diff options
37 files changed, 3630 insertions, 225 deletions
diff --git a/ROMFS/px4fmu_common/mixers/IO_pass.mix b/ROMFS/px4fmu_common/mixers/IO_pass.mix new file mode 100644 index 000000000..39f875ddb --- /dev/null +++ b/ROMFS/px4fmu_common/mixers/IO_pass.mix @@ -0,0 +1,38 @@ +Passthrough mixer for PX4IO +============================ + +This file defines passthrough mixers suitable for testing. + +Channel group 0, channels 0-7 are passed directly through to the outputs. + +M: 1 +O: 10000 10000 0 -10000 10000 +S: 0 0 10000 10000 0 -10000 10000 + +M: 1 +O: 10000 10000 0 -10000 10000 +S: 0 1 10000 10000 0 -10000 10000 + +M: 1 +O: 10000 10000 0 -10000 10000 +S: 0 2 10000 10000 0 -10000 10000 + +M: 1 +O: 10000 10000 0 -10000 10000 +S: 0 3 10000 10000 0 -10000 10000 + +M: 1 +O: 10000 10000 0 -10000 10000 +S: 0 4 10000 10000 0 -10000 10000 + +M: 1 +O: 10000 10000 0 -10000 10000 +S: 0 5 10000 10000 0 -10000 10000 + +M: 1 +O: 10000 10000 0 -10000 10000 +S: 0 6 10000 10000 0 -10000 10000 + +M: 1 +O: 10000 10000 0 -10000 10000 +S: 0 7 10000 10000 0 -10000 10000 diff --git a/Tools/sdlog2_dump.py b/Tools/sdlog2_dump.py new file mode 100644 index 000000000..318f72971 --- /dev/null +++ b/Tools/sdlog2_dump.py @@ -0,0 +1,293 @@ +#!/usr/bin/env python + +"""Dump binary log generated by sdlog2 or APM as CSV + +Usage: python sdlog2_dump.py <log.bin> [-v] [-e] [-d delimiter] [-n null] [-m MSG[.field1,field2,...]] + + -v Use plain debug output instead of CSV. + + -e Recover from errors. + + -d Use "delimiter" in CSV. Default is ",". + + -n Use "null" as placeholder for empty values in CSV. Default is empty. + + -m MSG[.field1,field2,...] + Dump only messages of specified type, and only specified fields. + Multiple -m options allowed.""" + +__author__ = "Anton Babushkin" +__version__ = "1.2" + +import struct, sys + +class SDLog2Parser: + BLOCK_SIZE = 8192 + MSG_HEADER_LEN = 3 + MSG_HEAD1 = 0xA3 + MSG_HEAD2 = 0x95 + MSG_FORMAT_PACKET_LEN = 89 + MSG_FORMAT_STRUCT = "BB4s16s64s" + MSG_TYPE_FORMAT = 0x80 + FORMAT_TO_STRUCT = { + "b": ("b", None), + "B": ("B", None), + "h": ("h", None), + "H": ("H", None), + "i": ("i", None), + "I": ("I", None), + "f": ("f", None), + "n": ("4s", None), + "N": ("16s", None), + "Z": ("64s", None), + "c": ("h", 0.01), + "C": ("H", 0.01), + "e": ("i", 0.01), + "E": ("I", 0.01), + "L": ("i", 0.0000001), + "M": ("b", None), + "q": ("q", None), + "Q": ("Q", None), + } + __csv_delim = "," + __csv_null = "" + __msg_filter = [] + __time_msg = None + __debug_out = False + __correct_errors = False + + def __init__(self): + return + + def reset(self): + self.__msg_descrs = {} # message descriptions by message type map + self.__msg_labels = {} # message labels by message name map + self.__msg_names = [] # message names in the same order as FORMAT messages + self.__buffer = "" # buffer for input binary data + self.__ptr = 0 # read pointer in buffer + self.__csv_columns = [] # CSV file columns in correct order in format "MSG.label" + self.__csv_data = {} # current values for all columns + self.__csv_updated = False + self.__msg_filter_map = {} # filter in form of map, with '*" expanded to full list of fields + + def setCSVDelimiter(self, csv_delim): + self.__csv_delim = csv_delim + + def setCSVNull(self, csv_null): + self.__csv_null = csv_null + + def setMsgFilter(self, msg_filter): + self.__msg_filter = msg_filter + + def setTimeMsg(self, time_msg): + self.__time_msg = time_msg + + def setDebugOut(self, debug_out): + self.__debug_out = debug_out + + def setCorrectErrors(self, correct_errors): + self.__correct_errors = correct_errors + + def process(self, fn): + self.reset() + if self.__debug_out: + # init __msg_filter_map + for msg_name, show_fields in self.__msg_filter: + self.__msg_filter_map[msg_name] = show_fields + first_data_msg = True + f = open(fn, "r") + bytes_read = 0 + while True: + chunk = f.read(self.BLOCK_SIZE) + if len(chunk) == 0: + break + self.__buffer = self.__buffer[self.__ptr:] + chunk + self.__ptr = 0 + while self.__bytesLeft() >= self.MSG_HEADER_LEN: + head1 = ord(self.__buffer[self.__ptr]) + head2 = ord(self.__buffer[self.__ptr+1]) + if (head1 != self.MSG_HEAD1 or head2 != self.MSG_HEAD2): + if self.__correct_errors: + self.__ptr += 1 + continue + else: + raise Exception("Invalid header at %i (0x%X): %02X %02X, must be %02X %02X" % (bytes_read + self.__ptr, bytes_read + self.__ptr, head1, head2, self.MSG_HEAD1, self.MSG_HEAD2)) + msg_type = ord(self.__buffer[self.__ptr+2]) + if msg_type == self.MSG_TYPE_FORMAT: + # parse FORMAT message + if self.__bytesLeft() < self.MSG_FORMAT_PACKET_LEN: + break + self.__parseMsgDescr() + else: + # parse data message + msg_descr = self.__msg_descrs[msg_type] + if msg_descr == None: + raise Exception("Unknown msg type: %i" % msg_type) + msg_length = msg_descr[0] + if self.__bytesLeft() < msg_length: + break + if first_data_msg: + # build CSV columns and init data map + self.__initCSV() + first_data_msg = False + self.__parseMsg(msg_descr) + bytes_read += self.__ptr + if not self.__debug_out and self.__time_msg != None and self.__csv_updated: + self.__printCSVRow() + f.close() + + def __bytesLeft(self): + return len(self.__buffer) - self.__ptr + + def __filterMsg(self, msg_name): + show_fields = "*" + if len(self.__msg_filter_map) > 0: + show_fields = self.__msg_filter_map.get(msg_name) + return show_fields + + def __initCSV(self): + if len(self.__msg_filter) == 0: + for msg_name in self.__msg_names: + self.__msg_filter.append((msg_name, "*")) + for msg_name, show_fields in self.__msg_filter: + if show_fields == "*": + show_fields = self.__msg_labels.get(msg_name, []) + self.__msg_filter_map[msg_name] = show_fields + for field in show_fields: + full_label = msg_name + "." + field + self.__csv_columns.append(full_label) + self.__csv_data[full_label] = None + print self.__csv_delim.join(self.__csv_columns) + + def __printCSVRow(self): + s = [] + for full_label in self.__csv_columns: + v = self.__csv_data[full_label] + if v == None: + v = self.__csv_null + else: + v = str(v) + s.append(v) + print self.__csv_delim.join(s) + + def __parseMsgDescr(self): + data = struct.unpack(self.MSG_FORMAT_STRUCT, self.__buffer[self.__ptr + 3 : self.__ptr + self.MSG_FORMAT_PACKET_LEN]) + msg_type = data[0] + if msg_type != self.MSG_TYPE_FORMAT: + msg_length = data[1] + msg_name = data[2].strip("\0") + msg_format = data[3].strip("\0") + msg_labels = data[4].strip("\0").split(",") + # Convert msg_format to struct.unpack format string + msg_struct = "" + msg_mults = [] + for c in msg_format: + try: + f = self.FORMAT_TO_STRUCT[c] + msg_struct += f[0] + msg_mults.append(f[1]) + except KeyError as e: + raise Exception("Unsupported format char: %s in message %s (%i)" % (c, msg_name, msg_type)) + msg_struct = "<" + msg_struct # force little-endian + self.__msg_descrs[msg_type] = (msg_length, msg_name, msg_format, msg_labels, msg_struct, msg_mults) + self.__msg_labels[msg_name] = msg_labels + self.__msg_names.append(msg_name) + if self.__debug_out: + if self.__filterMsg(msg_name) != None: + print "MSG FORMAT: type = %i, length = %i, name = %s, format = %s, labels = %s, struct = %s, mults = %s" % ( + msg_type, msg_length, msg_name, msg_format, str(msg_labels), msg_struct, msg_mults) + self.__ptr += self.MSG_FORMAT_PACKET_LEN + + def __parseMsg(self, msg_descr): + msg_length, msg_name, msg_format, msg_labels, msg_struct, msg_mults = msg_descr + if not self.__debug_out and self.__time_msg != None and msg_name == self.__time_msg and self.__csv_updated: + self.__printCSVRow() + self.__csv_updated = False + show_fields = self.__filterMsg(msg_name) + if (show_fields != None): + data = list(struct.unpack(msg_struct, self.__buffer[self.__ptr+self.MSG_HEADER_LEN:self.__ptr+msg_length])) + for i in xrange(len(data)): + if type(data[i]) is str: + data[i] = data[i].strip("\0") + m = msg_mults[i] + if m != None: + data[i] = data[i] * m + if self.__debug_out: + s = [] + for i in xrange(len(data)): + label = msg_labels[i] + if show_fields == "*" or label in show_fields: + s.append(label + "=" + str(data[i])) + print "MSG %s: %s" % (msg_name, ", ".join(s)) + else: + # update CSV data buffer + for i in xrange(len(data)): + label = msg_labels[i] + if label in show_fields: + self.__csv_data[msg_name + "." + label] = data[i] + if self.__time_msg != None and msg_name != self.__time_msg: + self.__csv_updated = True + if self.__time_msg == None: + self.__printCSVRow() + self.__ptr += msg_length + +def _main(): + if len(sys.argv) < 2: + print "Usage: python sdlog2_dump.py <log.bin> [-v] [-e] [-d delimiter] [-n null] [-m MSG[.field1,field2,...]] [-t TIME_MSG_NAME]\n" + print "\t-v\tUse plain debug output instead of CSV.\n" + print "\t-e\tRecover from errors.\n" + print "\t-d\tUse \"delimiter\" in CSV. Default is \",\".\n" + print "\t-n\tUse \"null\" as placeholder for empty values in CSV. Default is empty.\n" + print "\t-m MSG[.field1,field2,...]\n\t\tDump only messages of specified type, and only specified fields.\n\t\tMultiple -m options allowed." + print "\t-t\tSpecify TIME message name to group data messages by time and significantly reduce duplicate output.\n" + return + fn = sys.argv[1] + debug_out = False + correct_errors = False + msg_filter = [] + csv_null = "" + csv_delim = "," + time_msg = None + opt = None + for arg in sys.argv[2:]: + if opt != None: + if opt == "d": + csv_delim = arg + elif opt == "n": + csv_null = arg + elif opt == "t": + time_msg = arg + elif opt == "m": + show_fields = "*" + a = arg.split(".") + if len(a) > 1: + show_fields = a[1].split(",") + msg_filter.append((a[0], show_fields)) + opt = None + else: + if arg == "-v": + debug_out = True + elif arg == "-e": + correct_errors = True + elif arg == "-d": + opt = "d" + elif arg == "-n": + opt = "n" + elif arg == "-m": + opt = "m" + elif arg == "-t": + opt = "t" + + if csv_delim == "\\t": + csv_delim = "\t" + parser = SDLog2Parser() + parser.setCSVDelimiter(csv_delim) + parser.setCSVNull(csv_null) + parser.setMsgFilter(msg_filter) + parser.setTimeMsg(time_msg) + parser.setDebugOut(debug_out) + parser.setCorrectErrors(correct_errors) + parser.process(fn) + +if __name__ == "__main__": + _main() diff --git a/makefiles/config_px4fmu_default.mk b/makefiles/config_px4fmu_default.mk index 7a73d1a32..07ed5e633 100644 --- a/makefiles/config_px4fmu_default.mk +++ b/makefiles/config_px4fmu_default.mk @@ -62,7 +62,8 @@ MODULES += modules/gpio_led # Estimation modules (EKF / other filters) # MODULES += modules/attitude_estimator_ekf -MODULES += modules/position_estimator_mc +MODULES += modules/attitude_estimator_so3_comp +#MODULES += modules/position_estimator_mc MODULES += modules/position_estimator MODULES += modules/att_pos_estimator_ekf MODULES += modules/position_estimator_inav @@ -80,6 +81,7 @@ MODULES += modules/multirotor_pos_control # Logging # MODULES += modules/sdlog +MODULES += modules/sdlog2 # # Library modules diff --git a/makefiles/firmware.mk b/makefiles/firmware.mk index 6b09e6ec3..f1c1b496a 100644 --- a/makefiles/firmware.mk +++ b/makefiles/firmware.mk @@ -177,6 +177,12 @@ GLOBAL_DEPS += $(MAKEFILE_LIST) EXTRA_CLEANS = ################################################################################ +# NuttX libraries and paths +################################################################################ + +include $(PX4_MK_DIR)/nuttx.mk + +################################################################################ # Modules ################################################################################ @@ -297,12 +303,6 @@ $(LIBRARY_CLEANS): clean ################################################################################ -# NuttX libraries and paths -################################################################################ - -include $(PX4_MK_DIR)/nuttx.mk - -################################################################################ # ROMFS generation ################################################################################ diff --git a/makefiles/nuttx.mk b/makefiles/nuttx.mk index 346735a02..d283096b2 100644 --- a/makefiles/nuttx.mk +++ b/makefiles/nuttx.mk @@ -69,10 +69,14 @@ INCLUDE_DIRS += $(NUTTX_EXPORT_DIR)include \ LIB_DIRS += $(NUTTX_EXPORT_DIR)libs LIBS += -lapps -lnuttx -LINK_DEPS += $(NUTTX_EXPORT_DIR)libs/libapps.a \ +NUTTX_LIBS = $(NUTTX_EXPORT_DIR)libs/libapps.a \ $(NUTTX_EXPORT_DIR)libs/libnuttx.a +LINK_DEPS += $(NUTTX_LIBS) $(NUTTX_CONFIG_HEADER): $(NUTTX_ARCHIVE) @$(ECHO) %% Unpacking $(NUTTX_ARCHIVE) $(Q) $(UNZIP_CMD) -q -o -d $(WORK_DIR) $(NUTTX_ARCHIVE) $(Q) $(TOUCH) $@ + + $(LDSCRIPT): $(NUTTX_CONFIG_HEADER) + $(NUTTX_LIBS): $(NUTTX_CONFIG_HEADER) diff --git a/makefiles/toolchain_gnu-arm-eabi.mk b/makefiles/toolchain_gnu-arm-eabi.mk index c75a08bd1..3f4d3371a 100644 --- a/makefiles/toolchain_gnu-arm-eabi.mk +++ b/makefiles/toolchain_gnu-arm-eabi.mk @@ -50,7 +50,7 @@ OBJDUMP = $(CROSSDEV)objdump # XXX this is pulled pretty directly from the fmu Make.defs - needs cleanup -MAXOPTIMIZATION = -O3 +MAXOPTIMIZATION ?= -O3 # Base CPU flags for each of the supported architectures. # @@ -70,6 +70,14 @@ ARCHCPUFLAGS_CORTEXM3 = -mcpu=cortex-m3 \ -march=armv7-m \ -mfloat-abi=soft +ARCHINSTRUMENTATIONDEFINES_CORTEXM4F = -finstrument-functions \ + -ffixed-r10 + +ARCHINSTRUMENTATIONDEFINES_CORTEXM4 = -finstrument-functions \ + -ffixed-r10 + +ARCHINSTRUMENTATIONDEFINES_CORTEXM3 = + # Pick the right set of flags for the architecture. # ARCHCPUFLAGS = $(ARCHCPUFLAGS_$(CONFIG_ARCH)) @@ -91,8 +99,8 @@ ARCHOPTIMIZATION = $(MAXOPTIMIZATION) \ # enable precise stack overflow tracking # note - requires corresponding support in NuttX -INSTRUMENTATIONDEFINES = -finstrument-functions \ - -ffixed-r10 +INSTRUMENTATIONDEFINES = $(ARCHINSTRUMENTATIONDEFINES_$(CONFIG_ARCH)) + # Language-specific flags # ARCHCFLAGS = -std=gnu99 diff --git a/nuttx/arch/arm/src/armv7-m/Toolchain.defs b/nuttx/arch/arm/src/armv7-m/Toolchain.defs index 4de5b49f4..1ba764593 100644 --- a/nuttx/arch/arm/src/armv7-m/Toolchain.defs +++ b/nuttx/arch/arm/src/armv7-m/Toolchain.defs @@ -243,7 +243,7 @@ endif ifeq ($(CONFIG_ARMV7M_TOOLCHAIN),GNU_EABI) CROSSDEV ?= arm-none-eabi- ARCROSSDEV ?= arm-none-eabi- - MAXOPTIMIZATION = -O3 + MAXOPTIMIZATION ?= -O3 ifeq ($(CONFIG_ARCH_CORTEXM4),y) ifeq ($(CONFIG_ARCH_FPU),y) ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -march=armv7e-m -mfpu=fpv4-sp-d16 -mfloat-abi=hard diff --git a/nuttx/configs/px4fmu/common/Make.defs b/nuttx/configs/px4fmu/common/Make.defs index 756286ccb..22accee56 100644 --- a/nuttx/configs/px4fmu/common/Make.defs +++ b/nuttx/configs/px4fmu/common/Make.defs @@ -58,7 +58,7 @@ NM = $(CROSSDEV)nm OBJCOPY = $(CROSSDEV)objcopy OBJDUMP = $(CROSSDEV)objdump -MAXOPTIMIZATION = -O3 +MAXOPTIMIZATION ?= -O3 ARCHCPUFLAGS = -mcpu=cortex-m4 \ -mthumb \ -march=armv7e-m \ diff --git a/nuttx/configs/px4fmu/nsh/defconfig b/nuttx/configs/px4fmu/nsh/defconfig index 02e224302..248e508c2 100755..100644 --- a/nuttx/configs/px4fmu/nsh/defconfig +++ b/nuttx/configs/px4fmu/nsh/defconfig @@ -248,7 +248,7 @@ CONFIG_SERIAL_TERMIOS=y CONFIG_SERIAL_CONSOLE_REINIT=y CONFIG_STANDARD_SERIAL=y -CONFIG_USART1_SERIAL_CONSOLE=y +CONFIG_USART1_SERIAL_CONSOLE=n CONFIG_USART2_SERIAL_CONSOLE=n CONFIG_USART3_SERIAL_CONSOLE=n CONFIG_UART4_SERIAL_CONSOLE=n @@ -561,7 +561,7 @@ CONFIG_START_MONTH=1 CONFIG_START_DAY=1 CONFIG_GREGORIAN_TIME=n CONFIG_JULIAN_TIME=n -CONFIG_DEV_CONSOLE=y +CONFIG_DEV_CONSOLE=n CONFIG_DEV_LOWCONSOLE=n CONFIG_MUTEX_TYPES=n CONFIG_PRIORITY_INHERITANCE=y @@ -717,7 +717,7 @@ CONFIG_ARCH_BZERO=n # zero for all dynamic allocations. # CONFIG_MAX_TASKS=32 -CONFIG_MAX_TASK_ARGS=8 +CONFIG_MAX_TASK_ARGS=10 CONFIG_NPTHREAD_KEYS=4 CONFIG_NFILE_DESCRIPTORS=32 CONFIG_NFILE_STREAMS=25 @@ -925,7 +925,7 @@ CONFIG_USBDEV_TRACE_NRECORDS=512 # Size of the serial receive/transmit buffers. Default 256. # CONFIG_CDCACM=y -CONFIG_CDCACM_CONSOLE=n +CONFIG_CDCACM_CONSOLE=y #CONFIG_CDCACM_EP0MAXPACKET CONFIG_CDCACM_EPINTIN=1 #CONFIG_CDCACM_EPINTIN_FSSIZE @@ -955,7 +955,7 @@ CONFIG_CDCACM_PRODUCTSTR="PX4 FMU v1.6" # CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer # CONFIG_NSH_STRERROR - Use strerror(errno) # CONFIG_NSH_LINELEN - Maximum length of one command line -# CONFIG_NSH_MAX_ARGUMENTS - Maximum number of arguments for command line +# CONFIG_NSH_MAXARGUMENTS - Maximum number of arguments for command line # CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi # CONFIG_NSH_DISABLESCRIPT - Disable scripting support # CONFIG_NSH_DISABLEBG - Disable background commands @@ -988,7 +988,7 @@ CONFIG_NSH_BUILTIN_APPS=y CONFIG_NSH_FILEIOSIZE=512 CONFIG_NSH_STRERROR=y CONFIG_NSH_LINELEN=128 -CONFIG_NSH_MAX_ARGUMENTS=12 +CONFIG_NSH_MAXARGUMENTS=12 CONFIG_NSH_NESTDEPTH=8 CONFIG_NSH_DISABLESCRIPT=n CONFIG_NSH_DISABLEBG=n diff --git a/nuttx/configs/px4io/common/Make.defs b/nuttx/configs/px4io/common/Make.defs index 7f782b5b2..d2490d84e 100644 --- a/nuttx/configs/px4io/common/Make.defs +++ b/nuttx/configs/px4io/common/Make.defs @@ -58,7 +58,7 @@ NM = $(CROSSDEV)nm OBJCOPY = $(CROSSDEV)objcopy OBJDUMP = $(CROSSDEV)objdump -MAXOPTIMIZATION = -O3 +MAXOPTIMIZATION ?= -O3 ARCHCPUFLAGS = -mcpu=cortex-m3 \ -mthumb \ -march=armv7-m diff --git a/src/drivers/hott_telemetry/hott_telemetry_main.c b/src/drivers/hott_telemetry/hott_telemetry_main.c index a13a6ef58..1d2bdd92e 100644 --- a/src/drivers/hott_telemetry/hott_telemetry_main.c +++ b/src/drivers/hott_telemetry/hott_telemetry_main.c @@ -53,6 +53,7 @@ #include <termios.h> #include <sys/ioctl.h> #include <unistd.h> +#include <systemlib/err.h> #include <systemlib/systemlib.h> #include "messages.h" @@ -60,56 +61,44 @@ static int thread_should_exit = false; /**< Deamon exit flag */ static int thread_running = false; /**< Deamon status flag */ static int deamon_task; /**< Handle of deamon task / thread */ -static char *daemon_name = "hott_telemetry"; -static char *commandline_usage = "usage: hott_telemetry start|status|stop [-d <device>]"; +static const char daemon_name[] = "hott_telemetry"; +static const char commandline_usage[] = "usage: hott_telemetry start|status|stop [-d <device>]"; - -/* A little console messaging experiment - console helper macro */ -#define FATAL_MSG(_msg) fprintf(stderr, "[%s] %s\n", daemon_name, _msg); exit(1); -#define ERROR_MSG(_msg) fprintf(stderr, "[%s] %s\n", daemon_name, _msg); -#define INFO_MSG(_msg) printf("[%s] %s\n", daemon_name, _msg); /** * Deamon management function. */ __EXPORT int hott_telemetry_main(int argc, char *argv[]); /** - * Mainloop of deamon. + * Mainloop of daemon. */ int hott_telemetry_thread_main(int argc, char *argv[]); -static int read_data(int uart, int *id); -static int send_data(int uart, uint8_t *buffer, int size); +static int recv_req_id(int uart, uint8_t *id); +static int send_data(int uart, uint8_t *buffer, size_t size); -static int open_uart(const char *device, struct termios *uart_config_original) +static int +open_uart(const char *device, struct termios *uart_config_original) { /* baud rate */ - int speed = B19200; - int uart; + static const speed_t speed = B19200; /* open uart */ - uart = open(device, O_RDWR | O_NOCTTY); + const int uart = open(device, O_RDWR | O_NOCTTY); if (uart < 0) { - char msg[80]; - sprintf(msg, "Error opening port: %s\n", device); - FATAL_MSG(msg); + err(1, "Error opening port: %s", device); } - - /* Try to set baud rate */ - struct termios uart_config; + + /* Back up the original uart configuration to restore it after exit */ int termios_state; - - /* Back up the original uart configuration to restore it after exit */ - char msg[80]; - if ((termios_state = tcgetattr(uart, uart_config_original)) < 0) { - sprintf(msg, "Error getting baudrate / termios config for %s: %d\n", device, termios_state); close(uart); - FATAL_MSG(msg); + err(1, "Error getting baudrate / termios config for %s: %d", device, termios_state); } /* Fill the struct for the new configuration */ + struct termios uart_config; tcgetattr(uart, &uart_config); /* Clear ONLCR flag (which appends a CR for every LF) */ @@ -117,16 +106,14 @@ static int open_uart(const char *device, struct termios *uart_config_original) /* Set baud rate */ if (cfsetispeed(&uart_config, speed) < 0 || cfsetospeed(&uart_config, speed) < 0) { - sprintf(msg, "Error setting baudrate / termios config for %s: %d (cfsetispeed, cfsetospeed)\n", - device, termios_state); close(uart); - FATAL_MSG(msg); + err(1, "Error setting baudrate / termios config for %s: %d (cfsetispeed, cfsetospeed)", + device, termios_state); } if ((termios_state = tcsetattr(uart, TCSANOW, &uart_config)) < 0) { - sprintf(msg, "Error setting baudrate / termios config for %s (tcsetattr)\n", device); close(uart); - FATAL_MSG(msg); + err(1, "Error setting baudrate / termios config for %s (tcsetattr)", device); } /* Activate single wire mode */ @@ -135,39 +122,41 @@ static int open_uart(const char *device, struct termios *uart_config_original) return uart; } -int read_data(int uart, int *id) +int +recv_req_id(int uart, uint8_t *id) { - const int timeout = 1000; + static const int timeout_ms = 1000; // TODO make it a define struct pollfd fds[] = { { .fd = uart, .events = POLLIN } }; - char mode; + uint8_t mode; - if (poll(fds, 1, timeout) > 0) { + if (poll(fds, 1, timeout_ms) > 0) { /* Get the mode: binary or text */ - read(uart, &mode, 1); - /* Read the device ID being polled */ - read(uart, id, 1); + read(uart, &mode, sizeof(mode)); /* if we have a binary mode request */ if (mode != BINARY_MODE_REQUEST_ID) { return ERROR; } + /* Read the device ID being polled */ + read(uart, id, sizeof(*id)); } else { - ERROR_MSG("UART timeout on TX/RX port"); + warnx("UART timeout on TX/RX port"); return ERROR; } return OK; } -int send_data(int uart, uint8_t *buffer, int size) +int +send_data(int uart, uint8_t *buffer, size_t size) { usleep(POST_READ_DELAY_IN_USECS); uint16_t checksum = 0; - for (int i = 0; i < size; i++) { + for (size_t i = 0; i < size; i++) { if (i == size - 1) { /* Set the checksum: the first uint8_t is taken as the checksum. */ buffer[i] = checksum & 0xff; @@ -176,7 +165,7 @@ int send_data(int uart, uint8_t *buffer, int size) checksum += buffer[i]; } - write(uart, &buffer[i], 1); + write(uart, &buffer[i], sizeof(buffer[i])); /* Sleep before sending the next byte. */ usleep(POST_WRITE_DELAY_IN_USECS); @@ -190,13 +179,14 @@ int send_data(int uart, uint8_t *buffer, int size) return OK; } -int hott_telemetry_thread_main(int argc, char *argv[]) +int +hott_telemetry_thread_main(int argc, char *argv[]) { - INFO_MSG("starting"); + warnx("starting"); thread_running = true; - char *device = "/dev/ttyS1"; /**< Default telemetry port: USART2 */ + const char *device = "/dev/ttyS1"; /**< Default telemetry port: USART2 */ /* read commandline arguments */ for (int i = 0; i < argc && argv[i]; i++) { @@ -206,45 +196,55 @@ int hott_telemetry_thread_main(int argc, char *argv[]) } else { thread_running = false; - ERROR_MSG("missing parameter to -d"); - ERROR_MSG(commandline_usage); - exit(1); + errx(1, "missing parameter to -d\n%s", commandline_usage); } } } /* enable UART, writes potentially an empty buffer, but multiplexing is disabled */ struct termios uart_config_original; - int uart = open_uart(device, &uart_config_original); + const int uart = open_uart(device, &uart_config_original); if (uart < 0) { - ERROR_MSG("Failed opening HoTT UART, exiting."); + errx(1, "Failed opening HoTT UART, exiting."); thread_running = false; - exit(ERROR); } messages_init(); uint8_t buffer[MESSAGE_BUFFER_SIZE]; - int size = 0; - int id = 0; + size_t size = 0; + uint8_t id = 0; + bool connected = true; while (!thread_should_exit) { - if (read_data(uart, &id) == OK) { + if (recv_req_id(uart, &id) == OK) { + if (!connected) { + connected = true; + warnx("OK"); + } + switch (id) { - case ELECTRIC_AIR_MODULE: + case EAM_SENSOR_ID: build_eam_response(buffer, &size); break; + case GPS_SENSOR_ID: + build_gps_response(buffer, &size); + break; + default: continue; // Not a module we support. } send_data(uart, buffer, size); + } else { + connected = false; + warnx("syncing"); } } - INFO_MSG("exiting"); + warnx("exiting"); close(uart); @@ -256,23 +256,22 @@ int hott_telemetry_thread_main(int argc, char *argv[]) /** * Process command line arguments and tart the daemon. */ -int hott_telemetry_main(int argc, char *argv[]) +int +hott_telemetry_main(int argc, char *argv[]) { if (argc < 1) { - ERROR_MSG("missing command"); - ERROR_MSG(commandline_usage); - exit(1); + errx(1, "missing command\n%s", commandline_usage); } if (!strcmp(argv[1], "start")) { if (thread_running) { - INFO_MSG("deamon already running"); + warnx("deamon already running"); exit(0); } thread_should_exit = false; - deamon_task = task_spawn("hott_telemetry", + deamon_task = task_spawn(daemon_name, SCHED_DEFAULT, SCHED_PRIORITY_MAX - 40, 2048, @@ -288,19 +287,14 @@ int hott_telemetry_main(int argc, char *argv[]) if (!strcmp(argv[1], "status")) { if (thread_running) { - INFO_MSG("daemon is running"); + warnx("daemon is running"); } else { - INFO_MSG("daemon not started"); + warnx("daemon not started"); } exit(0); } - ERROR_MSG("unrecognized command"); - ERROR_MSG(commandline_usage); - exit(1); + errx(1, "unrecognized command\n%s", commandline_usage); } - - - diff --git a/src/drivers/hott_telemetry/messages.c b/src/drivers/hott_telemetry/messages.c index f0f32d244..369070f8c 100644 --- a/src/drivers/hott_telemetry/messages.c +++ b/src/drivers/hott_telemetry/messages.c @@ -1,7 +1,7 @@ /**************************************************************************** * - * Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. - * Author: Simon Wilks <sjwilks@gmail.com> + * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * Author: @author Simon Wilks <sjwilks@gmail.com> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -34,30 +34,44 @@ /** * @file messages.c - * @author Simon Wilks <sjwilks@gmail.com> + * */ #include "messages.h" +#include <math.h> +#include <stdio.h> #include <string.h> -#include <systemlib/systemlib.h> +#include <systemlib/geo/geo.h> #include <unistd.h> -#include <uORB/topics/airspeed.h> #include <uORB/topics/battery_status.h> +#include <uORB/topics/home_position.h> #include <uORB/topics/sensor_combined.h> +#include <uORB/topics/vehicle_gps_position.h> + +/* The board is very roughly 5 deg warmer than the surrounding air */ +#define BOARD_TEMP_OFFSET_DEG 5 -static int airspeed_sub = -1; static int battery_sub = -1; +static int gps_sub = -1; +static int home_sub = -1; static int sensor_sub = -1; -void messages_init(void) +static bool home_position_set = false; +static double home_lat = 0.0d; +static double home_lon = 0.0d; + +void +messages_init(void) { battery_sub = orb_subscribe(ORB_ID(battery_status)); + gps_sub = orb_subscribe(ORB_ID(vehicle_gps_position)); + home_sub = orb_subscribe(ORB_ID(home_position)); sensor_sub = orb_subscribe(ORB_ID(sensor_combined)); - airspeed_sub = orb_subscribe(ORB_ID(airspeed)); } -void build_eam_response(uint8_t *buffer, int *size) +void +build_eam_response(uint8_t *buffer, size_t *size) { /* get a local copy of the current sensor values */ struct sensor_combined_s raw; @@ -74,26 +88,144 @@ void build_eam_response(uint8_t *buffer, int *size) memset(&msg, 0, *size); msg.start = START_BYTE; - msg.eam_sensor_id = ELECTRIC_AIR_MODULE; - msg.sensor_id = EAM_SENSOR_ID; + msg.eam_sensor_id = EAM_SENSOR_ID; + msg.sensor_id = EAM_SENSOR_TEXT_ID; + msg.temperature1 = (uint8_t)(raw.baro_temp_celcius + 20); - msg.temperature2 = TEMP_ZERO_CELSIUS; + msg.temperature2 = msg.temperature1 - BOARD_TEMP_OFFSET_DEG; + msg.main_voltage_L = (uint8_t)(battery.voltage_v * 10); uint16_t alt = (uint16_t)(raw.baro_alt_meter + 500); msg.altitude_L = (uint8_t)alt & 0xff; msg.altitude_H = (uint8_t)(alt >> 8) & 0xff; + msg.stop = STOP_BYTE; + memcpy(buffer, &msg, *size); +} + +void +build_gps_response(uint8_t *buffer, size_t *size) +{ /* get a local copy of the current sensor values */ - struct airspeed_s airspeed; - memset(&airspeed, 0, sizeof(airspeed)); - orb_copy(ORB_ID(airspeed), airspeed_sub, &airspeed); + struct sensor_combined_s raw; + memset(&raw, 0, sizeof(raw)); + orb_copy(ORB_ID(sensor_combined), sensor_sub, &raw); - uint16_t speed = (uint16_t)(airspeed.indicated_airspeed_m_s * 3.6); - msg.speed_L = (uint8_t)speed & 0xff; - msg.speed_H = (uint8_t)(speed >> 8) & 0xff; + /* get a local copy of the battery data */ + struct vehicle_gps_position_s gps; + memset(&gps, 0, sizeof(gps)); + orb_copy(ORB_ID(vehicle_gps_position), gps_sub, &gps); - msg.stop = STOP_BYTE; + struct gps_module_msg msg = { 0 }; + *size = sizeof(msg); + memset(&msg, 0, *size); + + msg.start = START_BYTE; + msg.sensor_id = GPS_SENSOR_ID; + msg.sensor_text_id = GPS_SENSOR_TEXT_ID; + + msg.gps_num_sat = gps.satellites_visible; + + /* The GPS fix type: 0 = none, 2 = 2D, 3 = 3D */ + msg.gps_fix_char = (uint8_t)(gps.fix_type + 48); + msg.gps_fix = (uint8_t)(gps.fix_type + 48); + /* No point collecting more data if we don't have a 3D fix yet */ + if (gps.fix_type > 2) { + /* Current flight direction */ + msg.flight_direction = (uint8_t)(gps.cog_rad * M_RAD_TO_DEG_F); + + /* GPS speed */ + uint16_t speed = (uint16_t)(gps.vel_m_s * 3.6); + msg.gps_speed_L = (uint8_t)speed & 0xff; + msg.gps_speed_H = (uint8_t)(speed >> 8) & 0xff; + + /* Get latitude in degrees, minutes and seconds */ + double lat = ((double)(gps.lat))*1e-7d; + + /* Set the N or S specifier */ + msg.latitude_ns = 0; + if (lat < 0) { + msg.latitude_ns = 1; + lat = abs(lat); + } + + int deg; + int min; + int sec; + convert_to_degrees_minutes_seconds(lat, °, &min, &sec); + + uint16_t lat_min = (uint16_t)(deg * 100 + min); + msg.latitude_min_L = (uint8_t)lat_min & 0xff; + msg.latitude_min_H = (uint8_t)(lat_min >> 8) & 0xff; + uint16_t lat_sec = (uint16_t)(sec); + msg.latitude_sec_L = (uint8_t)lat_sec & 0xff; + msg.latitude_sec_H = (uint8_t)(lat_sec >> 8) & 0xff; + + /* Get longitude in degrees, minutes and seconds */ + double lon = ((double)(gps.lon))*1e-7d; + + /* Set the E or W specifier */ + msg.longitude_ew = 0; + if (lon < 0) { + msg.longitude_ew = 1; + lon = abs(lon); + } + + convert_to_degrees_minutes_seconds(lon, °, &min, &sec); + + uint16_t lon_min = (uint16_t)(deg * 100 + min); + msg.longitude_min_L = (uint8_t)lon_min & 0xff; + msg.longitude_min_H = (uint8_t)(lon_min >> 8) & 0xff; + uint16_t lon_sec = (uint16_t)(sec); + msg.longitude_sec_L = (uint8_t)lon_sec & 0xff; + msg.longitude_sec_H = (uint8_t)(lon_sec >> 8) & 0xff; + + /* Altitude */ + uint16_t alt = (uint16_t)(gps.alt*1e-3 + 500.0f); + msg.altitude_L = (uint8_t)alt & 0xff; + msg.altitude_H = (uint8_t)(alt >> 8) & 0xff; + + /* Get any (and probably only ever one) home_sub postion report */ + bool updated; + orb_check(home_sub, &updated); + if (updated) { + /* get a local copy of the home position data */ + struct home_position_s home; + memset(&home, 0, sizeof(home)); + orb_copy(ORB_ID(home_position), home_sub, &home); + + home_lat = ((double)(home.lat))*1e-7d; + home_lon = ((double)(home.lon))*1e-7d; + home_position_set = true; + } + + /* Distance from home */ + if (home_position_set) { + uint16_t dist = (uint16_t)get_distance_to_next_waypoint(home_lat, home_lon, lat, lon); + + msg.distance_L = (uint8_t)dist & 0xff; + msg.distance_H = (uint8_t)(dist >> 8) & 0xff; + + /* Direction back to home */ + uint16_t bearing = (uint16_t)(get_bearing_to_next_waypoint(home_lat, home_lon, lat, lon) * M_RAD_TO_DEG_F); + msg.home_direction = (uint8_t)bearing >> 1; + } + } + + msg.stop = STOP_BYTE; memcpy(buffer, &msg, *size); -}
\ No newline at end of file +} + +void +convert_to_degrees_minutes_seconds(double val, int *deg, int *min, int *sec) +{ + *deg = (int)val; + + double delta = val - *deg; + const double min_d = delta * 60.0d; + *min = (int)min_d; + delta = min_d - *min; + *sec = (int)(delta * 10000.0d); +} diff --git a/src/drivers/hott_telemetry/messages.h b/src/drivers/hott_telemetry/messages.h index dd38075fa..e6d5cc723 100644 --- a/src/drivers/hott_telemetry/messages.h +++ b/src/drivers/hott_telemetry/messages.h @@ -44,11 +44,6 @@ #include <stdlib.h> -/* The buffer size used to store messages. This must be at least as big as the number of - * fields in the largest message struct. - */ -#define MESSAGE_BUFFER_SIZE 50 - /* The HoTT receiver demands a minimum 5ms period of silence after delivering its request. * Note that the value specified here is lower than 5000 (5ms) as time is lost constucting * the message after the read which takes some milliseconds. @@ -66,18 +61,18 @@ #define TEMP_ZERO_CELSIUS 0x14 /* Electric Air Module (EAM) constants. */ -#define ELECTRIC_AIR_MODULE 0x8e -#define EAM_SENSOR_ID 0xe0 +#define EAM_SENSOR_ID 0x8e +#define EAM_SENSOR_TEXT_ID 0xe0 /* The Electric Air Module message. */ struct eam_module_msg { - uint8_t start; /**< Start byte */ - uint8_t eam_sensor_id; /**< EAM sensor ID */ + uint8_t start; /**< Start byte */ + uint8_t eam_sensor_id; /**< EAM sensor */ uint8_t warning; - uint8_t sensor_id; /**< Sensor ID, why different? */ + uint8_t sensor_id; /**< Sensor ID, why different? */ uint8_t alarm_inverse1; uint8_t alarm_inverse2; - uint8_t cell1_L; /**< Lipo cell voltages. Not supported. */ + uint8_t cell1_L; /**< Lipo cell voltages. Not supported. */ uint8_t cell2_L; uint8_t cell3_L; uint8_t cell4_L; @@ -95,30 +90,107 @@ struct eam_module_msg { uint8_t batt1_voltage_H; uint8_t batt2_voltage_L; /**< Battery 2 voltage, lower 8-bits in steps of 0.02V */ uint8_t batt2_voltage_H; - uint8_t temperature1; /**< Temperature sensor 1. 20 = 0 degrees */ + uint8_t temperature1; /**< Temperature sensor 1. 20 = 0 degrees */ uint8_t temperature2; - uint8_t altitude_L; /**< Attitude (meters) lower 8-bits. 500 = 0 meters */ + uint8_t altitude_L; /**< Attitude (meters) lower 8-bits. 500 = 0 meters */ uint8_t altitude_H; - uint8_t current_L; /**< Current (mAh) lower 8-bits in steps of 0.1V */ + uint8_t current_L; /**< Current (mAh) lower 8-bits in steps of 0.1V */ uint8_t current_H; - uint8_t main_voltage_L; /**< Main power voltage lower 8-bits in steps of 0.1V */ + uint8_t main_voltage_L; /**< Main power voltage lower 8-bits in steps of 0.1V */ uint8_t main_voltage_H; - uint8_t battery_capacity_L; /**< Used battery capacity in steps of 10mAh */ + uint8_t battery_capacity_L; /**< Used battery capacity in steps of 10mAh */ uint8_t battery_capacity_H; - uint8_t climbrate_L; /**< Climb rate in 0.01m/s. 0m/s = 30000 */ + uint8_t climbrate_L; /**< Climb rate in 0.01m/s. 0m/s = 30000 */ uint8_t climbrate_H; - uint8_t climbrate_3s; /**< Climb rate in m/3sec. 0m/3sec = 120 */ - uint8_t rpm_L; /**< RPM Lower 8-bits In steps of 10 U/min */ + uint8_t climbrate_3s; /**< Climb rate in m/3sec. 0m/3sec = 120 */ + uint8_t rpm_L; /**< RPM Lower 8-bits In steps of 10 U/min */ uint8_t rpm_H; - uint8_t electric_min; /**< Flight time in minutes. */ - uint8_t electric_sec; /**< Flight time in seconds. */ - uint8_t speed_L; /**< Airspeed in km/h in steps of 1 km/h */ + uint8_t electric_min; /**< Flight time in minutes. */ + uint8_t electric_sec; /**< Flight time in seconds. */ + uint8_t speed_L; /**< Airspeed in km/h in steps of 1 km/h */ uint8_t speed_H; - uint8_t stop; /**< Stop byte */ - uint8_t checksum; /**< Lower 8-bits of all bytes summed. */ + uint8_t stop; /**< Stop byte */ + uint8_t checksum; /**< Lower 8-bits of all bytes summed. */ }; +/** + * The maximum buffer size required to store a HoTT message. + */ +#define MESSAGE_BUFFER_SIZE sizeof(union { \ + struct eam_module_msg eam; \ +}) + +/* GPS sensor constants. */ +#define GPS_SENSOR_ID 0x8A +#define GPS_SENSOR_TEXT_ID 0xA0 + +/** + * The GPS sensor message + * Struct based on: https://code.google.com/p/diy-hott-gps/downloads + */ +struct gps_module_msg { + uint8_t start; /**< Start byte */ + uint8_t sensor_id; /**< GPS sensor ID*/ + uint8_t warning; /**< Byte 3: 0…= warning beeps */ + uint8_t sensor_text_id; /**< GPS Sensor text mode ID */ + uint8_t alarm_inverse1; /**< Byte 5: 01 inverse status */ + uint8_t alarm_inverse2; /**< Byte 6: 00 inverse status status 1 = no GPS Signal */ + uint8_t flight_direction; /**< Byte 7: 119 = Flightdir./dir. 1 = 2°; 0° (North), 9 0° (East), 180° (South), 270° (West) */ + uint8_t gps_speed_L; /**< Byte 8: 8 = /GPS speed low byte 8km/h */ + uint8_t gps_speed_H; /**< Byte 9: 0 = /GPS speed high byte */ + + uint8_t latitude_ns; /**< Byte 10: 000 = N = 48°39’988 */ + uint8_t latitude_min_L; /**< Byte 11: 231 0xE7 = 0x12E7 = 4839 */ + uint8_t latitude_min_H; /**< Byte 12: 018 18 = 0x12 */ + uint8_t latitude_sec_L; /**< Byte 13: 171 220 = 0xDC = 0x03DC =0988 */ + uint8_t latitude_sec_H; /**< Byte 14: 016 3 = 0x03 */ + + uint8_t longitude_ew; /**< Byte 15: 000 = E= 9° 25’9360 */ + uint8_t longitude_min_L; /**< Byte 16: 150 157 = 0x9D = 0x039D = 0925 */ + uint8_t longitude_min_H; /**< Byte 17: 003 3 = 0x03 */ + uint8_t longitude_sec_L; /**< Byte 18: 056 144 = 0x90 0x2490 = 9360*/ + uint8_t longitude_sec_H; /**< Byte 19: 004 36 = 0x24 */ + + uint8_t distance_L; /**< Byte 20: 027 123 = /distance low byte 6 = 6 m */ + uint8_t distance_H; /**< Byte 21: 036 35 = /distance high byte */ + uint8_t altitude_L; /**< Byte 22: 243 244 = /Altitude low byte 500 = 0m */ + uint8_t altitude_H; /**< Byte 23: 001 1 = /Altitude high byte */ + uint8_t resolution_L; /**< Byte 24: 48 = Low Byte m/s resolution 0.01m 48 = 30000 = 0.00m/s (1=0.01m/s) */ + uint8_t resolution_H; /**< Byte 25: 117 = High Byte m/s resolution 0.01m */ + uint8_t unknown1; /**< Byte 26: 120 = 0m/3s */ + uint8_t gps_num_sat; /**< Byte 27: GPS.Satellites (number of satelites) (1 byte) */ + uint8_t gps_fix_char; /**< Byte 28: GPS.FixChar. (GPS fix character. display, if DGPS, 2D oder 3D) (1 byte) */ + uint8_t home_direction; /**< Byte 29: HomeDirection (direction from starting point to Model position) (1 byte) */ + uint8_t angle_x_direction; /**< Byte 30: angle x-direction (1 byte) */ + uint8_t angle_y_direction; /**< Byte 31: angle y-direction (1 byte) */ + uint8_t angle_z_direction; /**< Byte 32: angle z-direction (1 byte) */ + uint8_t gyro_x_L; /**< Byte 33: gyro x low byte (2 bytes) */ + uint8_t gyro_x_H; /**< Byte 34: gyro x high byte */ + uint8_t gyro_y_L; /**< Byte 35: gyro y low byte (2 bytes) */ + uint8_t gyro_y_H; /**< Byte 36: gyro y high byte */ + uint8_t gyro_z_L; /**< Byte 37: gyro z low byte (2 bytes) */ + uint8_t gyro_z_H; /**< Byte 38: gyro z high byte */ + uint8_t vibration; /**< Byte 39: vibration (1 bytes) */ + uint8_t ascii4; /**< Byte 40: 00 ASCII Free Character [4] */ + uint8_t ascii5; /**< Byte 41: 00 ASCII Free Character [5] */ + uint8_t gps_fix; /**< Byte 42: 00 ASCII Free Character [6], we use it for GPS FIX */ + uint8_t version; /**< Byte 43: 00 version number */ + uint8_t stop; /**< Byte 44: 0x7D Ende byte */ + uint8_t checksum; /**< Byte 45: Parity Byte */ +}; + +/** + * The maximum buffer size required to store a HoTT message. + */ +#define GPS_MESSAGE_BUFFER_SIZE sizeof(union { \ + struct gps_module_msg gps; \ +}) + void messages_init(void); -void build_eam_response(uint8_t *buffer, int *size); +void build_eam_response(uint8_t *buffer, size_t *size); +void build_gps_response(uint8_t *buffer, size_t *size); +float _get_distance_to_next_waypoint(double lat_now, double lon_now, double lat_next, double lon_next); +void convert_to_degrees_minutes_seconds(double lat, int *deg, int *min, int *sec); + #endif /* MESSAGES_H_ */ diff --git a/src/drivers/px4io/px4io.cpp b/src/drivers/px4io/px4io.cpp index 8b2fae12b..19163cebe 100644 --- a/src/drivers/px4io/px4io.cpp +++ b/src/drivers/px4io/px4io.cpp @@ -106,7 +106,7 @@ public: * @param rate The rate in Hz actuator outpus are sent to IO. * Min 10 Hz, max 400 Hz */ - int set_update_rate(int rate); + int set_update_rate(int rate); /** * Set the battery current scaling and bias @@ -114,7 +114,15 @@ public: * @param amp_per_volt * @param amp_bias */ - void set_battery_current_scaling(float amp_per_volt, float amp_bias); + void set_battery_current_scaling(float amp_per_volt, float amp_bias); + + /** + * Push failsafe values to IO. + * + * @param vals Failsafe control inputs: in us PPM (900 for zero, 1500 for centered, 2100 for full) + * @param len Number of channels, could up to 8 + */ + int set_failsafe_values(const uint16_t *vals, unsigned len); /** * Print the current status of IO @@ -326,11 +334,11 @@ PX4IO::PX4IO() : _to_actuators_effective(0), _to_outputs(0), _to_battery(0), + _primary_pwm_device(false), _battery_amp_per_volt(90.0f/5.0f), // this matches the 3DR current sensor _battery_amp_bias(0), _battery_mamphour_total(0), - _battery_last_timestamp(0), - _primary_pwm_device(false) + _battery_last_timestamp(0) { /* we need this potentially before it could be set in task_main */ g_dev = this; @@ -690,6 +698,19 @@ PX4IO::io_set_control_state() } int +PX4IO::set_failsafe_values(const uint16_t *vals, unsigned len) +{ + uint16_t regs[_max_actuators]; + + if (len > _max_actuators) + /* fail with error */ + return E2BIG; + + /* copy values to registers in IO */ + return io_reg_set(PX4IO_PAGE_FAILSAFE_PWM, 0, vals, len); +} + +int PX4IO::io_set_arming_state() { actuator_armed_s armed; ///< system armed state @@ -1250,7 +1271,7 @@ PX4IO::print_status() printf("%u bytes free\n", io_reg_get(PX4IO_PAGE_STATUS, PX4IO_P_STATUS_FREEMEM)); uint16_t flags = io_reg_get(PX4IO_PAGE_STATUS, PX4IO_P_STATUS_FLAGS); - printf("status 0x%04x%s%s%s%s%s%s%s%s%s%s%s\n", + printf("status 0x%04x%s%s%s%s%s%s%s%s%s%s%s%s\n", flags, ((flags & PX4IO_P_STATUS_FLAGS_ARMED) ? " ARMED" : ""), ((flags & PX4IO_P_STATUS_FLAGS_OVERRIDE) ? " OVERRIDE" : ""), @@ -1262,7 +1283,8 @@ PX4IO::print_status() ((flags & PX4IO_P_STATUS_FLAGS_RAW_PWM) ? " RAW_PPM" : ""), ((flags & PX4IO_P_STATUS_FLAGS_MIXER_OK) ? " MIXER_OK" : " MIXER_FAIL"), ((flags & PX4IO_P_STATUS_FLAGS_ARM_SYNC) ? " ARM_SYNC" : " ARM_NO_SYNC"), - ((flags & PX4IO_P_STATUS_FLAGS_INIT_OK) ? " INIT_OK" : " INIT_FAIL")); + ((flags & PX4IO_P_STATUS_FLAGS_INIT_OK) ? " INIT_OK" : " INIT_FAIL"), + ((flags & PX4IO_P_STATUS_FLAGS_FAILSAFE) ? " FAILSAFE" : "")); uint16_t alarms = io_reg_get(PX4IO_PAGE_STATUS, PX4IO_P_STATUS_ALARMS); printf("alarms 0x%04x%s%s%s%s%s%s%s\n", alarms, @@ -1280,7 +1302,7 @@ PX4IO::print_status() io_reg_get(PX4IO_PAGE_STATUS, PX4IO_P_STATUS_VBATT), io_reg_get(PX4IO_PAGE_STATUS, PX4IO_P_STATUS_IBATT), io_reg_get(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_VBATT_SCALE)); - printf("amp_per_volt %.3f amp_offset %.3f mAhDischarged %.3f\n", + printf("amp_per_volt %.3f amp_offset %.3f mAh discharged %.3f\n", (double)_battery_amp_per_volt, (double)_battery_amp_bias, (double)_battery_mamphour_total); @@ -1474,7 +1496,7 @@ PX4IO::ioctl(file *filep, int cmd, unsigned long arg) case MIXERIOCLOADBUF: { const char *buf = (const char *)arg; - ret = mixer_send(buf, strnlen(buf, 1024)); + ret = mixer_send(buf, strnlen(buf, 2048)); break; } @@ -1615,6 +1637,13 @@ test(void) if (ioctl(fd, PWM_SERVO_ARM, 0)) err(1, "failed to arm servos"); + /* Open console directly to grab CTRL-C signal */ + int console = open("/dev/console", O_NONBLOCK | O_RDONLY | O_NOCTTY); + if (!console) + err(1, "failed opening console"); + + warnx("Press CTRL-C or 'c' to abort."); + for (;;) { /* sweep all servos between 1000..2000 */ @@ -1649,6 +1678,16 @@ test(void) if (value != servos[i]) errx(1, "servo %d readback error, got %u expected %u", i, value, servos[i]); } + + /* Check if user wants to quit */ + char c; + if (read(console, &c, 1) == 1) { + if (c == 0x03 || c == 0x63) { + warnx("User abort\n"); + close(console); + exit(0); + } + } } } @@ -1718,6 +1757,41 @@ px4io_main(int argc, char *argv[]) exit(0); } + if (!strcmp(argv[1], "failsafe")) { + + if (argc < 3) { + errx(1, "failsafe command needs at least one channel value (ppm)"); + } + + if (g_dev != nullptr) { + + /* set values for first 8 channels, fill unassigned channels with 1500. */ + uint16_t failsafe[8]; + + for (int i = 0; i < sizeof(failsafe) / sizeof(failsafe[0]); i++) + { + /* set channel to commanline argument or to 900 for non-provided channels */ + if (argc > i + 2) { + failsafe[i] = atoi(argv[i+2]); + if (failsafe[i] < 800 || failsafe[i] > 2200) { + errx(1, "value out of range of 800 < value < 2200. Aborting."); + } + } else { + /* a zero value will result in stopping to output any pulse */ + failsafe[i] = 0; + } + } + + int ret = g_dev->set_failsafe_values(failsafe, sizeof(failsafe) / sizeof(failsafe[0])); + + if (ret != OK) + errx(ret, "failed setting failsafe values"); + } else { + errx(1, "not loaded"); + } + exit(0); + } + if (!strcmp(argv[1], "recovery")) { if (g_dev != nullptr) { @@ -1845,5 +1919,5 @@ px4io_main(int argc, char *argv[]) monitor(); out: - errx(1, "need a command, try 'start', 'stop', 'status', 'test', 'monitor', 'debug', 'recovery', 'limit', 'current' or 'update'"); + errx(1, "need a command, try 'start', 'stop', 'status', 'test', 'monitor', 'debug', 'recovery', 'limit', 'current', 'failsafe' or 'update'"); } diff --git a/src/examples/px4_daemon_app/px4_daemon_app.c b/src/examples/px4_daemon_app/px4_daemon_app.c index a5d847777..c568aaadc 100644 --- a/src/examples/px4_daemon_app/px4_daemon_app.c +++ b/src/examples/px4_daemon_app/px4_daemon_app.c @@ -1,7 +1,6 @@ /**************************************************************************** * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * Author: @author Example User <mail@example.com> + * Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -33,27 +32,33 @@ ****************************************************************************/ /** - * @file px4_deamon_app.c - * Deamon application example for PX4 autopilot + * @file px4_daemon_app.c + * daemon application example for PX4 autopilot + * + * @author Example User <mail@example.com> */ #include <nuttx/config.h> +#include <nuttx/sched.h> #include <unistd.h> #include <stdio.h> -static bool thread_should_exit = false; /**< Deamon exit flag */ -static bool thread_running = false; /**< Deamon status flag */ -static int deamon_task; /**< Handle of deamon task / thread */ +#include <systemlib/systemlib.h> +#include <systemlib/err.h> + +static bool thread_should_exit = false; /**< daemon exit flag */ +static bool thread_running = false; /**< daemon status flag */ +static int daemon_task; /**< Handle of daemon task / thread */ /** - * Deamon management function. + * daemon management function. */ -__EXPORT int px4_deamon_app_main(int argc, char *argv[]); +__EXPORT int px4_daemon_app_main(int argc, char *argv[]); /** - * Mainloop of deamon. + * Mainloop of daemon. */ -int px4_deamon_thread_main(int argc, char *argv[]); +int px4_daemon_thread_main(int argc, char *argv[]); /** * Print the correct usage. @@ -64,20 +69,19 @@ static void usage(const char *reason) { if (reason) - fprintf(stderr, "%s\n", reason); - fprintf(stderr, "usage: deamon {start|stop|status} [-p <additional params>]\n\n"); - exit(1); + warnx("%s\n", reason); + errx(1, "usage: daemon {start|stop|status} [-p <additional params>]\n\n"); } /** - * The deamon app only briefly exists to start + * The daemon app only briefly exists to start * the background job. The stack size assigned in the * Makefile does only apply to this management task. * * The actual stack size should be set in the call * to task_create(). */ -int px4_deamon_app_main(int argc, char *argv[]) +int px4_daemon_app_main(int argc, char *argv[]) { if (argc < 1) usage("missing command"); @@ -85,17 +89,17 @@ int px4_deamon_app_main(int argc, char *argv[]) if (!strcmp(argv[1], "start")) { if (thread_running) { - printf("deamon already running\n"); + warnx("daemon already running\n"); /* this is not an error */ exit(0); } thread_should_exit = false; - deamon_task = task_spawn("deamon", + daemon_task = task_spawn("daemon", SCHED_DEFAULT, SCHED_PRIORITY_DEFAULT, 4096, - px4_deamon_thread_main, + px4_daemon_thread_main, (argv) ? (const char **)&argv[2] : (const char **)NULL); exit(0); } @@ -107,9 +111,9 @@ int px4_deamon_app_main(int argc, char *argv[]) if (!strcmp(argv[1], "status")) { if (thread_running) { - printf("\tdeamon app is running\n"); + warnx("\trunning\n"); } else { - printf("\tdeamon app not started\n"); + warnx("\tnot started\n"); } exit(0); } @@ -118,18 +122,18 @@ int px4_deamon_app_main(int argc, char *argv[]) exit(1); } -int px4_deamon_thread_main(int argc, char *argv[]) { +int px4_daemon_thread_main(int argc, char *argv[]) { - printf("[deamon] starting\n"); + warnx("[daemon] starting\n"); thread_running = true; while (!thread_should_exit) { - printf("Hello Deamon!\n"); + warnx("Hello daemon!\n"); sleep(10); } - printf("[deamon] exiting.\n"); + warnx("[daemon] exiting.\n"); thread_running = false; diff --git a/src/modules/att_pos_estimator_ekf/KalmanNav.cpp b/src/modules/att_pos_estimator_ekf/KalmanNav.cpp index 4ef150da1..c3836bdfa 100644 --- a/src/modules/att_pos_estimator_ekf/KalmanNav.cpp +++ b/src/modules/att_pos_estimator_ekf/KalmanNav.cpp @@ -683,7 +683,8 @@ int KalmanNav::correctPos() // fault detetcion float beta = y.dot(S.inverse() * y); - if (beta > _faultPos.get()) { + static int counter = 0; + if (beta > _faultPos.get() && (counter % 10 == 0)) { printf("fault in gps: beta = %8.4f\n", (double)beta); printf("Y/N: vN: %8.4f, vE: %8.4f, lat: %8.4f, lon: %8.4f, alt: %8.4f\n", double(y(0) / sqrtf(RPos(0, 0))), @@ -693,6 +694,7 @@ int KalmanNav::correctPos() double(y(4) / sqrtf(RPos(4, 4))), double(y(5) / sqrtf(RPos(5, 5)))); } + counter++; return ret_ok; } diff --git a/src/modules/att_pos_estimator_ekf/kalman_main.cpp b/src/modules/att_pos_estimator_ekf/kalman_main.cpp index aebe3d1fe..10592ec7c 100644 --- a/src/modules/att_pos_estimator_ekf/kalman_main.cpp +++ b/src/modules/att_pos_estimator_ekf/kalman_main.cpp @@ -44,6 +44,7 @@ #include <string.h> #include <systemlib/systemlib.h> #include <systemlib/param/param.h> +#include <systemlib/err.h> #include <drivers/drv_hrt.h> #include <math.h> #include "KalmanNav.hpp" @@ -73,7 +74,7 @@ usage(const char *reason) if (reason) fprintf(stderr, "%s\n", reason); - fprintf(stderr, "usage: kalman_demo {start|stop|status} [-p <additional params>]\n\n"); + warnx("usage: att_pos_estimator_ekf {start|stop|status} [-p <additional params>]"); exit(1); } @@ -94,13 +95,13 @@ int att_pos_estimator_ekf_main(int argc, char *argv[]) if (!strcmp(argv[1], "start")) { if (thread_running) { - printf("kalman_demo already running\n"); + warnx("already running"); /* this is not an error */ exit(0); } thread_should_exit = false; - deamon_task = task_spawn("kalman_demo", + deamon_task = task_spawn("att_pos_estimator_ekf", SCHED_DEFAULT, SCHED_PRIORITY_MAX - 5, 4096, @@ -116,10 +117,10 @@ int att_pos_estimator_ekf_main(int argc, char *argv[]) if (!strcmp(argv[1], "status")) { if (thread_running) { - printf("\tkalman_demo app is running\n"); + warnx("is running\n"); } else { - printf("\tkalman_demo app not started\n"); + warnx("not started\n"); } exit(0); @@ -132,7 +133,7 @@ int att_pos_estimator_ekf_main(int argc, char *argv[]) int kalman_demo_thread_main(int argc, char *argv[]) { - printf("[kalman_demo] starting\n"); + warnx("starting\n"); using namespace math; @@ -144,7 +145,7 @@ int kalman_demo_thread_main(int argc, char *argv[]) nav.update(); } - printf("[kalman_demo] exiting.\n"); + printf("exiting.\n"); thread_running = false; diff --git a/src/modules/attitude_estimator_so3_comp/README b/src/modules/attitude_estimator_so3_comp/README new file mode 100644 index 000000000..79c50a531 --- /dev/null +++ b/src/modules/attitude_estimator_so3_comp/README @@ -0,0 +1,5 @@ +Synopsis + + nsh> attitude_estimator_so3_comp start -d /dev/ttyS1 -b 115200 + +Option -d is for debugging packet. See code for detailed packet structure. diff --git a/src/modules/attitude_estimator_so3_comp/attitude_estimator_so3_comp_main.cpp b/src/modules/attitude_estimator_so3_comp/attitude_estimator_so3_comp_main.cpp new file mode 100755 index 000000000..3cbc62ea1 --- /dev/null +++ b/src/modules/attitude_estimator_so3_comp/attitude_estimator_so3_comp_main.cpp @@ -0,0 +1,833 @@ +/* + * Author: Hyon Lim <limhyon@gmail.com, hyonlim@snu.ac.kr> + * + * @file attitude_estimator_so3_comp_main.c + * + * Implementation of nonlinear complementary filters on the SO(3). + * This code performs attitude estimation by using accelerometer, gyroscopes and magnetometer. + * Result is provided as quaternion, 1-2-3 Euler angle and rotation matrix. + * + * Theory of nonlinear complementary filters on the SO(3) is based on [1]. + * Quaternion realization of [1] is based on [2]. + * Optmized quaternion update code is based on Sebastian Madgwick's implementation. + * + * References + * [1] Mahony, R.; Hamel, T.; Pflimlin, Jean-Michel, "Nonlinear Complementary Filters on the Special Orthogonal Group," Automatic Control, IEEE Transactions on , vol.53, no.5, pp.1203,1218, June 2008 + * [2] Euston, M.; Coote, P.; Mahony, R.; Jonghyuk Kim; Hamel, T., "A complementary filter for attitude estimation of a fixed-wing UAV," Intelligent Robots and Systems, 2008. IROS 2008. IEEE/RSJ International Conference on , vol., no., pp.340,345, 22-26 Sept. 2008 + */ + +#include <nuttx/config.h> +#include <unistd.h> +#include <stdlib.h> +#include <string.h> +#include <stdio.h> +#include <stdbool.h> +#include <poll.h> +#include <fcntl.h> +#include <float.h> +#include <nuttx/sched.h> +#include <sys/prctl.h> +#include <termios.h> +#include <errno.h> +#include <limits.h> +#include <math.h> +#include <uORB/uORB.h> +#include <uORB/topics/debug_key_value.h> +#include <uORB/topics/sensor_combined.h> +#include <uORB/topics/vehicle_attitude.h> +#include <uORB/topics/vehicle_status.h> +#include <uORB/topics/parameter_update.h> +#include <drivers/drv_hrt.h> + +#include <systemlib/systemlib.h> +#include <systemlib/perf_counter.h> +#include <systemlib/err.h> + +#ifdef __cplusplus +extern "C" { +#endif +#include "attitude_estimator_so3_comp_params.h" +#ifdef __cplusplus +} +#endif + +extern "C" __EXPORT int attitude_estimator_so3_comp_main(int argc, char *argv[]); + +static bool thread_should_exit = false; /**< Deamon exit flag */ +static bool thread_running = false; /**< Deamon status flag */ +static int attitude_estimator_so3_comp_task; /**< Handle of deamon task / thread */ +static float q0 = 1.0f, q1 = 0.0f, q2 = 0.0f, q3 = 0.0f; /** quaternion of sensor frame relative to auxiliary frame */ +static float dq0 = 0.0f, dq1 = 0.0f, dq2 = 0.0f, dq3 = 0.0f; /** quaternion of sensor frame relative to auxiliary frame */ +static float gyro_bias[3] = {0.0f, 0.0f, 0.0f}; /** bias estimation */ +static bool bFilterInit = false; + +//! Auxiliary variables to reduce number of repeated operations +static float q0q0, q0q1, q0q2, q0q3; +static float q1q1, q1q2, q1q3; +static float q2q2, q2q3; +static float q3q3; + +//! Serial packet related +static int uart; +static int baudrate; + +/** + * Mainloop of attitude_estimator_so3_comp. + */ +int attitude_estimator_so3_comp_thread_main(int argc, char *argv[]); + +/** + * Print the correct usage. + */ +static void usage(const char *reason); + +static void +usage(const char *reason) +{ + if (reason) + fprintf(stderr, "%s\n", reason); + + fprintf(stderr, "usage: attitude_estimator_so3_comp {start|stop|status} [-d <devicename>] [-b <baud rate>]\n" + "-d and -b options are for separate visualization with raw data (quaternion packet) transfer\n" + "ex) attitude_estimator_so3_comp start -d /dev/ttyS1 -b 115200\n"); + exit(1); +} + +/** + * The attitude_estimator_so3_comp app only briefly exists to start + * the background job. The stack size assigned in the + * Makefile does only apply to this management task. + * + * The actual stack size should be set in the call + * to task_create(). + */ +int attitude_estimator_so3_comp_main(int argc, char *argv[]) +{ + if (argc < 1) + usage("missing command"); + + + + if (!strcmp(argv[1], "start")) { + + if (thread_running) { + printf("attitude_estimator_so3_comp already running\n"); + /* this is not an error */ + exit(0); + } + + thread_should_exit = false; + attitude_estimator_so3_comp_task = task_spawn("attitude_estimator_so3_comp", + SCHED_DEFAULT, + SCHED_PRIORITY_MAX - 5, + 12400, + attitude_estimator_so3_comp_thread_main, + (const char **)argv); + exit(0); + } + + if (!strcmp(argv[1], "stop")) { + thread_should_exit = true; + + while(thread_running){ + usleep(200000); + printf("."); + } + printf("terminated."); + exit(0); + } + + if (!strcmp(argv[1], "status")) { + if (thread_running) { + printf("\tattitude_estimator_so3_comp app is running\n"); + + } else { + printf("\tattitude_estimator_so3_comp app not started\n"); + } + + exit(0); + } + + usage("unrecognized command"); + exit(1); +} + +//--------------------------------------------------------------------------------------------------- +// Fast inverse square-root +// See: http://en.wikipedia.org/wiki/Fast_inverse_square_root +float invSqrt(float number) { + volatile long i; + volatile float x, y; + volatile const float f = 1.5F; + + x = number * 0.5F; + y = number; + i = * (( long * ) &y); + i = 0x5f375a86 - ( i >> 1 ); + y = * (( float * ) &i); + y = y * ( f - ( x * y * y ) ); + return y; +} + +//! Using accelerometer, sense the gravity vector. +//! Using magnetometer, sense yaw. +void NonlinearSO3AHRSinit(float ax, float ay, float az, float mx, float my, float mz) +{ + float initialRoll, initialPitch; + float cosRoll, sinRoll, cosPitch, sinPitch; + float magX, magY; + float initialHdg, cosHeading, sinHeading; + + initialRoll = atan2(-ay, -az); + initialPitch = atan2(ax, -az); + + cosRoll = cosf(initialRoll); + sinRoll = sinf(initialRoll); + cosPitch = cosf(initialPitch); + sinPitch = sinf(initialPitch); + + magX = mx * cosPitch + my * sinRoll * sinPitch + mz * cosRoll * sinPitch; + + magY = my * cosRoll - mz * sinRoll; + + initialHdg = atan2f(-magY, magX); + + cosRoll = cosf(initialRoll * 0.5f); + sinRoll = sinf(initialRoll * 0.5f); + + cosPitch = cosf(initialPitch * 0.5f); + sinPitch = sinf(initialPitch * 0.5f); + + cosHeading = cosf(initialHdg * 0.5f); + sinHeading = sinf(initialHdg * 0.5f); + + q0 = cosRoll * cosPitch * cosHeading + sinRoll * sinPitch * sinHeading; + q1 = sinRoll * cosPitch * cosHeading - cosRoll * sinPitch * sinHeading; + q2 = cosRoll * sinPitch * cosHeading + sinRoll * cosPitch * sinHeading; + q3 = cosRoll * cosPitch * sinHeading - sinRoll * sinPitch * cosHeading; + + // auxillary variables to reduce number of repeated operations, for 1st pass + q0q0 = q0 * q0; + q0q1 = q0 * q1; + q0q2 = q0 * q2; + q0q3 = q0 * q3; + q1q1 = q1 * q1; + q1q2 = q1 * q2; + q1q3 = q1 * q3; + q2q2 = q2 * q2; + q2q3 = q2 * q3; + q3q3 = q3 * q3; +} + +void NonlinearSO3AHRSupdate(float gx, float gy, float gz, float ax, float ay, float az, float mx, float my, float mz, float twoKp, float twoKi, float dt) { + float recipNorm; + float halfex = 0.0f, halfey = 0.0f, halfez = 0.0f; + + //! Make filter converge to initial solution faster + //! This function assumes you are in static position. + //! WARNING : in case air reboot, this can cause problem. But this is very + //! unlikely happen. + if(bFilterInit == false) + { + NonlinearSO3AHRSinit(ax,ay,az,mx,my,mz); + bFilterInit = true; + } + + //! If magnetometer measurement is available, use it. + if((mx == 0.0f) && (my == 0.0f) && (mz == 0.0f)) { + float hx, hy, hz, bx, bz; + float halfwx, halfwy, halfwz; + + // Normalise magnetometer measurement + // Will sqrt work better? PX4 system is powerful enough? + recipNorm = invSqrt(mx * mx + my * my + mz * mz); + mx *= recipNorm; + my *= recipNorm; + mz *= recipNorm; + + // Reference direction of Earth's magnetic field + hx = 2.0f * (mx * (0.5f - q2q2 - q3q3) + my * (q1q2 - q0q3) + mz * (q1q3 + q0q2)); + hy = 2.0f * (mx * (q1q2 + q0q3) + my * (0.5f - q1q1 - q3q3) + mz * (q2q3 - q0q1)); + hz = 2 * mx * (q1q3 - q0q2) + 2 * my * (q2q3 + q0q1) + 2 * mz * (0.5 - q1q1 - q2q2); + bx = sqrt(hx * hx + hy * hy); + bz = hz; + + // Estimated direction of magnetic field + halfwx = bx * (0.5f - q2q2 - q3q3) + bz * (q1q3 - q0q2); + halfwy = bx * (q1q2 - q0q3) + bz * (q0q1 + q2q3); + halfwz = bx * (q0q2 + q1q3) + bz * (0.5f - q1q1 - q2q2); + + // Error is sum of cross product between estimated direction and measured direction of field vectors + halfex += (my * halfwz - mz * halfwy); + halfey += (mz * halfwx - mx * halfwz); + halfez += (mx * halfwy - my * halfwx); + } + + // Compute feedback only if accelerometer measurement valid (avoids NaN in accelerometer normalisation) + if(!((ax == 0.0f) && (ay == 0.0f) && (az == 0.0f))) { + float halfvx, halfvy, halfvz; + + // Normalise accelerometer measurement + recipNorm = invSqrt(ax * ax + ay * ay + az * az); + ax *= recipNorm; + ay *= recipNorm; + az *= recipNorm; + + // Estimated direction of gravity and magnetic field + halfvx = q1q3 - q0q2; + halfvy = q0q1 + q2q3; + halfvz = q0q0 - 0.5f + q3q3; + + // Error is sum of cross product between estimated direction and measured direction of field vectors + halfex += ay * halfvz - az * halfvy; + halfey += az * halfvx - ax * halfvz; + halfez += ax * halfvy - ay * halfvx; + } + + // Apply feedback only when valid data has been gathered from the accelerometer or magnetometer + if(halfex != 0.0f && halfey != 0.0f && halfez != 0.0f) { + // Compute and apply integral feedback if enabled + if(twoKi > 0.0f) { + gyro_bias[0] += twoKi * halfex * dt; // integral error scaled by Ki + gyro_bias[1] += twoKi * halfey * dt; + gyro_bias[2] += twoKi * halfez * dt; + gx += gyro_bias[0]; // apply integral feedback + gy += gyro_bias[1]; + gz += gyro_bias[2]; + } + else { + gyro_bias[0] = 0.0f; // prevent integral windup + gyro_bias[1] = 0.0f; + gyro_bias[2] = 0.0f; + } + + // Apply proportional feedback + gx += twoKp * halfex; + gy += twoKp * halfey; + gz += twoKp * halfez; + } + + //! Integrate rate of change of quaternion +#if 0 + gx *= (0.5f * dt); // pre-multiply common factors + gy *= (0.5f * dt); + gz *= (0.5f * dt); +#endif + + // Time derivative of quaternion. q_dot = 0.5*q\otimes omega. + //! q_k = q_{k-1} + dt*\dot{q} + //! \dot{q} = 0.5*q \otimes P(\omega) + dq0 = 0.5f*(-q1 * gx - q2 * gy - q3 * gz); + dq1 = 0.5f*(q0 * gx + q2 * gz - q3 * gy); + dq2 = 0.5f*(q0 * gy - q1 * gz + q3 * gx); + dq3 = 0.5f*(q0 * gz + q1 * gy - q2 * gx); + + q0 += dt*dq0; + q1 += dt*dq1; + q2 += dt*dq2; + q3 += dt*dq3; + + // Normalise quaternion + recipNorm = invSqrt(q0 * q0 + q1 * q1 + q2 * q2 + q3 * q3); + q0 *= recipNorm; + q1 *= recipNorm; + q2 *= recipNorm; + q3 *= recipNorm; + + // Auxiliary variables to avoid repeated arithmetic + q0q0 = q0 * q0; + q0q1 = q0 * q1; + q0q2 = q0 * q2; + q0q3 = q0 * q3; + q1q1 = q1 * q1; + q1q2 = q1 * q2; + q1q3 = q1 * q3; + q2q2 = q2 * q2; + q2q3 = q2 * q3; + q3q3 = q3 * q3; +} + +void send_uart_byte(char c) +{ + write(uart,&c,1); +} + +void send_uart_bytes(uint8_t *data, int length) +{ + write(uart,data,(size_t)(sizeof(uint8_t)*length)); +} + +void send_uart_float(float f) { + uint8_t * b = (uint8_t *) &f; + + //! Assume float is 4-bytes + for(int i=0; i<4; i++) { + + uint8_t b1 = (b[i] >> 4) & 0x0f; + uint8_t b2 = (b[i] & 0x0f); + + uint8_t c1 = (b1 < 10) ? ('0' + b1) : 'A' + b1 - 10; + uint8_t c2 = (b2 < 10) ? ('0' + b2) : 'A' + b2 - 10; + + send_uart_bytes(&c1,1); + send_uart_bytes(&c2,1); + } +} + +void send_uart_float_arr(float *arr, int length) +{ + for(int i=0;i<length;++i) + { + send_uart_float(arr[i]); + send_uart_byte(','); + } +} + +int open_uart(int baud, const char *uart_name, struct termios *uart_config_original, bool *is_usb) +{ + int speed; + + switch (baud) { + case 0: speed = B0; break; + case 50: speed = B50; break; + case 75: speed = B75; break; + case 110: speed = B110; break; + case 134: speed = B134; break; + case 150: speed = B150; break; + case 200: speed = B200; break; + case 300: speed = B300; break; + case 600: speed = B600; break; + case 1200: speed = B1200; break; + case 1800: speed = B1800; break; + case 2400: speed = B2400; break; + case 4800: speed = B4800; break; + case 9600: speed = B9600; break; + case 19200: speed = B19200; break; + case 38400: speed = B38400; break; + case 57600: speed = B57600; break; + case 115200: speed = B115200; break; + case 230400: speed = B230400; break; + case 460800: speed = B460800; break; + case 921600: speed = B921600; break; + default: + printf("ERROR: Unsupported baudrate: %d\n\tsupported examples:\n\n\t9600\n19200\n38400\n57600\n115200\n230400\n460800\n921600\n\n", baud); + return -EINVAL; + } + + printf("[so3_comp_filt] UART is %s, baudrate is %d\n", uart_name, baud); + uart = open(uart_name, O_RDWR | O_NOCTTY); + + /* Try to set baud rate */ + struct termios uart_config; + int termios_state; + *is_usb = false; + + /* make some wild guesses including that USB serial is indicated by either /dev/ttyACM0 or /dev/console */ + if (strcmp(uart_name, "/dev/ttyACM0") != OK && strcmp(uart_name, "/dev/console") != OK) { + /* Back up the original uart configuration to restore it after exit */ + if ((termios_state = tcgetattr(uart, uart_config_original)) < 0) { + printf("ERROR getting baudrate / termios config for %s: %d\n", uart_name, termios_state); + close(uart); + return -1; + } + + /* Fill the struct for the new configuration */ + tcgetattr(uart, &uart_config); + + /* Clear ONLCR flag (which appends a CR for every LF) */ + uart_config.c_oflag &= ~ONLCR; + + /* Set baud rate */ + if (cfsetispeed(&uart_config, speed) < 0 || cfsetospeed(&uart_config, speed) < 0) { + printf("ERROR setting baudrate / termios config for %s: %d (cfsetispeed, cfsetospeed)\n", uart_name, termios_state); + close(uart); + return -1; + } + + + if ((termios_state = tcsetattr(uart, TCSANOW, &uart_config)) < 0) { + printf("ERROR setting baudrate / termios config for %s (tcsetattr)\n", uart_name); + close(uart); + return -1; + } + + } else { + *is_usb = true; + } + + return uart; +} + +/* + * [Rot_matrix,x_aposteriori,P_aposteriori] = attitudeKalmanfilter(dt,z_k,x_aposteriori_k,P_aposteriori_k,knownConst) + */ + +/* + * EKF Attitude Estimator main function. + * + * Estimates the attitude recursively once started. + * + * @param argc number of commandline arguments (plus command name) + * @param argv strings containing the arguments + */ +int attitude_estimator_so3_comp_thread_main(int argc, char *argv[]) +{ + +const unsigned int loop_interval_alarm = 6500; // loop interval in microseconds + + //! Serial debug related + int ch; + struct termios uart_config_original; + bool usb_uart; + bool debug_mode = false; + char *device_name = "/dev/ttyS2"; + baudrate = 115200; + + //! Time constant + float dt = 0.005f; + + /* output euler angles */ + float euler[3] = {0.0f, 0.0f, 0.0f}; + + float Rot_matrix[9] = {1.f, 0, 0, + 0, 1.f, 0, + 0, 0, 1.f + }; /**< init: identity matrix */ + + float acc[3] = {0.0f, 0.0f, 0.0f}; + float gyro[3] = {0.0f, 0.0f, 0.0f}; + float mag[3] = {0.0f, 0.0f, 0.0f}; + + /* work around some stupidity in task_create's argv handling */ + argc -= 2; + argv += 2; + + //! -d <device_name>, default : /dev/ttyS2 + //! -b <baud_rate>, default : 115200 + while ((ch = getopt(argc,argv,"d:b:")) != EOF){ + switch(ch){ + case 'b': + baudrate = strtoul(optarg, NULL, 10); + if(baudrate == 0) + printf("invalid baud rate '%s'",optarg); + break; + case 'd': + device_name = optarg; + debug_mode = true; + break; + default: + usage("invalid argument"); + } + } + + if(debug_mode){ + printf("Opening debugging port for 3D visualization\n"); + uart = open_uart(baudrate, device_name, &uart_config_original, &usb_uart); + if (uart < 0) + printf("could not open %s", device_name); + else + printf("Open port success\n"); + } + + // print text + printf("Nonlinear SO3 Attitude Estimator initialized..\n\n"); + fflush(stdout); + + int overloadcounter = 19; + + /* store start time to guard against too slow update rates */ + uint64_t last_run = hrt_absolute_time(); + + struct sensor_combined_s raw; + memset(&raw, 0, sizeof(raw)); + + //! Initialize attitude vehicle uORB message. + struct vehicle_attitude_s att; + memset(&att, 0, sizeof(att)); + + struct vehicle_status_s state; + memset(&state, 0, sizeof(state)); + + uint64_t last_data = 0; + uint64_t last_measurement = 0; + + /* subscribe to raw data */ + int sub_raw = orb_subscribe(ORB_ID(sensor_combined)); + /* rate-limit raw data updates to 200Hz */ + orb_set_interval(sub_raw, 4); + + /* subscribe to param changes */ + int sub_params = orb_subscribe(ORB_ID(parameter_update)); + + /* subscribe to system state*/ + int sub_state = orb_subscribe(ORB_ID(vehicle_status)); + + /* advertise attitude */ + orb_advert_t pub_att = orb_advertise(ORB_ID(vehicle_attitude), &att); + + int loopcounter = 0; + int printcounter = 0; + + thread_running = true; + + /* advertise debug value */ + // struct debug_key_value_s dbg = { .key = "", .value = 0.0f }; + // orb_advert_t pub_dbg = -1; + + float sensor_update_hz[3] = {0.0f, 0.0f, 0.0f}; + // XXX write this out to perf regs + + /* keep track of sensor updates */ + uint32_t sensor_last_count[3] = {0, 0, 0}; + uint64_t sensor_last_timestamp[3] = {0, 0, 0}; + + struct attitude_estimator_so3_comp_params so3_comp_params; + struct attitude_estimator_so3_comp_param_handles so3_comp_param_handles; + + /* initialize parameter handles */ + parameters_init(&so3_comp_param_handles); + + uint64_t start_time = hrt_absolute_time(); + bool initialized = false; + + float gyro_offsets[3] = { 0.0f, 0.0f, 0.0f }; + unsigned offset_count = 0; + + /* register the perf counter */ + perf_counter_t so3_comp_loop_perf = perf_alloc(PC_ELAPSED, "attitude_estimator_so3_comp"); + + /* Main loop*/ + while (!thread_should_exit) { + + struct pollfd fds[2]; + fds[0].fd = sub_raw; + fds[0].events = POLLIN; + fds[1].fd = sub_params; + fds[1].events = POLLIN; + int ret = poll(fds, 2, 1000); + + if (ret < 0) { + /* XXX this is seriously bad - should be an emergency */ + } else if (ret == 0) { + /* check if we're in HIL - not getting sensor data is fine then */ + orb_copy(ORB_ID(vehicle_status), sub_state, &state); + + if (!state.flag_hil_enabled) { + fprintf(stderr, + "[att so3_comp] WARNING: Not getting sensors - sensor app running?\n"); + } + + } else { + + /* only update parameters if they changed */ + if (fds[1].revents & POLLIN) { + /* read from param to clear updated flag */ + struct parameter_update_s update; + orb_copy(ORB_ID(parameter_update), sub_params, &update); + + /* update parameters */ + parameters_update(&so3_comp_param_handles, &so3_comp_params); + } + + /* only run filter if sensor values changed */ + if (fds[0].revents & POLLIN) { + + /* get latest measurements */ + orb_copy(ORB_ID(sensor_combined), sub_raw, &raw); + + if (!initialized) { + + gyro_offsets[0] += raw.gyro_rad_s[0]; + gyro_offsets[1] += raw.gyro_rad_s[1]; + gyro_offsets[2] += raw.gyro_rad_s[2]; + offset_count++; + + if (hrt_absolute_time() - start_time > 3000000LL) { + initialized = true; + gyro_offsets[0] /= offset_count; + gyro_offsets[1] /= offset_count; + gyro_offsets[2] /= offset_count; + } + + } else { + + perf_begin(so3_comp_loop_perf); + + /* Calculate data time difference in seconds */ + dt = (raw.timestamp - last_measurement) / 1000000.0f; + last_measurement = raw.timestamp; + uint8_t update_vect[3] = {0, 0, 0}; + + /* Fill in gyro measurements */ + if (sensor_last_count[0] != raw.gyro_counter) { + update_vect[0] = 1; + sensor_last_count[0] = raw.gyro_counter; + sensor_update_hz[0] = 1e6f / (raw.timestamp - sensor_last_timestamp[0]); + sensor_last_timestamp[0] = raw.timestamp; + } + + gyro[0] = raw.gyro_rad_s[0] - gyro_offsets[0]; + gyro[1] = raw.gyro_rad_s[1] - gyro_offsets[1]; + gyro[2] = raw.gyro_rad_s[2] - gyro_offsets[2]; + + /* update accelerometer measurements */ + if (sensor_last_count[1] != raw.accelerometer_counter) { + update_vect[1] = 1; + sensor_last_count[1] = raw.accelerometer_counter; + sensor_update_hz[1] = 1e6f / (raw.timestamp - sensor_last_timestamp[1]); + sensor_last_timestamp[1] = raw.timestamp; + } + + acc[0] = raw.accelerometer_m_s2[0]; + acc[1] = raw.accelerometer_m_s2[1]; + acc[2] = raw.accelerometer_m_s2[2]; + + /* update magnetometer measurements */ + if (sensor_last_count[2] != raw.magnetometer_counter) { + update_vect[2] = 1; + sensor_last_count[2] = raw.magnetometer_counter; + sensor_update_hz[2] = 1e6f / (raw.timestamp - sensor_last_timestamp[2]); + sensor_last_timestamp[2] = raw.timestamp; + } + + mag[0] = raw.magnetometer_ga[0]; + mag[1] = raw.magnetometer_ga[1]; + mag[2] = raw.magnetometer_ga[2]; + + uint64_t now = hrt_absolute_time(); + unsigned int time_elapsed = now - last_run; + last_run = now; + + if (time_elapsed > loop_interval_alarm) { + //TODO: add warning, cpu overload here + // if (overloadcounter == 20) { + // printf("CPU OVERLOAD DETECTED IN ATTITUDE ESTIMATOR EKF (%lu > %lu)\n", time_elapsed, loop_interval_alarm); + // overloadcounter = 0; + // } + + overloadcounter++; + } + + static bool const_initialized = false; + + /* initialize with good values once we have a reasonable dt estimate */ + if (!const_initialized && dt < 0.05f && dt > 0.005f) { + dt = 0.005f; + parameters_update(&so3_comp_param_handles, &so3_comp_params); + const_initialized = true; + } + + /* do not execute the filter if not initialized */ + if (!const_initialized) { + continue; + } + + uint64_t timing_start = hrt_absolute_time(); + + // NOTE : Accelerometer is reversed. + // Because proper mount of PX4 will give you a reversed accelerometer readings. + NonlinearSO3AHRSupdate(gyro[0],gyro[1],gyro[2],-acc[0],-acc[1],-acc[2],mag[0],mag[1],mag[2],so3_comp_params.Kp,so3_comp_params.Ki, dt); + + // Convert q->R. + Rot_matrix[0] = q0q0 + q1q1 - q2q2 - q3q3;// 11 + Rot_matrix[1] = 2.0 * (q1*q2 + q0*q3); // 12 + Rot_matrix[2] = 2.0 * (q1*q3 - q0*q2); // 13 + Rot_matrix[3] = 2.0 * (q1*q2 - q0*q3); // 21 + Rot_matrix[4] = q0q0 - q1q1 + q2q2 - q3q3;// 22 + Rot_matrix[5] = 2.0 * (q2*q3 + q0*q1); // 23 + Rot_matrix[6] = 2.0 * (q1*q3 + q0*q2); // 31 + Rot_matrix[7] = 2.0 * (q2*q3 - q0*q1); // 32 + Rot_matrix[8] = q0q0 - q1q1 - q2q2 + q3q3;// 33 + + //1-2-3 Representation. + //Equation (290) + //Representing Attitude: Euler Angles, Unit Quaternions, and Rotation Vectors, James Diebel. + // Existing PX4 EKF code was generated by MATLAB which uses coloum major order matrix. + euler[0] = atan2f(Rot_matrix[5], Rot_matrix[8]); //! Roll + euler[1] = -asinf(Rot_matrix[2]); //! Pitch + euler[2] = atan2f(Rot_matrix[1],Rot_matrix[0]); //! Yaw + + /* swap values for next iteration, check for fatal inputs */ + if (isfinite(euler[0]) && isfinite(euler[1]) && isfinite(euler[2])) { + /* Do something */ + } else { + /* due to inputs or numerical failure the output is invalid, skip it */ + continue; + } + + if (last_data > 0 && raw.timestamp - last_data > 12000) printf("[attitude estimator so3_comp] sensor data missed! (%llu)\n", raw.timestamp - last_data); + + last_data = raw.timestamp; + + /* send out */ + att.timestamp = raw.timestamp; + + // XXX Apply the same transformation to the rotation matrix + att.roll = euler[0] - so3_comp_params.roll_off; + att.pitch = euler[1] - so3_comp_params.pitch_off; + att.yaw = euler[2] - so3_comp_params.yaw_off; + + //! Euler angle rate. But it needs to be investigated again. + /* + att.rollspeed = 2.0f*(-q1*dq0 + q0*dq1 - q3*dq2 + q2*dq3); + att.pitchspeed = 2.0f*(-q2*dq0 + q3*dq1 + q0*dq2 - q1*dq3); + att.yawspeed = 2.0f*(-q3*dq0 -q2*dq1 + q1*dq2 + q0*dq3); + */ + att.rollspeed = gyro[0]; + att.pitchspeed = gyro[1]; + att.yawspeed = gyro[2]; + + att.rollacc = 0; + att.pitchacc = 0; + att.yawacc = 0; + + //! Quaternion + att.q[0] = q0; + att.q[1] = q1; + att.q[2] = q2; + att.q[3] = q3; + att.q_valid = true; + + /* TODO: Bias estimation required */ + memcpy(&att.rate_offsets, &(gyro_bias), sizeof(att.rate_offsets)); + + /* copy rotation matrix */ + memcpy(&att.R, Rot_matrix, sizeof(Rot_matrix)); + att.R_valid = true; + + if (isfinite(att.roll) && isfinite(att.pitch) && isfinite(att.yaw)) { + // Broadcast + orb_publish(ORB_ID(vehicle_attitude), pub_att, &att); + + } else { + warnx("NaN in roll/pitch/yaw estimate!"); + } + + perf_end(so3_comp_loop_perf); + + //! This will print out debug packet to visualization software + if(debug_mode) + { + float quat[4]; + quat[0] = q0; + quat[1] = q1; + quat[2] = q2; + quat[3] = q3; + send_uart_float_arr(quat,4); + send_uart_byte('\n'); + } + } + } + } + + loopcounter++; + }// while + + thread_running = false; + + /* Reset the UART flags to original state */ + if (!usb_uart) + tcsetattr(uart, TCSANOW, &uart_config_original); + + return 0; +} diff --git a/src/modules/attitude_estimator_so3_comp/attitude_estimator_so3_comp_params.c b/src/modules/attitude_estimator_so3_comp/attitude_estimator_so3_comp_params.c new file mode 100755 index 000000000..f962515df --- /dev/null +++ b/src/modules/attitude_estimator_so3_comp/attitude_estimator_so3_comp_params.c @@ -0,0 +1,63 @@ +/* + * Author: Hyon Lim <limhyon@gmail.com, hyonlim@snu.ac.kr> + * + * @file attitude_estimator_so3_comp_params.c + * + * Implementation of nonlinear complementary filters on the SO(3). + * This code performs attitude estimation by using accelerometer, gyroscopes and magnetometer. + * Result is provided as quaternion, 1-2-3 Euler angle and rotation matrix. + * + * Theory of nonlinear complementary filters on the SO(3) is based on [1]. + * Quaternion realization of [1] is based on [2]. + * Optmized quaternion update code is based on Sebastian Madgwick's implementation. + * + * References + * [1] Mahony, R.; Hamel, T.; Pflimlin, Jean-Michel, "Nonlinear Complementary Filters on the Special Orthogonal Group," Automatic Control, IEEE Transactions on , vol.53, no.5, pp.1203,1218, June 2008 + * [2] Euston, M.; Coote, P.; Mahony, R.; Jonghyuk Kim; Hamel, T., "A complementary filter for attitude estimation of a fixed-wing UAV," Intelligent Robots and Systems, 2008. IROS 2008. IEEE/RSJ International Conference on , vol., no., pp.340,345, 22-26 Sept. 2008 + */ + +#include "attitude_estimator_so3_comp_params.h" + +/* This is filter gain for nonlinear SO3 complementary filter */ +/* NOTE : How to tune the gain? First of all, stick with this default gain. And let the quad in stable place. + Log the steady state reponse of filter. If it is too slow, increase SO3_COMP_KP. + If you are flying from ground to high altitude in short amount of time, please increase SO3_COMP_KI which + will compensate gyro bias which depends on temperature and vibration of your vehicle */ +PARAM_DEFINE_FLOAT(SO3_COMP_KP, 1.0f); //! This parameter will give you about 15 seconds convergence time. + //! You can set this gain higher if you want more fast response. + //! But note that higher gain will give you also higher overshoot. +PARAM_DEFINE_FLOAT(SO3_COMP_KI, 0.05f); //! This gain will incorporate slow time-varying bias (e.g., temperature change) + //! This gain is depend on your vehicle status. + +/* offsets in roll, pitch and yaw of sensor plane and body */ +PARAM_DEFINE_FLOAT(ATT_ROLL_OFFS, 0.0f); +PARAM_DEFINE_FLOAT(ATT_PITCH_OFFS, 0.0f); +PARAM_DEFINE_FLOAT(ATT_YAW_OFFS, 0.0f); + +int parameters_init(struct attitude_estimator_so3_comp_param_handles *h) +{ + /* Filter gain parameters */ + h->Kp = param_find("SO3_COMP_KP"); + h->Ki = param_find("SO3_COMP_KI"); + + /* Attitude offset (WARNING: Do not change if you do not know what exactly this variable wil lchange) */ + h->roll_off = param_find("ATT_ROLL_OFFS"); + h->pitch_off = param_find("ATT_PITCH_OFFS"); + h->yaw_off = param_find("ATT_YAW_OFFS"); + + return OK; +} + +int parameters_update(const struct attitude_estimator_so3_comp_param_handles *h, struct attitude_estimator_so3_comp_params *p) +{ + /* Update filter gain */ + param_get(h->Kp, &(p->Kp)); + param_get(h->Ki, &(p->Ki)); + + /* Update attitude offset */ + param_get(h->roll_off, &(p->roll_off)); + param_get(h->pitch_off, &(p->pitch_off)); + param_get(h->yaw_off, &(p->yaw_off)); + + return OK; +} diff --git a/src/modules/attitude_estimator_so3_comp/attitude_estimator_so3_comp_params.h b/src/modules/attitude_estimator_so3_comp/attitude_estimator_so3_comp_params.h new file mode 100755 index 000000000..f00695630 --- /dev/null +++ b/src/modules/attitude_estimator_so3_comp/attitude_estimator_so3_comp_params.h @@ -0,0 +1,44 @@ +/* + * Author: Hyon Lim <limhyon@gmail.com, hyonlim@snu.ac.kr> + * + * @file attitude_estimator_so3_comp_params.h + * + * Implementation of nonlinear complementary filters on the SO(3). + * This code performs attitude estimation by using accelerometer, gyroscopes and magnetometer. + * Result is provided as quaternion, 1-2-3 Euler angle and rotation matrix. + * + * Theory of nonlinear complementary filters on the SO(3) is based on [1]. + * Quaternion realization of [1] is based on [2]. + * Optmized quaternion update code is based on Sebastian Madgwick's implementation. + * + * References + * [1] Mahony, R.; Hamel, T.; Pflimlin, Jean-Michel, "Nonlinear Complementary Filters on the Special Orthogonal Group," Automatic Control, IEEE Transactions on , vol.53, no.5, pp.1203,1218, June 2008 + * [2] Euston, M.; Coote, P.; Mahony, R.; Jonghyuk Kim; Hamel, T., "A complementary filter for attitude estimation of a fixed-wing UAV," Intelligent Robots and Systems, 2008. IROS 2008. IEEE/RSJ International Conference on , vol., no., pp.340,345, 22-26 Sept. 2008 + */ + +#include <systemlib/param/param.h> + +struct attitude_estimator_so3_comp_params { + float Kp; + float Ki; + float roll_off; + float pitch_off; + float yaw_off; +}; + +struct attitude_estimator_so3_comp_param_handles { + param_t Kp, Ki; + param_t roll_off, pitch_off, yaw_off; +}; + +/** + * Initialize all parameter handles and values + * + */ +int parameters_init(struct attitude_estimator_so3_comp_param_handles *h); + +/** + * Update all parameters + * + */ +int parameters_update(const struct attitude_estimator_so3_comp_param_handles *h, struct attitude_estimator_so3_comp_params *p); diff --git a/src/modules/attitude_estimator_so3_comp/module.mk b/src/modules/attitude_estimator_so3_comp/module.mk new file mode 100644 index 000000000..92f43d920 --- /dev/null +++ b/src/modules/attitude_estimator_so3_comp/module.mk @@ -0,0 +1,8 @@ +# +# Attitude estimator (Nonlinear SO3 complementary Filter) +# + +MODULE_COMMAND = attitude_estimator_so3_comp + +SRCS = attitude_estimator_so3_comp_main.cpp \ + attitude_estimator_so3_comp_params.c diff --git a/src/modules/fixedwing_backside/fixedwing_backside_main.cpp b/src/modules/fixedwing_backside/fixedwing_backside_main.cpp index e21990c92..c3d57a85a 100644 --- a/src/modules/fixedwing_backside/fixedwing_backside_main.cpp +++ b/src/modules/fixedwing_backside/fixedwing_backside_main.cpp @@ -47,6 +47,7 @@ #include <systemlib/systemlib.h> #include <controllib/fixedwing.hpp> #include <systemlib/param/param.h> +#include <systemlib/err.h> #include <drivers/drv_hrt.h> #include <math.h> @@ -80,7 +81,7 @@ usage(const char *reason) if (reason) fprintf(stderr, "%s\n", reason); - fprintf(stderr, "usage: control_demo {start|stop|status} [-p <additional params>]\n\n"); + fprintf(stderr, "usage: fixedwing_backside {start|stop|status} [-p <additional params>]\n\n"); exit(1); } @@ -101,13 +102,13 @@ int fixedwing_backside_main(int argc, char *argv[]) if (!strcmp(argv[1], "start")) { if (thread_running) { - printf("control_demo already running\n"); + warnx("already running"); /* this is not an error */ exit(0); } thread_should_exit = false; - deamon_task = task_spawn("control_demo", + deamon_task = task_spawn("fixedwing_backside", SCHED_DEFAULT, SCHED_PRIORITY_MAX - 10, 5120, @@ -128,10 +129,10 @@ int fixedwing_backside_main(int argc, char *argv[]) if (!strcmp(argv[1], "status")) { if (thread_running) { - printf("\tcontrol_demo app is running\n"); + warnx("is running"); } else { - printf("\tcontrol_demo app not started\n"); + warnx("not started"); } exit(0); @@ -144,7 +145,7 @@ int fixedwing_backside_main(int argc, char *argv[]) int control_demo_thread_main(int argc, char *argv[]) { - printf("[control_Demo] starting\n"); + warnx("starting"); using namespace control; @@ -156,7 +157,7 @@ int control_demo_thread_main(int argc, char *argv[]) autopilot.update(); } - printf("[control_demo] exiting.\n"); + warnx("exiting."); thread_running = false; @@ -165,6 +166,6 @@ int control_demo_thread_main(int argc, char *argv[]) void test() { - printf("beginning control lib test\n"); + warnx("beginning control lib test"); control::basicBlocksTest(); } diff --git a/src/modules/gpio_led/gpio_led.c b/src/modules/gpio_led/gpio_led.c index a80bf9cb8..43cbe74c7 100644 --- a/src/modules/gpio_led/gpio_led.c +++ b/src/modules/gpio_led/gpio_led.c @@ -48,6 +48,7 @@ #include <nuttx/wqueue.h> #include <nuttx/clock.h> #include <systemlib/systemlib.h> +#include <systemlib/err.h> #include <uORB/uORB.h> #include <uORB/topics/vehicle_status.h> #include <poll.h> @@ -64,6 +65,7 @@ struct gpio_led_s { }; static struct gpio_led_s gpio_led_data; +static bool gpio_led_started = false; __EXPORT int gpio_led_main(int argc, char *argv[]); @@ -75,31 +77,54 @@ int gpio_led_main(int argc, char *argv[]) { int pin = GPIO_EXT_1; - if (argc > 1) { - if (!strcmp(argv[1], "-p")) { - if (!strcmp(argv[2], "1")) { - pin = GPIO_EXT_1; + if (argc < 2) { + errx(1, "no argument provided. Try 'start' or 'stop' [-p 1/2]"); - } else if (!strcmp(argv[2], "2")) { - pin = GPIO_EXT_2; + } else { - } else { - printf("[gpio_led] Unsupported pin: %s\n", argv[2]); + /* START COMMAND HANDLING */ + if (!strcmp(argv[1], "start")) { + + if (argc > 2) { + if (!strcmp(argv[1], "-p")) { + if (!strcmp(argv[2], "1")) { + pin = GPIO_EXT_1; + + } else if (!strcmp(argv[2], "2")) { + pin = GPIO_EXT_2; + + } else { + warnx("[gpio_led] Unsupported pin: %s\n", argv[2]); + exit(1); + } + } + } + + memset(&gpio_led_data, 0, sizeof(gpio_led_data)); + gpio_led_data.pin = pin; + int ret = work_queue(LPWORK, &gpio_led_data.work, gpio_led_start, &gpio_led_data, 0); + + if (ret != 0) { + warnx("[gpio_led] Failed to queue work: %d\n", ret); exit(1); + + } else { + gpio_led_started = true; } - } - } - memset(&gpio_led_data, 0, sizeof(gpio_led_data)); - gpio_led_data.pin = pin; - int ret = work_queue(LPWORK, &gpio_led_data.work, gpio_led_start, &gpio_led_data, 0); + exit(0); - if (ret != 0) { - printf("[gpio_led] Failed to queue work: %d\n", ret); - exit(1); - } + /* STOP COMMAND HANDLING */ + + } else if (!strcmp(argv[1], "stop")) { + gpio_led_started = false; - exit(0); + /* INVALID COMMAND */ + + } else { + errx(1, "unrecognized command '%s', only supporting 'start' or 'stop'", argv[1]); + } + } } void gpio_led_start(FAR void *arg) @@ -110,7 +135,7 @@ void gpio_led_start(FAR void *arg) priv->gpio_fd = open(GPIO_DEVICE_PATH, 0); if (priv->gpio_fd < 0) { - printf("[gpio_led] GPIO: open fail\n"); + warnx("[gpio_led] GPIO: open fail\n"); return; } @@ -125,11 +150,11 @@ void gpio_led_start(FAR void *arg) int ret = work_queue(LPWORK, &priv->work, gpio_led_cycle, priv, 0); if (ret != 0) { - printf("[gpio_led] Failed to queue work: %d\n", ret); + warnx("[gpio_led] Failed to queue work: %d\n", ret); return; } - printf("[gpio_led] Started, using pin GPIO_EXT%i\n", priv->pin); + warnx("[gpio_led] Started, using pin GPIO_EXT%i\n", priv->pin); } void gpio_led_cycle(FAR void *arg) @@ -187,5 +212,6 @@ void gpio_led_cycle(FAR void *arg) priv->counter = 0; /* repeat cycle at 5 Hz*/ - work_queue(LPWORK, &priv->work, gpio_led_cycle, priv, USEC2TICK(200000)); + if (gpio_led_started) + work_queue(LPWORK, &priv->work, gpio_led_cycle, priv, USEC2TICK(200000)); } diff --git a/src/modules/px4iofirmware/mixer.cpp b/src/modules/px4iofirmware/mixer.cpp index 1234e2eea..a2193b526 100644 --- a/src/modules/px4iofirmware/mixer.cpp +++ b/src/modules/px4iofirmware/mixer.cpp @@ -85,6 +85,9 @@ static int mixer_callback(uintptr_t handle, static MixerGroup mixer_group(mixer_callback, 0); +/* Set the failsafe values of all mixed channels (based on zero throttle, controls centered) */ +static void mixer_set_failsafe(); + void mixer_tick(void) { @@ -102,13 +105,16 @@ mixer_tick(void) r_status_flags |= PX4IO_P_STATUS_FLAGS_FMU_OK; } + /* default to failsafe mixing */ source = MIX_FAILSAFE; /* * Decide which set of controls we're using. */ - if ((r_status_flags & PX4IO_P_STATUS_FLAGS_RAW_PWM) || - !(r_status_flags & PX4IO_P_STATUS_FLAGS_MIXER_OK)) { + + /* do not mix if mixer is invalid or if RAW_PWM mode is on and FMU is good */ + if ((r_status_flags & PX4IO_P_STATUS_FLAGS_RAW_PWM) && + !(r_status_flags & PX4IO_P_STATUS_FLAGS_MIXER_OK)) { /* don't actually mix anything - we already have raw PWM values or not a valid mixer. */ @@ -117,6 +123,7 @@ mixer_tick(void) } else { if (!(r_status_flags & PX4IO_P_STATUS_FLAGS_OVERRIDE) && + (r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_OK) && (r_status_flags & PX4IO_P_STATUS_FLAGS_MIXER_OK)) { /* mix from FMU controls */ @@ -133,14 +140,28 @@ mixer_tick(void) } /* + * Set failsafe status flag depending on mixing source + */ + if (source == MIX_FAILSAFE) { + r_status_flags |= PX4IO_P_STATUS_FLAGS_FAILSAFE; + } else { + r_status_flags &= ~(PX4IO_P_STATUS_FLAGS_FAILSAFE); + } + + /* * Run the mixers. */ if (source == MIX_FAILSAFE) { /* copy failsafe values to the servo outputs */ - for (unsigned i = 0; i < IO_SERVO_COUNT; i++) + for (unsigned i = 0; i < IO_SERVO_COUNT; i++) { r_page_servos[i] = r_page_servo_failsafe[i]; + /* safe actuators for FMU feedback */ + r_page_actuators[i] = (r_page_servos[i] - 1500) / 600.0f; + } + + } else if (source != MIX_NONE) { float outputs[IO_SERVO_COUNT]; @@ -156,7 +177,7 @@ mixer_tick(void) r_page_actuators[i] = FLOAT_TO_REG(outputs[i]); /* scale to servo output */ - r_page_servos[i] = (outputs[i] * 500.0f) + 1500; + r_page_servos[i] = (outputs[i] * 600.0f) + 1500; } for (unsigned i = mixed; i < IO_SERVO_COUNT; i++) @@ -175,7 +196,7 @@ mixer_tick(void) bool should_arm = ( /* FMU is armed */ (r_setup_arming & PX4IO_P_SETUP_ARMING_FMU_ARMED) && /* IO is armed */ (r_status_flags & PX4IO_P_STATUS_FLAGS_ARMED) && - /* there is valid input */ (r_status_flags & (PX4IO_P_STATUS_FLAGS_RAW_PWM | PX4IO_P_STATUS_FLAGS_MIXER_OK)) && + /* there is valid input via direct PWM or mixer */ (r_status_flags & (PX4IO_P_STATUS_FLAGS_RAW_PWM | PX4IO_P_STATUS_FLAGS_MIXER_OK)) && /* IO initialised without error */ (r_status_flags & PX4IO_P_STATUS_FLAGS_INIT_OK) && /* FMU is available or FMU is not available but override is an option */ ((r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_OK) || (!(r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_OK) && (r_setup_arming & PX4IO_P_SETUP_ARMING_MANUAL_OVERRIDE_OK) )) @@ -225,7 +246,7 @@ mixer_callback(uintptr_t handle, case MIX_FAILSAFE: case MIX_NONE: - /* XXX we could allow for configuration of per-output failsafe values */ + control = 0.0f; return -1; } @@ -273,8 +294,7 @@ mixer_handle_text(const void *buffer, size_t length) case F2I_MIXER_ACTION_APPEND: isr_debug(2, "append %d", length); - /* check for overflow - this is really fatal */ - /* XXX could add just what will fit & try to parse, then repeat... */ + /* check for overflow - this would be really fatal */ if ((mixer_text_length + text_length + 1) > sizeof(mixer_text)) { r_status_flags &= ~PX4IO_P_STATUS_FLAGS_MIXER_OK; return; @@ -293,8 +313,13 @@ mixer_handle_text(const void *buffer, size_t length) /* if anything was parsed */ if (resid != mixer_text_length) { - /* ideally, this should test resid == 0 ? */ - r_status_flags |= PX4IO_P_STATUS_FLAGS_MIXER_OK; + /* only set mixer ok if no residual is left over */ + if (resid == 0) { + r_status_flags |= PX4IO_P_STATUS_FLAGS_MIXER_OK; + } else { + /* not yet reached the end of the mixer, set as not ok */ + r_status_flags &= ~PX4IO_P_STATUS_FLAGS_MIXER_OK; + } isr_debug(2, "used %u", mixer_text_length - resid); @@ -303,8 +328,43 @@ mixer_handle_text(const void *buffer, size_t length) memcpy(&mixer_text[0], &mixer_text[mixer_text_length - resid], resid); mixer_text_length = resid; + + /* update failsafe values */ + mixer_set_failsafe(); } break; } } + +static void +mixer_set_failsafe() +{ + /* + * Check if a custom failsafe value has been written, + * or if the mixer is not ok and bail out. + */ + if ((r_setup_arming & PX4IO_P_SETUP_ARMING_FAILSAFE_CUSTOM) || + !(r_status_flags & PX4IO_P_STATUS_FLAGS_MIXER_OK)) + return; + + /* set failsafe defaults to the values for all inputs = 0 */ + float outputs[IO_SERVO_COUNT]; + unsigned mixed; + + /* mix */ + mixed = mixer_group.mix(&outputs[0], IO_SERVO_COUNT); + + /* scale to PWM and update the servo outputs as required */ + for (unsigned i = 0; i < mixed; i++) { + + /* scale to servo output */ + r_page_servo_failsafe[i] = (outputs[i] * 600.0f) + 1500; + + } + + /* disable the rest of the outputs */ + for (unsigned i = mixed; i < IO_SERVO_COUNT; i++) + r_page_servo_failsafe[i] = 0; + +} diff --git a/src/modules/px4iofirmware/protocol.h b/src/modules/px4iofirmware/protocol.h index e575bd841..674f9dddd 100644 --- a/src/modules/px4iofirmware/protocol.h +++ b/src/modules/px4iofirmware/protocol.h @@ -85,7 +85,7 @@ #define PX4IO_P_CONFIG_ACTUATOR_COUNT 5 /* hardcoded max actuator output count */ #define PX4IO_P_CONFIG_RC_INPUT_COUNT 6 /* hardcoded max R/C input count supported */ #define PX4IO_P_CONFIG_ADC_INPUT_COUNT 7 /* hardcoded max ADC inputs */ -#define PX4IO_P_CONFIG_RELAY_COUNT 8 /* harcoded # of relay outputs */ +#define PX4IO_P_CONFIG_RELAY_COUNT 8 /* hardcoded # of relay outputs */ /* dynamic status page */ #define PX4IO_PAGE_STATUS 1 @@ -104,6 +104,7 @@ #define PX4IO_P_STATUS_FLAGS_MIXER_OK (1 << 8) /* mixer is OK */ #define PX4IO_P_STATUS_FLAGS_ARM_SYNC (1 << 9) /* the arming state between IO and FMU is in sync */ #define PX4IO_P_STATUS_FLAGS_INIT_OK (1 << 10) /* initialisation of the IO completed without error */ +#define PX4IO_P_STATUS_FLAGS_FAILSAFE (1 << 11) /* failsafe is active */ #define PX4IO_P_STATUS_ALARMS 3 /* alarm flags - alarms latch, write 1 to a bit to clear it */ #define PX4IO_P_STATUS_ALARMS_VBATT_LOW (1 << 0) /* VBatt is very close to regulator dropout */ @@ -148,6 +149,7 @@ #define PX4IO_P_SETUP_ARMING_IO_ARM_OK (1 << 0) /* OK to arm the IO side */ #define PX4IO_P_SETUP_ARMING_FMU_ARMED (1 << 1) /* FMU is already armed */ #define PX4IO_P_SETUP_ARMING_MANUAL_OVERRIDE_OK (1 << 2) /* OK to switch to manual override via override RC channel */ +#define PX4IO_P_SETUP_ARMING_FAILSAFE_CUSTOM (1 << 3) /* use custom failsafe values, not 0 values of mixer */ #define PX4IO_P_SETUP_ARMING_INAIR_RESTART_OK (1 << 4) /* OK to try in-air restart */ #define PX4IO_P_SETUP_PWM_RATES 2 /* bitmask, 0 = low rate, 1 = high rate */ diff --git a/src/modules/px4iofirmware/registers.c b/src/modules/px4iofirmware/registers.c index 9698a0f2f..df7d6dcd3 100644 --- a/src/modules/px4iofirmware/registers.c +++ b/src/modules/px4iofirmware/registers.c @@ -41,6 +41,7 @@ #include <stdbool.h> #include <stdlib.h> +#include <string.h> #include <drivers/drv_hrt.h> @@ -178,8 +179,10 @@ uint16_t r_page_rc_input_config[MAX_CONTROL_CHANNELS * PX4IO_P_RC_CONFIG_STRIDE * PAGE 105 * * Failsafe servo PWM values + * + * Disable pulses as default. */ -uint16_t r_page_servo_failsafe[IO_SERVO_COUNT]; +uint16_t r_page_servo_failsafe[IO_SERVO_COUNT] = { 0 }; void registers_set(uint8_t page, uint8_t offset, const uint16_t *values, unsigned num_values) @@ -230,11 +233,14 @@ registers_set(uint8_t page, uint8_t offset, const uint16_t *values, unsigned num case PX4IO_PAGE_FAILSAFE_PWM: /* copy channel data */ - while ((offset < PX4IO_CONTROL_CHANNELS) && (num_values > 0)) { + while ((offset < IO_SERVO_COUNT) && (num_values > 0)) { /* XXX range-check value? */ r_page_servo_failsafe[offset] = *values; + /* flag the failsafe values as custom */ + r_setup_arming |= PX4IO_P_SETUP_ARMING_FAILSAFE_CUSTOM; + offset++; num_values--; values++; diff --git a/src/modules/sdlog2/logbuffer.c b/src/modules/sdlog2/logbuffer.c new file mode 100644 index 000000000..8aaafaf31 --- /dev/null +++ b/src/modules/sdlog2/logbuffer.c @@ -0,0 +1,134 @@ +/**************************************************************************** + * + * Copyright (c) 2013 PX4 Development Team. All rights reserved. + * Author: Anton Babushkin <rk3dov@gmail.com> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file logbuffer.c + * + * Ring FIFO buffer for binary log data. + * + * @author Anton Babushkin <rk3dov@gmail.com> + */ + +#include <string.h> +#include <stdlib.h> + +#include "logbuffer.h" + +int logbuffer_init(struct logbuffer_s *lb, int size) +{ + lb->size = size; + lb->write_ptr = 0; + lb->read_ptr = 0; + lb->data = malloc(lb->size); + return (lb->data == 0) ? ERROR : OK; +} + +int logbuffer_count(struct logbuffer_s *lb) +{ + int n = lb->write_ptr - lb->read_ptr; + + if (n < 0) { + n += lb->size; + } + + return n; +} + +int logbuffer_is_empty(struct logbuffer_s *lb) +{ + return lb->read_ptr == lb->write_ptr; +} + +bool logbuffer_write(struct logbuffer_s *lb, void *ptr, int size) +{ + // bytes available to write + int available = lb->read_ptr - lb->write_ptr - 1; + + if (available < 0) + available += lb->size; + + if (size > available) { + // buffer overflow + return false; + } + + char *c = (char *) ptr; + int n = lb->size - lb->write_ptr; // bytes to end of the buffer + + if (n < size) { + // message goes over end of the buffer + memcpy(&(lb->data[lb->write_ptr]), c, n); + lb->write_ptr = 0; + + } else { + n = 0; + } + + // now: n = bytes already written + int p = size - n; // number of bytes to write + memcpy(&(lb->data[lb->write_ptr]), &(c[n]), p); + lb->write_ptr = (lb->write_ptr + p) % lb->size; + return true; +} + +int logbuffer_get_ptr(struct logbuffer_s *lb, void **ptr, bool *is_part) +{ + // bytes available to read + int available = lb->write_ptr - lb->read_ptr; + + if (available == 0) { + return 0; // buffer is empty + } + + int n = 0; + + if (available > 0) { + // read pointer is before write pointer, all available bytes can be read + n = available; + *is_part = false; + + } else { + // read pointer is after write pointer, read bytes from read_ptr to end of the buffer + n = lb->size - lb->read_ptr; + *is_part = true; + } + + *ptr = &(lb->data[lb->read_ptr]); + return n; +} + +void logbuffer_mark_read(struct logbuffer_s *lb, int n) +{ + lb->read_ptr = (lb->read_ptr + n) % lb->size; +} diff --git a/src/modules/sdlog2/logbuffer.h b/src/modules/sdlog2/logbuffer.h new file mode 100644 index 000000000..31521f722 --- /dev/null +++ b/src/modules/sdlog2/logbuffer.h @@ -0,0 +1,68 @@ +/**************************************************************************** + * + * Copyright (c) 2013 PX4 Development Team. All rights reserved. + * Author: Anton Babushkin <rk3dov@gmail.com> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file logbuffer.h + * + * Ring FIFO buffer for binary log data. + * + * @author Anton Babushkin <rk3dov@gmail.com> + */ + +#ifndef SDLOG2_RINGBUFFER_H_ +#define SDLOG2_RINGBUFFER_H_ + +#include <stdbool.h> + +struct logbuffer_s { + // pointers and size are in bytes + int write_ptr; + int read_ptr; + int size; + char *data; +}; + +int logbuffer_init(struct logbuffer_s *lb, int size); + +int logbuffer_count(struct logbuffer_s *lb); + +int logbuffer_is_empty(struct logbuffer_s *lb); + +bool logbuffer_write(struct logbuffer_s *lb, void *ptr, int size); + +int logbuffer_get_ptr(struct logbuffer_s *lb, void **ptr, bool *is_part); + +void logbuffer_mark_read(struct logbuffer_s *lb, int n); + +#endif diff --git a/src/modules/sdlog2/module.mk b/src/modules/sdlog2/module.mk new file mode 100644 index 000000000..f53129688 --- /dev/null +++ b/src/modules/sdlog2/module.mk @@ -0,0 +1,43 @@ +############################################################################ +# +# Copyright (c) 2013 PX4 Development Team. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name PX4 nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +# +# sdlog2 Application +# + +MODULE_COMMAND = sdlog2 +# The main thread only buffers to RAM, needs a high priority +MODULE_PRIORITY = "SCHED_PRIORITY_MAX-30" + +SRCS = sdlog2.c \ + logbuffer.c diff --git a/src/modules/sdlog2/sdlog2.c b/src/modules/sdlog2/sdlog2.c new file mode 100644 index 000000000..a14bd6f80 --- /dev/null +++ b/src/modules/sdlog2/sdlog2.c @@ -0,0 +1,1178 @@ +/**************************************************************************** + * + * Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. + * Author: Lorenz Meier <lm@inf.ethz.ch> + * Anton Babushkin <rk3dov@gmail.com> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file sdlog2.c + * + * Simple SD logger for flight data. Buffers new sensor values and + * does the heavy SD I/O in a low-priority worker thread. + * + * @author Lorenz Meier <lm@inf.ethz.ch> + * @author Anton Babushkin <rk3dov@gmail.com> + */ + +#include <nuttx/config.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <sys/prctl.h> +#include <fcntl.h> +#include <errno.h> +#include <unistd.h> +#include <stdio.h> +#include <poll.h> +#include <stdlib.h> +#include <string.h> +#include <ctype.h> +#include <systemlib/err.h> +#include <unistd.h> +#include <drivers/drv_hrt.h> + +#include <uORB/uORB.h> +#include <uORB/topics/vehicle_status.h> +#include <uORB/topics/sensor_combined.h> +#include <uORB/topics/vehicle_attitude.h> +#include <uORB/topics/vehicle_attitude_setpoint.h> +#include <uORB/topics/actuator_outputs.h> +#include <uORB/topics/actuator_controls.h> +#include <uORB/topics/actuator_controls_effective.h> +#include <uORB/topics/vehicle_command.h> +#include <uORB/topics/vehicle_local_position.h> +#include <uORB/topics/vehicle_local_position_setpoint.h> +#include <uORB/topics/vehicle_global_position.h> +#include <uORB/topics/vehicle_gps_position.h> +#include <uORB/topics/vehicle_vicon_position.h> +#include <uORB/topics/optical_flow.h> +#include <uORB/topics/battery_status.h> +#include <uORB/topics/differential_pressure.h> +#include <uORB/topics/airspeed.h> +#include <uORB/topics/rc_channels.h> + +#include <systemlib/systemlib.h> + +#include <mavlink/mavlink_log.h> + +#include "logbuffer.h" +#include "sdlog2_format.h" +#include "sdlog2_messages.h" + +#define LOGBUFFER_WRITE_AND_COUNT(_msg) if (logbuffer_write(&lb, &log_msg, LOG_PACKET_SIZE(_msg))) { \ + log_msgs_written++; \ + } else { \ + log_msgs_skipped++; \ + /*printf("skip\n");*/ \ + } + +#define LOG_ORB_SUBSCRIBE(_var, _topic) subs.##_var##_sub = orb_subscribe(ORB_ID(##_topic##)); \ + fds[fdsc_count].fd = subs.##_var##_sub; \ + fds[fdsc_count].events = POLLIN; \ + fdsc_count++; + + +//#define SDLOG2_DEBUG + +static bool thread_should_exit = false; /**< Deamon exit flag */ +static bool thread_running = false; /**< Deamon status flag */ +static int deamon_task; /**< Handle of deamon task / thread */ +static bool logwriter_should_exit = false; /**< Logwriter thread exit flag */ +static const int MAX_NO_LOGFOLDER = 999; /**< Maximum number of log folders */ +static const int MAX_NO_LOGFILE = 999; /**< Maximum number of log files */ +static const int LOG_BUFFER_SIZE_DEFAULT = 8192; +static const int MAX_WRITE_CHUNK = 512; +static const int MIN_BYTES_TO_WRITE = 512; + +static const char *mountpoint = "/fs/microsd"; +int log_file = -1; +int mavlink_fd = -1; +struct logbuffer_s lb; + +/* mutex / condition to synchronize threads */ +pthread_mutex_t logbuffer_mutex; +pthread_cond_t logbuffer_cond; + +char folder_path[64]; + +/* statistics counters */ +unsigned long log_bytes_written = 0; +uint64_t start_time = 0; +unsigned long log_msgs_written = 0; +unsigned long log_msgs_skipped = 0; + +/* current state of logging */ +bool logging_enabled = false; +/* enable logging on start (-e option) */ +bool log_on_start = false; +/* enable logging when armed (-a option) */ +bool log_when_armed = false; +/* delay = 1 / rate (rate defined by -r option) */ +useconds_t sleep_delay = 0; + +/* helper flag to track system state changes */ +bool flag_system_armed = false; + +pthread_t logwriter_pthread = 0; + +/** + * Log buffer writing thread. Open and close file here. + */ +static void *logwriter_thread(void *arg); + +/** + * SD log management function. + */ +__EXPORT int sdlog2_main(int argc, char *argv[]); + +/** + * Mainloop of sd log deamon. + */ +int sdlog2_thread_main(int argc, char *argv[]); + +/** + * Print the correct usage. + */ +static void sdlog2_usage(const char *reason); + +/** + * Print the current status. + */ +static void sdlog2_status(void); + +/** + * Start logging: create new file and start log writer thread. + */ +void sdlog2_start_log(); + +/** + * Stop logging: stop log writer thread and close log file. + */ +void sdlog2_stop_log(); + +/** + * Write a header to log file: list of message formats. + */ +void write_formats(int fd); + + +static bool file_exist(const char *filename); + +static int file_copy(const char *file_old, const char *file_new); + +static void handle_command(struct vehicle_command_s *cmd); + +static void handle_status(struct vehicle_status_s *cmd); + +/** + * Create folder for current logging session. Store folder name in 'log_folder'. + */ +static int create_logfolder(); + +/** + * Select first free log file name and open it. + */ +static int open_logfile(); + +static void +sdlog2_usage(const char *reason) +{ + if (reason) + fprintf(stderr, "%s\n", reason); + + errx(1, "usage: sdlog2 {start|stop|status} [-r <log rate>] [-b <buffer size>] -e -a\n" + "\t-r\tLog rate in Hz, 0 means unlimited rate\n" + "\t-b\tLog buffer size in KiB, default is 8\n" + "\t-e\tEnable logging by default (if not, can be started by command)\n" + "\t-a\tLog only when armed (can be still overriden by command)\n"); +} + +/** + * The logger deamon app only briefly exists to start + * the background job. The stack size assigned in the + * Makefile does only apply to this management task. + * + * The actual stack size should be set in the call + * to task_spawn(). + */ +int sdlog2_main(int argc, char *argv[]) +{ + if (argc < 2) + sdlog2_usage("missing command"); + + if (!strcmp(argv[1], "start")) { + + if (thread_running) { + printf("sdlog2 already running\n"); + /* this is not an error */ + exit(0); + } + + thread_should_exit = false; + deamon_task = task_spawn("sdlog2", + SCHED_DEFAULT, + SCHED_PRIORITY_DEFAULT - 30, + 2048, + sdlog2_thread_main, + (const char **)argv); + exit(0); + } + + if (!strcmp(argv[1], "stop")) { + if (!thread_running) { + printf("\tsdlog2 is not started\n"); + } + + thread_should_exit = true; + exit(0); + } + + if (!strcmp(argv[1], "status")) { + if (thread_running) { + sdlog2_status(); + + } else { + printf("\tsdlog2 not started\n"); + } + + exit(0); + } + + sdlog2_usage("unrecognized command"); + exit(1); +} + +int create_logfolder() +{ + /* make folder on sdcard */ + uint16_t folder_number = 1; // start with folder sess001 + int mkdir_ret; + + /* look for the next folder that does not exist */ + while (folder_number <= MAX_NO_LOGFOLDER) { + /* set up folder path: e.g. /fs/microsd/sess001 */ + sprintf(folder_path, "%s/sess%03u", mountpoint, folder_number); + mkdir_ret = mkdir(folder_path, S_IRWXU | S_IRWXG | S_IRWXO); + /* the result is -1 if the folder exists */ + + if (mkdir_ret == 0) { + /* folder does not exist, success */ + + /* copy parser script file */ + // TODO + /* + char mfile_out[100]; + sprintf(mfile_out, "%s/session%04u/run_to_plot_data.m", mountpoint, foldernumber); + int ret = file_copy(mfile_in, mfile_out); + + if (!ret) { + warnx("copied m file to %s", mfile_out); + + } else { + warnx("failed copying m file from %s to\n %s", mfile_in, mfile_out); + } + */ + + break; + + } else if (mkdir_ret == -1) { + /* folder exists already */ + folder_number++; + continue; + + } else { + warn("failed creating new folder"); + return -1; + } + } + + if (folder_number >= MAX_NO_LOGFOLDER) { + /* we should not end up here, either we have more than MAX_NO_LOGFOLDER on the SD card, or another problem */ + warnx("all %d possible folders exist already.", MAX_NO_LOGFOLDER); + return -1; + } + + return 0; +} + +int open_logfile() +{ + /* make folder on sdcard */ + uint16_t file_number = 1; // start with file log001 + + /* string to hold the path to the log */ + char path_buf[64] = ""; + + int fd = 0; + + /* look for the next file that does not exist */ + while (file_number <= MAX_NO_LOGFILE) { + /* set up file path: e.g. /fs/microsd/sess001/log001.bin */ + sprintf(path_buf, "%s/log%03u.bin", folder_path, file_number); + + if (file_exist(path_buf)) { + file_number++; + continue; + } + + fd = open(path_buf, O_CREAT | O_WRONLY | O_DSYNC); + + if (fd == 0) { + errx(1, "opening %s failed.", path_buf); + } + + warnx("logging to: %s", path_buf); + mavlink_log_info(mavlink_fd, "[sdlog2] log: %s", path_buf); + + return fd; + } + + if (file_number > MAX_NO_LOGFILE) { + /* we should not end up here, either we have more than MAX_NO_LOGFILE on the SD card, or another problem */ + warn("all %d possible files exist already", MAX_NO_LOGFILE); + return -1; + } + + return 0; +} + +static void *logwriter_thread(void *arg) +{ + /* set name */ + prctl(PR_SET_NAME, "sdlog2_writer", 0); + + struct logbuffer_s *logbuf = (struct logbuffer_s *)arg; + + int log_file = open_logfile(); + + /* write log messages formats */ + write_formats(log_file); + + int poll_count = 0; + + void *read_ptr; + int n = 0; + bool should_wait = false; + bool is_part = false; + + while (!thread_should_exit && !logwriter_should_exit) { + + /* make sure threads are synchronized */ + pthread_mutex_lock(&logbuffer_mutex); + + /* update read pointer if needed */ + if (n > 0) { + logbuffer_mark_read(&lb, n); + } + + /* only wait if no data is available to process */ + if (should_wait) { + /* blocking wait for new data at this line */ + pthread_cond_wait(&logbuffer_cond, &logbuffer_mutex); + } + + /* only get pointer to thread-safe data, do heavy I/O a few lines down */ + int available = logbuffer_get_ptr(logbuf, &read_ptr, &is_part); + + /* continue */ + pthread_mutex_unlock(&logbuffer_mutex); + + if (available > 0) { + /* do heavy IO here */ + if (available > MAX_WRITE_CHUNK) { + n = MAX_WRITE_CHUNK; + + } else { + n = available; + } + + n = write(log_file, read_ptr, n); + + should_wait = (n == available) && !is_part; +#ifdef SDLOG2_DEBUG + printf("%i wrote: %i of %i, is_part=%i, should_wait=%i", poll_count, n, available, (int)is_part, (int)should_wait); +#endif + + if (n < 0) { + thread_should_exit = true; + err(1, "error writing log file"); + } + + if (n > 0) { + log_bytes_written += n; + } + + } else { + should_wait = true; + } + + if (poll_count % 10 == 0) { + fsync(log_file); + } + + poll_count++; + } + + fsync(log_file); + close(log_file); + + return OK; +} + +void sdlog2_start_log() +{ + warnx("start logging."); + mavlink_log_info(mavlink_fd, "[sdlog2] start logging"); + + /* initialize statistics counter */ + log_bytes_written = 0; + start_time = hrt_absolute_time(); + log_msgs_written = 0; + log_msgs_skipped = 0; + + /* initialize log buffer emptying thread */ + pthread_attr_t receiveloop_attr; + pthread_attr_init(&receiveloop_attr); + + struct sched_param param; + /* low priority, as this is expensive disk I/O */ + param.sched_priority = SCHED_PRIORITY_DEFAULT - 40; + (void)pthread_attr_setschedparam(&receiveloop_attr, ¶m); + + pthread_attr_setstacksize(&receiveloop_attr, 2048); + + logwriter_should_exit = false; + pthread_t thread; + + /* start log buffer emptying thread */ + if (0 != pthread_create(&thread, &receiveloop_attr, logwriter_thread, &lb)) { + errx(1, "error creating logwriter thread"); + } + + logging_enabled = true; + // XXX we have to destroy the attr at some point +} + +void sdlog2_stop_log() +{ + warnx("stop logging."); + mavlink_log_info(mavlink_fd, "[sdlog2] stop logging"); + + logging_enabled = false; + logwriter_should_exit = true; + + /* wake up write thread one last time */ + pthread_mutex_lock(&logbuffer_mutex); + pthread_cond_signal(&logbuffer_cond); + /* unlock, now the writer thread may return */ + pthread_mutex_unlock(&logbuffer_mutex); + + /* wait for write thread to return */ + (void)pthread_join(logwriter_pthread, NULL); + + sdlog2_status(); +} + + +void write_formats(int fd) +{ + /* construct message format packet */ + struct { + LOG_PACKET_HEADER; + struct log_format_s body; + } log_format_packet = { + LOG_PACKET_HEADER_INIT(LOG_FORMAT_MSG), + }; + + /* fill message format packet for each format and write to log */ + int i; + + for (i = 0; i < log_formats_num; i++) { + log_format_packet.body = log_formats[i]; + write(fd, &log_format_packet, sizeof(log_format_packet)); + } + + fsync(fd); +} + +int sdlog2_thread_main(int argc, char *argv[]) +{ + mavlink_fd = open(MAVLINK_LOG_DEVICE, 0); + + if (mavlink_fd < 0) { + warnx("failed to open MAVLink log stream, start mavlink app first."); + } + + /* log buffer size */ + int log_buffer_size = LOG_BUFFER_SIZE_DEFAULT; + + /* work around some stupidity in task_create's argv handling */ + argc -= 2; + argv += 2; + int ch; + + while ((ch = getopt(argc, argv, "r:b:ea")) != EOF) { + switch (ch) { + case 'r': { + unsigned long r = strtoul(optarg, NULL, 10); + + if (r == 0) { + sleep_delay = 0; + + } else { + sleep_delay = 1000000 / r; + } + } + break; + + case 'b': { + unsigned long s = strtoul(optarg, NULL, 10); + + if (s < 1) { + s = 1; + } + + log_buffer_size = 1024 * s; + } + break; + + case 'e': + log_on_start = true; + break; + + case 'a': + log_when_armed = true; + break; + + case '?': + if (optopt == 'c') { + warnx("Option -%c requires an argument.", optopt); + + } else if (isprint(optopt)) { + warnx("Unknown option `-%c'.", optopt); + + } else { + warnx("Unknown option character `\\x%x'.", optopt); + } + + default: + sdlog2_usage("unrecognized flag"); + errx(1, "exiting."); + } + } + + if (!file_exist(mountpoint)) { + errx(1, "logging mount point %s not present, exiting.", mountpoint); + } + + if (create_logfolder()) { + errx(1, "unable to create logging folder, exiting."); + } + + /* only print logging path, important to find log file later */ + warnx("logging to directory: %s", folder_path); + + /* initialize log buffer with specified size */ + warnx("log buffer size: %i bytes.", log_buffer_size); + + if (OK != logbuffer_init(&lb, log_buffer_size)) { + errx(1, "can't allocate log buffer, exiting."); + } + + /* file descriptors to wait for */ + struct pollfd fds_control[2]; + + /* --- IMPORTANT: DEFINE NUMBER OF ORB STRUCTS TO WAIT FOR HERE --- */ + /* number of messages */ + const ssize_t fdsc = 15; + /* Sanity check variable and index */ + ssize_t fdsc_count = 0; + /* file descriptors to wait for */ + struct pollfd fds[fdsc]; + + struct vehicle_status_s buf_status; + memset(&buf_status, 0, sizeof(buf_status)); + + /* warning! using union here to save memory, elements should be used separately! */ + union { + struct vehicle_command_s cmd; + struct sensor_combined_s sensor; + struct vehicle_attitude_s att; + struct vehicle_attitude_setpoint_s att_sp; + struct actuator_outputs_s act_outputs; + struct actuator_controls_s act_controls; + struct actuator_controls_effective_s act_controls_effective; + struct vehicle_local_position_s local_pos; + struct vehicle_local_position_setpoint_s local_pos_sp; + struct vehicle_global_position_s global_pos; + struct vehicle_gps_position_s gps_pos; + struct vehicle_vicon_position_s vicon_pos; + struct optical_flow_s flow; + struct rc_channels_s rc; + struct differential_pressure_s diff_pres; + struct airspeed_s airspeed; + } buf; + memset(&buf, 0, sizeof(buf)); + + struct { + int cmd_sub; + int status_sub; + int sensor_sub; + int att_sub; + int att_sp_sub; + int act_outputs_sub; + int act_controls_sub; + int act_controls_effective_sub; + int local_pos_sub; + int local_pos_sp_sub; + int global_pos_sub; + int gps_pos_sub; + int vicon_pos_sub; + int flow_sub; + int rc_sub; + } subs; + + /* log message buffer: header + body */ +#pragma pack(push, 1) + struct { + LOG_PACKET_HEADER; + union { + struct log_TIME_s log_TIME; + struct log_ATT_s log_ATT; + struct log_ATSP_s log_ATSP; + struct log_IMU_s log_IMU; + struct log_SENS_s log_SENS; + struct log_LPOS_s log_LPOS; + struct log_LPSP_s log_LPSP; + struct log_GPS_s log_GPS; + struct log_ATTC_s log_ATTC; + struct log_STAT_s log_STAT; + struct log_RC_s log_RC; + struct log_OUT0_s log_OUT0; + } body; + } log_msg = { + LOG_PACKET_HEADER_INIT(0) + }; +#pragma pack(pop) + memset(&log_msg.body, 0, sizeof(log_msg.body)); + + /* --- VEHICLE COMMAND --- */ + subs.cmd_sub = orb_subscribe(ORB_ID(vehicle_command)); + fds[fdsc_count].fd = subs.cmd_sub; + fds[fdsc_count].events = POLLIN; + fdsc_count++; + + /* --- VEHICLE STATUS --- */ + subs.status_sub = orb_subscribe(ORB_ID(vehicle_status)); + fds[fdsc_count].fd = subs.status_sub; + fds[fdsc_count].events = POLLIN; + fdsc_count++; + + /* --- GPS POSITION --- */ + subs.gps_pos_sub = orb_subscribe(ORB_ID(vehicle_gps_position)); + fds[fdsc_count].fd = subs.gps_pos_sub; + fds[fdsc_count].events = POLLIN; + fdsc_count++; + + /* --- SENSORS COMBINED --- */ + subs.sensor_sub = orb_subscribe(ORB_ID(sensor_combined)); + fds[fdsc_count].fd = subs.sensor_sub; + fds[fdsc_count].events = POLLIN; + fdsc_count++; + + /* --- ATTITUDE --- */ + subs.att_sub = orb_subscribe(ORB_ID(vehicle_attitude)); + fds[fdsc_count].fd = subs.att_sub; + fds[fdsc_count].events = POLLIN; + fdsc_count++; + + /* --- ATTITUDE SETPOINT --- */ + subs.att_sp_sub = orb_subscribe(ORB_ID(vehicle_attitude_setpoint)); + fds[fdsc_count].fd = subs.att_sp_sub; + fds[fdsc_count].events = POLLIN; + fdsc_count++; + + /* --- ACTUATOR OUTPUTS --- */ + subs.act_outputs_sub = orb_subscribe(ORB_ID_VEHICLE_CONTROLS); + fds[fdsc_count].fd = subs.act_outputs_sub; + fds[fdsc_count].events = POLLIN; + fdsc_count++; + + /* --- ACTUATOR CONTROL --- */ + subs.act_controls_sub = orb_subscribe(ORB_ID_VEHICLE_ATTITUDE_CONTROLS); + fds[fdsc_count].fd = subs.act_controls_sub; + fds[fdsc_count].events = POLLIN; + fdsc_count++; + + /* --- ACTUATOR CONTROL EFFECTIVE --- */ + subs.act_controls_effective_sub = orb_subscribe(ORB_ID_VEHICLE_ATTITUDE_CONTROLS_EFFECTIVE); + fds[fdsc_count].fd = subs.act_controls_effective_sub; + fds[fdsc_count].events = POLLIN; + fdsc_count++; + + /* --- LOCAL POSITION --- */ + subs.local_pos_sub = orb_subscribe(ORB_ID(vehicle_local_position)); + fds[fdsc_count].fd = subs.local_pos_sub; + fds[fdsc_count].events = POLLIN; + fdsc_count++; + + /* --- LOCAL POSITION SETPOINT --- */ + subs.local_pos_sp_sub = orb_subscribe(ORB_ID(vehicle_local_position_setpoint)); + fds[fdsc_count].fd = subs.local_pos_sp_sub; + fds[fdsc_count].events = POLLIN; + fdsc_count++; + + /* --- GLOBAL POSITION --- */ + subs.global_pos_sub = orb_subscribe(ORB_ID(vehicle_global_position)); + fds[fdsc_count].fd = subs.global_pos_sub; + fds[fdsc_count].events = POLLIN; + fdsc_count++; + + /* --- VICON POSITION --- */ + subs.vicon_pos_sub = orb_subscribe(ORB_ID(vehicle_vicon_position)); + fds[fdsc_count].fd = subs.vicon_pos_sub; + fds[fdsc_count].events = POLLIN; + fdsc_count++; + + /* --- OPTICAL FLOW --- */ + subs.flow_sub = orb_subscribe(ORB_ID(optical_flow)); + fds[fdsc_count].fd = subs.flow_sub; + fds[fdsc_count].events = POLLIN; + fdsc_count++; + + /* --- RC CHANNELS --- */ + subs.rc_sub = orb_subscribe(ORB_ID(rc_channels)); + fds[fdsc_count].fd = subs.rc_sub; + fds[fdsc_count].events = POLLIN; + fdsc_count++; + + /* WARNING: If you get the error message below, + * then the number of registered messages (fdsc) + * differs from the number of messages in the above list. + */ + if (fdsc_count > fdsc) { + warn("WARNING: Not enough space for poll fds allocated. Check %s:%d.", __FILE__, __LINE__); + fdsc_count = fdsc; + } + + /* + * set up poll to block for new data, + * wait for a maximum of 1000 ms + */ + const int poll_timeout = 1000; + + thread_running = true; + + /* initialize thread synchronization */ + pthread_mutex_init(&logbuffer_mutex, NULL); + pthread_cond_init(&logbuffer_cond, NULL); + + /* track changes in sensor_combined topic */ + uint16_t gyro_counter = 0; + uint16_t accelerometer_counter = 0; + uint16_t magnetometer_counter = 0; + uint16_t baro_counter = 0; + uint16_t differential_pressure_counter = 0; + + /* enable logging on start if needed */ + if (log_on_start) + sdlog2_start_log(); + + while (!thread_should_exit) { + /* decide use usleep() or blocking poll() */ + bool use_sleep = sleep_delay > 0 && logging_enabled; + + /* poll all topics if logging enabled or only management (first 2) if not */ + int poll_ret = poll(fds, logging_enabled ? fdsc_count : 2, use_sleep ? 0 : poll_timeout); + + /* handle the poll result */ + if (poll_ret < 0) { + warnx("ERROR: poll error, stop logging."); + thread_should_exit = true; + + } else if (poll_ret > 0) { + + /* check all data subscriptions only if logging enabled, + * logging_enabled can be changed while checking vehicle_command and vehicle_status */ + bool check_data = logging_enabled; + int ifds = 0; + int handled_topics = 0; + + /* --- VEHICLE COMMAND - LOG MANAGEMENT --- */ + if (fds[ifds++].revents & POLLIN) { + orb_copy(ORB_ID(vehicle_command), subs.cmd_sub, &buf.cmd); + handle_command(&buf.cmd); + handled_topics++; + } + + /* --- VEHICLE STATUS - LOG MANAGEMENT --- */ + if (fds[ifds++].revents & POLLIN) { + orb_copy(ORB_ID(vehicle_status), subs.status_sub, &buf_status); + + if (log_when_armed) { + handle_status(&buf_status); + } + + handled_topics++; + } + + if (!logging_enabled || !check_data || handled_topics >= poll_ret) { + continue; + } + + ifds = 1; // Begin from fds[1] again + + pthread_mutex_lock(&logbuffer_mutex); + + /* write time stamp message */ + log_msg.msg_type = LOG_TIME_MSG; + log_msg.body.log_TIME.t = hrt_absolute_time(); + LOGBUFFER_WRITE_AND_COUNT(TIME); + + /* --- VEHICLE STATUS --- */ + if (fds[ifds++].revents & POLLIN) { + // Don't orb_copy, it's already done few lines above + log_msg.msg_type = LOG_STAT_MSG; + log_msg.body.log_STAT.state = (unsigned char) buf_status.state_machine; + log_msg.body.log_STAT.flight_mode = (unsigned char) buf_status.flight_mode; + log_msg.body.log_STAT.manual_control_mode = (unsigned char) buf_status.manual_control_mode; + log_msg.body.log_STAT.manual_sas_mode = (unsigned char) buf_status.manual_sas_mode; + log_msg.body.log_STAT.armed = (unsigned char) buf_status.flag_system_armed; + log_msg.body.log_STAT.battery_voltage = buf_status.voltage_battery; + log_msg.body.log_STAT.battery_current = buf_status.current_battery; + log_msg.body.log_STAT.battery_remaining = buf_status.battery_remaining; + log_msg.body.log_STAT.battery_warning = (unsigned char) buf_status.battery_warning; + LOGBUFFER_WRITE_AND_COUNT(STAT); + } + + /* --- GPS POSITION --- */ + if (fds[ifds++].revents & POLLIN) { + orb_copy(ORB_ID(vehicle_gps_position), subs.gps_pos_sub, &buf.gps_pos); + log_msg.msg_type = LOG_GPS_MSG; + log_msg.body.log_GPS.gps_time = buf.gps_pos.time_gps_usec; + log_msg.body.log_GPS.fix_type = buf.gps_pos.fix_type; + log_msg.body.log_GPS.eph = buf.gps_pos.eph_m; + log_msg.body.log_GPS.epv = buf.gps_pos.epv_m; + log_msg.body.log_GPS.lat = buf.gps_pos.lat; + log_msg.body.log_GPS.lon = buf.gps_pos.lon; + log_msg.body.log_GPS.alt = buf.gps_pos.alt * 0.001; + log_msg.body.log_GPS.vel_n = buf.gps_pos.vel_n_m_s; + log_msg.body.log_GPS.vel_e = buf.gps_pos.vel_e_m_s; + log_msg.body.log_GPS.vel_d = buf.gps_pos.vel_d_m_s; + log_msg.body.log_GPS.cog = buf.gps_pos.cog_rad; + LOGBUFFER_WRITE_AND_COUNT(GPS); + } + + /* --- SENSOR COMBINED --- */ + if (fds[ifds++].revents & POLLIN) { + orb_copy(ORB_ID(sensor_combined), subs.sensor_sub, &buf.sensor); + bool write_IMU = false; + bool write_SENS = false; + + if (buf.sensor.gyro_counter != gyro_counter) { + gyro_counter = buf.sensor.gyro_counter; + write_IMU = true; + } + + if (buf.sensor.accelerometer_counter != accelerometer_counter) { + accelerometer_counter = buf.sensor.accelerometer_counter; + write_IMU = true; + } + + if (buf.sensor.magnetometer_counter != magnetometer_counter) { + magnetometer_counter = buf.sensor.magnetometer_counter; + write_IMU = true; + } + + if (buf.sensor.baro_counter != baro_counter) { + baro_counter = buf.sensor.baro_counter; + write_SENS = true; + } + + if (buf.sensor.differential_pressure_counter != differential_pressure_counter) { + differential_pressure_counter = buf.sensor.differential_pressure_counter; + write_SENS = true; + } + + if (write_IMU) { + log_msg.msg_type = LOG_IMU_MSG; + log_msg.body.log_IMU.gyro_x = buf.sensor.gyro_rad_s[0]; + log_msg.body.log_IMU.gyro_y = buf.sensor.gyro_rad_s[1]; + log_msg.body.log_IMU.gyro_z = buf.sensor.gyro_rad_s[2]; + log_msg.body.log_IMU.acc_x = buf.sensor.accelerometer_m_s2[0]; + log_msg.body.log_IMU.acc_y = buf.sensor.accelerometer_m_s2[1]; + log_msg.body.log_IMU.acc_z = buf.sensor.accelerometer_m_s2[2]; + log_msg.body.log_IMU.mag_x = buf.sensor.magnetometer_ga[0]; + log_msg.body.log_IMU.mag_y = buf.sensor.magnetometer_ga[1]; + log_msg.body.log_IMU.mag_z = buf.sensor.magnetometer_ga[2]; + LOGBUFFER_WRITE_AND_COUNT(IMU); + } + + if (write_SENS) { + log_msg.msg_type = LOG_SENS_MSG; + log_msg.body.log_SENS.baro_pres = buf.sensor.baro_pres_mbar; + log_msg.body.log_SENS.baro_alt = buf.sensor.baro_alt_meter; + log_msg.body.log_SENS.baro_temp = buf.sensor.baro_temp_celcius; + log_msg.body.log_SENS.diff_pres = buf.sensor.differential_pressure_pa; + LOGBUFFER_WRITE_AND_COUNT(SENS); + } + } + + /* --- ATTITUDE --- */ + if (fds[ifds++].revents & POLLIN) { + orb_copy(ORB_ID(vehicle_attitude), subs.att_sub, &buf.att); + log_msg.msg_type = LOG_ATT_MSG; + log_msg.body.log_ATT.roll = buf.att.roll; + log_msg.body.log_ATT.pitch = buf.att.pitch; + log_msg.body.log_ATT.yaw = buf.att.yaw; + LOGBUFFER_WRITE_AND_COUNT(ATT); + } + + /* --- ATTITUDE SETPOINT --- */ + if (fds[ifds++].revents & POLLIN) { + orb_copy(ORB_ID(vehicle_attitude_setpoint), subs.att_sp_sub, &buf.att_sp); + log_msg.msg_type = LOG_ATSP_MSG; + log_msg.body.log_ATSP.roll_sp = buf.att_sp.roll_body; + log_msg.body.log_ATSP.pitch_sp = buf.att_sp.pitch_body; + log_msg.body.log_ATSP.yaw_sp = buf.att_sp.yaw_body; + LOGBUFFER_WRITE_AND_COUNT(ATSP); + } + + /* --- ACTUATOR OUTPUTS --- */ + if (fds[ifds++].revents & POLLIN) { + orb_copy(ORB_ID(actuator_outputs_0), subs.act_outputs_sub, &buf.act_outputs); + log_msg.msg_type = LOG_OUT0_MSG; + memcpy(log_msg.body.log_OUT0.output, buf.act_outputs.output, sizeof(log_msg.body.log_OUT0.output)); + LOGBUFFER_WRITE_AND_COUNT(OUT0); + } + + /* --- ACTUATOR CONTROL --- */ + if (fds[ifds++].revents & POLLIN) { + orb_copy(ORB_ID_VEHICLE_ATTITUDE_CONTROLS, subs.act_controls_sub, &buf.act_controls); + log_msg.msg_type = LOG_ATTC_MSG; + log_msg.body.log_ATTC.roll = buf.act_controls.control[0]; + log_msg.body.log_ATTC.pitch = buf.act_controls.control[1]; + log_msg.body.log_ATTC.yaw = buf.act_controls.control[2]; + log_msg.body.log_ATTC.thrust = buf.act_controls.control[3]; + LOGBUFFER_WRITE_AND_COUNT(ATTC); + } + + /* --- ACTUATOR CONTROL EFFECTIVE --- */ + if (fds[ifds++].revents & POLLIN) { + orb_copy(ORB_ID_VEHICLE_ATTITUDE_CONTROLS_EFFECTIVE, subs.act_controls_effective_sub, &buf.act_controls_effective); + // TODO not implemented yet + } + + /* --- LOCAL POSITION --- */ + if (fds[ifds++].revents & POLLIN) { + orb_copy(ORB_ID(vehicle_local_position), subs.local_pos_sub, &buf.local_pos); + log_msg.msg_type = LOG_LPOS_MSG; + log_msg.body.log_LPOS.x = buf.local_pos.x; + log_msg.body.log_LPOS.y = buf.local_pos.y; + log_msg.body.log_LPOS.z = buf.local_pos.z; + log_msg.body.log_LPOS.vx = buf.local_pos.vx; + log_msg.body.log_LPOS.vy = buf.local_pos.vy; + log_msg.body.log_LPOS.vz = buf.local_pos.vz; + log_msg.body.log_LPOS.hdg = buf.local_pos.hdg; + log_msg.body.log_LPOS.home_lat = buf.local_pos.home_lat; + log_msg.body.log_LPOS.home_lon = buf.local_pos.home_lon; + log_msg.body.log_LPOS.home_alt = buf.local_pos.home_alt; + LOGBUFFER_WRITE_AND_COUNT(LPOS); + } + + /* --- LOCAL POSITION SETPOINT --- */ + if (fds[ifds++].revents & POLLIN) { + orb_copy(ORB_ID(vehicle_local_position_setpoint), subs.local_pos_sp_sub, &buf.local_pos_sp); + log_msg.msg_type = LOG_LPSP_MSG; + log_msg.body.log_LPSP.x = buf.local_pos_sp.x; + log_msg.body.log_LPSP.y = buf.local_pos_sp.y; + log_msg.body.log_LPSP.z = buf.local_pos_sp.z; + log_msg.body.log_LPSP.yaw = buf.local_pos_sp.yaw; + LOGBUFFER_WRITE_AND_COUNT(LPSP); + } + + /* --- GLOBAL POSITION --- */ + if (fds[ifds++].revents & POLLIN) { + orb_copy(ORB_ID(vehicle_global_position), subs.global_pos_sub, &buf.global_pos); + // TODO not implemented yet + } + + /* --- VICON POSITION --- */ + if (fds[ifds++].revents & POLLIN) { + orb_copy(ORB_ID(vehicle_vicon_position), subs.vicon_pos_sub, &buf.vicon_pos); + // TODO not implemented yet + } + + /* --- FLOW --- */ + if (fds[ifds++].revents & POLLIN) { + orb_copy(ORB_ID(optical_flow), subs.flow_sub, &buf.flow); + // TODO not implemented yet + } + + /* --- RC CHANNELS --- */ + if (fds[ifds++].revents & POLLIN) { + orb_copy(ORB_ID(rc_channels), subs.rc_sub, &buf.rc); + log_msg.msg_type = LOG_RC_MSG; + /* Copy only the first 8 channels of 14 */ + memcpy(log_msg.body.log_RC.channel, buf.rc.chan, sizeof(log_msg.body.log_RC.channel)); + LOGBUFFER_WRITE_AND_COUNT(RC); + } + + /* signal the other thread new data, but not yet unlock */ + if (logbuffer_count(&lb) > MIN_BYTES_TO_WRITE) { +#ifdef SDLOG2_DEBUG + printf("signal %i", logbuffer_count(&lb)); +#endif + /* only request write if several packets can be written at once */ + pthread_cond_signal(&logbuffer_cond); + } + + /* unlock, now the writer thread may run */ + pthread_mutex_unlock(&logbuffer_mutex); + } + + if (use_sleep) { + usleep(sleep_delay); + } + } + + if (logging_enabled) + sdlog2_stop_log(); + + pthread_mutex_destroy(&logbuffer_mutex); + pthread_cond_destroy(&logbuffer_cond); + + warnx("exiting."); + + thread_running = false; + + return 0; +} + +void sdlog2_status() +{ + float kibibytes = log_bytes_written / 1024.0f; + float mebibytes = kibibytes / 1024.0f; + float seconds = ((float)(hrt_absolute_time() - start_time)) / 1000000.0f; + + warnx("wrote %lu msgs, %4.2f MiB (average %5.3f KiB/s), skipped %lu msgs.", log_msgs_written, (double)mebibytes, (double)(kibibytes / seconds), log_msgs_skipped); + mavlink_log_info(mavlink_fd, "[sdlog2] wrote %lu msgs, skipped %lu msgs.", log_msgs_written, log_msgs_skipped); +} + +/** + * @return 0 if file exists + */ +bool file_exist(const char *filename) +{ + struct stat buffer; + return stat(filename, &buffer) == 0; +} + +int file_copy(const char *file_old, const char *file_new) +{ + FILE *source, *target; + source = fopen(file_old, "r"); + int ret = 0; + + if (source == NULL) { + warnx("failed opening input file to copy."); + return 1; + } + + target = fopen(file_new, "w"); + + if (target == NULL) { + fclose(source); + warnx("failed to open output file to copy."); + return 1; + } + + char buf[128]; + int nread; + + while ((nread = fread(buf, 1, sizeof(buf), source)) > 0) { + ret = fwrite(buf, 1, nread, target); + + if (ret <= 0) { + warnx("error writing file."); + ret = 1; + break; + } + } + + fsync(fileno(target)); + + fclose(source); + fclose(target); + + return ret; +} + +void handle_command(struct vehicle_command_s *cmd) +{ + /* result of the command */ + uint8_t result = VEHICLE_CMD_RESULT_UNSUPPORTED; + int param; + + /* request to set different system mode */ + switch (cmd->command) { + + case VEHICLE_CMD_PREFLIGHT_STORAGE: + param = (int)(cmd->param3); + + if (param == 1) { + sdlog2_start_log(); + + } else if (param == 0) { + sdlog2_stop_log(); + } + + break; + + default: + /* silently ignore */ + break; + } +} + +void handle_status(struct vehicle_status_s *status) +{ + if (status->flag_system_armed != flag_system_armed) { + flag_system_armed = status->flag_system_armed; + + if (flag_system_armed) { + sdlog2_start_log(); + + } else { + sdlog2_stop_log(); + } + } +} diff --git a/src/modules/sdlog2/sdlog2_format.h b/src/modules/sdlog2/sdlog2_format.h new file mode 100644 index 000000000..59b91d90d --- /dev/null +++ b/src/modules/sdlog2/sdlog2_format.h @@ -0,0 +1,98 @@ +/**************************************************************************** + * + * Copyright (c) 2013 PX4 Development Team. All rights reserved. + * Author: Anton Babushkin <rk3dov@gmail.com> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file sdlog2_format.h + * + * General log format structures and macro. + * + * @author Anton Babushkin <rk3dov@gmail.com> + */ + +/* +Format characters in the format string for binary log messages + b : int8_t + B : uint8_t + h : int16_t + H : uint16_t + i : int32_t + I : uint32_t + f : float + n : char[4] + N : char[16] + Z : char[64] + c : int16_t * 100 + C : uint16_t * 100 + e : int32_t * 100 + E : uint32_t * 100 + L : int32_t latitude/longitude + M : uint8_t flight mode + + q : int64_t + Q : uint64_t + */ + +#ifndef SDLOG2_FORMAT_H_ +#define SDLOG2_FORMAT_H_ + +#define LOG_PACKET_HEADER_LEN 3 +#define LOG_PACKET_HEADER uint8_t head1, head2, msg_type; +#define LOG_PACKET_HEADER_INIT(id) .head1 = HEAD_BYTE1, .head2 = HEAD_BYTE2, .msg_type = id + +// once the logging code is all converted we will remove these from +// this header +#define HEAD_BYTE1 0xA3 // Decimal 163 +#define HEAD_BYTE2 0x95 // Decimal 149 + +struct log_format_s { + uint8_t type; + uint8_t length; // full packet length including header + char name[4]; + char format[16]; + char labels[64]; +}; + +#define LOG_FORMAT(_name, _format, _labels) { \ + .type = LOG_##_name##_MSG, \ + .length = sizeof(struct log_##_name##_s) + LOG_PACKET_HEADER_LEN, \ + .name = #_name, \ + .format = _format, \ + .labels = _labels \ + } + +#define LOG_FORMAT_MSG 0x80 + +#define LOG_PACKET_SIZE(_name) LOG_PACKET_HEADER_LEN + sizeof(struct log_##_name##_s) + +#endif /* SDLOG2_FORMAT_H_ */ diff --git a/src/modules/sdlog2/sdlog2_messages.h b/src/modules/sdlog2/sdlog2_messages.h new file mode 100644 index 000000000..40763ee1e --- /dev/null +++ b/src/modules/sdlog2/sdlog2_messages.h @@ -0,0 +1,191 @@ +/**************************************************************************** + * + * Copyright (c) 2013 PX4 Development Team. All rights reserved. + * Author: Anton Babushkin <rk3dov@gmail.com> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file sdlog2_messages.h + * + * Log messages and structures definition. + * + * @author Anton Babushkin <rk3dov@gmail.com> + */ + +#ifndef SDLOG2_MESSAGES_H_ +#define SDLOG2_MESSAGES_H_ + +#include "sdlog2_format.h" + +/* define message formats */ + +#pragma pack(push, 1) +/* --- TIME - TIME STAMP --- */ +#define LOG_TIME_MSG 1 +struct log_TIME_s { + uint64_t t; +}; + +/* --- ATT - ATTITUDE --- */ +#define LOG_ATT_MSG 2 +struct log_ATT_s { + float roll; + float pitch; + float yaw; +}; + +/* --- ATSP - ATTITUDE SET POINT --- */ +#define LOG_ATSP_MSG 3 +struct log_ATSP_s { + float roll_sp; + float pitch_sp; + float yaw_sp; +}; + +/* --- IMU - IMU SENSORS --- */ +#define LOG_IMU_MSG 4 +struct log_IMU_s { + float acc_x; + float acc_y; + float acc_z; + float gyro_x; + float gyro_y; + float gyro_z; + float mag_x; + float mag_y; + float mag_z; +}; + +/* --- SENS - OTHER SENSORS --- */ +#define LOG_SENS_MSG 5 +struct log_SENS_s { + float baro_pres; + float baro_alt; + float baro_temp; + float diff_pres; +}; + +/* --- LPOS - LOCAL POSITION --- */ +#define LOG_LPOS_MSG 6 +struct log_LPOS_s { + float x; + float y; + float z; + float vx; + float vy; + float vz; + float hdg; + int32_t home_lat; + int32_t home_lon; + float home_alt; +}; + +/* --- LPSP - LOCAL POSITION SETPOINT --- */ +#define LOG_LPSP_MSG 7 +struct log_LPSP_s { + float x; + float y; + float z; + float yaw; +}; + +/* --- GPS - GPS POSITION --- */ +#define LOG_GPS_MSG 8 +struct log_GPS_s { + uint64_t gps_time; + uint8_t fix_type; + float eph; + float epv; + int32_t lat; + int32_t lon; + float alt; + float vel_n; + float vel_e; + float vel_d; + float cog; +}; + +/* --- ATTC - ATTITUDE CONTROLS (ACTUATOR_0 CONTROLS)--- */ +#define LOG_ATTC_MSG 9 +struct log_ATTC_s { + float roll; + float pitch; + float yaw; + float thrust; +}; + +/* --- STAT - VEHICLE STATE --- */ +#define LOG_STAT_MSG 10 +struct log_STAT_s { + unsigned char state; + unsigned char flight_mode; + unsigned char manual_control_mode; + unsigned char manual_sas_mode; + unsigned char armed; + float battery_voltage; + float battery_current; + float battery_remaining; + unsigned char battery_warning; +}; + +/* --- RC - RC INPUT CHANNELS --- */ +#define LOG_RC_MSG 11 +struct log_RC_s { + float channel[8]; +}; + +/* --- OUT0 - ACTUATOR_0 OUTPUT --- */ +#define LOG_OUT0_MSG 12 +struct log_OUT0_s { + float output[8]; +}; +#pragma pack(pop) + +/* construct list of all message formats */ + +static const struct log_format_s log_formats[] = { + LOG_FORMAT(TIME, "Q", "StartTime"), + LOG_FORMAT(ATT, "fff", "Roll,Pitch,Yaw"), + LOG_FORMAT(ATSP, "fff", "RollSP,PitchSP,YawSP"), + LOG_FORMAT(IMU, "fffffffff", "AccX,AccY,AccZ,GyroX,GyroY,GyroZ,MagX,MagY,MagZ"), + LOG_FORMAT(SENS, "ffff", "BaroPres,BaroAlt,BaroTemp,DiffPres"), + LOG_FORMAT(LPOS, "fffffffLLf", "X,Y,Z,VX,VY,VZ,Heading,HomeLat,HomeLon,HomeAlt"), + LOG_FORMAT(LPSP, "ffff", "X,Y,Z,Yaw"), + LOG_FORMAT(GPS, "QBffLLfffff", "GPSTime,FixType,EPH,EPV,Lat,Lon,Alt,VelN,VelE,VelD,Cog"), + LOG_FORMAT(ATTC, "ffff", "Roll,Pitch,Yaw,Thrust"), + LOG_FORMAT(STAT, "BBBBBfffB", "State,FlightMode,CtlMode,SASMode,Armed,BatV,BatC,BatRem,BatWarn"), + LOG_FORMAT(RC, "ffffffff", "Ch0,Ch1,Ch2,Ch3,Ch4,Ch5,Ch6,Ch7"), + LOG_FORMAT(OUT0, "ffffffff", "Out0,Out1,Out2,Out3,Out4,Out5,Out6,Out7"), +}; + +static const int log_formats_num = sizeof(log_formats) / sizeof(struct log_format_s); + +#endif /* SDLOG2_MESSAGES_H_ */ diff --git a/src/modules/systemlib/geo/geo.c b/src/modules/systemlib/geo/geo.c index 6746e8ff3..6463e6489 100644 --- a/src/modules/systemlib/geo/geo.c +++ b/src/modules/systemlib/geo/geo.c @@ -185,12 +185,11 @@ __EXPORT float get_distance_to_next_waypoint(double lat_now, double lon_now, dou double d_lat = lat_next_rad - lat_now_rad; double d_lon = lon_next_rad - lon_now_rad; - double a = sin(d_lat / 2.0d) * sin(d_lat / 2.0) + sin(d_lon / 2.0d) * sin(d_lon / 2.0d) * cos(lat_now_rad) * cos(lat_next_rad); + double a = sin(d_lat / 2.0d) * sin(d_lat / 2.0d) + sin(d_lon / 2.0d) * sin(d_lon / 2.0d) * cos(lat_now_rad) * cos(lat_next_rad); double c = 2.0d * atan2(sqrt(a), sqrt(1.0d - a)); const double radius_earth = 6371000.0d; - - return radius_earth * c; + return radius_earth * c; } __EXPORT float get_bearing_to_next_waypoint(double lat_now, double lon_now, double lat_next, double lon_next) diff --git a/src/modules/systemlib/geo/geo.h b/src/modules/systemlib/geo/geo.h index 0c0b5c533..84097b49f 100644 --- a/src/modules/systemlib/geo/geo.h +++ b/src/modules/systemlib/geo/geo.h @@ -82,8 +82,24 @@ __EXPORT void map_projection_project(double lat, double lon, float *x, float *y) */ __EXPORT void map_projection_reproject(float x, float y, double *lat, double *lon); +/** + * Returns the distance to the next waypoint in meters. + * + * @param lat_now current position in degrees (47.1234567°, not 471234567°) + * @param lon_now current position in degrees (8.1234567°, not 81234567°) + * @param lat_next next waypoint position in degrees (47.1234567°, not 471234567°) + * @param lon_next next waypoint position in degrees (8.1234567°, not 81234567°) + */ __EXPORT float get_distance_to_next_waypoint(double lat_now, double lon_now, double lat_next, double lon_next); +/** + * Returns the bearing to the next waypoint in radians. + * + * @param lat_now current position in degrees (47.1234567°, not 471234567°) + * @param lon_now current position in degrees (8.1234567°, not 81234567°) + * @param lat_next next waypoint position in degrees (47.1234567°, not 471234567°) + * @param lon_next next waypoint position in degrees (8.1234567°, not 81234567°) + */ __EXPORT float get_bearing_to_next_waypoint(double lat_now, double lon_now, double lat_next, double lon_next); __EXPORT int get_distance_to_line(struct crosstrack_error_s * crosstrack_error, double lat_now, double lon_now, double lat_start, double lon_start, double lat_end, double lon_end); diff --git a/src/systemcmds/mixer/mixer.c b/src/systemcmds/mixer/mixer.c index 55c4f0836..e642ed067 100644 --- a/src/systemcmds/mixer/mixer.c +++ b/src/systemcmds/mixer/mixer.c @@ -88,8 +88,8 @@ load(const char *devname, const char *fname) { int dev; FILE *fp; - char line[80]; - char buf[512]; + char line[120]; + char buf[2048]; /* open the device */ if ((dev = open(devname, 0)) < 0) diff --git a/src/systemcmds/pwm/pwm.c b/src/systemcmds/pwm/pwm.c index ff733df52..e150b5a74 100644 --- a/src/systemcmds/pwm/pwm.c +++ b/src/systemcmds/pwm/pwm.c @@ -185,12 +185,18 @@ pwm_main(int argc, char *argv[]) const char *arg = argv[0]; argv++; if (!strcmp(arg, "arm")) { + /* tell IO that its ok to disable its safety with the switch */ + ret = ioctl(fd, PWM_SERVO_SET_ARM_OK, 0); + if (ret != OK) + err(1, "PWM_SERVO_SET_ARM_OK"); + /* tell IO that the system is armed (it will output values if safety is off) */ ret = ioctl(fd, PWM_SERVO_ARM, 0); if (ret != OK) err(1, "PWM_SERVO_ARM"); continue; } if (!strcmp(arg, "disarm")) { + /* disarm, but do not revoke the SET_ARM_OK flag */ ret = ioctl(fd, PWM_SERVO_DISARM, 0); if (ret != OK) err(1, "PWM_SERVO_DISARM"); |