diff options
18 files changed, 780 insertions, 174 deletions
diff --git a/Tools/px4params/.gitignore b/Tools/px4params/.gitignore index 5d0378b4a..d78b71a6e 100644 --- a/Tools/px4params/.gitignore +++ b/Tools/px4params/.gitignore @@ -1,3 +1,4 @@ parameters.wiki parameters.xml +parameters.wikirpc.xml cookies.txt
\ No newline at end of file diff --git a/Tools/px4params/dokuwikiout.py b/Tools/px4params/dokuwikiout.py deleted file mode 100644 index c5cf65ea6..000000000 --- a/Tools/px4params/dokuwikiout.py +++ /dev/null @@ -1,62 +0,0 @@ -import output -from xml.sax.saxutils import escape - -class DokuWikiOutput(output.Output): - def Generate(self, groups): - pre_text = """<?xml version='1.0'?> - <methodCall> - <methodName>wiki.putPage</methodName> - <params> - <param> - <value> - <string>:firmware:parameters</string> - </value> - </param> - <param> - <value> - <string>""" - result = "====== Parameter Reference ======\nThis list is auto-generated every few minutes and contains the most recent parameter names and default values." - for group in groups: - result += "==== %s ====\n\n" % group.GetName() - result += "|< 100% 20% 20% 10% 10% 10% 30%>|\n" - result += "^ Name ^ Description ^ Min ^ Max ^ Default ^ Comment ^\n" - for param in group.GetParams(): - code = param.GetFieldValue("code") - name = param.GetFieldValue("short_desc") - name = name.replace("\n", "") - result += "| %s | %s " % (code, name) - min_val = param.GetFieldValue("min") - if min_val is not None: - result += " | %s " % min_val - else: - result += " | " - max_val = param.GetFieldValue("max") - if max_val is not None: - result += " | %s " % max_val - else: - result += " | " - def_val = param.GetFieldValue("default") - if def_val is not None: - result += "| %s " % def_val - else: - result += " | " - long_desc = param.GetFieldValue("long_desc") - if long_desc is not None: - long_desc = long_desc.replace("\n", "") - result += "| %s " % long_desc - else: - result += " | " - result += " |\n" - result += "\n" - post_text = """</string> - </value> - </param> - <param> - <value> - <name>sum</name> - <string>Updated parameters automagically from code.</string> - </value> - </param> - </params> - </methodCall>""" - return pre_text + escape(result) + post_text diff --git a/Tools/px4params/output.py b/Tools/px4params/output.py deleted file mode 100644 index c09246871..000000000 --- a/Tools/px4params/output.py +++ /dev/null @@ -1,5 +0,0 @@ -class Output(object): - def Save(self, groups, fn): - data = self.Generate(groups) - with open(fn, 'w') as f: - f.write(data) diff --git a/Tools/px4params/dokuwikiout_listings.py b/Tools/px4params/output_dokuwiki_listings.py index 33f76b415..83c50ae15 100644 --- a/Tools/px4params/dokuwikiout_listings.py +++ b/Tools/px4params/output_dokuwiki_listings.py @@ -1,7 +1,7 @@ -import output +import codecs -class DokuWikiOutput(output.Output): - def Generate(self, groups): +class DokuWikiListingsOutput(): + def __init__(self, groups): result = "" for group in groups: result += "==== %s ====\n\n" % group.GetName() @@ -24,4 +24,8 @@ class DokuWikiOutput(output.Output): if def_val is not None: result += "* Default value: %s\n" % def_val result += "\n" - return result + self.output = result + + def Save(self, filename): + with codecs.open(filename, 'w', 'utf-8') as f: + f.write(self.output) diff --git a/Tools/px4params/output_dokuwiki_tables.py b/Tools/px4params/output_dokuwiki_tables.py new file mode 100644 index 000000000..aa04304df --- /dev/null +++ b/Tools/px4params/output_dokuwiki_tables.py @@ -0,0 +1,76 @@ +from xml.sax.saxutils import escape +import codecs + +class DokuWikiTablesOutput(): + def __init__(self, groups): + result = "====== Parameter Reference ======\nThis list is auto-generated every few minutes and contains the most recent parameter names and default values.\n\n" + for group in groups: + result += "==== %s ====\n\n" % group.GetName() + result += "|< 100% 20% 20% 10% 10% 10% 30%>|\n" + result += "^ Name ^ Description ^ Min ^ Max ^ Default ^ Comment ^\n" + for param in group.GetParams(): + code = param.GetFieldValue("code") + name = param.GetFieldValue("short_desc") + min_val = param.GetFieldValue("min") + max_val = param.GetFieldValue("max") + def_val = param.GetFieldValue("default") + long_desc = param.GetFieldValue("long_desc") + + name = name.replace("\n", " ") + result += "| %s | %s |" % (code, name) + + if min_val is not None: + result += " %s |" % min_val + else: + result += " |" + + if max_val is not None: + result += " %s |" % max_val + else: + result += " |" + + if def_val is not None: + result += " %s |" % def_val + else: + result += " |" + + if long_desc is not None: + long_desc = long_desc.replace("\n", " ") + result += " %s |" % long_desc + else: + result += " |" + + result += "\n" + result += "\n" + self.output = result; + + def Save(self, filename): + with codecs.open(filename, 'w', 'utf-8') as f: + f.write(self.output) + + def SaveRpc(self, filename): + with codecs.open(filename, 'w', 'utf-8') as f: + f.write("""<?xml version='1.0'?> +<methodCall> + <methodName>wiki.putPage</methodName> + <params> + <param> + <value> + <string>:firmware:parameters</string> + </value> + </param> + <param> + <value> + <string>""") + f.write(escape(self.output)) + f.write("""</string> + </value> + </param> + <param> + <value> + <name>sum</name> + <string>Updated parameters automagically from code.</string> + </value> + </param> + </params> +</methodCall>""") diff --git a/Tools/px4params/xmlout.py b/Tools/px4params/output_xml.py index d56802b15..e845cd1b1 100644 --- a/Tools/px4params/xmlout.py +++ b/Tools/px4params/output_xml.py @@ -1,8 +1,8 @@ -import output from xml.dom.minidom import getDOMImplementation +import codecs -class XMLOutput(output.Output): - def Generate(self, groups): +class XMLOutput(): + def __init__(self, groups): impl = getDOMImplementation() xml_document = impl.createDocument(None, "parameters", None) xml_parameters = xml_document.documentElement @@ -19,4 +19,8 @@ class XMLOutput(output.Output): xml_param.appendChild(xml_field) xml_value = xml_document.createTextNode(value) xml_field.appendChild(xml_value) - return xml_document.toprettyxml(indent=" ", newl="\n", encoding="utf-8") + self.xml_document = xml_document + + def Save(self, filename): + with codecs.open(filename, 'w', 'utf-8') as f: + self.xml_document.writexml(f, indent=" ", addindent=" ", newl="\n") diff --git a/Tools/px4params/px_process_params.py b/Tools/px4params/px_process_params.py index cdf5aba7c..7799f6348 100755 --- a/Tools/px4params/px_process_params.py +++ b/Tools/px4params/px_process_params.py @@ -40,22 +40,28 @@ # import scanner -import parser -import xmlout -import dokuwikiout +import srcparser +import output_xml +import output_dokuwiki_tables +import output_dokuwiki_listings # Initialize parser -prs = parser.Parser() +prs = srcparser.Parser() # Scan directories, and parse the files sc = scanner.Scanner() sc.ScanDir("../../src", prs) -output = prs.GetParamGroups() +groups = prs.GetParamGroups() # Output into XML -out = xmlout.XMLOutput() -out.Save(output, "parameters.xml") +out = output_xml.XMLOutput(groups) +out.Save("parameters.xml") -# Output into DokuWiki -out = dokuwikiout.DokuWikiOutput() -out.Save(output, "parameters.wiki") +# Output to DokuWiki listings +#out = output_dokuwiki_listings.DokuWikiListingsOutput(groups) +#out.Save("parameters.wiki") + +# Output to DokuWiki tables +out = output_dokuwiki_tables.DokuWikiTablesOutput(groups) +out.Save("parameters.wiki") +out.SaveRpc("parameters.wikirpc.xml") diff --git a/Tools/px4params/scanner.py b/Tools/px4params/scanner.py index b5a1af47c..8779b7bbf 100644 --- a/Tools/px4params/scanner.py +++ b/Tools/px4params/scanner.py @@ -1,5 +1,6 @@ import os import re +import codecs class Scanner(object): """ @@ -29,6 +30,6 @@ class Scanner(object): Scans provided file and passes its contents to the parser using parser.Parse method. """ - with open(path, 'r') as f: + with codecs.open(path, 'r', 'utf-8') as f: contents = f.read() parser.Parse(contents) diff --git a/Tools/px4params/parser.py b/Tools/px4params/srcparser.py index 251be672f..1b2d30110 100644 --- a/Tools/px4params/parser.py +++ b/Tools/px4params/srcparser.py @@ -28,8 +28,7 @@ class ParameterGroup(object): state of the parser. """ return sorted(self.params, - cmp=lambda x, y: cmp(x.GetFieldValue("code"), - y.GetFieldValue("code"))) + key=lambda x: x.GetFieldValue("code")) class Parameter(object): """ @@ -61,9 +60,10 @@ class Parameter(object): """ Return list of existing field codes in convenient order """ - return sorted(self.fields.keys(), - cmp=lambda x, y: cmp(self.priority.get(y, 0), - self.priority.get(x, 0)) or cmp(x, y)) + keys = self.fields.keys() + keys = sorted(keys) + keys = sorted(keys, key=lambda x: self.priority.get(x, 0), reverse=True) + return keys def GetFieldValue(self, code): """ @@ -197,7 +197,7 @@ class Parser(object): if tag == "group": group = tags[tag] elif tag not in self.valid_tags: - sys.stderr.write("Skipping invalid" + sys.stderr.write("Skipping invalid " "documentation tag: '%s'\n" % tag) else: param.SetField(tag, tags[tag]) @@ -214,7 +214,7 @@ class Parser(object): object. Note that returned object is not a copy. Modifications affect state of the parser. """ - return sorted(self.param_groups.values(), - cmp=lambda x, y: cmp(self.priority.get(y.GetName(), 0), - self.priority.get(x.GetName(), 0)) or cmp(x.GetName(), - y.GetName())) + groups = self.param_groups.values() + groups = sorted(groups, key=lambda x: x.GetName()) + groups = sorted(groups, key=lambda x: self.priority.get(x.GetName(), 0), reverse=True) + return groups diff --git a/Tools/px4params/xmlrpc.sh b/Tools/px4params/xmlrpc.sh index 36c52ff71..efd177f46 100644 --- a/Tools/px4params/xmlrpc.sh +++ b/Tools/px4params/xmlrpc.sh @@ -2,4 +2,4 @@ python px_process_params.py rm cookies.txt curl --cookie cookies.txt --cookie-jar cookies.txt --user-agent Mozilla/4.0 --data "u=$XMLRPCUSER&p=$XMLRPCPASS" https://pixhawk.org/start?do=login -curl -k --cookie cookies.txt -H "Content-Type: application/xml" -X POST --data-binary @parameters.wiki "https://pixhawk.org/lib/exe/xmlrpc.php" +curl -k --cookie cookies.txt -H "Content-Type: application/xml" -X POST --data-binary @parameters.wikirpc.xml "https://pixhawk.org/lib/exe/xmlrpc.php" diff --git a/src/lib/launchdetection/launchdetection_params.c b/src/lib/launchdetection/launchdetection_params.c index 63a8981aa..45d7957f1 100644 --- a/src/lib/launchdetection/launchdetection_params.c +++ b/src/lib/launchdetection/launchdetection_params.c @@ -45,28 +45,46 @@ #include <systemlib/param/param.h> /* - * Launch detection parameters, accessible via MAVLink + * Catapult launch detection parameters, accessible via MAVLink * */ -/* Catapult Launch detection */ - -// @DisplayName Switch to enable launchdetection -// @Description if set to 1 launchdetection is enabled -// @Range 0 or 1 +/** + * Enable launch detection. + * + * @min 0 + * @max 1 + * @group Launch detection + */ PARAM_DEFINE_INT32(LAUN_ALL_ON, 0); -// @DisplayName Catapult Accelerometer Threshold -// @Description LAUN_CAT_A * LAUN_CAT_T serves as threshold to trigger launch detection -// @Range > 0 +/** + * Catapult accelerometer theshold. + * + * LAUN_CAT_A * LAUN_CAT_T serves as threshold to trigger launch detection. + * + * @min 0 + * @group Launch detection + */ PARAM_DEFINE_FLOAT(LAUN_CAT_A, 30.0f); -// @DisplayName Catapult Time Threshold -// @Description LAUN_CAT_A * LAUN_CAT_T serves as threshold to trigger launch detection -// @Range > 0, in seconds +/** + * Catapult time theshold. + * + * LAUN_CAT_A * LAUN_CAT_T serves as threshold to trigger launch detection. + * + * @min 0 + * @group Launch detection + */ PARAM_DEFINE_FLOAT(LAUN_CAT_T, 0.05f); -// @DisplayName Throttle setting while detecting the launch -// @Description The throttle is set to this value while the system is waiting for the takeoff -// @Range 0 to 1 +/** + * Throttle setting while detecting launch. + * + * The throttle is set to this value while the system is waiting for the take-off. + * + * @min 0 + * @max 1 + * @group Launch detection + */ PARAM_DEFINE_FLOAT(LAUN_THR_PRE, 0.0f); diff --git a/src/modules/commander/commander_params.c b/src/modules/commander/commander_params.c index d3155f7bf..80ca68f21 100644 --- a/src/modules/commander/commander_params.c +++ b/src/modules/commander/commander_params.c @@ -48,7 +48,39 @@ PARAM_DEFINE_FLOAT(TRIM_ROLL, 0.0f); PARAM_DEFINE_FLOAT(TRIM_PITCH, 0.0f); PARAM_DEFINE_FLOAT(TRIM_YAW, 0.0f); + +/** + * Empty cell voltage. + * + * Defines the voltage where a single cell of the battery is considered empty. + * + * @group Battery Calibration + */ PARAM_DEFINE_FLOAT(BAT_V_EMPTY, 3.4f); + +/** + * Full cell voltage. + * + * Defines the voltage where a single cell of the battery is considered full. + * + * @group Battery Calibration + */ PARAM_DEFINE_FLOAT(BAT_V_FULL, 3.9f); + +/** + * Number of cells. + * + * Defines the number of cells the attached battery consists of. + * + * @group Battery Calibration + */ PARAM_DEFINE_INT32(BAT_N_CELLS, 3); + +/** + * Battery capacity. + * + * Defines the capacity of the attached battery. + * + * @group Battery Calibration + */ PARAM_DEFINE_FLOAT(BAT_CAPACITY, -1.0f); diff --git a/src/modules/fw_pos_control_l1/fw_pos_control_l1_params.c b/src/modules/fw_pos_control_l1/fw_pos_control_l1_params.c index 512ca7b8a..62a340e90 100644 --- a/src/modules/fw_pos_control_l1/fw_pos_control_l1_params.c +++ b/src/modules/fw_pos_control_l1/fw_pos_control_l1_params.c @@ -40,12 +40,10 @@ */ #include <nuttx/config.h> - #include <systemlib/param/param.h> /* * Controller parameters, accessible via MAVLink - * */ /** @@ -119,58 +117,268 @@ PARAM_DEFINE_FLOAT(FW_P_LIM_MIN, -45.0f); */ PARAM_DEFINE_FLOAT(FW_P_LIM_MAX, 45.0f); - +/** + * Controller roll limit + * + * The maximum roll the controller will output. + * + * @unit degrees + * @min 0.0 + * @group L1 Control + */ PARAM_DEFINE_FLOAT(FW_R_LIM, 45.0f); +/** + * Throttle limit max + * + * This is the maximum throttle % that can be used by the controller. + * For overpowered aircraft, this should be reduced to a value that + * provides sufficient thrust to climb at the maximum pitch angle PTCH_MAX. + * + * @group L1 Control + */ +PARAM_DEFINE_FLOAT(FW_THR_MAX, 1.0f); +/** + * Throttle limit min + * + * This is the minimum throttle % that can be used by the controller. + * For electric aircraft this will normally be set to zero, but can be set + * to a small non-zero value if a folding prop is fitted to prevent the + * prop from folding and unfolding repeatedly in-flight or to provide + * some aerodynamic drag from a turning prop to improve the descent rate. + * + * For aircraft with internal combustion engine this parameter should be set + * for desired idle rpm. + * + * @group L1 Control + */ PARAM_DEFINE_FLOAT(FW_THR_MIN, 0.0f); - -PARAM_DEFINE_FLOAT(FW_THR_MAX, 1.0f); - +/** + * Throttle limit value before flare + * + * This throttle value will be set as throttle limit at FW_LND_TLALT, + * before arcraft will flare. + * + * @group L1 Control + */ PARAM_DEFINE_FLOAT(FW_THR_LND_MAX, 1.0f); +/** + * Maximum climb rate + * + * This is the best climb rate that the aircraft can achieve with + * the throttle set to THR_MAX and the airspeed set to the + * default value. For electric aircraft make sure this number can be + * achieved towards the end of flight when the battery voltage has reduced. + * The setting of this parameter can be checked by commanding a positive + * altitude change of 100m in loiter, RTL or guided mode. If the throttle + * required to climb is close to THR_MAX and the aircraft is maintaining + * airspeed, then this parameter is set correctly. If the airspeed starts + * to reduce, then the parameter is set to high, and if the throttle + * demand required to climb and maintain speed is noticeably less than + * FW_THR_MAX, then either FW_T_CLMB_MAX should be increased or + * FW_THR_MAX reduced. + * + * @group L1 Control + */ PARAM_DEFINE_FLOAT(FW_T_CLMB_MAX, 5.0f); - +/** + * Minimum descent rate + * + * This is the sink rate of the aircraft with the throttle + * set to THR_MIN and flown at the same airspeed as used + * to measure FW_T_CLMB_MAX. + * + * @group L1 Control + */ PARAM_DEFINE_FLOAT(FW_T_SINK_MIN, 2.0f); +/** + * Maximum descent rate + * + * This sets the maximum descent rate that the controller will use. + * If this value is too large, the aircraft can over-speed on descent. + * This should be set to a value that can be achieved without + * exceeding the lower pitch angle limit and without over-speeding + * the aircraft. + * + * @group L1 Control + */ +PARAM_DEFINE_FLOAT(FW_T_SINK_MAX, 5.0f); +/** + * TECS time constant + * + * This is the time constant of the TECS control algorithm (in seconds). + * Smaller values make it faster to respond, larger values make it slower + * to respond. + * + * @group L1 Control + */ PARAM_DEFINE_FLOAT(FW_T_TIME_CONST, 5.0f); - +/** + * Throttle damping factor + * + * This is the damping gain for the throttle demand loop. + * Increase to add damping to correct for oscillations in speed and height. + * + * @group L1 Control + */ PARAM_DEFINE_FLOAT(FW_T_THR_DAMP, 0.5f); - +/** + * Integrator gain + * + * This is the integrator gain on the control loop. + * Increasing this gain increases the speed at which speed + * and height offsets are trimmed out, but reduces damping and + * increases overshoot. + * + * @group L1 Control + */ PARAM_DEFINE_FLOAT(FW_T_INTEG_GAIN, 0.1f); - +/** + * Maximum vertical acceleration + * + * This is the maximum vertical acceleration (in metres/second^2) + * either up or down that the controller will use to correct speed + * or height errors. The default value of 7 m/s/s (equivalent to +- 0.7 g) + * allows for reasonably aggressive pitch changes if required to recover + * from under-speed conditions. + * + * @group L1 Control + */ PARAM_DEFINE_FLOAT(FW_T_VERT_ACC, 7.0f); - +/** + * Complementary filter "omega" parameter for height + * + * This is the cross-over frequency (in radians/second) of the complementary + * filter used to fuse vertical acceleration and barometric height to obtain + * an estimate of height rate and height. Increasing this frequency weights + * the solution more towards use of the barometer, whilst reducing it weights + * the solution more towards use of the accelerometer data. + * + * @group L1 Control + */ PARAM_DEFINE_FLOAT(FW_T_HGT_OMEGA, 3.0f); - +/** + * Complementary filter "omega" parameter for speed + * + * This is the cross-over frequency (in radians/second) of the complementary + * filter used to fuse longitudinal acceleration and airspeed to obtain an + * improved airspeed estimate. Increasing this frequency weights the solution + * more towards use of the arispeed sensor, whilst reducing it weights the + * solution more towards use of the accelerometer data. + * + * @group L1 Control + */ PARAM_DEFINE_FLOAT(FW_T_SPD_OMEGA, 2.0f); - +/** + * Roll -> Throttle feedforward + * + * Increasing this gain turn increases the amount of throttle that will + * be used to compensate for the additional drag created by turning. + * Ideally this should be set to approximately 10 x the extra sink rate + * in m/s created by a 45 degree bank turn. Increase this gain if + * the aircraft initially loses energy in turns and reduce if the + * aircraft initially gains energy in turns. Efficient high aspect-ratio + * aircraft (eg powered sailplanes) can use a lower value, whereas + * inefficient low aspect-ratio models (eg delta wings) can use a higher value. + * + * @group L1 Control + */ PARAM_DEFINE_FLOAT(FW_T_RLL2THR, 10.0f); - +/** + * Speed <--> Altitude priority + * + * This parameter adjusts the amount of weighting that the pitch control + * applies to speed vs height errors. Setting it to 0.0 will cause the + * pitch control to control height and ignore speed errors. This will + * normally improve height accuracy but give larger airspeed errors. + * Setting it to 2.0 will cause the pitch control loop to control speed + * and ignore height errors. This will normally reduce airspeed errors, + * but give larger height errors. The default value of 1.0 allows the pitch + * control to simultaneously control height and speed. + * Note to Glider Pilots - set this parameter to 2.0 (The glider will + * adjust its pitch angle to maintain airspeed, ignoring changes in height). + * + * @group L1 Control + */ PARAM_DEFINE_FLOAT(FW_T_SPDWEIGHT, 1.0f); - +/** + * Pitch damping factor + * + * This is the damping gain for the pitch demand loop. Increase to add + * damping to correct for oscillations in height. The default value of 0.0 + * will work well provided the pitch to servo controller has been tuned + * properly. + * + * @group L1 Control + */ PARAM_DEFINE_FLOAT(FW_T_PTCH_DAMP, 0.0f); - -PARAM_DEFINE_FLOAT(FW_T_SINK_MAX, 5.0f); - +/** + * Height rate P factor + * + * @group L1 Control + */ PARAM_DEFINE_FLOAT(FW_T_HRATE_P, 0.05f); + +/** + * Speed rate P factor + * + * @group L1 Control + */ PARAM_DEFINE_FLOAT(FW_T_SRATE_P, 0.05f); +/** + * Landing slope angle + * + * @group L1 Control + */ PARAM_DEFINE_FLOAT(FW_LND_ANG, 5.0f); + +/** + * Landing slope length + * + * @group L1 Control + */ PARAM_DEFINE_FLOAT(FW_LND_SLLR, 0.9f); + +/** + * + * + * @group L1 Control + */ PARAM_DEFINE_FLOAT(FW_LND_HVIRT, 10.0f); + +/** + * Landing flare altitude (relative) + * + * @group L1 Control + */ PARAM_DEFINE_FLOAT(FW_LND_FLALT, 15.0f); + +/** + * Landing throttle limit altitude (relative) + * + * @group L1 Control + */ PARAM_DEFINE_FLOAT(FW_LND_TLALT, 5.0f); + +/** + * Landing heading hold horizontal distance + * + * @group L1 Control + */ PARAM_DEFINE_FLOAT(FW_LND_HHDIST, 15.0f); diff --git a/src/modules/mavlink/mavlink.c b/src/modules/mavlink/mavlink.c index 4d975066f..ade4469c5 100644 --- a/src/modules/mavlink/mavlink.c +++ b/src/modules/mavlink/mavlink.c @@ -76,8 +76,20 @@ #include <uORB/topics/mission_result.h> /* define MAVLink specific parameters */ +/** + * MAVLink system ID + * @group MAVLink + */ PARAM_DEFINE_INT32(MAV_SYS_ID, 1); +/** + * MAVLink component ID + * @group MAVLink + */ PARAM_DEFINE_INT32(MAV_COMP_ID, 50); +/** + * MAVLink type + * @group MAVLink + */ PARAM_DEFINE_INT32(MAV_TYPE, MAV_TYPE_FIXED_WING); __EXPORT int mavlink_main(int argc, char *argv[]); diff --git a/src/modules/navigator/geofence_params.c b/src/modules/navigator/geofence_params.c index 20dd1fe2f..5831a0ca9 100644 --- a/src/modules/navigator/geofence_params.c +++ b/src/modules/navigator/geofence_params.c @@ -45,11 +45,17 @@ #include <systemlib/param/param.h> /* - * geofence parameters, accessible via MAVLink - * + * Geofence parameters, accessible via MAVLink */ -// @DisplayName Switch to enable geofence -// @Description if set to 1 geofence is enabled, defaults to 1 because geofence is only enabled when the geofence.txt file is present -// @Range 0 or 1 +/** + * Enable geofence. + * + * Set to 1 to enable geofence. + * Defaults to 1 because geofence is only enabled when the geofence.txt file is present. + * + * @min 0 + * @max 1 + * @group Geofence + */ PARAM_DEFINE_INT32(GF_ON, 1); diff --git a/src/modules/navigator/navigator_params.c b/src/modules/navigator/navigator_params.c index 9e05bbffa..ec7a4e229 100644 --- a/src/modules/navigator/navigator_params.c +++ b/src/modules/navigator/navigator_params.c @@ -50,15 +50,72 @@ /* * Navigator parameters, accessible via MAVLink - * */ +/** + * Minimum altitude + * + * @group Navigation + */ PARAM_DEFINE_FLOAT(NAV_MIN_ALT, 50.0f); + +/** + * Waypoint acceptance radius. + * + * @group Navigation + */ PARAM_DEFINE_FLOAT(NAV_ACCEPT_RAD, 10.0f); + +/** + * Loiter radius. + * + * @group Navigation + */ PARAM_DEFINE_FLOAT(NAV_LOITER_RAD, 50.0f); + +/** + * @group Navigation + */ PARAM_DEFINE_INT32(NAV_ONB_MIS_EN, 0); + +/** + * Default take-off altitude. + * + * @group Navigation + */ PARAM_DEFINE_FLOAT(NAV_TAKEOFF_ALT, 10.0f); // default TAKEOFF altitude + +/** + * Landing altitude. + * + * Slowly descend from this altitude when landing. + * + * @group Navigation + */ PARAM_DEFINE_FLOAT(NAV_LAND_ALT, 5.0f); // slow descend from this altitude when landing + +/** + * Return-to-land altitude. + * + * Minimum altitude for going home in RTL mode. + * + * @group Navigation + */ PARAM_DEFINE_FLOAT(NAV_RTL_ALT, 30.0f); // min altitude for going home in RTL mode -PARAM_DEFINE_FLOAT(NAV_RTL_LAND_T, -1.0f); // delay after descend before landing, if set to -1 the system will not land but loiter at NAV_LAND_ALT -PARAM_DEFINE_INT32(NAV_PARACHUTE_EN, 0); // enable parachute deployment + +/** + * Return-to-land delay. + * + * Delay after descend before landing. + * If set to -1 the system will not land but loiter at NAV_LAND_ALT. + * + * @group Navigation + */ +PARAM_DEFINE_FLOAT(NAV_RTL_LAND_T, -1.0f); + +/** + * Enable parachute deployment. + * + * @group Navigation + */ +PARAM_DEFINE_INT32(NAV_PARACHUTE_EN, 0); diff --git a/src/modules/sensors/sensor_params.c b/src/modules/sensors/sensor_params.c index 30659fd3a..288c6e00a 100644 --- a/src/modules/sensors/sensor_params.c +++ b/src/modules/sensors/sensor_params.c @@ -42,13 +42,10 @@ */ #include <nuttx/config.h> - #include <systemlib/param/param.h> /** - * Gyro X offset - * - * This is an X-axis offset for the gyro. Adjust it according to the calibration data. + * Gyro X-axis offset * * @min -10.0 * @max 10.0 @@ -57,7 +54,7 @@ PARAM_DEFINE_FLOAT(SENS_GYRO_XOFF, 0.0f); /** - * Gyro Y offset + * Gyro Y-axis offset * * @min -10.0 * @max 10.0 @@ -66,7 +63,7 @@ PARAM_DEFINE_FLOAT(SENS_GYRO_XOFF, 0.0f); PARAM_DEFINE_FLOAT(SENS_GYRO_YOFF, 0.0f); /** - * Gyro Z offset + * Gyro Z-axis offset * * @min -5.0 * @max 5.0 @@ -75,9 +72,7 @@ PARAM_DEFINE_FLOAT(SENS_GYRO_YOFF, 0.0f); PARAM_DEFINE_FLOAT(SENS_GYRO_ZOFF, 0.0f); /** - * Gyro X scaling - * - * X-axis scaling. + * Gyro X-axis scaling factor * * @min -1.5 * @max 1.5 @@ -86,9 +81,7 @@ PARAM_DEFINE_FLOAT(SENS_GYRO_ZOFF, 0.0f); PARAM_DEFINE_FLOAT(SENS_GYRO_XSCALE, 1.0f); /** - * Gyro Y scaling - * - * Y-axis scaling. + * Gyro Y-axis scaling factor * * @min -1.5 * @max 1.5 @@ -97,9 +90,7 @@ PARAM_DEFINE_FLOAT(SENS_GYRO_XSCALE, 1.0f); PARAM_DEFINE_FLOAT(SENS_GYRO_YSCALE, 1.0f); /** - * Gyro Z scaling - * - * Z-axis scaling. + * Gyro Z-axis scaling factor * * @min -1.5 * @max 1.5 @@ -107,10 +98,9 @@ PARAM_DEFINE_FLOAT(SENS_GYRO_YSCALE, 1.0f); */ PARAM_DEFINE_FLOAT(SENS_GYRO_ZSCALE, 1.0f); + /** - * Magnetometer X offset - * - * This is an X-axis offset for the magnetometer. + * Magnetometer X-axis offset * * @min -500.0 * @max 500.0 @@ -119,9 +109,7 @@ PARAM_DEFINE_FLOAT(SENS_GYRO_ZSCALE, 1.0f); PARAM_DEFINE_FLOAT(SENS_MAG_XOFF, 0.0f); /** - * Magnetometer Y offset - * - * This is an Y-axis offset for the magnetometer. + * Magnetometer Y-axis offset * * @min -500.0 * @max 500.0 @@ -130,9 +118,7 @@ PARAM_DEFINE_FLOAT(SENS_MAG_XOFF, 0.0f); PARAM_DEFINE_FLOAT(SENS_MAG_YOFF, 0.0f); /** - * Magnetometer Z offset - * - * This is an Z-axis offset for the magnetometer. + * Magnetometer Z-axis offset * * @min -500.0 * @max 500.0 @@ -140,24 +126,134 @@ PARAM_DEFINE_FLOAT(SENS_MAG_YOFF, 0.0f); */ PARAM_DEFINE_FLOAT(SENS_MAG_ZOFF, 0.0f); +/** + * Magnetometer X-axis scaling factor + * + * @group Sensor Calibration + */ PARAM_DEFINE_FLOAT(SENS_MAG_XSCALE, 1.0f); + +/** + * Magnetometer Y-axis scaling factor + * + * @group Sensor Calibration + */ PARAM_DEFINE_FLOAT(SENS_MAG_YSCALE, 1.0f); + +/** + * Magnetometer Z-axis scaling factor + * + * @group Sensor Calibration + */ PARAM_DEFINE_FLOAT(SENS_MAG_ZSCALE, 1.0f); + +/** + * Accelerometer X-axis offset + * + * @group Sensor Calibration + */ PARAM_DEFINE_FLOAT(SENS_ACC_XOFF, 0.0f); + +/** + * Accelerometer Y-axis offset + * + * @group Sensor Calibration + */ PARAM_DEFINE_FLOAT(SENS_ACC_YOFF, 0.0f); + +/** + * Accelerometer Z-axis offset + * + * @group Sensor Calibration + */ PARAM_DEFINE_FLOAT(SENS_ACC_ZOFF, 0.0f); +/** + * Accelerometer X-axis scaling factor + * + * @group Sensor Calibration + */ PARAM_DEFINE_FLOAT(SENS_ACC_XSCALE, 1.0f); + +/** + * Accelerometer Y-axis scaling factor + * + * @group Sensor Calibration + */ PARAM_DEFINE_FLOAT(SENS_ACC_YSCALE, 1.0f); + +/** + * Accelerometer Z-axis scaling factor + * + * @group Sensor Calibration + */ PARAM_DEFINE_FLOAT(SENS_ACC_ZSCALE, 1.0f); + +/** + * Differential pressure sensor offset + * + * @group Sensor Calibration + */ PARAM_DEFINE_FLOAT(SENS_DPRES_OFF, 0.0f); + +/** + * Differential pressure sensor analog enabled + * + * @group Sensor Calibration + */ PARAM_DEFINE_INT32(SENS_DPRES_ANA, 0); + +/** + * Board rotation + * + * This parameter defines the rotation of the FMU board relative to the platform. + * Possible values are: + * 0 = No rotation + * 1 = Yaw 45° + * 2 = Yaw 90° + * 3 = Yaw 135° + * 4 = Yaw 180° + * 5 = Yaw 225° + * 6 = Yaw 270° + * 7 = Yaw 315° + * 8 = Roll 180° + * 9 = Roll 180°, Yaw 45° + * 10 = Roll 180°, Yaw 90° + * 11 = Roll 180°, Yaw 135° + * 12 = Pitch 180° + * 13 = Roll 180°, Yaw 225° + * 14 = Roll 180°, Yaw 270° + * 15 = Roll 180°, Yaw 315° + * 16 = Roll 90° + * 17 = Roll 90°, Yaw 45° + * 18 = Roll 90°, Yaw 90° + * 19 = Roll 90°, Yaw 135° + * 20 = Roll 270° + * 21 = Roll 270°, Yaw 45° + * 22 = Roll 270°, Yaw 90° + * 23 = Roll 270°, Yaw 135° + * 24 = Pitch 90° + * 25 = Pitch 270° + * + * @group Sensor Calibration + */ PARAM_DEFINE_INT32(SENS_BOARD_ROT, 0); + +/** + * External magnetometer rotation + * + * This parameter defines the rotation of the external magnetometer relative + * to the platform (not relative to the FMU). + * See SENS_BOARD_ROT for possible values. + * + * @group Sensor Calibration + */ PARAM_DEFINE_INT32(SENS_EXT_MAG_ROT, 0); + /** * RC Channel 1 Minimum * @@ -367,20 +463,52 @@ PARAM_DEFINE_FLOAT(RC18_DZ, 0.0f); #ifdef CONFIG_ARCH_BOARD_PX4FMU_V1 PARAM_DEFINE_INT32(RC_RL1_DSM_VCC, 0); /* Relay 1 controls DSM VCC */ #endif -PARAM_DEFINE_INT32(RC_DSM_BIND, -1); /* -1 = Idle, 0 = Start DSM2 bind, 1 = Start DSMX bind */ +/** + * DSM binding trigger. + * + * -1 = Idle, 0 = Start DSM2 bind, 1 = Start DSMX bind + * + * @group Radio Calibration + */ +PARAM_DEFINE_INT32(RC_DSM_BIND, -1); + + +/** + * Scaling factor for battery voltage sensor on PX4IO. + * + * @group Battery Calibration + */ PARAM_DEFINE_INT32(BAT_V_SCALE_IO, 10000); + #ifdef CONFIG_ARCH_BOARD_PX4FMU_V2 +/** + * Scaling factor for battery voltage sensor on FMU v2. + * + * @group Battery Calibration + */ PARAM_DEFINE_FLOAT(BAT_V_SCALING, 0.0082f); #else -/* default is conversion factor for the PX4IO / PX4IOAR board, the factor for PX4FMU standalone is different */ -/* PX4IOAR: 0.00838095238 */ -/* FMU standalone: 1/(10 / (47+10)) * (3.3 / 4095) = 0.00459340659 */ -/* FMU with PX4IOAR: (3.3f * 52.0f / 5.0f / 4095.0f) */ +/** + * Scaling factor for battery voltage sensor on FMU v1. + * + * FMUv1 standalone: 1/(10 / (47+10)) * (3.3 / 4095) = 0.00459340659 + * FMUv1 with PX4IO: 0.00459340659 + * FMUv1 with PX4IOAR: (3.3f * 52.0f / 5.0f / 4095.0f) = 0.00838095238 + * + * @group Battery Calibration + */ PARAM_DEFINE_FLOAT(BAT_V_SCALING, 0.00459340659f); #endif + +/** + * Scaling factor for battery current sensor. + * + * @group Battery Calibration + */ PARAM_DEFINE_FLOAT(BAT_C_SCALING, 0.0124); /* scaling for 3DR power brick */ + /** * Roll control channel mapping. * @@ -446,22 +574,127 @@ PARAM_DEFINE_INT32(RC_MAP_YAW, 4); * @group Radio Calibration */ PARAM_DEFINE_INT32(RC_MAP_MODE_SW, 0); + +/** + * Return switch channel mapping. + * + * @min 0 + * @max 18 + * @group Radio Calibration + */ PARAM_DEFINE_INT32(RC_MAP_RETURN_SW, 0); + +/** + * Assist switch channel mapping. + * + * @min 0 + * @max 18 + * @group Radio Calibration + */ PARAM_DEFINE_INT32(RC_MAP_ASSIST_SW, 0); + +/** + * Mission switch channel mapping. + * + * @min 0 + * @max 18 + * @group Radio Calibration + */ PARAM_DEFINE_INT32(RC_MAP_MISSIO_SW, 0); //PARAM_DEFINE_INT32(RC_MAP_OFFB_SW, 0); +/** + * Flaps channel mapping. + * + * @min 0 + * @max 18 + * @group Radio Calibration + */ PARAM_DEFINE_INT32(RC_MAP_FLAPS, 0); -PARAM_DEFINE_INT32(RC_MAP_AUX1, 0); /**< default function: camera pitch */ +/** + * Auxiliary switch 1 channel mapping. + * + * Default function: Camera pitch + * + * @min 0 + * @max 18 + * @group Radio Calibration + */ +PARAM_DEFINE_INT32(RC_MAP_AUX1, 0); + +/** + * Auxiliary switch 2 channel mapping. + * + * Default function: Camera roll + * + * @min 0 + * @max 18 + * @group Radio Calibration + */ PARAM_DEFINE_INT32(RC_MAP_AUX2, 0); /**< default function: camera roll */ -PARAM_DEFINE_INT32(RC_MAP_AUX3, 0); /**< default function: camera azimuth / yaw */ +/** + * Auxiliary switch 3 channel mapping. + * + * Default function: Camera azimuth / yaw + * + * @min 0 + * @max 18 + * @group Radio Calibration + */ +PARAM_DEFINE_INT32(RC_MAP_AUX3, 0); + + +/** + * Roll scaling factor + * + * @group Radio Calibration + */ PARAM_DEFINE_FLOAT(RC_SCALE_ROLL, 0.6f); + +/** + * Pitch scaling factor + * + * @group Radio Calibration + */ PARAM_DEFINE_FLOAT(RC_SCALE_PITCH, 0.6f); + +/** + * Yaw scaling factor + * + * @group Radio Calibration + */ PARAM_DEFINE_FLOAT(RC_SCALE_YAW, 2.0f); -PARAM_DEFINE_INT32(RC_FS_CH, 0); /**< RC failsafe channel, 0 = disable */ -PARAM_DEFINE_INT32(RC_FS_MODE, 0); /**< RC failsafe mode: 0 = too low means signal loss, 1 = too high means signal loss */ -PARAM_DEFINE_FLOAT(RC_FS_THR, 800); /**< RC failsafe PWM threshold */ + +/** + * Failsafe channel mapping. + * + * @min 0 + * @max 18 + * @group Radio Calibration + */ +PARAM_DEFINE_INT32(RC_FS_CH, 0); + +/** + * Failsafe channel mode. + * + * 0 = too low means signal loss, + * 1 = too high means signal loss + * + * @min 0 + * @max 1 + * @group Radio Calibration + */ +PARAM_DEFINE_INT32(RC_FS_MODE, 0); + +/** + * Failsafe channel PWM threshold. + * + * @min 0 + * @max 1 + * @group Radio Calibration + */ +PARAM_DEFINE_FLOAT(RC_FS_THR, 800); diff --git a/src/modules/systemlib/system_params.c b/src/modules/systemlib/system_params.c index 75be090f8..cb35a2541 100644 --- a/src/modules/systemlib/system_params.c +++ b/src/modules/systemlib/system_params.c @@ -40,8 +40,23 @@ #include <nuttx/config.h> #include <systemlib/param/param.h> -// Auto-start script with index #n +/** + * Auto-start script index. + * + * Defines the auto-start script used to bootstrap the system. + * + * @group System + */ PARAM_DEFINE_INT32(SYS_AUTOSTART, 0); -// Automatically configure default values +/** + * Automatically configure default values. + * + * Set to 1 to set platform-specific parameters to their default + * values on next system startup. + * + * @min 0 + * @max 1 + * @group System + */ PARAM_DEFINE_INT32(SYS_AUTOCONFIG, 0); |