diff options
author | Simon Wilks <sjwilks@gmail.com> | 2013-07-13 01:08:45 +0200 |
---|---|---|
committer | Simon Wilks <sjwilks@gmail.com> | 2013-07-13 01:08:45 +0200 |
commit | 1ccfb623ee934b3a9fd258548c7cd9de66504623 (patch) | |
tree | 0c2946b2408ad71d9e681fa84ab2f89b2f506cf7 /src | |
parent | b500cce31ef4ec3c68a5c98e90e3e6dbe10d6722 (diff) | |
parent | 3b9c306d64acdebddbf9de1d518777f11c066cbe (diff) | |
download | px4-firmware-1ccfb623ee934b3a9fd258548c7cd9de66504623.tar.gz px4-firmware-1ccfb623ee934b3a9fd258548c7cd9de66504623.tar.bz2 px4-firmware-1ccfb623ee934b3a9fd258548c7cd9de66504623.zip |
Merge remote-tracking branch 'upstream/master' into hott-esc
Diffstat (limited to 'src')
26 files changed, 994 insertions, 783 deletions
diff --git a/src/drivers/ardrone_interface/ardrone_motor_control.c b/src/drivers/ardrone_interface/ardrone_motor_control.c index ecd31a073..be8968a4e 100644 --- a/src/drivers/ardrone_interface/ardrone_motor_control.c +++ b/src/drivers/ardrone_interface/ardrone_motor_control.c @@ -109,7 +109,7 @@ int ar_multiplexing_init() { int fd; - fd = open(GPIO_DEVICE_PATH, 0); + fd = open(PX4FMU_DEVICE_PATH, 0); if (fd < 0) { warn("GPIO: open fail"); diff --git a/src/drivers/drv_gpio.h b/src/drivers/drv_gpio.h index 7e3998fca..510983d4b 100644 --- a/src/drivers/drv_gpio.h +++ b/src/drivers/drv_gpio.h @@ -63,43 +63,12 @@ * they also export GPIO-like things. This is always the GPIOs on the * main board. */ -# define GPIO_DEVICE_PATH "/dev/px4fmu" +# define PX4FMU_DEVICE_PATH "/dev/px4fmu" +# define PX4IO_DEVICE_PATH "/dev/px4io" #endif -#ifdef CONFIG_ARCH_BOARD_PX4IO_V1 -/* - * PX4IO GPIO numbers. - * - * XXX note that these are here for reference/future use; currently - * there is no good way to wire these up without a common STM32 GPIO - * driver, which isn't implemented yet. - */ -/* outputs */ -# define GPIO_ACC1_POWER (1<<0) /**< accessory power 1 */ -# define GPIO_ACC2_POWER (1<<1) /**< accessory power 2 */ -# define GPIO_SERVO_POWER (1<<2) /**< servo power */ -# define GPIO_RELAY1 (1<<3) /**< relay 1 */ -# define GPIO_RELAY2 (1<<4) /**< relay 2 */ -# define GPIO_LED_BLUE (1<<5) /**< blue LED */ -# define GPIO_LED_AMBER (1<<6) /**< amber/red LED */ -# define GPIO_LED_SAFETY (1<<7) /**< safety LED */ - -/* inputs */ -# define GPIO_ACC_OVERCURRENT (1<<8) /**< accessory 1/2 overcurrent detect */ -# define GPIO_SERVO_OVERCURRENT (1<<9) /**< servo overcurrent detect */ -# define GPIO_SAFETY_BUTTON (1<<10) /**< safety button pressed */ - -/** - * Default GPIO device - other devices may also support this protocol if - * they also export GPIO-like things. This is always the GPIOs on the - * main board. - */ -# define GPIO_DEVICE_PATH "/dev/px4io" - -#endif - -#ifndef GPIO_DEVICE_PATH +#ifndef PX4IO_DEVICE_PATH # error No GPIO support for this board. #endif diff --git a/src/drivers/drv_pwm_output.h b/src/drivers/drv_pwm_output.h index 56af71059..52a667403 100644 --- a/src/drivers/drv_pwm_output.h +++ b/src/drivers/drv_pwm_output.h @@ -115,6 +115,15 @@ ORB_DECLARE(output_pwm); /** clear the 'ARM ok' bit, which deactivates the safety switch */ #define PWM_SERVO_CLEAR_ARM_OK _IOC(_PWM_SERVO_BASE, 6) +/** start DSM bind */ +#define DSM_BIND_START _IOC(_PWM_SERVO_BASE, 7) + +/** stop DSM bind */ +#define DSM_BIND_STOP _IOC(_PWM_SERVO_BASE, 8) + +/** Power up DSM receiver */ +#define DSM_BIND_POWER_UP _IOC(_PWM_SERVO_BASE, 9) + /** set a single servo to a specific value */ #define PWM_SERVO_SET(_servo) _IOC(_PWM_SERVO_BASE, 0x20 + _servo) diff --git a/src/drivers/gps/ubx.cpp b/src/drivers/gps/ubx.cpp index f2e7ca67d..b579db715 100644 --- a/src/drivers/gps/ubx.cpp +++ b/src/drivers/gps/ubx.cpp @@ -3,6 +3,7 @@ * Copyright (C) 2013 PX4 Development Team. All rights reserved. * Author: Thomas Gubler <thomasgubler@student.ethz.ch> * Julian Oes <joes@student.ethz.ch> + * Anton Babushkin <anton.babushkin@me.com> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -55,13 +56,16 @@ #include "ubx.h" -#define UBX_CONFIG_TIMEOUT 100 +#define UBX_CONFIG_TIMEOUT 200 // ms, timeout for waiting ACK +#define UBX_PACKET_TIMEOUT 2 // ms, if now data during this delay assume that full update received +#define UBX_WAIT_BEFORE_READ 20 // ms, wait before reading to save read() calls UBX::UBX(const int &fd, struct vehicle_gps_position_s *gps_position) : -_fd(fd), -_gps_position(gps_position), -_waiting_for_ack(false), -_disable_cmd_counter(0) + _fd(fd), + _gps_position(gps_position), + _configured(false), + _waiting_for_ack(false), + _disable_cmd_counter(0) { decode_init(); } @@ -73,12 +77,13 @@ UBX::~UBX() int UBX::configure(unsigned &baudrate) { - _waiting_for_ack = true; - + _configured = false; /* try different baudrates */ const unsigned baudrates_to_try[] = {9600, 38400, 19200, 57600, 115200}; - for (int baud_i = 0; baud_i < 5; baud_i++) { + int baud_i; + + for (baud_i = 0; baud_i < 5; baud_i++) { baudrate = baudrates_to_try[baud_i]; set_baudrate(_fd, baudrate); @@ -89,8 +94,8 @@ UBX::configure(unsigned &baudrate) /* Set everything else of the packet to 0, otherwise the module wont accept it */ memset(&cfg_prt_packet, 0, sizeof(cfg_prt_packet)); - _clsID_needed = UBX_CLASS_CFG; - _msgID_needed = UBX_MESSAGE_CFG_PRT; + _message_class_needed = UBX_CLASS_CFG; + _message_id_needed = UBX_MESSAGE_CFG_PRT; /* Define the package contents, don't change the baudrate */ cfg_prt_packet.clsID = UBX_CLASS_CFG; @@ -102,9 +107,9 @@ UBX::configure(unsigned &baudrate) cfg_prt_packet.inProtoMask = UBX_CFG_PRT_PAYLOAD_INPROTOMASK; cfg_prt_packet.outProtoMask = UBX_CFG_PRT_PAYLOAD_OUTPROTOMASK; - send_config_packet(_fd, (uint8_t*)&cfg_prt_packet, sizeof(cfg_prt_packet)); + send_config_packet(_fd, (uint8_t *)&cfg_prt_packet, sizeof(cfg_prt_packet)); - if (receive(UBX_CONFIG_TIMEOUT) < 0) { + if (wait_for_ack(UBX_CONFIG_TIMEOUT) < 0) { /* try next baudrate */ continue; } @@ -120,100 +125,125 @@ UBX::configure(unsigned &baudrate) cfg_prt_packet.inProtoMask = UBX_CFG_PRT_PAYLOAD_INPROTOMASK; cfg_prt_packet.outProtoMask = UBX_CFG_PRT_PAYLOAD_OUTPROTOMASK; - send_config_packet(_fd, (uint8_t*)&cfg_prt_packet, sizeof(cfg_prt_packet)); - + send_config_packet(_fd, (uint8_t *)&cfg_prt_packet, sizeof(cfg_prt_packet)); + /* no ACK is expected here, but read the buffer anyway in case we actually get an ACK */ - receive(UBX_CONFIG_TIMEOUT); - + wait_for_ack(UBX_CONFIG_TIMEOUT); + if (UBX_CFG_PRT_PAYLOAD_BAUDRATE != baudrate) { set_baudrate(_fd, UBX_CFG_PRT_PAYLOAD_BAUDRATE); baudrate = UBX_CFG_PRT_PAYLOAD_BAUDRATE; } - /* send a CFT-RATE message to define update rate */ - type_gps_bin_cfg_rate_packet_t cfg_rate_packet; - memset(&cfg_rate_packet, 0, sizeof(cfg_rate_packet)); + /* at this point we have correct baudrate on both ends */ + break; + } - _clsID_needed = UBX_CLASS_CFG; - _msgID_needed = UBX_MESSAGE_CFG_RATE; + if (baud_i >= 5) { + return 1; + } - cfg_rate_packet.clsID = UBX_CLASS_CFG; - cfg_rate_packet.msgID = UBX_MESSAGE_CFG_RATE; - cfg_rate_packet.length = UBX_CFG_RATE_LENGTH; - cfg_rate_packet.measRate = UBX_CFG_RATE_PAYLOAD_MEASINTERVAL; - cfg_rate_packet.navRate = UBX_CFG_RATE_PAYLOAD_NAVRATE; - cfg_rate_packet.timeRef = UBX_CFG_RATE_PAYLOAD_TIMEREF; + /* send a CFG-RATE message to define update rate */ + type_gps_bin_cfg_rate_packet_t cfg_rate_packet; + memset(&cfg_rate_packet, 0, sizeof(cfg_rate_packet)); - send_config_packet(_fd, (uint8_t*)&cfg_rate_packet, sizeof(cfg_rate_packet)); - if (wait_for_ack(UBX_CONFIG_TIMEOUT) < 0) { - /* try next baudrate */ - continue; - } + _message_class_needed = UBX_CLASS_CFG; + _message_id_needed = UBX_MESSAGE_CFG_RATE; - /* send a NAV5 message to set the options for the internal filter */ - type_gps_bin_cfg_nav5_packet_t cfg_nav5_packet; - memset(&cfg_nav5_packet, 0, sizeof(cfg_nav5_packet)); + cfg_rate_packet.clsID = UBX_CLASS_CFG; + cfg_rate_packet.msgID = UBX_MESSAGE_CFG_RATE; + cfg_rate_packet.length = UBX_CFG_RATE_LENGTH; + cfg_rate_packet.measRate = UBX_CFG_RATE_PAYLOAD_MEASINTERVAL; + cfg_rate_packet.navRate = UBX_CFG_RATE_PAYLOAD_NAVRATE; + cfg_rate_packet.timeRef = UBX_CFG_RATE_PAYLOAD_TIMEREF; - _clsID_needed = UBX_CLASS_CFG; - _msgID_needed = UBX_MESSAGE_CFG_NAV5; + send_config_packet(_fd, (uint8_t *)&cfg_rate_packet, sizeof(cfg_rate_packet)); - cfg_nav5_packet.clsID = UBX_CLASS_CFG; - cfg_nav5_packet.msgID = UBX_MESSAGE_CFG_NAV5; - cfg_nav5_packet.length = UBX_CFG_NAV5_LENGTH; - cfg_nav5_packet.mask = UBX_CFG_NAV5_PAYLOAD_MASK; - cfg_nav5_packet.dynModel = UBX_CFG_NAV5_PAYLOAD_DYNMODEL; - cfg_nav5_packet.fixMode = UBX_CFG_NAV5_PAYLOAD_FIXMODE; + if (wait_for_ack(UBX_CONFIG_TIMEOUT) < 0) { + warnx("ubx: configuration failed: RATE"); + return 1; + } - send_config_packet(_fd, (uint8_t*)&cfg_nav5_packet, sizeof(cfg_nav5_packet)); - if (wait_for_ack(UBX_CONFIG_TIMEOUT) < 0) { - /* try next baudrate */ - continue; - } + /* send a NAV5 message to set the options for the internal filter */ + type_gps_bin_cfg_nav5_packet_t cfg_nav5_packet; + memset(&cfg_nav5_packet, 0, sizeof(cfg_nav5_packet)); + + _message_class_needed = UBX_CLASS_CFG; + _message_id_needed = UBX_MESSAGE_CFG_NAV5; - configure_message_rate(UBX_CLASS_NAV, UBX_MESSAGE_NAV_POSLLH, - UBX_CFG_MSG_PAYLOAD_RATE1_5HZ); - /* insist of receiving the ACK for this packet */ - // if (wait_for_ack(UBX_CONFIG_TIMEOUT) < 0) - // continue; - configure_message_rate(UBX_CLASS_NAV, UBX_MESSAGE_NAV_TIMEUTC, - 1); - // /* insist of receiving the ACK for this packet */ - // if (wait_for_ack(UBX_CONFIG_TIMEOUT) < 0) - // continue; - configure_message_rate(UBX_CLASS_NAV, UBX_MESSAGE_NAV_SOL, - 1); - // /* insist of receiving the ACK for this packet */ - // if (wait_for_ack(UBX_CONFIG_TIMEOUT) < 0) - // continue; - configure_message_rate(UBX_CLASS_NAV, UBX_MESSAGE_NAV_VELNED, - 1); - // /* insist of receiving the ACK for this packet */ - // if (wait_for_ack(UBX_CONFIG_TIMEOUT) < 0) - // continue; - // configure_message_rate(UBX_CLASS_NAV, UBX_MESSAGE_NAV_DOP, - // 0); - // /* insist of receiving the ACK for this packet */ - // if (wait_for_ack(UBX_CONFIG_TIMEOUT) < 0) - // continue; - configure_message_rate(UBX_CLASS_NAV, UBX_MESSAGE_NAV_SVINFO, - 0); - // /* insist of receiving the ACK for this packet */ - // if (wait_for_ack(UBX_CONFIG_TIMEOUT) < 0) - // continue; - - _waiting_for_ack = false; - return 0; + cfg_nav5_packet.clsID = UBX_CLASS_CFG; + cfg_nav5_packet.msgID = UBX_MESSAGE_CFG_NAV5; + cfg_nav5_packet.length = UBX_CFG_NAV5_LENGTH; + cfg_nav5_packet.mask = UBX_CFG_NAV5_PAYLOAD_MASK; + cfg_nav5_packet.dynModel = UBX_CFG_NAV5_PAYLOAD_DYNMODEL; + cfg_nav5_packet.fixMode = UBX_CFG_NAV5_PAYLOAD_FIXMODE; + + send_config_packet(_fd, (uint8_t *)&cfg_nav5_packet, sizeof(cfg_nav5_packet)); + + if (wait_for_ack(UBX_CONFIG_TIMEOUT) < 0) { + warnx("ubx: configuration failed: NAV5"); + return 1; + } + + /* configure message rates */ + /* the last argument is divisor for measurement rate (set by CFG RATE), i.e. 1 means 5Hz */ + configure_message_rate(UBX_CLASS_NAV, UBX_MESSAGE_NAV_POSLLH, 1); + + if (wait_for_ack(UBX_CONFIG_TIMEOUT) < 0) { + warnx("ubx: msg rate configuration failed: NAV POSLLH\n"); + return 1; } - return -1; + + configure_message_rate(UBX_CLASS_NAV, UBX_MESSAGE_NAV_TIMEUTC, 1); + + if (wait_for_ack(UBX_CONFIG_TIMEOUT) < 0) { + warnx("ubx: msg rate configuration failed: NAV TIMEUTC\n"); + return 1; + } + + configure_message_rate(UBX_CLASS_NAV, UBX_MESSAGE_NAV_SOL, 1); + + if (wait_for_ack(UBX_CONFIG_TIMEOUT) < 0) { + warnx("ubx: msg rate configuration failed: NAV SOL\n"); + return 1; + } + + configure_message_rate(UBX_CLASS_NAV, UBX_MESSAGE_NAV_VELNED, 1); + + if (wait_for_ack(UBX_CONFIG_TIMEOUT) < 0) { + warnx("ubx: msg rate configuration failed: NAV VELNED\n"); + return 1; + } + + configure_message_rate(UBX_CLASS_NAV, UBX_MESSAGE_NAV_SVINFO, 5); + + if (wait_for_ack(UBX_CONFIG_TIMEOUT) < 0) { + warnx("ubx: msg rate configuration failed: NAV SVINFO\n"); + return 1; + } + + _configured = true; + return 0; } int UBX::wait_for_ack(unsigned timeout) { _waiting_for_ack = true; - int ret = receive(timeout); - _waiting_for_ack = false; - return ret; + uint64_t time_started = hrt_absolute_time(); + + while (hrt_absolute_time() < time_started + timeout * 1000) { + if (receive(timeout) > 0) { + if (!_waiting_for_ack) { + return 1; + } + + } else { + return -1; // timeout or error receiving, or NAK + } + } + + return -1; // timeout } int @@ -224,56 +254,56 @@ UBX::receive(unsigned timeout) fds[0].fd = _fd; fds[0].events = POLLIN; - uint8_t buf[32]; + uint8_t buf[128]; /* timeout additional to poll */ uint64_t time_started = hrt_absolute_time(); - int j = 0; ssize_t count = 0; - while (true) { + bool handled = false; - /* pass received bytes to the packet decoder */ - while (j < count) { - if (parse_char(buf[j]) > 0) { - /* return to configure during configuration or to the gps driver during normal work - * if a packet has arrived */ - if (handle_message() > 0) - return 1; - } - /* in case we keep trying but only get crap from GPS */ - if (time_started + timeout*1000 < hrt_absolute_time() ) { - return -1; - } - j++; - } - - /* everything is read */ - j = count = 0; + while (true) { - /* then poll for new data */ - int ret = ::poll(fds, sizeof(fds) / sizeof(fds[0]), timeout); + /* poll for new data, wait for only UBX_PACKET_TIMEOUT (2ms) if something already received */ + int ret = poll(fds, sizeof(fds) / sizeof(fds[0]), handled ? UBX_PACKET_TIMEOUT : timeout); if (ret < 0) { /* something went wrong when polling */ return -1; } else if (ret == 0) { - /* Timeout */ - return -1; + /* return success after short delay after receiving a packet or timeout after long delay */ + return handled ? 1 : -1; } else if (ret > 0) { /* if we have new data from GPS, go handle it */ if (fds[0].revents & POLLIN) { /* * We are here because poll says there is some data, so this - * won't block even on a blocking device. If more bytes are - * available, we'll go back to poll() again... + * won't block even on a blocking device. But don't read immediately + * by 1-2 bytes, wait for some more data to save expensive read() calls. + * If more bytes are available, we'll go back to poll() again. */ - count = ::read(_fd, buf, sizeof(buf)); + usleep(UBX_WAIT_BEFORE_READ * 1000); + count = read(_fd, buf, sizeof(buf)); + + /* pass received bytes to the packet decoder */ + for (int i = 0; i < count; i++) { + if (parse_char(buf[i]) > 0) { + /* return to configure during configuration or to the gps driver during normal work + * if a packet has arrived */ + if (handle_message() > 0) + handled = true; + } + } } } + + /* abort after timeout if no useful packets received */ + if (time_started + timeout * 1000 < hrt_absolute_time()) { + return -1; + } } } @@ -282,410 +312,292 @@ UBX::parse_char(uint8_t b) { switch (_decode_state) { /* First, look for sync1 */ - case UBX_DECODE_UNINIT: - if (b == UBX_SYNC1) { - _decode_state = UBX_DECODE_GOT_SYNC1; - } - break; - /* Second, look for sync2 */ - case UBX_DECODE_GOT_SYNC1: - if (b == UBX_SYNC2) { - _decode_state = UBX_DECODE_GOT_SYNC2; - } else { - /* Second start symbol was wrong, reset state machine */ - decode_init(); - } - break; - /* Now look for class */ - case UBX_DECODE_GOT_SYNC2: - /* everything except sync1 and sync2 needs to be added to the checksum */ - add_byte_to_checksum(b); - /* check for known class */ - switch (b) { - case UBX_CLASS_ACK: - _decode_state = UBX_DECODE_GOT_CLASS; - _message_class = ACK; - break; + case UBX_DECODE_UNINIT: + if (b == UBX_SYNC1) { + _decode_state = UBX_DECODE_GOT_SYNC1; + } - case UBX_CLASS_NAV: - _decode_state = UBX_DECODE_GOT_CLASS; - _message_class = NAV; - break; + break; -// case UBX_CLASS_RXM: -// _decode_state = UBX_DECODE_GOT_CLASS; -// _message_class = RXM; -// break; + /* Second, look for sync2 */ + case UBX_DECODE_GOT_SYNC1: + if (b == UBX_SYNC2) { + _decode_state = UBX_DECODE_GOT_SYNC2; + + } else { + /* Second start symbol was wrong, reset state machine */ + decode_init(); + /* don't return error, it can be just false sync1 */ + } - case UBX_CLASS_CFG: - _decode_state = UBX_DECODE_GOT_CLASS; - _message_class = CFG; - break; - default: //unknown class: reset state machine - decode_init(); - break; - } - break; - case UBX_DECODE_GOT_CLASS: - add_byte_to_checksum(b); - switch (_message_class) { - case NAV: - switch (b) { - case UBX_MESSAGE_NAV_POSLLH: - _decode_state = UBX_DECODE_GOT_MESSAGEID; - _message_id = NAV_POSLLH; - break; - - case UBX_MESSAGE_NAV_SOL: - _decode_state = UBX_DECODE_GOT_MESSAGEID; - _message_id = NAV_SOL; - break; - - case UBX_MESSAGE_NAV_TIMEUTC: - _decode_state = UBX_DECODE_GOT_MESSAGEID; - _message_id = NAV_TIMEUTC; - break; - -// case UBX_MESSAGE_NAV_DOP: -// _decode_state = UBX_DECODE_GOT_MESSAGEID; -// _message_id = NAV_DOP; -// break; - - case UBX_MESSAGE_NAV_SVINFO: - _decode_state = UBX_DECODE_GOT_MESSAGEID; - _message_id = NAV_SVINFO; - break; - - case UBX_MESSAGE_NAV_VELNED: - _decode_state = UBX_DECODE_GOT_MESSAGEID; - _message_id = NAV_VELNED; - break; - - default: //unknown class: reset state machine, should not happen - decode_init(); - break; - } - break; -// case RXM: -// switch (b) { -// case UBX_MESSAGE_RXM_SVSI: -// _decode_state = UBX_DECODE_GOT_MESSAGEID; -// _message_id = RXM_SVSI; -// break; -// -// default: //unknown class: reset state machine, should not happen -// decode_init(); -// break; -// } -// break; - - case CFG: - switch (b) { - case UBX_MESSAGE_CFG_NAV5: - _decode_state = UBX_DECODE_GOT_MESSAGEID; - _message_id = CFG_NAV5; - break; - - default: //unknown class: reset state machine, should not happen - decode_init(); - break; - } - break; + break; - case ACK: - switch (b) { - case UBX_MESSAGE_ACK_ACK: - _decode_state = UBX_DECODE_GOT_MESSAGEID; - _message_id = ACK_ACK; - break; - case UBX_MESSAGE_ACK_NAK: - _decode_state = UBX_DECODE_GOT_MESSAGEID; - _message_id = ACK_NAK; - break; - default: //unknown class: reset state machine, should not happen - decode_init(); - break; - } - break; - default: //should not happen because we set the class - warnx("UBX Error, we set a class that we don't know"); - decode_init(); -// config_needed = true; - break; - } - break; - case UBX_DECODE_GOT_MESSAGEID: - add_byte_to_checksum(b); - _payload_size = b; //this is the first length byte - _decode_state = UBX_DECODE_GOT_LENGTH1; - break; - case UBX_DECODE_GOT_LENGTH1: - add_byte_to_checksum(b); - _payload_size += b << 8; // here comes the second byte of length - _decode_state = UBX_DECODE_GOT_LENGTH2; - break; - case UBX_DECODE_GOT_LENGTH2: - /* Add to checksum if not yet at checksum byte */ - if (_rx_count < _payload_size) - add_byte_to_checksum(b); - _rx_buffer[_rx_count] = b; - /* once the payload has arrived, we can process the information */ - if (_rx_count >= _payload_size + 1) { //+1 because of 2 checksum bytes - - /* compare checksum */ - if (_rx_ck_a == _rx_buffer[_rx_count-1] && _rx_ck_b == _rx_buffer[_rx_count]) { - return 1; - } else { - decode_init(); - return -1; - warnx("ubx: Checksum wrong"); - } + /* Now look for class */ + case UBX_DECODE_GOT_SYNC2: + /* everything except sync1 and sync2 needs to be added to the checksum */ + add_byte_to_checksum(b); + _message_class = b; + _decode_state = UBX_DECODE_GOT_CLASS; + break; - return 1; - } else if (_rx_count < RECV_BUFFER_SIZE) { - _rx_count++; - } else { - warnx("ubx: buffer full"); - decode_init(); - return -1; - } - break; - default: - break; - } - return 0; //XXX ? -} + case UBX_DECODE_GOT_CLASS: + add_byte_to_checksum(b); + _message_id = b; + _decode_state = UBX_DECODE_GOT_MESSAGEID; + break; + case UBX_DECODE_GOT_MESSAGEID: + add_byte_to_checksum(b); + _payload_size = b; //this is the first length byte + _decode_state = UBX_DECODE_GOT_LENGTH1; + break; -int -UBX::handle_message() -{ - int ret = 0; + case UBX_DECODE_GOT_LENGTH1: + add_byte_to_checksum(b); + _payload_size += b << 8; // here comes the second byte of length + _decode_state = UBX_DECODE_GOT_LENGTH2; + break; - switch (_message_id) { //this enum is unique for all ids --> no need to check the class - case NAV_POSLLH: { -// printf("GOT NAV_POSLLH MESSAGE\n"); - if (!_waiting_for_ack) { - gps_bin_nav_posllh_packet_t *packet = (gps_bin_nav_posllh_packet_t *) _rx_buffer; + case UBX_DECODE_GOT_LENGTH2: - _gps_position->lat = packet->lat; - _gps_position->lon = packet->lon; - _gps_position->alt = packet->height_msl; + /* Add to checksum if not yet at checksum byte */ + if (_rx_count < _payload_size) + add_byte_to_checksum(b); - _gps_position->eph_m = (float)packet->hAcc * 1e-3f; // from mm to m - _gps_position->epv_m = (float)packet->vAcc * 1e-3f; // from mm to m + _rx_buffer[_rx_count] = b; - _rate_count_lat_lon++; + /* once the payload has arrived, we can process the information */ + if (_rx_count >= _payload_size + 1) { //+1 because of 2 checksum bytes + /* compare checksum */ + if (_rx_ck_a == _rx_buffer[_rx_count - 1] && _rx_ck_b == _rx_buffer[_rx_count]) { + decode_init(); + return 1; // message received successfully - /* Add timestamp to finish the report */ - _gps_position->timestamp_position = hrt_absolute_time(); - /* only return 1 when new position is available */ - ret = 1; + } else { + warnx("ubx: checksum wrong"); + decode_init(); + return -1; } - break; + + } else if (_rx_count < RECV_BUFFER_SIZE) { + _rx_count++; + + } else { + warnx("ubx: buffer full"); + decode_init(); + return -1; } - case NAV_SOL: { -// printf("GOT NAV_SOL MESSAGE\n"); - if (!_waiting_for_ack) { - gps_bin_nav_sol_packet_t *packet = (gps_bin_nav_sol_packet_t *) _rx_buffer; + break; - _gps_position->fix_type = packet->gpsFix; - _gps_position->s_variance_m_s = packet->sAcc; - _gps_position->p_variance_m = packet->pAcc; + default: + break; + } - _gps_position->timestamp_variance = hrt_absolute_time(); - } - break; - } + return 0; // message decoding in progress +} -// case NAV_DOP: { -//// printf("GOT NAV_DOP MESSAGE\n"); -// gps_bin_nav_dop_packet_t *packet = (gps_bin_nav_dop_packet_t *) _rx_buffer; -// -// _gps_position->eph_m = packet->hDOP; -// _gps_position->epv = packet->vDOP; -// -// _gps_position->timestamp_posdilution = hrt_absolute_time(); -// -// _new_nav_dop = true; -// -// break; -// } - - case NAV_TIMEUTC: { -// printf("GOT NAV_TIMEUTC MESSAGE\n"); - if (!_waiting_for_ack) { - gps_bin_nav_timeutc_packet_t *packet = (gps_bin_nav_timeutc_packet_t *) _rx_buffer; - //convert to unix timestamp - struct tm timeinfo; - timeinfo.tm_year = packet->year - 1900; - timeinfo.tm_mon = packet->month - 1; - timeinfo.tm_mday = packet->day; - timeinfo.tm_hour = packet->hour; - timeinfo.tm_min = packet->min; - timeinfo.tm_sec = packet->sec; +int +UBX::handle_message() +{ + int ret = 0; - time_t epoch = mktime(&timeinfo); + if (_configured) { + /* handle only info messages when configured */ + switch (_message_class) { + case UBX_CLASS_NAV: + switch (_message_id) { + case UBX_MESSAGE_NAV_POSLLH: { + // printf("GOT NAV_POSLLH\n"); + gps_bin_nav_posllh_packet_t *packet = (gps_bin_nav_posllh_packet_t *) _rx_buffer; - _gps_position->time_gps_usec = (uint64_t)epoch * 1000000; //TODO: test this - _gps_position->time_gps_usec += (uint64_t)(packet->time_nanoseconds * 1e-3f); + _gps_position->lat = packet->lat; + _gps_position->lon = packet->lon; + _gps_position->alt = packet->height_msl; + _gps_position->eph_m = (float)packet->hAcc * 1e-3f; // from mm to m + _gps_position->epv_m = (float)packet->vAcc * 1e-3f; // from mm to m + _gps_position->timestamp_position = hrt_absolute_time(); - _gps_position->timestamp_time = hrt_absolute_time(); - } - break; - } + _rate_count_lat_lon++; - case NAV_SVINFO: { -// printf("GOT NAV_SVINFO MESSAGE\n"); + ret = 1; + break; + } - if (!_waiting_for_ack) { - //this is a more complicated message: the length depends on the number of satellites. This number is extracted from the first part of the message - const int length_part1 = 8; - char _rx_buffer_part1[length_part1]; - memcpy(_rx_buffer_part1, _rx_buffer, length_part1); - gps_bin_nav_svinfo_part1_packet_t *packet_part1 = (gps_bin_nav_svinfo_part1_packet_t *) _rx_buffer_part1; + case UBX_MESSAGE_NAV_SOL: { + // printf("GOT NAV_SOL\n"); + gps_bin_nav_sol_packet_t *packet = (gps_bin_nav_sol_packet_t *) _rx_buffer; - //read checksum - const int length_part3 = 2; - char _rx_buffer_part3[length_part3]; - memcpy(_rx_buffer_part3, &(_rx_buffer[_rx_count - 1]), length_part3); + _gps_position->fix_type = packet->gpsFix; + _gps_position->s_variance_m_s = packet->sAcc; + _gps_position->p_variance_m = packet->pAcc; + _gps_position->timestamp_variance = hrt_absolute_time(); - //definitions needed to read numCh elements from the buffer: - const int length_part2 = 12; - gps_bin_nav_svinfo_part2_packet_t *packet_part2; - char _rx_buffer_part2[length_part2]; //for temporal storage + ret = 1; + break; + } - uint8_t satellites_used = 0; - int i; + case UBX_MESSAGE_NAV_TIMEUTC: { + // printf("GOT NAV_TIMEUTC\n"); + gps_bin_nav_timeutc_packet_t *packet = (gps_bin_nav_timeutc_packet_t *) _rx_buffer; - for (i = 0; i < packet_part1->numCh; i++) { //for each channel + /* convert to unix timestamp */ + struct tm timeinfo; + timeinfo.tm_year = packet->year - 1900; + timeinfo.tm_mon = packet->month - 1; + timeinfo.tm_mday = packet->day; + timeinfo.tm_hour = packet->hour; + timeinfo.tm_min = packet->min; + timeinfo.tm_sec = packet->sec; + time_t epoch = mktime(&timeinfo); + + _gps_position->time_gps_usec = (uint64_t)epoch * 1000000; //TODO: test this + _gps_position->time_gps_usec += (uint64_t)(packet->time_nanoseconds * 1e-3f); + _gps_position->timestamp_time = hrt_absolute_time(); + + ret = 1; + break; + } - /* Get satellite information from the buffer */ - memcpy(_rx_buffer_part2, &(_rx_buffer[length_part1 + i * length_part2]), length_part2); - packet_part2 = (gps_bin_nav_svinfo_part2_packet_t *) _rx_buffer_part2; + case UBX_MESSAGE_NAV_SVINFO: { + //printf("GOT NAV_SVINFO\n"); + const int length_part1 = 8; + gps_bin_nav_svinfo_part1_packet_t *packet_part1 = (gps_bin_nav_svinfo_part1_packet_t *) _rx_buffer; + const int length_part2 = 12; + gps_bin_nav_svinfo_part2_packet_t *packet_part2; + uint8_t satellites_used = 0; + int i; - /* Write satellite information in the global storage */ - _gps_position->satellite_prn[i] = packet_part2->svid; + //printf("Number of Channels: %d\n", packet_part1->numCh); + for (i = 0; i < packet_part1->numCh; i++) { + /* set pointer to sattelite_i information */ + packet_part2 = (gps_bin_nav_svinfo_part2_packet_t *) & (_rx_buffer[length_part1 + i * length_part2]); - //if satellite information is healthy store the data - uint8_t unhealthy = packet_part2->flags & 1 << 4; //flags is a bitfield + /* write satellite information to global storage */ + uint8_t sv_used = packet_part2->flags & 0x01; - if (!unhealthy) { - if ((packet_part2->flags) & 1) { //flags is a bitfield - _gps_position->satellite_used[i] = 1; + if (sv_used) { + /* count SVs used for NAV */ satellites_used++; - - } else { - _gps_position->satellite_used[i] = 0; } + /* record info for all channels, whether or not the SV is used for NAV */ + _gps_position->satellite_used[i] = sv_used; _gps_position->satellite_snr[i] = packet_part2->cno; _gps_position->satellite_elevation[i] = (uint8_t)(packet_part2->elev); _gps_position->satellite_azimuth[i] = (uint8_t)((float)packet_part2->azim * 255.0f / 360.0f); + _gps_position->satellite_prn[i] = packet_part2->svid; + //printf("SAT %d: %d %d %d %d\n", i, (int)sv_used, (int)packet_part2->cno, (int)(uint8_t)(packet_part2->elev), (int)packet_part2->svid); + } - } else { + for (i = packet_part1->numCh; i < 20; i++) { + /* unused channels have to be set to zero for e.g. MAVLink */ + _gps_position->satellite_prn[i] = 0; _gps_position->satellite_used[i] = 0; _gps_position->satellite_snr[i] = 0; _gps_position->satellite_elevation[i] = 0; _gps_position->satellite_azimuth[i] = 0; } - } + _gps_position->satellites_visible = satellites_used; // visible ~= used but we are interested in the used ones - for (i = packet_part1->numCh; i < 20; i++) { //these channels are unused - /* Unused channels have to be set to zero for e.g. MAVLink */ - _gps_position->satellite_prn[i] = 0; - _gps_position->satellite_used[i] = 0; - _gps_position->satellite_snr[i] = 0; - _gps_position->satellite_elevation[i] = 0; - _gps_position->satellite_azimuth[i] = 0; + if (packet_part1->numCh > 0) { + _gps_position->satellite_info_available = true; + + } else { + _gps_position->satellite_info_available = false; + } + + _gps_position->timestamp_satellites = hrt_absolute_time(); + + ret = 1; + break; } - _gps_position->satellites_visible = satellites_used; // visible ~= used but we are interested in the used ones - /* set timestamp if any sat info is available */ - if (packet_part1->numCh > 0) { - _gps_position->satellite_info_available = true; - } else { - _gps_position->satellite_info_available = false; + case UBX_MESSAGE_NAV_VELNED: { + // printf("GOT NAV_VELNED\n"); + gps_bin_nav_velned_packet_t *packet = (gps_bin_nav_velned_packet_t *) _rx_buffer; + + _gps_position->vel_m_s = (float)packet->speed * 1e-2f; + _gps_position->vel_n_m_s = (float)packet->velN * 1e-2f; /* NED NORTH velocity */ + _gps_position->vel_e_m_s = (float)packet->velE * 1e-2f; /* NED EAST velocity */ + _gps_position->vel_d_m_s = (float)packet->velD * 1e-2f; /* NED DOWN velocity */ + _gps_position->cog_rad = (float)packet->heading * M_DEG_TO_RAD_F * 1e-5f; + _gps_position->c_variance_rad = (float)packet->cAcc * M_DEG_TO_RAD_F * 1e-5f; + _gps_position->vel_ned_valid = true; + _gps_position->timestamp_velocity = hrt_absolute_time(); + + _rate_count_vel++; + + ret = 1; + break; } - _gps_position->timestamp_satellites = hrt_absolute_time(); + + default: + break; } break; - } - case NAV_VELNED: { - - if (!_waiting_for_ack) { - /* 35.15 NAV-VELNED (0x01 0x12) message (page 181 / 210 of reference manual */ - gps_bin_nav_velned_packet_t *packet = (gps_bin_nav_velned_packet_t *) _rx_buffer; - - _gps_position->vel_m_s = (float)packet->speed * 1e-2f; - _gps_position->vel_n_m_s = (float)packet->velN * 1e-2f; /* NED NORTH velocity */ - _gps_position->vel_e_m_s = (float)packet->velE * 1e-2f; /* NED EAST velocity */ - _gps_position->vel_d_m_s = (float)packet->velD * 1e-2f; /* NED DOWN velocity */ - _gps_position->cog_rad = (float)packet->heading * M_DEG_TO_RAD_F * 1e-5f; - _gps_position->c_variance_rad = (float)packet->cAcc * M_DEG_TO_RAD_F * 1e-5f; - _gps_position->vel_ned_valid = true; - _gps_position->timestamp_velocity = hrt_absolute_time(); - - _rate_count_vel++; + case UBX_CLASS_ACK: { + /* ignore ACK when already configured */ + ret = 1; + break; } + default: break; } -// case RXM_SVSI: { -// printf("GOT RXM_SVSI MESSAGE\n"); -// const int length_part1 = 7; -// char _rx_buffer_part1[length_part1]; -// memcpy(_rx_buffer_part1, _rx_buffer, length_part1); -// gps_bin_rxm_svsi_packet_t *packet = (gps_bin_rxm_svsi_packet_t *) _rx_buffer_part1; -// -// _gps_position->satellites_visible = packet->numVis; -// _gps_position->counter++; -// _last_message_timestamps[RXM_SVSI - 1] = hrt_absolute_time(); -// -// break; -// } - case ACK_ACK: { -// printf("GOT ACK_ACK\n"); - gps_bin_ack_ack_packet_t *packet = (gps_bin_ack_ack_packet_t *) _rx_buffer; - - if (_waiting_for_ack) { - if (packet->clsID == _clsID_needed && packet->msgID == _msgID_needed) { - ret = 1; - } + if (ret == 0) { + /* message not handled */ + warnx("ubx: unknown message received: 0x%02x-0x%02x\n", (unsigned)_message_class, (unsigned)_message_id); + + if ((_disable_cmd_counter = _disable_cmd_counter++ % 10) == 0) { + /* don't attempt for every message to disable, some might not be disabled */ + warnx("ubx: disabling message 0x%02x-0x%02x", (unsigned)_message_class, (unsigned)_message_id); + configure_message_rate(_message_class, _message_id, 0); } } - break; - case ACK_NAK: { -// printf("GOT ACK_NAK\n"); - warnx("UBX: Received: Not Acknowledged"); - /* configuration obviously not successful */ - ret = -1; - break; - } + } else { + /* handle only ACK while configuring */ + if (_message_class == UBX_CLASS_ACK) { + switch (_message_id) { + case UBX_MESSAGE_ACK_ACK: { + // printf("GOT ACK_ACK\n"); + gps_bin_ack_ack_packet_t *packet = (gps_bin_ack_ack_packet_t *) _rx_buffer; + + if (_waiting_for_ack) { + if (packet->clsID == _message_class_needed && packet->msgID == _message_id_needed) { + _waiting_for_ack = false; + ret = 1; + } + } - default: //we don't know the message - warnx("UBX: Unknown message received: %d-%d\n",_message_class,_message_id); - if (_disable_cmd_counter++ == 0) { - // Don't attempt for every message to disable, some might not be disabled */ - warnx("Disabling message 0x%02x 0x%02x", (unsigned)_message_class, (unsigned)_message_id); - configure_message_rate(_message_class, _message_id, 0); + break; + } + + case UBX_MESSAGE_ACK_NAK: { + // printf("GOT ACK_NAK\n"); + warnx("ubx: not acknowledged"); + /* configuration obviously not successful */ + _waiting_for_ack = false; + ret = -1; + break; + } + + default: + break; } - return ret; - ret = -1; - break; } - // end if _rx_count high enough + } + decode_init(); - return ret; //XXX? + return ret; } void @@ -695,9 +607,8 @@ UBX::decode_init(void) _rx_ck_b = 0; _rx_count = 0; _decode_state = UBX_DECODE_UNINIT; - _message_class = CLASS_UNKNOWN; - _message_id = ID_UNKNOWN; _payload_size = 0; + /* don't reset _message_class, _message_id, _rx_buffer leave it for message handler */ } void @@ -708,23 +619,24 @@ UBX::add_byte_to_checksum(uint8_t b) } void -UBX::add_checksum_to_message(uint8_t* message, const unsigned length) +UBX::add_checksum_to_message(uint8_t *message, const unsigned length) { uint8_t ck_a = 0; uint8_t ck_b = 0; unsigned i; - for (i = 0; i < length-2; i++) { + for (i = 0; i < length - 2; i++) { ck_a = ck_a + message[i]; ck_b = ck_b + ck_a; } + /* The checksum is written to the last to bytes of a message */ - message[length-2] = ck_a; - message[length-1] = ck_b; + message[length - 2] = ck_a; + message[length - 1] = ck_b; } void -UBX::add_checksum(uint8_t* message, const unsigned length, uint8_t &ck_a, uint8_t &ck_b) +UBX::add_checksum(uint8_t *message, const unsigned length, uint8_t &ck_a, uint8_t &ck_b) { for (unsigned i = 0; i < length; i++) { ck_a = ck_a + message[i]; @@ -735,11 +647,11 @@ UBX::add_checksum(uint8_t* message, const unsigned length, uint8_t &ck_a, uint8_ void UBX::configure_message_rate(uint8_t msg_class, uint8_t msg_id, uint8_t rate) { - struct ubx_cfg_msg_rate msg; - msg.msg_class = msg_class; - msg.msg_id = msg_id; - msg.rate = rate; - send_message(UBX_CLASS_CFG, UBX_MESSAGE_CFG_MSG, &msg, sizeof(msg)); + struct ubx_cfg_msg_rate msg; + msg.msg_class = msg_class; + msg.msg_id = msg_id; + msg.rate = rate; + send_message(UBX_CLASS_CFG, UBX_MESSAGE_CFG_MSG, &msg, sizeof(msg)); } void @@ -764,19 +676,19 @@ void UBX::send_message(uint8_t msg_class, uint8_t msg_id, void *msg, uint8_t size) { struct ubx_header header; - uint8_t ck_a=0, ck_b=0; + uint8_t ck_a = 0, ck_b = 0; header.sync1 = UBX_SYNC1; header.sync2 = UBX_SYNC2; header.msg_class = msg_class; header.msg_id = msg_id; header.length = size; - add_checksum((uint8_t *)&header.msg_class, sizeof(header)-2, ck_a, ck_b); + add_checksum((uint8_t *)&header.msg_class, sizeof(header) - 2, ck_a, ck_b); add_checksum((uint8_t *)msg, size, ck_a, ck_b); // Configure receive check - _clsID_needed = msg_class; - _msgID_needed = msg_id; + _message_class_needed = msg_class; + _message_id_needed = msg_id; write(_fd, (const char *)&header, sizeof(header)); write(_fd, (const char *)msg, size); diff --git a/src/drivers/gps/ubx.h b/src/drivers/gps/ubx.h index 5a433642c..4fc276975 100644 --- a/src/drivers/gps/ubx.h +++ b/src/drivers/gps/ubx.h @@ -3,6 +3,7 @@ * Copyright (C) 2008-2013 PX4 Development Team. All rights reserved. * Author: Thomas Gubler <thomasgubler@student.ethz.ch> * Julian Oes <joes@student.ethz.ch> + * Anton Babushkin <anton.babushkin@me.com> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -51,23 +52,23 @@ /* MessageIDs (the ones that are used) */ #define UBX_MESSAGE_NAV_POSLLH 0x02 -#define UBX_MESSAGE_NAV_SOL 0x06 -#define UBX_MESSAGE_NAV_TIMEUTC 0x21 //#define UBX_MESSAGE_NAV_DOP 0x04 -#define UBX_MESSAGE_NAV_SVINFO 0x30 +#define UBX_MESSAGE_NAV_SOL 0x06 #define UBX_MESSAGE_NAV_VELNED 0x12 //#define UBX_MESSAGE_RXM_SVSI 0x20 -#define UBX_MESSAGE_ACK_ACK 0x01 +#define UBX_MESSAGE_NAV_TIMEUTC 0x21 +#define UBX_MESSAGE_NAV_SVINFO 0x30 #define UBX_MESSAGE_ACK_NAK 0x00 +#define UBX_MESSAGE_ACK_ACK 0x01 #define UBX_MESSAGE_CFG_PRT 0x00 -#define UBX_MESSAGE_CFG_NAV5 0x24 #define UBX_MESSAGE_CFG_MSG 0x01 #define UBX_MESSAGE_CFG_RATE 0x08 +#define UBX_MESSAGE_CFG_NAV5 0x24 #define UBX_CFG_PRT_LENGTH 20 #define UBX_CFG_PRT_PAYLOAD_PORTID 0x01 /**< UART1 */ #define UBX_CFG_PRT_PAYLOAD_MODE 0x000008D0 /**< 0b0000100011010000: 8N1 */ -#define UBX_CFG_PRT_PAYLOAD_BAUDRATE 38400 /**< always choose 38400 as GPS baudrate */ +#define UBX_CFG_PRT_PAYLOAD_BAUDRATE 38400 /**< choose 38400 as GPS baudrate */ #define UBX_CFG_PRT_PAYLOAD_INPROTOMASK 0x01 /**< UBX in */ #define UBX_CFG_PRT_PAYLOAD_OUTPROTOMASK 0x01 /**< UBX out */ @@ -299,44 +300,6 @@ struct ubx_cfg_msg_rate { // ************ typedef enum { - UBX_CONFIG_STATE_PRT = 0, - UBX_CONFIG_STATE_PRT_NEW_BAUDRATE, - UBX_CONFIG_STATE_RATE, - UBX_CONFIG_STATE_NAV5, - UBX_CONFIG_STATE_MSG_NAV_POSLLH, - UBX_CONFIG_STATE_MSG_NAV_TIMEUTC, - UBX_CONFIG_STATE_MSG_NAV_DOP, - UBX_CONFIG_STATE_MSG_NAV_SVINFO, - UBX_CONFIG_STATE_MSG_NAV_SOL, - UBX_CONFIG_STATE_MSG_NAV_VELNED, -// UBX_CONFIG_STATE_MSG_RXM_SVSI, - UBX_CONFIG_STATE_CONFIGURED -} ubx_config_state_t; - -typedef enum { - CLASS_UNKNOWN = 0, - NAV = 1, - RXM = 2, - ACK = 3, - CFG = 4 -} ubx_message_class_t; - -typedef enum { - //these numbers do NOT correspond to the message id numbers of the ubx protocol - ID_UNKNOWN = 0, - NAV_POSLLH, - NAV_SOL, - NAV_TIMEUTC, -// NAV_DOP, - NAV_SVINFO, - NAV_VELNED, -// RXM_SVSI, - CFG_NAV5, - ACK_ACK, - ACK_NAK, -} ubx_message_id_t; - -typedef enum { UBX_DECODE_UNINIT = 0, UBX_DECODE_GOT_SYNC1, UBX_DECODE_GOT_SYNC2, @@ -401,17 +364,17 @@ private: int _fd; struct vehicle_gps_position_s *_gps_position; - ubx_config_state_t _config_state; + bool _configured; bool _waiting_for_ack; - uint8_t _clsID_needed; - uint8_t _msgID_needed; + uint8_t _message_class_needed; + uint8_t _message_id_needed; ubx_decode_state_t _decode_state; uint8_t _rx_buffer[RECV_BUFFER_SIZE]; unsigned _rx_count; uint8_t _rx_ck_a; uint8_t _rx_ck_b; - ubx_message_class_t _message_class; - ubx_message_id_t _message_id; + uint8_t _message_class; + uint8_t _message_id; unsigned _payload_size; uint8_t _disable_cmd_counter; }; diff --git a/src/drivers/mpu6000/mpu6000.cpp b/src/drivers/mpu6000/mpu6000.cpp index df1958186..220842536 100644 --- a/src/drivers/mpu6000/mpu6000.cpp +++ b/src/drivers/mpu6000/mpu6000.cpp @@ -1,6 +1,6 @@ /**************************************************************************** * - * Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. + * Copyright (C) 2012 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -272,6 +272,11 @@ private: */ void _set_dlpf_filter(uint16_t frequency_hz); + /* + set sample rate (approximate) - 1kHz to 5Hz + */ + void _set_sample_rate(uint16_t desired_sample_rate_hz); + }; /** @@ -378,7 +383,8 @@ MPU6000::init() up_udelay(1000); // SAMPLE RATE - write_reg(MPUREG_SMPLRT_DIV, 0x04); // Sample rate = 200Hz Fsample= 1Khz/(4+1) = 200Hz + //write_reg(MPUREG_SMPLRT_DIV, 0x04); // Sample rate = 200Hz Fsample= 1Khz/(4+1) = 200Hz + _set_sample_rate(200); // default sample rate = 200Hz usleep(1000); // FS & DLPF FS=2000 deg/s, DLPF = 20Hz (low pass filter) @@ -494,6 +500,18 @@ MPU6000::probe() } /* + set sample rate (approximate) - 1kHz to 5Hz, for both accel and gyro +*/ +void +MPU6000::_set_sample_rate(uint16_t desired_sample_rate_hz) +{ + uint8_t div = 1000 / desired_sample_rate_hz; + if(div>200) div=200; + if(div<1) div=1; + write_reg(MPUREG_SMPLRT_DIV, div-1); +} + +/* set the DLPF filter frequency. This affects both accel and gyro. */ void @@ -644,8 +662,8 @@ MPU6000::ioctl(struct file *filp, int cmd, unsigned long arg) case ACCELIOCSSAMPLERATE: case ACCELIOCGSAMPLERATE: - /* XXX not implemented */ - return -EINVAL; + _set_sample_rate(arg); + return OK; case ACCELIOCSLOWPASS: case ACCELIOCGLOWPASS: @@ -702,8 +720,8 @@ MPU6000::gyro_ioctl(struct file *filp, int cmd, unsigned long arg) case GYROIOCSSAMPLERATE: case GYROIOCGSAMPLERATE: - /* XXX not implemented */ - return -EINVAL; + _set_sample_rate(arg); + return OK; case GYROIOCSLOWPASS: case GYROIOCGLOWPASS: diff --git a/src/drivers/px4fmu/fmu.cpp b/src/drivers/px4fmu/fmu.cpp index 5147ac500..a98b527b1 100644 --- a/src/drivers/px4fmu/fmu.cpp +++ b/src/drivers/px4fmu/fmu.cpp @@ -166,7 +166,7 @@ PX4FMU *g_fmu; } // namespace PX4FMU::PX4FMU() : - CDev("fmuservo", "/dev/px4fmu"), + CDev("fmuservo", PX4FMU_DEVICE_PATH), _mode(MODE_NONE), _pwm_default_rate(50), _pwm_alt_rate(50), diff --git a/src/drivers/px4io/px4io.cpp b/src/drivers/px4io/px4io.cpp index 19163cebe..ae56b70b3 100644 --- a/src/drivers/px4io/px4io.cpp +++ b/src/drivers/px4io/px4io.cpp @@ -129,6 +129,16 @@ public: */ void print_status(); + inline void set_dsm_vcc_ctl(bool enable) + { + _dsm_vcc_ctl = enable; + }; + + inline bool get_dsm_vcc_ctl() + { + return _dsm_vcc_ctl; + }; + private: // XXX unsigned _max_actuators; @@ -173,6 +183,12 @@ private: uint64_t _battery_last_timestamp; /** + * Relay1 is dedicated to controlling DSM receiver power + */ + + bool _dsm_vcc_ctl; + + /** * Trampoline to the worker task */ static void task_main_trampoline(int argc, char *argv[]); @@ -313,7 +329,7 @@ PX4IO *g_dev; } PX4IO::PX4IO() : - I2C("px4io", "/dev/px4io", PX4_I2C_BUS_ONBOARD, PX4_I2C_OBDEV_PX4IO, 320000), + I2C("px4io", PX4IO_DEVICE_PATH, PX4_I2C_BUS_ONBOARD, PX4_I2C_OBDEV_PX4IO, 320000), _max_actuators(0), _max_controls(0), _max_rc_input(0), @@ -338,7 +354,8 @@ PX4IO::PX4IO() : _battery_amp_per_volt(90.0f/5.0f), // this matches the 3DR current sensor _battery_amp_bias(0), _battery_mamphour_total(0), - _battery_last_timestamp(0) + _battery_last_timestamp(0), + _dsm_vcc_ctl(false) { /* we need this potentially before it could be set in task_main */ g_dev = this; @@ -700,8 +717,6 @@ PX4IO::io_set_control_state() int PX4IO::set_failsafe_values(const uint16_t *vals, unsigned len) { - uint16_t regs[_max_actuators]; - if (len > _max_actuators) /* fail with error */ return E2BIG; @@ -1271,13 +1286,14 @@ PX4IO::print_status() printf("%u bytes free\n", io_reg_get(PX4IO_PAGE_STATUS, PX4IO_P_STATUS_FREEMEM)); uint16_t flags = io_reg_get(PX4IO_PAGE_STATUS, PX4IO_P_STATUS_FLAGS); - printf("status 0x%04x%s%s%s%s%s%s%s%s%s%s%s%s\n", + printf("status 0x%04x%s%s%s%s%s%s%s%s%s%s%s%s%s\n", flags, ((flags & PX4IO_P_STATUS_FLAGS_ARMED) ? " ARMED" : ""), ((flags & PX4IO_P_STATUS_FLAGS_OVERRIDE) ? " OVERRIDE" : ""), ((flags & PX4IO_P_STATUS_FLAGS_RC_OK) ? " RC_OK" : " RC_FAIL"), ((flags & PX4IO_P_STATUS_FLAGS_RC_PPM) ? " PPM" : ""), - ((flags & PX4IO_P_STATUS_FLAGS_RC_DSM) ? " DSM" : ""), + (((flags & PX4IO_P_STATUS_FLAGS_RC_DSM) && (!(flags & PX4IO_P_STATUS_FLAGS_RC_DSM11))) ? " DSM10" : ""), + (((flags & PX4IO_P_STATUS_FLAGS_RC_DSM) && (flags & PX4IO_P_STATUS_FLAGS_RC_DSM11)) ? " DSM11" : ""), ((flags & PX4IO_P_STATUS_FLAGS_RC_SBUS) ? " SBUS" : ""), ((flags & PX4IO_P_STATUS_FLAGS_FMU_OK) ? " FMU_OK" : " FMU_FAIL"), ((flags & PX4IO_P_STATUS_FLAGS_RAW_PWM) ? " RAW_PPM" : ""), @@ -1372,7 +1388,8 @@ PX4IO::print_status() } int -PX4IO::ioctl(file *filep, int cmd, unsigned long arg) +PX4IO::ioctl(file * /*filep*/, int cmd, unsigned long arg) +/* Make it obvious that file * isn't used here */ { int ret = OK; @@ -1424,6 +1441,26 @@ PX4IO::ioctl(file *filep, int cmd, unsigned long arg) *(unsigned *)arg = _max_actuators; break; + case DSM_BIND_START: + io_reg_set(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_DSM, dsm_bind_power_down); + usleep(500000); + io_reg_set(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_DSM, dsm_bind_set_rx_out); + usleep(1000); + io_reg_set(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_DSM, dsm_bind_power_up); + usleep(100000); + io_reg_set(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_DSM, dsm_bind_send_pulses | (arg << 4)); + break; + + case DSM_BIND_STOP: + io_reg_set(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_DSM, dsm_bind_power_down); + io_reg_set(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_DSM, dsm_bind_reinit_uart); + usleep(500000); + break; + + case DSM_BIND_POWER_UP: + io_reg_set(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_DSM, dsm_bind_power_up); + break; + case PWM_SERVO_SET(0) ... PWM_SERVO_SET(PWM_OUTPUT_MAX_CHANNELS - 1): { /* TODO: we could go lower for e.g. TurboPWM */ @@ -1466,18 +1503,31 @@ PX4IO::ioctl(file *filep, int cmd, unsigned long arg) break; } - case GPIO_RESET: - ret = io_reg_set(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_RELAYS, 0); + case GPIO_RESET: { + uint32_t bits = (1 << _max_relays) - 1; + /* don't touch relay1 if it's controlling RX vcc */ + if (_dsm_vcc_ctl) + bits &= ~PX4IO_RELAY1; + ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_RELAYS, bits, 0); break; + } case GPIO_SET: arg &= ((1 << _max_relays) - 1); - ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_RELAYS, 0, arg); + /* don't touch relay1 if it's controlling RX vcc */ + if (_dsm_vcc_ctl & (arg & PX4IO_RELAY1)) + ret = -EINVAL; + else + ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_RELAYS, 0, arg); break; case GPIO_CLEAR: arg &= ((1 << _max_relays) - 1); - ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_RELAYS, arg, 0); + /* don't touch relay1 if it's controlling RX vcc */ + if (_dsm_vcc_ctl & (arg & PX4IO_RELAY1)) + ret = -EINVAL; + else + ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_RELAYS, arg, 0); break; case GPIO_GET: @@ -1614,10 +1664,65 @@ start(int argc, char *argv[]) errx(1, "driver init failed"); } + int dsm_vcc_ctl; + + if (param_get(param_find("RC_RL1_DSM_VCC"), &dsm_vcc_ctl) == OK) { + if (dsm_vcc_ctl) { + g_dev->set_dsm_vcc_ctl(true); + g_dev->ioctl(nullptr, DSM_BIND_POWER_UP, 0); + } + } exit(0); } void +bind(int argc, char *argv[]) +{ + int pulses; + + if (g_dev == nullptr) + errx(1, "px4io must be started first"); + + if (!g_dev->get_dsm_vcc_ctl()) + errx(1, "DSM bind feature not enabled"); + + if (argc < 3) + errx(0, "needs argument, use dsm2 or dsmx"); + + if (!strcmp(argv[2], "dsm2")) + pulses = 3; + else if (!strcmp(argv[2], "dsmx")) + pulses = 7; + else + errx(1, "unknown parameter %s, use dsm2 or dsmx", argv[2]); + + /* Open console directly to grab CTRL-C signal */ + int console = open("/dev/console", O_NONBLOCK | O_RDONLY | O_NOCTTY); + if (!console) + errx(1, "failed opening console"); + + warnx("This command will only bind DSM if satellite VCC (red wire) is controlled by relay 1."); + warnx("Press CTRL-C or 'c' when done."); + + g_dev->ioctl(nullptr, DSM_BIND_START, pulses); + + for (;;) { + usleep(500000L); + /* Check if user wants to quit */ + char c; + if (read(console, &c, 1) == 1) { + if (c == 0x03 || c == 0x63) { + warnx("Done\n"); + g_dev->ioctl(nullptr, DSM_BIND_STOP, 0); + g_dev->ioctl(nullptr, DSM_BIND_POWER_UP, 0); + close(console); + exit(0); + } + } + } +} + +void test(void) { int fd; @@ -1626,7 +1731,7 @@ test(void) int direction = 1; int ret; - fd = open("/dev/px4io", O_WRONLY); + fd = open(PX4IO_DEVICE_PATH, O_WRONLY); if (fd < 0) err(1, "failed to open device"); @@ -1800,7 +1905,7 @@ px4io_main(int argc, char *argv[]) * We can cheat and call the driver directly, as it * doesn't reference filp in ioctl() */ - g_dev->ioctl(NULL, PX4IO_INAIR_RESTART_ENABLE, 1); + g_dev->ioctl(nullptr, PX4IO_INAIR_RESTART_ENABLE, 1); } else { errx(1, "not loaded"); } @@ -1844,7 +1949,7 @@ px4io_main(int argc, char *argv[]) /* we can cheat and call the driver directly, as it * doesn't reference filp in ioctl() */ - int ret = g_dev->ioctl(NULL, PX4IO_SET_DEBUG, level); + int ret = g_dev->ioctl(nullptr, PX4IO_SET_DEBUG, level); if (ret != 0) { printf("SET_DEBUG failed - %d\n", ret); exit(1); @@ -1918,6 +2023,9 @@ px4io_main(int argc, char *argv[]) if (!strcmp(argv[1], "monitor")) monitor(); + if (!strcmp(argv[1], "bind")) + bind(argc, argv); + out: - errx(1, "need a command, try 'start', 'stop', 'status', 'test', 'monitor', 'debug', 'recovery', 'limit', 'current', 'failsafe' or 'update'"); + errx(1, "need a command, try 'start', 'stop', 'status', 'test', 'monitor', 'debug', 'recovery', 'limit', 'current', 'failsafe', 'bind', or 'update'"); } diff --git a/src/modules/att_pos_estimator_ekf/KalmanNav.cpp b/src/modules/att_pos_estimator_ekf/KalmanNav.cpp index 97d7fdd75..191d20f30 100644 --- a/src/modules/att_pos_estimator_ekf/KalmanNav.cpp +++ b/src/modules/att_pos_estimator_ekf/KalmanNav.cpp @@ -661,10 +661,10 @@ int KalmanNav::correctPos() Vector y(6); y(0) = _gps.vel_n_m_s - vN; y(1) = _gps.vel_e_m_s - vE; - y(2) = double(_gps.lat) - lat * 1.0e7 * M_RAD_TO_DEG; - y(3) = double(_gps.lon) - lon * 1.0e7 * M_RAD_TO_DEG; - y(4) = double(_gps.alt) / 1.0e3 - alt; - y(5) = double(_sensors.baro_alt_meter) - alt; + y(2) = double(_gps.lat) - double(lat) * 1.0e7 * M_RAD_TO_DEG; + y(3) = double(_gps.lon) - double(lon) * 1.0e7 * M_RAD_TO_DEG; + y(4) = _gps.alt / 1.0e3f - alt; + y(5) = _sensors.baro_alt_meter - alt; // compute correction // http://en.wikipedia.org/wiki/Extended_Kalman_filter @@ -698,7 +698,7 @@ int KalmanNav::correctPos() vD += xCorrect(VD); lat += double(xCorrect(LAT)); lon += double(xCorrect(LON)); - alt += double(xCorrect(ALT)); + alt += xCorrect(ALT); // update state covariance // http://en.wikipedia.org/wiki/Extended_Kalman_filter @@ -710,7 +710,7 @@ int KalmanNav::correctPos() static int counter = 0; if (beta > _faultPos.get() && (counter % 10 == 0)) { warnx("fault in gps: beta = %8.4f", (double)beta); - warnx("Y/N: vN: %8.4f, vE: %8.4f, lat: %8.4f, lon: %8.4f, alt: %8.4f", + warnx("Y/N: vN: %8.4f, vE: %8.4f, lat: %8.4f, lon: %8.4f, alt: %8.4f, baro: %8.4f", double(y(0) / sqrtf(RPos(0, 0))), double(y(1) / sqrtf(RPos(1, 1))), double(y(2) / sqrtf(RPos(2, 2))), diff --git a/src/modules/attitude_estimator_ekf/attitude_estimator_ekf_params.c b/src/modules/attitude_estimator_ekf/attitude_estimator_ekf_params.c index 7d3812abd..52dac652b 100755 --- a/src/modules/attitude_estimator_ekf/attitude_estimator_ekf_params.c +++ b/src/modules/attitude_estimator_ekf/attitude_estimator_ekf_params.c @@ -44,42 +44,42 @@ /* Extended Kalman Filter covariances */ /* gyro process noise */ -PARAM_DEFINE_FLOAT(EKF_ATT_V2_Q0, 1e-4f); -PARAM_DEFINE_FLOAT(EKF_ATT_V2_Q1, 0.08f); -PARAM_DEFINE_FLOAT(EKF_ATT_V2_Q2, 0.009f); +PARAM_DEFINE_FLOAT(EKF_ATT_V3_Q0, 1e-4f); +PARAM_DEFINE_FLOAT(EKF_ATT_V3_Q1, 0.08f); +PARAM_DEFINE_FLOAT(EKF_ATT_V3_Q2, 0.009f); /* gyro offsets process noise */ -PARAM_DEFINE_FLOAT(EKF_ATT_V2_Q3, 0.005f); -PARAM_DEFINE_FLOAT(EKF_ATT_V2_Q4, 0.0f); +PARAM_DEFINE_FLOAT(EKF_ATT_V3_Q3, 0.005f); +PARAM_DEFINE_FLOAT(EKF_ATT_V3_Q4, 0.0f); /* gyro measurement noise */ -PARAM_DEFINE_FLOAT(EKF_ATT_V2_R0, 0.0008f); -PARAM_DEFINE_FLOAT(EKF_ATT_V2_R1, 0.8f); -PARAM_DEFINE_FLOAT(EKF_ATT_V2_R2, 1.0f); +PARAM_DEFINE_FLOAT(EKF_ATT_V3_R0, 0.0008f); +PARAM_DEFINE_FLOAT(EKF_ATT_V3_R1, 10000.0f); +PARAM_DEFINE_FLOAT(EKF_ATT_V3_R2, 1.0f); /* accelerometer measurement noise */ -PARAM_DEFINE_FLOAT(EKF_ATT_V2_R3, 0.0f); +PARAM_DEFINE_FLOAT(EKF_ATT_V3_R3, 0.0f); /* offsets in roll, pitch and yaw of sensor plane and body */ -PARAM_DEFINE_FLOAT(ATT_ROLL_OFFS, 0.0f); -PARAM_DEFINE_FLOAT(ATT_PITCH_OFFS, 0.0f); -PARAM_DEFINE_FLOAT(ATT_YAW_OFFS, 0.0f); +PARAM_DEFINE_FLOAT(ATT_ROLL_OFF3, 0.0f); +PARAM_DEFINE_FLOAT(ATT_PITCH_OFF3, 0.0f); +PARAM_DEFINE_FLOAT(ATT_YAW_OFF3, 0.0f); int parameters_init(struct attitude_estimator_ekf_param_handles *h) { /* PID parameters */ - h->q0 = param_find("EKF_ATT_V2_Q0"); - h->q1 = param_find("EKF_ATT_V2_Q1"); - h->q2 = param_find("EKF_ATT_V2_Q2"); - h->q3 = param_find("EKF_ATT_V2_Q3"); - h->q4 = param_find("EKF_ATT_V2_Q4"); + h->q0 = param_find("EKF_ATT_V3_Q0"); + h->q1 = param_find("EKF_ATT_V3_Q1"); + h->q2 = param_find("EKF_ATT_V3_Q2"); + h->q3 = param_find("EKF_ATT_V3_Q3"); + h->q4 = param_find("EKF_ATT_V3_Q4"); - h->r0 = param_find("EKF_ATT_V2_R0"); - h->r1 = param_find("EKF_ATT_V2_R1"); - h->r2 = param_find("EKF_ATT_V2_R2"); - h->r3 = param_find("EKF_ATT_V2_R3"); + h->r0 = param_find("EKF_ATT_V3_R0"); + h->r1 = param_find("EKF_ATT_V3_R1"); + h->r2 = param_find("EKF_ATT_V3_R2"); + h->r3 = param_find("EKF_ATT_V3_R3"); - h->roll_off = param_find("ATT_ROLL_OFFS"); - h->pitch_off = param_find("ATT_PITCH_OFFS"); - h->yaw_off = param_find("ATT_YAW_OFFS"); + h->roll_off = param_find("ATT_ROLL_OFF3"); + h->pitch_off = param_find("ATT_PITCH_OFF3"); + h->yaw_off = param_find("ATT_YAW_OFF3"); return OK; } diff --git a/src/modules/commander/commander.c b/src/modules/commander/commander.c index 67f053e22..928d9b85e 100644 --- a/src/modules/commander/commander.c +++ b/src/modules/commander/commander.c @@ -1389,6 +1389,7 @@ int commander_thread_main(int argc, char *argv[]) uint64_t start_time = hrt_absolute_time(); uint64_t failsave_ll_start_time = 0; + enum VEHICLE_MANUAL_SAS_MODE manual_sas_mode; bool state_changed = true; bool param_init_forced = true; @@ -1828,8 +1829,9 @@ int commander_thread_main(int argc, char *argv[]) } else if (sp_man.manual_sas_switch < -STICK_ON_OFF_LIMIT) { - /* bottom stick position, set altitude hold */ - current_status.manual_sas_mode = VEHICLE_MANUAL_SAS_MODE_ALTITUDE; + /* bottom stick position, set default */ + /* this MUST be mapped to extremal position to switch easy in case of emergency */ + current_status.manual_sas_mode = VEHICLE_MANUAL_SAS_MODE_ROLL_PITCH_ABS_YAW_ABS; } else if (sp_man.manual_sas_switch > STICK_ON_OFF_LIMIT) { @@ -1837,8 +1839,14 @@ int commander_thread_main(int argc, char *argv[]) current_status.manual_sas_mode = VEHICLE_MANUAL_SAS_MODE_SIMPLE; } else { - /* center stick position, set default */ - current_status.manual_sas_mode = VEHICLE_MANUAL_SAS_MODE_ROLL_PITCH_ABS_YAW_ABS; + /* center stick position, set altitude hold */ + current_status.manual_sas_mode = VEHICLE_MANUAL_SAS_MODE_ALTITUDE; + } + + if (current_status.manual_sas_mode != manual_sas_mode) { + /* publish SAS mode changes immediately */ + manual_sas_mode = current_status.manual_sas_mode; + state_changed = true; } /* @@ -1849,8 +1857,10 @@ int commander_thread_main(int argc, char *argv[]) (current_status.system_type == VEHICLE_TYPE_HEXAROTOR) || (current_status.system_type == VEHICLE_TYPE_OCTOROTOR) ) && - ((sp_man.yaw < -STICK_ON_OFF_LIMIT)) && - (sp_man.throttle < STICK_THRUST_RANGE * 0.2f)) { + current_status.flag_control_manual_enabled && + current_status.manual_sas_mode == VEHICLE_MANUAL_SAS_MODE_ROLL_PITCH_ABS_YAW_ABS && + sp_man.yaw < -STICK_ON_OFF_LIMIT && + sp_man.throttle < STICK_THRUST_RANGE * 0.1f) { if (stick_off_counter > STICK_ON_OFF_COUNTER_LIMIT) { update_state_machine_disarm(stat_pub, ¤t_status, mavlink_fd); stick_on_counter = 0; @@ -1862,7 +1872,10 @@ int commander_thread_main(int argc, char *argv[]) } /* check if left stick is in lower right position --> arm */ - if (sp_man.yaw > STICK_ON_OFF_LIMIT && sp_man.throttle < STICK_THRUST_RANGE * 0.2f) { + if (current_status.flag_control_manual_enabled && + current_status.manual_sas_mode == VEHICLE_MANUAL_SAS_MODE_ROLL_PITCH_ABS_YAW_ABS && + sp_man.yaw > STICK_ON_OFF_LIMIT && + sp_man.throttle < STICK_THRUST_RANGE * 0.1f) { if (stick_on_counter > STICK_ON_OFF_COUNTER_LIMIT) { update_state_machine_arm(stat_pub, ¤t_status, mavlink_fd); stick_on_counter = 0; diff --git a/src/modules/gpio_led/gpio_led.c b/src/modules/gpio_led/gpio_led.c index 43cbe74c7..1aef739c7 100644 --- a/src/modules/gpio_led/gpio_led.c +++ b/src/modules/gpio_led/gpio_led.c @@ -53,10 +53,12 @@ #include <uORB/topics/vehicle_status.h> #include <poll.h> #include <drivers/drv_gpio.h> +#include <modules/px4iofirmware/protocol.h> struct gpio_led_s { struct work_s work; int gpio_fd; + bool use_io; int pin; struct vehicle_status_s status; int vehicle_status_sub; @@ -75,51 +77,97 @@ void gpio_led_cycle(FAR void *arg); int gpio_led_main(int argc, char *argv[]) { - int pin = GPIO_EXT_1; - if (argc < 2) { - errx(1, "no argument provided. Try 'start' or 'stop' [-p 1/2]"); + errx(1, "usage: gpio_led {start|stop} [-p <1|2|a1|a2|r1|r2>]\n" + "\t-p\tUse pin:\n" + "\t\t1\tPX4FMU GPIO_EXT1 (default)\n" + "\t\t2\tPX4FMU GPIO_EXT2\n" + "\t\ta1\tPX4IO ACC1\n" + "\t\ta2\tPX4IO ACC2\n" + "\t\tr1\tPX4IO RELAY1\n" + "\t\tr2\tPX4IO RELAY2"); } else { - /* START COMMAND HANDLING */ if (!strcmp(argv[1], "start")) { + if (gpio_led_started) { + errx(1, "already running"); + } + + bool use_io = false; + int pin = GPIO_EXT_1; if (argc > 2) { - if (!strcmp(argv[1], "-p")) { - if (!strcmp(argv[2], "1")) { + if (!strcmp(argv[2], "-p")) { + if (!strcmp(argv[3], "1")) { + use_io = false; pin = GPIO_EXT_1; - } else if (!strcmp(argv[2], "2")) { + } else if (!strcmp(argv[3], "2")) { + use_io = false; pin = GPIO_EXT_2; + } else if (!strcmp(argv[3], "a1")) { + use_io = true; + pin = PX4IO_ACC1; + + } else if (!strcmp(argv[3], "a2")) { + use_io = true; + pin = PX4IO_ACC2; + + } else if (!strcmp(argv[3], "r1")) { + use_io = true; + pin = PX4IO_RELAY1; + + } else if (!strcmp(argv[3], "r2")) { + use_io = true; + pin = PX4IO_RELAY2; + } else { - warnx("[gpio_led] Unsupported pin: %s\n", argv[2]); - exit(1); + errx(1, "unsupported pin: %s", argv[3]); } } } memset(&gpio_led_data, 0, sizeof(gpio_led_data)); + gpio_led_data.use_io = use_io; gpio_led_data.pin = pin; int ret = work_queue(LPWORK, &gpio_led_data.work, gpio_led_start, &gpio_led_data, 0); if (ret != 0) { - warnx("[gpio_led] Failed to queue work: %d\n", ret); - exit(1); + errx(1, "failed to queue work: %d", ret); } else { gpio_led_started = true; + char pin_name[24]; + + if (use_io) { + if (pin & (PX4IO_ACC1 | PX4IO_ACC2)) { + sprintf(pin_name, "PX4IO ACC%i", (pin >> 3)); + + } else { + sprintf(pin_name, "PX4IO RELAY%i", pin); + } + + } else { + sprintf(pin_name, "PX4FMU GPIO_EXT%i", pin); + + } + + warnx("start, using pin: %s", pin_name); } exit(0); - /* STOP COMMAND HANDLING */ } else if (!strcmp(argv[1], "stop")) { - gpio_led_started = false; + if (gpio_led_started) { + gpio_led_started = false; + warnx("stop"); - /* INVALID COMMAND */ + } else { + errx(1, "not running"); + } } else { errx(1, "unrecognized command '%s', only supporting 'start' or 'stop'", argv[1]); @@ -131,15 +179,26 @@ void gpio_led_start(FAR void *arg) { FAR struct gpio_led_s *priv = (FAR struct gpio_led_s *)arg; + char *gpio_dev; + + if (priv->use_io) { + gpio_dev = PX4IO_DEVICE_PATH; + } else { + gpio_dev = PX4FMU_DEVICE_PATH; + } + /* open GPIO device */ - priv->gpio_fd = open(GPIO_DEVICE_PATH, 0); + priv->gpio_fd = open(gpio_dev, 0); if (priv->gpio_fd < 0) { - warnx("[gpio_led] GPIO: open fail\n"); + // TODO find way to print errors + //printf("gpio_led: GPIO device \"%s\" open fail\n", gpio_dev); + gpio_led_started = false; return; } /* configure GPIO pin */ + /* px4fmu only, px4io doesn't support GPIO_SET_OUTPUT and will ignore */ ioctl(priv->gpio_fd, GPIO_SET_OUTPUT, priv->pin); /* subscribe to vehicle status topic */ @@ -150,11 +209,11 @@ void gpio_led_start(FAR void *arg) int ret = work_queue(LPWORK, &priv->work, gpio_led_cycle, priv, 0); if (ret != 0) { - warnx("[gpio_led] Failed to queue work: %d\n", ret); + // TODO find way to print errors + //printf("gpio_led: failed to queue work: %d\n", ret); + gpio_led_started = false; return; } - - warnx("[gpio_led] Started, using pin GPIO_EXT%i\n", priv->pin); } void gpio_led_cycle(FAR void *arg) @@ -200,7 +259,6 @@ void gpio_led_cycle(FAR void *arg) if (led_state_new) { ioctl(priv->gpio_fd, GPIO_SET, priv->pin); - } else { ioctl(priv->gpio_fd, GPIO_CLEAR, priv->pin); } @@ -211,7 +269,12 @@ void gpio_led_cycle(FAR void *arg) if (priv->counter > 5) priv->counter = 0; - /* repeat cycle at 5 Hz*/ - if (gpio_led_started) + /* repeat cycle at 5 Hz */ + if (gpio_led_started) { work_queue(LPWORK, &priv->work, gpio_led_cycle, priv, USEC2TICK(200000)); + + } else { + /* switch off LED on stop */ + ioctl(priv->gpio_fd, GPIO_CLEAR, priv->pin); + } } diff --git a/src/modules/mavlink/waypoints.c b/src/modules/mavlink/waypoints.c index 405046750..eea928a17 100644 --- a/src/modules/mavlink/waypoints.c +++ b/src/modules/mavlink/waypoints.c @@ -373,7 +373,7 @@ void check_waypoints_reached(uint64_t now, const struct vehicle_global_position_ dist = mavlink_wpm_distance_to_point_global_wgs84(wpm->current_active_wp_id, (float)global_pos->lat * 1e-7f, (float)global_pos->lon * 1e-7f, global_pos->alt); } else if (coordinate_frame == (int)MAV_FRAME_GLOBAL_RELATIVE_ALT) { - dist = mavlink_wpm_distance_to_point_global_wgs84(wpm->current_active_wp_id, global_pos->lat, global_pos->lon, global_pos->relative_alt); + dist = mavlink_wpm_distance_to_point_global_wgs84(wpm->current_active_wp_id, (float)global_pos->lat * 1e-7f, (float)global_pos->lon * 1e-7f, global_pos->relative_alt); } else if (coordinate_frame == (int)MAV_FRAME_LOCAL_ENU || coordinate_frame == (int)MAV_FRAME_LOCAL_NED) { dist = mavlink_wpm_distance_to_point_local(wpm->current_active_wp_id, local_pos->x, local_pos->y, local_pos->z); diff --git a/src/modules/px4iofirmware/controls.c b/src/modules/px4iofirmware/controls.c index 3cf9ca149..43d96fb06 100644 --- a/src/modules/px4iofirmware/controls.c +++ b/src/modules/px4iofirmware/controls.c @@ -95,9 +95,16 @@ controls_tick() { */ perf_begin(c_gather_dsm); - bool dsm_updated = dsm_input(r_raw_rc_values, &r_raw_rc_count); - if (dsm_updated) + uint16_t temp_count = r_raw_rc_count; + bool dsm_updated = dsm_input(r_raw_rc_values, &temp_count); + if (dsm_updated) { r_status_flags |= PX4IO_P_STATUS_FLAGS_RC_DSM; + r_raw_rc_count = temp_count & 0x7fff; + if (temp_count & 0x8000) + r_status_flags |= PX4IO_P_STATUS_FLAGS_RC_DSM11; + else + r_status_flags &= ~PX4IO_P_STATUS_FLAGS_RC_DSM11; + } perf_end(c_gather_dsm); perf_begin(c_gather_sbus); diff --git a/src/modules/px4iofirmware/dsm.c b/src/modules/px4iofirmware/dsm.c index ea35e5513..ab6e3fec4 100644 --- a/src/modules/px4iofirmware/dsm.c +++ b/src/modules/px4iofirmware/dsm.c @@ -40,6 +40,7 @@ */ #include <nuttx/config.h> +#include <nuttx/arch.h> #include <fcntl.h> #include <unistd.h> @@ -101,6 +102,41 @@ dsm_init(const char *device) return dsm_fd; } +void +dsm_bind(uint16_t cmd, int pulses) +{ + const uint32_t usart1RxAsOutp = GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN10; + + if (dsm_fd < 0) + return; + + switch (cmd) { + case dsm_bind_power_down: + // power down DSM satellite + POWER_RELAY1(0); + break; + case dsm_bind_power_up: + POWER_RELAY1(1); + dsm_guess_format(true); + break; + case dsm_bind_set_rx_out: + stm32_configgpio(usart1RxAsOutp); + break; + case dsm_bind_send_pulses: + for (int i = 0; i < pulses; i++) { + stm32_gpiowrite(usart1RxAsOutp, false); + up_udelay(50); + stm32_gpiowrite(usart1RxAsOutp, true); + up_udelay(50); + } + break; + case dsm_bind_reinit_uart: + // Restore USART rx pin + stm32_configgpio(GPIO_USART1_RX); + break; + } +} + bool dsm_input(uint16_t *values, uint16_t *num_values) { @@ -218,7 +254,7 @@ dsm_guess_format(bool reset) /* * Iterate the set of sensible sniffed channel sets and see whether - * decoding in 10 or 11-bit mode has yielded anything we recognise. + * decoding in 10 or 11-bit mode has yielded anything we recognize. * * XXX Note that due to what seem to be bugs in the DSM2 high-resolution * stream, we may want to sniff for longer in some cases when we think we @@ -349,6 +385,9 @@ dsm_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values) values[channel] = value; } + if (channel_shift == 11) + *num_values |= 0x8000; + /* * XXX Note that we may be in failsafe here; we need to work out how to detect that. */ diff --git a/src/modules/px4iofirmware/protocol.h b/src/modules/px4iofirmware/protocol.h index 674f9dddd..88d8cc87c 100644 --- a/src/modules/px4iofirmware/protocol.h +++ b/src/modules/px4iofirmware/protocol.h @@ -105,6 +105,7 @@ #define PX4IO_P_STATUS_FLAGS_ARM_SYNC (1 << 9) /* the arming state between IO and FMU is in sync */ #define PX4IO_P_STATUS_FLAGS_INIT_OK (1 << 10) /* initialisation of the IO completed without error */ #define PX4IO_P_STATUS_FLAGS_FAILSAFE (1 << 11) /* failsafe is active */ +#define PX4IO_P_STATUS_FLAGS_RC_DSM11 (1 << 12) /* DSM input is 11 bit data */ #define PX4IO_P_STATUS_ALARMS 3 /* alarm flags - alarms latch, write 1 to a bit to clear it */ #define PX4IO_P_STATUS_ALARMS_VBATT_LOW (1 << 0) /* VBatt is very close to regulator dropout */ @@ -156,7 +157,22 @@ #define PX4IO_P_SETUP_PWM_DEFAULTRATE 3 /* 'low' PWM frame output rate in Hz */ #define PX4IO_P_SETUP_PWM_ALTRATE 4 /* 'high' PWM frame output rate in Hz */ #define PX4IO_P_SETUP_RELAYS 5 /* bitmask of relay/switch outputs, 0 = off, 1 = on */ + +/* px4io relay bit definitions */ +#define PX4IO_RELAY1 (1<<0) +#define PX4IO_RELAY2 (1<<1) +#define PX4IO_ACC1 (1<<2) +#define PX4IO_ACC2 (1<<3) + #define PX4IO_P_SETUP_VBATT_SCALE 6 /* battery voltage correction factor (float) */ +#define PX4IO_P_SETUP_DSM 7 /* DSM bind state */ +enum { /* DSM bind states */ + dsm_bind_power_down = 0, + dsm_bind_power_up, + dsm_bind_set_rx_out, + dsm_bind_send_pulses, + dsm_bind_reinit_uart +}; #define PX4IO_P_SETUP_SET_DEBUG 9 /* debug level for IO board */ /* autopilot control values, -10000..10000 */ diff --git a/src/modules/px4iofirmware/px4io.h b/src/modules/px4iofirmware/px4io.h index 272cdb7bf..83feeb9b6 100644 --- a/src/modules/px4iofirmware/px4io.h +++ b/src/modules/px4iofirmware/px4io.h @@ -184,6 +184,7 @@ extern void controls_init(void); extern void controls_tick(void); extern int dsm_init(const char *device); extern bool dsm_input(uint16_t *values, uint16_t *num_values); +extern void dsm_bind(uint16_t cmd, int pulses); extern int sbus_init(const char *device); extern bool sbus_input(uint16_t *values, uint16_t *num_values); diff --git a/src/modules/px4iofirmware/registers.c b/src/modules/px4iofirmware/registers.c index df7d6dcd3..a922362b6 100644 --- a/src/modules/px4iofirmware/registers.c +++ b/src/modules/px4iofirmware/registers.c @@ -349,10 +349,10 @@ registers_set_one(uint8_t page, uint8_t offset, uint16_t value) case PX4IO_P_SETUP_RELAYS: value &= PX4IO_P_SETUP_RELAYS_VALID; r_setup_relays = value; - POWER_RELAY1(value & (1 << 0) ? 1 : 0); - POWER_RELAY2(value & (1 << 1) ? 1 : 0); - POWER_ACC1(value & (1 << 2) ? 1 : 0); - POWER_ACC2(value & (1 << 3) ? 1 : 0); + POWER_RELAY1(value & PX4IO_RELAY1 ? 1 : 0); + POWER_RELAY2(value & PX4IO_RELAY2 ? 1 : 0); + POWER_ACC1(value & PX4IO_ACC1 ? 1 : 0); + POWER_ACC2(value & PX4IO_ACC2 ? 1 : 0); break; case PX4IO_P_SETUP_SET_DEBUG: @@ -360,6 +360,10 @@ registers_set_one(uint8_t page, uint8_t offset, uint16_t value) isr_debug(0, "set debug %u\n", (unsigned)r_page_setup[PX4IO_P_SETUP_SET_DEBUG]); break; + case PX4IO_P_SETUP_DSM: + dsm_bind(value & 0x0f, (value >> 4) & 7); + break; + default: return -1; } diff --git a/src/modules/sdlog2/sdlog2.c b/src/modules/sdlog2/sdlog2.c index 3e6b20472..3713e0b30 100644 --- a/src/modules/sdlog2/sdlog2.c +++ b/src/modules/sdlog2/sdlog2.c @@ -72,6 +72,7 @@ #include <uORB/topics/vehicle_local_position.h> #include <uORB/topics/vehicle_local_position_setpoint.h> #include <uORB/topics/vehicle_global_position.h> +#include <uORB/topics/vehicle_global_position_setpoint.h> #include <uORB/topics/vehicle_gps_position.h> #include <uORB/topics/vehicle_vicon_position.h> #include <uORB/topics/optical_flow.h> @@ -615,7 +616,7 @@ int sdlog2_thread_main(int argc, char *argv[]) /* --- IMPORTANT: DEFINE NUMBER OF ORB STRUCTS TO WAIT FOR HERE --- */ /* number of messages */ - const ssize_t fdsc = 18; + const ssize_t fdsc = 19; /* Sanity check variable and index */ ssize_t fdsc_count = 0; /* file descriptors to wait for */ @@ -637,6 +638,7 @@ int sdlog2_thread_main(int argc, char *argv[]) struct vehicle_local_position_s local_pos; struct vehicle_local_position_setpoint_s local_pos_sp; struct vehicle_global_position_s global_pos; + struct vehicle_global_position_setpoint_s global_pos_sp; struct vehicle_gps_position_s gps_pos; struct vehicle_vicon_position_s vicon_pos; struct optical_flow_s flow; @@ -660,6 +662,7 @@ int sdlog2_thread_main(int argc, char *argv[]) int local_pos_sub; int local_pos_sp_sub; int global_pos_sub; + int global_pos_sp_sub; int gps_pos_sub; int vicon_pos_sub; int flow_sub; @@ -689,6 +692,7 @@ int sdlog2_thread_main(int argc, char *argv[]) struct log_ARSP_s log_ARSP; struct log_FLOW_s log_FLOW; struct log_GPOS_s log_GPOS; + struct log_GPSP_s log_GPSP; struct log_ESC_s log_ESC; } body; } log_msg = { @@ -775,6 +779,12 @@ int sdlog2_thread_main(int argc, char *argv[]) fds[fdsc_count].events = POLLIN; fdsc_count++; + /* --- GLOBAL POSITION SETPOINT--- */ + subs.global_pos_sp_sub = orb_subscribe(ORB_ID(vehicle_global_position_setpoint)); + fds[fdsc_count].fd = subs.global_pos_sp_sub; + fds[fdsc_count].events = POLLIN; + fdsc_count++; + /* --- VICON POSITION --- */ subs.vicon_pos_sub = orb_subscribe(ORB_ID(vehicle_vicon_position)); fds[fdsc_count].fd = subs.vicon_pos_sub; @@ -1077,6 +1087,25 @@ int sdlog2_thread_main(int argc, char *argv[]) LOGBUFFER_WRITE_AND_COUNT(GPOS); } + /* --- GLOBAL POSITION SETPOINT --- */ + if (fds[ifds++].revents & POLLIN) { + orb_copy(ORB_ID(vehicle_global_position_setpoint), subs.global_pos_sp_sub, &buf.global_pos_sp); + log_msg.msg_type = LOG_GPSP_MSG; + log_msg.body.log_GPSP.altitude_is_relative = buf.global_pos_sp.altitude_is_relative; + log_msg.body.log_GPSP.lat = buf.global_pos_sp.lat; + log_msg.body.log_GPSP.lon = buf.global_pos_sp.lon; + log_msg.body.log_GPSP.altitude = buf.global_pos_sp.altitude; + log_msg.body.log_GPSP.yaw = buf.global_pos_sp.yaw; + log_msg.body.log_GPSP.loiter_radius = buf.global_pos_sp.loiter_radius; + log_msg.body.log_GPSP.loiter_direction = buf.global_pos_sp.loiter_direction; + log_msg.body.log_GPSP.nav_cmd = buf.global_pos_sp.nav_cmd; + log_msg.body.log_GPSP.param1 = buf.global_pos_sp.param1; + log_msg.body.log_GPSP.param2 = buf.global_pos_sp.param2; + log_msg.body.log_GPSP.param3 = buf.global_pos_sp.param3; + log_msg.body.log_GPSP.param4 = buf.global_pos_sp.param4; + LOGBUFFER_WRITE_AND_COUNT(GPSP); + } + /* --- VICON POSITION --- */ if (fds[ifds++].revents & POLLIN) { orb_copy(ORB_ID(vehicle_vicon_position), subs.vicon_pos_sub, &buf.vicon_pos); diff --git a/src/modules/sdlog2/sdlog2_messages.h b/src/modules/sdlog2/sdlog2_messages.h index abc882d23..934e4dec8 100644 --- a/src/modules/sdlog2/sdlog2_messages.h +++ b/src/modules/sdlog2/sdlog2_messages.h @@ -149,15 +149,15 @@ struct log_ATTC_s { /* --- STAT - VEHICLE STATE --- */ #define LOG_STAT_MSG 10 struct log_STAT_s { - unsigned char state; - unsigned char flight_mode; - unsigned char manual_control_mode; - unsigned char manual_sas_mode; - unsigned char armed; + uint8_t state; + uint8_t flight_mode; + uint8_t manual_control_mode; + uint8_t manual_sas_mode; + uint8_t armed; float battery_voltage; float battery_current; float battery_remaining; - unsigned char battery_warning; + uint8_t battery_warning; }; /* --- RC - RC INPUT CHANNELS --- */ @@ -210,13 +210,29 @@ struct log_GPOS_s { float vel_d; }; +/* --- GPSP - GLOBAL POSITION SETPOINT --- */ +#define LOG_GPSP_MSG 17 +struct log_GPSP_s { + uint8_t altitude_is_relative; + int32_t lat; + int32_t lon; + float altitude; + float yaw; + float loiter_radius; + int8_t loiter_direction; + uint8_t nav_cmd; + float param1; + float param2; + float param3; + float param4; +}; + /* --- ESC - ESC STATE --- */ -#define LOG_ESC_MSG 64 +#define LOG_ESC_MSG 18 struct log_ESC_s { uint16_t counter; uint8_t esc_count; uint8_t esc_connectiontype; - uint8_t esc_num; uint16_t esc_address; uint16_t esc_version; @@ -227,6 +243,7 @@ struct log_ESC_s { float esc_setpoint; uint16_t esc_setpoint_raw; }; + #pragma pack(pop) /* construct list of all message formats */ @@ -248,6 +265,7 @@ static const struct log_format_s log_formats[] = { LOG_FORMAT(ARSP, "fff", "RollRateSP,PitchRateSP,YawRateSP"), LOG_FORMAT(FLOW, "hhfffBB", "RawX,RawY,CompX,CompY,Dist,Q,SensID"), LOG_FORMAT(GPOS, "LLffff", "Lat,Lon,Alt,VelN,VelE,VelD"), + LOG_FORMAT(GPSP, "BLLfffbBffff", "AltRel,Lat,Lon,Alt,Yaw,LoiterR,LoiterDir,NavCmd,P1,P2,P3,P4"), LOG_FORMAT(ESC, "HBBBHHHHHHfH", "Counter,NumESC,Conn,No,Version,Adr,Volt,Amp,RPM,Temp,SetP,SetPRAW"), }; diff --git a/src/modules/sensors/sensor_params.c b/src/modules/sensors/sensor_params.c index f6f4d60c7..252c1b7a9 100644 --- a/src/modules/sensors/sensor_params.c +++ b/src/modules/sensors/sensor_params.c @@ -155,6 +155,7 @@ PARAM_DEFINE_FLOAT(RC14_REV, 1.0f); PARAM_DEFINE_FLOAT(RC14_DZ, 0.0f); PARAM_DEFINE_INT32(RC_TYPE, 1); /** 1 = FUTABA, 2 = Spektrum, 3 = Graupner HoTT, 4 = Turnigy 9x */ +PARAM_DEFINE_INT32(RC_RL1_DSM_VCC, 0); /* Relay 1 controls DSM VCC */ /* default is conversion factor for the PX4IO / PX4IOAR board, the factor for PX4FMU standalone is different */ PARAM_DEFINE_FLOAT(BAT_V_SCALING, (3.3f * 52.0f / 5.0f / 4095.0f)); diff --git a/src/modules/sensors/sensors.cpp b/src/modules/sensors/sensors.cpp index 1ded14a91..ae5a55109 100644 --- a/src/modules/sensors/sensors.cpp +++ b/src/modules/sensors/sensors.cpp @@ -230,6 +230,8 @@ private: float rc_scale_flaps; float battery_voltage_scaling; + + int rc_rl1_DSM_VCC_control; } _parameters; /**< local copies of interesting parameters */ struct { @@ -278,6 +280,8 @@ private: param_t rc_scale_flaps; param_t battery_voltage_scaling; + + param_t rc_rl1_DSM_VCC_control; } _parameter_handles; /**< handles for interesting parameters */ @@ -514,6 +518,9 @@ Sensors::Sensors() : _parameter_handles.battery_voltage_scaling = param_find("BAT_V_SCALING"); + /* DSM VCC relay control */ + _parameter_handles.rc_rl1_DSM_VCC_control = param_find("RC_RL1_DSM_VCC"); + /* fetch initial parameter values */ parameters_update(); } @@ -730,6 +737,11 @@ Sensors::parameters_update() warnx("Failed updating voltage scaling param"); } + /* relay 1 DSM VCC control */ + if (param_get(_parameter_handles.rc_rl1_DSM_VCC_control, &(_parameters.rc_rl1_DSM_VCC_control)) != OK) { + warnx("Failed updating relay 1 DSM VCC control"); + } + return OK; } diff --git a/src/modules/systemlib/cpuload.c b/src/modules/systemlib/cpuload.c index 8fdff8ac0..afc5b072c 100644 --- a/src/modules/systemlib/cpuload.c +++ b/src/modules/systemlib/cpuload.c @@ -71,8 +71,6 @@ extern FAR struct _TCB *sched_gettcb(pid_t pid); void cpuload_initialize_once() { -// if (!system_load.initialized) -// { system_load.start_time = hrt_absolute_time(); int i; @@ -80,27 +78,29 @@ void cpuload_initialize_once() system_load.tasks[i].valid = false; } - system_load.total_count = 0; - uint64_t now = hrt_absolute_time(); - /* initialize idle thread statically */ - system_load.tasks[0].start_time = now; - system_load.tasks[0].total_runtime = 0; - system_load.tasks[0].curr_start_time = 0; - system_load.tasks[0].tcb = sched_gettcb(0); - system_load.tasks[0].valid = true; - system_load.total_count++; - - /* initialize init thread statically */ - system_load.tasks[1].start_time = now; - system_load.tasks[1].total_runtime = 0; - system_load.tasks[1].curr_start_time = 0; - system_load.tasks[1].tcb = sched_gettcb(1); - system_load.tasks[1].valid = true; - /* count init thread */ - system_load.total_count++; - // } + int static_tasks_count = 2; // there are at least 2 threads that should be initialized statically - "idle" and "init" + +#ifdef CONFIG_PAGING + static_tasks_count++; // include paging thread in initialization +#endif /* CONFIG_PAGING */ +#if CONFIG_SCHED_WORKQUEUE + static_tasks_count++; // include high priority work0 thread in initialization +#endif /* CONFIG_SCHED_WORKQUEUE */ +#if CONFIG_SCHED_LPWORK + static_tasks_count++; // include low priority work1 thread in initialization +#endif /* CONFIG_SCHED_WORKQUEUE */ + + // perform static initialization of "system" threads + for (system_load.total_count = 0; system_load.total_count < static_tasks_count; system_load.total_count++) + { + system_load.tasks[system_load.total_count].start_time = now; + system_load.tasks[system_load.total_count].total_runtime = 0; + system_load.tasks[system_load.total_count].curr_start_time = 0; + system_load.tasks[system_load.total_count].tcb = sched_gettcb(system_load.total_count); // it is assumed that these static threads have consecutive PIDs + system_load.tasks[system_load.total_count].valid = true; + } } void sched_note_start(FAR struct tcb_s *tcb) diff --git a/src/modules/uORB/topics/vehicle_global_position_setpoint.h b/src/modules/uORB/topics/vehicle_global_position_setpoint.h index 3ae3ff28c..5c8ce1e4d 100644 --- a/src/modules/uORB/topics/vehicle_global_position_setpoint.h +++ b/src/modules/uORB/topics/vehicle_global_position_setpoint.h @@ -66,7 +66,7 @@ struct vehicle_global_position_setpoint_s float altitude; /**< altitude in meters */ float yaw; /**< in radians NED -PI..+PI */ float loiter_radius; /**< loiter radius in meters, 0 for a VTOL to hover */ - uint8_t loiter_direction; /**< 1: positive / clockwise, -1, negative. */ + int8_t loiter_direction; /**< 1: positive / clockwise, -1, negative. */ enum NAV_CMD nav_cmd; /**< true if loitering is enabled */ float param1; float param2; diff --git a/src/systemcmds/tests/test_gpio.c b/src/systemcmds/tests/test_gpio.c index ab536d956..62a873270 100644 --- a/src/systemcmds/tests/test_gpio.c +++ b/src/systemcmds/tests/test_gpio.c @@ -92,7 +92,7 @@ int test_gpio(int argc, char *argv[]) int fd; int ret = 0; - fd = open(GPIO_DEVICE_PATH, 0); + fd = open(PX4IO_DEVICE_PATH, 0); if (fd < 0) { printf("GPIO: open fail\n"); diff --git a/src/systemcmds/top/top.c b/src/systemcmds/top/top.c index efe62685c..0d064a05e 100644 --- a/src/systemcmds/top/top.c +++ b/src/systemcmds/top/top.c @@ -51,19 +51,46 @@ #include <systemlib/cpuload.h> #include <drivers/drv_hrt.h> +#define CL "\033[K" // clear line + /** * Start the top application. */ -__EXPORT int top_main(int argc, char *argv[]); +__EXPORT int top_main(void); extern struct system_load_s system_load; -bool top_sigusr1_rcvd = false; - -int top_main(int argc, char *argv[]) +static const char * +tstate_name(const tstate_t s) { - int t; + switch (s) { + case TSTATE_TASK_INVALID: return "init"; + + case TSTATE_TASK_PENDING: return "PEND"; + case TSTATE_TASK_READYTORUN: return "READY"; + case TSTATE_TASK_RUNNING: return "RUN"; + + case TSTATE_TASK_INACTIVE: return "inact"; + case TSTATE_WAIT_SEM: return "w:sem"; +#ifndef CONFIG_DISABLE_SIGNALS + case TSTATE_WAIT_SIG: return "w:sig"; +#endif +#ifndef CONFIG_DISABLE_MQUEUE + case TSTATE_WAIT_MQNOTEMPTY: return "w:mqe"; + case TSTATE_WAIT_MQNOTFULL: return "w:mqf"; +#endif +#ifdef CONFIG_PAGING + case TSTATE_WAIT_PAGEFILL: return "w:pgf"; +#endif + + default: + return "ERROR"; + } +} +int +top_main(void) +{ uint64_t total_user_time = 0; int running_count = 0; @@ -75,7 +102,7 @@ int top_main(int argc, char *argv[]) uint64_t last_times[CONFIG_MAX_TASKS]; float curr_loads[CONFIG_MAX_TASKS]; - for (t = 0; t < CONFIG_MAX_TASKS; t++) + for (int t = 0; t < CONFIG_MAX_TASKS; t++) last_times[t] = 0; float interval_time_ms_inv = 0.f; @@ -83,16 +110,16 @@ int top_main(int argc, char *argv[]) /* Open console directly to grab CTRL-C signal */ int console = open("/dev/console", O_NONBLOCK | O_RDONLY | O_NOCTTY); - while (true) -// for (t = 0; t < 10; t++) - { - int i; + /* clear screen */ + printf("\033[2J"); - uint64_t curr_time_ms = (hrt_absolute_time() / 1000LLU); - unsigned int curr_time_s = curr_time_ms / 1000LLU; + for (;;) { + int i; + uint64_t curr_time_us; + uint64_t idle_time_us; - uint64_t idle_time_total_ms = (system_load.tasks[0].total_runtime / 1000LLU); - unsigned int idle_time_total_s = idle_time_total_ms / 1000LLU; + curr_time_us = hrt_absolute_time(); + idle_time_us = system_load.tasks[0].total_runtime; if (new_time > interval_start_time) interval_time_ms_inv = 1.f / ((float)((new_time - interval_start_time) / 1000)); @@ -102,7 +129,38 @@ int top_main(int argc, char *argv[]) total_user_time = 0; for (i = 0; i < CONFIG_MAX_TASKS; i++) { - uint64_t interval_runtime = (system_load.tasks[i].valid && last_times[i] > 0 && system_load.tasks[i].total_runtime > last_times[i]) ? (system_load.tasks[i].total_runtime - last_times[i]) / 1000 : 0; + uint64_t interval_runtime; + + if (system_load.tasks[i].valid) { + switch (system_load.tasks[i].tcb->task_state) { + case TSTATE_TASK_PENDING: + case TSTATE_TASK_READYTORUN: + case TSTATE_TASK_RUNNING: + running_count++; + break; + + case TSTATE_TASK_INVALID: + case TSTATE_TASK_INACTIVE: + case TSTATE_WAIT_SEM: +#ifndef CONFIG_DISABLE_SIGNALS + case TSTATE_WAIT_SIG: +#endif +#ifndef CONFIG_DISABLE_MQUEUE + case TSTATE_WAIT_MQNOTEMPTY: + case TSTATE_WAIT_MQNOTFULL: +#endif +#ifdef CONFIG_PAGING + case TSTATE_WAIT_PAGEFILL: +#endif + blocked_count++; + break; + } + } + + interval_runtime = (system_load.tasks[i].valid && last_times[i] > 0 && + system_load.tasks[i].total_runtime > last_times[i]) + ? (system_load.tasks[i].total_runtime - last_times[i]) / 1000 + : 0; last_times[i] = system_load.tasks[i].total_runtime; @@ -111,7 +169,6 @@ int top_main(int argc, char *argv[]) if (i > 0) total_user_time += interval_runtime; - } else curr_loads[i] = 0; } @@ -119,127 +176,99 @@ int top_main(int argc, char *argv[]) for (i = 0; i < CONFIG_MAX_TASKS; i++) { if (system_load.tasks[i].valid && (new_time > interval_start_time)) { if (system_load.tasks[i].tcb->pid == 0) { - float idle = curr_loads[0]; - float task_load = (float)(total_user_time) * interval_time_ms_inv; + float idle; + float task_load; + float sched_load; - if (task_load > (1.f - idle)) task_load = (1.f - idle); /* this can happen if one tasks total runtime was not computed correctly by the scheduler instrumentation TODO */ + idle = curr_loads[0]; + task_load = (float)(total_user_time) * interval_time_ms_inv; - float sched_load = 1.f - idle - task_load; + /* this can happen if one tasks total runtime was not computed + correctly by the scheduler instrumentation TODO */ + if (task_load > (1.f - idle)) + task_load = (1.f - idle); + + sched_load = 1.f - idle - task_load; /* print system information */ - printf("\033[H"); /* cursor home */ - printf("\033[KProcesses: %d total, %d running, %d sleeping\n", system_load.total_count, running_count, blocked_count); - printf("\033[KCPU usage: %d.%02d%% tasks, %d.%02d%% sched, %d.%02d%% idle\n", (int)(task_load * 100), (int)((task_load * 10000.0f) - (int)(task_load * 100.0f) * 100), (int)(sched_load * 100), (int)((sched_load * 10000.0f) - (int)(sched_load * 100.0f) * 100), (int)(idle * 100), (int)((idle * 10000.0f) - ((int)(idle * 100)) * 100)); - printf("\033[KUptime: %u.%03u s total, %d.%03d s idle\n\033[K\n", curr_time_s, (unsigned int)(curr_time_ms - curr_time_s * 1000LLU), idle_time_total_s, (int)(idle_time_total_ms - idle_time_total_s * 1000)); - - /* 34 chars command name length (32 chars plus two spaces) */ - char header_spaces[CONFIG_TASK_NAME_SIZE + 1]; - memset(header_spaces, ' ', CONFIG_TASK_NAME_SIZE); - header_spaces[CONFIG_TASK_NAME_SIZE] = '\0'; + printf("\033[H"); /* move cursor home and clear screen */ + printf(CL "Processes: %d total, %d running, %d sleeping\n", + system_load.total_count, + running_count, + blocked_count); + printf(CL "CPU usage: %.2f%% tasks, %.2f%% sched, %.2f%% idle\n", + (double)(task_load * 100.f), + (double)(sched_load * 100.f), + (double)(idle * 100.f)); + printf(CL "Uptime: %.3fs total, %.3fs idle\n\n", + (double)curr_time_us / 1000000.d, + (double)idle_time_us / 1000000.d); + + /* header for task list */ + printf(CL "%4s %*-s %8s %6s %11s %10s %-6s\n", + "PID", + CONFIG_TASK_NAME_SIZE, "COMMAND", + "CPU(ms)", + "CPU(%)", + "USED/STACK", + "PRIO(BASE)", #if CONFIG_RR_INTERVAL > 0 - printf("\033[KPID\tCOMMAND%s CPU TOTAL \t%%CPU CURR \tSTACK USE\tCURR (BASE) PRIO\tRR SLICE\n", header_spaces); + "TSLICE" #else - printf("\033[KPID\tCOMMAND%s CPU TOTAL \t%%CPU CURR \tSTACK USE\tCURR (BASE) PRIO\n", header_spaces); -#endif - - } else { - enum tstate_e task_state = (enum tstate_e)system_load.tasks[i].tcb->task_state; - - if (task_state == TSTATE_TASK_PENDING || - task_state == TSTATE_TASK_READYTORUN || - task_state == TSTATE_TASK_RUNNING) { - running_count++; - } - - if (task_state == TSTATE_TASK_INACTIVE || /* BLOCKED - Initialized but not yet activated */ - task_state == TSTATE_WAIT_SEM /* BLOCKED - Waiting for a semaphore */ -#ifndef CONFIG_DISABLE_SIGNALS - || task_state == TSTATE_WAIT_SIG /* BLOCKED - Waiting for a signal */ + "STATE" #endif -#ifndef CONFIG_DISABLE_MQUEUE - || task_state == TSTATE_WAIT_MQNOTEMPTY /* BLOCKED - Waiting for a MQ to become not empty. */ - || task_state == TSTATE_WAIT_MQNOTFULL /* BLOCKED - Waiting for a MQ to become not full. */ -#endif -#ifdef CONFIG_PAGING - || task_state == TSTATE_WAIT_PAGEFILL /* BLOCKED - Waiting for page fill */ -#endif - ) { - blocked_count++; - } - - char spaces[CONFIG_TASK_NAME_SIZE + 2]; - - /* count name len */ - int namelen = 0; - - while (namelen < CONFIG_TASK_NAME_SIZE) { - if (system_load.tasks[i].tcb->name[namelen] == '\0') break; - - namelen++; - } - - int s = 0; - - for (s = 0; s < CONFIG_TASK_NAME_SIZE + 2 - namelen; s++) { - spaces[s] = ' '; - } - - spaces[s] = '\0'; - - char *runtime_spaces = " "; + ); + } - if ((system_load.tasks[i].total_runtime / 1000) < 99) { - runtime_spaces = ""; - } + unsigned stack_size = (uintptr_t)system_load.tasks[i].tcb->adj_stack_ptr - + (uintptr_t)system_load.tasks[i].tcb->stack_alloc_ptr; + unsigned stack_free = 0; + uint8_t *stack_sweeper = (uint8_t *)system_load.tasks[i].tcb->stack_alloc_ptr; - unsigned stack_size = (uintptr_t)system_load.tasks[i].tcb->adj_stack_ptr - - (uintptr_t)system_load.tasks[i].tcb->stack_alloc_ptr; - unsigned stack_free = 0; - uint8_t *stack_sweeper = (uint8_t *)system_load.tasks[i].tcb->stack_alloc_ptr; + while (stack_free < stack_size) { + if (*stack_sweeper++ != 0xff) + break; - while (stack_free < stack_size) { - if (*stack_sweeper++ != 0xff) - break; + stack_free++; + } - stack_free++; - } + printf(CL "%4d %*-s %8lld %2d.%03d %5u/%5u %3u (%3u) ", + system_load.tasks[i].tcb->pid, + CONFIG_TASK_NAME_SIZE, system_load.tasks[i].tcb->name, + (system_load.tasks[i].total_runtime / 1000), + (int)(curr_loads[i] * 100), + (int)(curr_loads[i] * 100000.0f - (int)(curr_loads[i] * 1000.0f) * 100), + stack_size - stack_free, + stack_size, + system_load.tasks[i].tcb->sched_priority, + system_load.tasks[i].tcb->base_priority); - printf("\033[K % 2d\t%s%s % 8lld ms%s \t % 2d.%03d \t % 4u / % 4u", - (int)system_load.tasks[i].tcb->pid, - system_load.tasks[i].tcb->name, - spaces, - (system_load.tasks[i].total_runtime / 1000), - runtime_spaces, - (int)(curr_loads[i] * 100), - (int)(curr_loads[i] * 100000.0f - (int)(curr_loads[i] * 1000.0f) * 100), - stack_size - stack_free, - stack_size); - /* Print scheduling info with RR time slice */ #if CONFIG_RR_INTERVAL > 0 - printf("\t%d\t(%d)\t\t%d\n", (int)system_load.tasks[i].tcb->sched_priority, (int)system_load.tasks[i].tcb->base_priority, (int)system_load.tasks[i].tcb->timeslice); + /* print scheduling info with RR time slice */ + printf(" %6d\n", system_load.tasks[i].tcb->timeslice); #else - /* Print scheduling info without time slice*/ - printf("\t%d (%d)\n", (int)system_load.tasks[i].tcb->sched_priority, (int)system_load.tasks[i].tcb->base_priority); + // print task state instead + printf(" %-6s\n", tstate_name(system_load.tasks[i].tcb->task_state)); #endif - } } } - printf("\033[K[ Hit Ctrl-C to quit. ]\n\033[J"); - fflush(stdout); - interval_start_time = new_time; - char c; - - /* Sleep 200 ms waiting for user input four times */ + /* Sleep 200 ms waiting for user input five times ~ 1s */ /* XXX use poll ... */ - for (int k = 0; k < 4; k++) { + for (int k = 0; k < 5; k++) { + char c; + if (read(console, &c, 1) == 1) { - if (c == 0x03 || c == 0x63) { - printf("Abort\n"); + switch (c) { + case 0x03: // ctrl-c + case 0x1b: // esc + case 'c': + case 'q': close(console); return OK; + /* not reached */ } } |