diff options
author | Lorenz Meier <lm@inf.ethz.ch> | 2014-01-15 07:43:17 +0100 |
---|---|---|
committer | Lorenz Meier <lm@inf.ethz.ch> | 2014-01-15 07:43:17 +0100 |
commit | f3cd83e804e8fffc5e71e4d6443729184b3e7909 (patch) | |
tree | 13ac8af24705fe5f8107f3f46fd989e49fdd00d4 /src | |
parent | 9612514a3f59cfedbd7b29c9e4f30c1edf1c7345 (diff) | |
parent | cd72f564eff13d831d6773e85818b65f708d3323 (diff) | |
download | px4-firmware-f3cd83e804e8fffc5e71e4d6443729184b3e7909.tar.gz px4-firmware-f3cd83e804e8fffc5e71e4d6443729184b3e7909.tar.bz2 px4-firmware-f3cd83e804e8fffc5e71e4d6443729184b3e7909.zip |
Merged master into mixer unit tests branch
Diffstat (limited to 'src')
57 files changed, 2644 insertions, 972 deletions
diff --git a/src/drivers/boards/px4fmu-v1/board_config.h b/src/drivers/boards/px4fmu-v1/board_config.h index 27621211a..02c26b5c0 100644 --- a/src/drivers/boards/px4fmu-v1/board_config.h +++ b/src/drivers/boards/px4fmu-v1/board_config.h @@ -1,6 +1,6 @@ /**************************************************************************** * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -34,7 +34,7 @@ /** * @file board_config.h * - * PX4FMU internal definitions + * PX4FMUv1 internal definitions */ #pragma once @@ -60,6 +60,7 @@ __BEGIN_DECLS /* PX4IO connection configuration */ #define PX4IO_SERIAL_DEVICE "/dev/ttyS2" +#define UDID_START 0x1FFF7A10 //#ifdef CONFIG_STM32_SPI2 //# error "SPI2 is not supported on this board" @@ -180,7 +181,7 @@ __BEGIN_DECLS #define HRT_TIMER 1 /* use timer1 for the HRT */ #define HRT_TIMER_CHANNEL 1 /* use capture/compare channel */ #define HRT_PPM_CHANNEL 3 /* use capture/compare channel 3 */ -#define GPIO_PPM_IN (GPIO_ALT|GPIO_AF1|GPIO_SPEED_50MHz|GPIO_PULLUP|GPIO_PORTA|GPIO_PIN10) +#define GPIO_PPM_IN (GPIO_ALT|GPIO_AF1|GPIO_PULLUP|GPIO_PORTA|GPIO_PIN10) /**************************************************************************************************** * Public Types diff --git a/src/drivers/boards/px4fmu-v2/board_config.h b/src/drivers/boards/px4fmu-v2/board_config.h index 7ab63953f..264d911f3 100644 --- a/src/drivers/boards/px4fmu-v2/board_config.h +++ b/src/drivers/boards/px4fmu-v2/board_config.h @@ -1,6 +1,6 @@ /**************************************************************************** * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * Copyright (c) 2013, 2014 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -34,7 +34,7 @@ /** * @file board_config.h * - * PX4FMU internal definitions + * PX4FMUv2 internal definitions */ #pragma once @@ -52,6 +52,8 @@ __BEGIN_DECLS /* these headers are not C++ safe */ #include <stm32.h> #include <arch/board/board.h> + +#define UDID_START 0x1FFF7A10 /**************************************************************************************************** * Definitions @@ -82,21 +84,21 @@ __BEGIN_DECLS #define GPIO_EXTI_MPU_DRDY (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTD|GPIO_PIN15) /* Data ready pins off */ -#define GPIO_GYRO_DRDY_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTB|GPIO_PIN0) -#define GPIO_MAG_DRDY_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTB|GPIO_PIN1) -#define GPIO_ACCEL_DRDY_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTB|GPIO_PIN4) -#define GPIO_EXTI_MPU_DRDY (GPIO_INPUT|GPIO_PULLDOWN|GPIO_EXTI|GPIO_PORTD|GPIO_PIN15) +#define GPIO_GYRO_DRDY_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTB|GPIO_PIN0) +#define GPIO_MAG_DRDY_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTB|GPIO_PIN1) +#define GPIO_ACCEL_DRDY_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTB|GPIO_PIN4) +#define GPIO_EXTI_MPU_DRDY_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_EXTI|GPIO_PORTD|GPIO_PIN15) /* SPI1 off */ -#define GPIO_SPI1_SCK_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTA|GPIO_PIN5) -#define GPIO_SPI1_MISO_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTA|GPIO_PIN6) -#define GPIO_SPI1_MOSI_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTA|GPIO_PIN7) +#define GPIO_SPI1_SCK_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTA|GPIO_PIN5) +#define GPIO_SPI1_MISO_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTA|GPIO_PIN6) +#define GPIO_SPI1_MOSI_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTA|GPIO_PIN7) /* SPI1 chip selects off */ -#define GPIO_SPI_CS_GYRO_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTC|GPIO_PIN13) -#define GPIO_SPI_CS_ACCEL_MAG_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTC|GPIO_PIN15) -#define GPIO_SPI_CS_BARO_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTD|GPIO_PIN7) -#define GPIO_SPI_CS_MPU (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTC|GPIO_PIN2) +#define GPIO_SPI_CS_GYRO_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTC|GPIO_PIN13) +#define GPIO_SPI_CS_ACCEL_MAG_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTC|GPIO_PIN15) +#define GPIO_SPI_CS_BARO_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTD|GPIO_PIN7) +#define GPIO_SPI_CS_MPU_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTC|GPIO_PIN2) /* SPI chip selects */ #define GPIO_SPI_CS_GYRO (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN13) @@ -177,7 +179,7 @@ __BEGIN_DECLS * * PA9 OTG_FS_VBUS VBUS sensing (also connected to the green LED) */ -#define GPIO_OTGFS_VBUS (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_OPENDRAIN|GPIO_PORTA|GPIO_PIN9) +#define GPIO_OTGFS_VBUS (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_OPENDRAIN|GPIO_PORTA|GPIO_PIN9) /* High-resolution timer */ #define HRT_TIMER 8 /* use timer8 for the HRT */ diff --git a/src/drivers/boards/px4fmu-v2/px4fmu2_init.c b/src/drivers/boards/px4fmu-v2/px4fmu2_init.c index 269ec238e..71414d62c 100644 --- a/src/drivers/boards/px4fmu-v2/px4fmu2_init.c +++ b/src/drivers/boards/px4fmu-v2/px4fmu2_init.c @@ -282,7 +282,7 @@ __EXPORT int nsh_archinitialize(void) SPI_SELECT(spi1, PX4_SPIDEV_MPU, false); up_udelay(20); - message("[boot] Successfully initialized SPI port 1\n"); + message("[boot] Initialized SPI port 1 (SENSORS)\n"); /* Get the SPI port for the FRAM */ @@ -294,20 +294,23 @@ __EXPORT int nsh_archinitialize(void) return -ENODEV; } - /* Default SPI2 to 37.5 MHz (F4 max) and de-assert the known chip selects. */ - SPI_SETFREQUENCY(spi2, 375000000); + /* Default SPI2 to 37.5 MHz (40 MHz rounded to nearest valid divider, F4 max) + * and de-assert the known chip selects. */ + + // XXX start with 10.4 MHz in FRAM usage and go up to 37.5 once validated + SPI_SETFREQUENCY(spi2, 12 * 1000 * 1000); SPI_SETBITS(spi2, 8); SPI_SETMODE(spi2, SPIDEV_MODE3); SPI_SELECT(spi2, SPIDEV_FLASH, false); - message("[boot] Successfully initialized SPI port 2\n"); + message("[boot] Initialized SPI port 2 (RAMTRON FRAM)\n"); #ifdef CONFIG_MMCSD /* First, get an instance of the SDIO interface */ sdio = sdio_initialize(CONFIG_NSH_MMCSDSLOTNO); if (!sdio) { - message("nsh_archinitialize: Failed to initialize SDIO slot %d\n", + message("[boot] Failed to initialize SDIO slot %d\n", CONFIG_NSH_MMCSDSLOTNO); return -ENODEV; } @@ -315,7 +318,7 @@ __EXPORT int nsh_archinitialize(void) /* Now bind the SDIO interface to the MMC/SD driver */ int ret = mmcsd_slotinitialize(CONFIG_NSH_MMCSDMINOR, sdio); if (ret != OK) { - message("nsh_archinitialize: Failed to bind SDIO to the MMC/SD driver: %d\n", ret); + message("[boot] Failed to bind SDIO to the MMC/SD driver: %d\n", ret); return ret; } diff --git a/src/drivers/boards/px4io-v1/board_config.h b/src/drivers/boards/px4io-v1/board_config.h index 48aadbd76..c3f39addf 100644 --- a/src/drivers/boards/px4io-v1/board_config.h +++ b/src/drivers/boards/px4io-v1/board_config.h @@ -1,6 +1,6 @@ /**************************************************************************** * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -92,4 +92,4 @@ #define HRT_TIMER 1 /* use timer1 for the HRT */ #define HRT_TIMER_CHANNEL 2 /* use capture/compare channel 2 */ #define HRT_PPM_CHANNEL 1 /* use capture/compare channel 1 */ -#define GPIO_PPM_IN GPIO_TIM1_CH1IN +#define GPIO_PPM_IN (GPIO_ALT|GPIO_CNF_INPULLUP|GPIO_PORTE|GPIO_PIN9) diff --git a/src/drivers/boards/px4io-v2/board_config.h b/src/drivers/boards/px4io-v2/board_config.h index 4d41d0d07..8da555211 100644 --- a/src/drivers/boards/px4io-v2/board_config.h +++ b/src/drivers/boards/px4io-v2/board_config.h @@ -1,6 +1,6 @@ /**************************************************************************** * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * Copyright (c) 2013, 2014 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -32,7 +32,7 @@ ****************************************************************************/ /** - * @file px4iov2_internal.h + * @file board_config.h * * PX4IOV2 internal definitions */ @@ -122,7 +122,7 @@ #define HRT_TIMER 1 /* use timer1 for the HRT */ #define HRT_TIMER_CHANNEL 2 /* use capture/compare channel 2 */ #define HRT_PPM_CHANNEL 1 /* use capture/compare channel 1 */ -#define GPIO_PPM_IN GPIO_TIM1_CH1IN +#define GPIO_PPM_IN (GPIO_ALT|GPIO_CNF_INPULLUP|GPIO_PORTE|GPIO_PIN9) /* LED definitions ******************************************************************/ /* PX4 has two LEDs that we will encode as: */ diff --git a/src/drivers/drv_rc_input.h b/src/drivers/drv_rc_input.h index 03f1dfbe5..6b87141e9 100644 --- a/src/drivers/drv_rc_input.h +++ b/src/drivers/drv_rc_input.h @@ -60,7 +60,7 @@ /** * Maximum number of R/C input channels in the system. S.Bus has up to 18 channels. */ -#define RC_INPUT_MAX_CHANNELS 20 +#define RC_INPUT_MAX_CHANNELS 18 /** * Input signal type, value is a control position from zero to 100 diff --git a/src/drivers/frsky_telemetry/frsky_data.c b/src/drivers/frsky_telemetry/frsky_data.c new file mode 100644 index 000000000..63b2d2d29 --- /dev/null +++ b/src/drivers/frsky_telemetry/frsky_data.c @@ -0,0 +1,289 @@ +/**************************************************************************** + * + * Copyright (c) 2013-2014 PX4 Development Team. All rights reserved. + * Author: Stefan Rado <px4@sradonia.net> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file frsky_data.c + * @author Stefan Rado <px4@sradonia.net> + * + * FrSky telemetry implementation. + * + */ + +#include "frsky_data.h" + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> +#include <arch/math.h> +#include <geo/geo.h> + +#include <uORB/topics/battery_status.h> +#include <uORB/topics/sensor_combined.h> +#include <uORB/topics/vehicle_global_position.h> +#include <uORB/topics/vehicle_status.h> + +/* FrSky sensor hub data IDs */ +#define FRSKY_ID_GPS_ALT_BP 0x01 +#define FRSKY_ID_TEMP1 0x02 +#define FRSKY_ID_RPM 0x03 +#define FRSKY_ID_FUEL 0x04 +#define FRSKY_ID_TEMP2 0x05 +#define FRSKY_ID_VOLTS 0x06 +#define FRSKY_ID_GPS_ALT_AP 0x09 +#define FRSKY_ID_BARO_ALT_BP 0x10 +#define FRSKY_ID_GPS_SPEED_BP 0x11 +#define FRSKY_ID_GPS_LONG_BP 0x12 +#define FRSKY_ID_GPS_LAT_BP 0x13 +#define FRSKY_ID_GPS_COURS_BP 0x14 +#define FRSKY_ID_GPS_DAY_MONTH 0x15 +#define FRSKY_ID_GPS_YEAR 0x16 +#define FRSKY_ID_GPS_HOUR_MIN 0x17 +#define FRSKY_ID_GPS_SEC 0x18 +#define FRSKY_ID_GPS_SPEED_AP 0x19 +#define FRSKY_ID_GPS_LONG_AP 0x1A +#define FRSKY_ID_GPS_LAT_AP 0x1B +#define FRSKY_ID_GPS_COURS_AP 0x1C +#define FRSKY_ID_BARO_ALT_AP 0x21 +#define FRSKY_ID_GPS_LONG_EW 0x22 +#define FRSKY_ID_GPS_LAT_NS 0x23 +#define FRSKY_ID_ACCEL_X 0x24 +#define FRSKY_ID_ACCEL_Y 0x25 +#define FRSKY_ID_ACCEL_Z 0x26 +#define FRSKY_ID_CURRENT 0x28 +#define FRSKY_ID_VARIO 0x30 +#define FRSKY_ID_VFAS 0x39 +#define FRSKY_ID_VOLTS_BP 0x3A +#define FRSKY_ID_VOLTS_AP 0x3B + +#define frac(f) (f - (int)f) + +static int battery_sub = -1; +static int sensor_sub = -1; +static int global_position_sub = -1; +static int vehicle_status_sub = -1; + +/** + * Initializes the uORB subscriptions. + */ +void frsky_init() +{ + battery_sub = orb_subscribe(ORB_ID(battery_status)); + global_position_sub = orb_subscribe(ORB_ID(vehicle_global_position)); + sensor_sub = orb_subscribe(ORB_ID(sensor_combined)); + vehicle_status_sub = orb_subscribe(ORB_ID(vehicle_status)); +} + +/** + * Sends a 0x5E start/stop byte. + */ +static void frsky_send_startstop(int uart) +{ + static const uint8_t c = 0x5E; + write(uart, &c, sizeof(c)); +} + +/** + * Sends one byte, performing byte-stuffing if necessary. + */ +static void frsky_send_byte(int uart, uint8_t value) +{ + const uint8_t x5E[] = { 0x5D, 0x3E }; + const uint8_t x5D[] = { 0x5D, 0x3D }; + + switch (value) { + case 0x5E: + write(uart, x5E, sizeof(x5E)); + break; + + case 0x5D: + write(uart, x5D, sizeof(x5D)); + break; + + default: + write(uart, &value, sizeof(value)); + break; + } +} + +/** + * Sends one data id/value pair. + */ +static void frsky_send_data(int uart, uint8_t id, int16_t data) +{ + /* Cast data to unsigned, because signed shift might behave incorrectly */ + uint16_t udata = data; + + frsky_send_startstop(uart); + + frsky_send_byte(uart, id); + frsky_send_byte(uart, udata); /* LSB */ + frsky_send_byte(uart, udata >> 8); /* MSB */ +} + +/** + * Sends frame 1 (every 200ms): + * acceleration values, barometer altitude, temperature, battery voltage & current + */ +void frsky_send_frame1(int uart) +{ + /* get a local copy of the current sensor values */ + struct sensor_combined_s raw; + memset(&raw, 0, sizeof(raw)); + orb_copy(ORB_ID(sensor_combined), sensor_sub, &raw); + + /* get a local copy of the battery data */ + struct battery_status_s battery; + memset(&battery, 0, sizeof(battery)); + orb_copy(ORB_ID(battery_status), battery_sub, &battery); + + /* send formatted frame */ + frsky_send_data(uart, FRSKY_ID_ACCEL_X, + roundf(raw.accelerometer_m_s2[0] * 1000.0f)); + frsky_send_data(uart, FRSKY_ID_ACCEL_Y, + roundf(raw.accelerometer_m_s2[1] * 1000.0f)); + frsky_send_data(uart, FRSKY_ID_ACCEL_Z, + roundf(raw.accelerometer_m_s2[2] * 1000.0f)); + + frsky_send_data(uart, FRSKY_ID_BARO_ALT_BP, + raw.baro_alt_meter); + frsky_send_data(uart, FRSKY_ID_BARO_ALT_AP, + roundf(frac(raw.baro_alt_meter) * 100.0f)); + + frsky_send_data(uart, FRSKY_ID_TEMP1, + roundf(raw.baro_temp_celcius)); + + frsky_send_data(uart, FRSKY_ID_VFAS, + roundf(battery.voltage_v * 10.0f)); + frsky_send_data(uart, FRSKY_ID_CURRENT, + (battery.current_a < 0) ? 0 : roundf(battery.current_a * 10.0f)); + + frsky_send_startstop(uart); +} + +/** + * Formats the decimal latitude/longitude to the required degrees/minutes/seconds. + */ +static float frsky_format_gps(float dec) +{ + float dms_deg = (int) dec; + float dec_deg = dec - dms_deg; + float dms_min = (int) (dec_deg * 60); + float dec_min = (dec_deg * 60) - dms_min; + float dms_sec = dec_min * 60; + + return (dms_deg * 100.0f) + dms_min + (dms_sec / 100.0f); +} + +/** + * Sends frame 2 (every 1000ms): + * GPS course, latitude, longitude, ground speed, GPS altitude, remaining battery level + */ +void frsky_send_frame2(int uart) +{ + /* get a local copy of the global position data */ + struct vehicle_global_position_s global_pos; + memset(&global_pos, 0, sizeof(global_pos)); + orb_copy(ORB_ID(vehicle_global_position), global_position_sub, &global_pos); + + /* get a local copy of the vehicle status data */ + struct vehicle_status_s vehicle_status; + memset(&vehicle_status, 0, sizeof(vehicle_status)); + orb_copy(ORB_ID(vehicle_status), vehicle_status_sub, &vehicle_status); + + /* send formatted frame */ + float course = 0, lat = 0, lon = 0, speed = 0, alt = 0; + char lat_ns = 0, lon_ew = 0; + int sec = 0; + if (global_pos.valid) { + time_t time_gps = global_pos.time_gps_usec / 1000000; + struct tm *tm_gps = gmtime(&time_gps); + + course = (global_pos.yaw + M_PI_F) / M_PI_F * 180.0f; + lat = frsky_format_gps(abs(global_pos.lat) / 10000000.0f); + lat_ns = (global_pos.lat < 0) ? 'S' : 'N'; + lon = frsky_format_gps(abs(global_pos.lon) / 10000000.0f); + lon_ew = (global_pos.lon < 0) ? 'W' : 'E'; + speed = sqrtf(global_pos.vx * global_pos.vx + global_pos.vy * global_pos.vy) + * 25.0f / 46.0f; + alt = global_pos.alt; + sec = tm_gps->tm_sec; + } + + frsky_send_data(uart, FRSKY_ID_GPS_COURS_BP, course); + frsky_send_data(uart, FRSKY_ID_GPS_COURS_AP, frac(course) * 1000.0f); + + frsky_send_data(uart, FRSKY_ID_GPS_LAT_BP, lat); + frsky_send_data(uart, FRSKY_ID_GPS_LAT_AP, frac(lat) * 10000.0f); + frsky_send_data(uart, FRSKY_ID_GPS_LAT_NS, lat_ns); + + frsky_send_data(uart, FRSKY_ID_GPS_LONG_BP, lon); + frsky_send_data(uart, FRSKY_ID_GPS_LONG_AP, frac(lon) * 10000.0f); + frsky_send_data(uart, FRSKY_ID_GPS_LONG_EW, lon_ew); + + frsky_send_data(uart, FRSKY_ID_GPS_SPEED_BP, speed); + frsky_send_data(uart, FRSKY_ID_GPS_SPEED_AP, frac(speed) * 100.0f); + + frsky_send_data(uart, FRSKY_ID_GPS_ALT_BP, alt); + frsky_send_data(uart, FRSKY_ID_GPS_ALT_AP, frac(alt) * 100.0f); + + frsky_send_data(uart, FRSKY_ID_FUEL, + roundf(vehicle_status.battery_remaining * 100.0f)); + + frsky_send_data(uart, FRSKY_ID_GPS_SEC, sec); + + frsky_send_startstop(uart); +} + +/** + * Sends frame 3 (every 5000ms): + * GPS date & time + */ +void frsky_send_frame3(int uart) +{ + /* get a local copy of the battery data */ + struct vehicle_global_position_s global_pos; + memset(&global_pos, 0, sizeof(global_pos)); + orb_copy(ORB_ID(vehicle_global_position), global_position_sub, &global_pos); + + /* send formatted frame */ + time_t time_gps = global_pos.time_gps_usec / 1000000; + struct tm *tm_gps = gmtime(&time_gps); + uint16_t hour_min = (tm_gps->tm_min << 8) | (tm_gps->tm_hour & 0xff); + frsky_send_data(uart, FRSKY_ID_GPS_DAY_MONTH, tm_gps->tm_mday); + frsky_send_data(uart, FRSKY_ID_GPS_YEAR, tm_gps->tm_year); + frsky_send_data(uart, FRSKY_ID_GPS_HOUR_MIN, hour_min); + frsky_send_data(uart, FRSKY_ID_GPS_SEC, tm_gps->tm_sec); + + frsky_send_startstop(uart); +} diff --git a/src/drivers/frsky_telemetry/frsky_data.h b/src/drivers/frsky_telemetry/frsky_data.h new file mode 100644 index 000000000..a7d9eee53 --- /dev/null +++ b/src/drivers/frsky_telemetry/frsky_data.h @@ -0,0 +1,51 @@ +/**************************************************************************** + * + * Copyright (c) 2013-2014 PX4 Development Team. All rights reserved. + * Author: Stefan Rado <px4@sradonia.net> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file frsky_data.h + * @author Stefan Rado <px4@sradonia.net> + * + * FrSky telemetry implementation. + * + */ +#ifndef _FRSKY_DATA_H +#define _FRSKY_DATA_H + +// Public functions +void frsky_init(void); +void frsky_send_frame1(int uart); +void frsky_send_frame2(int uart); +void frsky_send_frame3(int uart); + +#endif /* _FRSKY_TELEMETRY_H */ diff --git a/src/drivers/frsky_telemetry/frsky_telemetry.c b/src/drivers/frsky_telemetry/frsky_telemetry.c new file mode 100644 index 000000000..7b08ca69e --- /dev/null +++ b/src/drivers/frsky_telemetry/frsky_telemetry.c @@ -0,0 +1,266 @@ +/**************************************************************************** + * + * Copyright (c) 2013-2014 PX4 Development Team. All rights reserved. + * Author: Stefan Rado <px4@sradonia.net> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file frsky_telemetry.c + * @author Stefan Rado <px4@sradonia.net> + * + * FrSky telemetry implementation. + * + * This daemon emulates an FrSky sensor hub by periodically sending data + * packets to an attached FrSky receiver. + * + */ + +#include <stdlib.h> +#include <stdio.h> +#include <stdbool.h> +#include <string.h> +#include <sys/types.h> +#include <fcntl.h> +#include <unistd.h> +#include <systemlib/err.h> +#include <systemlib/systemlib.h> +#include <termios.h> + +#include "frsky_data.h" + + +/* thread state */ +static volatile bool thread_should_exit = false; +static volatile bool thread_running = false; +static int frsky_task; + +/* functions */ +static int frsky_open_uart(const char *uart_name, struct termios *uart_config_original); +static void usage(void); +static int frsky_telemetry_thread_main(int argc, char *argv[]); +__EXPORT int frsky_telemetry_main(int argc, char *argv[]); + + +/** + * Opens the UART device and sets all required serial parameters. + */ +static int frsky_open_uart(const char *uart_name, struct termios *uart_config_original) +{ + /* Open UART */ + const int uart = open(uart_name, O_WRONLY | O_NOCTTY); + + if (uart < 0) { + err(1, "Error opening port: %s", uart_name); + } + + /* Back up the original UART configuration to restore it after exit */ + int termios_state; + if ((termios_state = tcgetattr(uart, uart_config_original)) < 0) { + warnx("ERROR get termios config %s: %d\n", uart_name, termios_state); + close(uart); + return -1; + } + + /* Fill the struct for the new configuration */ + struct termios uart_config; + tcgetattr(uart, &uart_config); + + /* Disable output post-processing */ + uart_config.c_oflag &= ~OPOST; + + /* Set baud rate */ + static const speed_t speed = B9600; + + if (cfsetispeed(&uart_config, speed) < 0 || cfsetospeed(&uart_config, speed) < 0) { + warnx("ERROR setting baudrate / termios config for %s: %d (cfsetispeed, cfsetospeed)\n", uart_name, termios_state); + close(uart); + return -1; + } + + if ((termios_state = tcsetattr(uart, TCSANOW, &uart_config)) < 0) { + warnx("ERROR setting baudrate / termios config for %s (tcsetattr)\n", uart_name); + close(uart); + return -1; + } + + return uart; +} + +/** + * Print command usage information + */ +static void usage() +{ + fprintf(stderr, + "usage: frsky_telemetry start [-d <devicename>]\n" + " frsky_telemetry stop\n" + " frsky_telemetry status\n"); + exit(1); +} + +/** + * The daemon thread. + */ +static int frsky_telemetry_thread_main(int argc, char *argv[]) +{ + /* Default values for arguments */ + char *device_name = "/dev/ttyS1"; /* USART2 */ + + /* Work around some stupidity in task_create's argv handling */ + argc -= 2; + argv += 2; + + int ch; + while ((ch = getopt(argc, argv, "d:")) != EOF) { + switch (ch) { + case 'd': + device_name = optarg; + break; + + default: + usage(); + break; + } + } + + /* Print welcome text */ + warnx("FrSky telemetry interface starting..."); + + /* Open UART */ + struct termios uart_config_original; + const int uart = frsky_open_uart(device_name, &uart_config_original); + + if (uart < 0) + err(1, "could not open %s", device_name); + + /* Subscribe to topics */ + frsky_init(); + + thread_running = true; + + /* Main thread loop */ + unsigned int iteration = 0; + while (!thread_should_exit) { + + /* Sleep 200 ms */ + usleep(200000); + + /* Send frame 1 (every 200ms): acceleration values, altitude (vario), temperatures, current & voltages, RPM */ + frsky_send_frame1(uart); + + /* Send frame 2 (every 1000ms): course, latitude, longitude, speed, altitude (GPS), fuel level */ + if (iteration % 5 == 0) + { + frsky_send_frame2(uart); + } + + /* Send frame 3 (every 5000ms): date, time */ + if (iteration % 25 == 0) + { + frsky_send_frame3(uart); + + iteration = 0; + } + + iteration++; + } + + /* Reset the UART flags to original state */ + tcsetattr(uart, TCSANOW, &uart_config_original); + close(uart); + + thread_running = false; + return 0; +} + +/** + * The main command function. + * Processes command line arguments and starts the daemon. + */ +int frsky_telemetry_main(int argc, char *argv[]) +{ + if (argc < 2) { + warnx("missing command"); + usage(); + } + + if (!strcmp(argv[1], "start")) { + + /* this is not an error */ + if (thread_running) + errx(0, "frsky_telemetry already running"); + + thread_should_exit = false; + frsky_task = task_spawn_cmd("frsky_telemetry", + SCHED_DEFAULT, + SCHED_PRIORITY_DEFAULT, + 2048, + frsky_telemetry_thread_main, + (const char **)argv); + + while (!thread_running) { + usleep(200); + } + + exit(0); + } + + if (!strcmp(argv[1], "stop")) { + + /* this is not an error */ + if (!thread_running) + errx(0, "frsky_telemetry already stopped"); + + thread_should_exit = true; + + while (thread_running) { + usleep(200000); + warnx("."); + } + + warnx("terminated."); + exit(0); + } + + if (!strcmp(argv[1], "status")) { + if (thread_running) { + errx(0, "running"); + + } else { + errx(1, "not running"); + } + } + + warnx("unrecognized command"); + usage(); + /* not getting here */ + return 0; +} diff --git a/src/systemcmds/eeprom/module.mk b/src/drivers/frsky_telemetry/module.mk index 07f3945be..1632c74f7 100644 --- a/src/systemcmds/eeprom/module.mk +++ b/src/drivers/frsky_telemetry/module.mk @@ -1,6 +1,6 @@ ############################################################################ # -# Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. +# Copyright (c) 2013-2014 PX4 Development Team. All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions @@ -32,8 +32,10 @@ ############################################################################ # -# EEPROM file system driver +# FrSky telemetry application. # -MODULE_COMMAND = eeprom -SRCS = 24xxxx_mtd.c eeprom.c +MODULE_COMMAND = frsky_telemetry + +SRCS = frsky_data.c \ + frsky_telemetry.c diff --git a/src/drivers/gps/gps.cpp b/src/drivers/gps/gps.cpp index fc500a9ec..6b72d560f 100644 --- a/src/drivers/gps/gps.cpp +++ b/src/drivers/gps/gps.cpp @@ -85,7 +85,7 @@ static const int ERROR = -1; class GPS : public device::CDev { public: - GPS(const char *uart_path); + GPS(const char *uart_path, bool fake_gps); virtual ~GPS(); virtual int init(); @@ -112,6 +112,7 @@ private: struct vehicle_gps_position_s _report; ///< uORB topic for gps position orb_advert_t _report_pub; ///< uORB pub for gps position float _rate; ///< position update rate + bool _fake_gps; ///< fake gps output /** @@ -156,7 +157,7 @@ GPS *g_dev; } -GPS::GPS(const char *uart_path) : +GPS::GPS(const char *uart_path, bool fake_gps) : CDev("gps", GPS_DEVICE_PATH), _task_should_exit(false), _healthy(false), @@ -164,7 +165,8 @@ GPS::GPS(const char *uart_path) : _mode(GPS_DRIVER_MODE_UBX), _Helper(nullptr), _report_pub(-1), - _rate(0.0f) + _rate(0.0f), + _fake_gps(fake_gps) { /* store port name */ strncpy(_port, uart_path, sizeof(_port)); @@ -264,98 +266,133 @@ GPS::task_main() /* loop handling received serial bytes and also configuring in between */ while (!_task_should_exit) { - if (_Helper != nullptr) { - delete(_Helper); - /* set to zero to ensure parser is not used while not instantiated */ - _Helper = nullptr; - } + if (_fake_gps) { + + _report.timestamp_position = hrt_absolute_time(); + _report.lat = (int32_t)47.378301e7f; + _report.lon = (int32_t)8.538777e7f; + _report.alt = (int32_t)400e3f; + _report.timestamp_variance = hrt_absolute_time(); + _report.s_variance_m_s = 10.0f; + _report.p_variance_m = 10.0f; + _report.c_variance_rad = 0.1f; + _report.fix_type = 3; + _report.eph_m = 10.0f; + _report.epv_m = 10.0f; + _report.timestamp_velocity = hrt_absolute_time(); + _report.vel_n_m_s = 0.0f; + _report.vel_e_m_s = 0.0f; + _report.vel_d_m_s = 0.0f; + _report.vel_m_s = sqrtf(_report.vel_n_m_s * _report.vel_n_m_s + _report.vel_e_m_s * _report.vel_e_m_s + _report.vel_d_m_s * _report.vel_d_m_s); + _report.cog_rad = 0.0f; + _report.vel_ned_valid = true; + + //no time and satellite information simulated + + if (_report_pub > 0) { + orb_publish(ORB_ID(vehicle_gps_position), _report_pub, &_report); + + } else { + _report_pub = orb_advertise(ORB_ID(vehicle_gps_position), &_report); + } - switch (_mode) { - case GPS_DRIVER_MODE_UBX: - _Helper = new UBX(_serial_fd, &_report); - break; + usleep(2e5); - case GPS_DRIVER_MODE_MTK: - _Helper = new MTK(_serial_fd, &_report); - break; + } else { - default: - break; - } + if (_Helper != nullptr) { + delete(_Helper); + /* set to zero to ensure parser is not used while not instantiated */ + _Helper = nullptr; + } - unlock(); + switch (_mode) { + case GPS_DRIVER_MODE_UBX: + _Helper = new UBX(_serial_fd, &_report); + break; + + case GPS_DRIVER_MODE_MTK: + _Helper = new MTK(_serial_fd, &_report); + break; + + default: + break; + } - if (_Helper->configure(_baudrate) == 0) { unlock(); - // GPS is obviously detected successfully, reset statistics - _Helper->reset_update_rates(); + if (_Helper->configure(_baudrate) == 0) { + unlock(); - while (_Helper->receive(TIMEOUT_5HZ) > 0 && !_task_should_exit) { -// lock(); - /* opportunistic publishing - else invalid data would end up on the bus */ - if (_report_pub > 0) { - orb_publish(ORB_ID(vehicle_gps_position), _report_pub, &_report); + // GPS is obviously detected successfully, reset statistics + _Helper->reset_update_rates(); - } else { - _report_pub = orb_advertise(ORB_ID(vehicle_gps_position), &_report); - } + while (_Helper->receive(TIMEOUT_5HZ) > 0 && !_task_should_exit) { + // lock(); + /* opportunistic publishing - else invalid data would end up on the bus */ + if (_report_pub > 0) { + orb_publish(ORB_ID(vehicle_gps_position), _report_pub, &_report); + + } else { + _report_pub = orb_advertise(ORB_ID(vehicle_gps_position), &_report); + } - last_rate_count++; + last_rate_count++; - /* measure update rate every 5 seconds */ - if (hrt_absolute_time() - last_rate_measurement > RATE_MEASUREMENT_PERIOD) { - _rate = last_rate_count / ((float)((hrt_absolute_time() - last_rate_measurement)) / 1000000.0f); - last_rate_measurement = hrt_absolute_time(); - last_rate_count = 0; - _Helper->store_update_rates(); - _Helper->reset_update_rates(); - } + /* measure update rate every 5 seconds */ + if (hrt_absolute_time() - last_rate_measurement > RATE_MEASUREMENT_PERIOD) { + _rate = last_rate_count / ((float)((hrt_absolute_time() - last_rate_measurement)) / 1000000.0f); + last_rate_measurement = hrt_absolute_time(); + last_rate_count = 0; + _Helper->store_update_rates(); + _Helper->reset_update_rates(); + } - if (!_healthy) { - char *mode_str = "unknown"; + if (!_healthy) { + char *mode_str = "unknown"; - switch (_mode) { - case GPS_DRIVER_MODE_UBX: - mode_str = "UBX"; - break; + switch (_mode) { + case GPS_DRIVER_MODE_UBX: + mode_str = "UBX"; + break; - case GPS_DRIVER_MODE_MTK: - mode_str = "MTK"; - break; + case GPS_DRIVER_MODE_MTK: + mode_str = "MTK"; + break; - default: - break; + default: + break; + } + + warnx("module found: %s", mode_str); + _healthy = true; } + } - warnx("module found: %s", mode_str); - _healthy = true; + if (_healthy) { + warnx("module lost"); + _healthy = false; + _rate = 0.0f; } - } - if (_healthy) { - warnx("module lost"); - _healthy = false; - _rate = 0.0f; + lock(); } lock(); - } - - lock(); - /* select next mode */ - switch (_mode) { - case GPS_DRIVER_MODE_UBX: - _mode = GPS_DRIVER_MODE_MTK; - break; + /* select next mode */ + switch (_mode) { + case GPS_DRIVER_MODE_UBX: + _mode = GPS_DRIVER_MODE_MTK; + break; - case GPS_DRIVER_MODE_MTK: - _mode = GPS_DRIVER_MODE_UBX; - break; + case GPS_DRIVER_MODE_MTK: + _mode = GPS_DRIVER_MODE_UBX; + break; - default: - break; + default: + break; + } } } @@ -417,7 +454,7 @@ namespace gps GPS *g_dev; -void start(const char *uart_path); +void start(const char *uart_path, bool fake_gps); void stop(); void test(); void reset(); @@ -427,7 +464,7 @@ void info(); * Start the driver. */ void -start(const char *uart_path) +start(const char *uart_path, bool fake_gps) { int fd; @@ -435,7 +472,7 @@ start(const char *uart_path) errx(1, "already started"); /* create the driver */ - g_dev = new GPS(uart_path); + g_dev = new GPS(uart_path, fake_gps); if (g_dev == nullptr) goto fail; @@ -527,6 +564,7 @@ gps_main(int argc, char *argv[]) /* set to default */ char *device_name = GPS_DEFAULT_UART_PORT; + bool fake_gps = false; /* * Start/load the driver. @@ -542,7 +580,13 @@ gps_main(int argc, char *argv[]) } } - gps::start(device_name); + /* Detect fake gps option */ + for (int i = 2; i < argc; i++) { + if (!strcmp(argv[i], "-f")) + fake_gps = true; + } + + gps::start(device_name, fake_gps); } if (!strcmp(argv[1], "stop")) @@ -567,5 +611,5 @@ gps_main(int argc, char *argv[]) gps::info(); out: - errx(1, "unrecognized command, try 'start', 'stop', 'test', 'reset' or 'status' [-d /dev/ttyS0-n]"); + errx(1, "unrecognized command, try 'start', 'stop', 'test', 'reset' or 'status' [-d /dev/ttyS0-n][-f]"); } diff --git a/src/drivers/hil/hil.cpp b/src/drivers/hil/hil.cpp index c1d73dd87..0a047f38f 100644 --- a/src/drivers/hil/hil.cpp +++ b/src/drivers/hil/hil.cpp @@ -1,6 +1,6 @@ /**************************************************************************** * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -193,9 +193,10 @@ HIL::~HIL() } while (_task != -1); } - /* clean up the alternate device node */ - if (_primary_pwm_device) - unregister_driver(PWM_OUTPUT_DEVICE_PATH); + // XXX already claimed with CDEV + // /* clean up the alternate device node */ + // if (_primary_pwm_device) + // unregister_driver(PWM_OUTPUT_DEVICE_PATH); g_hil = nullptr; } diff --git a/src/drivers/hott/hott_sensors/hott_sensors.cpp b/src/drivers/hott/hott_sensors/hott_sensors.cpp index e322c6349..a3d3a3933 100644 --- a/src/drivers/hott/hott_sensors/hott_sensors.cpp +++ b/src/drivers/hott/hott_sensors/hott_sensors.cpp @@ -211,7 +211,7 @@ hott_sensors_main(int argc, char *argv[]) thread_should_exit = false; deamon_task = task_spawn_cmd(daemon_name, SCHED_DEFAULT, - SCHED_PRIORITY_MAX - 40, + SCHED_PRIORITY_DEFAULT, 1024, hott_sensors_thread_main, (argv) ? (const char **)&argv[2] : (const char **)NULL); diff --git a/src/drivers/hott/hott_telemetry/hott_telemetry.cpp b/src/drivers/hott/hott_telemetry/hott_telemetry.cpp index 042d9f816..d293f9954 100644 --- a/src/drivers/hott/hott_telemetry/hott_telemetry.cpp +++ b/src/drivers/hott/hott_telemetry/hott_telemetry.cpp @@ -237,7 +237,7 @@ hott_telemetry_main(int argc, char *argv[]) thread_should_exit = false; deamon_task = task_spawn_cmd(daemon_name, SCHED_DEFAULT, - SCHED_PRIORITY_MAX - 40, + SCHED_PRIORITY_DEFAULT, 2048, hott_telemetry_thread_main, (argv) ? (const char **)&argv[2] : (const char **)NULL); diff --git a/src/drivers/meas_airspeed/meas_airspeed.cpp b/src/drivers/meas_airspeed/meas_airspeed.cpp index 3cd6d6720..a95c4576b 100644 --- a/src/drivers/meas_airspeed/meas_airspeed.cpp +++ b/src/drivers/meas_airspeed/meas_airspeed.cpp @@ -198,7 +198,9 @@ MEASAirspeed::collect() // uint16_t diff_press_pa = abs(dp_raw - (16384 / 2.0f)); const float P_min = -1.0f; const float P_max = 1.0f; - float diff_press_pa = math::max(0.0f, fabsf( ( ((float)dp_raw - 0.1f*16383.0f) * (P_max-P_min)/(0.8f*16383.0f) + P_min) * 6894.8f) - _diff_pres_offset); + float diff_press_pa = fabsf( ( ((float)dp_raw - 0.1f*16383.0f) * (P_max-P_min)/(0.8f*16383.0f) + P_min) * 6894.8f) - _diff_pres_offset; + if (diff_press_pa < 0.0f) + diff_press_pa = 0.0f; struct differential_pressure_s report; diff --git a/src/drivers/ms5611/ms5611.cpp b/src/drivers/ms5611/ms5611.cpp index 87788824a..6326cf7fc 100644 --- a/src/drivers/ms5611/ms5611.cpp +++ b/src/drivers/ms5611/ms5611.cpp @@ -124,6 +124,8 @@ protected: int32_t _TEMP; int64_t _OFF; int64_t _SENS; + float _P; + float _T; /* altitude conversion calibration */ unsigned _msl_pressure; /* in kPa */ @@ -623,6 +625,8 @@ MS5611::collect() /* pressure calculation, result in Pa */ int32_t P = (((raw * _SENS) >> 21) - _OFF) >> 15; + _P = P * 0.01f; + _T = _TEMP * 0.01f; /* generate a new report */ report.temperature = _TEMP / 100.0f; @@ -695,6 +699,8 @@ MS5611::print_info() printf("TEMP: %d\n", _TEMP); printf("SENS: %lld\n", _SENS); printf("OFF: %lld\n", _OFF); + printf("P: %.3f\n", _P); + printf("T: %.3f\n", _T); printf("MSL pressure: %10.4f\n", (double)(_msl_pressure / 100.f)); printf("factory_setup %u\n", _prom.factory_setup); diff --git a/src/drivers/px4fmu/fmu.cpp b/src/drivers/px4fmu/fmu.cpp index b878d29bc..4b1b0ed0b 100644 --- a/src/drivers/px4fmu/fmu.cpp +++ b/src/drivers/px4fmu/fmu.cpp @@ -65,6 +65,7 @@ #include <systemlib/err.h> #include <systemlib/mixer/mixer.h> #include <systemlib/pwm_limit/pwm_limit.h> +#include <systemlib/board_serial.h> #include <drivers/drv_mixer.h> #include <drivers/drv_rc_input.h> @@ -224,10 +225,10 @@ PX4FMU::PX4FMU() : _armed(false), _pwm_on(false), _mixers(nullptr), - _failsafe_pwm( {0}), - _disarmed_pwm( {0}), - _num_failsafe_set(0), - _num_disarmed_set(0) + _failsafe_pwm({0}), + _disarmed_pwm({0}), + _num_failsafe_set(0), + _num_disarmed_set(0) { for (unsigned i = 0; i < _max_actuators; i++) { _min_pwm[i] = PWM_DEFAULT_MIN; @@ -575,7 +576,7 @@ PX4FMU::task_main() if (i >= outputs.noutputs || !isfinite(outputs.output[i]) || outputs.output[i] < -1.0f || - outputs.output[i] > 1.0f) { + outputs.output[i] > 1.0f) { /* * Value is NaN, INF or out of band - set to the minimum value. * This will be clearly visible on the servo status and will limit the risk of accidentally @@ -933,7 +934,7 @@ PX4FMU::pwm_ioctl(file *filp, int cmd, unsigned long arg) break; } - /* FALLTHROUGH */ + /* FALLTHROUGH */ case PWM_SERVO_SET(3): case PWM_SERVO_SET(2): if (_mode < MODE_4PWM) { @@ -941,7 +942,7 @@ PX4FMU::pwm_ioctl(file *filp, int cmd, unsigned long arg) break; } - /* FALLTHROUGH */ + /* FALLTHROUGH */ case PWM_SERVO_SET(1): case PWM_SERVO_SET(0): if (arg <= 2100) { @@ -960,7 +961,7 @@ PX4FMU::pwm_ioctl(file *filp, int cmd, unsigned long arg) break; } - /* FALLTHROUGH */ + /* FALLTHROUGH */ case PWM_SERVO_GET(3): case PWM_SERVO_GET(2): if (_mode < MODE_4PWM) { @@ -968,7 +969,7 @@ PX4FMU::pwm_ioctl(file *filp, int cmd, unsigned long arg) break; } - /* FALLTHROUGH */ + /* FALLTHROUGH */ case PWM_SERVO_GET(1): case PWM_SERVO_GET(0): *(servo_position_t *)arg = up_pwm_servo_get(cmd - PWM_SERVO_GET(0)); @@ -1107,10 +1108,12 @@ PX4FMU::sensor_reset(int ms) stm32_configgpio(GPIO_SPI_CS_GYRO_OFF); stm32_configgpio(GPIO_SPI_CS_ACCEL_MAG_OFF); stm32_configgpio(GPIO_SPI_CS_BARO_OFF); + stm32_configgpio(GPIO_SPI_CS_MPU_OFF); stm32_gpiowrite(GPIO_SPI_CS_GYRO_OFF, 0); stm32_gpiowrite(GPIO_SPI_CS_ACCEL_MAG_OFF, 0); stm32_gpiowrite(GPIO_SPI_CS_BARO_OFF, 0); + stm32_gpiowrite(GPIO_SPI_CS_MPU_OFF, 0); stm32_configgpio(GPIO_SPI1_SCK_OFF); stm32_configgpio(GPIO_SPI1_MISO_OFF); @@ -1123,10 +1126,12 @@ PX4FMU::sensor_reset(int ms) stm32_configgpio(GPIO_GYRO_DRDY_OFF); stm32_configgpio(GPIO_MAG_DRDY_OFF); stm32_configgpio(GPIO_ACCEL_DRDY_OFF); + stm32_configgpio(GPIO_EXTI_MPU_DRDY_OFF); stm32_gpiowrite(GPIO_GYRO_DRDY_OFF, 0); stm32_gpiowrite(GPIO_MAG_DRDY_OFF, 0); stm32_gpiowrite(GPIO_ACCEL_DRDY_OFF, 0); + stm32_gpiowrite(GPIO_EXTI_MPU_DRDY_OFF, 0); /* set the sensor rail off */ stm32_configgpio(GPIO_VDD_3V3_SENSORS_EN); @@ -1159,6 +1164,13 @@ PX4FMU::sensor_reset(int ms) stm32_gpiowrite(GPIO_SPI_CS_ACCEL_MAG, 1); stm32_gpiowrite(GPIO_SPI_CS_BARO, 1); stm32_gpiowrite(GPIO_SPI_CS_MPU, 1); + + // // XXX bring up the EXTI pins again + // stm32_configgpio(GPIO_GYRO_DRDY); + // stm32_configgpio(GPIO_MAG_DRDY); + // stm32_configgpio(GPIO_ACCEL_DRDY); + // stm32_configgpio(GPIO_EXTI_MPU_DRDY); + #endif #endif } @@ -1591,6 +1603,15 @@ fmu_main(int argc, char *argv[]) errx(0, "FMU driver stopped"); } + if (!strcmp(verb, "id")) { + char id[12]; + (void)get_board_serial(id); + + errx(0, "Board serial:\n %02X%02X%02X%02X %02X%02X%02X%02X %02X%02X%02X%02X", + (unsigned)id[0], (unsigned)id[1], (unsigned)id[2], (unsigned)id[3], (unsigned)id[4], (unsigned)id[5], + (unsigned)id[6], (unsigned)id[7], (unsigned)id[8], (unsigned)id[9], (unsigned)id[10], (unsigned)id[11]); + } + if (fmu_start() != OK) errx(1, "failed to start the FMU driver"); @@ -1647,6 +1668,7 @@ fmu_main(int argc, char *argv[]) sensor_reset(0); warnx("resettet default time"); } + exit(0); } diff --git a/src/drivers/px4io/px4io.cpp b/src/drivers/px4io/px4io.cpp index cbdd5acc4..0ca35d2f2 100644 --- a/src/drivers/px4io/px4io.cpp +++ b/src/drivers/px4io/px4io.cpp @@ -1,6 +1,6 @@ /**************************************************************************** * - * Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. + * Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -35,7 +35,7 @@ * @file px4io.cpp * Driver for the PX4IO board. * - * PX4IO is connected via I2C. + * PX4IO is connected via I2C or DMA enabled high-speed UART. */ #include <nuttx/config.h> @@ -1690,6 +1690,9 @@ PX4IO::mixer_send(const char *buf, unsigned buflen, unsigned retries) int ret = io_reg_set(PX4IO_PAGE_MIXERLOAD, 0, (uint16_t *)frame, (sizeof(px4io_mixdata) + 2) / 2); + if (ret) + return ret; + retries--; log("mixer sent"); @@ -2420,6 +2423,69 @@ detect(int argc, char *argv[]) } void +checkcrc(int argc, char *argv[]) +{ + bool keep_running = false; + + if (g_dev == nullptr) { + /* allocate the interface */ + device::Device *interface = get_interface(); + + /* create the driver - it will set g_dev */ + (void)new PX4IO(interface); + + if (g_dev == nullptr) + errx(1, "driver alloc failed"); + } else { + /* its already running, don't kill the driver */ + keep_running = true; + } + + /* + check IO CRC against CRC of a file + */ + if (argc < 2) { + printf("usage: px4io checkcrc filename\n"); + exit(1); + } + int fd = open(argv[1], O_RDONLY); + if (fd == -1) { + printf("open of %s failed - %d\n", argv[1], errno); + exit(1); + } + const uint32_t app_size_max = 0xf000; + uint32_t fw_crc = 0; + uint32_t nbytes = 0; + while (true) { + uint8_t buf[16]; + int n = read(fd, buf, sizeof(buf)); + if (n <= 0) break; + fw_crc = crc32part(buf, n, fw_crc); + nbytes += n; + } + close(fd); + while (nbytes < app_size_max) { + uint8_t b = 0xff; + fw_crc = crc32part(&b, 1, fw_crc); + nbytes++; + } + + int ret = g_dev->ioctl(nullptr, PX4IO_CHECK_CRC, fw_crc); + + if (!keep_running) { + delete g_dev; + g_dev = nullptr; + } + + if (ret != OK) { + printf("check CRC failed - %d\n", ret); + exit(1); + } + printf("CRCs match\n"); + exit(0); +} + +void bind(int argc, char *argv[]) { int pulses; @@ -2613,6 +2679,9 @@ px4io_main(int argc, char *argv[]) if (!strcmp(argv[1], "detect")) detect(argc - 1, argv + 1); + if (!strcmp(argv[1], "checkcrc")) + checkcrc(argc - 1, argv + 1); + if (!strcmp(argv[1], "update")) { if (g_dev != nullptr) { @@ -2798,49 +2867,6 @@ px4io_main(int argc, char *argv[]) exit(0); } - if (!strcmp(argv[1], "checkcrc")) { - /* - check IO CRC against CRC of a file - */ - if (argc <= 2) { - printf("usage: px4io checkcrc filename\n"); - exit(1); - } - if (g_dev == nullptr) { - printf("px4io is not started\n"); - exit(1); - } - int fd = open(argv[2], O_RDONLY); - if (fd == -1) { - printf("open of %s failed - %d\n", argv[2], errno); - exit(1); - } - const uint32_t app_size_max = 0xf000; - uint32_t fw_crc = 0; - uint32_t nbytes = 0; - while (true) { - uint8_t buf[16]; - int n = read(fd, buf, sizeof(buf)); - if (n <= 0) break; - fw_crc = crc32part(buf, n, fw_crc); - nbytes += n; - } - close(fd); - while (nbytes < app_size_max) { - uint8_t b = 0xff; - fw_crc = crc32part(&b, 1, fw_crc); - nbytes++; - } - - int ret = g_dev->ioctl(nullptr, PX4IO_CHECK_CRC, fw_crc); - if (ret != OK) { - printf("check CRC failed - %d\n", ret); - exit(1); - } - printf("CRCs match\n"); - exit(0); - } - if (!strcmp(argv[1], "rx_dsm") || !strcmp(argv[1], "rx_dsm_10bit") || !strcmp(argv[1], "rx_dsm_11bit") || diff --git a/src/drivers/rgbled/rgbled.cpp b/src/drivers/rgbled/rgbled.cpp index 727c86e02..4f58891ed 100644 --- a/src/drivers/rgbled/rgbled.cpp +++ b/src/drivers/rgbled/rgbled.cpp @@ -559,7 +559,7 @@ RGBLED::get(bool &on, bool &powersave, uint8_t &r, uint8_t &g, uint8_t &b) void rgbled_usage() { - warnx("missing command: try 'start', 'test', 'info', 'off', 'rgb 30 40 50'"); + warnx("missing command: try 'start', 'test', 'info', 'off', 'stop', 'rgb 30 40 50'"); warnx("options:"); warnx(" -b i2cbus (%d)", PX4_I2C_BUS_LED); warnx(" -a addr (0x%x)", ADDR); @@ -643,7 +643,7 @@ rgbled_main(int argc, char *argv[]) if (g_rgbled == nullptr) { warnx("not started"); rgbled_usage(); - exit(0); + exit(1); } if (!strcmp(verb, "test")) { @@ -669,7 +669,7 @@ rgbled_main(int argc, char *argv[]) exit(0); } - if (!strcmp(verb, "off")) { + if (!strcmp(verb, "off") || !strcmp(verb, "stop")) { fd = open(RGBLED_DEVICE_PATH, 0); if (fd == -1) { @@ -681,6 +681,12 @@ rgbled_main(int argc, char *argv[]) exit(ret); } + if (!strcmp(verb, "stop")) { + delete g_rgbled; + g_rgbled = nullptr; + exit(0); + } + if (!strcmp(verb, "rgb")) { if (argc < 5) { errx(1, "Usage: rgbled rgb <red> <green> <blue>"); diff --git a/src/lib/external_lgpl/tecs/tecs.cpp b/src/lib/external_lgpl/tecs/tecs.cpp index a733ef1d2..1d5c85699 100644 --- a/src/lib/external_lgpl/tecs/tecs.cpp +++ b/src/lib/external_lgpl/tecs/tecs.cpp @@ -404,10 +404,18 @@ void TECS::_update_pitch(void) // Apply max and min values for integrator state that will allow for no more than // 5deg of saturation. This allows for some pitch variation due to gusts before the // integrator is clipped. Otherwise the effectiveness of the integrator will be reduced in turbulence + // During climbout/takeoff, bias the demanded pitch angle so that zero speed error produces a pitch angle + // demand equal to the minimum value (which is )set by the mission plan during this mode). Otherwise the + // integrator has to catch up before the nose can be raised to reduce speed during climbout. float gainInv = (_integ5_state * _timeConst * CONSTANTS_ONE_G); float temp = SEB_error + SEBdot_error * _ptchDamp + SEBdot_dem * _timeConst; + if (_climbOutDem) + { + temp += _PITCHminf * gainInv; + } _integ7_state = constrain(_integ7_state, (gainInv * (_PITCHminf - 0.0783f)) - temp, (gainInv * (_PITCHmaxf + 0.0783f)) - temp); + // Calculate pitch demand from specific energy balance signals _pitch_dem_unc = (temp + _integ7_state) / gainInv; diff --git a/src/modules/commander/commander.cpp b/src/modules/commander/commander.cpp index 0357542f0..add7312de 100644 --- a/src/modules/commander/commander.cpp +++ b/src/modules/commander/commander.cpp @@ -107,14 +107,9 @@ static const int ERROR = -1; extern struct system_load_s system_load; -#define LOW_VOLTAGE_BATTERY_HYSTERESIS_TIME_MS 1000.0f -#define CRITICAL_VOLTAGE_BATTERY_HYSTERESIS_TIME_MS 100.0f - /* Decouple update interval and hysteris counters, all depends on intervals */ #define COMMANDER_MONITORING_INTERVAL 50000 #define COMMANDER_MONITORING_LOOPSPERMSEC (1/(COMMANDER_MONITORING_INTERVAL/1000.0f)) -#define LOW_VOLTAGE_BATTERY_COUNTER_LIMIT (LOW_VOLTAGE_BATTERY_HYSTERESIS_TIME_MS*COMMANDER_MONITORING_LOOPSPERMSEC) -#define CRITICAL_VOLTAGE_BATTERY_COUNTER_LIMIT (CRITICAL_VOLTAGE_BATTERY_HYSTERESIS_TIME_MS*COMMANDER_MONITORING_LOOPSPERMSEC) #define MAVLINK_OPEN_INTERVAL 50000 @@ -666,8 +661,6 @@ int commander_thread_main(int argc, char *argv[]) /* Start monitoring loop */ unsigned counter = 0; - unsigned low_voltage_counter = 0; - unsigned critical_voltage_counter = 0; unsigned stick_off_counter = 0; unsigned stick_on_counter = 0; @@ -745,7 +738,6 @@ int commander_thread_main(int argc, char *argv[]) int battery_sub = orb_subscribe(ORB_ID(battery_status)); struct battery_status_s battery; memset(&battery, 0, sizeof(battery)); - battery.voltage_v = 0.0f; /* Subscribe to subsystem info topic */ int subsys_sub = orb_subscribe(ORB_ID(subsystem_info)); @@ -890,14 +882,12 @@ int commander_thread_main(int argc, char *argv[]) if (updated) { orb_copy(ORB_ID(battery_status), battery_sub, &battery); - - // warnx("bat v: %2.2f", battery.voltage_v); - - /* only consider battery voltage if system has been running 2s and battery voltage is higher than 4V */ - if (hrt_absolute_time() > start_time + 2000000 && battery.voltage_v > 4.0f) { - status.battery_voltage = battery.voltage_v; + /* only consider battery voltage if system has been running 2s and battery voltage is valid */ + if (hrt_absolute_time() > start_time + 2000000 && battery.voltage_filtered_v > 0.0f) { + status.battery_voltage = battery.voltage_filtered_v; + status.battery_current = battery.current_a; status.condition_battery_voltage_valid = true; - status.battery_remaining = battery_remaining_estimate_voltage(status.battery_voltage); + status.battery_remaining = battery_remaining_estimate_voltage(battery.voltage_filtered_v, battery.discharged_mah); } } @@ -950,46 +940,29 @@ int commander_thread_main(int argc, char *argv[]) //on_usb_power = (stat("/dev/ttyACM0", &statbuf) == 0); } - // XXX remove later - //warnx("bat remaining: %2.2f", status.battery_remaining); - /* if battery voltage is getting lower, warn using buzzer, etc. */ if (status.condition_battery_voltage_valid && status.battery_remaining < 0.25f && !low_battery_voltage_actions_done) { - //TODO: add filter, or call emergency after n measurements < VOLTAGE_BATTERY_MINIMAL_MILLIVOLTS - if (low_voltage_counter > LOW_VOLTAGE_BATTERY_COUNTER_LIMIT) { - low_battery_voltage_actions_done = true; - mavlink_log_critical(mavlink_fd, "#audio: WARNING: LOW BATTERY"); - status.battery_warning = VEHICLE_BATTERY_WARNING_LOW; - status_changed = true; - battery_tune_played = false; - } - - low_voltage_counter++; + low_battery_voltage_actions_done = true; + mavlink_log_critical(mavlink_fd, "#audio: WARNING: LOW BATTERY"); + status.battery_warning = VEHICLE_BATTERY_WARNING_LOW; + status_changed = true; + battery_tune_played = false; } else if (status.condition_battery_voltage_valid && status.battery_remaining < 0.1f && !critical_battery_voltage_actions_done && low_battery_voltage_actions_done) { /* critical battery voltage, this is rather an emergency, change state machine */ - if (critical_voltage_counter > CRITICAL_VOLTAGE_BATTERY_COUNTER_LIMIT) { - critical_battery_voltage_actions_done = true; - mavlink_log_critical(mavlink_fd, "#audio: EMERGENCY: CRITICAL BATTERY"); - status.battery_warning = VEHICLE_BATTERY_WARNING_CRITICAL; - battery_tune_played = false; - - if (armed.armed) { - arming_state_transition(&status, &safety, &control_mode, ARMING_STATE_ARMED_ERROR, &armed); + critical_battery_voltage_actions_done = true; + mavlink_log_critical(mavlink_fd, "#audio: EMERGENCY: CRITICAL BATTERY"); + status.battery_warning = VEHICLE_BATTERY_WARNING_CRITICAL; + battery_tune_played = false; - } else { - arming_state_transition(&status, &safety, &control_mode, ARMING_STATE_STANDBY_ERROR, &armed); - } + if (armed.armed) { + arming_state_transition(&status, &safety, &control_mode, ARMING_STATE_ARMED_ERROR, &armed); - status_changed = true; + } else { + arming_state_transition(&status, &safety, &control_mode, ARMING_STATE_STANDBY_ERROR, &armed); } - critical_voltage_counter++; - - } else { - - low_voltage_counter = 0; - critical_voltage_counter = 0; + status_changed = true; } /* End battery voltage check */ diff --git a/src/modules/commander/commander_helper.cpp b/src/modules/commander/commander_helper.cpp index 565b4b66a..21a1c4c2c 100644 --- a/src/modules/commander/commander_helper.cpp +++ b/src/modules/commander/commander_helper.cpp @@ -44,6 +44,7 @@ #include <stdint.h> #include <stdbool.h> #include <fcntl.h> +#include <math.h> #include <uORB/uORB.h> #include <uORB/topics/vehicle_status.h> @@ -251,36 +252,47 @@ void rgbled_set_pattern(rgbled_pattern_t *pattern) ioctl(rgbleds, RGBLED_SET_PATTERN, (unsigned long)pattern); } -float battery_remaining_estimate_voltage(float voltage) +float battery_remaining_estimate_voltage(float voltage, float discharged) { float ret = 0; - static param_t bat_volt_empty; - static param_t bat_volt_full; - static param_t bat_n_cells; + static param_t bat_v_empty_h; + static param_t bat_v_full_h; + static param_t bat_n_cells_h; + static param_t bat_capacity_h; + static float bat_v_empty = 3.2f; + static float bat_v_full = 4.0f; + static int bat_n_cells = 3; + static float bat_capacity = -1.0f; static bool initialized = false; static unsigned int counter = 0; - static float ncells = 3; - // XXX change cells to int (and param to INT32) if (!initialized) { - bat_volt_empty = param_find("BAT_V_EMPTY"); - bat_volt_full = param_find("BAT_V_FULL"); - bat_n_cells = param_find("BAT_N_CELLS"); + bat_v_empty_h = param_find("BAT_V_EMPTY"); + bat_v_full_h = param_find("BAT_V_FULL"); + bat_n_cells_h = param_find("BAT_N_CELLS"); + bat_capacity_h = param_find("BAT_CAPACITY"); initialized = true; } - static float chemistry_voltage_empty = 3.2f; - static float chemistry_voltage_full = 4.05f; - if (counter % 100 == 0) { - param_get(bat_volt_empty, &chemistry_voltage_empty); - param_get(bat_volt_full, &chemistry_voltage_full); - param_get(bat_n_cells, &ncells); + param_get(bat_v_empty_h, &bat_v_empty); + param_get(bat_v_full_h, &bat_v_full); + param_get(bat_n_cells_h, &bat_n_cells); + param_get(bat_capacity_h, &bat_capacity); } counter++; - ret = (voltage - ncells * chemistry_voltage_empty) / (ncells * (chemistry_voltage_full - chemistry_voltage_empty)); + /* remaining charge estimate based on voltage */ + float remaining_voltage = (voltage - bat_n_cells * bat_v_empty) / (bat_n_cells * (bat_v_full - bat_v_empty)); + + if (bat_capacity > 0.0f) { + /* if battery capacity is known, use discharged current for estimate, but don't show more than voltage estimate */ + ret = fminf(remaining_voltage, 1.0f - discharged / bat_capacity); + } else { + /* else use voltage */ + ret = remaining_voltage; + } /* limit to sane values */ ret = (ret < 0.0f) ? 0.0f : ret; diff --git a/src/modules/commander/commander_helper.h b/src/modules/commander/commander_helper.h index e9514446c..d0393f45a 100644 --- a/src/modules/commander/commander_helper.h +++ b/src/modules/commander/commander_helper.h @@ -75,12 +75,13 @@ void rgbled_set_mode(rgbled_mode_t mode); void rgbled_set_pattern(rgbled_pattern_t *pattern); /** - * Provides a coarse estimate of remaining battery power. + * Estimate remaining battery charge. * - * The estimate is very basic and based on decharging voltage curves. + * Use integral of current if battery capacity known (BAT_CAPACITY parameter set), + * else use simple estimate based on voltage. * * @return the estimated remaining capacity in 0..1 */ -float battery_remaining_estimate_voltage(float voltage); +float battery_remaining_estimate_voltage(float voltage, float discharged); #endif /* COMMANDER_HELPER_H_ */ diff --git a/src/modules/commander/commander_params.c b/src/modules/commander/commander_params.c index 40d0386d5..e10b7f18d 100644 --- a/src/modules/commander/commander_params.c +++ b/src/modules/commander/commander_params.c @@ -50,6 +50,7 @@ PARAM_DEFINE_FLOAT(NAV_TAKEOFF_GAP, 3.0f); PARAM_DEFINE_FLOAT(TRIM_ROLL, 0.0f); PARAM_DEFINE_FLOAT(TRIM_PITCH, 0.0f); PARAM_DEFINE_FLOAT(TRIM_YAW, 0.0f); -PARAM_DEFINE_FLOAT(BAT_V_EMPTY, 3.2f); -PARAM_DEFINE_FLOAT(BAT_V_FULL, 4.05f); -PARAM_DEFINE_FLOAT(BAT_N_CELLS, 3); +PARAM_DEFINE_FLOAT(BAT_V_EMPTY, 3.4f); +PARAM_DEFINE_FLOAT(BAT_V_FULL, 3.9f); +PARAM_DEFINE_INT32(BAT_N_CELLS, 3); +PARAM_DEFINE_FLOAT(BAT_CAPACITY, -1.0f); diff --git a/src/modules/fw_pos_control_l1/fw_pos_control_l1_params.c b/src/modules/fw_pos_control_l1/fw_pos_control_l1_params.c index 3bb872405..31a9cdefa 100644 --- a/src/modules/fw_pos_control_l1/fw_pos_control_l1_params.c +++ b/src/modules/fw_pos_control_l1/fw_pos_control_l1_params.c @@ -1,7 +1,6 @@ /**************************************************************************** * - * Copyright (c) 2013 PX4 Development Team. All rights reserved. - * Author: Lorenz Meier <lm@inf.ethz.ch> + * Copyright (c) 2013, 2014 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -49,21 +48,75 @@ * */ +/** + * L1 period + * + * This is the L1 distance and defines the tracking + * point ahead of the aircraft its following. + * A value of 25 meters works for most aircraft. Shorten + * slowly during tuning until response is sharp without oscillation. + * + * @min 1.0 + * @max 100.0 + * @group L1 Control + */ PARAM_DEFINE_FLOAT(FW_L1_PERIOD, 25.0f); - +/** + * L1 damping + * + * Damping factor for L1 control. + * + * @min 0.6 + * @max 0.9 + * @group L1 Control + */ PARAM_DEFINE_FLOAT(FW_L1_DAMPING, 0.75f); - +/** + * Default Loiter Radius + * + * This radius is used when no other loiter radius is set. + * + * @min 10.0 + * @max 100.0 + * @group L1 Control + */ PARAM_DEFINE_FLOAT(FW_LOITER_R, 50.0f); - +/** + * Cruise throttle + * + * This is the throttle setting required to achieve the desired cruise speed. Most airframes have a value of 0.5-0.7. + * + * @min 0.0 + * @max 1.0 + * @group L1 Control + */ PARAM_DEFINE_FLOAT(FW_THR_CRUISE, 0.7f); - +/** + * Negative pitch limit + * + * The minimum negative pitch the controller will output. + * + * @unit degrees + * @min -60.0 + * @max 0.0 + * @group L1 Control + */ PARAM_DEFINE_FLOAT(FW_P_LIM_MIN, -45.0f); - +/** + * Positive pitch limit + * + * The maximum positive pitch the controller will output. + * + * @unit degrees + * @min 0.0 + * @max 60.0 + * @group L1 Control + */ PARAM_DEFINE_FLOAT(FW_P_LIM_MAX, 45.0f); diff --git a/src/modules/mavlink/mavlink.c b/src/modules/mavlink/mavlink.c index 7c10e297b..20853379d 100644 --- a/src/modules/mavlink/mavlink.c +++ b/src/modules/mavlink/mavlink.c @@ -677,8 +677,8 @@ int mavlink_thread_main(int argc, char *argv[]) v_status.onboard_control_sensors_health, v_status.load * 1000.0f, v_status.battery_voltage * 1000.0f, - v_status.battery_current * 1000.0f, - v_status.battery_remaining, + v_status.battery_current * 100.0f, + v_status.battery_remaining * 100.0f, v_status.drop_rate_comm, v_status.errors_comm, v_status.errors_count1, diff --git a/src/modules/px4iofirmware/dsm.c b/src/modules/px4iofirmware/dsm.c index 4d306d6d0..60eda2319 100644 --- a/src/modules/px4iofirmware/dsm.c +++ b/src/modules/px4iofirmware/dsm.c @@ -203,6 +203,12 @@ dsm_guess_format(bool reset) int dsm_init(const char *device) { + +#ifdef CONFIG_ARCH_BOARD_PX4IO_V2 + // enable power on DSM connector + POWER_SPEKTRUM(true); +#endif + if (dsm_fd < 0) dsm_fd = open(device, O_RDONLY | O_NONBLOCK); diff --git a/src/modules/px4iofirmware/px4io.c b/src/modules/px4iofirmware/px4io.c index 745bd5705..0b8c4a6a8 100644 --- a/src/modules/px4iofirmware/px4io.c +++ b/src/modules/px4iofirmware/px4io.c @@ -125,6 +125,25 @@ heartbeat_blink(void) LED_BLUE(heartbeat = !heartbeat); } +static uint64_t reboot_time; + +/** + schedule a reboot in time_delta_usec microseconds + */ +void schedule_reboot(uint32_t time_delta_usec) +{ + reboot_time = hrt_absolute_time() + time_delta_usec; +} + +/** + check for a scheduled reboot + */ +static void check_reboot(void) +{ + if (reboot_time != 0 && hrt_absolute_time() > reboot_time) { + up_systemreset(); + } +} static void calculate_fw_crc(void) @@ -249,6 +268,8 @@ user_start(int argc, char *argv[]) heartbeat_blink(); } + check_reboot(); + #if 0 /* check for debug activity */ show_debug_messages(); diff --git a/src/modules/px4iofirmware/px4io.h b/src/modules/px4iofirmware/px4io.h index dea04a663..a0daa97ea 100644 --- a/src/modules/px4iofirmware/px4io.h +++ b/src/modules/px4iofirmware/px4io.h @@ -220,3 +220,7 @@ extern volatile uint8_t debug_level; /** send a debug message to the console */ extern void isr_debug(uint8_t level, const char *fmt, ...); + +/** schedule a reboot */ +extern void schedule_reboot(uint32_t time_delta_usec); + diff --git a/src/modules/px4iofirmware/registers.c b/src/modules/px4iofirmware/registers.c index 0358725db..ad4473073 100644 --- a/src/modules/px4iofirmware/registers.c +++ b/src/modules/px4iofirmware/registers.c @@ -518,16 +518,11 @@ registers_set_one(uint8_t page, uint8_t offset, uint16_t value) // check the magic value if (value != PX4IO_REBOOT_BL_MAGIC) break; - - // note that we don't set BL_WAIT_MAGIC in - // BKP_DR1 as that is not necessary given the - // timing of the forceupdate command. The - // bootloader on px4io waits for enough time - // anyway, and this method works with older - // bootloader versions (tested with both - // revision 3 and revision 4). - - up_systemreset(); + + // we schedule a reboot rather than rebooting + // immediately to allow the IO board to ACK + // the reboot command + schedule_reboot(100000); break; case PX4IO_P_SETUP_DSM: diff --git a/src/modules/sdlog2/sdlog2.c b/src/modules/sdlog2/sdlog2.c index e94b1e13c..06b1eddaa 100644 --- a/src/modules/sdlog2/sdlog2.c +++ b/src/modules/sdlog2/sdlog2.c @@ -1,6 +1,6 @@ /**************************************************************************** * - * Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. + * Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. * Author: Lorenz Meier <lm@inf.ethz.ch> * Anton Babushkin <anton.babushkin@me.com> * @@ -702,6 +702,7 @@ int sdlog2_thread_main(int argc, char *argv[]) struct airspeed_s airspeed; struct esc_status_s esc; struct vehicle_global_velocity_setpoint_s global_vel_sp; + struct battery_status_s battery; } buf; memset(&buf, 0, sizeof(buf)); @@ -726,6 +727,7 @@ int sdlog2_thread_main(int argc, char *argv[]) int airspeed_sub; int esc_sub; int global_vel_sp_sub; + int battery_sub; } subs; /* log message buffer: header + body */ @@ -752,6 +754,7 @@ int sdlog2_thread_main(int argc, char *argv[]) struct log_GPSP_s log_GPSP; struct log_ESC_s log_ESC; struct log_GVSP_s log_GVSP; + struct log_BATT_s log_BATT; } body; } log_msg = { LOG_PACKET_HEADER_INIT(0) @@ -760,9 +763,9 @@ int sdlog2_thread_main(int argc, char *argv[]) memset(&log_msg.body, 0, sizeof(log_msg.body)); /* --- IMPORTANT: DEFINE NUMBER OF ORB STRUCTS TO WAIT FOR HERE --- */ - /* number of subscriptions */ - const ssize_t fdsc = 19; - /* sanity check variable and index */ + /* number of messages */ + const ssize_t fdsc = 25; + /* Sanity check variable and index */ ssize_t fdsc_count = 0; /* file descriptors to wait for */ struct pollfd fds[fdsc]; @@ -881,6 +884,12 @@ int sdlog2_thread_main(int argc, char *argv[]) fds[fdsc_count].events = POLLIN; fdsc_count++; + /* --- BATTERY --- */ + subs.battery_sub = orb_subscribe(ORB_ID(battery_status)); + fds[fdsc_count].fd = subs.battery_sub; + fds[fdsc_count].events = POLLIN; + fdsc_count++; + /* WARNING: If you get the error message below, * then the number of registered messages (fdsc) * differs from the number of messages in the above list. @@ -971,8 +980,6 @@ int sdlog2_thread_main(int argc, char *argv[]) log_msg.body.log_STAT.main_state = (uint8_t) buf_status.main_state; log_msg.body.log_STAT.navigation_state = (uint8_t) buf_status.navigation_state; log_msg.body.log_STAT.arming_state = (uint8_t) buf_status.arming_state; - log_msg.body.log_STAT.battery_voltage = buf_status.battery_voltage; - log_msg.body.log_STAT.battery_current = buf_status.battery_current; log_msg.body.log_STAT.battery_remaining = buf_status.battery_remaining; log_msg.body.log_STAT.battery_warning = (uint8_t) buf_status.battery_warning; log_msg.body.log_STAT.landed = (uint8_t) buf_status.condition_landed; @@ -1238,6 +1245,17 @@ int sdlog2_thread_main(int argc, char *argv[]) LOGBUFFER_WRITE_AND_COUNT(GVSP); } + /* --- BATTERY --- */ + if (fds[ifds++].revents & POLLIN) { + orb_copy(ORB_ID(battery_status), subs.battery_sub, &buf.battery); + log_msg.msg_type = LOG_BATT_MSG; + log_msg.body.log_BATT.voltage = buf.battery.voltage_v; + log_msg.body.log_BATT.voltage_filtered = buf.battery.voltage_filtered_v; + log_msg.body.log_BATT.current = buf.battery.current_a; + log_msg.body.log_BATT.discharged = buf.battery.discharged_mah; + LOGBUFFER_WRITE_AND_COUNT(BATT); + } + /* signal the other thread new data, but not yet unlock */ if (logbuffer_count(&lb) > MIN_BYTES_TO_WRITE) { /* only request write if several packets can be written at once */ diff --git a/src/modules/sdlog2/sdlog2_messages.h b/src/modules/sdlog2/sdlog2_messages.h index ab4dc9b00..a784a1f30 100644 --- a/src/modules/sdlog2/sdlog2_messages.h +++ b/src/modules/sdlog2/sdlog2_messages.h @@ -148,8 +148,6 @@ struct log_STAT_s { uint8_t main_state; uint8_t navigation_state; uint8_t arming_state; - float battery_voltage; - float battery_current; float battery_remaining; uint8_t battery_warning; uint8_t landed; @@ -248,6 +246,15 @@ struct log_GVSP_s { float vz; }; +/* --- BATT - BATTERY --- */ +#define LOG_BATT_MSG 20 +struct log_BATT_s { + float voltage; + float voltage_filtered; + float current; + float discharged; +}; + /* --- TIME - TIME STAMP --- */ #define LOG_TIME_MSG 129 struct log_TIME_s { @@ -281,7 +288,7 @@ static const struct log_format_s log_formats[] = { LOG_FORMAT(LPSP, "ffff", "X,Y,Z,Yaw"), LOG_FORMAT(GPS, "QBffLLfffff", "GPSTime,FixType,EPH,EPV,Lat,Lon,Alt,VelN,VelE,VelD,Cog"), LOG_FORMAT(ATTC, "ffff", "Roll,Pitch,Yaw,Thrust"), - LOG_FORMAT(STAT, "BBBfffBB", "MainState,NavState,ArmState,BatV,BatC,BatRem,BatWarn,Landed"), + LOG_FORMAT(STAT, "BBBfBB", "MainState,NavState,ArmState,BatRem,BatWarn,Landed"), LOG_FORMAT(RC, "ffffffffB", "Ch0,Ch1,Ch2,Ch3,Ch4,Ch5,Ch6,Ch7,Count"), LOG_FORMAT(OUT0, "ffffffff", "Out0,Out1,Out2,Out3,Out4,Out5,Out6,Out7"), LOG_FORMAT(AIRS, "ff", "IndSpeed,TrueSpeed"), @@ -291,6 +298,7 @@ static const struct log_format_s log_formats[] = { LOG_FORMAT(GPSP, "BLLfffbBffff", "AltRel,Lat,Lon,Alt,Yaw,LoiterR,LoiterDir,NavCmd,P1,P2,P3,P4"), LOG_FORMAT(ESC, "HBBBHHHHHHfH", "Counter,NumESC,Conn,N,Ver,Adr,Volt,Amp,RPM,Temp,SetP,SetPRAW"), LOG_FORMAT(GVSP, "fff", "VX,VY,VZ"), + LOG_FORMAT(BATT, "ffff", "V,VFilt,C,Discharged"), /* system-level messages, ID >= 0x80 */ // FMT: don't write format of format message, it's useless LOG_FORMAT(TIME, "Q", "StartTime"), diff --git a/src/modules/sensors/module.mk b/src/modules/sensors/module.mk index ebbc580e1..aa538fd6b 100644 --- a/src/modules/sensors/module.mk +++ b/src/modules/sensors/module.mk @@ -1,6 +1,6 @@ ############################################################################ # -# Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. +# Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions diff --git a/src/modules/sensors/sensor_params.c b/src/modules/sensors/sensor_params.c index 763723554..bbc84ef93 100644 --- a/src/modules/sensors/sensor_params.c +++ b/src/modules/sensors/sensor_params.c @@ -1,9 +1,6 @@ /**************************************************************************** * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * Author: @author Lorenz Meier <lm@inf.ethz.ch> - * @author Thomas Gubler <thomasgubler@student.ethz.ch> - * @author Julian Oes <joes@student.ethz.ch> + * Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -38,6 +35,10 @@ * @file sensor_params.c * * Parameters defined by the sensors task. + * + * @author Lorenz Meier <lm@inf.ethz.ch> + * @author Julian Oes <joes@student.ethz.ch> + * @author Thomas Gubler <thomasgubler@student.ethz.ch> */ #include <nuttx/config.h> @@ -45,41 +46,98 @@ #include <systemlib/param/param.h> /** - * Gyro X offset FIXME + * Gyro X offset * - * This is an X-axis offset for the gyro. - * Adjust it according to the calibration data. + * This is an X-axis offset for the gyro. Adjust it according to the calibration data. * * @min -10.0 * @max 10.0 - * @group Gyro Config + * @group Sensor Calibration */ PARAM_DEFINE_FLOAT(SENS_GYRO_XOFF, 0.0f); /** - * Gyro Y offset FIXME with dot. + * Gyro Y offset * * @min -10.0 * @max 10.0 - * @group Gyro Config + * @group Sensor Calibration */ PARAM_DEFINE_FLOAT(SENS_GYRO_YOFF, 0.0f); /** - * Gyro Z offset FIXME + * Gyro Z offset * * @min -5.0 * @max 5.0 - * @group Gyro Config + * @group Sensor Calibration */ PARAM_DEFINE_FLOAT(SENS_GYRO_ZOFF, 0.0f); +/** + * Gyro X scaling + * + * X-axis scaling. + * + * @min -1.5 + * @max 1.5 + * @group Sensor Calibration + */ PARAM_DEFINE_FLOAT(SENS_GYRO_XSCALE, 1.0f); + +/** + * Gyro Y scaling + * + * Y-axis scaling. + * + * @min -1.5 + * @max 1.5 + * @group Sensor Calibration + */ PARAM_DEFINE_FLOAT(SENS_GYRO_YSCALE, 1.0f); + +/** + * Gyro Z scaling + * + * Z-axis scaling. + * + * @min -1.5 + * @max 1.5 + * @group Sensor Calibration + */ PARAM_DEFINE_FLOAT(SENS_GYRO_ZSCALE, 1.0f); +/** + * Magnetometer X offset + * + * This is an X-axis offset for the magnetometer. + * + * @min -500.0 + * @max 500.0 + * @group Sensor Calibration + */ PARAM_DEFINE_FLOAT(SENS_MAG_XOFF, 0.0f); + +/** + * Magnetometer Y offset + * + * This is an Y-axis offset for the magnetometer. + * + * @min -500.0 + * @max 500.0 + * @group Sensor Calibration + */ PARAM_DEFINE_FLOAT(SENS_MAG_YOFF, 0.0f); + +/** + * Magnetometer Z offset + * + * This is an Z-axis offset for the magnetometer. + * + * @min -500.0 + * @max 500.0 + * @group Sensor Calibration + */ PARAM_DEFINE_FLOAT(SENS_MAG_ZOFF, 0.0f); PARAM_DEFINE_FLOAT(SENS_MAG_XSCALE, 1.0f); @@ -100,16 +158,114 @@ PARAM_DEFINE_INT32(SENS_DPRES_ANA, 0); PARAM_DEFINE_INT32(SENS_BOARD_ROT, 0); PARAM_DEFINE_INT32(SENS_EXT_MAG_ROT, 0); +/** + * RC Channel 1 Minimum + * + * Minimum value for RC channel 1 + * + * @min 800.0 + * @max 1500.0 + * @group Radio Calibration + */ PARAM_DEFINE_FLOAT(RC1_MIN, 1000.0f); + +/** + * RC Channel 1 Trim + * + * Mid point value (same as min for throttle) + * + * @min 800.0 + * @max 2200.0 + * @group Radio Calibration + */ PARAM_DEFINE_FLOAT(RC1_TRIM, 1500.0f); + +/** + * RC Channel 1 Maximum + * + * Maximum value for RC channel 1 + * + * @min 1500.0 + * @max 2200.0 + * @group Radio Calibration + */ PARAM_DEFINE_FLOAT(RC1_MAX, 2000.0f); + +/** + * RC Channel 1 Reverse + * + * Set to -1 to reverse channel. + * + * @min -1.0 + * @max 1.0 + * @group Radio Calibration + */ PARAM_DEFINE_FLOAT(RC1_REV, 1.0f); + +/** + * RC Channel 1 dead zone + * + * The +- range of this value around the trim value will be considered as zero. + * + * @min 0.0 + * @max 100.0 + * @group Radio Calibration + */ PARAM_DEFINE_FLOAT(RC1_DZ, 10.0f); -PARAM_DEFINE_FLOAT(RC2_MIN, 1000); -PARAM_DEFINE_FLOAT(RC2_TRIM, 1500); -PARAM_DEFINE_FLOAT(RC2_MAX, 2000); +/** + * RC Channel 2 Minimum + * + * Minimum value for RC channel 2 + * + * @min 800.0 + * @max 1500.0 + * @group Radio Calibration + */ +PARAM_DEFINE_FLOAT(RC2_MIN, 1000.0f); + +/** + * RC Channel 2 Trim + * + * Mid point value (same as min for throttle) + * + * @min 800.0 + * @max 2200.0 + * @group Radio Calibration + */ +PARAM_DEFINE_FLOAT(RC2_TRIM, 1500.0f); + +/** + * RC Channel 2 Maximum + * + * Maximum value for RC channel 2 + * + * @min 1500.0 + * @max 2200.0 + * @group Radio Calibration + */ +PARAM_DEFINE_FLOAT(RC2_MAX, 2000.0f); + +/** + * RC Channel 2 Reverse + * + * Set to -1 to reverse channel. + * + * @min -1.0 + * @max 1.0 + * @group Radio Calibration + */ PARAM_DEFINE_FLOAT(RC2_REV, 1.0f); + +/** + * RC Channel 2 dead zone + * + * The +- range of this value around the trim value will be considered as zero. + * + * @min 0.0 + * @max 100.0 + * @group Radio Calibration + */ PARAM_DEFINE_FLOAT(RC2_DZ, 10.0f); PARAM_DEFINE_FLOAT(RC3_MIN, 1000); @@ -223,6 +379,7 @@ PARAM_DEFINE_FLOAT(BAT_V_SCALING, 0.0082f); /* FMU with PX4IOAR: (3.3f * 52.0f / 5.0f / 4095.0f) */ PARAM_DEFINE_FLOAT(BAT_V_SCALING, 0.00459340659f); #endif +PARAM_DEFINE_FLOAT(BAT_C_SCALING, 0.0124); /* scaling for 3DR power brick */ PARAM_DEFINE_INT32(RC_MAP_ROLL, 1); PARAM_DEFINE_INT32(RC_MAP_PITCH, 2); diff --git a/src/modules/sensors/sensors.cpp b/src/modules/sensors/sensors.cpp index d9f037c27..ff6c5882e 100644 --- a/src/modules/sensors/sensors.cpp +++ b/src/modules/sensors/sensors.cpp @@ -114,6 +114,7 @@ #ifdef CONFIG_ARCH_BOARD_PX4FMU_V1 #define ADC_BATTERY_VOLTAGE_CHANNEL 10 +#define ADC_BATTERY_CURRENT_CHANNEL -1 #define ADC_AIRSPEED_VOLTAGE_CHANNEL 11 #endif @@ -124,10 +125,8 @@ #define ADC_AIRSPEED_VOLTAGE_CHANNEL 15 #endif -#define BAT_VOL_INITIAL 0.f -#define BAT_VOL_LOWPASS_1 0.99f -#define BAT_VOL_LOWPASS_2 0.01f -#define VOLTAGE_BATTERY_IGNORE_THRESHOLD_VOLTS 3.5f +#define BATT_V_LOWPASS 0.001f +#define BATT_V_IGNORE_THRESHOLD 3.5f /** * HACK - true temperature is much less than indicated temperature in baro, @@ -215,6 +214,9 @@ private: math::Matrix _external_mag_rotation; /**< rotation matrix for the orientation that an external mag is mounted */ bool _mag_is_external; /**< true if the active mag is on an external board */ + uint64_t _battery_discharged; /**< battery discharged current in mA*ms */ + hrt_abstime _battery_current_timestamp; /**< timestamp of last battery current reading */ + struct { float min[_rc_max_chan_count]; float trim[_rc_max_chan_count]; @@ -265,6 +267,7 @@ private: float rc_fs_thr; float battery_voltage_scaling; + float battery_current_scaling; } _parameters; /**< local copies of interesting parameters */ @@ -314,6 +317,7 @@ private: param_t rc_fs_thr; param_t battery_voltage_scaling; + param_t battery_current_scaling; param_t board_rotation; param_t external_mag_rotation; @@ -467,7 +471,9 @@ Sensors::Sensors() : _board_rotation(3, 3), _external_mag_rotation(3, 3), - _mag_is_external(false) + _mag_is_external(false), + _battery_discharged(0), + _battery_current_timestamp(0) { /* basic r/c parameters */ @@ -560,6 +566,7 @@ Sensors::Sensors() : _parameter_handles.diff_pres_analog_enabled = param_find("SENS_DPRES_ANA"); _parameter_handles.battery_voltage_scaling = param_find("BAT_V_SCALING"); + _parameter_handles.battery_current_scaling = param_find("BAT_C_SCALING"); /* rotations */ _parameter_handles.board_rotation = param_find("SENS_BOARD_ROT"); @@ -740,6 +747,11 @@ Sensors::parameters_update() warnx("Failed updating voltage scaling param"); } + /* scaling of ADC ticks to battery current */ + if (param_get(_parameter_handles.battery_current_scaling, &(_parameters.battery_current_scaling)) != OK) { + warnx("Failed updating current scaling param"); + } + param_get(_parameter_handles.board_rotation, &(_parameters.board_rotation)); param_get(_parameter_handles.external_mag_rotation, &(_parameters.external_mag_rotation)); @@ -1157,17 +1169,16 @@ Sensors::adc_poll(struct sensor_combined_s &raw) if (!_publishing) return; + hrt_abstime t = hrt_absolute_time(); /* rate limit to 100 Hz */ - if (hrt_absolute_time() - _last_adc >= 10000) { + if (t - _last_adc >= 10000) { /* make space for a maximum of eight channels */ struct adc_msg_s buf_adc[8]; /* read all channels available */ int ret = read(_fd_adc, &buf_adc, sizeof(buf_adc)); - for (unsigned i = 0; i < sizeof(buf_adc) / sizeof(buf_adc[0]); i++) { - - if (ret >= (int)sizeof(buf_adc[0])) { - + if (ret >= (int)sizeof(buf_adc[0])) { + for (unsigned i = 0; i < sizeof(buf_adc) / sizeof(buf_adc[0]); i++) { /* Save raw voltage values */ if (i < (sizeof(raw.adc_voltage_v)) / sizeof(raw.adc_voltage_v[0])) { raw.adc_voltage_v[i] = buf_adc[i].am_data / (4096.0f / 3.3f); @@ -1178,27 +1189,40 @@ Sensors::adc_poll(struct sensor_combined_s &raw) /* Voltage in volts */ float voltage = (buf_adc[i].am_data * _parameters.battery_voltage_scaling); - if (voltage > VOLTAGE_BATTERY_IGNORE_THRESHOLD_VOLTS) { - + if (voltage > BATT_V_IGNORE_THRESHOLD) { + _battery_status.voltage_v = voltage; /* one-time initialization of low-pass value to avoid long init delays */ - if (_battery_status.voltage_v < 3.0f) { - _battery_status.voltage_v = voltage; + if (_battery_status.voltage_filtered_v < BATT_V_IGNORE_THRESHOLD) { + _battery_status.voltage_filtered_v = voltage; } - _battery_status.timestamp = hrt_absolute_time(); - _battery_status.voltage_v = (BAT_VOL_LOWPASS_1 * (_battery_status.voltage_v + BAT_VOL_LOWPASS_2 * voltage));; - /* current and discharge are unknown */ - _battery_status.current_a = -1.0f; - _battery_status.discharged_mah = -1.0f; + _battery_status.timestamp = t; + _battery_status.voltage_filtered_v += (voltage - _battery_status.voltage_filtered_v) * BATT_V_LOWPASS; - /* announce the battery voltage if needed, just publish else */ - if (_battery_pub > 0) { - orb_publish(ORB_ID(battery_status), _battery_pub, &_battery_status); + } else { + /* mark status as invalid */ + _battery_status.voltage_v = -1.0f; + _battery_status.voltage_filtered_v = -1.0f; + } - } else { - _battery_pub = orb_advertise(ORB_ID(battery_status), &_battery_status); + } else if (ADC_BATTERY_CURRENT_CHANNEL == buf_adc[i].am_channel) { + /* handle current only if voltage is valid */ + if (_battery_status.voltage_v > 0.0f) { + float current = (buf_adc[i].am_data * _parameters.battery_current_scaling); + /* check measured current value */ + if (current >= 0.0f) { + _battery_status.timestamp = t; + _battery_status.current_a = current; + if (_battery_current_timestamp != 0) { + /* initialize discharged value */ + if (_battery_status.discharged_mah < 0.0f) + _battery_status.discharged_mah = 0.0f; + _battery_discharged += current * (t - _battery_current_timestamp); + _battery_status.discharged_mah = ((float) _battery_discharged) / 3600000.0f; + } } } + _battery_current_timestamp = t; } else if (ADC_AIRSPEED_VOLTAGE_CHANNEL == buf_adc[i].am_channel) { @@ -1214,7 +1238,7 @@ Sensors::adc_poll(struct sensor_combined_s &raw) float diff_pres_pa = voltage * 1000.0f - _parameters.diff_pres_offset_pa; //for MPXV7002DP sensor - _diff_pres.timestamp = hrt_absolute_time(); + _diff_pres.timestamp = t; _diff_pres.differential_pressure_pa = diff_pres_pa; _diff_pres.voltage = voltage; @@ -1227,8 +1251,16 @@ Sensors::adc_poll(struct sensor_combined_s &raw) } } } - - _last_adc = hrt_absolute_time(); + } + _last_adc = t; + if (_battery_status.voltage_v > 0.0f) { + /* announce the battery status if needed, just publish else */ + if (_battery_pub > 0) { + orb_publish(ORB_ID(battery_status), _battery_pub, &_battery_status); + + } else { + _battery_pub = orb_advertise(ORB_ID(battery_status), &_battery_status); + } } } } @@ -1516,7 +1548,10 @@ Sensors::task_main() raw.adc_voltage_v[3] = 0.0f; memset(&_battery_status, 0, sizeof(_battery_status)); - _battery_status.voltage_v = BAT_VOL_INITIAL; + _battery_status.voltage_v = 0.0f; + _battery_status.voltage_filtered_v = 0.0f; + _battery_status.current_a = -1.0f; + _battery_status.discharged_mah = -1.0f; /* get a set of initial values */ accel_poll(raw); diff --git a/src/modules/systemlib/board_serial.c b/src/modules/systemlib/board_serial.c new file mode 100644 index 000000000..ad8c2bf83 --- /dev/null +++ b/src/modules/systemlib/board_serial.c @@ -0,0 +1,60 @@ +/**************************************************************************** + * + * Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file board_serial.h + * Read off the board serial + * + * @author Lorenz Meier <lm@inf.ethz.ch> + * @author David "Buzz" Bussenschutt <davidbuzz@gmail.com> + * + */ + +#include "otp.h" +#include "board_config.h" +#include "board_serial.h" + +int get_board_serial(char *serialid) +{ + const volatile unsigned *udid_ptr = (const unsigned *)UDID_START; + union udid id; + val_read((unsigned *)&id, udid_ptr, sizeof(id)); + + + /* Copy the serial from the chips non-write memory and swap endianess */ + serialid[0] = id.data[3]; serialid[1] = id.data[2]; serialid[2] = id.data[1]; serialid[3] = id.data[0]; + serialid[4] = id.data[7]; serialid[5] = id.data[6]; serialid[6] = id.data[5]; serialid[7] = id.data[4]; + serialid[8] = id.data[11]; serialid[9] = id.data[10]; serialid[10] = id.data[9]; serialid[11] = id.data[8]; + + return 0; +}
\ No newline at end of file diff --git a/src/modules/systemlib/board_serial.h b/src/modules/systemlib/board_serial.h new file mode 100644 index 000000000..b14bb4376 --- /dev/null +++ b/src/modules/systemlib/board_serial.h @@ -0,0 +1,49 @@ +/**************************************************************************** + * + * Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file board_serial.h + * Read off the board serial + * + * @author Lorenz Meier <lm@inf.ethz.ch> + * @author David "Buzz" Bussenschutt <davidbuzz@gmail.com> + * + */ + +#pragma once + +__BEGIN_DECLS + +__EXPORT int get_board_serial(char *serialid); + +__END_DECLS diff --git a/src/modules/systemlib/bson/tinybson.c b/src/modules/systemlib/bson/tinybson.c index 8aca6a25d..49403c98b 100644 --- a/src/modules/systemlib/bson/tinybson.c +++ b/src/modules/systemlib/bson/tinybson.c @@ -407,6 +407,9 @@ bson_encoder_fini(bson_encoder_t encoder) memcpy(encoder->buf, &len, sizeof(len)); } + /* sync file */ + fsync(encoder->fd); + return 0; } diff --git a/src/modules/systemlib/module.mk b/src/modules/systemlib/module.mk index 843cda722..8c6c300d6 100644 --- a/src/modules/systemlib/module.mk +++ b/src/modules/systemlib/module.mk @@ -49,4 +49,7 @@ SRCS = err.c \ airspeed.c \ system_params.c \ mavlink_log.c \ - rc_check.c + rc_check.c \ + otp.c \ + board_serial.c + diff --git a/src/modules/systemlib/otp.c b/src/modules/systemlib/otp.c new file mode 100644 index 000000000..695574fdc --- /dev/null +++ b/src/modules/systemlib/otp.c @@ -0,0 +1,224 @@ +/**************************************************************************** + * + * Copyright (C) 2012-2013 PX4 Development Team. All rights reserved. + * Authors: + * Lorenz Meier <lm@inf.ethz.ch> + * David "Buzz" Bussenschutt <davidbuzz@gmail.com> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file otp.c + * otp estimation + * + * @author Lorenz Meier <lm@inf.ethz.ch> + * @author David "Buzz" Bussenschutt <davidbuzz@gmail.com> + * + */ + +#include <nuttx/config.h> +#include <board_config.h> +#include <stdio.h> +#include <math.h> +#include <unistd.h> +#include <string.h> // memset +#include "conversions.h" +#include "otp.h" +#include "err.h" // warnx +#include <assert.h> + + +int val_read(void *dest, volatile const void *src, int bytes) +{ + + int i; + + for (i = 0; i < bytes / 4; i++) { + *(((volatile unsigned *)dest) + i) = *(((volatile unsigned *)src) + i); + } + + return i * 4; +} + + +int write_otp(uint8_t id_type, uint32_t vid, uint32_t pid, char *signature) +{ + + warnx("write_otp: PX4 / %02X / %02X / %02X / ... etc \n", id_type, vid, pid); + + int errors = 0; + + // descriptor + if (F_write_byte(ADDR_OTP_START, 'P')) + errors++; + // write the 'P' from PX4. to first byte in OTP + if (F_write_byte(ADDR_OTP_START + 1, 'X')) + errors++; // write the 'P' from PX4. to first byte in OTP + if (F_write_byte(ADDR_OTP_START + 2, '4')) + errors++; + if (F_write_byte(ADDR_OTP_START + 3, '\0')) + errors++; + //id_type + if (F_write_byte(ADDR_OTP_START + 4, id_type)) + errors++; + // vid and pid are 4 bytes each + if (F_write_word(ADDR_OTP_START + 5, vid)) + errors++; + if (F_write_word(ADDR_OTP_START + 9, pid)) + errors++; + + // leave some 19 bytes of space, and go to the next block... + // then the auth sig starts + for (int i = 0 ; i < 128 ; i++) { + if (F_write_byte(ADDR_OTP_START + 32 + i, signature[i])) + errors++; + } + + return errors; +} + +int lock_otp(void) +{ + //determine the required locking size - can only write full lock bytes */ +// int size = sizeof(struct otp) / 32; +// +// struct otp_lock otp_lock_mem; +// +// memset(&otp_lock_mem, OTP_LOCK_UNLOCKED, sizeof(otp_lock_mem)); +// for (int i = 0; i < sizeof(otp_lock_mem) / sizeof(otp_lock_mem.lock_bytes[0]); i++) +// otp_lock_mem.lock_bytes[i] = OTP_LOCK_LOCKED; + //XXX add the actual call here to write the OTP_LOCK bytes only at final stage + // val_copy(lock_ptr, &otp_lock_mem, sizeof(otp_lock_mem)); + + int locksize = 5; + + int errors = 0; + + // or just realise it's exctly 5x 32byte blocks we need to lock. 1 block for ID,type,vid,pid, and 4 blocks for certificate, which is 128 bytes. + for (int i = 0 ; i < locksize ; i++) { + if (F_write_byte(ADDR_OTP_LOCK_START + i, OTP_LOCK_LOCKED)) + errors++; + } + + return errors; +} + + + +// COMPLETE, BUSY, or other flash error? +int F_GetStatus(void) +{ + int fs = F_COMPLETE; + + if ((FLASH->status & F_BSY) == F_BSY) { fs = F_BUSY; } else { + + if ((FLASH->status & F_WRPERR) != (uint32_t)0x00) { fs = F_ERROR_WRP; } else { + + if ((FLASH->status & (uint32_t)0xEF) != (uint32_t)0x00) { fs = F_ERROR_PROGRAM; } else { + + if ((FLASH->status & F_OPERR) != (uint32_t)0x00) { fs = F_ERROR_OPERATION; } else { + fs = F_COMPLETE; + } + } + } + } + + return fs; +} + + +// enable FLASH Registers +void F_unlock(void) +{ + if ((FLASH->control & F_CR_LOCK) != 0) { + FLASH->key = F_KEY1; + FLASH->key = F_KEY2; + } +} + +// lock the FLASH Registers +void F_lock(void) +{ + FLASH->control |= F_CR_LOCK; +} + +// flash write word. +int F_write_word(uint32_t Address, uint32_t Data) +{ + unsigned char octet[4] = {0, 0, 0, 0}; + + int ret = 0; + + for (int i = 0; i < 4; i++) { + octet[i] = (Data >> (i * 8)) & 0xFF; + ret = F_write_byte(Address + i, octet[i]); + } + + return ret; +} + +// flash write byte +int F_write_byte(uint32_t Address, uint8_t Data) +{ + volatile int status = F_COMPLETE; + + //warnx("F_write_byte: %08X %02d", Address , Data ) ; + + //Check the parameters + assert(IS_F_ADDRESS(Address)); + + //Wait for FLASH operation to complete by polling on BUSY flag. + status = F_GetStatus(); + + while (status == F_BUSY) { status = F_GetStatus();} + + if (status == F_COMPLETE) { + //if the previous operation is completed, proceed to program the new data + FLASH->control &= CR_PSIZE_MASK; + FLASH->control |= F_PSIZE_BYTE; + FLASH->control |= F_CR_PG; + + *(volatile uint8_t *)Address = Data; + + //Wait for FLASH operation to complete by polling on BUSY flag. + status = F_GetStatus(); + + while (status == F_BUSY) { status = F_GetStatus();} + + //if the program operation is completed, disable the PG Bit + FLASH->control &= (~F_CR_PG); + } + + //Return the Program Status + return !(status == F_COMPLETE); +} + + + diff --git a/src/modules/systemlib/otp.h b/src/modules/systemlib/otp.h new file mode 100644 index 000000000..f10e129d8 --- /dev/null +++ b/src/modules/systemlib/otp.h @@ -0,0 +1,151 @@ +/**************************************************************************** + * + * Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file otp.h + * One TIme Programmable ( OTP ) Flash routine/s. + * + * @author Lorenz Meier <lm@inf.ethz.ch> + * @author David "Buzz" Bussenschutt <davidbuzz@gmail.com> + * + */ + +#ifndef OTP_H_ +#define OTP_H_ + +__BEGIN_DECLS + +#define ADDR_OTP_START 0x1FFF7800 +#define ADDR_OTP_LOCK_START 0x1FFF7A00 + +#define OTP_LOCK_LOCKED 0x00 +#define OTP_LOCK_UNLOCKED 0xFF + + + +#include <unistd.h> +#include <stdio.h> + +// possible flash statuses +#define F_BUSY 1 +#define F_ERROR_WRP 2 +#define F_ERROR_PROGRAM 3 +#define F_ERROR_OPERATION 4 +#define F_COMPLETE 5 + +typedef struct { + volatile uint32_t accesscontrol; // 0x00 + volatile uint32_t key; // 0x04 + volatile uint32_t optionkey; // 0x08 + volatile uint32_t status; // 0x0C + volatile uint32_t control; // 0x10 + volatile uint32_t optioncontrol; //0x14 +} flash_registers; + +#define PERIPH_BASE ((uint32_t)0x40000000) //Peripheral base address +#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000) +#define F_R_BASE (AHB1PERIPH_BASE + 0x3C00) +#define FLASH ((flash_registers *) F_R_BASE) + +#define F_BSY ((uint32_t)0x00010000) //FLASH Busy flag bit +#define F_OPERR ((uint32_t)0x00000002) //FLASH operation Error flag bit +#define F_WRPERR ((uint32_t)0x00000010) //FLASH Write protected error flag bit +#define CR_PSIZE_MASK ((uint32_t)0xFFFFFCFF) +#define F_PSIZE_WORD ((uint32_t)0x00000200) +#define F_PSIZE_BYTE ((uint32_t)0x00000000) +#define F_CR_PG ((uint32_t)0x00000001) // a bit in the F_CR register +#define F_CR_LOCK ((uint32_t)0x80000000) // also another bit. + +#define F_KEY1 ((uint32_t)0x45670123) +#define F_KEY2 ((uint32_t)0xCDEF89AB) +#define IS_F_ADDRESS(ADDRESS) ((((ADDRESS) >= 0x08000000) && ((ADDRESS) < 0x080FFFFF)) || (((ADDRESS) >= 0x1FFF7800) && ((ADDRESS) < 0x1FFF7A0F))) + + + +#pragma pack(push, 1) + +/* + * The OTP area is divided into 16 OTP data blocks of 32 bytes and one lock OTP block of 16 bytes. + * The OTP data and lock blocks cannot be erased. The lock block contains 16 bytes LOCKBi (0 ≤ i ≤ 15) + * to lock the corresponding OTP data block (blocks 0 to 15). Each OTP data block can be programmed + * until the value 0x00 is programmed in the corresponding OTP lock byte. The lock bytes must only + * contain 0x00 and 0xFF values, otherwise the OTP bytes might not be taken into account correctly. + */ + +struct otp { + // first 32 bytes = the '0' Block + char id[4]; ///4 bytes < 'P' 'X' '4' '\n' + uint8_t id_type; ///1 byte < 0 for USB VID, 1 for generic VID + uint32_t vid; ///4 bytes + uint32_t pid; ///4 bytes + char unused[19]; ///19 bytes + // Cert-of-Auth is next 4 blocks ie 1-4 ( where zero is first block ) + char signature[128]; + // insert extras here + uint32_t lock_bytes[4]; +}; + +struct otp_lock { + uint8_t lock_bytes[16]; +}; +#pragma pack(pop) + +#define ADDR_F_SIZE 0x1FFF7A22 + +#pragma pack(push, 1) +union udid { + uint32_t serial[3]; + char data[12]; +}; +#pragma pack(pop) + + +/** + * s + */ +//__EXPORT float calc_indicated_airspeed(float differential_pressure); + +__EXPORT void F_unlock(void); +__EXPORT void F_lock(void); +__EXPORT int val_read(void *dest, volatile const void *src, int bytes); +__EXPORT int val_write(volatile void *dest, const void *src, int bytes); +__EXPORT int write_otp(uint8_t id_type, uint32_t vid, uint32_t pid, char *signature); +__EXPORT int lock_otp(void); + + +__EXPORT int F_write_byte(uint32_t Address, uint8_t Data); +__EXPORT int F_write_word(uint32_t Address, uint32_t Data); + +__END_DECLS + +#endif diff --git a/src/modules/systemlib/param/param.c b/src/modules/systemlib/param/param.c index 398657dd7..2d773fd25 100644 --- a/src/modules/systemlib/param/param.c +++ b/src/modules/systemlib/param/param.c @@ -1,6 +1,6 @@ /**************************************************************************** * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -61,7 +61,7 @@ #include "uORB/uORB.h" #include "uORB/topics/parameter_update.h" -#if 1 +#if 0 # define debug(fmt, args...) do { warnx(fmt, ##args); } while(0) #else # define debug(fmt, args...) do { } while(0) @@ -512,6 +512,28 @@ param_save_default(void) int fd; const char *filename = param_get_default_file(); + + /* write parameters to temp file */ + fd = open(filename, O_WRONLY | O_CREAT); + + if (fd < 0) { + warn("failed to open param file: %s", filename); + return ERROR; + } + + if (res == OK) { + res = param_export(fd, false); + + if (res != OK) { + warnx("failed to write parameters to file: %s", filename); + } + } + + close(fd); + + return res; + +#if 0 const char *filename_tmp = malloc(strlen(filename) + 5); sprintf(filename_tmp, "%s.tmp", filename); @@ -565,6 +587,7 @@ param_save_default(void) free(filename_tmp); return res; +#endif } /** @@ -573,9 +596,9 @@ param_save_default(void) int param_load_default(void) { - int fd = open(param_get_default_file(), O_RDONLY); + int fd_load = open(param_get_default_file(), O_RDONLY); - if (fd < 0) { + if (fd_load < 0) { /* no parameter file is OK, otherwise this is an error */ if (errno != ENOENT) { warn("open '%s' for reading failed", param_get_default_file()); @@ -584,8 +607,8 @@ param_load_default(void) return 1; } - int result = param_load(fd); - close(fd); + int result = param_load(fd_load); + close(fd_load); if (result != 0) { warn("error reading parameters from '%s'", param_get_default_file()); diff --git a/src/modules/uORB/topics/battery_status.h b/src/modules/uORB/topics/battery_status.h index c40d0d4e5..d473dff3f 100644 --- a/src/modules/uORB/topics/battery_status.h +++ b/src/modules/uORB/topics/battery_status.h @@ -53,9 +53,10 @@ */ struct battery_status_s { uint64_t timestamp; /**< microseconds since system boot, needed to integrate */ - float voltage_v; /**< Battery voltage in volts, filtered */ - float current_a; /**< Battery current in amperes, filtered, -1 if unknown */ - float discharged_mah; /**< Discharged amount in mAh, filtered, -1 if unknown */ + float voltage_v; /**< Battery voltage in volts, 0 if unknown */ + float voltage_filtered_v; /**< Battery voltage in volts, filtered, 0 if unknown */ + float current_a; /**< Battery current in amperes, -1 if unknown */ + float discharged_mah; /**< Discharged amount in mAh, -1 if unknown */ }; /** @@ -65,4 +66,4 @@ struct battery_status_s { /* register this as object request broker structure */ ORB_DECLARE(battery_status); -#endif
\ No newline at end of file +#endif diff --git a/src/systemcmds/eeprom/eeprom.c b/src/systemcmds/eeprom/eeprom.c deleted file mode 100644 index 2aed80e01..000000000 --- a/src/systemcmds/eeprom/eeprom.c +++ /dev/null @@ -1,265 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * Author: Lorenz Meier <lm@inf.ethz.ch> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/** - * @file eeprom.c - * - * EEPROM service and utility app. - */ - -#include <nuttx/config.h> - -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <stdbool.h> -#include <unistd.h> -#include <fcntl.h> -#include <sys/mount.h> -#include <sys/ioctl.h> -#include <sys/stat.h> - -#include <nuttx/i2c.h> -#include <nuttx/mtd.h> -#include <nuttx/fs/nxffs.h> -#include <nuttx/fs/ioctl.h> - -#include <board_config.h> - -#include "systemlib/systemlib.h" -#include "systemlib/param/param.h" -#include "systemlib/err.h" - -#ifndef PX4_I2C_BUS_ONBOARD -# error PX4_I2C_BUS_ONBOARD not defined, cannot locate onboard EEPROM -#endif - -__EXPORT int eeprom_main(int argc, char *argv[]); - -static void eeprom_attach(void); -static void eeprom_start(void); -static void eeprom_erase(void); -static void eeprom_ioctl(unsigned operation); -static void eeprom_save(const char *name); -static void eeprom_load(const char *name); -static void eeprom_test(void); - -static bool attached = false; -static bool started = false; -static struct mtd_dev_s *eeprom_mtd; - -int eeprom_main(int argc, char *argv[]) -{ - if (argc >= 2) { - if (!strcmp(argv[1], "start")) - eeprom_start(); - - if (!strcmp(argv[1], "save_param")) - eeprom_save(argv[2]); - - if (!strcmp(argv[1], "load_param")) - eeprom_load(argv[2]); - - if (!strcmp(argv[1], "erase")) - eeprom_erase(); - - if (!strcmp(argv[1], "test")) - eeprom_test(); - - if (0) { /* these actually require a file on the filesystem... */ - - if (!strcmp(argv[1], "reformat")) - eeprom_ioctl(FIOC_REFORMAT); - - if (!strcmp(argv[1], "repack")) - eeprom_ioctl(FIOC_OPTIMIZE); - } - } - - errx(1, "expected a command, try 'start'\n\t'save_param /eeprom/parameters'\n\t'load_param /eeprom/parameters'\n\t'erase'\n"); -} - - -static void -eeprom_attach(void) -{ - /* find the right I2C */ - struct i2c_dev_s *i2c = up_i2cinitialize(PX4_I2C_BUS_ONBOARD); - /* this resets the I2C bus, set correct bus speed again */ - I2C_SETFREQUENCY(i2c, 400000); - - if (i2c == NULL) - errx(1, "failed to locate I2C bus"); - - /* start the MTD driver, attempt 5 times */ - for (int i = 0; i < 5; i++) { - eeprom_mtd = at24c_initialize(i2c); - if (eeprom_mtd) { - /* abort on first valid result */ - if (i > 0) { - warnx("warning: EEPROM needed %d attempts to attach", i+1); - } - break; - } - } - - /* if last attempt is still unsuccessful, abort */ - if (eeprom_mtd == NULL) - errx(1, "failed to initialize EEPROM driver"); - - attached = true; -} - -static void -eeprom_start(void) -{ - int ret; - - if (started) - errx(1, "EEPROM already mounted"); - - if (!attached) - eeprom_attach(); - - /* start NXFFS */ - ret = nxffs_initialize(eeprom_mtd); - - if (ret < 0) - errx(1, "failed to initialize NXFFS - erase EEPROM to reformat"); - - /* mount the EEPROM */ - ret = mount(NULL, "/eeprom", "nxffs", 0, NULL); - - if (ret < 0) - errx(1, "failed to mount /eeprom - erase EEPROM to reformat"); - - started = true; - warnx("mounted EEPROM at /eeprom"); - exit(0); -} - -extern int at24c_nuke(void); - -static void -eeprom_erase(void) -{ - if (!attached) - eeprom_attach(); - - if (at24c_nuke()) - errx(1, "erase failed"); - - errx(0, "erase done, reboot now"); -} - -static void -eeprom_ioctl(unsigned operation) -{ - int fd; - - fd = open("/eeprom/.", 0); - - if (fd < 0) - err(1, "open /eeprom"); - - if (ioctl(fd, operation, 0) < 0) - err(1, "ioctl"); - - exit(0); -} - -static void -eeprom_save(const char *name) -{ - if (!started) - errx(1, "must be started first"); - - if (!name) - err(1, "missing argument for device name, try '/eeprom/parameters'"); - - warnx("WARNING: 'eeprom save_param' deprecated - use 'param save' instead"); - - /* delete the file in case it exists */ - unlink(name); - - /* create the file */ - int fd = open(name, O_WRONLY | O_CREAT | O_EXCL); - - if (fd < 0) - err(1, "opening '%s' failed", name); - - int result = param_export(fd, false); - close(fd); - - if (result < 0) { - unlink(name); - errx(1, "error exporting to '%s'", name); - } - - exit(0); -} - -static void -eeprom_load(const char *name) -{ - if (!started) - errx(1, "must be started first"); - - if (!name) - err(1, "missing argument for device name, try '/eeprom/parameters'"); - - warnx("WARNING: 'eeprom load_param' deprecated - use 'param load' instead"); - - int fd = open(name, O_RDONLY); - - if (fd < 0) - err(1, "open '%s'", name); - - int result = param_load(fd); - close(fd); - - if (result < 0) - errx(1, "error importing from '%s'", name); - - exit(0); -} - -extern void at24c_test(void); - -static void -eeprom_test(void) -{ - at24c_test(); - exit(0); -} diff --git a/src/systemcmds/esc_calib/esc_calib.c b/src/systemcmds/esc_calib/esc_calib.c index b237b31be..ad1996694 100644 --- a/src/systemcmds/esc_calib/esc_calib.c +++ b/src/systemcmds/esc_calib/esc_calib.c @@ -148,6 +148,7 @@ esc_calib_main(int argc, char *argv[]) case 'l': /* Read in custom low value */ + pwm_low = strtoul(optarg, &ep, 0); if (*ep != '\0' || pwm_low < PWM_LOWEST_MIN || pwm_low > PWM_HIGHEST_MIN) usage("low PWM invalid"); break; diff --git a/src/systemcmds/eeprom/24xxxx_mtd.c b/src/systemcmds/mtd/24xxxx_mtd.c index e34be44e3..e34be44e3 100644 --- a/src/systemcmds/eeprom/24xxxx_mtd.c +++ b/src/systemcmds/mtd/24xxxx_mtd.c diff --git a/src/systemcmds/mtd/module.mk b/src/systemcmds/mtd/module.mk new file mode 100644 index 000000000..b3fceceb5 --- /dev/null +++ b/src/systemcmds/mtd/module.mk @@ -0,0 +1,6 @@ +# +# RAMTRON file system driver +# + +MODULE_COMMAND = mtd +SRCS = mtd.c 24xxxx_mtd.c diff --git a/src/systemcmds/mtd/mtd.c b/src/systemcmds/mtd/mtd.c new file mode 100644 index 000000000..41da63750 --- /dev/null +++ b/src/systemcmds/mtd/mtd.c @@ -0,0 +1,378 @@ +/**************************************************************************** + * + * Copyright (c) 2013-2014 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file mtd.c + * + * mtd service and utility app. + * + * @author Lorenz Meier <lm@inf.ethz.ch> + */ + +#include <nuttx/config.h> + +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <stdbool.h> +#include <unistd.h> +#include <fcntl.h> +#include <sys/mount.h> +#include <sys/ioctl.h> +#include <sys/stat.h> + +#include <nuttx/spi.h> +#include <nuttx/mtd.h> +#include <nuttx/fs/nxffs.h> +#include <nuttx/fs/ioctl.h> + +#include <arch/board/board.h> + +#include "systemlib/systemlib.h" +#include "systemlib/param/param.h" +#include "systemlib/err.h" + +#include <board_config.h> + +__EXPORT int mtd_main(int argc, char *argv[]); + +#ifndef CONFIG_MTD + +/* create a fake command with decent warnx to not confuse users */ +int mtd_main(int argc, char *argv[]) +{ + errx(1, "MTD not enabled, skipping."); +} + +#else + +#ifdef CONFIG_MTD_RAMTRON +static void ramtron_attach(void); +#else + +#ifndef PX4_I2C_BUS_ONBOARD +# error PX4_I2C_BUS_ONBOARD not defined, cannot locate onboard EEPROM +#endif + +static void at24xxx_attach(void); +#endif +static void mtd_start(char *partition_names[], unsigned n_partitions); +static void mtd_test(void); +static void mtd_erase(char *partition_names[], unsigned n_partitions); +static void mtd_print_info(); +static int mtd_get_geometry(unsigned long *blocksize, unsigned long *erasesize, unsigned long *neraseblocks, + unsigned *blkpererase, unsigned *nblocks, unsigned *partsize, unsigned n_partitions); + +static bool attached = false; +static bool started = false; +static struct mtd_dev_s *mtd_dev; +static unsigned n_partitions_current = 0; + +/* note, these will be equally sized */ +static char *partition_names_default[] = {"/fs/mtd_params", "/fs/mtd_waypoints"}; +static const int n_partitions_default = sizeof(partition_names_default) / sizeof(partition_names_default[0]); + +int mtd_main(int argc, char *argv[]) +{ + if (argc >= 2) { + if (!strcmp(argv[1], "start")) { + + /* start mapping according to user request */ + if (argc > 3) { + mtd_start(argv + 2, argc - 2); + + } else { + mtd_start(partition_names_default, n_partitions_default); + } + } + + if (!strcmp(argv[1], "test")) + mtd_test(); + + if (!strcmp(argv[1], "status")) + mtd_status(); + + if (!strcmp(argv[1], "erase")) { + if (argc < 3) { + errx(1, "usage: mtd erase <PARTITION_PATH..>"); + } + mtd_erase(argv + 2, argc - 2); + } + } + + errx(1, "expected a command, try 'start', 'erase' or 'test'"); +} + +struct mtd_dev_s *ramtron_initialize(FAR struct spi_dev_s *dev); +struct mtd_dev_s *mtd_partition(FAR struct mtd_dev_s *mtd, + off_t firstblock, off_t nblocks); + +#ifdef CONFIG_MTD_RAMTRON +static void +ramtron_attach(void) +{ + /* find the right spi */ + struct spi_dev_s *spi = up_spiinitialize(2); + /* this resets the spi bus, set correct bus speed again */ + SPI_SETFREQUENCY(spi, 40 * 1000 * 1000); + SPI_SETBITS(spi, 8); + SPI_SETMODE(spi, SPIDEV_MODE3); + SPI_SELECT(spi, SPIDEV_FLASH, false); + + if (spi == NULL) + errx(1, "failed to locate spi bus"); + + /* start the RAMTRON driver, attempt 5 times */ + for (int i = 0; i < 5; i++) { + mtd_dev = ramtron_initialize(spi); + + if (mtd_dev) { + /* abort on first valid result */ + if (i > 0) { + warnx("warning: mtd needed %d attempts to attach", i + 1); + } + + break; + } + } + + /* if last attempt is still unsuccessful, abort */ + if (mtd_dev == NULL) + errx(1, "failed to initialize mtd driver"); + + attached = true; +} +#else + +static void +at24xxx_attach(void) +{ + /* find the right I2C */ + struct i2c_dev_s *i2c = up_i2cinitialize(PX4_I2C_BUS_ONBOARD); + /* this resets the I2C bus, set correct bus speed again */ + I2C_SETFREQUENCY(i2c, 400000); + + if (i2c == NULL) + errx(1, "failed to locate I2C bus"); + + /* start the MTD driver, attempt 5 times */ + for (int i = 0; i < 5; i++) { + mtd_dev = at24c_initialize(i2c); + if (mtd_dev) { + /* abort on first valid result */ + if (i > 0) { + warnx("warning: EEPROM needed %d attempts to attach", i+1); + } + break; + } + } + + /* if last attempt is still unsuccessful, abort */ + if (mtd_dev == NULL) + errx(1, "failed to initialize EEPROM driver"); + + attached = true; +} +#endif + +static void +mtd_start(char *partition_names[], unsigned n_partitions) +{ + int ret; + + if (started) + errx(1, "mtd already mounted"); + + if (!attached) { + #ifdef CONFIG_ARCH_BOARD_PX4FMU_V1 + at24xxx_attach(); + #else + ramtron_attach(); + #endif + } + + if (!mtd_dev) { + warnx("ERROR: Failed to create RAMTRON FRAM MTD instance"); + exit(1); + } + + unsigned long blocksize, erasesize, neraseblocks; + unsigned blkpererase, nblocks, partsize; + + ret = mtd_get_geometry(&blocksize, &erasesize, &neraseblocks, &blkpererase, &nblocks, &partsize, n_partitions); + if (ret) + exit(3); + + /* Now create MTD FLASH partitions */ + + warnx("Creating partitions"); + FAR struct mtd_dev_s *part[n_partitions]; + char blockname[32]; + + unsigned offset; + unsigned i; + + for (offset = 0, i = 0; i < n_partitions; offset += nblocks, i++) { + + warnx(" Partition %d. Block offset=%lu, size=%lu", + i, (unsigned long)offset, (unsigned long)nblocks); + + /* Create the partition */ + + part[i] = mtd_partition(mtd_dev, offset, nblocks); + + if (!part[i]) { + warnx("ERROR: mtd_partition failed. offset=%lu nblocks=%lu", + (unsigned long)offset, (unsigned long)nblocks); + exit(4); + } + + /* Initialize to provide an FTL block driver on the MTD FLASH interface */ + + snprintf(blockname, sizeof(blockname), "/dev/mtdblock%d", i); + + ret = ftl_initialize(i, part[i]); + + if (ret < 0) { + warnx("ERROR: ftl_initialize %s failed: %d", blockname, ret); + exit(5); + } + + /* Now create a character device on the block device */ + + ret = bchdev_register(blockname, partition_names[i], false); + + if (ret < 0) { + warnx("ERROR: bchdev_register %s failed: %d", partition_names[i], ret); + exit(6); + } + } + + n_partitions_current = n_partitions; + + started = true; + exit(0); +} + +int mtd_get_geometry(unsigned long *blocksize, unsigned long *erasesize, unsigned long *neraseblocks, + unsigned *blkpererase, unsigned *nblocks, unsigned *partsize, unsigned n_partitions) +{ + /* Get the geometry of the FLASH device */ + + FAR struct mtd_geometry_s geo; + + int ret = mtd_dev->ioctl(mtd_dev, MTDIOC_GEOMETRY, (unsigned long)((uintptr_t)&geo)); + + if (ret < 0) { + warnx("ERROR: mtd->ioctl failed: %d", ret); + return ret; + } + + *blocksize = geo.blocksize; + *erasesize = geo.blocksize; + *neraseblocks = geo.neraseblocks; + + /* Determine the size of each partition. Make each partition an even + * multiple of the erase block size (perhaps not using some space at the + * end of the FLASH). + */ + + *blkpererase = geo.erasesize / geo.blocksize; + *nblocks = (geo.neraseblocks / n_partitions) * *blkpererase; + *partsize = *nblocks * geo.blocksize; + + return ret; +} + +void mtd_print_info() +{ + if (!attached) + exit(1); + + unsigned long blocksize, erasesize, neraseblocks; + unsigned blkpererase, nblocks, partsize; + + int ret = mtd_get_geometry(&blocksize, &erasesize, &neraseblocks, &blkpererase, &nblocks, &partsize, n_partitions_current); + if (ret) + exit(3); + + warnx("Flash Geometry:"); + + printf(" blocksize: %lu\n", blocksize); + printf(" erasesize: %lu\n", erasesize); + printf(" neraseblocks: %lu\n", neraseblocks); + printf(" No. partitions: %u\n", n_partitions_current); + printf(" Partition size: %u Blocks (%u bytes)\n", nblocks, partsize); + printf(" TOTAL SIZE: %u KiB\n", neraseblocks * erasesize / 1024); + +} + +void +mtd_test(void) +{ + warnx("This test routine does not test anything yet!"); + exit(1); +} + +void +mtd_status(void) +{ + if (!attached) + errx(1, "MTD driver not started"); + + mtd_print_info(); + exit(0); +} + +void +mtd_erase(char *partition_names[], unsigned n_partitions) +{ + uint8_t v[64]; + memset(v, 0xFF, sizeof(v)); + for (uint8_t i = 0; i < n_partitions; i++) { + uint32_t count = 0; + printf("Erasing %s\n", partition_names[i]); + int fd = open(partition_names[i], O_WRONLY); + if (fd == -1) { + errx(1, "Failed to open partition"); + } + while (write(fd, &v, sizeof(v)) == sizeof(v)) { + count += sizeof(v); + } + printf("Erased %lu bytes\n", (unsigned long)count); + close(fd); + } + exit(0); +} + +#endif diff --git a/src/systemcmds/nshterm/nshterm.c b/src/systemcmds/nshterm/nshterm.c index 458bb2259..7d9484d3e 100644 --- a/src/systemcmds/nshterm/nshterm.c +++ b/src/systemcmds/nshterm/nshterm.c @@ -62,7 +62,9 @@ nshterm_main(int argc, char *argv[]) } uint8_t retries = 0; int fd = -1; - while (retries < 50) { + + /* try the first 30 seconds */ + while (retries < 300) { /* the retries are to cope with the behaviour of /dev/ttyACM0 */ /* which may not be ready immediately. */ fd = open(argv[1], O_RDWR); diff --git a/src/systemcmds/param/param.c b/src/systemcmds/param/param.c index 65f291f40..580fdc62f 100644 --- a/src/systemcmds/param/param.c +++ b/src/systemcmds/param/param.c @@ -72,7 +72,12 @@ param_main(int argc, char *argv[]) if (argc >= 3) { do_save(argv[2]); } else { - do_save(param_get_default_file()); + if (param_save_default()) { + warnx("Param export failed."); + exit(1); + } else { + exit(0); + } } } @@ -133,11 +138,8 @@ param_main(int argc, char *argv[]) static void do_save(const char* param_file_name) { - /* delete the parameter file in case it exists */ - unlink(param_file_name); - /* create the file */ - int fd = open(param_file_name, O_WRONLY | O_CREAT | O_EXCL); + int fd = open(param_file_name, O_WRONLY | O_CREAT); if (fd < 0) err(1, "opening '%s' failed", param_file_name); @@ -146,7 +148,7 @@ do_save(const char* param_file_name) close(fd); if (result < 0) { - unlink(param_file_name); + (void)unlink(param_file_name); errx(1, "error exporting to '%s'", param_file_name); } @@ -203,11 +205,38 @@ do_show_print(void *arg, param_t param) int32_t i; float f; const char *search_string = (const char*)arg; + const char *p_name = (const char*)param_name(param); /* print nothing if search string is invalid and not matching */ - if (!(arg == NULL || (!strcmp(search_string, param_name(param))))) { - /* param not found */ - return; + if (!(arg == NULL)) { + + /* start search */ + char *ss = search_string; + char *pp = p_name; + bool mismatch = false; + + /* XXX this comparison is only ok for trailing wildcards */ + while (*ss != '\0' && *pp != '\0') { + + if (*ss == *pp) { + ss++; + pp++; + } else if (*ss == '*') { + if (*(ss + 1) != '\0') { + warnx("* symbol only allowed at end of search string."); + exit(1); + } + + pp++; + } else { + /* param not found */ + return; + } + } + + /* the search string must have been consumed */ + if (!(*ss == '\0' || *ss == '*')) + return; } printf("%c %s: ", diff --git a/src/systemcmds/ramtron/module.mk b/src/systemcmds/ramtron/module.mk deleted file mode 100644 index e4eb1d143..000000000 --- a/src/systemcmds/ramtron/module.mk +++ /dev/null @@ -1,6 +0,0 @@ -# -# RAMTRON file system driver -# - -MODULE_COMMAND = ramtron -SRCS = ramtron.c diff --git a/src/systemcmds/ramtron/ramtron.c b/src/systemcmds/ramtron/ramtron.c deleted file mode 100644 index 03c713987..000000000 --- a/src/systemcmds/ramtron/ramtron.c +++ /dev/null @@ -1,279 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2013 PX4 Development Team. All rights reserved. - * Author: Lorenz Meier <lm@inf.ethz.ch> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/** - * @file ramtron.c - * - * ramtron service and utility app. - */ - -#include <nuttx/config.h> - -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <stdbool.h> -#include <unistd.h> -#include <fcntl.h> -#include <sys/mount.h> -#include <sys/ioctl.h> -#include <sys/stat.h> - -#include <nuttx/spi.h> -#include <nuttx/mtd.h> -#include <nuttx/fs/nxffs.h> -#include <nuttx/fs/ioctl.h> - -#include <arch/board/board.h> - -#include "systemlib/systemlib.h" -#include "systemlib/param/param.h" -#include "systemlib/err.h" - -__EXPORT int ramtron_main(int argc, char *argv[]); - -#ifndef CONFIG_MTD_RAMTRON - -/* create a fake command with decent message to not confuse users */ -int ramtron_main(int argc, char *argv[]) -{ - errx(1, "RAMTRON not enabled, skipping."); -} -#else - -static void ramtron_attach(void); -static void ramtron_start(void); -static void ramtron_erase(void); -static void ramtron_ioctl(unsigned operation); -static void ramtron_save(const char *name); -static void ramtron_load(const char *name); -static void ramtron_test(void); - -static bool attached = false; -static bool started = false; -static struct mtd_dev_s *ramtron_mtd; - -int ramtron_main(int argc, char *argv[]) -{ - if (argc >= 2) { - if (!strcmp(argv[1], "start")) - ramtron_start(); - - if (!strcmp(argv[1], "save_param")) - ramtron_save(argv[2]); - - if (!strcmp(argv[1], "load_param")) - ramtron_load(argv[2]); - - if (!strcmp(argv[1], "erase")) - ramtron_erase(); - - if (!strcmp(argv[1], "test")) - ramtron_test(); - - if (0) { /* these actually require a file on the filesystem... */ - - if (!strcmp(argv[1], "reformat")) - ramtron_ioctl(FIOC_REFORMAT); - - if (!strcmp(argv[1], "repack")) - ramtron_ioctl(FIOC_OPTIMIZE); - } - } - - errx(1, "expected a command, try 'start'\n\t'save_param /ramtron/parameters'\n\t'load_param /ramtron/parameters'\n\t'erase'\n"); -} - -struct mtd_dev_s *ramtron_initialize(FAR struct spi_dev_s *dev); - - -static void -ramtron_attach(void) -{ - /* find the right spi */ - struct spi_dev_s *spi = up_spiinitialize(2); - /* this resets the spi bus, set correct bus speed again */ - // xxx set in ramtron driver, leave this out -// SPI_SETFREQUENCY(spi, 4000000); - SPI_SETFREQUENCY(spi, 375000000); - SPI_SETBITS(spi, 8); - SPI_SETMODE(spi, SPIDEV_MODE3); - SPI_SELECT(spi, SPIDEV_FLASH, false); - - if (spi == NULL) - errx(1, "failed to locate spi bus"); - - /* start the MTD driver, attempt 5 times */ - for (int i = 0; i < 5; i++) { - ramtron_mtd = ramtron_initialize(spi); - if (ramtron_mtd) { - /* abort on first valid result */ - if (i > 0) { - warnx("warning: ramtron needed %d attempts to attach", i+1); - } - break; - } - } - - /* if last attempt is still unsuccessful, abort */ - if (ramtron_mtd == NULL) - errx(1, "failed to initialize ramtron driver"); - - attached = true; -} - -static void -ramtron_start(void) -{ - int ret; - - if (started) - errx(1, "ramtron already mounted"); - - if (!attached) - ramtron_attach(); - - /* start NXFFS */ - ret = nxffs_initialize(ramtron_mtd); - - if (ret < 0) - errx(1, "failed to initialize NXFFS - erase ramtron to reformat"); - - /* mount the ramtron */ - ret = mount(NULL, "/ramtron", "nxffs", 0, NULL); - - if (ret < 0) - errx(1, "failed to mount /ramtron - erase ramtron to reformat"); - - started = true; - warnx("mounted ramtron at /ramtron"); - exit(0); -} - -//extern int at24c_nuke(void); - -static void -ramtron_erase(void) -{ - if (!attached) - ramtron_attach(); - -// if (at24c_nuke()) - errx(1, "erase failed"); - - errx(0, "erase done, reboot now"); -} - -static void -ramtron_ioctl(unsigned operation) -{ - int fd; - - fd = open("/ramtron/.", 0); - - if (fd < 0) - err(1, "open /ramtron"); - - if (ioctl(fd, operation, 0) < 0) - err(1, "ioctl"); - - exit(0); -} - -static void -ramtron_save(const char *name) -{ - if (!started) - errx(1, "must be started first"); - - if (!name) - err(1, "missing argument for device name, try '/ramtron/parameters'"); - - warnx("WARNING: 'ramtron save_param' deprecated - use 'param save' instead"); - - /* delete the file in case it exists */ - unlink(name); - - /* create the file */ - int fd = open(name, O_WRONLY | O_CREAT | O_EXCL); - - if (fd < 0) - err(1, "opening '%s' failed", name); - - int result = param_export(fd, false); - close(fd); - - if (result < 0) { - unlink(name); - errx(1, "error exporting to '%s'", name); - } - - exit(0); -} - -static void -ramtron_load(const char *name) -{ - if (!started) - errx(1, "must be started first"); - - if (!name) - err(1, "missing argument for device name, try '/ramtron/parameters'"); - - warnx("WARNING: 'ramtron load_param' deprecated - use 'param load' instead"); - - int fd = open(name, O_RDONLY); - - if (fd < 0) - err(1, "open '%s'", name); - - int result = param_load(fd); - close(fd); - - if (result < 0) - errx(1, "error importing from '%s'", name); - - exit(0); -} - -//extern void at24c_test(void); - -static void -ramtron_test(void) -{ -// at24c_test(); - exit(0); -} - -#endif diff --git a/src/systemcmds/tests/module.mk b/src/systemcmds/tests/module.mk index 576caff99..6a05ac3c6 100644 --- a/src/systemcmds/tests/module.mk +++ b/src/systemcmds/tests/module.mk @@ -29,4 +29,5 @@ SRCS = test_adc.c \ test_param.c \ test_ppm_loopback.c \ test_rc.c \ - test_conv.cpp + test_conv.cpp \ + test_mount.c diff --git a/src/systemcmds/tests/test_file.c b/src/systemcmds/tests/test_file.c index 798724cf1..83d09dd5e 100644 --- a/src/systemcmds/tests/test_file.c +++ b/src/systemcmds/tests/test_file.c @@ -1,6 +1,6 @@ /**************************************************************************** * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -35,9 +35,12 @@ * @file test_file.c * * File write test. + * + * @author Lorenz Meier <lm@inf.ethz.ch> */ #include <sys/stat.h> +#include <poll.h> #include <dirent.h> #include <stdio.h> #include <stddef.h> @@ -51,6 +54,40 @@ #include "tests.h" +int check_user_abort(int fd); + +int check_user_abort(int fd) { + /* check if user wants to abort */ + char c; + + struct pollfd fds; + int ret; + fds.fd = 0; /* stdin */ + fds.events = POLLIN; + ret = poll(&fds, 1, 0); + + if (ret > 0) { + + read(0, &c, 1); + + switch (c) { + case 0x03: // ctrl-c + case 0x1b: // esc + case 'c': + case 'q': + { + warnx("Test aborted."); + fsync(fd); + close(fd); + return OK; + /* not reached */ + } + } + } + + return 1; +} + int test_file(int argc, char *argv[]) { @@ -86,7 +123,6 @@ test_file(int argc, char *argv[]) uint8_t read_buf[chunk_sizes[c] + alignments] __attribute__((aligned(64))); hrt_abstime start, end; - //perf_counter_t wperf = perf_alloc(PC_ELAPSED, "SD writes (aligned)"); int fd = open("/fs/microsd/testfile", O_TRUNC | O_WRONLY | O_CREAT); @@ -94,28 +130,25 @@ test_file(int argc, char *argv[]) start = hrt_absolute_time(); for (unsigned i = 0; i < iterations; i++) { - //perf_begin(wperf); int wret = write(fd, write_buf + a, chunk_sizes[c]); if (wret != chunk_sizes[c]) { warn("WRITE ERROR!"); if ((0x3 & (uintptr_t)(write_buf + a))) - errx(1, "memory is unaligned, align shift: %d", a); + warnx("memory is unaligned, align shift: %d", a); + return 1; } fsync(fd); - //perf_end(wperf); + + if (!check_user_abort(fd)) + return OK; } end = hrt_absolute_time(); - //warnx("%dKiB in %llu microseconds", iterations / 2, end - start); - - //perf_print_counter(wperf); - //perf_free(wperf); - close(fd); fd = open("/fs/microsd/testfile", O_RDONLY); @@ -124,7 +157,8 @@ test_file(int argc, char *argv[]) int rret = read(fd, read_buf, chunk_sizes[c]); if (rret != chunk_sizes[c]) { - errx(1, "READ ERROR!"); + warnx("READ ERROR!"); + return 1; } /* compare value */ @@ -139,9 +173,13 @@ test_file(int argc, char *argv[]) } if (!compare_ok) { - errx(1, "ABORTING FURTHER COMPARISON DUE TO ERROR"); + warnx("ABORTING FURTHER COMPARISON DUE TO ERROR"); + return 1; } + if (!check_user_abort(fd)) + return OK; + } /* @@ -152,16 +190,20 @@ test_file(int argc, char *argv[]) int ret = unlink("/fs/microsd/testfile"); fd = open("/fs/microsd/testfile", O_TRUNC | O_WRONLY | O_CREAT); - warnx("testing aligned writes - please wait.."); + warnx("testing aligned writes - please wait.. (CTRL^C to abort)"); start = hrt_absolute_time(); for (unsigned i = 0; i < iterations; i++) { int wret = write(fd, write_buf, chunk_sizes[c]); if (wret != chunk_sizes[c]) { - err(1, "WRITE ERROR!"); + warnx("WRITE ERROR!"); + return 1; } + if (!check_user_abort(fd)) + return OK; + } fsync(fd); @@ -178,7 +220,8 @@ test_file(int argc, char *argv[]) int rret = read(fd, read_buf, chunk_sizes[c]); if (rret != chunk_sizes[c]) { - err(1, "READ ERROR!"); + warnx("READ ERROR!"); + return 1; } /* compare value */ @@ -190,10 +233,14 @@ test_file(int argc, char *argv[]) align_read_ok = false; break; } + + if (!check_user_abort(fd)) + return OK; } if (!align_read_ok) { - errx(1, "ABORTING FURTHER COMPARISON DUE TO ERROR"); + warnx("ABORTING FURTHER COMPARISON DUE TO ERROR"); + return 1; } } @@ -215,7 +262,8 @@ test_file(int argc, char *argv[]) int rret = read(fd, read_buf + a, chunk_sizes[c]); if (rret != chunk_sizes[c]) { - err(1, "READ ERROR!"); + warnx("READ ERROR!"); + return 1; } for (int j = 0; j < chunk_sizes[c]; j++) { @@ -228,10 +276,14 @@ test_file(int argc, char *argv[]) if (unalign_read_err_count > 10) break; } + + if (!check_user_abort(fd)) + return OK; } if (!unalign_read_ok) { - errx(1, "ABORTING FURTHER COMPARISON DUE TO ERROR"); + warnx("ABORTING FURTHER COMPARISON DUE TO ERROR"); + return 1; } } @@ -239,9 +291,10 @@ test_file(int argc, char *argv[]) ret = unlink("/fs/microsd/testfile"); close(fd); - if (ret) - err(1, "UNLINKING FILE FAILED"); - + if (ret) { + warnx("UNLINKING FILE FAILED"); + return 1; + } } } @@ -261,75 +314,9 @@ test_file(int argc, char *argv[]) } else { /* failed opening dir */ - err(1, "FAILED LISTING MICROSD ROOT DIRECTORY"); - } - - return 0; -} -#if 0 -int -test_file(int argc, char *argv[]) -{ - const iterations = 1024; - - /* check if microSD card is mounted */ - struct stat buffer; - if (stat("/fs/microsd/", &buffer)) { - warnx("no microSD card mounted, aborting file test"); + warnx("FAILED LISTING MICROSD ROOT DIRECTORY"); return 1; } - uint8_t buf[512]; - hrt_abstime start, end; - perf_counter_t wperf = perf_alloc(PC_ELAPSED, "SD writes"); - - int fd = open("/fs/microsd/testfile", O_TRUNC | O_WRONLY | O_CREAT); - memset(buf, 0, sizeof(buf)); - - start = hrt_absolute_time(); - for (unsigned i = 0; i < iterations; i++) { - perf_begin(wperf); - write(fd, buf, sizeof(buf)); - perf_end(wperf); - } - end = hrt_absolute_time(); - - close(fd); - - unlink("/fs/microsd/testfile"); - - warnx("%dKiB in %llu microseconds", iterations / 2, end - start); - perf_print_counter(wperf); - perf_free(wperf); - - warnx("running unlink test"); - - /* ensure that common commands do not run against file count limits */ - for (unsigned i = 0; i < 64; i++) { - - warnx("unlink iteration #%u", i); - - int fd = open("/fs/microsd/testfile", O_TRUNC | O_WRONLY | O_CREAT); - if (fd < 0) - errx(1, "failed opening test file before unlink()"); - int ret = write(fd, buf, sizeof(buf)); - if (ret < 0) - errx(1, "failed writing test file before unlink()"); - close(fd); - - ret = unlink("/fs/microsd/testfile"); - if (ret != OK) - errx(1, "failed unlinking test file"); - - fd = open("/fs/microsd/testfile", O_TRUNC | O_WRONLY | O_CREAT); - if (fd < 0) - errx(1, "failed opening test file after unlink()"); - ret = write(fd, buf, sizeof(buf)); - if (ret < 0) - errx(1, "failed writing test file after unlink()"); - close(fd); - } - return 0; } -#endif diff --git a/src/systemcmds/tests/test_mount.c b/src/systemcmds/tests/test_mount.c new file mode 100644 index 000000000..44e34d9ef --- /dev/null +++ b/src/systemcmds/tests/test_mount.c @@ -0,0 +1,289 @@ +/**************************************************************************** + * + * Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file test_mount.c + * + * Device mount / unmount stress test + * + * @author Lorenz Meier <lm@inf.ethz.ch> + */ + +#include <sys/stat.h> +#include <dirent.h> +#include <stdio.h> +#include <stddef.h> +#include <unistd.h> +#include <fcntl.h> +#include <systemlib/err.h> +#include <systemlib/systemlib.h> +#include <systemlib/perf_counter.h> +#include <string.h> + +#include <drivers/drv_hrt.h> + +#include "tests.h" + +const int fsync_tries = 1; +const int abort_tries = 10; + +int +test_mount(int argc, char *argv[]) +{ + const unsigned iterations = 2000; + const unsigned alignments = 10; + + const char* cmd_filename = "/fs/microsd/mount_test_cmds.txt"; + + + /* check if microSD card is mounted */ + struct stat buffer; + if (stat("/fs/microsd/", &buffer)) { + warnx("no microSD card mounted, aborting file test"); + return 1; + } + + /* list directory */ + DIR *d; + struct dirent *dir; + d = opendir("/fs/microsd"); + if (d) { + + while ((dir = readdir(d)) != NULL) { + //printf("%s\n", dir->d_name); + } + + closedir(d); + + warnx("directory listing ok (FS mounted and readable)"); + + } else { + /* failed opening dir */ + warnx("FAILED LISTING MICROSD ROOT DIRECTORY"); + + if (stat(cmd_filename, &buffer) == OK) { + (void)unlink(cmd_filename); + } + + return 1; + } + + /* read current test status from file, write test instructions for next round */ + + /* initial values */ + int it_left_fsync = fsync_tries; + int it_left_abort = abort_tries; + + int cmd_fd; + if (stat(cmd_filename, &buffer) == OK) { + + /* command file exists, read off state */ + cmd_fd = open(cmd_filename, O_RDWR | O_NONBLOCK); + char buf[64]; + int ret = read(cmd_fd, buf, sizeof(buf)); + + if (ret > 0) { + int count = 0; + ret = sscanf(buf, "TEST: %u %u %n", &it_left_fsync, &it_left_abort, &count); + } else { + buf[0] = '\0'; + } + + if (it_left_fsync > fsync_tries) + it_left_fsync = fsync_tries; + + if (it_left_abort > abort_tries) + it_left_abort = abort_tries; + + warnx("Iterations left: #%d / #%d of %d / %d\n(%s)", it_left_fsync, it_left_abort, + fsync_tries, abort_tries, buf); + + int it_left_fsync_prev = it_left_fsync; + + /* now write again what to do next */ + if (it_left_fsync > 0) + it_left_fsync--; + + if (it_left_fsync == 0 && it_left_abort > 0) { + + it_left_abort--; + + /* announce mode switch */ + if (it_left_fsync_prev != it_left_fsync && it_left_fsync == 0) { + warnx("\n SUCCESSFULLY PASSED FSYNC'ED WRITES, CONTINUTING WITHOUT FSYNC"); + fsync(stdout); + fsync(stderr); + usleep(20000); + } + + } + + if (it_left_abort == 0) { + (void)unlink(cmd_filename); + return 0; + } + + } else { + + /* this must be the first iteration, do something */ + cmd_fd = open(cmd_filename, O_TRUNC | O_WRONLY | O_CREAT); + + warnx("First iteration of file test\n"); + } + + char buf[64]; + int wret = sprintf(buf, "TEST: %d %d ", it_left_fsync, it_left_abort); + lseek(cmd_fd, 0, SEEK_SET); + write(cmd_fd, buf, strlen(buf) + 1); + fsync(cmd_fd); + + /* perform tests for a range of chunk sizes */ + unsigned chunk_sizes[] = {32, 64, 128, 256, 512, 600, 1200}; + + for (unsigned c = 0; c < (sizeof(chunk_sizes) / sizeof(chunk_sizes[0])); c++) { + + printf("\n\n====== FILE TEST: %u bytes chunks (%s) ======\n", chunk_sizes[c], (it_left_fsync > 0) ? "FSYNC" : "NO FSYNC"); + printf("unpower the system immediately (within 0.5s) when the hash (#) sign appears\n"); + fsync(stdout); + fsync(stderr); + usleep(50000); + + for (unsigned a = 0; a < alignments; a++) { + + printf("."); + + uint8_t write_buf[chunk_sizes[c] + alignments] __attribute__((aligned(64))); + + /* fill write buffer with known values */ + for (int i = 0; i < sizeof(write_buf); i++) { + /* this will wrap, but we just need a known value with spacing */ + write_buf[i] = i+11; + } + + uint8_t read_buf[chunk_sizes[c] + alignments] __attribute__((aligned(64))); + hrt_abstime start, end; + + int fd = open("/fs/microsd/testfile", O_TRUNC | O_WRONLY | O_CREAT); + + start = hrt_absolute_time(); + for (unsigned i = 0; i < iterations; i++) { + + int wret = write(fd, write_buf + a, chunk_sizes[c]); + + if (wret != chunk_sizes[c]) { + warn("WRITE ERROR!"); + + if ((0x3 & (uintptr_t)(write_buf + a))) + warnx("memory is unaligned, align shift: %d", a); + + return 1; + + } + + if (it_left_fsync > 0) { + fsync(fd); + } else { + printf("#"); + fsync(stdout); + fsync(stderr); + } + } + + if (it_left_fsync > 0) { + printf("#"); + } + + printf("."); + fsync(stdout); + fsync(stderr); + usleep(200000); + + end = hrt_absolute_time(); + + close(fd); + fd = open("/fs/microsd/testfile", O_RDONLY); + + /* read back data for validation */ + for (unsigned i = 0; i < iterations; i++) { + int rret = read(fd, read_buf, chunk_sizes[c]); + + if (rret != chunk_sizes[c]) { + warnx("READ ERROR!"); + return 1; + } + + /* compare value */ + bool compare_ok = true; + + for (int j = 0; j < chunk_sizes[c]; j++) { + if (read_buf[j] != write_buf[j + a]) { + warnx("COMPARISON ERROR: byte %d, align shift: %d", j, a); + compare_ok = false; + break; + } + } + + if (!compare_ok) { + warnx("ABORTING FURTHER COMPARISON DUE TO ERROR"); + return 1; + } + + } + + int ret = unlink("/fs/microsd/testfile"); + close(fd); + + if (ret) { + warnx("UNLINKING FILE FAILED"); + return 1; + } + + } + } + + fsync(stdout); + fsync(stderr); + usleep(20000); + + + + /* we always reboot for the next test if we get here */ + warnx("Iteration done, rebooting.."); + fsync(stdout); + fsync(stderr); + usleep(50000); + systemreset(false); + + /* never going to get here */ + return 0; +} diff --git a/src/systemcmds/tests/tests.h b/src/systemcmds/tests/tests.h index 321e91e60..ff05cc322 100644 --- a/src/systemcmds/tests/tests.h +++ b/src/systemcmds/tests/tests.h @@ -110,6 +110,7 @@ extern int test_file(int argc, char *argv[]); extern int test_mixer(int argc, char *argv[]); extern int test_rc(int argc, char *argv[]); extern int test_conv(int argc, char *argv[]); +extern int test_mount(int argc, char *argv[]); __END_DECLS diff --git a/src/systemcmds/tests/tests_main.c b/src/systemcmds/tests/tests_main.c index 1c717d3ea..0d3dabc00 100644 --- a/src/systemcmds/tests/tests_main.c +++ b/src/systemcmds/tests/tests_main.c @@ -107,6 +107,7 @@ const struct { {"mixer", test_mixer, OPT_NOJIGTEST | OPT_NOALLTEST}, {"rc", test_rc, OPT_NOJIGTEST | OPT_NOALLTEST}, {"conv", test_conv, OPT_NOJIGTEST | OPT_NOALLTEST}, + {"mount", test_mount, OPT_NOJIGTEST | OPT_NOALLTEST}, {"help", test_help, OPT_NOALLTEST | OPT_NOHELP | OPT_NOJIGTEST}, {NULL, NULL, 0} }; |