diff options
| author | Lorenz Meier <lm@inf.ethz.ch> | 2014-01-26 00:17:26 +0100 |
|---|---|---|
| committer | Lorenz Meier <lm@inf.ethz.ch> | 2014-01-26 00:17:26 +0100 |
| commit | 57d38bc8cec1362308f632e74e99485f82a35501 (patch) | |
| tree | b1c05a1211f551c01f22462bb2471baa29941615 /src/modules/px4iofirmware/protocol.h | |
| parent | eee2508644ea1ca3b267ed89db6d0deb8fe0d3e1 (diff) | |
| download | px4-firmware-57d38bc8cec1362308f632e74e99485f82a35501.tar.gz px4-firmware-57d38bc8cec1362308f632e74e99485f82a35501.tar.bz2 px4-firmware-57d38bc8cec1362308f632e74e99485f82a35501.zip | |
Clean up RC related metadata, put everything into the RC data page. This ensures atomic reads, makes the reads more efficient and allows for some headroom for more RC flags. The IO driver side is updated as well, however, these flags are not published yet.
Diffstat (limited to 'src/modules/px4iofirmware/protocol.h')
| -rw-r--r-- | src/modules/px4iofirmware/protocol.h | 14 |
1 files changed, 10 insertions, 4 deletions
diff --git a/src/modules/px4iofirmware/protocol.h b/src/modules/px4iofirmware/protocol.h index e5bef6eb3..738dc7d6e 100644 --- a/src/modules/px4iofirmware/protocol.h +++ b/src/modules/px4iofirmware/protocol.h @@ -111,7 +111,6 @@ #define PX4IO_P_STATUS_FLAGS_INIT_OK (1 << 10) /* initialisation of the IO completed without error */ #define PX4IO_P_STATUS_FLAGS_FAILSAFE (1 << 11) /* failsafe is active */ #define PX4IO_P_STATUS_FLAGS_SAFETY_OFF (1 << 12) /* safety is off */ -#define PX4IO_P_STATUS_FLAGS_RC_DSM11 (1 << 13) /* DSM input is 11 bit data */ #define PX4IO_P_STATUS_ALARMS 3 /* alarm flags - alarms latch, write 1 to a bit to clear it */ #define PX4IO_P_STATUS_ALARMS_VBATT_LOW (1 << 0) /* [1] VBatt is very close to regulator dropout */ @@ -128,8 +127,6 @@ #define PX4IO_P_STATUS_VSERVO 6 /* [2] servo rail voltage in mV */ #define PX4IO_P_STATUS_VRSSI 7 /* [2] RSSI voltage */ #define PX4IO_P_STATUS_PRSSI 8 /* [2] RSSI PWM value */ -#define PX4IO_P_STATUS_NRSSI 9 /* [2] Normalized RSSI value, 0: no reception, 255: perfect reception */ -#define PX4IO_P_STATUS_RC_DATA 10 /* [1] + [2] Details about the RC source (PPM frame length, Spektrum protocol type) */ /* array of post-mix actuator outputs, -10000..10000 */ #define PX4IO_PAGE_ACTUATORS 2 /* 0..CONFIG_ACTUATOR_COUNT-1 */ @@ -140,7 +137,16 @@ /* array of raw RC input values, microseconds */ #define PX4IO_PAGE_RAW_RC_INPUT 4 #define PX4IO_P_RAW_RC_COUNT 0 /* number of valid channels */ -#define PX4IO_P_RAW_RC_BASE 1 /* CONFIG_RC_INPUT_COUNT channels from here */ +#define PX4IO_P_RAW_RC_FLAGS 1 /* RC detail status flags */ +#define PX4IO_P_RAW_RC_FLAGS_FRAME_DROP (1 << 0) /* single frame drop */ +#define PX4IO_P_RAW_RC_FLAGS_FAILSAFE (1 << 1) /* receiver is in failsafe mode */ +#define PX4IO_P_RAW_RC_FLAGS_RC_DSM11 (1 << 2) /* DSM decoding is 11 bit mode */ + +#define PX4IO_P_RAW_RC_NRSSI 2 /* [2] Normalized RSSI value, 0: no reception, 255: perfect reception */ +#define PX4IO_P_RAW_RC_DATA 3 /* [1] + [2] Details about the RC source (PPM frame length, Spektrum protocol type) */ +#define PX4IO_P_RAW_FRAME_COUNT 4 /* Number of total received frames (wrapping counter) */ +#define PX4IO_P_RAW_LOST_FRAME_COUNT 5 /* Number of total dropped frames (wrapping counter) */ +#define PX4IO_P_RAW_RC_BASE 6 /* CONFIG_RC_INPUT_COUNT channels from here */ /* array of scaled RC input values, -10000..10000 */ #define PX4IO_PAGE_RC_INPUT 5 |