diff options
author | Thomas Gubler <thomasgubler@gmail.com> | 2014-01-11 00:49:30 +0100 |
---|---|---|
committer | Thomas Gubler <thomasgubler@gmail.com> | 2014-01-11 00:49:30 +0100 |
commit | f224374ed3c84717b8c92a3f0d6d902c5701eb04 (patch) | |
tree | ceac332161dccf395126da4c758f7474be3f9c5d /src | |
parent | ac7787e2a2a2439a5fa47755dda3f775568330dd (diff) | |
parent | 6604d7b9479df29227797d47aee35db27e88865c (diff) | |
download | px4-firmware-f224374ed3c84717b8c92a3f0d6d902c5701eb04.tar.gz px4-firmware-f224374ed3c84717b8c92a3f0d6d902c5701eb04.tar.bz2 px4-firmware-f224374ed3c84717b8c92a3f0d6d902c5701eb04.zip |
Merge remote-tracking branch 'upstream/master' into navigator_new
Diffstat (limited to 'src')
28 files changed, 1654 insertions, 164 deletions
diff --git a/src/drivers/boards/px4fmu-v1/board_config.h b/src/drivers/boards/px4fmu-v1/board_config.h index 6f7166284..02c26b5c0 100644 --- a/src/drivers/boards/px4fmu-v1/board_config.h +++ b/src/drivers/boards/px4fmu-v1/board_config.h @@ -60,6 +60,7 @@ __BEGIN_DECLS /* PX4IO connection configuration */ #define PX4IO_SERIAL_DEVICE "/dev/ttyS2" +#define UDID_START 0x1FFF7A10 //#ifdef CONFIG_STM32_SPI2 //# error "SPI2 is not supported on this board" diff --git a/src/drivers/boards/px4fmu-v2/board_config.h b/src/drivers/boards/px4fmu-v2/board_config.h index a19ed9d24..4972e6914 100644 --- a/src/drivers/boards/px4fmu-v2/board_config.h +++ b/src/drivers/boards/px4fmu-v2/board_config.h @@ -52,6 +52,8 @@ __BEGIN_DECLS /* these headers are not C++ safe */ #include <stm32.h> #include <arch/board/board.h> + +#define UDID_START 0x1FFF7A10 /**************************************************************************************************** * Definitions diff --git a/src/drivers/boards/px4fmu-v2/px4fmu2_init.c b/src/drivers/boards/px4fmu-v2/px4fmu2_init.c index 269ec238e..71414d62c 100644 --- a/src/drivers/boards/px4fmu-v2/px4fmu2_init.c +++ b/src/drivers/boards/px4fmu-v2/px4fmu2_init.c @@ -282,7 +282,7 @@ __EXPORT int nsh_archinitialize(void) SPI_SELECT(spi1, PX4_SPIDEV_MPU, false); up_udelay(20); - message("[boot] Successfully initialized SPI port 1\n"); + message("[boot] Initialized SPI port 1 (SENSORS)\n"); /* Get the SPI port for the FRAM */ @@ -294,20 +294,23 @@ __EXPORT int nsh_archinitialize(void) return -ENODEV; } - /* Default SPI2 to 37.5 MHz (F4 max) and de-assert the known chip selects. */ - SPI_SETFREQUENCY(spi2, 375000000); + /* Default SPI2 to 37.5 MHz (40 MHz rounded to nearest valid divider, F4 max) + * and de-assert the known chip selects. */ + + // XXX start with 10.4 MHz in FRAM usage and go up to 37.5 once validated + SPI_SETFREQUENCY(spi2, 12 * 1000 * 1000); SPI_SETBITS(spi2, 8); SPI_SETMODE(spi2, SPIDEV_MODE3); SPI_SELECT(spi2, SPIDEV_FLASH, false); - message("[boot] Successfully initialized SPI port 2\n"); + message("[boot] Initialized SPI port 2 (RAMTRON FRAM)\n"); #ifdef CONFIG_MMCSD /* First, get an instance of the SDIO interface */ sdio = sdio_initialize(CONFIG_NSH_MMCSDSLOTNO); if (!sdio) { - message("nsh_archinitialize: Failed to initialize SDIO slot %d\n", + message("[boot] Failed to initialize SDIO slot %d\n", CONFIG_NSH_MMCSDSLOTNO); return -ENODEV; } @@ -315,7 +318,7 @@ __EXPORT int nsh_archinitialize(void) /* Now bind the SDIO interface to the MMC/SD driver */ int ret = mmcsd_slotinitialize(CONFIG_NSH_MMCSDMINOR, sdio); if (ret != OK) { - message("nsh_archinitialize: Failed to bind SDIO to the MMC/SD driver: %d\n", ret); + message("[boot] Failed to bind SDIO to the MMC/SD driver: %d\n", ret); return ret; } diff --git a/src/drivers/frsky_telemetry/frsky_data.c b/src/drivers/frsky_telemetry/frsky_data.c new file mode 100644 index 000000000..63b2d2d29 --- /dev/null +++ b/src/drivers/frsky_telemetry/frsky_data.c @@ -0,0 +1,289 @@ +/**************************************************************************** + * + * Copyright (c) 2013-2014 PX4 Development Team. All rights reserved. + * Author: Stefan Rado <px4@sradonia.net> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file frsky_data.c + * @author Stefan Rado <px4@sradonia.net> + * + * FrSky telemetry implementation. + * + */ + +#include "frsky_data.h" + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> +#include <arch/math.h> +#include <geo/geo.h> + +#include <uORB/topics/battery_status.h> +#include <uORB/topics/sensor_combined.h> +#include <uORB/topics/vehicle_global_position.h> +#include <uORB/topics/vehicle_status.h> + +/* FrSky sensor hub data IDs */ +#define FRSKY_ID_GPS_ALT_BP 0x01 +#define FRSKY_ID_TEMP1 0x02 +#define FRSKY_ID_RPM 0x03 +#define FRSKY_ID_FUEL 0x04 +#define FRSKY_ID_TEMP2 0x05 +#define FRSKY_ID_VOLTS 0x06 +#define FRSKY_ID_GPS_ALT_AP 0x09 +#define FRSKY_ID_BARO_ALT_BP 0x10 +#define FRSKY_ID_GPS_SPEED_BP 0x11 +#define FRSKY_ID_GPS_LONG_BP 0x12 +#define FRSKY_ID_GPS_LAT_BP 0x13 +#define FRSKY_ID_GPS_COURS_BP 0x14 +#define FRSKY_ID_GPS_DAY_MONTH 0x15 +#define FRSKY_ID_GPS_YEAR 0x16 +#define FRSKY_ID_GPS_HOUR_MIN 0x17 +#define FRSKY_ID_GPS_SEC 0x18 +#define FRSKY_ID_GPS_SPEED_AP 0x19 +#define FRSKY_ID_GPS_LONG_AP 0x1A +#define FRSKY_ID_GPS_LAT_AP 0x1B +#define FRSKY_ID_GPS_COURS_AP 0x1C +#define FRSKY_ID_BARO_ALT_AP 0x21 +#define FRSKY_ID_GPS_LONG_EW 0x22 +#define FRSKY_ID_GPS_LAT_NS 0x23 +#define FRSKY_ID_ACCEL_X 0x24 +#define FRSKY_ID_ACCEL_Y 0x25 +#define FRSKY_ID_ACCEL_Z 0x26 +#define FRSKY_ID_CURRENT 0x28 +#define FRSKY_ID_VARIO 0x30 +#define FRSKY_ID_VFAS 0x39 +#define FRSKY_ID_VOLTS_BP 0x3A +#define FRSKY_ID_VOLTS_AP 0x3B + +#define frac(f) (f - (int)f) + +static int battery_sub = -1; +static int sensor_sub = -1; +static int global_position_sub = -1; +static int vehicle_status_sub = -1; + +/** + * Initializes the uORB subscriptions. + */ +void frsky_init() +{ + battery_sub = orb_subscribe(ORB_ID(battery_status)); + global_position_sub = orb_subscribe(ORB_ID(vehicle_global_position)); + sensor_sub = orb_subscribe(ORB_ID(sensor_combined)); + vehicle_status_sub = orb_subscribe(ORB_ID(vehicle_status)); +} + +/** + * Sends a 0x5E start/stop byte. + */ +static void frsky_send_startstop(int uart) +{ + static const uint8_t c = 0x5E; + write(uart, &c, sizeof(c)); +} + +/** + * Sends one byte, performing byte-stuffing if necessary. + */ +static void frsky_send_byte(int uart, uint8_t value) +{ + const uint8_t x5E[] = { 0x5D, 0x3E }; + const uint8_t x5D[] = { 0x5D, 0x3D }; + + switch (value) { + case 0x5E: + write(uart, x5E, sizeof(x5E)); + break; + + case 0x5D: + write(uart, x5D, sizeof(x5D)); + break; + + default: + write(uart, &value, sizeof(value)); + break; + } +} + +/** + * Sends one data id/value pair. + */ +static void frsky_send_data(int uart, uint8_t id, int16_t data) +{ + /* Cast data to unsigned, because signed shift might behave incorrectly */ + uint16_t udata = data; + + frsky_send_startstop(uart); + + frsky_send_byte(uart, id); + frsky_send_byte(uart, udata); /* LSB */ + frsky_send_byte(uart, udata >> 8); /* MSB */ +} + +/** + * Sends frame 1 (every 200ms): + * acceleration values, barometer altitude, temperature, battery voltage & current + */ +void frsky_send_frame1(int uart) +{ + /* get a local copy of the current sensor values */ + struct sensor_combined_s raw; + memset(&raw, 0, sizeof(raw)); + orb_copy(ORB_ID(sensor_combined), sensor_sub, &raw); + + /* get a local copy of the battery data */ + struct battery_status_s battery; + memset(&battery, 0, sizeof(battery)); + orb_copy(ORB_ID(battery_status), battery_sub, &battery); + + /* send formatted frame */ + frsky_send_data(uart, FRSKY_ID_ACCEL_X, + roundf(raw.accelerometer_m_s2[0] * 1000.0f)); + frsky_send_data(uart, FRSKY_ID_ACCEL_Y, + roundf(raw.accelerometer_m_s2[1] * 1000.0f)); + frsky_send_data(uart, FRSKY_ID_ACCEL_Z, + roundf(raw.accelerometer_m_s2[2] * 1000.0f)); + + frsky_send_data(uart, FRSKY_ID_BARO_ALT_BP, + raw.baro_alt_meter); + frsky_send_data(uart, FRSKY_ID_BARO_ALT_AP, + roundf(frac(raw.baro_alt_meter) * 100.0f)); + + frsky_send_data(uart, FRSKY_ID_TEMP1, + roundf(raw.baro_temp_celcius)); + + frsky_send_data(uart, FRSKY_ID_VFAS, + roundf(battery.voltage_v * 10.0f)); + frsky_send_data(uart, FRSKY_ID_CURRENT, + (battery.current_a < 0) ? 0 : roundf(battery.current_a * 10.0f)); + + frsky_send_startstop(uart); +} + +/** + * Formats the decimal latitude/longitude to the required degrees/minutes/seconds. + */ +static float frsky_format_gps(float dec) +{ + float dms_deg = (int) dec; + float dec_deg = dec - dms_deg; + float dms_min = (int) (dec_deg * 60); + float dec_min = (dec_deg * 60) - dms_min; + float dms_sec = dec_min * 60; + + return (dms_deg * 100.0f) + dms_min + (dms_sec / 100.0f); +} + +/** + * Sends frame 2 (every 1000ms): + * GPS course, latitude, longitude, ground speed, GPS altitude, remaining battery level + */ +void frsky_send_frame2(int uart) +{ + /* get a local copy of the global position data */ + struct vehicle_global_position_s global_pos; + memset(&global_pos, 0, sizeof(global_pos)); + orb_copy(ORB_ID(vehicle_global_position), global_position_sub, &global_pos); + + /* get a local copy of the vehicle status data */ + struct vehicle_status_s vehicle_status; + memset(&vehicle_status, 0, sizeof(vehicle_status)); + orb_copy(ORB_ID(vehicle_status), vehicle_status_sub, &vehicle_status); + + /* send formatted frame */ + float course = 0, lat = 0, lon = 0, speed = 0, alt = 0; + char lat_ns = 0, lon_ew = 0; + int sec = 0; + if (global_pos.valid) { + time_t time_gps = global_pos.time_gps_usec / 1000000; + struct tm *tm_gps = gmtime(&time_gps); + + course = (global_pos.yaw + M_PI_F) / M_PI_F * 180.0f; + lat = frsky_format_gps(abs(global_pos.lat) / 10000000.0f); + lat_ns = (global_pos.lat < 0) ? 'S' : 'N'; + lon = frsky_format_gps(abs(global_pos.lon) / 10000000.0f); + lon_ew = (global_pos.lon < 0) ? 'W' : 'E'; + speed = sqrtf(global_pos.vx * global_pos.vx + global_pos.vy * global_pos.vy) + * 25.0f / 46.0f; + alt = global_pos.alt; + sec = tm_gps->tm_sec; + } + + frsky_send_data(uart, FRSKY_ID_GPS_COURS_BP, course); + frsky_send_data(uart, FRSKY_ID_GPS_COURS_AP, frac(course) * 1000.0f); + + frsky_send_data(uart, FRSKY_ID_GPS_LAT_BP, lat); + frsky_send_data(uart, FRSKY_ID_GPS_LAT_AP, frac(lat) * 10000.0f); + frsky_send_data(uart, FRSKY_ID_GPS_LAT_NS, lat_ns); + + frsky_send_data(uart, FRSKY_ID_GPS_LONG_BP, lon); + frsky_send_data(uart, FRSKY_ID_GPS_LONG_AP, frac(lon) * 10000.0f); + frsky_send_data(uart, FRSKY_ID_GPS_LONG_EW, lon_ew); + + frsky_send_data(uart, FRSKY_ID_GPS_SPEED_BP, speed); + frsky_send_data(uart, FRSKY_ID_GPS_SPEED_AP, frac(speed) * 100.0f); + + frsky_send_data(uart, FRSKY_ID_GPS_ALT_BP, alt); + frsky_send_data(uart, FRSKY_ID_GPS_ALT_AP, frac(alt) * 100.0f); + + frsky_send_data(uart, FRSKY_ID_FUEL, + roundf(vehicle_status.battery_remaining * 100.0f)); + + frsky_send_data(uart, FRSKY_ID_GPS_SEC, sec); + + frsky_send_startstop(uart); +} + +/** + * Sends frame 3 (every 5000ms): + * GPS date & time + */ +void frsky_send_frame3(int uart) +{ + /* get a local copy of the battery data */ + struct vehicle_global_position_s global_pos; + memset(&global_pos, 0, sizeof(global_pos)); + orb_copy(ORB_ID(vehicle_global_position), global_position_sub, &global_pos); + + /* send formatted frame */ + time_t time_gps = global_pos.time_gps_usec / 1000000; + struct tm *tm_gps = gmtime(&time_gps); + uint16_t hour_min = (tm_gps->tm_min << 8) | (tm_gps->tm_hour & 0xff); + frsky_send_data(uart, FRSKY_ID_GPS_DAY_MONTH, tm_gps->tm_mday); + frsky_send_data(uart, FRSKY_ID_GPS_YEAR, tm_gps->tm_year); + frsky_send_data(uart, FRSKY_ID_GPS_HOUR_MIN, hour_min); + frsky_send_data(uart, FRSKY_ID_GPS_SEC, tm_gps->tm_sec); + + frsky_send_startstop(uart); +} diff --git a/src/drivers/frsky_telemetry/frsky_data.h b/src/drivers/frsky_telemetry/frsky_data.h new file mode 100644 index 000000000..a7d9eee53 --- /dev/null +++ b/src/drivers/frsky_telemetry/frsky_data.h @@ -0,0 +1,51 @@ +/**************************************************************************** + * + * Copyright (c) 2013-2014 PX4 Development Team. All rights reserved. + * Author: Stefan Rado <px4@sradonia.net> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file frsky_data.h + * @author Stefan Rado <px4@sradonia.net> + * + * FrSky telemetry implementation. + * + */ +#ifndef _FRSKY_DATA_H +#define _FRSKY_DATA_H + +// Public functions +void frsky_init(void); +void frsky_send_frame1(int uart); +void frsky_send_frame2(int uart); +void frsky_send_frame3(int uart); + +#endif /* _FRSKY_TELEMETRY_H */ diff --git a/src/drivers/frsky_telemetry/frsky_telemetry.c b/src/drivers/frsky_telemetry/frsky_telemetry.c new file mode 100644 index 000000000..7b08ca69e --- /dev/null +++ b/src/drivers/frsky_telemetry/frsky_telemetry.c @@ -0,0 +1,266 @@ +/**************************************************************************** + * + * Copyright (c) 2013-2014 PX4 Development Team. All rights reserved. + * Author: Stefan Rado <px4@sradonia.net> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file frsky_telemetry.c + * @author Stefan Rado <px4@sradonia.net> + * + * FrSky telemetry implementation. + * + * This daemon emulates an FrSky sensor hub by periodically sending data + * packets to an attached FrSky receiver. + * + */ + +#include <stdlib.h> +#include <stdio.h> +#include <stdbool.h> +#include <string.h> +#include <sys/types.h> +#include <fcntl.h> +#include <unistd.h> +#include <systemlib/err.h> +#include <systemlib/systemlib.h> +#include <termios.h> + +#include "frsky_data.h" + + +/* thread state */ +static volatile bool thread_should_exit = false; +static volatile bool thread_running = false; +static int frsky_task; + +/* functions */ +static int frsky_open_uart(const char *uart_name, struct termios *uart_config_original); +static void usage(void); +static int frsky_telemetry_thread_main(int argc, char *argv[]); +__EXPORT int frsky_telemetry_main(int argc, char *argv[]); + + +/** + * Opens the UART device and sets all required serial parameters. + */ +static int frsky_open_uart(const char *uart_name, struct termios *uart_config_original) +{ + /* Open UART */ + const int uart = open(uart_name, O_WRONLY | O_NOCTTY); + + if (uart < 0) { + err(1, "Error opening port: %s", uart_name); + } + + /* Back up the original UART configuration to restore it after exit */ + int termios_state; + if ((termios_state = tcgetattr(uart, uart_config_original)) < 0) { + warnx("ERROR get termios config %s: %d\n", uart_name, termios_state); + close(uart); + return -1; + } + + /* Fill the struct for the new configuration */ + struct termios uart_config; + tcgetattr(uart, &uart_config); + + /* Disable output post-processing */ + uart_config.c_oflag &= ~OPOST; + + /* Set baud rate */ + static const speed_t speed = B9600; + + if (cfsetispeed(&uart_config, speed) < 0 || cfsetospeed(&uart_config, speed) < 0) { + warnx("ERROR setting baudrate / termios config for %s: %d (cfsetispeed, cfsetospeed)\n", uart_name, termios_state); + close(uart); + return -1; + } + + if ((termios_state = tcsetattr(uart, TCSANOW, &uart_config)) < 0) { + warnx("ERROR setting baudrate / termios config for %s (tcsetattr)\n", uart_name); + close(uart); + return -1; + } + + return uart; +} + +/** + * Print command usage information + */ +static void usage() +{ + fprintf(stderr, + "usage: frsky_telemetry start [-d <devicename>]\n" + " frsky_telemetry stop\n" + " frsky_telemetry status\n"); + exit(1); +} + +/** + * The daemon thread. + */ +static int frsky_telemetry_thread_main(int argc, char *argv[]) +{ + /* Default values for arguments */ + char *device_name = "/dev/ttyS1"; /* USART2 */ + + /* Work around some stupidity in task_create's argv handling */ + argc -= 2; + argv += 2; + + int ch; + while ((ch = getopt(argc, argv, "d:")) != EOF) { + switch (ch) { + case 'd': + device_name = optarg; + break; + + default: + usage(); + break; + } + } + + /* Print welcome text */ + warnx("FrSky telemetry interface starting..."); + + /* Open UART */ + struct termios uart_config_original; + const int uart = frsky_open_uart(device_name, &uart_config_original); + + if (uart < 0) + err(1, "could not open %s", device_name); + + /* Subscribe to topics */ + frsky_init(); + + thread_running = true; + + /* Main thread loop */ + unsigned int iteration = 0; + while (!thread_should_exit) { + + /* Sleep 200 ms */ + usleep(200000); + + /* Send frame 1 (every 200ms): acceleration values, altitude (vario), temperatures, current & voltages, RPM */ + frsky_send_frame1(uart); + + /* Send frame 2 (every 1000ms): course, latitude, longitude, speed, altitude (GPS), fuel level */ + if (iteration % 5 == 0) + { + frsky_send_frame2(uart); + } + + /* Send frame 3 (every 5000ms): date, time */ + if (iteration % 25 == 0) + { + frsky_send_frame3(uart); + + iteration = 0; + } + + iteration++; + } + + /* Reset the UART flags to original state */ + tcsetattr(uart, TCSANOW, &uart_config_original); + close(uart); + + thread_running = false; + return 0; +} + +/** + * The main command function. + * Processes command line arguments and starts the daemon. + */ +int frsky_telemetry_main(int argc, char *argv[]) +{ + if (argc < 2) { + warnx("missing command"); + usage(); + } + + if (!strcmp(argv[1], "start")) { + + /* this is not an error */ + if (thread_running) + errx(0, "frsky_telemetry already running"); + + thread_should_exit = false; + frsky_task = task_spawn_cmd("frsky_telemetry", + SCHED_DEFAULT, + SCHED_PRIORITY_DEFAULT, + 2048, + frsky_telemetry_thread_main, + (const char **)argv); + + while (!thread_running) { + usleep(200); + } + + exit(0); + } + + if (!strcmp(argv[1], "stop")) { + + /* this is not an error */ + if (!thread_running) + errx(0, "frsky_telemetry already stopped"); + + thread_should_exit = true; + + while (thread_running) { + usleep(200000); + warnx("."); + } + + warnx("terminated."); + exit(0); + } + + if (!strcmp(argv[1], "status")) { + if (thread_running) { + errx(0, "running"); + + } else { + errx(1, "not running"); + } + } + + warnx("unrecognized command"); + usage(); + /* not getting here */ + return 0; +} diff --git a/src/drivers/frsky_telemetry/module.mk b/src/drivers/frsky_telemetry/module.mk new file mode 100644 index 000000000..1632c74f7 --- /dev/null +++ b/src/drivers/frsky_telemetry/module.mk @@ -0,0 +1,41 @@ +############################################################################ +# +# Copyright (c) 2013-2014 PX4 Development Team. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name PX4 nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +# +# FrSky telemetry application. +# + +MODULE_COMMAND = frsky_telemetry + +SRCS = frsky_data.c \ + frsky_telemetry.c diff --git a/src/drivers/hott/hott_sensors/hott_sensors.cpp b/src/drivers/hott/hott_sensors/hott_sensors.cpp index e322c6349..a3d3a3933 100644 --- a/src/drivers/hott/hott_sensors/hott_sensors.cpp +++ b/src/drivers/hott/hott_sensors/hott_sensors.cpp @@ -211,7 +211,7 @@ hott_sensors_main(int argc, char *argv[]) thread_should_exit = false; deamon_task = task_spawn_cmd(daemon_name, SCHED_DEFAULT, - SCHED_PRIORITY_MAX - 40, + SCHED_PRIORITY_DEFAULT, 1024, hott_sensors_thread_main, (argv) ? (const char **)&argv[2] : (const char **)NULL); diff --git a/src/drivers/hott/hott_telemetry/hott_telemetry.cpp b/src/drivers/hott/hott_telemetry/hott_telemetry.cpp index 042d9f816..d293f9954 100644 --- a/src/drivers/hott/hott_telemetry/hott_telemetry.cpp +++ b/src/drivers/hott/hott_telemetry/hott_telemetry.cpp @@ -237,7 +237,7 @@ hott_telemetry_main(int argc, char *argv[]) thread_should_exit = false; deamon_task = task_spawn_cmd(daemon_name, SCHED_DEFAULT, - SCHED_PRIORITY_MAX - 40, + SCHED_PRIORITY_DEFAULT, 2048, hott_telemetry_thread_main, (argv) ? (const char **)&argv[2] : (const char **)NULL); diff --git a/src/drivers/meas_airspeed/meas_airspeed.cpp b/src/drivers/meas_airspeed/meas_airspeed.cpp index 3cd6d6720..a95c4576b 100644 --- a/src/drivers/meas_airspeed/meas_airspeed.cpp +++ b/src/drivers/meas_airspeed/meas_airspeed.cpp @@ -198,7 +198,9 @@ MEASAirspeed::collect() // uint16_t diff_press_pa = abs(dp_raw - (16384 / 2.0f)); const float P_min = -1.0f; const float P_max = 1.0f; - float diff_press_pa = math::max(0.0f, fabsf( ( ((float)dp_raw - 0.1f*16383.0f) * (P_max-P_min)/(0.8f*16383.0f) + P_min) * 6894.8f) - _diff_pres_offset); + float diff_press_pa = fabsf( ( ((float)dp_raw - 0.1f*16383.0f) * (P_max-P_min)/(0.8f*16383.0f) + P_min) * 6894.8f) - _diff_pres_offset; + if (diff_press_pa < 0.0f) + diff_press_pa = 0.0f; struct differential_pressure_s report; diff --git a/src/drivers/ms5611/ms5611.cpp b/src/drivers/ms5611/ms5611.cpp index 87788824a..6326cf7fc 100644 --- a/src/drivers/ms5611/ms5611.cpp +++ b/src/drivers/ms5611/ms5611.cpp @@ -124,6 +124,8 @@ protected: int32_t _TEMP; int64_t _OFF; int64_t _SENS; + float _P; + float _T; /* altitude conversion calibration */ unsigned _msl_pressure; /* in kPa */ @@ -623,6 +625,8 @@ MS5611::collect() /* pressure calculation, result in Pa */ int32_t P = (((raw * _SENS) >> 21) - _OFF) >> 15; + _P = P * 0.01f; + _T = _TEMP * 0.01f; /* generate a new report */ report.temperature = _TEMP / 100.0f; @@ -695,6 +699,8 @@ MS5611::print_info() printf("TEMP: %d\n", _TEMP); printf("SENS: %lld\n", _SENS); printf("OFF: %lld\n", _OFF); + printf("P: %.3f\n", _P); + printf("T: %.3f\n", _T); printf("MSL pressure: %10.4f\n", (double)(_msl_pressure / 100.f)); printf("factory_setup %u\n", _prom.factory_setup); diff --git a/src/drivers/px4fmu/fmu.cpp b/src/drivers/px4fmu/fmu.cpp index b878d29bc..b28d318d7 100644 --- a/src/drivers/px4fmu/fmu.cpp +++ b/src/drivers/px4fmu/fmu.cpp @@ -65,6 +65,7 @@ #include <systemlib/err.h> #include <systemlib/mixer/mixer.h> #include <systemlib/pwm_limit/pwm_limit.h> +#include <systemlib/board_serial.h> #include <drivers/drv_mixer.h> #include <drivers/drv_rc_input.h> @@ -224,10 +225,10 @@ PX4FMU::PX4FMU() : _armed(false), _pwm_on(false), _mixers(nullptr), - _failsafe_pwm( {0}), - _disarmed_pwm( {0}), - _num_failsafe_set(0), - _num_disarmed_set(0) + _failsafe_pwm({0}), + _disarmed_pwm({0}), + _num_failsafe_set(0), + _num_disarmed_set(0) { for (unsigned i = 0; i < _max_actuators; i++) { _min_pwm[i] = PWM_DEFAULT_MIN; @@ -575,7 +576,7 @@ PX4FMU::task_main() if (i >= outputs.noutputs || !isfinite(outputs.output[i]) || outputs.output[i] < -1.0f || - outputs.output[i] > 1.0f) { + outputs.output[i] > 1.0f) { /* * Value is NaN, INF or out of band - set to the minimum value. * This will be clearly visible on the servo status and will limit the risk of accidentally @@ -933,7 +934,7 @@ PX4FMU::pwm_ioctl(file *filp, int cmd, unsigned long arg) break; } - /* FALLTHROUGH */ + /* FALLTHROUGH */ case PWM_SERVO_SET(3): case PWM_SERVO_SET(2): if (_mode < MODE_4PWM) { @@ -941,7 +942,7 @@ PX4FMU::pwm_ioctl(file *filp, int cmd, unsigned long arg) break; } - /* FALLTHROUGH */ + /* FALLTHROUGH */ case PWM_SERVO_SET(1): case PWM_SERVO_SET(0): if (arg <= 2100) { @@ -960,7 +961,7 @@ PX4FMU::pwm_ioctl(file *filp, int cmd, unsigned long arg) break; } - /* FALLTHROUGH */ + /* FALLTHROUGH */ case PWM_SERVO_GET(3): case PWM_SERVO_GET(2): if (_mode < MODE_4PWM) { @@ -968,7 +969,7 @@ PX4FMU::pwm_ioctl(file *filp, int cmd, unsigned long arg) break; } - /* FALLTHROUGH */ + /* FALLTHROUGH */ case PWM_SERVO_GET(1): case PWM_SERVO_GET(0): *(servo_position_t *)arg = up_pwm_servo_get(cmd - PWM_SERVO_GET(0)); @@ -1591,6 +1592,15 @@ fmu_main(int argc, char *argv[]) errx(0, "FMU driver stopped"); } + if (!strcmp(verb, "id")) { + char id[12]; + (void)get_board_serial(id); + + errx(0, "Board serial:\n %02X%02X%02X%02X %02X%02X%02X%02X %02X%02X%02X%02X", + (unsigned)id[0], (unsigned)id[1], (unsigned)id[2], (unsigned)id[3], (unsigned)id[4], (unsigned)id[5], + (unsigned)id[6], (unsigned)id[7], (unsigned)id[8], (unsigned)id[9], (unsigned)id[10], (unsigned)id[11]); + } + if (fmu_start() != OK) errx(1, "failed to start the FMU driver"); @@ -1647,6 +1657,7 @@ fmu_main(int argc, char *argv[]) sensor_reset(0); warnx("resettet default time"); } + exit(0); } diff --git a/src/drivers/px4io/px4io.cpp b/src/drivers/px4io/px4io.cpp index cbdd5acc4..0ca35d2f2 100644 --- a/src/drivers/px4io/px4io.cpp +++ b/src/drivers/px4io/px4io.cpp @@ -1,6 +1,6 @@ /**************************************************************************** * - * Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. + * Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -35,7 +35,7 @@ * @file px4io.cpp * Driver for the PX4IO board. * - * PX4IO is connected via I2C. + * PX4IO is connected via I2C or DMA enabled high-speed UART. */ #include <nuttx/config.h> @@ -1690,6 +1690,9 @@ PX4IO::mixer_send(const char *buf, unsigned buflen, unsigned retries) int ret = io_reg_set(PX4IO_PAGE_MIXERLOAD, 0, (uint16_t *)frame, (sizeof(px4io_mixdata) + 2) / 2); + if (ret) + return ret; + retries--; log("mixer sent"); @@ -2420,6 +2423,69 @@ detect(int argc, char *argv[]) } void +checkcrc(int argc, char *argv[]) +{ + bool keep_running = false; + + if (g_dev == nullptr) { + /* allocate the interface */ + device::Device *interface = get_interface(); + + /* create the driver - it will set g_dev */ + (void)new PX4IO(interface); + + if (g_dev == nullptr) + errx(1, "driver alloc failed"); + } else { + /* its already running, don't kill the driver */ + keep_running = true; + } + + /* + check IO CRC against CRC of a file + */ + if (argc < 2) { + printf("usage: px4io checkcrc filename\n"); + exit(1); + } + int fd = open(argv[1], O_RDONLY); + if (fd == -1) { + printf("open of %s failed - %d\n", argv[1], errno); + exit(1); + } + const uint32_t app_size_max = 0xf000; + uint32_t fw_crc = 0; + uint32_t nbytes = 0; + while (true) { + uint8_t buf[16]; + int n = read(fd, buf, sizeof(buf)); + if (n <= 0) break; + fw_crc = crc32part(buf, n, fw_crc); + nbytes += n; + } + close(fd); + while (nbytes < app_size_max) { + uint8_t b = 0xff; + fw_crc = crc32part(&b, 1, fw_crc); + nbytes++; + } + + int ret = g_dev->ioctl(nullptr, PX4IO_CHECK_CRC, fw_crc); + + if (!keep_running) { + delete g_dev; + g_dev = nullptr; + } + + if (ret != OK) { + printf("check CRC failed - %d\n", ret); + exit(1); + } + printf("CRCs match\n"); + exit(0); +} + +void bind(int argc, char *argv[]) { int pulses; @@ -2613,6 +2679,9 @@ px4io_main(int argc, char *argv[]) if (!strcmp(argv[1], "detect")) detect(argc - 1, argv + 1); + if (!strcmp(argv[1], "checkcrc")) + checkcrc(argc - 1, argv + 1); + if (!strcmp(argv[1], "update")) { if (g_dev != nullptr) { @@ -2798,49 +2867,6 @@ px4io_main(int argc, char *argv[]) exit(0); } - if (!strcmp(argv[1], "checkcrc")) { - /* - check IO CRC against CRC of a file - */ - if (argc <= 2) { - printf("usage: px4io checkcrc filename\n"); - exit(1); - } - if (g_dev == nullptr) { - printf("px4io is not started\n"); - exit(1); - } - int fd = open(argv[2], O_RDONLY); - if (fd == -1) { - printf("open of %s failed - %d\n", argv[2], errno); - exit(1); - } - const uint32_t app_size_max = 0xf000; - uint32_t fw_crc = 0; - uint32_t nbytes = 0; - while (true) { - uint8_t buf[16]; - int n = read(fd, buf, sizeof(buf)); - if (n <= 0) break; - fw_crc = crc32part(buf, n, fw_crc); - nbytes += n; - } - close(fd); - while (nbytes < app_size_max) { - uint8_t b = 0xff; - fw_crc = crc32part(&b, 1, fw_crc); - nbytes++; - } - - int ret = g_dev->ioctl(nullptr, PX4IO_CHECK_CRC, fw_crc); - if (ret != OK) { - printf("check CRC failed - %d\n", ret); - exit(1); - } - printf("CRCs match\n"); - exit(0); - } - if (!strcmp(argv[1], "rx_dsm") || !strcmp(argv[1], "rx_dsm_10bit") || !strcmp(argv[1], "rx_dsm_11bit") || diff --git a/src/modules/px4iofirmware/dsm.c b/src/modules/px4iofirmware/dsm.c index 4d306d6d0..60eda2319 100644 --- a/src/modules/px4iofirmware/dsm.c +++ b/src/modules/px4iofirmware/dsm.c @@ -203,6 +203,12 @@ dsm_guess_format(bool reset) int dsm_init(const char *device) { + +#ifdef CONFIG_ARCH_BOARD_PX4IO_V2 + // enable power on DSM connector + POWER_SPEKTRUM(true); +#endif + if (dsm_fd < 0) dsm_fd = open(device, O_RDONLY | O_NONBLOCK); diff --git a/src/modules/px4iofirmware/px4io.c b/src/modules/px4iofirmware/px4io.c index 745bd5705..0b8c4a6a8 100644 --- a/src/modules/px4iofirmware/px4io.c +++ b/src/modules/px4iofirmware/px4io.c @@ -125,6 +125,25 @@ heartbeat_blink(void) LED_BLUE(heartbeat = !heartbeat); } +static uint64_t reboot_time; + +/** + schedule a reboot in time_delta_usec microseconds + */ +void schedule_reboot(uint32_t time_delta_usec) +{ + reboot_time = hrt_absolute_time() + time_delta_usec; +} + +/** + check for a scheduled reboot + */ +static void check_reboot(void) +{ + if (reboot_time != 0 && hrt_absolute_time() > reboot_time) { + up_systemreset(); + } +} static void calculate_fw_crc(void) @@ -249,6 +268,8 @@ user_start(int argc, char *argv[]) heartbeat_blink(); } + check_reboot(); + #if 0 /* check for debug activity */ show_debug_messages(); diff --git a/src/modules/px4iofirmware/px4io.h b/src/modules/px4iofirmware/px4io.h index dea04a663..a0daa97ea 100644 --- a/src/modules/px4iofirmware/px4io.h +++ b/src/modules/px4iofirmware/px4io.h @@ -220,3 +220,7 @@ extern volatile uint8_t debug_level; /** send a debug message to the console */ extern void isr_debug(uint8_t level, const char *fmt, ...); + +/** schedule a reboot */ +extern void schedule_reboot(uint32_t time_delta_usec); + diff --git a/src/modules/px4iofirmware/registers.c b/src/modules/px4iofirmware/registers.c index bfc0337f6..0e704a360 100644 --- a/src/modules/px4iofirmware/registers.c +++ b/src/modules/px4iofirmware/registers.c @@ -518,16 +518,11 @@ registers_set_one(uint8_t page, uint8_t offset, uint16_t value) // check the magic value if (value != PX4IO_REBOOT_BL_MAGIC) break; - - // note that we don't set BL_WAIT_MAGIC in - // BKP_DR1 as that is not necessary given the - // timing of the forceupdate command. The - // bootloader on px4io waits for enough time - // anyway, and this method works with older - // bootloader versions (tested with both - // revision 3 and revision 4). - - up_systemreset(); + + // we schedule a reboot rather than rebooting + // immediately to allow the IO board to ACK + // the reboot command + schedule_reboot(100000); break; case PX4IO_P_SETUP_DSM: diff --git a/src/modules/systemlib/board_serial.c b/src/modules/systemlib/board_serial.c new file mode 100644 index 000000000..ad8c2bf83 --- /dev/null +++ b/src/modules/systemlib/board_serial.c @@ -0,0 +1,60 @@ +/**************************************************************************** + * + * Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file board_serial.h + * Read off the board serial + * + * @author Lorenz Meier <lm@inf.ethz.ch> + * @author David "Buzz" Bussenschutt <davidbuzz@gmail.com> + * + */ + +#include "otp.h" +#include "board_config.h" +#include "board_serial.h" + +int get_board_serial(char *serialid) +{ + const volatile unsigned *udid_ptr = (const unsigned *)UDID_START; + union udid id; + val_read((unsigned *)&id, udid_ptr, sizeof(id)); + + + /* Copy the serial from the chips non-write memory and swap endianess */ + serialid[0] = id.data[3]; serialid[1] = id.data[2]; serialid[2] = id.data[1]; serialid[3] = id.data[0]; + serialid[4] = id.data[7]; serialid[5] = id.data[6]; serialid[6] = id.data[5]; serialid[7] = id.data[4]; + serialid[8] = id.data[11]; serialid[9] = id.data[10]; serialid[10] = id.data[9]; serialid[11] = id.data[8]; + + return 0; +}
\ No newline at end of file diff --git a/src/modules/systemlib/board_serial.h b/src/modules/systemlib/board_serial.h new file mode 100644 index 000000000..b14bb4376 --- /dev/null +++ b/src/modules/systemlib/board_serial.h @@ -0,0 +1,49 @@ +/**************************************************************************** + * + * Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file board_serial.h + * Read off the board serial + * + * @author Lorenz Meier <lm@inf.ethz.ch> + * @author David "Buzz" Bussenschutt <davidbuzz@gmail.com> + * + */ + +#pragma once + +__BEGIN_DECLS + +__EXPORT int get_board_serial(char *serialid); + +__END_DECLS diff --git a/src/modules/systemlib/module.mk b/src/modules/systemlib/module.mk index 843cda722..8c6c300d6 100644 --- a/src/modules/systemlib/module.mk +++ b/src/modules/systemlib/module.mk @@ -49,4 +49,7 @@ SRCS = err.c \ airspeed.c \ system_params.c \ mavlink_log.c \ - rc_check.c + rc_check.c \ + otp.c \ + board_serial.c + diff --git a/src/modules/systemlib/otp.c b/src/modules/systemlib/otp.c new file mode 100644 index 000000000..695574fdc --- /dev/null +++ b/src/modules/systemlib/otp.c @@ -0,0 +1,224 @@ +/**************************************************************************** + * + * Copyright (C) 2012-2013 PX4 Development Team. All rights reserved. + * Authors: + * Lorenz Meier <lm@inf.ethz.ch> + * David "Buzz" Bussenschutt <davidbuzz@gmail.com> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file otp.c + * otp estimation + * + * @author Lorenz Meier <lm@inf.ethz.ch> + * @author David "Buzz" Bussenschutt <davidbuzz@gmail.com> + * + */ + +#include <nuttx/config.h> +#include <board_config.h> +#include <stdio.h> +#include <math.h> +#include <unistd.h> +#include <string.h> // memset +#include "conversions.h" +#include "otp.h" +#include "err.h" // warnx +#include <assert.h> + + +int val_read(void *dest, volatile const void *src, int bytes) +{ + + int i; + + for (i = 0; i < bytes / 4; i++) { + *(((volatile unsigned *)dest) + i) = *(((volatile unsigned *)src) + i); + } + + return i * 4; +} + + +int write_otp(uint8_t id_type, uint32_t vid, uint32_t pid, char *signature) +{ + + warnx("write_otp: PX4 / %02X / %02X / %02X / ... etc \n", id_type, vid, pid); + + int errors = 0; + + // descriptor + if (F_write_byte(ADDR_OTP_START, 'P')) + errors++; + // write the 'P' from PX4. to first byte in OTP + if (F_write_byte(ADDR_OTP_START + 1, 'X')) + errors++; // write the 'P' from PX4. to first byte in OTP + if (F_write_byte(ADDR_OTP_START + 2, '4')) + errors++; + if (F_write_byte(ADDR_OTP_START + 3, '\0')) + errors++; + //id_type + if (F_write_byte(ADDR_OTP_START + 4, id_type)) + errors++; + // vid and pid are 4 bytes each + if (F_write_word(ADDR_OTP_START + 5, vid)) + errors++; + if (F_write_word(ADDR_OTP_START + 9, pid)) + errors++; + + // leave some 19 bytes of space, and go to the next block... + // then the auth sig starts + for (int i = 0 ; i < 128 ; i++) { + if (F_write_byte(ADDR_OTP_START + 32 + i, signature[i])) + errors++; + } + + return errors; +} + +int lock_otp(void) +{ + //determine the required locking size - can only write full lock bytes */ +// int size = sizeof(struct otp) / 32; +// +// struct otp_lock otp_lock_mem; +// +// memset(&otp_lock_mem, OTP_LOCK_UNLOCKED, sizeof(otp_lock_mem)); +// for (int i = 0; i < sizeof(otp_lock_mem) / sizeof(otp_lock_mem.lock_bytes[0]); i++) +// otp_lock_mem.lock_bytes[i] = OTP_LOCK_LOCKED; + //XXX add the actual call here to write the OTP_LOCK bytes only at final stage + // val_copy(lock_ptr, &otp_lock_mem, sizeof(otp_lock_mem)); + + int locksize = 5; + + int errors = 0; + + // or just realise it's exctly 5x 32byte blocks we need to lock. 1 block for ID,type,vid,pid, and 4 blocks for certificate, which is 128 bytes. + for (int i = 0 ; i < locksize ; i++) { + if (F_write_byte(ADDR_OTP_LOCK_START + i, OTP_LOCK_LOCKED)) + errors++; + } + + return errors; +} + + + +// COMPLETE, BUSY, or other flash error? +int F_GetStatus(void) +{ + int fs = F_COMPLETE; + + if ((FLASH->status & F_BSY) == F_BSY) { fs = F_BUSY; } else { + + if ((FLASH->status & F_WRPERR) != (uint32_t)0x00) { fs = F_ERROR_WRP; } else { + + if ((FLASH->status & (uint32_t)0xEF) != (uint32_t)0x00) { fs = F_ERROR_PROGRAM; } else { + + if ((FLASH->status & F_OPERR) != (uint32_t)0x00) { fs = F_ERROR_OPERATION; } else { + fs = F_COMPLETE; + } + } + } + } + + return fs; +} + + +// enable FLASH Registers +void F_unlock(void) +{ + if ((FLASH->control & F_CR_LOCK) != 0) { + FLASH->key = F_KEY1; + FLASH->key = F_KEY2; + } +} + +// lock the FLASH Registers +void F_lock(void) +{ + FLASH->control |= F_CR_LOCK; +} + +// flash write word. +int F_write_word(uint32_t Address, uint32_t Data) +{ + unsigned char octet[4] = {0, 0, 0, 0}; + + int ret = 0; + + for (int i = 0; i < 4; i++) { + octet[i] = (Data >> (i * 8)) & 0xFF; + ret = F_write_byte(Address + i, octet[i]); + } + + return ret; +} + +// flash write byte +int F_write_byte(uint32_t Address, uint8_t Data) +{ + volatile int status = F_COMPLETE; + + //warnx("F_write_byte: %08X %02d", Address , Data ) ; + + //Check the parameters + assert(IS_F_ADDRESS(Address)); + + //Wait for FLASH operation to complete by polling on BUSY flag. + status = F_GetStatus(); + + while (status == F_BUSY) { status = F_GetStatus();} + + if (status == F_COMPLETE) { + //if the previous operation is completed, proceed to program the new data + FLASH->control &= CR_PSIZE_MASK; + FLASH->control |= F_PSIZE_BYTE; + FLASH->control |= F_CR_PG; + + *(volatile uint8_t *)Address = Data; + + //Wait for FLASH operation to complete by polling on BUSY flag. + status = F_GetStatus(); + + while (status == F_BUSY) { status = F_GetStatus();} + + //if the program operation is completed, disable the PG Bit + FLASH->control &= (~F_CR_PG); + } + + //Return the Program Status + return !(status == F_COMPLETE); +} + + + diff --git a/src/modules/systemlib/otp.h b/src/modules/systemlib/otp.h new file mode 100644 index 000000000..f10e129d8 --- /dev/null +++ b/src/modules/systemlib/otp.h @@ -0,0 +1,151 @@ +/**************************************************************************** + * + * Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file otp.h + * One TIme Programmable ( OTP ) Flash routine/s. + * + * @author Lorenz Meier <lm@inf.ethz.ch> + * @author David "Buzz" Bussenschutt <davidbuzz@gmail.com> + * + */ + +#ifndef OTP_H_ +#define OTP_H_ + +__BEGIN_DECLS + +#define ADDR_OTP_START 0x1FFF7800 +#define ADDR_OTP_LOCK_START 0x1FFF7A00 + +#define OTP_LOCK_LOCKED 0x00 +#define OTP_LOCK_UNLOCKED 0xFF + + + +#include <unistd.h> +#include <stdio.h> + +// possible flash statuses +#define F_BUSY 1 +#define F_ERROR_WRP 2 +#define F_ERROR_PROGRAM 3 +#define F_ERROR_OPERATION 4 +#define F_COMPLETE 5 + +typedef struct { + volatile uint32_t accesscontrol; // 0x00 + volatile uint32_t key; // 0x04 + volatile uint32_t optionkey; // 0x08 + volatile uint32_t status; // 0x0C + volatile uint32_t control; // 0x10 + volatile uint32_t optioncontrol; //0x14 +} flash_registers; + +#define PERIPH_BASE ((uint32_t)0x40000000) //Peripheral base address +#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000) +#define F_R_BASE (AHB1PERIPH_BASE + 0x3C00) +#define FLASH ((flash_registers *) F_R_BASE) + +#define F_BSY ((uint32_t)0x00010000) //FLASH Busy flag bit +#define F_OPERR ((uint32_t)0x00000002) //FLASH operation Error flag bit +#define F_WRPERR ((uint32_t)0x00000010) //FLASH Write protected error flag bit +#define CR_PSIZE_MASK ((uint32_t)0xFFFFFCFF) +#define F_PSIZE_WORD ((uint32_t)0x00000200) +#define F_PSIZE_BYTE ((uint32_t)0x00000000) +#define F_CR_PG ((uint32_t)0x00000001) // a bit in the F_CR register +#define F_CR_LOCK ((uint32_t)0x80000000) // also another bit. + +#define F_KEY1 ((uint32_t)0x45670123) +#define F_KEY2 ((uint32_t)0xCDEF89AB) +#define IS_F_ADDRESS(ADDRESS) ((((ADDRESS) >= 0x08000000) && ((ADDRESS) < 0x080FFFFF)) || (((ADDRESS) >= 0x1FFF7800) && ((ADDRESS) < 0x1FFF7A0F))) + + + +#pragma pack(push, 1) + +/* + * The OTP area is divided into 16 OTP data blocks of 32 bytes and one lock OTP block of 16 bytes. + * The OTP data and lock blocks cannot be erased. The lock block contains 16 bytes LOCKBi (0 ≤ i ≤ 15) + * to lock the corresponding OTP data block (blocks 0 to 15). Each OTP data block can be programmed + * until the value 0x00 is programmed in the corresponding OTP lock byte. The lock bytes must only + * contain 0x00 and 0xFF values, otherwise the OTP bytes might not be taken into account correctly. + */ + +struct otp { + // first 32 bytes = the '0' Block + char id[4]; ///4 bytes < 'P' 'X' '4' '\n' + uint8_t id_type; ///1 byte < 0 for USB VID, 1 for generic VID + uint32_t vid; ///4 bytes + uint32_t pid; ///4 bytes + char unused[19]; ///19 bytes + // Cert-of-Auth is next 4 blocks ie 1-4 ( where zero is first block ) + char signature[128]; + // insert extras here + uint32_t lock_bytes[4]; +}; + +struct otp_lock { + uint8_t lock_bytes[16]; +}; +#pragma pack(pop) + +#define ADDR_F_SIZE 0x1FFF7A22 + +#pragma pack(push, 1) +union udid { + uint32_t serial[3]; + char data[12]; +}; +#pragma pack(pop) + + +/** + * s + */ +//__EXPORT float calc_indicated_airspeed(float differential_pressure); + +__EXPORT void F_unlock(void); +__EXPORT void F_lock(void); +__EXPORT int val_read(void *dest, volatile const void *src, int bytes); +__EXPORT int val_write(volatile void *dest, const void *src, int bytes); +__EXPORT int write_otp(uint8_t id_type, uint32_t vid, uint32_t pid, char *signature); +__EXPORT int lock_otp(void); + + +__EXPORT int F_write_byte(uint32_t Address, uint8_t Data); +__EXPORT int F_write_word(uint32_t Address, uint32_t Data); + +__END_DECLS + +#endif diff --git a/src/systemcmds/nshterm/nshterm.c b/src/systemcmds/nshterm/nshterm.c index 458bb2259..7d9484d3e 100644 --- a/src/systemcmds/nshterm/nshterm.c +++ b/src/systemcmds/nshterm/nshterm.c @@ -62,7 +62,9 @@ nshterm_main(int argc, char *argv[]) } uint8_t retries = 0; int fd = -1; - while (retries < 50) { + + /* try the first 30 seconds */ + while (retries < 300) { /* the retries are to cope with the behaviour of /dev/ttyACM0 */ /* which may not be ready immediately. */ fd = open(argv[1], O_RDWR); diff --git a/src/systemcmds/tests/module.mk b/src/systemcmds/tests/module.mk index 68a080c77..28e214a6c 100644 --- a/src/systemcmds/tests/module.mk +++ b/src/systemcmds/tests/module.mk @@ -28,4 +28,5 @@ SRCS = test_adc.c \ tests_main.c \ test_param.c \ test_ppm_loopback.c \ - test_rc.c + test_rc.c \ + test_mount.c diff --git a/src/systemcmds/tests/test_file.c b/src/systemcmds/tests/test_file.c index 798724cf1..7206b87d6 100644 --- a/src/systemcmds/tests/test_file.c +++ b/src/systemcmds/tests/test_file.c @@ -1,6 +1,6 @@ /**************************************************************************** * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -35,9 +35,12 @@ * @file test_file.c * * File write test. + * + * @author Lorenz Meier <lm@inf.ethz.ch> */ #include <sys/stat.h> +#include <poll.h> #include <dirent.h> #include <stdio.h> #include <stddef.h> @@ -51,6 +54,38 @@ #include "tests.h" +int check_user_abort(); + +int check_user_abort() { + /* check if user wants to abort */ + char c; + + struct pollfd fds; + int ret; + fds.fd = 0; /* stdin */ + fds.events = POLLIN; + ret = poll(&fds, 1, 0); + + if (ret > 0) { + + read(0, &c, 1); + + switch (c) { + case 0x03: // ctrl-c + case 0x1b: // esc + case 'c': + case 'q': + { + warnx("Test aborted."); + return OK; + /* not reached */ + } + } + } + + return 1; +} + int test_file(int argc, char *argv[]) { @@ -86,7 +121,6 @@ test_file(int argc, char *argv[]) uint8_t read_buf[chunk_sizes[c] + alignments] __attribute__((aligned(64))); hrt_abstime start, end; - //perf_counter_t wperf = perf_alloc(PC_ELAPSED, "SD writes (aligned)"); int fd = open("/fs/microsd/testfile", O_TRUNC | O_WRONLY | O_CREAT); @@ -94,28 +128,25 @@ test_file(int argc, char *argv[]) start = hrt_absolute_time(); for (unsigned i = 0; i < iterations; i++) { - //perf_begin(wperf); int wret = write(fd, write_buf + a, chunk_sizes[c]); if (wret != chunk_sizes[c]) { warn("WRITE ERROR!"); if ((0x3 & (uintptr_t)(write_buf + a))) - errx(1, "memory is unaligned, align shift: %d", a); + warnx("memory is unaligned, align shift: %d", a); + return 1; } fsync(fd); - //perf_end(wperf); + + if (!check_user_abort()) + return OK; } end = hrt_absolute_time(); - //warnx("%dKiB in %llu microseconds", iterations / 2, end - start); - - //perf_print_counter(wperf); - //perf_free(wperf); - close(fd); fd = open("/fs/microsd/testfile", O_RDONLY); @@ -124,7 +155,8 @@ test_file(int argc, char *argv[]) int rret = read(fd, read_buf, chunk_sizes[c]); if (rret != chunk_sizes[c]) { - errx(1, "READ ERROR!"); + warnx("READ ERROR!"); + return 1; } /* compare value */ @@ -139,9 +171,13 @@ test_file(int argc, char *argv[]) } if (!compare_ok) { - errx(1, "ABORTING FURTHER COMPARISON DUE TO ERROR"); + warnx("ABORTING FURTHER COMPARISON DUE TO ERROR"); + return 1; } + if (!check_user_abort()) + return OK; + } /* @@ -152,16 +188,20 @@ test_file(int argc, char *argv[]) int ret = unlink("/fs/microsd/testfile"); fd = open("/fs/microsd/testfile", O_TRUNC | O_WRONLY | O_CREAT); - warnx("testing aligned writes - please wait.."); + warnx("testing aligned writes - please wait.. (CTRL^C to abort)"); start = hrt_absolute_time(); for (unsigned i = 0; i < iterations; i++) { int wret = write(fd, write_buf, chunk_sizes[c]); if (wret != chunk_sizes[c]) { - err(1, "WRITE ERROR!"); + warnx("WRITE ERROR!"); + return 1; } + if (!check_user_abort()) + return OK; + } fsync(fd); @@ -178,7 +218,8 @@ test_file(int argc, char *argv[]) int rret = read(fd, read_buf, chunk_sizes[c]); if (rret != chunk_sizes[c]) { - err(1, "READ ERROR!"); + warnx("READ ERROR!"); + return 1; } /* compare value */ @@ -190,10 +231,14 @@ test_file(int argc, char *argv[]) align_read_ok = false; break; } + + if (!check_user_abort()) + return OK; } if (!align_read_ok) { - errx(1, "ABORTING FURTHER COMPARISON DUE TO ERROR"); + warnx("ABORTING FURTHER COMPARISON DUE TO ERROR"); + return 1; } } @@ -215,7 +260,8 @@ test_file(int argc, char *argv[]) int rret = read(fd, read_buf + a, chunk_sizes[c]); if (rret != chunk_sizes[c]) { - err(1, "READ ERROR!"); + warnx("READ ERROR!"); + return 1; } for (int j = 0; j < chunk_sizes[c]; j++) { @@ -228,10 +274,14 @@ test_file(int argc, char *argv[]) if (unalign_read_err_count > 10) break; } + + if (!check_user_abort()) + return OK; } if (!unalign_read_ok) { - errx(1, "ABORTING FURTHER COMPARISON DUE TO ERROR"); + warnx("ABORTING FURTHER COMPARISON DUE TO ERROR"); + return 1; } } @@ -239,9 +289,10 @@ test_file(int argc, char *argv[]) ret = unlink("/fs/microsd/testfile"); close(fd); - if (ret) - err(1, "UNLINKING FILE FAILED"); - + if (ret) { + warnx("UNLINKING FILE FAILED"); + return 1; + } } } @@ -261,75 +312,9 @@ test_file(int argc, char *argv[]) } else { /* failed opening dir */ - err(1, "FAILED LISTING MICROSD ROOT DIRECTORY"); - } - - return 0; -} -#if 0 -int -test_file(int argc, char *argv[]) -{ - const iterations = 1024; - - /* check if microSD card is mounted */ - struct stat buffer; - if (stat("/fs/microsd/", &buffer)) { - warnx("no microSD card mounted, aborting file test"); + warnx("FAILED LISTING MICROSD ROOT DIRECTORY"); return 1; } - uint8_t buf[512]; - hrt_abstime start, end; - perf_counter_t wperf = perf_alloc(PC_ELAPSED, "SD writes"); - - int fd = open("/fs/microsd/testfile", O_TRUNC | O_WRONLY | O_CREAT); - memset(buf, 0, sizeof(buf)); - - start = hrt_absolute_time(); - for (unsigned i = 0; i < iterations; i++) { - perf_begin(wperf); - write(fd, buf, sizeof(buf)); - perf_end(wperf); - } - end = hrt_absolute_time(); - - close(fd); - - unlink("/fs/microsd/testfile"); - - warnx("%dKiB in %llu microseconds", iterations / 2, end - start); - perf_print_counter(wperf); - perf_free(wperf); - - warnx("running unlink test"); - - /* ensure that common commands do not run against file count limits */ - for (unsigned i = 0; i < 64; i++) { - - warnx("unlink iteration #%u", i); - - int fd = open("/fs/microsd/testfile", O_TRUNC | O_WRONLY | O_CREAT); - if (fd < 0) - errx(1, "failed opening test file before unlink()"); - int ret = write(fd, buf, sizeof(buf)); - if (ret < 0) - errx(1, "failed writing test file before unlink()"); - close(fd); - - ret = unlink("/fs/microsd/testfile"); - if (ret != OK) - errx(1, "failed unlinking test file"); - - fd = open("/fs/microsd/testfile", O_TRUNC | O_WRONLY | O_CREAT); - if (fd < 0) - errx(1, "failed opening test file after unlink()"); - ret = write(fd, buf, sizeof(buf)); - if (ret < 0) - errx(1, "failed writing test file after unlink()"); - close(fd); - } - return 0; } -#endif diff --git a/src/systemcmds/tests/test_mount.c b/src/systemcmds/tests/test_mount.c new file mode 100644 index 000000000..44e34d9ef --- /dev/null +++ b/src/systemcmds/tests/test_mount.c @@ -0,0 +1,289 @@ +/**************************************************************************** + * + * Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file test_mount.c + * + * Device mount / unmount stress test + * + * @author Lorenz Meier <lm@inf.ethz.ch> + */ + +#include <sys/stat.h> +#include <dirent.h> +#include <stdio.h> +#include <stddef.h> +#include <unistd.h> +#include <fcntl.h> +#include <systemlib/err.h> +#include <systemlib/systemlib.h> +#include <systemlib/perf_counter.h> +#include <string.h> + +#include <drivers/drv_hrt.h> + +#include "tests.h" + +const int fsync_tries = 1; +const int abort_tries = 10; + +int +test_mount(int argc, char *argv[]) +{ + const unsigned iterations = 2000; + const unsigned alignments = 10; + + const char* cmd_filename = "/fs/microsd/mount_test_cmds.txt"; + + + /* check if microSD card is mounted */ + struct stat buffer; + if (stat("/fs/microsd/", &buffer)) { + warnx("no microSD card mounted, aborting file test"); + return 1; + } + + /* list directory */ + DIR *d; + struct dirent *dir; + d = opendir("/fs/microsd"); + if (d) { + + while ((dir = readdir(d)) != NULL) { + //printf("%s\n", dir->d_name); + } + + closedir(d); + + warnx("directory listing ok (FS mounted and readable)"); + + } else { + /* failed opening dir */ + warnx("FAILED LISTING MICROSD ROOT DIRECTORY"); + + if (stat(cmd_filename, &buffer) == OK) { + (void)unlink(cmd_filename); + } + + return 1; + } + + /* read current test status from file, write test instructions for next round */ + + /* initial values */ + int it_left_fsync = fsync_tries; + int it_left_abort = abort_tries; + + int cmd_fd; + if (stat(cmd_filename, &buffer) == OK) { + + /* command file exists, read off state */ + cmd_fd = open(cmd_filename, O_RDWR | O_NONBLOCK); + char buf[64]; + int ret = read(cmd_fd, buf, sizeof(buf)); + + if (ret > 0) { + int count = 0; + ret = sscanf(buf, "TEST: %u %u %n", &it_left_fsync, &it_left_abort, &count); + } else { + buf[0] = '\0'; + } + + if (it_left_fsync > fsync_tries) + it_left_fsync = fsync_tries; + + if (it_left_abort > abort_tries) + it_left_abort = abort_tries; + + warnx("Iterations left: #%d / #%d of %d / %d\n(%s)", it_left_fsync, it_left_abort, + fsync_tries, abort_tries, buf); + + int it_left_fsync_prev = it_left_fsync; + + /* now write again what to do next */ + if (it_left_fsync > 0) + it_left_fsync--; + + if (it_left_fsync == 0 && it_left_abort > 0) { + + it_left_abort--; + + /* announce mode switch */ + if (it_left_fsync_prev != it_left_fsync && it_left_fsync == 0) { + warnx("\n SUCCESSFULLY PASSED FSYNC'ED WRITES, CONTINUTING WITHOUT FSYNC"); + fsync(stdout); + fsync(stderr); + usleep(20000); + } + + } + + if (it_left_abort == 0) { + (void)unlink(cmd_filename); + return 0; + } + + } else { + + /* this must be the first iteration, do something */ + cmd_fd = open(cmd_filename, O_TRUNC | O_WRONLY | O_CREAT); + + warnx("First iteration of file test\n"); + } + + char buf[64]; + int wret = sprintf(buf, "TEST: %d %d ", it_left_fsync, it_left_abort); + lseek(cmd_fd, 0, SEEK_SET); + write(cmd_fd, buf, strlen(buf) + 1); + fsync(cmd_fd); + + /* perform tests for a range of chunk sizes */ + unsigned chunk_sizes[] = {32, 64, 128, 256, 512, 600, 1200}; + + for (unsigned c = 0; c < (sizeof(chunk_sizes) / sizeof(chunk_sizes[0])); c++) { + + printf("\n\n====== FILE TEST: %u bytes chunks (%s) ======\n", chunk_sizes[c], (it_left_fsync > 0) ? "FSYNC" : "NO FSYNC"); + printf("unpower the system immediately (within 0.5s) when the hash (#) sign appears\n"); + fsync(stdout); + fsync(stderr); + usleep(50000); + + for (unsigned a = 0; a < alignments; a++) { + + printf("."); + + uint8_t write_buf[chunk_sizes[c] + alignments] __attribute__((aligned(64))); + + /* fill write buffer with known values */ + for (int i = 0; i < sizeof(write_buf); i++) { + /* this will wrap, but we just need a known value with spacing */ + write_buf[i] = i+11; + } + + uint8_t read_buf[chunk_sizes[c] + alignments] __attribute__((aligned(64))); + hrt_abstime start, end; + + int fd = open("/fs/microsd/testfile", O_TRUNC | O_WRONLY | O_CREAT); + + start = hrt_absolute_time(); + for (unsigned i = 0; i < iterations; i++) { + + int wret = write(fd, write_buf + a, chunk_sizes[c]); + + if (wret != chunk_sizes[c]) { + warn("WRITE ERROR!"); + + if ((0x3 & (uintptr_t)(write_buf + a))) + warnx("memory is unaligned, align shift: %d", a); + + return 1; + + } + + if (it_left_fsync > 0) { + fsync(fd); + } else { + printf("#"); + fsync(stdout); + fsync(stderr); + } + } + + if (it_left_fsync > 0) { + printf("#"); + } + + printf("."); + fsync(stdout); + fsync(stderr); + usleep(200000); + + end = hrt_absolute_time(); + + close(fd); + fd = open("/fs/microsd/testfile", O_RDONLY); + + /* read back data for validation */ + for (unsigned i = 0; i < iterations; i++) { + int rret = read(fd, read_buf, chunk_sizes[c]); + + if (rret != chunk_sizes[c]) { + warnx("READ ERROR!"); + return 1; + } + + /* compare value */ + bool compare_ok = true; + + for (int j = 0; j < chunk_sizes[c]; j++) { + if (read_buf[j] != write_buf[j + a]) { + warnx("COMPARISON ERROR: byte %d, align shift: %d", j, a); + compare_ok = false; + break; + } + } + + if (!compare_ok) { + warnx("ABORTING FURTHER COMPARISON DUE TO ERROR"); + return 1; + } + + } + + int ret = unlink("/fs/microsd/testfile"); + close(fd); + + if (ret) { + warnx("UNLINKING FILE FAILED"); + return 1; + } + + } + } + + fsync(stdout); + fsync(stderr); + usleep(20000); + + + + /* we always reboot for the next test if we get here */ + warnx("Iteration done, rebooting.."); + fsync(stdout); + fsync(stderr); + usleep(50000); + systemreset(false); + + /* never going to get here */ + return 0; +} diff --git a/src/systemcmds/tests/tests.h b/src/systemcmds/tests/tests.h index a57d04be3..bec13bd30 100644 --- a/src/systemcmds/tests/tests.h +++ b/src/systemcmds/tests/tests.h @@ -109,6 +109,7 @@ extern int test_bson(int argc, char *argv[]); extern int test_file(int argc, char *argv[]); extern int test_mixer(int argc, char *argv[]); extern int test_rc(int argc, char *argv[]); +extern int test_mount(int argc, char *argv[]); __END_DECLS diff --git a/src/systemcmds/tests/tests_main.c b/src/systemcmds/tests/tests_main.c index 1088a4407..84535126f 100644 --- a/src/systemcmds/tests/tests_main.c +++ b/src/systemcmds/tests/tests_main.c @@ -106,6 +106,7 @@ const struct { {"file", test_file, 0}, {"mixer", test_mixer, OPT_NOJIGTEST | OPT_NOALLTEST}, {"rc", test_rc, OPT_NOJIGTEST | OPT_NOALLTEST}, + {"mount", test_mount, OPT_NOJIGTEST | OPT_NOALLTEST}, {"help", test_help, OPT_NOALLTEST | OPT_NOHELP | OPT_NOJIGTEST}, {NULL, NULL, 0} }; |