diff options
-rw-r--r-- | ROMFS/px4fmu_common/init.d/1000_rc_fw_easystar.hil | 58 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/1002_rc_fw_state.hil | 56 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/1004_rc_fw_Rascal110.hil | 1 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/12001_octo_cox_pwm | 37 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/2101_hk_bixler | 48 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/2102_3dr_skywalker | 48 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/3030_io_camflyer | 84 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/3032_skywalker_x5 | 33 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/5001_quad_+_pwm | 37 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/6001_hexa_x_pwm | 37 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/7001_hexa_+_pwm | 37 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/8001_octo_x_pwm | 37 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/9001_octo_+_pwm | 37 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/cmp_test | 9 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/rc.autostart | 94 |
15 files changed, 386 insertions, 267 deletions
diff --git a/ROMFS/px4fmu_common/init.d/1000_rc_fw_easystar.hil b/ROMFS/px4fmu_common/init.d/1000_rc_fw_easystar.hil index 40a13b5d1..ebe8a1a1e 100644 --- a/ROMFS/px4fmu_common/init.d/1000_rc_fw_easystar.hil +++ b/ROMFS/px4fmu_common/init.d/1000_rc_fw_easystar.hil @@ -1,14 +1,13 @@ #!nsh # -# USB HIL start +# HILStar / X-Plane +# +# Maintainers: Thomas Gubler <thomasgubler@gmail.com> # -echo "[HIL] HILStar starting.." +echo "HIL Rascal 110 starting.." -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 +if [ $DO_AUTOCONFIG == yes ] then # Set all params here, then disable autoconfig @@ -40,48 +39,7 @@ then param save fi -# Allow USB some time to come up -sleep 1 -# Tell MAVLink that this link is "fast" -mavlink start -b 230400 -d /dev/ttyACM0 - -# Create a fake HIL /dev/pwm_output interface -hil mode_pwm - -# -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor -# see https://pixhawk.ethz.ch/mavlink/ -# -param set MAV_TYPE 1 - -# -# Check if we got an IO -# -if px4io start -then - echo "IO started" -else - fmu mode_serial - echo "FMU started" -fi - -# -# Start the sensors (depends on orb, px4io) -# -sh /etc/init.d/rc.sensors - -# -# Start the attitude estimator (depends on orb) -# -att_pos_estimator_ekf start - -# -# Load mixer and start controllers (depends on px4io) -# -mixer load /dev/pwm_output /etc/mixers/FMU_AET.mix -fw_pos_control_l1 start -fw_att_control start - -echo "[HIL] setup done, running" +set HIL yes +set VEHICLE_TYPE fw +set MIXER FMU_AERT diff --git a/ROMFS/px4fmu_common/init.d/1002_rc_fw_state.hil b/ROMFS/px4fmu_common/init.d/1002_rc_fw_state.hil index 7b9f41bf6..46da24d35 100644 --- a/ROMFS/px4fmu_common/init.d/1002_rc_fw_state.hil +++ b/ROMFS/px4fmu_common/init.d/1002_rc_fw_state.hil @@ -1,14 +1,13 @@ #!nsh # -# USB HIL start +# HIL Rascal 110 (Flightgear) +# +# Maintainers: Thomas Gubler <thomasgubler@gmail.com> # -echo "[HIL] HILStar starting in state-HIL mode.." +echo "HIL Rascal 110 starting.." -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 +if [ $DO_AUTOCONFIG == yes ] then # Set all params here, then disable autoconfig @@ -32,48 +31,15 @@ then param set FW_T_SINK_MAX 5.0 param set FW_T_SINK_MIN 4.0 param set FW_Y_ROLLFF 1.1 + param set FW_L1_PERIOD 16 + param set RC_SCALE_ROLL 1.0 + param set RC_SCALE_PITCH 1.0 param set SYS_AUTOCONFIG 0 param save fi -# Allow USB some time to come up -sleep 1 -# Tell MAVLink that this link is "fast" -mavlink start -b 230400 -d /dev/ttyACM0 - -# Create a fake HIL /dev/pwm_output interface -hil mode_pwm - -# -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor -# see https://pixhawk.ethz.ch/mavlink/ -# -param set MAV_TYPE 1 - -# -# Check if we got an IO -# -if px4io start -then - echo "IO started" -else - fmu mode_serial - echo "FMU started" -fi - -# -# Start the sensors (depends on orb, px4io) -# -sh /etc/init.d/rc.sensors - -# -# Load mixer and start controllers (depends on px4io) -# -mixer load /dev/pwm_output /etc/mixers/FMU_AET.mix -fw_pos_control_l1 start -fw_att_control start - -echo "[HIL] setup done, running" +set HIL yes +set VEHICLE_TYPE fw +set MIXER FMU_AERT diff --git a/ROMFS/px4fmu_common/init.d/1004_rc_fw_Rascal110.hil b/ROMFS/px4fmu_common/init.d/1004_rc_fw_Rascal110.hil index 75a00a675..46da24d35 100644 --- a/ROMFS/px4fmu_common/init.d/1004_rc_fw_Rascal110.hil +++ b/ROMFS/px4fmu_common/init.d/1004_rc_fw_Rascal110.hil @@ -43,4 +43,3 @@ set HIL yes set VEHICLE_TYPE fw set MIXER FMU_AERT - diff --git a/ROMFS/px4fmu_common/init.d/12001_octo_cox_pwm b/ROMFS/px4fmu_common/init.d/12001_octo_cox_pwm new file mode 100644 index 000000000..5f3cec4e0 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/12001_octo_cox_pwm @@ -0,0 +1,37 @@ +#!nsh +# +# Generic 10” Octo coaxial geometry +# +# Maintainers: Lorenz Meier <lm@inf.ethz.ch> +# + +if [ $DO_AUTOCONFIG == yes ] +then + # + # Default parameters for this platform + # + param set MC_ATT_P 7.0 + param set MC_ATT_I 0.0 + param set MC_ATT_D 0.0 + param set MC_ATTRATE_P 0.12 + param set MC_ATTRATE_I 0.0 + param set MC_ATTRATE_D 0.004 + param set MC_YAWPOS_P 2.0 + param set MC_YAWPOS_I 0.0 + param set MC_YAWPOS_D 0.0 + param set MC_YAWRATE_P 0.3 + param set MC_YAWRATE_I 0.2 + param set MC_YAWRATE_D 0.005 + + # TODO add default MPC parameters +fi + +set VEHICLE_TYPE mc +set MIXER FMU_octo_cox + +set PWM_OUTPUTS 1234 +set PWM_RATE 400 +# DJI ESC range +set PWM_DISARMED 900 +set PWM_MIN 1200 +set PWM_MAX 1900 diff --git a/ROMFS/px4fmu_common/init.d/2101_hk_bixler b/ROMFS/px4fmu_common/init.d/2101_hk_bixler index 995d3ba07..1ed923b19 100644 --- a/ROMFS/px4fmu_common/init.d/2101_hk_bixler +++ b/ROMFS/px4fmu_common/init.d/2101_hk_bixler @@ -1,11 +1,11 @@ #!nsh -echo "[init] PX4FMU v1, v2 with or without IO on HK Bixler" +echo "[init] PX4FMU v1, v2 with or without IO on 3DR SkyWalker" # # Load default params for this platform # -if param compare SYS_AUTOCONFIG 1 +if [ $DO_AUTOCONFIG == yes ] then # Set all params here, then disable autoconfig param set FW_P_D 0 @@ -35,46 +35,6 @@ then param set SYS_AUTOCONFIG 0 param save fi - -# -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing -# -param set MAV_TYPE 1 - -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - - sh /etc/init.d/rc.io - # Limit to 100 Hz updates and (implicit) 50 Hz PWM - px4io limit 100 -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - - fmu mode_pwm - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi - -# -# Load mixer and start controllers (depends on px4io) -# -if [ -f /fs/microsd/etc/mixers/FMU_AERT.mix ] -then - echo "Using /fs/microsd/etc/mixers/FMU_AERT.mix" - mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_AERT.mix -else - echo "Using /etc/mixers/FMU_Q.mix" - mixer load /dev/pwm_output /etc/mixers/FMU_AERT.mix -fi -# -# Start common fixedwing apps -# -sh /etc/init.d/rc.fixedwing +set VEHICLE_TYPE fw +set MIXER FMU_AERT
\ No newline at end of file diff --git a/ROMFS/px4fmu_common/init.d/2102_3dr_skywalker b/ROMFS/px4fmu_common/init.d/2102_3dr_skywalker index a6d2ace96..1ed923b19 100644 --- a/ROMFS/px4fmu_common/init.d/2102_3dr_skywalker +++ b/ROMFS/px4fmu_common/init.d/2102_3dr_skywalker @@ -5,7 +5,7 @@ echo "[init] PX4FMU v1, v2 with or without IO on 3DR SkyWalker" # # Load default params for this platform # -if param compare SYS_AUTOCONFIG 1 +if [ $DO_AUTOCONFIG == yes ] then # Set all params here, then disable autoconfig param set FW_P_D 0 @@ -35,48 +35,6 @@ then param set SYS_AUTOCONFIG 0 param save fi - -# -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing -# -param set MAV_TYPE 1 - -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - - sh /etc/init.d/rc.io - # Limit to 100 Hz updates and (implicit) 50 Hz PWM - px4io limit 100 -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - - fmu mode_pwm - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi -pwm disarmed -c 3 -p 1056 - -# -# Load mixer and start controllers (depends on px4io) -# -if [ -f /fs/microsd/etc/mixers/FMU_AERT.mix ] -then - echo "Using /fs/microsd/etc/mixers/FMU_AERT.mix" - mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_AETR.mix -else - echo "Using /etc/mixers/FMU_Q.mix" - mixer load /dev/pwm_output /etc/mixers/FMU_AETR.mix -fi - -# -# Start common fixedwing apps -# -sh /etc/init.d/rc.fixedwing +set VEHICLE_TYPE fw +set MIXER FMU_AERT
\ No newline at end of file diff --git a/ROMFS/px4fmu_common/init.d/3030_io_camflyer b/ROMFS/px4fmu_common/init.d/3030_io_camflyer index 65f01c974..cbcc6189b 100644 --- a/ROMFS/px4fmu_common/init.d/3030_io_camflyer +++ b/ROMFS/px4fmu_common/init.d/3030_io_camflyer @@ -2,57 +2,39 @@ echo "[init] PX4FMU v1, v2 with or without IO on Camflyer" -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 +if [ $DO_AUTOCONFIG == yes ] then - # Set all params here, then disable autoconfig - # TODO - - param set SYS_AUTOCONFIG 0 - param save + # + # Default parameters for this platform + # + param set FW_AIRSPD_MIN 7 + param set FW_AIRSPD_TRIM 9 + param set FW_AIRSPD_MAX 14 + param set FW_L1_PERIOD 10 + param set FW_P_D 0 + param set FW_P_I 0 + param set FW_P_IMAX 20 + param set FW_P_LIM_MAX 30 + param set FW_P_LIM_MIN -20 + param set FW_P_P 30 + param set FW_P_RMAX_NEG 0 + param set FW_P_RMAX_POS 0 + param set FW_P_ROLLFF 2 + param set FW_R_D 0 + param set FW_R_I 5 + param set FW_R_IMAX 20 + param set FW_R_P 60 + param set FW_R_RMAX 60 + param set FW_THR_CRUISE 0.65 + param set FW_THR_MAX 0.7 + param set FW_THR_MIN 0 + param set FW_T_SINK_MAX 5 + param set FW_T_SINK_MIN 2 + param set FW_T_TIME_CONST 9 + param set FW_Y_ROLLFF 2.0 + param set RC_SCALE_ROLL 1.0 + param set RC_SCALE_PITCH 1.0 fi - -# -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing -# -param set MAV_TYPE 1 -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - - sh /etc/init.d/rc.io - # Limit to 100 Hz updates and (implicit) 50 Hz PWM - px4io limit 100 -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - - fmu mode_pwm - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi - -# -# Load mixer and start controllers (depends on px4io) -# -if [ -f /fs/microsd/etc/mixers/FMU_Q.mix ] -then - echo "Using /fs/microsd/etc/mixers/FMU_Q.mix" - mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_Q.mix -else - echo "Using /etc/mixers/FMU_Q.mix" - mixer load /dev/pwm_output /etc/mixers/FMU_Q.mix -fi - -# -# Start common fixedwing apps -# -sh /etc/init.d/rc.fixedwing +set VEHICLE_TYPE fw +set MIXER FMU_Q diff --git a/ROMFS/px4fmu_common/init.d/3032_skywalker_x5 b/ROMFS/px4fmu_common/init.d/3032_skywalker_x5 index 03f282237..143310af9 100644 --- a/ROMFS/px4fmu_common/init.d/3032_skywalker_x5 +++ b/ROMFS/px4fmu_common/init.d/3032_skywalker_x5 @@ -7,8 +7,37 @@ if [ $DO_AUTOCONFIG == yes ] then - # TODO + # + # Default parameters for this platform + # + param set FW_AIRSPD_MIN 7 + param set FW_AIRSPD_TRIM 9 + param set FW_AIRSPD_MAX 14 + param set FW_L1_PERIOD 10 + param set FW_P_D 0 + param set FW_P_I 0 + param set FW_P_IMAX 20 + param set FW_P_LIM_MAX 30 + param set FW_P_LIM_MIN -20 + param set FW_P_P 30 + param set FW_P_RMAX_NEG 0 + param set FW_P_RMAX_POS 0 + param set FW_P_ROLLFF 2 + param set FW_R_D 0 + param set FW_R_I 5 + param set FW_R_IMAX 20 + param set FW_R_P 60 + param set FW_R_RMAX 60 + param set FW_THR_CRUISE 0.65 + param set FW_THR_MAX 0.7 + param set FW_THR_MIN 0 + param set FW_T_SINK_MAX 5 + param set FW_T_SINK_MIN 2 + param set FW_T_TIME_CONST 9 + param set FW_Y_ROLLFF 2.0 + param set RC_SCALE_ROLL 1.0 + param set RC_SCALE_PITCH 1.0 fi set VEHICLE_TYPE fw -set MIXER FMU_Q +set MIXER FMU_X5 diff --git a/ROMFS/px4fmu_common/init.d/5001_quad_+_pwm b/ROMFS/px4fmu_common/init.d/5001_quad_+_pwm new file mode 100644 index 000000000..2e5f6ca4f --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/5001_quad_+_pwm @@ -0,0 +1,37 @@ +#!nsh +# +# Generic 10” Quad + geometry +# +# Maintainers: Lorenz Meier <lm@inf.ethz.ch> +# + +if [ $DO_AUTOCONFIG == yes ] +then + # + # Default parameters for this platform + # + param set MC_ATT_P 7.0 + param set MC_ATT_I 0.0 + param set MC_ATT_D 0.0 + param set MC_ATTRATE_P 0.12 + param set MC_ATTRATE_I 0.0 + param set MC_ATTRATE_D 0.004 + param set MC_YAWPOS_P 2.0 + param set MC_YAWPOS_I 0.0 + param set MC_YAWPOS_D 0.0 + param set MC_YAWRATE_P 0.3 + param set MC_YAWRATE_I 0.2 + param set MC_YAWRATE_D 0.005 + + # TODO add default MPC parameters +fi + +set VEHICLE_TYPE mc +set MIXER FMU_quad_+ + +set PWM_OUTPUTS 1234 +set PWM_RATE 400 +# DJI ESC range +set PWM_DISARMED 900 +set PWM_MIN 1200 +set PWM_MAX 1900 diff --git a/ROMFS/px4fmu_common/init.d/6001_hexa_x_pwm b/ROMFS/px4fmu_common/init.d/6001_hexa_x_pwm new file mode 100644 index 000000000..ddec8f36e --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/6001_hexa_x_pwm @@ -0,0 +1,37 @@ +#!nsh +# +# Generic 10” Hexa X geometry +# +# Maintainers: Lorenz Meier <lm@inf.ethz.ch> +# + +if [ $DO_AUTOCONFIG == yes ] +then + # + # Default parameters for this platform + # + param set MC_ATT_P 7.0 + param set MC_ATT_I 0.0 + param set MC_ATT_D 0.0 + param set MC_ATTRATE_P 0.12 + param set MC_ATTRATE_I 0.0 + param set MC_ATTRATE_D 0.004 + param set MC_YAWPOS_P 2.0 + param set MC_YAWPOS_I 0.0 + param set MC_YAWPOS_D 0.0 + param set MC_YAWRATE_P 0.3 + param set MC_YAWRATE_I 0.2 + param set MC_YAWRATE_D 0.005 + + # TODO add default MPC parameters +fi + +set VEHICLE_TYPE mc +set MIXER FMU_hexa_x + +set PWM_OUTPUTS 1234 +set PWM_RATE 400 +# DJI ESC range +set PWM_DISARMED 900 +set PWM_MIN 1200 +set PWM_MAX 1900 diff --git a/ROMFS/px4fmu_common/init.d/7001_hexa_+_pwm b/ROMFS/px4fmu_common/init.d/7001_hexa_+_pwm new file mode 100644 index 000000000..106e0fb54 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/7001_hexa_+_pwm @@ -0,0 +1,37 @@ +#!nsh +# +# Generic 10” Hexa + geometry +# +# Maintainers: Lorenz Meier <lm@inf.ethz.ch> +# + +if [ $DO_AUTOCONFIG == yes ] +then + # + # Default parameters for this platform + # + param set MC_ATT_P 7.0 + param set MC_ATT_I 0.0 + param set MC_ATT_D 0.0 + param set MC_ATTRATE_P 0.12 + param set MC_ATTRATE_I 0.0 + param set MC_ATTRATE_D 0.004 + param set MC_YAWPOS_P 2.0 + param set MC_YAWPOS_I 0.0 + param set MC_YAWPOS_D 0.0 + param set MC_YAWRATE_P 0.3 + param set MC_YAWRATE_I 0.2 + param set MC_YAWRATE_D 0.005 + + # TODO add default MPC parameters +fi + +set VEHICLE_TYPE mc +set MIXER FMU_hexa_+ + +set PWM_OUTPUTS 1234 +set PWM_RATE 400 +# DJI ESC range +set PWM_DISARMED 900 +set PWM_MIN 1200 +set PWM_MAX 1900 diff --git a/ROMFS/px4fmu_common/init.d/8001_octo_x_pwm b/ROMFS/px4fmu_common/init.d/8001_octo_x_pwm new file mode 100644 index 000000000..f0eea339b --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/8001_octo_x_pwm @@ -0,0 +1,37 @@ +#!nsh +# +# Generic 10” Octo X geometry +# +# Maintainers: Lorenz Meier <lm@inf.ethz.ch> +# + +if [ $DO_AUTOCONFIG == yes ] +then + # + # Default parameters for this platform + # + param set MC_ATT_P 7.0 + param set MC_ATT_I 0.0 + param set MC_ATT_D 0.0 + param set MC_ATTRATE_P 0.12 + param set MC_ATTRATE_I 0.0 + param set MC_ATTRATE_D 0.004 + param set MC_YAWPOS_P 2.0 + param set MC_YAWPOS_I 0.0 + param set MC_YAWPOS_D 0.0 + param set MC_YAWRATE_P 0.3 + param set MC_YAWRATE_I 0.2 + param set MC_YAWRATE_D 0.005 + + # TODO add default MPC parameters +fi + +set VEHICLE_TYPE mc +set MIXER FMU_octo_x + +set PWM_OUTPUTS 1234 +set PWM_RATE 400 +# DJI ESC range +set PWM_DISARMED 900 +set PWM_MIN 1200 +set PWM_MAX 1900 diff --git a/ROMFS/px4fmu_common/init.d/9001_octo_+_pwm b/ROMFS/px4fmu_common/init.d/9001_octo_+_pwm new file mode 100644 index 000000000..992a7aeba --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/9001_octo_+_pwm @@ -0,0 +1,37 @@ +#!nsh +# +# Generic 10” Octo + geometry +# +# Maintainers: Lorenz Meier <lm@inf.ethz.ch> +# + +if [ $DO_AUTOCONFIG == yes ] +then + # + # Default parameters for this platform + # + param set MC_ATT_P 7.0 + param set MC_ATT_I 0.0 + param set MC_ATT_D 0.0 + param set MC_ATTRATE_P 0.12 + param set MC_ATTRATE_I 0.0 + param set MC_ATTRATE_D 0.004 + param set MC_YAWPOS_P 2.0 + param set MC_YAWPOS_I 0.0 + param set MC_YAWPOS_D 0.0 + param set MC_YAWRATE_P 0.3 + param set MC_YAWRATE_I 0.2 + param set MC_YAWRATE_D 0.005 + + # TODO add default MPC parameters +fi + +set VEHICLE_TYPE mc +set MIXER FMU_octo_+ + +set PWM_OUTPUTS 1234 +set PWM_RATE 400 +# DJI ESC range +set PWM_DISARMED 900 +set PWM_MIN 1200 +set PWM_MAX 1900 diff --git a/ROMFS/px4fmu_common/init.d/cmp_test b/ROMFS/px4fmu_common/init.d/cmp_test deleted file mode 100644 index f86f4f85b..000000000 --- a/ROMFS/px4fmu_common/init.d/cmp_test +++ /dev/null @@ -1,9 +0,0 @@ -#!nsh - -cp /etc/extras/px4io-v2_default.bin /fs/microsd/px4io.loaded -if cmp /etc/extras/px4io-v2_default.bin /fs/microsd/px4io.loaded -then - echo "CMP returned true" -else - echo "CMP returned false" -fi
\ No newline at end of file diff --git a/ROMFS/px4fmu_common/init.d/rc.autostart b/ROMFS/px4fmu_common/init.d/rc.autostart index 325520dd0..34da2dfef 100644 --- a/ROMFS/px4fmu_common/init.d/rc.autostart +++ b/ROMFS/px4fmu_common/init.d/rc.autostart @@ -33,7 +33,7 @@ fi if param compare SYS_AUTOSTART 1002 then - #sh /etc/init.d/1002_rc_fw_state.hil + sh /etc/init.d/1002_rc_fw_state.hil fi if param compare SYS_AUTOSTART 1003 @@ -52,47 +52,47 @@ fi if param compare SYS_AUTOSTART 2100 100 then - #sh /etc/init.d/2100_mpx_easystar - #set MODE custom + sh /etc/init.d/2100_mpx_easystar + set MODE custom fi if param compare SYS_AUTOSTART 2101 101 then - #sh /etc/init.d/2101_hk_bixler - #set MODE custom + sh /etc/init.d/2101_hk_bixler + set MODE custom fi if param compare SYS_AUTOSTART 2102 102 then - #sh /etc/init.d/2102_3dr_skywalker - #set MODE custom + sh /etc/init.d/2102_3dr_skywalker + set MODE custom fi # # Flying wing # -if param compare SYS_AUTOSTART 3030 +if param compare SYS_AUTOSTART 3030 30 then - #sh /etc/init.d/3030_io_camflyer + sh /etc/init.d/3030_io_camflyer fi -if param compare SYS_AUTOSTART 3031 +if param compare SYS_AUTOSTART 3031 31 then sh /etc/init.d/3031_phantom fi -if param compare SYS_AUTOSTART 3032 +if param compare SYS_AUTOSTART 3032 32 then sh /etc/init.d/3032_skywalker_x5 fi -if param compare SYS_AUTOSTART 3033 +if param compare SYS_AUTOSTART 3033 33 then sh /etc/init.d/3033_wingwing fi -if param compare SYS_AUTOSTART 3034 +if param compare SYS_AUTOSTART 3034 34 then sh /etc/init.d/3034_fx79 fi @@ -101,41 +101,95 @@ fi # Quad X # -if param compare SYS_AUTOSTART 4008 +if param compare SYS_AUTOSTART 4008 8 then #sh /etc/init.d/4008_ardrone fi -if param compare SYS_AUTOSTART 4009 +if param compare SYS_AUTOSTART 4009 9 then #sh /etc/init.d/4009_ardrone_flow fi -if param compare SYS_AUTOSTART 4010 +if param compare SYS_AUTOSTART 4010 10 then sh /etc/init.d/4010_dji_f330 fi -if param compare SYS_AUTOSTART 4011 +if param compare SYS_AUTOSTART 4011 11 then sh /etc/init.d/4011_dji_f450 fi -if param compare SYS_AUTOSTART 4012 +if param compare SYS_AUTOSTART 4012 12 then sh /etc/init.d/4012_hk_x550 fi # +# Quad + +# + +if param compare SYS_AUTOSTART 5001 +then + sh /etc/init.d/5001_quad_+_pwm +fi + +# +# Hexa X +# + +if param compare SYS_AUTOSTART 6001 +then + sh /etc/init.d/6001_hexa_x_pwm +fi + +# +# Hexa + +# + +if param compare SYS_AUTOSTART 7001 +then + sh /etc/init.d/7001_hexa_+_pwm +fi + +# +# Octo X +# + +if param compare SYS_AUTOSTART 8001 +then + sh /etc/init.d/8001_octo_x_pwm +fi + +# +# Octo + +# + +if param compare SYS_AUTOSTART 9001 +then + sh /etc/init.d/9001_octo_+_pwm +fi + +# # Wide arm / H frame # -if param compare SYS_AUTOSTART 10015 +if param compare SYS_AUTOSTART 10015 15 then sh /etc/init.d/10015_tbs_discovery fi -if param compare SYS_AUTOSTART 10016 +if param compare SYS_AUTOSTART 10016 16 then sh /etc/init.d/10016_3dr_iris fi + +# +# Octo Coaxial +# + +if param compare SYS_AUTOSTART 12001 +then + sh /etc/init.d/12001_octo_cox_pwm +fi |