diff options
author | Lorenz Meier <lm@inf.ethz.ch> | 2014-11-02 21:24:50 +0100 |
---|---|---|
committer | Lorenz Meier <lm@inf.ethz.ch> | 2014-11-02 21:24:50 +0100 |
commit | b51c6693445be6ff230b3d34ad400553aadddd7e (patch) | |
tree | 01ac473924dfe8a207c6528b19e9b4a49c00e9ab /src/modules | |
parent | d610564fd007112ed3e66d80fe63014424727f8b (diff) | |
download | px4-firmware-b51c6693445be6ff230b3d34ad400553aadddd7e.tar.gz px4-firmware-b51c6693445be6ff230b3d34ad400553aadddd7e.tar.bz2 px4-firmware-b51c6693445be6ff230b3d34ad400553aadddd7e.zip |
Commander: Improve calibration routines to produce more conscise and better sequenced instructions
Diffstat (limited to 'src/modules')
-rw-r--r-- | src/modules/commander/accelerometer_calibration.cpp | 44 | ||||
-rw-r--r-- | src/modules/commander/airspeed_calibration.cpp | 25 | ||||
-rw-r--r-- | src/modules/commander/gyro_calibration.cpp | 5 | ||||
-rw-r--r-- | src/modules/commander/mag_calibration.cpp | 2 |
4 files changed, 51 insertions, 25 deletions
diff --git a/src/modules/commander/accelerometer_calibration.cpp b/src/modules/commander/accelerometer_calibration.cpp index 7a4e7a766..0cb41489f 100644 --- a/src/modules/commander/accelerometer_calibration.cpp +++ b/src/modules/commander/accelerometer_calibration.cpp @@ -83,7 +83,7 @@ * | accel_T[1][i] | * [ accel_T[2][i] ] * - * b = [ accel_corr_ref[0][i] ] // One measurement per axis is enough + * b = [ accel_corr_ref[0][i] ] // One measurement per side is enough * | accel_corr_ref[2][i] | * [ accel_corr_ref[4][i] ] * @@ -162,6 +162,11 @@ int do_accel_calibration(int mavlink_fd) mavlink_log_info(mavlink_fd, CAL_STARTED_MSG, sensor_name); + mavlink_log_info(mavlink_fd, "You need to put the system on all six sides"); + sleep(3); + mavlink_log_info(mavlink_fd, "Follow the instructions on the screen"); + sleep(5); + struct accel_scale accel_scale = { 0.0f, 1.0f, @@ -258,7 +263,7 @@ int do_accel_calibration_measurements(int mavlink_fd, float accel_offs[3], float const int samples_num = 2500; float accel_ref[6][3]; bool data_collected[6] = { false, false, false, false, false, false }; - const char *orientation_strs[6] = { "x+", "x-", "y+", "y-", "z+", "z-" }; + const char *orientation_strs[6] = { "front", "back", "left", "right", "top", "bottom" }; int sensor_combined_sub = orb_subscribe(ORB_ID(sensor_combined)); @@ -287,29 +292,37 @@ int do_accel_calibration_measurements(int mavlink_fd, float accel_offs[3], float break; } - mavlink_log_info(mavlink_fd, "directions left: %s%s%s%s%s%s", - (!data_collected[0]) ? "x+ " : "", - (!data_collected[1]) ? "x- " : "", - (!data_collected[2]) ? "y+ " : "", - (!data_collected[3]) ? "y- " : "", - (!data_collected[4]) ? "z+ " : "", - (!data_collected[5]) ? "z- " : ""); + /* inform user which axes are still needed */ + mavlink_log_info(mavlink_fd, "pending: %s%s%s%s%s%s", + (!data_collected[0]) ? "front " : "", + (!data_collected[1]) ? "back " : "", + (!data_collected[2]) ? "left " : "", + (!data_collected[3]) ? "right " : "", + (!data_collected[4]) ? "up " : "", + (!data_collected[5]) ? "down " : ""); + + /* allow user enough time to read the message */ + sleep(3); int orient = detect_orientation(mavlink_fd, sensor_combined_sub); if (orient < 0) { - res = ERROR; - break; + mavlink_log_info(mavlink_fd, "invalid motion, hold still..."); + sleep(3); + continue; } + /* inform user about already handled side */ if (data_collected[orient]) { - mavlink_log_info(mavlink_fd, "%s done, rotate to a different axis", orientation_strs[orient]); + mavlink_log_info(mavlink_fd, "%s side done, rotate to a different side", orientation_strs[orient]); + sleep(4); continue; } - mavlink_log_info(mavlink_fd, "accel measurement started: %s axis", orientation_strs[orient]); + mavlink_log_info(mavlink_fd, "Hold still, starting to measure %s side", orientation_strs[orient]); + sleep(1); read_accelerometer_avg(sensor_combined_sub, &(accel_ref[orient][0]), samples_num); - mavlink_log_info(mavlink_fd, "result for %s axis: [ %.2f %.2f %.2f ]", orientation_strs[orient], + mavlink_log_info(mavlink_fd, "result for %s side: [ %.2f %.2f %.2f ]", orientation_strs[orient], (double)accel_ref[orient][0], (double)accel_ref[orient][1], (double)accel_ref[orient][2]); @@ -400,7 +413,7 @@ int detect_orientation(int mavlink_fd, int sub_sensor_combined) /* is still now */ if (t_still == 0) { /* first time */ - mavlink_log_info(mavlink_fd, "detected rest position, waiting..."); + mavlink_log_info(mavlink_fd, "detected rest position, hold still..."); t_still = t; t_timeout = t + timeout; @@ -418,6 +431,7 @@ int detect_orientation(int mavlink_fd, int sub_sensor_combined) /* not still, reset still start time */ if (t_still != 0) { mavlink_log_info(mavlink_fd, "detected motion, hold still..."); + sleep(3); t_still = 0; } } diff --git a/src/modules/commander/airspeed_calibration.cpp b/src/modules/commander/airspeed_calibration.cpp index 339b11bbe..cae1d7684 100644 --- a/src/modules/commander/airspeed_calibration.cpp +++ b/src/modules/commander/airspeed_calibration.cpp @@ -61,6 +61,15 @@ static const int ERROR = -1; static const char *sensor_name = "dpress"; +#define HUMAN_ASPD_CAL_FAILED_MSG "Calibration failed, see http://px4.io/help/aspd" + +static void feedback_calibration_failed(int mavlink_fd) +{ + sleep(5); + mavlink_log_critical(mavlink_fd, CAL_FAILED_MSG, sensor_name); + mavlink_log_critical(mavlink_fd, HUMAN_ASPD_CAL_FAILED_MSG); +} + int do_airspeed_calibration(int mavlink_fd) { /* give directions */ @@ -99,7 +108,7 @@ int do_airspeed_calibration(int mavlink_fd) float analog_scaling = 0.0f; param_get(param_find("SENS_DPRES_ANSC"), &(analog_scaling)); if (fabsf(analog_scaling) < 0.1f) { - mavlink_log_critical(mavlink_fd, "If analog sens, retry with [SENS_DPRES_ANSC=1000]"); + mavlink_log_critical(mavlink_fd, "No airspeed sensor, see http://px4.io/help/aspd"); close(diff_pres_sub); return ERROR; } @@ -138,7 +147,7 @@ int do_airspeed_calibration(int mavlink_fd) } else if (poll_ret == 0) { /* any poll failure for 1s is a reason to abort */ - mavlink_log_critical(mavlink_fd, CAL_FAILED_MSG, sensor_name); + feedback_calibration_failed(mavlink_fd); close(diff_pres_sub); return ERROR; } @@ -175,7 +184,7 @@ int do_airspeed_calibration(int mavlink_fd) } } else { - mavlink_log_info(mavlink_fd, CAL_FAILED_MSG, sensor_name); + feedback_calibration_failed(mavlink_fd); close(diff_pres_sub); return ERROR; } @@ -207,7 +216,7 @@ int do_airspeed_calibration(int mavlink_fd) if (fabsf(diff_pres.differential_pressure_raw_pa) < 50.0f) { if (calibration_counter % 500 == 0) { - mavlink_log_info(mavlink_fd, "Create airflow! (%d, wanted: 50 Pa)", + mavlink_log_info(mavlink_fd, "Create air pressure! (got %d, wanted: 50 Pa)", (int)diff_pres.differential_pressure_raw_pa); } continue; @@ -215,9 +224,9 @@ int do_airspeed_calibration(int mavlink_fd) /* do not allow negative values */ if (diff_pres.differential_pressure_raw_pa < 0.0f) { - mavlink_log_critical(mavlink_fd, "Swap static and dynamic ports!"); mavlink_log_info(mavlink_fd, "ERROR: Negative pressure difference detected! (%d Pa)", (int)diff_pres.differential_pressure_raw_pa); + mavlink_log_critical(mavlink_fd, "Swap static and dynamic ports!"); close(diff_pres_sub); /* the user setup is wrong, wipe the calibration to force a proper re-calibration */ @@ -235,7 +244,7 @@ int do_airspeed_calibration(int mavlink_fd) close(diff_pres_sub); - mavlink_log_info(mavlink_fd, CAL_FAILED_MSG, sensor_name); + feedback_calibration_failed(mavlink_fd); return ERROR; } else { mavlink_log_info(mavlink_fd, "Positive pressure: OK (%d Pa)", @@ -245,14 +254,14 @@ int do_airspeed_calibration(int mavlink_fd) } else if (poll_ret == 0) { /* any poll failure for 1s is a reason to abort */ - mavlink_log_critical(mavlink_fd, CAL_FAILED_MSG, sensor_name); + feedback_calibration_failed(mavlink_fd); close(diff_pres_sub); return ERROR; } } if (calibration_counter == maxcount) { - mavlink_log_critical(mavlink_fd, CAL_FAILED_MSG, sensor_name); + feedback_calibration_failed(mavlink_fd); close(diff_pres_sub); return ERROR; } diff --git a/src/modules/commander/gyro_calibration.cpp b/src/modules/commander/gyro_calibration.cpp index d89c67c2b..8ab14dd52 100644 --- a/src/modules/commander/gyro_calibration.cpp +++ b/src/modules/commander/gyro_calibration.cpp @@ -63,7 +63,10 @@ static const char *sensor_name = "gyro"; int do_gyro_calibration(int mavlink_fd) { mavlink_log_info(mavlink_fd, CAL_STARTED_MSG, sensor_name); - mavlink_log_info(mavlink_fd, "don't move system"); + mavlink_log_info(mavlink_fd, "HOLD STILL"); + + /* wait for the user to respond */ + sleep(2); struct gyro_scale gyro_scale = { 0.0f, diff --git a/src/modules/commander/mag_calibration.cpp b/src/modules/commander/mag_calibration.cpp index 23900f386..7be8de9c6 100644 --- a/src/modules/commander/mag_calibration.cpp +++ b/src/modules/commander/mag_calibration.cpp @@ -155,7 +155,7 @@ int do_mag_calibration(int mavlink_fd) uint64_t calibration_deadline = hrt_absolute_time() + calibration_interval; unsigned poll_errcount = 0; - mavlink_log_info(mavlink_fd, "rotate in a figure 8 around all axis"); + mavlink_log_info(mavlink_fd, "Turn on all sides: front/back,left/right,up/down"); calibration_counter = 0; |