diff options
-rw-r--r-- | makefiles/config_px4fmu-v1_default.mk | 3 | ||||
-rw-r--r-- | src/drivers/hott/comms.cpp | 92 | ||||
-rw-r--r-- | src/drivers/hott/comms.h | 46 | ||||
-rw-r--r-- | src/drivers/hott/hott_sensors/hott_sensors.cpp | 238 | ||||
-rw-r--r-- | src/drivers/hott/hott_sensors/module.mk | 42 | ||||
-rw-r--r-- | src/drivers/hott/hott_telemetry/hott_telemetry.cpp (renamed from src/drivers/hott_telemetry/hott_telemetry_main.c) | 86 | ||||
-rw-r--r-- | src/drivers/hott/hott_telemetry/module.mk (renamed from src/drivers/hott_telemetry/module.mk) | 7 | ||||
-rw-r--r-- | src/drivers/hott/messages.cpp (renamed from src/drivers/hott_telemetry/messages.c) | 152 | ||||
-rw-r--r-- | src/drivers/hott/messages.h (renamed from src/drivers/hott_telemetry/messages.h) | 107 | ||||
-rw-r--r-- | src/modules/uORB/topics/esc_status.h | 3 |
10 files changed, 650 insertions, 126 deletions
diff --git a/makefiles/config_px4fmu-v1_default.mk b/makefiles/config_px4fmu-v1_default.mk index 213eb651b..74be1cd23 100644 --- a/makefiles/config_px4fmu-v1_default.mk +++ b/makefiles/config_px4fmu-v1_default.mk @@ -27,7 +27,8 @@ MODULES += drivers/ms5611 MODULES += drivers/mb12xx MODULES += drivers/gps MODULES += drivers/hil -MODULES += drivers/hott_telemetry +MODULES += drivers/hott/hott_telemetry +MODULES += drivers/hott/hott_sensors MODULES += drivers/blinkm MODULES += drivers/mkblctrl MODULES += drivers/md25 diff --git a/src/drivers/hott/comms.cpp b/src/drivers/hott/comms.cpp new file mode 100644 index 000000000..cb8bbba37 --- /dev/null +++ b/src/drivers/hott/comms.cpp @@ -0,0 +1,92 @@ +/**************************************************************************** + * + * Copyright (c) 2013 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file comms.c + * @author Simon Wilks <sjwilks@gmail.com> + * + */ + +#include "comms.h" + +#include <fcntl.h> +#include <stdio.h> +#include <sys/ioctl.h> +#include <systemlib/err.h> +#include <termios.h> + +int +open_uart(const char *device) +{ + /* baud rate */ + static const speed_t speed = B19200; + + /* open uart */ + const int uart = open(device, O_RDWR | O_NOCTTY); + + if (uart < 0) { + err(1, "Error opening port: %s", device); + } + + /* Back up the original uart configuration to restore it after exit */ + int termios_state; + struct termios uart_config_original; + if ((termios_state = tcgetattr(uart, &uart_config_original)) < 0) { + close(uart); + err(1, "Error getting baudrate / termios config for %s: %d", device, termios_state); + } + + /* Fill the struct for the new configuration */ + struct termios uart_config; + tcgetattr(uart, &uart_config); + + /* Clear ONLCR flag (which appends a CR for every LF) */ + uart_config.c_oflag &= ~ONLCR; + + /* Set baud rate */ + if (cfsetispeed(&uart_config, speed) < 0 || cfsetospeed(&uart_config, speed) < 0) { + close(uart); + err(1, "Error setting baudrate / termios config for %s: %d (cfsetispeed, cfsetospeed)", + device, termios_state); + } + + if ((termios_state = tcsetattr(uart, TCSANOW, &uart_config)) < 0) { + close(uart); + err(1, "Error setting baudrate / termios config for %s (tcsetattr)", device); + } + + /* Activate single wire mode */ + ioctl(uart, TIOCSSINGLEWIRE, SER_SINGLEWIRE_ENABLED); + + return uart; +} diff --git a/src/drivers/hott/comms.h b/src/drivers/hott/comms.h new file mode 100644 index 000000000..f5608122f --- /dev/null +++ b/src/drivers/hott/comms.h @@ -0,0 +1,46 @@ +/**************************************************************************** + * + * Copyright (c) 2013 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file comms.h + * @author Simon Wilks <sjwilks@gmail.com> + * + */ + + +#ifndef COMMS_H_ +#define COMMS_H + +int open_uart(const char *device); + +#endif /* COMMS_H_ */ diff --git a/src/drivers/hott/hott_sensors/hott_sensors.cpp b/src/drivers/hott/hott_sensors/hott_sensors.cpp new file mode 100644 index 000000000..e322c6349 --- /dev/null +++ b/src/drivers/hott/hott_sensors/hott_sensors.cpp @@ -0,0 +1,238 @@ +/**************************************************************************** + * + * Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. + * Author: Simon Wilks <sjwilks@gmail.com> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file hott_sensors.c + * @author Simon Wilks <sjwilks@gmail.com> + * + * Graupner HoTT sensor driver implementation. + * + * Poll any sensors connected to the PX4 via the telemetry wire. + */ + +#include <fcntl.h> +#include <nuttx/config.h> +#include <poll.h> +#include <stdlib.h> +#include <stdio.h> +#include <string.h> +#include <sys/ioctl.h> +#include <unistd.h> +#include <systemlib/err.h> +#include <systemlib/systemlib.h> + +#include "../comms.h" +#include "../messages.h" + +#define DEFAULT_UART "/dev/ttyS0"; /**< USART1 */ + +/* Oddly, ERROR is not defined for C++ */ +#ifdef ERROR +# undef ERROR +#endif +static const int ERROR = -1; + +static int thread_should_exit = false; /**< Deamon exit flag */ +static int thread_running = false; /**< Deamon status flag */ +static int deamon_task; /**< Handle of deamon task / thread */ +static const char daemon_name[] = "hott_sensors"; +static const char commandline_usage[] = "usage: hott_sensors start|status|stop [-d <device>]"; + +/** + * Deamon management function. + */ +extern "C" __EXPORT int hott_sensors_main(int argc, char *argv[]); + +/** + * Mainloop of daemon. + */ +int hott_sensors_thread_main(int argc, char *argv[]); + +static int recv_data(int uart, uint8_t *buffer, size_t *size, uint8_t *id); +static int send_poll(int uart, uint8_t *buffer, size_t size); + +int +send_poll(int uart, uint8_t *buffer, size_t size) +{ + for (size_t i = 0; i < size; i++) { + write(uart, &buffer[i], sizeof(buffer[i])); + + /* Sleep before sending the next byte. */ + usleep(POST_WRITE_DELAY_IN_USECS); + } + + /* A hack the reads out what was written so the next read from the receiver doesn't get it. */ + /* TODO: Fix this!! */ + uint8_t dummy[size]; + read(uart, &dummy, size); + + return OK; +} + +int +recv_data(int uart, uint8_t *buffer, size_t *size, uint8_t *id) +{ + static const int timeout_ms = 1000; + + struct pollfd fds; + fds.fd = uart; + fds.events = POLLIN; + + // XXX should this poll be inside the while loop??? + if (poll(&fds, 1, timeout_ms) > 0) { + int i = 0; + bool stop_byte_read = false; + while (true) { + read(uart, &buffer[i], sizeof(buffer[i])); + + if (stop_byte_read) { + // XXX process checksum + *size = ++i; + return OK; + } + // XXX can some other field not have the STOP BYTE value? + if (buffer[i] == STOP_BYTE) { + *id = buffer[1]; + stop_byte_read = true; + } + i++; + } + } + return ERROR; +} + +int +hott_sensors_thread_main(int argc, char *argv[]) +{ + warnx("starting"); + + thread_running = true; + + const char *device = DEFAULT_UART; + + /* read commandline arguments */ + for (int i = 0; i < argc && argv[i]; i++) { + if (strcmp(argv[i], "-d") == 0 || strcmp(argv[i], "--device") == 0) { //device set + if (argc > i + 1) { + device = argv[i + 1]; + + } else { + thread_running = false; + errx(1, "missing parameter to -d\n%s", commandline_usage); + } + } + } + + /* enable UART, writes potentially an empty buffer, but multiplexing is disabled */ + const int uart = open_uart(device); + if (uart < 0) { + errx(1, "Failed opening HoTT UART, exiting."); + thread_running = false; + } + + init_pub_messages(); + + uint8_t buffer[MAX_MESSAGE_BUFFER_SIZE]; + size_t size = 0; + uint8_t id = 0; + while (!thread_should_exit) { + // Currently we only support a General Air Module sensor. + build_gam_request(&buffer[0], &size); + send_poll(uart, buffer, size); + + // The sensor will need a little time before it starts sending. + usleep(5000); + + recv_data(uart, &buffer[0], &size, &id); + + // Determine which moduel sent it and process accordingly. + if (id == GAM_SENSOR_ID) { + publish_gam_message(buffer); + } else { + warnx("Unknown sensor ID: %d", id); + } + } + + warnx("exiting"); + close(uart); + thread_running = false; + + return 0; +} + +/** + * Process command line arguments and start the daemon. + */ +int +hott_sensors_main(int argc, char *argv[]) +{ + if (argc < 1) { + errx(1, "missing command\n%s", commandline_usage); + } + + if (!strcmp(argv[1], "start")) { + + if (thread_running) { + warnx("deamon already running"); + exit(0); + } + + thread_should_exit = false; + deamon_task = task_spawn_cmd(daemon_name, + SCHED_DEFAULT, + SCHED_PRIORITY_MAX - 40, + 1024, + hott_sensors_thread_main, + (argv) ? (const char **)&argv[2] : (const char **)NULL); + exit(0); + } + + if (!strcmp(argv[1], "stop")) { + thread_should_exit = true; + exit(0); + } + + if (!strcmp(argv[1], "status")) { + if (thread_running) { + warnx("daemon is running"); + + } else { + warnx("daemon not started"); + } + + exit(0); + } + + errx(1, "unrecognized command\n%s", commandline_usage); +} diff --git a/src/drivers/hott/hott_sensors/module.mk b/src/drivers/hott/hott_sensors/module.mk new file mode 100644 index 000000000..b5f5762ba --- /dev/null +++ b/src/drivers/hott/hott_sensors/module.mk @@ -0,0 +1,42 @@ +############################################################################ +# +# Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name PX4 nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +# +# Graupner HoTT Sensors application. +# + +MODULE_COMMAND = hott_sensors + +SRCS = hott_sensors.cpp \ + ../messages.cpp \ + ../comms.cpp diff --git a/src/drivers/hott_telemetry/hott_telemetry_main.c b/src/drivers/hott/hott_telemetry/hott_telemetry.cpp index 4699ce5bf..042d9f816 100644 --- a/src/drivers/hott_telemetry/hott_telemetry_main.c +++ b/src/drivers/hott/hott_telemetry/hott_telemetry.cpp @@ -41,7 +41,6 @@ * The HoTT receiver polls each device at a regular interval at which point * a data packet can be returned if necessary. * - * TODO: Add support for at least the vario and GPS sensor data. */ #include <fcntl.h> @@ -50,13 +49,21 @@ #include <stdlib.h> #include <stdio.h> #include <string.h> -#include <termios.h> #include <sys/ioctl.h> #include <unistd.h> #include <systemlib/err.h> #include <systemlib/systemlib.h> -#include "messages.h" +#include "../comms.h" +#include "../messages.h" + +#define DEFAULT_UART "/dev/ttyS0"; /**< USART1 */ + +/* Oddly, ERROR is not defined for C++ */ +#ifdef ERROR +# undef ERROR +#endif +static const int ERROR = -1; static int thread_should_exit = false; /**< Deamon exit flag */ static int thread_running = false; /**< Deamon status flag */ @@ -67,7 +74,7 @@ static const char commandline_usage[] = "usage: hott_telemetry start|status|stop /** * Deamon management function. */ -__EXPORT int hott_telemetry_main(int argc, char *argv[]); +extern "C" __EXPORT int hott_telemetry_main(int argc, char *argv[]); /** * Mainloop of daemon. @@ -77,60 +84,18 @@ int hott_telemetry_thread_main(int argc, char *argv[]); static int recv_req_id(int uart, uint8_t *id); static int send_data(int uart, uint8_t *buffer, size_t size); -static int -open_uart(const char *device, struct termios *uart_config_original) -{ - /* baud rate */ - static const speed_t speed = B19200; - - /* open uart */ - const int uart = open(device, O_RDWR | O_NOCTTY); - - if (uart < 0) { - err(1, "Error opening port: %s", device); - } - - /* Back up the original uart configuration to restore it after exit */ - int termios_state; - if ((termios_state = tcgetattr(uart, uart_config_original)) < 0) { - close(uart); - err(1, "Error getting baudrate / termios config for %s: %d", device, termios_state); - } - - /* Fill the struct for the new configuration */ - struct termios uart_config; - tcgetattr(uart, &uart_config); - - /* Clear ONLCR flag (which appends a CR for every LF) */ - uart_config.c_oflag &= ~ONLCR; - - /* Set baud rate */ - if (cfsetispeed(&uart_config, speed) < 0 || cfsetospeed(&uart_config, speed) < 0) { - close(uart); - err(1, "Error setting baudrate / termios config for %s: %d (cfsetispeed, cfsetospeed)", - device, termios_state); - } - - if ((termios_state = tcsetattr(uart, TCSANOW, &uart_config)) < 0) { - close(uart); - err(1, "Error setting baudrate / termios config for %s (tcsetattr)", device); - } - - /* Activate single wire mode */ - ioctl(uart, TIOCSSINGLEWIRE, SER_SINGLEWIRE_ENABLED); - - return uart; -} - int recv_req_id(int uart, uint8_t *id) { static const int timeout_ms = 1000; // TODO make it a define - struct pollfd fds[] = { { .fd = uart, .events = POLLIN } }; uint8_t mode; + + struct pollfd fds; + fds.fd = uart; + fds.events = POLLIN; - if (poll(fds, 1, timeout_ms) > 0) { + if (poll(&fds, 1, timeout_ms) > 0) { /* Get the mode: binary or text */ read(uart, &mode, sizeof(mode)); @@ -155,7 +120,6 @@ send_data(int uart, uint8_t *buffer, size_t size) usleep(POST_READ_DELAY_IN_USECS); uint16_t checksum = 0; - for (size_t i = 0; i < size; i++) { if (i == size - 1) { /* Set the checksum: the first uint8_t is taken as the checksum. */ @@ -186,7 +150,7 @@ hott_telemetry_thread_main(int argc, char *argv[]) thread_running = true; - const char *device = "/dev/ttyS1"; /**< Default telemetry port: USART2 */ + const char *device = DEFAULT_UART; /* read commandline arguments */ for (int i = 0; i < argc && argv[i]; i++) { @@ -202,22 +166,20 @@ hott_telemetry_thread_main(int argc, char *argv[]) } /* enable UART, writes potentially an empty buffer, but multiplexing is disabled */ - struct termios uart_config_original; - const int uart = open_uart(device, &uart_config_original); - + const int uart = open_uart(device); if (uart < 0) { errx(1, "Failed opening HoTT UART, exiting."); thread_running = false; } - messages_init(); + init_sub_messages(); - uint8_t buffer[MESSAGE_BUFFER_SIZE]; + uint8_t buffer[MAX_MESSAGE_BUFFER_SIZE]; size_t size = 0; uint8_t id = 0; bool connected = true; - while (!thread_should_exit) { + // Listen for and serve poll from the receiver. if (recv_req_id(uart, &id) == OK) { if (!connected) { connected = true; @@ -228,7 +190,9 @@ hott_telemetry_thread_main(int argc, char *argv[]) case EAM_SENSOR_ID: build_eam_response(buffer, &size); break; - + case GAM_SENSOR_ID: + build_gam_response(buffer, &size); + break; case GPS_SENSOR_ID: build_gps_response(buffer, &size); break; @@ -254,7 +218,7 @@ hott_telemetry_thread_main(int argc, char *argv[]) } /** - * Process command line arguments and tart the daemon. + * Process command line arguments and start the daemon. */ int hott_telemetry_main(int argc, char *argv[]) diff --git a/src/drivers/hott_telemetry/module.mk b/src/drivers/hott/hott_telemetry/module.mk index def1d59e9..b19cbd14c 100644 --- a/src/drivers/hott_telemetry/module.mk +++ b/src/drivers/hott/hott_telemetry/module.mk @@ -32,10 +32,11 @@ ############################################################################ # -# Graupner HoTT Telemetry application. +# Graupner HoTT Telemetry applications. # MODULE_COMMAND = hott_telemetry -SRCS = hott_telemetry_main.c \ - messages.c +SRCS = hott_telemetry.cpp \ + ../messages.cpp \ + ../comms.cpp diff --git a/src/drivers/hott_telemetry/messages.c b/src/drivers/hott/messages.cpp index 0ce56acef..57c256339 100644 --- a/src/drivers/hott_telemetry/messages.c +++ b/src/drivers/hott/messages.cpp @@ -46,6 +46,7 @@ #include <unistd.h> #include <uORB/topics/airspeed.h> #include <uORB/topics/battery_status.h> +#include <uORB/topics/esc_status.h> #include <uORB/topics/home_position.h> #include <uORB/topics/sensor_combined.h> #include <uORB/topics/vehicle_gps_position.h> @@ -53,24 +54,75 @@ /* The board is very roughly 5 deg warmer than the surrounding air */ #define BOARD_TEMP_OFFSET_DEG 5 -static int battery_sub = -1; -static int gps_sub = -1; -static int home_sub = -1; -static int sensor_sub = -1; -static int airspeed_sub = -1; +static int _battery_sub = -1; +static int _gps_sub = -1; +static int _home_sub = -1; +static int _sensor_sub = -1; +static int _airspeed_sub = -1; +static int _esc_sub = -1; -static bool home_position_set = false; -static double home_lat = 0.0d; -static double home_lon = 0.0d; +static orb_advert_t _esc_pub; +struct esc_status_s _esc; + +static bool _home_position_set = false; +static double _home_lat = 0.0d; +static double _home_lon = 0.0d; void -messages_init(void) +init_sub_messages(void) { - battery_sub = orb_subscribe(ORB_ID(battery_status)); - gps_sub = orb_subscribe(ORB_ID(vehicle_gps_position)); - home_sub = orb_subscribe(ORB_ID(home_position)); - sensor_sub = orb_subscribe(ORB_ID(sensor_combined)); - airspeed_sub = orb_subscribe(ORB_ID(airspeed)); + _battery_sub = orb_subscribe(ORB_ID(battery_status)); + _gps_sub = orb_subscribe(ORB_ID(vehicle_gps_position)); + _home_sub = orb_subscribe(ORB_ID(home_position)); + _sensor_sub = orb_subscribe(ORB_ID(sensor_combined)); + _airspeed_sub = orb_subscribe(ORB_ID(airspeed)); + _esc_sub = orb_subscribe(ORB_ID(esc_status)); +} + +void +init_pub_messages(void) +{ + memset(&_esc, 0, sizeof(_esc)); + _esc_pub = orb_advertise(ORB_ID(esc_status), &_esc); +} + +void +build_gam_request(uint8_t *buffer, size_t *size) +{ + struct gam_module_poll_msg msg; + *size = sizeof(msg); + memset(&msg, 0, *size); + + msg.mode = BINARY_MODE_REQUEST_ID; + msg.id = GAM_SENSOR_ID; + + memcpy(buffer, &msg, *size); +} + +void +publish_gam_message(const uint8_t *buffer) +{ + struct gam_module_msg msg; + size_t size = sizeof(msg); + memset(&msg, 0, size); + memcpy(&msg, buffer, size); + + /* announce the esc if needed, just publish else */ + if (_esc_pub > 0) { + orb_publish(ORB_ID(esc_status), _esc_pub, &_esc); + } else { + _esc_pub = orb_advertise(ORB_ID(esc_status), &_esc); + } + + // Publish it. + _esc.esc_count = 1; + _esc.esc_connectiontype = ESC_CONNECTION_TYPE_PPM; + + _esc.esc[0].esc_vendor = ESC_VENDOR_GRAUPNER_HOTT; + _esc.esc[0].esc_rpm = (uint16_t)((msg.rpm_H << 8) | (msg.rpm_L & 0xff)) * 10; + _esc.esc[0].esc_temperature = msg.temperature1 - 20; + _esc.esc[0].esc_voltage = (uint16_t)((msg.main_voltage_H << 8) | (msg.main_voltage_L & 0xff)); + _esc.esc[0].esc_current = (uint16_t)((msg.current_H << 8) | (msg.current_L & 0xff)); } void @@ -79,12 +131,12 @@ build_eam_response(uint8_t *buffer, size_t *size) /* get a local copy of the current sensor values */ struct sensor_combined_s raw; memset(&raw, 0, sizeof(raw)); - orb_copy(ORB_ID(sensor_combined), sensor_sub, &raw); + orb_copy(ORB_ID(sensor_combined), _sensor_sub, &raw); /* get a local copy of the battery data */ struct battery_status_s battery; memset(&battery, 0, sizeof(battery)); - orb_copy(ORB_ID(battery_status), battery_sub, &battery); + orb_copy(ORB_ID(battery_status), _battery_sub, &battery); struct eam_module_msg msg; *size = sizeof(msg); @@ -92,7 +144,7 @@ build_eam_response(uint8_t *buffer, size_t *size) msg.start = START_BYTE; msg.eam_sensor_id = EAM_SENSOR_ID; - msg.sensor_id = EAM_SENSOR_TEXT_ID; + msg.sensor_text_id = EAM_SENSOR_TEXT_ID; msg.temperature1 = (uint8_t)(raw.baro_temp_celcius + 20); msg.temperature2 = msg.temperature1 - BOARD_TEMP_OFFSET_DEG; @@ -106,12 +158,46 @@ build_eam_response(uint8_t *buffer, size_t *size) /* get a local copy of the airspeed data */ struct airspeed_s airspeed; memset(&airspeed, 0, sizeof(airspeed)); - orb_copy(ORB_ID(airspeed), airspeed_sub, &airspeed); + orb_copy(ORB_ID(airspeed), _airspeed_sub, &airspeed); uint16_t speed = (uint16_t)(airspeed.indicated_airspeed_m_s * 3.6f); msg.speed_L = (uint8_t)speed & 0xff; msg.speed_H = (uint8_t)(speed >> 8) & 0xff; - + + msg.stop = STOP_BYTE; + memcpy(buffer, &msg, *size); +} + +void +build_gam_response(uint8_t *buffer, size_t *size) +{ + /* get a local copy of the ESC Status values */ + struct esc_status_s esc; + memset(&esc, 0, sizeof(esc)); + orb_copy(ORB_ID(esc_status), _esc_sub, &esc); + + struct gam_module_msg msg; + *size = sizeof(msg); + memset(&msg, 0, *size); + + msg.start = START_BYTE; + msg.gam_sensor_id = GAM_SENSOR_ID; + msg.sensor_text_id = GAM_SENSOR_TEXT_ID; + + msg.temperature1 = (uint8_t)(esc.esc[0].esc_temperature + 20); + msg.temperature2 = 20; // 0 deg. C. + + uint16_t voltage = (uint16_t)(esc.esc[0].esc_voltage); + msg.main_voltage_L = (uint8_t)voltage & 0xff; + msg.main_voltage_H = (uint8_t)(voltage >> 8) & 0xff; + + uint16_t current = (uint16_t)(esc.esc[0].esc_current); + msg.current_L = (uint8_t)current & 0xff; + msg.current_H = (uint8_t)(current >> 8) & 0xff; + + uint16_t rpm = (uint16_t)(esc.esc[0].esc_rpm * 0.1f); + msg.rpm_L = (uint8_t)rpm & 0xff; + msg.rpm_H = (uint8_t)(rpm >> 8) & 0xff; msg.stop = STOP_BYTE; memcpy(buffer, &msg, *size); @@ -123,14 +209,14 @@ build_gps_response(uint8_t *buffer, size_t *size) /* get a local copy of the current sensor values */ struct sensor_combined_s raw; memset(&raw, 0, sizeof(raw)); - orb_copy(ORB_ID(sensor_combined), sensor_sub, &raw); + orb_copy(ORB_ID(sensor_combined), _sensor_sub, &raw); /* get a local copy of the battery data */ struct vehicle_gps_position_s gps; memset(&gps, 0, sizeof(gps)); - orb_copy(ORB_ID(vehicle_gps_position), gps_sub, &gps); + orb_copy(ORB_ID(vehicle_gps_position), _gps_sub, &gps); - struct gps_module_msg msg = { 0 }; + struct gps_module_msg msg; *size = sizeof(msg); memset(&msg, 0, *size); @@ -150,7 +236,7 @@ build_gps_response(uint8_t *buffer, size_t *size) msg.flight_direction = (uint8_t)(gps.cog_rad * M_RAD_TO_DEG_F); /* GPS speed */ - uint16_t speed = (uint16_t)(gps.vel_m_s * 3.6); + uint16_t speed = (uint16_t)(gps.vel_m_s * 3.6f); msg.gps_speed_L = (uint8_t)speed & 0xff; msg.gps_speed_H = (uint8_t)(speed >> 8) & 0xff; @@ -196,33 +282,33 @@ build_gps_response(uint8_t *buffer, size_t *size) msg.longitude_sec_H = (uint8_t)(lon_sec >> 8) & 0xff; /* Altitude */ - uint16_t alt = (uint16_t)(gps.alt*1e-3 + 500.0f); + uint16_t alt = (uint16_t)(gps.alt*1e-3f + 500.0f); msg.altitude_L = (uint8_t)alt & 0xff; msg.altitude_H = (uint8_t)(alt >> 8) & 0xff; - /* Get any (and probably only ever one) home_sub postion report */ + /* Get any (and probably only ever one) _home_sub postion report */ bool updated; - orb_check(home_sub, &updated); + orb_check(_home_sub, &updated); if (updated) { /* get a local copy of the home position data */ struct home_position_s home; memset(&home, 0, sizeof(home)); - orb_copy(ORB_ID(home_position), home_sub, &home); + orb_copy(ORB_ID(home_position), _home_sub, &home); - home_lat = ((double)(home.lat))*1e-7d; - home_lon = ((double)(home.lon))*1e-7d; - home_position_set = true; + _home_lat = ((double)(home.lat))*1e-7d; + _home_lon = ((double)(home.lon))*1e-7d; + _home_position_set = true; } /* Distance from home */ - if (home_position_set) { - uint16_t dist = (uint16_t)get_distance_to_next_waypoint(home_lat, home_lon, lat, lon); + if (_home_position_set) { + uint16_t dist = (uint16_t)get_distance_to_next_waypoint(_home_lat, _home_lon, lat, lon); msg.distance_L = (uint8_t)dist & 0xff; msg.distance_H = (uint8_t)(dist >> 8) & 0xff; /* Direction back to home */ - uint16_t bearing = (uint16_t)(get_bearing_to_next_waypoint(home_lat, home_lon, lat, lon) * M_RAD_TO_DEG_F); + uint16_t bearing = (uint16_t)(get_bearing_to_next_waypoint(_home_lat, _home_lon, lat, lon) * M_RAD_TO_DEG_F); msg.home_direction = (uint8_t)bearing >> 1; } } diff --git a/src/drivers/hott_telemetry/messages.h b/src/drivers/hott/messages.h index e6d5cc723..451bee91c 100644 --- a/src/drivers/hott_telemetry/messages.h +++ b/src/drivers/hott/messages.h @@ -60,19 +60,25 @@ #define STOP_BYTE 0x7d #define TEMP_ZERO_CELSIUS 0x14 +/* The GAM Module poll message. */ +struct gam_module_poll_msg { + uint8_t mode; + uint8_t id; +}; + /* Electric Air Module (EAM) constants. */ #define EAM_SENSOR_ID 0x8e #define EAM_SENSOR_TEXT_ID 0xe0 /* The Electric Air Module message. */ struct eam_module_msg { - uint8_t start; /**< Start byte */ + uint8_t start; /**< Start byte */ uint8_t eam_sensor_id; /**< EAM sensor */ uint8_t warning; - uint8_t sensor_id; /**< Sensor ID, why different? */ + uint8_t sensor_text_id; uint8_t alarm_inverse1; uint8_t alarm_inverse2; - uint8_t cell1_L; /**< Lipo cell voltages. Not supported. */ + uint8_t cell1_L; /**< Lipo cell voltages. Not supported. */ uint8_t cell2_L; uint8_t cell3_L; uint8_t cell4_L; @@ -92,9 +98,9 @@ struct eam_module_msg { uint8_t batt2_voltage_H; uint8_t temperature1; /**< Temperature sensor 1. 20 = 0 degrees */ uint8_t temperature2; - uint8_t altitude_L; /**< Attitude (meters) lower 8-bits. 500 = 0 meters */ + uint8_t altitude_L; /**< Attitude (meters) lower 8-bits. 500 = 0 meters */ uint8_t altitude_H; - uint8_t current_L; /**< Current (mAh) lower 8-bits in steps of 0.1V */ + uint8_t current_L; /**< Current (mAh) lower 8-bits in steps of 0.1V */ uint8_t current_H; uint8_t main_voltage_L; /**< Main power voltage lower 8-bits in steps of 0.1V */ uint8_t main_voltage_H; @@ -103,35 +109,82 @@ struct eam_module_msg { uint8_t climbrate_L; /**< Climb rate in 0.01m/s. 0m/s = 30000 */ uint8_t climbrate_H; uint8_t climbrate_3s; /**< Climb rate in m/3sec. 0m/3sec = 120 */ - uint8_t rpm_L; /**< RPM Lower 8-bits In steps of 10 U/min */ + uint8_t rpm_L; /**< RPM Lower 8-bits In steps of 10 U/min */ uint8_t rpm_H; uint8_t electric_min; /**< Flight time in minutes. */ uint8_t electric_sec; /**< Flight time in seconds. */ - uint8_t speed_L; /**< Airspeed in km/h in steps of 1 km/h */ + uint8_t speed_L; /**< Airspeed in km/h in steps of 1 km/h */ uint8_t speed_H; - uint8_t stop; /**< Stop byte */ - uint8_t checksum; /**< Lower 8-bits of all bytes summed. */ + uint8_t stop; /**< Stop byte */ + uint8_t checksum; /**< Lower 8-bits of all bytes summed. */ }; -/** - * The maximum buffer size required to store a HoTT message. - */ -#define MESSAGE_BUFFER_SIZE sizeof(union { \ - struct eam_module_msg eam; \ -}) + +/* General Air Module (GAM) constants. */ +#define GAM_SENSOR_ID 0x8d +#define GAM_SENSOR_TEXT_ID 0xd0 + +struct gam_module_msg { + uint8_t start; // start byte constant value 0x7c + uint8_t gam_sensor_id; // EAM sensort id. constat value 0x8d + uint8_t warning_beeps; // 1=A 2=B ... 0x1a=Z 0 = no alarm + uint8_t sensor_text_id; // constant value 0xd0 + uint8_t alarm_invers1; // alarm bitmask. Value is displayed inverted + uint8_t alarm_invers2; // alarm bitmask. Value is displayed inverted + uint8_t cell1; // cell 1 voltage lower value. 0.02V steps, 124=2.48V + uint8_t cell2; + uint8_t cell3; + uint8_t cell4; + uint8_t cell5; + uint8_t cell6; + uint8_t batt1_L; // battery 1 voltage LSB value. 0.1V steps. 50 = 5.5V + uint8_t batt1_H; + uint8_t batt2_L; // battery 2 voltage LSB value. 0.1V steps. 50 = 5.5V + uint8_t batt2_H; + uint8_t temperature1; // temperature 1. offset of 20. a value of 20 = 0°C + uint8_t temperature2; // temperature 2. offset of 20. a value of 20 = 0°C + uint8_t fuel_procent; // Fuel capacity in %. Values 0--100 + // graphical display ranges: 0-25% 50% 75% 100% + uint8_t fuel_ml_L; // Fuel in ml scale. Full = 65535! + uint8_t fuel_ml_H; // + uint8_t rpm_L; // RPM in 10 RPM steps. 300 = 3000rpm + uint8_t rpm_H; // + uint8_t altitude_L; // altitude in meters. offset of 500, 500 = 0m + uint8_t altitude_H; // + uint8_t climbrate_L; // climb rate in 0.01m/s. Value of 30000 = 0.00 m/s + uint8_t climbrate_H; // + uint8_t climbrate3s; // climb rate in m/3sec. Value of 120 = 0m/3sec + uint8_t current_L; // current in 0.1A steps + uint8_t current_H; // + uint8_t main_voltage_L; // Main power voltage using 0.1V steps + uint8_t main_voltage_H; // + uint8_t batt_cap_L; // used battery capacity in 10mAh steps + uint8_t batt_cap_H; // + uint8_t speed_L; // (air?) speed in km/h(?) we are using ground speed here per default + uint8_t speed_H; // + uint8_t min_cell_volt; // minimum cell voltage in 2mV steps. 124 = 2,48V + uint8_t min_cell_volt_num; // number of the cell with the lowest voltage + uint8_t rpm2_L; // RPM in 10 RPM steps. 300 = 3000rpm + uint8_t rpm2_H; // + uint8_t general_error_number; // Voice error == 12. TODO: more docu + uint8_t pressure; // Pressure up to 16bar. 0,1bar scale. 20 = 2bar + uint8_t version; // version number TODO: more info? + uint8_t stop; // stop byte + uint8_t checksum; // checksum +}; /* GPS sensor constants. */ -#define GPS_SENSOR_ID 0x8A -#define GPS_SENSOR_TEXT_ID 0xA0 +#define GPS_SENSOR_ID 0x8a +#define GPS_SENSOR_TEXT_ID 0xa0 /** * The GPS sensor message * Struct based on: https://code.google.com/p/diy-hott-gps/downloads */ struct gps_module_msg { - uint8_t start; /**< Start byte */ - uint8_t sensor_id; /**< GPS sensor ID*/ - uint8_t warning; /**< Byte 3: 0…= warning beeps */ + uint8_t start; /**< Start byte */ + uint8_t sensor_id; /**< GPS sensor ID*/ + uint8_t warning; /**< Byte 3: 0…= warning beeps */ uint8_t sensor_text_id; /**< GPS Sensor text mode ID */ uint8_t alarm_inverse1; /**< Byte 5: 01 inverse status */ uint8_t alarm_inverse2; /**< Byte 6: 00 inverse status status 1 = no GPS Signal */ @@ -179,15 +232,15 @@ struct gps_module_msg { uint8_t checksum; /**< Byte 45: Parity Byte */ }; -/** - * The maximum buffer size required to store a HoTT message. - */ -#define GPS_MESSAGE_BUFFER_SIZE sizeof(union { \ - struct gps_module_msg gps; \ -}) +// The maximum size of a message. +#define MAX_MESSAGE_BUFFER_SIZE 45 -void messages_init(void); +void init_sub_messages(void); +void init_pub_messages(void); +void build_gam_request(uint8_t *buffer, size_t *size); +void publish_gam_message(const uint8_t *buffer); void build_eam_response(uint8_t *buffer, size_t *size); +void build_gam_response(uint8_t *buffer, size_t *size); void build_gps_response(uint8_t *buffer, size_t *size); float _get_distance_to_next_waypoint(double lat_now, double lon_now, double lat_next, double lon_next); void convert_to_degrees_minutes_seconds(double lat, int *deg, int *min, int *sec); diff --git a/src/modules/uORB/topics/esc_status.h b/src/modules/uORB/topics/esc_status.h index e67a39e1e..00cf59b28 100644 --- a/src/modules/uORB/topics/esc_status.h +++ b/src/modules/uORB/topics/esc_status.h @@ -63,7 +63,8 @@ enum ESC_VENDOR { ESC_VENDOR_GENERIC = 0, /**< generic ESC */ - ESC_VENDOR_MIKROKOPTER /**< Mikrokopter */ + ESC_VENDOR_MIKROKOPTER, /**< Mikrokopter */ + ESC_VENDOR_GRAUPNER_HOTT /**< Graupner HoTT ESC */ }; enum ESC_CONNECTION_TYPE { |