diff options
-rw-r--r-- | ROMFS/px4fmu_common/init.d/1000_rc_fw.hil (renamed from ROMFS/px4fmu_common/init.d/1000_rc.hil) | 0 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/1002_rc_fw_state.hil | 84 | ||||
-rwxr-xr-x | ROMFS/px4fmu_common/init.d/rcS | 13 | ||||
-rw-r--r-- | nuttx-configs/px4fmu-v1/nsh/defconfig | 2 | ||||
-rw-r--r-- | src/drivers/gps/gps.cpp | 121 | ||||
-rw-r--r-- | src/drivers/gps/gps_helper.cpp | 7 | ||||
-rw-r--r-- | src/drivers/gps/gps_helper.h | 2 | ||||
-rw-r--r-- | src/drivers/gps/mtk.cpp | 26 | ||||
-rw-r--r-- | src/drivers/gps/ubx.cpp | 58 | ||||
-rw-r--r-- | src/drivers/gps/ubx.h | 6 | ||||
-rw-r--r-- | src/drivers/px4io/px4io.cpp | 16 | ||||
-rw-r--r-- | src/drivers/rgbled/rgbled.cpp | 462 | ||||
-rw-r--r-- | src/modules/commander/commander.cpp | 119 | ||||
-rw-r--r-- | src/modules/commander/commander_helper.cpp | 50 | ||||
-rw-r--r-- | src/modules/commander/commander_helper.h | 3 | ||||
-rw-r--r-- | src/modules/mavlink/mavlink_receiver.cpp | 1 | ||||
-rw-r--r-- | src/modules/mavlink/orb_listener.c | 23 | ||||
-rw-r--r-- | src/modules/systemlib/param/param.c | 38 |
18 files changed, 677 insertions, 354 deletions
diff --git a/ROMFS/px4fmu_common/init.d/1000_rc.hil b/ROMFS/px4fmu_common/init.d/1000_rc_fw.hil index 11318023c..11318023c 100644 --- a/ROMFS/px4fmu_common/init.d/1000_rc.hil +++ b/ROMFS/px4fmu_common/init.d/1000_rc_fw.hil diff --git a/ROMFS/px4fmu_common/init.d/1002_rc_fw_state.hil b/ROMFS/px4fmu_common/init.d/1002_rc_fw_state.hil new file mode 100644 index 000000000..d5782a89b --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/1002_rc_fw_state.hil @@ -0,0 +1,84 @@ +#!nsh +# +# USB HIL start +# + +echo "[HIL] HILStar starting in state-HIL mode.." + +# +# Load default params for this platform +# +if param compare SYS_AUTOCONFIG 1 +then + # Set all params here, then disable autoconfig + + param set FW_P_D 0 + param set FW_P_I 0 + param set FW_P_IMAX 15 + param set FW_P_LIM_MAX 50 + param set FW_P_LIM_MIN -50 + param set FW_P_P 60 + param set FW_P_RMAX_NEG 0 + param set FW_P_RMAX_POS 0 + param set FW_P_ROLLFF 1.1 + param set FW_R_D 0 + param set FW_R_I 5 + param set FW_R_IMAX 20 + param set FW_R_P 100 + param set FW_R_RMAX 100 + param set FW_THR_CRUISE 0.65 + param set FW_THR_MAX 1 + param set FW_THR_MIN 0 + param set FW_T_SINK_MAX 5.0 + param set FW_T_SINK_MIN 4.0 + param set FW_Y_ROLLFF 1.1 + + param set SYS_AUTOCONFIG 0 + param save +fi + +# Allow USB some time to come up +sleep 1 +# Tell MAVLink that this link is "fast" +mavlink start -b 230400 -d /dev/ttyACM0 + +# Create a fake HIL /dev/pwm_output interface +hil mode_pwm + +# +# Force some key parameters to sane values +# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor +# see https://pixhawk.ethz.ch/mavlink/ +# +param set MAV_TYPE 1 + +# +# Start the commander (depends on orb, mavlink) +# +commander start + +# +# Check if we got an IO +# +if px4io start +then + echo "IO started" +else + fmu mode_serial + echo "FMU started" +fi + +# +# Start the sensors (depends on orb, px4io) +# +sh /etc/init.d/rc.sensors + +# +# Load mixer and start controllers (depends on px4io) +# +mixer load /dev/pwm_output /etc/mixers/FMU_AET.mix +fw_pos_control_l1 start +fw_att_control start + +echo "[HIL] setup done, running" + diff --git a/ROMFS/px4fmu_common/init.d/rcS b/ROMFS/px4fmu_common/init.d/rcS index c2a8c0c6a..9ec346465 100755 --- a/ROMFS/px4fmu_common/init.d/rcS +++ b/ROMFS/px4fmu_common/init.d/rcS @@ -108,15 +108,22 @@ then if param compare SYS_AUTOSTART 1000 then - sh /etc/init.d/1000_rc.hil + sh /etc/init.d/1000_rc_fw.hil set MODE custom else if param compare SYS_AUTOSTART 1001 then sh /etc/init.d/1001_rc_quad.hil + set MODE custom else - # Try to get an USB console - nshterm /dev/ttyACM0 & + if param compare SYS_AUTOSTART 1002 + then + sh /etc/init.d/1002_rc_fw_state.hil + set MODE custom + else + # Try to get an USB console + nshterm /dev/ttyACM0 & + fi fi fi diff --git a/nuttx-configs/px4fmu-v1/nsh/defconfig b/nuttx-configs/px4fmu-v1/nsh/defconfig index e43b9c18e..ba211ccb2 100644 --- a/nuttx-configs/px4fmu-v1/nsh/defconfig +++ b/nuttx-configs/px4fmu-v1/nsh/defconfig @@ -262,7 +262,7 @@ CONFIG_STM32_USART=y # U[S]ART Configuration # # CONFIG_USART1_RS485 is not set -# CONFIG_USART1_RXDMA is not set +CONFIG_USART1_RXDMA=y # CONFIG_USART2_RS485 is not set CONFIG_USART2_RXDMA=y # CONFIG_USART3_RXDMA is not set diff --git a/src/drivers/gps/gps.cpp b/src/drivers/gps/gps.cpp index 38835418b..a84cb8e59 100644 --- a/src/drivers/gps/gps.cpp +++ b/src/drivers/gps/gps.cpp @@ -85,7 +85,7 @@ static const int ERROR = -1; class GPS : public device::CDev { public: - GPS(const char* uart_path); + GPS(const char *uart_path); virtual ~GPS(); virtual int init(); @@ -156,7 +156,7 @@ GPS *g_dev; } -GPS::GPS(const char* uart_path) : +GPS::GPS(const char *uart_path) : CDev("gps", GPS_DEVICE_PATH), _task_should_exit(false), _healthy(false), @@ -192,6 +192,7 @@ GPS::~GPS() /* well, kill it anyway, though this will probably crash */ if (_task != -1) task_delete(_task); + g_dev = nullptr; } @@ -270,19 +271,24 @@ GPS::task_main() } switch (_mode) { - case GPS_DRIVER_MODE_UBX: - _Helper = new UBX(_serial_fd, &_report); - break; - case GPS_DRIVER_MODE_MTK: - _Helper = new MTK(_serial_fd, &_report); - break; - case GPS_DRIVER_MODE_NMEA: - //_Helper = new NMEA(); //TODO: add NMEA - break; - default: - break; + case GPS_DRIVER_MODE_UBX: + _Helper = new UBX(_serial_fd, &_report); + break; + + case GPS_DRIVER_MODE_MTK: + _Helper = new MTK(_serial_fd, &_report); + break; + + case GPS_DRIVER_MODE_NMEA: + //_Helper = new NMEA(); //TODO: add NMEA + break; + + default: + break; } + unlock(); + if (_Helper->configure(_baudrate) == 0) { unlock(); @@ -294,6 +300,7 @@ GPS::task_main() /* opportunistic publishing - else invalid data would end up on the bus */ if (_report_pub > 0) { orb_publish(ORB_ID(vehicle_gps_position), _report_pub, &_report); + } else { _report_pub = orb_advertise(ORB_ID(vehicle_gps_position), &_report); } @@ -310,10 +317,30 @@ GPS::task_main() } if (!_healthy) { - warnx("module found"); + char *mode_str = "unknown"; + + switch (_mode) { + case GPS_DRIVER_MODE_UBX: + mode_str = "UBX"; + break; + + case GPS_DRIVER_MODE_MTK: + mode_str = "MTK"; + break; + + case GPS_DRIVER_MODE_NMEA: + mode_str = "NMEA"; + break; + + default: + break; + } + + warnx("module found: %s", mode_str); _healthy = true; } } + if (_healthy) { warnx("module lost"); _healthy = false; @@ -322,25 +349,29 @@ GPS::task_main() lock(); } + lock(); /* select next mode */ switch (_mode) { - case GPS_DRIVER_MODE_UBX: - _mode = GPS_DRIVER_MODE_MTK; - break; - case GPS_DRIVER_MODE_MTK: - _mode = GPS_DRIVER_MODE_UBX; - break; - // case GPS_DRIVER_MODE_NMEA: - // _mode = GPS_DRIVER_MODE_UBX; - // break; - default: - break; + case GPS_DRIVER_MODE_UBX: + _mode = GPS_DRIVER_MODE_MTK; + break; + + case GPS_DRIVER_MODE_MTK: + _mode = GPS_DRIVER_MODE_UBX; + break; + + // case GPS_DRIVER_MODE_NMEA: + // _mode = GPS_DRIVER_MODE_UBX; + // break; + default: + break; } } - debug("exiting"); + + warnx("exiting"); ::close(_serial_fd); @@ -361,23 +392,29 @@ void GPS::print_info() { switch (_mode) { - case GPS_DRIVER_MODE_UBX: - warnx("protocol: UBX"); - break; - case GPS_DRIVER_MODE_MTK: - warnx("protocol: MTK"); - break; - case GPS_DRIVER_MODE_NMEA: - warnx("protocol: NMEA"); - break; - default: - break; + case GPS_DRIVER_MODE_UBX: + warnx("protocol: UBX"); + break; + + case GPS_DRIVER_MODE_MTK: + warnx("protocol: MTK"); + break; + + case GPS_DRIVER_MODE_NMEA: + warnx("protocol: NMEA"); + break; + + default: + break; } + warnx("port: %s, baudrate: %d, status: %s", _port, _baudrate, (_healthy) ? "OK" : "NOT OK"); + if (_report.timestamp_position != 0) { - warnx("position lock: %dD, last update %4.2f seconds ago", (int)_report.fix_type, - (double)((float)(hrt_absolute_time() - _report.timestamp_position) / 1000000.0f)); + warnx("position lock: %dD, satellites: %d, last update: %fms ago", (int)_report.fix_type, + _report.satellites_visible, (hrt_absolute_time() - _report.timestamp_position) / 1000.0f); warnx("lat: %d, lon: %d, alt: %d", _report.lat, _report.lon, _report.alt); + warnx("eph: %.2fm, epv: %.2fm", _report.eph_m, _report.epv_m); warnx("rate position: \t%6.2f Hz", (double)_Helper->get_position_update_rate()); warnx("rate velocity: \t%6.2f Hz", (double)_Helper->get_velocity_update_rate()); warnx("rate publication:\t%6.2f Hz", (double)_rate); @@ -428,6 +465,7 @@ start(const char *uart_path) errx(1, "Could not open device path: %s\n", GPS_DEVICE_PATH); goto fail; } + exit(0); fail: @@ -503,7 +541,7 @@ gps_main(int argc, char *argv[]) { /* set to default */ - char* device_name = GPS_DEFAULT_UART_PORT; + char *device_name = GPS_DEFAULT_UART_PORT; /* * Start/load the driver. @@ -513,15 +551,18 @@ gps_main(int argc, char *argv[]) if (argc > 3) { if (!strcmp(argv[2], "-d")) { device_name = argv[3]; + } else { goto out; } } + gps::start(device_name); } if (!strcmp(argv[1], "stop")) gps::stop(); + /* * Test the driver/device. */ diff --git a/src/drivers/gps/gps_helper.cpp b/src/drivers/gps/gps_helper.cpp index ba86d370a..2e2cbc8dd 100644 --- a/src/drivers/gps/gps_helper.cpp +++ b/src/drivers/gps/gps_helper.cpp @@ -87,13 +87,15 @@ GPS_Helper::set_baudrate(const int &fd, unsigned baud) case 115200: speed = B115200; break; - warnx("try baudrate: %d\n", speed); + warnx("try baudrate: %d\n", speed); default: warnx("ERROR: Unsupported baudrate: %d\n", baud); return -EINVAL; } + struct termios uart_config; + int termios_state; /* fill the struct for the new configuration */ @@ -109,14 +111,17 @@ GPS_Helper::set_baudrate(const int &fd, unsigned baud) warnx("ERROR setting config: %d (cfsetispeed)\n", termios_state); return -1; } + if ((termios_state = cfsetospeed(&uart_config, speed)) < 0) { warnx("ERROR setting config: %d (cfsetospeed)\n", termios_state); return -1; } + if ((termios_state = tcsetattr(fd, TCSANOW, &uart_config)) < 0) { warnx("ERROR setting baudrate (tcsetattr)\n"); return -1; } + /* XXX if resetting the parser here, ensure it does exist (check for null pointer) */ return 0; } diff --git a/src/drivers/gps/gps_helper.h b/src/drivers/gps/gps_helper.h index defc1a074..73d4b889c 100644 --- a/src/drivers/gps/gps_helper.h +++ b/src/drivers/gps/gps_helper.h @@ -33,7 +33,7 @@ * ****************************************************************************/ -/** +/** * @file gps_helper.h */ diff --git a/src/drivers/gps/mtk.cpp b/src/drivers/gps/mtk.cpp index 62941d74b..56b702ea6 100644 --- a/src/drivers/gps/mtk.cpp +++ b/src/drivers/gps/mtk.cpp @@ -48,9 +48,9 @@ MTK::MTK(const int &fd, struct vehicle_gps_position_s *gps_position) : -_fd(fd), -_gps_position(gps_position), -_mtk_revision(0) + _fd(fd), + _gps_position(gps_position), + _mtk_revision(0) { decode_init(); } @@ -73,24 +73,28 @@ MTK::configure(unsigned &baudrate) warnx("mtk: config write failed"); return -1; } + usleep(10000); if (strlen(MTK_SET_BINARY) != write(_fd, MTK_SET_BINARY, strlen(MTK_SET_BINARY))) { warnx("mtk: config write failed"); return -1; } + usleep(10000); if (strlen(SBAS_ON) != write(_fd, SBAS_ON, strlen(SBAS_ON))) { warnx("mtk: config write failed"); return -1; } + usleep(10000); if (strlen(WAAS_ON) != write(_fd, WAAS_ON, strlen(WAAS_ON))) { warnx("mtk: config write failed"); return -1; } + usleep(10000); if (strlen(MTK_NAVTHRES_OFF) != write(_fd, MTK_NAVTHRES_OFF, strlen(MTK_NAVTHRES_OFF))) { @@ -128,12 +132,15 @@ MTK::receive(unsigned timeout) handle_message(packet); return 1; } + /* in case we keep trying but only get crap from GPS */ - if (time_started + timeout*1000 < hrt_absolute_time() ) { + if (time_started + timeout * 1000 < hrt_absolute_time()) { return -1; } + j++; } + /* everything is read */ j = count = 0; } @@ -181,6 +188,7 @@ MTK::parse_char(uint8_t b, gps_mtk_packet_t &packet) if (b == MTK_SYNC1_V16) { _decode_state = MTK_DECODE_GOT_CK_A; _mtk_revision = 16; + } else if (b == MTK_SYNC1_V19) { _decode_state = MTK_DECODE_GOT_CK_A; _mtk_revision = 19; @@ -201,7 +209,7 @@ MTK::parse_char(uint8_t b, gps_mtk_packet_t &packet) add_byte_to_checksum(b); // Fill packet buffer - ((uint8_t*)(&packet))[_rx_count] = b; + ((uint8_t *)(&packet))[_rx_count] = b; _rx_count++; /* Packet size minus checksum, XXX ? */ @@ -209,14 +217,17 @@ MTK::parse_char(uint8_t b, gps_mtk_packet_t &packet) /* Compare checksum */ if (_rx_ck_a == packet.ck_a && _rx_ck_b == packet.ck_b) { ret = 1; + } else { warnx("MTK Checksum invalid"); ret = -1; } + // Reset state machine to decode next packet decode_init(); } } + return ret; } @@ -226,19 +237,22 @@ MTK::handle_message(gps_mtk_packet_t &packet) if (_mtk_revision == 16) { _gps_position->lat = packet.latitude * 10; // from degrees*1e6 to degrees*1e7 _gps_position->lon = packet.longitude * 10; // from degrees*1e6 to degrees*1e7 + } else if (_mtk_revision == 19) { _gps_position->lat = packet.latitude; // both degrees*1e7 _gps_position->lon = packet.longitude; // both degrees*1e7 + } else { warnx("mtk: unknown revision"); _gps_position->lat = 0; _gps_position->lon = 0; } + _gps_position->alt = (int32_t)(packet.msl_altitude * 10); // from cm to mm _gps_position->fix_type = packet.fix_type; _gps_position->eph_m = packet.hdop; // XXX: Check this because eph_m is in m and hdop is without unit _gps_position->epv_m = 0.0; //unknown in mtk custom mode - _gps_position->vel_m_s = ((float)packet.ground_speed)*1e-2f; // from cm/s to m/s + _gps_position->vel_m_s = ((float)packet.ground_speed) * 1e-2f; // from cm/s to m/s _gps_position->cog_rad = ((float)packet.heading) * M_DEG_TO_RAD_F * 1e-2f; //from deg *100 to rad _gps_position->satellites_visible = packet.satellites; diff --git a/src/drivers/gps/ubx.cpp b/src/drivers/gps/ubx.cpp index ba5d14cc4..0b25b379f 100644 --- a/src/drivers/gps/ubx.cpp +++ b/src/drivers/gps/ubx.cpp @@ -60,13 +60,14 @@ #define UBX_CONFIG_TIMEOUT 200 // ms, timeout for waiting ACK #define UBX_PACKET_TIMEOUT 2 // ms, if now data during this delay assume that full update received #define UBX_WAIT_BEFORE_READ 20 // ms, wait before reading to save read() calls +#define DISABLE_MSG_INTERVAL 1000000 // us, try to disable message with this interval UBX::UBX(const int &fd, struct vehicle_gps_position_s *gps_position) : _fd(fd), _gps_position(gps_position), _configured(false), _waiting_for_ack(false), - _disable_cmd_counter(0) + _disable_cmd_last(0) { decode_init(); } @@ -191,35 +192,35 @@ UBX::configure(unsigned &baudrate) configure_message_rate(UBX_CLASS_NAV, UBX_MESSAGE_NAV_POSLLH, 1); if (wait_for_ack(UBX_CONFIG_TIMEOUT) < 0) { - warnx("ubx: msg rate configuration failed: NAV POSLLH\n"); + warnx("ubx: msg rate configuration failed: NAV POSLLH"); return 1; } configure_message_rate(UBX_CLASS_NAV, UBX_MESSAGE_NAV_TIMEUTC, 1); if (wait_for_ack(UBX_CONFIG_TIMEOUT) < 0) { - warnx("ubx: msg rate configuration failed: NAV TIMEUTC\n"); + warnx("ubx: msg rate configuration failed: NAV TIMEUTC"); return 1; } configure_message_rate(UBX_CLASS_NAV, UBX_MESSAGE_NAV_SOL, 1); if (wait_for_ack(UBX_CONFIG_TIMEOUT) < 0) { - warnx("ubx: msg rate configuration failed: NAV SOL\n"); + warnx("ubx: msg rate configuration failed: NAV SOL"); return 1; } configure_message_rate(UBX_CLASS_NAV, UBX_MESSAGE_NAV_VELNED, 1); if (wait_for_ack(UBX_CONFIG_TIMEOUT) < 0) { - warnx("ubx: msg rate configuration failed: NAV VELNED\n"); + warnx("ubx: msg rate configuration failed: NAV VELNED"); return 1; } configure_message_rate(UBX_CLASS_NAV, UBX_MESSAGE_NAV_SVINFO, 5); if (wait_for_ack(UBX_CONFIG_TIMEOUT) < 0) { - warnx("ubx: msg rate configuration failed: NAV SVINFO\n"); + warnx("ubx: msg rate configuration failed: NAV SVINFO"); return 1; } @@ -271,11 +272,18 @@ UBX::receive(unsigned timeout) if (ret < 0) { /* something went wrong when polling */ + warnx("ubx: poll error"); return -1; } else if (ret == 0) { /* return success after short delay after receiving a packet or timeout after long delay */ - return handled ? 1 : -1; + if (handled) { + return 1; + + } else { + warnx("ubx: timeout - no messages"); + return -1; + } } else if (ret > 0) { /* if we have new data from GPS, go handle it */ @@ -292,8 +300,6 @@ UBX::receive(unsigned timeout) /* pass received bytes to the packet decoder */ for (int i = 0; i < count; i++) { if (parse_char(buf[i]) > 0) { - /* return to configure during configuration or to the gps driver during normal work - * if a packet has arrived */ if (handle_message() > 0) handled = true; } @@ -303,6 +309,7 @@ UBX::receive(unsigned timeout) /* abort after timeout if no useful packets received */ if (time_started + timeout * 1000 < hrt_absolute_time()) { + warnx("ubx: timeout - no useful messages"); return -1; } } @@ -453,16 +460,16 @@ UBX::handle_message() timeinfo.tm_min = packet->min; timeinfo.tm_sec = packet->sec; time_t epoch = mktime(&timeinfo); - + #ifndef CONFIG_RTC - //Since we lack a hardware RTC, set the system time clock based on GPS UTC - //TODO generalize this by moving into gps.cpp? - timespec ts; - ts.tv_sec = epoch; - ts.tv_nsec = packet->time_nanoseconds; - clock_settime(CLOCK_REALTIME,&ts); + //Since we lack a hardware RTC, set the system time clock based on GPS UTC + //TODO generalize this by moving into gps.cpp? + timespec ts; + ts.tv_sec = epoch; + ts.tv_nsec = packet->time_nanoseconds; + clock_settime(CLOCK_REALTIME, &ts); #endif - + _gps_position->time_gps_usec = (uint64_t)epoch * 1000000; //TODO: test this _gps_position->time_gps_usec += (uint64_t)(packet->time_nanoseconds * 1e-3f); _gps_position->timestamp_time = hrt_absolute_time(); @@ -564,10 +571,13 @@ UBX::handle_message() if (ret == 0) { /* message not handled */ - warnx("ubx: unknown message received: 0x%02x-0x%02x\n", (unsigned)_message_class, (unsigned)_message_id); + warnx("ubx: unknown message received: 0x%02x-0x%02x", (unsigned)_message_class, (unsigned)_message_id); + + hrt_abstime t = hrt_absolute_time(); - if ((_disable_cmd_counter = _disable_cmd_counter++ % 10) == 0) { + if (t > _disable_cmd_last + DISABLE_MSG_INTERVAL) { /* don't attempt for every message to disable, some might not be disabled */ + _disable_cmd_last = t; warnx("ubx: disabling message 0x%02x-0x%02x", (unsigned)_message_class, (unsigned)_message_id); configure_message_rate(_message_class, _message_id, 0); } @@ -640,7 +650,7 @@ UBX::add_checksum_to_message(uint8_t *message, const unsigned length) ck_b = ck_b + ck_a; } - /* The checksum is written to the last to bytes of a message */ + /* the checksum is written to the last to bytes of a message */ message[length - 2] = ck_a; message[length - 1] = ck_b; } @@ -669,17 +679,17 @@ UBX::send_config_packet(const int &fd, uint8_t *packet, const unsigned length) { ssize_t ret = 0; - /* Calculate the checksum now */ + /* calculate the checksum now */ add_checksum_to_message(packet, length); const uint8_t sync_bytes[] = {UBX_SYNC1, UBX_SYNC2}; - /* Start with the two sync bytes */ + /* start with the two sync bytes */ ret += write(fd, sync_bytes, sizeof(sync_bytes)); ret += write(fd, packet, length); if (ret != (int)length + (int)sizeof(sync_bytes)) // XXX is there a neater way to get rid of the unsigned signed warning? - warnx("ubx: config write fail"); + warnx("ubx: configuration write fail"); } void @@ -696,7 +706,7 @@ UBX::send_message(uint8_t msg_class, uint8_t msg_id, void *msg, uint8_t size) add_checksum((uint8_t *)&header.msg_class, sizeof(header) - 2, ck_a, ck_b); add_checksum((uint8_t *)msg, size, ck_a, ck_b); - // Configure receive check + /* configure ACK check */ _message_class_needed = msg_class; _message_id_needed = msg_id; diff --git a/src/drivers/gps/ubx.h b/src/drivers/gps/ubx.h index 4fc276975..76ef873a3 100644 --- a/src/drivers/gps/ubx.h +++ b/src/drivers/gps/ubx.h @@ -347,7 +347,7 @@ private: /** * Add the two checksum bytes to an outgoing message */ - void add_checksum_to_message(uint8_t* message, const unsigned length); + void add_checksum_to_message(uint8_t *message, const unsigned length); /** * Helper to send a config packet @@ -358,7 +358,7 @@ private: void send_message(uint8_t msg_class, uint8_t msg_id, void *msg, uint8_t size); - void add_checksum(uint8_t* message, const unsigned length, uint8_t &ck_a, uint8_t &ck_b); + void add_checksum(uint8_t *message, const unsigned length, uint8_t &ck_a, uint8_t &ck_b); int wait_for_ack(unsigned timeout); @@ -376,7 +376,7 @@ private: uint8_t _message_class; uint8_t _message_id; unsigned _payload_size; - uint8_t _disable_cmd_counter; + uint8_t _disable_cmd_last; }; #endif /* UBX_H_ */ diff --git a/src/drivers/px4io/px4io.cpp b/src/drivers/px4io/px4io.cpp index f9fb9eea9..b66d425dd 100644 --- a/src/drivers/px4io/px4io.cpp +++ b/src/drivers/px4io/px4io.cpp @@ -2245,7 +2245,7 @@ px4io_main(int argc, char *argv[]) } PX4IO_Uploader *up; - const char *fn[5]; + const char *fn[3]; /* work out what we're uploading... */ if (argc > 2) { @@ -2253,11 +2253,19 @@ px4io_main(int argc, char *argv[]) fn[1] = nullptr; } else { +#if defined(CONFIG_ARCH_BOARD_PX4FMU_V1) + fn[0] = "/etc/extras/px4io-v1_default.bin"; + fn[1] = "/fs/microsd/px4io1.bin"; + fn[2] = "/fs/microsd/px4io.bin"; + fn[3] = nullptr; +#elif defined(CONFIG_ARCH_BOARD_PX4FMU_V2) fn[0] = "/etc/extras/px4io-v2_default.bin"; - fn[1] = "/etc/extras/px4io-v1_default.bin"; + fn[1] = "/fs/microsd/px4io2.bin"; fn[2] = "/fs/microsd/px4io.bin"; - fn[3] = "/fs/microsd/px4io2.bin"; - fn[4] = nullptr; + fn[3] = nullptr; +#else +#error "unknown board" +#endif } up = new PX4IO_Uploader; diff --git a/src/drivers/rgbled/rgbled.cpp b/src/drivers/rgbled/rgbled.cpp index ee1d472a2..fedff769b 100644 --- a/src/drivers/rgbled/rgbled.cpp +++ b/src/drivers/rgbled/rgbled.cpp @@ -1,6 +1,8 @@ /**************************************************************************** * * Copyright (C) 2012, 2013 PX4 Development Team. All rights reserved. + * Author: Julian Oes <joes@student.ethz.ch> + * Anton Babushkin <anton.babushkin@me.com> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -36,7 +38,6 @@ * * Driver for the onboard RGB LED controller (TCA62724FMG) connected via I2C. * - * */ #include <nuttx/config.h> @@ -92,16 +93,14 @@ public: private: work_s _work; - rgbled_color_t _color; rgbled_mode_t _mode; rgbled_pattern_t _pattern; - float _brightness; uint8_t _r; uint8_t _g; uint8_t _b; + float _brightness; - bool _should_run; bool _running; int _led_interval; int _counter; @@ -109,35 +108,33 @@ private: void set_color(rgbled_color_t ledcolor); void set_mode(rgbled_mode_t mode); void set_pattern(rgbled_pattern_t *pattern); - void set_brightness(float brightness); static void led_trampoline(void *arg); void led(); - int set(bool on, uint8_t r, uint8_t g, uint8_t b); - int set_on(bool on); - int set_rgb(uint8_t r, uint8_t g, uint8_t b); - int get(bool &on, bool ¬_powersave, uint8_t &r, uint8_t &g, uint8_t &b); + int send_led_enable(bool enable); + int send_led_rgb(); + int get(bool &on, bool &powersave, uint8_t &r, uint8_t &g, uint8_t &b); }; /* for now, we only support one RGBLED */ namespace { - RGBLED *g_rgbled; +RGBLED *g_rgbled; } +void rgbled_usage(); extern "C" __EXPORT int rgbled_main(int argc, char *argv[]); RGBLED::RGBLED(int bus, int rgbled) : I2C("rgbled", RGBLED_DEVICE_PATH, bus, rgbled, 100000), - _color(RGBLED_COLOR_OFF), _mode(RGBLED_MODE_OFF), - _running(false), - _brightness(1.0f), _r(0), _g(0), _b(0), + _brightness(1.0f), + _running(false), _led_interval(0), _counter(0) { @@ -159,8 +156,9 @@ RGBLED::init() return ret; } - /* start off */ - set(false, 0, 0, 0); + /* switch off LED on start */ + send_led_enable(false); + send_led_rgb(); return OK; } @@ -169,10 +167,10 @@ int RGBLED::probe() { int ret; - bool on, not_powersave; + bool on, powersave; uint8_t r, g, b; - ret = get(on, not_powersave, r, g, b); + ret = get(on, powersave, r, g, b); return ret; } @@ -181,15 +179,16 @@ int RGBLED::info() { int ret; - bool on, not_powersave; + bool on, powersave; uint8_t r, g, b; - ret = get(on, not_powersave, r, g, b); + ret = get(on, powersave, r, g, b); if (ret == OK) { /* we don't care about power-save mode */ log("state: %s", on ? "ON" : "OFF"); log("red: %u, green: %u, blue: %u", (unsigned)r, (unsigned)g, (unsigned)b); + } else { warnx("failed to read led"); } @@ -201,28 +200,30 @@ int RGBLED::ioctl(struct file *filp, int cmd, unsigned long arg) { int ret = ENOTTY; + switch (cmd) { case RGBLED_SET_RGB: - /* set the specified RGB values */ - rgbled_rgbset_t rgbset; - memcpy(&rgbset, (rgbled_rgbset_t*)arg, sizeof(rgbset)); - set_rgb(rgbset.red, rgbset.green, rgbset.blue); - set_mode(RGBLED_MODE_ON); + /* set the specified color */ + _r = ((rgbled_rgbset_t *) arg)->red; + _g = ((rgbled_rgbset_t *) arg)->green; + _b = ((rgbled_rgbset_t *) arg)->blue; + send_led_rgb(); return OK; case RGBLED_SET_COLOR: /* set the specified color name */ set_color((rgbled_color_t)arg); + send_led_rgb(); return OK; case RGBLED_SET_MODE: - /* set the specified blink speed */ + /* set the specified mode */ set_mode((rgbled_mode_t)arg); return OK; case RGBLED_SET_PATTERN: /* set a special pattern */ - set_pattern((rgbled_pattern_t*)arg); + set_pattern((rgbled_pattern_t *)arg); return OK; default: @@ -241,39 +242,54 @@ RGBLED::led_trampoline(void *arg) rgbl->led(); } - - +/** + * Main loop function + */ void RGBLED::led() { switch (_mode) { - case RGBLED_MODE_BLINK_SLOW: - case RGBLED_MODE_BLINK_NORMAL: - case RGBLED_MODE_BLINK_FAST: - if(_counter % 2 == 0) - set_on(true); - else - set_on(false); - break; - case RGBLED_MODE_BREATHE: - if (_counter >= 30) - _counter = 0; - if (_counter <= 15) { - set_brightness(((float)_counter)*((float)_counter)/(15.0f*15.0f)); - } else { - set_brightness(((float)(30-_counter))*((float)(30-_counter))/(15.0f*15.0f)); - } - break; - case RGBLED_MODE_PATTERN: - /* don't run out of the pattern array and stop if the next frame is 0 */ - if (_counter >= RGBLED_PATTERN_LENGTH || _pattern.duration[_counter] <= 0) - _counter = 0; + case RGBLED_MODE_BLINK_SLOW: + case RGBLED_MODE_BLINK_NORMAL: + case RGBLED_MODE_BLINK_FAST: + if (_counter >= 2) + _counter = 0; - set_color(_pattern.color[_counter]); - _led_interval = _pattern.duration[_counter]; - break; - default: - break; + send_led_enable(_counter == 0); + + break; + + case RGBLED_MODE_BREATHE: + + if (_counter >= 62) + _counter = 0; + + int n; + + if (_counter < 32) { + n = _counter; + + } else { + n = 62 - _counter; + } + + _brightness = n * n / (31.0f * 31.0f); + send_led_rgb(); + break; + + case RGBLED_MODE_PATTERN: + + /* don't run out of the pattern array and stop if the next frame is 0 */ + if (_counter >= RGBLED_PATTERN_LENGTH || _pattern.duration[_counter] <= 0) + _counter = 0; + + set_color(_pattern.color[_counter]); + send_led_rgb(); + _led_interval = _pattern.duration[_counter]; + break; + + default: + break; } _counter++; @@ -282,181 +298,231 @@ RGBLED::led() work_queue(LPWORK, &_work, (worker_t)&RGBLED::led_trampoline, this, _led_interval); } +/** + * Parse color constant and set _r _g _b values + */ void -RGBLED::set_color(rgbled_color_t color) { +RGBLED::set_color(rgbled_color_t color) +{ + switch (color) { + case RGBLED_COLOR_OFF: + _r = 0; + _g = 0; + _b = 0; + break; - _color = color; + case RGBLED_COLOR_RED: + _r = 255; + _g = 0; + _b = 0; + break; - switch (color) { - case RGBLED_COLOR_OFF: // off - set_rgb(0,0,0); - break; - case RGBLED_COLOR_RED: // red - set_rgb(255,0,0); - break; - case RGBLED_COLOR_YELLOW: // yellow - set_rgb(255,70,0); - break; - case RGBLED_COLOR_PURPLE: // purple - set_rgb(255,0,255); - break; - case RGBLED_COLOR_GREEN: // green - set_rgb(0,255,0); - break; - case RGBLED_COLOR_BLUE: // blue - set_rgb(0,0,255); - break; - case RGBLED_COLOR_WHITE: // white - set_rgb(255,255,255); - break; - case RGBLED_COLOR_AMBER: // amber - set_rgb(255,20,0); - break; - case RGBLED_COLOR_DIM_RED: // red - set_rgb(90,0,0); - break; - case RGBLED_COLOR_DIM_YELLOW: // yellow - set_rgb(80,30,0); - break; - case RGBLED_COLOR_DIM_PURPLE: // purple - set_rgb(45,0,45); - break; - case RGBLED_COLOR_DIM_GREEN: // green - set_rgb(0,90,0); - break; - case RGBLED_COLOR_DIM_BLUE: // blue - set_rgb(0,0,90); - break; - case RGBLED_COLOR_DIM_WHITE: // white - set_rgb(30,30,30); - break; - case RGBLED_COLOR_DIM_AMBER: // amber - set_rgb(80,20,0); - break; - default: - warnx("color unknown"); - break; + case RGBLED_COLOR_YELLOW: + _r = 255; + _g = 200; + _b = 0; + break; + + case RGBLED_COLOR_PURPLE: + _r = 255; + _g = 0; + _b = 255; + break; + + case RGBLED_COLOR_GREEN: + _r = 0; + _g = 255; + _b = 0; + break; + + case RGBLED_COLOR_BLUE: + _r = 0; + _g = 0; + _b = 255; + break; + + case RGBLED_COLOR_WHITE: + _r = 255; + _g = 255; + _b = 255; + break; + + case RGBLED_COLOR_AMBER: + _r = 255; + _g = 80; + _b = 0; + break; + + case RGBLED_COLOR_DIM_RED: + _r = 90; + _g = 0; + _b = 0; + break; + + case RGBLED_COLOR_DIM_YELLOW: + _r = 80; + _g = 30; + _b = 0; + break; + + case RGBLED_COLOR_DIM_PURPLE: + _r = 45; + _g = 0; + _b = 45; + break; + + case RGBLED_COLOR_DIM_GREEN: + _r = 0; + _g = 90; + _b = 0; + break; + + case RGBLED_COLOR_DIM_BLUE: + _r = 0; + _g = 0; + _b = 90; + break; + + case RGBLED_COLOR_DIM_WHITE: + _r = 30; + _g = 30; + _b = 30; + break; + + case RGBLED_COLOR_DIM_AMBER: + _r = 80; + _g = 20; + _b = 0; + break; + + default: + warnx("color unknown"); + break; } } +/** + * Set mode, if mode not changed has no any effect (doesn't reset blinks phase) + */ void RGBLED::set_mode(rgbled_mode_t mode) { - _mode = mode; + if (mode != _mode) { + _mode = mode; + bool should_run = false; - switch (mode) { + switch (mode) { case RGBLED_MODE_OFF: - _should_run = false; - set_on(false); + send_led_enable(false); break; + case RGBLED_MODE_ON: - _should_run = false; - set_on(true); + _brightness = 1.0f; + send_led_rgb(); + send_led_enable(true); break; + case RGBLED_MODE_BLINK_SLOW: - _should_run = true; + should_run = true; + _counter = 0; _led_interval = 2000; + _brightness = 1.0f; + send_led_rgb(); break; + case RGBLED_MODE_BLINK_NORMAL: - _should_run = true; + should_run = true; + _counter = 0; _led_interval = 500; + _brightness = 1.0f; + send_led_rgb(); break; + case RGBLED_MODE_BLINK_FAST: - _should_run = true; + should_run = true; + _counter = 0; _led_interval = 100; + _brightness = 1.0f; + send_led_rgb(); break; + case RGBLED_MODE_BREATHE: - _should_run = true; - set_on(true); + should_run = true; _counter = 0; - _led_interval = 1000/15; + _led_interval = 25; + send_led_enable(true); break; + case RGBLED_MODE_PATTERN: - _should_run = true; - set_on(true); + should_run = true; _counter = 0; + _brightness = 1.0f; + send_led_enable(true); break; + default: warnx("mode unknown"); break; - } + } - /* if it should run now, start the workq */ - if (_should_run && !_running) { - _running = true; - work_queue(LPWORK, &_work, (worker_t)&RGBLED::led_trampoline, this, 1); - } - /* if it should stop, then cancel the workq */ - if (!_should_run && _running) { - _running = false; - work_cancel(LPWORK, &_work); + /* if it should run now, start the workq */ + if (should_run && !_running) { + _running = true; + work_queue(LPWORK, &_work, (worker_t)&RGBLED::led_trampoline, this, 1); + } + + /* if it should stop, then cancel the workq */ + if (!should_run && _running) { + _running = false; + work_cancel(LPWORK, &_work); + } } } +/** + * Set pattern for PATTERN mode, but don't change current mode + */ void RGBLED::set_pattern(rgbled_pattern_t *pattern) { memcpy(&_pattern, pattern, sizeof(rgbled_pattern_t)); - - set_mode(RGBLED_MODE_PATTERN); -} - -void -RGBLED::set_brightness(float brightness) { - - _brightness = brightness; - set_rgb(_r, _g, _b); -} - -int -RGBLED::set(bool on, uint8_t r, uint8_t g, uint8_t b) -{ - uint8_t settings_byte = 0; - - if (on) - settings_byte |= SETTING_ENABLE; -/* powersave not used */ -// if (not_powersave) - settings_byte |= SETTING_NOT_POWERSAVE; - - const uint8_t msg[5] = { SUB_ADDR_START, (uint8_t)(b*15/255), (uint8_t)(g*15/255), (uint8_t)(r*15/255), settings_byte}; - - return transfer(msg, sizeof(msg), nullptr, 0); } +/** + * Sent ENABLE flag to LED driver + */ int -RGBLED::set_on(bool on) +RGBLED::send_led_enable(bool enable) { uint8_t settings_byte = 0; - if (on) + if (enable) settings_byte |= SETTING_ENABLE; -/* powersave not used */ -// if (not_powersave) - settings_byte |= SETTING_NOT_POWERSAVE; + settings_byte |= SETTING_NOT_POWERSAVE; const uint8_t msg[2] = { SUB_ADDR_SETTINGS, settings_byte}; return transfer(msg, sizeof(msg), nullptr, 0); } +/** + * Send RGB PWM settings to LED driver according to current color and brightness + */ int -RGBLED::set_rgb(uint8_t r, uint8_t g, uint8_t b) +RGBLED::send_led_rgb() { - /* save the RGB values in case we want to change the brightness later */ - _r = r; - _g = g; - _b = b; - - const uint8_t msg[6] = { SUB_ADDR_PWM0, (uint8_t)((float)b/255.0f*15.0f*_brightness), SUB_ADDR_PWM1, (uint8_t)((float)g/255.0f*15.0f*_brightness), SUB_ADDR_PWM2, (uint8_t)((float)r/255.0f*15.0f*_brightness)}; - + /* To scale from 0..255 -> 0..15 shift right by 4 bits */ + const uint8_t msg[6] = { + SUB_ADDR_PWM0, (uint8_t)((int)(_b * _brightness) >> 4), + SUB_ADDR_PWM1, (uint8_t)((int)(_g * _brightness) >> 4), + SUB_ADDR_PWM2, (uint8_t)((int)(_r * _brightness) >> 4) + }; return transfer(msg, sizeof(msg), nullptr, 0); } - int -RGBLED::get(bool &on, bool ¬_powersave, uint8_t &r, uint8_t &g, uint8_t &b) +RGBLED::get(bool &on, bool &powersave, uint8_t &r, uint8_t &g, uint8_t &b) { uint8_t result[2]; int ret; @@ -465,24 +531,23 @@ RGBLED::get(bool &on, bool ¬_powersave, uint8_t &r, uint8_t &g, uint8_t &b) if (ret == OK) { on = result[0] & SETTING_ENABLE; - not_powersave = result[0] & SETTING_NOT_POWERSAVE; + powersave = !(result[0] & SETTING_NOT_POWERSAVE); /* XXX check, looks wrong */ - r = (result[0] & 0x0f)*255/15; - g = (result[1] & 0xf0)*255/15; - b = (result[1] & 0x0f)*255/15; + r = (result[0] & 0x0f) << 4; + g = (result[1] & 0xf0); + b = (result[1] & 0x0f) << 4; } return ret; } -void rgbled_usage(); - - -void rgbled_usage() { - warnx("missing command: try 'start', 'test', 'info', 'stop'/'off', 'rgb 30 40 50'"); +void +rgbled_usage() +{ + warnx("missing command: try 'start', 'test', 'info', 'off', 'rgb 30 40 50'"); warnx("options:"); warnx(" -b i2cbus (%d)", PX4_I2C_BUS_LED); - errx(0, " -a addr (0x%x)", ADDR); + warnx(" -a addr (0x%x)", ADDR); } int @@ -492,17 +557,21 @@ rgbled_main(int argc, char *argv[]) int rgbledadr = ADDR; /* 7bit */ int ch; + /* jump over start/off/etc and look at options first */ - while ((ch = getopt(argc-1, &argv[1], "a:b:")) != EOF) { + while ((ch = getopt(argc - 1, &argv[1], "a:b:")) != EOF) { switch (ch) { case 'a': rgbledadr = strtol(optarg, NULL, 0); break; + case 'b': i2cdevice = strtol(optarg, NULL, 0); break; + default: rgbled_usage(); + exit(0); } } @@ -519,17 +588,21 @@ rgbled_main(int argc, char *argv[]) // try the external bus first i2cdevice = PX4_I2C_BUS_EXPANSION; g_rgbled = new RGBLED(PX4_I2C_BUS_EXPANSION, rgbledadr); + if (g_rgbled != nullptr && OK != g_rgbled->init()) { delete g_rgbled; g_rgbled = nullptr; } + if (g_rgbled == nullptr) { // fall back to default bus i2cdevice = PX4_I2C_BUS_LED; } } + if (g_rgbled == nullptr) { g_rgbled = new RGBLED(i2cdevice, rgbledadr); + if (g_rgbled == nullptr) errx(1, "new failed"); @@ -545,21 +618,24 @@ rgbled_main(int argc, char *argv[]) /* need the driver past this point */ if (g_rgbled == nullptr) { - warnx("not started"); - rgbled_usage(); - exit(0); + warnx("not started"); + rgbled_usage(); + exit(0); } if (!strcmp(verb, "test")) { fd = open(RGBLED_DEVICE_PATH, 0); + if (fd == -1) { errx(1, "Unable to open " RGBLED_DEVICE_PATH); } - rgbled_pattern_t pattern = { {RGBLED_COLOR_RED, RGBLED_COLOR_GREEN, RGBLED_COLOR_BLUE, RGBLED_COLOR_OFF}, - {200, 200, 200, 400 } }; + rgbled_pattern_t pattern = { {RGBLED_COLOR_RED, RGBLED_COLOR_GREEN, RGBLED_COLOR_BLUE, RGBLED_COLOR_WHITE, RGBLED_COLOR_OFF, RGBLED_COLOR_OFF}, + {500, 500, 500, 500, 1000, 0 } // "0" indicates end of pattern + }; ret = ioctl(fd, RGBLED_SET_PATTERN, (unsigned long)&pattern); + ret = ioctl(fd, RGBLED_SET_MODE, (unsigned long)RGBLED_MODE_PATTERN); close(fd); exit(ret); @@ -570,33 +646,39 @@ rgbled_main(int argc, char *argv[]) exit(0); } - if (!strcmp(verb, "stop") || !strcmp(verb, "off")) { - /* although technically it doesn't stop, this is the excepted syntax */ + if (!strcmp(verb, "off")) { fd = open(RGBLED_DEVICE_PATH, 0); + if (fd == -1) { errx(1, "Unable to open " RGBLED_DEVICE_PATH); } + ret = ioctl(fd, RGBLED_SET_MODE, (unsigned long)RGBLED_MODE_OFF); close(fd); exit(ret); } if (!strcmp(verb, "rgb")) { + if (argc < 5) { + errx(1, "Usage: rgbled rgb <red> <green> <blue>"); + } + fd = open(RGBLED_DEVICE_PATH, 0); + if (fd == -1) { errx(1, "Unable to open " RGBLED_DEVICE_PATH); } - if (argc < 5) { - errx(1, "Usage: rgbled rgb <red> <green> <blue>"); - } + rgbled_rgbset_t v; v.red = strtol(argv[2], NULL, 0); v.green = strtol(argv[3], NULL, 0); v.blue = strtol(argv[4], NULL, 0); ret = ioctl(fd, RGBLED_SET_RGB, (unsigned long)&v); + ret = ioctl(fd, RGBLED_SET_MODE, (unsigned long)RGBLED_MODE_ON); close(fd); exit(ret); } rgbled_usage(); + exit(0); } diff --git a/src/modules/commander/commander.cpp b/src/modules/commander/commander.cpp index a2443b0f6..1e86e8e24 100644 --- a/src/modules/commander/commander.cpp +++ b/src/modules/commander/commander.cpp @@ -5,6 +5,7 @@ * Lorenz Meier <lm@inf.ethz.ch> * Thomas Gubler <thomasgubler@student.ethz.ch> * Julian Oes <joes@student.ethz.ch> + * Anton Babushkin <anton.babushkin@me.com> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -198,7 +199,7 @@ void handle_command(struct vehicle_status_s *status, struct vehicle_control_mode */ int commander_thread_main(int argc, char *argv[]); -void toggle_status_leds(vehicle_status_s *status, actuator_armed_s *armed, bool changed); +void control_status_leds(vehicle_status_s *status, actuator_armed_s *armed, bool changed); void check_valid(hrt_abstime timestamp, hrt_abstime timeout, bool valid_in, bool *valid_out, bool *changed); @@ -650,7 +651,6 @@ int commander_thread_main(int argc, char *argv[]) bool critical_battery_voltage_actions_done = false; uint64_t last_idle_time = 0; - uint64_t start_time = 0; bool status_changed = true; @@ -728,7 +728,7 @@ int commander_thread_main(int argc, char *argv[]) struct subsystem_info_s info; memset(&info, 0, sizeof(info)); - toggle_status_leds(&status, &armed, true); + control_status_leds(&status, &armed, true); /* now initialized */ commander_initialized = true; @@ -950,11 +950,9 @@ int commander_thread_main(int argc, char *argv[]) battery_tune_played = false; if (armed.armed) { - // XXX not sure what should happen when voltage is low in flight - //arming_state_transition(&status, &safety, ARMING_STATE_ARMED_ERROR, &armed); + arming_state_transition(&status, &safety, ARMING_STATE_ARMED_ERROR, &armed); } else { - // XXX should we still allow to arm with critical battery? - //arming_state_transition(&status, &safety, ARMING_STATE_STANDBY_ERROR, &armed); + arming_state_transition(&status, &safety, ARMING_STATE_STANDBY_ERROR, &armed); } status_changed = true; @@ -1166,9 +1164,6 @@ int commander_thread_main(int argc, char *argv[]) if (arming_state_changed || main_state_changed || navigation_state_changed) { mavlink_log_info(mavlink_fd, "[cmd] state: arm %d, main %d, nav %d", status.arming_state, status.main_state, status.navigation_state); status_changed = true; - - } else { - status_changed = false; } hrt_abstime t1 = hrt_absolute_time(); @@ -1228,7 +1223,19 @@ int commander_thread_main(int argc, char *argv[]) fflush(stdout); counter++; - toggle_status_leds(&status, &armed, arming_state_changed || status_changed); + int blink_state = blink_msg_state(); + if (blink_state > 0) { + /* blinking LED message, don't touch LEDs */ + if (blink_state == 2) { + /* blinking LED message completed, restore normal state */ + control_status_leds(&status, &armed, true); + } + } else { + /* normal state */ + control_status_leds(&status, &armed, status_changed); + } + + status_changed = false; usleep(COMMANDER_MONITORING_INTERVAL); } @@ -1276,8 +1283,48 @@ check_valid(hrt_abstime timestamp, hrt_abstime timeout, bool valid_in, bool *val } void -toggle_status_leds(vehicle_status_s *status, actuator_armed_s *armed, bool changed) +control_status_leds(vehicle_status_s *status, actuator_armed_s *armed, bool changed) { + /* driving rgbled */ + if (changed) { + bool set_normal_color = false; + /* set mode */ + if (status->arming_state == ARMING_STATE_ARMED) { + rgbled_set_mode(RGBLED_MODE_ON); + set_normal_color = true; + + } else if (status->arming_state == ARMING_STATE_ARMED_ERROR) { + rgbled_set_mode(RGBLED_MODE_BLINK_FAST); + rgbled_set_color(RGBLED_COLOR_RED); + + } else if (status->arming_state == ARMING_STATE_STANDBY) { + rgbled_set_mode(RGBLED_MODE_BREATHE); + set_normal_color = true; + + } else { // STANDBY_ERROR and other states + rgbled_set_mode(RGBLED_MODE_BLINK_NORMAL); + rgbled_set_color(RGBLED_COLOR_RED); + } + + if (set_normal_color) { + /* set color */ + if (status->battery_warning != VEHICLE_BATTERY_WARNING_NONE) { + if (status->battery_warning == VEHICLE_BATTERY_WARNING_LOW) { + rgbled_set_color(RGBLED_COLOR_AMBER); + } + /* VEHICLE_BATTERY_WARNING_CRITICAL handled as ARMING_STATE_ARMED_ERROR / ARMING_STATE_STANDBY_ERROR */ + + } else { + if (status->condition_local_position_valid) { + rgbled_set_color(RGBLED_COLOR_GREEN); + + } else { + rgbled_set_color(RGBLED_COLOR_BLUE); + } + } + } + } + #ifdef CONFIG_ARCH_BOARD_PX4FMU_V1 /* this runs at around 20Hz, full cycle is 16 ticks = 10/16Hz */ @@ -1298,54 +1345,6 @@ toggle_status_leds(vehicle_status_s *status, actuator_armed_s *armed, bool chang #endif - if (changed) { - /* XXX TODO blink fast when armed and serious error occurs */ - - if (armed->armed) { - rgbled_set_mode(RGBLED_MODE_ON); - - } else if (armed->ready_to_arm) { - rgbled_set_mode(RGBLED_MODE_BREATHE); - - } else { - rgbled_set_mode(RGBLED_MODE_BLINK_FAST); - } - } - - if (status->battery_warning != VEHICLE_BATTERY_WARNING_NONE) { - switch (status->battery_warning) { - case VEHICLE_BATTERY_WARNING_LOW: - rgbled_set_color(RGBLED_COLOR_YELLOW); - break; - - case VEHICLE_BATTERY_WARNING_CRITICAL: - rgbled_set_color(RGBLED_COLOR_AMBER); - break; - - default: - break; - } - - } else { - switch (status->main_state) { - case MAIN_STATE_MANUAL: - rgbled_set_color(RGBLED_COLOR_WHITE); - break; - - case MAIN_STATE_SEATBELT: - case MAIN_STATE_EASY: - rgbled_set_color(RGBLED_COLOR_GREEN); - break; - - case MAIN_STATE_AUTO: - rgbled_set_color(RGBLED_COLOR_BLUE); - break; - - default: - break; - } - } - /* give system warnings on error LED, XXX maybe add memory usage warning too */ if (status->load > 0.95f) { if (leds_counter % 2 == 0) diff --git a/src/modules/commander/commander_helper.cpp b/src/modules/commander/commander_helper.cpp index 017499cb5..565b4b66a 100644 --- a/src/modules/commander/commander_helper.cpp +++ b/src/modules/commander/commander_helper.cpp @@ -3,6 +3,7 @@ * Copyright (C) 2013 PX4 Development Team. All rights reserved. * Author: Thomas Gubler <thomasgubler@student.ethz.ch> * Julian Oes <joes@student.ethz.ch> + * Anton Babushkin <anton.babushkin@me.com> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -55,7 +56,6 @@ #include <drivers/drv_led.h> #include <drivers/drv_rgbled.h> - #include "commander_helper.h" /* oddly, ERROR is not defined for c++ */ @@ -64,21 +64,24 @@ #endif static const int ERROR = -1; +#define BLINK_MSG_TIME 700000 // 3 fast blinks + bool is_multirotor(const struct vehicle_status_s *current_status) { return ((current_status->system_type == VEHICLE_TYPE_QUADROTOR) || - (current_status->system_type == VEHICLE_TYPE_HEXAROTOR) || - (current_status->system_type == VEHICLE_TYPE_OCTOROTOR) || - (current_status->system_type == VEHICLE_TYPE_TRICOPTER)); + (current_status->system_type == VEHICLE_TYPE_HEXAROTOR) || + (current_status->system_type == VEHICLE_TYPE_OCTOROTOR) || + (current_status->system_type == VEHICLE_TYPE_TRICOPTER)); } bool is_rotary_wing(const struct vehicle_status_s *current_status) { return is_multirotor(current_status) || (current_status->system_type == VEHICLE_TYPE_HELICOPTER) - || (current_status->system_type == VEHICLE_TYPE_COAXIAL); + || (current_status->system_type == VEHICLE_TYPE_COAXIAL); } static int buzzer; +static hrt_abstime blink_msg_end; int buzzer_init() { @@ -104,16 +107,25 @@ void tune_error() void tune_positive() { + blink_msg_end = hrt_absolute_time() + BLINK_MSG_TIME; + rgbled_set_color(RGBLED_COLOR_GREEN); + rgbled_set_mode(RGBLED_MODE_BLINK_FAST); ioctl(buzzer, TONE_SET_ALARM, TONE_NOTIFY_POSITIVE_TUNE); } void tune_neutral() { + blink_msg_end = hrt_absolute_time() + BLINK_MSG_TIME; + rgbled_set_color(RGBLED_COLOR_WHITE); + rgbled_set_mode(RGBLED_MODE_BLINK_FAST); ioctl(buzzer, TONE_SET_ALARM, TONE_NOTIFY_NEUTRAL_TUNE); } void tune_negative() { + blink_msg_end = hrt_absolute_time() + BLINK_MSG_TIME; + rgbled_set_color(RGBLED_COLOR_RED); + rgbled_set_mode(RGBLED_MODE_BLINK_FAST); ioctl(buzzer, TONE_SET_ALARM, TONE_NOTIFY_NEGATIVE_TUNE); } @@ -132,18 +144,31 @@ int tune_critical_bat() return ioctl(buzzer, TONE_SET_ALARM, TONE_BATTERY_WARNING_FAST_TUNE); } - - void tune_stop() { ioctl(buzzer, TONE_SET_ALARM, TONE_STOP_TUNE); } +int blink_msg_state() +{ + if (blink_msg_end == 0) { + return 0; + + } else if (hrt_absolute_time() > blink_msg_end) { + return 2; + + } else { + return 1; + } +} + static int leds; static int rgbleds; int led_init() { + blink_msg_end = 0; + /* first open normal LEDs */ leds = open(LED_DEVICE_PATH, 0); @@ -159,6 +184,7 @@ int led_init() warnx("Blue LED: ioctl fail\n"); return ERROR; } + #endif if (ioctl(leds, LED_ON, LED_AMBER)) { @@ -168,6 +194,7 @@ int led_init() /* then try RGB LEDs, this can fail on FMUv1*/ rgbleds = open(RGBLED_DEVICE_PATH, 0); + if (rgbleds == -1) { #ifdef CONFIG_ARCH_BOARD_PX4FMU_V2 errx(1, "Unable to open " RGBLED_DEVICE_PATH); @@ -203,19 +230,22 @@ int led_off(int led) return ioctl(leds, LED_OFF, led); } -void rgbled_set_color(rgbled_color_t color) { +void rgbled_set_color(rgbled_color_t color) +{ if (rgbleds != -1) ioctl(rgbleds, RGBLED_SET_COLOR, (unsigned long)color); } -void rgbled_set_mode(rgbled_mode_t mode) { +void rgbled_set_mode(rgbled_mode_t mode) +{ if (rgbleds != -1) ioctl(rgbleds, RGBLED_SET_MODE, (unsigned long)mode); } -void rgbled_set_pattern(rgbled_pattern_t *pattern) { +void rgbled_set_pattern(rgbled_pattern_t *pattern) +{ if (rgbleds != -1) ioctl(rgbleds, RGBLED_SET_PATTERN, (unsigned long)pattern); diff --git a/src/modules/commander/commander_helper.h b/src/modules/commander/commander_helper.h index 027d0535f..e9514446c 100644 --- a/src/modules/commander/commander_helper.h +++ b/src/modules/commander/commander_helper.h @@ -62,6 +62,7 @@ int tune_arm(void); int tune_low_bat(void); int tune_critical_bat(void); void tune_stop(void); +int blink_msg_state(); int led_init(void); void led_deinit(void); @@ -70,9 +71,7 @@ int led_on(int led); int led_off(int led); void rgbled_set_color(rgbled_color_t color); - void rgbled_set_mode(rgbled_mode_t mode); - void rgbled_set_pattern(rgbled_pattern_t *pattern); /** diff --git a/src/modules/mavlink/mavlink_receiver.cpp b/src/modules/mavlink/mavlink_receiver.cpp index 222d1f45f..a3ef1d63b 100644 --- a/src/modules/mavlink/mavlink_receiver.cpp +++ b/src/modules/mavlink/mavlink_receiver.cpp @@ -574,6 +574,7 @@ handle_message(mavlink_message_t *msg) orb_publish(ORB_ID(airspeed), pub_hil_airspeed, &airspeed); } + hil_global_pos.valid = true; hil_global_pos.lat = hil_state.lat; hil_global_pos.lon = hil_state.lon; hil_global_pos.alt = hil_state.alt / 1000.0f; diff --git a/src/modules/mavlink/orb_listener.c b/src/modules/mavlink/orb_listener.c index d11a67fc6..cec2fdc43 100644 --- a/src/modules/mavlink/orb_listener.c +++ b/src/modules/mavlink/orb_listener.c @@ -99,6 +99,8 @@ struct listener { uintptr_t arg; }; +uint16_t cm_uint16_from_m_float(float m); + static void l_sensor_combined(const struct listener *l); static void l_vehicle_attitude(const struct listener *l); static void l_vehicle_gps_position(const struct listener *l); @@ -150,6 +152,19 @@ static const struct listener listeners[] = { static const unsigned n_listeners = sizeof(listeners) / sizeof(listeners[0]); +uint16_t +cm_uint16_from_m_float(float m) +{ + if (m < 0.0f) { + return 0; + + } else if (m > 655.35f) { + return 65535; + } + + return (uint16_t)(m * 100.0f); +} + void l_sensor_combined(const struct listener *l) { @@ -235,8 +250,10 @@ l_vehicle_gps_position(const struct listener *l) /* GPS COG is 0..2PI in degrees * 1e2 */ float cog_deg = gps.cog_rad; + if (cog_deg > M_PI_F) cog_deg -= 2.0f * M_PI_F; + cog_deg *= M_RAD_TO_DEG_F; @@ -247,10 +264,10 @@ l_vehicle_gps_position(const struct listener *l) gps.lat, gps.lon, gps.alt, - gps.eph_m * 1e2f, // from m to cm - gps.epv_m * 1e2f, // from m to cm + cm_uint16_from_m_float(gps.eph_m), + cm_uint16_from_m_float(gps.epv_m), gps.vel_m_s * 1e2f, // from m/s to cm/s - cog_deg * 1e2f, // from rad to deg * 100 + cog_deg * 1e2f, // from deg to deg * 100 gps.satellites_visible); /* update SAT info every 10 seconds */ diff --git a/src/modules/systemlib/param/param.c b/src/modules/systemlib/param/param.c index 59cbcf5fb..ccdb2ea38 100644 --- a/src/modules/systemlib/param/param.c +++ b/src/modules/systemlib/param/param.c @@ -509,31 +509,57 @@ int param_save_default(void) { int result; + unsigned retries = 0; /* delete the file in case it exists */ struct stat buffer; if (stat(param_get_default_file(), &buffer) == 0) { - result = unlink(param_get_default_file()); + + do { + result = unlink(param_get_default_file()); + if (result != 0) { + retries++; + usleep(1000 * retries); + } + } while (result != OK && retries < 10); + if (result != OK) warnx("unlinking file %s failed.", param_get_default_file()); } /* create the file */ - int fd = open(param_get_default_file(), O_WRONLY | O_CREAT | O_EXCL); + int fd; - if (fd < 0) { + do { /* do another attempt in case the unlink call is not synced yet */ - usleep(5000); fd = open(param_get_default_file(), O_WRONLY | O_CREAT | O_EXCL); + if (fd < 0) { + retries++; + usleep(1000 * retries); + } + } while (fd < 0 && retries < 10); + + if (fd < 0) { + warn("opening '%s' for writing failed", param_get_default_file()); return fd; } - result = param_export(fd, false); + do { + result = param_export(fd, false); + + if (result != OK) { + retries++; + usleep(1000 * retries); + } + + } while (result != 0 && retries < 10); + + close(fd); - if (result != 0) { + if (result != OK) { warn("error exporting parameters to '%s'", param_get_default_file()); (void)unlink(param_get_default_file()); return result; |