diff options
-rw-r--r-- | ROMFS/px4fmu_common/init.d/rc.fw_defaults | 2 | ||||
-rw-r--r-- | src/drivers/px4io/px4io.cpp | 34 | ||||
-rw-r--r-- | src/modules/commander/module.mk | 4 | ||||
-rw-r--r-- | src/modules/px4iofirmware/controls.c | 7 | ||||
-rw-r--r-- | src/modules/px4iofirmware/protocol.h | 1 | ||||
-rw-r--r-- | src/modules/systemlib/pid/pid.c | 2 | ||||
-rw-r--r-- | src/systemcmds/mtd/24xxxx_mtd.c | 36 | ||||
-rw-r--r-- | src/systemcmds/nshterm/module.mk | 2 | ||||
-rw-r--r-- | src/systemcmds/param/param.c | 21 | ||||
-rw-r--r-- | src/systemcmds/top/module.mk | 2 |
10 files changed, 70 insertions, 41 deletions
diff --git a/ROMFS/px4fmu_common/init.d/rc.fw_defaults b/ROMFS/px4fmu_common/init.d/rc.fw_defaults index 4cd73e23f..3a50fcf56 100644 --- a/ROMFS/px4fmu_common/init.d/rc.fw_defaults +++ b/ROMFS/px4fmu_common/init.d/rc.fw_defaults @@ -11,6 +11,4 @@ then param set NAV_RTL_ALT 100 param set NAV_RTL_LAND_T -1 param set NAV_ACCEPT_RAD 50 - param set RC_SCALE_ROLL 1 - param set RC_SCALE_PITCH 1 fi
\ No newline at end of file diff --git a/src/drivers/px4io/px4io.cpp b/src/drivers/px4io/px4io.cpp index aec6dd3b7..3c3b59862 100644 --- a/src/drivers/px4io/px4io.cpp +++ b/src/drivers/px4io/px4io.cpp @@ -529,6 +529,11 @@ PX4IO::~PX4IO() if (_interface != nullptr) delete _interface; + /* deallocate perfs */ + perf_free(_perf_update); + perf_free(_perf_write); + perf_free(_perf_chan_count); + g_dev = nullptr; } @@ -1448,7 +1453,7 @@ PX4IO::io_get_raw_rc_input(rc_input_values &input_rc) /* we don't have the status bits, so input_source has to be set elsewhere */ input_rc.input_source = RC_INPUT_SOURCE_UNKNOWN; - static const unsigned prolog = (PX4IO_P_RAW_RC_BASE - PX4IO_P_RAW_RC_COUNT); + const unsigned prolog = (PX4IO_P_RAW_RC_BASE - PX4IO_P_RAW_RC_COUNT); uint16_t regs[RC_INPUT_MAX_CHANNELS + prolog]; /* @@ -1456,8 +1461,6 @@ PX4IO::io_get_raw_rc_input(rc_input_values &input_rc) * * This should be the common case (9 channel R/C control being a reasonable upper bound). */ - input_rc.timestamp_publication = hrt_absolute_time(); - ret = io_reg_get(PX4IO_PAGE_RAW_RC_INPUT, PX4IO_P_RAW_RC_COUNT, ®s[0], prolog + 9); if (ret != OK) @@ -1469,23 +1472,38 @@ PX4IO::io_get_raw_rc_input(rc_input_values &input_rc) */ channel_count = regs[PX4IO_P_RAW_RC_COUNT]; - if (channel_count != _rc_chan_count) + /* limit the channel count */ + if (channel_count > RC_INPUT_MAX_CHANNELS) { + channel_count = RC_INPUT_MAX_CHANNELS; + } + + /* count channel count changes to identify signal integrity issues */ + if (channel_count != _rc_chan_count) { perf_count(_perf_chan_count); + } _rc_chan_count = channel_count; + input_rc.timestamp_publication = hrt_absolute_time(); + input_rc.rc_ppm_frame_length = regs[PX4IO_P_RAW_RC_DATA]; input_rc.rssi = regs[PX4IO_P_RAW_RC_NRSSI]; input_rc.rc_failsafe = (regs[PX4IO_P_RAW_RC_FLAGS] & PX4IO_P_RAW_RC_FLAGS_FAILSAFE); + input_rc.rc_lost = !(regs[PX4IO_P_RAW_RC_FLAGS] & PX4IO_P_RAW_RC_FLAGS_RC_OK); input_rc.rc_lost_frame_count = regs[PX4IO_P_RAW_LOST_FRAME_COUNT]; input_rc.rc_total_frame_count = regs[PX4IO_P_RAW_FRAME_COUNT]; + input_rc.channel_count = channel_count; /* rc_lost has to be set before the call to this function */ - if (!input_rc.rc_lost && !input_rc.rc_failsafe) + if (!input_rc.rc_lost && !input_rc.rc_failsafe) { _rc_last_valid = input_rc.timestamp_publication; + } input_rc.timestamp_last_signal = _rc_last_valid; + /* FIELDS NOT SET HERE */ + /* input_rc.input_source is set after this call XXX we might want to mirror the flags in the RC struct */ + if (channel_count > 9) { ret = io_reg_get(PX4IO_PAGE_RAW_RC_INPUT, PX4IO_P_RAW_RC_BASE + 9, ®s[prolog + 9], channel_count - 9); @@ -1493,8 +1511,10 @@ PX4IO::io_get_raw_rc_input(rc_input_values &input_rc) return ret; } - input_rc.channel_count = channel_count; - memcpy(input_rc.values, ®s[prolog], channel_count * 2); + /* last thing set are the actual channel values as 16 bit values */ + for (unsigned i = 0; i < channel_count; i++) { + input_rc.values[i] = regs[prolog + i]; + } return ret; } diff --git a/src/modules/commander/module.mk b/src/modules/commander/module.mk index 554dfcb08..27ca5c182 100644 --- a/src/modules/commander/module.mk +++ b/src/modules/commander/module.mk @@ -47,3 +47,7 @@ SRCS = commander.cpp \ baro_calibration.cpp \ rc_calibration.cpp \ airspeed_calibration.cpp + +MODULE_STACKSIZE = 1200 + +MAXOPTIMIZATION = -Os diff --git a/src/modules/px4iofirmware/controls.c b/src/modules/px4iofirmware/controls.c index 56c5aa005..62e6b12cb 100644 --- a/src/modules/px4iofirmware/controls.c +++ b/src/modules/px4iofirmware/controls.c @@ -291,6 +291,7 @@ controls_tick() { /* set RC OK flag, as we got an update */ r_status_flags |= PX4IO_P_STATUS_FLAGS_RC_OK; + r_raw_rc_flags |= PX4IO_P_RAW_RC_FLAGS_RC_OK; /* if we have enough channels (5) to control the vehicle, the mapping is ok */ if (assigned_channels > 4) { @@ -336,6 +337,9 @@ controls_tick() { PX4IO_P_STATUS_FLAGS_OVERRIDE | PX4IO_P_STATUS_FLAGS_RC_OK); + /* flag raw RC as lost */ + r_raw_rc_flags &= ~(PX4IO_P_RAW_RC_FLAGS_RC_OK); + /* Mark all channels as invalid, as we just lost the RX */ r_rc_valid = 0; @@ -405,8 +409,9 @@ ppm_input(uint16_t *values, uint16_t *num_values, uint16_t *frame_len) if (*num_values > PX4IO_RC_INPUT_CHANNELS) *num_values = PX4IO_RC_INPUT_CHANNELS; - for (unsigned i = 0; i < *num_values; i++) + for (unsigned i = 0; i < *num_values; i++) { values[i] = ppm_buffer[i]; + } /* clear validity */ ppm_last_valid_decode = 0; diff --git a/src/modules/px4iofirmware/protocol.h b/src/modules/px4iofirmware/protocol.h index 6c20d6006..91975f2a0 100644 --- a/src/modules/px4iofirmware/protocol.h +++ b/src/modules/px4iofirmware/protocol.h @@ -142,6 +142,7 @@ #define PX4IO_P_RAW_RC_FLAGS_FAILSAFE (1 << 1) /* receiver is in failsafe mode */ #define PX4IO_P_RAW_RC_FLAGS_RC_DSM11 (1 << 2) /* DSM decoding is 11 bit mode */ #define PX4IO_P_RAW_RC_FLAGS_MAPPING_OK (1 << 3) /* Channel mapping is ok */ +#define PX4IO_P_RAW_RC_FLAGS_RC_OK (1 << 4) /* RC reception ok */ #define PX4IO_P_RAW_RC_NRSSI 2 /* [2] Normalized RSSI value, 0: no reception, 255: perfect reception */ #define PX4IO_P_RAW_RC_DATA 3 /* [1] + [2] Details about the RC source (PPM frame length, Spektrum protocol type) */ diff --git a/src/modules/systemlib/pid/pid.c b/src/modules/systemlib/pid/pid.c index 6a4e9392a..45f218a5b 100644 --- a/src/modules/systemlib/pid/pid.c +++ b/src/modules/systemlib/pid/pid.c @@ -53,7 +53,7 @@ #define SIGMA 0.000001f -__EXPORT void pid_init(PID_t *pid, uint8_t mode, float dt_min) +__EXPORT void pid_init(PID_t *pid, pid_mode_t mode, float dt_min) { pid->mode = mode; pid->dt_min = dt_min; diff --git a/src/systemcmds/mtd/24xxxx_mtd.c b/src/systemcmds/mtd/24xxxx_mtd.c index e34be44e3..a3f9dffff 100644 --- a/src/systemcmds/mtd/24xxxx_mtd.c +++ b/src/systemcmds/mtd/24xxxx_mtd.c @@ -142,12 +142,9 @@ struct at24c_dev_s { uint16_t pagesize; /* 32, 63 */ uint16_t npages; /* 128, 256, 512, 1024 */ - perf_counter_t perf_reads; - perf_counter_t perf_writes; - perf_counter_t perf_resets; - perf_counter_t perf_read_retries; - perf_counter_t perf_read_errors; - perf_counter_t perf_write_errors; + perf_counter_t perf_transfers; + perf_counter_t perf_resets_retries; + perf_counter_t perf_errors; }; /************************************************************************************ @@ -298,9 +295,9 @@ static ssize_t at24c_bread(FAR struct mtd_dev_s *dev, off_t startblock, for (;;) { - perf_begin(priv->perf_reads); + perf_begin(priv->perf_transfers); ret = I2C_TRANSFER(priv->dev, &msgv[0], 2); - perf_end(priv->perf_reads); + perf_end(priv->perf_transfers); if (ret >= 0) break; @@ -314,10 +311,10 @@ static ssize_t at24c_bread(FAR struct mtd_dev_s *dev, off_t startblock, * XXX maybe do special first-read handling with optional * bus reset as well? */ - perf_count(priv->perf_read_retries); + perf_count(priv->perf_resets_retries); if (--tries == 0) { - perf_count(priv->perf_read_errors); + perf_count(priv->perf_errors); return ERROR; } } @@ -383,9 +380,9 @@ static ssize_t at24c_bwrite(FAR struct mtd_dev_s *dev, off_t startblock, size_t for (;;) { - perf_begin(priv->perf_writes); + perf_begin(priv->perf_transfers); ret = I2C_TRANSFER(priv->dev, &msgv[0], 1); - perf_end(priv->perf_writes); + perf_end(priv->perf_transfers); if (ret >= 0) break; @@ -397,7 +394,7 @@ static ssize_t at24c_bwrite(FAR struct mtd_dev_s *dev, off_t startblock, size_t * poll for write completion. */ if (--tries == 0) { - perf_count(priv->perf_write_errors); + perf_count(priv->perf_errors); return ERROR; } } @@ -521,12 +518,9 @@ FAR struct mtd_dev_s *at24c_initialize(FAR struct i2c_dev_s *dev) { priv->mtd.ioctl = at24c_ioctl; priv->dev = dev; - priv->perf_reads = perf_alloc(PC_ELAPSED, "EEPROM read"); - priv->perf_writes = perf_alloc(PC_ELAPSED, "EEPROM write"); - priv->perf_resets = perf_alloc(PC_COUNT, "EEPROM reset"); - priv->perf_read_retries = perf_alloc(PC_COUNT, "EEPROM read retries"); - priv->perf_read_errors = perf_alloc(PC_COUNT, "EEPROM read errors"); - priv->perf_write_errors = perf_alloc(PC_COUNT, "EEPROM write errors"); + priv->perf_transfers = perf_alloc(PC_ELAPSED, "eeprom_trans"); + priv->perf_resets_retries = perf_alloc(PC_COUNT, "eeprom_rst"); + priv->perf_errors = perf_alloc(PC_COUNT, "eeprom_errs"); } /* attempt to read to validate device is present */ @@ -548,9 +542,9 @@ FAR struct mtd_dev_s *at24c_initialize(FAR struct i2c_dev_s *dev) { } }; - perf_begin(priv->perf_reads); + perf_begin(priv->perf_transfers); int ret = I2C_TRANSFER(priv->dev, &msgv[0], 2); - perf_end(priv->perf_reads); + perf_end(priv->perf_transfers); if (ret < 0) { return NULL; diff --git a/src/systemcmds/nshterm/module.mk b/src/systemcmds/nshterm/module.mk index a48588535..fe79ec3b7 100644 --- a/src/systemcmds/nshterm/module.mk +++ b/src/systemcmds/nshterm/module.mk @@ -38,4 +38,4 @@ MODULE_COMMAND = nshterm SRCS = nshterm.c -MODULE_STACKSIZE = 3000 +MODULE_STACKSIZE = 1500 diff --git a/src/systemcmds/param/param.c b/src/systemcmds/param/param.c index 984d19bd9..d92ee88ef 100644 --- a/src/systemcmds/param/param.c +++ b/src/systemcmds/param/param.c @@ -61,7 +61,7 @@ static void do_load(const char* param_file_name); static void do_import(const char* param_file_name); static void do_show(const char* search_string); static void do_show_print(void *arg, param_t param); -static void do_set(const char* name, const char* val); +static void do_set(const char* name, const char* val, bool fail_on_not_found); static void do_compare(const char* name, const char* vals[], unsigned comparisons); static void do_reset(); @@ -117,10 +117,17 @@ param_main(int argc, char *argv[]) } if (!strcmp(argv[1], "set")) { - if (argc >= 4) { - do_set(argv[2], argv[3]); + if (argc >= 5) { + + /* if the fail switch is provided, fails the command if not found */ + bool fail = !strcmp(argv[4], "fail"); + + do_set(argv[2], argv[3], fail); + + } else if (argc >= 4) { + do_set(argv[2], argv[3], false); } else { - errx(1, "not enough arguments.\nTry 'param set PARAM_NAME 3'"); + errx(1, "not enough arguments.\nTry 'param set PARAM_NAME 3 [fail]'"); } } @@ -282,7 +289,7 @@ do_show_print(void *arg, param_t param) } static void -do_set(const char* name, const char* val) +do_set(const char* name, const char* val, bool fail_on_not_found) { int32_t i; float f; @@ -290,8 +297,8 @@ do_set(const char* name, const char* val) /* set nothing if parameter cannot be found */ if (param == PARAM_INVALID) { - /* param not found */ - errx(1, "Error: Parameter %s not found.", name); + /* param not found - fail silenty in scripts as it prevents booting */ + errx(((fail_on_not_found) ? 1 : 0), "Error: Parameter %s not found.", name); } printf("%c %s: ", diff --git a/src/systemcmds/top/module.mk b/src/systemcmds/top/module.mk index 9239aafc3..985ea846f 100644 --- a/src/systemcmds/top/module.mk +++ b/src/systemcmds/top/module.mk @@ -38,7 +38,7 @@ MODULE_COMMAND = top SRCS = top.c -MODULE_STACKSIZE = 3000 +MODULE_STACKSIZE = 2048 MAXOPTIMIZATION = -Os |