diff options
| -rw-r--r-- | Makefile | 87 | ||||
| -rw-r--r-- | makefiles/setup.mk | 1 | ||||
| -rw-r--r-- | makefiles/upload.mk | 2 | ||||
| -rw-r--r-- | nuttx-configs/px4fmu-v1/include/board.h | 395 | ||||
| -rw-r--r-- | nuttx-configs/px4fmu-v1/include/nsh_romfsimg.h | 42 | ||||
| -rw-r--r-- | nuttx-configs/px4fmu-v1/nsh/Make.defs | 179 | ||||
| -rw-r--r-- | nuttx-configs/px4fmu-v1/nsh/defconfig | 957 | ||||
| -rwxr-xr-x | nuttx-configs/px4fmu-v1/nsh/setenv.sh | 75 | ||||
| -rw-r--r-- | nuttx-configs/px4fmu-v1/scripts/ld.script | 149 | ||||
| -rw-r--r-- | nuttx-configs/px4fmu-v1/src/Makefile | 84 | ||||
| -rw-r--r-- | nuttx-configs/px4fmu-v1/src/empty.c | 4 | ||||
| -rwxr-xr-x | nuttx-configs/px4io-v1/include/README.txt | 1 | ||||
| -rwxr-xr-x | nuttx-configs/px4io-v1/include/board.h | 172 | ||||
| -rw-r--r-- | nuttx-configs/px4io-v1/nsh/Make.defs | 166 | ||||
| -rw-r--r-- | nuttx-configs/px4io-v1/nsh/appconfig | 32 | ||||
| -rwxr-xr-x | nuttx-configs/px4io-v1/nsh/defconfig | 559 | ||||
| -rwxr-xr-x | nuttx-configs/px4io-v1/nsh/setenv.sh | 47 | ||||
| -rwxr-xr-x | nuttx-configs/px4io-v1/scripts/ld.script | 129 | ||||
| -rw-r--r-- | nuttx-configs/px4io-v1/src/Makefile | 84 | ||||
| -rw-r--r-- | nuttx-configs/px4io-v1/src/empty.c | 4 |
20 files changed, 3126 insertions, 43 deletions
@@ -100,7 +100,7 @@ all: $(STAGED_FIRMWARES) # is taken care of. # $(STAGED_FIRMWARES): $(IMAGE_DIR)%.px4: $(BUILD_DIR)%.build/firmware.px4 - @echo %% Copying $@ + @$(ECHO) %% Copying $@ $(Q) $(COPY) $< $@ $(Q) $(COPY) $(patsubst %.px4,%.bin,$<) $(patsubst %.px4,%.bin,$@) @@ -111,9 +111,9 @@ $(STAGED_FIRMWARES): $(IMAGE_DIR)%.px4: $(BUILD_DIR)%.build/firmware.px4 $(BUILD_DIR)%.build/firmware.px4: config = $(patsubst $(BUILD_DIR)%.build/firmware.px4,%,$@) $(BUILD_DIR)%.build/firmware.px4: work_dir = $(BUILD_DIR)$(config).build/ $(FIRMWARES): $(BUILD_DIR)%.build/firmware.px4: - @echo %%%% - @echo %%%% Building $(config) in $(work_dir) - @echo %%%% + @$(ECHO) %%%% + @$(ECHO) %%%% Building $(config) in $(work_dir) + @$(ECHO) %%%% $(Q) mkdir -p $(work_dir) $(Q) make -r -C $(work_dir) \ -f $(PX4_MK_DIR)firmware.mk \ @@ -132,8 +132,6 @@ $(FIRMWARES): $(BUILD_DIR)%.build/firmware.px4: # XXX Should support fetching/unpacking from a separate directory to permit # downloads of the prebuilt archives as well... # -# XXX PX4IO configuration name is bad - NuttX configs should probably all be "px4" -# NUTTX_ARCHIVES = $(foreach board,$(BOARDS),$(ARCHIVE_DIR)$(board).export) .PHONY: archives archives: $(NUTTX_ARCHIVES) @@ -146,15 +144,22 @@ endif $(ARCHIVE_DIR)%.export: board = $(notdir $(basename $@)) $(ARCHIVE_DIR)%.export: configuration = nsh -$(NUTTX_ARCHIVES): $(ARCHIVE_DIR)%.export: $(NUTTX_SRC) $(NUTTX_APPS) - @echo %% Configuring NuttX for $(board) +$(NUTTX_ARCHIVES): $(ARCHIVE_DIR)%.export: $(NUTTX_SRC) + @$(ECHO) %% Configuring NuttX for $(board) $(Q) (cd $(NUTTX_SRC) && $(RMDIR) nuttx-export) $(Q) make -r -j1 -C $(NUTTX_SRC) -r $(MQUIET) distclean + $(Q) (cd $(NUTTX_SRC)/configs && $(COPYDIR) $(PX4_BASE)/nuttx-configs/$(board) .) $(Q) (cd $(NUTTX_SRC)tools && ./configure.sh $(board)/$(configuration)) - @echo %% Exporting NuttX for $(board) + @$(ECHO) %% Exporting NuttX for $(board) $(Q) make -r -j1 -C $(NUTTX_SRC) -r $(MQUIET) export $(Q) mkdir -p $(dir $@) $(Q) $(COPY) $(NUTTX_SRC)nuttx-export.zip $@ + $(Q) (cd $(NUTTX_SRC)/configs && $(RMDIR) $(board)) + +$(NUTTX_SRC): + @$(ECHO) "" + @$(ECHO) "NuttX sources missing - clone https://github.com/PX4/NuttX.git and try again." + @$(ECHO) "" # # Cleanup targets. 'clean' should remove all built products and force @@ -176,40 +181,40 @@ distclean: clean # .PHONY: help help: - @echo "" - @echo " PX4 firmware builder" - @echo " ====================" - @echo "" - @echo " Available targets:" - @echo " ------------------" - @echo "" - @echo " archives" - @echo " Build the NuttX RTOS archives that are used by the firmware build." - @echo "" - @echo " all" - @echo " Build all firmware configs: $(CONFIGS)" - @echo " A limited set of configs can be built with CONFIGS=<list-of-configs>" - @echo "" + @$(ECHO) "" + @$(ECHO) " PX4 firmware builder" + @$(ECHO) " ====================" + @$(ECHO) "" + @$(ECHO) " Available targets:" + @$(ECHO) " ------------------" + @$(ECHO) "" + @$(ECHO) " archives" + @$(ECHO) " Build the NuttX RTOS archives that are used by the firmware build." + @$(ECHO) "" + @$(ECHO) " all" + @$(ECHO) " Build all firmware configs: $(CONFIGS)" + @$(ECHO) " A limited set of configs can be built with CONFIGS=<list-of-configs>" + @$(ECHO) "" @for config in $(CONFIGS); do \ echo " $$config"; \ echo " Build just the $$config firmware configuration."; \ echo ""; \ done - @echo " clean" - @echo " Remove all firmware build pieces." - @echo "" - @echo " distclean" - @echo " Remove all compilation products, including NuttX RTOS archives." - @echo "" - @echo " upload" - @echo " When exactly one config is being built, add this target to upload the" - @echo " firmware to the board when the build is complete. Not supported for" - @echo " all configurations." - @echo "" - @echo " Common options:" - @echo " ---------------" - @echo "" - @echo " V=1" - @echo " If V is set, more verbose output is printed during the build. This can" - @echo " help when diagnosing issues with the build or toolchain." - @echo "" + @$(ECHO) " clean" + @$(ECHO) " Remove all firmware build pieces." + @$(ECHO) "" + @$(ECHO) " distclean" + @$(ECHO) " Remove all compilation products, including NuttX RTOS archives." + @$(ECHO) "" + @$(ECHO) " upload" + @$(ECHO) " When exactly one config is being built, add this target to upload the" + @$(ECHO) " firmware to the board when the build is complete. Not supported for" + @$(ECHO) " all configurations." + @$(ECHO) "" + @$(ECHO) " Common options:" + @$(ECHO) " ---------------" + @$(ECHO) "" + @$(ECHO) " V=1" + @$(ECHO) " If V is set, more verbose output is printed during the build. This can" + @$(ECHO) " help when diagnosing issues with the build or toolchain." + @$(ECHO) "" diff --git a/makefiles/setup.mk b/makefiles/setup.mk index 92461fafb..168e41a5c 100644 --- a/makefiles/setup.mk +++ b/makefiles/setup.mk @@ -65,6 +65,7 @@ export INCLUDE_DIRS := $(PX4_MODULE_SRC) \ export MKFW = $(PX4_BASE)/Tools/px_mkfw.py export UPLOADER = $(PX4_BASE)/Tools/px_uploader.py export COPY = cp +export COPYDIR = cp -Rf export REMOVE = rm -f export RMDIR = rm -rf export GENROMFS = genromfs diff --git a/makefiles/upload.mk b/makefiles/upload.mk index 4b01b447d..3aebef863 100644 --- a/makefiles/upload.mk +++ b/makefiles/upload.mk @@ -27,8 +27,6 @@ all: upload-$(METHOD)-$(BOARD) upload-serial-px4fmu-v1: $(BUNDLE) $(UPLOADER) $(Q) $(PYTHON) -u $(UPLOADER) --port $(SERIAL_PORTS) $(BUNDLE) -upload-serial-px4fmuv2: $(BUNDLE) $(UPLOADER) - $(Q) $(PYTHON) -u $(UPLOADER) --port $(SERIAL_PORTS) $(BUNDLE) # # JTAG firmware uploading with OpenOCD diff --git a/nuttx-configs/px4fmu-v1/include/board.h b/nuttx-configs/px4fmu-v1/include/board.h new file mode 100644 index 000000000..0fa93a196 --- /dev/null +++ b/nuttx-configs/px4fmu-v1/include/board.h @@ -0,0 +1,395 @@ +/************************************************************************************ + * configs/stm32f4discovery/include/board.h + * include/arch/board/board.h + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#ifndef __CONFIG_PX4FMU_V1_INCLUDE_BOARD_H +#define __CONFIG_PX4FMU_V1_INCLUDE_BOARD_H + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include <nuttx/config.h> + +#ifndef __ASSEMBLY__ +# include <stdint.h> +#endif + +#include "stm32_rcc.h" +#include "stm32_sdio.h" +#include "stm32.h" + +/************************************************************************************ + * Definitions + ************************************************************************************/ + +/* Clocking *************************************************************************/ +/* The PX4FMU uses a 24MHz crystal connected to the HSE. + * + * This is the canonical configuration: + * System Clock source : PLL (HSE) + * SYSCLK(Hz) : 168000000 Determined by PLL configuration + * HCLK(Hz) : 168000000 (STM32_RCC_CFGR_HPRE) + * AHB Prescaler : 1 (STM32_RCC_CFGR_HPRE) + * APB1 Prescaler : 4 (STM32_RCC_CFGR_PPRE1) + * APB2 Prescaler : 2 (STM32_RCC_CFGR_PPRE2) + * HSE Frequency(Hz) : 24000000 (STM32_BOARD_XTAL) + * PLLM : 24 (STM32_PLLCFG_PLLM) + * PLLN : 336 (STM32_PLLCFG_PLLN) + * PLLP : 2 (STM32_PLLCFG_PLLP) + * PLLQ : 7 (STM32_PLLCFG_PLLQ) + * Main regulator output voltage : Scale1 mode Needed for high speed SYSCLK + * Flash Latency(WS) : 5 + * Prefetch Buffer : OFF + * Instruction cache : ON + * Data cache : ON + * Require 48MHz for USB OTG FS, : Enabled + * SDIO and RNG clock + */ + +/* HSI - 16 MHz RC factory-trimmed + * LSI - 32 KHz RC + * HSE - On-board crystal frequency is 24MHz + * LSE - not installed + */ + +#define STM32_BOARD_XTAL 24000000ul + +#define STM32_HSI_FREQUENCY 16000000ul +#define STM32_LSI_FREQUENCY 32000 +#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL +//#define STM32_LSE_FREQUENCY 32768 + +/* Main PLL Configuration. + * + * PLL source is HSE + * PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN + * = (8,000,000 / 8) * 336 + * = 336,000,000 + * SYSCLK = PLL_VCO / PLLP + * = 336,000,000 / 2 = 168,000,000 + * USB OTG FS, SDIO and RNG Clock + * = PLL_VCO / PLLQ + * = 48,000,000 + */ + +#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(24) +#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(336) +#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2 +#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(7) + +#define STM32_SYSCLK_FREQUENCY 168000000ul + +/* AHB clock (HCLK) is SYSCLK (168MHz) */ + +#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */ +#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY +#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */ + +/* APB1 clock (PCLK1) is HCLK/4 (42MHz) */ + +#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd4 /* PCLK1 = HCLK / 4 */ +#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/4) + +/* Timers driven from APB1 will be twice PCLK1 */ + +#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY) + +/* APB2 clock (PCLK2) is HCLK/2 (84MHz) */ + +#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */ +#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2) + +/* Timers driven from APB2 will be twice PCLK2 */ + +#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY) +#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY) +#define STM32_APB2_TIM9_CLKIN (2*STM32_PCLK2_FREQUENCY) +#define STM32_APB2_TIM10_CLKIN (2*STM32_PCLK2_FREQUENCY) +#define STM32_APB2_TIM11_CLKIN (2*STM32_PCLK2_FREQUENCY) + +/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx + * otherwise frequency is 2xAPBx. + * Note: TIM1,8 are on APB2, others on APB1 + */ + +#define STM32_TIM18_FREQUENCY (2*STM32_PCLK2_FREQUENCY) +#define STM32_TIM27_FREQUENCY (2*STM32_PCLK1_FREQUENCY) + +/* High-resolution timer + */ +#ifdef CONFIG_HRT_TIMER +# define HRT_TIMER 1 /* use timer1 for the HRT */ +# define HRT_TIMER_CHANNEL 1 /* use capture/compare channel */ +#endif + +/* LED definitions ******************************************************************/ +/* If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any + * way. The following definitions are used to access individual LEDs. + */ + +/* LED index values for use with stm32_setled() */ + +#define BOARD_LED1 0 +#define BOARD_LED2 1 +#define BOARD_NLEDS 2 + +#define BOARD_LED_BLUE BOARD_LED1 +#define BOARD_LED_RED BOARD_LED2 + +/* LED bits for use with stm32_setleds() */ + +#define BOARD_LED1_BIT (1 << BOARD_LED1) +#define BOARD_LED2_BIT (1 << BOARD_LED2) + +/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the 2 LEDs on board the + * px4fmu-v1. The following definitions describe how NuttX controls the LEDs: + */ + +#define LED_STARTED 0 /* LED1 */ +#define LED_HEAPALLOCATE 1 /* LED2 */ +#define LED_IRQSENABLED 2 /* LED1 */ +#define LED_STACKCREATED 3 /* LED1 + LED2 */ +#define LED_INIRQ 4 /* LED1 */ +#define LED_SIGNAL 5 /* LED2 */ +#define LED_ASSERTION 6 /* LED1 + LED2 */ +#define LED_PANIC 7 /* LED1 + LED2 */ + +/* Alternate function pin selections ************************************************/ + +/* + * UARTs. + * + * Note that UART5 has no optional pinout, so it is not listed here. + */ +#define GPIO_USART1_RX GPIO_USART1_RX_2 +#define GPIO_USART1_TX GPIO_USART1_TX_2 + +#define GPIO_USART2_RX GPIO_USART2_RX_1 +#define GPIO_USART2_TX GPIO_USART2_TX_1 +#define GPIO_USART2_RTS GPIO_USART2_RTS_1 +#define GPIO_USART2_CTS GPIO_USART2_CTS_1 + +#define GPIO_USART6_RX GPIO_USART6_RX_1 +#define GPIO_USART6_TX GPIO_USART6_TX_1 + +/* UART DMA configuration for USART1/6 */ +#define DMAMAP_USART1_RX DMAMAP_USART1_RX_2 +#define DMAMAP_USART6_RX DMAMAP_USART6_RX_2 + +/* + * PWM + * + * Four PWM outputs can be configured on pins otherwise shared with + * USART2; two can take the flow control pins if they are not being used. + * + * Pins: + * + * CTS - PA0 - TIM2CH1 + * RTS - PA1 - TIM2CH2 + * TX - PA2 - TIM2CH3 + * RX - PA3 - TIM2CH4 + * + */ +#define GPIO_TIM2_CH1OUT GPIO_TIM2_CH1OUT_1 +#define GPIO_TIM2_CH2OUT GPIO_TIM2_CH2OUT_1 +#define GPIO_TIM2_CH3OUT GPIO_TIM2_CH3OUT_1 +#define GPIO_TIM2_CH4OUT GPIO_TIM2_CH4OUT_1 + +/* + * PPM + * + * PPM input is handled by the HRT timer. + */ +#if defined(CONFIG_HRT_TIMER) && defined (CONFIG_HRT_PPM) +# define HRT_PPM_CHANNEL 3 /* use capture/compare channel 3 */ +# define GPIO_PPM_IN (GPIO_ALT|GPIO_AF1|GPIO_SPEED_50MHz|GPIO_PULLUP|GPIO_PORTA|GPIO_PIN10) +#endif + +/* + * CAN + * + * CAN2 is routed to the expansion connector. + */ + +#define GPIO_CAN2_RX GPIO_CAN2_RX_2 +#define GPIO_CAN2_TX GPIO_CAN2_TX_2 + +/* + * I2C + * + * The optional _GPIO configurations allow the I2C driver to manually + * reset the bus to clear stuck slaves. They match the pin configuration, + * but are normally-high GPIOs. + */ +#define GPIO_I2C1_SCL GPIO_I2C1_SCL_2 +#define GPIO_I2C1_SDA GPIO_I2C1_SDA_2 +#define GPIO_I2C1_SCL_GPIO (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN8) +#define GPIO_I2C1_SDA_GPIO (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN9) + +#define GPIO_I2C2_SCL GPIO_I2C2_SCL_1 +#define GPIO_I2C2_SDA GPIO_I2C2_SDA_1 +#define GPIO_I2C2_SCL_GPIO (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN10) +#define GPIO_I2C2_SDA_GPIO (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN11) + +#define GPIO_I2C3_SCL GPIO_I2C3_SCL_1 +#define GPIO_I2C3_SDA GPIO_I2C3_SDA_1 +#define GPIO_I2C3_SCL_GPIO (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN8) +#define GPIO_I2C3_SDA_GPIO (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN9) + +/* + * I2C busses + */ +#define PX4_I2C_BUS_ESC 1 +#define PX4_I2C_BUS_ONBOARD 2 +#define PX4_I2C_BUS_EXPANSION 3 + +/* + * Devices on the onboard bus. + * + * Note that these are unshifted addresses. + */ +#define PX4_I2C_OBDEV_HMC5883 0x1e +#define PX4_I2C_OBDEV_MS5611 0x76 +#define PX4_I2C_OBDEV_EEPROM NOTDEFINED + +#define PX4_I2C_OBDEV_PX4IO_BL 0x18 +#define PX4_I2C_OBDEV_PX4IO 0x1a + +/* + * SPI + * + * There are sensors on SPI1, and SPI3 is connected to the microSD slot. + */ +#define GPIO_SPI1_MISO GPIO_SPI1_MISO_1 +#define GPIO_SPI1_MOSI GPIO_SPI1_MOSI_1 +#define GPIO_SPI1_SCK GPIO_SPI1_SCK_1 + +#define GPIO_SPI3_MISO GPIO_SPI3_MISO_2 +#define GPIO_SPI3_MOSI GPIO_SPI3_MOSI_1 +#define GPIO_SPI3_SCK GPIO_SPI3_SCK_2 +#define GPIO_SPI3_NSS GPIO_SPI3_NSS_2 + +/* SPI DMA configuration for SPI3 (microSD) */ +#define DMACHAN_SPI3_RX DMAMAP_SPI3_RX_1 +#define DMACHAN_SPI3_TX DMAMAP_SPI3_TX_2 +/* XXX since we allocate the HP work stack from CCM RAM on normal system startup, + SPI1 will never run in DMA mode - so we can just give it a random config here. + What we really need to do is to make DMA configurable per channel, and always + disable it for SPI1. */ +#define DMACHAN_SPI1_RX DMAMAP_SPI1_RX_1 +#define DMACHAN_SPI1_TX DMAMAP_SPI1_TX_2 + +/* + * Use these in place of the spi_dev_e enumeration to + * select a specific SPI device on SPI1 + */ +#define PX4_SPIDEV_GYRO 1 +#define PX4_SPIDEV_ACCEL 2 +#define PX4_SPIDEV_MPU 3 + +/* + * Optional devices on IO's external port + */ +#define PX4_SPIDEV_ACCEL_MAG 2 + +/* + * Tone alarm output + */ +#define TONE_ALARM_TIMER 3 /* timer 3 */ +#define TONE_ALARM_CHANNEL 3 /* channel 3 */ +#define GPIO_TONE_ALARM_IDLE (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN8) +#define GPIO_TONE_ALARM (GPIO_ALT|GPIO_AF2|GPIO_SPEED_2MHz|GPIO_FLOAT|GPIO_PUSHPULL|GPIO_PORTC|GPIO_PIN8) + +/************************************************************************************ + * Public Data + ************************************************************************************/ + +#ifndef __ASSEMBLY__ + +#undef EXTERN +#if defined(__cplusplus) +#define EXTERN extern "C" +extern "C" { +#else +#define EXTERN extern +#endif + +/************************************************************************************ + * Public Function Prototypes + ************************************************************************************/ +/************************************************************************************ + * Name: stm32_boardinitialize + * + * Description: + * All STM32 architectures must provide the following entry point. This entry point + * is called early in the intitialization -- after all memory has been configured + * and mapped but before any devices have been initialized. + * + ************************************************************************************/ + +EXTERN void stm32_boardinitialize(void); + +/************************************************************************************ + * Name: stm32_ledinit, stm32_setled, and stm32_setleds + * + * Description: + * If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board LEDs. If + * CONFIG_ARCH_LEDS is not defined, then the following interfacesare available to + * control the LEDs from user applications. + * + ************************************************************************************/ + +#ifndef CONFIG_ARCH_LEDS +EXTERN void stm32_ledinit(void); +EXTERN void stm32_setled(int led, bool ledon); +EXTERN void stm32_setleds(uint8_t ledset); +#endif + +#undef EXTERN +#if defined(__cplusplus) +} +#endif + +#endif /* __ASSEMBLY__ */ +#endif /* __CONFIG_PX4FMU_V1_INCLUDE_BOARD_H */ diff --git a/nuttx-configs/px4fmu-v1/include/nsh_romfsimg.h b/nuttx-configs/px4fmu-v1/include/nsh_romfsimg.h new file mode 100644 index 000000000..15e4e7a8d --- /dev/null +++ b/nuttx-configs/px4fmu-v1/include/nsh_romfsimg.h @@ -0,0 +1,42 @@ +/**************************************************************************** + * + * Copyright (C) 2013 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * nsh_romfsetc.h + * + * This file is a stub for 'make export' purposes; the actual ROMFS + * must be supplied by the library client. + */ + +extern unsigned char romfs_img[]; +extern unsigned int romfs_img_len; diff --git a/nuttx-configs/px4fmu-v1/nsh/Make.defs b/nuttx-configs/px4fmu-v1/nsh/Make.defs new file mode 100644 index 000000000..7b2ea703a --- /dev/null +++ b/nuttx-configs/px4fmu-v1/nsh/Make.defs @@ -0,0 +1,179 @@ +############################################################################ +# configs/px4fmu-v1/nsh/Make.defs +# +# Copyright (C) 2011 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +include ${TOPDIR}/.config +include ${TOPDIR}/tools/Config.mk + +# +# We only support building with the ARM bare-metal toolchain from +# https://launchpad.net/gcc-arm-embedded on Windows, Linux or Mac OS. +# +CONFIG_ARMV7M_TOOLCHAIN := GNU_EABI + +include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs + +CC = $(CROSSDEV)gcc +CXX = $(CROSSDEV)g++ +CPP = $(CROSSDEV)gcc -E +LD = $(CROSSDEV)ld +AR = $(CROSSDEV)ar rcs +NM = $(CROSSDEV)nm +OBJCOPY = $(CROSSDEV)objcopy +OBJDUMP = $(CROSSDEV)objdump + +MAXOPTIMIZATION = -O3 +ARCHCPUFLAGS = -mcpu=cortex-m4 \ + -mthumb \ + -march=armv7e-m \ + -mfpu=fpv4-sp-d16 \ + -mfloat-abi=hard + + +# enable precise stack overflow tracking +INSTRUMENTATIONDEFINES = -finstrument-functions \ + -ffixed-r10 + +# pull in *just* libm from the toolchain ... this is grody +LIBM = "${shell $(CC) $(ARCHCPUFLAGS) -print-file-name=libm.a}" +EXTRA_LIBS += $(LIBM) + +# use our linker script +LDSCRIPT = ld.script + +ifeq ($(WINTOOL),y) + # Windows-native toolchains + DIRLINK = $(TOPDIR)/tools/copydir.sh + DIRUNLINK = $(TOPDIR)/tools/unlink.sh + MKDEP = $(TOPDIR)/tools/mknulldeps.sh + ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" + ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" +else + ifeq ($(PX4_WINTOOL),y) + # Windows-native toolchains (MSYS) + DIRLINK = $(TOPDIR)/tools/copydir.sh + DIRUNLINK = $(TOPDIR)/tools/unlink.sh + MKDEP = $(TOPDIR)/tools/mknulldeps.sh + ARCHINCLUDES = -I. -isystem $(TOPDIR)/include + ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) + else + # Linux/Cygwin-native toolchain + MKDEP = $(TOPDIR)/tools/mkdeps.sh + ARCHINCLUDES = -I. -isystem $(TOPDIR)/include + ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) + endif +endif + +# tool versions +ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} +ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} + +# optimisation flags +ARCHOPTIMIZATION = $(MAXOPTIMIZATION) \ + -fno-strict-aliasing \ + -fno-strength-reduce \ + -fomit-frame-pointer \ + -funsafe-math-optimizations \ + -fno-builtin-printf \ + -ffunction-sections \ + -fdata-sections + +ifeq ("${CONFIG_DEBUG_SYMBOLS}","y") +ARCHOPTIMIZATION += -g +endif + +ARCHCFLAGS = -std=gnu99 +ARCHCXXFLAGS = -fno-exceptions -fno-rtti -std=gnu++0x +ARCHWARNINGS = -Wall \ + -Wextra \ + -Wdouble-promotion \ + -Wshadow \ + -Wfloat-equal \ + -Wframe-larger-than=1024 \ + -Wpointer-arith \ + -Wlogical-op \ + -Wmissing-declarations \ + -Wpacked \ + -Wno-unused-parameter +# -Wcast-qual - generates spurious noreturn attribute warnings, try again later +# -Wconversion - would be nice, but too many "risky-but-safe" conversions in the code +# -Wcast-align - would help catch bad casts in some cases, but generates too many false positives + +ARCHCWARNINGS = $(ARCHWARNINGS) \ + -Wbad-function-cast \ + -Wstrict-prototypes \ + -Wold-style-declaration \ + -Wmissing-parameter-type \ + -Wmissing-prototypes \ + -Wnested-externs \ + -Wunsuffixed-float-constants +ARCHWARNINGSXX = $(ARCHWARNINGS) \ + -Wno-psabi +ARCHDEFINES = +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 + +# this seems to be the only way to add linker flags +EXTRA_LIBS += --warn-common \ + --gc-sections + +CFLAGS = $(ARCHCFLAGS) $(ARCHCWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -fno-common +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) +CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) +CPPFLAGS = $(ARCHINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES) +AFLAGS = $(CFLAGS) -D__ASSEMBLY__ + +NXFLATLDFLAGS1 = -r -d -warn-common +NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections +LDNXFLATFLAGS = -e main -s 2048 + +OBJEXT = .o +LIBEXT = .a +EXEEXT = + + +# produce partially-linked $1 from files in $2 +define PRELINK + @echo "PRELINK: $1" + $(Q) $(LD) -Ur -o $1 $2 && $(OBJCOPY) --localize-hidden $1 +endef + +HOSTCC = gcc +HOSTINCLUDES = -I. +HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe +HOSTLDFLAGS = + diff --git a/nuttx-configs/px4fmu-v1/nsh/defconfig b/nuttx-configs/px4fmu-v1/nsh/defconfig new file mode 100644 index 000000000..49ccfd41b --- /dev/null +++ b/nuttx-configs/px4fmu-v1/nsh/defconfig @@ -0,0 +1,957 @@ +# +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# +CONFIG_NUTTX_NEWCONFIG=y + +# +# Build Setup +# +# CONFIG_EXPERIMENTAL is not set +# CONFIG_HOST_LINUX is not set +CONFIG_HOST_OSX=y +# CONFIG_HOST_WINDOWS is not set +# CONFIG_HOST_OTHER is not set + +# +# Build Configuration +# +CONFIG_APPS_DIR="../apps" +# CONFIG_BUILD_2PASS is not set + +# +# Binary Output Formats +# +# CONFIG_RRLOAD_BINARY is not set +# CONFIG_INTELHEX_BINARY is not set +# CONFIG_MOTOROLA_SREC is not set +CONFIG_RAW_BINARY=y + +# +# Customize Header Files +# +# CONFIG_ARCH_STDBOOL_H is not set +CONFIG_ARCH_MATH_H=y +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set + +# +# Debug Options +# +# CONFIG_DEBUG is not set +CONFIG_DEBUG_SYMBOLS=y + +# +# System Type +# +# CONFIG_ARCH_8051 is not set +CONFIG_ARCH_ARM=y +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_SH is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="arm" + +# +# ARM Options +# +# CONFIG_ARCH_CHIP_C5471 is not set +# CONFIG_ARCH_CHIP_CALYPSO is not set +# CONFIG_ARCH_CHIP_DM320 is not set +# CONFIG_ARCH_CHIP_IMX is not set +# CONFIG_ARCH_CHIP_KINETIS is not set +# CONFIG_ARCH_CHIP_KL is not set +# CONFIG_ARCH_CHIP_LM is not set +# CONFIG_ARCH_CHIP_LPC17XX is not set +# CONFIG_ARCH_CHIP_LPC214X is not set +# CONFIG_ARCH_CHIP_LPC2378 is not set +# CONFIG_ARCH_CHIP_LPC31XX is not set +# CONFIG_ARCH_CHIP_LPC43XX is not set +# CONFIG_ARCH_CHIP_NUC1XX is not set +# CONFIG_ARCH_CHIP_SAM3U is not set +CONFIG_ARCH_CHIP_STM32=y +# CONFIG_ARCH_CHIP_STR71X is not set +CONFIG_ARCH_CORTEXM4=y +CONFIG_ARCH_HAVE_FPU=y +CONFIG_ARCH_FAMILY="armv7-m" +CONFIG_ARCH_CHIP="stm32" +CONFIG_ARMV7M_USEBASEPRI=y +CONFIG_ARCH_HAVE_CMNVECTOR=y +CONFIG_ARMV7M_CMNVECTOR=y +CONFIG_ARMV7M_STACKCHECK=y +CONFIG_ARCH_FPU=y +CONFIG_ARCH_HAVE_MPU=y +# CONFIG_ARMV7M_MPU is not set + +# +# ARMV7M Configuration Options +# +# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set +CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y +CONFIG_SERIAL_TERMIOS=y +CONFIG_SERIAL_DISABLE_REORDERING=y +CONFIG_SERIAL_IFLOWCONTROL=y +CONFIG_SERIAL_OFLOWCONTROL=y + +# +# STM32 Configuration Options +# +# CONFIG_ARCH_CHIP_STM32L151C6 is not set +# CONFIG_ARCH_CHIP_STM32L151C8 is not set +# CONFIG_ARCH_CHIP_STM32L151CB is not set +# CONFIG_ARCH_CHIP_STM32L151R6 is not set +# CONFIG_ARCH_CHIP_STM32L151R8 is not set +# CONFIG_ARCH_CHIP_STM32L151RB is not set +# CONFIG_ARCH_CHIP_STM32L151V6 is not set +# CONFIG_ARCH_CHIP_STM32L151V8 is not set +# CONFIG_ARCH_CHIP_STM32L151VB is not set +# CONFIG_ARCH_CHIP_STM32L152C6 is not set +# CONFIG_ARCH_CHIP_STM32L152C8 is not set +# CONFIG_ARCH_CHIP_STM32L152CB is not set +# CONFIG_ARCH_CHIP_STM32L152R6 is not set +# CONFIG_ARCH_CHIP_STM32L152R8 is not set +# CONFIG_ARCH_CHIP_STM32L152RB is not set +# CONFIG_ARCH_CHIP_STM32L152V6 is not set +# CONFIG_ARCH_CHIP_STM32L152V8 is not set +# CONFIG_ARCH_CHIP_STM32L152VB is not set +# CONFIG_ARCH_CHIP_STM32F100C8 is not set +# CONFIG_ARCH_CHIP_STM32F100CB is not set +# CONFIG_ARCH_CHIP_STM32F100R8 is not set +# CONFIG_ARCH_CHIP_STM32F100RB is not set +# CONFIG_ARCH_CHIP_STM32F100RC is not set +# CONFIG_ARCH_CHIP_STM32F100RD is not set +# CONFIG_ARCH_CHIP_STM32F100RE is not set +# CONFIG_ARCH_CHIP_STM32F100V8 is not set +# CONFIG_ARCH_CHIP_STM32F100VB is not set +# CONFIG_ARCH_CHIP_STM32F100VC is not set +# CONFIG_ARCH_CHIP_STM32F100VD is not set +# CONFIG_ARCH_CHIP_STM32F100VE is not set +# CONFIG_ARCH_CHIP_STM32F103C4 is not set +# CONFIG_ARCH_CHIP_STM32F103C8 is not set +# CONFIG_ARCH_CHIP_STM32F103RET6 is not set +# CONFIG_ARCH_CHIP_STM32F103VCT6 is not set +# CONFIG_ARCH_CHIP_STM32F103VET6 is not set +# CONFIG_ARCH_CHIP_STM32F103ZET6 is not set +# CONFIG_ARCH_CHIP_STM32F105VBT7 is not set +# CONFIG_ARCH_CHIP_STM32F107VC is not set +# CONFIG_ARCH_CHIP_STM32F207IG is not set +# CONFIG_ARCH_CHIP_STM32F302CB is not set +# CONFIG_ARCH_CHIP_STM32F302CC is not set +# CONFIG_ARCH_CHIP_STM32F302RB is not set +# CONFIG_ARCH_CHIP_STM32F302RC is not set +# CONFIG_ARCH_CHIP_STM32F302VB is not set +# CONFIG_ARCH_CHIP_STM32F302VC is not set +# CONFIG_ARCH_CHIP_STM32F303CB is not set +# CONFIG_ARCH_CHIP_STM32F303CC is not set +# CONFIG_ARCH_CHIP_STM32F303RB is not set +# CONFIG_ARCH_CHIP_STM32F303RC is not set +# CONFIG_ARCH_CHIP_STM32F303VB is not set +# CONFIG_ARCH_CHIP_STM32F303VC is not set +CONFIG_ARCH_CHIP_STM32F405RG=y +# CONFIG_ARCH_CHIP_STM32F405VG is not set +# CONFIG_ARCH_CHIP_STM32F405ZG is not set +# CONFIG_ARCH_CHIP_STM32F407VE is not set +# CONFIG_ARCH_CHIP_STM32F407VG is not set +# CONFIG_ARCH_CHIP_STM32F407ZE is not set +# CONFIG_ARCH_CHIP_STM32F407ZG is not set +# CONFIG_ARCH_CHIP_STM32F407IE is not set +# CONFIG_ARCH_CHIP_STM32F407IG is not set +# CONFIG_ARCH_CHIP_STM32F427V is not set +# CONFIG_ARCH_CHIP_STM32F427Z is not set +# CONFIG_ARCH_CHIP_STM32F427I is not set +# CONFIG_STM32_STM32L15XX is not set +# CONFIG_STM32_ENERGYLITE is not set +# CONFIG_STM32_STM32F10XX is not set +# CONFIG_STM32_VALUELINE is not set +# CONFIG_STM32_CONNECTIVITYLINE is not set +# CONFIG_STM32_PERFORMANCELINE is not set +# CONFIG_STM32_HIGHDENSITY is not set +# CONFIG_STM32_MEDIUMDENSITY is not set +# CONFIG_STM32_LOWDENSITY is not set +# CONFIG_STM32_STM32F20XX is not set +# CONFIG_STM32_STM32F30XX is not set +CONFIG_STM32_STM32F40XX=y +# CONFIG_STM32_DFU is not set + +# +# STM32 Peripheral Support +# +CONFIG_STM32_ADC1=y +# CONFIG_STM32_ADC2 is not set +# CONFIG_STM32_ADC3 is not set +CONFIG_STM32_BKPSRAM=y +# CONFIG_STM32_CAN1 is not set +# CONFIG_STM32_CAN2 is not set +CONFIG_STM32_CCMDATARAM=y +# CONFIG_STM32_CRC is not set +# CONFIG_STM32_CRYP is not set +CONFIG_STM32_DMA1=y +CONFIG_STM32_DMA2=y +# CONFIG_STM32_DAC1 is not set +# CONFIG_STM32_DAC2 is not set +# CONFIG_STM32_DCMI is not set +# CONFIG_STM32_ETHMAC is not set +# CONFIG_STM32_FSMC is not set +# CONFIG_STM32_HASH is not set +CONFIG_STM32_I2C1=y +CONFIG_STM32_I2C2=y +CONFIG_STM32_I2C3=y +CONFIG_STM32_OTGFS=y +# CONFIG_STM32_OTGHS is not set +CONFIG_STM32_PWR=y +# CONFIG_STM32_RNG is not set +# CONFIG_STM32_SDIO is not set +CONFIG_STM32_SPI1=y +# CONFIG_STM32_SPI2 is not set +CONFIG_STM32_SPI3=y +CONFIG_STM32_SYSCFG=y +# CONFIG_STM32_TIM1 is not set +# CONFIG_STM32_TIM2 is not set +# CONFIG_STM32_TIM3 is not set +CONFIG_STM32_TIM4=y +CONFIG_STM32_TIM5=y +CONFIG_STM32_TIM6=y +CONFIG_STM32_TIM7=y +# CONFIG_STM32_TIM8 is not set +CONFIG_STM32_TIM9=y +CONFIG_STM32_TIM10=y +CONFIG_STM32_TIM11=y +CONFIG_STM32_TIM12=y +CONFIG_STM32_TIM13=y +CONFIG_STM32_TIM14=y +CONFIG_STM32_USART1=y +CONFIG_STM32_USART2=y +# CONFIG_STM32_USART3 is not set +# CONFIG_STM32_UART4 is not set +CONFIG_STM32_UART5=y +CONFIG_STM32_USART6=y +# CONFIG_STM32_IWDG is not set +CONFIG_STM32_WWDG=y +CONFIG_STM32_ADC=y +CONFIG_STM32_SPI=y +CONFIG_STM32_I2C=y + +# +# Alternate Pin Mapping +# +CONFIG_STM32_FLASH_PREFETCH=y +# CONFIG_STM32_JTAG_DISABLE is not set +CONFIG_STM32_JTAG_FULL_ENABLE=y +# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set +# CONFIG_STM32_JTAG_SW_ENABLE is not set +CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y +# CONFIG_STM32_FORCEPOWER is not set +# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set +# CONFIG_STM32_CCMEXCLUDE is not set +# CONFIG_STM32_TIM4_PWM is not set +# CONFIG_STM32_TIM5_PWM is not set +# CONFIG_STM32_TIM9_PWM is not set +# CONFIG_STM32_TIM10_PWM is not set +# CONFIG_STM32_TIM11_PWM is not set +# CONFIG_STM32_TIM12_PWM is not set +# CONFIG_STM32_TIM13_PWM is not set +# CONFIG_STM32_TIM14_PWM is not set +# CONFIG_STM32_TIM4_ADC is not set +# CONFIG_STM32_TIM5_ADC is not set +CONFIG_STM32_USART=y + +# +# U[S]ART Configuration +# +# CONFIG_USART1_RS485 is not set +# CONFIG_USART1_RXDMA is not set +# CONFIG_USART2_RS485 is not set +CONFIG_USART2_RXDMA=y +# CONFIG_USART3_RXDMA is not set +# CONFIG_UART4_RXDMA is not set +# CONFIG_UART5_RS485 is not set +CONFIG_UART5_RXDMA=y +# CONFIG_USART6_RS485 is not set +CONFIG_USART6_RXDMA=y +# CONFIG_USART7_RXDMA is not set +# CONFIG_USART8_RXDMA is not set +CONFIG_STM32_USART_SINGLEWIRE=y + +# +# SPI Configuration +# +# CONFIG_STM32_SPI_INTERRUPTS is not set +# CONFIG_STM32_SPI_DMA is not set + +# +# I2C Configuration +# +# CONFIG_STM32_I2C_DYNTIMEO is not set +CONFIG_STM32_I2CTIMEOSEC=0 +CONFIG_STM32_I2CTIMEOMS=10 +CONFIG_STM32_I2CTIMEOTICKS=500 +# CONFIG_STM32_I2C_DUTY16_9 is not set + +# +# USB Host Configuration +# + +# +# USB Device Configuration +# + +# +# External Memory Configuration +# + +# +# Architecture Options +# +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_VECNOTIRQ is not set +CONFIG_ARCH_DMA=y +CONFIG_ARCH_IRQPRIO=y +# CONFIG_CUSTOM_STACK is not set +# CONFIG_ADDRENV is not set +CONFIG_ARCH_HAVE_VFORK=y +CONFIG_ARCH_STACKDUMP=y +# CONFIG_ENDIAN_BIG is not set +# CONFIG_ARCH_HAVE_RAMFUNCS is not set +CONFIG_ARCH_HAVE_RAMVECTORS=y +# CONFIG_ARCH_RAMVECTORS is not set + +# +# Board Settings +# +CONFIG_BOARD_LOOPSPERMSEC=16717 +# CONFIG_ARCH_CALIBRATION is not set +CONFIG_DRAM_START=0x20000000 +CONFIG_DRAM_SIZE=196608 +CONFIG_ARCH_HAVE_INTERRUPTSTACK=y +CONFIG_ARCH_INTERRUPTSTACK=0 + +# +# Boot options +# +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set + +# +# Board Selection +# +CONFIG_ARCH_BOARD_PX4FMU_V1=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="px4fmu-v1" + +# +# Common Board Options +# +CONFIG_ARCH_HAVE_LEDS=y +# CONFIG_ARCH_LEDS is not set +CONFIG_NSH_MMCSDMINOR=0 +CONFIG_NSH_MMCSDSLOTNO=0 +CONFIG_NSH_MMCSDSPIPORTNO=3 + +# +# Board-Specific Options +# +CONFIG_HRT_TIMER=y +CONFIG_HRT_PPM=y + +# +# RTOS Features +# +# CONFIG_BOARD_INITIALIZE is not set +CONFIG_MSEC_PER_TICK=1 +CONFIG_RR_INTERVAL=0 +CONFIG_SCHED_INSTRUMENTATION=y +CONFIG_TASK_NAME_SIZE=24 +# CONFIG_SCHED_HAVE_PARENT is not set +# CONFIG_JULIAN_TIME is not set +CONFIG_START_YEAR=1970 +CONFIG_START_MONTH=1 +CONFIG_START_DAY=1 +# CONFIG_DEV_CONSOLE is not set +# CONFIG_MUTEX_TYPES is not set +CONFIG_PRIORITY_INHERITANCE=y +CONFIG_SEM_PREALLOCHOLDERS=0 +CONFIG_SEM_NNESTPRIO=8 +# CONFIG_FDCLONE_DISABLE is not set +CONFIG_FDCLONE_STDIO=y +CONFIG_SDCLONE_DISABLE=y +CONFIG_SCHED_WAITPID=y +# CONFIG_SCHED_STARTHOOK is not set +CONFIG_SCHED_ATEXIT=y +CONFIG_SCHED_ATEXIT_MAX=1 +# CONFIG_SCHED_ONEXIT is not set +CONFIG_USER_ENTRYPOINT="nsh_main" +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_CLOCK is not set +# CONFIG_DISABLE_POSIX_TIMERS is not set +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_DISABLE_SIGNALS is not set +# CONFIG_DISABLE_MQUEUE is not set +# CONFIG_DISABLE_ENVIRON is not set + +# +# Signal Numbers +# +CONFIG_SIG_SIGUSR1=1 +CONFIG_SIG_SIGUSR2=2 +CONFIG_SIG_SIGALARM=3 +CONFIG_SIG_SIGCONDTIMEDOUT=16 +CONFIG_SIG_SIGWORK=4 + +# +# Sizes of configurable things (0 disables) +# +CONFIG_MAX_TASKS=32 +CONFIG_MAX_TASK_ARGS=10 +CONFIG_NPTHREAD_KEYS=4 +CONFIG_NFILE_DESCRIPTORS=32 +CONFIG_NFILE_STREAMS=25 +CONFIG_NAME_MAX=32 +CONFIG_PREALLOC_MQ_MSGS=4 +CONFIG_MQ_MAXMSGSIZE=32 +CONFIG_MAX_WDOGPARMS=2 +CONFIG_PREALLOC_WDOGS=50 +CONFIG_PREALLOC_TIMERS=50 + +# +# Stack and heap information +# +CONFIG_IDLETHREAD_STACKSIZE=6000 +CONFIG_USERMAIN_STACKSIZE=4096 +CONFIG_PTHREAD_STACK_MIN=512 +CONFIG_PTHREAD_STACK_DEFAULT=2048 + +# +# Device Drivers +# +# CONFIG_DISABLE_POLL is not set +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_LOOP is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_PWM is not set +CONFIG_I2C=y +# CONFIG_I2C_SLAVE is not set +CONFIG_I2C_TRANSFER=y +# CONFIG_I2C_WRITEREAD is not set +# CONFIG_I2C_POLLED is not set +# CONFIG_I2C_TRACE is not set +CONFIG_ARCH_HAVE_I2CRESET=y +CONFIG_I2C_RESET=y +CONFIG_SPI=y +# CONFIG_SPI_OWNBUS is not set +CONFIG_SPI_EXCHANGE=y +# CONFIG_SPI_CMDDATA is not set +# CONFIG_RTC is not set +CONFIG_WATCHDOG=y +# CONFIG_ANALOG is not set +# CONFIG_AUDIO_DEVICES is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set +# CONFIG_LCD is not set +CONFIG_MMCSD=y +CONFIG_MMCSD_NSLOTS=1 +# CONFIG_MMCSD_READONLY is not set +# CONFIG_MMCSD_MULTIBLOCK_DISABLE is not set +# CONFIG_MMCSD_MMCSUPPORT is not set +# CONFIG_MMCSD_HAVECARDDETECT is not set +CONFIG_MMCSD_SPI=y +CONFIG_MMCSD_SPICLOCK=24000000 +# CONFIG_MMCSD_SDIO is not set +# CONFIG_MTD is not set +CONFIG_PIPES=y +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +CONFIG_SERIAL=y +# CONFIG_DEV_LOWCONSOLE is not set +CONFIG_SERIAL_REMOVABLE=y +# CONFIG_16550_UART is not set +CONFIG_ARCH_HAVE_UART5=y +CONFIG_ARCH_HAVE_USART1=y +CONFIG_ARCH_HAVE_USART2=y +CONFIG_ARCH_HAVE_USART6=y +CONFIG_MCU_SERIAL=y +CONFIG_STANDARD_SERIAL=y +CONFIG_SERIAL_NPOLLWAITERS=2 +# CONFIG_USART1_SERIAL_CONSOLE is not set +# CONFIG_USART2_SERIAL_CONSOLE is not set +# CONFIG_UART5_SERIAL_CONSOLE is not set +# CONFIG_USART6_SERIAL_CONSOLE is not set +CONFIG_NO_SERIAL_CONSOLE=y + +# +# USART1 Configuration +# +CONFIG_USART1_RXBUFSIZE=512 +CONFIG_USART1_TXBUFSIZE=512 +CONFIG_USART1_BAUD=57600 +CONFIG_USART1_BITS=8 +CONFIG_USART1_PARITY=0 +CONFIG_USART1_2STOP=0 + +# +# USART2 Configuration +# +CONFIG_USART2_RXBUFSIZE=512 +CONFIG_USART2_TXBUFSIZE=512 +CONFIG_USART2_BAUD=57600 +CONFIG_USART2_BITS=8 +CONFIG_USART2_PARITY=0 +CONFIG_USART2_2STOP=0 + +# +# UART5 Configuration +# +CONFIG_UART5_RXBUFSIZE=32 +CONFIG_UART5_TXBUFSIZE=32 +CONFIG_UART5_BAUD=57600 +CONFIG_UART5_BITS=8 +CONFIG_UART5_PARITY=0 +CONFIG_UART5_2STOP=0 + +# +# USART6 Configuration +# +CONFIG_USART6_RXBUFSIZE=512 +CONFIG_USART6_TXBUFSIZE=512 +CONFIG_USART6_BAUD=57600 +CONFIG_USART6_BITS=8 +CONFIG_USART6_PARITY=0 +CONFIG_USART6_2STOP=0 +CONFIG_USBDEV=y + +# +# USB Device Controller Driver Options +# +# CONFIG_USBDEV_ISOCHRONOUS is not set +# CONFIG_USBDEV_DUALSPEED is not set +CONFIG_USBDEV_SELFPOWERED=y +# CONFIG_USBDEV_BUSPOWERED is not set +CONFIG_USBDEV_MAXPOWER=500 +# CONFIG_USBDEV_DMA is not set +# CONFIG_USBDEV_TRACE is not set + +# +# USB Device Class Driver Options +# +# CONFIG_USBDEV_COMPOSITE is not set +# CONFIG_PL2303 is not set +CONFIG_CDCACM=y +CONFIG_CDCACM_CONSOLE=y +CONFIG_CDCACM_EP0MAXPACKET=64 +CONFIG_CDCACM_EPINTIN=1 +CONFIG_CDCACM_EPINTIN_FSSIZE=64 +CONFIG_CDCACM_EPINTIN_HSSIZE=64 +CONFIG_CDCACM_EPBULKOUT=3 +CONFIG_CDCACM_EPBULKOUT_FSSIZE=64 +CONFIG_CDCACM_EPBULKOUT_HSSIZE=512 +CONFIG_CDCACM_EPBULKIN=2 +CONFIG_CDCACM_EPBULKIN_FSSIZE=64 +CONFIG_CDCACM_EPBULKIN_HSSIZE=512 +CONFIG_CDCACM_NWRREQS=4 +CONFIG_CDCACM_NRDREQS=4 +CONFIG_CDCACM_RXBUFSIZE=256 +CONFIG_CDCACM_TXBUFSIZE=256 +CONFIG_CDCACM_VENDORID=0x26ac +CONFIG_CDCACM_PRODUCTID=0x0010 +CONFIG_CDCACM_VENDORSTR="3D Robotics" +CONFIG_CDCACM_PRODUCTSTR="PX4 FMU v1.x" +# CONFIG_USBMSC is not set +# CONFIG_USBHOST is not set +# CONFIG_WIRELESS is not set + +# +# System Logging Device Options +# + +# +# System Logging +# +# CONFIG_RAMLOG is not set + +# +# Networking Support +# +# CONFIG_NET is not set + +# +# File Systems +# + +# +# File system configuration +# +# CONFIG_DISABLE_MOUNTPOINT is not set +# CONFIG_FS_RAMMAP is not set +CONFIG_FS_FAT=y +CONFIG_FAT_LCNAMES=y +CONFIG_FAT_LFN=y +CONFIG_FAT_MAXFNAME=32 +CONFIG_FS_FATTIME=y +# CONFIG_FAT_DMAMEMORY is not set +CONFIG_FS_NXFFS=y +CONFIG_NXFFS_PREALLOCATED=y +CONFIG_NXFFS_ERASEDSTATE=0xff +CONFIG_NXFFS_PACKTHRESHOLD=32 +CONFIG_NXFFS_MAXNAMLEN=32 +CONFIG_NXFFS_TAILTHRESHOLD=2048 +CONFIG_FS_ROMFS=y +# CONFIG_FS_SMARTFS is not set +CONFIG_FS_BINFS=y + +# +# System Logging +# +# CONFIG_SYSLOG_ENABLE is not set +CONFIG_SYSLOG=y +CONFIG_SYSLOG_CHAR=y +CONFIG_SYSLOG_DEVPATH="/dev/ttyS0" + +# +# Graphics Support +# +# CONFIG_NX is not set + +# +# Memory Management +# +# CONFIG_MM_MULTIHEAP is not set +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=2 +CONFIG_GRAN=y +CONFIG_GRAN_SINGLE=y +CONFIG_GRAN_INTR=y + +# +# Audio Support +# +# CONFIG_AUDIO is not set + +# +# Binary Formats +# +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_BINFMT_EXEPATH is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +CONFIG_BUILTIN=y +# CONFIG_PIC is not set +# CONFIG_SYMTAB_ORDEREDBYNAME is not set + +# +# Library Routines +# + +# +# Standard C Library Options +# +CONFIG_STDIO_BUFFER_SIZE=256 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=2 +CONFIG_LIB_HOMEDIR="/" +# CONFIG_NOPRINTF_FIELDWIDTH is not set +CONFIG_LIBC_FLOATINGPOINT=y +CONFIG_LIB_RAND_ORDER=1 +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_EXECFUNCS is not set +CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 +CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048 +CONFIG_LIBC_STRERROR=y +# CONFIG_LIBC_STRERROR_SHORT is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +CONFIG_ARCH_OPTIMIZED_FUNCTIONS=y +CONFIG_ARCH_MEMCPY=y +# CONFIG_ARCH_MEMCMP is not set +# CONFIG_ARCH_MEMMOVE is not set +# CONFIG_ARCH_MEMSET is not set +# CONFIG_MEMSET_OPTSPEED is not set +# CONFIG_ARCH_STRCHR is not set +# CONFIG_ARCH_STRCMP is not set +# CONFIG_ARCH_STRCPY is not set +# CONFIG_ARCH_STRNCPY is not set +# CONFIG_ARCH_STRLEN is not set +# CONFIG_ARCH_STRNLEN is not set +# CONFIG_ARCH_BZERO is not set + +# +# Non-standard Library Support +# +CONFIG_SCHED_WORKQUEUE=y +CONFIG_SCHED_HPWORK=y +CONFIG_SCHED_WORKPRIORITY=192 +CONFIG_SCHED_WORKPERIOD=5000 +CONFIG_SCHED_WORKSTACKSIZE=2048 +CONFIG_SCHED_LPWORK=y +CONFIG_SCHED_LPWORKPRIORITY=50 +CONFIG_SCHED_LPWORKPERIOD=50000 +CONFIG_SCHED_LPWORKSTACKSIZE=2048 +# CONFIG_LIB_KBDCODEC is not set +# CONFIG_LIB_SLCDCODEC is not set + +# +# Basic CXX Support +# +# CONFIG_C99_BOOL8 is not set +CONFIG_HAVE_CXX=y +CONFIG_HAVE_CXXINITIALIZE=y +# CONFIG_CXX_NEWLONG is not set + +# +# uClibc++ Standard C++ Library +# +# CONFIG_UCLIBCXX is not set + +# +# Application Configuration +# + +# +# Built-In Applications +# +CONFIG_BUILTIN_PROXY_STACKSIZE=1024 + +# +# Examples +# +# CONFIG_EXAMPLES_BUTTONS is not set +# CONFIG_EXAMPLES_CAN is not set +CONFIG_EXAMPLES_CDCACM=y +# CONFIG_EXAMPLES_COMPOSITE is not set +# CONFIG_EXAMPLES_CXXTEST is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HELLOXX is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_KEYPADTEST is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_LCDRW is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MODBUS is not set +CONFIG_EXAMPLES_MOUNT=y +CONFIG_EXAMPLES_NSH=y +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXCONSOLE is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXFLAT is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTEXT is not set +# CONFIG_EXAMPLES_OSTEST is not set +# CONFIG_EXAMPLES_PASHELLO is not set +# CONFIG_EXAMPLES_PIPE is not set +# CONFIG_EXAMPLES_POSIXSPAWN is not set +# CONFIG_EXAMPLES_QENCODER is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_ROMFS is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_SLCD is not set +# CONFIG_EXAMPLES_SMART_TEST is not set +# CONFIG_EXAMPLES_SMART is not set +# CONFIG_EXAMPLES_TCPECHO is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_THTTPD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_UDP is not set +# CONFIG_EXAMPLES_UIP is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_EXAMPLES_USBMSC is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set + +# +# Graphics Support +# +# CONFIG_TIFF is not set + +# +# Interpreters +# +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set + +# +# Network Utilities +# + +# +# Networking Utilities +# +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_DHCPC is not set +# CONFIG_NETUTILS_DHCPD is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_FTPD is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_RESOLV is not set +# CONFIG_NETUTILS_SMTP is not set +# CONFIG_NETUTILS_TELNETD is not set +# CONFIG_NETUTILS_TFTPC is not set +# CONFIG_NETUTILS_THTTPD is not set +# CONFIG_NETUTILS_UIPLIB is not set +# CONFIG_NETUTILS_WEBCLIENT is not set + +# +# FreeModBus +# +# CONFIG_MODBUS is not set + +# +# NSH Library +# +CONFIG_NSH_LIBRARY=y +CONFIG_NSH_BUILTIN_APPS=y + +# +# Disable Individual commands +# +# CONFIG_NSH_DISABLE_CAT is not set +# CONFIG_NSH_DISABLE_CD is not set +# CONFIG_NSH_DISABLE_CP is not set +# CONFIG_NSH_DISABLE_DD is not set +# CONFIG_NSH_DISABLE_ECHO is not set +# CONFIG_NSH_DISABLE_EXEC is not set +# CONFIG_NSH_DISABLE_EXIT is not set +# CONFIG_NSH_DISABLE_FREE is not set +# CONFIG_NSH_DISABLE_GET is not set +# CONFIG_NSH_DISABLE_HELP is not set +# CONFIG_NSH_DISABLE_HEXDUMP is not set +# CONFIG_NSH_DISABLE_IFCONFIG is not set +# CONFIG_NSH_DISABLE_KILL is not set +# CONFIG_NSH_DISABLE_LOSETUP is not set +# CONFIG_NSH_DISABLE_LS is not set +# CONFIG_NSH_DISABLE_MB is not set +# CONFIG_NSH_DISABLE_MKDIR is not set +# CONFIG_NSH_DISABLE_MKFATFS is not set +# CONFIG_NSH_DISABLE_MKFIFO is not set +# CONFIG_NSH_DISABLE_MKRD is not set +# CONFIG_NSH_DISABLE_MH is not set +# CONFIG_NSH_DISABLE_MOUNT is not set +# CONFIG_NSH_DISABLE_MW is not set +# CONFIG_NSH_DISABLE_NSFMOUNT is not set +# CONFIG_NSH_DISABLE_PS is not set +# CONFIG_NSH_DISABLE_PING is not set +# CONFIG_NSH_DISABLE_PUT is not set +# CONFIG_NSH_DISABLE_PWD is not set +# CONFIG_NSH_DISABLE_RM is not set +# CONFIG_NSH_DISABLE_RMDIR is not set +# CONFIG_NSH_DISABLE_SET is not set +# CONFIG_NSH_DISABLE_SH is not set +# CONFIG_NSH_DISABLE_SLEEP is not set +# CONFIG_NSH_DISABLE_TEST is not set +# CONFIG_NSH_DISABLE_UMOUNT is not set +# CONFIG_NSH_DISABLE_UNSET is not set +# CONFIG_NSH_DISABLE_USLEEP is not set +# CONFIG_NSH_DISABLE_WGET is not set +# CONFIG_NSH_DISABLE_XD is not set + +# +# Configure Command Options +# +# CONFIG_NSH_CMDOPT_DF_H is not set +CONFIG_NSH_CODECS_BUFSIZE=128 +CONFIG_NSH_FILEIOSIZE=512 +CONFIG_NSH_STRERROR=y +CONFIG_NSH_LINELEN=128 +CONFIG_NSH_MAXARGUMENTS=12 +CONFIG_NSH_NESTDEPTH=8 +# CONFIG_NSH_DISABLESCRIPT is not set +# CONFIG_NSH_DISABLEBG is not set +CONFIG_NSH_ROMFSETC=y +# CONFIG_NSH_ROMFSRC is not set +CONFIG_NSH_ROMFSMOUNTPT="/etc" +CONFIG_NSH_INITSCRIPT="init.d/rcS" +CONFIG_NSH_ROMFSDEVNO=0 +CONFIG_NSH_ROMFSSECTSIZE=128 +CONFIG_NSH_ARCHROMFS=y +CONFIG_NSH_FATDEVNO=1 +CONFIG_NSH_FATSECTSIZE=512 +CONFIG_NSH_FATNSECTORS=1024 +CONFIG_NSH_FATMOUNTPT="/tmp" +CONFIG_NSH_CONSOLE=y +# CONFIG_NSH_USBCONSOLE is not set + +# +# USB Trace Support +# +# CONFIG_NSH_CONDEV is not set +CONFIG_NSH_ARCHINIT=y + +# +# NxWidgets/NxWM +# + +# +# System NSH Add-Ons +# + +# +# Custom Free Memory Command +# +# CONFIG_SYSTEM_FREE is not set + +# +# I2C tool +# +# CONFIG_SYSTEM_I2CTOOL is not set + +# +# FLASH Program Installation +# +# CONFIG_SYSTEM_INSTALL is not set + +# +# FLASH Erase-all Command +# + +# +# readline() +# +CONFIG_SYSTEM_READLINE=y +CONFIG_READLINE_ECHO=y + +# +# Power Off +# +# CONFIG_SYSTEM_POWEROFF is not set + +# +# RAMTRON +# +# CONFIG_SYSTEM_RAMTRON is not set + +# +# SD Card +# +# CONFIG_SYSTEM_SDCARD is not set + +# +# Sysinfo +# +CONFIG_SYSTEM_SYSINFO=y + +# +# USB Monitor +# diff --git a/nuttx-configs/px4fmu-v1/nsh/setenv.sh b/nuttx-configs/px4fmu-v1/nsh/setenv.sh new file mode 100755 index 000000000..db372217c --- /dev/null +++ b/nuttx-configs/px4fmu-v1/nsh/setenv.sh @@ -0,0 +1,75 @@ +#!/bin/bash +# configs/px4fmu-v1/usbnsh/setenv.sh +# +# Copyright (C) 2013 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# + +if [ "$_" = "$0" ] ; then + echo "You must source this script, not run it!" 1>&2 + exit 1 +fi + +WD=`pwd` +if [ ! -x "setenv.sh" ]; then + echo "This script must be executed from the top-level NuttX build directory" + exit 1 +fi + +if [ -z "${PATH_ORIG}" ]; then + export PATH_ORIG="${PATH}" +fi + +# This is the Cygwin path to the location where I installed the RIDE +# toolchain under windows. You will also have to edit this if you install +# the RIDE toolchain in any other location +#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin" + +# This is the Cygwin path to the location where I installed the CodeSourcery +# toolchain under windows. You will also have to edit this if you install +# the CodeSourcery toolchain in any other location +export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin" + +# These are the Cygwin paths to the locations where I installed the Atollic +# toolchain under windows. You will also have to edit this if you install +# the Atollic toolchain in any other location. /usr/bin is added before +# the Atollic bin path because there is are binaries named gcc.exe and g++.exe +# at those locations as well. +#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin" +#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin" + +# This is the Cygwin path to the location where I build the buildroot +# toolchain. +#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin" + +# Add the path to the toolchain to the PATH varialble +export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" + +echo "PATH : ${PATH}" diff --git a/nuttx-configs/px4fmu-v1/scripts/ld.script b/nuttx-configs/px4fmu-v1/scripts/ld.script new file mode 100644 index 000000000..ced5b21b7 --- /dev/null +++ b/nuttx-configs/px4fmu-v1/scripts/ld.script @@ -0,0 +1,149 @@ +/**************************************************************************** + * configs/px4fmu-v1/scripts/ld.script + * + * Copyright (C) 2011 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/* The STM32F405RG has 1024Kb of FLASH beginning at address 0x0800:0000 and + * 192Kb of SRAM. SRAM is split up into three blocks: + * + * 1) 112Kb of SRAM beginning at address 0x2000:0000 + * 2) 16Kb of SRAM beginning at address 0x2001:c000 + * 3) 64Kb of CCM SRAM beginning at address 0x1000:0000 + * + * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000 + * where the code expects to begin execution by jumping to the entry point in + * the 0x0800:0000 address range. + * + * The first 0x4000 of flash is reserved for the bootloader. + */ + +MEMORY +{ + flash (rx) : ORIGIN = 0x08004000, LENGTH = 1008K + sram (rwx) : ORIGIN = 0x20000000, LENGTH = 128K + ccsram (rwx) : ORIGIN = 0x10000000, LENGTH = 64K +} + +OUTPUT_ARCH(arm) + +ENTRY(__start) /* treat __start as the anchor for dead code stripping */ +EXTERN(_vectors) /* force the vectors to be included in the output */ + +/* + * Ensure that abort() is present in the final object. The exception handling + * code pulled in by libgcc.a requires it (and that code cannot be easily avoided). + */ +EXTERN(abort) + +SECTIONS +{ + .text : { + _stext = ABSOLUTE(.); + *(.vectors) + *(.text .text.*) + *(.fixup) + *(.gnu.warning) + *(.rodata .rodata.*) + *(.gnu.linkonce.t.*) + *(.got) + *(.gcc_except_table) + *(.gnu.linkonce.r.*) + _etext = ABSOLUTE(.); + + /* + * This is a hack to make the newlib libm __errno() call + * use the NuttX get_errno_ptr() function. + */ + __errno = get_errno_ptr; + } > flash + + /* + * Init functions (static constructors and the like) + */ + .init_section : { + _sinit = ABSOLUTE(.); + KEEP(*(.init_array .init_array.*)) + _einit = ABSOLUTE(.); + } > flash + + /* + * Construction data for parameters. + */ + __param ALIGN(4): { + __param_start = ABSOLUTE(.); + KEEP(*(__param*)) + __param_end = ABSOLUTE(.); + } > flash + + .ARM.extab : { + *(.ARM.extab*) + } > flash + + __exidx_start = ABSOLUTE(.); + .ARM.exidx : { + *(.ARM.exidx*) + } > flash + __exidx_end = ABSOLUTE(.); + + _eronly = ABSOLUTE(.); + + .data : { + _sdata = ABSOLUTE(.); + *(.data .data.*) + *(.gnu.linkonce.d.*) + CONSTRUCTORS + _edata = ABSOLUTE(.); + } > sram AT > flash + + .bss : { + _sbss = ABSOLUTE(.); + *(.bss .bss.*) + *(.gnu.linkonce.b.*) + *(COMMON) + _ebss = ABSOLUTE(.); + } > sram + + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_info 0 : { *(.debug_info) } + .debug_line 0 : { *(.debug_line) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_aranges 0 : { *(.debug_aranges) } +} diff --git a/nuttx-configs/px4fmu-v1/src/Makefile b/nuttx-configs/px4fmu-v1/src/Makefile new file mode 100644 index 000000000..6ef8b7d6a --- /dev/null +++ b/nuttx-configs/px4fmu-v1/src/Makefile @@ -0,0 +1,84 @@ +############################################################################ +# configs/px4fmu-v1/src/Makefile +# +# Copyright (C) 2013 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +-include $(TOPDIR)/Make.defs + +CFLAGS += -I$(TOPDIR)/sched + +ASRCS = +AOBJS = $(ASRCS:.S=$(OBJEXT)) + +CSRCS = empty.c +COBJS = $(CSRCS:.c=$(OBJEXT)) + +SRCS = $(ASRCS) $(CSRCS) +OBJS = $(AOBJS) $(COBJS) + +ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src +ifeq ($(WINTOOL),y) + CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \ + -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \ + -I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}" +else + CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m +endif + +all: libboard$(LIBEXT) + +$(AOBJS): %$(OBJEXT): %.S + $(call ASSEMBLE, $<, $@) + +$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c + $(call COMPILE, $<, $@) + +libboard$(LIBEXT): $(OBJS) + $(call ARCHIVE, $@, $(OBJS)) + +.depend: Makefile $(SRCS) + $(Q) $(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep + $(Q) touch $@ + +depend: .depend + +clean: + $(call DELFILE, libboard$(LIBEXT)) + $(call CLEAN) + +distclean: clean + $(call DELFILE, Make.dep) + $(call DELFILE, .depend) + +-include Make.dep + diff --git a/nuttx-configs/px4fmu-v1/src/empty.c b/nuttx-configs/px4fmu-v1/src/empty.c new file mode 100644 index 000000000..ace900866 --- /dev/null +++ b/nuttx-configs/px4fmu-v1/src/empty.c @@ -0,0 +1,4 @@ +/* + * There are no source files here, but libboard.a can't be empty, so + * we have this empty source file to keep it company. + */ diff --git a/nuttx-configs/px4io-v1/include/README.txt b/nuttx-configs/px4io-v1/include/README.txt new file mode 100755 index 000000000..2264a80aa --- /dev/null +++ b/nuttx-configs/px4io-v1/include/README.txt @@ -0,0 +1 @@ +This directory contains header files unique to the PX4IO board. diff --git a/nuttx-configs/px4io-v1/include/board.h b/nuttx-configs/px4io-v1/include/board.h new file mode 100755 index 000000000..668602ea8 --- /dev/null +++ b/nuttx-configs/px4io-v1/include/board.h @@ -0,0 +1,172 @@ +/************************************************************************************ + * configs/px4io/include/board.h + * include/arch/board/board.h + * + * Copyright (C) 2009 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#ifndef __ARCH_BOARD_BOARD_H +#define __ARCH_BOARD_BOARD_H + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include <nuttx/config.h> +#ifndef __ASSEMBLY__ +# include <stdint.h> +# include <stdbool.h> +#endif +#include <stm32_rcc.h> +#include <stm32_sdio.h> +#include <stm32.h> + +/************************************************************************************ + * Definitions + ************************************************************************************/ + +/* Clocking *************************************************************************/ + +/* On-board crystal frequency is 24MHz (HSE) */ + +#define STM32_BOARD_XTAL 24000000ul + +/* Use the HSE output as the system clock */ + +#define STM32_SYSCLK_SW RCC_CFGR_SW_HSE +#define STM32_SYSCLK_SWS RCC_CFGR_SWS_HSE +#define STM32_SYSCLK_FREQUENCY STM32_BOARD_XTAL + +/* AHB clock (HCLK) is SYSCLK (24MHz) */ + +#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK +#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY +#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */ + +/* APB2 clock (PCLK2) is HCLK (24MHz) */ + +#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK +#define STM32_PCLK2_FREQUENCY STM32_HCLK_FREQUENCY +#define STM32_APB2_CLKIN (STM32_PCLK2_FREQUENCY) /* Timers 2-4 */ + +/* APB2 timer 1 will receive PCLK2. */ + +#define STM32_APB2_TIM1_CLKIN (STM32_PCLK2_FREQUENCY) +#define STM32_APB2_TIM8_CLKIN (STM32_PCLK2_FREQUENCY) + +/* APB1 clock (PCLK1) is HCLK (24MHz) */ + +#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLK +#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY) + +/* All timers run off PCLK */ + +#define STM32_APB1_TIM1_CLKIN (STM32_PCLK2_FREQUENCY) +#define STM32_APB1_TIM2_CLKIN (STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM3_CLKIN (STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM4_CLKIN (STM32_PCLK1_FREQUENCY) + +/* + * Some of the USART pins are not available; override the GPIO + * definitions with an invalid pin configuration. + */ +#undef GPIO_USART2_CTS +#define GPIO_USART2_CTS 0xffffffff +#undef GPIO_USART2_RTS +#define GPIO_USART2_RTS 0xffffffff +#undef GPIO_USART2_CK +#define GPIO_USART2_CK 0xffffffff +#undef GPIO_USART3_TX +#define GPIO_USART3_TX 0xffffffff +#undef GPIO_USART3_CK +#define GPIO_USART3_CK 0xffffffff +#undef GPIO_USART3_CTS +#define GPIO_USART3_CTS 0xffffffff +#undef GPIO_USART3_RTS +#define GPIO_USART3_RTS 0xffffffff + +/* + * High-resolution timer + */ +#ifdef CONFIG_HRT_TIMER +# define HRT_TIMER 1 /* use timer1 for the HRT */ +# define HRT_TIMER_CHANNEL 2 /* use capture/compare channel 2 */ +#endif + +/* + * PPM + * + * PPM input is handled by the HRT timer. + * + * Pin is PA8, timer 1, channel 1 + */ +#if defined(CONFIG_HRT_TIMER) && defined (CONFIG_HRT_PPM) +# define HRT_PPM_CHANNEL 1 /* use capture/compare channel 1 */ +# define GPIO_PPM_IN GPIO_TIM1_CH1IN +#endif + +/************************************************************************************ + * Public Data + ************************************************************************************/ + +#ifndef __ASSEMBLY__ + +#undef EXTERN +#if defined(__cplusplus) +#define EXTERN extern "C" +extern "C" { +#else +#define EXTERN extern +#endif + +/************************************************************************************ + * Public Function Prototypes + ************************************************************************************/ +/************************************************************************************ + * Name: stm32_boardinitialize + * + * Description: + * All STM32 architectures must provide the following entry point. This entry point + * is called early in the intitialization -- after all memory has been configured + * and mapped but before any devices have been initialized. + * + ************************************************************************************/ + +EXTERN void stm32_boardinitialize(void); + +#if defined(__cplusplus) +} +#endif + +#endif /* __ASSEMBLY__ */ +#endif /* __ARCH_BOARD_BOARD_H */ diff --git a/nuttx-configs/px4io-v1/nsh/Make.defs b/nuttx-configs/px4io-v1/nsh/Make.defs new file mode 100644 index 000000000..712631f47 --- /dev/null +++ b/nuttx-configs/px4io-v1/nsh/Make.defs @@ -0,0 +1,166 @@ +############################################################################ +# configs/px4io-v1/nsh/Make.defs +# +# Copyright (C) 2011 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +include ${TOPDIR}/.config +include ${TOPDIR}/tools/Config.mk + +# +# We only support building with the ARM bare-metal toolchain from +# https://launchpad.net/gcc-arm-embedded on Windows, Linux or Mac OS. +# +CONFIG_ARMV7M_TOOLCHAIN := GNU_EABI + +include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs + +CC = $(CROSSDEV)gcc +CXX = $(CROSSDEV)g++ +CPP = $(CROSSDEV)gcc -E +LD = $(CROSSDEV)ld +AR = $(CROSSDEV)ar rcs +NM = $(CROSSDEV)nm +OBJCOPY = $(CROSSDEV)objcopy +OBJDUMP = $(CROSSDEV)objdump + +MAXOPTIMIZATION = -O3 +ARCHCPUFLAGS = -mcpu=cortex-m3 \ + -mthumb \ + -march=armv7-m + +# use our linker script +LDSCRIPT = ld.script + +ifeq ($(WINTOOL),y) + # Windows-native toolchains + DIRLINK = $(TOPDIR)/tools/copydir.sh + DIRUNLINK = $(TOPDIR)/tools/unlink.sh + MKDEP = $(TOPDIR)/tools/mknulldeps.sh + ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" + ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" +else + ifeq ($(PX4_WINTOOL),y) + # Windows-native toolchains (MSYS) + DIRLINK = $(TOPDIR)/tools/copydir.sh + DIRUNLINK = $(TOPDIR)/tools/unlink.sh + MKDEP = $(TOPDIR)/tools/mknulldeps.sh + ARCHINCLUDES = -I. -isystem $(TOPDIR)/include + ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) + else + # Linux/Cygwin-native toolchain + MKDEP = $(TOPDIR)/tools/mkdeps.sh + ARCHINCLUDES = -I. -isystem $(TOPDIR)/include + ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) + endif +endif + +# tool versions +ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} +ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} + +# optimisation flags +ARCHOPTIMIZATION = $(MAXOPTIMIZATION) \ + -fno-strict-aliasing \ + -fno-strength-reduce \ + -fomit-frame-pointer \ + -funsafe-math-optimizations \ + -fno-builtin-printf \ + -ffunction-sections \ + -fdata-sections + +ifeq ("${CONFIG_DEBUG_SYMBOLS}","y") +ARCHOPTIMIZATION += -g +endif + +ARCHCFLAGS = -std=gnu99 +ARCHCXXFLAGS = -fno-exceptions -fno-rtti -std=gnu++0x +ARCHWARNINGS = -Wall \ + -Wextra \ + -Wdouble-promotion \ + -Wshadow \ + -Wfloat-equal \ + -Wframe-larger-than=1024 \ + -Wpointer-arith \ + -Wlogical-op \ + -Wmissing-declarations \ + -Wpacked \ + -Wno-unused-parameter +# -Wcast-qual - generates spurious noreturn attribute warnings, try again later +# -Wconversion - would be nice, but too many "risky-but-safe" conversions in the code +# -Wcast-align - would help catch bad casts in some cases, but generates too many false positives + +ARCHCWARNINGS = $(ARCHWARNINGS) \ + -Wbad-function-cast \ + -Wstrict-prototypes \ + -Wold-style-declaration \ + -Wmissing-parameter-type \ + -Wmissing-prototypes \ + -Wnested-externs \ + -Wunsuffixed-float-constants +ARCHWARNINGSXX = $(ARCHWARNINGS) +ARCHDEFINES = +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 + +# this seems to be the only way to add linker flags +EXTRA_LIBS += --warn-common \ + --gc-sections + +CFLAGS = $(ARCHCFLAGS) $(ARCHCWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -fno-common +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) +CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) +CPPFLAGS = $(ARCHINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES) +AFLAGS = $(CFLAGS) -D__ASSEMBLY__ + +NXFLATLDFLAGS1 = -r -d -warn-common +NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections +LDNXFLATFLAGS = -e main -s 2048 + +OBJEXT = .o +LIBEXT = .a +EXEEXT = + +# produce partially-linked $1 from files in $2 +define PRELINK + @echo "PRELINK: $1" + $(Q) $(LD) -Ur -o $1 $2 && $(OBJCOPY) --localize-hidden $1 +endef + +HOSTCC = gcc +HOSTINCLUDES = -I. +HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe +HOSTLDFLAGS = + diff --git a/nuttx-configs/px4io-v1/nsh/appconfig b/nuttx-configs/px4io-v1/nsh/appconfig new file mode 100644 index 000000000..48a41bcdb --- /dev/null +++ b/nuttx-configs/px4io-v1/nsh/appconfig @@ -0,0 +1,32 @@ +############################################################################ +# +# Copyright (C) 2012 PX4 Development Team. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name PX4 nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ diff --git a/nuttx-configs/px4io-v1/nsh/defconfig b/nuttx-configs/px4io-v1/nsh/defconfig new file mode 100755 index 000000000..525672233 --- /dev/null +++ b/nuttx-configs/px4io-v1/nsh/defconfig @@ -0,0 +1,559 @@ +############################################################################ +# configs/px4io-v1/nsh/defconfig +# +# Copyright (C) 2012 PX4 Development Team. All rights reserved. +# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ +# +# architecture selection +# +# CONFIG_ARCH - identifies the arch subdirectory and, hence, the +# processor architecture. +# CONFIG_ARCH_family - for use in C code. This identifies the +# particular chip family that the architecture is implemented +# in. +# CONFIG_ARCH_architecture - for use in C code. This identifies the +# specific architecture within the chip family. +# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory +# CONFIG_ARCH_CHIP_name - For use in C code +# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence, +# the board that supports the particular chip or SoC. +# CONFIG_ARCH_BOARD_name - for use in C code +# CONFIG_ENDIAN_BIG - define if big endian (default is little endian) +# CONFIG_BOARD_LOOPSPERMSEC - for delay loops +# CONFIG_DRAM_SIZE - Describes the installed DRAM. +# CONFIG_DRAM_START - The start address of DRAM (physical) +# CONFIG_ARCH_IRQPRIO - The ST32F100CB supports interrupt prioritization +# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt +# stack. If defined, this symbol is the size of the interrupt +# stack in bytes. If not defined, the user task stacks will be +# used during interrupt handling. +# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions +# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader. +# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. +# CONFIG_ARCH_BUTTONS - Enable support for buttons. Unique to board architecture. +# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that +# cause a 100 second delay during boot-up. This 100 second delay +# serves no purpose other than it allows you to calibrate +# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure +# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until +# the delay actually is 100 seconds. +# CONFIG_ARCH_DMA - Support DMA initialization +# +CONFIG_ARCH="arm" +CONFIG_ARCH_ARM=y +CONFIG_ARCH_CORTEXM3=y +CONFIG_ARCH_CHIP="stm32" +CONFIG_ARCH_CHIP_STM32F100C8=y +# +# Board Selection +# +CONFIG_ARCH_BOARD_PX4IO_V1=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="px4io-v1" +CONFIG_BOARD_LOOPSPERMSEC=2000 +CONFIG_DRAM_SIZE=0x00002000 +CONFIG_DRAM_START=0x20000000 +CONFIG_ARCH_IRQPRIO=y +CONFIG_ARCH_INTERRUPTSTACK=n +CONFIG_ARCH_STACKDUMP=y +CONFIG_ARCH_BOOTLOADER=n +CONFIG_ARCH_LEDS=n +CONFIG_ARCH_BUTTONS=n +CONFIG_ARCH_CALIBRATION=n +CONFIG_ARCH_DMA=y +CONFIG_ARCH_MATH_H=y + +CONFIG_ARMV7M_CMNVECTOR=y +# CONFIG_ARMV7M_STACKCHECK is not set + +# +# JTAG Enable settings (by default JTAG-DP and SW-DP are disabled): +# +# CONFIG_STM32_DFU - Use the DFU bootloader, not JTAG +# +# JTAG Enable options: +# +# CONFIG_STM32_JTAG_FULL_ENABLE - Enables full SWJ (JTAG-DP + SW-DP) +# CONFIG_STM32_JTAG_NOJNTRST_ENABLE - Enables full SWJ (JTAG-DP + SW-DP) +# but without JNTRST. +# CONFIG_STM32_JTAG_SW_ENABLE - Set JTAG-DP disabled and SW-DP enabled +# +CONFIG_STM32_DFU=n +CONFIG_STM32_JTAG_FULL_ENABLE=y +CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n +CONFIG_STM32_JTAG_SW_ENABLE=n + +# +# Individual subsystems can be enabled: +# +# AHB: +CONFIG_STM32_DMA1=y +CONFIG_STM32_DMA2=n +CONFIG_STM32_CRC=n +# APB1: +# Timers 2,3 and 4 are owned by the PWM driver +CONFIG_STM32_TIM2=n +CONFIG_STM32_TIM3=n +CONFIG_STM32_TIM4=n +CONFIG_STM32_TIM5=n +CONFIG_STM32_TIM6=n +CONFIG_STM32_TIM7=n +CONFIG_STM32_WWDG=n +CONFIG_STM32_SPI2=n +CONFIG_STM32_USART2=y +CONFIG_STM32_USART3=y +CONFIG_STM32_I2C1=y +CONFIG_STM32_I2C2=n +CONFIG_STM32_BKP=n +CONFIG_STM32_PWR=n +CONFIG_STM32_DAC=n +# APB2: +# We use our own ADC driver, but leave this on for clocking purposes. +CONFIG_STM32_ADC1=y +CONFIG_STM32_ADC2=n +# TIM1 is owned by the HRT +CONFIG_STM32_TIM1=n +CONFIG_STM32_SPI1=n +CONFIG_STM32_TIM8=n +CONFIG_STM32_USART1=y +CONFIG_STM32_ADC3=n + + +# +# STM32F100 specific serial device driver settings +# +# CONFIG_USARTn_SERIAL_CONSOLE - selects the USARTn for the +# console and ttys0 (default is the USART1). +# CONFIG_USARTn_RXBUFSIZE - Characters are buffered as received. +# This specific the size of the receive buffer +# CONFIG_USARTn_TXBUFSIZE - Characters are buffered before +# being sent. This specific the size of the transmit buffer +# CONFIG_USARTn_BAUD - The configure BAUD of the UART. Must be +# CONFIG_USARTn_BITS - The number of bits. Must be either 7 or 8. +# CONFIG_USARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity +# CONFIG_USARTn_2STOP - Two stop bits +# +CONFIG_SERIAL_TERMIOS=y +CONFIG_STANDARD_SERIAL=y + +CONFIG_USART1_SERIAL_CONSOLE=y +CONFIG_USART2_SERIAL_CONSOLE=n +CONFIG_USART3_SERIAL_CONSOLE=n + +CONFIG_USART1_TXBUFSIZE=64 +CONFIG_USART2_TXBUFSIZE=64 +CONFIG_USART3_TXBUFSIZE=64 + +CONFIG_USART1_RXBUFSIZE=64 +CONFIG_USART2_RXBUFSIZE=64 +CONFIG_USART3_RXBUFSIZE=64 + +CONFIG_USART1_BAUD=115200 +CONFIG_USART2_BAUD=115200 +CONFIG_USART3_BAUD=115200 + +CONFIG_USART1_BITS=8 +CONFIG_USART2_BITS=8 +CONFIG_USART3_BITS=8 + +CONFIG_USART1_PARITY=0 +CONFIG_USART2_PARITY=0 +CONFIG_USART3_PARITY=0 + +CONFIG_USART1_2STOP=0 +CONFIG_USART2_2STOP=0 +CONFIG_USART3_2STOP=0 + +CONFIG_USART1_RXDMA=y +SERIAL_HAVE_CONSOLE_DMA=y +# Conflicts with I2C1 DMA +CONFIG_USART2_RXDMA=n +CONFIG_USART3_RXDMA=y + +# +# PX4IO specific driver settings +# +# CONFIG_HRT_TIMER +# Enables the high-resolution timer. The board definition must +# set HRT_TIMER and HRT_TIMER_CHANNEL to the timer and capture/ +# compare channels to be used. +# CONFIG_HRT_PPM +# Enables R/C PPM input using the HRT. The board definition must +# set HRT_PPM_CHANNEL to the timer capture/compare channel to be +# used, and define GPIO_PPM_IN to configure the appropriate timer +# GPIO. +# CONFIG_PWM_SERVO +# Enables the PWM servo driver. The driver configuration must be +# supplied by the board support at initialisation time. +# Note that USART2 must be disabled on the PX4 board for this to +# be available. +# +# +CONFIG_HRT_TIMER=y +CONFIG_HRT_PPM=y + +# +# General build options +# +# CONFIG_RRLOAD_BINARY - make the rrload binary format used with +# BSPs from www.ridgerun.com using the tools/mkimage.sh script +# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format +# used with many different loaders using the GNU objcopy program +# Should not be selected if you are not using the GNU toolchain. +# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format +# used with many different loaders using the GNU objcopy program +# Should not be selected if you are not using the GNU toolchain. +# CONFIG_RAW_BINARY - make a raw binary format file used with many +# different loaders using the GNU objcopy program. This option +# should not be selected if you are not using the GNU toolchain. +# CONFIG_HAVE_LIBM - toolchain supports libm.a +# +CONFIG_RRLOAD_BINARY=n +CONFIG_INTELHEX_BINARY=n +CONFIG_MOTOROLA_SREC=n +CONFIG_RAW_BINARY=y +CONFIG_HAVE_LIBM=n + +# +# General OS setup +# +# CONFIG_APPS_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. Default: ../apps +# CONFIG_DEBUG - enables built-in debug options +# CONFIG_DEBUG_VERBOSE - enables verbose debug output +# CONFIG_DEBUG_SYMBOLS - build without optimization and with +# debug symbols (needed for use with a debugger). +# CONFIG_HAVE_CXX - Enable support for C++ +# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support +# for initialization of static C++ instances for this architecture +# and for the selected toolchain (via up_cxxinitialize()). +# CONFIG_MM_REGIONS - If the architecture includes multiple +# regions of memory to allocate from, this specifies the +# number of memory regions that the memory manager must +# handle and enables the API mm_addregion(start, end); +# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot +# time console output +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to +# inform NuttX that the processor hardware is providing +# system timer interrupts at some interrupt interval other +# than 10 msec. +# CONFIG_RR_INTERVAL - The round robin timeslice will be set +# this number of milliseconds; Round robin scheduling can +# be disabled by setting this value to zero. +# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in +# scheduler to monitor system performance +# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a +# task name to save in the TCB. Useful if scheduler +# instrumentation is selected. Set to zero to disable. +# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY - +# Used to initialize the internal time logic. +# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions. +# You would only need this if you are concerned about accurate +# time conversions in the past or in the distant future. +# CONFIG_JULIAN_TIME - Enables Julian time conversions. You +# would only need this if you are concerned about accurate +# time conversion in the distand past. You must also define +# CONFIG_GREGORIAN_TIME in order to use Julian time. +# CONFIG_DEV_CONSOLE - Set if architecture-specific logic +# provides /dev/console. Enables stdout, stderr, stdin. +# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console +# driver (minimul support) +# CONFIG_MUTEX_TYPES: Set to enable support for recursive and +# errorcheck mutexes. Enables pthread_mutexattr_settype(). +# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority +# inheritance on mutexes and semaphores. +# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority +# inheritance is enabled. It defines the maximum number of +# different threads (minus one) that can take counts on a +# semaphore with priority inheritance support. This may be +# set to zero if priority inheritance is disabled OR if you +# are only using semaphores as mutexes (only one holder) OR +# if no more than two threads participate using a counting +# semaphore. +# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled, +# then this setting is the maximum number of higher priority +# threads (minus 1) than can be waiting for another thread +# to release a count on a semaphore. This value may be set +# to zero if no more than one thread is expected to wait for +# a semaphore. +# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors +# by task_create() when a new task is started. If set, all +# files/drivers will appear to be closed in the new task. +# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first +# three file descriptors (stdin, stdout, stderr) by task_create() +# when a new task is started. If set, all files/drivers will +# appear to be closed in the new task except for stdin, stdout, +# and stderr. +# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket +# desciptors by task_create() when a new task is started. If +# set, all sockets will appear to be closed in the new task. +# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to +# handle delayed processing from interrupt handlers. This feature +# is required for some drivers but, if there are not complaints, +# can be safely disabled. The worker thread also performs +# garbage collection -- completing any delayed memory deallocations +# from interrupt handlers. If the worker thread is disabled, +# then that clean will be performed by the IDLE thread instead +# (which runs at the lowest of priority and may not be appropriate +# if memory reclamation is of high priority). If CONFIG_SCHED_WORKQUEUE +# is enabled, then the following options can also be used: +# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker +# thread. Default: 50 +# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for +# work in units of microseconds. Default: 50*1000 (50 MS). +# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker +# thread. Default: CONFIG_IDLETHREAD_STACKSIZE. +# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up +# the worker thread. Default: 4 +# CONFIG_SCHED_WAITPID - Enable the waitpid() API +# CONFIG_SCHED_ATEXIT - Enabled the atexit() API +# +CONFIG_USER_ENTRYPOINT="user_start" +#CONFIG_APPS_DIR= +CONFIG_DEBUG=n +CONFIG_DEBUG_VERBOSE=n +CONFIG_DEBUG_SYMBOLS=y +CONFIG_DEBUG_FS=n +CONFIG_DEBUG_GRAPHICS=n +CONFIG_DEBUG_LCD=n +CONFIG_DEBUG_USB=n +CONFIG_DEBUG_NET=n +CONFIG_DEBUG_RTC=n +CONFIG_DEBUG_ANALOG=n +CONFIG_DEBUG_PWM=n +CONFIG_DEBUG_CAN=n +CONFIG_DEBUG_I2C=n +CONFIG_DEBUG_INPUT=n + +CONFIG_MSEC_PER_TICK=1 +CONFIG_HAVE_CXX=y +CONFIG_HAVE_CXXINITIALIZE=y +CONFIG_MM_REGIONS=1 +CONFIG_MM_SMALL=y +CONFIG_ARCH_LOWPUTC=y +CONFIG_RR_INTERVAL=0 +CONFIG_SCHED_INSTRUMENTATION=n +CONFIG_TASK_NAME_SIZE=8 +CONFIG_START_YEAR=1970 +CONFIG_START_MONTH=1 +CONFIG_START_DAY=1 +CONFIG_GREGORIAN_TIME=n +CONFIG_JULIAN_TIME=n +# this eats ~1KiB of RAM ... work out why +CONFIG_DEV_CONSOLE=y +CONFIG_DEV_LOWCONSOLE=n +CONFIG_MUTEX_TYPES=n +CONFIG_PRIORITY_INHERITANCE=n +CONFIG_SEM_PREALLOCHOLDERS=0 +CONFIG_SEM_NNESTPRIO=0 +CONFIG_FDCLONE_DISABLE=y +CONFIG_FDCLONE_STDIO=y +CONFIG_SDCLONE_DISABLE=y +CONFIG_SCHED_WORKQUEUE=n +CONFIG_SCHED_WORKPRIORITY=50 +CONFIG_SCHED_WORKPERIOD=50000 +CONFIG_SCHED_WORKSTACKSIZE=1024 +CONFIG_SIG_SIGWORK=4 +CONFIG_SCHED_WAITPID=n +CONFIG_SCHED_ATEXIT=n + +# +# The following can be used to disable categories of +# APIs supported by the OS. If the compiler supports +# weak functions, then it should not be necessary to +# disable functions unless you want to restrict usage +# of those APIs. +# +# There are certain dependency relationships in these +# features. +# +# o mq_notify logic depends on signals to awaken tasks +# waiting for queues to become full or empty. +# o pthread_condtimedwait() depends on signals to wake +# up waiting tasks. +# +CONFIG_DISABLE_CLOCK=n +CONFIG_DISABLE_POSIX_TIMERS=y +CONFIG_DISABLE_PTHREAD=y +CONFIG_DISABLE_SIGNALS=y +CONFIG_DISABLE_MQUEUE=y +CONFIG_DISABLE_MOUNTPOINT=y +CONFIG_DISABLE_ENVIRON=y +CONFIG_DISABLE_POLL=y + +# +# Misc libc settings +# +# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a +# little smaller if we do not support fieldwidthes +# +CONFIG_NOPRINTF_FIELDWIDTH=n + +# +# Allow for architecture optimized implementations +# +# The architecture can provide optimized versions of the +# following to improve system performance +# +CONFIG_ARCH_MEMCPY=n +CONFIG_ARCH_MEMCMP=n +CONFIG_ARCH_MEMMOVE=n +CONFIG_ARCH_MEMSET=n +CONFIG_ARCH_STRCMP=n +CONFIG_ARCH_STRCPY=n +CONFIG_ARCH_STRNCPY=n +CONFIG_ARCH_STRLEN=n +CONFIG_ARCH_STRNLEN=n +CONFIG_ARCH_BZERO=n + +# +# Sizes of configurable things (0 disables) +# +# CONFIG_MAX_TASKS - The maximum number of simultaneously +# active tasks. This value must be a power of two. +# CONFIG_MAX_TASK_ARGS - This controls the maximum number of +# of parameters that a task may receive (i.e., maxmum value +# of 'argc') +# CONFIG_NPTHREAD_KEYS - The number of items of thread- +# specific data that can be retained +# CONFIG_NFILE_DESCRIPTORS - The maximum number of file +# descriptors (one for each open) +# CONFIG_NFILE_STREAMS - The maximum number of streams that +# can be fopen'ed +# CONFIG_NAME_MAX - The maximum size of a file name. +# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate +# on fopen. (Only if CONFIG_NFILE_STREAMS > 0) +# CONFIG_STDIO_LINEBUFFER - If standard C buffered I/O is enabled +# (CONFIG_STDIO_BUFFER_SIZE > 0), then this option may be added +# to force automatic, line-oriented flushing the output buffer +# for putc(), fputc(), putchar(), puts(), fputs(), printf(), +# fprintf(), and vfprintf(). When a newline is encountered in +# the output string, the output buffer will be flushed. This +# (slightly) increases the NuttX footprint but supports the kind +# of behavior that people expect for printf(). +# CONFIG_NUNGET_CHARS - Number of characters that can be +# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0) +# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message +# structures. The system manages a pool of preallocated +# message structures to minimize dynamic allocations +# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with +# a fixed payload size given by this settin (does not include +# other message structure overhead. +# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that +# can be passed to a watchdog handler +# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog +# structures. The system manages a pool of preallocated +# watchdog structures to minimize dynamic allocations +# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX +# timer structures. The system manages a pool of preallocated +# timer structures to minimize dynamic allocations. Set to +# zero for all dynamic allocations. +# +CONFIG_MAX_TASKS=4 +CONFIG_MAX_TASK_ARGS=4 +CONFIG_NPTHREAD_KEYS=2 +CONFIG_NFILE_DESCRIPTORS=8 +CONFIG_NFILE_STREAMS=0 +CONFIG_NAME_MAX=12 +CONFIG_STDIO_BUFFER_SIZE=32 +CONFIG_STDIO_LINEBUFFER=n +CONFIG_NUNGET_CHARS=2 +CONFIG_PREALLOC_MQ_MSGS=4 +CONFIG_MQ_MAXMSGSIZE=32 +CONFIG_MAX_WDOGPARMS=2 +CONFIG_PREALLOC_WDOGS=4 +CONFIG_PREALLOC_TIMERS=0 + + +# +# Settings for apps/nshlib +# +# CONFIG_NSH_BUILTIN_APPS - Support external registered, +# "named" applications that can be executed from the NSH +# command line (see apps/README.txt for more information). +# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer +# CONFIG_NSH_STRERROR - Use strerror(errno) +# CONFIG_NSH_LINELEN - Maximum length of one command line +# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi +# CONFIG_NSH_DISABLESCRIPT - Disable scripting support +# CONFIG_NSH_DISABLEBG - Disable background commands +# CONFIG_NSH_ROMFSETC - Use startup script in /etc +# CONFIG_NSH_CONSOLE - Use serial console front end +# CONFIG_NSH_TELNET - Use telnetd console front end +# CONFIG_NSH_ARCHINIT - Platform provides architecture +# specific initialization (nsh_archinitialize()). +# + +# Disable NSH completely +CONFIG_NSH_CONSOLE=n + +# +# Stack and heap information +# +# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP +# operation from FLASH but must copy initialized .data sections to RAM. +# (should also be =n for the STM3210E-EVAL which always runs from flash) +# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH +# but copy themselves entirely into RAM for better performance. +# CONFIG_CUSTOM_STACK - The up_ implementation will handle +# all stack operations outside of the nuttx model. +# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only) +# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack. +# This is the thread that (1) performs the inital boot of the system up +# to the point where user_start() is spawned, and (2) there after is the +# IDLE thread that executes only when there is no other thread ready to +# run. +# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate +# for the main user thread that begins at the user_start() entry point. +# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size +# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size +# CONFIG_HEAP_BASE - The beginning of the heap +# CONFIG_HEAP_SIZE - The size of the heap +# +CONFIG_BOOT_RUNFROMFLASH=n +CONFIG_BOOT_COPYTORAM=n +CONFIG_CUSTOM_STACK=n +CONFIG_STACK_POINTER= +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=1200 +CONFIG_PTHREAD_STACK_MIN=512 +CONFIG_PTHREAD_STACK_DEFAULT=1024 +CONFIG_HEAP_BASE= +CONFIG_HEAP_SIZE= + +# +# NSH Library +# +# CONFIG_NSH_LIBRARY is not set +# CONFIG_NSH_BUILTIN_APPS is not set diff --git a/nuttx-configs/px4io-v1/nsh/setenv.sh b/nuttx-configs/px4io-v1/nsh/setenv.sh new file mode 100755 index 000000000..ff9a4bf8a --- /dev/null +++ b/nuttx-configs/px4io-v1/nsh/setenv.sh @@ -0,0 +1,47 @@ +#!/bin/bash +# configs/stm3210e-eval/dfu/setenv.sh +# +# Copyright (C) 2009 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# + +if [ "$(basename $0)" = "setenv.sh" ] ; then + echo "You must source this script, not run it!" 1>&2 + exit 1 +fi + +if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi + +WD=`pwd` +export RIDE_BIN="/cygdrive/c/Program Files/Raisonance/Ride/arm-gcc/bin" +export BUILDROOT_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin" +export PATH="${BUILDROOT_BIN}:${RIDE_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" + +echo "PATH : ${PATH}" diff --git a/nuttx-configs/px4io-v1/scripts/ld.script b/nuttx-configs/px4io-v1/scripts/ld.script new file mode 100755 index 000000000..69c2f9cb2 --- /dev/null +++ b/nuttx-configs/px4io-v1/scripts/ld.script @@ -0,0 +1,129 @@ +/**************************************************************************** + * configs/stm3210e-eval/nsh/ld.script + * + * Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/* The STM32F100C8 has 64Kb of FLASH beginning at address 0x0800:0000 and + * 8Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH, + * FLASH memory is aliased to address 0x0000:0000 where the code expects to + * begin execution by jumping to the entry point in the 0x0800:0000 address + * range. + */ + +MEMORY +{ + flash (rx) : ORIGIN = 0x08001000, LENGTH = 60K + sram (rwx) : ORIGIN = 0x20000000, LENGTH = 8K +} + +OUTPUT_ARCH(arm) +ENTRY(__start) /* treat __start as the anchor for dead code stripping */ +EXTERN(_vectors) /* force the vectors to be included in the output */ + +/* + * Ensure that abort() is present in the final object. The exception handling + * code pulled in by libgcc.a requires it (and that code cannot be easily avoided). + */ +EXTERN(abort) + +SECTIONS +{ + .text : { + _stext = ABSOLUTE(.); + *(.vectors) + *(.text .text.*) + *(.fixup) + *(.gnu.warning) + *(.rodata .rodata.*) + *(.gnu.linkonce.t.*) + *(.glue_7) + *(.glue_7t) + *(.got) + *(.gcc_except_table) + *(.gnu.linkonce.r.*) + _etext = ABSOLUTE(.); + } > flash + + /* + * Init functions (static constructors and the like) + */ + .init_section : { + _sinit = ABSOLUTE(.); + KEEP(*(.init_array .init_array.*)) + _einit = ABSOLUTE(.); + } > flash + + .ARM.extab : { + *(.ARM.extab*) + } > flash + + __exidx_start = ABSOLUTE(.); + .ARM.exidx : { + *(.ARM.exidx*) + } > flash + __exidx_end = ABSOLUTE(.); + + _eronly = ABSOLUTE(.); + + /* The STM32F100CB has 8Kb of SRAM beginning at the following address */ + + .data : { + _sdata = ABSOLUTE(.); + *(.data .data.*) + *(.gnu.linkonce.d.*) + CONSTRUCTORS + _edata = ABSOLUTE(.); + } > sram AT > flash + + .bss : { + _sbss = ABSOLUTE(.); + *(.bss .bss.*) + *(.gnu.linkonce.b.*) + *(COMMON) + _ebss = ABSOLUTE(.); + } > sram + + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_info 0 : { *(.debug_info) } + .debug_line 0 : { *(.debug_line) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_aranges 0 : { *(.debug_aranges) } +} diff --git a/nuttx-configs/px4io-v1/src/Makefile b/nuttx-configs/px4io-v1/src/Makefile new file mode 100644 index 000000000..bb9539d16 --- /dev/null +++ b/nuttx-configs/px4io-v1/src/Makefile @@ -0,0 +1,84 @@ +############################################################################ +# configs/stm3210e-eval/src/Makefile +# +# Copyright (C) 2009-2010 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <spudmonkey@racsa.co.cr> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +-include $(TOPDIR)/Make.defs + +CFLAGS += -I$(TOPDIR)/sched + +ASRCS = +AOBJS = $(ASRCS:.S=$(OBJEXT)) + +CSRCS = empty.c + +COBJS = $(CSRCS:.c=$(OBJEXT)) + +SRCS = $(ASRCS) $(CSRCS) +OBJS = $(AOBJS) $(COBJS) + +ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src +ifeq ($(WINTOOL),y) + CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \ + -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \ + -I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}" +else + CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m +endif + +all: libboard$(LIBEXT) + +$(AOBJS): %$(OBJEXT): %.S + $(call ASSEMBLE, $<, $@) + +$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c + $(call COMPILE, $<, $@) + +libboard$(LIBEXT): $(OBJS) + $(call ARCHIVE, $@, $(OBJS)) + +.depend: Makefile $(SRCS) + @$(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep + @touch $@ + +depend: .depend + +clean: + $(call DELFILE, libboard$(LIBEXT)) + $(call CLEAN) + +distclean: clean + $(call DELFILE, Make.dep) + $(call DELFILE, .depend) + +-include Make.dep diff --git a/nuttx-configs/px4io-v1/src/empty.c b/nuttx-configs/px4io-v1/src/empty.c new file mode 100644 index 000000000..ace900866 --- /dev/null +++ b/nuttx-configs/px4io-v1/src/empty.c @@ -0,0 +1,4 @@ +/* + * There are no source files here, but libboard.a can't be empty, so + * we have this empty source file to keep it company. + */ |