diff options
author | Anton Babushkin <anton.babushkin@me.com> | 2013-08-15 10:33:45 +0200 |
---|---|---|
committer | Anton Babushkin <anton.babushkin@me.com> | 2013-08-15 10:33:45 +0200 |
commit | 7476b03543f879df5ea29d44be147ff4926f8216 (patch) | |
tree | e1c056fa3e12b2c2c3ae601ae2835ac086b60338 /src/modules/sensors/sensors.cpp | |
parent | 39ae01dd07d53e3509826ae3737fc6a509adec34 (diff) | |
parent | d2f19c7d84030ad6ed1f6c17538fa96864c5dcef (diff) | |
download | px4-firmware-7476b03543f879df5ea29d44be147ff4926f8216.tar.gz px4-firmware-7476b03543f879df5ea29d44be147ff4926f8216.tar.bz2 px4-firmware-7476b03543f879df5ea29d44be147ff4926f8216.zip |
Merge branch 'master' into new_state_machine_drton
Diffstat (limited to 'src/modules/sensors/sensors.cpp')
-rw-r--r-- | src/modules/sensors/sensors.cpp | 156 |
1 files changed, 99 insertions, 57 deletions
diff --git a/src/modules/sensors/sensors.cpp b/src/modules/sensors/sensors.cpp index b38dc8d89..22374a1fe 100644 --- a/src/modules/sensors/sensors.cpp +++ b/src/modules/sensors/sensors.cpp @@ -60,6 +60,7 @@ #include <drivers/drv_baro.h> #include <drivers/drv_rc_input.h> #include <drivers/drv_adc.h> +#include <drivers/drv_airspeed.h> #include <systemlib/systemlib.h> #include <systemlib/param/param.h> @@ -91,8 +92,35 @@ #define BARO_HEALTH_COUNTER_LIMIT_OK 5 #define ADC_HEALTH_COUNTER_LIMIT_OK 5 -#define ADC_BATTERY_VOLTAGE_CHANNEL 10 -#define ADC_AIRSPEED_VOLTAGE_CHANNEL 11 +/** + * Analog layout: + * FMU: + * IN2 - battery voltage + * IN3 - battery current + * IN4 - 5V sense + * IN10 - spare (we could actually trim these from the set) + * IN11 - spare (we could actually trim these from the set) + * IN12 - spare (we could actually trim these from the set) + * IN13 - aux1 + * IN14 - aux2 + * IN15 - pressure sensor + * + * IO: + * IN4 - servo supply rail + * IN5 - analog RSSI + */ + +#ifdef CONFIG_ARCH_BOARD_PX4FMU_V1 + #define ADC_BATTERY_VOLTAGE_CHANNEL 10 + #define ADC_AIRSPEED_VOLTAGE_CHANNEL 11 +#endif + +#ifdef CONFIG_ARCH_BOARD_PX4FMU_V2 + #define ADC_BATTERY_VOLTAGE_CHANNEL 2 + #define ADC_BATTERY_CURRENT_CHANNEL 3 + #define ADC_5V_RAIL_SENSE 4 + #define ADC_AIRSPEED_VOLTAGE_CHANNEL 15 +#endif #define BAT_VOL_INITIAL 0.f #define BAT_VOL_LOWPASS_1 0.99f @@ -197,7 +225,7 @@ private: float mag_scale[3]; float accel_offset[3]; float accel_scale[3]; - int diff_pres_offset_pa; + float diff_pres_offset_pa; int rc_type; @@ -228,7 +256,6 @@ private: float battery_voltage_scaling; - int rc_rl1_DSM_VCC_control; } _parameters; /**< local copies of interesting parameters */ struct { @@ -277,7 +304,6 @@ private: param_t battery_voltage_scaling; - param_t rc_rl1_DSM_VCC_control; } _parameter_handles; /**< handles for interesting parameters */ @@ -389,7 +415,7 @@ namespace sensors #endif static const int ERROR = -1; -Sensors *g_sensors; +Sensors *g_sensors = nullptr; } Sensors::Sensors() : @@ -512,9 +538,6 @@ Sensors::Sensors() : _parameter_handles.battery_voltage_scaling = param_find("BAT_V_SCALING"); - /* DSM VCC relay control */ - _parameter_handles.rc_rl1_DSM_VCC_control = param_find("RC_RL1_DSM_VCC"); - /* fetch initial parameter values */ parameters_update(); } @@ -552,25 +575,11 @@ Sensors::parameters_update() /* rc values */ for (unsigned int i = 0; i < RC_CHANNELS_MAX; i++) { - if (param_get(_parameter_handles.min[i], &(_parameters.min[i])) != OK) { - warnx("Failed getting min for chan %d", i); - } - - if (param_get(_parameter_handles.trim[i], &(_parameters.trim[i])) != OK) { - warnx("Failed getting trim for chan %d", i); - } - - if (param_get(_parameter_handles.max[i], &(_parameters.max[i])) != OK) { - warnx("Failed getting max for chan %d", i); - } - - if (param_get(_parameter_handles.rev[i], &(_parameters.rev[i])) != OK) { - warnx("Failed getting rev for chan %d", i); - } - - if (param_get(_parameter_handles.dz[i], &(_parameters.dz[i])) != OK) { - warnx("Failed getting dead zone for chan %d", i); - } + param_get(_parameter_handles.min[i], &(_parameters.min[i])); + param_get(_parameter_handles.trim[i], &(_parameters.trim[i])); + param_get(_parameter_handles.max[i], &(_parameters.max[i])); + param_get(_parameter_handles.rev[i], &(_parameters.rev[i])); + param_get(_parameter_handles.dz[i], &(_parameters.dz[i])); _parameters.scaling_factor[i] = (1.0f / ((_parameters.max[i] - _parameters.min[i]) / 2.0f) * _parameters.rev[i]); @@ -656,21 +665,10 @@ Sensors::parameters_update() warnx("Failed getting mode aux 5 index"); } - if (param_get(_parameter_handles.rc_scale_roll, &(_parameters.rc_scale_roll)) != OK) { - warnx("Failed getting rc scaling for roll"); - } - - if (param_get(_parameter_handles.rc_scale_pitch, &(_parameters.rc_scale_pitch)) != OK) { - warnx("Failed getting rc scaling for pitch"); - } - - if (param_get(_parameter_handles.rc_scale_yaw, &(_parameters.rc_scale_yaw)) != OK) { - warnx("Failed getting rc scaling for yaw"); - } - - if (param_get(_parameter_handles.rc_scale_flaps, &(_parameters.rc_scale_flaps)) != OK) { - warnx("Failed getting rc scaling for flaps"); - } + param_get(_parameter_handles.rc_scale_roll, &(_parameters.rc_scale_roll)); + param_get(_parameter_handles.rc_scale_pitch, &(_parameters.rc_scale_pitch)); + param_get(_parameter_handles.rc_scale_yaw, &(_parameters.rc_scale_yaw)); + param_get(_parameter_handles.rc_scale_flaps, &(_parameters.rc_scale_flaps)); /* update RC function mappings */ _rc.function[THROTTLE] = _parameters.rc_map_throttle - 1; @@ -726,11 +724,6 @@ Sensors::parameters_update() warnx("Failed updating voltage scaling param"); } - /* relay 1 DSM VCC control */ - if (param_get(_parameter_handles.rc_rl1_DSM_VCC_control, &(_parameters.rc_rl1_DSM_VCC_control)) != OK) { - warnx("Failed updating relay 1 DSM VCC control"); - } - return OK; } @@ -746,11 +739,26 @@ Sensors::accel_init() errx(1, "FATAL: no accelerometer found"); } else { - /* set the accel internal sampling rate up to at leat 500Hz */ - ioctl(fd, ACCELIOCSSAMPLERATE, 500); - /* set the driver to poll at 500Hz */ - ioctl(fd, SENSORIOCSPOLLRATE, 500); + // XXX do the check more elegantly + + #ifdef CONFIG_ARCH_BOARD_PX4FMU_V1 + + /* set the accel internal sampling rate up to at leat 1000Hz */ + ioctl(fd, ACCELIOCSSAMPLERATE, 1000); + + /* set the driver to poll at 1000Hz */ + ioctl(fd, SENSORIOCSPOLLRATE, 1000); + + #else + + /* set the accel internal sampling rate up to at leat 800Hz */ + ioctl(fd, ACCELIOCSSAMPLERATE, 800); + + /* set the driver to poll at 800Hz */ + ioctl(fd, SENSORIOCSPOLLRATE, 800); + + #endif warnx("using system accel"); close(fd); @@ -769,11 +777,28 @@ Sensors::gyro_init() errx(1, "FATAL: no gyro found"); } else { - /* set the gyro internal sampling rate up to at leat 500Hz */ - ioctl(fd, GYROIOCSSAMPLERATE, 500); - /* set the driver to poll at 500Hz */ - ioctl(fd, SENSORIOCSPOLLRATE, 500); + // XXX do the check more elegantly + + #ifdef CONFIG_ARCH_BOARD_PX4FMU_V1 + + /* set the gyro internal sampling rate up to at least 1000Hz */ + if (ioctl(fd, GYROIOCSSAMPLERATE, 1000) != OK) + ioctl(fd, GYROIOCSSAMPLERATE, 800); + + /* set the driver to poll at 1000Hz */ + if (ioctl(fd, SENSORIOCSPOLLRATE, 1000) != OK) + ioctl(fd, SENSORIOCSPOLLRATE, 800); + + #else + + /* set the gyro internal sampling rate up to at leat 800Hz */ + ioctl(fd, GYROIOCSSAMPLERATE, 800); + + /* set the driver to poll at 800Hz */ + ioctl(fd, SENSORIOCSPOLLRATE, 800); + + #endif warnx("using system gyro"); close(fd); @@ -1034,6 +1059,20 @@ Sensors::parameter_update_poll(bool forced) close(fd); + fd = open(AIRSPEED_DEVICE_PATH, 0); + + /* this sensor is optional, abort without error */ + + if (fd > 0) { + struct airspeed_scale airscale = { + _parameters.diff_pres_offset_pa, + 1.0f, + }; + + if (OK != ioctl(fd, AIRSPEEDIOCSSCALE, (long unsigned int)&airscale)) + warn("WARNING: failed to set scale / offsets for airspeed sensor"); + } + #if 0 printf("CH0: RAW MAX: %d MIN %d S: %d MID: %d FUNC: %d\n", (int)_parameters.max[0], (int)_parameters.min[0], (int)(_rc.chan[0].scaling_factor * 10000), (int)(_rc.chan[0].mid), (int)_rc.function[0]); printf("CH1: RAW MAX: %d MIN %d S: %d MID: %d FUNC: %d\n", (int)_parameters.max[1], (int)_parameters.min[1], (int)(_rc.chan[1].scaling_factor * 10000), (int)(_rc.chan[1].mid), (int)_rc.function[1]); @@ -1364,6 +1403,9 @@ Sensors::task_main() /* rate limit vehicle status updates to 5Hz */ orb_set_interval(_vcontrol_mode_sub, 200); + /* rate limit gyro to 250 Hz (the gyro signal is lowpassed accordingly earlier) */ + orb_set_interval(_gyro_sub, 4); + /* * do advertisements */ @@ -1399,7 +1441,7 @@ Sensors::task_main() while (!_task_should_exit) { - /* wait for up to 500ms for data */ + /* wait for up to 100ms for data */ int pret = poll(&fds[0], (sizeof(fds) / sizeof(fds[0])), 100); /* timed out - periodic check for _task_should_exit, etc. */ |