)) + +#define rCR1 REG(STM32_I2C_CR1_OFFSET) +#define rCR2 REG(STM32_I2C_CR2_OFFSET) +#define rOAR1 REG(STM32_I2C_OAR1_OFFSET) +#define rOAR2 REG(STM32_I2C_OAR2_OFFSET) +#define rDR REG(STM32_I2C_DR_OFFSET) +#define rSR1 REG(STM32_I2C_SR1_OFFSET) +#define rSR2 REG(STM32_I2C_SR2_OFFSET) +#define rCCR REG(STM32_I2C_CCR_OFFSET) +#define rTRISE REG(STM32_I2C_TRISE_OFFSET) + +static int i2c_interrupt(int irq, void *context); +static void i2c_rx_setup(void); +static void i2c_tx_setup(void); +static void i2c_rx_complete(void); +static void i2c_tx_complete(void); + +static DMA_HANDLE rx_dma; +static DMA_HANDLE tx_dma; + +static uint8_t rx_buf[68]; +static unsigned rx_len; + +static const uint8_t junk_buf[] = { 0xff, 0xff, 0xff, 0xff }; + +static const uint8_t *tx_buf = junk_buf; +static unsigned tx_len = sizeof(junk_buf); +unsigned tx_count; + +static uint8_t selected_page; +static uint8_t selected_offset; + +enum { + DIR_NONE = 0, + DIR_TX = 1, + DIR_RX = 2 +} direction; + +void +i2c_init(void) +{ + debug("i2c init"); + + /* allocate DMA handles and initialise DMA */ + rx_dma = stm32_dmachannel(DMACHAN_I2C1_RX); + i2c_rx_setup(); + tx_dma = stm32_dmachannel(DMACHAN_I2C1_TX); + i2c_tx_setup(); + + /* enable the i2c block clock and reset it */ + modifyreg32(STM32_RCC_APB1ENR, 0, RCC_APB1ENR_I2C1EN); + modifyreg32(STM32_RCC_APB1RSTR, 0, RCC_APB1RSTR_I2C1RST); + modifyreg32(STM32_RCC_APB1RSTR, RCC_APB1RSTR_I2C1RST, 0); + + /* configure the i2c GPIOs */ + stm32_configgpio(GPIO_I2C1_SCL); + stm32_configgpio(GPIO_I2C1_SDA); + + /* soft-reset the block */ + rCR1 |= I2C_CR1_SWRST; + rCR1 = 0; + + /* set for DMA operation */ + rCR2 |= I2C_CR2_ITEVFEN |I2C_CR2_ITERREN | I2C_CR2_DMAEN; + + /* set the frequency value in CR2 */ + rCR2 &= ~I2C_CR2_FREQ_MASK; + rCR2 |= STM32_PCLK1_FREQUENCY / 1000000; + + /* set divisor and risetime for fast mode */ + uint16_t result = STM32_PCLK1_FREQUENCY / (400000 * 25); + if (result < 1) + result = 1; + result = 3; + rCCR &= ~I2C_CCR_CCR_MASK; + rCCR |= I2C_CCR_DUTY | I2C_CCR_FS | result; + rTRISE = (uint16_t)((((STM32_PCLK1_FREQUENCY / 1000000) * 300) / 1000) + 1); + + /* set our device address */ + rOAR1 = 0x1a << 1; + + /* enable event interrupts */ + irq_attach(STM32_IRQ_I2C1EV, i2c_interrupt); + irq_attach(STM32_IRQ_I2C1ER, i2c_interrupt); + up_enable_irq(STM32_IRQ_I2C1EV); + up_enable_irq(STM32_IRQ_I2C1ER); + + /* and enable the I2C port */ + rCR1 |= I2C_CR1_ACK | I2C_CR1_PE; + +#ifdef DEBUG + i2c_dump(); +#endif +} + + +/* + reset the I2C bus + used to recover from lockups + */ +void i2c_reset(void) +{ + rCR1 |= I2C_CR1_SWRST; + rCR1 = 0; + + /* set for DMA operation */ + rCR2 |= I2C_CR2_ITEVFEN |I2C_CR2_ITERREN | I2C_CR2_DMAEN; + + /* set the frequency value in CR2 */ + rCR2 &= ~I2C_CR2_FREQ_MASK; + rCR2 |= STM32_PCLK1_FREQUENCY / 1000000; + + /* set divisor and risetime for fast mode */ + uint16_t result = STM32_PCLK1_FREQUENCY / (400000 * 25); + if (result < 1) + result = 1; + result = 3; + rCCR &= ~I2C_CCR_CCR_MASK; + rCCR |= I2C_CCR_DUTY | I2C_CCR_FS | result; + rTRISE = (uint16_t)((((STM32_PCLK1_FREQUENCY / 1000000) * 300) / 1000) + 1); + + /* set our device address */ + rOAR1 = 0x1a << 1; + + /* and enable the I2C port */ + rCR1 |= I2C_CR1_ACK | I2C_CR1_PE; +} + +static int +i2c_interrupt(int irq, FAR void *context) +{ + uint16_t sr1 = rSR1; + + if (sr1 & (I2C_SR1_STOPF | I2C_SR1_AF | I2C_SR1_ADDR)) { + + if (sr1 & I2C_SR1_STOPF) { + /* write to CR1 to clear STOPF */ + (void)rSR1; /* as recommended, re-read SR1 */ + rCR1 |= I2C_CR1_PE; + } + + /* DMA never stops, so we should do that now */ + switch (direction) { + case DIR_TX: + i2c_tx_complete(); + break; + case DIR_RX: + i2c_rx_complete(); + break; + default: + /* not currently transferring - must be a new txn */ + break; + } + direction = DIR_NONE; + } + + if (sr1 & I2C_SR1_ADDR) { + + /* clear ADDR to ack our selection and get direction */ + (void)rSR1; /* as recommended, re-read SR1 */ + uint16_t sr2 = rSR2; + + if (sr2 & I2C_SR2_TRA) { + /* we are the transmitter */ + + direction = DIR_TX; + + } else { + /* we are the receiver */ + + direction = DIR_RX; + } + } + + /* clear any errors that might need it (this handles AF as well */ + if (sr1 & I2C_SR1_ERRORMASK) + rSR1 = 0; + + return 0; +} + +static void +i2c_rx_setup(void) +{ + /* + * Note that we configure DMA in circular mode; this means that a too-long + * transfer will overwrite the buffer, but that avoids us having to deal with + * bailing out of a transaction while the master is still babbling at us. + */ + rx_len = 0; + stm32_dmasetup(rx_dma, (uintptr_t)&rDR, (uintptr_t)&rx_buf[0], sizeof(rx_buf), + DMA_CCR_CIRC | + DMA_CCR_MINC | + DMA_CCR_PSIZE_32BITS | + DMA_CCR_MSIZE_8BITS | + DMA_CCR_PRIMED); + + stm32_dmastart(rx_dma, NULL, NULL, false); +} + +static void +i2c_rx_complete(void) +{ + rx_len = sizeof(rx_buf) - stm32_dmaresidual(rx_dma); + stm32_dmastop(rx_dma); + + if (rx_len >= 2) { + selected_page = rx_buf[0]; + selected_offset = rx_buf[1]; + + /* work out how many registers are being written */ + unsigned count = (rx_len - 2) / 2; + if (count > 0) { + registers_set(selected_page, selected_offset, (const uint16_t *)&rx_buf[2], count); + } else { + /* no registers written, must be an address cycle */ + uint16_t *regs; + unsigned reg_count; + + /* work out which registers are being addressed */ + int ret = registers_get(selected_page, selected_offset, ®s, ®_count); + if (ret == 0) { + tx_buf = (uint8_t *)regs; + tx_len = reg_count * 2; + } else { + tx_buf = junk_buf; + tx_len = sizeof(junk_buf); + } + + /* disable interrupts while reconfiguring DMA for the selected registers */ + irqstate_t flags = irqsave(); + + stm32_dmastop(tx_dma); + i2c_tx_setup(); + + irqrestore(flags); + } + } + + /* prepare for the next transaction */ + i2c_rx_setup(); +} + +static void +i2c_tx_setup(void) +{ + /* + * Note that we configure DMA in circular mode; this means that a too-long + * transfer will copy the buffer more than once, but that avoids us having + * to deal with bailing out of a transaction while the master is still + * babbling at us. + */ + stm32_dmasetup(tx_dma, (uintptr_t)&rDR, (uintptr_t)&tx_buf[0], tx_len, + DMA_CCR_DIR | + DMA_CCR_CIRC | + DMA_CCR_MINC | + DMA_CCR_PSIZE_8BITS | + DMA_CCR_MSIZE_8BITS | + DMA_CCR_PRIMED); + + stm32_dmastart(tx_dma, NULL, NULL, false); +} + +static void +i2c_tx_complete(void) +{ + tx_count = tx_len - stm32_dmaresidual(tx_dma); + stm32_dmastop(tx_dma); + + /* for debug purposes, save the length of the last transmit as seen by the DMA */ + + /* leave tx_buf/tx_len alone, so that a retry will see the same data */ + + /* prepare for the next transaction */ + i2c_tx_setup(); +} + +void +i2c_dump(void) +{ + debug("CR1 0x%08x CR2 0x%08x", rCR1, rCR2); + debug("OAR1 0x%08x OAR2 0x%08x", rOAR1, rOAR2); + debug("CCR 0x%08x TRISE 0x%08x", rCCR, rTRISE); + debug("SR1 0x%08x SR2 0x%08x", rSR1, rSR2); +} |