diff options
221 files changed, 10714 insertions, 216 deletions
diff --git a/ROMFS/px4fmu_common/init.d/11001_hexa_cox b/ROMFS/px4fmu_common/init.d/11001_hexa_cox index 38e65435b..df2e609bc 100644 --- a/ROMFS/px4fmu_common/init.d/11001_hexa_cox +++ b/ROMFS/px4fmu_common/init.d/11001_hexa_cox @@ -9,7 +9,7 @@ sh /etc/init.d/rc.mc_defaults -set MIXER hexa_cox +set MIXER FMU_hexa_cox # We only can run one channel group with one rate, so set all 8 channels set PWM_OUTPUTS 12345678 diff --git a/ROMFS/px4fmu_common/init.d/12001_octo_cox b/ROMFS/px4fmu_common/init.d/12001_octo_cox index 99f902a6d..8703f5f2f 100644 --- a/ROMFS/px4fmu_common/init.d/12001_octo_cox +++ b/ROMFS/px4fmu_common/init.d/12001_octo_cox @@ -7,6 +7,6 @@ sh /etc/init.d/rc.mc_defaults -set MIXER octo_cox +set MIXER FMU_octo_cox set PWM_OUTPUTS 12345678 diff --git a/ROMFS/px4fmu_common/init.d/rcS b/ROMFS/px4fmu_common/init.d/rcS index 503dbb83e..2ab1e2e96 100644 --- a/ROMFS/px4fmu_common/init.d/rcS +++ b/ROMFS/px4fmu_common/init.d/rcS @@ -294,6 +294,7 @@ then tone_alarm $TUNE_OUT_ERROR fi fi + if [ $OUTPUT_MODE == fmu -o $OUTPUT_MODE == ardrone ] then echo "[init] Use FMU as primary output" @@ -317,6 +318,7 @@ then fi fi fi + if [ $OUTPUT_MODE == mkblctrl ] then echo "[init] Use MKBLCTRL as primary output" @@ -338,7 +340,8 @@ then tone_alarm $TUNE_OUT_ERROR fi - fi + fi + if [ $OUTPUT_MODE == hil ] then echo "[init] Use HIL as primary output" @@ -396,34 +399,29 @@ then # # MAVLink # - if [ $MAVLINK_FLAGS == default ] then if [ $HIL == yes ] then sleep 1 set MAVLINK_FLAGS "-r 10000 -d /dev/ttyACM0" - usleep 5000 else # Normal mode, use baudrate 57600 (default) and data rate 1000 bytes/s if [ $TTYS1_BUSY == yes ] then # Start MAVLink on ttyS0, because FMU ttyS1 pins configured as something else set MAVLINK_FLAGS "-r 1000 -d /dev/ttyS0" - usleep 5000 # Exit from nsh to free port for mavlink set EXIT_ON_END yes else # Start MAVLink on default port: ttyS1 set MAVLINK_FLAGS "-r 1000" - usleep 5000 fi fi fi mavlink start $MAVLINK_FLAGS - usleep 5000 # # Start the datamanager @@ -516,7 +514,7 @@ then then set MAV_TYPE 13 fi - if [ $MIXER == hexa_cox ] + if [ $MIXER == FMU_hexa_cox ] then set MAV_TYPE 13 fi diff --git a/ROMFS/px4fmu_common/mixers/hexa_cox.mix b/ROMFS/px4fmu_common/mixers/FMU_hexa_cox.mix index 497786feb..497786feb 100644 --- a/ROMFS/px4fmu_common/mixers/hexa_cox.mix +++ b/ROMFS/px4fmu_common/mixers/FMU_hexa_cox.mix diff --git a/mavlink/include/mavlink/v1.0/ardupilotmega/ardupilotmega.h b/mavlink/include/mavlink/v1.0/ardupilotmega/ardupilotmega.h index 2acb7965c..c887dc68a 100644 --- a/mavlink/include/mavlink/v1.0/ardupilotmega/ardupilotmega.h +++ b/mavlink/include/mavlink/v1.0/ardupilotmega/ardupilotmega.h @@ -12,15 +12,15 @@ extern "C" { // MESSAGE LENGTHS AND CRCS #ifndef MAVLINK_MESSAGE_LENGTHS -#define MAVLINK_MESSAGE_LENGTHS {9, 31, 12, 0, 14, 28, 3, 32, 0, 0, 0, 6, 0, 0, 0, 0, 0, 0, 0, 0, 20, 2, 25, 23, 30, 101, 22, 26, 16, 14, 28, 32, 28, 28, 22, 22, 21, 6, 6, 37, 4, 4, 2, 2, 4, 2, 2, 3, 13, 12, 19, 17, 15, 15, 27, 25, 18, 18, 20, 20, 9, 34, 26, 46, 36, 0, 6, 4, 0, 11, 18, 0, 0, 0, 20, 0, 33, 3, 0, 0, 20, 22, 0, 0, 0, 0, 0, 0, 0, 28, 56, 42, 33, 0, 0, 0, 0, 0, 0, 0, 26, 32, 32, 20, 32, 62, 54, 64, 84, 9, 254, 249, 9, 36, 26, 64, 22, 6, 14, 12, 97, 2, 2, 113, 35, 0, 0, 0, 0, 0, 13, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 24, 33, 25, 42, 8, 4, 12, 15, 13, 6, 15, 14, 0, 12, 3, 8, 28, 44, 3, 9, 22, 12, 18, 34, 66, 98, 8, 48, 19, 3, 0, 24, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 36, 30, 18, 18, 51, 9, 0} +#define MAVLINK_MESSAGE_LENGTHS {9, 31, 12, 0, 14, 28, 3, 32, 0, 0, 0, 6, 0, 0, 0, 0, 0, 0, 0, 0, 20, 2, 25, 23, 30, 101, 22, 26, 16, 14, 28, 32, 28, 28, 22, 22, 21, 6, 6, 37, 4, 4, 2, 2, 4, 2, 2, 3, 13, 12, 19, 17, 15, 15, 27, 25, 18, 18, 20, 20, 9, 34, 26, 46, 36, 42, 6, 4, 0, 11, 18, 0, 0, 0, 20, 0, 33, 3, 0, 0, 20, 22, 0, 0, 0, 0, 0, 0, 0, 28, 56, 42, 33, 0, 0, 0, 0, 0, 0, 0, 26, 32, 32, 20, 32, 62, 54, 64, 84, 9, 254, 249, 9, 36, 26, 64, 22, 6, 14, 12, 97, 2, 2, 113, 35, 6, 79, 0, 0, 0, 13, 255, 14, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 24, 33, 25, 42, 8, 4, 12, 15, 13, 6, 15, 14, 0, 12, 3, 8, 28, 44, 3, 9, 22, 12, 18, 34, 66, 98, 8, 48, 19, 3, 20, 24, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 36, 30, 18, 18, 51, 9, 0} #endif #ifndef MAVLINK_MESSAGE_CRCS -#define MAVLINK_MESSAGE_CRCS {50, 124, 137, 0, 237, 217, 104, 119, 0, 0, 0, 89, 0, 0, 0, 0, 0, 0, 0, 0, 214, 159, 220, 168, 24, 23, 170, 144, 67, 115, 39, 246, 185, 104, 237, 244, 222, 212, 9, 254, 230, 28, 28, 132, 221, 232, 11, 153, 41, 39, 214, 223, 141, 33, 15, 3, 100, 24, 239, 238, 30, 240, 183, 130, 130, 0, 148, 21, 0, 243, 124, 0, 0, 0, 20, 0, 152, 143, 0, 0, 127, 106, 0, 0, 0, 0, 0, 0, 0, 231, 183, 63, 54, 0, 0, 0, 0, 0, 0, 0, 175, 102, 158, 208, 56, 93, 211, 108, 32, 185, 235, 93, 124, 124, 119, 4, 76, 128, 56, 116, 134, 237, 203, 250, 87, 0, 0, 0, 0, 0, 29, 223, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 177, 241, 15, 134, 219, 208, 188, 84, 22, 19, 21, 134, 0, 78, 68, 189, 127, 154, 21, 21, 144, 1, 234, 73, 181, 22, 83, 167, 138, 234, 0, 47, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 204, 49, 170, 44, 83, 46, 0} +#define MAVLINK_MESSAGE_CRCS {50, 124, 137, 0, 237, 217, 104, 119, 0, 0, 0, 89, 0, 0, 0, 0, 0, 0, 0, 0, 214, 159, 220, 168, 24, 23, 170, 144, 67, 115, 39, 246, 185, 104, 237, 244, 222, 212, 9, 254, 230, 28, 28, 132, 221, 232, 11, 153, 41, 39, 214, 223, 141, 33, 15, 3, 100, 24, 239, 238, 30, 240, 183, 130, 130, 118, 148, 21, 0, 243, 124, 0, 0, 0, 20, 0, 152, 143, 0, 0, 127, 106, 0, 0, 0, 0, 0, 0, 0, 231, 183, 63, 54, 0, 0, 0, 0, 0, 0, 0, 175, 102, 158, 208, 56, 93, 211, 108, 32, 185, 235, 93, 124, 124, 119, 4, 76, 128, 56, 116, 134, 237, 203, 250, 87, 203, 220, 0, 0, 0, 29, 223, 85, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 177, 241, 15, 134, 219, 208, 188, 84, 22, 19, 21, 134, 0, 78, 68, 189, 127, 154, 21, 21, 144, 1, 234, 73, 181, 22, 83, 167, 138, 234, 240, 47, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 204, 49, 170, 44, 83, 46, 0} #endif #ifndef MAVLINK_MESSAGE_INFO -#define MAVLINK_MESSAGE_INFO {MAVLINK_MESSAGE_INFO_HEARTBEAT, MAVLINK_MESSAGE_INFO_SYS_STATUS, MAVLINK_MESSAGE_INFO_SYSTEM_TIME, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_PING, MAVLINK_MESSAGE_INFO_CHANGE_OPERATOR_CONTROL, MAVLINK_MESSAGE_INFO_CHANGE_OPERATOR_CONTROL_ACK, MAVLINK_MESSAGE_INFO_AUTH_KEY, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_SET_MODE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_PARAM_REQUEST_READ, MAVLINK_MESSAGE_INFO_PARAM_REQUEST_LIST, MAVLINK_MESSAGE_INFO_PARAM_VALUE, MAVLINK_MESSAGE_INFO_PARAM_SET, MAVLINK_MESSAGE_INFO_GPS_RAW_INT, MAVLINK_MESSAGE_INFO_GPS_STATUS, MAVLINK_MESSAGE_INFO_SCALED_IMU, MAVLINK_MESSAGE_INFO_RAW_IMU, MAVLINK_MESSAGE_INFO_RAW_PRESSURE, MAVLINK_MESSAGE_INFO_SCALED_PRESSURE, MAVLINK_MESSAGE_INFO_ATTITUDE, MAVLINK_MESSAGE_INFO_ATTITUDE_QUATERNION, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED, MAVLINK_MESSAGE_INFO_GLOBAL_POSITION_INT, MAVLINK_MESSAGE_INFO_RC_CHANNELS_SCALED, MAVLINK_MESSAGE_INFO_RC_CHANNELS_RAW, MAVLINK_MESSAGE_INFO_SERVO_OUTPUT_RAW, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_PARTIAL_LIST, MAVLINK_MESSAGE_INFO_MISSION_WRITE_PARTIAL_LIST, MAVLINK_MESSAGE_INFO_MISSION_ITEM, MAVLINK_MESSAGE_INFO_MISSION_REQUEST, MAVLINK_MESSAGE_INFO_MISSION_SET_CURRENT, MAVLINK_MESSAGE_INFO_MISSION_CURRENT, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_LIST, MAVLINK_MESSAGE_INFO_MISSION_COUNT, MAVLINK_MESSAGE_INFO_MISSION_CLEAR_ALL, MAVLINK_MESSAGE_INFO_MISSION_ITEM_REACHED, MAVLINK_MESSAGE_INFO_MISSION_ACK, MAVLINK_MESSAGE_INFO_SET_GPS_GLOBAL_ORIGIN, MAVLINK_MESSAGE_INFO_GPS_GLOBAL_ORIGIN, MAVLINK_MESSAGE_INFO_SET_LOCAL_POSITION_SETPOINT, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_SETPOINT, MAVLINK_MESSAGE_INFO_GLOBAL_POSITION_SETPOINT_INT, MAVLINK_MESSAGE_INFO_SET_GLOBAL_POSITION_SETPOINT_INT, MAVLINK_MESSAGE_INFO_SAFETY_SET_ALLOWED_AREA, MAVLINK_MESSAGE_INFO_SAFETY_ALLOWED_AREA, MAVLINK_MESSAGE_INFO_SET_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_SET_ROLL_PITCH_YAW_SPEED_THRUST, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_SPEED_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_SET_QUAD_MOTORS_SETPOINT, MAVLINK_MESSAGE_INFO_SET_QUAD_SWARM_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_NAV_CONTROLLER_OUTPUT, MAVLINK_MESSAGE_INFO_SET_QUAD_SWARM_LED_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_STATE_CORRECTION, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_REQUEST_DATA_STREAM, MAVLINK_MESSAGE_INFO_DATA_STREAM, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_MANUAL_CONTROL, MAVLINK_MESSAGE_INFO_RC_CHANNELS_OVERRIDE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_VFR_HUD, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_COMMAND_LONG, MAVLINK_MESSAGE_INFO_COMMAND_ACK, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_RATES_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_MANUAL_SETPOINT, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED_SYSTEM_GLOBAL_OFFSET, MAVLINK_MESSAGE_INFO_HIL_STATE, MAVLINK_MESSAGE_INFO_HIL_CONTROLS, MAVLINK_MESSAGE_INFO_HIL_RC_INPUTS_RAW, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_OPTICAL_FLOW, MAVLINK_MESSAGE_INFO_GLOBAL_VISION_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_VISION_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_VISION_SPEED_ESTIMATE, MAVLINK_MESSAGE_INFO_VICON_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_HIGHRES_IMU, MAVLINK_MESSAGE_INFO_OMNIDIRECTIONAL_FLOW, MAVLINK_MESSAGE_INFO_HIL_SENSOR, MAVLINK_MESSAGE_INFO_SIM_STATE, MAVLINK_MESSAGE_INFO_RADIO_STATUS, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_START, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_DIR_LIST, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_RES, MAVLINK_MESSAGE_INFO_HIL_GPS, MAVLINK_MESSAGE_INFO_HIL_OPTICAL_FLOW, MAVLINK_MESSAGE_INFO_HIL_STATE_QUATERNION, MAVLINK_MESSAGE_INFO_SCALED_IMU2, MAVLINK_MESSAGE_INFO_LOG_REQUEST_LIST, MAVLINK_MESSAGE_INFO_LOG_ENTRY, MAVLINK_MESSAGE_INFO_LOG_REQUEST_DATA, MAVLINK_MESSAGE_INFO_LOG_DATA, MAVLINK_MESSAGE_INFO_LOG_ERASE, MAVLINK_MESSAGE_INFO_LOG_REQUEST_END, MAVLINK_MESSAGE_INFO_GPS_INJECT_DATA, MAVLINK_MESSAGE_INFO_GPS2_RAW, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_DATA_TRANSMISSION_HANDSHAKE, MAVLINK_MESSAGE_INFO_ENCAPSULATED_DATA, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_BATTERY_STATUS, MAVLINK_MESSAGE_INFO_SETPOINT_8DOF, MAVLINK_MESSAGE_INFO_SETPOINT_6DOF, MAVLINK_MESSAGE_INFO_SENSOR_OFFSETS, MAVLINK_MESSAGE_INFO_SET_MAG_OFFSETS, MAVLINK_MESSAGE_INFO_MEMINFO, MAVLINK_MESSAGE_INFO_AP_ADC, MAVLINK_MESSAGE_INFO_DIGICAM_CONFIGURE, MAVLINK_MESSAGE_INFO_DIGICAM_CONTROL, MAVLINK_MESSAGE_INFO_MOUNT_CONFIGURE, MAVLINK_MESSAGE_INFO_MOUNT_CONTROL, MAVLINK_MESSAGE_INFO_MOUNT_STATUS, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_FENCE_POINT, MAVLINK_MESSAGE_INFO_FENCE_FETCH_POINT, MAVLINK_MESSAGE_INFO_FENCE_STATUS, MAVLINK_MESSAGE_INFO_AHRS, MAVLINK_MESSAGE_INFO_SIMSTATE, MAVLINK_MESSAGE_INFO_HWSTATUS, MAVLINK_MESSAGE_INFO_RADIO, MAVLINK_MESSAGE_INFO_LIMITS_STATUS, MAVLINK_MESSAGE_INFO_WIND, MAVLINK_MESSAGE_INFO_DATA16, MAVLINK_MESSAGE_INFO_DATA32, MAVLINK_MESSAGE_INFO_DATA64, MAVLINK_MESSAGE_INFO_DATA96, MAVLINK_MESSAGE_INFO_RANGEFINDER, MAVLINK_MESSAGE_INFO_AIRSPEED_AUTOCAL, MAVLINK_MESSAGE_INFO_RALLY_POINT, MAVLINK_MESSAGE_INFO_RALLY_FETCH_POINT, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_AHRS2, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_MEMORY_VECT, MAVLINK_MESSAGE_INFO_DEBUG_VECT, MAVLINK_MESSAGE_INFO_NAMED_VALUE_FLOAT, MAVLINK_MESSAGE_INFO_NAMED_VALUE_INT, MAVLINK_MESSAGE_INFO_STATUSTEXT, MAVLINK_MESSAGE_INFO_DEBUG, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}} +#define MAVLINK_MESSAGE_INFO {MAVLINK_MESSAGE_INFO_HEARTBEAT, MAVLINK_MESSAGE_INFO_SYS_STATUS, MAVLINK_MESSAGE_INFO_SYSTEM_TIME, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_PING, MAVLINK_MESSAGE_INFO_CHANGE_OPERATOR_CONTROL, MAVLINK_MESSAGE_INFO_CHANGE_OPERATOR_CONTROL_ACK, MAVLINK_MESSAGE_INFO_AUTH_KEY, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_SET_MODE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_PARAM_REQUEST_READ, MAVLINK_MESSAGE_INFO_PARAM_REQUEST_LIST, MAVLINK_MESSAGE_INFO_PARAM_VALUE, MAVLINK_MESSAGE_INFO_PARAM_SET, MAVLINK_MESSAGE_INFO_GPS_RAW_INT, MAVLINK_MESSAGE_INFO_GPS_STATUS, MAVLINK_MESSAGE_INFO_SCALED_IMU, MAVLINK_MESSAGE_INFO_RAW_IMU, MAVLINK_MESSAGE_INFO_RAW_PRESSURE, MAVLINK_MESSAGE_INFO_SCALED_PRESSURE, MAVLINK_MESSAGE_INFO_ATTITUDE, MAVLINK_MESSAGE_INFO_ATTITUDE_QUATERNION, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED, MAVLINK_MESSAGE_INFO_GLOBAL_POSITION_INT, MAVLINK_MESSAGE_INFO_RC_CHANNELS_SCALED, MAVLINK_MESSAGE_INFO_RC_CHANNELS_RAW, MAVLINK_MESSAGE_INFO_SERVO_OUTPUT_RAW, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_PARTIAL_LIST, MAVLINK_MESSAGE_INFO_MISSION_WRITE_PARTIAL_LIST, MAVLINK_MESSAGE_INFO_MISSION_ITEM, MAVLINK_MESSAGE_INFO_MISSION_REQUEST, MAVLINK_MESSAGE_INFO_MISSION_SET_CURRENT, MAVLINK_MESSAGE_INFO_MISSION_CURRENT, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_LIST, MAVLINK_MESSAGE_INFO_MISSION_COUNT, MAVLINK_MESSAGE_INFO_MISSION_CLEAR_ALL, MAVLINK_MESSAGE_INFO_MISSION_ITEM_REACHED, MAVLINK_MESSAGE_INFO_MISSION_ACK, MAVLINK_MESSAGE_INFO_SET_GPS_GLOBAL_ORIGIN, MAVLINK_MESSAGE_INFO_GPS_GLOBAL_ORIGIN, MAVLINK_MESSAGE_INFO_SET_LOCAL_POSITION_SETPOINT, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_SETPOINT, MAVLINK_MESSAGE_INFO_GLOBAL_POSITION_SETPOINT_INT, MAVLINK_MESSAGE_INFO_SET_GLOBAL_POSITION_SETPOINT_INT, MAVLINK_MESSAGE_INFO_SAFETY_SET_ALLOWED_AREA, MAVLINK_MESSAGE_INFO_SAFETY_ALLOWED_AREA, MAVLINK_MESSAGE_INFO_SET_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_SET_ROLL_PITCH_YAW_SPEED_THRUST, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_SPEED_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_SET_QUAD_MOTORS_SETPOINT, MAVLINK_MESSAGE_INFO_SET_QUAD_SWARM_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_NAV_CONTROLLER_OUTPUT, MAVLINK_MESSAGE_INFO_SET_QUAD_SWARM_LED_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_STATE_CORRECTION, MAVLINK_MESSAGE_INFO_RC_CHANNELS, MAVLINK_MESSAGE_INFO_REQUEST_DATA_STREAM, MAVLINK_MESSAGE_INFO_DATA_STREAM, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_MANUAL_CONTROL, MAVLINK_MESSAGE_INFO_RC_CHANNELS_OVERRIDE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_VFR_HUD, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_COMMAND_LONG, MAVLINK_MESSAGE_INFO_COMMAND_ACK, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_RATES_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_MANUAL_SETPOINT, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED_SYSTEM_GLOBAL_OFFSET, MAVLINK_MESSAGE_INFO_HIL_STATE, MAVLINK_MESSAGE_INFO_HIL_CONTROLS, MAVLINK_MESSAGE_INFO_HIL_RC_INPUTS_RAW, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_OPTICAL_FLOW, MAVLINK_MESSAGE_INFO_GLOBAL_VISION_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_VISION_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_VISION_SPEED_ESTIMATE, MAVLINK_MESSAGE_INFO_VICON_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_HIGHRES_IMU, MAVLINK_MESSAGE_INFO_OMNIDIRECTIONAL_FLOW, MAVLINK_MESSAGE_INFO_HIL_SENSOR, MAVLINK_MESSAGE_INFO_SIM_STATE, MAVLINK_MESSAGE_INFO_RADIO_STATUS, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_START, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_DIR_LIST, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_RES, MAVLINK_MESSAGE_INFO_HIL_GPS, MAVLINK_MESSAGE_INFO_HIL_OPTICAL_FLOW, MAVLINK_MESSAGE_INFO_HIL_STATE_QUATERNION, MAVLINK_MESSAGE_INFO_SCALED_IMU2, MAVLINK_MESSAGE_INFO_LOG_REQUEST_LIST, MAVLINK_MESSAGE_INFO_LOG_ENTRY, MAVLINK_MESSAGE_INFO_LOG_REQUEST_DATA, MAVLINK_MESSAGE_INFO_LOG_DATA, MAVLINK_MESSAGE_INFO_LOG_ERASE, MAVLINK_MESSAGE_INFO_LOG_REQUEST_END, MAVLINK_MESSAGE_INFO_GPS_INJECT_DATA, MAVLINK_MESSAGE_INFO_GPS2_RAW, MAVLINK_MESSAGE_INFO_POWER_STATUS, MAVLINK_MESSAGE_INFO_SERIAL_CONTROL, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_DATA_TRANSMISSION_HANDSHAKE, MAVLINK_MESSAGE_INFO_ENCAPSULATED_DATA, MAVLINK_MESSAGE_INFO_DISTANCE_SENSOR, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_BATTERY_STATUS, MAVLINK_MESSAGE_INFO_SETPOINT_8DOF, MAVLINK_MESSAGE_INFO_SETPOINT_6DOF, MAVLINK_MESSAGE_INFO_SENSOR_OFFSETS, MAVLINK_MESSAGE_INFO_SET_MAG_OFFSETS, MAVLINK_MESSAGE_INFO_MEMINFO, MAVLINK_MESSAGE_INFO_AP_ADC, MAVLINK_MESSAGE_INFO_DIGICAM_CONFIGURE, MAVLINK_MESSAGE_INFO_DIGICAM_CONTROL, MAVLINK_MESSAGE_INFO_MOUNT_CONFIGURE, MAVLINK_MESSAGE_INFO_MOUNT_CONTROL, MAVLINK_MESSAGE_INFO_MOUNT_STATUS, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_FENCE_POINT, MAVLINK_MESSAGE_INFO_FENCE_FETCH_POINT, MAVLINK_MESSAGE_INFO_FENCE_STATUS, MAVLINK_MESSAGE_INFO_AHRS, MAVLINK_MESSAGE_INFO_SIMSTATE, MAVLINK_MESSAGE_INFO_HWSTATUS, MAVLINK_MESSAGE_INFO_RADIO, MAVLINK_MESSAGE_INFO_LIMITS_STATUS, MAVLINK_MESSAGE_INFO_WIND, MAVLINK_MESSAGE_INFO_DATA16, MAVLINK_MESSAGE_INFO_DATA32, MAVLINK_MESSAGE_INFO_DATA64, MAVLINK_MESSAGE_INFO_DATA96, MAVLINK_MESSAGE_INFO_RANGEFINDER, MAVLINK_MESSAGE_INFO_AIRSPEED_AUTOCAL, MAVLINK_MESSAGE_INFO_RALLY_POINT, MAVLINK_MESSAGE_INFO_RALLY_FETCH_POINT, MAVLINK_MESSAGE_INFO_COMPASSMOT_STATUS, MAVLINK_MESSAGE_INFO_AHRS2, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_MEMORY_VECT, MAVLINK_MESSAGE_INFO_DEBUG_VECT, MAVLINK_MESSAGE_INFO_NAMED_VALUE_FLOAT, MAVLINK_MESSAGE_INFO_NAMED_VALUE_INT, MAVLINK_MESSAGE_INFO_STATUSTEXT, MAVLINK_MESSAGE_INFO_DEBUG, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}} #endif #include "../protocol.h" @@ -30,95 +30,6 @@ extern "C" { // ENUM DEFINITIONS -/** @brief Enumeration of possible mount operation modes */ -#ifndef HAVE_ENUM_MAV_MOUNT_MODE -#define HAVE_ENUM_MAV_MOUNT_MODE -enum MAV_MOUNT_MODE -{ - MAV_MOUNT_MODE_RETRACT=0, /* Load and keep safe position (Roll,Pitch,Yaw) from EEPROM and stop stabilization | */ - MAV_MOUNT_MODE_NEUTRAL=1, /* Load and keep neutral position (Roll,Pitch,Yaw) from EEPROM. | */ - MAV_MOUNT_MODE_MAVLINK_TARGETING=2, /* Load neutral position and start MAVLink Roll,Pitch,Yaw control with stabilization | */ - MAV_MOUNT_MODE_RC_TARGETING=3, /* Load neutral position and start RC Roll,Pitch,Yaw control with stabilization | */ - MAV_MOUNT_MODE_GPS_POINT=4, /* Load neutral position and start to point to Lat,Lon,Alt | */ - MAV_MOUNT_MODE_ENUM_END=5, /* | */ -}; -#endif - -/** @brief */ -#ifndef HAVE_ENUM_MAV_CMD -#define HAVE_ENUM_MAV_CMD -enum MAV_CMD -{ - MAV_CMD_NAV_WAYPOINT=16, /* Navigate to MISSION. |Hold time in decimal seconds. (ignored by fixed wing, time to stay at MISSION for rotary wing)| Acceptance radius in meters (if the sphere with this radius is hit, the MISSION counts as reached)| 0 to pass through the WP, if > 0 radius in meters to pass by WP. Positive value for clockwise orbit, negative value for counter-clockwise orbit. Allows trajectory control.| Desired yaw angle at MISSION (rotary wing)| Latitude| Longitude| Altitude| */ - MAV_CMD_NAV_LOITER_UNLIM=17, /* Loiter around this MISSION an unlimited amount of time |Empty| Empty| Radius around MISSION, in meters. If positive loiter clockwise, else counter-clockwise| Desired yaw angle.| Latitude| Longitude| Altitude| */ - MAV_CMD_NAV_LOITER_TURNS=18, /* Loiter around this MISSION for X turns |Turns| Empty| Radius around MISSION, in meters. If positive loiter clockwise, else counter-clockwise| Desired yaw angle.| Latitude| Longitude| Altitude| */ - MAV_CMD_NAV_LOITER_TIME=19, /* Loiter around this MISSION for X seconds |Seconds (decimal)| Empty| Radius around MISSION, in meters. If positive loiter clockwise, else counter-clockwise| Desired yaw angle.| Latitude| Longitude| Altitude| */ - MAV_CMD_NAV_RETURN_TO_LAUNCH=20, /* Return to launch location |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */ - MAV_CMD_NAV_LAND=21, /* Land at location |Empty| Empty| Empty| Desired yaw angle.| Latitude| Longitude| Altitude| */ - MAV_CMD_NAV_TAKEOFF=22, /* Takeoff from ground / hand |Minimum pitch (if airspeed sensor present), desired pitch without sensor| Empty| Empty| Yaw angle (if magnetometer present), ignored without magnetometer| Latitude| Longitude| Altitude| */ - MAV_CMD_NAV_ROI=80, /* Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of intereset mode. (see MAV_ROI enum)| MISSION index/ target ID. (see MAV_ROI enum)| ROI index (allows a vehicle to manage multiple ROI's)| Empty| x the location of the fixed ROI (see MAV_FRAME)| y| z| */ - MAV_CMD_NAV_PATHPLANNING=81, /* Control autonomous path planning on the MAV. |0: Disable local obstacle avoidance / local path planning (without resetting map), 1: Enable local path planning, 2: Enable and reset local path planning| 0: Disable full path planning (without resetting map), 1: Enable, 2: Enable and reset map/occupancy grid, 3: Enable and reset planned route, but not occupancy grid| Empty| Yaw angle at goal, in compass degrees, [0..360]| Latitude/X of goal| Longitude/Y of goal| Altitude/Z of goal| */ - MAV_CMD_NAV_LAST=95, /* NOP - This command is only used to mark the upper limit of the NAV/ACTION commands in the enumeration |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */ - MAV_CMD_CONDITION_DELAY=112, /* Delay mission state machine. |Delay in seconds (decimal)| Empty| Empty| Empty| Empty| Empty| Empty| */ - MAV_CMD_CONDITION_CHANGE_ALT=113, /* Ascend/descend at rate. Delay mission state machine until desired altitude reached. |Descent / Ascend rate (m/s)| Empty| Empty| Empty| Empty| Empty| Finish Altitude| */ - MAV_CMD_CONDITION_DISTANCE=114, /* Delay mission state machine until within desired distance of next NAV point. |Distance (meters)| Empty| Empty| Empty| Empty| Empty| Empty| */ - MAV_CMD_CONDITION_YAW=115, /* Reach a certain target angle. |target angle: [0-360], 0 is north| speed during yaw change:[deg per second]| direction: negative: counter clockwise, positive: clockwise [-1,1]| relative offset or absolute angle: [ 1,0]| Empty| Empty| Empty| */ - MAV_CMD_CONDITION_LAST=159, /* NOP - This command is only used to mark the upper limit of the CONDITION commands in the enumeration |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */ - MAV_CMD_DO_SET_MODE=176, /* Set system mode. |Mode, as defined by ENUM MAV_MODE| Empty| Empty| Empty| Empty| Empty| Empty| */ - MAV_CMD_DO_JUMP=177, /* Jump to the desired command in the mission list. Repeat this action only the specified number of times |Sequence number| Repeat count| Empty| Empty| Empty| Empty| Empty| */ - MAV_CMD_DO_CHANGE_SPEED=178, /* Change speed and/or throttle set points. |Speed type (0=Airspeed, 1=Ground Speed)| Speed (m/s, -1 indicates no change)| Throttle ( Percent, -1 indicates no change)| Empty| Empty| Empty| Empty| */ - MAV_CMD_DO_SET_HOME=179, /* Changes the home location either to the current location or a specified location. |Use current (1=use current location, 0=use specified location)| Empty| Empty| Empty| Latitude| Longitude| Altitude| */ - MAV_CMD_DO_SET_PARAMETER=180, /* Set a system parameter. Caution! Use of this command requires knowledge of the numeric enumeration value of the parameter. |Parameter number| Parameter value| Empty| Empty| Empty| Empty| Empty| */ - MAV_CMD_DO_SET_RELAY=181, /* Set a relay to a condition. |Relay number| Setting (1=on, 0=off, others possible depending on system hardware)| Empty| Empty| Empty| Empty| Empty| */ - MAV_CMD_DO_REPEAT_RELAY=182, /* Cycle a relay on and off for a desired number of cyles with a desired period. |Relay number| Cycle count| Cycle time (seconds, decimal)| Empty| Empty| Empty| Empty| */ - MAV_CMD_DO_SET_SERVO=183, /* Set a servo to a desired PWM value. |Servo number| PWM (microseconds, 1000 to 2000 typical)| Empty| Empty| Empty| Empty| Empty| */ - MAV_CMD_DO_REPEAT_SERVO=184, /* Cycle a between its nominal setting and a desired PWM for a desired number of cycles with a desired period. |Servo number| PWM (microseconds, 1000 to 2000 typical)| Cycle count| Cycle time (seconds)| Empty| Empty| Empty| */ - MAV_CMD_DO_CONTROL_VIDEO=200, /* Control onboard camera system. |Camera ID (-1 for all)| Transmission: 0: disabled, 1: enabled compressed, 2: enabled raw| Transmission mode: 0: video stream, >0: single images every n seconds (decimal)| Recording: 0: disabled, 1: enabled compressed, 2: enabled raw| Empty| Empty| Empty| */ - MAV_CMD_DO_SET_ROI=201, /* Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of intereset mode. (see MAV_ROI enum)| MISSION index/ target ID. (see MAV_ROI enum)| ROI index (allows a vehicle to manage multiple ROI's)| Empty| x the location of the fixed ROI (see MAV_FRAME)| y| z| */ - MAV_CMD_DO_DIGICAM_CONFIGURE=202, /* Mission command to configure an on-board camera controller system. |Modes: P, TV, AV, M, Etc| Shutter speed: Divisor number for one second| Aperture: F stop number| ISO number e.g. 80, 100, 200, Etc| Exposure type enumerator| Command Identity| Main engine cut-off time before camera trigger in seconds/10 (0 means no cut-off)| */ - MAV_CMD_DO_DIGICAM_CONTROL=203, /* Mission command to control an on-board camera controller system. |Session control e.g. show/hide lens| Zoom's absolute position| Zooming step value to offset zoom from the current position| Focus Locking, Unlocking or Re-locking| Shooting Command| Command Identity| Empty| */ - MAV_CMD_DO_MOUNT_CONFIGURE=204, /* Mission command to configure a camera or antenna mount |Mount operation mode (see MAV_MOUNT_MODE enum)| stabilize roll? (1 = yes, 0 = no)| stabilize pitch? (1 = yes, 0 = no)| stabilize yaw? (1 = yes, 0 = no)| Empty| Empty| Empty| */ - MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch(deg*100) or lat, depending on mount mode.| roll(deg*100) or lon depending on mount mode| yaw(deg*100) or alt (in cm) depending on mount mode| Empty| Empty| Empty| Empty| */ - MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set CAM_TRIGG_DIST for this flight |Camera trigger distance (meters)| Empty| Empty| Empty| Empty| Empty| Empty| */ - MAV_CMD_DO_LAST=240, /* NOP - This command is only used to mark the upper limit of the DO commands in the enumeration |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */ - MAV_CMD_PREFLIGHT_CALIBRATION=241, /* Trigger calibration. This command will be only accepted if in pre-flight mode. |Gyro calibration: 0: no, 1: yes| Magnetometer calibration: 0: no, 1: yes| Ground pressure: 0: no, 1: yes| Radio calibration: 0: no, 1: yes| Accelerometer calibration: 0: no, 1: yes| Empty| Empty| */ - MAV_CMD_PREFLIGHT_SET_SENSOR_OFFSETS=242, /* Set sensor offsets. This command will be only accepted if in pre-flight mode. |Sensor to adjust the offsets for: 0: gyros, 1: accelerometer, 2: magnetometer, 3: barometer, 4: optical flow| X axis offset (or generic dimension 1), in the sensor's raw units| Y axis offset (or generic dimension 2), in the sensor's raw units| Z axis offset (or generic dimension 3), in the sensor's raw units| Generic dimension 4, in the sensor's raw units| Generic dimension 5, in the sensor's raw units| Generic dimension 6, in the sensor's raw units| */ - MAV_CMD_PREFLIGHT_STORAGE=245, /* Request storage of different parameter values and logs. This command will be only accepted if in pre-flight mode. |Parameter storage: 0: READ FROM FLASH/EEPROM, 1: WRITE CURRENT TO FLASH/EEPROM| Mission storage: 0: READ FROM FLASH/EEPROM, 1: WRITE CURRENT TO FLASH/EEPROM| Reserved| Reserved| Empty| Empty| Empty| */ - MAV_CMD_PREFLIGHT_REBOOT_SHUTDOWN=246, /* Request the reboot or shutdown of system components. |0: Do nothing for autopilot, 1: Reboot autopilot, 2: Shutdown autopilot.| 0: Do nothing for onboard computer, 1: Reboot onboard computer, 2: Shutdown onboard computer.| Reserved| Reserved| Empty| Empty| Empty| */ - MAV_CMD_OVERRIDE_GOTO=252, /* Hold / continue the current action |MAV_GOTO_DO_HOLD: hold MAV_GOTO_DO_CONTINUE: continue with next item in mission plan| MAV_GOTO_HOLD_AT_CURRENT_POSITION: Hold at current position MAV_GOTO_HOLD_AT_SPECIFIED_POSITION: hold at specified position| MAV_FRAME coordinate frame of hold point| Desired yaw angle in degrees| Latitude / X position| Longitude / Y position| Altitude / Z position| */ - MAV_CMD_MISSION_START=300, /* start running a mission |first_item: the first mission item to run| last_item: the last mission item to run (after this item is run, the mission ends)| */ - MAV_CMD_COMPONENT_ARM_DISARM=400, /* Arms / Disarms a component |1 to arm, 0 to disarm| */ - MAV_CMD_START_RX_PAIR=500, /* Starts receiver pairing |0:Spektrum| 0:Spektrum DSM2, 1:Spektrum DSMX| */ - MAV_CMD_ENUM_END=501, /* | */ -}; -#endif - -/** @brief */ -#ifndef HAVE_ENUM_FENCE_ACTION -#define HAVE_ENUM_FENCE_ACTION -enum FENCE_ACTION -{ - FENCE_ACTION_NONE=0, /* Disable fenced mode | */ - FENCE_ACTION_GUIDED=1, /* Switched to guided mode to return point (fence point 0) | */ - FENCE_ACTION_REPORT=2, /* Report fence breach, but don't take action | */ - FENCE_ACTION_GUIDED_THR_PASS=3, /* Switched to guided mode to return point (fence point 0) with manual throttle control | */ - FENCE_ACTION_ENUM_END=4, /* | */ -}; -#endif - -/** @brief */ -#ifndef HAVE_ENUM_FENCE_BREACH -#define HAVE_ENUM_FENCE_BREACH -enum FENCE_BREACH -{ - FENCE_BREACH_NONE=0, /* No last fence breach | */ - FENCE_BREACH_MINALT=1, /* Breached minimum altitude | */ - FENCE_BREACH_MAXALT=2, /* Breached maximum altitude | */ - FENCE_BREACH_BOUNDARY=3, /* Breached fence boundary | */ - FENCE_BREACH_ENUM_END=4, /* | */ -}; -#endif - /** @brief */ #ifndef HAVE_ENUM_LIMITS_STATE #define HAVE_ENUM_LIMITS_STATE @@ -157,6 +68,18 @@ enum RALLY_FLAGS }; #endif +/** @brief */ +#ifndef HAVE_ENUM_PARACHUTE_ACTION +#define HAVE_ENUM_PARACHUTE_ACTION +enum PARACHUTE_ACTION +{ + PARACHUTE_DISABLE=0, /* Disable parachute release | */ + PARACHUTE_ENABLE=1, /* Enable parachute release | */ + PARACHUTE_RELEASE=2, /* Release parachute | */ + PARACHUTE_ACTION_ENUM_END=3, /* | */ +}; +#endif + #include "../common/common.h" // MAVLINK VERSION @@ -197,6 +120,7 @@ enum RALLY_FLAGS #include "./mavlink_msg_airspeed_autocal.h" #include "./mavlink_msg_rally_point.h" #include "./mavlink_msg_rally_fetch_point.h" +#include "./mavlink_msg_compassmot_status.h" #include "./mavlink_msg_ahrs2.h" #ifdef __cplusplus diff --git a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_ahrs.h b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_ahrs.h index c3ead1140..50ddc79e5 100644 --- a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_ahrs.h +++ b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_ahrs.h @@ -212,6 +212,50 @@ static inline void mavlink_msg_ahrs_send(mavlink_channel_t chan, float omegaIx, #endif } +#if MAVLINK_MSG_ID_AHRS_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_ahrs_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, float omegaIx, float omegaIy, float omegaIz, float accel_weight, float renorm_val, float error_rp, float error_yaw) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, omegaIx); + _mav_put_float(buf, 4, omegaIy); + _mav_put_float(buf, 8, omegaIz); + _mav_put_float(buf, 12, accel_weight); + _mav_put_float(buf, 16, renorm_val); + _mav_put_float(buf, 20, error_rp); + _mav_put_float(buf, 24, error_yaw); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_AHRS, buf, MAVLINK_MSG_ID_AHRS_LEN, MAVLINK_MSG_ID_AHRS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_AHRS, buf, MAVLINK_MSG_ID_AHRS_LEN); +#endif +#else + mavlink_ahrs_t *packet = (mavlink_ahrs_t *)msgbuf; + packet->omegaIx = omegaIx; + packet->omegaIy = omegaIy; + packet->omegaIz = omegaIz; + packet->accel_weight = accel_weight; + packet->renorm_val = renorm_val; + packet->error_rp = error_rp; + packet->error_yaw = error_yaw; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_AHRS, (const char *)packet, MAVLINK_MSG_ID_AHRS_LEN, MAVLINK_MSG_ID_AHRS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_AHRS, (const char *)packet, MAVLINK_MSG_ID_AHRS_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE AHRS UNPACKING diff --git a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_ahrs2.h b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_ahrs2.h index f6fde9590..33e006688 100644 --- a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_ahrs2.h +++ b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_ahrs2.h @@ -201,6 +201,48 @@ static inline void mavlink_msg_ahrs2_send(mavlink_channel_t chan, float roll, fl #endif } +#if MAVLINK_MSG_ID_AHRS2_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_ahrs2_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, float roll, float pitch, float yaw, float altitude, int32_t lat, int32_t lng) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, roll); + _mav_put_float(buf, 4, pitch); + _mav_put_float(buf, 8, yaw); + _mav_put_float(buf, 12, altitude); + _mav_put_int32_t(buf, 16, lat); + _mav_put_int32_t(buf, 20, lng); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_AHRS2, buf, MAVLINK_MSG_ID_AHRS2_LEN, MAVLINK_MSG_ID_AHRS2_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_AHRS2, buf, MAVLINK_MSG_ID_AHRS2_LEN); +#endif +#else + mavlink_ahrs2_t *packet = (mavlink_ahrs2_t *)msgbuf; + packet->roll = roll; + packet->pitch = pitch; + packet->yaw = yaw; + packet->altitude = altitude; + packet->lat = lat; + packet->lng = lng; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_AHRS2, (const char *)packet, MAVLINK_MSG_ID_AHRS2_LEN, MAVLINK_MSG_ID_AHRS2_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_AHRS2, (const char *)packet, MAVLINK_MSG_ID_AHRS2_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE AHRS2 UNPACKING diff --git a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_airspeed_autocal.h b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_airspeed_autocal.h index d046f2ad0..521831c8f 100644 --- a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_airspeed_autocal.h +++ b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_airspeed_autocal.h @@ -267,6 +267,60 @@ static inline void mavlink_msg_airspeed_autocal_send(mavlink_channel_t chan, flo #endif } +#if MAVLINK_MSG_ID_AIRSPEED_AUTOCAL_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_airspeed_autocal_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, float vx, float vy, float vz, float diff_pressure, float EAS2TAS, float ratio, float state_x, float state_y, float state_z, float Pax, float Pby, float Pcz) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, vx); + _mav_put_float(buf, 4, vy); + _mav_put_float(buf, 8, vz); + _mav_put_float(buf, 12, diff_pressure); + _mav_put_float(buf, 16, EAS2TAS); + _mav_put_float(buf, 20, ratio); + _mav_put_float(buf, 24, state_x); + _mav_put_float(buf, 28, state_y); + _mav_put_float(buf, 32, state_z); + _mav_put_float(buf, 36, Pax); + _mav_put_float(buf, 40, Pby); + _mav_put_float(buf, 44, Pcz); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_AIRSPEED_AUTOCAL, buf, MAVLINK_MSG_ID_AIRSPEED_AUTOCAL_LEN, MAVLINK_MSG_ID_AIRSPEED_AUTOCAL_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_AIRSPEED_AUTOCAL, buf, MAVLINK_MSG_ID_AIRSPEED_AUTOCAL_LEN); +#endif +#else + mavlink_airspeed_autocal_t *packet = (mavlink_airspeed_autocal_t *)msgbuf; + packet->vx = vx; + packet->vy = vy; + packet->vz = vz; + packet->diff_pressure = diff_pressure; + packet->EAS2TAS = EAS2TAS; + packet->ratio = ratio; + packet->state_x = state_x; + packet->state_y = state_y; + packet->state_z = state_z; + packet->Pax = Pax; + packet->Pby = Pby; + packet->Pcz = Pcz; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_AIRSPEED_AUTOCAL, (const char *)packet, MAVLINK_MSG_ID_AIRSPEED_AUTOCAL_LEN, MAVLINK_MSG_ID_AIRSPEED_AUTOCAL_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_AIRSPEED_AUTOCAL, (const char *)packet, MAVLINK_MSG_ID_AIRSPEED_AUTOCAL_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE AIRSPEED_AUTOCAL UNPACKING diff --git a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_ap_adc.h b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_ap_adc.h index 821ce73e4..3c18e644e 100644 --- a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_ap_adc.h +++ b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_ap_adc.h @@ -201,6 +201,48 @@ static inline void mavlink_msg_ap_adc_send(mavlink_channel_t chan, uint16_t adc1 #endif } +#if MAVLINK_MSG_ID_AP_ADC_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_ap_adc_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint16_t adc1, uint16_t adc2, uint16_t adc3, uint16_t adc4, uint16_t adc5, uint16_t adc6) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint16_t(buf, 0, adc1); + _mav_put_uint16_t(buf, 2, adc2); + _mav_put_uint16_t(buf, 4, adc3); + _mav_put_uint16_t(buf, 6, adc4); + _mav_put_uint16_t(buf, 8, adc5); + _mav_put_uint16_t(buf, 10, adc6); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_AP_ADC, buf, MAVLINK_MSG_ID_AP_ADC_LEN, MAVLINK_MSG_ID_AP_ADC_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_AP_ADC, buf, MAVLINK_MSG_ID_AP_ADC_LEN); +#endif +#else + mavlink_ap_adc_t *packet = (mavlink_ap_adc_t *)msgbuf; + packet->adc1 = adc1; + packet->adc2 = adc2; + packet->adc3 = adc3; + packet->adc4 = adc4; + packet->adc5 = adc5; + packet->adc6 = adc6; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_AP_ADC, (const char *)packet, MAVLINK_MSG_ID_AP_ADC_LEN, MAVLINK_MSG_ID_AP_ADC_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_AP_ADC, (const char *)packet, MAVLINK_MSG_ID_AP_ADC_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE AP_ADC UNPACKING diff --git a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_compassmot_status.h b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_compassmot_status.h new file mode 100644 index 000000000..965545988 --- /dev/null +++ b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_compassmot_status.h @@ -0,0 +1,329 @@ +// MESSAGE COMPASSMOT_STATUS PACKING + +#define MAVLINK_MSG_ID_COMPASSMOT_STATUS 177 + +typedef struct __mavlink_compassmot_status_t +{ + float current; ///< current (amps) + float CompensationX; ///< Motor Compensation X + float CompensationY; ///< Motor Compensation Y + float CompensationZ; ///< Motor Compensation Z + uint16_t throttle; ///< throttle (percent*10) + uint16_t interference; ///< interference (percent) +} mavlink_compassmot_status_t; + +#define MAVLINK_MSG_ID_COMPASSMOT_STATUS_LEN 20 +#define MAVLINK_MSG_ID_177_LEN 20 + +#define MAVLINK_MSG_ID_COMPASSMOT_STATUS_CRC 240 +#define MAVLINK_MSG_ID_177_CRC 240 + + + +#define MAVLINK_MESSAGE_INFO_COMPASSMOT_STATUS { \ + "COMPASSMOT_STATUS", \ + 6, \ + { { "current", NULL, MAVLINK_TYPE_FLOAT, 0, 0, offsetof(mavlink_compassmot_status_t, current) }, \ + { "CompensationX", NULL, MAVLINK_TYPE_FLOAT, 0, 4, offsetof(mavlink_compassmot_status_t, CompensationX) }, \ + { "CompensationY", NULL, MAVLINK_TYPE_FLOAT, 0, 8, offsetof(mavlink_compassmot_status_t, CompensationY) }, \ + { "CompensationZ", NULL, MAVLINK_TYPE_FLOAT, 0, 12, offsetof(mavlink_compassmot_status_t, CompensationZ) }, \ + { "throttle", NULL, MAVLINK_TYPE_UINT16_T, 0, 16, offsetof(mavlink_compassmot_status_t, throttle) }, \ + { "interference", NULL, MAVLINK_TYPE_UINT16_T, 0, 18, offsetof(mavlink_compassmot_status_t, interference) }, \ + } \ +} + + +/** + * @brief Pack a compassmot_status message + * @param system_id ID of this system + * @param component_id ID of this component (e.g. 200 for IMU) + * @param msg The MAVLink message to compress the data into + * + * @param throttle throttle (percent*10) + * @param current current (amps) + * @param interference interference (percent) + * @param CompensationX Motor Compensation X + * @param CompensationY Motor Compensation Y + * @param CompensationZ Motor Compensation Z + * @return length of the message in bytes (excluding serial stream start sign) + */ +static inline uint16_t mavlink_msg_compassmot_status_pack(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, + uint16_t throttle, float current, uint16_t interference, float CompensationX, float CompensationY, float CompensationZ) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char buf[MAVLINK_MSG_ID_COMPASSMOT_STATUS_LEN]; + _mav_put_float(buf, 0, current); + _mav_put_float(buf, 4, CompensationX); + _mav_put_float(buf, 8, CompensationY); + _mav_put_float(buf, 12, CompensationZ); + _mav_put_uint16_t(buf, 16, throttle); + _mav_put_uint16_t(buf, 18, interference); + + memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, MAVLINK_MSG_ID_COMPASSMOT_STATUS_LEN); +#else + mavlink_compassmot_status_t packet; + packet.current = current; + packet.CompensationX = CompensationX; + packet.CompensationY = CompensationY; + packet.CompensationZ = CompensationZ; + packet.throttle = throttle; + packet.interference = interference; + + memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, MAVLINK_MSG_ID_COMPASSMOT_STATUS_LEN); +#endif + + msg->msgid = MAVLINK_MSG_ID_COMPASSMOT_STATUS; +#if MAVLINK_CRC_EXTRA + return mavlink_finalize_message(msg, system_id, component_id, MAVLINK_MSG_ID_COMPASSMOT_STATUS_LEN, MAVLINK_MSG_ID_COMPASSMOT_STATUS_CRC); +#else + return mavlink_finalize_message(msg, system_id, component_id, MAVLINK_MSG_ID_COMPASSMOT_STATUS_LEN); +#endif +} + +/** + * @brief Pack a compassmot_status message on a channel + * @param system_id ID of this system + * @param component_id ID of this component (e.g. 200 for IMU) + * @param chan The MAVLink channel this message will be sent over + * @param msg The MAVLink message to compress the data into + * @param throttle throttle (percent*10) + * @param current current (amps) + * @param interference interference (percent) + * @param CompensationX Motor Compensation X + * @param CompensationY Motor Compensation Y + * @param CompensationZ Motor Compensation Z + * @return length of the message in bytes (excluding serial stream start sign) + */ +static inline uint16_t mavlink_msg_compassmot_status_pack_chan(uint8_t system_id, uint8_t component_id, uint8_t chan, + mavlink_message_t* msg, + uint16_t throttle,float current,uint16_t interference,float CompensationX,float CompensationY,float CompensationZ) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char buf[MAVLINK_MSG_ID_COMPASSMOT_STATUS_LEN]; + _mav_put_float(buf, 0, current); + _mav_put_float(buf, 4, CompensationX); + _mav_put_float(buf, 8, CompensationY); + _mav_put_float(buf, 12, CompensationZ); + _mav_put_uint16_t(buf, 16, throttle); + _mav_put_uint16_t(buf, 18, interference); + + memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, MAVLINK_MSG_ID_COMPASSMOT_STATUS_LEN); +#else + mavlink_compassmot_status_t packet; + packet.current = current; + packet.CompensationX = CompensationX; + packet.CompensationY = CompensationY; + packet.CompensationZ = CompensationZ; + packet.throttle = throttle; + packet.interference = interference; + + memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, MAVLINK_MSG_ID_COMPASSMOT_STATUS_LEN); +#endif + + msg->msgid = MAVLINK_MSG_ID_COMPASSMOT_STATUS; +#if MAVLINK_CRC_EXTRA + return mavlink_finalize_message_chan(msg, system_id, component_id, chan, MAVLINK_MSG_ID_COMPASSMOT_STATUS_LEN, MAVLINK_MSG_ID_COMPASSMOT_STATUS_CRC); +#else + return mavlink_finalize_message_chan(msg, system_id, component_id, chan, MAVLINK_MSG_ID_COMPASSMOT_STATUS_LEN); +#endif +} + +/** + * @brief Encode a compassmot_status struct + * + * @param system_id ID of this system + * @param component_id ID of this component (e.g. 200 for IMU) + * @param msg The MAVLink message to compress the data into + * @param compassmot_status C-struct to read the message contents from + */ +static inline uint16_t mavlink_msg_compassmot_status_encode(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, const mavlink_compassmot_status_t* compassmot_status) +{ + return mavlink_msg_compassmot_status_pack(system_id, component_id, msg, compassmot_status->throttle, compassmot_status->current, compassmot_status->interference, compassmot_status->CompensationX, compassmot_status->CompensationY, compassmot_status->CompensationZ); +} + +/** + * @brief Encode a compassmot_status struct on a channel + * + * @param system_id ID of this system + * @param component_id ID of this component (e.g. 200 for IMU) + * @param chan The MAVLink channel this message will be sent over + * @param msg The MAVLink message to compress the data into + * @param compassmot_status C-struct to read the message contents from + */ +static inline uint16_t mavlink_msg_compassmot_status_encode_chan(uint8_t system_id, uint8_t component_id, uint8_t chan, mavlink_message_t* msg, const mavlink_compassmot_status_t* compassmot_status) +{ + return mavlink_msg_compassmot_status_pack_chan(system_id, component_id, chan, msg, compassmot_status->throttle, compassmot_status->current, compassmot_status->interference, compassmot_status->CompensationX, compassmot_status->CompensationY, compassmot_status->CompensationZ); +} + +/** + * @brief Send a compassmot_status message + * @param chan MAVLink channel to send the message + * + * @param throttle throttle (percent*10) + * @param current current (amps) + * @param interference interference (percent) + * @param CompensationX Motor Compensation X + * @param CompensationY Motor Compensation Y + * @param CompensationZ Motor Compensation Z + */ +#ifdef MAVLINK_USE_CONVENIENCE_FUNCTIONS + +static inline void mavlink_msg_compassmot_status_send(mavlink_channel_t chan, uint16_t throttle, float current, uint16_t interference, float CompensationX, float CompensationY, float CompensationZ) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char buf[MAVLINK_MSG_ID_COMPASSMOT_STATUS_LEN]; + _mav_put_float(buf, 0, current); + _mav_put_float(buf, 4, CompensationX); + _mav_put_float(buf, 8, CompensationY); + _mav_put_float(buf, 12, CompensationZ); + _mav_put_uint16_t(buf, 16, throttle); + _mav_put_uint16_t(buf, 18, interference); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_COMPASSMOT_STATUS, buf, MAVLINK_MSG_ID_COMPASSMOT_STATUS_LEN, MAVLINK_MSG_ID_COMPASSMOT_STATUS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_COMPASSMOT_STATUS, buf, MAVLINK_MSG_ID_COMPASSMOT_STATUS_LEN); +#endif +#else + mavlink_compassmot_status_t packet; + packet.current = current; + packet.CompensationX = CompensationX; + packet.CompensationY = CompensationY; + packet.CompensationZ = CompensationZ; + packet.throttle = throttle; + packet.interference = interference; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_COMPASSMOT_STATUS, (const char *)&packet, MAVLINK_MSG_ID_COMPASSMOT_STATUS_LEN, MAVLINK_MSG_ID_COMPASSMOT_STATUS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_COMPASSMOT_STATUS, (const char *)&packet, MAVLINK_MSG_ID_COMPASSMOT_STATUS_LEN); +#endif +#endif +} + +#if MAVLINK_MSG_ID_COMPASSMOT_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_compassmot_status_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint16_t throttle, float current, uint16_t interference, float CompensationX, float CompensationY, float CompensationZ) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, current); + _mav_put_float(buf, 4, CompensationX); + _mav_put_float(buf, 8, CompensationY); + _mav_put_float(buf, 12, CompensationZ); + _mav_put_uint16_t(buf, 16, throttle); + _mav_put_uint16_t(buf, 18, interference); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_COMPASSMOT_STATUS, buf, MAVLINK_MSG_ID_COMPASSMOT_STATUS_LEN, MAVLINK_MSG_ID_COMPASSMOT_STATUS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_COMPASSMOT_STATUS, buf, MAVLINK_MSG_ID_COMPASSMOT_STATUS_LEN); +#endif +#else + mavlink_compassmot_status_t *packet = (mavlink_compassmot_status_t *)msgbuf; + packet->current = current; + packet->CompensationX = CompensationX; + packet->CompensationY = CompensationY; + packet->CompensationZ = CompensationZ; + packet->throttle = throttle; + packet->interference = interference; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_COMPASSMOT_STATUS, (const char *)packet, MAVLINK_MSG_ID_COMPASSMOT_STATUS_LEN, MAVLINK_MSG_ID_COMPASSMOT_STATUS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_COMPASSMOT_STATUS, (const char *)packet, MAVLINK_MSG_ID_COMPASSMOT_STATUS_LEN); +#endif +#endif +} +#endif + +#endif + +// MESSAGE COMPASSMOT_STATUS UNPACKING + + +/** + * @brief Get field throttle from compassmot_status message + * + * @return throttle (percent*10) + */ +static inline uint16_t mavlink_msg_compassmot_status_get_throttle(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint16_t(msg, 16); +} + +/** + * @brief Get field current from compassmot_status message + * + * @return current (amps) + */ +static inline float mavlink_msg_compassmot_status_get_current(const mavlink_message_t* msg) +{ + return _MAV_RETURN_float(msg, 0); +} + +/** + * @brief Get field interference from compassmot_status message + * + * @return interference (percent) + */ +static inline uint16_t mavlink_msg_compassmot_status_get_interference(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint16_t(msg, 18); +} + +/** + * @brief Get field CompensationX from compassmot_status message + * + * @return Motor Compensation X + */ +static inline float mavlink_msg_compassmot_status_get_CompensationX(const mavlink_message_t* msg) +{ + return _MAV_RETURN_float(msg, 4); +} + +/** + * @brief Get field CompensationY from compassmot_status message + * + * @return Motor Compensation Y + */ +static inline float mavlink_msg_compassmot_status_get_CompensationY(const mavlink_message_t* msg) +{ + return _MAV_RETURN_float(msg, 8); +} + +/** + * @brief Get field CompensationZ from compassmot_status message + * + * @return Motor Compensation Z + */ +static inline float mavlink_msg_compassmot_status_get_CompensationZ(const mavlink_message_t* msg) +{ + return _MAV_RETURN_float(msg, 12); +} + +/** + * @brief Decode a compassmot_status message into a struct + * + * @param msg The message to decode + * @param compassmot_status C-struct to decode the message contents into + */ +static inline void mavlink_msg_compassmot_status_decode(const mavlink_message_t* msg, mavlink_compassmot_status_t* compassmot_status) +{ +#if MAVLINK_NEED_BYTE_SWAP + compassmot_status->current = mavlink_msg_compassmot_status_get_current(msg); + compassmot_status->CompensationX = mavlink_msg_compassmot_status_get_CompensationX(msg); + compassmot_status->CompensationY = mavlink_msg_compassmot_status_get_CompensationY(msg); + compassmot_status->CompensationZ = mavlink_msg_compassmot_status_get_CompensationZ(msg); + compassmot_status->throttle = mavlink_msg_compassmot_status_get_throttle(msg); + compassmot_status->interference = mavlink_msg_compassmot_status_get_interference(msg); +#else + memcpy(compassmot_status, _MAV_PAYLOAD(msg), MAVLINK_MSG_ID_COMPASSMOT_STATUS_LEN); +#endif +} diff --git a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_data16.h b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_data16.h index 9200eefa0..7bad1b23d 100644 --- a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_data16.h +++ b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_data16.h @@ -162,6 +162,40 @@ static inline void mavlink_msg_data16_send(mavlink_channel_t chan, uint8_t type, #endif } +#if MAVLINK_MSG_ID_DATA16_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_data16_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t type, uint8_t len, const uint8_t *data) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint8_t(buf, 0, type); + _mav_put_uint8_t(buf, 1, len); + _mav_put_uint8_t_array(buf, 2, data, 16); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DATA16, buf, MAVLINK_MSG_ID_DATA16_LEN, MAVLINK_MSG_ID_DATA16_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DATA16, buf, MAVLINK_MSG_ID_DATA16_LEN); +#endif +#else + mavlink_data16_t *packet = (mavlink_data16_t *)msgbuf; + packet->type = type; + packet->len = len; + mav_array_memcpy(packet->data, data, sizeof(uint8_t)*16); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DATA16, (const char *)packet, MAVLINK_MSG_ID_DATA16_LEN, MAVLINK_MSG_ID_DATA16_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DATA16, (const char *)packet, MAVLINK_MSG_ID_DATA16_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE DATA16 UNPACKING diff --git a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_data32.h b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_data32.h index 3afedb787..df7a2ec80 100644 --- a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_data32.h +++ b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_data32.h @@ -162,6 +162,40 @@ static inline void mavlink_msg_data32_send(mavlink_channel_t chan, uint8_t type, #endif } +#if MAVLINK_MSG_ID_DATA32_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_data32_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t type, uint8_t len, const uint8_t *data) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint8_t(buf, 0, type); + _mav_put_uint8_t(buf, 1, len); + _mav_put_uint8_t_array(buf, 2, data, 32); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DATA32, buf, MAVLINK_MSG_ID_DATA32_LEN, MAVLINK_MSG_ID_DATA32_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DATA32, buf, MAVLINK_MSG_ID_DATA32_LEN); +#endif +#else + mavlink_data32_t *packet = (mavlink_data32_t *)msgbuf; + packet->type = type; + packet->len = len; + mav_array_memcpy(packet->data, data, sizeof(uint8_t)*32); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DATA32, (const char *)packet, MAVLINK_MSG_ID_DATA32_LEN, MAVLINK_MSG_ID_DATA32_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DATA32, (const char *)packet, MAVLINK_MSG_ID_DATA32_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE DATA32 UNPACKING diff --git a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_data64.h b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_data64.h index 6931ada16..c354f8908 100644 --- a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_data64.h +++ b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_data64.h @@ -162,6 +162,40 @@ static inline void mavlink_msg_data64_send(mavlink_channel_t chan, uint8_t type, #endif } +#if MAVLINK_MSG_ID_DATA64_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_data64_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t type, uint8_t len, const uint8_t *data) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint8_t(buf, 0, type); + _mav_put_uint8_t(buf, 1, len); + _mav_put_uint8_t_array(buf, 2, data, 64); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DATA64, buf, MAVLINK_MSG_ID_DATA64_LEN, MAVLINK_MSG_ID_DATA64_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DATA64, buf, MAVLINK_MSG_ID_DATA64_LEN); +#endif +#else + mavlink_data64_t *packet = (mavlink_data64_t *)msgbuf; + packet->type = type; + packet->len = len; + mav_array_memcpy(packet->data, data, sizeof(uint8_t)*64); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DATA64, (const char *)packet, MAVLINK_MSG_ID_DATA64_LEN, MAVLINK_MSG_ID_DATA64_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DATA64, (const char *)packet, MAVLINK_MSG_ID_DATA64_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE DATA64 UNPACKING diff --git a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_data96.h b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_data96.h index cffc7d7e7..634e3f81d 100644 --- a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_data96.h +++ b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_data96.h @@ -162,6 +162,40 @@ static inline void mavlink_msg_data96_send(mavlink_channel_t chan, uint8_t type, #endif } +#if MAVLINK_MSG_ID_DATA96_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_data96_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t type, uint8_t len, const uint8_t *data) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint8_t(buf, 0, type); + _mav_put_uint8_t(buf, 1, len); + _mav_put_uint8_t_array(buf, 2, data, 96); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DATA96, buf, MAVLINK_MSG_ID_DATA96_LEN, MAVLINK_MSG_ID_DATA96_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DATA96, buf, MAVLINK_MSG_ID_DATA96_LEN); +#endif +#else + mavlink_data96_t *packet = (mavlink_data96_t *)msgbuf; + packet->type = type; + packet->len = len; + mav_array_memcpy(packet->data, data, sizeof(uint8_t)*96); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DATA96, (const char *)packet, MAVLINK_MSG_ID_DATA96_LEN, MAVLINK_MSG_ID_DATA96_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DATA96, (const char *)packet, MAVLINK_MSG_ID_DATA96_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE DATA96 UNPACKING diff --git a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_digicam_configure.h b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_digicam_configure.h index c6518c419..d5f9e7132 100644 --- a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_digicam_configure.h +++ b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_digicam_configure.h @@ -256,6 +256,58 @@ static inline void mavlink_msg_digicam_configure_send(mavlink_channel_t chan, ui #endif } +#if MAVLINK_MSG_ID_DIGICAM_CONFIGURE_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_digicam_configure_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, uint8_t mode, uint16_t shutter_speed, uint8_t aperture, uint8_t iso, uint8_t exposure_type, uint8_t command_id, uint8_t engine_cut_off, uint8_t extra_param, float extra_value) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, extra_value); + _mav_put_uint16_t(buf, 4, shutter_speed); + _mav_put_uint8_t(buf, 6, target_system); + _mav_put_uint8_t(buf, 7, target_component); + _mav_put_uint8_t(buf, 8, mode); + _mav_put_uint8_t(buf, 9, aperture); + _mav_put_uint8_t(buf, 10, iso); + _mav_put_uint8_t(buf, 11, exposure_type); + _mav_put_uint8_t(buf, 12, command_id); + _mav_put_uint8_t(buf, 13, engine_cut_off); + _mav_put_uint8_t(buf, 14, extra_param); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DIGICAM_CONFIGURE, buf, MAVLINK_MSG_ID_DIGICAM_CONFIGURE_LEN, MAVLINK_MSG_ID_DIGICAM_CONFIGURE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DIGICAM_CONFIGURE, buf, MAVLINK_MSG_ID_DIGICAM_CONFIGURE_LEN); +#endif +#else + mavlink_digicam_configure_t *packet = (mavlink_digicam_configure_t *)msgbuf; + packet->extra_value = extra_value; + packet->shutter_speed = shutter_speed; + packet->target_system = target_system; + packet->target_component = target_component; + packet->mode = mode; + packet->aperture = aperture; + packet->iso = iso; + packet->exposure_type = exposure_type; + packet->command_id = command_id; + packet->engine_cut_off = engine_cut_off; + packet->extra_param = extra_param; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DIGICAM_CONFIGURE, (const char *)packet, MAVLINK_MSG_ID_DIGICAM_CONFIGURE_LEN, MAVLINK_MSG_ID_DIGICAM_CONFIGURE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DIGICAM_CONFIGURE, (const char *)packet, MAVLINK_MSG_ID_DIGICAM_CONFIGURE_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE DIGICAM_CONFIGURE UNPACKING diff --git a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_digicam_control.h b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_digicam_control.h index bfa5414a3..68484f7b8 100644 --- a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_digicam_control.h +++ b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_digicam_control.h @@ -245,6 +245,56 @@ static inline void mavlink_msg_digicam_control_send(mavlink_channel_t chan, uint #endif } +#if MAVLINK_MSG_ID_DIGICAM_CONTROL_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_digicam_control_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, uint8_t session, uint8_t zoom_pos, int8_t zoom_step, uint8_t focus_lock, uint8_t shot, uint8_t command_id, uint8_t extra_param, float extra_value) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, extra_value); + _mav_put_uint8_t(buf, 4, target_system); + _mav_put_uint8_t(buf, 5, target_component); + _mav_put_uint8_t(buf, 6, session); + _mav_put_uint8_t(buf, 7, zoom_pos); + _mav_put_int8_t(buf, 8, zoom_step); + _mav_put_uint8_t(buf, 9, focus_lock); + _mav_put_uint8_t(buf, 10, shot); + _mav_put_uint8_t(buf, 11, command_id); + _mav_put_uint8_t(buf, 12, extra_param); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DIGICAM_CONTROL, buf, MAVLINK_MSG_ID_DIGICAM_CONTROL_LEN, MAVLINK_MSG_ID_DIGICAM_CONTROL_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DIGICAM_CONTROL, buf, MAVLINK_MSG_ID_DIGICAM_CONTROL_LEN); +#endif +#else + mavlink_digicam_control_t *packet = (mavlink_digicam_control_t *)msgbuf; + packet->extra_value = extra_value; + packet->target_system = target_system; + packet->target_component = target_component; + packet->session = session; + packet->zoom_pos = zoom_pos; + packet->zoom_step = zoom_step; + packet->focus_lock = focus_lock; + packet->shot = shot; + packet->command_id = command_id; + packet->extra_param = extra_param; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DIGICAM_CONTROL, (const char *)packet, MAVLINK_MSG_ID_DIGICAM_CONTROL_LEN, MAVLINK_MSG_ID_DIGICAM_CONTROL_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DIGICAM_CONTROL, (const char *)packet, MAVLINK_MSG_ID_DIGICAM_CONTROL_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE DIGICAM_CONTROL UNPACKING diff --git a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_fence_fetch_point.h b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_fence_fetch_point.h index fe3677d53..4021c7a09 100644 --- a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_fence_fetch_point.h +++ b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_fence_fetch_point.h @@ -168,6 +168,42 @@ static inline void mavlink_msg_fence_fetch_point_send(mavlink_channel_t chan, ui #endif } +#if MAVLINK_MSG_ID_FENCE_FETCH_POINT_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_fence_fetch_point_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, uint8_t idx) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint8_t(buf, 0, target_system); + _mav_put_uint8_t(buf, 1, target_component); + _mav_put_uint8_t(buf, 2, idx); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FENCE_FETCH_POINT, buf, MAVLINK_MSG_ID_FENCE_FETCH_POINT_LEN, MAVLINK_MSG_ID_FENCE_FETCH_POINT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FENCE_FETCH_POINT, buf, MAVLINK_MSG_ID_FENCE_FETCH_POINT_LEN); +#endif +#else + mavlink_fence_fetch_point_t *packet = (mavlink_fence_fetch_point_t *)msgbuf; + packet->target_system = target_system; + packet->target_component = target_component; + packet->idx = idx; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FENCE_FETCH_POINT, (const char *)packet, MAVLINK_MSG_ID_FENCE_FETCH_POINT_LEN, MAVLINK_MSG_ID_FENCE_FETCH_POINT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FENCE_FETCH_POINT, (const char *)packet, MAVLINK_MSG_ID_FENCE_FETCH_POINT_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE FENCE_FETCH_POINT UNPACKING diff --git a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_fence_point.h b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_fence_point.h index febda6cdc..6fc2c83fc 100644 --- a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_fence_point.h +++ b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_fence_point.h @@ -201,6 +201,48 @@ static inline void mavlink_msg_fence_point_send(mavlink_channel_t chan, uint8_t #endif } +#if MAVLINK_MSG_ID_FENCE_POINT_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_fence_point_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, uint8_t idx, uint8_t count, float lat, float lng) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, lat); + _mav_put_float(buf, 4, lng); + _mav_put_uint8_t(buf, 8, target_system); + _mav_put_uint8_t(buf, 9, target_component); + _mav_put_uint8_t(buf, 10, idx); + _mav_put_uint8_t(buf, 11, count); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FENCE_POINT, buf, MAVLINK_MSG_ID_FENCE_POINT_LEN, MAVLINK_MSG_ID_FENCE_POINT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FENCE_POINT, buf, MAVLINK_MSG_ID_FENCE_POINT_LEN); +#endif +#else + mavlink_fence_point_t *packet = (mavlink_fence_point_t *)msgbuf; + packet->lat = lat; + packet->lng = lng; + packet->target_system = target_system; + packet->target_component = target_component; + packet->idx = idx; + packet->count = count; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FENCE_POINT, (const char *)packet, MAVLINK_MSG_ID_FENCE_POINT_LEN, MAVLINK_MSG_ID_FENCE_POINT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FENCE_POINT, (const char *)packet, MAVLINK_MSG_ID_FENCE_POINT_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE FENCE_POINT UNPACKING diff --git a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_fence_status.h b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_fence_status.h index 612090406..c50d37724 100644 --- a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_fence_status.h +++ b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_fence_status.h @@ -179,6 +179,44 @@ static inline void mavlink_msg_fence_status_send(mavlink_channel_t chan, uint8_t #endif } +#if MAVLINK_MSG_ID_FENCE_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_fence_status_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t breach_status, uint16_t breach_count, uint8_t breach_type, uint32_t breach_time) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, breach_time); + _mav_put_uint16_t(buf, 4, breach_count); + _mav_put_uint8_t(buf, 6, breach_status); + _mav_put_uint8_t(buf, 7, breach_type); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FENCE_STATUS, buf, MAVLINK_MSG_ID_FENCE_STATUS_LEN, MAVLINK_MSG_ID_FENCE_STATUS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FENCE_STATUS, buf, MAVLINK_MSG_ID_FENCE_STATUS_LEN); +#endif +#else + mavlink_fence_status_t *packet = (mavlink_fence_status_t *)msgbuf; + packet->breach_time = breach_time; + packet->breach_count = breach_count; + packet->breach_status = breach_status; + packet->breach_type = breach_type; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FENCE_STATUS, (const char *)packet, MAVLINK_MSG_ID_FENCE_STATUS_LEN, MAVLINK_MSG_ID_FENCE_STATUS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FENCE_STATUS, (const char *)packet, MAVLINK_MSG_ID_FENCE_STATUS_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE FENCE_STATUS UNPACKING diff --git a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_hwstatus.h b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_hwstatus.h index 2f5dea513..acf031f62 100644 --- a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_hwstatus.h +++ b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_hwstatus.h @@ -157,6 +157,40 @@ static inline void mavlink_msg_hwstatus_send(mavlink_channel_t chan, uint16_t Vc #endif } +#if MAVLINK_MSG_ID_HWSTATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_hwstatus_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint16_t Vcc, uint8_t I2Cerr) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint16_t(buf, 0, Vcc); + _mav_put_uint8_t(buf, 2, I2Cerr); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HWSTATUS, buf, MAVLINK_MSG_ID_HWSTATUS_LEN, MAVLINK_MSG_ID_HWSTATUS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HWSTATUS, buf, MAVLINK_MSG_ID_HWSTATUS_LEN); +#endif +#else + mavlink_hwstatus_t *packet = (mavlink_hwstatus_t *)msgbuf; + packet->Vcc = Vcc; + packet->I2Cerr = I2Cerr; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HWSTATUS, (const char *)packet, MAVLINK_MSG_ID_HWSTATUS_LEN, MAVLINK_MSG_ID_HWSTATUS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HWSTATUS, (const char *)packet, MAVLINK_MSG_ID_HWSTATUS_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE HWSTATUS UNPACKING diff --git a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_limits_status.h b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_limits_status.h index 34743fd02..5fef93718 100644 --- a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_limits_status.h +++ b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_limits_status.h @@ -234,6 +234,54 @@ static inline void mavlink_msg_limits_status_send(mavlink_channel_t chan, uint8_ #endif } +#if MAVLINK_MSG_ID_LIMITS_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_limits_status_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t limits_state, uint32_t last_trigger, uint32_t last_action, uint32_t last_recovery, uint32_t last_clear, uint16_t breach_count, uint8_t mods_enabled, uint8_t mods_required, uint8_t mods_triggered) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, last_trigger); + _mav_put_uint32_t(buf, 4, last_action); + _mav_put_uint32_t(buf, 8, last_recovery); + _mav_put_uint32_t(buf, 12, last_clear); + _mav_put_uint16_t(buf, 16, breach_count); + _mav_put_uint8_t(buf, 18, limits_state); + _mav_put_uint8_t(buf, 19, mods_enabled); + _mav_put_uint8_t(buf, 20, mods_required); + _mav_put_uint8_t(buf, 21, mods_triggered); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LIMITS_STATUS, buf, MAVLINK_MSG_ID_LIMITS_STATUS_LEN, MAVLINK_MSG_ID_LIMITS_STATUS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LIMITS_STATUS, buf, MAVLINK_MSG_ID_LIMITS_STATUS_LEN); +#endif +#else + mavlink_limits_status_t *packet = (mavlink_limits_status_t *)msgbuf; + packet->last_trigger = last_trigger; + packet->last_action = last_action; + packet->last_recovery = last_recovery; + packet->last_clear = last_clear; + packet->breach_count = breach_count; + packet->limits_state = limits_state; + packet->mods_enabled = mods_enabled; + packet->mods_required = mods_required; + packet->mods_triggered = mods_triggered; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LIMITS_STATUS, (const char *)packet, MAVLINK_MSG_ID_LIMITS_STATUS_LEN, MAVLINK_MSG_ID_LIMITS_STATUS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LIMITS_STATUS, (const char *)packet, MAVLINK_MSG_ID_LIMITS_STATUS_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE LIMITS_STATUS UNPACKING diff --git a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_meminfo.h b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_meminfo.h index 55f772bbc..c64b2e937 100644 --- a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_meminfo.h +++ b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_meminfo.h @@ -157,6 +157,40 @@ static inline void mavlink_msg_meminfo_send(mavlink_channel_t chan, uint16_t brk #endif } +#if MAVLINK_MSG_ID_MEMINFO_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_meminfo_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint16_t brkval, uint16_t freemem) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint16_t(buf, 0, brkval); + _mav_put_uint16_t(buf, 2, freemem); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MEMINFO, buf, MAVLINK_MSG_ID_MEMINFO_LEN, MAVLINK_MSG_ID_MEMINFO_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MEMINFO, buf, MAVLINK_MSG_ID_MEMINFO_LEN); +#endif +#else + mavlink_meminfo_t *packet = (mavlink_meminfo_t *)msgbuf; + packet->brkval = brkval; + packet->freemem = freemem; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MEMINFO, (const char *)packet, MAVLINK_MSG_ID_MEMINFO_LEN, MAVLINK_MSG_ID_MEMINFO_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MEMINFO, (const char *)packet, MAVLINK_MSG_ID_MEMINFO_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE MEMINFO UNPACKING diff --git a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_mount_configure.h b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_mount_configure.h index de717dfa4..350bb0b78 100644 --- a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_mount_configure.h +++ b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_mount_configure.h @@ -201,6 +201,48 @@ static inline void mavlink_msg_mount_configure_send(mavlink_channel_t chan, uint #endif } +#if MAVLINK_MSG_ID_MOUNT_CONFIGURE_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_mount_configure_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, uint8_t mount_mode, uint8_t stab_roll, uint8_t stab_pitch, uint8_t stab_yaw) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint8_t(buf, 0, target_system); + _mav_put_uint8_t(buf, 1, target_component); + _mav_put_uint8_t(buf, 2, mount_mode); + _mav_put_uint8_t(buf, 3, stab_roll); + _mav_put_uint8_t(buf, 4, stab_pitch); + _mav_put_uint8_t(buf, 5, stab_yaw); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MOUNT_CONFIGURE, buf, MAVLINK_MSG_ID_MOUNT_CONFIGURE_LEN, MAVLINK_MSG_ID_MOUNT_CONFIGURE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MOUNT_CONFIGURE, buf, MAVLINK_MSG_ID_MOUNT_CONFIGURE_LEN); +#endif +#else + mavlink_mount_configure_t *packet = (mavlink_mount_configure_t *)msgbuf; + packet->target_system = target_system; + packet->target_component = target_component; + packet->mount_mode = mount_mode; + packet->stab_roll = stab_roll; + packet->stab_pitch = stab_pitch; + packet->stab_yaw = stab_yaw; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MOUNT_CONFIGURE, (const char *)packet, MAVLINK_MSG_ID_MOUNT_CONFIGURE_LEN, MAVLINK_MSG_ID_MOUNT_CONFIGURE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MOUNT_CONFIGURE, (const char *)packet, MAVLINK_MSG_ID_MOUNT_CONFIGURE_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE MOUNT_CONFIGURE UNPACKING diff --git a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_mount_control.h b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_mount_control.h index 44416353e..72d6e2419 100644 --- a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_mount_control.h +++ b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_mount_control.h @@ -201,6 +201,48 @@ static inline void mavlink_msg_mount_control_send(mavlink_channel_t chan, uint8_ #endif } +#if MAVLINK_MSG_ID_MOUNT_CONTROL_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_mount_control_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, int32_t input_a, int32_t input_b, int32_t input_c, uint8_t save_position) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_int32_t(buf, 0, input_a); + _mav_put_int32_t(buf, 4, input_b); + _mav_put_int32_t(buf, 8, input_c); + _mav_put_uint8_t(buf, 12, target_system); + _mav_put_uint8_t(buf, 13, target_component); + _mav_put_uint8_t(buf, 14, save_position); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MOUNT_CONTROL, buf, MAVLINK_MSG_ID_MOUNT_CONTROL_LEN, MAVLINK_MSG_ID_MOUNT_CONTROL_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MOUNT_CONTROL, buf, MAVLINK_MSG_ID_MOUNT_CONTROL_LEN); +#endif +#else + mavlink_mount_control_t *packet = (mavlink_mount_control_t *)msgbuf; + packet->input_a = input_a; + packet->input_b = input_b; + packet->input_c = input_c; + packet->target_system = target_system; + packet->target_component = target_component; + packet->save_position = save_position; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MOUNT_CONTROL, (const char *)packet, MAVLINK_MSG_ID_MOUNT_CONTROL_LEN, MAVLINK_MSG_ID_MOUNT_CONTROL_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MOUNT_CONTROL, (const char *)packet, MAVLINK_MSG_ID_MOUNT_CONTROL_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE MOUNT_CONTROL UNPACKING diff --git a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_mount_status.h b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_mount_status.h index 4905905dc..c140dd2c7 100644 --- a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_mount_status.h +++ b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_mount_status.h @@ -190,6 +190,46 @@ static inline void mavlink_msg_mount_status_send(mavlink_channel_t chan, uint8_t #endif } +#if MAVLINK_MSG_ID_MOUNT_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_mount_status_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, int32_t pointing_a, int32_t pointing_b, int32_t pointing_c) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_int32_t(buf, 0, pointing_a); + _mav_put_int32_t(buf, 4, pointing_b); + _mav_put_int32_t(buf, 8, pointing_c); + _mav_put_uint8_t(buf, 12, target_system); + _mav_put_uint8_t(buf, 13, target_component); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MOUNT_STATUS, buf, MAVLINK_MSG_ID_MOUNT_STATUS_LEN, MAVLINK_MSG_ID_MOUNT_STATUS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MOUNT_STATUS, buf, MAVLINK_MSG_ID_MOUNT_STATUS_LEN); +#endif +#else + mavlink_mount_status_t *packet = (mavlink_mount_status_t *)msgbuf; + packet->pointing_a = pointing_a; + packet->pointing_b = pointing_b; + packet->pointing_c = pointing_c; + packet->target_system = target_system; + packet->target_component = target_component; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MOUNT_STATUS, (const char *)packet, MAVLINK_MSG_ID_MOUNT_STATUS_LEN, MAVLINK_MSG_ID_MOUNT_STATUS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MOUNT_STATUS, (const char *)packet, MAVLINK_MSG_ID_MOUNT_STATUS_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE MOUNT_STATUS UNPACKING diff --git a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_radio.h b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_radio.h index 8e9740e82..830eb4639 100644 --- a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_radio.h +++ b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_radio.h @@ -212,6 +212,50 @@ static inline void mavlink_msg_radio_send(mavlink_channel_t chan, uint8_t rssi, #endif } +#if MAVLINK_MSG_ID_RADIO_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_radio_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t rssi, uint8_t remrssi, uint8_t txbuf, uint8_t noise, uint8_t remnoise, uint16_t rxerrors, uint16_t fixed) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint16_t(buf, 0, rxerrors); + _mav_put_uint16_t(buf, 2, fixed); + _mav_put_uint8_t(buf, 4, rssi); + _mav_put_uint8_t(buf, 5, remrssi); + _mav_put_uint8_t(buf, 6, txbuf); + _mav_put_uint8_t(buf, 7, noise); + _mav_put_uint8_t(buf, 8, remnoise); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RADIO, buf, MAVLINK_MSG_ID_RADIO_LEN, MAVLINK_MSG_ID_RADIO_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RADIO, buf, MAVLINK_MSG_ID_RADIO_LEN); +#endif +#else + mavlink_radio_t *packet = (mavlink_radio_t *)msgbuf; + packet->rxerrors = rxerrors; + packet->fixed = fixed; + packet->rssi = rssi; + packet->remrssi = remrssi; + packet->txbuf = txbuf; + packet->noise = noise; + packet->remnoise = remnoise; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RADIO, (const char *)packet, MAVLINK_MSG_ID_RADIO_LEN, MAVLINK_MSG_ID_RADIO_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RADIO, (const char *)packet, MAVLINK_MSG_ID_RADIO_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE RADIO UNPACKING diff --git a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_rally_fetch_point.h b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_rally_fetch_point.h index f057e3c33..4598251fe 100644 --- a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_rally_fetch_point.h +++ b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_rally_fetch_point.h @@ -168,6 +168,42 @@ static inline void mavlink_msg_rally_fetch_point_send(mavlink_channel_t chan, ui #endif } +#if MAVLINK_MSG_ID_RALLY_FETCH_POINT_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_rally_fetch_point_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, uint8_t idx) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint8_t(buf, 0, target_system); + _mav_put_uint8_t(buf, 1, target_component); + _mav_put_uint8_t(buf, 2, idx); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RALLY_FETCH_POINT, buf, MAVLINK_MSG_ID_RALLY_FETCH_POINT_LEN, MAVLINK_MSG_ID_RALLY_FETCH_POINT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RALLY_FETCH_POINT, buf, MAVLINK_MSG_ID_RALLY_FETCH_POINT_LEN); +#endif +#else + mavlink_rally_fetch_point_t *packet = (mavlink_rally_fetch_point_t *)msgbuf; + packet->target_system = target_system; + packet->target_component = target_component; + packet->idx = idx; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RALLY_FETCH_POINT, (const char *)packet, MAVLINK_MSG_ID_RALLY_FETCH_POINT_LEN, MAVLINK_MSG_ID_RALLY_FETCH_POINT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RALLY_FETCH_POINT, (const char *)packet, MAVLINK_MSG_ID_RALLY_FETCH_POINT_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE RALLY_FETCH_POINT UNPACKING diff --git a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_rally_point.h b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_rally_point.h index 2c21db4c0..b44e764a9 100644 --- a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_rally_point.h +++ b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_rally_point.h @@ -245,6 +245,56 @@ static inline void mavlink_msg_rally_point_send(mavlink_channel_t chan, uint8_t #endif } +#if MAVLINK_MSG_ID_RALLY_POINT_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_rally_point_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, uint8_t idx, uint8_t count, int32_t lat, int32_t lng, int16_t alt, int16_t break_alt, uint16_t land_dir, uint8_t flags) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_int32_t(buf, 0, lat); + _mav_put_int32_t(buf, 4, lng); + _mav_put_int16_t(buf, 8, alt); + _mav_put_int16_t(buf, 10, break_alt); + _mav_put_uint16_t(buf, 12, land_dir); + _mav_put_uint8_t(buf, 14, target_system); + _mav_put_uint8_t(buf, 15, target_component); + _mav_put_uint8_t(buf, 16, idx); + _mav_put_uint8_t(buf, 17, count); + _mav_put_uint8_t(buf, 18, flags); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RALLY_POINT, buf, MAVLINK_MSG_ID_RALLY_POINT_LEN, MAVLINK_MSG_ID_RALLY_POINT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RALLY_POINT, buf, MAVLINK_MSG_ID_RALLY_POINT_LEN); +#endif +#else + mavlink_rally_point_t *packet = (mavlink_rally_point_t *)msgbuf; + packet->lat = lat; + packet->lng = lng; + packet->alt = alt; + packet->break_alt = break_alt; + packet->land_dir = land_dir; + packet->target_system = target_system; + packet->target_component = target_component; + packet->idx = idx; + packet->count = count; + packet->flags = flags; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RALLY_POINT, (const char *)packet, MAVLINK_MSG_ID_RALLY_POINT_LEN, MAVLINK_MSG_ID_RALLY_POINT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RALLY_POINT, (const char *)packet, MAVLINK_MSG_ID_RALLY_POINT_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE RALLY_POINT UNPACKING diff --git a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_rangefinder.h b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_rangefinder.h index c476447a8..464ce8a47 100644 --- a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_rangefinder.h +++ b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_rangefinder.h @@ -157,6 +157,40 @@ static inline void mavlink_msg_rangefinder_send(mavlink_channel_t chan, float di #endif } +#if MAVLINK_MSG_ID_RANGEFINDER_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_rangefinder_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, float distance, float voltage) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, distance); + _mav_put_float(buf, 4, voltage); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RANGEFINDER, buf, MAVLINK_MSG_ID_RANGEFINDER_LEN, MAVLINK_MSG_ID_RANGEFINDER_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RANGEFINDER, buf, MAVLINK_MSG_ID_RANGEFINDER_LEN); +#endif +#else + mavlink_rangefinder_t *packet = (mavlink_rangefinder_t *)msgbuf; + packet->distance = distance; + packet->voltage = voltage; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RANGEFINDER, (const char *)packet, MAVLINK_MSG_ID_RANGEFINDER_LEN, MAVLINK_MSG_ID_RANGEFINDER_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RANGEFINDER, (const char *)packet, MAVLINK_MSG_ID_RANGEFINDER_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE RANGEFINDER UNPACKING diff --git a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_sensor_offsets.h b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_sensor_offsets.h index 31b7d989d..d18f31c95 100644 --- a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_sensor_offsets.h +++ b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_sensor_offsets.h @@ -267,6 +267,60 @@ static inline void mavlink_msg_sensor_offsets_send(mavlink_channel_t chan, int16 #endif } +#if MAVLINK_MSG_ID_SENSOR_OFFSETS_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_sensor_offsets_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, int16_t mag_ofs_x, int16_t mag_ofs_y, int16_t mag_ofs_z, float mag_declination, int32_t raw_press, int32_t raw_temp, float gyro_cal_x, float gyro_cal_y, float gyro_cal_z, float accel_cal_x, float accel_cal_y, float accel_cal_z) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, mag_declination); + _mav_put_int32_t(buf, 4, raw_press); + _mav_put_int32_t(buf, 8, raw_temp); + _mav_put_float(buf, 12, gyro_cal_x); + _mav_put_float(buf, 16, gyro_cal_y); + _mav_put_float(buf, 20, gyro_cal_z); + _mav_put_float(buf, 24, accel_cal_x); + _mav_put_float(buf, 28, accel_cal_y); + _mav_put_float(buf, 32, accel_cal_z); + _mav_put_int16_t(buf, 36, mag_ofs_x); + _mav_put_int16_t(buf, 38, mag_ofs_y); + _mav_put_int16_t(buf, 40, mag_ofs_z); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SENSOR_OFFSETS, buf, MAVLINK_MSG_ID_SENSOR_OFFSETS_LEN, MAVLINK_MSG_ID_SENSOR_OFFSETS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SENSOR_OFFSETS, buf, MAVLINK_MSG_ID_SENSOR_OFFSETS_LEN); +#endif +#else + mavlink_sensor_offsets_t *packet = (mavlink_sensor_offsets_t *)msgbuf; + packet->mag_declination = mag_declination; + packet->raw_press = raw_press; + packet->raw_temp = raw_temp; + packet->gyro_cal_x = gyro_cal_x; + packet->gyro_cal_y = gyro_cal_y; + packet->gyro_cal_z = gyro_cal_z; + packet->accel_cal_x = accel_cal_x; + packet->accel_cal_y = accel_cal_y; + packet->accel_cal_z = accel_cal_z; + packet->mag_ofs_x = mag_ofs_x; + packet->mag_ofs_y = mag_ofs_y; + packet->mag_ofs_z = mag_ofs_z; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SENSOR_OFFSETS, (const char *)packet, MAVLINK_MSG_ID_SENSOR_OFFSETS_LEN, MAVLINK_MSG_ID_SENSOR_OFFSETS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SENSOR_OFFSETS, (const char *)packet, MAVLINK_MSG_ID_SENSOR_OFFSETS_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SENSOR_OFFSETS UNPACKING diff --git a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_set_mag_offsets.h b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_set_mag_offsets.h index b2c629c39..fc6aa71e0 100644 --- a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_set_mag_offsets.h +++ b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_set_mag_offsets.h @@ -190,6 +190,46 @@ static inline void mavlink_msg_set_mag_offsets_send(mavlink_channel_t chan, uint #endif } +#if MAVLINK_MSG_ID_SET_MAG_OFFSETS_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_set_mag_offsets_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, int16_t mag_ofs_x, int16_t mag_ofs_y, int16_t mag_ofs_z) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_int16_t(buf, 0, mag_ofs_x); + _mav_put_int16_t(buf, 2, mag_ofs_y); + _mav_put_int16_t(buf, 4, mag_ofs_z); + _mav_put_uint8_t(buf, 6, target_system); + _mav_put_uint8_t(buf, 7, target_component); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_MAG_OFFSETS, buf, MAVLINK_MSG_ID_SET_MAG_OFFSETS_LEN, MAVLINK_MSG_ID_SET_MAG_OFFSETS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_MAG_OFFSETS, buf, MAVLINK_MSG_ID_SET_MAG_OFFSETS_LEN); +#endif +#else + mavlink_set_mag_offsets_t *packet = (mavlink_set_mag_offsets_t *)msgbuf; + packet->mag_ofs_x = mag_ofs_x; + packet->mag_ofs_y = mag_ofs_y; + packet->mag_ofs_z = mag_ofs_z; + packet->target_system = target_system; + packet->target_component = target_component; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_MAG_OFFSETS, (const char *)packet, MAVLINK_MSG_ID_SET_MAG_OFFSETS_LEN, MAVLINK_MSG_ID_SET_MAG_OFFSETS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_MAG_OFFSETS, (const char *)packet, MAVLINK_MSG_ID_SET_MAG_OFFSETS_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SET_MAG_OFFSETS UNPACKING diff --git a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_simstate.h b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_simstate.h index 8ef44f76d..48cfb6ffd 100644 --- a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_simstate.h +++ b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_simstate.h @@ -256,6 +256,58 @@ static inline void mavlink_msg_simstate_send(mavlink_channel_t chan, float roll, #endif } +#if MAVLINK_MSG_ID_SIMSTATE_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_simstate_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, float roll, float pitch, float yaw, float xacc, float yacc, float zacc, float xgyro, float ygyro, float zgyro, int32_t lat, int32_t lng) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, roll); + _mav_put_float(buf, 4, pitch); + _mav_put_float(buf, 8, yaw); + _mav_put_float(buf, 12, xacc); + _mav_put_float(buf, 16, yacc); + _mav_put_float(buf, 20, zacc); + _mav_put_float(buf, 24, xgyro); + _mav_put_float(buf, 28, ygyro); + _mav_put_float(buf, 32, zgyro); + _mav_put_int32_t(buf, 36, lat); + _mav_put_int32_t(buf, 40, lng); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SIMSTATE, buf, MAVLINK_MSG_ID_SIMSTATE_LEN, MAVLINK_MSG_ID_SIMSTATE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SIMSTATE, buf, MAVLINK_MSG_ID_SIMSTATE_LEN); +#endif +#else + mavlink_simstate_t *packet = (mavlink_simstate_t *)msgbuf; + packet->roll = roll; + packet->pitch = pitch; + packet->yaw = yaw; + packet->xacc = xacc; + packet->yacc = yacc; + packet->zacc = zacc; + packet->xgyro = xgyro; + packet->ygyro = ygyro; + packet->zgyro = zgyro; + packet->lat = lat; + packet->lng = lng; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SIMSTATE, (const char *)packet, MAVLINK_MSG_ID_SIMSTATE_LEN, MAVLINK_MSG_ID_SIMSTATE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SIMSTATE, (const char *)packet, MAVLINK_MSG_ID_SIMSTATE_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SIMSTATE UNPACKING diff --git a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_wind.h b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_wind.h index 7608a7bd1..5d5edc4cc 100644 --- a/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_wind.h +++ b/mavlink/include/mavlink/v1.0/ardupilotmega/mavlink_msg_wind.h @@ -168,6 +168,42 @@ static inline void mavlink_msg_wind_send(mavlink_channel_t chan, float direction #endif } +#if MAVLINK_MSG_ID_WIND_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_wind_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, float direction, float speed, float speed_z) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, direction); + _mav_put_float(buf, 4, speed); + _mav_put_float(buf, 8, speed_z); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_WIND, buf, MAVLINK_MSG_ID_WIND_LEN, MAVLINK_MSG_ID_WIND_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_WIND, buf, MAVLINK_MSG_ID_WIND_LEN); +#endif +#else + mavlink_wind_t *packet = (mavlink_wind_t *)msgbuf; + packet->direction = direction; + packet->speed = speed; + packet->speed_z = speed_z; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_WIND, (const char *)packet, MAVLINK_MSG_ID_WIND_LEN, MAVLINK_MSG_ID_WIND_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_WIND, (const char *)packet, MAVLINK_MSG_ID_WIND_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE WIND UNPACKING diff --git a/mavlink/include/mavlink/v1.0/ardupilotmega/testsuite.h b/mavlink/include/mavlink/v1.0/ardupilotmega/testsuite.h index b2496334f..489553ea4 100644 --- a/mavlink/include/mavlink/v1.0/ardupilotmega/testsuite.h +++ b/mavlink/include/mavlink/v1.0/ardupilotmega/testsuite.h @@ -1398,6 +1398,59 @@ static void mavlink_test_rally_fetch_point(uint8_t system_id, uint8_t component_ MAVLINK_ASSERT(memcmp(&packet1, &packet2, sizeof(packet1)) == 0); } +static void mavlink_test_compassmot_status(uint8_t system_id, uint8_t component_id, mavlink_message_t *last_msg) +{ + mavlink_message_t msg; + uint8_t buffer[MAVLINK_MAX_PACKET_LEN]; + uint16_t i; + mavlink_compassmot_status_t packet_in = { + 17.0, + }45.0, + }73.0, + }101.0, + }18067, + }18171, + }; + mavlink_compassmot_status_t packet1, packet2; + memset(&packet1, 0, sizeof(packet1)); + packet1.current = packet_in.current; + packet1.CompensationX = packet_in.CompensationX; + packet1.CompensationY = packet_in.CompensationY; + packet1.CompensationZ = packet_in.CompensationZ; + packet1.throttle = packet_in.throttle; + packet1.interference = packet_in.interference; + + + + memset(&packet2, 0, sizeof(packet2)); + mavlink_msg_compassmot_status_encode(system_id, component_id, &msg, &packet1); + mavlink_msg_compassmot_status_decode(&msg, &packet2); + MAVLINK_ASSERT(memcmp(&packet1, &packet2, sizeof(packet1)) == 0); + + memset(&packet2, 0, sizeof(packet2)); + mavlink_msg_compassmot_status_pack(system_id, component_id, &msg , packet1.throttle , packet1.current , packet1.interference , packet1.CompensationX , packet1.CompensationY , packet1.CompensationZ ); + mavlink_msg_compassmot_status_decode(&msg, &packet2); + MAVLINK_ASSERT(memcmp(&packet1, &packet2, sizeof(packet1)) == 0); + + memset(&packet2, 0, sizeof(packet2)); + mavlink_msg_compassmot_status_pack_chan(system_id, component_id, MAVLINK_COMM_0, &msg , packet1.throttle , packet1.current , packet1.interference , packet1.CompensationX , packet1.CompensationY , packet1.CompensationZ ); + mavlink_msg_compassmot_status_decode(&msg, &packet2); + MAVLINK_ASSERT(memcmp(&packet1, &packet2, sizeof(packet1)) == 0); + + memset(&packet2, 0, sizeof(packet2)); + mavlink_msg_to_send_buffer(buffer, &msg); + for (i=0; i<mavlink_msg_get_send_buffer_length(&msg); i++) { + comm_send_ch(MAVLINK_COMM_0, buffer[i]); + } + mavlink_msg_compassmot_status_decode(last_msg, &packet2); + MAVLINK_ASSERT(memcmp(&packet1, &packet2, sizeof(packet1)) == 0); + + memset(&packet2, 0, sizeof(packet2)); + mavlink_msg_compassmot_status_send(MAVLINK_COMM_1 , packet1.throttle , packet1.current , packet1.interference , packet1.CompensationX , packet1.CompensationY , packet1.CompensationZ ); + mavlink_msg_compassmot_status_decode(last_msg, &packet2); + MAVLINK_ASSERT(memcmp(&packet1, &packet2, sizeof(packet1)) == 0); +} + static void mavlink_test_ahrs2(uint8_t system_id, uint8_t component_id, mavlink_message_t *last_msg) { mavlink_message_t msg; @@ -1479,6 +1532,7 @@ static void mavlink_test_ardupilotmega(uint8_t system_id, uint8_t component_id, mavlink_test_airspeed_autocal(system_id, component_id, last_msg); mavlink_test_rally_point(system_id, component_id, last_msg); mavlink_test_rally_fetch_point(system_id, component_id, last_msg); + mavlink_test_compassmot_status(system_id, component_id, last_msg); mavlink_test_ahrs2(system_id, component_id, last_msg); } diff --git a/mavlink/include/mavlink/v1.0/ardupilotmega/version.h b/mavlink/include/mavlink/v1.0/ardupilotmega/version.h index 983237eb5..1892fffb3 100644 --- a/mavlink/include/mavlink/v1.0/ardupilotmega/version.h +++ b/mavlink/include/mavlink/v1.0/ardupilotmega/version.h @@ -5,7 +5,7 @@ #ifndef MAVLINK_VERSION_H #define MAVLINK_VERSION_H -#define MAVLINK_BUILD_DATE "Tue Feb 4 15:27:33 2014" +#define MAVLINK_BUILD_DATE "Sun Apr 13 09:37:48 2014" #define MAVLINK_WIRE_PROTOCOL_VERSION "1.0" #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255 diff --git a/mavlink/include/mavlink/v1.0/autoquad/autoquad.h b/mavlink/include/mavlink/v1.0/autoquad/autoquad.h index b4dde669f..93e868dc3 100644 --- a/mavlink/include/mavlink/v1.0/autoquad/autoquad.h +++ b/mavlink/include/mavlink/v1.0/autoquad/autoquad.h @@ -12,15 +12,15 @@ extern "C" { // MESSAGE LENGTHS AND CRCS #ifndef MAVLINK_MESSAGE_LENGTHS -#define MAVLINK_MESSAGE_LENGTHS {9, 31, 12, 0, 14, 28, 3, 32, 0, 0, 0, 6, 0, 0, 0, 0, 0, 0, 0, 0, 20, 2, 25, 23, 30, 101, 22, 26, 16, 14, 28, 32, 28, 28, 22, 22, 21, 6, 6, 37, 4, 4, 2, 2, 4, 2, 2, 3, 13, 12, 19, 17, 15, 15, 27, 25, 18, 18, 20, 20, 9, 34, 26, 46, 36, 0, 6, 4, 0, 11, 18, 0, 0, 0, 20, 0, 33, 3, 0, 0, 20, 22, 0, 0, 0, 0, 0, 0, 0, 28, 56, 42, 33, 0, 0, 0, 0, 0, 0, 0, 26, 32, 32, 20, 32, 62, 54, 64, 84, 9, 254, 249, 9, 36, 26, 64, 22, 6, 14, 12, 97, 2, 2, 113, 35, 0, 0, 0, 0, 0, 13, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 24, 33, 25, 82, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 36, 30, 18, 18, 51, 9, 0} +#define MAVLINK_MESSAGE_LENGTHS {9, 31, 12, 0, 14, 28, 3, 32, 0, 0, 0, 6, 0, 0, 0, 0, 0, 0, 0, 0, 20, 2, 25, 23, 30, 101, 22, 26, 16, 14, 28, 32, 28, 28, 22, 22, 21, 6, 6, 37, 4, 4, 2, 2, 4, 2, 2, 3, 13, 12, 19, 17, 15, 15, 27, 25, 18, 18, 20, 20, 9, 34, 26, 46, 36, 42, 6, 4, 0, 11, 18, 0, 0, 0, 20, 0, 33, 3, 0, 0, 20, 22, 0, 0, 0, 0, 0, 0, 0, 28, 56, 42, 33, 0, 0, 0, 0, 0, 0, 0, 26, 32, 32, 20, 32, 62, 54, 64, 84, 9, 254, 249, 9, 36, 26, 64, 22, 6, 14, 12, 97, 2, 2, 113, 35, 6, 79, 0, 0, 0, 13, 255, 14, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 24, 33, 25, 82, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 36, 30, 18, 18, 51, 9, 0} #endif #ifndef MAVLINK_MESSAGE_CRCS -#define MAVLINK_MESSAGE_CRCS {50, 124, 137, 0, 237, 217, 104, 119, 0, 0, 0, 89, 0, 0, 0, 0, 0, 0, 0, 0, 214, 159, 220, 168, 24, 23, 170, 144, 67, 115, 39, 246, 185, 104, 237, 244, 222, 212, 9, 254, 230, 28, 28, 132, 221, 232, 11, 153, 41, 39, 214, 223, 141, 33, 15, 3, 100, 24, 239, 238, 30, 240, 183, 130, 130, 0, 148, 21, 0, 243, 124, 0, 0, 0, 20, 0, 152, 143, 0, 0, 127, 106, 0, 0, 0, 0, 0, 0, 0, 231, 183, 63, 54, 0, 0, 0, 0, 0, 0, 0, 175, 102, 158, 208, 56, 93, 211, 108, 32, 185, 235, 93, 124, 124, 119, 4, 76, 128, 56, 116, 134, 237, 203, 250, 87, 0, 0, 0, 0, 0, 29, 223, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 177, 241, 15, 241, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 204, 49, 170, 44, 83, 46, 0} +#define MAVLINK_MESSAGE_CRCS {50, 124, 137, 0, 237, 217, 104, 119, 0, 0, 0, 89, 0, 0, 0, 0, 0, 0, 0, 0, 214, 159, 220, 168, 24, 23, 170, 144, 67, 115, 39, 246, 185, 104, 237, 244, 222, 212, 9, 254, 230, 28, 28, 132, 221, 232, 11, 153, 41, 39, 214, 223, 141, 33, 15, 3, 100, 24, 239, 238, 30, 240, 183, 130, 130, 118, 148, 21, 0, 243, 124, 0, 0, 0, 20, 0, 152, 143, 0, 0, 127, 106, 0, 0, 0, 0, 0, 0, 0, 231, 183, 63, 54, 0, 0, 0, 0, 0, 0, 0, 175, 102, 158, 208, 56, 93, 211, 108, 32, 185, 235, 93, 124, 124, 119, 4, 76, 128, 56, 116, 134, 237, 203, 250, 87, 203, 220, 0, 0, 0, 29, 223, 85, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 177, 241, 15, 241, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 204, 49, 170, 44, 83, 46, 0} #endif #ifndef MAVLINK_MESSAGE_INFO -#define MAVLINK_MESSAGE_INFO {MAVLINK_MESSAGE_INFO_HEARTBEAT, MAVLINK_MESSAGE_INFO_SYS_STATUS, MAVLINK_MESSAGE_INFO_SYSTEM_TIME, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_PING, MAVLINK_MESSAGE_INFO_CHANGE_OPERATOR_CONTROL, MAVLINK_MESSAGE_INFO_CHANGE_OPERATOR_CONTROL_ACK, MAVLINK_MESSAGE_INFO_AUTH_KEY, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_SET_MODE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_PARAM_REQUEST_READ, MAVLINK_MESSAGE_INFO_PARAM_REQUEST_LIST, MAVLINK_MESSAGE_INFO_PARAM_VALUE, MAVLINK_MESSAGE_INFO_PARAM_SET, MAVLINK_MESSAGE_INFO_GPS_RAW_INT, MAVLINK_MESSAGE_INFO_GPS_STATUS, MAVLINK_MESSAGE_INFO_SCALED_IMU, MAVLINK_MESSAGE_INFO_RAW_IMU, MAVLINK_MESSAGE_INFO_RAW_PRESSURE, MAVLINK_MESSAGE_INFO_SCALED_PRESSURE, MAVLINK_MESSAGE_INFO_ATTITUDE, MAVLINK_MESSAGE_INFO_ATTITUDE_QUATERNION, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED, MAVLINK_MESSAGE_INFO_GLOBAL_POSITION_INT, MAVLINK_MESSAGE_INFO_RC_CHANNELS_SCALED, MAVLINK_MESSAGE_INFO_RC_CHANNELS_RAW, MAVLINK_MESSAGE_INFO_SERVO_OUTPUT_RAW, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_PARTIAL_LIST, MAVLINK_MESSAGE_INFO_MISSION_WRITE_PARTIAL_LIST, MAVLINK_MESSAGE_INFO_MISSION_ITEM, MAVLINK_MESSAGE_INFO_MISSION_REQUEST, MAVLINK_MESSAGE_INFO_MISSION_SET_CURRENT, MAVLINK_MESSAGE_INFO_MISSION_CURRENT, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_LIST, MAVLINK_MESSAGE_INFO_MISSION_COUNT, MAVLINK_MESSAGE_INFO_MISSION_CLEAR_ALL, MAVLINK_MESSAGE_INFO_MISSION_ITEM_REACHED, MAVLINK_MESSAGE_INFO_MISSION_ACK, MAVLINK_MESSAGE_INFO_SET_GPS_GLOBAL_ORIGIN, MAVLINK_MESSAGE_INFO_GPS_GLOBAL_ORIGIN, MAVLINK_MESSAGE_INFO_SET_LOCAL_POSITION_SETPOINT, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_SETPOINT, MAVLINK_MESSAGE_INFO_GLOBAL_POSITION_SETPOINT_INT, MAVLINK_MESSAGE_INFO_SET_GLOBAL_POSITION_SETPOINT_INT, MAVLINK_MESSAGE_INFO_SAFETY_SET_ALLOWED_AREA, MAVLINK_MESSAGE_INFO_SAFETY_ALLOWED_AREA, MAVLINK_MESSAGE_INFO_SET_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_SET_ROLL_PITCH_YAW_SPEED_THRUST, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_SPEED_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_SET_QUAD_MOTORS_SETPOINT, MAVLINK_MESSAGE_INFO_SET_QUAD_SWARM_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_NAV_CONTROLLER_OUTPUT, MAVLINK_MESSAGE_INFO_SET_QUAD_SWARM_LED_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_STATE_CORRECTION, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_REQUEST_DATA_STREAM, MAVLINK_MESSAGE_INFO_DATA_STREAM, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_MANUAL_CONTROL, MAVLINK_MESSAGE_INFO_RC_CHANNELS_OVERRIDE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_VFR_HUD, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_COMMAND_LONG, MAVLINK_MESSAGE_INFO_COMMAND_ACK, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_RATES_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_MANUAL_SETPOINT, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED_SYSTEM_GLOBAL_OFFSET, MAVLINK_MESSAGE_INFO_HIL_STATE, MAVLINK_MESSAGE_INFO_HIL_CONTROLS, MAVLINK_MESSAGE_INFO_HIL_RC_INPUTS_RAW, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_OPTICAL_FLOW, MAVLINK_MESSAGE_INFO_GLOBAL_VISION_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_VISION_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_VISION_SPEED_ESTIMATE, MAVLINK_MESSAGE_INFO_VICON_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_HIGHRES_IMU, MAVLINK_MESSAGE_INFO_OMNIDIRECTIONAL_FLOW, MAVLINK_MESSAGE_INFO_HIL_SENSOR, MAVLINK_MESSAGE_INFO_SIM_STATE, MAVLINK_MESSAGE_INFO_RADIO_STATUS, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_START, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_DIR_LIST, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_RES, MAVLINK_MESSAGE_INFO_HIL_GPS, MAVLINK_MESSAGE_INFO_HIL_OPTICAL_FLOW, MAVLINK_MESSAGE_INFO_HIL_STATE_QUATERNION, MAVLINK_MESSAGE_INFO_SCALED_IMU2, MAVLINK_MESSAGE_INFO_LOG_REQUEST_LIST, MAVLINK_MESSAGE_INFO_LOG_ENTRY, MAVLINK_MESSAGE_INFO_LOG_REQUEST_DATA, MAVLINK_MESSAGE_INFO_LOG_DATA, MAVLINK_MESSAGE_INFO_LOG_ERASE, MAVLINK_MESSAGE_INFO_LOG_REQUEST_END, MAVLINK_MESSAGE_INFO_GPS_INJECT_DATA, MAVLINK_MESSAGE_INFO_GPS2_RAW, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_DATA_TRANSMISSION_HANDSHAKE, MAVLINK_MESSAGE_INFO_ENCAPSULATED_DATA, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_BATTERY_STATUS, MAVLINK_MESSAGE_INFO_SETPOINT_8DOF, MAVLINK_MESSAGE_INFO_SETPOINT_6DOF, MAVLINK_MESSAGE_INFO_AQ_TELEMETRY_F, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_MEMORY_VECT, MAVLINK_MESSAGE_INFO_DEBUG_VECT, MAVLINK_MESSAGE_INFO_NAMED_VALUE_FLOAT, MAVLINK_MESSAGE_INFO_NAMED_VALUE_INT, MAVLINK_MESSAGE_INFO_STATUSTEXT, MAVLINK_MESSAGE_INFO_DEBUG, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}} +#define MAVLINK_MESSAGE_INFO {MAVLINK_MESSAGE_INFO_HEARTBEAT, MAVLINK_MESSAGE_INFO_SYS_STATUS, MAVLINK_MESSAGE_INFO_SYSTEM_TIME, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_PING, MAVLINK_MESSAGE_INFO_CHANGE_OPERATOR_CONTROL, MAVLINK_MESSAGE_INFO_CHANGE_OPERATOR_CONTROL_ACK, MAVLINK_MESSAGE_INFO_AUTH_KEY, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_SET_MODE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_PARAM_REQUEST_READ, MAVLINK_MESSAGE_INFO_PARAM_REQUEST_LIST, MAVLINK_MESSAGE_INFO_PARAM_VALUE, MAVLINK_MESSAGE_INFO_PARAM_SET, MAVLINK_MESSAGE_INFO_GPS_RAW_INT, MAVLINK_MESSAGE_INFO_GPS_STATUS, MAVLINK_MESSAGE_INFO_SCALED_IMU, MAVLINK_MESSAGE_INFO_RAW_IMU, MAVLINK_MESSAGE_INFO_RAW_PRESSURE, MAVLINK_MESSAGE_INFO_SCALED_PRESSURE, MAVLINK_MESSAGE_INFO_ATTITUDE, MAVLINK_MESSAGE_INFO_ATTITUDE_QUATERNION, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED, MAVLINK_MESSAGE_INFO_GLOBAL_POSITION_INT, MAVLINK_MESSAGE_INFO_RC_CHANNELS_SCALED, MAVLINK_MESSAGE_INFO_RC_CHANNELS_RAW, MAVLINK_MESSAGE_INFO_SERVO_OUTPUT_RAW, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_PARTIAL_LIST, MAVLINK_MESSAGE_INFO_MISSION_WRITE_PARTIAL_LIST, MAVLINK_MESSAGE_INFO_MISSION_ITEM, MAVLINK_MESSAGE_INFO_MISSION_REQUEST, MAVLINK_MESSAGE_INFO_MISSION_SET_CURRENT, MAVLINK_MESSAGE_INFO_MISSION_CURRENT, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_LIST, MAVLINK_MESSAGE_INFO_MISSION_COUNT, MAVLINK_MESSAGE_INFO_MISSION_CLEAR_ALL, MAVLINK_MESSAGE_INFO_MISSION_ITEM_REACHED, MAVLINK_MESSAGE_INFO_MISSION_ACK, MAVLINK_MESSAGE_INFO_SET_GPS_GLOBAL_ORIGIN, MAVLINK_MESSAGE_INFO_GPS_GLOBAL_ORIGIN, MAVLINK_MESSAGE_INFO_SET_LOCAL_POSITION_SETPOINT, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_SETPOINT, MAVLINK_MESSAGE_INFO_GLOBAL_POSITION_SETPOINT_INT, MAVLINK_MESSAGE_INFO_SET_GLOBAL_POSITION_SETPOINT_INT, MAVLINK_MESSAGE_INFO_SAFETY_SET_ALLOWED_AREA, MAVLINK_MESSAGE_INFO_SAFETY_ALLOWED_AREA, MAVLINK_MESSAGE_INFO_SET_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_SET_ROLL_PITCH_YAW_SPEED_THRUST, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_SPEED_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_SET_QUAD_MOTORS_SETPOINT, MAVLINK_MESSAGE_INFO_SET_QUAD_SWARM_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_NAV_CONTROLLER_OUTPUT, MAVLINK_MESSAGE_INFO_SET_QUAD_SWARM_LED_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_STATE_CORRECTION, MAVLINK_MESSAGE_INFO_RC_CHANNELS, MAVLINK_MESSAGE_INFO_REQUEST_DATA_STREAM, MAVLINK_MESSAGE_INFO_DATA_STREAM, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_MANUAL_CONTROL, MAVLINK_MESSAGE_INFO_RC_CHANNELS_OVERRIDE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_VFR_HUD, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_COMMAND_LONG, MAVLINK_MESSAGE_INFO_COMMAND_ACK, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_RATES_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_MANUAL_SETPOINT, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED_SYSTEM_GLOBAL_OFFSET, MAVLINK_MESSAGE_INFO_HIL_STATE, MAVLINK_MESSAGE_INFO_HIL_CONTROLS, MAVLINK_MESSAGE_INFO_HIL_RC_INPUTS_RAW, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_OPTICAL_FLOW, MAVLINK_MESSAGE_INFO_GLOBAL_VISION_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_VISION_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_VISION_SPEED_ESTIMATE, MAVLINK_MESSAGE_INFO_VICON_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_HIGHRES_IMU, MAVLINK_MESSAGE_INFO_OMNIDIRECTIONAL_FLOW, MAVLINK_MESSAGE_INFO_HIL_SENSOR, MAVLINK_MESSAGE_INFO_SIM_STATE, MAVLINK_MESSAGE_INFO_RADIO_STATUS, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_START, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_DIR_LIST, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_RES, MAVLINK_MESSAGE_INFO_HIL_GPS, MAVLINK_MESSAGE_INFO_HIL_OPTICAL_FLOW, MAVLINK_MESSAGE_INFO_HIL_STATE_QUATERNION, MAVLINK_MESSAGE_INFO_SCALED_IMU2, MAVLINK_MESSAGE_INFO_LOG_REQUEST_LIST, MAVLINK_MESSAGE_INFO_LOG_ENTRY, MAVLINK_MESSAGE_INFO_LOG_REQUEST_DATA, MAVLINK_MESSAGE_INFO_LOG_DATA, MAVLINK_MESSAGE_INFO_LOG_ERASE, MAVLINK_MESSAGE_INFO_LOG_REQUEST_END, MAVLINK_MESSAGE_INFO_GPS_INJECT_DATA, MAVLINK_MESSAGE_INFO_GPS2_RAW, MAVLINK_MESSAGE_INFO_POWER_STATUS, MAVLINK_MESSAGE_INFO_SERIAL_CONTROL, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_DATA_TRANSMISSION_HANDSHAKE, MAVLINK_MESSAGE_INFO_ENCAPSULATED_DATA, MAVLINK_MESSAGE_INFO_DISTANCE_SENSOR, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_BATTERY_STATUS, MAVLINK_MESSAGE_INFO_SETPOINT_8DOF, MAVLINK_MESSAGE_INFO_SETPOINT_6DOF, MAVLINK_MESSAGE_INFO_AQ_TELEMETRY_F, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_MEMORY_VECT, MAVLINK_MESSAGE_INFO_DEBUG_VECT, MAVLINK_MESSAGE_INFO_NAMED_VALUE_FLOAT, MAVLINK_MESSAGE_INFO_NAMED_VALUE_INT, MAVLINK_MESSAGE_INFO_STATUSTEXT, MAVLINK_MESSAGE_INFO_DEBUG, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}} #endif #include "../protocol.h" @@ -71,6 +71,7 @@ enum MAV_CMD MAV_CMD_NAV_TAKEOFF=22, /* Takeoff from ground / hand |Minimum pitch (if airspeed sensor present), desired pitch without sensor| Empty| Empty| Yaw angle (if magnetometer present), ignored without magnetometer| Latitude| Longitude| Altitude| */ MAV_CMD_NAV_ROI=80, /* Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of intereset mode. (see MAV_ROI enum)| MISSION index/ target ID. (see MAV_ROI enum)| ROI index (allows a vehicle to manage multiple ROI's)| Empty| x the location of the fixed ROI (see MAV_FRAME)| y| z| */ MAV_CMD_NAV_PATHPLANNING=81, /* Control autonomous path planning on the MAV. |0: Disable local obstacle avoidance / local path planning (without resetting map), 1: Enable local path planning, 2: Enable and reset local path planning| 0: Disable full path planning (without resetting map), 1: Enable, 2: Enable and reset map/occupancy grid, 3: Enable and reset planned route, but not occupancy grid| Empty| Yaw angle at goal, in compass degrees, [0..360]| Latitude/X of goal| Longitude/Y of goal| Altitude/Z of goal| */ + MAV_CMD_NAV_SPLINE_WAYPOINT=82, /* Navigate to MISSION using a spline path. |Hold time in decimal seconds. (ignored by fixed wing, time to stay at MISSION for rotary wing)| Empty| Empty| Empty| Latitude/X of goal| Longitude/Y of goal| Altitude/Z of goal| */ MAV_CMD_NAV_LAST=95, /* NOP - This command is only used to mark the upper limit of the NAV/ACTION commands in the enumeration |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_CONDITION_DELAY=112, /* Delay mission state machine. |Delay in seconds (decimal)| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_CONDITION_CHANGE_ALT=113, /* Ascend/descend at rate. Delay mission state machine until desired altitude reached. |Descent / Ascend rate (m/s)| Empty| Empty| Empty| Empty| Empty| Finish Altitude| */ @@ -88,8 +89,16 @@ enum MAV_CMD MAV_CMD_DO_REPEAT_SERVO=184, /* Cycle a between its nominal setting and a desired PWM for a desired number of cycles with a desired period. |Servo number| PWM (microseconds, 1000 to 2000 typical)| Cycle count| Cycle time (seconds)| Empty| Empty| Empty| */ MAV_CMD_DO_CONTROL_VIDEO=200, /* Control onboard camera system. |Camera ID (-1 for all)| Transmission: 0: disabled, 1: enabled compressed, 2: enabled raw| Transmission mode: 0: video stream, >0: single images every n seconds (decimal)| Recording: 0: disabled, 1: enabled compressed, 2: enabled raw| Empty| Empty| Empty| */ MAV_CMD_DO_SET_ROI=201, /* Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of intereset mode. (see MAV_ROI enum)| MISSION index/ target ID. (see MAV_ROI enum)| ROI index (allows a vehicle to manage multiple ROI's)| Empty| x the location of the fixed ROI (see MAV_FRAME)| y| z| */ + MAV_CMD_DO_DIGICAM_CONFIGURE=202, /* Mission command to configure an on-board camera controller system. |Modes: P, TV, AV, M, Etc| Shutter speed: Divisor number for one second| Aperture: F stop number| ISO number e.g. 80, 100, 200, Etc| Exposure type enumerator| Command Identity| Main engine cut-off time before camera trigger in seconds/10 (0 means no cut-off)| */ + MAV_CMD_DO_DIGICAM_CONTROL=203, /* Mission command to control an on-board camera controller system. |Session control e.g. show/hide lens| Zoom's absolute position| Zooming step value to offset zoom from the current position| Focus Locking, Unlocking or Re-locking| Shooting Command| Command Identity| Empty| */ + MAV_CMD_DO_MOUNT_CONFIGURE=204, /* Mission command to configure a camera or antenna mount |Mount operation mode (see MAV_MOUNT_MODE enum)| stabilize roll? (1 = yes, 0 = no)| stabilize pitch? (1 = yes, 0 = no)| stabilize yaw? (1 = yes, 0 = no)| Empty| Empty| Empty| */ + MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch or lat in degrees, depending on mount mode.| roll or lon in degrees depending on mount mode| yaw or alt (in meters) depending on mount mode| reserved| reserved| reserved| MAV_MOUNT_MODE enum value| */ + MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set CAM_TRIGG_DIST for this flight |Camera trigger distance (meters)| Empty| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_DO_FENCE_ENABLE=207, /* Mission command to enable the geofence |enable? (0=disable, 1=enable)| Empty| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_DO_PARACHUTE=208, /* Mission command to trigger a parachute |action (0=disable, 1=enable, 2=release, for some systems see PARACHUTE_ACTION enum, not in general message set.)| Empty| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_DO_MOUNT_CONTROL_QUAT=220, /* Mission command to control a camera or antenna mount, using a quaternion as reference. |q1 - quaternion param #1| q2 - quaternion param #2| q3 - quaternion param #3| q4 - quaternion param #4| Empty| Empty| Empty| */ MAV_CMD_DO_LAST=240, /* NOP - This command is only used to mark the upper limit of the DO commands in the enumeration |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */ - MAV_CMD_PREFLIGHT_CALIBRATION=241, /* Trigger calibration. This command will be only accepted if in pre-flight mode. |Gyro calibration: 0: no, 1: yes| Magnetometer calibration: 0: no, 1: yes| Ground pressure: 0: no, 1: yes| Radio calibration: 0: no, 1: yes| Accelerometer calibration: 0: no, 1: yes| Empty| Empty| */ + MAV_CMD_PREFLIGHT_CALIBRATION=241, /* Trigger calibration. This command will be only accepted if in pre-flight mode. |Gyro calibration: 0: no, 1: yes| Magnetometer calibration: 0: no, 1: yes| Ground pressure: 0: no, 1: yes| Radio calibration: 0: no, 1: yes| Accelerometer calibration: 0: no, 1: yes| Compass/Motor interference calibration: 0: no, 1: yes| Empty| */ MAV_CMD_PREFLIGHT_SET_SENSOR_OFFSETS=242, /* Set sensor offsets. This command will be only accepted if in pre-flight mode. |Sensor to adjust the offsets for: 0: gyros, 1: accelerometer, 2: magnetometer, 3: barometer, 4: optical flow| X axis offset (or generic dimension 1), in the sensor's raw units| Y axis offset (or generic dimension 2), in the sensor's raw units| Z axis offset (or generic dimension 3), in the sensor's raw units| Generic dimension 4, in the sensor's raw units| Generic dimension 5, in the sensor's raw units| Generic dimension 6, in the sensor's raw units| */ MAV_CMD_PREFLIGHT_STORAGE=245, /* Request storage of different parameter values and logs. This command will be only accepted if in pre-flight mode. |Parameter storage: 0: READ FROM FLASH/EEPROM, 1: WRITE CURRENT TO FLASH/EEPROM| Mission storage: 0: READ FROM FLASH/EEPROM, 1: WRITE CURRENT TO FLASH/EEPROM| Reserved| Reserved| Empty| Empty| Empty| */ MAV_CMD_PREFLIGHT_REBOOT_SHUTDOWN=246, /* Request the reboot or shutdown of system components. |0: Do nothing for autopilot, 1: Reboot autopilot, 2: Shutdown autopilot.| 0: Do nothing for onboard computer, 1: Reboot onboard computer, 2: Shutdown onboard computer.| Reserved| Reserved| Empty| Empty| Empty| */ diff --git a/mavlink/include/mavlink/v1.0/autoquad/mavlink_msg_aq_telemetry_f.h b/mavlink/include/mavlink/v1.0/autoquad/mavlink_msg_aq_telemetry_f.h index ed7c86bcb..e78d5687a 100644 --- a/mavlink/include/mavlink/v1.0/autoquad/mavlink_msg_aq_telemetry_f.h +++ b/mavlink/include/mavlink/v1.0/autoquad/mavlink_msg_aq_telemetry_f.h @@ -366,6 +366,78 @@ static inline void mavlink_msg_aq_telemetry_f_send(mavlink_channel_t chan, uint1 #endif } +#if MAVLINK_MSG_ID_AQ_TELEMETRY_F_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_aq_telemetry_f_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint16_t Index, float value1, float value2, float value3, float value4, float value5, float value6, float value7, float value8, float value9, float value10, float value11, float value12, float value13, float value14, float value15, float value16, float value17, float value18, float value19, float value20) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, value1); + _mav_put_float(buf, 4, value2); + _mav_put_float(buf, 8, value3); + _mav_put_float(buf, 12, value4); + _mav_put_float(buf, 16, value5); + _mav_put_float(buf, 20, value6); + _mav_put_float(buf, 24, value7); + _mav_put_float(buf, 28, value8); + _mav_put_float(buf, 32, value9); + _mav_put_float(buf, 36, value10); + _mav_put_float(buf, 40, value11); + _mav_put_float(buf, 44, value12); + _mav_put_float(buf, 48, value13); + _mav_put_float(buf, 52, value14); + _mav_put_float(buf, 56, value15); + _mav_put_float(buf, 60, value16); + _mav_put_float(buf, 64, value17); + _mav_put_float(buf, 68, value18); + _mav_put_float(buf, 72, value19); + _mav_put_float(buf, 76, value20); + _mav_put_uint16_t(buf, 80, Index); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_AQ_TELEMETRY_F, buf, MAVLINK_MSG_ID_AQ_TELEMETRY_F_LEN, MAVLINK_MSG_ID_AQ_TELEMETRY_F_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_AQ_TELEMETRY_F, buf, MAVLINK_MSG_ID_AQ_TELEMETRY_F_LEN); +#endif +#else + mavlink_aq_telemetry_f_t *packet = (mavlink_aq_telemetry_f_t *)msgbuf; + packet->value1 = value1; + packet->value2 = value2; + packet->value3 = value3; + packet->value4 = value4; + packet->value5 = value5; + packet->value6 = value6; + packet->value7 = value7; + packet->value8 = value8; + packet->value9 = value9; + packet->value10 = value10; + packet->value11 = value11; + packet->value12 = value12; + packet->value13 = value13; + packet->value14 = value14; + packet->value15 = value15; + packet->value16 = value16; + packet->value17 = value17; + packet->value18 = value18; + packet->value19 = value19; + packet->value20 = value20; + packet->Index = Index; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_AQ_TELEMETRY_F, (const char *)packet, MAVLINK_MSG_ID_AQ_TELEMETRY_F_LEN, MAVLINK_MSG_ID_AQ_TELEMETRY_F_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_AQ_TELEMETRY_F, (const char *)packet, MAVLINK_MSG_ID_AQ_TELEMETRY_F_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE AQ_TELEMETRY_F UNPACKING diff --git a/mavlink/include/mavlink/v1.0/autoquad/version.h b/mavlink/include/mavlink/v1.0/autoquad/version.h index d125e92b1..5d2f33b60 100644 --- a/mavlink/include/mavlink/v1.0/autoquad/version.h +++ b/mavlink/include/mavlink/v1.0/autoquad/version.h @@ -5,7 +5,7 @@ #ifndef MAVLINK_VERSION_H #define MAVLINK_VERSION_H -#define MAVLINK_BUILD_DATE "Tue Feb 4 15:27:43 2014" +#define MAVLINK_BUILD_DATE "Sun Apr 13 09:38:19 2014" #define MAVLINK_WIRE_PROTOCOL_VERSION "1.0" #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255 diff --git a/mavlink/include/mavlink/v1.0/common/common.h b/mavlink/include/mavlink/v1.0/common/common.h index 7e1cf765b..020211d40 100644 --- a/mavlink/include/mavlink/v1.0/common/common.h +++ b/mavlink/include/mavlink/v1.0/common/common.h @@ -12,15 +12,15 @@ extern "C" { // MESSAGE LENGTHS AND CRCS #ifndef MAVLINK_MESSAGE_LENGTHS -#define MAVLINK_MESSAGE_LENGTHS {9, 31, 12, 0, 14, 28, 3, 32, 0, 0, 0, 6, 0, 0, 0, 0, 0, 0, 0, 0, 20, 2, 25, 23, 30, 101, 22, 26, 16, 14, 28, 32, 28, 28, 22, 22, 21, 6, 6, 37, 4, 4, 2, 2, 4, 2, 2, 3, 13, 12, 19, 17, 15, 15, 27, 25, 18, 18, 20, 20, 9, 34, 26, 46, 36, 0, 6, 4, 0, 11, 18, 0, 0, 0, 20, 0, 33, 3, 0, 0, 20, 22, 0, 0, 0, 0, 0, 0, 0, 28, 56, 42, 33, 0, 0, 0, 0, 0, 0, 0, 26, 32, 32, 20, 32, 62, 54, 64, 84, 9, 254, 249, 9, 36, 26, 64, 22, 6, 14, 12, 97, 2, 2, 113, 35, 0, 0, 0, 0, 0, 13, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 24, 33, 25, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 36, 30, 18, 18, 51, 9, 0} +#define MAVLINK_MESSAGE_LENGTHS {9, 31, 12, 0, 14, 28, 3, 32, 0, 0, 0, 6, 0, 0, 0, 0, 0, 0, 0, 0, 20, 2, 25, 23, 30, 101, 22, 26, 16, 14, 28, 32, 28, 28, 22, 22, 21, 6, 6, 37, 4, 4, 2, 2, 4, 2, 2, 3, 13, 12, 19, 17, 15, 15, 27, 25, 18, 18, 20, 20, 9, 34, 26, 46, 36, 42, 6, 4, 0, 11, 18, 0, 0, 0, 20, 0, 33, 3, 0, 0, 20, 22, 0, 0, 0, 0, 0, 0, 0, 28, 56, 42, 33, 0, 0, 0, 0, 0, 0, 0, 26, 32, 32, 20, 32, 62, 54, 64, 84, 9, 254, 249, 9, 36, 26, 64, 22, 6, 14, 12, 97, 2, 2, 113, 35, 6, 79, 0, 0, 0, 13, 255, 14, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 24, 33, 25, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 36, 30, 18, 18, 51, 9, 0} #endif #ifndef MAVLINK_MESSAGE_CRCS -#define MAVLINK_MESSAGE_CRCS {50, 124, 137, 0, 237, 217, 104, 119, 0, 0, 0, 89, 0, 0, 0, 0, 0, 0, 0, 0, 214, 159, 220, 168, 24, 23, 170, 144, 67, 115, 39, 246, 185, 104, 237, 244, 222, 212, 9, 254, 230, 28, 28, 132, 221, 232, 11, 153, 41, 39, 214, 223, 141, 33, 15, 3, 100, 24, 239, 238, 30, 240, 183, 130, 130, 0, 148, 21, 0, 243, 124, 0, 0, 0, 20, 0, 152, 143, 0, 0, 127, 106, 0, 0, 0, 0, 0, 0, 0, 231, 183, 63, 54, 0, 0, 0, 0, 0, 0, 0, 175, 102, 158, 208, 56, 93, 211, 108, 32, 185, 235, 93, 124, 124, 119, 4, 76, 128, 56, 116, 134, 237, 203, 250, 87, 0, 0, 0, 0, 0, 29, 223, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 177, 241, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 204, 49, 170, 44, 83, 46, 0} +#define MAVLINK_MESSAGE_CRCS {50, 124, 137, 0, 237, 217, 104, 119, 0, 0, 0, 89, 0, 0, 0, 0, 0, 0, 0, 0, 214, 159, 220, 168, 24, 23, 170, 144, 67, 115, 39, 246, 185, 104, 237, 244, 222, 212, 9, 254, 230, 28, 28, 132, 221, 232, 11, 153, 41, 39, 214, 223, 141, 33, 15, 3, 100, 24, 239, 238, 30, 240, 183, 130, 130, 118, 148, 21, 0, 243, 124, 0, 0, 0, 20, 0, 152, 143, 0, 0, 127, 106, 0, 0, 0, 0, 0, 0, 0, 231, 183, 63, 54, 0, 0, 0, 0, 0, 0, 0, 175, 102, 158, 208, 56, 93, 211, 108, 32, 185, 235, 93, 124, 124, 119, 4, 76, 128, 56, 116, 134, 237, 203, 250, 87, 203, 220, 0, 0, 0, 29, 223, 85, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 177, 241, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 204, 49, 170, 44, 83, 46, 0} #endif #ifndef MAVLINK_MESSAGE_INFO -#define MAVLINK_MESSAGE_INFO {MAVLINK_MESSAGE_INFO_HEARTBEAT, MAVLINK_MESSAGE_INFO_SYS_STATUS, MAVLINK_MESSAGE_INFO_SYSTEM_TIME, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_PING, MAVLINK_MESSAGE_INFO_CHANGE_OPERATOR_CONTROL, MAVLINK_MESSAGE_INFO_CHANGE_OPERATOR_CONTROL_ACK, MAVLINK_MESSAGE_INFO_AUTH_KEY, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_SET_MODE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_PARAM_REQUEST_READ, MAVLINK_MESSAGE_INFO_PARAM_REQUEST_LIST, MAVLINK_MESSAGE_INFO_PARAM_VALUE, MAVLINK_MESSAGE_INFO_PARAM_SET, MAVLINK_MESSAGE_INFO_GPS_RAW_INT, MAVLINK_MESSAGE_INFO_GPS_STATUS, MAVLINK_MESSAGE_INFO_SCALED_IMU, MAVLINK_MESSAGE_INFO_RAW_IMU, MAVLINK_MESSAGE_INFO_RAW_PRESSURE, MAVLINK_MESSAGE_INFO_SCALED_PRESSURE, MAVLINK_MESSAGE_INFO_ATTITUDE, MAVLINK_MESSAGE_INFO_ATTITUDE_QUATERNION, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED, MAVLINK_MESSAGE_INFO_GLOBAL_POSITION_INT, MAVLINK_MESSAGE_INFO_RC_CHANNELS_SCALED, MAVLINK_MESSAGE_INFO_RC_CHANNELS_RAW, MAVLINK_MESSAGE_INFO_SERVO_OUTPUT_RAW, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_PARTIAL_LIST, MAVLINK_MESSAGE_INFO_MISSION_WRITE_PARTIAL_LIST, MAVLINK_MESSAGE_INFO_MISSION_ITEM, MAVLINK_MESSAGE_INFO_MISSION_REQUEST, MAVLINK_MESSAGE_INFO_MISSION_SET_CURRENT, MAVLINK_MESSAGE_INFO_MISSION_CURRENT, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_LIST, MAVLINK_MESSAGE_INFO_MISSION_COUNT, MAVLINK_MESSAGE_INFO_MISSION_CLEAR_ALL, MAVLINK_MESSAGE_INFO_MISSION_ITEM_REACHED, MAVLINK_MESSAGE_INFO_MISSION_ACK, MAVLINK_MESSAGE_INFO_SET_GPS_GLOBAL_ORIGIN, MAVLINK_MESSAGE_INFO_GPS_GLOBAL_ORIGIN, MAVLINK_MESSAGE_INFO_SET_LOCAL_POSITION_SETPOINT, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_SETPOINT, MAVLINK_MESSAGE_INFO_GLOBAL_POSITION_SETPOINT_INT, MAVLINK_MESSAGE_INFO_SET_GLOBAL_POSITION_SETPOINT_INT, MAVLINK_MESSAGE_INFO_SAFETY_SET_ALLOWED_AREA, MAVLINK_MESSAGE_INFO_SAFETY_ALLOWED_AREA, MAVLINK_MESSAGE_INFO_SET_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_SET_ROLL_PITCH_YAW_SPEED_THRUST, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_SPEED_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_SET_QUAD_MOTORS_SETPOINT, MAVLINK_MESSAGE_INFO_SET_QUAD_SWARM_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_NAV_CONTROLLER_OUTPUT, MAVLINK_MESSAGE_INFO_SET_QUAD_SWARM_LED_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_STATE_CORRECTION, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_REQUEST_DATA_STREAM, MAVLINK_MESSAGE_INFO_DATA_STREAM, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_MANUAL_CONTROL, MAVLINK_MESSAGE_INFO_RC_CHANNELS_OVERRIDE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_VFR_HUD, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_COMMAND_LONG, MAVLINK_MESSAGE_INFO_COMMAND_ACK, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_RATES_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_MANUAL_SETPOINT, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED_SYSTEM_GLOBAL_OFFSET, MAVLINK_MESSAGE_INFO_HIL_STATE, MAVLINK_MESSAGE_INFO_HIL_CONTROLS, MAVLINK_MESSAGE_INFO_HIL_RC_INPUTS_RAW, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_OPTICAL_FLOW, MAVLINK_MESSAGE_INFO_GLOBAL_VISION_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_VISION_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_VISION_SPEED_ESTIMATE, MAVLINK_MESSAGE_INFO_VICON_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_HIGHRES_IMU, MAVLINK_MESSAGE_INFO_OMNIDIRECTIONAL_FLOW, MAVLINK_MESSAGE_INFO_HIL_SENSOR, MAVLINK_MESSAGE_INFO_SIM_STATE, MAVLINK_MESSAGE_INFO_RADIO_STATUS, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_START, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_DIR_LIST, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_RES, MAVLINK_MESSAGE_INFO_HIL_GPS, MAVLINK_MESSAGE_INFO_HIL_OPTICAL_FLOW, MAVLINK_MESSAGE_INFO_HIL_STATE_QUATERNION, MAVLINK_MESSAGE_INFO_SCALED_IMU2, MAVLINK_MESSAGE_INFO_LOG_REQUEST_LIST, MAVLINK_MESSAGE_INFO_LOG_ENTRY, MAVLINK_MESSAGE_INFO_LOG_REQUEST_DATA, MAVLINK_MESSAGE_INFO_LOG_DATA, MAVLINK_MESSAGE_INFO_LOG_ERASE, MAVLINK_MESSAGE_INFO_LOG_REQUEST_END, MAVLINK_MESSAGE_INFO_GPS_INJECT_DATA, MAVLINK_MESSAGE_INFO_GPS2_RAW, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_DATA_TRANSMISSION_HANDSHAKE, MAVLINK_MESSAGE_INFO_ENCAPSULATED_DATA, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_BATTERY_STATUS, MAVLINK_MESSAGE_INFO_SETPOINT_8DOF, MAVLINK_MESSAGE_INFO_SETPOINT_6DOF, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_MEMORY_VECT, MAVLINK_MESSAGE_INFO_DEBUG_VECT, MAVLINK_MESSAGE_INFO_NAMED_VALUE_FLOAT, MAVLINK_MESSAGE_INFO_NAMED_VALUE_INT, MAVLINK_MESSAGE_INFO_STATUSTEXT, MAVLINK_MESSAGE_INFO_DEBUG, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}} +#define MAVLINK_MESSAGE_INFO {MAVLINK_MESSAGE_INFO_HEARTBEAT, MAVLINK_MESSAGE_INFO_SYS_STATUS, MAVLINK_MESSAGE_INFO_SYSTEM_TIME, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_PING, MAVLINK_MESSAGE_INFO_CHANGE_OPERATOR_CONTROL, MAVLINK_MESSAGE_INFO_CHANGE_OPERATOR_CONTROL_ACK, MAVLINK_MESSAGE_INFO_AUTH_KEY, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_SET_MODE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_PARAM_REQUEST_READ, MAVLINK_MESSAGE_INFO_PARAM_REQUEST_LIST, MAVLINK_MESSAGE_INFO_PARAM_VALUE, MAVLINK_MESSAGE_INFO_PARAM_SET, MAVLINK_MESSAGE_INFO_GPS_RAW_INT, MAVLINK_MESSAGE_INFO_GPS_STATUS, MAVLINK_MESSAGE_INFO_SCALED_IMU, MAVLINK_MESSAGE_INFO_RAW_IMU, MAVLINK_MESSAGE_INFO_RAW_PRESSURE, MAVLINK_MESSAGE_INFO_SCALED_PRESSURE, MAVLINK_MESSAGE_INFO_ATTITUDE, MAVLINK_MESSAGE_INFO_ATTITUDE_QUATERNION, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED, MAVLINK_MESSAGE_INFO_GLOBAL_POSITION_INT, MAVLINK_MESSAGE_INFO_RC_CHANNELS_SCALED, MAVLINK_MESSAGE_INFO_RC_CHANNELS_RAW, MAVLINK_MESSAGE_INFO_SERVO_OUTPUT_RAW, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_PARTIAL_LIST, MAVLINK_MESSAGE_INFO_MISSION_WRITE_PARTIAL_LIST, MAVLINK_MESSAGE_INFO_MISSION_ITEM, MAVLINK_MESSAGE_INFO_MISSION_REQUEST, MAVLINK_MESSAGE_INFO_MISSION_SET_CURRENT, MAVLINK_MESSAGE_INFO_MISSION_CURRENT, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_LIST, MAVLINK_MESSAGE_INFO_MISSION_COUNT, MAVLINK_MESSAGE_INFO_MISSION_CLEAR_ALL, MAVLINK_MESSAGE_INFO_MISSION_ITEM_REACHED, MAVLINK_MESSAGE_INFO_MISSION_ACK, MAVLINK_MESSAGE_INFO_SET_GPS_GLOBAL_ORIGIN, MAVLINK_MESSAGE_INFO_GPS_GLOBAL_ORIGIN, MAVLINK_MESSAGE_INFO_SET_LOCAL_POSITION_SETPOINT, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_SETPOINT, MAVLINK_MESSAGE_INFO_GLOBAL_POSITION_SETPOINT_INT, MAVLINK_MESSAGE_INFO_SET_GLOBAL_POSITION_SETPOINT_INT, MAVLINK_MESSAGE_INFO_SAFETY_SET_ALLOWED_AREA, MAVLINK_MESSAGE_INFO_SAFETY_ALLOWED_AREA, MAVLINK_MESSAGE_INFO_SET_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_SET_ROLL_PITCH_YAW_SPEED_THRUST, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_SPEED_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_SET_QUAD_MOTORS_SETPOINT, MAVLINK_MESSAGE_INFO_SET_QUAD_SWARM_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_NAV_CONTROLLER_OUTPUT, MAVLINK_MESSAGE_INFO_SET_QUAD_SWARM_LED_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_STATE_CORRECTION, MAVLINK_MESSAGE_INFO_RC_CHANNELS, MAVLINK_MESSAGE_INFO_REQUEST_DATA_STREAM, MAVLINK_MESSAGE_INFO_DATA_STREAM, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_MANUAL_CONTROL, MAVLINK_MESSAGE_INFO_RC_CHANNELS_OVERRIDE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_VFR_HUD, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_COMMAND_LONG, MAVLINK_MESSAGE_INFO_COMMAND_ACK, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_RATES_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_MANUAL_SETPOINT, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED_SYSTEM_GLOBAL_OFFSET, MAVLINK_MESSAGE_INFO_HIL_STATE, MAVLINK_MESSAGE_INFO_HIL_CONTROLS, MAVLINK_MESSAGE_INFO_HIL_RC_INPUTS_RAW, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_OPTICAL_FLOW, MAVLINK_MESSAGE_INFO_GLOBAL_VISION_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_VISION_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_VISION_SPEED_ESTIMATE, MAVLINK_MESSAGE_INFO_VICON_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_HIGHRES_IMU, MAVLINK_MESSAGE_INFO_OMNIDIRECTIONAL_FLOW, MAVLINK_MESSAGE_INFO_HIL_SENSOR, MAVLINK_MESSAGE_INFO_SIM_STATE, MAVLINK_MESSAGE_INFO_RADIO_STATUS, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_START, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_DIR_LIST, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_RES, MAVLINK_MESSAGE_INFO_HIL_GPS, MAVLINK_MESSAGE_INFO_HIL_OPTICAL_FLOW, MAVLINK_MESSAGE_INFO_HIL_STATE_QUATERNION, MAVLINK_MESSAGE_INFO_SCALED_IMU2, MAVLINK_MESSAGE_INFO_LOG_REQUEST_LIST, MAVLINK_MESSAGE_INFO_LOG_ENTRY, MAVLINK_MESSAGE_INFO_LOG_REQUEST_DATA, MAVLINK_MESSAGE_INFO_LOG_DATA, MAVLINK_MESSAGE_INFO_LOG_ERASE, MAVLINK_MESSAGE_INFO_LOG_REQUEST_END, MAVLINK_MESSAGE_INFO_GPS_INJECT_DATA, MAVLINK_MESSAGE_INFO_GPS2_RAW, MAVLINK_MESSAGE_INFO_POWER_STATUS, MAVLINK_MESSAGE_INFO_SERIAL_CONTROL, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_DATA_TRANSMISSION_HANDSHAKE, MAVLINK_MESSAGE_INFO_ENCAPSULATED_DATA, MAVLINK_MESSAGE_INFO_DISTANCE_SENSOR, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_BATTERY_STATUS, MAVLINK_MESSAGE_INFO_SETPOINT_8DOF, MAVLINK_MESSAGE_INFO_SETPOINT_6DOF, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_MEMORY_VECT, MAVLINK_MESSAGE_INFO_DEBUG_VECT, MAVLINK_MESSAGE_INFO_NAMED_VALUE_FLOAT, MAVLINK_MESSAGE_INFO_NAMED_VALUE_INT, MAVLINK_MESSAGE_INFO_STATUSTEXT, MAVLINK_MESSAGE_INFO_DEBUG, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}} #endif #include "../protocol.h" @@ -79,7 +79,8 @@ enum MAV_TYPE MAV_TYPE_TRICOPTER=15, /* Octorotor | */ MAV_TYPE_FLAPPING_WING=16, /* Flapping wing | */ MAV_TYPE_KITE=17, /* Flapping wing | */ - MAV_TYPE_ENUM_END=18, /* | */ + MAV_TYPE_ONBOARD_CONTROLLER=18, /* Onboard companion controller | */ + MAV_TYPE_ENUM_END=19, /* | */ }; #endif @@ -228,7 +229,8 @@ enum MAV_SYS_STATUS_SENSOR MAV_SYS_STATUS_SENSOR_3D_GYRO2=131072, /* 0x20000 2nd 3D gyro | */ MAV_SYS_STATUS_SENSOR_3D_ACCEL2=262144, /* 0x40000 2nd 3D accelerometer | */ MAV_SYS_STATUS_SENSOR_3D_MAG2=524288, /* 0x80000 2nd 3D magnetometer | */ - MAV_SYS_STATUS_SENSOR_ENUM_END=524289, /* | */ + MAV_SYS_STATUS_GEOFENCE=1048576, /* 0x100000 geofence | */ + MAV_SYS_STATUS_SENSOR_ENUM_END=1048577, /* | */ }; #endif @@ -242,7 +244,9 @@ enum MAV_FRAME MAV_FRAME_MISSION=2, /* NOT a coordinate frame, indicates a mission command. | */ MAV_FRAME_GLOBAL_RELATIVE_ALT=3, /* Global coordinate frame, WGS84 coordinate system, relative altitude over ground with respect to the home position. First value / x: latitude, second value / y: longitude, third value / z: positive altitude with 0 being at the altitude of the home location. | */ MAV_FRAME_LOCAL_ENU=4, /* Local coordinate frame, Z-down (x: east, y: north, z: up) | */ - MAV_FRAME_ENUM_END=5, /* | */ + MAV_FRAME_GLOBAL_INT=5, /* Global coordinate frame with some fields as scaled integers, WGS84 coordinate system. First value / x: latitude, second value / y: longitude, third value / z: positive altitude over mean sea level (MSL). Lat / Lon are scaled * 1E7 to avoid floating point accuracy limitations. | */ + MAV_FRAME_GLOBAL_RELATIVE_ALT_INT=6, /* Global coordinate frame with some fields as scaled integers, WGS84 coordinate system, relative altitude over ground with respect to the home position. First value / x: latitude, second value / y: longitude, third value / z: positive altitude with 0 being at the altitude of the home location. Lat / Lon are scaled * 1E7 to avoid floating point accuracy limitations. | */ + MAV_FRAME_ENUM_END=7, /* | */ }; #endif @@ -261,6 +265,57 @@ enum MAVLINK_DATA_STREAM_TYPE }; #endif +/** @brief */ +#ifndef HAVE_ENUM_FENCE_ACTION +#define HAVE_ENUM_FENCE_ACTION +enum FENCE_ACTION +{ + FENCE_ACTION_NONE=0, /* Disable fenced mode | */ + FENCE_ACTION_GUIDED=1, /* Switched to guided mode to return point (fence point 0) | */ + FENCE_ACTION_REPORT=2, /* Report fence breach, but don't take action | */ + FENCE_ACTION_GUIDED_THR_PASS=3, /* Switched to guided mode to return point (fence point 0) with manual throttle control | */ + FENCE_ACTION_ENUM_END=4, /* | */ +}; +#endif + +/** @brief */ +#ifndef HAVE_ENUM_FENCE_BREACH +#define HAVE_ENUM_FENCE_BREACH +enum FENCE_BREACH +{ + FENCE_BREACH_NONE=0, /* No last fence breach | */ + FENCE_BREACH_MINALT=1, /* Breached minimum altitude | */ + FENCE_BREACH_MAXALT=2, /* Breached maximum altitude | */ + FENCE_BREACH_BOUNDARY=3, /* Breached fence boundary | */ + FENCE_BREACH_ENUM_END=4, /* | */ +}; +#endif + +/** @brief Enumeration of possible mount operation modes */ +#ifndef HAVE_ENUM_MAV_MOUNT_MODE +#define HAVE_ENUM_MAV_MOUNT_MODE +enum MAV_MOUNT_MODE +{ + MAV_MOUNT_MODE_RETRACT=0, /* Load and keep safe position (Roll,Pitch,Yaw) from permant memory and stop stabilization | */ + MAV_MOUNT_MODE_NEUTRAL=1, /* Load and keep neutral position (Roll,Pitch,Yaw) from permanent memory. | */ + MAV_MOUNT_MODE_MAVLINK_TARGETING=2, /* Load neutral position and start MAVLink Roll,Pitch,Yaw control with stabilization | */ + MAV_MOUNT_MODE_RC_TARGETING=3, /* Load neutral position and start RC Roll,Pitch,Yaw control with stabilization | */ + MAV_MOUNT_MODE_GPS_POINT=4, /* Load neutral position and start to point to Lat,Lon,Alt | */ + MAV_MOUNT_MODE_ENUM_END=5, /* | */ +}; +#endif + +/** @brief Enumeration of distance sensor types */ +#ifndef HAVE_ENUM_MAV_DISTANCE_SENSOR +#define HAVE_ENUM_MAV_DISTANCE_SENSOR +enum MAV_DISTANCE_SENSOR +{ + MAV_DISTANCE_SENSOR_LASER=0, /* Laser altimeter, e.g. LightWare SF02/F or PulsedLight units | */ + MAV_DISTANCE_SENSOR_ULTRASOUND=1, /* Laser altimeter, e.g. MaxBotix units | */ + MAV_DISTANCE_SENSOR_ENUM_END=2, /* | */ +}; +#endif + /** @brief Commands to be executed by the MAV. They can be executed on user request, or as part of a mission script. If the action is used in a mission, the parameter mapping to the waypoint/mission message is as follows: Param 1, Param 2, Param 3, Param 4, X: Param 5, Y:Param 6, Z:Param 7. This command list is similar what ARINC 424 is for commercial aircraft: A data format how to interpret waypoint/mission data. */ #ifndef HAVE_ENUM_MAV_CMD #define HAVE_ENUM_MAV_CMD @@ -275,6 +330,7 @@ enum MAV_CMD MAV_CMD_NAV_TAKEOFF=22, /* Takeoff from ground / hand |Minimum pitch (if airspeed sensor present), desired pitch without sensor| Empty| Empty| Yaw angle (if magnetometer present), ignored without magnetometer| Latitude| Longitude| Altitude| */ MAV_CMD_NAV_ROI=80, /* Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of intereset mode. (see MAV_ROI enum)| MISSION index/ target ID. (see MAV_ROI enum)| ROI index (allows a vehicle to manage multiple ROI's)| Empty| x the location of the fixed ROI (see MAV_FRAME)| y| z| */ MAV_CMD_NAV_PATHPLANNING=81, /* Control autonomous path planning on the MAV. |0: Disable local obstacle avoidance / local path planning (without resetting map), 1: Enable local path planning, 2: Enable and reset local path planning| 0: Disable full path planning (without resetting map), 1: Enable, 2: Enable and reset map/occupancy grid, 3: Enable and reset planned route, but not occupancy grid| Empty| Yaw angle at goal, in compass degrees, [0..360]| Latitude/X of goal| Longitude/Y of goal| Altitude/Z of goal| */ + MAV_CMD_NAV_SPLINE_WAYPOINT=82, /* Navigate to MISSION using a spline path. |Hold time in decimal seconds. (ignored by fixed wing, time to stay at MISSION for rotary wing)| Empty| Empty| Empty| Latitude/X of goal| Longitude/Y of goal| Altitude/Z of goal| */ MAV_CMD_NAV_LAST=95, /* NOP - This command is only used to mark the upper limit of the NAV/ACTION commands in the enumeration |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_CONDITION_DELAY=112, /* Delay mission state machine. |Delay in seconds (decimal)| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_CONDITION_CHANGE_ALT=113, /* Ascend/descend at rate. Delay mission state machine until desired altitude reached. |Descent / Ascend rate (m/s)| Empty| Empty| Empty| Empty| Empty| Finish Altitude| */ @@ -292,8 +348,16 @@ enum MAV_CMD MAV_CMD_DO_REPEAT_SERVO=184, /* Cycle a between its nominal setting and a desired PWM for a desired number of cycles with a desired period. |Servo number| PWM (microseconds, 1000 to 2000 typical)| Cycle count| Cycle time (seconds)| Empty| Empty| Empty| */ MAV_CMD_DO_CONTROL_VIDEO=200, /* Control onboard camera system. |Camera ID (-1 for all)| Transmission: 0: disabled, 1: enabled compressed, 2: enabled raw| Transmission mode: 0: video stream, >0: single images every n seconds (decimal)| Recording: 0: disabled, 1: enabled compressed, 2: enabled raw| Empty| Empty| Empty| */ MAV_CMD_DO_SET_ROI=201, /* Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of intereset mode. (see MAV_ROI enum)| MISSION index/ target ID. (see MAV_ROI enum)| ROI index (allows a vehicle to manage multiple ROI's)| Empty| x the location of the fixed ROI (see MAV_FRAME)| y| z| */ + MAV_CMD_DO_DIGICAM_CONFIGURE=202, /* Mission command to configure an on-board camera controller system. |Modes: P, TV, AV, M, Etc| Shutter speed: Divisor number for one second| Aperture: F stop number| ISO number e.g. 80, 100, 200, Etc| Exposure type enumerator| Command Identity| Main engine cut-off time before camera trigger in seconds/10 (0 means no cut-off)| */ + MAV_CMD_DO_DIGICAM_CONTROL=203, /* Mission command to control an on-board camera controller system. |Session control e.g. show/hide lens| Zoom's absolute position| Zooming step value to offset zoom from the current position| Focus Locking, Unlocking or Re-locking| Shooting Command| Command Identity| Empty| */ + MAV_CMD_DO_MOUNT_CONFIGURE=204, /* Mission command to configure a camera or antenna mount |Mount operation mode (see MAV_MOUNT_MODE enum)| stabilize roll? (1 = yes, 0 = no)| stabilize pitch? (1 = yes, 0 = no)| stabilize yaw? (1 = yes, 0 = no)| Empty| Empty| Empty| */ + MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch or lat in degrees, depending on mount mode.| roll or lon in degrees depending on mount mode| yaw or alt (in meters) depending on mount mode| reserved| reserved| reserved| MAV_MOUNT_MODE enum value| */ + MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set CAM_TRIGG_DIST for this flight |Camera trigger distance (meters)| Empty| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_DO_FENCE_ENABLE=207, /* Mission command to enable the geofence |enable? (0=disable, 1=enable)| Empty| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_DO_PARACHUTE=208, /* Mission command to trigger a parachute |action (0=disable, 1=enable, 2=release, for some systems see PARACHUTE_ACTION enum, not in general message set.)| Empty| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_DO_MOUNT_CONTROL_QUAT=220, /* Mission command to control a camera or antenna mount, using a quaternion as reference. |q1 - quaternion param #1| q2 - quaternion param #2| q3 - quaternion param #3| q4 - quaternion param #4| Empty| Empty| Empty| */ MAV_CMD_DO_LAST=240, /* NOP - This command is only used to mark the upper limit of the DO commands in the enumeration |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */ - MAV_CMD_PREFLIGHT_CALIBRATION=241, /* Trigger calibration. This command will be only accepted if in pre-flight mode. |Gyro calibration: 0: no, 1: yes| Magnetometer calibration: 0: no, 1: yes| Ground pressure: 0: no, 1: yes| Radio calibration: 0: no, 1: yes| Accelerometer calibration: 0: no, 1: yes| Empty| Empty| */ + MAV_CMD_PREFLIGHT_CALIBRATION=241, /* Trigger calibration. This command will be only accepted if in pre-flight mode. |Gyro calibration: 0: no, 1: yes| Magnetometer calibration: 0: no, 1: yes| Ground pressure: 0: no, 1: yes| Radio calibration: 0: no, 1: yes| Accelerometer calibration: 0: no, 1: yes| Compass/Motor interference calibration: 0: no, 1: yes| Empty| */ MAV_CMD_PREFLIGHT_SET_SENSOR_OFFSETS=242, /* Set sensor offsets. This command will be only accepted if in pre-flight mode. |Sensor to adjust the offsets for: 0: gyros, 1: accelerometer, 2: magnetometer, 3: barometer, 4: optical flow| X axis offset (or generic dimension 1), in the sensor's raw units| Y axis offset (or generic dimension 2), in the sensor's raw units| Z axis offset (or generic dimension 3), in the sensor's raw units| Generic dimension 4, in the sensor's raw units| Generic dimension 5, in the sensor's raw units| Generic dimension 6, in the sensor's raw units| */ MAV_CMD_PREFLIGHT_STORAGE=245, /* Request storage of different parameter values and logs. This command will be only accepted if in pre-flight mode. |Parameter storage: 0: READ FROM FLASH/EEPROM, 1: WRITE CURRENT TO FLASH/EEPROM| Mission storage: 0: READ FROM FLASH/EEPROM, 1: WRITE CURRENT TO FLASH/EEPROM| Reserved| Reserved| Empty| Empty| Empty| */ MAV_CMD_PREFLIGHT_REBOOT_SHUTDOWN=246, /* Request the reboot or shutdown of system components. |0: Do nothing for autopilot, 1: Reboot autopilot, 2: Shutdown autopilot.| 0: Do nothing for onboard computer, 1: Reboot onboard computer, 2: Shutdown onboard computer.| Reserved| Reserved| Empty| Empty| Empty| */ @@ -433,6 +497,48 @@ enum MAV_SEVERITY }; #endif +/** @brief Power supply status flags (bitmask) */ +#ifndef HAVE_ENUM_MAV_POWER_STATUS +#define HAVE_ENUM_MAV_POWER_STATUS +enum MAV_POWER_STATUS +{ + MAV_POWER_STATUS_BRICK_VALID=1, /* main brick power supply valid | */ + MAV_POWER_STATUS_SERVO_VALID=2, /* main servo power supply valid for FMU | */ + MAV_POWER_STATUS_USB_CONNECTED=4, /* USB power is connected | */ + MAV_POWER_STATUS_PERIPH_OVERCURRENT=8, /* peripheral supply is in over-current state | */ + MAV_POWER_STATUS_PERIPH_HIPOWER_OVERCURRENT=16, /* hi-power peripheral supply is in over-current state | */ + MAV_POWER_STATUS_CHANGED=32, /* Power status has changed since boot | */ + MAV_POWER_STATUS_ENUM_END=33, /* | */ +}; +#endif + +/** @brief SERIAL_CONTROL device types */ +#ifndef HAVE_ENUM_SERIAL_CONTROL_DEV +#define HAVE_ENUM_SERIAL_CONTROL_DEV +enum SERIAL_CONTROL_DEV +{ + SERIAL_CONTROL_DEV_TELEM1=0, /* First telemetry port | */ + SERIAL_CONTROL_DEV_TELEM2=1, /* Second telemetry port | */ + SERIAL_CONTROL_DEV_GPS1=2, /* First GPS port | */ + SERIAL_CONTROL_DEV_GPS2=3, /* Second GPS port | */ + SERIAL_CONTROL_DEV_ENUM_END=4, /* | */ +}; +#endif + +/** @brief SERIAL_CONTROL flags (bitmask) */ +#ifndef HAVE_ENUM_SERIAL_CONTROL_FLAG +#define HAVE_ENUM_SERIAL_CONTROL_FLAG +enum SERIAL_CONTROL_FLAG +{ + SERIAL_CONTROL_FLAG_REPLY=1, /* Set if this is a reply | */ + SERIAL_CONTROL_FLAG_RESPOND=2, /* Set if the sender wants the receiver to send a response as another SERIAL_CONTROL message | */ + SERIAL_CONTROL_FLAG_EXCLUSIVE=4, /* Set if access to the serial port should be removed from whatever driver is currently using it, giving exclusive access to the SERIAL_CONTROL protocol. The port can be handed back by sending a request without this flag set | */ + SERIAL_CONTROL_FLAG_BLOCKING=8, /* Block on writes to the serial port | */ + SERIAL_CONTROL_FLAG_MULTI=16, /* Send multiple replies until port is drained | */ + SERIAL_CONTROL_FLAG_ENUM_END=17, /* | */ +}; +#endif + // MAVLINK VERSION @@ -500,6 +606,7 @@ enum MAV_SEVERITY #include "./mavlink_msg_nav_controller_output.h" #include "./mavlink_msg_set_quad_swarm_led_roll_pitch_yaw_thrust.h" #include "./mavlink_msg_state_correction.h" +#include "./mavlink_msg_rc_channels.h" #include "./mavlink_msg_request_data_stream.h" #include "./mavlink_msg_data_stream.h" #include "./mavlink_msg_manual_control.h" @@ -538,8 +645,11 @@ enum MAV_SEVERITY #include "./mavlink_msg_log_request_end.h" #include "./mavlink_msg_gps_inject_data.h" #include "./mavlink_msg_gps2_raw.h" +#include "./mavlink_msg_power_status.h" +#include "./mavlink_msg_serial_control.h" #include "./mavlink_msg_data_transmission_handshake.h" #include "./mavlink_msg_encapsulated_data.h" +#include "./mavlink_msg_distance_sensor.h" #include "./mavlink_msg_battery_status.h" #include "./mavlink_msg_setpoint_8dof.h" #include "./mavlink_msg_setpoint_6dof.h" diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_attitude.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_attitude.h index 8ddf5bf09..ff2f104d4 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_attitude.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_attitude.h @@ -212,6 +212,50 @@ static inline void mavlink_msg_attitude_send(mavlink_channel_t chan, uint32_t ti #endif } +#if MAVLINK_MSG_ID_ATTITUDE_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_attitude_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint32_t time_boot_ms, float roll, float pitch, float yaw, float rollspeed, float pitchspeed, float yawspeed) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, time_boot_ms); + _mav_put_float(buf, 4, roll); + _mav_put_float(buf, 8, pitch); + _mav_put_float(buf, 12, yaw); + _mav_put_float(buf, 16, rollspeed); + _mav_put_float(buf, 20, pitchspeed); + _mav_put_float(buf, 24, yawspeed); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ATTITUDE, buf, MAVLINK_MSG_ID_ATTITUDE_LEN, MAVLINK_MSG_ID_ATTITUDE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ATTITUDE, buf, MAVLINK_MSG_ID_ATTITUDE_LEN); +#endif +#else + mavlink_attitude_t *packet = (mavlink_attitude_t *)msgbuf; + packet->time_boot_ms = time_boot_ms; + packet->roll = roll; + packet->pitch = pitch; + packet->yaw = yaw; + packet->rollspeed = rollspeed; + packet->pitchspeed = pitchspeed; + packet->yawspeed = yawspeed; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ATTITUDE, (const char *)packet, MAVLINK_MSG_ID_ATTITUDE_LEN, MAVLINK_MSG_ID_ATTITUDE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ATTITUDE, (const char *)packet, MAVLINK_MSG_ID_ATTITUDE_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE ATTITUDE UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_attitude_quaternion.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_attitude_quaternion.h index 9f8d58759..3b97b40d0 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_attitude_quaternion.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_attitude_quaternion.h @@ -223,6 +223,52 @@ static inline void mavlink_msg_attitude_quaternion_send(mavlink_channel_t chan, #endif } +#if MAVLINK_MSG_ID_ATTITUDE_QUATERNION_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_attitude_quaternion_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint32_t time_boot_ms, float q1, float q2, float q3, float q4, float rollspeed, float pitchspeed, float yawspeed) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, time_boot_ms); + _mav_put_float(buf, 4, q1); + _mav_put_float(buf, 8, q2); + _mav_put_float(buf, 12, q3); + _mav_put_float(buf, 16, q4); + _mav_put_float(buf, 20, rollspeed); + _mav_put_float(buf, 24, pitchspeed); + _mav_put_float(buf, 28, yawspeed); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ATTITUDE_QUATERNION, buf, MAVLINK_MSG_ID_ATTITUDE_QUATERNION_LEN, MAVLINK_MSG_ID_ATTITUDE_QUATERNION_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ATTITUDE_QUATERNION, buf, MAVLINK_MSG_ID_ATTITUDE_QUATERNION_LEN); +#endif +#else + mavlink_attitude_quaternion_t *packet = (mavlink_attitude_quaternion_t *)msgbuf; + packet->time_boot_ms = time_boot_ms; + packet->q1 = q1; + packet->q2 = q2; + packet->q3 = q3; + packet->q4 = q4; + packet->rollspeed = rollspeed; + packet->pitchspeed = pitchspeed; + packet->yawspeed = yawspeed; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ATTITUDE_QUATERNION, (const char *)packet, MAVLINK_MSG_ID_ATTITUDE_QUATERNION_LEN, MAVLINK_MSG_ID_ATTITUDE_QUATERNION_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ATTITUDE_QUATERNION, (const char *)packet, MAVLINK_MSG_ID_ATTITUDE_QUATERNION_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE ATTITUDE_QUATERNION UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_auth_key.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_auth_key.h index 5703a5987..f31b6bbf4 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_auth_key.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_auth_key.h @@ -146,6 +146,38 @@ static inline void mavlink_msg_auth_key_send(mavlink_channel_t chan, const char #endif } +#if MAVLINK_MSG_ID_AUTH_KEY_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_auth_key_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, const char *key) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + + _mav_put_char_array(buf, 0, key, 32); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_AUTH_KEY, buf, MAVLINK_MSG_ID_AUTH_KEY_LEN, MAVLINK_MSG_ID_AUTH_KEY_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_AUTH_KEY, buf, MAVLINK_MSG_ID_AUTH_KEY_LEN); +#endif +#else + mavlink_auth_key_t *packet = (mavlink_auth_key_t *)msgbuf; + + mav_array_memcpy(packet->key, key, sizeof(char)*32); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_AUTH_KEY, (const char *)packet, MAVLINK_MSG_ID_AUTH_KEY_LEN, MAVLINK_MSG_ID_AUTH_KEY_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_AUTH_KEY, (const char *)packet, MAVLINK_MSG_ID_AUTH_KEY_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE AUTH_KEY UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_battery_status.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_battery_status.h index 03e4d569e..faaabf9f7 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_battery_status.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_battery_status.h @@ -256,6 +256,58 @@ static inline void mavlink_msg_battery_status_send(mavlink_channel_t chan, uint8 #endif } +#if MAVLINK_MSG_ID_BATTERY_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_battery_status_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t accu_id, uint16_t voltage_cell_1, uint16_t voltage_cell_2, uint16_t voltage_cell_3, uint16_t voltage_cell_4, uint16_t voltage_cell_5, uint16_t voltage_cell_6, int16_t current_battery, int32_t current_consumed, int32_t energy_consumed, int8_t battery_remaining) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_int32_t(buf, 0, current_consumed); + _mav_put_int32_t(buf, 4, energy_consumed); + _mav_put_uint16_t(buf, 8, voltage_cell_1); + _mav_put_uint16_t(buf, 10, voltage_cell_2); + _mav_put_uint16_t(buf, 12, voltage_cell_3); + _mav_put_uint16_t(buf, 14, voltage_cell_4); + _mav_put_uint16_t(buf, 16, voltage_cell_5); + _mav_put_uint16_t(buf, 18, voltage_cell_6); + _mav_put_int16_t(buf, 20, current_battery); + _mav_put_uint8_t(buf, 22, accu_id); + _mav_put_int8_t(buf, 23, battery_remaining); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_BATTERY_STATUS, buf, MAVLINK_MSG_ID_BATTERY_STATUS_LEN, MAVLINK_MSG_ID_BATTERY_STATUS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_BATTERY_STATUS, buf, MAVLINK_MSG_ID_BATTERY_STATUS_LEN); +#endif +#else + mavlink_battery_status_t *packet = (mavlink_battery_status_t *)msgbuf; + packet->current_consumed = current_consumed; + packet->energy_consumed = energy_consumed; + packet->voltage_cell_1 = voltage_cell_1; + packet->voltage_cell_2 = voltage_cell_2; + packet->voltage_cell_3 = voltage_cell_3; + packet->voltage_cell_4 = voltage_cell_4; + packet->voltage_cell_5 = voltage_cell_5; + packet->voltage_cell_6 = voltage_cell_6; + packet->current_battery = current_battery; + packet->accu_id = accu_id; + packet->battery_remaining = battery_remaining; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_BATTERY_STATUS, (const char *)packet, MAVLINK_MSG_ID_BATTERY_STATUS_LEN, MAVLINK_MSG_ID_BATTERY_STATUS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_BATTERY_STATUS, (const char *)packet, MAVLINK_MSG_ID_BATTERY_STATUS_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE BATTERY_STATUS UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_change_operator_control.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_change_operator_control.h index 0b6de930d..3f0987f10 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_change_operator_control.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_change_operator_control.h @@ -173,6 +173,42 @@ static inline void mavlink_msg_change_operator_control_send(mavlink_channel_t ch #endif } +#if MAVLINK_MSG_ID_CHANGE_OPERATOR_CONTROL_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_change_operator_control_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t control_request, uint8_t version, const char *passkey) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint8_t(buf, 0, target_system); + _mav_put_uint8_t(buf, 1, control_request); + _mav_put_uint8_t(buf, 2, version); + _mav_put_char_array(buf, 3, passkey, 25); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_CHANGE_OPERATOR_CONTROL, buf, MAVLINK_MSG_ID_CHANGE_OPERATOR_CONTROL_LEN, MAVLINK_MSG_ID_CHANGE_OPERATOR_CONTROL_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_CHANGE_OPERATOR_CONTROL, buf, MAVLINK_MSG_ID_CHANGE_OPERATOR_CONTROL_LEN); +#endif +#else + mavlink_change_operator_control_t *packet = (mavlink_change_operator_control_t *)msgbuf; + packet->target_system = target_system; + packet->control_request = control_request; + packet->version = version; + mav_array_memcpy(packet->passkey, passkey, sizeof(char)*25); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_CHANGE_OPERATOR_CONTROL, (const char *)packet, MAVLINK_MSG_ID_CHANGE_OPERATOR_CONTROL_LEN, MAVLINK_MSG_ID_CHANGE_OPERATOR_CONTROL_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_CHANGE_OPERATOR_CONTROL, (const char *)packet, MAVLINK_MSG_ID_CHANGE_OPERATOR_CONTROL_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE CHANGE_OPERATOR_CONTROL UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_change_operator_control_ack.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_change_operator_control_ack.h index c6f6a28e4..768e7ed5c 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_change_operator_control_ack.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_change_operator_control_ack.h @@ -168,6 +168,42 @@ static inline void mavlink_msg_change_operator_control_ack_send(mavlink_channel_ #endif } +#if MAVLINK_MSG_ID_CHANGE_OPERATOR_CONTROL_ACK_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_change_operator_control_ack_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t gcs_system_id, uint8_t control_request, uint8_t ack) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint8_t(buf, 0, gcs_system_id); + _mav_put_uint8_t(buf, 1, control_request); + _mav_put_uint8_t(buf, 2, ack); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_CHANGE_OPERATOR_CONTROL_ACK, buf, MAVLINK_MSG_ID_CHANGE_OPERATOR_CONTROL_ACK_LEN, MAVLINK_MSG_ID_CHANGE_OPERATOR_CONTROL_ACK_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_CHANGE_OPERATOR_CONTROL_ACK, buf, MAVLINK_MSG_ID_CHANGE_OPERATOR_CONTROL_ACK_LEN); +#endif +#else + mavlink_change_operator_control_ack_t *packet = (mavlink_change_operator_control_ack_t *)msgbuf; + packet->gcs_system_id = gcs_system_id; + packet->control_request = control_request; + packet->ack = ack; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_CHANGE_OPERATOR_CONTROL_ACK, (const char *)packet, MAVLINK_MSG_ID_CHANGE_OPERATOR_CONTROL_ACK_LEN, MAVLINK_MSG_ID_CHANGE_OPERATOR_CONTROL_ACK_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_CHANGE_OPERATOR_CONTROL_ACK, (const char *)packet, MAVLINK_MSG_ID_CHANGE_OPERATOR_CONTROL_ACK_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE CHANGE_OPERATOR_CONTROL_ACK UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_command_ack.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_command_ack.h index dca2fe681..d3d163041 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_command_ack.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_command_ack.h @@ -157,6 +157,40 @@ static inline void mavlink_msg_command_ack_send(mavlink_channel_t chan, uint16_t #endif } +#if MAVLINK_MSG_ID_COMMAND_ACK_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_command_ack_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint16_t command, uint8_t result) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint16_t(buf, 0, command); + _mav_put_uint8_t(buf, 2, result); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_COMMAND_ACK, buf, MAVLINK_MSG_ID_COMMAND_ACK_LEN, MAVLINK_MSG_ID_COMMAND_ACK_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_COMMAND_ACK, buf, MAVLINK_MSG_ID_COMMAND_ACK_LEN); +#endif +#else + mavlink_command_ack_t *packet = (mavlink_command_ack_t *)msgbuf; + packet->command = command; + packet->result = result; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_COMMAND_ACK, (const char *)packet, MAVLINK_MSG_ID_COMMAND_ACK_LEN, MAVLINK_MSG_ID_COMMAND_ACK_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_COMMAND_ACK, (const char *)packet, MAVLINK_MSG_ID_COMMAND_ACK_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE COMMAND_ACK UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_command_long.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_command_long.h index 8f705c0dd..161896b97 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_command_long.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_command_long.h @@ -256,6 +256,58 @@ static inline void mavlink_msg_command_long_send(mavlink_channel_t chan, uint8_t #endif } +#if MAVLINK_MSG_ID_COMMAND_LONG_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_command_long_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, uint16_t command, uint8_t confirmation, float param1, float param2, float param3, float param4, float param5, float param6, float param7) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, param1); + _mav_put_float(buf, 4, param2); + _mav_put_float(buf, 8, param3); + _mav_put_float(buf, 12, param4); + _mav_put_float(buf, 16, param5); + _mav_put_float(buf, 20, param6); + _mav_put_float(buf, 24, param7); + _mav_put_uint16_t(buf, 28, command); + _mav_put_uint8_t(buf, 30, target_system); + _mav_put_uint8_t(buf, 31, target_component); + _mav_put_uint8_t(buf, 32, confirmation); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_COMMAND_LONG, buf, MAVLINK_MSG_ID_COMMAND_LONG_LEN, MAVLINK_MSG_ID_COMMAND_LONG_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_COMMAND_LONG, buf, MAVLINK_MSG_ID_COMMAND_LONG_LEN); +#endif +#else + mavlink_command_long_t *packet = (mavlink_command_long_t *)msgbuf; + packet->param1 = param1; + packet->param2 = param2; + packet->param3 = param3; + packet->param4 = param4; + packet->param5 = param5; + packet->param6 = param6; + packet->param7 = param7; + packet->command = command; + packet->target_system = target_system; + packet->target_component = target_component; + packet->confirmation = confirmation; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_COMMAND_LONG, (const char *)packet, MAVLINK_MSG_ID_COMMAND_LONG_LEN, MAVLINK_MSG_ID_COMMAND_LONG_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_COMMAND_LONG, (const char *)packet, MAVLINK_MSG_ID_COMMAND_LONG_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE COMMAND_LONG UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_data_stream.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_data_stream.h index dc0768e12..640ffebf4 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_data_stream.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_data_stream.h @@ -168,6 +168,42 @@ static inline void mavlink_msg_data_stream_send(mavlink_channel_t chan, uint8_t #endif } +#if MAVLINK_MSG_ID_DATA_STREAM_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_data_stream_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t stream_id, uint16_t message_rate, uint8_t on_off) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint16_t(buf, 0, message_rate); + _mav_put_uint8_t(buf, 2, stream_id); + _mav_put_uint8_t(buf, 3, on_off); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DATA_STREAM, buf, MAVLINK_MSG_ID_DATA_STREAM_LEN, MAVLINK_MSG_ID_DATA_STREAM_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DATA_STREAM, buf, MAVLINK_MSG_ID_DATA_STREAM_LEN); +#endif +#else + mavlink_data_stream_t *packet = (mavlink_data_stream_t *)msgbuf; + packet->message_rate = message_rate; + packet->stream_id = stream_id; + packet->on_off = on_off; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DATA_STREAM, (const char *)packet, MAVLINK_MSG_ID_DATA_STREAM_LEN, MAVLINK_MSG_ID_DATA_STREAM_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DATA_STREAM, (const char *)packet, MAVLINK_MSG_ID_DATA_STREAM_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE DATA_STREAM UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_data_transmission_handshake.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_data_transmission_handshake.h index fdd8fddd8..d84a73709 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_data_transmission_handshake.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_data_transmission_handshake.h @@ -212,6 +212,50 @@ static inline void mavlink_msg_data_transmission_handshake_send(mavlink_channel_ #endif } +#if MAVLINK_MSG_ID_DATA_TRANSMISSION_HANDSHAKE_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_data_transmission_handshake_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t type, uint32_t size, uint16_t width, uint16_t height, uint16_t packets, uint8_t payload, uint8_t jpg_quality) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, size); + _mav_put_uint16_t(buf, 4, width); + _mav_put_uint16_t(buf, 6, height); + _mav_put_uint16_t(buf, 8, packets); + _mav_put_uint8_t(buf, 10, type); + _mav_put_uint8_t(buf, 11, payload); + _mav_put_uint8_t(buf, 12, jpg_quality); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DATA_TRANSMISSION_HANDSHAKE, buf, MAVLINK_MSG_ID_DATA_TRANSMISSION_HANDSHAKE_LEN, MAVLINK_MSG_ID_DATA_TRANSMISSION_HANDSHAKE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DATA_TRANSMISSION_HANDSHAKE, buf, MAVLINK_MSG_ID_DATA_TRANSMISSION_HANDSHAKE_LEN); +#endif +#else + mavlink_data_transmission_handshake_t *packet = (mavlink_data_transmission_handshake_t *)msgbuf; + packet->size = size; + packet->width = width; + packet->height = height; + packet->packets = packets; + packet->type = type; + packet->payload = payload; + packet->jpg_quality = jpg_quality; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DATA_TRANSMISSION_HANDSHAKE, (const char *)packet, MAVLINK_MSG_ID_DATA_TRANSMISSION_HANDSHAKE_LEN, MAVLINK_MSG_ID_DATA_TRANSMISSION_HANDSHAKE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DATA_TRANSMISSION_HANDSHAKE, (const char *)packet, MAVLINK_MSG_ID_DATA_TRANSMISSION_HANDSHAKE_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE DATA_TRANSMISSION_HANDSHAKE UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_debug.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_debug.h index 9a6ed87ee..2102af862 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_debug.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_debug.h @@ -168,6 +168,42 @@ static inline void mavlink_msg_debug_send(mavlink_channel_t chan, uint32_t time_ #endif } +#if MAVLINK_MSG_ID_DEBUG_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_debug_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint32_t time_boot_ms, uint8_t ind, float value) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, time_boot_ms); + _mav_put_float(buf, 4, value); + _mav_put_uint8_t(buf, 8, ind); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DEBUG, buf, MAVLINK_MSG_ID_DEBUG_LEN, MAVLINK_MSG_ID_DEBUG_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DEBUG, buf, MAVLINK_MSG_ID_DEBUG_LEN); +#endif +#else + mavlink_debug_t *packet = (mavlink_debug_t *)msgbuf; + packet->time_boot_ms = time_boot_ms; + packet->value = value; + packet->ind = ind; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DEBUG, (const char *)packet, MAVLINK_MSG_ID_DEBUG_LEN, MAVLINK_MSG_ID_DEBUG_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DEBUG, (const char *)packet, MAVLINK_MSG_ID_DEBUG_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE DEBUG UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_debug_vect.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_debug_vect.h index 6cfc75212..67c339e89 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_debug_vect.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_debug_vect.h @@ -184,6 +184,44 @@ static inline void mavlink_msg_debug_vect_send(mavlink_channel_t chan, const cha #endif } +#if MAVLINK_MSG_ID_DEBUG_VECT_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_debug_vect_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, const char *name, uint64_t time_usec, float x, float y, float z) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint64_t(buf, 0, time_usec); + _mav_put_float(buf, 8, x); + _mav_put_float(buf, 12, y); + _mav_put_float(buf, 16, z); + _mav_put_char_array(buf, 20, name, 10); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DEBUG_VECT, buf, MAVLINK_MSG_ID_DEBUG_VECT_LEN, MAVLINK_MSG_ID_DEBUG_VECT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DEBUG_VECT, buf, MAVLINK_MSG_ID_DEBUG_VECT_LEN); +#endif +#else + mavlink_debug_vect_t *packet = (mavlink_debug_vect_t *)msgbuf; + packet->time_usec = time_usec; + packet->x = x; + packet->y = y; + packet->z = z; + mav_array_memcpy(packet->name, name, sizeof(char)*10); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DEBUG_VECT, (const char *)packet, MAVLINK_MSG_ID_DEBUG_VECT_LEN, MAVLINK_MSG_ID_DEBUG_VECT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DEBUG_VECT, (const char *)packet, MAVLINK_MSG_ID_DEBUG_VECT_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE DEBUG_VECT UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_distance_sensor.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_distance_sensor.h new file mode 100644 index 000000000..39b384396 --- /dev/null +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_distance_sensor.h @@ -0,0 +1,377 @@ +// MESSAGE DISTANCE_SENSOR PACKING + +#define MAVLINK_MSG_ID_DISTANCE_SENSOR 132 + +typedef struct __mavlink_distance_sensor_t +{ + uint32_t time_boot_ms; ///< Time since system boot + uint16_t min_distance; ///< Minimum distance the sensor can measure in centimeters + uint16_t max_distance; ///< Maximum distance the sensor can measure in centimeters + uint16_t current_distance; ///< Current distance reading + uint8_t type; ///< Type from MAV_DISTANCE_SENSOR enum. + uint8_t id; ///< Onboard ID of the sensor + uint8_t orientation; ///< Direction the sensor faces from FIXME enum. + uint8_t covariance; ///< Measurement covariance in centimeters, 0 for unknown / invalid readings +} mavlink_distance_sensor_t; + +#define MAVLINK_MSG_ID_DISTANCE_SENSOR_LEN 14 +#define MAVLINK_MSG_ID_132_LEN 14 + +#define MAVLINK_MSG_ID_DISTANCE_SENSOR_CRC 85 +#define MAVLINK_MSG_ID_132_CRC 85 + + + +#define MAVLINK_MESSAGE_INFO_DISTANCE_SENSOR { \ + "DISTANCE_SENSOR", \ + 8, \ + { { "time_boot_ms", NULL, MAVLINK_TYPE_UINT32_T, 0, 0, offsetof(mavlink_distance_sensor_t, time_boot_ms) }, \ + { "min_distance", NULL, MAVLINK_TYPE_UINT16_T, 0, 4, offsetof(mavlink_distance_sensor_t, min_distance) }, \ + { "max_distance", NULL, MAVLINK_TYPE_UINT16_T, 0, 6, offsetof(mavlink_distance_sensor_t, max_distance) }, \ + { "current_distance", NULL, MAVLINK_TYPE_UINT16_T, 0, 8, offsetof(mavlink_distance_sensor_t, current_distance) }, \ + { "type", NULL, MAVLINK_TYPE_UINT8_T, 0, 10, offsetof(mavlink_distance_sensor_t, type) }, \ + { "id", NULL, MAVLINK_TYPE_UINT8_T, 0, 11, offsetof(mavlink_distance_sensor_t, id) }, \ + { "orientation", NULL, MAVLINK_TYPE_UINT8_T, 0, 12, offsetof(mavlink_distance_sensor_t, orientation) }, \ + { "covariance", NULL, MAVLINK_TYPE_UINT8_T, 0, 13, offsetof(mavlink_distance_sensor_t, covariance) }, \ + } \ +} + + +/** + * @brief Pack a distance_sensor message + * @param system_id ID of this system + * @param component_id ID of this component (e.g. 200 for IMU) + * @param msg The MAVLink message to compress the data into + * + * @param time_boot_ms Time since system boot + * @param type Type from MAV_DISTANCE_SENSOR enum. + * @param id Onboard ID of the sensor + * @param orientation Direction the sensor faces from FIXME enum. + * @param min_distance Minimum distance the sensor can measure in centimeters + * @param max_distance Maximum distance the sensor can measure in centimeters + * @param current_distance Current distance reading + * @param covariance Measurement covariance in centimeters, 0 for unknown / invalid readings + * @return length of the message in bytes (excluding serial stream start sign) + */ +static inline uint16_t mavlink_msg_distance_sensor_pack(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, + uint32_t time_boot_ms, uint8_t type, uint8_t id, uint8_t orientation, uint16_t min_distance, uint16_t max_distance, uint16_t current_distance, uint8_t covariance) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char buf[MAVLINK_MSG_ID_DISTANCE_SENSOR_LEN]; + _mav_put_uint32_t(buf, 0, time_boot_ms); + _mav_put_uint16_t(buf, 4, min_distance); + _mav_put_uint16_t(buf, 6, max_distance); + _mav_put_uint16_t(buf, 8, current_distance); + _mav_put_uint8_t(buf, 10, type); + _mav_put_uint8_t(buf, 11, id); + _mav_put_uint8_t(buf, 12, orientation); + _mav_put_uint8_t(buf, 13, covariance); + + memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, MAVLINK_MSG_ID_DISTANCE_SENSOR_LEN); +#else + mavlink_distance_sensor_t packet; + packet.time_boot_ms = time_boot_ms; + packet.min_distance = min_distance; + packet.max_distance = max_distance; + packet.current_distance = current_distance; + packet.type = type; + packet.id = id; + packet.orientation = orientation; + packet.covariance = covariance; + + memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, MAVLINK_MSG_ID_DISTANCE_SENSOR_LEN); +#endif + + msg->msgid = MAVLINK_MSG_ID_DISTANCE_SENSOR; +#if MAVLINK_CRC_EXTRA + return mavlink_finalize_message(msg, system_id, component_id, MAVLINK_MSG_ID_DISTANCE_SENSOR_LEN, MAVLINK_MSG_ID_DISTANCE_SENSOR_CRC); +#else + return mavlink_finalize_message(msg, system_id, component_id, MAVLINK_MSG_ID_DISTANCE_SENSOR_LEN); +#endif +} + +/** + * @brief Pack a distance_sensor message on a channel + * @param system_id ID of this system + * @param component_id ID of this component (e.g. 200 for IMU) + * @param chan The MAVLink channel this message will be sent over + * @param msg The MAVLink message to compress the data into + * @param time_boot_ms Time since system boot + * @param type Type from MAV_DISTANCE_SENSOR enum. + * @param id Onboard ID of the sensor + * @param orientation Direction the sensor faces from FIXME enum. + * @param min_distance Minimum distance the sensor can measure in centimeters + * @param max_distance Maximum distance the sensor can measure in centimeters + * @param current_distance Current distance reading + * @param covariance Measurement covariance in centimeters, 0 for unknown / invalid readings + * @return length of the message in bytes (excluding serial stream start sign) + */ +static inline uint16_t mavlink_msg_distance_sensor_pack_chan(uint8_t system_id, uint8_t component_id, uint8_t chan, + mavlink_message_t* msg, + uint32_t time_boot_ms,uint8_t type,uint8_t id,uint8_t orientation,uint16_t min_distance,uint16_t max_distance,uint16_t current_distance,uint8_t covariance) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char buf[MAVLINK_MSG_ID_DISTANCE_SENSOR_LEN]; + _mav_put_uint32_t(buf, 0, time_boot_ms); + _mav_put_uint16_t(buf, 4, min_distance); + _mav_put_uint16_t(buf, 6, max_distance); + _mav_put_uint16_t(buf, 8, current_distance); + _mav_put_uint8_t(buf, 10, type); + _mav_put_uint8_t(buf, 11, id); + _mav_put_uint8_t(buf, 12, orientation); + _mav_put_uint8_t(buf, 13, covariance); + + memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, MAVLINK_MSG_ID_DISTANCE_SENSOR_LEN); +#else + mavlink_distance_sensor_t packet; + packet.time_boot_ms = time_boot_ms; + packet.min_distance = min_distance; + packet.max_distance = max_distance; + packet.current_distance = current_distance; + packet.type = type; + packet.id = id; + packet.orientation = orientation; + packet.covariance = covariance; + + memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, MAVLINK_MSG_ID_DISTANCE_SENSOR_LEN); +#endif + + msg->msgid = MAVLINK_MSG_ID_DISTANCE_SENSOR; +#if MAVLINK_CRC_EXTRA + return mavlink_finalize_message_chan(msg, system_id, component_id, chan, MAVLINK_MSG_ID_DISTANCE_SENSOR_LEN, MAVLINK_MSG_ID_DISTANCE_SENSOR_CRC); +#else + return mavlink_finalize_message_chan(msg, system_id, component_id, chan, MAVLINK_MSG_ID_DISTANCE_SENSOR_LEN); +#endif +} + +/** + * @brief Encode a distance_sensor struct + * + * @param system_id ID of this system + * @param component_id ID of this component (e.g. 200 for IMU) + * @param msg The MAVLink message to compress the data into + * @param distance_sensor C-struct to read the message contents from + */ +static inline uint16_t mavlink_msg_distance_sensor_encode(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, const mavlink_distance_sensor_t* distance_sensor) +{ + return mavlink_msg_distance_sensor_pack(system_id, component_id, msg, distance_sensor->time_boot_ms, distance_sensor->type, distance_sensor->id, distance_sensor->orientation, distance_sensor->min_distance, distance_sensor->max_distance, distance_sensor->current_distance, distance_sensor->covariance); +} + +/** + * @brief Encode a distance_sensor struct on a channel + * + * @param system_id ID of this system + * @param component_id ID of this component (e.g. 200 for IMU) + * @param chan The MAVLink channel this message will be sent over + * @param msg The MAVLink message to compress the data into + * @param distance_sensor C-struct to read the message contents from + */ +static inline uint16_t mavlink_msg_distance_sensor_encode_chan(uint8_t system_id, uint8_t component_id, uint8_t chan, mavlink_message_t* msg, const mavlink_distance_sensor_t* distance_sensor) +{ + return mavlink_msg_distance_sensor_pack_chan(system_id, component_id, chan, msg, distance_sensor->time_boot_ms, distance_sensor->type, distance_sensor->id, distance_sensor->orientation, distance_sensor->min_distance, distance_sensor->max_distance, distance_sensor->current_distance, distance_sensor->covariance); +} + +/** + * @brief Send a distance_sensor message + * @param chan MAVLink channel to send the message + * + * @param time_boot_ms Time since system boot + * @param type Type from MAV_DISTANCE_SENSOR enum. + * @param id Onboard ID of the sensor + * @param orientation Direction the sensor faces from FIXME enum. + * @param min_distance Minimum distance the sensor can measure in centimeters + * @param max_distance Maximum distance the sensor can measure in centimeters + * @param current_distance Current distance reading + * @param covariance Measurement covariance in centimeters, 0 for unknown / invalid readings + */ +#ifdef MAVLINK_USE_CONVENIENCE_FUNCTIONS + +static inline void mavlink_msg_distance_sensor_send(mavlink_channel_t chan, uint32_t time_boot_ms, uint8_t type, uint8_t id, uint8_t orientation, uint16_t min_distance, uint16_t max_distance, uint16_t current_distance, uint8_t covariance) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char buf[MAVLINK_MSG_ID_DISTANCE_SENSOR_LEN]; + _mav_put_uint32_t(buf, 0, time_boot_ms); + _mav_put_uint16_t(buf, 4, min_distance); + _mav_put_uint16_t(buf, 6, max_distance); + _mav_put_uint16_t(buf, 8, current_distance); + _mav_put_uint8_t(buf, 10, type); + _mav_put_uint8_t(buf, 11, id); + _mav_put_uint8_t(buf, 12, orientation); + _mav_put_uint8_t(buf, 13, covariance); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DISTANCE_SENSOR, buf, MAVLINK_MSG_ID_DISTANCE_SENSOR_LEN, MAVLINK_MSG_ID_DISTANCE_SENSOR_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DISTANCE_SENSOR, buf, MAVLINK_MSG_ID_DISTANCE_SENSOR_LEN); +#endif +#else + mavlink_distance_sensor_t packet; + packet.time_boot_ms = time_boot_ms; + packet.min_distance = min_distance; + packet.max_distance = max_distance; + packet.current_distance = current_distance; + packet.type = type; + packet.id = id; + packet.orientation = orientation; + packet.covariance = covariance; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DISTANCE_SENSOR, (const char *)&packet, MAVLINK_MSG_ID_DISTANCE_SENSOR_LEN, MAVLINK_MSG_ID_DISTANCE_SENSOR_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DISTANCE_SENSOR, (const char *)&packet, MAVLINK_MSG_ID_DISTANCE_SENSOR_LEN); +#endif +#endif +} + +#if MAVLINK_MSG_ID_DISTANCE_SENSOR_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_distance_sensor_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint32_t time_boot_ms, uint8_t type, uint8_t id, uint8_t orientation, uint16_t min_distance, uint16_t max_distance, uint16_t current_distance, uint8_t covariance) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, time_boot_ms); + _mav_put_uint16_t(buf, 4, min_distance); + _mav_put_uint16_t(buf, 6, max_distance); + _mav_put_uint16_t(buf, 8, current_distance); + _mav_put_uint8_t(buf, 10, type); + _mav_put_uint8_t(buf, 11, id); + _mav_put_uint8_t(buf, 12, orientation); + _mav_put_uint8_t(buf, 13, covariance); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DISTANCE_SENSOR, buf, MAVLINK_MSG_ID_DISTANCE_SENSOR_LEN, MAVLINK_MSG_ID_DISTANCE_SENSOR_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DISTANCE_SENSOR, buf, MAVLINK_MSG_ID_DISTANCE_SENSOR_LEN); +#endif +#else + mavlink_distance_sensor_t *packet = (mavlink_distance_sensor_t *)msgbuf; + packet->time_boot_ms = time_boot_ms; + packet->min_distance = min_distance; + packet->max_distance = max_distance; + packet->current_distance = current_distance; + packet->type = type; + packet->id = id; + packet->orientation = orientation; + packet->covariance = covariance; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DISTANCE_SENSOR, (const char *)packet, MAVLINK_MSG_ID_DISTANCE_SENSOR_LEN, MAVLINK_MSG_ID_DISTANCE_SENSOR_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DISTANCE_SENSOR, (const char *)packet, MAVLINK_MSG_ID_DISTANCE_SENSOR_LEN); +#endif +#endif +} +#endif + +#endif + +// MESSAGE DISTANCE_SENSOR UNPACKING + + +/** + * @brief Get field time_boot_ms from distance_sensor message + * + * @return Time since system boot + */ +static inline uint32_t mavlink_msg_distance_sensor_get_time_boot_ms(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint32_t(msg, 0); +} + +/** + * @brief Get field type from distance_sensor message + * + * @return Type from MAV_DISTANCE_SENSOR enum. + */ +static inline uint8_t mavlink_msg_distance_sensor_get_type(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint8_t(msg, 10); +} + +/** + * @brief Get field id from distance_sensor message + * + * @return Onboard ID of the sensor + */ +static inline uint8_t mavlink_msg_distance_sensor_get_id(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint8_t(msg, 11); +} + +/** + * @brief Get field orientation from distance_sensor message + * + * @return Direction the sensor faces from FIXME enum. + */ +static inline uint8_t mavlink_msg_distance_sensor_get_orientation(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint8_t(msg, 12); +} + +/** + * @brief Get field min_distance from distance_sensor message + * + * @return Minimum distance the sensor can measure in centimeters + */ +static inline uint16_t mavlink_msg_distance_sensor_get_min_distance(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint16_t(msg, 4); +} + +/** + * @brief Get field max_distance from distance_sensor message + * + * @return Maximum distance the sensor can measure in centimeters + */ +static inline uint16_t mavlink_msg_distance_sensor_get_max_distance(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint16_t(msg, 6); +} + +/** + * @brief Get field current_distance from distance_sensor message + * + * @return Current distance reading + */ +static inline uint16_t mavlink_msg_distance_sensor_get_current_distance(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint16_t(msg, 8); +} + +/** + * @brief Get field covariance from distance_sensor message + * + * @return Measurement covariance in centimeters, 0 for unknown / invalid readings + */ +static inline uint8_t mavlink_msg_distance_sensor_get_covariance(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint8_t(msg, 13); +} + +/** + * @brief Decode a distance_sensor message into a struct + * + * @param msg The message to decode + * @param distance_sensor C-struct to decode the message contents into + */ +static inline void mavlink_msg_distance_sensor_decode(const mavlink_message_t* msg, mavlink_distance_sensor_t* distance_sensor) +{ +#if MAVLINK_NEED_BYTE_SWAP + distance_sensor->time_boot_ms = mavlink_msg_distance_sensor_get_time_boot_ms(msg); + distance_sensor->min_distance = mavlink_msg_distance_sensor_get_min_distance(msg); + distance_sensor->max_distance = mavlink_msg_distance_sensor_get_max_distance(msg); + distance_sensor->current_distance = mavlink_msg_distance_sensor_get_current_distance(msg); + distance_sensor->type = mavlink_msg_distance_sensor_get_type(msg); + distance_sensor->id = mavlink_msg_distance_sensor_get_id(msg); + distance_sensor->orientation = mavlink_msg_distance_sensor_get_orientation(msg); + distance_sensor->covariance = mavlink_msg_distance_sensor_get_covariance(msg); +#else + memcpy(distance_sensor, _MAV_PAYLOAD(msg), MAVLINK_MSG_ID_DISTANCE_SENSOR_LEN); +#endif +} diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_encapsulated_data.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_encapsulated_data.h index 5900ea838..dacd7c9f4 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_encapsulated_data.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_encapsulated_data.h @@ -151,6 +151,38 @@ static inline void mavlink_msg_encapsulated_data_send(mavlink_channel_t chan, ui #endif } +#if MAVLINK_MSG_ID_ENCAPSULATED_DATA_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_encapsulated_data_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint16_t seqnr, const uint8_t *data) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint16_t(buf, 0, seqnr); + _mav_put_uint8_t_array(buf, 2, data, 253); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ENCAPSULATED_DATA, buf, MAVLINK_MSG_ID_ENCAPSULATED_DATA_LEN, MAVLINK_MSG_ID_ENCAPSULATED_DATA_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ENCAPSULATED_DATA, buf, MAVLINK_MSG_ID_ENCAPSULATED_DATA_LEN); +#endif +#else + mavlink_encapsulated_data_t *packet = (mavlink_encapsulated_data_t *)msgbuf; + packet->seqnr = seqnr; + mav_array_memcpy(packet->data, data, sizeof(uint8_t)*253); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ENCAPSULATED_DATA, (const char *)packet, MAVLINK_MSG_ID_ENCAPSULATED_DATA_LEN, MAVLINK_MSG_ID_ENCAPSULATED_DATA_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ENCAPSULATED_DATA, (const char *)packet, MAVLINK_MSG_ID_ENCAPSULATED_DATA_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE ENCAPSULATED_DATA UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_file_transfer_dir_list.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_file_transfer_dir_list.h index 4f31698d5..81c7031ce 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_file_transfer_dir_list.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_file_transfer_dir_list.h @@ -162,6 +162,40 @@ static inline void mavlink_msg_file_transfer_dir_list_send(mavlink_channel_t cha #endif } +#if MAVLINK_MSG_ID_FILE_TRANSFER_DIR_LIST_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_file_transfer_dir_list_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint64_t transfer_uid, const char *dir_path, uint8_t flags) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint64_t(buf, 0, transfer_uid); + _mav_put_uint8_t(buf, 248, flags); + _mav_put_char_array(buf, 8, dir_path, 240); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FILE_TRANSFER_DIR_LIST, buf, MAVLINK_MSG_ID_FILE_TRANSFER_DIR_LIST_LEN, MAVLINK_MSG_ID_FILE_TRANSFER_DIR_LIST_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FILE_TRANSFER_DIR_LIST, buf, MAVLINK_MSG_ID_FILE_TRANSFER_DIR_LIST_LEN); +#endif +#else + mavlink_file_transfer_dir_list_t *packet = (mavlink_file_transfer_dir_list_t *)msgbuf; + packet->transfer_uid = transfer_uid; + packet->flags = flags; + mav_array_memcpy(packet->dir_path, dir_path, sizeof(char)*240); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FILE_TRANSFER_DIR_LIST, (const char *)packet, MAVLINK_MSG_ID_FILE_TRANSFER_DIR_LIST_LEN, MAVLINK_MSG_ID_FILE_TRANSFER_DIR_LIST_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FILE_TRANSFER_DIR_LIST, (const char *)packet, MAVLINK_MSG_ID_FILE_TRANSFER_DIR_LIST_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE FILE_TRANSFER_DIR_LIST UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_file_transfer_res.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_file_transfer_res.h index fc6247fac..04981fa85 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_file_transfer_res.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_file_transfer_res.h @@ -157,6 +157,40 @@ static inline void mavlink_msg_file_transfer_res_send(mavlink_channel_t chan, ui #endif } +#if MAVLINK_MSG_ID_FILE_TRANSFER_RES_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_file_transfer_res_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint64_t transfer_uid, uint8_t result) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint64_t(buf, 0, transfer_uid); + _mav_put_uint8_t(buf, 8, result); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FILE_TRANSFER_RES, buf, MAVLINK_MSG_ID_FILE_TRANSFER_RES_LEN, MAVLINK_MSG_ID_FILE_TRANSFER_RES_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FILE_TRANSFER_RES, buf, MAVLINK_MSG_ID_FILE_TRANSFER_RES_LEN); +#endif +#else + mavlink_file_transfer_res_t *packet = (mavlink_file_transfer_res_t *)msgbuf; + packet->transfer_uid = transfer_uid; + packet->result = result; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FILE_TRANSFER_RES, (const char *)packet, MAVLINK_MSG_ID_FILE_TRANSFER_RES_LEN, MAVLINK_MSG_ID_FILE_TRANSFER_RES_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FILE_TRANSFER_RES, (const char *)packet, MAVLINK_MSG_ID_FILE_TRANSFER_RES_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE FILE_TRANSFER_RES UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_file_transfer_start.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_file_transfer_start.h index 05be77339..7b1fba519 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_file_transfer_start.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_file_transfer_start.h @@ -184,6 +184,44 @@ static inline void mavlink_msg_file_transfer_start_send(mavlink_channel_t chan, #endif } +#if MAVLINK_MSG_ID_FILE_TRANSFER_START_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_file_transfer_start_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint64_t transfer_uid, const char *dest_path, uint8_t direction, uint32_t file_size, uint8_t flags) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint64_t(buf, 0, transfer_uid); + _mav_put_uint32_t(buf, 8, file_size); + _mav_put_uint8_t(buf, 252, direction); + _mav_put_uint8_t(buf, 253, flags); + _mav_put_char_array(buf, 12, dest_path, 240); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FILE_TRANSFER_START, buf, MAVLINK_MSG_ID_FILE_TRANSFER_START_LEN, MAVLINK_MSG_ID_FILE_TRANSFER_START_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FILE_TRANSFER_START, buf, MAVLINK_MSG_ID_FILE_TRANSFER_START_LEN); +#endif +#else + mavlink_file_transfer_start_t *packet = (mavlink_file_transfer_start_t *)msgbuf; + packet->transfer_uid = transfer_uid; + packet->file_size = file_size; + packet->direction = direction; + packet->flags = flags; + mav_array_memcpy(packet->dest_path, dest_path, sizeof(char)*240); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FILE_TRANSFER_START, (const char *)packet, MAVLINK_MSG_ID_FILE_TRANSFER_START_LEN, MAVLINK_MSG_ID_FILE_TRANSFER_START_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FILE_TRANSFER_START, (const char *)packet, MAVLINK_MSG_ID_FILE_TRANSFER_START_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE FILE_TRANSFER_START UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_global_position_int.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_global_position_int.h index 7ed3d2a63..ba15bf365 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_global_position_int.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_global_position_int.h @@ -234,6 +234,54 @@ static inline void mavlink_msg_global_position_int_send(mavlink_channel_t chan, #endif } +#if MAVLINK_MSG_ID_GLOBAL_POSITION_INT_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_global_position_int_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint32_t time_boot_ms, int32_t lat, int32_t lon, int32_t alt, int32_t relative_alt, int16_t vx, int16_t vy, int16_t vz, uint16_t hdg) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, time_boot_ms); + _mav_put_int32_t(buf, 4, lat); + _mav_put_int32_t(buf, 8, lon); + _mav_put_int32_t(buf, 12, alt); + _mav_put_int32_t(buf, 16, relative_alt); + _mav_put_int16_t(buf, 20, vx); + _mav_put_int16_t(buf, 22, vy); + _mav_put_int16_t(buf, 24, vz); + _mav_put_uint16_t(buf, 26, hdg); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GLOBAL_POSITION_INT, buf, MAVLINK_MSG_ID_GLOBAL_POSITION_INT_LEN, MAVLINK_MSG_ID_GLOBAL_POSITION_INT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GLOBAL_POSITION_INT, buf, MAVLINK_MSG_ID_GLOBAL_POSITION_INT_LEN); +#endif +#else + mavlink_global_position_int_t *packet = (mavlink_global_position_int_t *)msgbuf; + packet->time_boot_ms = time_boot_ms; + packet->lat = lat; + packet->lon = lon; + packet->alt = alt; + packet->relative_alt = relative_alt; + packet->vx = vx; + packet->vy = vy; + packet->vz = vz; + packet->hdg = hdg; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GLOBAL_POSITION_INT, (const char *)packet, MAVLINK_MSG_ID_GLOBAL_POSITION_INT_LEN, MAVLINK_MSG_ID_GLOBAL_POSITION_INT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GLOBAL_POSITION_INT, (const char *)packet, MAVLINK_MSG_ID_GLOBAL_POSITION_INT_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE GLOBAL_POSITION_INT UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_global_position_setpoint_int.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_global_position_setpoint_int.h index 1a1c97199..77d735cf4 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_global_position_setpoint_int.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_global_position_setpoint_int.h @@ -190,6 +190,46 @@ static inline void mavlink_msg_global_position_setpoint_int_send(mavlink_channel #endif } +#if MAVLINK_MSG_ID_GLOBAL_POSITION_SETPOINT_INT_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_global_position_setpoint_int_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t coordinate_frame, int32_t latitude, int32_t longitude, int32_t altitude, int16_t yaw) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_int32_t(buf, 0, latitude); + _mav_put_int32_t(buf, 4, longitude); + _mav_put_int32_t(buf, 8, altitude); + _mav_put_int16_t(buf, 12, yaw); + _mav_put_uint8_t(buf, 14, coordinate_frame); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GLOBAL_POSITION_SETPOINT_INT, buf, MAVLINK_MSG_ID_GLOBAL_POSITION_SETPOINT_INT_LEN, MAVLINK_MSG_ID_GLOBAL_POSITION_SETPOINT_INT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GLOBAL_POSITION_SETPOINT_INT, buf, MAVLINK_MSG_ID_GLOBAL_POSITION_SETPOINT_INT_LEN); +#endif +#else + mavlink_global_position_setpoint_int_t *packet = (mavlink_global_position_setpoint_int_t *)msgbuf; + packet->latitude = latitude; + packet->longitude = longitude; + packet->altitude = altitude; + packet->yaw = yaw; + packet->coordinate_frame = coordinate_frame; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GLOBAL_POSITION_SETPOINT_INT, (const char *)packet, MAVLINK_MSG_ID_GLOBAL_POSITION_SETPOINT_INT_LEN, MAVLINK_MSG_ID_GLOBAL_POSITION_SETPOINT_INT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GLOBAL_POSITION_SETPOINT_INT, (const char *)packet, MAVLINK_MSG_ID_GLOBAL_POSITION_SETPOINT_INT_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE GLOBAL_POSITION_SETPOINT_INT UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_global_vision_position_estimate.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_global_vision_position_estimate.h index f7be74c91..b2b75d7ef 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_global_vision_position_estimate.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_global_vision_position_estimate.h @@ -212,6 +212,50 @@ static inline void mavlink_msg_global_vision_position_estimate_send(mavlink_chan #endif } +#if MAVLINK_MSG_ID_GLOBAL_VISION_POSITION_ESTIMATE_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_global_vision_position_estimate_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint64_t usec, float x, float y, float z, float roll, float pitch, float yaw) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint64_t(buf, 0, usec); + _mav_put_float(buf, 8, x); + _mav_put_float(buf, 12, y); + _mav_put_float(buf, 16, z); + _mav_put_float(buf, 20, roll); + _mav_put_float(buf, 24, pitch); + _mav_put_float(buf, 28, yaw); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GLOBAL_VISION_POSITION_ESTIMATE, buf, MAVLINK_MSG_ID_GLOBAL_VISION_POSITION_ESTIMATE_LEN, MAVLINK_MSG_ID_GLOBAL_VISION_POSITION_ESTIMATE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GLOBAL_VISION_POSITION_ESTIMATE, buf, MAVLINK_MSG_ID_GLOBAL_VISION_POSITION_ESTIMATE_LEN); +#endif +#else + mavlink_global_vision_position_estimate_t *packet = (mavlink_global_vision_position_estimate_t *)msgbuf; + packet->usec = usec; + packet->x = x; + packet->y = y; + packet->z = z; + packet->roll = roll; + packet->pitch = pitch; + packet->yaw = yaw; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GLOBAL_VISION_POSITION_ESTIMATE, (const char *)packet, MAVLINK_MSG_ID_GLOBAL_VISION_POSITION_ESTIMATE_LEN, MAVLINK_MSG_ID_GLOBAL_VISION_POSITION_ESTIMATE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GLOBAL_VISION_POSITION_ESTIMATE, (const char *)packet, MAVLINK_MSG_ID_GLOBAL_VISION_POSITION_ESTIMATE_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE GLOBAL_VISION_POSITION_ESTIMATE UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_gps2_raw.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_gps2_raw.h index 17e5bd002..b184e7c9c 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_gps2_raw.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_gps2_raw.h @@ -267,6 +267,60 @@ static inline void mavlink_msg_gps2_raw_send(mavlink_channel_t chan, uint64_t ti #endif } +#if MAVLINK_MSG_ID_GPS2_RAW_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_gps2_raw_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint64_t time_usec, uint8_t fix_type, int32_t lat, int32_t lon, int32_t alt, uint16_t eph, uint16_t epv, uint16_t vel, uint16_t cog, uint8_t satellites_visible, uint8_t dgps_numch, uint32_t dgps_age) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint64_t(buf, 0, time_usec); + _mav_put_int32_t(buf, 8, lat); + _mav_put_int32_t(buf, 12, lon); + _mav_put_int32_t(buf, 16, alt); + _mav_put_uint32_t(buf, 20, dgps_age); + _mav_put_uint16_t(buf, 24, eph); + _mav_put_uint16_t(buf, 26, epv); + _mav_put_uint16_t(buf, 28, vel); + _mav_put_uint16_t(buf, 30, cog); + _mav_put_uint8_t(buf, 32, fix_type); + _mav_put_uint8_t(buf, 33, satellites_visible); + _mav_put_uint8_t(buf, 34, dgps_numch); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GPS2_RAW, buf, MAVLINK_MSG_ID_GPS2_RAW_LEN, MAVLINK_MSG_ID_GPS2_RAW_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GPS2_RAW, buf, MAVLINK_MSG_ID_GPS2_RAW_LEN); +#endif +#else + mavlink_gps2_raw_t *packet = (mavlink_gps2_raw_t *)msgbuf; + packet->time_usec = time_usec; + packet->lat = lat; + packet->lon = lon; + packet->alt = alt; + packet->dgps_age = dgps_age; + packet->eph = eph; + packet->epv = epv; + packet->vel = vel; + packet->cog = cog; + packet->fix_type = fix_type; + packet->satellites_visible = satellites_visible; + packet->dgps_numch = dgps_numch; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GPS2_RAW, (const char *)packet, MAVLINK_MSG_ID_GPS2_RAW_LEN, MAVLINK_MSG_ID_GPS2_RAW_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GPS2_RAW, (const char *)packet, MAVLINK_MSG_ID_GPS2_RAW_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE GPS2_RAW UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_gps_global_origin.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_gps_global_origin.h index 016e9cb0e..1589c8ca5 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_gps_global_origin.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_gps_global_origin.h @@ -168,6 +168,42 @@ static inline void mavlink_msg_gps_global_origin_send(mavlink_channel_t chan, in #endif } +#if MAVLINK_MSG_ID_GPS_GLOBAL_ORIGIN_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_gps_global_origin_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, int32_t latitude, int32_t longitude, int32_t altitude) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_int32_t(buf, 0, latitude); + _mav_put_int32_t(buf, 4, longitude); + _mav_put_int32_t(buf, 8, altitude); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GPS_GLOBAL_ORIGIN, buf, MAVLINK_MSG_ID_GPS_GLOBAL_ORIGIN_LEN, MAVLINK_MSG_ID_GPS_GLOBAL_ORIGIN_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GPS_GLOBAL_ORIGIN, buf, MAVLINK_MSG_ID_GPS_GLOBAL_ORIGIN_LEN); +#endif +#else + mavlink_gps_global_origin_t *packet = (mavlink_gps_global_origin_t *)msgbuf; + packet->latitude = latitude; + packet->longitude = longitude; + packet->altitude = altitude; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GPS_GLOBAL_ORIGIN, (const char *)packet, MAVLINK_MSG_ID_GPS_GLOBAL_ORIGIN_LEN, MAVLINK_MSG_ID_GPS_GLOBAL_ORIGIN_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GPS_GLOBAL_ORIGIN, (const char *)packet, MAVLINK_MSG_ID_GPS_GLOBAL_ORIGIN_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE GPS_GLOBAL_ORIGIN UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_gps_inject_data.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_gps_inject_data.h index 485d8a4af..362e2d7b9 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_gps_inject_data.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_gps_inject_data.h @@ -173,6 +173,42 @@ static inline void mavlink_msg_gps_inject_data_send(mavlink_channel_t chan, uint #endif } +#if MAVLINK_MSG_ID_GPS_INJECT_DATA_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_gps_inject_data_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, uint8_t len, const uint8_t *data) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint8_t(buf, 0, target_system); + _mav_put_uint8_t(buf, 1, target_component); + _mav_put_uint8_t(buf, 2, len); + _mav_put_uint8_t_array(buf, 3, data, 110); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GPS_INJECT_DATA, buf, MAVLINK_MSG_ID_GPS_INJECT_DATA_LEN, MAVLINK_MSG_ID_GPS_INJECT_DATA_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GPS_INJECT_DATA, buf, MAVLINK_MSG_ID_GPS_INJECT_DATA_LEN); +#endif +#else + mavlink_gps_inject_data_t *packet = (mavlink_gps_inject_data_t *)msgbuf; + packet->target_system = target_system; + packet->target_component = target_component; + packet->len = len; + mav_array_memcpy(packet->data, data, sizeof(uint8_t)*110); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GPS_INJECT_DATA, (const char *)packet, MAVLINK_MSG_ID_GPS_INJECT_DATA_LEN, MAVLINK_MSG_ID_GPS_INJECT_DATA_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GPS_INJECT_DATA, (const char *)packet, MAVLINK_MSG_ID_GPS_INJECT_DATA_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE GPS_INJECT_DATA UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_gps_raw_int.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_gps_raw_int.h index a105f8cda..b53996206 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_gps_raw_int.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_gps_raw_int.h @@ -245,6 +245,56 @@ static inline void mavlink_msg_gps_raw_int_send(mavlink_channel_t chan, uint64_t #endif } +#if MAVLINK_MSG_ID_GPS_RAW_INT_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_gps_raw_int_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint64_t time_usec, uint8_t fix_type, int32_t lat, int32_t lon, int32_t alt, uint16_t eph, uint16_t epv, uint16_t vel, uint16_t cog, uint8_t satellites_visible) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint64_t(buf, 0, time_usec); + _mav_put_int32_t(buf, 8, lat); + _mav_put_int32_t(buf, 12, lon); + _mav_put_int32_t(buf, 16, alt); + _mav_put_uint16_t(buf, 20, eph); + _mav_put_uint16_t(buf, 22, epv); + _mav_put_uint16_t(buf, 24, vel); + _mav_put_uint16_t(buf, 26, cog); + _mav_put_uint8_t(buf, 28, fix_type); + _mav_put_uint8_t(buf, 29, satellites_visible); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GPS_RAW_INT, buf, MAVLINK_MSG_ID_GPS_RAW_INT_LEN, MAVLINK_MSG_ID_GPS_RAW_INT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GPS_RAW_INT, buf, MAVLINK_MSG_ID_GPS_RAW_INT_LEN); +#endif +#else + mavlink_gps_raw_int_t *packet = (mavlink_gps_raw_int_t *)msgbuf; + packet->time_usec = time_usec; + packet->lat = lat; + packet->lon = lon; + packet->alt = alt; + packet->eph = eph; + packet->epv = epv; + packet->vel = vel; + packet->cog = cog; + packet->fix_type = fix_type; + packet->satellites_visible = satellites_visible; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GPS_RAW_INT, (const char *)packet, MAVLINK_MSG_ID_GPS_RAW_INT_LEN, MAVLINK_MSG_ID_GPS_RAW_INT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GPS_RAW_INT, (const char *)packet, MAVLINK_MSG_ID_GPS_RAW_INT_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE GPS_RAW_INT UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_gps_status.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_gps_status.h index 28d6b57d1..10659d0dd 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_gps_status.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_gps_status.h @@ -199,6 +199,46 @@ static inline void mavlink_msg_gps_status_send(mavlink_channel_t chan, uint8_t s #endif } +#if MAVLINK_MSG_ID_GPS_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_gps_status_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t satellites_visible, const uint8_t *satellite_prn, const uint8_t *satellite_used, const uint8_t *satellite_elevation, const uint8_t *satellite_azimuth, const uint8_t *satellite_snr) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint8_t(buf, 0, satellites_visible); + _mav_put_uint8_t_array(buf, 1, satellite_prn, 20); + _mav_put_uint8_t_array(buf, 21, satellite_used, 20); + _mav_put_uint8_t_array(buf, 41, satellite_elevation, 20); + _mav_put_uint8_t_array(buf, 61, satellite_azimuth, 20); + _mav_put_uint8_t_array(buf, 81, satellite_snr, 20); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GPS_STATUS, buf, MAVLINK_MSG_ID_GPS_STATUS_LEN, MAVLINK_MSG_ID_GPS_STATUS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GPS_STATUS, buf, MAVLINK_MSG_ID_GPS_STATUS_LEN); +#endif +#else + mavlink_gps_status_t *packet = (mavlink_gps_status_t *)msgbuf; + packet->satellites_visible = satellites_visible; + mav_array_memcpy(packet->satellite_prn, satellite_prn, sizeof(uint8_t)*20); + mav_array_memcpy(packet->satellite_used, satellite_used, sizeof(uint8_t)*20); + mav_array_memcpy(packet->satellite_elevation, satellite_elevation, sizeof(uint8_t)*20); + mav_array_memcpy(packet->satellite_azimuth, satellite_azimuth, sizeof(uint8_t)*20); + mav_array_memcpy(packet->satellite_snr, satellite_snr, sizeof(uint8_t)*20); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GPS_STATUS, (const char *)packet, MAVLINK_MSG_ID_GPS_STATUS_LEN, MAVLINK_MSG_ID_GPS_STATUS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_GPS_STATUS, (const char *)packet, MAVLINK_MSG_ID_GPS_STATUS_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE GPS_STATUS UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_heartbeat.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_heartbeat.h index 826138fad..902e381ca 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_heartbeat.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_heartbeat.h @@ -198,6 +198,48 @@ static inline void mavlink_msg_heartbeat_send(mavlink_channel_t chan, uint8_t ty #endif } +#if MAVLINK_MSG_ID_HEARTBEAT_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_heartbeat_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t type, uint8_t autopilot, uint8_t base_mode, uint32_t custom_mode, uint8_t system_status) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, custom_mode); + _mav_put_uint8_t(buf, 4, type); + _mav_put_uint8_t(buf, 5, autopilot); + _mav_put_uint8_t(buf, 6, base_mode); + _mav_put_uint8_t(buf, 7, system_status); + _mav_put_uint8_t(buf, 8, 3); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HEARTBEAT, buf, MAVLINK_MSG_ID_HEARTBEAT_LEN, MAVLINK_MSG_ID_HEARTBEAT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HEARTBEAT, buf, MAVLINK_MSG_ID_HEARTBEAT_LEN); +#endif +#else + mavlink_heartbeat_t *packet = (mavlink_heartbeat_t *)msgbuf; + packet->custom_mode = custom_mode; + packet->type = type; + packet->autopilot = autopilot; + packet->base_mode = base_mode; + packet->system_status = system_status; + packet->mavlink_version = 3; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HEARTBEAT, (const char *)packet, MAVLINK_MSG_ID_HEARTBEAT_LEN, MAVLINK_MSG_ID_HEARTBEAT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HEARTBEAT, (const char *)packet, MAVLINK_MSG_ID_HEARTBEAT_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE HEARTBEAT UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_highres_imu.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_highres_imu.h index 0dcd95ed3..2749cb097 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_highres_imu.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_highres_imu.h @@ -300,6 +300,66 @@ static inline void mavlink_msg_highres_imu_send(mavlink_channel_t chan, uint64_t #endif } +#if MAVLINK_MSG_ID_HIGHRES_IMU_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_highres_imu_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint64_t time_usec, float xacc, float yacc, float zacc, float xgyro, float ygyro, float zgyro, float xmag, float ymag, float zmag, float abs_pressure, float diff_pressure, float pressure_alt, float temperature, uint16_t fields_updated) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint64_t(buf, 0, time_usec); + _mav_put_float(buf, 8, xacc); + _mav_put_float(buf, 12, yacc); + _mav_put_float(buf, 16, zacc); + _mav_put_float(buf, 20, xgyro); + _mav_put_float(buf, 24, ygyro); + _mav_put_float(buf, 28, zgyro); + _mav_put_float(buf, 32, xmag); + _mav_put_float(buf, 36, ymag); + _mav_put_float(buf, 40, zmag); + _mav_put_float(buf, 44, abs_pressure); + _mav_put_float(buf, 48, diff_pressure); + _mav_put_float(buf, 52, pressure_alt); + _mav_put_float(buf, 56, temperature); + _mav_put_uint16_t(buf, 60, fields_updated); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIGHRES_IMU, buf, MAVLINK_MSG_ID_HIGHRES_IMU_LEN, MAVLINK_MSG_ID_HIGHRES_IMU_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIGHRES_IMU, buf, MAVLINK_MSG_ID_HIGHRES_IMU_LEN); +#endif +#else + mavlink_highres_imu_t *packet = (mavlink_highres_imu_t *)msgbuf; + packet->time_usec = time_usec; + packet->xacc = xacc; + packet->yacc = yacc; + packet->zacc = zacc; + packet->xgyro = xgyro; + packet->ygyro = ygyro; + packet->zgyro = zgyro; + packet->xmag = xmag; + packet->ymag = ymag; + packet->zmag = zmag; + packet->abs_pressure = abs_pressure; + packet->diff_pressure = diff_pressure; + packet->pressure_alt = pressure_alt; + packet->temperature = temperature; + packet->fields_updated = fields_updated; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIGHRES_IMU, (const char *)packet, MAVLINK_MSG_ID_HIGHRES_IMU_LEN, MAVLINK_MSG_ID_HIGHRES_IMU_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIGHRES_IMU, (const char *)packet, MAVLINK_MSG_ID_HIGHRES_IMU_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE HIGHRES_IMU UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_hil_controls.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_hil_controls.h index aed5108d0..f7507b1cf 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_hil_controls.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_hil_controls.h @@ -256,6 +256,58 @@ static inline void mavlink_msg_hil_controls_send(mavlink_channel_t chan, uint64_ #endif } +#if MAVLINK_MSG_ID_HIL_CONTROLS_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_hil_controls_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint64_t time_usec, float roll_ailerons, float pitch_elevator, float yaw_rudder, float throttle, float aux1, float aux2, float aux3, float aux4, uint8_t mode, uint8_t nav_mode) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint64_t(buf, 0, time_usec); + _mav_put_float(buf, 8, roll_ailerons); + _mav_put_float(buf, 12, pitch_elevator); + _mav_put_float(buf, 16, yaw_rudder); + _mav_put_float(buf, 20, throttle); + _mav_put_float(buf, 24, aux1); + _mav_put_float(buf, 28, aux2); + _mav_put_float(buf, 32, aux3); + _mav_put_float(buf, 36, aux4); + _mav_put_uint8_t(buf, 40, mode); + _mav_put_uint8_t(buf, 41, nav_mode); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIL_CONTROLS, buf, MAVLINK_MSG_ID_HIL_CONTROLS_LEN, MAVLINK_MSG_ID_HIL_CONTROLS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIL_CONTROLS, buf, MAVLINK_MSG_ID_HIL_CONTROLS_LEN); +#endif +#else + mavlink_hil_controls_t *packet = (mavlink_hil_controls_t *)msgbuf; + packet->time_usec = time_usec; + packet->roll_ailerons = roll_ailerons; + packet->pitch_elevator = pitch_elevator; + packet->yaw_rudder = yaw_rudder; + packet->throttle = throttle; + packet->aux1 = aux1; + packet->aux2 = aux2; + packet->aux3 = aux3; + packet->aux4 = aux4; + packet->mode = mode; + packet->nav_mode = nav_mode; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIL_CONTROLS, (const char *)packet, MAVLINK_MSG_ID_HIL_CONTROLS_LEN, MAVLINK_MSG_ID_HIL_CONTROLS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIL_CONTROLS, (const char *)packet, MAVLINK_MSG_ID_HIL_CONTROLS_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE HIL_CONTROLS UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_hil_gps.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_hil_gps.h index 91aec5b08..a22c0472f 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_hil_gps.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_hil_gps.h @@ -278,6 +278,62 @@ static inline void mavlink_msg_hil_gps_send(mavlink_channel_t chan, uint64_t tim #endif } +#if MAVLINK_MSG_ID_HIL_GPS_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_hil_gps_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint64_t time_usec, uint8_t fix_type, int32_t lat, int32_t lon, int32_t alt, uint16_t eph, uint16_t epv, uint16_t vel, int16_t vn, int16_t ve, int16_t vd, uint16_t cog, uint8_t satellites_visible) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint64_t(buf, 0, time_usec); + _mav_put_int32_t(buf, 8, lat); + _mav_put_int32_t(buf, 12, lon); + _mav_put_int32_t(buf, 16, alt); + _mav_put_uint16_t(buf, 20, eph); + _mav_put_uint16_t(buf, 22, epv); + _mav_put_uint16_t(buf, 24, vel); + _mav_put_int16_t(buf, 26, vn); + _mav_put_int16_t(buf, 28, ve); + _mav_put_int16_t(buf, 30, vd); + _mav_put_uint16_t(buf, 32, cog); + _mav_put_uint8_t(buf, 34, fix_type); + _mav_put_uint8_t(buf, 35, satellites_visible); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIL_GPS, buf, MAVLINK_MSG_ID_HIL_GPS_LEN, MAVLINK_MSG_ID_HIL_GPS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIL_GPS, buf, MAVLINK_MSG_ID_HIL_GPS_LEN); +#endif +#else + mavlink_hil_gps_t *packet = (mavlink_hil_gps_t *)msgbuf; + packet->time_usec = time_usec; + packet->lat = lat; + packet->lon = lon; + packet->alt = alt; + packet->eph = eph; + packet->epv = epv; + packet->vel = vel; + packet->vn = vn; + packet->ve = ve; + packet->vd = vd; + packet->cog = cog; + packet->fix_type = fix_type; + packet->satellites_visible = satellites_visible; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIL_GPS, (const char *)packet, MAVLINK_MSG_ID_HIL_GPS_LEN, MAVLINK_MSG_ID_HIL_GPS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIL_GPS, (const char *)packet, MAVLINK_MSG_ID_HIL_GPS_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE HIL_GPS UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_hil_optical_flow.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_hil_optical_flow.h index acb1392e1..eaadf2435 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_hil_optical_flow.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_hil_optical_flow.h @@ -223,6 +223,52 @@ static inline void mavlink_msg_hil_optical_flow_send(mavlink_channel_t chan, uin #endif } +#if MAVLINK_MSG_ID_HIL_OPTICAL_FLOW_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_hil_optical_flow_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint64_t time_usec, uint8_t sensor_id, int16_t flow_x, int16_t flow_y, float flow_comp_m_x, float flow_comp_m_y, uint8_t quality, float ground_distance) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint64_t(buf, 0, time_usec); + _mav_put_float(buf, 8, flow_comp_m_x); + _mav_put_float(buf, 12, flow_comp_m_y); + _mav_put_float(buf, 16, ground_distance); + _mav_put_int16_t(buf, 20, flow_x); + _mav_put_int16_t(buf, 22, flow_y); + _mav_put_uint8_t(buf, 24, sensor_id); + _mav_put_uint8_t(buf, 25, quality); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIL_OPTICAL_FLOW, buf, MAVLINK_MSG_ID_HIL_OPTICAL_FLOW_LEN, MAVLINK_MSG_ID_HIL_OPTICAL_FLOW_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIL_OPTICAL_FLOW, buf, MAVLINK_MSG_ID_HIL_OPTICAL_FLOW_LEN); +#endif +#else + mavlink_hil_optical_flow_t *packet = (mavlink_hil_optical_flow_t *)msgbuf; + packet->time_usec = time_usec; + packet->flow_comp_m_x = flow_comp_m_x; + packet->flow_comp_m_y = flow_comp_m_y; + packet->ground_distance = ground_distance; + packet->flow_x = flow_x; + packet->flow_y = flow_y; + packet->sensor_id = sensor_id; + packet->quality = quality; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIL_OPTICAL_FLOW, (const char *)packet, MAVLINK_MSG_ID_HIL_OPTICAL_FLOW_LEN, MAVLINK_MSG_ID_HIL_OPTICAL_FLOW_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIL_OPTICAL_FLOW, (const char *)packet, MAVLINK_MSG_ID_HIL_OPTICAL_FLOW_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE HIL_OPTICAL_FLOW UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_hil_rc_inputs_raw.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_hil_rc_inputs_raw.h index a42bde50b..227cd9d94 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_hil_rc_inputs_raw.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_hil_rc_inputs_raw.h @@ -289,6 +289,64 @@ static inline void mavlink_msg_hil_rc_inputs_raw_send(mavlink_channel_t chan, ui #endif } +#if MAVLINK_MSG_ID_HIL_RC_INPUTS_RAW_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_hil_rc_inputs_raw_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint64_t time_usec, uint16_t chan1_raw, uint16_t chan2_raw, uint16_t chan3_raw, uint16_t chan4_raw, uint16_t chan5_raw, uint16_t chan6_raw, uint16_t chan7_raw, uint16_t chan8_raw, uint16_t chan9_raw, uint16_t chan10_raw, uint16_t chan11_raw, uint16_t chan12_raw, uint8_t rssi) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint64_t(buf, 0, time_usec); + _mav_put_uint16_t(buf, 8, chan1_raw); + _mav_put_uint16_t(buf, 10, chan2_raw); + _mav_put_uint16_t(buf, 12, chan3_raw); + _mav_put_uint16_t(buf, 14, chan4_raw); + _mav_put_uint16_t(buf, 16, chan5_raw); + _mav_put_uint16_t(buf, 18, chan6_raw); + _mav_put_uint16_t(buf, 20, chan7_raw); + _mav_put_uint16_t(buf, 22, chan8_raw); + _mav_put_uint16_t(buf, 24, chan9_raw); + _mav_put_uint16_t(buf, 26, chan10_raw); + _mav_put_uint16_t(buf, 28, chan11_raw); + _mav_put_uint16_t(buf, 30, chan12_raw); + _mav_put_uint8_t(buf, 32, rssi); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIL_RC_INPUTS_RAW, buf, MAVLINK_MSG_ID_HIL_RC_INPUTS_RAW_LEN, MAVLINK_MSG_ID_HIL_RC_INPUTS_RAW_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIL_RC_INPUTS_RAW, buf, MAVLINK_MSG_ID_HIL_RC_INPUTS_RAW_LEN); +#endif +#else + mavlink_hil_rc_inputs_raw_t *packet = (mavlink_hil_rc_inputs_raw_t *)msgbuf; + packet->time_usec = time_usec; + packet->chan1_raw = chan1_raw; + packet->chan2_raw = chan2_raw; + packet->chan3_raw = chan3_raw; + packet->chan4_raw = chan4_raw; + packet->chan5_raw = chan5_raw; + packet->chan6_raw = chan6_raw; + packet->chan7_raw = chan7_raw; + packet->chan8_raw = chan8_raw; + packet->chan9_raw = chan9_raw; + packet->chan10_raw = chan10_raw; + packet->chan11_raw = chan11_raw; + packet->chan12_raw = chan12_raw; + packet->rssi = rssi; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIL_RC_INPUTS_RAW, (const char *)packet, MAVLINK_MSG_ID_HIL_RC_INPUTS_RAW_LEN, MAVLINK_MSG_ID_HIL_RC_INPUTS_RAW_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIL_RC_INPUTS_RAW, (const char *)packet, MAVLINK_MSG_ID_HIL_RC_INPUTS_RAW_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE HIL_RC_INPUTS_RAW UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_hil_sensor.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_hil_sensor.h index 6c2667473..8672f8b8a 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_hil_sensor.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_hil_sensor.h @@ -300,6 +300,66 @@ static inline void mavlink_msg_hil_sensor_send(mavlink_channel_t chan, uint64_t #endif } +#if MAVLINK_MSG_ID_HIL_SENSOR_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_hil_sensor_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint64_t time_usec, float xacc, float yacc, float zacc, float xgyro, float ygyro, float zgyro, float xmag, float ymag, float zmag, float abs_pressure, float diff_pressure, float pressure_alt, float temperature, uint32_t fields_updated) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint64_t(buf, 0, time_usec); + _mav_put_float(buf, 8, xacc); + _mav_put_float(buf, 12, yacc); + _mav_put_float(buf, 16, zacc); + _mav_put_float(buf, 20, xgyro); + _mav_put_float(buf, 24, ygyro); + _mav_put_float(buf, 28, zgyro); + _mav_put_float(buf, 32, xmag); + _mav_put_float(buf, 36, ymag); + _mav_put_float(buf, 40, zmag); + _mav_put_float(buf, 44, abs_pressure); + _mav_put_float(buf, 48, diff_pressure); + _mav_put_float(buf, 52, pressure_alt); + _mav_put_float(buf, 56, temperature); + _mav_put_uint32_t(buf, 60, fields_updated); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIL_SENSOR, buf, MAVLINK_MSG_ID_HIL_SENSOR_LEN, MAVLINK_MSG_ID_HIL_SENSOR_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIL_SENSOR, buf, MAVLINK_MSG_ID_HIL_SENSOR_LEN); +#endif +#else + mavlink_hil_sensor_t *packet = (mavlink_hil_sensor_t *)msgbuf; + packet->time_usec = time_usec; + packet->xacc = xacc; + packet->yacc = yacc; + packet->zacc = zacc; + packet->xgyro = xgyro; + packet->ygyro = ygyro; + packet->zgyro = zgyro; + packet->xmag = xmag; + packet->ymag = ymag; + packet->zmag = zmag; + packet->abs_pressure = abs_pressure; + packet->diff_pressure = diff_pressure; + packet->pressure_alt = pressure_alt; + packet->temperature = temperature; + packet->fields_updated = fields_updated; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIL_SENSOR, (const char *)packet, MAVLINK_MSG_ID_HIL_SENSOR_LEN, MAVLINK_MSG_ID_HIL_SENSOR_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIL_SENSOR, (const char *)packet, MAVLINK_MSG_ID_HIL_SENSOR_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE HIL_SENSOR UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_hil_state.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_hil_state.h index bcc857767..923ed60b9 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_hil_state.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_hil_state.h @@ -311,6 +311,68 @@ static inline void mavlink_msg_hil_state_send(mavlink_channel_t chan, uint64_t t #endif } +#if MAVLINK_MSG_ID_HIL_STATE_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_hil_state_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint64_t time_usec, float roll, float pitch, float yaw, float rollspeed, float pitchspeed, float yawspeed, int32_t lat, int32_t lon, int32_t alt, int16_t vx, int16_t vy, int16_t vz, int16_t xacc, int16_t yacc, int16_t zacc) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint64_t(buf, 0, time_usec); + _mav_put_float(buf, 8, roll); + _mav_put_float(buf, 12, pitch); + _mav_put_float(buf, 16, yaw); + _mav_put_float(buf, 20, rollspeed); + _mav_put_float(buf, 24, pitchspeed); + _mav_put_float(buf, 28, yawspeed); + _mav_put_int32_t(buf, 32, lat); + _mav_put_int32_t(buf, 36, lon); + _mav_put_int32_t(buf, 40, alt); + _mav_put_int16_t(buf, 44, vx); + _mav_put_int16_t(buf, 46, vy); + _mav_put_int16_t(buf, 48, vz); + _mav_put_int16_t(buf, 50, xacc); + _mav_put_int16_t(buf, 52, yacc); + _mav_put_int16_t(buf, 54, zacc); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIL_STATE, buf, MAVLINK_MSG_ID_HIL_STATE_LEN, MAVLINK_MSG_ID_HIL_STATE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIL_STATE, buf, MAVLINK_MSG_ID_HIL_STATE_LEN); +#endif +#else + mavlink_hil_state_t *packet = (mavlink_hil_state_t *)msgbuf; + packet->time_usec = time_usec; + packet->roll = roll; + packet->pitch = pitch; + packet->yaw = yaw; + packet->rollspeed = rollspeed; + packet->pitchspeed = pitchspeed; + packet->yawspeed = yawspeed; + packet->lat = lat; + packet->lon = lon; + packet->alt = alt; + packet->vx = vx; + packet->vy = vy; + packet->vz = vz; + packet->xacc = xacc; + packet->yacc = yacc; + packet->zacc = zacc; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIL_STATE, (const char *)packet, MAVLINK_MSG_ID_HIL_STATE_LEN, MAVLINK_MSG_ID_HIL_STATE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIL_STATE, (const char *)packet, MAVLINK_MSG_ID_HIL_STATE_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE HIL_STATE UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_hil_state_quaternion.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_hil_state_quaternion.h index 732176193..1a028bdf9 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_hil_state_quaternion.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_hil_state_quaternion.h @@ -305,6 +305,66 @@ static inline void mavlink_msg_hil_state_quaternion_send(mavlink_channel_t chan, #endif } +#if MAVLINK_MSG_ID_HIL_STATE_QUATERNION_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_hil_state_quaternion_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint64_t time_usec, const float *attitude_quaternion, float rollspeed, float pitchspeed, float yawspeed, int32_t lat, int32_t lon, int32_t alt, int16_t vx, int16_t vy, int16_t vz, uint16_t ind_airspeed, uint16_t true_airspeed, int16_t xacc, int16_t yacc, int16_t zacc) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint64_t(buf, 0, time_usec); + _mav_put_float(buf, 24, rollspeed); + _mav_put_float(buf, 28, pitchspeed); + _mav_put_float(buf, 32, yawspeed); + _mav_put_int32_t(buf, 36, lat); + _mav_put_int32_t(buf, 40, lon); + _mav_put_int32_t(buf, 44, alt); + _mav_put_int16_t(buf, 48, vx); + _mav_put_int16_t(buf, 50, vy); + _mav_put_int16_t(buf, 52, vz); + _mav_put_uint16_t(buf, 54, ind_airspeed); + _mav_put_uint16_t(buf, 56, true_airspeed); + _mav_put_int16_t(buf, 58, xacc); + _mav_put_int16_t(buf, 60, yacc); + _mav_put_int16_t(buf, 62, zacc); + _mav_put_float_array(buf, 8, attitude_quaternion, 4); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIL_STATE_QUATERNION, buf, MAVLINK_MSG_ID_HIL_STATE_QUATERNION_LEN, MAVLINK_MSG_ID_HIL_STATE_QUATERNION_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIL_STATE_QUATERNION, buf, MAVLINK_MSG_ID_HIL_STATE_QUATERNION_LEN); +#endif +#else + mavlink_hil_state_quaternion_t *packet = (mavlink_hil_state_quaternion_t *)msgbuf; + packet->time_usec = time_usec; + packet->rollspeed = rollspeed; + packet->pitchspeed = pitchspeed; + packet->yawspeed = yawspeed; + packet->lat = lat; + packet->lon = lon; + packet->alt = alt; + packet->vx = vx; + packet->vy = vy; + packet->vz = vz; + packet->ind_airspeed = ind_airspeed; + packet->true_airspeed = true_airspeed; + packet->xacc = xacc; + packet->yacc = yacc; + packet->zacc = zacc; + mav_array_memcpy(packet->attitude_quaternion, attitude_quaternion, sizeof(float)*4); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIL_STATE_QUATERNION, (const char *)packet, MAVLINK_MSG_ID_HIL_STATE_QUATERNION_LEN, MAVLINK_MSG_ID_HIL_STATE_QUATERNION_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_HIL_STATE_QUATERNION, (const char *)packet, MAVLINK_MSG_ID_HIL_STATE_QUATERNION_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE HIL_STATE_QUATERNION UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_local_position_ned.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_local_position_ned.h index a0b72c0e1..e18a94869 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_local_position_ned.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_local_position_ned.h @@ -212,6 +212,50 @@ static inline void mavlink_msg_local_position_ned_send(mavlink_channel_t chan, u #endif } +#if MAVLINK_MSG_ID_LOCAL_POSITION_NED_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_local_position_ned_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint32_t time_boot_ms, float x, float y, float z, float vx, float vy, float vz) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, time_boot_ms); + _mav_put_float(buf, 4, x); + _mav_put_float(buf, 8, y); + _mav_put_float(buf, 12, z); + _mav_put_float(buf, 16, vx); + _mav_put_float(buf, 20, vy); + _mav_put_float(buf, 24, vz); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOCAL_POSITION_NED, buf, MAVLINK_MSG_ID_LOCAL_POSITION_NED_LEN, MAVLINK_MSG_ID_LOCAL_POSITION_NED_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOCAL_POSITION_NED, buf, MAVLINK_MSG_ID_LOCAL_POSITION_NED_LEN); +#endif +#else + mavlink_local_position_ned_t *packet = (mavlink_local_position_ned_t *)msgbuf; + packet->time_boot_ms = time_boot_ms; + packet->x = x; + packet->y = y; + packet->z = z; + packet->vx = vx; + packet->vy = vy; + packet->vz = vz; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOCAL_POSITION_NED, (const char *)packet, MAVLINK_MSG_ID_LOCAL_POSITION_NED_LEN, MAVLINK_MSG_ID_LOCAL_POSITION_NED_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOCAL_POSITION_NED, (const char *)packet, MAVLINK_MSG_ID_LOCAL_POSITION_NED_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE LOCAL_POSITION_NED UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_local_position_ned_system_global_offset.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_local_position_ned_system_global_offset.h index 8c4686202..af7d195b0 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_local_position_ned_system_global_offset.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_local_position_ned_system_global_offset.h @@ -212,6 +212,50 @@ static inline void mavlink_msg_local_position_ned_system_global_offset_send(mavl #endif } +#if MAVLINK_MSG_ID_LOCAL_POSITION_NED_SYSTEM_GLOBAL_OFFSET_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_local_position_ned_system_global_offset_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint32_t time_boot_ms, float x, float y, float z, float roll, float pitch, float yaw) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, time_boot_ms); + _mav_put_float(buf, 4, x); + _mav_put_float(buf, 8, y); + _mav_put_float(buf, 12, z); + _mav_put_float(buf, 16, roll); + _mav_put_float(buf, 20, pitch); + _mav_put_float(buf, 24, yaw); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOCAL_POSITION_NED_SYSTEM_GLOBAL_OFFSET, buf, MAVLINK_MSG_ID_LOCAL_POSITION_NED_SYSTEM_GLOBAL_OFFSET_LEN, MAVLINK_MSG_ID_LOCAL_POSITION_NED_SYSTEM_GLOBAL_OFFSET_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOCAL_POSITION_NED_SYSTEM_GLOBAL_OFFSET, buf, MAVLINK_MSG_ID_LOCAL_POSITION_NED_SYSTEM_GLOBAL_OFFSET_LEN); +#endif +#else + mavlink_local_position_ned_system_global_offset_t *packet = (mavlink_local_position_ned_system_global_offset_t *)msgbuf; + packet->time_boot_ms = time_boot_ms; + packet->x = x; + packet->y = y; + packet->z = z; + packet->roll = roll; + packet->pitch = pitch; + packet->yaw = yaw; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOCAL_POSITION_NED_SYSTEM_GLOBAL_OFFSET, (const char *)packet, MAVLINK_MSG_ID_LOCAL_POSITION_NED_SYSTEM_GLOBAL_OFFSET_LEN, MAVLINK_MSG_ID_LOCAL_POSITION_NED_SYSTEM_GLOBAL_OFFSET_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOCAL_POSITION_NED_SYSTEM_GLOBAL_OFFSET, (const char *)packet, MAVLINK_MSG_ID_LOCAL_POSITION_NED_SYSTEM_GLOBAL_OFFSET_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE LOCAL_POSITION_NED_SYSTEM_GLOBAL_OFFSET UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_local_position_setpoint.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_local_position_setpoint.h index 1794815f8..8dae721be 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_local_position_setpoint.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_local_position_setpoint.h @@ -190,6 +190,46 @@ static inline void mavlink_msg_local_position_setpoint_send(mavlink_channel_t ch #endif } +#if MAVLINK_MSG_ID_LOCAL_POSITION_SETPOINT_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_local_position_setpoint_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t coordinate_frame, float x, float y, float z, float yaw) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, x); + _mav_put_float(buf, 4, y); + _mav_put_float(buf, 8, z); + _mav_put_float(buf, 12, yaw); + _mav_put_uint8_t(buf, 16, coordinate_frame); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOCAL_POSITION_SETPOINT, buf, MAVLINK_MSG_ID_LOCAL_POSITION_SETPOINT_LEN, MAVLINK_MSG_ID_LOCAL_POSITION_SETPOINT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOCAL_POSITION_SETPOINT, buf, MAVLINK_MSG_ID_LOCAL_POSITION_SETPOINT_LEN); +#endif +#else + mavlink_local_position_setpoint_t *packet = (mavlink_local_position_setpoint_t *)msgbuf; + packet->x = x; + packet->y = y; + packet->z = z; + packet->yaw = yaw; + packet->coordinate_frame = coordinate_frame; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOCAL_POSITION_SETPOINT, (const char *)packet, MAVLINK_MSG_ID_LOCAL_POSITION_SETPOINT_LEN, MAVLINK_MSG_ID_LOCAL_POSITION_SETPOINT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOCAL_POSITION_SETPOINT, (const char *)packet, MAVLINK_MSG_ID_LOCAL_POSITION_SETPOINT_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE LOCAL_POSITION_SETPOINT UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_log_data.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_log_data.h index 1cf5d15e4..48641f3eb 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_log_data.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_log_data.h @@ -173,6 +173,42 @@ static inline void mavlink_msg_log_data_send(mavlink_channel_t chan, uint16_t id #endif } +#if MAVLINK_MSG_ID_LOG_DATA_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_log_data_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint16_t id, uint32_t ofs, uint8_t count, const uint8_t *data) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, ofs); + _mav_put_uint16_t(buf, 4, id); + _mav_put_uint8_t(buf, 6, count); + _mav_put_uint8_t_array(buf, 7, data, 90); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOG_DATA, buf, MAVLINK_MSG_ID_LOG_DATA_LEN, MAVLINK_MSG_ID_LOG_DATA_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOG_DATA, buf, MAVLINK_MSG_ID_LOG_DATA_LEN); +#endif +#else + mavlink_log_data_t *packet = (mavlink_log_data_t *)msgbuf; + packet->ofs = ofs; + packet->id = id; + packet->count = count; + mav_array_memcpy(packet->data, data, sizeof(uint8_t)*90); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOG_DATA, (const char *)packet, MAVLINK_MSG_ID_LOG_DATA_LEN, MAVLINK_MSG_ID_LOG_DATA_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOG_DATA, (const char *)packet, MAVLINK_MSG_ID_LOG_DATA_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE LOG_DATA UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_log_entry.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_log_entry.h index 681d8f07c..8ecaec3ae 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_log_entry.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_log_entry.h @@ -190,6 +190,46 @@ static inline void mavlink_msg_log_entry_send(mavlink_channel_t chan, uint16_t i #endif } +#if MAVLINK_MSG_ID_LOG_ENTRY_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_log_entry_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint16_t id, uint16_t num_logs, uint16_t last_log_num, uint32_t time_utc, uint32_t size) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, time_utc); + _mav_put_uint32_t(buf, 4, size); + _mav_put_uint16_t(buf, 8, id); + _mav_put_uint16_t(buf, 10, num_logs); + _mav_put_uint16_t(buf, 12, last_log_num); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOG_ENTRY, buf, MAVLINK_MSG_ID_LOG_ENTRY_LEN, MAVLINK_MSG_ID_LOG_ENTRY_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOG_ENTRY, buf, MAVLINK_MSG_ID_LOG_ENTRY_LEN); +#endif +#else + mavlink_log_entry_t *packet = (mavlink_log_entry_t *)msgbuf; + packet->time_utc = time_utc; + packet->size = size; + packet->id = id; + packet->num_logs = num_logs; + packet->last_log_num = last_log_num; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOG_ENTRY, (const char *)packet, MAVLINK_MSG_ID_LOG_ENTRY_LEN, MAVLINK_MSG_ID_LOG_ENTRY_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOG_ENTRY, (const char *)packet, MAVLINK_MSG_ID_LOG_ENTRY_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE LOG_ENTRY UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_log_erase.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_log_erase.h index feafeaf16..957c4d4cc 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_log_erase.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_log_erase.h @@ -157,6 +157,40 @@ static inline void mavlink_msg_log_erase_send(mavlink_channel_t chan, uint8_t ta #endif } +#if MAVLINK_MSG_ID_LOG_ERASE_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_log_erase_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint8_t(buf, 0, target_system); + _mav_put_uint8_t(buf, 1, target_component); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOG_ERASE, buf, MAVLINK_MSG_ID_LOG_ERASE_LEN, MAVLINK_MSG_ID_LOG_ERASE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOG_ERASE, buf, MAVLINK_MSG_ID_LOG_ERASE_LEN); +#endif +#else + mavlink_log_erase_t *packet = (mavlink_log_erase_t *)msgbuf; + packet->target_system = target_system; + packet->target_component = target_component; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOG_ERASE, (const char *)packet, MAVLINK_MSG_ID_LOG_ERASE_LEN, MAVLINK_MSG_ID_LOG_ERASE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOG_ERASE, (const char *)packet, MAVLINK_MSG_ID_LOG_ERASE_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE LOG_ERASE UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_log_request_data.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_log_request_data.h index 5be9eea47..ef5cbb67c 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_log_request_data.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_log_request_data.h @@ -190,6 +190,46 @@ static inline void mavlink_msg_log_request_data_send(mavlink_channel_t chan, uin #endif } +#if MAVLINK_MSG_ID_LOG_REQUEST_DATA_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_log_request_data_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, uint16_t id, uint32_t ofs, uint32_t count) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, ofs); + _mav_put_uint32_t(buf, 4, count); + _mav_put_uint16_t(buf, 8, id); + _mav_put_uint8_t(buf, 10, target_system); + _mav_put_uint8_t(buf, 11, target_component); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOG_REQUEST_DATA, buf, MAVLINK_MSG_ID_LOG_REQUEST_DATA_LEN, MAVLINK_MSG_ID_LOG_REQUEST_DATA_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOG_REQUEST_DATA, buf, MAVLINK_MSG_ID_LOG_REQUEST_DATA_LEN); +#endif +#else + mavlink_log_request_data_t *packet = (mavlink_log_request_data_t *)msgbuf; + packet->ofs = ofs; + packet->count = count; + packet->id = id; + packet->target_system = target_system; + packet->target_component = target_component; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOG_REQUEST_DATA, (const char *)packet, MAVLINK_MSG_ID_LOG_REQUEST_DATA_LEN, MAVLINK_MSG_ID_LOG_REQUEST_DATA_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOG_REQUEST_DATA, (const char *)packet, MAVLINK_MSG_ID_LOG_REQUEST_DATA_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE LOG_REQUEST_DATA UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_log_request_end.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_log_request_end.h index 48a5a03b4..23fcca29f 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_log_request_end.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_log_request_end.h @@ -157,6 +157,40 @@ static inline void mavlink_msg_log_request_end_send(mavlink_channel_t chan, uint #endif } +#if MAVLINK_MSG_ID_LOG_REQUEST_END_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_log_request_end_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint8_t(buf, 0, target_system); + _mav_put_uint8_t(buf, 1, target_component); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOG_REQUEST_END, buf, MAVLINK_MSG_ID_LOG_REQUEST_END_LEN, MAVLINK_MSG_ID_LOG_REQUEST_END_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOG_REQUEST_END, buf, MAVLINK_MSG_ID_LOG_REQUEST_END_LEN); +#endif +#else + mavlink_log_request_end_t *packet = (mavlink_log_request_end_t *)msgbuf; + packet->target_system = target_system; + packet->target_component = target_component; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOG_REQUEST_END, (const char *)packet, MAVLINK_MSG_ID_LOG_REQUEST_END_LEN, MAVLINK_MSG_ID_LOG_REQUEST_END_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOG_REQUEST_END, (const char *)packet, MAVLINK_MSG_ID_LOG_REQUEST_END_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE LOG_REQUEST_END UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_log_request_list.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_log_request_list.h index 7a5b25c17..e511b5312 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_log_request_list.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_log_request_list.h @@ -179,6 +179,44 @@ static inline void mavlink_msg_log_request_list_send(mavlink_channel_t chan, uin #endif } +#if MAVLINK_MSG_ID_LOG_REQUEST_LIST_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_log_request_list_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, uint16_t start, uint16_t end) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint16_t(buf, 0, start); + _mav_put_uint16_t(buf, 2, end); + _mav_put_uint8_t(buf, 4, target_system); + _mav_put_uint8_t(buf, 5, target_component); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOG_REQUEST_LIST, buf, MAVLINK_MSG_ID_LOG_REQUEST_LIST_LEN, MAVLINK_MSG_ID_LOG_REQUEST_LIST_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOG_REQUEST_LIST, buf, MAVLINK_MSG_ID_LOG_REQUEST_LIST_LEN); +#endif +#else + mavlink_log_request_list_t *packet = (mavlink_log_request_list_t *)msgbuf; + packet->start = start; + packet->end = end; + packet->target_system = target_system; + packet->target_component = target_component; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOG_REQUEST_LIST, (const char *)packet, MAVLINK_MSG_ID_LOG_REQUEST_LIST_LEN, MAVLINK_MSG_ID_LOG_REQUEST_LIST_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOG_REQUEST_LIST, (const char *)packet, MAVLINK_MSG_ID_LOG_REQUEST_LIST_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE LOG_REQUEST_LIST UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_manual_control.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_manual_control.h index 6b6e9e148..e93b759d0 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_manual_control.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_manual_control.h @@ -201,6 +201,48 @@ static inline void mavlink_msg_manual_control_send(mavlink_channel_t chan, uint8 #endif } +#if MAVLINK_MSG_ID_MANUAL_CONTROL_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_manual_control_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target, int16_t x, int16_t y, int16_t z, int16_t r, uint16_t buttons) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_int16_t(buf, 0, x); + _mav_put_int16_t(buf, 2, y); + _mav_put_int16_t(buf, 4, z); + _mav_put_int16_t(buf, 6, r); + _mav_put_uint16_t(buf, 8, buttons); + _mav_put_uint8_t(buf, 10, target); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MANUAL_CONTROL, buf, MAVLINK_MSG_ID_MANUAL_CONTROL_LEN, MAVLINK_MSG_ID_MANUAL_CONTROL_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MANUAL_CONTROL, buf, MAVLINK_MSG_ID_MANUAL_CONTROL_LEN); +#endif +#else + mavlink_manual_control_t *packet = (mavlink_manual_control_t *)msgbuf; + packet->x = x; + packet->y = y; + packet->z = z; + packet->r = r; + packet->buttons = buttons; + packet->target = target; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MANUAL_CONTROL, (const char *)packet, MAVLINK_MSG_ID_MANUAL_CONTROL_LEN, MAVLINK_MSG_ID_MANUAL_CONTROL_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MANUAL_CONTROL, (const char *)packet, MAVLINK_MSG_ID_MANUAL_CONTROL_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE MANUAL_CONTROL UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_manual_setpoint.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_manual_setpoint.h index a694947c1..b27626726 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_manual_setpoint.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_manual_setpoint.h @@ -212,6 +212,50 @@ static inline void mavlink_msg_manual_setpoint_send(mavlink_channel_t chan, uint #endif } +#if MAVLINK_MSG_ID_MANUAL_SETPOINT_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_manual_setpoint_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint32_t time_boot_ms, float roll, float pitch, float yaw, float thrust, uint8_t mode_switch, uint8_t manual_override_switch) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, time_boot_ms); + _mav_put_float(buf, 4, roll); + _mav_put_float(buf, 8, pitch); + _mav_put_float(buf, 12, yaw); + _mav_put_float(buf, 16, thrust); + _mav_put_uint8_t(buf, 20, mode_switch); + _mav_put_uint8_t(buf, 21, manual_override_switch); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MANUAL_SETPOINT, buf, MAVLINK_MSG_ID_MANUAL_SETPOINT_LEN, MAVLINK_MSG_ID_MANUAL_SETPOINT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MANUAL_SETPOINT, buf, MAVLINK_MSG_ID_MANUAL_SETPOINT_LEN); +#endif +#else + mavlink_manual_setpoint_t *packet = (mavlink_manual_setpoint_t *)msgbuf; + packet->time_boot_ms = time_boot_ms; + packet->roll = roll; + packet->pitch = pitch; + packet->yaw = yaw; + packet->thrust = thrust; + packet->mode_switch = mode_switch; + packet->manual_override_switch = manual_override_switch; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MANUAL_SETPOINT, (const char *)packet, MAVLINK_MSG_ID_MANUAL_SETPOINT_LEN, MAVLINK_MSG_ID_MANUAL_SETPOINT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MANUAL_SETPOINT, (const char *)packet, MAVLINK_MSG_ID_MANUAL_SETPOINT_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE MANUAL_SETPOINT UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_memory_vect.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_memory_vect.h index 5f79329c2..2eb60cc0e 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_memory_vect.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_memory_vect.h @@ -173,6 +173,42 @@ static inline void mavlink_msg_memory_vect_send(mavlink_channel_t chan, uint16_t #endif } +#if MAVLINK_MSG_ID_MEMORY_VECT_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_memory_vect_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint16_t address, uint8_t ver, uint8_t type, const int8_t *value) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint16_t(buf, 0, address); + _mav_put_uint8_t(buf, 2, ver); + _mav_put_uint8_t(buf, 3, type); + _mav_put_int8_t_array(buf, 4, value, 32); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MEMORY_VECT, buf, MAVLINK_MSG_ID_MEMORY_VECT_LEN, MAVLINK_MSG_ID_MEMORY_VECT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MEMORY_VECT, buf, MAVLINK_MSG_ID_MEMORY_VECT_LEN); +#endif +#else + mavlink_memory_vect_t *packet = (mavlink_memory_vect_t *)msgbuf; + packet->address = address; + packet->ver = ver; + packet->type = type; + mav_array_memcpy(packet->value, value, sizeof(int8_t)*32); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MEMORY_VECT, (const char *)packet, MAVLINK_MSG_ID_MEMORY_VECT_LEN, MAVLINK_MSG_ID_MEMORY_VECT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MEMORY_VECT, (const char *)packet, MAVLINK_MSG_ID_MEMORY_VECT_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE MEMORY_VECT UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_ack.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_ack.h index 7421d8394..43afd00f7 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_ack.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_ack.h @@ -168,6 +168,42 @@ static inline void mavlink_msg_mission_ack_send(mavlink_channel_t chan, uint8_t #endif } +#if MAVLINK_MSG_ID_MISSION_ACK_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_mission_ack_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, uint8_t type) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint8_t(buf, 0, target_system); + _mav_put_uint8_t(buf, 1, target_component); + _mav_put_uint8_t(buf, 2, type); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_ACK, buf, MAVLINK_MSG_ID_MISSION_ACK_LEN, MAVLINK_MSG_ID_MISSION_ACK_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_ACK, buf, MAVLINK_MSG_ID_MISSION_ACK_LEN); +#endif +#else + mavlink_mission_ack_t *packet = (mavlink_mission_ack_t *)msgbuf; + packet->target_system = target_system; + packet->target_component = target_component; + packet->type = type; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_ACK, (const char *)packet, MAVLINK_MSG_ID_MISSION_ACK_LEN, MAVLINK_MSG_ID_MISSION_ACK_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_ACK, (const char *)packet, MAVLINK_MSG_ID_MISSION_ACK_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE MISSION_ACK UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_clear_all.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_clear_all.h index 8f441c8e5..120986873 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_clear_all.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_clear_all.h @@ -157,6 +157,40 @@ static inline void mavlink_msg_mission_clear_all_send(mavlink_channel_t chan, ui #endif } +#if MAVLINK_MSG_ID_MISSION_CLEAR_ALL_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_mission_clear_all_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint8_t(buf, 0, target_system); + _mav_put_uint8_t(buf, 1, target_component); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_CLEAR_ALL, buf, MAVLINK_MSG_ID_MISSION_CLEAR_ALL_LEN, MAVLINK_MSG_ID_MISSION_CLEAR_ALL_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_CLEAR_ALL, buf, MAVLINK_MSG_ID_MISSION_CLEAR_ALL_LEN); +#endif +#else + mavlink_mission_clear_all_t *packet = (mavlink_mission_clear_all_t *)msgbuf; + packet->target_system = target_system; + packet->target_component = target_component; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_CLEAR_ALL, (const char *)packet, MAVLINK_MSG_ID_MISSION_CLEAR_ALL_LEN, MAVLINK_MSG_ID_MISSION_CLEAR_ALL_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_CLEAR_ALL, (const char *)packet, MAVLINK_MSG_ID_MISSION_CLEAR_ALL_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE MISSION_CLEAR_ALL UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_count.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_count.h index eac779306..7e4748eae 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_count.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_count.h @@ -168,6 +168,42 @@ static inline void mavlink_msg_mission_count_send(mavlink_channel_t chan, uint8_ #endif } +#if MAVLINK_MSG_ID_MISSION_COUNT_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_mission_count_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, uint16_t count) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint16_t(buf, 0, count); + _mav_put_uint8_t(buf, 2, target_system); + _mav_put_uint8_t(buf, 3, target_component); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_COUNT, buf, MAVLINK_MSG_ID_MISSION_COUNT_LEN, MAVLINK_MSG_ID_MISSION_COUNT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_COUNT, buf, MAVLINK_MSG_ID_MISSION_COUNT_LEN); +#endif +#else + mavlink_mission_count_t *packet = (mavlink_mission_count_t *)msgbuf; + packet->count = count; + packet->target_system = target_system; + packet->target_component = target_component; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_COUNT, (const char *)packet, MAVLINK_MSG_ID_MISSION_COUNT_LEN, MAVLINK_MSG_ID_MISSION_COUNT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_COUNT, (const char *)packet, MAVLINK_MSG_ID_MISSION_COUNT_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE MISSION_COUNT UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_current.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_current.h index dbcdbd3f9..201b7a6fb 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_current.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_current.h @@ -146,6 +146,38 @@ static inline void mavlink_msg_mission_current_send(mavlink_channel_t chan, uint #endif } +#if MAVLINK_MSG_ID_MISSION_CURRENT_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_mission_current_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint16_t seq) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint16_t(buf, 0, seq); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_CURRENT, buf, MAVLINK_MSG_ID_MISSION_CURRENT_LEN, MAVLINK_MSG_ID_MISSION_CURRENT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_CURRENT, buf, MAVLINK_MSG_ID_MISSION_CURRENT_LEN); +#endif +#else + mavlink_mission_current_t *packet = (mavlink_mission_current_t *)msgbuf; + packet->seq = seq; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_CURRENT, (const char *)packet, MAVLINK_MSG_ID_MISSION_CURRENT_LEN, MAVLINK_MSG_ID_MISSION_CURRENT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_CURRENT, (const char *)packet, MAVLINK_MSG_ID_MISSION_CURRENT_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE MISSION_CURRENT UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_item.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_item.h index a8d60eca7..ef9394f00 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_item.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_item.h @@ -289,6 +289,64 @@ static inline void mavlink_msg_mission_item_send(mavlink_channel_t chan, uint8_t #endif } +#if MAVLINK_MSG_ID_MISSION_ITEM_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_mission_item_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, uint16_t seq, uint8_t frame, uint16_t command, uint8_t current, uint8_t autocontinue, float param1, float param2, float param3, float param4, float x, float y, float z) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, param1); + _mav_put_float(buf, 4, param2); + _mav_put_float(buf, 8, param3); + _mav_put_float(buf, 12, param4); + _mav_put_float(buf, 16, x); + _mav_put_float(buf, 20, y); + _mav_put_float(buf, 24, z); + _mav_put_uint16_t(buf, 28, seq); + _mav_put_uint16_t(buf, 30, command); + _mav_put_uint8_t(buf, 32, target_system); + _mav_put_uint8_t(buf, 33, target_component); + _mav_put_uint8_t(buf, 34, frame); + _mav_put_uint8_t(buf, 35, current); + _mav_put_uint8_t(buf, 36, autocontinue); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_ITEM, buf, MAVLINK_MSG_ID_MISSION_ITEM_LEN, MAVLINK_MSG_ID_MISSION_ITEM_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_ITEM, buf, MAVLINK_MSG_ID_MISSION_ITEM_LEN); +#endif +#else + mavlink_mission_item_t *packet = (mavlink_mission_item_t *)msgbuf; + packet->param1 = param1; + packet->param2 = param2; + packet->param3 = param3; + packet->param4 = param4; + packet->x = x; + packet->y = y; + packet->z = z; + packet->seq = seq; + packet->command = command; + packet->target_system = target_system; + packet->target_component = target_component; + packet->frame = frame; + packet->current = current; + packet->autocontinue = autocontinue; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_ITEM, (const char *)packet, MAVLINK_MSG_ID_MISSION_ITEM_LEN, MAVLINK_MSG_ID_MISSION_ITEM_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_ITEM, (const char *)packet, MAVLINK_MSG_ID_MISSION_ITEM_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE MISSION_ITEM UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_item_reached.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_item_reached.h index f3744fde6..9dfa28043 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_item_reached.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_item_reached.h @@ -146,6 +146,38 @@ static inline void mavlink_msg_mission_item_reached_send(mavlink_channel_t chan, #endif } +#if MAVLINK_MSG_ID_MISSION_ITEM_REACHED_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_mission_item_reached_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint16_t seq) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint16_t(buf, 0, seq); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_ITEM_REACHED, buf, MAVLINK_MSG_ID_MISSION_ITEM_REACHED_LEN, MAVLINK_MSG_ID_MISSION_ITEM_REACHED_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_ITEM_REACHED, buf, MAVLINK_MSG_ID_MISSION_ITEM_REACHED_LEN); +#endif +#else + mavlink_mission_item_reached_t *packet = (mavlink_mission_item_reached_t *)msgbuf; + packet->seq = seq; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_ITEM_REACHED, (const char *)packet, MAVLINK_MSG_ID_MISSION_ITEM_REACHED_LEN, MAVLINK_MSG_ID_MISSION_ITEM_REACHED_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_ITEM_REACHED, (const char *)packet, MAVLINK_MSG_ID_MISSION_ITEM_REACHED_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE MISSION_ITEM_REACHED UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_request.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_request.h index ac84e3554..29b0ef6ef 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_request.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_request.h @@ -168,6 +168,42 @@ static inline void mavlink_msg_mission_request_send(mavlink_channel_t chan, uint #endif } +#if MAVLINK_MSG_ID_MISSION_REQUEST_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_mission_request_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, uint16_t seq) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint16_t(buf, 0, seq); + _mav_put_uint8_t(buf, 2, target_system); + _mav_put_uint8_t(buf, 3, target_component); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_REQUEST, buf, MAVLINK_MSG_ID_MISSION_REQUEST_LEN, MAVLINK_MSG_ID_MISSION_REQUEST_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_REQUEST, buf, MAVLINK_MSG_ID_MISSION_REQUEST_LEN); +#endif +#else + mavlink_mission_request_t *packet = (mavlink_mission_request_t *)msgbuf; + packet->seq = seq; + packet->target_system = target_system; + packet->target_component = target_component; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_REQUEST, (const char *)packet, MAVLINK_MSG_ID_MISSION_REQUEST_LEN, MAVLINK_MSG_ID_MISSION_REQUEST_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_REQUEST, (const char *)packet, MAVLINK_MSG_ID_MISSION_REQUEST_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE MISSION_REQUEST UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_request_list.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_request_list.h index d999babdb..a275348ac 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_request_list.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_request_list.h @@ -157,6 +157,40 @@ static inline void mavlink_msg_mission_request_list_send(mavlink_channel_t chan, #endif } +#if MAVLINK_MSG_ID_MISSION_REQUEST_LIST_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_mission_request_list_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint8_t(buf, 0, target_system); + _mav_put_uint8_t(buf, 1, target_component); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_REQUEST_LIST, buf, MAVLINK_MSG_ID_MISSION_REQUEST_LIST_LEN, MAVLINK_MSG_ID_MISSION_REQUEST_LIST_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_REQUEST_LIST, buf, MAVLINK_MSG_ID_MISSION_REQUEST_LIST_LEN); +#endif +#else + mavlink_mission_request_list_t *packet = (mavlink_mission_request_list_t *)msgbuf; + packet->target_system = target_system; + packet->target_component = target_component; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_REQUEST_LIST, (const char *)packet, MAVLINK_MSG_ID_MISSION_REQUEST_LIST_LEN, MAVLINK_MSG_ID_MISSION_REQUEST_LIST_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_REQUEST_LIST, (const char *)packet, MAVLINK_MSG_ID_MISSION_REQUEST_LIST_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE MISSION_REQUEST_LIST UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_request_partial_list.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_request_partial_list.h index 35c7e1285..79a88dc08 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_request_partial_list.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_request_partial_list.h @@ -179,6 +179,44 @@ static inline void mavlink_msg_mission_request_partial_list_send(mavlink_channel #endif } +#if MAVLINK_MSG_ID_MISSION_REQUEST_PARTIAL_LIST_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_mission_request_partial_list_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, int16_t start_index, int16_t end_index) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_int16_t(buf, 0, start_index); + _mav_put_int16_t(buf, 2, end_index); + _mav_put_uint8_t(buf, 4, target_system); + _mav_put_uint8_t(buf, 5, target_component); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_REQUEST_PARTIAL_LIST, buf, MAVLINK_MSG_ID_MISSION_REQUEST_PARTIAL_LIST_LEN, MAVLINK_MSG_ID_MISSION_REQUEST_PARTIAL_LIST_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_REQUEST_PARTIAL_LIST, buf, MAVLINK_MSG_ID_MISSION_REQUEST_PARTIAL_LIST_LEN); +#endif +#else + mavlink_mission_request_partial_list_t *packet = (mavlink_mission_request_partial_list_t *)msgbuf; + packet->start_index = start_index; + packet->end_index = end_index; + packet->target_system = target_system; + packet->target_component = target_component; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_REQUEST_PARTIAL_LIST, (const char *)packet, MAVLINK_MSG_ID_MISSION_REQUEST_PARTIAL_LIST_LEN, MAVLINK_MSG_ID_MISSION_REQUEST_PARTIAL_LIST_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_REQUEST_PARTIAL_LIST, (const char *)packet, MAVLINK_MSG_ID_MISSION_REQUEST_PARTIAL_LIST_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE MISSION_REQUEST_PARTIAL_LIST UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_set_current.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_set_current.h index 63b37cf8c..0c2a3ada4 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_set_current.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_set_current.h @@ -168,6 +168,42 @@ static inline void mavlink_msg_mission_set_current_send(mavlink_channel_t chan, #endif } +#if MAVLINK_MSG_ID_MISSION_SET_CURRENT_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_mission_set_current_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, uint16_t seq) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint16_t(buf, 0, seq); + _mav_put_uint8_t(buf, 2, target_system); + _mav_put_uint8_t(buf, 3, target_component); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_SET_CURRENT, buf, MAVLINK_MSG_ID_MISSION_SET_CURRENT_LEN, MAVLINK_MSG_ID_MISSION_SET_CURRENT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_SET_CURRENT, buf, MAVLINK_MSG_ID_MISSION_SET_CURRENT_LEN); +#endif +#else + mavlink_mission_set_current_t *packet = (mavlink_mission_set_current_t *)msgbuf; + packet->seq = seq; + packet->target_system = target_system; + packet->target_component = target_component; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_SET_CURRENT, (const char *)packet, MAVLINK_MSG_ID_MISSION_SET_CURRENT_LEN, MAVLINK_MSG_ID_MISSION_SET_CURRENT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_SET_CURRENT, (const char *)packet, MAVLINK_MSG_ID_MISSION_SET_CURRENT_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE MISSION_SET_CURRENT UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_write_partial_list.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_write_partial_list.h index 7de38bd7b..17a5a6bdd 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_write_partial_list.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_mission_write_partial_list.h @@ -179,6 +179,44 @@ static inline void mavlink_msg_mission_write_partial_list_send(mavlink_channel_t #endif } +#if MAVLINK_MSG_ID_MISSION_WRITE_PARTIAL_LIST_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_mission_write_partial_list_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, int16_t start_index, int16_t end_index) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_int16_t(buf, 0, start_index); + _mav_put_int16_t(buf, 2, end_index); + _mav_put_uint8_t(buf, 4, target_system); + _mav_put_uint8_t(buf, 5, target_component); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_WRITE_PARTIAL_LIST, buf, MAVLINK_MSG_ID_MISSION_WRITE_PARTIAL_LIST_LEN, MAVLINK_MSG_ID_MISSION_WRITE_PARTIAL_LIST_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_WRITE_PARTIAL_LIST, buf, MAVLINK_MSG_ID_MISSION_WRITE_PARTIAL_LIST_LEN); +#endif +#else + mavlink_mission_write_partial_list_t *packet = (mavlink_mission_write_partial_list_t *)msgbuf; + packet->start_index = start_index; + packet->end_index = end_index; + packet->target_system = target_system; + packet->target_component = target_component; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_WRITE_PARTIAL_LIST, (const char *)packet, MAVLINK_MSG_ID_MISSION_WRITE_PARTIAL_LIST_LEN, MAVLINK_MSG_ID_MISSION_WRITE_PARTIAL_LIST_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MISSION_WRITE_PARTIAL_LIST, (const char *)packet, MAVLINK_MSG_ID_MISSION_WRITE_PARTIAL_LIST_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE MISSION_WRITE_PARTIAL_LIST UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_named_value_float.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_named_value_float.h index fbf4f75c9..df82704a4 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_named_value_float.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_named_value_float.h @@ -162,6 +162,40 @@ static inline void mavlink_msg_named_value_float_send(mavlink_channel_t chan, ui #endif } +#if MAVLINK_MSG_ID_NAMED_VALUE_FLOAT_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_named_value_float_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint32_t time_boot_ms, const char *name, float value) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, time_boot_ms); + _mav_put_float(buf, 4, value); + _mav_put_char_array(buf, 8, name, 10); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_NAMED_VALUE_FLOAT, buf, MAVLINK_MSG_ID_NAMED_VALUE_FLOAT_LEN, MAVLINK_MSG_ID_NAMED_VALUE_FLOAT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_NAMED_VALUE_FLOAT, buf, MAVLINK_MSG_ID_NAMED_VALUE_FLOAT_LEN); +#endif +#else + mavlink_named_value_float_t *packet = (mavlink_named_value_float_t *)msgbuf; + packet->time_boot_ms = time_boot_ms; + packet->value = value; + mav_array_memcpy(packet->name, name, sizeof(char)*10); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_NAMED_VALUE_FLOAT, (const char *)packet, MAVLINK_MSG_ID_NAMED_VALUE_FLOAT_LEN, MAVLINK_MSG_ID_NAMED_VALUE_FLOAT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_NAMED_VALUE_FLOAT, (const char *)packet, MAVLINK_MSG_ID_NAMED_VALUE_FLOAT_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE NAMED_VALUE_FLOAT UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_named_value_int.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_named_value_int.h index 052f24793..cfdd73d61 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_named_value_int.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_named_value_int.h @@ -162,6 +162,40 @@ static inline void mavlink_msg_named_value_int_send(mavlink_channel_t chan, uint #endif } +#if MAVLINK_MSG_ID_NAMED_VALUE_INT_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_named_value_int_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint32_t time_boot_ms, const char *name, int32_t value) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, time_boot_ms); + _mav_put_int32_t(buf, 4, value); + _mav_put_char_array(buf, 8, name, 10); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_NAMED_VALUE_INT, buf, MAVLINK_MSG_ID_NAMED_VALUE_INT_LEN, MAVLINK_MSG_ID_NAMED_VALUE_INT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_NAMED_VALUE_INT, buf, MAVLINK_MSG_ID_NAMED_VALUE_INT_LEN); +#endif +#else + mavlink_named_value_int_t *packet = (mavlink_named_value_int_t *)msgbuf; + packet->time_boot_ms = time_boot_ms; + packet->value = value; + mav_array_memcpy(packet->name, name, sizeof(char)*10); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_NAMED_VALUE_INT, (const char *)packet, MAVLINK_MSG_ID_NAMED_VALUE_INT_LEN, MAVLINK_MSG_ID_NAMED_VALUE_INT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_NAMED_VALUE_INT, (const char *)packet, MAVLINK_MSG_ID_NAMED_VALUE_INT_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE NAMED_VALUE_INT UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_nav_controller_output.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_nav_controller_output.h index e95c144de..b9a748b22 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_nav_controller_output.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_nav_controller_output.h @@ -223,6 +223,52 @@ static inline void mavlink_msg_nav_controller_output_send(mavlink_channel_t chan #endif } +#if MAVLINK_MSG_ID_NAV_CONTROLLER_OUTPUT_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_nav_controller_output_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, float nav_roll, float nav_pitch, int16_t nav_bearing, int16_t target_bearing, uint16_t wp_dist, float alt_error, float aspd_error, float xtrack_error) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, nav_roll); + _mav_put_float(buf, 4, nav_pitch); + _mav_put_float(buf, 8, alt_error); + _mav_put_float(buf, 12, aspd_error); + _mav_put_float(buf, 16, xtrack_error); + _mav_put_int16_t(buf, 20, nav_bearing); + _mav_put_int16_t(buf, 22, target_bearing); + _mav_put_uint16_t(buf, 24, wp_dist); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_NAV_CONTROLLER_OUTPUT, buf, MAVLINK_MSG_ID_NAV_CONTROLLER_OUTPUT_LEN, MAVLINK_MSG_ID_NAV_CONTROLLER_OUTPUT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_NAV_CONTROLLER_OUTPUT, buf, MAVLINK_MSG_ID_NAV_CONTROLLER_OUTPUT_LEN); +#endif +#else + mavlink_nav_controller_output_t *packet = (mavlink_nav_controller_output_t *)msgbuf; + packet->nav_roll = nav_roll; + packet->nav_pitch = nav_pitch; + packet->alt_error = alt_error; + packet->aspd_error = aspd_error; + packet->xtrack_error = xtrack_error; + packet->nav_bearing = nav_bearing; + packet->target_bearing = target_bearing; + packet->wp_dist = wp_dist; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_NAV_CONTROLLER_OUTPUT, (const char *)packet, MAVLINK_MSG_ID_NAV_CONTROLLER_OUTPUT_LEN, MAVLINK_MSG_ID_NAV_CONTROLLER_OUTPUT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_NAV_CONTROLLER_OUTPUT, (const char *)packet, MAVLINK_MSG_ID_NAV_CONTROLLER_OUTPUT_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE NAV_CONTROLLER_OUTPUT UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_omnidirectional_flow.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_omnidirectional_flow.h index 4debb6e66..4ee9c452f 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_omnidirectional_flow.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_omnidirectional_flow.h @@ -196,6 +196,46 @@ static inline void mavlink_msg_omnidirectional_flow_send(mavlink_channel_t chan, #endif } +#if MAVLINK_MSG_ID_OMNIDIRECTIONAL_FLOW_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_omnidirectional_flow_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint64_t time_usec, uint8_t sensor_id, const int16_t *left, const int16_t *right, uint8_t quality, float front_distance_m) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint64_t(buf, 0, time_usec); + _mav_put_float(buf, 8, front_distance_m); + _mav_put_uint8_t(buf, 52, sensor_id); + _mav_put_uint8_t(buf, 53, quality); + _mav_put_int16_t_array(buf, 12, left, 10); + _mav_put_int16_t_array(buf, 32, right, 10); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OMNIDIRECTIONAL_FLOW, buf, MAVLINK_MSG_ID_OMNIDIRECTIONAL_FLOW_LEN, MAVLINK_MSG_ID_OMNIDIRECTIONAL_FLOW_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OMNIDIRECTIONAL_FLOW, buf, MAVLINK_MSG_ID_OMNIDIRECTIONAL_FLOW_LEN); +#endif +#else + mavlink_omnidirectional_flow_t *packet = (mavlink_omnidirectional_flow_t *)msgbuf; + packet->time_usec = time_usec; + packet->front_distance_m = front_distance_m; + packet->sensor_id = sensor_id; + packet->quality = quality; + mav_array_memcpy(packet->left, left, sizeof(int16_t)*10); + mav_array_memcpy(packet->right, right, sizeof(int16_t)*10); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OMNIDIRECTIONAL_FLOW, (const char *)packet, MAVLINK_MSG_ID_OMNIDIRECTIONAL_FLOW_LEN, MAVLINK_MSG_ID_OMNIDIRECTIONAL_FLOW_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OMNIDIRECTIONAL_FLOW, (const char *)packet, MAVLINK_MSG_ID_OMNIDIRECTIONAL_FLOW_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE OMNIDIRECTIONAL_FLOW UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_optical_flow.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_optical_flow.h index cf6db9147..6a2efc664 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_optical_flow.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_optical_flow.h @@ -223,6 +223,52 @@ static inline void mavlink_msg_optical_flow_send(mavlink_channel_t chan, uint64_ #endif } +#if MAVLINK_MSG_ID_OPTICAL_FLOW_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_optical_flow_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint64_t time_usec, uint8_t sensor_id, int16_t flow_x, int16_t flow_y, float flow_comp_m_x, float flow_comp_m_y, uint8_t quality, float ground_distance) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint64_t(buf, 0, time_usec); + _mav_put_float(buf, 8, flow_comp_m_x); + _mav_put_float(buf, 12, flow_comp_m_y); + _mav_put_float(buf, 16, ground_distance); + _mav_put_int16_t(buf, 20, flow_x); + _mav_put_int16_t(buf, 22, flow_y); + _mav_put_uint8_t(buf, 24, sensor_id); + _mav_put_uint8_t(buf, 25, quality); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OPTICAL_FLOW, buf, MAVLINK_MSG_ID_OPTICAL_FLOW_LEN, MAVLINK_MSG_ID_OPTICAL_FLOW_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OPTICAL_FLOW, buf, MAVLINK_MSG_ID_OPTICAL_FLOW_LEN); +#endif +#else + mavlink_optical_flow_t *packet = (mavlink_optical_flow_t *)msgbuf; + packet->time_usec = time_usec; + packet->flow_comp_m_x = flow_comp_m_x; + packet->flow_comp_m_y = flow_comp_m_y; + packet->ground_distance = ground_distance; + packet->flow_x = flow_x; + packet->flow_y = flow_y; + packet->sensor_id = sensor_id; + packet->quality = quality; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OPTICAL_FLOW, (const char *)packet, MAVLINK_MSG_ID_OPTICAL_FLOW_LEN, MAVLINK_MSG_ID_OPTICAL_FLOW_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OPTICAL_FLOW, (const char *)packet, MAVLINK_MSG_ID_OPTICAL_FLOW_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE OPTICAL_FLOW UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_param_request_list.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_param_request_list.h index 39e007274..f9466b002 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_param_request_list.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_param_request_list.h @@ -157,6 +157,40 @@ static inline void mavlink_msg_param_request_list_send(mavlink_channel_t chan, u #endif } +#if MAVLINK_MSG_ID_PARAM_REQUEST_LIST_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_param_request_list_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint8_t(buf, 0, target_system); + _mav_put_uint8_t(buf, 1, target_component); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PARAM_REQUEST_LIST, buf, MAVLINK_MSG_ID_PARAM_REQUEST_LIST_LEN, MAVLINK_MSG_ID_PARAM_REQUEST_LIST_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PARAM_REQUEST_LIST, buf, MAVLINK_MSG_ID_PARAM_REQUEST_LIST_LEN); +#endif +#else + mavlink_param_request_list_t *packet = (mavlink_param_request_list_t *)msgbuf; + packet->target_system = target_system; + packet->target_component = target_component; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PARAM_REQUEST_LIST, (const char *)packet, MAVLINK_MSG_ID_PARAM_REQUEST_LIST_LEN, MAVLINK_MSG_ID_PARAM_REQUEST_LIST_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PARAM_REQUEST_LIST, (const char *)packet, MAVLINK_MSG_ID_PARAM_REQUEST_LIST_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE PARAM_REQUEST_LIST UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_param_request_read.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_param_request_read.h index 5d9113114..730cff066 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_param_request_read.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_param_request_read.h @@ -173,6 +173,42 @@ static inline void mavlink_msg_param_request_read_send(mavlink_channel_t chan, u #endif } +#if MAVLINK_MSG_ID_PARAM_REQUEST_READ_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_param_request_read_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, const char *param_id, int16_t param_index) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_int16_t(buf, 0, param_index); + _mav_put_uint8_t(buf, 2, target_system); + _mav_put_uint8_t(buf, 3, target_component); + _mav_put_char_array(buf, 4, param_id, 16); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PARAM_REQUEST_READ, buf, MAVLINK_MSG_ID_PARAM_REQUEST_READ_LEN, MAVLINK_MSG_ID_PARAM_REQUEST_READ_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PARAM_REQUEST_READ, buf, MAVLINK_MSG_ID_PARAM_REQUEST_READ_LEN); +#endif +#else + mavlink_param_request_read_t *packet = (mavlink_param_request_read_t *)msgbuf; + packet->param_index = param_index; + packet->target_system = target_system; + packet->target_component = target_component; + mav_array_memcpy(packet->param_id, param_id, sizeof(char)*16); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PARAM_REQUEST_READ, (const char *)packet, MAVLINK_MSG_ID_PARAM_REQUEST_READ_LEN, MAVLINK_MSG_ID_PARAM_REQUEST_READ_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PARAM_REQUEST_READ, (const char *)packet, MAVLINK_MSG_ID_PARAM_REQUEST_READ_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE PARAM_REQUEST_READ UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_param_set.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_param_set.h index 1bd1f0059..f669af1a2 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_param_set.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_param_set.h @@ -184,6 +184,44 @@ static inline void mavlink_msg_param_set_send(mavlink_channel_t chan, uint8_t ta #endif } +#if MAVLINK_MSG_ID_PARAM_SET_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_param_set_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, const char *param_id, float param_value, uint8_t param_type) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, param_value); + _mav_put_uint8_t(buf, 4, target_system); + _mav_put_uint8_t(buf, 5, target_component); + _mav_put_uint8_t(buf, 22, param_type); + _mav_put_char_array(buf, 6, param_id, 16); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PARAM_SET, buf, MAVLINK_MSG_ID_PARAM_SET_LEN, MAVLINK_MSG_ID_PARAM_SET_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PARAM_SET, buf, MAVLINK_MSG_ID_PARAM_SET_LEN); +#endif +#else + mavlink_param_set_t *packet = (mavlink_param_set_t *)msgbuf; + packet->param_value = param_value; + packet->target_system = target_system; + packet->target_component = target_component; + packet->param_type = param_type; + mav_array_memcpy(packet->param_id, param_id, sizeof(char)*16); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PARAM_SET, (const char *)packet, MAVLINK_MSG_ID_PARAM_SET_LEN, MAVLINK_MSG_ID_PARAM_SET_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PARAM_SET, (const char *)packet, MAVLINK_MSG_ID_PARAM_SET_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE PARAM_SET UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_param_value.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_param_value.h index 17c759811..c27957913 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_param_value.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_param_value.h @@ -184,6 +184,44 @@ static inline void mavlink_msg_param_value_send(mavlink_channel_t chan, const ch #endif } +#if MAVLINK_MSG_ID_PARAM_VALUE_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_param_value_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, const char *param_id, float param_value, uint8_t param_type, uint16_t param_count, uint16_t param_index) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, param_value); + _mav_put_uint16_t(buf, 4, param_count); + _mav_put_uint16_t(buf, 6, param_index); + _mav_put_uint8_t(buf, 24, param_type); + _mav_put_char_array(buf, 8, param_id, 16); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PARAM_VALUE, buf, MAVLINK_MSG_ID_PARAM_VALUE_LEN, MAVLINK_MSG_ID_PARAM_VALUE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PARAM_VALUE, buf, MAVLINK_MSG_ID_PARAM_VALUE_LEN); +#endif +#else + mavlink_param_value_t *packet = (mavlink_param_value_t *)msgbuf; + packet->param_value = param_value; + packet->param_count = param_count; + packet->param_index = param_index; + packet->param_type = param_type; + mav_array_memcpy(packet->param_id, param_id, sizeof(char)*16); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PARAM_VALUE, (const char *)packet, MAVLINK_MSG_ID_PARAM_VALUE_LEN, MAVLINK_MSG_ID_PARAM_VALUE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PARAM_VALUE, (const char *)packet, MAVLINK_MSG_ID_PARAM_VALUE_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE PARAM_VALUE UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_ping.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_ping.h index 0c68ca176..b1501ba1f 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_ping.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_ping.h @@ -179,6 +179,44 @@ static inline void mavlink_msg_ping_send(mavlink_channel_t chan, uint64_t time_u #endif } +#if MAVLINK_MSG_ID_PING_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_ping_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint64_t time_usec, uint32_t seq, uint8_t target_system, uint8_t target_component) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint64_t(buf, 0, time_usec); + _mav_put_uint32_t(buf, 8, seq); + _mav_put_uint8_t(buf, 12, target_system); + _mav_put_uint8_t(buf, 13, target_component); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PING, buf, MAVLINK_MSG_ID_PING_LEN, MAVLINK_MSG_ID_PING_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PING, buf, MAVLINK_MSG_ID_PING_LEN); +#endif +#else + mavlink_ping_t *packet = (mavlink_ping_t *)msgbuf; + packet->time_usec = time_usec; + packet->seq = seq; + packet->target_system = target_system; + packet->target_component = target_component; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PING, (const char *)packet, MAVLINK_MSG_ID_PING_LEN, MAVLINK_MSG_ID_PING_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PING, (const char *)packet, MAVLINK_MSG_ID_PING_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE PING UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_power_status.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_power_status.h new file mode 100644 index 000000000..1a6259aa3 --- /dev/null +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_power_status.h @@ -0,0 +1,257 @@ +// MESSAGE POWER_STATUS PACKING + +#define MAVLINK_MSG_ID_POWER_STATUS 125 + +typedef struct __mavlink_power_status_t +{ + uint16_t Vcc; ///< 5V rail voltage in millivolts + uint16_t Vservo; ///< servo rail voltage in millivolts + uint16_t flags; ///< power supply status flags (see MAV_POWER_STATUS enum) +} mavlink_power_status_t; + +#define MAVLINK_MSG_ID_POWER_STATUS_LEN 6 +#define MAVLINK_MSG_ID_125_LEN 6 + +#define MAVLINK_MSG_ID_POWER_STATUS_CRC 203 +#define MAVLINK_MSG_ID_125_CRC 203 + + + +#define MAVLINK_MESSAGE_INFO_POWER_STATUS { \ + "POWER_STATUS", \ + 3, \ + { { "Vcc", NULL, MAVLINK_TYPE_UINT16_T, 0, 0, offsetof(mavlink_power_status_t, Vcc) }, \ + { "Vservo", NULL, MAVLINK_TYPE_UINT16_T, 0, 2, offsetof(mavlink_power_status_t, Vservo) }, \ + { "flags", NULL, MAVLINK_TYPE_UINT16_T, 0, 4, offsetof(mavlink_power_status_t, flags) }, \ + } \ +} + + +/** + * @brief Pack a power_status message + * @param system_id ID of this system + * @param component_id ID of this component (e.g. 200 for IMU) + * @param msg The MAVLink message to compress the data into + * + * @param Vcc 5V rail voltage in millivolts + * @param Vservo servo rail voltage in millivolts + * @param flags power supply status flags (see MAV_POWER_STATUS enum) + * @return length of the message in bytes (excluding serial stream start sign) + */ +static inline uint16_t mavlink_msg_power_status_pack(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, + uint16_t Vcc, uint16_t Vservo, uint16_t flags) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char buf[MAVLINK_MSG_ID_POWER_STATUS_LEN]; + _mav_put_uint16_t(buf, 0, Vcc); + _mav_put_uint16_t(buf, 2, Vservo); + _mav_put_uint16_t(buf, 4, flags); + + memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, MAVLINK_MSG_ID_POWER_STATUS_LEN); +#else + mavlink_power_status_t packet; + packet.Vcc = Vcc; + packet.Vservo = Vservo; + packet.flags = flags; + + memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, MAVLINK_MSG_ID_POWER_STATUS_LEN); +#endif + + msg->msgid = MAVLINK_MSG_ID_POWER_STATUS; +#if MAVLINK_CRC_EXTRA + return mavlink_finalize_message(msg, system_id, component_id, MAVLINK_MSG_ID_POWER_STATUS_LEN, MAVLINK_MSG_ID_POWER_STATUS_CRC); +#else + return mavlink_finalize_message(msg, system_id, component_id, MAVLINK_MSG_ID_POWER_STATUS_LEN); +#endif +} + +/** + * @brief Pack a power_status message on a channel + * @param system_id ID of this system + * @param component_id ID of this component (e.g. 200 for IMU) + * @param chan The MAVLink channel this message will be sent over + * @param msg The MAVLink message to compress the data into + * @param Vcc 5V rail voltage in millivolts + * @param Vservo servo rail voltage in millivolts + * @param flags power supply status flags (see MAV_POWER_STATUS enum) + * @return length of the message in bytes (excluding serial stream start sign) + */ +static inline uint16_t mavlink_msg_power_status_pack_chan(uint8_t system_id, uint8_t component_id, uint8_t chan, + mavlink_message_t* msg, + uint16_t Vcc,uint16_t Vservo,uint16_t flags) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char buf[MAVLINK_MSG_ID_POWER_STATUS_LEN]; + _mav_put_uint16_t(buf, 0, Vcc); + _mav_put_uint16_t(buf, 2, Vservo); + _mav_put_uint16_t(buf, 4, flags); + + memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, MAVLINK_MSG_ID_POWER_STATUS_LEN); +#else + mavlink_power_status_t packet; + packet.Vcc = Vcc; + packet.Vservo = Vservo; + packet.flags = flags; + + memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, MAVLINK_MSG_ID_POWER_STATUS_LEN); +#endif + + msg->msgid = MAVLINK_MSG_ID_POWER_STATUS; +#if MAVLINK_CRC_EXTRA + return mavlink_finalize_message_chan(msg, system_id, component_id, chan, MAVLINK_MSG_ID_POWER_STATUS_LEN, MAVLINK_MSG_ID_POWER_STATUS_CRC); +#else + return mavlink_finalize_message_chan(msg, system_id, component_id, chan, MAVLINK_MSG_ID_POWER_STATUS_LEN); +#endif +} + +/** + * @brief Encode a power_status struct + * + * @param system_id ID of this system + * @param component_id ID of this component (e.g. 200 for IMU) + * @param msg The MAVLink message to compress the data into + * @param power_status C-struct to read the message contents from + */ +static inline uint16_t mavlink_msg_power_status_encode(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, const mavlink_power_status_t* power_status) +{ + return mavlink_msg_power_status_pack(system_id, component_id, msg, power_status->Vcc, power_status->Vservo, power_status->flags); +} + +/** + * @brief Encode a power_status struct on a channel + * + * @param system_id ID of this system + * @param component_id ID of this component (e.g. 200 for IMU) + * @param chan The MAVLink channel this message will be sent over + * @param msg The MAVLink message to compress the data into + * @param power_status C-struct to read the message contents from + */ +static inline uint16_t mavlink_msg_power_status_encode_chan(uint8_t system_id, uint8_t component_id, uint8_t chan, mavlink_message_t* msg, const mavlink_power_status_t* power_status) +{ + return mavlink_msg_power_status_pack_chan(system_id, component_id, chan, msg, power_status->Vcc, power_status->Vservo, power_status->flags); +} + +/** + * @brief Send a power_status message + * @param chan MAVLink channel to send the message + * + * @param Vcc 5V rail voltage in millivolts + * @param Vservo servo rail voltage in millivolts + * @param flags power supply status flags (see MAV_POWER_STATUS enum) + */ +#ifdef MAVLINK_USE_CONVENIENCE_FUNCTIONS + +static inline void mavlink_msg_power_status_send(mavlink_channel_t chan, uint16_t Vcc, uint16_t Vservo, uint16_t flags) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char buf[MAVLINK_MSG_ID_POWER_STATUS_LEN]; + _mav_put_uint16_t(buf, 0, Vcc); + _mav_put_uint16_t(buf, 2, Vservo); + _mav_put_uint16_t(buf, 4, flags); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_POWER_STATUS, buf, MAVLINK_MSG_ID_POWER_STATUS_LEN, MAVLINK_MSG_ID_POWER_STATUS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_POWER_STATUS, buf, MAVLINK_MSG_ID_POWER_STATUS_LEN); +#endif +#else + mavlink_power_status_t packet; + packet.Vcc = Vcc; + packet.Vservo = Vservo; + packet.flags = flags; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_POWER_STATUS, (const char *)&packet, MAVLINK_MSG_ID_POWER_STATUS_LEN, MAVLINK_MSG_ID_POWER_STATUS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_POWER_STATUS, (const char *)&packet, MAVLINK_MSG_ID_POWER_STATUS_LEN); +#endif +#endif +} + +#if MAVLINK_MSG_ID_POWER_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_power_status_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint16_t Vcc, uint16_t Vservo, uint16_t flags) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint16_t(buf, 0, Vcc); + _mav_put_uint16_t(buf, 2, Vservo); + _mav_put_uint16_t(buf, 4, flags); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_POWER_STATUS, buf, MAVLINK_MSG_ID_POWER_STATUS_LEN, MAVLINK_MSG_ID_POWER_STATUS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_POWER_STATUS, buf, MAVLINK_MSG_ID_POWER_STATUS_LEN); +#endif +#else + mavlink_power_status_t *packet = (mavlink_power_status_t *)msgbuf; + packet->Vcc = Vcc; + packet->Vservo = Vservo; + packet->flags = flags; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_POWER_STATUS, (const char *)packet, MAVLINK_MSG_ID_POWER_STATUS_LEN, MAVLINK_MSG_ID_POWER_STATUS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_POWER_STATUS, (const char *)packet, MAVLINK_MSG_ID_POWER_STATUS_LEN); +#endif +#endif +} +#endif + +#endif + +// MESSAGE POWER_STATUS UNPACKING + + +/** + * @brief Get field Vcc from power_status message + * + * @return 5V rail voltage in millivolts + */ +static inline uint16_t mavlink_msg_power_status_get_Vcc(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint16_t(msg, 0); +} + +/** + * @brief Get field Vservo from power_status message + * + * @return servo rail voltage in millivolts + */ +static inline uint16_t mavlink_msg_power_status_get_Vservo(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint16_t(msg, 2); +} + +/** + * @brief Get field flags from power_status message + * + * @return power supply status flags (see MAV_POWER_STATUS enum) + */ +static inline uint16_t mavlink_msg_power_status_get_flags(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint16_t(msg, 4); +} + +/** + * @brief Decode a power_status message into a struct + * + * @param msg The message to decode + * @param power_status C-struct to decode the message contents into + */ +static inline void mavlink_msg_power_status_decode(const mavlink_message_t* msg, mavlink_power_status_t* power_status) +{ +#if MAVLINK_NEED_BYTE_SWAP + power_status->Vcc = mavlink_msg_power_status_get_Vcc(msg); + power_status->Vservo = mavlink_msg_power_status_get_Vservo(msg); + power_status->flags = mavlink_msg_power_status_get_flags(msg); +#else + memcpy(power_status, _MAV_PAYLOAD(msg), MAVLINK_MSG_ID_POWER_STATUS_LEN); +#endif +} diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_radio_status.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_radio_status.h index fceb7d168..5763008fe 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_radio_status.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_radio_status.h @@ -212,6 +212,50 @@ static inline void mavlink_msg_radio_status_send(mavlink_channel_t chan, uint8_t #endif } +#if MAVLINK_MSG_ID_RADIO_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_radio_status_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t rssi, uint8_t remrssi, uint8_t txbuf, uint8_t noise, uint8_t remnoise, uint16_t rxerrors, uint16_t fixed) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint16_t(buf, 0, rxerrors); + _mav_put_uint16_t(buf, 2, fixed); + _mav_put_uint8_t(buf, 4, rssi); + _mav_put_uint8_t(buf, 5, remrssi); + _mav_put_uint8_t(buf, 6, txbuf); + _mav_put_uint8_t(buf, 7, noise); + _mav_put_uint8_t(buf, 8, remnoise); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RADIO_STATUS, buf, MAVLINK_MSG_ID_RADIO_STATUS_LEN, MAVLINK_MSG_ID_RADIO_STATUS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RADIO_STATUS, buf, MAVLINK_MSG_ID_RADIO_STATUS_LEN); +#endif +#else + mavlink_radio_status_t *packet = (mavlink_radio_status_t *)msgbuf; + packet->rxerrors = rxerrors; + packet->fixed = fixed; + packet->rssi = rssi; + packet->remrssi = remrssi; + packet->txbuf = txbuf; + packet->noise = noise; + packet->remnoise = remnoise; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RADIO_STATUS, (const char *)packet, MAVLINK_MSG_ID_RADIO_STATUS_LEN, MAVLINK_MSG_ID_RADIO_STATUS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RADIO_STATUS, (const char *)packet, MAVLINK_MSG_ID_RADIO_STATUS_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE RADIO_STATUS UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_raw_imu.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_raw_imu.h index 62a9b6eea..a98e8ce72 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_raw_imu.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_raw_imu.h @@ -245,6 +245,56 @@ static inline void mavlink_msg_raw_imu_send(mavlink_channel_t chan, uint64_t tim #endif } +#if MAVLINK_MSG_ID_RAW_IMU_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_raw_imu_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint64_t time_usec, int16_t xacc, int16_t yacc, int16_t zacc, int16_t xgyro, int16_t ygyro, int16_t zgyro, int16_t xmag, int16_t ymag, int16_t zmag) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint64_t(buf, 0, time_usec); + _mav_put_int16_t(buf, 8, xacc); + _mav_put_int16_t(buf, 10, yacc); + _mav_put_int16_t(buf, 12, zacc); + _mav_put_int16_t(buf, 14, xgyro); + _mav_put_int16_t(buf, 16, ygyro); + _mav_put_int16_t(buf, 18, zgyro); + _mav_put_int16_t(buf, 20, xmag); + _mav_put_int16_t(buf, 22, ymag); + _mav_put_int16_t(buf, 24, zmag); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RAW_IMU, buf, MAVLINK_MSG_ID_RAW_IMU_LEN, MAVLINK_MSG_ID_RAW_IMU_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RAW_IMU, buf, MAVLINK_MSG_ID_RAW_IMU_LEN); +#endif +#else + mavlink_raw_imu_t *packet = (mavlink_raw_imu_t *)msgbuf; + packet->time_usec = time_usec; + packet->xacc = xacc; + packet->yacc = yacc; + packet->zacc = zacc; + packet->xgyro = xgyro; + packet->ygyro = ygyro; + packet->zgyro = zgyro; + packet->xmag = xmag; + packet->ymag = ymag; + packet->zmag = zmag; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RAW_IMU, (const char *)packet, MAVLINK_MSG_ID_RAW_IMU_LEN, MAVLINK_MSG_ID_RAW_IMU_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RAW_IMU, (const char *)packet, MAVLINK_MSG_ID_RAW_IMU_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE RAW_IMU UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_raw_pressure.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_raw_pressure.h index 82c5fad4a..6bd37fcae 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_raw_pressure.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_raw_pressure.h @@ -190,6 +190,46 @@ static inline void mavlink_msg_raw_pressure_send(mavlink_channel_t chan, uint64_ #endif } +#if MAVLINK_MSG_ID_RAW_PRESSURE_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_raw_pressure_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint64_t time_usec, int16_t press_abs, int16_t press_diff1, int16_t press_diff2, int16_t temperature) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint64_t(buf, 0, time_usec); + _mav_put_int16_t(buf, 8, press_abs); + _mav_put_int16_t(buf, 10, press_diff1); + _mav_put_int16_t(buf, 12, press_diff2); + _mav_put_int16_t(buf, 14, temperature); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RAW_PRESSURE, buf, MAVLINK_MSG_ID_RAW_PRESSURE_LEN, MAVLINK_MSG_ID_RAW_PRESSURE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RAW_PRESSURE, buf, MAVLINK_MSG_ID_RAW_PRESSURE_LEN); +#endif +#else + mavlink_raw_pressure_t *packet = (mavlink_raw_pressure_t *)msgbuf; + packet->time_usec = time_usec; + packet->press_abs = press_abs; + packet->press_diff1 = press_diff1; + packet->press_diff2 = press_diff2; + packet->temperature = temperature; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RAW_PRESSURE, (const char *)packet, MAVLINK_MSG_ID_RAW_PRESSURE_LEN, MAVLINK_MSG_ID_RAW_PRESSURE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RAW_PRESSURE, (const char *)packet, MAVLINK_MSG_ID_RAW_PRESSURE_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE RAW_PRESSURE UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_rc_channels.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_rc_channels.h new file mode 100644 index 000000000..479af122f --- /dev/null +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_rc_channels.h @@ -0,0 +1,689 @@ +// MESSAGE RC_CHANNELS PACKING + +#define MAVLINK_MSG_ID_RC_CHANNELS 65 + +typedef struct __mavlink_rc_channels_t +{ + uint32_t time_boot_ms; ///< Timestamp (milliseconds since system boot) + uint16_t chan1_raw; ///< RC channel 1 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + uint16_t chan2_raw; ///< RC channel 2 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + uint16_t chan3_raw; ///< RC channel 3 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + uint16_t chan4_raw; ///< RC channel 4 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + uint16_t chan5_raw; ///< RC channel 5 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + uint16_t chan6_raw; ///< RC channel 6 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + uint16_t chan7_raw; ///< RC channel 7 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + uint16_t chan8_raw; ///< RC channel 8 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + uint16_t chan9_raw; ///< RC channel 9 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + uint16_t chan10_raw; ///< RC channel 10 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + uint16_t chan11_raw; ///< RC channel 11 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + uint16_t chan12_raw; ///< RC channel 12 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + uint16_t chan13_raw; ///< RC channel 13 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + uint16_t chan14_raw; ///< RC channel 14 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + uint16_t chan15_raw; ///< RC channel 15 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + uint16_t chan16_raw; ///< RC channel 16 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + uint16_t chan17_raw; ///< RC channel 17 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + uint16_t chan18_raw; ///< RC channel 18 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + uint8_t chancount; ///< Total number of RC channels being received. This can be larger than 18, indicating that more channels are available but not given in this message. This value should be 0 when no RC channels are available. + uint8_t rssi; ///< Receive signal strength indicator, 0: 0%, 100: 100%, 255: invalid/unknown. +} mavlink_rc_channels_t; + +#define MAVLINK_MSG_ID_RC_CHANNELS_LEN 42 +#define MAVLINK_MSG_ID_65_LEN 42 + +#define MAVLINK_MSG_ID_RC_CHANNELS_CRC 118 +#define MAVLINK_MSG_ID_65_CRC 118 + + + +#define MAVLINK_MESSAGE_INFO_RC_CHANNELS { \ + "RC_CHANNELS", \ + 21, \ + { { "time_boot_ms", NULL, MAVLINK_TYPE_UINT32_T, 0, 0, offsetof(mavlink_rc_channels_t, time_boot_ms) }, \ + { "chan1_raw", NULL, MAVLINK_TYPE_UINT16_T, 0, 4, offsetof(mavlink_rc_channels_t, chan1_raw) }, \ + { "chan2_raw", NULL, MAVLINK_TYPE_UINT16_T, 0, 6, offsetof(mavlink_rc_channels_t, chan2_raw) }, \ + { "chan3_raw", NULL, MAVLINK_TYPE_UINT16_T, 0, 8, offsetof(mavlink_rc_channels_t, chan3_raw) }, \ + { "chan4_raw", NULL, MAVLINK_TYPE_UINT16_T, 0, 10, offsetof(mavlink_rc_channels_t, chan4_raw) }, \ + { "chan5_raw", NULL, MAVLINK_TYPE_UINT16_T, 0, 12, offsetof(mavlink_rc_channels_t, chan5_raw) }, \ + { "chan6_raw", NULL, MAVLINK_TYPE_UINT16_T, 0, 14, offsetof(mavlink_rc_channels_t, chan6_raw) }, \ + { "chan7_raw", NULL, MAVLINK_TYPE_UINT16_T, 0, 16, offsetof(mavlink_rc_channels_t, chan7_raw) }, \ + { "chan8_raw", NULL, MAVLINK_TYPE_UINT16_T, 0, 18, offsetof(mavlink_rc_channels_t, chan8_raw) }, \ + { "chan9_raw", NULL, MAVLINK_TYPE_UINT16_T, 0, 20, offsetof(mavlink_rc_channels_t, chan9_raw) }, \ + { "chan10_raw", NULL, MAVLINK_TYPE_UINT16_T, 0, 22, offsetof(mavlink_rc_channels_t, chan10_raw) }, \ + { "chan11_raw", NULL, MAVLINK_TYPE_UINT16_T, 0, 24, offsetof(mavlink_rc_channels_t, chan11_raw) }, \ + { "chan12_raw", NULL, MAVLINK_TYPE_UINT16_T, 0, 26, offsetof(mavlink_rc_channels_t, chan12_raw) }, \ + { "chan13_raw", NULL, MAVLINK_TYPE_UINT16_T, 0, 28, offsetof(mavlink_rc_channels_t, chan13_raw) }, \ + { "chan14_raw", NULL, MAVLINK_TYPE_UINT16_T, 0, 30, offsetof(mavlink_rc_channels_t, chan14_raw) }, \ + { "chan15_raw", NULL, MAVLINK_TYPE_UINT16_T, 0, 32, offsetof(mavlink_rc_channels_t, chan15_raw) }, \ + { "chan16_raw", NULL, MAVLINK_TYPE_UINT16_T, 0, 34, offsetof(mavlink_rc_channels_t, chan16_raw) }, \ + { "chan17_raw", NULL, MAVLINK_TYPE_UINT16_T, 0, 36, offsetof(mavlink_rc_channels_t, chan17_raw) }, \ + { "chan18_raw", NULL, MAVLINK_TYPE_UINT16_T, 0, 38, offsetof(mavlink_rc_channels_t, chan18_raw) }, \ + { "chancount", NULL, MAVLINK_TYPE_UINT8_T, 0, 40, offsetof(mavlink_rc_channels_t, chancount) }, \ + { "rssi", NULL, MAVLINK_TYPE_UINT8_T, 0, 41, offsetof(mavlink_rc_channels_t, rssi) }, \ + } \ +} + + +/** + * @brief Pack a rc_channels message + * @param system_id ID of this system + * @param component_id ID of this component (e.g. 200 for IMU) + * @param msg The MAVLink message to compress the data into + * + * @param time_boot_ms Timestamp (milliseconds since system boot) + * @param chancount Total number of RC channels being received. This can be larger than 18, indicating that more channels are available but not given in this message. This value should be 0 when no RC channels are available. + * @param chan1_raw RC channel 1 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan2_raw RC channel 2 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan3_raw RC channel 3 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan4_raw RC channel 4 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan5_raw RC channel 5 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan6_raw RC channel 6 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan7_raw RC channel 7 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan8_raw RC channel 8 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan9_raw RC channel 9 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan10_raw RC channel 10 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan11_raw RC channel 11 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan12_raw RC channel 12 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan13_raw RC channel 13 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan14_raw RC channel 14 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan15_raw RC channel 15 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan16_raw RC channel 16 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan17_raw RC channel 17 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan18_raw RC channel 18 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param rssi Receive signal strength indicator, 0: 0%, 100: 100%, 255: invalid/unknown. + * @return length of the message in bytes (excluding serial stream start sign) + */ +static inline uint16_t mavlink_msg_rc_channels_pack(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, + uint32_t time_boot_ms, uint8_t chancount, uint16_t chan1_raw, uint16_t chan2_raw, uint16_t chan3_raw, uint16_t chan4_raw, uint16_t chan5_raw, uint16_t chan6_raw, uint16_t chan7_raw, uint16_t chan8_raw, uint16_t chan9_raw, uint16_t chan10_raw, uint16_t chan11_raw, uint16_t chan12_raw, uint16_t chan13_raw, uint16_t chan14_raw, uint16_t chan15_raw, uint16_t chan16_raw, uint16_t chan17_raw, uint16_t chan18_raw, uint8_t rssi) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char buf[MAVLINK_MSG_ID_RC_CHANNELS_LEN]; + _mav_put_uint32_t(buf, 0, time_boot_ms); + _mav_put_uint16_t(buf, 4, chan1_raw); + _mav_put_uint16_t(buf, 6, chan2_raw); + _mav_put_uint16_t(buf, 8, chan3_raw); + _mav_put_uint16_t(buf, 10, chan4_raw); + _mav_put_uint16_t(buf, 12, chan5_raw); + _mav_put_uint16_t(buf, 14, chan6_raw); + _mav_put_uint16_t(buf, 16, chan7_raw); + _mav_put_uint16_t(buf, 18, chan8_raw); + _mav_put_uint16_t(buf, 20, chan9_raw); + _mav_put_uint16_t(buf, 22, chan10_raw); + _mav_put_uint16_t(buf, 24, chan11_raw); + _mav_put_uint16_t(buf, 26, chan12_raw); + _mav_put_uint16_t(buf, 28, chan13_raw); + _mav_put_uint16_t(buf, 30, chan14_raw); + _mav_put_uint16_t(buf, 32, chan15_raw); + _mav_put_uint16_t(buf, 34, chan16_raw); + _mav_put_uint16_t(buf, 36, chan17_raw); + _mav_put_uint16_t(buf, 38, chan18_raw); + _mav_put_uint8_t(buf, 40, chancount); + _mav_put_uint8_t(buf, 41, rssi); + + memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, MAVLINK_MSG_ID_RC_CHANNELS_LEN); +#else + mavlink_rc_channels_t packet; + packet.time_boot_ms = time_boot_ms; + packet.chan1_raw = chan1_raw; + packet.chan2_raw = chan2_raw; + packet.chan3_raw = chan3_raw; + packet.chan4_raw = chan4_raw; + packet.chan5_raw = chan5_raw; + packet.chan6_raw = chan6_raw; + packet.chan7_raw = chan7_raw; + packet.chan8_raw = chan8_raw; + packet.chan9_raw = chan9_raw; + packet.chan10_raw = chan10_raw; + packet.chan11_raw = chan11_raw; + packet.chan12_raw = chan12_raw; + packet.chan13_raw = chan13_raw; + packet.chan14_raw = chan14_raw; + packet.chan15_raw = chan15_raw; + packet.chan16_raw = chan16_raw; + packet.chan17_raw = chan17_raw; + packet.chan18_raw = chan18_raw; + packet.chancount = chancount; + packet.rssi = rssi; + + memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, MAVLINK_MSG_ID_RC_CHANNELS_LEN); +#endif + + msg->msgid = MAVLINK_MSG_ID_RC_CHANNELS; +#if MAVLINK_CRC_EXTRA + return mavlink_finalize_message(msg, system_id, component_id, MAVLINK_MSG_ID_RC_CHANNELS_LEN, MAVLINK_MSG_ID_RC_CHANNELS_CRC); +#else + return mavlink_finalize_message(msg, system_id, component_id, MAVLINK_MSG_ID_RC_CHANNELS_LEN); +#endif +} + +/** + * @brief Pack a rc_channels message on a channel + * @param system_id ID of this system + * @param component_id ID of this component (e.g. 200 for IMU) + * @param chan The MAVLink channel this message will be sent over + * @param msg The MAVLink message to compress the data into + * @param time_boot_ms Timestamp (milliseconds since system boot) + * @param chancount Total number of RC channels being received. This can be larger than 18, indicating that more channels are available but not given in this message. This value should be 0 when no RC channels are available. + * @param chan1_raw RC channel 1 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan2_raw RC channel 2 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan3_raw RC channel 3 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan4_raw RC channel 4 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan5_raw RC channel 5 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan6_raw RC channel 6 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan7_raw RC channel 7 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan8_raw RC channel 8 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan9_raw RC channel 9 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan10_raw RC channel 10 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan11_raw RC channel 11 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan12_raw RC channel 12 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan13_raw RC channel 13 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan14_raw RC channel 14 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan15_raw RC channel 15 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan16_raw RC channel 16 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan17_raw RC channel 17 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan18_raw RC channel 18 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param rssi Receive signal strength indicator, 0: 0%, 100: 100%, 255: invalid/unknown. + * @return length of the message in bytes (excluding serial stream start sign) + */ +static inline uint16_t mavlink_msg_rc_channels_pack_chan(uint8_t system_id, uint8_t component_id, uint8_t chan, + mavlink_message_t* msg, + uint32_t time_boot_ms,uint8_t chancount,uint16_t chan1_raw,uint16_t chan2_raw,uint16_t chan3_raw,uint16_t chan4_raw,uint16_t chan5_raw,uint16_t chan6_raw,uint16_t chan7_raw,uint16_t chan8_raw,uint16_t chan9_raw,uint16_t chan10_raw,uint16_t chan11_raw,uint16_t chan12_raw,uint16_t chan13_raw,uint16_t chan14_raw,uint16_t chan15_raw,uint16_t chan16_raw,uint16_t chan17_raw,uint16_t chan18_raw,uint8_t rssi) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char buf[MAVLINK_MSG_ID_RC_CHANNELS_LEN]; + _mav_put_uint32_t(buf, 0, time_boot_ms); + _mav_put_uint16_t(buf, 4, chan1_raw); + _mav_put_uint16_t(buf, 6, chan2_raw); + _mav_put_uint16_t(buf, 8, chan3_raw); + _mav_put_uint16_t(buf, 10, chan4_raw); + _mav_put_uint16_t(buf, 12, chan5_raw); + _mav_put_uint16_t(buf, 14, chan6_raw); + _mav_put_uint16_t(buf, 16, chan7_raw); + _mav_put_uint16_t(buf, 18, chan8_raw); + _mav_put_uint16_t(buf, 20, chan9_raw); + _mav_put_uint16_t(buf, 22, chan10_raw); + _mav_put_uint16_t(buf, 24, chan11_raw); + _mav_put_uint16_t(buf, 26, chan12_raw); + _mav_put_uint16_t(buf, 28, chan13_raw); + _mav_put_uint16_t(buf, 30, chan14_raw); + _mav_put_uint16_t(buf, 32, chan15_raw); + _mav_put_uint16_t(buf, 34, chan16_raw); + _mav_put_uint16_t(buf, 36, chan17_raw); + _mav_put_uint16_t(buf, 38, chan18_raw); + _mav_put_uint8_t(buf, 40, chancount); + _mav_put_uint8_t(buf, 41, rssi); + + memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, MAVLINK_MSG_ID_RC_CHANNELS_LEN); +#else + mavlink_rc_channels_t packet; + packet.time_boot_ms = time_boot_ms; + packet.chan1_raw = chan1_raw; + packet.chan2_raw = chan2_raw; + packet.chan3_raw = chan3_raw; + packet.chan4_raw = chan4_raw; + packet.chan5_raw = chan5_raw; + packet.chan6_raw = chan6_raw; + packet.chan7_raw = chan7_raw; + packet.chan8_raw = chan8_raw; + packet.chan9_raw = chan9_raw; + packet.chan10_raw = chan10_raw; + packet.chan11_raw = chan11_raw; + packet.chan12_raw = chan12_raw; + packet.chan13_raw = chan13_raw; + packet.chan14_raw = chan14_raw; + packet.chan15_raw = chan15_raw; + packet.chan16_raw = chan16_raw; + packet.chan17_raw = chan17_raw; + packet.chan18_raw = chan18_raw; + packet.chancount = chancount; + packet.rssi = rssi; + + memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, MAVLINK_MSG_ID_RC_CHANNELS_LEN); +#endif + + msg->msgid = MAVLINK_MSG_ID_RC_CHANNELS; +#if MAVLINK_CRC_EXTRA + return mavlink_finalize_message_chan(msg, system_id, component_id, chan, MAVLINK_MSG_ID_RC_CHANNELS_LEN, MAVLINK_MSG_ID_RC_CHANNELS_CRC); +#else + return mavlink_finalize_message_chan(msg, system_id, component_id, chan, MAVLINK_MSG_ID_RC_CHANNELS_LEN); +#endif +} + +/** + * @brief Encode a rc_channels struct + * + * @param system_id ID of this system + * @param component_id ID of this component (e.g. 200 for IMU) + * @param msg The MAVLink message to compress the data into + * @param rc_channels C-struct to read the message contents from + */ +static inline uint16_t mavlink_msg_rc_channels_encode(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, const mavlink_rc_channels_t* rc_channels) +{ + return mavlink_msg_rc_channels_pack(system_id, component_id, msg, rc_channels->time_boot_ms, rc_channels->chancount, rc_channels->chan1_raw, rc_channels->chan2_raw, rc_channels->chan3_raw, rc_channels->chan4_raw, rc_channels->chan5_raw, rc_channels->chan6_raw, rc_channels->chan7_raw, rc_channels->chan8_raw, rc_channels->chan9_raw, rc_channels->chan10_raw, rc_channels->chan11_raw, rc_channels->chan12_raw, rc_channels->chan13_raw, rc_channels->chan14_raw, rc_channels->chan15_raw, rc_channels->chan16_raw, rc_channels->chan17_raw, rc_channels->chan18_raw, rc_channels->rssi); +} + +/** + * @brief Encode a rc_channels struct on a channel + * + * @param system_id ID of this system + * @param component_id ID of this component (e.g. 200 for IMU) + * @param chan The MAVLink channel this message will be sent over + * @param msg The MAVLink message to compress the data into + * @param rc_channels C-struct to read the message contents from + */ +static inline uint16_t mavlink_msg_rc_channels_encode_chan(uint8_t system_id, uint8_t component_id, uint8_t chan, mavlink_message_t* msg, const mavlink_rc_channels_t* rc_channels) +{ + return mavlink_msg_rc_channels_pack_chan(system_id, component_id, chan, msg, rc_channels->time_boot_ms, rc_channels->chancount, rc_channels->chan1_raw, rc_channels->chan2_raw, rc_channels->chan3_raw, rc_channels->chan4_raw, rc_channels->chan5_raw, rc_channels->chan6_raw, rc_channels->chan7_raw, rc_channels->chan8_raw, rc_channels->chan9_raw, rc_channels->chan10_raw, rc_channels->chan11_raw, rc_channels->chan12_raw, rc_channels->chan13_raw, rc_channels->chan14_raw, rc_channels->chan15_raw, rc_channels->chan16_raw, rc_channels->chan17_raw, rc_channels->chan18_raw, rc_channels->rssi); +} + +/** + * @brief Send a rc_channels message + * @param chan MAVLink channel to send the message + * + * @param time_boot_ms Timestamp (milliseconds since system boot) + * @param chancount Total number of RC channels being received. This can be larger than 18, indicating that more channels are available but not given in this message. This value should be 0 when no RC channels are available. + * @param chan1_raw RC channel 1 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan2_raw RC channel 2 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan3_raw RC channel 3 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan4_raw RC channel 4 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan5_raw RC channel 5 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan6_raw RC channel 6 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan7_raw RC channel 7 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan8_raw RC channel 8 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan9_raw RC channel 9 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan10_raw RC channel 10 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan11_raw RC channel 11 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan12_raw RC channel 12 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan13_raw RC channel 13 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan14_raw RC channel 14 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan15_raw RC channel 15 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan16_raw RC channel 16 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan17_raw RC channel 17 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param chan18_raw RC channel 18 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + * @param rssi Receive signal strength indicator, 0: 0%, 100: 100%, 255: invalid/unknown. + */ +#ifdef MAVLINK_USE_CONVENIENCE_FUNCTIONS + +static inline void mavlink_msg_rc_channels_send(mavlink_channel_t chan, uint32_t time_boot_ms, uint8_t chancount, uint16_t chan1_raw, uint16_t chan2_raw, uint16_t chan3_raw, uint16_t chan4_raw, uint16_t chan5_raw, uint16_t chan6_raw, uint16_t chan7_raw, uint16_t chan8_raw, uint16_t chan9_raw, uint16_t chan10_raw, uint16_t chan11_raw, uint16_t chan12_raw, uint16_t chan13_raw, uint16_t chan14_raw, uint16_t chan15_raw, uint16_t chan16_raw, uint16_t chan17_raw, uint16_t chan18_raw, uint8_t rssi) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char buf[MAVLINK_MSG_ID_RC_CHANNELS_LEN]; + _mav_put_uint32_t(buf, 0, time_boot_ms); + _mav_put_uint16_t(buf, 4, chan1_raw); + _mav_put_uint16_t(buf, 6, chan2_raw); + _mav_put_uint16_t(buf, 8, chan3_raw); + _mav_put_uint16_t(buf, 10, chan4_raw); + _mav_put_uint16_t(buf, 12, chan5_raw); + _mav_put_uint16_t(buf, 14, chan6_raw); + _mav_put_uint16_t(buf, 16, chan7_raw); + _mav_put_uint16_t(buf, 18, chan8_raw); + _mav_put_uint16_t(buf, 20, chan9_raw); + _mav_put_uint16_t(buf, 22, chan10_raw); + _mav_put_uint16_t(buf, 24, chan11_raw); + _mav_put_uint16_t(buf, 26, chan12_raw); + _mav_put_uint16_t(buf, 28, chan13_raw); + _mav_put_uint16_t(buf, 30, chan14_raw); + _mav_put_uint16_t(buf, 32, chan15_raw); + _mav_put_uint16_t(buf, 34, chan16_raw); + _mav_put_uint16_t(buf, 36, chan17_raw); + _mav_put_uint16_t(buf, 38, chan18_raw); + _mav_put_uint8_t(buf, 40, chancount); + _mav_put_uint8_t(buf, 41, rssi); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RC_CHANNELS, buf, MAVLINK_MSG_ID_RC_CHANNELS_LEN, MAVLINK_MSG_ID_RC_CHANNELS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RC_CHANNELS, buf, MAVLINK_MSG_ID_RC_CHANNELS_LEN); +#endif +#else + mavlink_rc_channels_t packet; + packet.time_boot_ms = time_boot_ms; + packet.chan1_raw = chan1_raw; + packet.chan2_raw = chan2_raw; + packet.chan3_raw = chan3_raw; + packet.chan4_raw = chan4_raw; + packet.chan5_raw = chan5_raw; + packet.chan6_raw = chan6_raw; + packet.chan7_raw = chan7_raw; + packet.chan8_raw = chan8_raw; + packet.chan9_raw = chan9_raw; + packet.chan10_raw = chan10_raw; + packet.chan11_raw = chan11_raw; + packet.chan12_raw = chan12_raw; + packet.chan13_raw = chan13_raw; + packet.chan14_raw = chan14_raw; + packet.chan15_raw = chan15_raw; + packet.chan16_raw = chan16_raw; + packet.chan17_raw = chan17_raw; + packet.chan18_raw = chan18_raw; + packet.chancount = chancount; + packet.rssi = rssi; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RC_CHANNELS, (const char *)&packet, MAVLINK_MSG_ID_RC_CHANNELS_LEN, MAVLINK_MSG_ID_RC_CHANNELS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RC_CHANNELS, (const char *)&packet, MAVLINK_MSG_ID_RC_CHANNELS_LEN); +#endif +#endif +} + +#if MAVLINK_MSG_ID_RC_CHANNELS_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_rc_channels_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint32_t time_boot_ms, uint8_t chancount, uint16_t chan1_raw, uint16_t chan2_raw, uint16_t chan3_raw, uint16_t chan4_raw, uint16_t chan5_raw, uint16_t chan6_raw, uint16_t chan7_raw, uint16_t chan8_raw, uint16_t chan9_raw, uint16_t chan10_raw, uint16_t chan11_raw, uint16_t chan12_raw, uint16_t chan13_raw, uint16_t chan14_raw, uint16_t chan15_raw, uint16_t chan16_raw, uint16_t chan17_raw, uint16_t chan18_raw, uint8_t rssi) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, time_boot_ms); + _mav_put_uint16_t(buf, 4, chan1_raw); + _mav_put_uint16_t(buf, 6, chan2_raw); + _mav_put_uint16_t(buf, 8, chan3_raw); + _mav_put_uint16_t(buf, 10, chan4_raw); + _mav_put_uint16_t(buf, 12, chan5_raw); + _mav_put_uint16_t(buf, 14, chan6_raw); + _mav_put_uint16_t(buf, 16, chan7_raw); + _mav_put_uint16_t(buf, 18, chan8_raw); + _mav_put_uint16_t(buf, 20, chan9_raw); + _mav_put_uint16_t(buf, 22, chan10_raw); + _mav_put_uint16_t(buf, 24, chan11_raw); + _mav_put_uint16_t(buf, 26, chan12_raw); + _mav_put_uint16_t(buf, 28, chan13_raw); + _mav_put_uint16_t(buf, 30, chan14_raw); + _mav_put_uint16_t(buf, 32, chan15_raw); + _mav_put_uint16_t(buf, 34, chan16_raw); + _mav_put_uint16_t(buf, 36, chan17_raw); + _mav_put_uint16_t(buf, 38, chan18_raw); + _mav_put_uint8_t(buf, 40, chancount); + _mav_put_uint8_t(buf, 41, rssi); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RC_CHANNELS, buf, MAVLINK_MSG_ID_RC_CHANNELS_LEN, MAVLINK_MSG_ID_RC_CHANNELS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RC_CHANNELS, buf, MAVLINK_MSG_ID_RC_CHANNELS_LEN); +#endif +#else + mavlink_rc_channels_t *packet = (mavlink_rc_channels_t *)msgbuf; + packet->time_boot_ms = time_boot_ms; + packet->chan1_raw = chan1_raw; + packet->chan2_raw = chan2_raw; + packet->chan3_raw = chan3_raw; + packet->chan4_raw = chan4_raw; + packet->chan5_raw = chan5_raw; + packet->chan6_raw = chan6_raw; + packet->chan7_raw = chan7_raw; + packet->chan8_raw = chan8_raw; + packet->chan9_raw = chan9_raw; + packet->chan10_raw = chan10_raw; + packet->chan11_raw = chan11_raw; + packet->chan12_raw = chan12_raw; + packet->chan13_raw = chan13_raw; + packet->chan14_raw = chan14_raw; + packet->chan15_raw = chan15_raw; + packet->chan16_raw = chan16_raw; + packet->chan17_raw = chan17_raw; + packet->chan18_raw = chan18_raw; + packet->chancount = chancount; + packet->rssi = rssi; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RC_CHANNELS, (const char *)packet, MAVLINK_MSG_ID_RC_CHANNELS_LEN, MAVLINK_MSG_ID_RC_CHANNELS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RC_CHANNELS, (const char *)packet, MAVLINK_MSG_ID_RC_CHANNELS_LEN); +#endif +#endif +} +#endif + +#endif + +// MESSAGE RC_CHANNELS UNPACKING + + +/** + * @brief Get field time_boot_ms from rc_channels message + * + * @return Timestamp (milliseconds since system boot) + */ +static inline uint32_t mavlink_msg_rc_channels_get_time_boot_ms(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint32_t(msg, 0); +} + +/** + * @brief Get field chancount from rc_channels message + * + * @return Total number of RC channels being received. This can be larger than 18, indicating that more channels are available but not given in this message. This value should be 0 when no RC channels are available. + */ +static inline uint8_t mavlink_msg_rc_channels_get_chancount(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint8_t(msg, 40); +} + +/** + * @brief Get field chan1_raw from rc_channels message + * + * @return RC channel 1 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + */ +static inline uint16_t mavlink_msg_rc_channels_get_chan1_raw(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint16_t(msg, 4); +} + +/** + * @brief Get field chan2_raw from rc_channels message + * + * @return RC channel 2 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + */ +static inline uint16_t mavlink_msg_rc_channels_get_chan2_raw(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint16_t(msg, 6); +} + +/** + * @brief Get field chan3_raw from rc_channels message + * + * @return RC channel 3 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + */ +static inline uint16_t mavlink_msg_rc_channels_get_chan3_raw(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint16_t(msg, 8); +} + +/** + * @brief Get field chan4_raw from rc_channels message + * + * @return RC channel 4 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + */ +static inline uint16_t mavlink_msg_rc_channels_get_chan4_raw(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint16_t(msg, 10); +} + +/** + * @brief Get field chan5_raw from rc_channels message + * + * @return RC channel 5 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + */ +static inline uint16_t mavlink_msg_rc_channels_get_chan5_raw(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint16_t(msg, 12); +} + +/** + * @brief Get field chan6_raw from rc_channels message + * + * @return RC channel 6 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + */ +static inline uint16_t mavlink_msg_rc_channels_get_chan6_raw(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint16_t(msg, 14); +} + +/** + * @brief Get field chan7_raw from rc_channels message + * + * @return RC channel 7 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + */ +static inline uint16_t mavlink_msg_rc_channels_get_chan7_raw(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint16_t(msg, 16); +} + +/** + * @brief Get field chan8_raw from rc_channels message + * + * @return RC channel 8 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + */ +static inline uint16_t mavlink_msg_rc_channels_get_chan8_raw(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint16_t(msg, 18); +} + +/** + * @brief Get field chan9_raw from rc_channels message + * + * @return RC channel 9 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + */ +static inline uint16_t mavlink_msg_rc_channels_get_chan9_raw(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint16_t(msg, 20); +} + +/** + * @brief Get field chan10_raw from rc_channels message + * + * @return RC channel 10 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + */ +static inline uint16_t mavlink_msg_rc_channels_get_chan10_raw(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint16_t(msg, 22); +} + +/** + * @brief Get field chan11_raw from rc_channels message + * + * @return RC channel 11 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + */ +static inline uint16_t mavlink_msg_rc_channels_get_chan11_raw(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint16_t(msg, 24); +} + +/** + * @brief Get field chan12_raw from rc_channels message + * + * @return RC channel 12 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + */ +static inline uint16_t mavlink_msg_rc_channels_get_chan12_raw(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint16_t(msg, 26); +} + +/** + * @brief Get field chan13_raw from rc_channels message + * + * @return RC channel 13 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + */ +static inline uint16_t mavlink_msg_rc_channels_get_chan13_raw(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint16_t(msg, 28); +} + +/** + * @brief Get field chan14_raw from rc_channels message + * + * @return RC channel 14 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + */ +static inline uint16_t mavlink_msg_rc_channels_get_chan14_raw(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint16_t(msg, 30); +} + +/** + * @brief Get field chan15_raw from rc_channels message + * + * @return RC channel 15 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + */ +static inline uint16_t mavlink_msg_rc_channels_get_chan15_raw(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint16_t(msg, 32); +} + +/** + * @brief Get field chan16_raw from rc_channels message + * + * @return RC channel 16 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + */ +static inline uint16_t mavlink_msg_rc_channels_get_chan16_raw(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint16_t(msg, 34); +} + +/** + * @brief Get field chan17_raw from rc_channels message + * + * @return RC channel 17 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + */ +static inline uint16_t mavlink_msg_rc_channels_get_chan17_raw(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint16_t(msg, 36); +} + +/** + * @brief Get field chan18_raw from rc_channels message + * + * @return RC channel 18 value, in microseconds. A value of UINT16_MAX implies the channel is unused. + */ +static inline uint16_t mavlink_msg_rc_channels_get_chan18_raw(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint16_t(msg, 38); +} + +/** + * @brief Get field rssi from rc_channels message + * + * @return Receive signal strength indicator, 0: 0%, 100: 100%, 255: invalid/unknown. + */ +static inline uint8_t mavlink_msg_rc_channels_get_rssi(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint8_t(msg, 41); +} + +/** + * @brief Decode a rc_channels message into a struct + * + * @param msg The message to decode + * @param rc_channels C-struct to decode the message contents into + */ +static inline void mavlink_msg_rc_channels_decode(const mavlink_message_t* msg, mavlink_rc_channels_t* rc_channels) +{ +#if MAVLINK_NEED_BYTE_SWAP + rc_channels->time_boot_ms = mavlink_msg_rc_channels_get_time_boot_ms(msg); + rc_channels->chan1_raw = mavlink_msg_rc_channels_get_chan1_raw(msg); + rc_channels->chan2_raw = mavlink_msg_rc_channels_get_chan2_raw(msg); + rc_channels->chan3_raw = mavlink_msg_rc_channels_get_chan3_raw(msg); + rc_channels->chan4_raw = mavlink_msg_rc_channels_get_chan4_raw(msg); + rc_channels->chan5_raw = mavlink_msg_rc_channels_get_chan5_raw(msg); + rc_channels->chan6_raw = mavlink_msg_rc_channels_get_chan6_raw(msg); + rc_channels->chan7_raw = mavlink_msg_rc_channels_get_chan7_raw(msg); + rc_channels->chan8_raw = mavlink_msg_rc_channels_get_chan8_raw(msg); + rc_channels->chan9_raw = mavlink_msg_rc_channels_get_chan9_raw(msg); + rc_channels->chan10_raw = mavlink_msg_rc_channels_get_chan10_raw(msg); + rc_channels->chan11_raw = mavlink_msg_rc_channels_get_chan11_raw(msg); + rc_channels->chan12_raw = mavlink_msg_rc_channels_get_chan12_raw(msg); + rc_channels->chan13_raw = mavlink_msg_rc_channels_get_chan13_raw(msg); + rc_channels->chan14_raw = mavlink_msg_rc_channels_get_chan14_raw(msg); + rc_channels->chan15_raw = mavlink_msg_rc_channels_get_chan15_raw(msg); + rc_channels->chan16_raw = mavlink_msg_rc_channels_get_chan16_raw(msg); + rc_channels->chan17_raw = mavlink_msg_rc_channels_get_chan17_raw(msg); + rc_channels->chan18_raw = mavlink_msg_rc_channels_get_chan18_raw(msg); + rc_channels->chancount = mavlink_msg_rc_channels_get_chancount(msg); + rc_channels->rssi = mavlink_msg_rc_channels_get_rssi(msg); +#else + memcpy(rc_channels, _MAV_PAYLOAD(msg), MAVLINK_MSG_ID_RC_CHANNELS_LEN); +#endif +} diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_rc_channels_override.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_rc_channels_override.h index 0d8a1514b..15d4c6f95 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_rc_channels_override.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_rc_channels_override.h @@ -245,6 +245,56 @@ static inline void mavlink_msg_rc_channels_override_send(mavlink_channel_t chan, #endif } +#if MAVLINK_MSG_ID_RC_CHANNELS_OVERRIDE_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_rc_channels_override_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, uint16_t chan1_raw, uint16_t chan2_raw, uint16_t chan3_raw, uint16_t chan4_raw, uint16_t chan5_raw, uint16_t chan6_raw, uint16_t chan7_raw, uint16_t chan8_raw) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint16_t(buf, 0, chan1_raw); + _mav_put_uint16_t(buf, 2, chan2_raw); + _mav_put_uint16_t(buf, 4, chan3_raw); + _mav_put_uint16_t(buf, 6, chan4_raw); + _mav_put_uint16_t(buf, 8, chan5_raw); + _mav_put_uint16_t(buf, 10, chan6_raw); + _mav_put_uint16_t(buf, 12, chan7_raw); + _mav_put_uint16_t(buf, 14, chan8_raw); + _mav_put_uint8_t(buf, 16, target_system); + _mav_put_uint8_t(buf, 17, target_component); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RC_CHANNELS_OVERRIDE, buf, MAVLINK_MSG_ID_RC_CHANNELS_OVERRIDE_LEN, MAVLINK_MSG_ID_RC_CHANNELS_OVERRIDE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RC_CHANNELS_OVERRIDE, buf, MAVLINK_MSG_ID_RC_CHANNELS_OVERRIDE_LEN); +#endif +#else + mavlink_rc_channels_override_t *packet = (mavlink_rc_channels_override_t *)msgbuf; + packet->chan1_raw = chan1_raw; + packet->chan2_raw = chan2_raw; + packet->chan3_raw = chan3_raw; + packet->chan4_raw = chan4_raw; + packet->chan5_raw = chan5_raw; + packet->chan6_raw = chan6_raw; + packet->chan7_raw = chan7_raw; + packet->chan8_raw = chan8_raw; + packet->target_system = target_system; + packet->target_component = target_component; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RC_CHANNELS_OVERRIDE, (const char *)packet, MAVLINK_MSG_ID_RC_CHANNELS_OVERRIDE_LEN, MAVLINK_MSG_ID_RC_CHANNELS_OVERRIDE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RC_CHANNELS_OVERRIDE, (const char *)packet, MAVLINK_MSG_ID_RC_CHANNELS_OVERRIDE_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE RC_CHANNELS_OVERRIDE UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_rc_channels_raw.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_rc_channels_raw.h index 3c0aed020..d75a5934a 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_rc_channels_raw.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_rc_channels_raw.h @@ -256,6 +256,58 @@ static inline void mavlink_msg_rc_channels_raw_send(mavlink_channel_t chan, uint #endif } +#if MAVLINK_MSG_ID_RC_CHANNELS_RAW_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_rc_channels_raw_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint32_t time_boot_ms, uint8_t port, uint16_t chan1_raw, uint16_t chan2_raw, uint16_t chan3_raw, uint16_t chan4_raw, uint16_t chan5_raw, uint16_t chan6_raw, uint16_t chan7_raw, uint16_t chan8_raw, uint8_t rssi) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, time_boot_ms); + _mav_put_uint16_t(buf, 4, chan1_raw); + _mav_put_uint16_t(buf, 6, chan2_raw); + _mav_put_uint16_t(buf, 8, chan3_raw); + _mav_put_uint16_t(buf, 10, chan4_raw); + _mav_put_uint16_t(buf, 12, chan5_raw); + _mav_put_uint16_t(buf, 14, chan6_raw); + _mav_put_uint16_t(buf, 16, chan7_raw); + _mav_put_uint16_t(buf, 18, chan8_raw); + _mav_put_uint8_t(buf, 20, port); + _mav_put_uint8_t(buf, 21, rssi); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RC_CHANNELS_RAW, buf, MAVLINK_MSG_ID_RC_CHANNELS_RAW_LEN, MAVLINK_MSG_ID_RC_CHANNELS_RAW_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RC_CHANNELS_RAW, buf, MAVLINK_MSG_ID_RC_CHANNELS_RAW_LEN); +#endif +#else + mavlink_rc_channels_raw_t *packet = (mavlink_rc_channels_raw_t *)msgbuf; + packet->time_boot_ms = time_boot_ms; + packet->chan1_raw = chan1_raw; + packet->chan2_raw = chan2_raw; + packet->chan3_raw = chan3_raw; + packet->chan4_raw = chan4_raw; + packet->chan5_raw = chan5_raw; + packet->chan6_raw = chan6_raw; + packet->chan7_raw = chan7_raw; + packet->chan8_raw = chan8_raw; + packet->port = port; + packet->rssi = rssi; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RC_CHANNELS_RAW, (const char *)packet, MAVLINK_MSG_ID_RC_CHANNELS_RAW_LEN, MAVLINK_MSG_ID_RC_CHANNELS_RAW_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RC_CHANNELS_RAW, (const char *)packet, MAVLINK_MSG_ID_RC_CHANNELS_RAW_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE RC_CHANNELS_RAW UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_rc_channels_scaled.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_rc_channels_scaled.h index 2153ab392..f400f987d 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_rc_channels_scaled.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_rc_channels_scaled.h @@ -256,6 +256,58 @@ static inline void mavlink_msg_rc_channels_scaled_send(mavlink_channel_t chan, u #endif } +#if MAVLINK_MSG_ID_RC_CHANNELS_SCALED_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_rc_channels_scaled_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint32_t time_boot_ms, uint8_t port, int16_t chan1_scaled, int16_t chan2_scaled, int16_t chan3_scaled, int16_t chan4_scaled, int16_t chan5_scaled, int16_t chan6_scaled, int16_t chan7_scaled, int16_t chan8_scaled, uint8_t rssi) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, time_boot_ms); + _mav_put_int16_t(buf, 4, chan1_scaled); + _mav_put_int16_t(buf, 6, chan2_scaled); + _mav_put_int16_t(buf, 8, chan3_scaled); + _mav_put_int16_t(buf, 10, chan4_scaled); + _mav_put_int16_t(buf, 12, chan5_scaled); + _mav_put_int16_t(buf, 14, chan6_scaled); + _mav_put_int16_t(buf, 16, chan7_scaled); + _mav_put_int16_t(buf, 18, chan8_scaled); + _mav_put_uint8_t(buf, 20, port); + _mav_put_uint8_t(buf, 21, rssi); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RC_CHANNELS_SCALED, buf, MAVLINK_MSG_ID_RC_CHANNELS_SCALED_LEN, MAVLINK_MSG_ID_RC_CHANNELS_SCALED_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RC_CHANNELS_SCALED, buf, MAVLINK_MSG_ID_RC_CHANNELS_SCALED_LEN); +#endif +#else + mavlink_rc_channels_scaled_t *packet = (mavlink_rc_channels_scaled_t *)msgbuf; + packet->time_boot_ms = time_boot_ms; + packet->chan1_scaled = chan1_scaled; + packet->chan2_scaled = chan2_scaled; + packet->chan3_scaled = chan3_scaled; + packet->chan4_scaled = chan4_scaled; + packet->chan5_scaled = chan5_scaled; + packet->chan6_scaled = chan6_scaled; + packet->chan7_scaled = chan7_scaled; + packet->chan8_scaled = chan8_scaled; + packet->port = port; + packet->rssi = rssi; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RC_CHANNELS_SCALED, (const char *)packet, MAVLINK_MSG_ID_RC_CHANNELS_SCALED_LEN, MAVLINK_MSG_ID_RC_CHANNELS_SCALED_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RC_CHANNELS_SCALED, (const char *)packet, MAVLINK_MSG_ID_RC_CHANNELS_SCALED_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE RC_CHANNELS_SCALED UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_request_data_stream.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_request_data_stream.h index c754ad876..2ebcc54da 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_request_data_stream.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_request_data_stream.h @@ -190,6 +190,46 @@ static inline void mavlink_msg_request_data_stream_send(mavlink_channel_t chan, #endif } +#if MAVLINK_MSG_ID_REQUEST_DATA_STREAM_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_request_data_stream_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, uint8_t req_stream_id, uint16_t req_message_rate, uint8_t start_stop) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint16_t(buf, 0, req_message_rate); + _mav_put_uint8_t(buf, 2, target_system); + _mav_put_uint8_t(buf, 3, target_component); + _mav_put_uint8_t(buf, 4, req_stream_id); + _mav_put_uint8_t(buf, 5, start_stop); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_REQUEST_DATA_STREAM, buf, MAVLINK_MSG_ID_REQUEST_DATA_STREAM_LEN, MAVLINK_MSG_ID_REQUEST_DATA_STREAM_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_REQUEST_DATA_STREAM, buf, MAVLINK_MSG_ID_REQUEST_DATA_STREAM_LEN); +#endif +#else + mavlink_request_data_stream_t *packet = (mavlink_request_data_stream_t *)msgbuf; + packet->req_message_rate = req_message_rate; + packet->target_system = target_system; + packet->target_component = target_component; + packet->req_stream_id = req_stream_id; + packet->start_stop = start_stop; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_REQUEST_DATA_STREAM, (const char *)packet, MAVLINK_MSG_ID_REQUEST_DATA_STREAM_LEN, MAVLINK_MSG_ID_REQUEST_DATA_STREAM_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_REQUEST_DATA_STREAM, (const char *)packet, MAVLINK_MSG_ID_REQUEST_DATA_STREAM_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE REQUEST_DATA_STREAM UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_roll_pitch_yaw_rates_thrust_setpoint.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_roll_pitch_yaw_rates_thrust_setpoint.h index ac3ef4fa9..131b756b6 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_roll_pitch_yaw_rates_thrust_setpoint.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_roll_pitch_yaw_rates_thrust_setpoint.h @@ -190,6 +190,46 @@ static inline void mavlink_msg_roll_pitch_yaw_rates_thrust_setpoint_send(mavlink #endif } +#if MAVLINK_MSG_ID_ROLL_PITCH_YAW_RATES_THRUST_SETPOINT_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_roll_pitch_yaw_rates_thrust_setpoint_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint32_t time_boot_ms, float roll_rate, float pitch_rate, float yaw_rate, float thrust) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, time_boot_ms); + _mav_put_float(buf, 4, roll_rate); + _mav_put_float(buf, 8, pitch_rate); + _mav_put_float(buf, 12, yaw_rate); + _mav_put_float(buf, 16, thrust); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ROLL_PITCH_YAW_RATES_THRUST_SETPOINT, buf, MAVLINK_MSG_ID_ROLL_PITCH_YAW_RATES_THRUST_SETPOINT_LEN, MAVLINK_MSG_ID_ROLL_PITCH_YAW_RATES_THRUST_SETPOINT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ROLL_PITCH_YAW_RATES_THRUST_SETPOINT, buf, MAVLINK_MSG_ID_ROLL_PITCH_YAW_RATES_THRUST_SETPOINT_LEN); +#endif +#else + mavlink_roll_pitch_yaw_rates_thrust_setpoint_t *packet = (mavlink_roll_pitch_yaw_rates_thrust_setpoint_t *)msgbuf; + packet->time_boot_ms = time_boot_ms; + packet->roll_rate = roll_rate; + packet->pitch_rate = pitch_rate; + packet->yaw_rate = yaw_rate; + packet->thrust = thrust; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ROLL_PITCH_YAW_RATES_THRUST_SETPOINT, (const char *)packet, MAVLINK_MSG_ID_ROLL_PITCH_YAW_RATES_THRUST_SETPOINT_LEN, MAVLINK_MSG_ID_ROLL_PITCH_YAW_RATES_THRUST_SETPOINT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ROLL_PITCH_YAW_RATES_THRUST_SETPOINT, (const char *)packet, MAVLINK_MSG_ID_ROLL_PITCH_YAW_RATES_THRUST_SETPOINT_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE ROLL_PITCH_YAW_RATES_THRUST_SETPOINT UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_roll_pitch_yaw_speed_thrust_setpoint.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_roll_pitch_yaw_speed_thrust_setpoint.h index 626477322..757e6d138 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_roll_pitch_yaw_speed_thrust_setpoint.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_roll_pitch_yaw_speed_thrust_setpoint.h @@ -190,6 +190,46 @@ static inline void mavlink_msg_roll_pitch_yaw_speed_thrust_setpoint_send(mavlink #endif } +#if MAVLINK_MSG_ID_ROLL_PITCH_YAW_SPEED_THRUST_SETPOINT_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_roll_pitch_yaw_speed_thrust_setpoint_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint32_t time_boot_ms, float roll_speed, float pitch_speed, float yaw_speed, float thrust) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, time_boot_ms); + _mav_put_float(buf, 4, roll_speed); + _mav_put_float(buf, 8, pitch_speed); + _mav_put_float(buf, 12, yaw_speed); + _mav_put_float(buf, 16, thrust); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ROLL_PITCH_YAW_SPEED_THRUST_SETPOINT, buf, MAVLINK_MSG_ID_ROLL_PITCH_YAW_SPEED_THRUST_SETPOINT_LEN, MAVLINK_MSG_ID_ROLL_PITCH_YAW_SPEED_THRUST_SETPOINT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ROLL_PITCH_YAW_SPEED_THRUST_SETPOINT, buf, MAVLINK_MSG_ID_ROLL_PITCH_YAW_SPEED_THRUST_SETPOINT_LEN); +#endif +#else + mavlink_roll_pitch_yaw_speed_thrust_setpoint_t *packet = (mavlink_roll_pitch_yaw_speed_thrust_setpoint_t *)msgbuf; + packet->time_boot_ms = time_boot_ms; + packet->roll_speed = roll_speed; + packet->pitch_speed = pitch_speed; + packet->yaw_speed = yaw_speed; + packet->thrust = thrust; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ROLL_PITCH_YAW_SPEED_THRUST_SETPOINT, (const char *)packet, MAVLINK_MSG_ID_ROLL_PITCH_YAW_SPEED_THRUST_SETPOINT_LEN, MAVLINK_MSG_ID_ROLL_PITCH_YAW_SPEED_THRUST_SETPOINT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ROLL_PITCH_YAW_SPEED_THRUST_SETPOINT, (const char *)packet, MAVLINK_MSG_ID_ROLL_PITCH_YAW_SPEED_THRUST_SETPOINT_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE ROLL_PITCH_YAW_SPEED_THRUST_SETPOINT UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_roll_pitch_yaw_thrust_setpoint.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_roll_pitch_yaw_thrust_setpoint.h index ffcdc547b..f04eedcb3 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_roll_pitch_yaw_thrust_setpoint.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_roll_pitch_yaw_thrust_setpoint.h @@ -190,6 +190,46 @@ static inline void mavlink_msg_roll_pitch_yaw_thrust_setpoint_send(mavlink_chann #endif } +#if MAVLINK_MSG_ID_ROLL_PITCH_YAW_THRUST_SETPOINT_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_roll_pitch_yaw_thrust_setpoint_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint32_t time_boot_ms, float roll, float pitch, float yaw, float thrust) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, time_boot_ms); + _mav_put_float(buf, 4, roll); + _mav_put_float(buf, 8, pitch); + _mav_put_float(buf, 12, yaw); + _mav_put_float(buf, 16, thrust); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ROLL_PITCH_YAW_THRUST_SETPOINT, buf, MAVLINK_MSG_ID_ROLL_PITCH_YAW_THRUST_SETPOINT_LEN, MAVLINK_MSG_ID_ROLL_PITCH_YAW_THRUST_SETPOINT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ROLL_PITCH_YAW_THRUST_SETPOINT, buf, MAVLINK_MSG_ID_ROLL_PITCH_YAW_THRUST_SETPOINT_LEN); +#endif +#else + mavlink_roll_pitch_yaw_thrust_setpoint_t *packet = (mavlink_roll_pitch_yaw_thrust_setpoint_t *)msgbuf; + packet->time_boot_ms = time_boot_ms; + packet->roll = roll; + packet->pitch = pitch; + packet->yaw = yaw; + packet->thrust = thrust; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ROLL_PITCH_YAW_THRUST_SETPOINT, (const char *)packet, MAVLINK_MSG_ID_ROLL_PITCH_YAW_THRUST_SETPOINT_LEN, MAVLINK_MSG_ID_ROLL_PITCH_YAW_THRUST_SETPOINT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ROLL_PITCH_YAW_THRUST_SETPOINT, (const char *)packet, MAVLINK_MSG_ID_ROLL_PITCH_YAW_THRUST_SETPOINT_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE ROLL_PITCH_YAW_THRUST_SETPOINT UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_safety_allowed_area.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_safety_allowed_area.h index fcd54cbb7..0176dfcc8 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_safety_allowed_area.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_safety_allowed_area.h @@ -212,6 +212,50 @@ static inline void mavlink_msg_safety_allowed_area_send(mavlink_channel_t chan, #endif } +#if MAVLINK_MSG_ID_SAFETY_ALLOWED_AREA_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_safety_allowed_area_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t frame, float p1x, float p1y, float p1z, float p2x, float p2y, float p2z) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, p1x); + _mav_put_float(buf, 4, p1y); + _mav_put_float(buf, 8, p1z); + _mav_put_float(buf, 12, p2x); + _mav_put_float(buf, 16, p2y); + _mav_put_float(buf, 20, p2z); + _mav_put_uint8_t(buf, 24, frame); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SAFETY_ALLOWED_AREA, buf, MAVLINK_MSG_ID_SAFETY_ALLOWED_AREA_LEN, MAVLINK_MSG_ID_SAFETY_ALLOWED_AREA_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SAFETY_ALLOWED_AREA, buf, MAVLINK_MSG_ID_SAFETY_ALLOWED_AREA_LEN); +#endif +#else + mavlink_safety_allowed_area_t *packet = (mavlink_safety_allowed_area_t *)msgbuf; + packet->p1x = p1x; + packet->p1y = p1y; + packet->p1z = p1z; + packet->p2x = p2x; + packet->p2y = p2y; + packet->p2z = p2z; + packet->frame = frame; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SAFETY_ALLOWED_AREA, (const char *)packet, MAVLINK_MSG_ID_SAFETY_ALLOWED_AREA_LEN, MAVLINK_MSG_ID_SAFETY_ALLOWED_AREA_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SAFETY_ALLOWED_AREA, (const char *)packet, MAVLINK_MSG_ID_SAFETY_ALLOWED_AREA_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SAFETY_ALLOWED_AREA UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_safety_set_allowed_area.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_safety_set_allowed_area.h index 61f6af155..dafbc260b 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_safety_set_allowed_area.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_safety_set_allowed_area.h @@ -234,6 +234,54 @@ static inline void mavlink_msg_safety_set_allowed_area_send(mavlink_channel_t ch #endif } +#if MAVLINK_MSG_ID_SAFETY_SET_ALLOWED_AREA_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_safety_set_allowed_area_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, uint8_t frame, float p1x, float p1y, float p1z, float p2x, float p2y, float p2z) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, p1x); + _mav_put_float(buf, 4, p1y); + _mav_put_float(buf, 8, p1z); + _mav_put_float(buf, 12, p2x); + _mav_put_float(buf, 16, p2y); + _mav_put_float(buf, 20, p2z); + _mav_put_uint8_t(buf, 24, target_system); + _mav_put_uint8_t(buf, 25, target_component); + _mav_put_uint8_t(buf, 26, frame); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SAFETY_SET_ALLOWED_AREA, buf, MAVLINK_MSG_ID_SAFETY_SET_ALLOWED_AREA_LEN, MAVLINK_MSG_ID_SAFETY_SET_ALLOWED_AREA_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SAFETY_SET_ALLOWED_AREA, buf, MAVLINK_MSG_ID_SAFETY_SET_ALLOWED_AREA_LEN); +#endif +#else + mavlink_safety_set_allowed_area_t *packet = (mavlink_safety_set_allowed_area_t *)msgbuf; + packet->p1x = p1x; + packet->p1y = p1y; + packet->p1z = p1z; + packet->p2x = p2x; + packet->p2y = p2y; + packet->p2z = p2z; + packet->target_system = target_system; + packet->target_component = target_component; + packet->frame = frame; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SAFETY_SET_ALLOWED_AREA, (const char *)packet, MAVLINK_MSG_ID_SAFETY_SET_ALLOWED_AREA_LEN, MAVLINK_MSG_ID_SAFETY_SET_ALLOWED_AREA_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SAFETY_SET_ALLOWED_AREA, (const char *)packet, MAVLINK_MSG_ID_SAFETY_SET_ALLOWED_AREA_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SAFETY_SET_ALLOWED_AREA UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_scaled_imu.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_scaled_imu.h index 3010d051a..1648a56f8 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_scaled_imu.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_scaled_imu.h @@ -245,6 +245,56 @@ static inline void mavlink_msg_scaled_imu_send(mavlink_channel_t chan, uint32_t #endif } +#if MAVLINK_MSG_ID_SCALED_IMU_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_scaled_imu_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint32_t time_boot_ms, int16_t xacc, int16_t yacc, int16_t zacc, int16_t xgyro, int16_t ygyro, int16_t zgyro, int16_t xmag, int16_t ymag, int16_t zmag) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, time_boot_ms); + _mav_put_int16_t(buf, 4, xacc); + _mav_put_int16_t(buf, 6, yacc); + _mav_put_int16_t(buf, 8, zacc); + _mav_put_int16_t(buf, 10, xgyro); + _mav_put_int16_t(buf, 12, ygyro); + _mav_put_int16_t(buf, 14, zgyro); + _mav_put_int16_t(buf, 16, xmag); + _mav_put_int16_t(buf, 18, ymag); + _mav_put_int16_t(buf, 20, zmag); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SCALED_IMU, buf, MAVLINK_MSG_ID_SCALED_IMU_LEN, MAVLINK_MSG_ID_SCALED_IMU_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SCALED_IMU, buf, MAVLINK_MSG_ID_SCALED_IMU_LEN); +#endif +#else + mavlink_scaled_imu_t *packet = (mavlink_scaled_imu_t *)msgbuf; + packet->time_boot_ms = time_boot_ms; + packet->xacc = xacc; + packet->yacc = yacc; + packet->zacc = zacc; + packet->xgyro = xgyro; + packet->ygyro = ygyro; + packet->zgyro = zgyro; + packet->xmag = xmag; + packet->ymag = ymag; + packet->zmag = zmag; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SCALED_IMU, (const char *)packet, MAVLINK_MSG_ID_SCALED_IMU_LEN, MAVLINK_MSG_ID_SCALED_IMU_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SCALED_IMU, (const char *)packet, MAVLINK_MSG_ID_SCALED_IMU_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SCALED_IMU UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_scaled_imu2.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_scaled_imu2.h index ea4dbbf81..1dea121dd 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_scaled_imu2.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_scaled_imu2.h @@ -245,6 +245,56 @@ static inline void mavlink_msg_scaled_imu2_send(mavlink_channel_t chan, uint32_t #endif } +#if MAVLINK_MSG_ID_SCALED_IMU2_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_scaled_imu2_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint32_t time_boot_ms, int16_t xacc, int16_t yacc, int16_t zacc, int16_t xgyro, int16_t ygyro, int16_t zgyro, int16_t xmag, int16_t ymag, int16_t zmag) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, time_boot_ms); + _mav_put_int16_t(buf, 4, xacc); + _mav_put_int16_t(buf, 6, yacc); + _mav_put_int16_t(buf, 8, zacc); + _mav_put_int16_t(buf, 10, xgyro); + _mav_put_int16_t(buf, 12, ygyro); + _mav_put_int16_t(buf, 14, zgyro); + _mav_put_int16_t(buf, 16, xmag); + _mav_put_int16_t(buf, 18, ymag); + _mav_put_int16_t(buf, 20, zmag); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SCALED_IMU2, buf, MAVLINK_MSG_ID_SCALED_IMU2_LEN, MAVLINK_MSG_ID_SCALED_IMU2_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SCALED_IMU2, buf, MAVLINK_MSG_ID_SCALED_IMU2_LEN); +#endif +#else + mavlink_scaled_imu2_t *packet = (mavlink_scaled_imu2_t *)msgbuf; + packet->time_boot_ms = time_boot_ms; + packet->xacc = xacc; + packet->yacc = yacc; + packet->zacc = zacc; + packet->xgyro = xgyro; + packet->ygyro = ygyro; + packet->zgyro = zgyro; + packet->xmag = xmag; + packet->ymag = ymag; + packet->zmag = zmag; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SCALED_IMU2, (const char *)packet, MAVLINK_MSG_ID_SCALED_IMU2_LEN, MAVLINK_MSG_ID_SCALED_IMU2_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SCALED_IMU2, (const char *)packet, MAVLINK_MSG_ID_SCALED_IMU2_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SCALED_IMU2 UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_scaled_pressure.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_scaled_pressure.h index 10324bc94..e0d6d8766 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_scaled_pressure.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_scaled_pressure.h @@ -179,6 +179,44 @@ static inline void mavlink_msg_scaled_pressure_send(mavlink_channel_t chan, uint #endif } +#if MAVLINK_MSG_ID_SCALED_PRESSURE_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_scaled_pressure_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint32_t time_boot_ms, float press_abs, float press_diff, int16_t temperature) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, time_boot_ms); + _mav_put_float(buf, 4, press_abs); + _mav_put_float(buf, 8, press_diff); + _mav_put_int16_t(buf, 12, temperature); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SCALED_PRESSURE, buf, MAVLINK_MSG_ID_SCALED_PRESSURE_LEN, MAVLINK_MSG_ID_SCALED_PRESSURE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SCALED_PRESSURE, buf, MAVLINK_MSG_ID_SCALED_PRESSURE_LEN); +#endif +#else + mavlink_scaled_pressure_t *packet = (mavlink_scaled_pressure_t *)msgbuf; + packet->time_boot_ms = time_boot_ms; + packet->press_abs = press_abs; + packet->press_diff = press_diff; + packet->temperature = temperature; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SCALED_PRESSURE, (const char *)packet, MAVLINK_MSG_ID_SCALED_PRESSURE_LEN, MAVLINK_MSG_ID_SCALED_PRESSURE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SCALED_PRESSURE, (const char *)packet, MAVLINK_MSG_ID_SCALED_PRESSURE_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SCALED_PRESSURE UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_serial_control.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_serial_control.h new file mode 100644 index 000000000..cbf72bae3 --- /dev/null +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_serial_control.h @@ -0,0 +1,321 @@ +// MESSAGE SERIAL_CONTROL PACKING + +#define MAVLINK_MSG_ID_SERIAL_CONTROL 126 + +typedef struct __mavlink_serial_control_t +{ + uint32_t baudrate; ///< Baudrate of transfer. Zero means no change. + uint16_t timeout; ///< Timeout for reply data in milliseconds + uint8_t device; ///< See SERIAL_CONTROL_DEV enum + uint8_t flags; ///< See SERIAL_CONTROL_FLAG enum + uint8_t count; ///< how many bytes in this transfer + uint8_t data[70]; ///< serial data +} mavlink_serial_control_t; + +#define MAVLINK_MSG_ID_SERIAL_CONTROL_LEN 79 +#define MAVLINK_MSG_ID_126_LEN 79 + +#define MAVLINK_MSG_ID_SERIAL_CONTROL_CRC 220 +#define MAVLINK_MSG_ID_126_CRC 220 + +#define MAVLINK_MSG_SERIAL_CONTROL_FIELD_DATA_LEN 70 + +#define MAVLINK_MESSAGE_INFO_SERIAL_CONTROL { \ + "SERIAL_CONTROL", \ + 6, \ + { { "baudrate", NULL, MAVLINK_TYPE_UINT32_T, 0, 0, offsetof(mavlink_serial_control_t, baudrate) }, \ + { "timeout", NULL, MAVLINK_TYPE_UINT16_T, 0, 4, offsetof(mavlink_serial_control_t, timeout) }, \ + { "device", NULL, MAVLINK_TYPE_UINT8_T, 0, 6, offsetof(mavlink_serial_control_t, device) }, \ + { "flags", NULL, MAVLINK_TYPE_UINT8_T, 0, 7, offsetof(mavlink_serial_control_t, flags) }, \ + { "count", NULL, MAVLINK_TYPE_UINT8_T, 0, 8, offsetof(mavlink_serial_control_t, count) }, \ + { "data", NULL, MAVLINK_TYPE_UINT8_T, 70, 9, offsetof(mavlink_serial_control_t, data) }, \ + } \ +} + + +/** + * @brief Pack a serial_control message + * @param system_id ID of this system + * @param component_id ID of this component (e.g. 200 for IMU) + * @param msg The MAVLink message to compress the data into + * + * @param device See SERIAL_CONTROL_DEV enum + * @param flags See SERIAL_CONTROL_FLAG enum + * @param timeout Timeout for reply data in milliseconds + * @param baudrate Baudrate of transfer. Zero means no change. + * @param count how many bytes in this transfer + * @param data serial data + * @return length of the message in bytes (excluding serial stream start sign) + */ +static inline uint16_t mavlink_msg_serial_control_pack(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, + uint8_t device, uint8_t flags, uint16_t timeout, uint32_t baudrate, uint8_t count, const uint8_t *data) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char buf[MAVLINK_MSG_ID_SERIAL_CONTROL_LEN]; + _mav_put_uint32_t(buf, 0, baudrate); + _mav_put_uint16_t(buf, 4, timeout); + _mav_put_uint8_t(buf, 6, device); + _mav_put_uint8_t(buf, 7, flags); + _mav_put_uint8_t(buf, 8, count); + _mav_put_uint8_t_array(buf, 9, data, 70); + memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, MAVLINK_MSG_ID_SERIAL_CONTROL_LEN); +#else + mavlink_serial_control_t packet; + packet.baudrate = baudrate; + packet.timeout = timeout; + packet.device = device; + packet.flags = flags; + packet.count = count; + mav_array_memcpy(packet.data, data, sizeof(uint8_t)*70); + memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, MAVLINK_MSG_ID_SERIAL_CONTROL_LEN); +#endif + + msg->msgid = MAVLINK_MSG_ID_SERIAL_CONTROL; +#if MAVLINK_CRC_EXTRA + return mavlink_finalize_message(msg, system_id, component_id, MAVLINK_MSG_ID_SERIAL_CONTROL_LEN, MAVLINK_MSG_ID_SERIAL_CONTROL_CRC); +#else + return mavlink_finalize_message(msg, system_id, component_id, MAVLINK_MSG_ID_SERIAL_CONTROL_LEN); +#endif +} + +/** + * @brief Pack a serial_control message on a channel + * @param system_id ID of this system + * @param component_id ID of this component (e.g. 200 for IMU) + * @param chan The MAVLink channel this message will be sent over + * @param msg The MAVLink message to compress the data into + * @param device See SERIAL_CONTROL_DEV enum + * @param flags See SERIAL_CONTROL_FLAG enum + * @param timeout Timeout for reply data in milliseconds + * @param baudrate Baudrate of transfer. Zero means no change. + * @param count how many bytes in this transfer + * @param data serial data + * @return length of the message in bytes (excluding serial stream start sign) + */ +static inline uint16_t mavlink_msg_serial_control_pack_chan(uint8_t system_id, uint8_t component_id, uint8_t chan, + mavlink_message_t* msg, + uint8_t device,uint8_t flags,uint16_t timeout,uint32_t baudrate,uint8_t count,const uint8_t *data) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char buf[MAVLINK_MSG_ID_SERIAL_CONTROL_LEN]; + _mav_put_uint32_t(buf, 0, baudrate); + _mav_put_uint16_t(buf, 4, timeout); + _mav_put_uint8_t(buf, 6, device); + _mav_put_uint8_t(buf, 7, flags); + _mav_put_uint8_t(buf, 8, count); + _mav_put_uint8_t_array(buf, 9, data, 70); + memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, MAVLINK_MSG_ID_SERIAL_CONTROL_LEN); +#else + mavlink_serial_control_t packet; + packet.baudrate = baudrate; + packet.timeout = timeout; + packet.device = device; + packet.flags = flags; + packet.count = count; + mav_array_memcpy(packet.data, data, sizeof(uint8_t)*70); + memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, MAVLINK_MSG_ID_SERIAL_CONTROL_LEN); +#endif + + msg->msgid = MAVLINK_MSG_ID_SERIAL_CONTROL; +#if MAVLINK_CRC_EXTRA + return mavlink_finalize_message_chan(msg, system_id, component_id, chan, MAVLINK_MSG_ID_SERIAL_CONTROL_LEN, MAVLINK_MSG_ID_SERIAL_CONTROL_CRC); +#else + return mavlink_finalize_message_chan(msg, system_id, component_id, chan, MAVLINK_MSG_ID_SERIAL_CONTROL_LEN); +#endif +} + +/** + * @brief Encode a serial_control struct + * + * @param system_id ID of this system + * @param component_id ID of this component (e.g. 200 for IMU) + * @param msg The MAVLink message to compress the data into + * @param serial_control C-struct to read the message contents from + */ +static inline uint16_t mavlink_msg_serial_control_encode(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, const mavlink_serial_control_t* serial_control) +{ + return mavlink_msg_serial_control_pack(system_id, component_id, msg, serial_control->device, serial_control->flags, serial_control->timeout, serial_control->baudrate, serial_control->count, serial_control->data); +} + +/** + * @brief Encode a serial_control struct on a channel + * + * @param system_id ID of this system + * @param component_id ID of this component (e.g. 200 for IMU) + * @param chan The MAVLink channel this message will be sent over + * @param msg The MAVLink message to compress the data into + * @param serial_control C-struct to read the message contents from + */ +static inline uint16_t mavlink_msg_serial_control_encode_chan(uint8_t system_id, uint8_t component_id, uint8_t chan, mavlink_message_t* msg, const mavlink_serial_control_t* serial_control) +{ + return mavlink_msg_serial_control_pack_chan(system_id, component_id, chan, msg, serial_control->device, serial_control->flags, serial_control->timeout, serial_control->baudrate, serial_control->count, serial_control->data); +} + +/** + * @brief Send a serial_control message + * @param chan MAVLink channel to send the message + * + * @param device See SERIAL_CONTROL_DEV enum + * @param flags See SERIAL_CONTROL_FLAG enum + * @param timeout Timeout for reply data in milliseconds + * @param baudrate Baudrate of transfer. Zero means no change. + * @param count how many bytes in this transfer + * @param data serial data + */ +#ifdef MAVLINK_USE_CONVENIENCE_FUNCTIONS + +static inline void mavlink_msg_serial_control_send(mavlink_channel_t chan, uint8_t device, uint8_t flags, uint16_t timeout, uint32_t baudrate, uint8_t count, const uint8_t *data) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char buf[MAVLINK_MSG_ID_SERIAL_CONTROL_LEN]; + _mav_put_uint32_t(buf, 0, baudrate); + _mav_put_uint16_t(buf, 4, timeout); + _mav_put_uint8_t(buf, 6, device); + _mav_put_uint8_t(buf, 7, flags); + _mav_put_uint8_t(buf, 8, count); + _mav_put_uint8_t_array(buf, 9, data, 70); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_CONTROL, buf, MAVLINK_MSG_ID_SERIAL_CONTROL_LEN, MAVLINK_MSG_ID_SERIAL_CONTROL_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_CONTROL, buf, MAVLINK_MSG_ID_SERIAL_CONTROL_LEN); +#endif +#else + mavlink_serial_control_t packet; + packet.baudrate = baudrate; + packet.timeout = timeout; + packet.device = device; + packet.flags = flags; + packet.count = count; + mav_array_memcpy(packet.data, data, sizeof(uint8_t)*70); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_CONTROL, (const char *)&packet, MAVLINK_MSG_ID_SERIAL_CONTROL_LEN, MAVLINK_MSG_ID_SERIAL_CONTROL_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_CONTROL, (const char *)&packet, MAVLINK_MSG_ID_SERIAL_CONTROL_LEN); +#endif +#endif +} + +#if MAVLINK_MSG_ID_SERIAL_CONTROL_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_serial_control_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t device, uint8_t flags, uint16_t timeout, uint32_t baudrate, uint8_t count, const uint8_t *data) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, baudrate); + _mav_put_uint16_t(buf, 4, timeout); + _mav_put_uint8_t(buf, 6, device); + _mav_put_uint8_t(buf, 7, flags); + _mav_put_uint8_t(buf, 8, count); + _mav_put_uint8_t_array(buf, 9, data, 70); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_CONTROL, buf, MAVLINK_MSG_ID_SERIAL_CONTROL_LEN, MAVLINK_MSG_ID_SERIAL_CONTROL_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_CONTROL, buf, MAVLINK_MSG_ID_SERIAL_CONTROL_LEN); +#endif +#else + mavlink_serial_control_t *packet = (mavlink_serial_control_t *)msgbuf; + packet->baudrate = baudrate; + packet->timeout = timeout; + packet->device = device; + packet->flags = flags; + packet->count = count; + mav_array_memcpy(packet->data, data, sizeof(uint8_t)*70); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_CONTROL, (const char *)packet, MAVLINK_MSG_ID_SERIAL_CONTROL_LEN, MAVLINK_MSG_ID_SERIAL_CONTROL_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_CONTROL, (const char *)packet, MAVLINK_MSG_ID_SERIAL_CONTROL_LEN); +#endif +#endif +} +#endif + +#endif + +// MESSAGE SERIAL_CONTROL UNPACKING + + +/** + * @brief Get field device from serial_control message + * + * @return See SERIAL_CONTROL_DEV enum + */ +static inline uint8_t mavlink_msg_serial_control_get_device(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint8_t(msg, 6); +} + +/** + * @brief Get field flags from serial_control message + * + * @return See SERIAL_CONTROL_FLAG enum + */ +static inline uint8_t mavlink_msg_serial_control_get_flags(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint8_t(msg, 7); +} + +/** + * @brief Get field timeout from serial_control message + * + * @return Timeout for reply data in milliseconds + */ +static inline uint16_t mavlink_msg_serial_control_get_timeout(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint16_t(msg, 4); +} + +/** + * @brief Get field baudrate from serial_control message + * + * @return Baudrate of transfer. Zero means no change. + */ +static inline uint32_t mavlink_msg_serial_control_get_baudrate(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint32_t(msg, 0); +} + +/** + * @brief Get field count from serial_control message + * + * @return how many bytes in this transfer + */ +static inline uint8_t mavlink_msg_serial_control_get_count(const mavlink_message_t* msg) +{ + return _MAV_RETURN_uint8_t(msg, 8); +} + +/** + * @brief Get field data from serial_control message + * + * @return serial data + */ +static inline uint16_t mavlink_msg_serial_control_get_data(const mavlink_message_t* msg, uint8_t *data) +{ + return _MAV_RETURN_uint8_t_array(msg, data, 70, 9); +} + +/** + * @brief Decode a serial_control message into a struct + * + * @param msg The message to decode + * @param serial_control C-struct to decode the message contents into + */ +static inline void mavlink_msg_serial_control_decode(const mavlink_message_t* msg, mavlink_serial_control_t* serial_control) +{ +#if MAVLINK_NEED_BYTE_SWAP + serial_control->baudrate = mavlink_msg_serial_control_get_baudrate(msg); + serial_control->timeout = mavlink_msg_serial_control_get_timeout(msg); + serial_control->device = mavlink_msg_serial_control_get_device(msg); + serial_control->flags = mavlink_msg_serial_control_get_flags(msg); + serial_control->count = mavlink_msg_serial_control_get_count(msg); + mavlink_msg_serial_control_get_data(msg, serial_control->data); +#else + memcpy(serial_control, _MAV_PAYLOAD(msg), MAVLINK_MSG_ID_SERIAL_CONTROL_LEN); +#endif +} diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_servo_output_raw.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_servo_output_raw.h index 6a14e93ed..e8408862f 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_servo_output_raw.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_servo_output_raw.h @@ -245,6 +245,56 @@ static inline void mavlink_msg_servo_output_raw_send(mavlink_channel_t chan, uin #endif } +#if MAVLINK_MSG_ID_SERVO_OUTPUT_RAW_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_servo_output_raw_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint32_t time_usec, uint8_t port, uint16_t servo1_raw, uint16_t servo2_raw, uint16_t servo3_raw, uint16_t servo4_raw, uint16_t servo5_raw, uint16_t servo6_raw, uint16_t servo7_raw, uint16_t servo8_raw) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, time_usec); + _mav_put_uint16_t(buf, 4, servo1_raw); + _mav_put_uint16_t(buf, 6, servo2_raw); + _mav_put_uint16_t(buf, 8, servo3_raw); + _mav_put_uint16_t(buf, 10, servo4_raw); + _mav_put_uint16_t(buf, 12, servo5_raw); + _mav_put_uint16_t(buf, 14, servo6_raw); + _mav_put_uint16_t(buf, 16, servo7_raw); + _mav_put_uint16_t(buf, 18, servo8_raw); + _mav_put_uint8_t(buf, 20, port); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERVO_OUTPUT_RAW, buf, MAVLINK_MSG_ID_SERVO_OUTPUT_RAW_LEN, MAVLINK_MSG_ID_SERVO_OUTPUT_RAW_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERVO_OUTPUT_RAW, buf, MAVLINK_MSG_ID_SERVO_OUTPUT_RAW_LEN); +#endif +#else + mavlink_servo_output_raw_t *packet = (mavlink_servo_output_raw_t *)msgbuf; + packet->time_usec = time_usec; + packet->servo1_raw = servo1_raw; + packet->servo2_raw = servo2_raw; + packet->servo3_raw = servo3_raw; + packet->servo4_raw = servo4_raw; + packet->servo5_raw = servo5_raw; + packet->servo6_raw = servo6_raw; + packet->servo7_raw = servo7_raw; + packet->servo8_raw = servo8_raw; + packet->port = port; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERVO_OUTPUT_RAW, (const char *)packet, MAVLINK_MSG_ID_SERVO_OUTPUT_RAW_LEN, MAVLINK_MSG_ID_SERVO_OUTPUT_RAW_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERVO_OUTPUT_RAW, (const char *)packet, MAVLINK_MSG_ID_SERVO_OUTPUT_RAW_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SERVO_OUTPUT_RAW UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_global_position_setpoint_int.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_global_position_setpoint_int.h index 6f0d7a69d..94a7b432b 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_global_position_setpoint_int.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_global_position_setpoint_int.h @@ -190,6 +190,46 @@ static inline void mavlink_msg_set_global_position_setpoint_int_send(mavlink_cha #endif } +#if MAVLINK_MSG_ID_SET_GLOBAL_POSITION_SETPOINT_INT_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_set_global_position_setpoint_int_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t coordinate_frame, int32_t latitude, int32_t longitude, int32_t altitude, int16_t yaw) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_int32_t(buf, 0, latitude); + _mav_put_int32_t(buf, 4, longitude); + _mav_put_int32_t(buf, 8, altitude); + _mav_put_int16_t(buf, 12, yaw); + _mav_put_uint8_t(buf, 14, coordinate_frame); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_GLOBAL_POSITION_SETPOINT_INT, buf, MAVLINK_MSG_ID_SET_GLOBAL_POSITION_SETPOINT_INT_LEN, MAVLINK_MSG_ID_SET_GLOBAL_POSITION_SETPOINT_INT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_GLOBAL_POSITION_SETPOINT_INT, buf, MAVLINK_MSG_ID_SET_GLOBAL_POSITION_SETPOINT_INT_LEN); +#endif +#else + mavlink_set_global_position_setpoint_int_t *packet = (mavlink_set_global_position_setpoint_int_t *)msgbuf; + packet->latitude = latitude; + packet->longitude = longitude; + packet->altitude = altitude; + packet->yaw = yaw; + packet->coordinate_frame = coordinate_frame; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_GLOBAL_POSITION_SETPOINT_INT, (const char *)packet, MAVLINK_MSG_ID_SET_GLOBAL_POSITION_SETPOINT_INT_LEN, MAVLINK_MSG_ID_SET_GLOBAL_POSITION_SETPOINT_INT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_GLOBAL_POSITION_SETPOINT_INT, (const char *)packet, MAVLINK_MSG_ID_SET_GLOBAL_POSITION_SETPOINT_INT_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SET_GLOBAL_POSITION_SETPOINT_INT UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_gps_global_origin.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_gps_global_origin.h index c444d8d52..1c018cbee 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_gps_global_origin.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_gps_global_origin.h @@ -179,6 +179,44 @@ static inline void mavlink_msg_set_gps_global_origin_send(mavlink_channel_t chan #endif } +#if MAVLINK_MSG_ID_SET_GPS_GLOBAL_ORIGIN_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_set_gps_global_origin_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, int32_t latitude, int32_t longitude, int32_t altitude) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_int32_t(buf, 0, latitude); + _mav_put_int32_t(buf, 4, longitude); + _mav_put_int32_t(buf, 8, altitude); + _mav_put_uint8_t(buf, 12, target_system); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_GPS_GLOBAL_ORIGIN, buf, MAVLINK_MSG_ID_SET_GPS_GLOBAL_ORIGIN_LEN, MAVLINK_MSG_ID_SET_GPS_GLOBAL_ORIGIN_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_GPS_GLOBAL_ORIGIN, buf, MAVLINK_MSG_ID_SET_GPS_GLOBAL_ORIGIN_LEN); +#endif +#else + mavlink_set_gps_global_origin_t *packet = (mavlink_set_gps_global_origin_t *)msgbuf; + packet->latitude = latitude; + packet->longitude = longitude; + packet->altitude = altitude; + packet->target_system = target_system; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_GPS_GLOBAL_ORIGIN, (const char *)packet, MAVLINK_MSG_ID_SET_GPS_GLOBAL_ORIGIN_LEN, MAVLINK_MSG_ID_SET_GPS_GLOBAL_ORIGIN_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_GPS_GLOBAL_ORIGIN, (const char *)packet, MAVLINK_MSG_ID_SET_GPS_GLOBAL_ORIGIN_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SET_GPS_GLOBAL_ORIGIN UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_local_position_setpoint.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_local_position_setpoint.h index 6f2835e03..04dbe6e9a 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_local_position_setpoint.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_local_position_setpoint.h @@ -212,6 +212,50 @@ static inline void mavlink_msg_set_local_position_setpoint_send(mavlink_channel_ #endif } +#if MAVLINK_MSG_ID_SET_LOCAL_POSITION_SETPOINT_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_set_local_position_setpoint_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, uint8_t coordinate_frame, float x, float y, float z, float yaw) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, x); + _mav_put_float(buf, 4, y); + _mav_put_float(buf, 8, z); + _mav_put_float(buf, 12, yaw); + _mav_put_uint8_t(buf, 16, target_system); + _mav_put_uint8_t(buf, 17, target_component); + _mav_put_uint8_t(buf, 18, coordinate_frame); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_LOCAL_POSITION_SETPOINT, buf, MAVLINK_MSG_ID_SET_LOCAL_POSITION_SETPOINT_LEN, MAVLINK_MSG_ID_SET_LOCAL_POSITION_SETPOINT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_LOCAL_POSITION_SETPOINT, buf, MAVLINK_MSG_ID_SET_LOCAL_POSITION_SETPOINT_LEN); +#endif +#else + mavlink_set_local_position_setpoint_t *packet = (mavlink_set_local_position_setpoint_t *)msgbuf; + packet->x = x; + packet->y = y; + packet->z = z; + packet->yaw = yaw; + packet->target_system = target_system; + packet->target_component = target_component; + packet->coordinate_frame = coordinate_frame; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_LOCAL_POSITION_SETPOINT, (const char *)packet, MAVLINK_MSG_ID_SET_LOCAL_POSITION_SETPOINT_LEN, MAVLINK_MSG_ID_SET_LOCAL_POSITION_SETPOINT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_LOCAL_POSITION_SETPOINT, (const char *)packet, MAVLINK_MSG_ID_SET_LOCAL_POSITION_SETPOINT_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SET_LOCAL_POSITION_SETPOINT UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_mode.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_mode.h index 1aff42cce..4b60a4120 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_mode.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_mode.h @@ -168,6 +168,42 @@ static inline void mavlink_msg_set_mode_send(mavlink_channel_t chan, uint8_t tar #endif } +#if MAVLINK_MSG_ID_SET_MODE_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_set_mode_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t base_mode, uint32_t custom_mode) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, custom_mode); + _mav_put_uint8_t(buf, 4, target_system); + _mav_put_uint8_t(buf, 5, base_mode); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_MODE, buf, MAVLINK_MSG_ID_SET_MODE_LEN, MAVLINK_MSG_ID_SET_MODE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_MODE, buf, MAVLINK_MSG_ID_SET_MODE_LEN); +#endif +#else + mavlink_set_mode_t *packet = (mavlink_set_mode_t *)msgbuf; + packet->custom_mode = custom_mode; + packet->target_system = target_system; + packet->base_mode = base_mode; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_MODE, (const char *)packet, MAVLINK_MSG_ID_SET_MODE_LEN, MAVLINK_MSG_ID_SET_MODE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_MODE, (const char *)packet, MAVLINK_MSG_ID_SET_MODE_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SET_MODE UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_quad_motors_setpoint.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_quad_motors_setpoint.h index 8ceb8888f..8c0e2a014 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_quad_motors_setpoint.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_quad_motors_setpoint.h @@ -190,6 +190,46 @@ static inline void mavlink_msg_set_quad_motors_setpoint_send(mavlink_channel_t c #endif } +#if MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_set_quad_motors_setpoint_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint16_t motor_front_nw, uint16_t motor_right_ne, uint16_t motor_back_se, uint16_t motor_left_sw) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint16_t(buf, 0, motor_front_nw); + _mav_put_uint16_t(buf, 2, motor_right_ne); + _mav_put_uint16_t(buf, 4, motor_back_se); + _mav_put_uint16_t(buf, 6, motor_left_sw); + _mav_put_uint8_t(buf, 8, target_system); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT, buf, MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT_LEN, MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT, buf, MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT_LEN); +#endif +#else + mavlink_set_quad_motors_setpoint_t *packet = (mavlink_set_quad_motors_setpoint_t *)msgbuf; + packet->motor_front_nw = motor_front_nw; + packet->motor_right_ne = motor_right_ne; + packet->motor_back_se = motor_back_se; + packet->motor_left_sw = motor_left_sw; + packet->target_system = target_system; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT, (const char *)packet, MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT_LEN, MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT, (const char *)packet, MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SET_QUAD_MOTORS_SETPOINT UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_quad_swarm_led_roll_pitch_yaw_thrust.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_quad_swarm_led_roll_pitch_yaw_thrust.h index 9ef294cc9..c9a084773 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_quad_swarm_led_roll_pitch_yaw_thrust.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_quad_swarm_led_roll_pitch_yaw_thrust.h @@ -234,6 +234,52 @@ static inline void mavlink_msg_set_quad_swarm_led_roll_pitch_yaw_thrust_send(mav #endif } +#if MAVLINK_MSG_ID_SET_QUAD_SWARM_LED_ROLL_PITCH_YAW_THRUST_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_set_quad_swarm_led_roll_pitch_yaw_thrust_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t group, uint8_t mode, const uint8_t *led_red, const uint8_t *led_blue, const uint8_t *led_green, const int16_t *roll, const int16_t *pitch, const int16_t *yaw, const uint16_t *thrust) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint8_t(buf, 32, group); + _mav_put_uint8_t(buf, 33, mode); + _mav_put_int16_t_array(buf, 0, roll, 4); + _mav_put_int16_t_array(buf, 8, pitch, 4); + _mav_put_int16_t_array(buf, 16, yaw, 4); + _mav_put_uint16_t_array(buf, 24, thrust, 4); + _mav_put_uint8_t_array(buf, 34, led_red, 4); + _mav_put_uint8_t_array(buf, 38, led_blue, 4); + _mav_put_uint8_t_array(buf, 42, led_green, 4); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_QUAD_SWARM_LED_ROLL_PITCH_YAW_THRUST, buf, MAVLINK_MSG_ID_SET_QUAD_SWARM_LED_ROLL_PITCH_YAW_THRUST_LEN, MAVLINK_MSG_ID_SET_QUAD_SWARM_LED_ROLL_PITCH_YAW_THRUST_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_QUAD_SWARM_LED_ROLL_PITCH_YAW_THRUST, buf, MAVLINK_MSG_ID_SET_QUAD_SWARM_LED_ROLL_PITCH_YAW_THRUST_LEN); +#endif +#else + mavlink_set_quad_swarm_led_roll_pitch_yaw_thrust_t *packet = (mavlink_set_quad_swarm_led_roll_pitch_yaw_thrust_t *)msgbuf; + packet->group = group; + packet->mode = mode; + mav_array_memcpy(packet->roll, roll, sizeof(int16_t)*4); + mav_array_memcpy(packet->pitch, pitch, sizeof(int16_t)*4); + mav_array_memcpy(packet->yaw, yaw, sizeof(int16_t)*4); + mav_array_memcpy(packet->thrust, thrust, sizeof(uint16_t)*4); + mav_array_memcpy(packet->led_red, led_red, sizeof(uint8_t)*4); + mav_array_memcpy(packet->led_blue, led_blue, sizeof(uint8_t)*4); + mav_array_memcpy(packet->led_green, led_green, sizeof(uint8_t)*4); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_QUAD_SWARM_LED_ROLL_PITCH_YAW_THRUST, (const char *)packet, MAVLINK_MSG_ID_SET_QUAD_SWARM_LED_ROLL_PITCH_YAW_THRUST_LEN, MAVLINK_MSG_ID_SET_QUAD_SWARM_LED_ROLL_PITCH_YAW_THRUST_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_QUAD_SWARM_LED_ROLL_PITCH_YAW_THRUST, (const char *)packet, MAVLINK_MSG_ID_SET_QUAD_SWARM_LED_ROLL_PITCH_YAW_THRUST_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SET_QUAD_SWARM_LED_ROLL_PITCH_YAW_THRUST UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_quad_swarm_roll_pitch_yaw_thrust.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_quad_swarm_roll_pitch_yaw_thrust.h index 7d8d526f8..338bf0e43 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_quad_swarm_roll_pitch_yaw_thrust.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_quad_swarm_roll_pitch_yaw_thrust.h @@ -198,6 +198,46 @@ static inline void mavlink_msg_set_quad_swarm_roll_pitch_yaw_thrust_send(mavlink #endif } +#if MAVLINK_MSG_ID_SET_QUAD_SWARM_ROLL_PITCH_YAW_THRUST_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_set_quad_swarm_roll_pitch_yaw_thrust_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t group, uint8_t mode, const int16_t *roll, const int16_t *pitch, const int16_t *yaw, const uint16_t *thrust) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint8_t(buf, 32, group); + _mav_put_uint8_t(buf, 33, mode); + _mav_put_int16_t_array(buf, 0, roll, 4); + _mav_put_int16_t_array(buf, 8, pitch, 4); + _mav_put_int16_t_array(buf, 16, yaw, 4); + _mav_put_uint16_t_array(buf, 24, thrust, 4); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_QUAD_SWARM_ROLL_PITCH_YAW_THRUST, buf, MAVLINK_MSG_ID_SET_QUAD_SWARM_ROLL_PITCH_YAW_THRUST_LEN, MAVLINK_MSG_ID_SET_QUAD_SWARM_ROLL_PITCH_YAW_THRUST_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_QUAD_SWARM_ROLL_PITCH_YAW_THRUST, buf, MAVLINK_MSG_ID_SET_QUAD_SWARM_ROLL_PITCH_YAW_THRUST_LEN); +#endif +#else + mavlink_set_quad_swarm_roll_pitch_yaw_thrust_t *packet = (mavlink_set_quad_swarm_roll_pitch_yaw_thrust_t *)msgbuf; + packet->group = group; + packet->mode = mode; + mav_array_memcpy(packet->roll, roll, sizeof(int16_t)*4); + mav_array_memcpy(packet->pitch, pitch, sizeof(int16_t)*4); + mav_array_memcpy(packet->yaw, yaw, sizeof(int16_t)*4); + mav_array_memcpy(packet->thrust, thrust, sizeof(uint16_t)*4); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_QUAD_SWARM_ROLL_PITCH_YAW_THRUST, (const char *)packet, MAVLINK_MSG_ID_SET_QUAD_SWARM_ROLL_PITCH_YAW_THRUST_LEN, MAVLINK_MSG_ID_SET_QUAD_SWARM_ROLL_PITCH_YAW_THRUST_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_QUAD_SWARM_ROLL_PITCH_YAW_THRUST, (const char *)packet, MAVLINK_MSG_ID_SET_QUAD_SWARM_ROLL_PITCH_YAW_THRUST_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SET_QUAD_SWARM_ROLL_PITCH_YAW_THRUST UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_roll_pitch_yaw_speed_thrust.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_roll_pitch_yaw_speed_thrust.h index 5846ba41f..4d0e5931f 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_roll_pitch_yaw_speed_thrust.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_roll_pitch_yaw_speed_thrust.h @@ -201,6 +201,48 @@ static inline void mavlink_msg_set_roll_pitch_yaw_speed_thrust_send(mavlink_chan #endif } +#if MAVLINK_MSG_ID_SET_ROLL_PITCH_YAW_SPEED_THRUST_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_set_roll_pitch_yaw_speed_thrust_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, float roll_speed, float pitch_speed, float yaw_speed, float thrust) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, roll_speed); + _mav_put_float(buf, 4, pitch_speed); + _mav_put_float(buf, 8, yaw_speed); + _mav_put_float(buf, 12, thrust); + _mav_put_uint8_t(buf, 16, target_system); + _mav_put_uint8_t(buf, 17, target_component); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_ROLL_PITCH_YAW_SPEED_THRUST, buf, MAVLINK_MSG_ID_SET_ROLL_PITCH_YAW_SPEED_THRUST_LEN, MAVLINK_MSG_ID_SET_ROLL_PITCH_YAW_SPEED_THRUST_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_ROLL_PITCH_YAW_SPEED_THRUST, buf, MAVLINK_MSG_ID_SET_ROLL_PITCH_YAW_SPEED_THRUST_LEN); +#endif +#else + mavlink_set_roll_pitch_yaw_speed_thrust_t *packet = (mavlink_set_roll_pitch_yaw_speed_thrust_t *)msgbuf; + packet->roll_speed = roll_speed; + packet->pitch_speed = pitch_speed; + packet->yaw_speed = yaw_speed; + packet->thrust = thrust; + packet->target_system = target_system; + packet->target_component = target_component; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_ROLL_PITCH_YAW_SPEED_THRUST, (const char *)packet, MAVLINK_MSG_ID_SET_ROLL_PITCH_YAW_SPEED_THRUST_LEN, MAVLINK_MSG_ID_SET_ROLL_PITCH_YAW_SPEED_THRUST_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_ROLL_PITCH_YAW_SPEED_THRUST, (const char *)packet, MAVLINK_MSG_ID_SET_ROLL_PITCH_YAW_SPEED_THRUST_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SET_ROLL_PITCH_YAW_SPEED_THRUST UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_roll_pitch_yaw_thrust.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_roll_pitch_yaw_thrust.h index 334fd39e3..21e0a43f2 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_roll_pitch_yaw_thrust.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_roll_pitch_yaw_thrust.h @@ -201,6 +201,48 @@ static inline void mavlink_msg_set_roll_pitch_yaw_thrust_send(mavlink_channel_t #endif } +#if MAVLINK_MSG_ID_SET_ROLL_PITCH_YAW_THRUST_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_set_roll_pitch_yaw_thrust_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, float roll, float pitch, float yaw, float thrust) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, roll); + _mav_put_float(buf, 4, pitch); + _mav_put_float(buf, 8, yaw); + _mav_put_float(buf, 12, thrust); + _mav_put_uint8_t(buf, 16, target_system); + _mav_put_uint8_t(buf, 17, target_component); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_ROLL_PITCH_YAW_THRUST, buf, MAVLINK_MSG_ID_SET_ROLL_PITCH_YAW_THRUST_LEN, MAVLINK_MSG_ID_SET_ROLL_PITCH_YAW_THRUST_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_ROLL_PITCH_YAW_THRUST, buf, MAVLINK_MSG_ID_SET_ROLL_PITCH_YAW_THRUST_LEN); +#endif +#else + mavlink_set_roll_pitch_yaw_thrust_t *packet = (mavlink_set_roll_pitch_yaw_thrust_t *)msgbuf; + packet->roll = roll; + packet->pitch = pitch; + packet->yaw = yaw; + packet->thrust = thrust; + packet->target_system = target_system; + packet->target_component = target_component; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_ROLL_PITCH_YAW_THRUST, (const char *)packet, MAVLINK_MSG_ID_SET_ROLL_PITCH_YAW_THRUST_LEN, MAVLINK_MSG_ID_SET_ROLL_PITCH_YAW_THRUST_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_ROLL_PITCH_YAW_THRUST, (const char *)packet, MAVLINK_MSG_ID_SET_ROLL_PITCH_YAW_THRUST_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SET_ROLL_PITCH_YAW_THRUST UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_setpoint_6dof.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_setpoint_6dof.h index 93ce345b6..90b63427b 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_setpoint_6dof.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_setpoint_6dof.h @@ -212,6 +212,50 @@ static inline void mavlink_msg_setpoint_6dof_send(mavlink_channel_t chan, uint8_ #endif } +#if MAVLINK_MSG_ID_SETPOINT_6DOF_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_setpoint_6dof_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, float trans_x, float trans_y, float trans_z, float rot_x, float rot_y, float rot_z) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, trans_x); + _mav_put_float(buf, 4, trans_y); + _mav_put_float(buf, 8, trans_z); + _mav_put_float(buf, 12, rot_x); + _mav_put_float(buf, 16, rot_y); + _mav_put_float(buf, 20, rot_z); + _mav_put_uint8_t(buf, 24, target_system); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SETPOINT_6DOF, buf, MAVLINK_MSG_ID_SETPOINT_6DOF_LEN, MAVLINK_MSG_ID_SETPOINT_6DOF_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SETPOINT_6DOF, buf, MAVLINK_MSG_ID_SETPOINT_6DOF_LEN); +#endif +#else + mavlink_setpoint_6dof_t *packet = (mavlink_setpoint_6dof_t *)msgbuf; + packet->trans_x = trans_x; + packet->trans_y = trans_y; + packet->trans_z = trans_z; + packet->rot_x = rot_x; + packet->rot_y = rot_y; + packet->rot_z = rot_z; + packet->target_system = target_system; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SETPOINT_6DOF, (const char *)packet, MAVLINK_MSG_ID_SETPOINT_6DOF_LEN, MAVLINK_MSG_ID_SETPOINT_6DOF_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SETPOINT_6DOF, (const char *)packet, MAVLINK_MSG_ID_SETPOINT_6DOF_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SETPOINT_6DOF UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_setpoint_8dof.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_setpoint_8dof.h index de80e4645..308a211cd 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_setpoint_8dof.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_setpoint_8dof.h @@ -234,6 +234,54 @@ static inline void mavlink_msg_setpoint_8dof_send(mavlink_channel_t chan, uint8_ #endif } +#if MAVLINK_MSG_ID_SETPOINT_8DOF_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_setpoint_8dof_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, float val1, float val2, float val3, float val4, float val5, float val6, float val7, float val8) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, val1); + _mav_put_float(buf, 4, val2); + _mav_put_float(buf, 8, val3); + _mav_put_float(buf, 12, val4); + _mav_put_float(buf, 16, val5); + _mav_put_float(buf, 20, val6); + _mav_put_float(buf, 24, val7); + _mav_put_float(buf, 28, val8); + _mav_put_uint8_t(buf, 32, target_system); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SETPOINT_8DOF, buf, MAVLINK_MSG_ID_SETPOINT_8DOF_LEN, MAVLINK_MSG_ID_SETPOINT_8DOF_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SETPOINT_8DOF, buf, MAVLINK_MSG_ID_SETPOINT_8DOF_LEN); +#endif +#else + mavlink_setpoint_8dof_t *packet = (mavlink_setpoint_8dof_t *)msgbuf; + packet->val1 = val1; + packet->val2 = val2; + packet->val3 = val3; + packet->val4 = val4; + packet->val5 = val5; + packet->val6 = val6; + packet->val7 = val7; + packet->val8 = val8; + packet->target_system = target_system; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SETPOINT_8DOF, (const char *)packet, MAVLINK_MSG_ID_SETPOINT_8DOF_LEN, MAVLINK_MSG_ID_SETPOINT_8DOF_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SETPOINT_8DOF, (const char *)packet, MAVLINK_MSG_ID_SETPOINT_8DOF_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SETPOINT_8DOF UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_sim_state.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_sim_state.h index ebd657cf3..db3a92642 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_sim_state.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_sim_state.h @@ -366,6 +366,78 @@ static inline void mavlink_msg_sim_state_send(mavlink_channel_t chan, float q1, #endif } +#if MAVLINK_MSG_ID_SIM_STATE_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_sim_state_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, float q1, float q2, float q3, float q4, float roll, float pitch, float yaw, float xacc, float yacc, float zacc, float xgyro, float ygyro, float zgyro, float lat, float lon, float alt, float std_dev_horz, float std_dev_vert, float vn, float ve, float vd) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, q1); + _mav_put_float(buf, 4, q2); + _mav_put_float(buf, 8, q3); + _mav_put_float(buf, 12, q4); + _mav_put_float(buf, 16, roll); + _mav_put_float(buf, 20, pitch); + _mav_put_float(buf, 24, yaw); + _mav_put_float(buf, 28, xacc); + _mav_put_float(buf, 32, yacc); + _mav_put_float(buf, 36, zacc); + _mav_put_float(buf, 40, xgyro); + _mav_put_float(buf, 44, ygyro); + _mav_put_float(buf, 48, zgyro); + _mav_put_float(buf, 52, lat); + _mav_put_float(buf, 56, lon); + _mav_put_float(buf, 60, alt); + _mav_put_float(buf, 64, std_dev_horz); + _mav_put_float(buf, 68, std_dev_vert); + _mav_put_float(buf, 72, vn); + _mav_put_float(buf, 76, ve); + _mav_put_float(buf, 80, vd); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SIM_STATE, buf, MAVLINK_MSG_ID_SIM_STATE_LEN, MAVLINK_MSG_ID_SIM_STATE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SIM_STATE, buf, MAVLINK_MSG_ID_SIM_STATE_LEN); +#endif +#else + mavlink_sim_state_t *packet = (mavlink_sim_state_t *)msgbuf; + packet->q1 = q1; + packet->q2 = q2; + packet->q3 = q3; + packet->q4 = q4; + packet->roll = roll; + packet->pitch = pitch; + packet->yaw = yaw; + packet->xacc = xacc; + packet->yacc = yacc; + packet->zacc = zacc; + packet->xgyro = xgyro; + packet->ygyro = ygyro; + packet->zgyro = zgyro; + packet->lat = lat; + packet->lon = lon; + packet->alt = alt; + packet->std_dev_horz = std_dev_horz; + packet->std_dev_vert = std_dev_vert; + packet->vn = vn; + packet->ve = ve; + packet->vd = vd; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SIM_STATE, (const char *)packet, MAVLINK_MSG_ID_SIM_STATE_LEN, MAVLINK_MSG_ID_SIM_STATE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SIM_STATE, (const char *)packet, MAVLINK_MSG_ID_SIM_STATE_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SIM_STATE UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_state_correction.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_state_correction.h index 2db627b96..be2629dd8 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_state_correction.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_state_correction.h @@ -234,6 +234,54 @@ static inline void mavlink_msg_state_correction_send(mavlink_channel_t chan, flo #endif } +#if MAVLINK_MSG_ID_STATE_CORRECTION_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_state_correction_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, float xErr, float yErr, float zErr, float rollErr, float pitchErr, float yawErr, float vxErr, float vyErr, float vzErr) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, xErr); + _mav_put_float(buf, 4, yErr); + _mav_put_float(buf, 8, zErr); + _mav_put_float(buf, 12, rollErr); + _mav_put_float(buf, 16, pitchErr); + _mav_put_float(buf, 20, yawErr); + _mav_put_float(buf, 24, vxErr); + _mav_put_float(buf, 28, vyErr); + _mav_put_float(buf, 32, vzErr); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_STATE_CORRECTION, buf, MAVLINK_MSG_ID_STATE_CORRECTION_LEN, MAVLINK_MSG_ID_STATE_CORRECTION_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_STATE_CORRECTION, buf, MAVLINK_MSG_ID_STATE_CORRECTION_LEN); +#endif +#else + mavlink_state_correction_t *packet = (mavlink_state_correction_t *)msgbuf; + packet->xErr = xErr; + packet->yErr = yErr; + packet->zErr = zErr; + packet->rollErr = rollErr; + packet->pitchErr = pitchErr; + packet->yawErr = yawErr; + packet->vxErr = vxErr; + packet->vyErr = vyErr; + packet->vzErr = vzErr; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_STATE_CORRECTION, (const char *)packet, MAVLINK_MSG_ID_STATE_CORRECTION_LEN, MAVLINK_MSG_ID_STATE_CORRECTION_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_STATE_CORRECTION, (const char *)packet, MAVLINK_MSG_ID_STATE_CORRECTION_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE STATE_CORRECTION UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_statustext.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_statustext.h index 536ca0634..c8c2547b3 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_statustext.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_statustext.h @@ -151,6 +151,38 @@ static inline void mavlink_msg_statustext_send(mavlink_channel_t chan, uint8_t s #endif } +#if MAVLINK_MSG_ID_STATUSTEXT_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_statustext_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t severity, const char *text) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint8_t(buf, 0, severity); + _mav_put_char_array(buf, 1, text, 50); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_STATUSTEXT, buf, MAVLINK_MSG_ID_STATUSTEXT_LEN, MAVLINK_MSG_ID_STATUSTEXT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_STATUSTEXT, buf, MAVLINK_MSG_ID_STATUSTEXT_LEN); +#endif +#else + mavlink_statustext_t *packet = (mavlink_statustext_t *)msgbuf; + packet->severity = severity; + mav_array_memcpy(packet->text, text, sizeof(char)*50); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_STATUSTEXT, (const char *)packet, MAVLINK_MSG_ID_STATUSTEXT_LEN, MAVLINK_MSG_ID_STATUSTEXT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_STATUSTEXT, (const char *)packet, MAVLINK_MSG_ID_STATUSTEXT_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE STATUSTEXT UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_sys_status.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_sys_status.h index 101b36678..1b1730d5f 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_sys_status.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_sys_status.h @@ -278,6 +278,62 @@ static inline void mavlink_msg_sys_status_send(mavlink_channel_t chan, uint32_t #endif } +#if MAVLINK_MSG_ID_SYS_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_sys_status_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint32_t onboard_control_sensors_present, uint32_t onboard_control_sensors_enabled, uint32_t onboard_control_sensors_health, uint16_t load, uint16_t voltage_battery, int16_t current_battery, int8_t battery_remaining, uint16_t drop_rate_comm, uint16_t errors_comm, uint16_t errors_count1, uint16_t errors_count2, uint16_t errors_count3, uint16_t errors_count4) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, onboard_control_sensors_present); + _mav_put_uint32_t(buf, 4, onboard_control_sensors_enabled); + _mav_put_uint32_t(buf, 8, onboard_control_sensors_health); + _mav_put_uint16_t(buf, 12, load); + _mav_put_uint16_t(buf, 14, voltage_battery); + _mav_put_int16_t(buf, 16, current_battery); + _mav_put_uint16_t(buf, 18, drop_rate_comm); + _mav_put_uint16_t(buf, 20, errors_comm); + _mav_put_uint16_t(buf, 22, errors_count1); + _mav_put_uint16_t(buf, 24, errors_count2); + _mav_put_uint16_t(buf, 26, errors_count3); + _mav_put_uint16_t(buf, 28, errors_count4); + _mav_put_int8_t(buf, 30, battery_remaining); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SYS_STATUS, buf, MAVLINK_MSG_ID_SYS_STATUS_LEN, MAVLINK_MSG_ID_SYS_STATUS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SYS_STATUS, buf, MAVLINK_MSG_ID_SYS_STATUS_LEN); +#endif +#else + mavlink_sys_status_t *packet = (mavlink_sys_status_t *)msgbuf; + packet->onboard_control_sensors_present = onboard_control_sensors_present; + packet->onboard_control_sensors_enabled = onboard_control_sensors_enabled; + packet->onboard_control_sensors_health = onboard_control_sensors_health; + packet->load = load; + packet->voltage_battery = voltage_battery; + packet->current_battery = current_battery; + packet->drop_rate_comm = drop_rate_comm; + packet->errors_comm = errors_comm; + packet->errors_count1 = errors_count1; + packet->errors_count2 = errors_count2; + packet->errors_count3 = errors_count3; + packet->errors_count4 = errors_count4; + packet->battery_remaining = battery_remaining; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SYS_STATUS, (const char *)packet, MAVLINK_MSG_ID_SYS_STATUS_LEN, MAVLINK_MSG_ID_SYS_STATUS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SYS_STATUS, (const char *)packet, MAVLINK_MSG_ID_SYS_STATUS_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SYS_STATUS UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_system_time.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_system_time.h index 1807567ae..988c669c3 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_system_time.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_system_time.h @@ -157,6 +157,40 @@ static inline void mavlink_msg_system_time_send(mavlink_channel_t chan, uint64_t #endif } +#if MAVLINK_MSG_ID_SYSTEM_TIME_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_system_time_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint64_t time_unix_usec, uint32_t time_boot_ms) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint64_t(buf, 0, time_unix_usec); + _mav_put_uint32_t(buf, 8, time_boot_ms); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SYSTEM_TIME, buf, MAVLINK_MSG_ID_SYSTEM_TIME_LEN, MAVLINK_MSG_ID_SYSTEM_TIME_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SYSTEM_TIME, buf, MAVLINK_MSG_ID_SYSTEM_TIME_LEN); +#endif +#else + mavlink_system_time_t *packet = (mavlink_system_time_t *)msgbuf; + packet->time_unix_usec = time_unix_usec; + packet->time_boot_ms = time_boot_ms; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SYSTEM_TIME, (const char *)packet, MAVLINK_MSG_ID_SYSTEM_TIME_LEN, MAVLINK_MSG_ID_SYSTEM_TIME_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SYSTEM_TIME, (const char *)packet, MAVLINK_MSG_ID_SYSTEM_TIME_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SYSTEM_TIME UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_vfr_hud.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_vfr_hud.h index 5b1093a3d..b130ee50b 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_vfr_hud.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_vfr_hud.h @@ -201,6 +201,48 @@ static inline void mavlink_msg_vfr_hud_send(mavlink_channel_t chan, float airspe #endif } +#if MAVLINK_MSG_ID_VFR_HUD_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_vfr_hud_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, float airspeed, float groundspeed, int16_t heading, uint16_t throttle, float alt, float climb) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, airspeed); + _mav_put_float(buf, 4, groundspeed); + _mav_put_float(buf, 8, alt); + _mav_put_float(buf, 12, climb); + _mav_put_int16_t(buf, 16, heading); + _mav_put_uint16_t(buf, 18, throttle); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_VFR_HUD, buf, MAVLINK_MSG_ID_VFR_HUD_LEN, MAVLINK_MSG_ID_VFR_HUD_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_VFR_HUD, buf, MAVLINK_MSG_ID_VFR_HUD_LEN); +#endif +#else + mavlink_vfr_hud_t *packet = (mavlink_vfr_hud_t *)msgbuf; + packet->airspeed = airspeed; + packet->groundspeed = groundspeed; + packet->alt = alt; + packet->climb = climb; + packet->heading = heading; + packet->throttle = throttle; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_VFR_HUD, (const char *)packet, MAVLINK_MSG_ID_VFR_HUD_LEN, MAVLINK_MSG_ID_VFR_HUD_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_VFR_HUD, (const char *)packet, MAVLINK_MSG_ID_VFR_HUD_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE VFR_HUD UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_vicon_position_estimate.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_vicon_position_estimate.h index a254202e4..b3fa7bc1c 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_vicon_position_estimate.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_vicon_position_estimate.h @@ -212,6 +212,50 @@ static inline void mavlink_msg_vicon_position_estimate_send(mavlink_channel_t ch #endif } +#if MAVLINK_MSG_ID_VICON_POSITION_ESTIMATE_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_vicon_position_estimate_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint64_t usec, float x, float y, float z, float roll, float pitch, float yaw) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint64_t(buf, 0, usec); + _mav_put_float(buf, 8, x); + _mav_put_float(buf, 12, y); + _mav_put_float(buf, 16, z); + _mav_put_float(buf, 20, roll); + _mav_put_float(buf, 24, pitch); + _mav_put_float(buf, 28, yaw); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_VICON_POSITION_ESTIMATE, buf, MAVLINK_MSG_ID_VICON_POSITION_ESTIMATE_LEN, MAVLINK_MSG_ID_VICON_POSITION_ESTIMATE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_VICON_POSITION_ESTIMATE, buf, MAVLINK_MSG_ID_VICON_POSITION_ESTIMATE_LEN); +#endif +#else + mavlink_vicon_position_estimate_t *packet = (mavlink_vicon_position_estimate_t *)msgbuf; + packet->usec = usec; + packet->x = x; + packet->y = y; + packet->z = z; + packet->roll = roll; + packet->pitch = pitch; + packet->yaw = yaw; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_VICON_POSITION_ESTIMATE, (const char *)packet, MAVLINK_MSG_ID_VICON_POSITION_ESTIMATE_LEN, MAVLINK_MSG_ID_VICON_POSITION_ESTIMATE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_VICON_POSITION_ESTIMATE, (const char *)packet, MAVLINK_MSG_ID_VICON_POSITION_ESTIMATE_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE VICON_POSITION_ESTIMATE UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_vision_position_estimate.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_vision_position_estimate.h index f7a741b09..8f82fb682 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_vision_position_estimate.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_vision_position_estimate.h @@ -212,6 +212,50 @@ static inline void mavlink_msg_vision_position_estimate_send(mavlink_channel_t c #endif } +#if MAVLINK_MSG_ID_VISION_POSITION_ESTIMATE_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_vision_position_estimate_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint64_t usec, float x, float y, float z, float roll, float pitch, float yaw) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint64_t(buf, 0, usec); + _mav_put_float(buf, 8, x); + _mav_put_float(buf, 12, y); + _mav_put_float(buf, 16, z); + _mav_put_float(buf, 20, roll); + _mav_put_float(buf, 24, pitch); + _mav_put_float(buf, 28, yaw); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_VISION_POSITION_ESTIMATE, buf, MAVLINK_MSG_ID_VISION_POSITION_ESTIMATE_LEN, MAVLINK_MSG_ID_VISION_POSITION_ESTIMATE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_VISION_POSITION_ESTIMATE, buf, MAVLINK_MSG_ID_VISION_POSITION_ESTIMATE_LEN); +#endif +#else + mavlink_vision_position_estimate_t *packet = (mavlink_vision_position_estimate_t *)msgbuf; + packet->usec = usec; + packet->x = x; + packet->y = y; + packet->z = z; + packet->roll = roll; + packet->pitch = pitch; + packet->yaw = yaw; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_VISION_POSITION_ESTIMATE, (const char *)packet, MAVLINK_MSG_ID_VISION_POSITION_ESTIMATE_LEN, MAVLINK_MSG_ID_VISION_POSITION_ESTIMATE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_VISION_POSITION_ESTIMATE, (const char *)packet, MAVLINK_MSG_ID_VISION_POSITION_ESTIMATE_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE VISION_POSITION_ESTIMATE UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_vision_speed_estimate.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_vision_speed_estimate.h index 660225128..7528014c7 100644 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_vision_speed_estimate.h +++ b/mavlink/include/mavlink/v1.0/common/mavlink_msg_vision_speed_estimate.h @@ -179,6 +179,44 @@ static inline void mavlink_msg_vision_speed_estimate_send(mavlink_channel_t chan #endif } +#if MAVLINK_MSG_ID_VISION_SPEED_ESTIMATE_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_vision_speed_estimate_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint64_t usec, float x, float y, float z) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint64_t(buf, 0, usec); + _mav_put_float(buf, 8, x); + _mav_put_float(buf, 12, y); + _mav_put_float(buf, 16, z); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_VISION_SPEED_ESTIMATE, buf, MAVLINK_MSG_ID_VISION_SPEED_ESTIMATE_LEN, MAVLINK_MSG_ID_VISION_SPEED_ESTIMATE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_VISION_SPEED_ESTIMATE, buf, MAVLINK_MSG_ID_VISION_SPEED_ESTIMATE_LEN); +#endif +#else + mavlink_vision_speed_estimate_t *packet = (mavlink_vision_speed_estimate_t *)msgbuf; + packet->usec = usec; + packet->x = x; + packet->y = y; + packet->z = z; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_VISION_SPEED_ESTIMATE, (const char *)packet, MAVLINK_MSG_ID_VISION_SPEED_ESTIMATE_LEN, MAVLINK_MSG_ID_VISION_SPEED_ESTIMATE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_VISION_SPEED_ESTIMATE, (const char *)packet, MAVLINK_MSG_ID_VISION_SPEED_ESTIMATE_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE VISION_SPEED_ESTIMATE UNPACKING diff --git a/mavlink/include/mavlink/v1.0/common/testsuite.h b/mavlink/include/mavlink/v1.0/common/testsuite.h index c5aa9ddf3..de23fcb2a 100644 --- a/mavlink/include/mavlink/v1.0/common/testsuite.h +++ b/mavlink/include/mavlink/v1.0/common/testsuite.h @@ -2805,6 +2805,89 @@ static void mavlink_test_state_correction(uint8_t system_id, uint8_t component_i MAVLINK_ASSERT(memcmp(&packet1, &packet2, sizeof(packet1)) == 0); } +static void mavlink_test_rc_channels(uint8_t system_id, uint8_t component_id, mavlink_message_t *last_msg) +{ + mavlink_message_t msg; + uint8_t buffer[MAVLINK_MAX_PACKET_LEN]; + uint16_t i; + mavlink_rc_channels_t packet_in = { + 963497464, + }17443, + }17547, + }17651, + }17755, + }17859, + }17963, + }18067, + }18171, + }18275, + }18379, + }18483, + }18587, + }18691, + }18795, + }18899, + }19003, + }19107, + }19211, + }125, + }192, + }; + mavlink_rc_channels_t packet1, packet2; + memset(&packet1, 0, sizeof(packet1)); + packet1.time_boot_ms = packet_in.time_boot_ms; + packet1.chan1_raw = packet_in.chan1_raw; + packet1.chan2_raw = packet_in.chan2_raw; + packet1.chan3_raw = packet_in.chan3_raw; + packet1.chan4_raw = packet_in.chan4_raw; + packet1.chan5_raw = packet_in.chan5_raw; + packet1.chan6_raw = packet_in.chan6_raw; + packet1.chan7_raw = packet_in.chan7_raw; + packet1.chan8_raw = packet_in.chan8_raw; + packet1.chan9_raw = packet_in.chan9_raw; + packet1.chan10_raw = packet_in.chan10_raw; + packet1.chan11_raw = packet_in.chan11_raw; + packet1.chan12_raw = packet_in.chan12_raw; + packet1.chan13_raw = packet_in.chan13_raw; + packet1.chan14_raw = packet_in.chan14_raw; + packet1.chan15_raw = packet_in.chan15_raw; + packet1.chan16_raw = packet_in.chan16_raw; + packet1.chan17_raw = packet_in.chan17_raw; + packet1.chan18_raw = packet_in.chan18_raw; + packet1.chancount = packet_in.chancount; + packet1.rssi = packet_in.rssi; + + + + memset(&packet2, 0, sizeof(packet2)); + mavlink_msg_rc_channels_encode(system_id, component_id, &msg, &packet1); + mavlink_msg_rc_channels_decode(&msg, &packet2); + MAVLINK_ASSERT(memcmp(&packet1, &packet2, sizeof(packet1)) == 0); + + memset(&packet2, 0, sizeof(packet2)); + mavlink_msg_rc_channels_pack(system_id, component_id, &msg , packet1.time_boot_ms , packet1.chancount , packet1.chan1_raw , packet1.chan2_raw , packet1.chan3_raw , packet1.chan4_raw , packet1.chan5_raw , packet1.chan6_raw , packet1.chan7_raw , packet1.chan8_raw , packet1.chan9_raw , packet1.chan10_raw , packet1.chan11_raw , packet1.chan12_raw , packet1.chan13_raw , packet1.chan14_raw , packet1.chan15_raw , packet1.chan16_raw , packet1.chan17_raw , packet1.chan18_raw , packet1.rssi ); + mavlink_msg_rc_channels_decode(&msg, &packet2); + MAVLINK_ASSERT(memcmp(&packet1, &packet2, sizeof(packet1)) == 0); + + memset(&packet2, 0, sizeof(packet2)); + mavlink_msg_rc_channels_pack_chan(system_id, component_id, MAVLINK_COMM_0, &msg , packet1.time_boot_ms , packet1.chancount , packet1.chan1_raw , packet1.chan2_raw , packet1.chan3_raw , packet1.chan4_raw , packet1.chan5_raw , packet1.chan6_raw , packet1.chan7_raw , packet1.chan8_raw , packet1.chan9_raw , packet1.chan10_raw , packet1.chan11_raw , packet1.chan12_raw , packet1.chan13_raw , packet1.chan14_raw , packet1.chan15_raw , packet1.chan16_raw , packet1.chan17_raw , packet1.chan18_raw , packet1.rssi ); + mavlink_msg_rc_channels_decode(&msg, &packet2); + MAVLINK_ASSERT(memcmp(&packet1, &packet2, sizeof(packet1)) == 0); + + memset(&packet2, 0, sizeof(packet2)); + mavlink_msg_to_send_buffer(buffer, &msg); + for (i=0; i<mavlink_msg_get_send_buffer_length(&msg); i++) { + comm_send_ch(MAVLINK_COMM_0, buffer[i]); + } + mavlink_msg_rc_channels_decode(last_msg, &packet2); + MAVLINK_ASSERT(memcmp(&packet1, &packet2, sizeof(packet1)) == 0); + + memset(&packet2, 0, sizeof(packet2)); + mavlink_msg_rc_channels_send(MAVLINK_COMM_1 , packet1.time_boot_ms , packet1.chancount , packet1.chan1_raw , packet1.chan2_raw , packet1.chan3_raw , packet1.chan4_raw , packet1.chan5_raw , packet1.chan6_raw , packet1.chan7_raw , packet1.chan8_raw , packet1.chan9_raw , packet1.chan10_raw , packet1.chan11_raw , packet1.chan12_raw , packet1.chan13_raw , packet1.chan14_raw , packet1.chan15_raw , packet1.chan16_raw , packet1.chan17_raw , packet1.chan18_raw , packet1.rssi ); + mavlink_msg_rc_channels_decode(last_msg, &packet2); + MAVLINK_ASSERT(memcmp(&packet1, &packet2, sizeof(packet1)) == 0); +} + static void mavlink_test_request_data_stream(uint8_t system_id, uint8_t component_id, mavlink_message_t *last_msg) { mavlink_message_t msg; @@ -4953,6 +5036,106 @@ static void mavlink_test_gps2_raw(uint8_t system_id, uint8_t component_id, mavli MAVLINK_ASSERT(memcmp(&packet1, &packet2, sizeof(packet1)) == 0); } +static void mavlink_test_power_status(uint8_t system_id, uint8_t component_id, mavlink_message_t *last_msg) +{ + mavlink_message_t msg; + uint8_t buffer[MAVLINK_MAX_PACKET_LEN]; + uint16_t i; + mavlink_power_status_t packet_in = { + 17235, + }17339, + }17443, + }; + mavlink_power_status_t packet1, packet2; + memset(&packet1, 0, sizeof(packet1)); + packet1.Vcc = packet_in.Vcc; + packet1.Vservo = packet_in.Vservo; + packet1.flags = packet_in.flags; + + + + memset(&packet2, 0, sizeof(packet2)); + mavlink_msg_power_status_encode(system_id, component_id, &msg, &packet1); + mavlink_msg_power_status_decode(&msg, &packet2); + MAVLINK_ASSERT(memcmp(&packet1, &packet2, sizeof(packet1)) == 0); + + memset(&packet2, 0, sizeof(packet2)); + mavlink_msg_power_status_pack(system_id, component_id, &msg , packet1.Vcc , packet1.Vservo , packet1.flags ); + mavlink_msg_power_status_decode(&msg, &packet2); + MAVLINK_ASSERT(memcmp(&packet1, &packet2, sizeof(packet1)) == 0); + + memset(&packet2, 0, sizeof(packet2)); + mavlink_msg_power_status_pack_chan(system_id, component_id, MAVLINK_COMM_0, &msg , packet1.Vcc , packet1.Vservo , packet1.flags ); + mavlink_msg_power_status_decode(&msg, &packet2); + MAVLINK_ASSERT(memcmp(&packet1, &packet2, sizeof(packet1)) == 0); + + memset(&packet2, 0, sizeof(packet2)); + mavlink_msg_to_send_buffer(buffer, &msg); + for (i=0; i<mavlink_msg_get_send_buffer_length(&msg); i++) { + comm_send_ch(MAVLINK_COMM_0, buffer[i]); + } + mavlink_msg_power_status_decode(last_msg, &packet2); + MAVLINK_ASSERT(memcmp(&packet1, &packet2, sizeof(packet1)) == 0); + + memset(&packet2, 0, sizeof(packet2)); + mavlink_msg_power_status_send(MAVLINK_COMM_1 , packet1.Vcc , packet1.Vservo , packet1.flags ); + mavlink_msg_power_status_decode(last_msg, &packet2); + MAVLINK_ASSERT(memcmp(&packet1, &packet2, sizeof(packet1)) == 0); +} + +static void mavlink_test_serial_control(uint8_t system_id, uint8_t component_id, mavlink_message_t *last_msg) +{ + mavlink_message_t msg; + uint8_t buffer[MAVLINK_MAX_PACKET_LEN]; + uint16_t i; + mavlink_serial_control_t packet_in = { + 963497464, + }17443, + }151, + }218, + }29, + }{ 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, 160, 161, 162, 163, 164, 165 }, + }; + mavlink_serial_control_t packet1, packet2; + memset(&packet1, 0, sizeof(packet1)); + packet1.baudrate = packet_in.baudrate; + packet1.timeout = packet_in.timeout; + packet1.device = packet_in.device; + packet1.flags = packet_in.flags; + packet1.count = packet_in.count; + + mav_array_memcpy(packet1.data, packet_in.data, sizeof(uint8_t)*70); + + + memset(&packet2, 0, sizeof(packet2)); + mavlink_msg_serial_control_encode(system_id, component_id, &msg, &packet1); + mavlink_msg_serial_control_decode(&msg, &packet2); + MAVLINK_ASSERT(memcmp(&packet1, &packet2, sizeof(packet1)) == 0); + + memset(&packet2, 0, sizeof(packet2)); + mavlink_msg_serial_control_pack(system_id, component_id, &msg , packet1.device , packet1.flags , packet1.timeout , packet1.baudrate , packet1.count , packet1.data ); + mavlink_msg_serial_control_decode(&msg, &packet2); + MAVLINK_ASSERT(memcmp(&packet1, &packet2, sizeof(packet1)) == 0); + + memset(&packet2, 0, sizeof(packet2)); + mavlink_msg_serial_control_pack_chan(system_id, component_id, MAVLINK_COMM_0, &msg , packet1.device , packet1.flags , packet1.timeout , packet1.baudrate , packet1.count , packet1.data ); + mavlink_msg_serial_control_decode(&msg, &packet2); + MAVLINK_ASSERT(memcmp(&packet1, &packet2, sizeof(packet1)) == 0); + + memset(&packet2, 0, sizeof(packet2)); + mavlink_msg_to_send_buffer(buffer, &msg); + for (i=0; i<mavlink_msg_get_send_buffer_length(&msg); i++) { + comm_send_ch(MAVLINK_COMM_0, buffer[i]); + } + mavlink_msg_serial_control_decode(last_msg, &packet2); + MAVLINK_ASSERT(memcmp(&packet1, &packet2, sizeof(packet1)) == 0); + + memset(&packet2, 0, sizeof(packet2)); + mavlink_msg_serial_control_send(MAVLINK_COMM_1 , packet1.device , packet1.flags , packet1.timeout , packet1.baudrate , packet1.count , packet1.data ); + mavlink_msg_serial_control_decode(last_msg, &packet2); + MAVLINK_ASSERT(memcmp(&packet1, &packet2, sizeof(packet1)) == 0); +} + static void mavlink_test_data_transmission_handshake(uint8_t system_id, uint8_t component_id, mavlink_message_t *last_msg) { mavlink_message_t msg; @@ -5053,6 +5236,63 @@ static void mavlink_test_encapsulated_data(uint8_t system_id, uint8_t component_ MAVLINK_ASSERT(memcmp(&packet1, &packet2, sizeof(packet1)) == 0); } +static void mavlink_test_distance_sensor(uint8_t system_id, uint8_t component_id, mavlink_message_t *last_msg) +{ + mavlink_message_t msg; + uint8_t buffer[MAVLINK_MAX_PACKET_LEN]; + uint16_t i; + mavlink_distance_sensor_t packet_in = { + 963497464, + }17443, + }17547, + }17651, + }163, + }230, + }41, + }108, + }; + mavlink_distance_sensor_t packet1, packet2; + memset(&packet1, 0, sizeof(packet1)); + packet1.time_boot_ms = packet_in.time_boot_ms; + packet1.min_distance = packet_in.min_distance; + packet1.max_distance = packet_in.max_distance; + packet1.current_distance = packet_in.current_distance; + packet1.type = packet_in.type; + packet1.id = packet_in.id; + packet1.orientation = packet_in.orientation; + packet1.covariance = packet_in.covariance; + + + + memset(&packet2, 0, sizeof(packet2)); + mavlink_msg_distance_sensor_encode(system_id, component_id, &msg, &packet1); + mavlink_msg_distance_sensor_decode(&msg, &packet2); + MAVLINK_ASSERT(memcmp(&packet1, &packet2, sizeof(packet1)) == 0); + + memset(&packet2, 0, sizeof(packet2)); + mavlink_msg_distance_sensor_pack(system_id, component_id, &msg , packet1.time_boot_ms , packet1.type , packet1.id , packet1.orientation , packet1.min_distance , packet1.max_distance , packet1.current_distance , packet1.covariance ); + mavlink_msg_distance_sensor_decode(&msg, &packet2); + MAVLINK_ASSERT(memcmp(&packet1, &packet2, sizeof(packet1)) == 0); + + memset(&packet2, 0, sizeof(packet2)); + mavlink_msg_distance_sensor_pack_chan(system_id, component_id, MAVLINK_COMM_0, &msg , packet1.time_boot_ms , packet1.type , packet1.id , packet1.orientation , packet1.min_distance , packet1.max_distance , packet1.current_distance , packet1.covariance ); + mavlink_msg_distance_sensor_decode(&msg, &packet2); + MAVLINK_ASSERT(memcmp(&packet1, &packet2, sizeof(packet1)) == 0); + + memset(&packet2, 0, sizeof(packet2)); + mavlink_msg_to_send_buffer(buffer, &msg); + for (i=0; i<mavlink_msg_get_send_buffer_length(&msg); i++) { + comm_send_ch(MAVLINK_COMM_0, buffer[i]); + } + mavlink_msg_distance_sensor_decode(last_msg, &packet2); + MAVLINK_ASSERT(memcmp(&packet1, &packet2, sizeof(packet1)) == 0); + + memset(&packet2, 0, sizeof(packet2)); + mavlink_msg_distance_sensor_send(MAVLINK_COMM_1 , packet1.time_boot_ms , packet1.type , packet1.id , packet1.orientation , packet1.min_distance , packet1.max_distance , packet1.current_distance , packet1.covariance ); + mavlink_msg_distance_sensor_decode(last_msg, &packet2); + MAVLINK_ASSERT(memcmp(&packet1, &packet2, sizeof(packet1)) == 0); +} + static void mavlink_test_battery_status(uint8_t system_id, uint8_t component_id, mavlink_message_t *last_msg) { mavlink_message_t msg; @@ -5571,6 +5811,7 @@ static void mavlink_test_common(uint8_t system_id, uint8_t component_id, mavlink mavlink_test_nav_controller_output(system_id, component_id, last_msg); mavlink_test_set_quad_swarm_led_roll_pitch_yaw_thrust(system_id, component_id, last_msg); mavlink_test_state_correction(system_id, component_id, last_msg); + mavlink_test_rc_channels(system_id, component_id, last_msg); mavlink_test_request_data_stream(system_id, component_id, last_msg); mavlink_test_data_stream(system_id, component_id, last_msg); mavlink_test_manual_control(system_id, component_id, last_msg); @@ -5609,8 +5850,11 @@ static void mavlink_test_common(uint8_t system_id, uint8_t component_id, mavlink mavlink_test_log_request_end(system_id, component_id, last_msg); mavlink_test_gps_inject_data(system_id, component_id, last_msg); mavlink_test_gps2_raw(system_id, component_id, last_msg); + mavlink_test_power_status(system_id, component_id, last_msg); + mavlink_test_serial_control(system_id, component_id, last_msg); mavlink_test_data_transmission_handshake(system_id, component_id, last_msg); mavlink_test_encapsulated_data(system_id, component_id, last_msg); + mavlink_test_distance_sensor(system_id, component_id, last_msg); mavlink_test_battery_status(system_id, component_id, last_msg); mavlink_test_setpoint_8dof(system_id, component_id, last_msg); mavlink_test_setpoint_6dof(system_id, component_id, last_msg); diff --git a/mavlink/include/mavlink/v1.0/common/version.h b/mavlink/include/mavlink/v1.0/common/version.h index 2f3736f45..8ad378355 100644 --- a/mavlink/include/mavlink/v1.0/common/version.h +++ b/mavlink/include/mavlink/v1.0/common/version.h @@ -5,7 +5,7 @@ #ifndef MAVLINK_VERSION_H #define MAVLINK_VERSION_H -#define MAVLINK_BUILD_DATE "Tue Feb 4 15:28:29 2014" +#define MAVLINK_BUILD_DATE "Sun Apr 13 09:39:04 2014" #define MAVLINK_WIRE_PROTOCOL_VERSION "1.0" #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255 diff --git a/mavlink/include/mavlink/v1.0/matrixpilot/matrixpilot.h b/mavlink/include/mavlink/v1.0/matrixpilot/matrixpilot.h index 2f15d31c4..cc7545cfe 100644 --- a/mavlink/include/mavlink/v1.0/matrixpilot/matrixpilot.h +++ b/mavlink/include/mavlink/v1.0/matrixpilot/matrixpilot.h @@ -12,15 +12,15 @@ extern "C" { // MESSAGE LENGTHS AND CRCS #ifndef MAVLINK_MESSAGE_LENGTHS -#define MAVLINK_MESSAGE_LENGTHS {9, 31, 12, 0, 14, 28, 3, 32, 0, 0, 0, 6, 0, 0, 0, 0, 0, 0, 0, 0, 20, 2, 25, 23, 30, 101, 22, 26, 16, 14, 28, 32, 28, 28, 22, 22, 21, 6, 6, 37, 4, 4, 2, 2, 4, 2, 2, 3, 13, 12, 19, 17, 15, 15, 27, 25, 18, 18, 20, 20, 9, 34, 26, 46, 36, 0, 6, 4, 0, 11, 18, 0, 0, 0, 20, 0, 33, 3, 0, 0, 20, 22, 0, 0, 0, 0, 0, 0, 0, 28, 56, 42, 33, 0, 0, 0, 0, 0, 0, 0, 26, 32, 32, 20, 32, 62, 54, 64, 84, 9, 254, 249, 9, 36, 26, 64, 22, 6, 14, 12, 97, 2, 2, 113, 35, 0, 0, 0, 0, 0, 13, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 24, 33, 25, 2, 6, 58, 6, 0, 53, 7, 3, 4, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 63, 70, 10, 24, 20, 24, 28, 14, 17, 60, 110, 28, 16, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 36, 30, 18, 18, 51, 9, 0} +#define MAVLINK_MESSAGE_LENGTHS {9, 31, 12, 0, 14, 28, 3, 32, 0, 0, 0, 6, 0, 0, 0, 0, 0, 0, 0, 0, 20, 2, 25, 23, 30, 101, 22, 26, 16, 14, 28, 32, 28, 28, 22, 22, 21, 6, 6, 37, 4, 4, 2, 2, 4, 2, 2, 3, 13, 12, 19, 17, 15, 15, 27, 25, 18, 18, 20, 20, 9, 34, 26, 46, 36, 42, 6, 4, 0, 11, 18, 0, 0, 0, 20, 0, 33, 3, 0, 0, 20, 22, 0, 0, 0, 0, 0, 0, 0, 28, 56, 42, 33, 0, 0, 0, 0, 0, 0, 0, 26, 32, 32, 20, 32, 62, 54, 64, 84, 9, 254, 249, 9, 36, 26, 64, 22, 6, 14, 12, 97, 2, 2, 113, 35, 6, 79, 0, 0, 0, 13, 255, 14, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 24, 33, 25, 2, 6, 58, 6, 0, 53, 7, 3, 4, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 63, 70, 10, 24, 20, 24, 28, 14, 17, 60, 110, 28, 16, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 36, 30, 18, 18, 51, 9, 0} #endif #ifndef MAVLINK_MESSAGE_CRCS -#define MAVLINK_MESSAGE_CRCS {50, 124, 137, 0, 237, 217, 104, 119, 0, 0, 0, 89, 0, 0, 0, 0, 0, 0, 0, 0, 214, 159, 220, 168, 24, 23, 170, 144, 67, 115, 39, 246, 185, 104, 237, 244, 222, 212, 9, 254, 230, 28, 28, 132, 221, 232, 11, 153, 41, 39, 214, 223, 141, 33, 15, 3, 100, 24, 239, 238, 30, 240, 183, 130, 130, 0, 148, 21, 0, 243, 124, 0, 0, 0, 20, 0, 152, 143, 0, 0, 127, 106, 0, 0, 0, 0, 0, 0, 0, 231, 183, 63, 54, 0, 0, 0, 0, 0, 0, 0, 175, 102, 158, 208, 56, 93, 211, 108, 32, 185, 235, 93, 124, 124, 119, 4, 76, 128, 56, 116, 134, 237, 203, 250, 87, 0, 0, 0, 0, 0, 29, 223, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 177, 241, 15, 181, 26, 101, 109, 0, 12, 218, 133, 208, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 150, 169, 191, 121, 54, 171, 142, 249, 123, 7, 222, 55, 154, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 204, 49, 170, 44, 83, 46, 0} +#define MAVLINK_MESSAGE_CRCS {50, 124, 137, 0, 237, 217, 104, 119, 0, 0, 0, 89, 0, 0, 0, 0, 0, 0, 0, 0, 214, 159, 220, 168, 24, 23, 170, 144, 67, 115, 39, 246, 185, 104, 237, 244, 222, 212, 9, 254, 230, 28, 28, 132, 221, 232, 11, 153, 41, 39, 214, 223, 141, 33, 15, 3, 100, 24, 239, 238, 30, 240, 183, 130, 130, 118, 148, 21, 0, 243, 124, 0, 0, 0, 20, 0, 152, 143, 0, 0, 127, 106, 0, 0, 0, 0, 0, 0, 0, 231, 183, 63, 54, 0, 0, 0, 0, 0, 0, 0, 175, 102, 158, 208, 56, 93, 211, 108, 32, 185, 235, 93, 124, 124, 119, 4, 76, 128, 56, 116, 134, 237, 203, 250, 87, 203, 220, 0, 0, 0, 29, 223, 85, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 177, 241, 15, 181, 26, 101, 109, 0, 12, 218, 133, 208, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 150, 169, 191, 121, 54, 171, 142, 249, 123, 7, 222, 55, 154, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 204, 49, 170, 44, 83, 46, 0} #endif #ifndef MAVLINK_MESSAGE_INFO -#define MAVLINK_MESSAGE_INFO {MAVLINK_MESSAGE_INFO_HEARTBEAT, MAVLINK_MESSAGE_INFO_SYS_STATUS, MAVLINK_MESSAGE_INFO_SYSTEM_TIME, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_PING, MAVLINK_MESSAGE_INFO_CHANGE_OPERATOR_CONTROL, MAVLINK_MESSAGE_INFO_CHANGE_OPERATOR_CONTROL_ACK, MAVLINK_MESSAGE_INFO_AUTH_KEY, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_SET_MODE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_PARAM_REQUEST_READ, MAVLINK_MESSAGE_INFO_PARAM_REQUEST_LIST, MAVLINK_MESSAGE_INFO_PARAM_VALUE, MAVLINK_MESSAGE_INFO_PARAM_SET, MAVLINK_MESSAGE_INFO_GPS_RAW_INT, MAVLINK_MESSAGE_INFO_GPS_STATUS, MAVLINK_MESSAGE_INFO_SCALED_IMU, MAVLINK_MESSAGE_INFO_RAW_IMU, MAVLINK_MESSAGE_INFO_RAW_PRESSURE, MAVLINK_MESSAGE_INFO_SCALED_PRESSURE, MAVLINK_MESSAGE_INFO_ATTITUDE, MAVLINK_MESSAGE_INFO_ATTITUDE_QUATERNION, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED, MAVLINK_MESSAGE_INFO_GLOBAL_POSITION_INT, MAVLINK_MESSAGE_INFO_RC_CHANNELS_SCALED, MAVLINK_MESSAGE_INFO_RC_CHANNELS_RAW, MAVLINK_MESSAGE_INFO_SERVO_OUTPUT_RAW, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_PARTIAL_LIST, MAVLINK_MESSAGE_INFO_MISSION_WRITE_PARTIAL_LIST, MAVLINK_MESSAGE_INFO_MISSION_ITEM, MAVLINK_MESSAGE_INFO_MISSION_REQUEST, MAVLINK_MESSAGE_INFO_MISSION_SET_CURRENT, MAVLINK_MESSAGE_INFO_MISSION_CURRENT, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_LIST, MAVLINK_MESSAGE_INFO_MISSION_COUNT, MAVLINK_MESSAGE_INFO_MISSION_CLEAR_ALL, MAVLINK_MESSAGE_INFO_MISSION_ITEM_REACHED, MAVLINK_MESSAGE_INFO_MISSION_ACK, MAVLINK_MESSAGE_INFO_SET_GPS_GLOBAL_ORIGIN, MAVLINK_MESSAGE_INFO_GPS_GLOBAL_ORIGIN, MAVLINK_MESSAGE_INFO_SET_LOCAL_POSITION_SETPOINT, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_SETPOINT, MAVLINK_MESSAGE_INFO_GLOBAL_POSITION_SETPOINT_INT, MAVLINK_MESSAGE_INFO_SET_GLOBAL_POSITION_SETPOINT_INT, MAVLINK_MESSAGE_INFO_SAFETY_SET_ALLOWED_AREA, MAVLINK_MESSAGE_INFO_SAFETY_ALLOWED_AREA, MAVLINK_MESSAGE_INFO_SET_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_SET_ROLL_PITCH_YAW_SPEED_THRUST, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_SPEED_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_SET_QUAD_MOTORS_SETPOINT, MAVLINK_MESSAGE_INFO_SET_QUAD_SWARM_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_NAV_CONTROLLER_OUTPUT, MAVLINK_MESSAGE_INFO_SET_QUAD_SWARM_LED_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_STATE_CORRECTION, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_REQUEST_DATA_STREAM, MAVLINK_MESSAGE_INFO_DATA_STREAM, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_MANUAL_CONTROL, MAVLINK_MESSAGE_INFO_RC_CHANNELS_OVERRIDE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_VFR_HUD, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_COMMAND_LONG, MAVLINK_MESSAGE_INFO_COMMAND_ACK, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_RATES_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_MANUAL_SETPOINT, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED_SYSTEM_GLOBAL_OFFSET, MAVLINK_MESSAGE_INFO_HIL_STATE, MAVLINK_MESSAGE_INFO_HIL_CONTROLS, MAVLINK_MESSAGE_INFO_HIL_RC_INPUTS_RAW, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_OPTICAL_FLOW, MAVLINK_MESSAGE_INFO_GLOBAL_VISION_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_VISION_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_VISION_SPEED_ESTIMATE, MAVLINK_MESSAGE_INFO_VICON_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_HIGHRES_IMU, MAVLINK_MESSAGE_INFO_OMNIDIRECTIONAL_FLOW, MAVLINK_MESSAGE_INFO_HIL_SENSOR, MAVLINK_MESSAGE_INFO_SIM_STATE, MAVLINK_MESSAGE_INFO_RADIO_STATUS, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_START, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_DIR_LIST, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_RES, MAVLINK_MESSAGE_INFO_HIL_GPS, MAVLINK_MESSAGE_INFO_HIL_OPTICAL_FLOW, MAVLINK_MESSAGE_INFO_HIL_STATE_QUATERNION, MAVLINK_MESSAGE_INFO_SCALED_IMU2, MAVLINK_MESSAGE_INFO_LOG_REQUEST_LIST, MAVLINK_MESSAGE_INFO_LOG_ENTRY, MAVLINK_MESSAGE_INFO_LOG_REQUEST_DATA, MAVLINK_MESSAGE_INFO_LOG_DATA, MAVLINK_MESSAGE_INFO_LOG_ERASE, MAVLINK_MESSAGE_INFO_LOG_REQUEST_END, MAVLINK_MESSAGE_INFO_GPS_INJECT_DATA, MAVLINK_MESSAGE_INFO_GPS2_RAW, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_DATA_TRANSMISSION_HANDSHAKE, MAVLINK_MESSAGE_INFO_ENCAPSULATED_DATA, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_BATTERY_STATUS, MAVLINK_MESSAGE_INFO_SETPOINT_8DOF, MAVLINK_MESSAGE_INFO_SETPOINT_6DOF, MAVLINK_MESSAGE_INFO_FLEXIFUNCTION_SET, MAVLINK_MESSAGE_INFO_FLEXIFUNCTION_READ_REQ, MAVLINK_MESSAGE_INFO_FLEXIFUNCTION_BUFFER_FUNCTION, MAVLINK_MESSAGE_INFO_FLEXIFUNCTION_BUFFER_FUNCTION_ACK, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_FLEXIFUNCTION_DIRECTORY, MAVLINK_MESSAGE_INFO_FLEXIFUNCTION_DIRECTORY_ACK, MAVLINK_MESSAGE_INFO_FLEXIFUNCTION_COMMAND, MAVLINK_MESSAGE_INFO_FLEXIFUNCTION_COMMAND_ACK, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_SERIAL_UDB_EXTRA_F2_A, MAVLINK_MESSAGE_INFO_SERIAL_UDB_EXTRA_F2_B, MAVLINK_MESSAGE_INFO_SERIAL_UDB_EXTRA_F4, MAVLINK_MESSAGE_INFO_SERIAL_UDB_EXTRA_F5, MAVLINK_MESSAGE_INFO_SERIAL_UDB_EXTRA_F6, MAVLINK_MESSAGE_INFO_SERIAL_UDB_EXTRA_F7, MAVLINK_MESSAGE_INFO_SERIAL_UDB_EXTRA_F8, MAVLINK_MESSAGE_INFO_SERIAL_UDB_EXTRA_F13, MAVLINK_MESSAGE_INFO_SERIAL_UDB_EXTRA_F14, MAVLINK_MESSAGE_INFO_SERIAL_UDB_EXTRA_F15, MAVLINK_MESSAGE_INFO_SERIAL_UDB_EXTRA_F16, MAVLINK_MESSAGE_INFO_ALTITUDES, MAVLINK_MESSAGE_INFO_AIRSPEEDS, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_MEMORY_VECT, MAVLINK_MESSAGE_INFO_DEBUG_VECT, MAVLINK_MESSAGE_INFO_NAMED_VALUE_FLOAT, MAVLINK_MESSAGE_INFO_NAMED_VALUE_INT, MAVLINK_MESSAGE_INFO_STATUSTEXT, MAVLINK_MESSAGE_INFO_DEBUG, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}} +#define MAVLINK_MESSAGE_INFO {MAVLINK_MESSAGE_INFO_HEARTBEAT, MAVLINK_MESSAGE_INFO_SYS_STATUS, MAVLINK_MESSAGE_INFO_SYSTEM_TIME, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_PING, MAVLINK_MESSAGE_INFO_CHANGE_OPERATOR_CONTROL, MAVLINK_MESSAGE_INFO_CHANGE_OPERATOR_CONTROL_ACK, MAVLINK_MESSAGE_INFO_AUTH_KEY, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_SET_MODE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_PARAM_REQUEST_READ, MAVLINK_MESSAGE_INFO_PARAM_REQUEST_LIST, MAVLINK_MESSAGE_INFO_PARAM_VALUE, MAVLINK_MESSAGE_INFO_PARAM_SET, MAVLINK_MESSAGE_INFO_GPS_RAW_INT, MAVLINK_MESSAGE_INFO_GPS_STATUS, MAVLINK_MESSAGE_INFO_SCALED_IMU, MAVLINK_MESSAGE_INFO_RAW_IMU, MAVLINK_MESSAGE_INFO_RAW_PRESSURE, MAVLINK_MESSAGE_INFO_SCALED_PRESSURE, MAVLINK_MESSAGE_INFO_ATTITUDE, MAVLINK_MESSAGE_INFO_ATTITUDE_QUATERNION, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED, MAVLINK_MESSAGE_INFO_GLOBAL_POSITION_INT, MAVLINK_MESSAGE_INFO_RC_CHANNELS_SCALED, MAVLINK_MESSAGE_INFO_RC_CHANNELS_RAW, MAVLINK_MESSAGE_INFO_SERVO_OUTPUT_RAW, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_PARTIAL_LIST, MAVLINK_MESSAGE_INFO_MISSION_WRITE_PARTIAL_LIST, MAVLINK_MESSAGE_INFO_MISSION_ITEM, MAVLINK_MESSAGE_INFO_MISSION_REQUEST, MAVLINK_MESSAGE_INFO_MISSION_SET_CURRENT, MAVLINK_MESSAGE_INFO_MISSION_CURRENT, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_LIST, MAVLINK_MESSAGE_INFO_MISSION_COUNT, MAVLINK_MESSAGE_INFO_MISSION_CLEAR_ALL, MAVLINK_MESSAGE_INFO_MISSION_ITEM_REACHED, MAVLINK_MESSAGE_INFO_MISSION_ACK, MAVLINK_MESSAGE_INFO_SET_GPS_GLOBAL_ORIGIN, MAVLINK_MESSAGE_INFO_GPS_GLOBAL_ORIGIN, MAVLINK_MESSAGE_INFO_SET_LOCAL_POSITION_SETPOINT, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_SETPOINT, MAVLINK_MESSAGE_INFO_GLOBAL_POSITION_SETPOINT_INT, MAVLINK_MESSAGE_INFO_SET_GLOBAL_POSITION_SETPOINT_INT, MAVLINK_MESSAGE_INFO_SAFETY_SET_ALLOWED_AREA, MAVLINK_MESSAGE_INFO_SAFETY_ALLOWED_AREA, MAVLINK_MESSAGE_INFO_SET_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_SET_ROLL_PITCH_YAW_SPEED_THRUST, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_SPEED_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_SET_QUAD_MOTORS_SETPOINT, MAVLINK_MESSAGE_INFO_SET_QUAD_SWARM_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_NAV_CONTROLLER_OUTPUT, MAVLINK_MESSAGE_INFO_SET_QUAD_SWARM_LED_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_STATE_CORRECTION, MAVLINK_MESSAGE_INFO_RC_CHANNELS, MAVLINK_MESSAGE_INFO_REQUEST_DATA_STREAM, MAVLINK_MESSAGE_INFO_DATA_STREAM, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_MANUAL_CONTROL, MAVLINK_MESSAGE_INFO_RC_CHANNELS_OVERRIDE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_VFR_HUD, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_COMMAND_LONG, MAVLINK_MESSAGE_INFO_COMMAND_ACK, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_RATES_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_MANUAL_SETPOINT, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED_SYSTEM_GLOBAL_OFFSET, MAVLINK_MESSAGE_INFO_HIL_STATE, MAVLINK_MESSAGE_INFO_HIL_CONTROLS, MAVLINK_MESSAGE_INFO_HIL_RC_INPUTS_RAW, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_OPTICAL_FLOW, MAVLINK_MESSAGE_INFO_GLOBAL_VISION_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_VISION_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_VISION_SPEED_ESTIMATE, MAVLINK_MESSAGE_INFO_VICON_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_HIGHRES_IMU, MAVLINK_MESSAGE_INFO_OMNIDIRECTIONAL_FLOW, MAVLINK_MESSAGE_INFO_HIL_SENSOR, MAVLINK_MESSAGE_INFO_SIM_STATE, MAVLINK_MESSAGE_INFO_RADIO_STATUS, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_START, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_DIR_LIST, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_RES, MAVLINK_MESSAGE_INFO_HIL_GPS, MAVLINK_MESSAGE_INFO_HIL_OPTICAL_FLOW, MAVLINK_MESSAGE_INFO_HIL_STATE_QUATERNION, MAVLINK_MESSAGE_INFO_SCALED_IMU2, MAVLINK_MESSAGE_INFO_LOG_REQUEST_LIST, MAVLINK_MESSAGE_INFO_LOG_ENTRY, MAVLINK_MESSAGE_INFO_LOG_REQUEST_DATA, MAVLINK_MESSAGE_INFO_LOG_DATA, MAVLINK_MESSAGE_INFO_LOG_ERASE, MAVLINK_MESSAGE_INFO_LOG_REQUEST_END, MAVLINK_MESSAGE_INFO_GPS_INJECT_DATA, MAVLINK_MESSAGE_INFO_GPS2_RAW, MAVLINK_MESSAGE_INFO_POWER_STATUS, MAVLINK_MESSAGE_INFO_SERIAL_CONTROL, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_DATA_TRANSMISSION_HANDSHAKE, MAVLINK_MESSAGE_INFO_ENCAPSULATED_DATA, MAVLINK_MESSAGE_INFO_DISTANCE_SENSOR, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_BATTERY_STATUS, MAVLINK_MESSAGE_INFO_SETPOINT_8DOF, MAVLINK_MESSAGE_INFO_SETPOINT_6DOF, MAVLINK_MESSAGE_INFO_FLEXIFUNCTION_SET, MAVLINK_MESSAGE_INFO_FLEXIFUNCTION_READ_REQ, MAVLINK_MESSAGE_INFO_FLEXIFUNCTION_BUFFER_FUNCTION, MAVLINK_MESSAGE_INFO_FLEXIFUNCTION_BUFFER_FUNCTION_ACK, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_FLEXIFUNCTION_DIRECTORY, MAVLINK_MESSAGE_INFO_FLEXIFUNCTION_DIRECTORY_ACK, MAVLINK_MESSAGE_INFO_FLEXIFUNCTION_COMMAND, MAVLINK_MESSAGE_INFO_FLEXIFUNCTION_COMMAND_ACK, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_SERIAL_UDB_EXTRA_F2_A, MAVLINK_MESSAGE_INFO_SERIAL_UDB_EXTRA_F2_B, MAVLINK_MESSAGE_INFO_SERIAL_UDB_EXTRA_F4, MAVLINK_MESSAGE_INFO_SERIAL_UDB_EXTRA_F5, MAVLINK_MESSAGE_INFO_SERIAL_UDB_EXTRA_F6, MAVLINK_MESSAGE_INFO_SERIAL_UDB_EXTRA_F7, MAVLINK_MESSAGE_INFO_SERIAL_UDB_EXTRA_F8, MAVLINK_MESSAGE_INFO_SERIAL_UDB_EXTRA_F13, MAVLINK_MESSAGE_INFO_SERIAL_UDB_EXTRA_F14, MAVLINK_MESSAGE_INFO_SERIAL_UDB_EXTRA_F15, MAVLINK_MESSAGE_INFO_SERIAL_UDB_EXTRA_F16, MAVLINK_MESSAGE_INFO_ALTITUDES, MAVLINK_MESSAGE_INFO_AIRSPEEDS, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_MEMORY_VECT, MAVLINK_MESSAGE_INFO_DEBUG_VECT, MAVLINK_MESSAGE_INFO_NAMED_VALUE_FLOAT, MAVLINK_MESSAGE_INFO_NAMED_VALUE_INT, MAVLINK_MESSAGE_INFO_STATUSTEXT, MAVLINK_MESSAGE_INFO_DEBUG, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}} #endif #include "../protocol.h" @@ -61,6 +61,7 @@ enum MAV_CMD MAV_CMD_NAV_TAKEOFF=22, /* Takeoff from ground / hand |Minimum pitch (if airspeed sensor present), desired pitch without sensor| Empty| Empty| Yaw angle (if magnetometer present), ignored without magnetometer| Latitude| Longitude| Altitude| */ MAV_CMD_NAV_ROI=80, /* Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of intereset mode. (see MAV_ROI enum)| MISSION index/ target ID. (see MAV_ROI enum)| ROI index (allows a vehicle to manage multiple ROI's)| Empty| x the location of the fixed ROI (see MAV_FRAME)| y| z| */ MAV_CMD_NAV_PATHPLANNING=81, /* Control autonomous path planning on the MAV. |0: Disable local obstacle avoidance / local path planning (without resetting map), 1: Enable local path planning, 2: Enable and reset local path planning| 0: Disable full path planning (without resetting map), 1: Enable, 2: Enable and reset map/occupancy grid, 3: Enable and reset planned route, but not occupancy grid| Empty| Yaw angle at goal, in compass degrees, [0..360]| Latitude/X of goal| Longitude/Y of goal| Altitude/Z of goal| */ + MAV_CMD_NAV_SPLINE_WAYPOINT=82, /* Navigate to MISSION using a spline path. |Hold time in decimal seconds. (ignored by fixed wing, time to stay at MISSION for rotary wing)| Empty| Empty| Empty| Latitude/X of goal| Longitude/Y of goal| Altitude/Z of goal| */ MAV_CMD_NAV_LAST=95, /* NOP - This command is only used to mark the upper limit of the NAV/ACTION commands in the enumeration |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_CONDITION_DELAY=112, /* Delay mission state machine. |Delay in seconds (decimal)| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_CONDITION_CHANGE_ALT=113, /* Ascend/descend at rate. Delay mission state machine until desired altitude reached. |Descent / Ascend rate (m/s)| Empty| Empty| Empty| Empty| Empty| Finish Altitude| */ @@ -78,8 +79,16 @@ enum MAV_CMD MAV_CMD_DO_REPEAT_SERVO=184, /* Cycle a between its nominal setting and a desired PWM for a desired number of cycles with a desired period. |Servo number| PWM (microseconds, 1000 to 2000 typical)| Cycle count| Cycle time (seconds)| Empty| Empty| Empty| */ MAV_CMD_DO_CONTROL_VIDEO=200, /* Control onboard camera system. |Camera ID (-1 for all)| Transmission: 0: disabled, 1: enabled compressed, 2: enabled raw| Transmission mode: 0: video stream, >0: single images every n seconds (decimal)| Recording: 0: disabled, 1: enabled compressed, 2: enabled raw| Empty| Empty| Empty| */ MAV_CMD_DO_SET_ROI=201, /* Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of intereset mode. (see MAV_ROI enum)| MISSION index/ target ID. (see MAV_ROI enum)| ROI index (allows a vehicle to manage multiple ROI's)| Empty| x the location of the fixed ROI (see MAV_FRAME)| y| z| */ + MAV_CMD_DO_DIGICAM_CONFIGURE=202, /* Mission command to configure an on-board camera controller system. |Modes: P, TV, AV, M, Etc| Shutter speed: Divisor number for one second| Aperture: F stop number| ISO number e.g. 80, 100, 200, Etc| Exposure type enumerator| Command Identity| Main engine cut-off time before camera trigger in seconds/10 (0 means no cut-off)| */ + MAV_CMD_DO_DIGICAM_CONTROL=203, /* Mission command to control an on-board camera controller system. |Session control e.g. show/hide lens| Zoom's absolute position| Zooming step value to offset zoom from the current position| Focus Locking, Unlocking or Re-locking| Shooting Command| Command Identity| Empty| */ + MAV_CMD_DO_MOUNT_CONFIGURE=204, /* Mission command to configure a camera or antenna mount |Mount operation mode (see MAV_MOUNT_MODE enum)| stabilize roll? (1 = yes, 0 = no)| stabilize pitch? (1 = yes, 0 = no)| stabilize yaw? (1 = yes, 0 = no)| Empty| Empty| Empty| */ + MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch or lat in degrees, depending on mount mode.| roll or lon in degrees depending on mount mode| yaw or alt (in meters) depending on mount mode| reserved| reserved| reserved| MAV_MOUNT_MODE enum value| */ + MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set CAM_TRIGG_DIST for this flight |Camera trigger distance (meters)| Empty| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_DO_FENCE_ENABLE=207, /* Mission command to enable the geofence |enable? (0=disable, 1=enable)| Empty| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_DO_PARACHUTE=208, /* Mission command to trigger a parachute |action (0=disable, 1=enable, 2=release, for some systems see PARACHUTE_ACTION enum, not in general message set.)| Empty| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_DO_MOUNT_CONTROL_QUAT=220, /* Mission command to control a camera or antenna mount, using a quaternion as reference. |q1 - quaternion param #1| q2 - quaternion param #2| q3 - quaternion param #3| q4 - quaternion param #4| Empty| Empty| Empty| */ MAV_CMD_DO_LAST=240, /* NOP - This command is only used to mark the upper limit of the DO commands in the enumeration |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */ - MAV_CMD_PREFLIGHT_CALIBRATION=241, /* Trigger calibration. This command will be only accepted if in pre-flight mode. |Gyro calibration: 0: no, 1: yes| Magnetometer calibration: 0: no, 1: yes| Ground pressure: 0: no, 1: yes| Radio calibration: 0: no, 1: yes| Accelerometer calibration: 0: no, 1: yes| Empty| Empty| */ + MAV_CMD_PREFLIGHT_CALIBRATION=241, /* Trigger calibration. This command will be only accepted if in pre-flight mode. |Gyro calibration: 0: no, 1: yes| Magnetometer calibration: 0: no, 1: yes| Ground pressure: 0: no, 1: yes| Radio calibration: 0: no, 1: yes| Accelerometer calibration: 0: no, 1: yes| Compass/Motor interference calibration: 0: no, 1: yes| Empty| */ MAV_CMD_PREFLIGHT_SET_SENSOR_OFFSETS=242, /* Set sensor offsets. This command will be only accepted if in pre-flight mode. |Sensor to adjust the offsets for: 0: gyros, 1: accelerometer, 2: magnetometer, 3: barometer, 4: optical flow| X axis offset (or generic dimension 1), in the sensor's raw units| Y axis offset (or generic dimension 2), in the sensor's raw units| Z axis offset (or generic dimension 3), in the sensor's raw units| Generic dimension 4, in the sensor's raw units| Generic dimension 5, in the sensor's raw units| Generic dimension 6, in the sensor's raw units| */ MAV_CMD_PREFLIGHT_STORAGE=245, /* Request storage of different parameter values and logs. This command will be only accepted if in pre-flight mode. |Parameter storage: 0: READ FROM FLASH/EEPROM, 1: WRITE CURRENT TO FLASH/EEPROM| Mission storage: 0: READ FROM FLASH/EEPROM, 1: WRITE CURRENT TO FLASH/EEPROM| Reserved| Reserved| Empty| Empty| Empty| */ MAV_CMD_PREFLIGHT_REBOOT_SHUTDOWN=246, /* Request the reboot or shutdown of system components. |0: Do nothing for autopilot, 1: Reboot autopilot, 2: Shutdown autopilot.| 0: Do nothing for onboard computer, 1: Reboot onboard computer, 2: Shutdown onboard computer.| Reserved| Reserved| Empty| Empty| Empty| */ diff --git a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_airspeeds.h b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_airspeeds.h index bc47a547a..c834a3df0 100644 --- a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_airspeeds.h +++ b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_airspeeds.h @@ -212,6 +212,50 @@ static inline void mavlink_msg_airspeeds_send(mavlink_channel_t chan, uint32_t t #endif } +#if MAVLINK_MSG_ID_AIRSPEEDS_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_airspeeds_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint32_t time_boot_ms, int16_t airspeed_imu, int16_t airspeed_pitot, int16_t airspeed_hot_wire, int16_t airspeed_ultrasonic, int16_t aoa, int16_t aoy) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, time_boot_ms); + _mav_put_int16_t(buf, 4, airspeed_imu); + _mav_put_int16_t(buf, 6, airspeed_pitot); + _mav_put_int16_t(buf, 8, airspeed_hot_wire); + _mav_put_int16_t(buf, 10, airspeed_ultrasonic); + _mav_put_int16_t(buf, 12, aoa); + _mav_put_int16_t(buf, 14, aoy); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_AIRSPEEDS, buf, MAVLINK_MSG_ID_AIRSPEEDS_LEN, MAVLINK_MSG_ID_AIRSPEEDS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_AIRSPEEDS, buf, MAVLINK_MSG_ID_AIRSPEEDS_LEN); +#endif +#else + mavlink_airspeeds_t *packet = (mavlink_airspeeds_t *)msgbuf; + packet->time_boot_ms = time_boot_ms; + packet->airspeed_imu = airspeed_imu; + packet->airspeed_pitot = airspeed_pitot; + packet->airspeed_hot_wire = airspeed_hot_wire; + packet->airspeed_ultrasonic = airspeed_ultrasonic; + packet->aoa = aoa; + packet->aoy = aoy; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_AIRSPEEDS, (const char *)packet, MAVLINK_MSG_ID_AIRSPEEDS_LEN, MAVLINK_MSG_ID_AIRSPEEDS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_AIRSPEEDS, (const char *)packet, MAVLINK_MSG_ID_AIRSPEEDS_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE AIRSPEEDS UNPACKING diff --git a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_altitudes.h b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_altitudes.h index e64787cc7..b009068ff 100644 --- a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_altitudes.h +++ b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_altitudes.h @@ -212,6 +212,50 @@ static inline void mavlink_msg_altitudes_send(mavlink_channel_t chan, uint32_t t #endif } +#if MAVLINK_MSG_ID_ALTITUDES_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_altitudes_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint32_t time_boot_ms, int32_t alt_gps, int32_t alt_imu, int32_t alt_barometric, int32_t alt_optical_flow, int32_t alt_range_finder, int32_t alt_extra) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, time_boot_ms); + _mav_put_int32_t(buf, 4, alt_gps); + _mav_put_int32_t(buf, 8, alt_imu); + _mav_put_int32_t(buf, 12, alt_barometric); + _mav_put_int32_t(buf, 16, alt_optical_flow); + _mav_put_int32_t(buf, 20, alt_range_finder); + _mav_put_int32_t(buf, 24, alt_extra); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ALTITUDES, buf, MAVLINK_MSG_ID_ALTITUDES_LEN, MAVLINK_MSG_ID_ALTITUDES_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ALTITUDES, buf, MAVLINK_MSG_ID_ALTITUDES_LEN); +#endif +#else + mavlink_altitudes_t *packet = (mavlink_altitudes_t *)msgbuf; + packet->time_boot_ms = time_boot_ms; + packet->alt_gps = alt_gps; + packet->alt_imu = alt_imu; + packet->alt_barometric = alt_barometric; + packet->alt_optical_flow = alt_optical_flow; + packet->alt_range_finder = alt_range_finder; + packet->alt_extra = alt_extra; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ALTITUDES, (const char *)packet, MAVLINK_MSG_ID_ALTITUDES_LEN, MAVLINK_MSG_ID_ALTITUDES_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ALTITUDES, (const char *)packet, MAVLINK_MSG_ID_ALTITUDES_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE ALTITUDES UNPACKING diff --git a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_buffer_function.h b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_buffer_function.h index 581bd35dc..e7b803a14 100644 --- a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_buffer_function.h +++ b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_buffer_function.h @@ -206,6 +206,48 @@ static inline void mavlink_msg_flexifunction_buffer_function_send(mavlink_channe #endif } +#if MAVLINK_MSG_ID_FLEXIFUNCTION_BUFFER_FUNCTION_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_flexifunction_buffer_function_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, uint16_t func_index, uint16_t func_count, uint16_t data_address, uint16_t data_size, const int8_t *data) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint16_t(buf, 0, func_index); + _mav_put_uint16_t(buf, 2, func_count); + _mav_put_uint16_t(buf, 4, data_address); + _mav_put_uint16_t(buf, 6, data_size); + _mav_put_uint8_t(buf, 8, target_system); + _mav_put_uint8_t(buf, 9, target_component); + _mav_put_int8_t_array(buf, 10, data, 48); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_BUFFER_FUNCTION, buf, MAVLINK_MSG_ID_FLEXIFUNCTION_BUFFER_FUNCTION_LEN, MAVLINK_MSG_ID_FLEXIFUNCTION_BUFFER_FUNCTION_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_BUFFER_FUNCTION, buf, MAVLINK_MSG_ID_FLEXIFUNCTION_BUFFER_FUNCTION_LEN); +#endif +#else + mavlink_flexifunction_buffer_function_t *packet = (mavlink_flexifunction_buffer_function_t *)msgbuf; + packet->func_index = func_index; + packet->func_count = func_count; + packet->data_address = data_address; + packet->data_size = data_size; + packet->target_system = target_system; + packet->target_component = target_component; + mav_array_memcpy(packet->data, data, sizeof(int8_t)*48); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_BUFFER_FUNCTION, (const char *)packet, MAVLINK_MSG_ID_FLEXIFUNCTION_BUFFER_FUNCTION_LEN, MAVLINK_MSG_ID_FLEXIFUNCTION_BUFFER_FUNCTION_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_BUFFER_FUNCTION, (const char *)packet, MAVLINK_MSG_ID_FLEXIFUNCTION_BUFFER_FUNCTION_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE FLEXIFUNCTION_BUFFER_FUNCTION UNPACKING diff --git a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_buffer_function_ack.h b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_buffer_function_ack.h index 790afd52b..06631b40e 100644 --- a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_buffer_function_ack.h +++ b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_buffer_function_ack.h @@ -179,6 +179,44 @@ static inline void mavlink_msg_flexifunction_buffer_function_ack_send(mavlink_ch #endif } +#if MAVLINK_MSG_ID_FLEXIFUNCTION_BUFFER_FUNCTION_ACK_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_flexifunction_buffer_function_ack_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, uint16_t func_index, uint16_t result) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint16_t(buf, 0, func_index); + _mav_put_uint16_t(buf, 2, result); + _mav_put_uint8_t(buf, 4, target_system); + _mav_put_uint8_t(buf, 5, target_component); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_BUFFER_FUNCTION_ACK, buf, MAVLINK_MSG_ID_FLEXIFUNCTION_BUFFER_FUNCTION_ACK_LEN, MAVLINK_MSG_ID_FLEXIFUNCTION_BUFFER_FUNCTION_ACK_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_BUFFER_FUNCTION_ACK, buf, MAVLINK_MSG_ID_FLEXIFUNCTION_BUFFER_FUNCTION_ACK_LEN); +#endif +#else + mavlink_flexifunction_buffer_function_ack_t *packet = (mavlink_flexifunction_buffer_function_ack_t *)msgbuf; + packet->func_index = func_index; + packet->result = result; + packet->target_system = target_system; + packet->target_component = target_component; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_BUFFER_FUNCTION_ACK, (const char *)packet, MAVLINK_MSG_ID_FLEXIFUNCTION_BUFFER_FUNCTION_ACK_LEN, MAVLINK_MSG_ID_FLEXIFUNCTION_BUFFER_FUNCTION_ACK_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_BUFFER_FUNCTION_ACK, (const char *)packet, MAVLINK_MSG_ID_FLEXIFUNCTION_BUFFER_FUNCTION_ACK_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE FLEXIFUNCTION_BUFFER_FUNCTION_ACK UNPACKING diff --git a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_command.h b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_command.h index ce722c8a4..ac8366eef 100644 --- a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_command.h +++ b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_command.h @@ -168,6 +168,42 @@ static inline void mavlink_msg_flexifunction_command_send(mavlink_channel_t chan #endif } +#if MAVLINK_MSG_ID_FLEXIFUNCTION_COMMAND_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_flexifunction_command_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, uint8_t command_type) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint8_t(buf, 0, target_system); + _mav_put_uint8_t(buf, 1, target_component); + _mav_put_uint8_t(buf, 2, command_type); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_COMMAND, buf, MAVLINK_MSG_ID_FLEXIFUNCTION_COMMAND_LEN, MAVLINK_MSG_ID_FLEXIFUNCTION_COMMAND_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_COMMAND, buf, MAVLINK_MSG_ID_FLEXIFUNCTION_COMMAND_LEN); +#endif +#else + mavlink_flexifunction_command_t *packet = (mavlink_flexifunction_command_t *)msgbuf; + packet->target_system = target_system; + packet->target_component = target_component; + packet->command_type = command_type; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_COMMAND, (const char *)packet, MAVLINK_MSG_ID_FLEXIFUNCTION_COMMAND_LEN, MAVLINK_MSG_ID_FLEXIFUNCTION_COMMAND_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_COMMAND, (const char *)packet, MAVLINK_MSG_ID_FLEXIFUNCTION_COMMAND_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE FLEXIFUNCTION_COMMAND UNPACKING diff --git a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_command_ack.h b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_command_ack.h index 070dc4bf8..c88e2dc39 100644 --- a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_command_ack.h +++ b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_command_ack.h @@ -157,6 +157,40 @@ static inline void mavlink_msg_flexifunction_command_ack_send(mavlink_channel_t #endif } +#if MAVLINK_MSG_ID_FLEXIFUNCTION_COMMAND_ACK_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_flexifunction_command_ack_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint16_t command_type, uint16_t result) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint16_t(buf, 0, command_type); + _mav_put_uint16_t(buf, 2, result); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_COMMAND_ACK, buf, MAVLINK_MSG_ID_FLEXIFUNCTION_COMMAND_ACK_LEN, MAVLINK_MSG_ID_FLEXIFUNCTION_COMMAND_ACK_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_COMMAND_ACK, buf, MAVLINK_MSG_ID_FLEXIFUNCTION_COMMAND_ACK_LEN); +#endif +#else + mavlink_flexifunction_command_ack_t *packet = (mavlink_flexifunction_command_ack_t *)msgbuf; + packet->command_type = command_type; + packet->result = result; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_COMMAND_ACK, (const char *)packet, MAVLINK_MSG_ID_FLEXIFUNCTION_COMMAND_ACK_LEN, MAVLINK_MSG_ID_FLEXIFUNCTION_COMMAND_ACK_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_COMMAND_ACK, (const char *)packet, MAVLINK_MSG_ID_FLEXIFUNCTION_COMMAND_ACK_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE FLEXIFUNCTION_COMMAND_ACK UNPACKING diff --git a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_directory.h b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_directory.h index ef262a6b1..619f810c5 100644 --- a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_directory.h +++ b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_directory.h @@ -195,6 +195,46 @@ static inline void mavlink_msg_flexifunction_directory_send(mavlink_channel_t ch #endif } +#if MAVLINK_MSG_ID_FLEXIFUNCTION_DIRECTORY_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_flexifunction_directory_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, uint8_t directory_type, uint8_t start_index, uint8_t count, const int8_t *directory_data) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint8_t(buf, 0, target_system); + _mav_put_uint8_t(buf, 1, target_component); + _mav_put_uint8_t(buf, 2, directory_type); + _mav_put_uint8_t(buf, 3, start_index); + _mav_put_uint8_t(buf, 4, count); + _mav_put_int8_t_array(buf, 5, directory_data, 48); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_DIRECTORY, buf, MAVLINK_MSG_ID_FLEXIFUNCTION_DIRECTORY_LEN, MAVLINK_MSG_ID_FLEXIFUNCTION_DIRECTORY_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_DIRECTORY, buf, MAVLINK_MSG_ID_FLEXIFUNCTION_DIRECTORY_LEN); +#endif +#else + mavlink_flexifunction_directory_t *packet = (mavlink_flexifunction_directory_t *)msgbuf; + packet->target_system = target_system; + packet->target_component = target_component; + packet->directory_type = directory_type; + packet->start_index = start_index; + packet->count = count; + mav_array_memcpy(packet->directory_data, directory_data, sizeof(int8_t)*48); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_DIRECTORY, (const char *)packet, MAVLINK_MSG_ID_FLEXIFUNCTION_DIRECTORY_LEN, MAVLINK_MSG_ID_FLEXIFUNCTION_DIRECTORY_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_DIRECTORY, (const char *)packet, MAVLINK_MSG_ID_FLEXIFUNCTION_DIRECTORY_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE FLEXIFUNCTION_DIRECTORY UNPACKING diff --git a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_directory_ack.h b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_directory_ack.h index d3a386ce5..0287183d8 100644 --- a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_directory_ack.h +++ b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_directory_ack.h @@ -201,6 +201,48 @@ static inline void mavlink_msg_flexifunction_directory_ack_send(mavlink_channel_ #endif } +#if MAVLINK_MSG_ID_FLEXIFUNCTION_DIRECTORY_ACK_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_flexifunction_directory_ack_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, uint8_t directory_type, uint8_t start_index, uint8_t count, uint16_t result) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint16_t(buf, 0, result); + _mav_put_uint8_t(buf, 2, target_system); + _mav_put_uint8_t(buf, 3, target_component); + _mav_put_uint8_t(buf, 4, directory_type); + _mav_put_uint8_t(buf, 5, start_index); + _mav_put_uint8_t(buf, 6, count); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_DIRECTORY_ACK, buf, MAVLINK_MSG_ID_FLEXIFUNCTION_DIRECTORY_ACK_LEN, MAVLINK_MSG_ID_FLEXIFUNCTION_DIRECTORY_ACK_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_DIRECTORY_ACK, buf, MAVLINK_MSG_ID_FLEXIFUNCTION_DIRECTORY_ACK_LEN); +#endif +#else + mavlink_flexifunction_directory_ack_t *packet = (mavlink_flexifunction_directory_ack_t *)msgbuf; + packet->result = result; + packet->target_system = target_system; + packet->target_component = target_component; + packet->directory_type = directory_type; + packet->start_index = start_index; + packet->count = count; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_DIRECTORY_ACK, (const char *)packet, MAVLINK_MSG_ID_FLEXIFUNCTION_DIRECTORY_ACK_LEN, MAVLINK_MSG_ID_FLEXIFUNCTION_DIRECTORY_ACK_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_DIRECTORY_ACK, (const char *)packet, MAVLINK_MSG_ID_FLEXIFUNCTION_DIRECTORY_ACK_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE FLEXIFUNCTION_DIRECTORY_ACK UNPACKING diff --git a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_read_req.h b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_read_req.h index e50f77b08..570782e79 100644 --- a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_read_req.h +++ b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_read_req.h @@ -179,6 +179,44 @@ static inline void mavlink_msg_flexifunction_read_req_send(mavlink_channel_t cha #endif } +#if MAVLINK_MSG_ID_FLEXIFUNCTION_READ_REQ_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_flexifunction_read_req_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, int16_t read_req_type, int16_t data_index) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_int16_t(buf, 0, read_req_type); + _mav_put_int16_t(buf, 2, data_index); + _mav_put_uint8_t(buf, 4, target_system); + _mav_put_uint8_t(buf, 5, target_component); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_READ_REQ, buf, MAVLINK_MSG_ID_FLEXIFUNCTION_READ_REQ_LEN, MAVLINK_MSG_ID_FLEXIFUNCTION_READ_REQ_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_READ_REQ, buf, MAVLINK_MSG_ID_FLEXIFUNCTION_READ_REQ_LEN); +#endif +#else + mavlink_flexifunction_read_req_t *packet = (mavlink_flexifunction_read_req_t *)msgbuf; + packet->read_req_type = read_req_type; + packet->data_index = data_index; + packet->target_system = target_system; + packet->target_component = target_component; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_READ_REQ, (const char *)packet, MAVLINK_MSG_ID_FLEXIFUNCTION_READ_REQ_LEN, MAVLINK_MSG_ID_FLEXIFUNCTION_READ_REQ_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_READ_REQ, (const char *)packet, MAVLINK_MSG_ID_FLEXIFUNCTION_READ_REQ_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE FLEXIFUNCTION_READ_REQ UNPACKING diff --git a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_set.h b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_set.h index 41afb3811..c10000640 100644 --- a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_set.h +++ b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_flexifunction_set.h @@ -157,6 +157,40 @@ static inline void mavlink_msg_flexifunction_set_send(mavlink_channel_t chan, ui #endif } +#if MAVLINK_MSG_ID_FLEXIFUNCTION_SET_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_flexifunction_set_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint8_t(buf, 0, target_system); + _mav_put_uint8_t(buf, 1, target_component); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_SET, buf, MAVLINK_MSG_ID_FLEXIFUNCTION_SET_LEN, MAVLINK_MSG_ID_FLEXIFUNCTION_SET_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_SET, buf, MAVLINK_MSG_ID_FLEXIFUNCTION_SET_LEN); +#endif +#else + mavlink_flexifunction_set_t *packet = (mavlink_flexifunction_set_t *)msgbuf; + packet->target_system = target_system; + packet->target_component = target_component; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_SET, (const char *)packet, MAVLINK_MSG_ID_FLEXIFUNCTION_SET_LEN, MAVLINK_MSG_ID_FLEXIFUNCTION_SET_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FLEXIFUNCTION_SET, (const char *)packet, MAVLINK_MSG_ID_FLEXIFUNCTION_SET_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE FLEXIFUNCTION_SET UNPACKING diff --git a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f13.h b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f13.h index d21ab4816..bbb753a06 100644 --- a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f13.h +++ b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f13.h @@ -179,6 +179,44 @@ static inline void mavlink_msg_serial_udb_extra_f13_send(mavlink_channel_t chan, #endif } +#if MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F13_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_serial_udb_extra_f13_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, int16_t sue_week_no, int32_t sue_lat_origin, int32_t sue_lon_origin, int32_t sue_alt_origin) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_int32_t(buf, 0, sue_lat_origin); + _mav_put_int32_t(buf, 4, sue_lon_origin); + _mav_put_int32_t(buf, 8, sue_alt_origin); + _mav_put_int16_t(buf, 12, sue_week_no); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F13, buf, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F13_LEN, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F13_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F13, buf, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F13_LEN); +#endif +#else + mavlink_serial_udb_extra_f13_t *packet = (mavlink_serial_udb_extra_f13_t *)msgbuf; + packet->sue_lat_origin = sue_lat_origin; + packet->sue_lon_origin = sue_lon_origin; + packet->sue_alt_origin = sue_alt_origin; + packet->sue_week_no = sue_week_no; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F13, (const char *)packet, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F13_LEN, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F13_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F13, (const char *)packet, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F13_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SERIAL_UDB_EXTRA_F13 UNPACKING diff --git a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f14.h b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f14.h index 6ac12f28a..112564d00 100644 --- a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f14.h +++ b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f14.h @@ -256,6 +256,58 @@ static inline void mavlink_msg_serial_udb_extra_f14_send(mavlink_channel_t chan, #endif } +#if MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F14_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_serial_udb_extra_f14_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t sue_WIND_ESTIMATION, uint8_t sue_GPS_TYPE, uint8_t sue_DR, uint8_t sue_BOARD_TYPE, uint8_t sue_AIRFRAME, int16_t sue_RCON, int16_t sue_TRAP_FLAGS, uint32_t sue_TRAP_SOURCE, int16_t sue_osc_fail_count, uint8_t sue_CLOCK_CONFIG, uint8_t sue_FLIGHT_PLAN_TYPE) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, sue_TRAP_SOURCE); + _mav_put_int16_t(buf, 4, sue_RCON); + _mav_put_int16_t(buf, 6, sue_TRAP_FLAGS); + _mav_put_int16_t(buf, 8, sue_osc_fail_count); + _mav_put_uint8_t(buf, 10, sue_WIND_ESTIMATION); + _mav_put_uint8_t(buf, 11, sue_GPS_TYPE); + _mav_put_uint8_t(buf, 12, sue_DR); + _mav_put_uint8_t(buf, 13, sue_BOARD_TYPE); + _mav_put_uint8_t(buf, 14, sue_AIRFRAME); + _mav_put_uint8_t(buf, 15, sue_CLOCK_CONFIG); + _mav_put_uint8_t(buf, 16, sue_FLIGHT_PLAN_TYPE); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F14, buf, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F14_LEN, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F14_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F14, buf, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F14_LEN); +#endif +#else + mavlink_serial_udb_extra_f14_t *packet = (mavlink_serial_udb_extra_f14_t *)msgbuf; + packet->sue_TRAP_SOURCE = sue_TRAP_SOURCE; + packet->sue_RCON = sue_RCON; + packet->sue_TRAP_FLAGS = sue_TRAP_FLAGS; + packet->sue_osc_fail_count = sue_osc_fail_count; + packet->sue_WIND_ESTIMATION = sue_WIND_ESTIMATION; + packet->sue_GPS_TYPE = sue_GPS_TYPE; + packet->sue_DR = sue_DR; + packet->sue_BOARD_TYPE = sue_BOARD_TYPE; + packet->sue_AIRFRAME = sue_AIRFRAME; + packet->sue_CLOCK_CONFIG = sue_CLOCK_CONFIG; + packet->sue_FLIGHT_PLAN_TYPE = sue_FLIGHT_PLAN_TYPE; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F14, (const char *)packet, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F14_LEN, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F14_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F14, (const char *)packet, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F14_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SERIAL_UDB_EXTRA_F14 UNPACKING diff --git a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f15.h b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f15.h index 10c3f4ca4..77666407d 100644 --- a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f15.h +++ b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f15.h @@ -158,6 +158,40 @@ static inline void mavlink_msg_serial_udb_extra_f15_send(mavlink_channel_t chan, #endif } +#if MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F15_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_serial_udb_extra_f15_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, const uint8_t *sue_ID_VEHICLE_MODEL_NAME, const uint8_t *sue_ID_VEHICLE_REGISTRATION) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + + _mav_put_uint8_t_array(buf, 0, sue_ID_VEHICLE_MODEL_NAME, 40); + _mav_put_uint8_t_array(buf, 40, sue_ID_VEHICLE_REGISTRATION, 20); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F15, buf, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F15_LEN, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F15_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F15, buf, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F15_LEN); +#endif +#else + mavlink_serial_udb_extra_f15_t *packet = (mavlink_serial_udb_extra_f15_t *)msgbuf; + + mav_array_memcpy(packet->sue_ID_VEHICLE_MODEL_NAME, sue_ID_VEHICLE_MODEL_NAME, sizeof(uint8_t)*40); + mav_array_memcpy(packet->sue_ID_VEHICLE_REGISTRATION, sue_ID_VEHICLE_REGISTRATION, sizeof(uint8_t)*20); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F15, (const char *)packet, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F15_LEN, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F15_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F15, (const char *)packet, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F15_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SERIAL_UDB_EXTRA_F15 UNPACKING diff --git a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f16.h b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f16.h index 659e6b7c5..ca9f0556f 100644 --- a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f16.h +++ b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f16.h @@ -158,6 +158,40 @@ static inline void mavlink_msg_serial_udb_extra_f16_send(mavlink_channel_t chan, #endif } +#if MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F16_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_serial_udb_extra_f16_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, const uint8_t *sue_ID_LEAD_PILOT, const uint8_t *sue_ID_DIY_DRONES_URL) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + + _mav_put_uint8_t_array(buf, 0, sue_ID_LEAD_PILOT, 40); + _mav_put_uint8_t_array(buf, 40, sue_ID_DIY_DRONES_URL, 70); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F16, buf, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F16_LEN, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F16_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F16, buf, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F16_LEN); +#endif +#else + mavlink_serial_udb_extra_f16_t *packet = (mavlink_serial_udb_extra_f16_t *)msgbuf; + + mav_array_memcpy(packet->sue_ID_LEAD_PILOT, sue_ID_LEAD_PILOT, sizeof(uint8_t)*40); + mav_array_memcpy(packet->sue_ID_DIY_DRONES_URL, sue_ID_DIY_DRONES_URL, sizeof(uint8_t)*70); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F16, (const char *)packet, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F16_LEN, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F16_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F16, (const char *)packet, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F16_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SERIAL_UDB_EXTRA_F16 UNPACKING diff --git a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f2_a.h b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f2_a.h index 15ba68a34..41b9f09c0 100644 --- a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f2_a.h +++ b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f2_a.h @@ -443,6 +443,92 @@ static inline void mavlink_msg_serial_udb_extra_f2_a_send(mavlink_channel_t chan #endif } +#if MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F2_A_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_serial_udb_extra_f2_a_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint32_t sue_time, uint8_t sue_status, int32_t sue_latitude, int32_t sue_longitude, int32_t sue_altitude, uint16_t sue_waypoint_index, int16_t sue_rmat0, int16_t sue_rmat1, int16_t sue_rmat2, int16_t sue_rmat3, int16_t sue_rmat4, int16_t sue_rmat5, int16_t sue_rmat6, int16_t sue_rmat7, int16_t sue_rmat8, uint16_t sue_cog, int16_t sue_sog, uint16_t sue_cpu_load, int16_t sue_voltage_milis, uint16_t sue_air_speed_3DIMU, int16_t sue_estimated_wind_0, int16_t sue_estimated_wind_1, int16_t sue_estimated_wind_2, int16_t sue_magFieldEarth0, int16_t sue_magFieldEarth1, int16_t sue_magFieldEarth2, int16_t sue_svs, int16_t sue_hdop) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, sue_time); + _mav_put_int32_t(buf, 4, sue_latitude); + _mav_put_int32_t(buf, 8, sue_longitude); + _mav_put_int32_t(buf, 12, sue_altitude); + _mav_put_uint16_t(buf, 16, sue_waypoint_index); + _mav_put_int16_t(buf, 18, sue_rmat0); + _mav_put_int16_t(buf, 20, sue_rmat1); + _mav_put_int16_t(buf, 22, sue_rmat2); + _mav_put_int16_t(buf, 24, sue_rmat3); + _mav_put_int16_t(buf, 26, sue_rmat4); + _mav_put_int16_t(buf, 28, sue_rmat5); + _mav_put_int16_t(buf, 30, sue_rmat6); + _mav_put_int16_t(buf, 32, sue_rmat7); + _mav_put_int16_t(buf, 34, sue_rmat8); + _mav_put_uint16_t(buf, 36, sue_cog); + _mav_put_int16_t(buf, 38, sue_sog); + _mav_put_uint16_t(buf, 40, sue_cpu_load); + _mav_put_int16_t(buf, 42, sue_voltage_milis); + _mav_put_uint16_t(buf, 44, sue_air_speed_3DIMU); + _mav_put_int16_t(buf, 46, sue_estimated_wind_0); + _mav_put_int16_t(buf, 48, sue_estimated_wind_1); + _mav_put_int16_t(buf, 50, sue_estimated_wind_2); + _mav_put_int16_t(buf, 52, sue_magFieldEarth0); + _mav_put_int16_t(buf, 54, sue_magFieldEarth1); + _mav_put_int16_t(buf, 56, sue_magFieldEarth2); + _mav_put_int16_t(buf, 58, sue_svs); + _mav_put_int16_t(buf, 60, sue_hdop); + _mav_put_uint8_t(buf, 62, sue_status); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F2_A, buf, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F2_A_LEN, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F2_A_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F2_A, buf, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F2_A_LEN); +#endif +#else + mavlink_serial_udb_extra_f2_a_t *packet = (mavlink_serial_udb_extra_f2_a_t *)msgbuf; + packet->sue_time = sue_time; + packet->sue_latitude = sue_latitude; + packet->sue_longitude = sue_longitude; + packet->sue_altitude = sue_altitude; + packet->sue_waypoint_index = sue_waypoint_index; + packet->sue_rmat0 = sue_rmat0; + packet->sue_rmat1 = sue_rmat1; + packet->sue_rmat2 = sue_rmat2; + packet->sue_rmat3 = sue_rmat3; + packet->sue_rmat4 = sue_rmat4; + packet->sue_rmat5 = sue_rmat5; + packet->sue_rmat6 = sue_rmat6; + packet->sue_rmat7 = sue_rmat7; + packet->sue_rmat8 = sue_rmat8; + packet->sue_cog = sue_cog; + packet->sue_sog = sue_sog; + packet->sue_cpu_load = sue_cpu_load; + packet->sue_voltage_milis = sue_voltage_milis; + packet->sue_air_speed_3DIMU = sue_air_speed_3DIMU; + packet->sue_estimated_wind_0 = sue_estimated_wind_0; + packet->sue_estimated_wind_1 = sue_estimated_wind_1; + packet->sue_estimated_wind_2 = sue_estimated_wind_2; + packet->sue_magFieldEarth0 = sue_magFieldEarth0; + packet->sue_magFieldEarth1 = sue_magFieldEarth1; + packet->sue_magFieldEarth2 = sue_magFieldEarth2; + packet->sue_svs = sue_svs; + packet->sue_hdop = sue_hdop; + packet->sue_status = sue_status; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F2_A, (const char *)packet, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F2_A_LEN, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F2_A_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F2_A, (const char *)packet, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F2_A_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SERIAL_UDB_EXTRA_F2_A UNPACKING diff --git a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f2_b.h b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f2_b.h index 7cb8c87da..3e1757f74 100644 --- a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f2_b.h +++ b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f2_b.h @@ -498,6 +498,102 @@ static inline void mavlink_msg_serial_udb_extra_f2_b_send(mavlink_channel_t chan #endif } +#if MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F2_B_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_serial_udb_extra_f2_b_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint32_t sue_time, int16_t sue_pwm_input_1, int16_t sue_pwm_input_2, int16_t sue_pwm_input_3, int16_t sue_pwm_input_4, int16_t sue_pwm_input_5, int16_t sue_pwm_input_6, int16_t sue_pwm_input_7, int16_t sue_pwm_input_8, int16_t sue_pwm_input_9, int16_t sue_pwm_input_10, int16_t sue_pwm_output_1, int16_t sue_pwm_output_2, int16_t sue_pwm_output_3, int16_t sue_pwm_output_4, int16_t sue_pwm_output_5, int16_t sue_pwm_output_6, int16_t sue_pwm_output_7, int16_t sue_pwm_output_8, int16_t sue_pwm_output_9, int16_t sue_pwm_output_10, int16_t sue_imu_location_x, int16_t sue_imu_location_y, int16_t sue_imu_location_z, uint32_t sue_flags, int16_t sue_osc_fails, int16_t sue_imu_velocity_x, int16_t sue_imu_velocity_y, int16_t sue_imu_velocity_z, int16_t sue_waypoint_goal_x, int16_t sue_waypoint_goal_y, int16_t sue_waypoint_goal_z, int16_t sue_memory_stack_free) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint32_t(buf, 0, sue_time); + _mav_put_uint32_t(buf, 4, sue_flags); + _mav_put_int16_t(buf, 8, sue_pwm_input_1); + _mav_put_int16_t(buf, 10, sue_pwm_input_2); + _mav_put_int16_t(buf, 12, sue_pwm_input_3); + _mav_put_int16_t(buf, 14, sue_pwm_input_4); + _mav_put_int16_t(buf, 16, sue_pwm_input_5); + _mav_put_int16_t(buf, 18, sue_pwm_input_6); + _mav_put_int16_t(buf, 20, sue_pwm_input_7); + _mav_put_int16_t(buf, 22, sue_pwm_input_8); + _mav_put_int16_t(buf, 24, sue_pwm_input_9); + _mav_put_int16_t(buf, 26, sue_pwm_input_10); + _mav_put_int16_t(buf, 28, sue_pwm_output_1); + _mav_put_int16_t(buf, 30, sue_pwm_output_2); + _mav_put_int16_t(buf, 32, sue_pwm_output_3); + _mav_put_int16_t(buf, 34, sue_pwm_output_4); + _mav_put_int16_t(buf, 36, sue_pwm_output_5); + _mav_put_int16_t(buf, 38, sue_pwm_output_6); + _mav_put_int16_t(buf, 40, sue_pwm_output_7); + _mav_put_int16_t(buf, 42, sue_pwm_output_8); + _mav_put_int16_t(buf, 44, sue_pwm_output_9); + _mav_put_int16_t(buf, 46, sue_pwm_output_10); + _mav_put_int16_t(buf, 48, sue_imu_location_x); + _mav_put_int16_t(buf, 50, sue_imu_location_y); + _mav_put_int16_t(buf, 52, sue_imu_location_z); + _mav_put_int16_t(buf, 54, sue_osc_fails); + _mav_put_int16_t(buf, 56, sue_imu_velocity_x); + _mav_put_int16_t(buf, 58, sue_imu_velocity_y); + _mav_put_int16_t(buf, 60, sue_imu_velocity_z); + _mav_put_int16_t(buf, 62, sue_waypoint_goal_x); + _mav_put_int16_t(buf, 64, sue_waypoint_goal_y); + _mav_put_int16_t(buf, 66, sue_waypoint_goal_z); + _mav_put_int16_t(buf, 68, sue_memory_stack_free); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F2_B, buf, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F2_B_LEN, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F2_B_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F2_B, buf, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F2_B_LEN); +#endif +#else + mavlink_serial_udb_extra_f2_b_t *packet = (mavlink_serial_udb_extra_f2_b_t *)msgbuf; + packet->sue_time = sue_time; + packet->sue_flags = sue_flags; + packet->sue_pwm_input_1 = sue_pwm_input_1; + packet->sue_pwm_input_2 = sue_pwm_input_2; + packet->sue_pwm_input_3 = sue_pwm_input_3; + packet->sue_pwm_input_4 = sue_pwm_input_4; + packet->sue_pwm_input_5 = sue_pwm_input_5; + packet->sue_pwm_input_6 = sue_pwm_input_6; + packet->sue_pwm_input_7 = sue_pwm_input_7; + packet->sue_pwm_input_8 = sue_pwm_input_8; + packet->sue_pwm_input_9 = sue_pwm_input_9; + packet->sue_pwm_input_10 = sue_pwm_input_10; + packet->sue_pwm_output_1 = sue_pwm_output_1; + packet->sue_pwm_output_2 = sue_pwm_output_2; + packet->sue_pwm_output_3 = sue_pwm_output_3; + packet->sue_pwm_output_4 = sue_pwm_output_4; + packet->sue_pwm_output_5 = sue_pwm_output_5; + packet->sue_pwm_output_6 = sue_pwm_output_6; + packet->sue_pwm_output_7 = sue_pwm_output_7; + packet->sue_pwm_output_8 = sue_pwm_output_8; + packet->sue_pwm_output_9 = sue_pwm_output_9; + packet->sue_pwm_output_10 = sue_pwm_output_10; + packet->sue_imu_location_x = sue_imu_location_x; + packet->sue_imu_location_y = sue_imu_location_y; + packet->sue_imu_location_z = sue_imu_location_z; + packet->sue_osc_fails = sue_osc_fails; + packet->sue_imu_velocity_x = sue_imu_velocity_x; + packet->sue_imu_velocity_y = sue_imu_velocity_y; + packet->sue_imu_velocity_z = sue_imu_velocity_z; + packet->sue_waypoint_goal_x = sue_waypoint_goal_x; + packet->sue_waypoint_goal_y = sue_waypoint_goal_y; + packet->sue_waypoint_goal_z = sue_waypoint_goal_z; + packet->sue_memory_stack_free = sue_memory_stack_free; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F2_B, (const char *)packet, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F2_B_LEN, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F2_B_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F2_B, (const char *)packet, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F2_B_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SERIAL_UDB_EXTRA_F2_B UNPACKING diff --git a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f4.h b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f4.h index 77c616cc2..edd1e924c 100644 --- a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f4.h +++ b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f4.h @@ -245,6 +245,56 @@ static inline void mavlink_msg_serial_udb_extra_f4_send(mavlink_channel_t chan, #endif } +#if MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F4_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_serial_udb_extra_f4_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t sue_ROLL_STABILIZATION_AILERONS, uint8_t sue_ROLL_STABILIZATION_RUDDER, uint8_t sue_PITCH_STABILIZATION, uint8_t sue_YAW_STABILIZATION_RUDDER, uint8_t sue_YAW_STABILIZATION_AILERON, uint8_t sue_AILERON_NAVIGATION, uint8_t sue_RUDDER_NAVIGATION, uint8_t sue_ALTITUDEHOLD_STABILIZED, uint8_t sue_ALTITUDEHOLD_WAYPOINT, uint8_t sue_RACING_MODE) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint8_t(buf, 0, sue_ROLL_STABILIZATION_AILERONS); + _mav_put_uint8_t(buf, 1, sue_ROLL_STABILIZATION_RUDDER); + _mav_put_uint8_t(buf, 2, sue_PITCH_STABILIZATION); + _mav_put_uint8_t(buf, 3, sue_YAW_STABILIZATION_RUDDER); + _mav_put_uint8_t(buf, 4, sue_YAW_STABILIZATION_AILERON); + _mav_put_uint8_t(buf, 5, sue_AILERON_NAVIGATION); + _mav_put_uint8_t(buf, 6, sue_RUDDER_NAVIGATION); + _mav_put_uint8_t(buf, 7, sue_ALTITUDEHOLD_STABILIZED); + _mav_put_uint8_t(buf, 8, sue_ALTITUDEHOLD_WAYPOINT); + _mav_put_uint8_t(buf, 9, sue_RACING_MODE); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F4, buf, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F4_LEN, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F4_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F4, buf, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F4_LEN); +#endif +#else + mavlink_serial_udb_extra_f4_t *packet = (mavlink_serial_udb_extra_f4_t *)msgbuf; + packet->sue_ROLL_STABILIZATION_AILERONS = sue_ROLL_STABILIZATION_AILERONS; + packet->sue_ROLL_STABILIZATION_RUDDER = sue_ROLL_STABILIZATION_RUDDER; + packet->sue_PITCH_STABILIZATION = sue_PITCH_STABILIZATION; + packet->sue_YAW_STABILIZATION_RUDDER = sue_YAW_STABILIZATION_RUDDER; + packet->sue_YAW_STABILIZATION_AILERON = sue_YAW_STABILIZATION_AILERON; + packet->sue_AILERON_NAVIGATION = sue_AILERON_NAVIGATION; + packet->sue_RUDDER_NAVIGATION = sue_RUDDER_NAVIGATION; + packet->sue_ALTITUDEHOLD_STABILIZED = sue_ALTITUDEHOLD_STABILIZED; + packet->sue_ALTITUDEHOLD_WAYPOINT = sue_ALTITUDEHOLD_WAYPOINT; + packet->sue_RACING_MODE = sue_RACING_MODE; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F4, (const char *)packet, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F4_LEN, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F4_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F4, (const char *)packet, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F4_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SERIAL_UDB_EXTRA_F4 UNPACKING diff --git a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f5.h b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f5.h index e115a9b44..a821f65bb 100644 --- a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f5.h +++ b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f5.h @@ -201,6 +201,48 @@ static inline void mavlink_msg_serial_udb_extra_f5_send(mavlink_channel_t chan, #endif } +#if MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F5_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_serial_udb_extra_f5_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, float sue_YAWKP_AILERON, float sue_YAWKD_AILERON, float sue_ROLLKP, float sue_ROLLKD, float sue_YAW_STABILIZATION_AILERON, float sue_AILERON_BOOST) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, sue_YAWKP_AILERON); + _mav_put_float(buf, 4, sue_YAWKD_AILERON); + _mav_put_float(buf, 8, sue_ROLLKP); + _mav_put_float(buf, 12, sue_ROLLKD); + _mav_put_float(buf, 16, sue_YAW_STABILIZATION_AILERON); + _mav_put_float(buf, 20, sue_AILERON_BOOST); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F5, buf, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F5_LEN, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F5_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F5, buf, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F5_LEN); +#endif +#else + mavlink_serial_udb_extra_f5_t *packet = (mavlink_serial_udb_extra_f5_t *)msgbuf; + packet->sue_YAWKP_AILERON = sue_YAWKP_AILERON; + packet->sue_YAWKD_AILERON = sue_YAWKD_AILERON; + packet->sue_ROLLKP = sue_ROLLKP; + packet->sue_ROLLKD = sue_ROLLKD; + packet->sue_YAW_STABILIZATION_AILERON = sue_YAW_STABILIZATION_AILERON; + packet->sue_AILERON_BOOST = sue_AILERON_BOOST; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F5, (const char *)packet, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F5_LEN, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F5_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F5, (const char *)packet, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F5_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SERIAL_UDB_EXTRA_F5 UNPACKING diff --git a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f6.h b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f6.h index 656103d09..0eb24c986 100644 --- a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f6.h +++ b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f6.h @@ -190,6 +190,46 @@ static inline void mavlink_msg_serial_udb_extra_f6_send(mavlink_channel_t chan, #endif } +#if MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F6_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_serial_udb_extra_f6_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, float sue_PITCHGAIN, float sue_PITCHKD, float sue_RUDDER_ELEV_MIX, float sue_ROLL_ELEV_MIX, float sue_ELEVATOR_BOOST) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, sue_PITCHGAIN); + _mav_put_float(buf, 4, sue_PITCHKD); + _mav_put_float(buf, 8, sue_RUDDER_ELEV_MIX); + _mav_put_float(buf, 12, sue_ROLL_ELEV_MIX); + _mav_put_float(buf, 16, sue_ELEVATOR_BOOST); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F6, buf, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F6_LEN, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F6_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F6, buf, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F6_LEN); +#endif +#else + mavlink_serial_udb_extra_f6_t *packet = (mavlink_serial_udb_extra_f6_t *)msgbuf; + packet->sue_PITCHGAIN = sue_PITCHGAIN; + packet->sue_PITCHKD = sue_PITCHKD; + packet->sue_RUDDER_ELEV_MIX = sue_RUDDER_ELEV_MIX; + packet->sue_ROLL_ELEV_MIX = sue_ROLL_ELEV_MIX; + packet->sue_ELEVATOR_BOOST = sue_ELEVATOR_BOOST; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F6, (const char *)packet, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F6_LEN, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F6_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F6, (const char *)packet, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F6_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SERIAL_UDB_EXTRA_F6 UNPACKING diff --git a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f7.h b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f7.h index 51c98e6b7..58de7d01c 100644 --- a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f7.h +++ b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f7.h @@ -201,6 +201,48 @@ static inline void mavlink_msg_serial_udb_extra_f7_send(mavlink_channel_t chan, #endif } +#if MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F7_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_serial_udb_extra_f7_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, float sue_YAWKP_RUDDER, float sue_YAWKD_RUDDER, float sue_ROLLKP_RUDDER, float sue_ROLLKD_RUDDER, float sue_RUDDER_BOOST, float sue_RTL_PITCH_DOWN) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, sue_YAWKP_RUDDER); + _mav_put_float(buf, 4, sue_YAWKD_RUDDER); + _mav_put_float(buf, 8, sue_ROLLKP_RUDDER); + _mav_put_float(buf, 12, sue_ROLLKD_RUDDER); + _mav_put_float(buf, 16, sue_RUDDER_BOOST); + _mav_put_float(buf, 20, sue_RTL_PITCH_DOWN); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F7, buf, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F7_LEN, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F7_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F7, buf, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F7_LEN); +#endif +#else + mavlink_serial_udb_extra_f7_t *packet = (mavlink_serial_udb_extra_f7_t *)msgbuf; + packet->sue_YAWKP_RUDDER = sue_YAWKP_RUDDER; + packet->sue_YAWKD_RUDDER = sue_YAWKD_RUDDER; + packet->sue_ROLLKP_RUDDER = sue_ROLLKP_RUDDER; + packet->sue_ROLLKD_RUDDER = sue_ROLLKD_RUDDER; + packet->sue_RUDDER_BOOST = sue_RUDDER_BOOST; + packet->sue_RTL_PITCH_DOWN = sue_RTL_PITCH_DOWN; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F7, (const char *)packet, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F7_LEN, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F7_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F7, (const char *)packet, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F7_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SERIAL_UDB_EXTRA_F7 UNPACKING diff --git a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f8.h b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f8.h index 8557a95e2..5cab81655 100644 --- a/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f8.h +++ b/mavlink/include/mavlink/v1.0/matrixpilot/mavlink_msg_serial_udb_extra_f8.h @@ -212,6 +212,50 @@ static inline void mavlink_msg_serial_udb_extra_f8_send(mavlink_channel_t chan, #endif } +#if MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F8_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_serial_udb_extra_f8_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, float sue_HEIGHT_TARGET_MAX, float sue_HEIGHT_TARGET_MIN, float sue_ALT_HOLD_THROTTLE_MIN, float sue_ALT_HOLD_THROTTLE_MAX, float sue_ALT_HOLD_PITCH_MIN, float sue_ALT_HOLD_PITCH_MAX, float sue_ALT_HOLD_PITCH_HIGH) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, sue_HEIGHT_TARGET_MAX); + _mav_put_float(buf, 4, sue_HEIGHT_TARGET_MIN); + _mav_put_float(buf, 8, sue_ALT_HOLD_THROTTLE_MIN); + _mav_put_float(buf, 12, sue_ALT_HOLD_THROTTLE_MAX); + _mav_put_float(buf, 16, sue_ALT_HOLD_PITCH_MIN); + _mav_put_float(buf, 20, sue_ALT_HOLD_PITCH_MAX); + _mav_put_float(buf, 24, sue_ALT_HOLD_PITCH_HIGH); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F8, buf, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F8_LEN, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F8_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F8, buf, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F8_LEN); +#endif +#else + mavlink_serial_udb_extra_f8_t *packet = (mavlink_serial_udb_extra_f8_t *)msgbuf; + packet->sue_HEIGHT_TARGET_MAX = sue_HEIGHT_TARGET_MAX; + packet->sue_HEIGHT_TARGET_MIN = sue_HEIGHT_TARGET_MIN; + packet->sue_ALT_HOLD_THROTTLE_MIN = sue_ALT_HOLD_THROTTLE_MIN; + packet->sue_ALT_HOLD_THROTTLE_MAX = sue_ALT_HOLD_THROTTLE_MAX; + packet->sue_ALT_HOLD_PITCH_MIN = sue_ALT_HOLD_PITCH_MIN; + packet->sue_ALT_HOLD_PITCH_MAX = sue_ALT_HOLD_PITCH_MAX; + packet->sue_ALT_HOLD_PITCH_HIGH = sue_ALT_HOLD_PITCH_HIGH; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F8, (const char *)packet, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F8_LEN, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F8_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F8, (const char *)packet, MAVLINK_MSG_ID_SERIAL_UDB_EXTRA_F8_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SERIAL_UDB_EXTRA_F8 UNPACKING diff --git a/mavlink/include/mavlink/v1.0/matrixpilot/version.h b/mavlink/include/mavlink/v1.0/matrixpilot/version.h index a8be16c42..50cbda6c7 100644 --- a/mavlink/include/mavlink/v1.0/matrixpilot/version.h +++ b/mavlink/include/mavlink/v1.0/matrixpilot/version.h @@ -5,7 +5,7 @@ #ifndef MAVLINK_VERSION_H #define MAVLINK_VERSION_H -#define MAVLINK_BUILD_DATE "Tue Feb 4 15:28:04 2014" +#define MAVLINK_BUILD_DATE "Sun Apr 13 09:38:32 2014" #define MAVLINK_WIRE_PROTOCOL_VERSION "1.0" #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255 diff --git a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_attitude_control.h b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_attitude_control.h index ef5354d5e..f1cac9f2c 100644 --- a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_attitude_control.h +++ b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_attitude_control.h @@ -234,6 +234,54 @@ static inline void mavlink_msg_attitude_control_send(mavlink_channel_t chan, uin #endif } +#if MAVLINK_MSG_ID_ATTITUDE_CONTROL_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_attitude_control_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target, float roll, float pitch, float yaw, float thrust, uint8_t roll_manual, uint8_t pitch_manual, uint8_t yaw_manual, uint8_t thrust_manual) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, roll); + _mav_put_float(buf, 4, pitch); + _mav_put_float(buf, 8, yaw); + _mav_put_float(buf, 12, thrust); + _mav_put_uint8_t(buf, 16, target); + _mav_put_uint8_t(buf, 17, roll_manual); + _mav_put_uint8_t(buf, 18, pitch_manual); + _mav_put_uint8_t(buf, 19, yaw_manual); + _mav_put_uint8_t(buf, 20, thrust_manual); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ATTITUDE_CONTROL, buf, MAVLINK_MSG_ID_ATTITUDE_CONTROL_LEN, MAVLINK_MSG_ID_ATTITUDE_CONTROL_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ATTITUDE_CONTROL, buf, MAVLINK_MSG_ID_ATTITUDE_CONTROL_LEN); +#endif +#else + mavlink_attitude_control_t *packet = (mavlink_attitude_control_t *)msgbuf; + packet->roll = roll; + packet->pitch = pitch; + packet->yaw = yaw; + packet->thrust = thrust; + packet->target = target; + packet->roll_manual = roll_manual; + packet->pitch_manual = pitch_manual; + packet->yaw_manual = yaw_manual; + packet->thrust_manual = thrust_manual; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ATTITUDE_CONTROL, (const char *)packet, MAVLINK_MSG_ID_ATTITUDE_CONTROL_LEN, MAVLINK_MSG_ID_ATTITUDE_CONTROL_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ATTITUDE_CONTROL, (const char *)packet, MAVLINK_MSG_ID_ATTITUDE_CONTROL_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE ATTITUDE_CONTROL UNPACKING diff --git a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_brief_feature.h b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_brief_feature.h index d41093792..7bc27982a 100644 --- a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_brief_feature.h +++ b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_brief_feature.h @@ -217,6 +217,50 @@ static inline void mavlink_msg_brief_feature_send(mavlink_channel_t chan, float #endif } +#if MAVLINK_MSG_ID_BRIEF_FEATURE_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_brief_feature_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, float x, float y, float z, uint8_t orientation_assignment, uint16_t size, uint16_t orientation, const uint8_t *descriptor, float response) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, x); + _mav_put_float(buf, 4, y); + _mav_put_float(buf, 8, z); + _mav_put_float(buf, 12, response); + _mav_put_uint16_t(buf, 16, size); + _mav_put_uint16_t(buf, 18, orientation); + _mav_put_uint8_t(buf, 20, orientation_assignment); + _mav_put_uint8_t_array(buf, 21, descriptor, 32); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_BRIEF_FEATURE, buf, MAVLINK_MSG_ID_BRIEF_FEATURE_LEN, MAVLINK_MSG_ID_BRIEF_FEATURE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_BRIEF_FEATURE, buf, MAVLINK_MSG_ID_BRIEF_FEATURE_LEN); +#endif +#else + mavlink_brief_feature_t *packet = (mavlink_brief_feature_t *)msgbuf; + packet->x = x; + packet->y = y; + packet->z = z; + packet->response = response; + packet->size = size; + packet->orientation = orientation; + packet->orientation_assignment = orientation_assignment; + mav_array_memcpy(packet->descriptor, descriptor, sizeof(uint8_t)*32); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_BRIEF_FEATURE, (const char *)packet, MAVLINK_MSG_ID_BRIEF_FEATURE_LEN, MAVLINK_MSG_ID_BRIEF_FEATURE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_BRIEF_FEATURE, (const char *)packet, MAVLINK_MSG_ID_BRIEF_FEATURE_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE BRIEF_FEATURE UNPACKING diff --git a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_image_available.h b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_image_available.h index ae4db825d..37270d49c 100644 --- a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_image_available.h +++ b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_image_available.h @@ -388,6 +388,82 @@ static inline void mavlink_msg_image_available_send(mavlink_channel_t chan, uint #endif } +#if MAVLINK_MSG_ID_IMAGE_AVAILABLE_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_image_available_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint64_t cam_id, uint8_t cam_no, uint64_t timestamp, uint64_t valid_until, uint32_t img_seq, uint32_t img_buf_index, uint16_t width, uint16_t height, uint16_t depth, uint8_t channels, uint32_t key, uint32_t exposure, float gain, float roll, float pitch, float yaw, float local_z, float lat, float lon, float alt, float ground_x, float ground_y, float ground_z) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint64_t(buf, 0, cam_id); + _mav_put_uint64_t(buf, 8, timestamp); + _mav_put_uint64_t(buf, 16, valid_until); + _mav_put_uint32_t(buf, 24, img_seq); + _mav_put_uint32_t(buf, 28, img_buf_index); + _mav_put_uint32_t(buf, 32, key); + _mav_put_uint32_t(buf, 36, exposure); + _mav_put_float(buf, 40, gain); + _mav_put_float(buf, 44, roll); + _mav_put_float(buf, 48, pitch); + _mav_put_float(buf, 52, yaw); + _mav_put_float(buf, 56, local_z); + _mav_put_float(buf, 60, lat); + _mav_put_float(buf, 64, lon); + _mav_put_float(buf, 68, alt); + _mav_put_float(buf, 72, ground_x); + _mav_put_float(buf, 76, ground_y); + _mav_put_float(buf, 80, ground_z); + _mav_put_uint16_t(buf, 84, width); + _mav_put_uint16_t(buf, 86, height); + _mav_put_uint16_t(buf, 88, depth); + _mav_put_uint8_t(buf, 90, cam_no); + _mav_put_uint8_t(buf, 91, channels); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_IMAGE_AVAILABLE, buf, MAVLINK_MSG_ID_IMAGE_AVAILABLE_LEN, MAVLINK_MSG_ID_IMAGE_AVAILABLE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_IMAGE_AVAILABLE, buf, MAVLINK_MSG_ID_IMAGE_AVAILABLE_LEN); +#endif +#else + mavlink_image_available_t *packet = (mavlink_image_available_t *)msgbuf; + packet->cam_id = cam_id; + packet->timestamp = timestamp; + packet->valid_until = valid_until; + packet->img_seq = img_seq; + packet->img_buf_index = img_buf_index; + packet->key = key; + packet->exposure = exposure; + packet->gain = gain; + packet->roll = roll; + packet->pitch = pitch; + packet->yaw = yaw; + packet->local_z = local_z; + packet->lat = lat; + packet->lon = lon; + packet->alt = alt; + packet->ground_x = ground_x; + packet->ground_y = ground_y; + packet->ground_z = ground_z; + packet->width = width; + packet->height = height; + packet->depth = depth; + packet->cam_no = cam_no; + packet->channels = channels; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_IMAGE_AVAILABLE, (const char *)packet, MAVLINK_MSG_ID_IMAGE_AVAILABLE_LEN, MAVLINK_MSG_ID_IMAGE_AVAILABLE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_IMAGE_AVAILABLE, (const char *)packet, MAVLINK_MSG_ID_IMAGE_AVAILABLE_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE IMAGE_AVAILABLE UNPACKING diff --git a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_image_trigger_control.h b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_image_trigger_control.h index 664574be9..85f8eff55 100644 --- a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_image_trigger_control.h +++ b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_image_trigger_control.h @@ -146,6 +146,38 @@ static inline void mavlink_msg_image_trigger_control_send(mavlink_channel_t chan #endif } +#if MAVLINK_MSG_ID_IMAGE_TRIGGER_CONTROL_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_image_trigger_control_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t enable) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint8_t(buf, 0, enable); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_IMAGE_TRIGGER_CONTROL, buf, MAVLINK_MSG_ID_IMAGE_TRIGGER_CONTROL_LEN, MAVLINK_MSG_ID_IMAGE_TRIGGER_CONTROL_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_IMAGE_TRIGGER_CONTROL, buf, MAVLINK_MSG_ID_IMAGE_TRIGGER_CONTROL_LEN); +#endif +#else + mavlink_image_trigger_control_t *packet = (mavlink_image_trigger_control_t *)msgbuf; + packet->enable = enable; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_IMAGE_TRIGGER_CONTROL, (const char *)packet, MAVLINK_MSG_ID_IMAGE_TRIGGER_CONTROL_LEN, MAVLINK_MSG_ID_IMAGE_TRIGGER_CONTROL_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_IMAGE_TRIGGER_CONTROL, (const char *)packet, MAVLINK_MSG_ID_IMAGE_TRIGGER_CONTROL_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE IMAGE_TRIGGER_CONTROL UNPACKING diff --git a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_image_triggered.h b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_image_triggered.h index f3a2243af..b438c74ea 100644 --- a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_image_triggered.h +++ b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_image_triggered.h @@ -267,6 +267,60 @@ static inline void mavlink_msg_image_triggered_send(mavlink_channel_t chan, uint #endif } +#if MAVLINK_MSG_ID_IMAGE_TRIGGERED_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_image_triggered_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint64_t timestamp, uint32_t seq, float roll, float pitch, float yaw, float local_z, float lat, float lon, float alt, float ground_x, float ground_y, float ground_z) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint64_t(buf, 0, timestamp); + _mav_put_uint32_t(buf, 8, seq); + _mav_put_float(buf, 12, roll); + _mav_put_float(buf, 16, pitch); + _mav_put_float(buf, 20, yaw); + _mav_put_float(buf, 24, local_z); + _mav_put_float(buf, 28, lat); + _mav_put_float(buf, 32, lon); + _mav_put_float(buf, 36, alt); + _mav_put_float(buf, 40, ground_x); + _mav_put_float(buf, 44, ground_y); + _mav_put_float(buf, 48, ground_z); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_IMAGE_TRIGGERED, buf, MAVLINK_MSG_ID_IMAGE_TRIGGERED_LEN, MAVLINK_MSG_ID_IMAGE_TRIGGERED_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_IMAGE_TRIGGERED, buf, MAVLINK_MSG_ID_IMAGE_TRIGGERED_LEN); +#endif +#else + mavlink_image_triggered_t *packet = (mavlink_image_triggered_t *)msgbuf; + packet->timestamp = timestamp; + packet->seq = seq; + packet->roll = roll; + packet->pitch = pitch; + packet->yaw = yaw; + packet->local_z = local_z; + packet->lat = lat; + packet->lon = lon; + packet->alt = alt; + packet->ground_x = ground_x; + packet->ground_y = ground_y; + packet->ground_z = ground_z; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_IMAGE_TRIGGERED, (const char *)packet, MAVLINK_MSG_ID_IMAGE_TRIGGERED_LEN, MAVLINK_MSG_ID_IMAGE_TRIGGERED_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_IMAGE_TRIGGERED, (const char *)packet, MAVLINK_MSG_ID_IMAGE_TRIGGERED_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE IMAGE_TRIGGERED UNPACKING diff --git a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_marker.h b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_marker.h index 6bdcceaf9..05452637e 100644 --- a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_marker.h +++ b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_marker.h @@ -212,6 +212,50 @@ static inline void mavlink_msg_marker_send(mavlink_channel_t chan, uint16_t id, #endif } +#if MAVLINK_MSG_ID_MARKER_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_marker_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint16_t id, float x, float y, float z, float roll, float pitch, float yaw) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, x); + _mav_put_float(buf, 4, y); + _mav_put_float(buf, 8, z); + _mav_put_float(buf, 12, roll); + _mav_put_float(buf, 16, pitch); + _mav_put_float(buf, 20, yaw); + _mav_put_uint16_t(buf, 24, id); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MARKER, buf, MAVLINK_MSG_ID_MARKER_LEN, MAVLINK_MSG_ID_MARKER_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MARKER, buf, MAVLINK_MSG_ID_MARKER_LEN); +#endif +#else + mavlink_marker_t *packet = (mavlink_marker_t *)msgbuf; + packet->x = x; + packet->y = y; + packet->z = z; + packet->roll = roll; + packet->pitch = pitch; + packet->yaw = yaw; + packet->id = id; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MARKER, (const char *)packet, MAVLINK_MSG_ID_MARKER_LEN, MAVLINK_MSG_ID_MARKER_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MARKER, (const char *)packet, MAVLINK_MSG_ID_MARKER_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE MARKER UNPACKING diff --git a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_pattern_detected.h b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_pattern_detected.h index aa7b827a3..bde400da9 100644 --- a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_pattern_detected.h +++ b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_pattern_detected.h @@ -173,6 +173,42 @@ static inline void mavlink_msg_pattern_detected_send(mavlink_channel_t chan, uin #endif } +#if MAVLINK_MSG_ID_PATTERN_DETECTED_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_pattern_detected_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t type, float confidence, const char *file, uint8_t detected) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, confidence); + _mav_put_uint8_t(buf, 4, type); + _mav_put_uint8_t(buf, 105, detected); + _mav_put_char_array(buf, 5, file, 100); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PATTERN_DETECTED, buf, MAVLINK_MSG_ID_PATTERN_DETECTED_LEN, MAVLINK_MSG_ID_PATTERN_DETECTED_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PATTERN_DETECTED, buf, MAVLINK_MSG_ID_PATTERN_DETECTED_LEN); +#endif +#else + mavlink_pattern_detected_t *packet = (mavlink_pattern_detected_t *)msgbuf; + packet->confidence = confidence; + packet->type = type; + packet->detected = detected; + mav_array_memcpy(packet->file, file, sizeof(char)*100); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PATTERN_DETECTED, (const char *)packet, MAVLINK_MSG_ID_PATTERN_DETECTED_LEN, MAVLINK_MSG_ID_PATTERN_DETECTED_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PATTERN_DETECTED, (const char *)packet, MAVLINK_MSG_ID_PATTERN_DETECTED_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE PATTERN_DETECTED UNPACKING diff --git a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_point_of_interest.h b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_point_of_interest.h index 913a52897..86e934519 100644 --- a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_point_of_interest.h +++ b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_point_of_interest.h @@ -217,6 +217,50 @@ static inline void mavlink_msg_point_of_interest_send(mavlink_channel_t chan, ui #endif } +#if MAVLINK_MSG_ID_POINT_OF_INTEREST_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_point_of_interest_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t type, uint8_t color, uint8_t coordinate_system, uint16_t timeout, float x, float y, float z, const char *name) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, x); + _mav_put_float(buf, 4, y); + _mav_put_float(buf, 8, z); + _mav_put_uint16_t(buf, 12, timeout); + _mav_put_uint8_t(buf, 14, type); + _mav_put_uint8_t(buf, 15, color); + _mav_put_uint8_t(buf, 16, coordinate_system); + _mav_put_char_array(buf, 17, name, 26); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_POINT_OF_INTEREST, buf, MAVLINK_MSG_ID_POINT_OF_INTEREST_LEN, MAVLINK_MSG_ID_POINT_OF_INTEREST_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_POINT_OF_INTEREST, buf, MAVLINK_MSG_ID_POINT_OF_INTEREST_LEN); +#endif +#else + mavlink_point_of_interest_t *packet = (mavlink_point_of_interest_t *)msgbuf; + packet->x = x; + packet->y = y; + packet->z = z; + packet->timeout = timeout; + packet->type = type; + packet->color = color; + packet->coordinate_system = coordinate_system; + mav_array_memcpy(packet->name, name, sizeof(char)*26); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_POINT_OF_INTEREST, (const char *)packet, MAVLINK_MSG_ID_POINT_OF_INTEREST_LEN, MAVLINK_MSG_ID_POINT_OF_INTEREST_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_POINT_OF_INTEREST, (const char *)packet, MAVLINK_MSG_ID_POINT_OF_INTEREST_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE POINT_OF_INTEREST UNPACKING diff --git a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_point_of_interest_connection.h b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_point_of_interest_connection.h index e24436431..e5c04a851 100644 --- a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_point_of_interest_connection.h +++ b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_point_of_interest_connection.h @@ -250,6 +250,56 @@ static inline void mavlink_msg_point_of_interest_connection_send(mavlink_channel #endif } +#if MAVLINK_MSG_ID_POINT_OF_INTEREST_CONNECTION_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_point_of_interest_connection_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t type, uint8_t color, uint8_t coordinate_system, uint16_t timeout, float xp1, float yp1, float zp1, float xp2, float yp2, float zp2, const char *name) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, xp1); + _mav_put_float(buf, 4, yp1); + _mav_put_float(buf, 8, zp1); + _mav_put_float(buf, 12, xp2); + _mav_put_float(buf, 16, yp2); + _mav_put_float(buf, 20, zp2); + _mav_put_uint16_t(buf, 24, timeout); + _mav_put_uint8_t(buf, 26, type); + _mav_put_uint8_t(buf, 27, color); + _mav_put_uint8_t(buf, 28, coordinate_system); + _mav_put_char_array(buf, 29, name, 26); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_POINT_OF_INTEREST_CONNECTION, buf, MAVLINK_MSG_ID_POINT_OF_INTEREST_CONNECTION_LEN, MAVLINK_MSG_ID_POINT_OF_INTEREST_CONNECTION_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_POINT_OF_INTEREST_CONNECTION, buf, MAVLINK_MSG_ID_POINT_OF_INTEREST_CONNECTION_LEN); +#endif +#else + mavlink_point_of_interest_connection_t *packet = (mavlink_point_of_interest_connection_t *)msgbuf; + packet->xp1 = xp1; + packet->yp1 = yp1; + packet->zp1 = zp1; + packet->xp2 = xp2; + packet->yp2 = yp2; + packet->zp2 = zp2; + packet->timeout = timeout; + packet->type = type; + packet->color = color; + packet->coordinate_system = coordinate_system; + mav_array_memcpy(packet->name, name, sizeof(char)*26); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_POINT_OF_INTEREST_CONNECTION, (const char *)packet, MAVLINK_MSG_ID_POINT_OF_INTEREST_CONNECTION_LEN, MAVLINK_MSG_ID_POINT_OF_INTEREST_CONNECTION_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_POINT_OF_INTEREST_CONNECTION, (const char *)packet, MAVLINK_MSG_ID_POINT_OF_INTEREST_CONNECTION_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE POINT_OF_INTEREST_CONNECTION UNPACKING diff --git a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_position_control_setpoint.h b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_position_control_setpoint.h index 6f4ca510a..480004cef 100644 --- a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_position_control_setpoint.h +++ b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_position_control_setpoint.h @@ -190,6 +190,46 @@ static inline void mavlink_msg_position_control_setpoint_send(mavlink_channel_t #endif } +#if MAVLINK_MSG_ID_POSITION_CONTROL_SETPOINT_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_position_control_setpoint_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint16_t id, float x, float y, float z, float yaw) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, x); + _mav_put_float(buf, 4, y); + _mav_put_float(buf, 8, z); + _mav_put_float(buf, 12, yaw); + _mav_put_uint16_t(buf, 16, id); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_POSITION_CONTROL_SETPOINT, buf, MAVLINK_MSG_ID_POSITION_CONTROL_SETPOINT_LEN, MAVLINK_MSG_ID_POSITION_CONTROL_SETPOINT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_POSITION_CONTROL_SETPOINT, buf, MAVLINK_MSG_ID_POSITION_CONTROL_SETPOINT_LEN); +#endif +#else + mavlink_position_control_setpoint_t *packet = (mavlink_position_control_setpoint_t *)msgbuf; + packet->x = x; + packet->y = y; + packet->z = z; + packet->yaw = yaw; + packet->id = id; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_POSITION_CONTROL_SETPOINT, (const char *)packet, MAVLINK_MSG_ID_POSITION_CONTROL_SETPOINT_LEN, MAVLINK_MSG_ID_POSITION_CONTROL_SETPOINT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_POSITION_CONTROL_SETPOINT, (const char *)packet, MAVLINK_MSG_ID_POSITION_CONTROL_SETPOINT_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE POSITION_CONTROL_SETPOINT UNPACKING diff --git a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_raw_aux.h b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_raw_aux.h index 08cedbb4b..41a512648 100644 --- a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_raw_aux.h +++ b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_raw_aux.h @@ -212,6 +212,50 @@ static inline void mavlink_msg_raw_aux_send(mavlink_channel_t chan, uint16_t adc #endif } +#if MAVLINK_MSG_ID_RAW_AUX_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_raw_aux_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint16_t adc1, uint16_t adc2, uint16_t adc3, uint16_t adc4, uint16_t vbat, int16_t temp, int32_t baro) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_int32_t(buf, 0, baro); + _mav_put_uint16_t(buf, 4, adc1); + _mav_put_uint16_t(buf, 6, adc2); + _mav_put_uint16_t(buf, 8, adc3); + _mav_put_uint16_t(buf, 10, adc4); + _mav_put_uint16_t(buf, 12, vbat); + _mav_put_int16_t(buf, 14, temp); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RAW_AUX, buf, MAVLINK_MSG_ID_RAW_AUX_LEN, MAVLINK_MSG_ID_RAW_AUX_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RAW_AUX, buf, MAVLINK_MSG_ID_RAW_AUX_LEN); +#endif +#else + mavlink_raw_aux_t *packet = (mavlink_raw_aux_t *)msgbuf; + packet->baro = baro; + packet->adc1 = adc1; + packet->adc2 = adc2; + packet->adc3 = adc3; + packet->adc4 = adc4; + packet->vbat = vbat; + packet->temp = temp; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RAW_AUX, (const char *)packet, MAVLINK_MSG_ID_RAW_AUX_LEN, MAVLINK_MSG_ID_RAW_AUX_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_RAW_AUX, (const char *)packet, MAVLINK_MSG_ID_RAW_AUX_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE RAW_AUX UNPACKING diff --git a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_set_cam_shutter.h b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_set_cam_shutter.h index b26d748c2..8fe14dd54 100644 --- a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_set_cam_shutter.h +++ b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_set_cam_shutter.h @@ -201,6 +201,48 @@ static inline void mavlink_msg_set_cam_shutter_send(mavlink_channel_t chan, uint #endif } +#if MAVLINK_MSG_ID_SET_CAM_SHUTTER_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_set_cam_shutter_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t cam_no, uint8_t cam_mode, uint8_t trigger_pin, uint16_t interval, uint16_t exposure, float gain) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, gain); + _mav_put_uint16_t(buf, 4, interval); + _mav_put_uint16_t(buf, 6, exposure); + _mav_put_uint8_t(buf, 8, cam_no); + _mav_put_uint8_t(buf, 9, cam_mode); + _mav_put_uint8_t(buf, 10, trigger_pin); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_CAM_SHUTTER, buf, MAVLINK_MSG_ID_SET_CAM_SHUTTER_LEN, MAVLINK_MSG_ID_SET_CAM_SHUTTER_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_CAM_SHUTTER, buf, MAVLINK_MSG_ID_SET_CAM_SHUTTER_LEN); +#endif +#else + mavlink_set_cam_shutter_t *packet = (mavlink_set_cam_shutter_t *)msgbuf; + packet->gain = gain; + packet->interval = interval; + packet->exposure = exposure; + packet->cam_no = cam_no; + packet->cam_mode = cam_mode; + packet->trigger_pin = trigger_pin; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_CAM_SHUTTER, (const char *)packet, MAVLINK_MSG_ID_SET_CAM_SHUTTER_LEN, MAVLINK_MSG_ID_SET_CAM_SHUTTER_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_CAM_SHUTTER, (const char *)packet, MAVLINK_MSG_ID_SET_CAM_SHUTTER_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SET_CAM_SHUTTER UNPACKING diff --git a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_set_position_control_offset.h b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_set_position_control_offset.h index f1f9e698f..c4e4fc19a 100644 --- a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_set_position_control_offset.h +++ b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_set_position_control_offset.h @@ -201,6 +201,48 @@ static inline void mavlink_msg_set_position_control_offset_send(mavlink_channel_ #endif } +#if MAVLINK_MSG_ID_SET_POSITION_CONTROL_OFFSET_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_set_position_control_offset_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, float x, float y, float z, float yaw) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, x); + _mav_put_float(buf, 4, y); + _mav_put_float(buf, 8, z); + _mav_put_float(buf, 12, yaw); + _mav_put_uint8_t(buf, 16, target_system); + _mav_put_uint8_t(buf, 17, target_component); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_POSITION_CONTROL_OFFSET, buf, MAVLINK_MSG_ID_SET_POSITION_CONTROL_OFFSET_LEN, MAVLINK_MSG_ID_SET_POSITION_CONTROL_OFFSET_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_POSITION_CONTROL_OFFSET, buf, MAVLINK_MSG_ID_SET_POSITION_CONTROL_OFFSET_LEN); +#endif +#else + mavlink_set_position_control_offset_t *packet = (mavlink_set_position_control_offset_t *)msgbuf; + packet->x = x; + packet->y = y; + packet->z = z; + packet->yaw = yaw; + packet->target_system = target_system; + packet->target_component = target_component; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_POSITION_CONTROL_OFFSET, (const char *)packet, MAVLINK_MSG_ID_SET_POSITION_CONTROL_OFFSET_LEN, MAVLINK_MSG_ID_SET_POSITION_CONTROL_OFFSET_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_POSITION_CONTROL_OFFSET, (const char *)packet, MAVLINK_MSG_ID_SET_POSITION_CONTROL_OFFSET_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SET_POSITION_CONTROL_OFFSET UNPACKING diff --git a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_watchdog_command.h b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_watchdog_command.h index 9458087da..d71a2ed2e 100644 --- a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_watchdog_command.h +++ b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_watchdog_command.h @@ -179,6 +179,44 @@ static inline void mavlink_msg_watchdog_command_send(mavlink_channel_t chan, uin #endif } +#if MAVLINK_MSG_ID_WATCHDOG_COMMAND_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_watchdog_command_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system_id, uint16_t watchdog_id, uint16_t process_id, uint8_t command_id) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint16_t(buf, 0, watchdog_id); + _mav_put_uint16_t(buf, 2, process_id); + _mav_put_uint8_t(buf, 4, target_system_id); + _mav_put_uint8_t(buf, 5, command_id); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_WATCHDOG_COMMAND, buf, MAVLINK_MSG_ID_WATCHDOG_COMMAND_LEN, MAVLINK_MSG_ID_WATCHDOG_COMMAND_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_WATCHDOG_COMMAND, buf, MAVLINK_MSG_ID_WATCHDOG_COMMAND_LEN); +#endif +#else + mavlink_watchdog_command_t *packet = (mavlink_watchdog_command_t *)msgbuf; + packet->watchdog_id = watchdog_id; + packet->process_id = process_id; + packet->target_system_id = target_system_id; + packet->command_id = command_id; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_WATCHDOG_COMMAND, (const char *)packet, MAVLINK_MSG_ID_WATCHDOG_COMMAND_LEN, MAVLINK_MSG_ID_WATCHDOG_COMMAND_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_WATCHDOG_COMMAND, (const char *)packet, MAVLINK_MSG_ID_WATCHDOG_COMMAND_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE WATCHDOG_COMMAND UNPACKING diff --git a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_watchdog_heartbeat.h b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_watchdog_heartbeat.h index 3f4295ee5..a8e49b642 100644 --- a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_watchdog_heartbeat.h +++ b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_watchdog_heartbeat.h @@ -157,6 +157,40 @@ static inline void mavlink_msg_watchdog_heartbeat_send(mavlink_channel_t chan, u #endif } +#if MAVLINK_MSG_ID_WATCHDOG_HEARTBEAT_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_watchdog_heartbeat_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint16_t watchdog_id, uint16_t process_count) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint16_t(buf, 0, watchdog_id); + _mav_put_uint16_t(buf, 2, process_count); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_WATCHDOG_HEARTBEAT, buf, MAVLINK_MSG_ID_WATCHDOG_HEARTBEAT_LEN, MAVLINK_MSG_ID_WATCHDOG_HEARTBEAT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_WATCHDOG_HEARTBEAT, buf, MAVLINK_MSG_ID_WATCHDOG_HEARTBEAT_LEN); +#endif +#else + mavlink_watchdog_heartbeat_t *packet = (mavlink_watchdog_heartbeat_t *)msgbuf; + packet->watchdog_id = watchdog_id; + packet->process_count = process_count; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_WATCHDOG_HEARTBEAT, (const char *)packet, MAVLINK_MSG_ID_WATCHDOG_HEARTBEAT_LEN, MAVLINK_MSG_ID_WATCHDOG_HEARTBEAT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_WATCHDOG_HEARTBEAT, (const char *)packet, MAVLINK_MSG_ID_WATCHDOG_HEARTBEAT_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE WATCHDOG_HEARTBEAT UNPACKING diff --git a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_watchdog_process_info.h b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_watchdog_process_info.h index 55853cdde..a5e0cc67e 100644 --- a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_watchdog_process_info.h +++ b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_watchdog_process_info.h @@ -185,6 +185,44 @@ static inline void mavlink_msg_watchdog_process_info_send(mavlink_channel_t chan #endif } +#if MAVLINK_MSG_ID_WATCHDOG_PROCESS_INFO_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_watchdog_process_info_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint16_t watchdog_id, uint16_t process_id, const char *name, const char *arguments, int32_t timeout) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_int32_t(buf, 0, timeout); + _mav_put_uint16_t(buf, 4, watchdog_id); + _mav_put_uint16_t(buf, 6, process_id); + _mav_put_char_array(buf, 8, name, 100); + _mav_put_char_array(buf, 108, arguments, 147); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_WATCHDOG_PROCESS_INFO, buf, MAVLINK_MSG_ID_WATCHDOG_PROCESS_INFO_LEN, MAVLINK_MSG_ID_WATCHDOG_PROCESS_INFO_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_WATCHDOG_PROCESS_INFO, buf, MAVLINK_MSG_ID_WATCHDOG_PROCESS_INFO_LEN); +#endif +#else + mavlink_watchdog_process_info_t *packet = (mavlink_watchdog_process_info_t *)msgbuf; + packet->timeout = timeout; + packet->watchdog_id = watchdog_id; + packet->process_id = process_id; + mav_array_memcpy(packet->name, name, sizeof(char)*100); + mav_array_memcpy(packet->arguments, arguments, sizeof(char)*147); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_WATCHDOG_PROCESS_INFO, (const char *)packet, MAVLINK_MSG_ID_WATCHDOG_PROCESS_INFO_LEN, MAVLINK_MSG_ID_WATCHDOG_PROCESS_INFO_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_WATCHDOG_PROCESS_INFO, (const char *)packet, MAVLINK_MSG_ID_WATCHDOG_PROCESS_INFO_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE WATCHDOG_PROCESS_INFO UNPACKING diff --git a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_watchdog_process_status.h b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_watchdog_process_status.h index a0410d803..15c9598e4 100644 --- a/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_watchdog_process_status.h +++ b/mavlink/include/mavlink/v1.0/pixhawk/mavlink_msg_watchdog_process_status.h @@ -201,6 +201,48 @@ static inline void mavlink_msg_watchdog_process_status_send(mavlink_channel_t ch #endif } +#if MAVLINK_MSG_ID_WATCHDOG_PROCESS_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_watchdog_process_status_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint16_t watchdog_id, uint16_t process_id, uint8_t state, uint8_t muted, int32_t pid, uint16_t crashes) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_int32_t(buf, 0, pid); + _mav_put_uint16_t(buf, 4, watchdog_id); + _mav_put_uint16_t(buf, 6, process_id); + _mav_put_uint16_t(buf, 8, crashes); + _mav_put_uint8_t(buf, 10, state); + _mav_put_uint8_t(buf, 11, muted); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_WATCHDOG_PROCESS_STATUS, buf, MAVLINK_MSG_ID_WATCHDOG_PROCESS_STATUS_LEN, MAVLINK_MSG_ID_WATCHDOG_PROCESS_STATUS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_WATCHDOG_PROCESS_STATUS, buf, MAVLINK_MSG_ID_WATCHDOG_PROCESS_STATUS_LEN); +#endif +#else + mavlink_watchdog_process_status_t *packet = (mavlink_watchdog_process_status_t *)msgbuf; + packet->pid = pid; + packet->watchdog_id = watchdog_id; + packet->process_id = process_id; + packet->crashes = crashes; + packet->state = state; + packet->muted = muted; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_WATCHDOG_PROCESS_STATUS, (const char *)packet, MAVLINK_MSG_ID_WATCHDOG_PROCESS_STATUS_LEN, MAVLINK_MSG_ID_WATCHDOG_PROCESS_STATUS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_WATCHDOG_PROCESS_STATUS, (const char *)packet, MAVLINK_MSG_ID_WATCHDOG_PROCESS_STATUS_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE WATCHDOG_PROCESS_STATUS UNPACKING diff --git a/mavlink/include/mavlink/v1.0/pixhawk/pixhawk.h b/mavlink/include/mavlink/v1.0/pixhawk/pixhawk.h index 428619eed..a624a2579 100644 --- a/mavlink/include/mavlink/v1.0/pixhawk/pixhawk.h +++ b/mavlink/include/mavlink/v1.0/pixhawk/pixhawk.h @@ -12,15 +12,15 @@ extern "C" { // MESSAGE LENGTHS AND CRCS #ifndef MAVLINK_MESSAGE_LENGTHS -#define MAVLINK_MESSAGE_LENGTHS {9, 31, 12, 0, 14, 28, 3, 32, 0, 0, 0, 6, 0, 0, 0, 0, 0, 0, 0, 0, 20, 2, 25, 23, 30, 101, 22, 26, 16, 14, 28, 32, 28, 28, 22, 22, 21, 6, 6, 37, 4, 4, 2, 2, 4, 2, 2, 3, 13, 12, 19, 17, 15, 15, 27, 25, 18, 18, 20, 20, 9, 34, 26, 46, 36, 0, 6, 4, 0, 11, 18, 0, 0, 0, 20, 0, 33, 3, 0, 0, 20, 22, 0, 0, 0, 0, 0, 0, 0, 28, 56, 42, 33, 0, 0, 0, 0, 0, 0, 0, 26, 32, 32, 20, 32, 62, 54, 64, 84, 9, 254, 249, 9, 36, 26, 64, 22, 6, 14, 12, 97, 2, 2, 113, 35, 0, 0, 0, 0, 0, 13, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 24, 33, 25, 0, 11, 52, 1, 92, 0, 0, 0, 0, 0, 18, 0, 0, 0, 0, 0, 0, 0, 0, 0, 18, 26, 16, 0, 0, 0, 0, 0, 0, 0, 4, 255, 12, 6, 0, 0, 0, 0, 0, 0, 106, 43, 55, 0, 0, 53, 0, 0, 0, 0, 21, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 36, 30, 18, 18, 51, 9, 0} +#define MAVLINK_MESSAGE_LENGTHS {9, 31, 12, 0, 14, 28, 3, 32, 0, 0, 0, 6, 0, 0, 0, 0, 0, 0, 0, 0, 20, 2, 25, 23, 30, 101, 22, 26, 16, 14, 28, 32, 28, 28, 22, 22, 21, 6, 6, 37, 4, 4, 2, 2, 4, 2, 2, 3, 13, 12, 19, 17, 15, 15, 27, 25, 18, 18, 20, 20, 9, 34, 26, 46, 36, 42, 6, 4, 0, 11, 18, 0, 0, 0, 20, 0, 33, 3, 0, 0, 20, 22, 0, 0, 0, 0, 0, 0, 0, 28, 56, 42, 33, 0, 0, 0, 0, 0, 0, 0, 26, 32, 32, 20, 32, 62, 54, 64, 84, 9, 254, 249, 9, 36, 26, 64, 22, 6, 14, 12, 97, 2, 2, 113, 35, 6, 79, 0, 0, 0, 13, 255, 14, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 24, 33, 25, 0, 11, 52, 1, 92, 0, 0, 0, 0, 0, 18, 0, 0, 0, 0, 0, 0, 0, 0, 0, 18, 26, 16, 0, 0, 0, 0, 0, 0, 0, 4, 255, 12, 6, 0, 0, 0, 0, 0, 0, 106, 43, 55, 0, 0, 53, 0, 0, 0, 0, 21, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 36, 30, 18, 18, 51, 9, 0} #endif #ifndef MAVLINK_MESSAGE_CRCS -#define MAVLINK_MESSAGE_CRCS {50, 124, 137, 0, 237, 217, 104, 119, 0, 0, 0, 89, 0, 0, 0, 0, 0, 0, 0, 0, 214, 159, 220, 168, 24, 23, 170, 144, 67, 115, 39, 246, 185, 104, 237, 244, 222, 212, 9, 254, 230, 28, 28, 132, 221, 232, 11, 153, 41, 39, 214, 223, 141, 33, 15, 3, 100, 24, 239, 238, 30, 240, 183, 130, 130, 0, 148, 21, 0, 243, 124, 0, 0, 0, 20, 0, 152, 143, 0, 0, 127, 106, 0, 0, 0, 0, 0, 0, 0, 231, 183, 63, 54, 0, 0, 0, 0, 0, 0, 0, 175, 102, 158, 208, 56, 93, 211, 108, 32, 185, 235, 93, 124, 124, 119, 4, 76, 128, 56, 116, 134, 237, 203, 250, 87, 0, 0, 0, 0, 0, 29, 223, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 177, 241, 15, 0, 108, 86, 95, 224, 0, 0, 0, 0, 0, 22, 0, 0, 0, 0, 0, 0, 0, 0, 0, 28, 249, 182, 0, 0, 0, 0, 0, 0, 0, 153, 16, 29, 162, 0, 0, 0, 0, 0, 0, 90, 95, 36, 0, 0, 88, 0, 0, 0, 0, 254, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 204, 49, 170, 44, 83, 46, 0} +#define MAVLINK_MESSAGE_CRCS {50, 124, 137, 0, 237, 217, 104, 119, 0, 0, 0, 89, 0, 0, 0, 0, 0, 0, 0, 0, 214, 159, 220, 168, 24, 23, 170, 144, 67, 115, 39, 246, 185, 104, 237, 244, 222, 212, 9, 254, 230, 28, 28, 132, 221, 232, 11, 153, 41, 39, 214, 223, 141, 33, 15, 3, 100, 24, 239, 238, 30, 240, 183, 130, 130, 118, 148, 21, 0, 243, 124, 0, 0, 0, 20, 0, 152, 143, 0, 0, 127, 106, 0, 0, 0, 0, 0, 0, 0, 231, 183, 63, 54, 0, 0, 0, 0, 0, 0, 0, 175, 102, 158, 208, 56, 93, 211, 108, 32, 185, 235, 93, 124, 124, 119, 4, 76, 128, 56, 116, 134, 237, 203, 250, 87, 203, 220, 0, 0, 0, 29, 223, 85, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 177, 241, 15, 0, 108, 86, 95, 224, 0, 0, 0, 0, 0, 22, 0, 0, 0, 0, 0, 0, 0, 0, 0, 28, 249, 182, 0, 0, 0, 0, 0, 0, 0, 153, 16, 29, 162, 0, 0, 0, 0, 0, 0, 90, 95, 36, 0, 0, 88, 0, 0, 0, 0, 254, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 204, 49, 170, 44, 83, 46, 0} #endif #ifndef MAVLINK_MESSAGE_INFO -#define MAVLINK_MESSAGE_INFO {MAVLINK_MESSAGE_INFO_HEARTBEAT, MAVLINK_MESSAGE_INFO_SYS_STATUS, MAVLINK_MESSAGE_INFO_SYSTEM_TIME, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_PING, MAVLINK_MESSAGE_INFO_CHANGE_OPERATOR_CONTROL, MAVLINK_MESSAGE_INFO_CHANGE_OPERATOR_CONTROL_ACK, MAVLINK_MESSAGE_INFO_AUTH_KEY, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_SET_MODE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_PARAM_REQUEST_READ, MAVLINK_MESSAGE_INFO_PARAM_REQUEST_LIST, MAVLINK_MESSAGE_INFO_PARAM_VALUE, MAVLINK_MESSAGE_INFO_PARAM_SET, MAVLINK_MESSAGE_INFO_GPS_RAW_INT, MAVLINK_MESSAGE_INFO_GPS_STATUS, MAVLINK_MESSAGE_INFO_SCALED_IMU, MAVLINK_MESSAGE_INFO_RAW_IMU, MAVLINK_MESSAGE_INFO_RAW_PRESSURE, MAVLINK_MESSAGE_INFO_SCALED_PRESSURE, MAVLINK_MESSAGE_INFO_ATTITUDE, MAVLINK_MESSAGE_INFO_ATTITUDE_QUATERNION, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED, MAVLINK_MESSAGE_INFO_GLOBAL_POSITION_INT, MAVLINK_MESSAGE_INFO_RC_CHANNELS_SCALED, MAVLINK_MESSAGE_INFO_RC_CHANNELS_RAW, MAVLINK_MESSAGE_INFO_SERVO_OUTPUT_RAW, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_PARTIAL_LIST, MAVLINK_MESSAGE_INFO_MISSION_WRITE_PARTIAL_LIST, MAVLINK_MESSAGE_INFO_MISSION_ITEM, MAVLINK_MESSAGE_INFO_MISSION_REQUEST, MAVLINK_MESSAGE_INFO_MISSION_SET_CURRENT, MAVLINK_MESSAGE_INFO_MISSION_CURRENT, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_LIST, MAVLINK_MESSAGE_INFO_MISSION_COUNT, MAVLINK_MESSAGE_INFO_MISSION_CLEAR_ALL, MAVLINK_MESSAGE_INFO_MISSION_ITEM_REACHED, MAVLINK_MESSAGE_INFO_MISSION_ACK, MAVLINK_MESSAGE_INFO_SET_GPS_GLOBAL_ORIGIN, MAVLINK_MESSAGE_INFO_GPS_GLOBAL_ORIGIN, MAVLINK_MESSAGE_INFO_SET_LOCAL_POSITION_SETPOINT, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_SETPOINT, MAVLINK_MESSAGE_INFO_GLOBAL_POSITION_SETPOINT_INT, MAVLINK_MESSAGE_INFO_SET_GLOBAL_POSITION_SETPOINT_INT, MAVLINK_MESSAGE_INFO_SAFETY_SET_ALLOWED_AREA, MAVLINK_MESSAGE_INFO_SAFETY_ALLOWED_AREA, MAVLINK_MESSAGE_INFO_SET_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_SET_ROLL_PITCH_YAW_SPEED_THRUST, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_SPEED_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_SET_QUAD_MOTORS_SETPOINT, MAVLINK_MESSAGE_INFO_SET_QUAD_SWARM_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_NAV_CONTROLLER_OUTPUT, MAVLINK_MESSAGE_INFO_SET_QUAD_SWARM_LED_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_STATE_CORRECTION, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_REQUEST_DATA_STREAM, MAVLINK_MESSAGE_INFO_DATA_STREAM, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_MANUAL_CONTROL, MAVLINK_MESSAGE_INFO_RC_CHANNELS_OVERRIDE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_VFR_HUD, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_COMMAND_LONG, MAVLINK_MESSAGE_INFO_COMMAND_ACK, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_RATES_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_MANUAL_SETPOINT, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED_SYSTEM_GLOBAL_OFFSET, MAVLINK_MESSAGE_INFO_HIL_STATE, MAVLINK_MESSAGE_INFO_HIL_CONTROLS, MAVLINK_MESSAGE_INFO_HIL_RC_INPUTS_RAW, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_OPTICAL_FLOW, MAVLINK_MESSAGE_INFO_GLOBAL_VISION_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_VISION_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_VISION_SPEED_ESTIMATE, MAVLINK_MESSAGE_INFO_VICON_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_HIGHRES_IMU, MAVLINK_MESSAGE_INFO_OMNIDIRECTIONAL_FLOW, MAVLINK_MESSAGE_INFO_HIL_SENSOR, MAVLINK_MESSAGE_INFO_SIM_STATE, MAVLINK_MESSAGE_INFO_RADIO_STATUS, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_START, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_DIR_LIST, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_RES, MAVLINK_MESSAGE_INFO_HIL_GPS, MAVLINK_MESSAGE_INFO_HIL_OPTICAL_FLOW, MAVLINK_MESSAGE_INFO_HIL_STATE_QUATERNION, MAVLINK_MESSAGE_INFO_SCALED_IMU2, MAVLINK_MESSAGE_INFO_LOG_REQUEST_LIST, MAVLINK_MESSAGE_INFO_LOG_ENTRY, MAVLINK_MESSAGE_INFO_LOG_REQUEST_DATA, MAVLINK_MESSAGE_INFO_LOG_DATA, MAVLINK_MESSAGE_INFO_LOG_ERASE, MAVLINK_MESSAGE_INFO_LOG_REQUEST_END, MAVLINK_MESSAGE_INFO_GPS_INJECT_DATA, MAVLINK_MESSAGE_INFO_GPS2_RAW, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_DATA_TRANSMISSION_HANDSHAKE, MAVLINK_MESSAGE_INFO_ENCAPSULATED_DATA, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_BATTERY_STATUS, MAVLINK_MESSAGE_INFO_SETPOINT_8DOF, MAVLINK_MESSAGE_INFO_SETPOINT_6DOF, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_SET_CAM_SHUTTER, MAVLINK_MESSAGE_INFO_IMAGE_TRIGGERED, MAVLINK_MESSAGE_INFO_IMAGE_TRIGGER_CONTROL, MAVLINK_MESSAGE_INFO_IMAGE_AVAILABLE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_SET_POSITION_CONTROL_OFFSET, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_POSITION_CONTROL_SETPOINT, MAVLINK_MESSAGE_INFO_MARKER, MAVLINK_MESSAGE_INFO_RAW_AUX, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_WATCHDOG_HEARTBEAT, MAVLINK_MESSAGE_INFO_WATCHDOG_PROCESS_INFO, MAVLINK_MESSAGE_INFO_WATCHDOG_PROCESS_STATUS, MAVLINK_MESSAGE_INFO_WATCHDOG_COMMAND, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_PATTERN_DETECTED, MAVLINK_MESSAGE_INFO_POINT_OF_INTEREST, MAVLINK_MESSAGE_INFO_POINT_OF_INTEREST_CONNECTION, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_BRIEF_FEATURE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_ATTITUDE_CONTROL, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_MEMORY_VECT, MAVLINK_MESSAGE_INFO_DEBUG_VECT, MAVLINK_MESSAGE_INFO_NAMED_VALUE_FLOAT, MAVLINK_MESSAGE_INFO_NAMED_VALUE_INT, MAVLINK_MESSAGE_INFO_STATUSTEXT, MAVLINK_MESSAGE_INFO_DEBUG, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}} +#define MAVLINK_MESSAGE_INFO {MAVLINK_MESSAGE_INFO_HEARTBEAT, MAVLINK_MESSAGE_INFO_SYS_STATUS, MAVLINK_MESSAGE_INFO_SYSTEM_TIME, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_PING, MAVLINK_MESSAGE_INFO_CHANGE_OPERATOR_CONTROL, MAVLINK_MESSAGE_INFO_CHANGE_OPERATOR_CONTROL_ACK, MAVLINK_MESSAGE_INFO_AUTH_KEY, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_SET_MODE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_PARAM_REQUEST_READ, MAVLINK_MESSAGE_INFO_PARAM_REQUEST_LIST, MAVLINK_MESSAGE_INFO_PARAM_VALUE, MAVLINK_MESSAGE_INFO_PARAM_SET, MAVLINK_MESSAGE_INFO_GPS_RAW_INT, MAVLINK_MESSAGE_INFO_GPS_STATUS, MAVLINK_MESSAGE_INFO_SCALED_IMU, MAVLINK_MESSAGE_INFO_RAW_IMU, MAVLINK_MESSAGE_INFO_RAW_PRESSURE, MAVLINK_MESSAGE_INFO_SCALED_PRESSURE, MAVLINK_MESSAGE_INFO_ATTITUDE, MAVLINK_MESSAGE_INFO_ATTITUDE_QUATERNION, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED, MAVLINK_MESSAGE_INFO_GLOBAL_POSITION_INT, MAVLINK_MESSAGE_INFO_RC_CHANNELS_SCALED, MAVLINK_MESSAGE_INFO_RC_CHANNELS_RAW, MAVLINK_MESSAGE_INFO_SERVO_OUTPUT_RAW, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_PARTIAL_LIST, MAVLINK_MESSAGE_INFO_MISSION_WRITE_PARTIAL_LIST, MAVLINK_MESSAGE_INFO_MISSION_ITEM, MAVLINK_MESSAGE_INFO_MISSION_REQUEST, MAVLINK_MESSAGE_INFO_MISSION_SET_CURRENT, MAVLINK_MESSAGE_INFO_MISSION_CURRENT, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_LIST, MAVLINK_MESSAGE_INFO_MISSION_COUNT, MAVLINK_MESSAGE_INFO_MISSION_CLEAR_ALL, MAVLINK_MESSAGE_INFO_MISSION_ITEM_REACHED, MAVLINK_MESSAGE_INFO_MISSION_ACK, MAVLINK_MESSAGE_INFO_SET_GPS_GLOBAL_ORIGIN, MAVLINK_MESSAGE_INFO_GPS_GLOBAL_ORIGIN, MAVLINK_MESSAGE_INFO_SET_LOCAL_POSITION_SETPOINT, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_SETPOINT, MAVLINK_MESSAGE_INFO_GLOBAL_POSITION_SETPOINT_INT, MAVLINK_MESSAGE_INFO_SET_GLOBAL_POSITION_SETPOINT_INT, MAVLINK_MESSAGE_INFO_SAFETY_SET_ALLOWED_AREA, MAVLINK_MESSAGE_INFO_SAFETY_ALLOWED_AREA, MAVLINK_MESSAGE_INFO_SET_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_SET_ROLL_PITCH_YAW_SPEED_THRUST, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_SPEED_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_SET_QUAD_MOTORS_SETPOINT, MAVLINK_MESSAGE_INFO_SET_QUAD_SWARM_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_NAV_CONTROLLER_OUTPUT, MAVLINK_MESSAGE_INFO_SET_QUAD_SWARM_LED_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_STATE_CORRECTION, MAVLINK_MESSAGE_INFO_RC_CHANNELS, MAVLINK_MESSAGE_INFO_REQUEST_DATA_STREAM, MAVLINK_MESSAGE_INFO_DATA_STREAM, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_MANUAL_CONTROL, MAVLINK_MESSAGE_INFO_RC_CHANNELS_OVERRIDE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_VFR_HUD, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_COMMAND_LONG, MAVLINK_MESSAGE_INFO_COMMAND_ACK, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_RATES_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_MANUAL_SETPOINT, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED_SYSTEM_GLOBAL_OFFSET, MAVLINK_MESSAGE_INFO_HIL_STATE, MAVLINK_MESSAGE_INFO_HIL_CONTROLS, MAVLINK_MESSAGE_INFO_HIL_RC_INPUTS_RAW, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_OPTICAL_FLOW, MAVLINK_MESSAGE_INFO_GLOBAL_VISION_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_VISION_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_VISION_SPEED_ESTIMATE, MAVLINK_MESSAGE_INFO_VICON_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_HIGHRES_IMU, MAVLINK_MESSAGE_INFO_OMNIDIRECTIONAL_FLOW, MAVLINK_MESSAGE_INFO_HIL_SENSOR, MAVLINK_MESSAGE_INFO_SIM_STATE, MAVLINK_MESSAGE_INFO_RADIO_STATUS, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_START, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_DIR_LIST, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_RES, MAVLINK_MESSAGE_INFO_HIL_GPS, MAVLINK_MESSAGE_INFO_HIL_OPTICAL_FLOW, MAVLINK_MESSAGE_INFO_HIL_STATE_QUATERNION, MAVLINK_MESSAGE_INFO_SCALED_IMU2, MAVLINK_MESSAGE_INFO_LOG_REQUEST_LIST, MAVLINK_MESSAGE_INFO_LOG_ENTRY, MAVLINK_MESSAGE_INFO_LOG_REQUEST_DATA, MAVLINK_MESSAGE_INFO_LOG_DATA, MAVLINK_MESSAGE_INFO_LOG_ERASE, MAVLINK_MESSAGE_INFO_LOG_REQUEST_END, MAVLINK_MESSAGE_INFO_GPS_INJECT_DATA, MAVLINK_MESSAGE_INFO_GPS2_RAW, MAVLINK_MESSAGE_INFO_POWER_STATUS, MAVLINK_MESSAGE_INFO_SERIAL_CONTROL, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_DATA_TRANSMISSION_HANDSHAKE, MAVLINK_MESSAGE_INFO_ENCAPSULATED_DATA, MAVLINK_MESSAGE_INFO_DISTANCE_SENSOR, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_BATTERY_STATUS, MAVLINK_MESSAGE_INFO_SETPOINT_8DOF, MAVLINK_MESSAGE_INFO_SETPOINT_6DOF, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_SET_CAM_SHUTTER, MAVLINK_MESSAGE_INFO_IMAGE_TRIGGERED, MAVLINK_MESSAGE_INFO_IMAGE_TRIGGER_CONTROL, MAVLINK_MESSAGE_INFO_IMAGE_AVAILABLE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_SET_POSITION_CONTROL_OFFSET, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_POSITION_CONTROL_SETPOINT, MAVLINK_MESSAGE_INFO_MARKER, MAVLINK_MESSAGE_INFO_RAW_AUX, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_WATCHDOG_HEARTBEAT, MAVLINK_MESSAGE_INFO_WATCHDOG_PROCESS_INFO, MAVLINK_MESSAGE_INFO_WATCHDOG_PROCESS_STATUS, MAVLINK_MESSAGE_INFO_WATCHDOG_COMMAND, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_PATTERN_DETECTED, MAVLINK_MESSAGE_INFO_POINT_OF_INTEREST, MAVLINK_MESSAGE_INFO_POINT_OF_INTEREST_CONNECTION, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_BRIEF_FEATURE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_ATTITUDE_CONTROL, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_MEMORY_VECT, MAVLINK_MESSAGE_INFO_DEBUG_VECT, MAVLINK_MESSAGE_INFO_NAMED_VALUE_FLOAT, MAVLINK_MESSAGE_INFO_NAMED_VALUE_INT, MAVLINK_MESSAGE_INFO_STATUSTEXT, MAVLINK_MESSAGE_INFO_DEBUG, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}} #endif #include "../protocol.h" @@ -56,6 +56,7 @@ enum MAV_CMD MAV_CMD_NAV_TAKEOFF=22, /* Takeoff from ground / hand |Minimum pitch (if airspeed sensor present), desired pitch without sensor| Empty| Empty| Yaw angle (if magnetometer present), ignored without magnetometer| Latitude| Longitude| Altitude| */ MAV_CMD_NAV_ROI=80, /* Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of intereset mode. (see MAV_ROI enum)| MISSION index/ target ID. (see MAV_ROI enum)| ROI index (allows a vehicle to manage multiple ROI's)| Empty| x the location of the fixed ROI (see MAV_FRAME)| y| z| */ MAV_CMD_NAV_PATHPLANNING=81, /* Control autonomous path planning on the MAV. |0: Disable local obstacle avoidance / local path planning (without resetting map), 1: Enable local path planning, 2: Enable and reset local path planning| 0: Disable full path planning (without resetting map), 1: Enable, 2: Enable and reset map/occupancy grid, 3: Enable and reset planned route, but not occupancy grid| Empty| Yaw angle at goal, in compass degrees, [0..360]| Latitude/X of goal| Longitude/Y of goal| Altitude/Z of goal| */ + MAV_CMD_NAV_SPLINE_WAYPOINT=82, /* Navigate to MISSION using a spline path. |Hold time in decimal seconds. (ignored by fixed wing, time to stay at MISSION for rotary wing)| Empty| Empty| Empty| Latitude/X of goal| Longitude/Y of goal| Altitude/Z of goal| */ MAV_CMD_NAV_LAST=95, /* NOP - This command is only used to mark the upper limit of the NAV/ACTION commands in the enumeration |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_CONDITION_DELAY=112, /* Delay mission state machine. |Delay in seconds (decimal)| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_CONDITION_CHANGE_ALT=113, /* Ascend/descend at rate. Delay mission state machine until desired altitude reached. |Descent / Ascend rate (m/s)| Empty| Empty| Empty| Empty| Empty| Finish Altitude| */ @@ -73,8 +74,16 @@ enum MAV_CMD MAV_CMD_DO_REPEAT_SERVO=184, /* Cycle a between its nominal setting and a desired PWM for a desired number of cycles with a desired period. |Servo number| PWM (microseconds, 1000 to 2000 typical)| Cycle count| Cycle time (seconds)| Empty| Empty| Empty| */ MAV_CMD_DO_CONTROL_VIDEO=200, /* Control onboard camera system. |Camera ID (-1 for all)| Transmission: 0: disabled, 1: enabled compressed, 2: enabled raw| Transmission mode: 0: video stream, >0: single images every n seconds (decimal)| Recording: 0: disabled, 1: enabled compressed, 2: enabled raw| Empty| Empty| Empty| */ MAV_CMD_DO_SET_ROI=201, /* Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of intereset mode. (see MAV_ROI enum)| MISSION index/ target ID. (see MAV_ROI enum)| ROI index (allows a vehicle to manage multiple ROI's)| Empty| x the location of the fixed ROI (see MAV_FRAME)| y| z| */ + MAV_CMD_DO_DIGICAM_CONFIGURE=202, /* Mission command to configure an on-board camera controller system. |Modes: P, TV, AV, M, Etc| Shutter speed: Divisor number for one second| Aperture: F stop number| ISO number e.g. 80, 100, 200, Etc| Exposure type enumerator| Command Identity| Main engine cut-off time before camera trigger in seconds/10 (0 means no cut-off)| */ + MAV_CMD_DO_DIGICAM_CONTROL=203, /* Mission command to control an on-board camera controller system. |Session control e.g. show/hide lens| Zoom's absolute position| Zooming step value to offset zoom from the current position| Focus Locking, Unlocking or Re-locking| Shooting Command| Command Identity| Empty| */ + MAV_CMD_DO_MOUNT_CONFIGURE=204, /* Mission command to configure a camera or antenna mount |Mount operation mode (see MAV_MOUNT_MODE enum)| stabilize roll? (1 = yes, 0 = no)| stabilize pitch? (1 = yes, 0 = no)| stabilize yaw? (1 = yes, 0 = no)| Empty| Empty| Empty| */ + MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch or lat in degrees, depending on mount mode.| roll or lon in degrees depending on mount mode| yaw or alt (in meters) depending on mount mode| reserved| reserved| reserved| MAV_MOUNT_MODE enum value| */ + MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set CAM_TRIGG_DIST for this flight |Camera trigger distance (meters)| Empty| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_DO_FENCE_ENABLE=207, /* Mission command to enable the geofence |enable? (0=disable, 1=enable)| Empty| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_DO_PARACHUTE=208, /* Mission command to trigger a parachute |action (0=disable, 1=enable, 2=release, for some systems see PARACHUTE_ACTION enum, not in general message set.)| Empty| Empty| Empty| Empty| Empty| Empty| */ + MAV_CMD_DO_MOUNT_CONTROL_QUAT=220, /* Mission command to control a camera or antenna mount, using a quaternion as reference. |q1 - quaternion param #1| q2 - quaternion param #2| q3 - quaternion param #3| q4 - quaternion param #4| Empty| Empty| Empty| */ MAV_CMD_DO_LAST=240, /* NOP - This command is only used to mark the upper limit of the DO commands in the enumeration |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */ - MAV_CMD_PREFLIGHT_CALIBRATION=241, /* Trigger calibration. This command will be only accepted if in pre-flight mode. |Gyro calibration: 0: no, 1: yes| Magnetometer calibration: 0: no, 1: yes| Ground pressure: 0: no, 1: yes| Radio calibration: 0: no, 1: yes| Accelerometer calibration: 0: no, 1: yes| Empty| Empty| */ + MAV_CMD_PREFLIGHT_CALIBRATION=241, /* Trigger calibration. This command will be only accepted if in pre-flight mode. |Gyro calibration: 0: no, 1: yes| Magnetometer calibration: 0: no, 1: yes| Ground pressure: 0: no, 1: yes| Radio calibration: 0: no, 1: yes| Accelerometer calibration: 0: no, 1: yes| Compass/Motor interference calibration: 0: no, 1: yes| Empty| */ MAV_CMD_PREFLIGHT_SET_SENSOR_OFFSETS=242, /* Set sensor offsets. This command will be only accepted if in pre-flight mode. |Sensor to adjust the offsets for: 0: gyros, 1: accelerometer, 2: magnetometer, 3: barometer, 4: optical flow| X axis offset (or generic dimension 1), in the sensor's raw units| Y axis offset (or generic dimension 2), in the sensor's raw units| Z axis offset (or generic dimension 3), in the sensor's raw units| Generic dimension 4, in the sensor's raw units| Generic dimension 5, in the sensor's raw units| Generic dimension 6, in the sensor's raw units| */ MAV_CMD_PREFLIGHT_STORAGE=245, /* Request storage of different parameter values and logs. This command will be only accepted if in pre-flight mode. |Parameter storage: 0: READ FROM FLASH/EEPROM, 1: WRITE CURRENT TO FLASH/EEPROM| Mission storage: 0: READ FROM FLASH/EEPROM, 1: WRITE CURRENT TO FLASH/EEPROM| Reserved| Reserved| Empty| Empty| Empty| */ MAV_CMD_PREFLIGHT_REBOOT_SHUTDOWN=246, /* Request the reboot or shutdown of system components. |0: Do nothing for autopilot, 1: Reboot autopilot, 2: Shutdown autopilot.| 0: Do nothing for onboard computer, 1: Reboot onboard computer, 2: Shutdown onboard computer.| Reserved| Reserved| Empty| Empty| Empty| */ diff --git a/mavlink/include/mavlink/v1.0/pixhawk/version.h b/mavlink/include/mavlink/v1.0/pixhawk/version.h index aa79f6ffb..6610a894c 100644 --- a/mavlink/include/mavlink/v1.0/pixhawk/version.h +++ b/mavlink/include/mavlink/v1.0/pixhawk/version.h @@ -5,7 +5,7 @@ #ifndef MAVLINK_VERSION_H #define MAVLINK_VERSION_H -#define MAVLINK_BUILD_DATE "Tue Feb 4 15:28:16 2014" +#define MAVLINK_BUILD_DATE "Sun Apr 13 09:38:46 2014" #define MAVLINK_WIRE_PROTOCOL_VERSION "1.0" #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255 diff --git a/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_cmd_airspeed_ack.h b/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_cmd_airspeed_ack.h index 73e9d75db..a87ce87d3 100644 --- a/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_cmd_airspeed_ack.h +++ b/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_cmd_airspeed_ack.h @@ -173,6 +173,40 @@ static inline void mavlink_msg_cmd_airspeed_ack_send(mavlink_channel_t chan, flo #endif } +#if MAVLINK_MSG_ID_CMD_AIRSPEED_ACK_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_cmd_airspeed_ack_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, float spCmd, uint8_t ack) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, spCmd); + _mav_put_uint8_t(buf, 4, ack); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_CMD_AIRSPEED_ACK, buf, MAVLINK_MSG_ID_CMD_AIRSPEED_ACK_LEN, MAVLINK_MSG_ID_CMD_AIRSPEED_ACK_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_CMD_AIRSPEED_ACK, buf, MAVLINK_MSG_ID_CMD_AIRSPEED_ACK_LEN); +#endif +#else + mavlink_cmd_airspeed_ack_t *packet = (mavlink_cmd_airspeed_ack_t *)msgbuf; + packet->spCmd = spCmd; + packet->ack = ack; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_CMD_AIRSPEED_ACK, (const char *)packet, MAVLINK_MSG_ID_CMD_AIRSPEED_ACK_LEN, MAVLINK_MSG_ID_CMD_AIRSPEED_ACK_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_CMD_AIRSPEED_ACK, (const char *)packet, MAVLINK_MSG_ID_CMD_AIRSPEED_ACK_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE CMD_AIRSPEED_ACK UNPACKING diff --git a/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_cmd_airspeed_chng.h b/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_cmd_airspeed_chng.h index b6b567f99..71d61e1e0 100644 --- a/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_cmd_airspeed_chng.h +++ b/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_cmd_airspeed_chng.h @@ -173,6 +173,40 @@ static inline void mavlink_msg_cmd_airspeed_chng_send(mavlink_channel_t chan, ui #endif } +#if MAVLINK_MSG_ID_CMD_AIRSPEED_CHNG_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_cmd_airspeed_chng_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target, float spCmd) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, spCmd); + _mav_put_uint8_t(buf, 4, target); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_CMD_AIRSPEED_CHNG, buf, MAVLINK_MSG_ID_CMD_AIRSPEED_CHNG_LEN, MAVLINK_MSG_ID_CMD_AIRSPEED_CHNG_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_CMD_AIRSPEED_CHNG, buf, MAVLINK_MSG_ID_CMD_AIRSPEED_CHNG_LEN); +#endif +#else + mavlink_cmd_airspeed_chng_t *packet = (mavlink_cmd_airspeed_chng_t *)msgbuf; + packet->spCmd = spCmd; + packet->target = target; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_CMD_AIRSPEED_CHNG, (const char *)packet, MAVLINK_MSG_ID_CMD_AIRSPEED_CHNG_LEN, MAVLINK_MSG_ID_CMD_AIRSPEED_CHNG_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_CMD_AIRSPEED_CHNG, (const char *)packet, MAVLINK_MSG_ID_CMD_AIRSPEED_CHNG_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE CMD_AIRSPEED_CHNG UNPACKING diff --git a/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_filt_rot_vel.h b/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_filt_rot_vel.h index 642f7aab9..40a3db25a 100644 --- a/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_filt_rot_vel.h +++ b/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_filt_rot_vel.h @@ -154,6 +154,38 @@ static inline void mavlink_msg_filt_rot_vel_send(mavlink_channel_t chan, const f #endif } +#if MAVLINK_MSG_ID_FILT_ROT_VEL_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_filt_rot_vel_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, const float *rotVel) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + + _mav_put_float_array(buf, 0, rotVel, 3); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FILT_ROT_VEL, buf, MAVLINK_MSG_ID_FILT_ROT_VEL_LEN, MAVLINK_MSG_ID_FILT_ROT_VEL_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FILT_ROT_VEL, buf, MAVLINK_MSG_ID_FILT_ROT_VEL_LEN); +#endif +#else + mavlink_filt_rot_vel_t *packet = (mavlink_filt_rot_vel_t *)msgbuf; + + mav_array_memcpy(packet->rotVel, rotVel, sizeof(float)*3); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FILT_ROT_VEL, (const char *)packet, MAVLINK_MSG_ID_FILT_ROT_VEL_LEN, MAVLINK_MSG_ID_FILT_ROT_VEL_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_FILT_ROT_VEL, (const char *)packet, MAVLINK_MSG_ID_FILT_ROT_VEL_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE FILT_ROT_VEL UNPACKING diff --git a/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_llc_out.h b/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_llc_out.h index 0f8369881..bceed1013 100644 --- a/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_llc_out.h +++ b/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_llc_out.h @@ -174,6 +174,40 @@ static inline void mavlink_msg_llc_out_send(mavlink_channel_t chan, const int16_ #endif } +#if MAVLINK_MSG_ID_LLC_OUT_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_llc_out_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, const int16_t *servoOut, const int16_t *MotorOut) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + + _mav_put_int16_t_array(buf, 0, servoOut, 4); + _mav_put_int16_t_array(buf, 8, MotorOut, 2); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LLC_OUT, buf, MAVLINK_MSG_ID_LLC_OUT_LEN, MAVLINK_MSG_ID_LLC_OUT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LLC_OUT, buf, MAVLINK_MSG_ID_LLC_OUT_LEN); +#endif +#else + mavlink_llc_out_t *packet = (mavlink_llc_out_t *)msgbuf; + + mav_array_memcpy(packet->servoOut, servoOut, sizeof(int16_t)*4); + mav_array_memcpy(packet->MotorOut, MotorOut, sizeof(int16_t)*2); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LLC_OUT, (const char *)packet, MAVLINK_MSG_ID_LLC_OUT_LEN, MAVLINK_MSG_ID_LLC_OUT_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LLC_OUT, (const char *)packet, MAVLINK_MSG_ID_LLC_OUT_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE LLC_OUT UNPACKING diff --git a/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_air_temp.h b/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_air_temp.h index 5d9382326..f5a43e4fa 100644 --- a/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_air_temp.h +++ b/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_air_temp.h @@ -154,6 +154,38 @@ static inline void mavlink_msg_obs_air_temp_send(mavlink_channel_t chan, float a #endif } +#if MAVLINK_MSG_ID_OBS_AIR_TEMP_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_obs_air_temp_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, float airT) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, airT); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_AIR_TEMP, buf, MAVLINK_MSG_ID_OBS_AIR_TEMP_LEN, MAVLINK_MSG_ID_OBS_AIR_TEMP_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_AIR_TEMP, buf, MAVLINK_MSG_ID_OBS_AIR_TEMP_LEN); +#endif +#else + mavlink_obs_air_temp_t *packet = (mavlink_obs_air_temp_t *)msgbuf; + packet->airT = airT; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_AIR_TEMP, (const char *)packet, MAVLINK_MSG_ID_OBS_AIR_TEMP_LEN, MAVLINK_MSG_ID_OBS_AIR_TEMP_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_AIR_TEMP, (const char *)packet, MAVLINK_MSG_ID_OBS_AIR_TEMP_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE OBS_AIR_TEMP UNPACKING diff --git a/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_air_velocity.h b/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_air_velocity.h index 35d813ca1..67d5ab2a2 100644 --- a/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_air_velocity.h +++ b/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_air_velocity.h @@ -192,6 +192,42 @@ static inline void mavlink_msg_obs_air_velocity_send(mavlink_channel_t chan, flo #endif } +#if MAVLINK_MSG_ID_OBS_AIR_VELOCITY_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_obs_air_velocity_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, float magnitude, float aoa, float slip) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, magnitude); + _mav_put_float(buf, 4, aoa); + _mav_put_float(buf, 8, slip); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_AIR_VELOCITY, buf, MAVLINK_MSG_ID_OBS_AIR_VELOCITY_LEN, MAVLINK_MSG_ID_OBS_AIR_VELOCITY_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_AIR_VELOCITY, buf, MAVLINK_MSG_ID_OBS_AIR_VELOCITY_LEN); +#endif +#else + mavlink_obs_air_velocity_t *packet = (mavlink_obs_air_velocity_t *)msgbuf; + packet->magnitude = magnitude; + packet->aoa = aoa; + packet->slip = slip; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_AIR_VELOCITY, (const char *)packet, MAVLINK_MSG_ID_OBS_AIR_VELOCITY_LEN, MAVLINK_MSG_ID_OBS_AIR_VELOCITY_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_AIR_VELOCITY, (const char *)packet, MAVLINK_MSG_ID_OBS_AIR_VELOCITY_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE OBS_AIR_VELOCITY UNPACKING diff --git a/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_attitude.h b/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_attitude.h index 9c80cd66e..e1178e25f 100644 --- a/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_attitude.h +++ b/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_attitude.h @@ -154,6 +154,38 @@ static inline void mavlink_msg_obs_attitude_send(mavlink_channel_t chan, const d #endif } +#if MAVLINK_MSG_ID_OBS_ATTITUDE_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_obs_attitude_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, const double *quat) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + + _mav_put_double_array(buf, 0, quat, 4); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_ATTITUDE, buf, MAVLINK_MSG_ID_OBS_ATTITUDE_LEN, MAVLINK_MSG_ID_OBS_ATTITUDE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_ATTITUDE, buf, MAVLINK_MSG_ID_OBS_ATTITUDE_LEN); +#endif +#else + mavlink_obs_attitude_t *packet = (mavlink_obs_attitude_t *)msgbuf; + + mav_array_memcpy(packet->quat, quat, sizeof(double)*4); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_ATTITUDE, (const char *)packet, MAVLINK_MSG_ID_OBS_ATTITUDE_LEN, MAVLINK_MSG_ID_OBS_ATTITUDE_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_ATTITUDE, (const char *)packet, MAVLINK_MSG_ID_OBS_ATTITUDE_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE OBS_ATTITUDE UNPACKING diff --git a/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_bias.h b/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_bias.h index 24dd43b57..b164687ff 100644 --- a/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_bias.h +++ b/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_bias.h @@ -174,6 +174,40 @@ static inline void mavlink_msg_obs_bias_send(mavlink_channel_t chan, const float #endif } +#if MAVLINK_MSG_ID_OBS_BIAS_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_obs_bias_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, const float *accBias, const float *gyroBias) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + + _mav_put_float_array(buf, 0, accBias, 3); + _mav_put_float_array(buf, 12, gyroBias, 3); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_BIAS, buf, MAVLINK_MSG_ID_OBS_BIAS_LEN, MAVLINK_MSG_ID_OBS_BIAS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_BIAS, buf, MAVLINK_MSG_ID_OBS_BIAS_LEN); +#endif +#else + mavlink_obs_bias_t *packet = (mavlink_obs_bias_t *)msgbuf; + + mav_array_memcpy(packet->accBias, accBias, sizeof(float)*3); + mav_array_memcpy(packet->gyroBias, gyroBias, sizeof(float)*3); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_BIAS, (const char *)packet, MAVLINK_MSG_ID_OBS_BIAS_LEN, MAVLINK_MSG_ID_OBS_BIAS_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_BIAS, (const char *)packet, MAVLINK_MSG_ID_OBS_BIAS_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE OBS_BIAS UNPACKING diff --git a/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_position.h b/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_position.h index cfc2fe7e1..f0ecef0e7 100644 --- a/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_position.h +++ b/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_position.h @@ -192,6 +192,42 @@ static inline void mavlink_msg_obs_position_send(mavlink_channel_t chan, int32_t #endif } +#if MAVLINK_MSG_ID_OBS_POSITION_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_obs_position_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, int32_t lon, int32_t lat, int32_t alt) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_int32_t(buf, 0, lon); + _mav_put_int32_t(buf, 4, lat); + _mav_put_int32_t(buf, 8, alt); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_POSITION, buf, MAVLINK_MSG_ID_OBS_POSITION_LEN, MAVLINK_MSG_ID_OBS_POSITION_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_POSITION, buf, MAVLINK_MSG_ID_OBS_POSITION_LEN); +#endif +#else + mavlink_obs_position_t *packet = (mavlink_obs_position_t *)msgbuf; + packet->lon = lon; + packet->lat = lat; + packet->alt = alt; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_POSITION, (const char *)packet, MAVLINK_MSG_ID_OBS_POSITION_LEN, MAVLINK_MSG_ID_OBS_POSITION_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_POSITION, (const char *)packet, MAVLINK_MSG_ID_OBS_POSITION_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE OBS_POSITION UNPACKING diff --git a/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_qff.h b/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_qff.h index 24e272bf7..31617c883 100644 --- a/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_qff.h +++ b/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_qff.h @@ -154,6 +154,38 @@ static inline void mavlink_msg_obs_qff_send(mavlink_channel_t chan, float qff) #endif } +#if MAVLINK_MSG_ID_OBS_QFF_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_obs_qff_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, float qff) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, qff); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_QFF, buf, MAVLINK_MSG_ID_OBS_QFF_LEN, MAVLINK_MSG_ID_OBS_QFF_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_QFF, buf, MAVLINK_MSG_ID_OBS_QFF_LEN); +#endif +#else + mavlink_obs_qff_t *packet = (mavlink_obs_qff_t *)msgbuf; + packet->qff = qff; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_QFF, (const char *)packet, MAVLINK_MSG_ID_OBS_QFF_LEN, MAVLINK_MSG_ID_OBS_QFF_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_QFF, (const char *)packet, MAVLINK_MSG_ID_OBS_QFF_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE OBS_QFF UNPACKING diff --git a/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_velocity.h b/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_velocity.h index 6e3776632..ec815d692 100644 --- a/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_velocity.h +++ b/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_velocity.h @@ -154,6 +154,38 @@ static inline void mavlink_msg_obs_velocity_send(mavlink_channel_t chan, const f #endif } +#if MAVLINK_MSG_ID_OBS_VELOCITY_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_obs_velocity_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, const float *vel) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + + _mav_put_float_array(buf, 0, vel, 3); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_VELOCITY, buf, MAVLINK_MSG_ID_OBS_VELOCITY_LEN, MAVLINK_MSG_ID_OBS_VELOCITY_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_VELOCITY, buf, MAVLINK_MSG_ID_OBS_VELOCITY_LEN); +#endif +#else + mavlink_obs_velocity_t *packet = (mavlink_obs_velocity_t *)msgbuf; + + mav_array_memcpy(packet->vel, vel, sizeof(float)*3); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_VELOCITY, (const char *)packet, MAVLINK_MSG_ID_OBS_VELOCITY_LEN, MAVLINK_MSG_ID_OBS_VELOCITY_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_VELOCITY, (const char *)packet, MAVLINK_MSG_ID_OBS_VELOCITY_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE OBS_VELOCITY UNPACKING diff --git a/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_wind.h b/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_wind.h index 55f7cb2ae..c40391d44 100644 --- a/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_wind.h +++ b/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_obs_wind.h @@ -154,6 +154,38 @@ static inline void mavlink_msg_obs_wind_send(mavlink_channel_t chan, const float #endif } +#if MAVLINK_MSG_ID_OBS_WIND_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_obs_wind_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, const float *wind) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + + _mav_put_float_array(buf, 0, wind, 3); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_WIND, buf, MAVLINK_MSG_ID_OBS_WIND_LEN, MAVLINK_MSG_ID_OBS_WIND_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_WIND, buf, MAVLINK_MSG_ID_OBS_WIND_LEN); +#endif +#else + mavlink_obs_wind_t *packet = (mavlink_obs_wind_t *)msgbuf; + + mav_array_memcpy(packet->wind, wind, sizeof(float)*3); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_WIND, (const char *)packet, MAVLINK_MSG_ID_OBS_WIND_LEN, MAVLINK_MSG_ID_OBS_WIND_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_OBS_WIND, (const char *)packet, MAVLINK_MSG_ID_OBS_WIND_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE OBS_WIND UNPACKING diff --git a/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_pm_elec.h b/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_pm_elec.h index e0963ece7..70524f464 100644 --- a/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_pm_elec.h +++ b/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_pm_elec.h @@ -186,6 +186,40 @@ static inline void mavlink_msg_pm_elec_send(mavlink_channel_t chan, float PwCons #endif } +#if MAVLINK_MSG_ID_PM_ELEC_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_pm_elec_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, float PwCons, float BatStat, const float *PwGen) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_float(buf, 0, PwCons); + _mav_put_float(buf, 4, BatStat); + _mav_put_float_array(buf, 8, PwGen, 3); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PM_ELEC, buf, MAVLINK_MSG_ID_PM_ELEC_LEN, MAVLINK_MSG_ID_PM_ELEC_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PM_ELEC, buf, MAVLINK_MSG_ID_PM_ELEC_LEN); +#endif +#else + mavlink_pm_elec_t *packet = (mavlink_pm_elec_t *)msgbuf; + packet->PwCons = PwCons; + packet->BatStat = BatStat; + mav_array_memcpy(packet->PwGen, PwGen, sizeof(float)*3); +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PM_ELEC, (const char *)packet, MAVLINK_MSG_ID_PM_ELEC_LEN, MAVLINK_MSG_ID_PM_ELEC_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_PM_ELEC, (const char *)packet, MAVLINK_MSG_ID_PM_ELEC_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE PM_ELEC UNPACKING diff --git a/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_sys_stat.h b/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_sys_stat.h index 94f3e58bb..72f8a8193 100644 --- a/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_sys_stat.h +++ b/mavlink/include/mavlink/v1.0/sensesoar/mavlink_msg_sys_stat.h @@ -211,6 +211,44 @@ static inline void mavlink_msg_sys_stat_send(mavlink_channel_t chan, uint8_t gps #endif } +#if MAVLINK_MSG_ID_SYS_Stat_LEN <= MAVLINK_MAX_PAYLOAD_LEN +/* + This varient of _send() can be used to save stack space by re-using + memory from the receive buffer. The caller provides a + mavlink_message_t which is the size of a full mavlink message. This + is usually the receive buffer for the channel, and allows a reply to an + incoming message with minimum stack space usage. + */ +static inline void mavlink_msg_sys_stat_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t gps, uint8_t act, uint8_t mod, uint8_t commRssi) +{ +#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS + char *buf = (char *)msgbuf; + _mav_put_uint8_t(buf, 0, gps); + _mav_put_uint8_t(buf, 1, act); + _mav_put_uint8_t(buf, 2, mod); + _mav_put_uint8_t(buf, 3, commRssi); + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SYS_Stat, buf, MAVLINK_MSG_ID_SYS_Stat_LEN, MAVLINK_MSG_ID_SYS_Stat_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SYS_Stat, buf, MAVLINK_MSG_ID_SYS_Stat_LEN); +#endif +#else + mavlink_sys_stat_t *packet = (mavlink_sys_stat_t *)msgbuf; + packet->gps = gps; + packet->act = act; + packet->mod = mod; + packet->commRssi = commRssi; + +#if MAVLINK_CRC_EXTRA + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SYS_Stat, (const char *)packet, MAVLINK_MSG_ID_SYS_Stat_LEN, MAVLINK_MSG_ID_SYS_Stat_CRC); +#else + _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SYS_Stat, (const char *)packet, MAVLINK_MSG_ID_SYS_Stat_LEN); +#endif +#endif +} +#endif + #endif // MESSAGE SYS_Stat UNPACKING diff --git a/mavlink/include/mavlink/v1.0/sensesoar/sensesoar.h b/mavlink/include/mavlink/v1.0/sensesoar/sensesoar.h index 26666b0cc..2eab86354 100644 --- a/mavlink/include/mavlink/v1.0/sensesoar/sensesoar.h +++ b/mavlink/include/mavlink/v1.0/sensesoar/sensesoar.h @@ -12,15 +12,15 @@ extern "C" { // MESSAGE LENGTHS AND CRCS #ifndef MAVLINK_MESSAGE_LENGTHS -#define MAVLINK_MESSAGE_LENGTHS {9, 31, 12, 0, 14, 28, 3, 32, 0, 0, 0, 6, 0, 0, 0, 0, 0, 0, 0, 0, 20, 2, 25, 23, 30, 101, 22, 26, 16, 14, 28, 32, 28, 28, 22, 22, 21, 6, 6, 37, 4, 4, 2, 2, 4, 2, 2, 3, 13, 12, 19, 17, 15, 15, 27, 25, 18, 18, 20, 20, 9, 34, 26, 46, 36, 0, 6, 4, 0, 11, 18, 0, 0, 0, 20, 0, 33, 3, 0, 0, 20, 22, 0, 0, 0, 0, 0, 0, 0, 28, 56, 42, 33, 0, 0, 0, 0, 0, 0, 0, 26, 32, 32, 20, 32, 62, 54, 64, 84, 9, 254, 249, 9, 36, 26, 64, 22, 6, 14, 12, 97, 2, 2, 113, 35, 0, 0, 0, 0, 0, 13, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 24, 33, 25, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 12, 0, 12, 0, 32, 0, 12, 0, 12, 0, 24, 0, 4, 4, 12, 0, 12, 0, 20, 0, 4, 0, 5, 0, 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 36, 30, 18, 18, 51, 9, 0} +#define MAVLINK_MESSAGE_LENGTHS {9, 31, 12, 0, 14, 28, 3, 32, 0, 0, 0, 6, 0, 0, 0, 0, 0, 0, 0, 0, 20, 2, 25, 23, 30, 101, 22, 26, 16, 14, 28, 32, 28, 28, 22, 22, 21, 6, 6, 37, 4, 4, 2, 2, 4, 2, 2, 3, 13, 12, 19, 17, 15, 15, 27, 25, 18, 18, 20, 20, 9, 34, 26, 46, 36, 42, 6, 4, 0, 11, 18, 0, 0, 0, 20, 0, 33, 3, 0, 0, 20, 22, 0, 0, 0, 0, 0, 0, 0, 28, 56, 42, 33, 0, 0, 0, 0, 0, 0, 0, 26, 32, 32, 20, 32, 62, 54, 64, 84, 9, 254, 249, 9, 36, 26, 64, 22, 6, 14, 12, 97, 2, 2, 113, 35, 6, 79, 0, 0, 0, 13, 255, 14, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 24, 33, 25, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 12, 0, 12, 0, 32, 0, 12, 0, 12, 0, 24, 0, 4, 4, 12, 0, 12, 0, 20, 0, 4, 0, 5, 0, 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 36, 30, 18, 18, 51, 9, 0} #endif #ifndef MAVLINK_MESSAGE_CRCS -#define MAVLINK_MESSAGE_CRCS {50, 124, 137, 0, 237, 217, 104, 119, 0, 0, 0, 89, 0, 0, 0, 0, 0, 0, 0, 0, 214, 159, 220, 168, 24, 23, 170, 144, 67, 115, 39, 246, 185, 104, 237, 244, 222, 212, 9, 254, 230, 28, 28, 132, 221, 232, 11, 153, 41, 39, 214, 223, 141, 33, 15, 3, 100, 24, 239, 238, 30, 240, 183, 130, 130, 0, 148, 21, 0, 243, 124, 0, 0, 0, 20, 0, 152, 143, 0, 0, 127, 106, 0, 0, 0, 0, 0, 0, 0, 231, 183, 63, 54, 0, 0, 0, 0, 0, 0, 0, 175, 102, 158, 208, 56, 93, 211, 108, 32, 185, 235, 93, 124, 124, 119, 4, 76, 128, 56, 116, 134, 237, 203, 250, 87, 0, 0, 0, 0, 0, 29, 223, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 177, 241, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 15, 0, 108, 0, 146, 0, 16, 0, 32, 0, 159, 0, 24, 248, 79, 0, 5, 0, 170, 0, 157, 0, 209, 0, 243, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 204, 49, 170, 44, 83, 46, 0} +#define MAVLINK_MESSAGE_CRCS {50, 124, 137, 0, 237, 217, 104, 119, 0, 0, 0, 89, 0, 0, 0, 0, 0, 0, 0, 0, 214, 159, 220, 168, 24, 23, 170, 144, 67, 115, 39, 246, 185, 104, 237, 244, 222, 212, 9, 254, 230, 28, 28, 132, 221, 232, 11, 153, 41, 39, 214, 223, 141, 33, 15, 3, 100, 24, 239, 238, 30, 240, 183, 130, 130, 118, 148, 21, 0, 243, 124, 0, 0, 0, 20, 0, 152, 143, 0, 0, 127, 106, 0, 0, 0, 0, 0, 0, 0, 231, 183, 63, 54, 0, 0, 0, 0, 0, 0, 0, 175, 102, 158, 208, 56, 93, 211, 108, 32, 185, 235, 93, 124, 124, 119, 4, 76, 128, 56, 116, 134, 237, 203, 250, 87, 203, 220, 0, 0, 0, 29, 223, 85, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 177, 241, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 15, 0, 108, 0, 146, 0, 16, 0, 32, 0, 159, 0, 24, 248, 79, 0, 5, 0, 170, 0, 157, 0, 209, 0, 243, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 204, 49, 170, 44, 83, 46, 0} #endif #ifndef MAVLINK_MESSAGE_INFO -#define MAVLINK_MESSAGE_INFO {MAVLINK_MESSAGE_INFO_HEARTBEAT, MAVLINK_MESSAGE_INFO_SYS_STATUS, MAVLINK_MESSAGE_INFO_SYSTEM_TIME, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_PING, MAVLINK_MESSAGE_INFO_CHANGE_OPERATOR_CONTROL, MAVLINK_MESSAGE_INFO_CHANGE_OPERATOR_CONTROL_ACK, MAVLINK_MESSAGE_INFO_AUTH_KEY, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_SET_MODE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_PARAM_REQUEST_READ, MAVLINK_MESSAGE_INFO_PARAM_REQUEST_LIST, MAVLINK_MESSAGE_INFO_PARAM_VALUE, MAVLINK_MESSAGE_INFO_PARAM_SET, MAVLINK_MESSAGE_INFO_GPS_RAW_INT, MAVLINK_MESSAGE_INFO_GPS_STATUS, MAVLINK_MESSAGE_INFO_SCALED_IMU, MAVLINK_MESSAGE_INFO_RAW_IMU, MAVLINK_MESSAGE_INFO_RAW_PRESSURE, MAVLINK_MESSAGE_INFO_SCALED_PRESSURE, MAVLINK_MESSAGE_INFO_ATTITUDE, MAVLINK_MESSAGE_INFO_ATTITUDE_QUATERNION, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED, MAVLINK_MESSAGE_INFO_GLOBAL_POSITION_INT, MAVLINK_MESSAGE_INFO_RC_CHANNELS_SCALED, MAVLINK_MESSAGE_INFO_RC_CHANNELS_RAW, MAVLINK_MESSAGE_INFO_SERVO_OUTPUT_RAW, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_PARTIAL_LIST, MAVLINK_MESSAGE_INFO_MISSION_WRITE_PARTIAL_LIST, MAVLINK_MESSAGE_INFO_MISSION_ITEM, MAVLINK_MESSAGE_INFO_MISSION_REQUEST, MAVLINK_MESSAGE_INFO_MISSION_SET_CURRENT, MAVLINK_MESSAGE_INFO_MISSION_CURRENT, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_LIST, MAVLINK_MESSAGE_INFO_MISSION_COUNT, MAVLINK_MESSAGE_INFO_MISSION_CLEAR_ALL, MAVLINK_MESSAGE_INFO_MISSION_ITEM_REACHED, MAVLINK_MESSAGE_INFO_MISSION_ACK, MAVLINK_MESSAGE_INFO_SET_GPS_GLOBAL_ORIGIN, MAVLINK_MESSAGE_INFO_GPS_GLOBAL_ORIGIN, MAVLINK_MESSAGE_INFO_SET_LOCAL_POSITION_SETPOINT, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_SETPOINT, MAVLINK_MESSAGE_INFO_GLOBAL_POSITION_SETPOINT_INT, MAVLINK_MESSAGE_INFO_SET_GLOBAL_POSITION_SETPOINT_INT, MAVLINK_MESSAGE_INFO_SAFETY_SET_ALLOWED_AREA, MAVLINK_MESSAGE_INFO_SAFETY_ALLOWED_AREA, MAVLINK_MESSAGE_INFO_SET_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_SET_ROLL_PITCH_YAW_SPEED_THRUST, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_SPEED_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_SET_QUAD_MOTORS_SETPOINT, MAVLINK_MESSAGE_INFO_SET_QUAD_SWARM_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_NAV_CONTROLLER_OUTPUT, MAVLINK_MESSAGE_INFO_SET_QUAD_SWARM_LED_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_STATE_CORRECTION, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_REQUEST_DATA_STREAM, MAVLINK_MESSAGE_INFO_DATA_STREAM, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_MANUAL_CONTROL, MAVLINK_MESSAGE_INFO_RC_CHANNELS_OVERRIDE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_VFR_HUD, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_COMMAND_LONG, MAVLINK_MESSAGE_INFO_COMMAND_ACK, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_RATES_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_MANUAL_SETPOINT, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED_SYSTEM_GLOBAL_OFFSET, MAVLINK_MESSAGE_INFO_HIL_STATE, MAVLINK_MESSAGE_INFO_HIL_CONTROLS, MAVLINK_MESSAGE_INFO_HIL_RC_INPUTS_RAW, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_OPTICAL_FLOW, MAVLINK_MESSAGE_INFO_GLOBAL_VISION_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_VISION_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_VISION_SPEED_ESTIMATE, MAVLINK_MESSAGE_INFO_VICON_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_HIGHRES_IMU, MAVLINK_MESSAGE_INFO_OMNIDIRECTIONAL_FLOW, MAVLINK_MESSAGE_INFO_HIL_SENSOR, MAVLINK_MESSAGE_INFO_SIM_STATE, MAVLINK_MESSAGE_INFO_RADIO_STATUS, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_START, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_DIR_LIST, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_RES, MAVLINK_MESSAGE_INFO_HIL_GPS, MAVLINK_MESSAGE_INFO_HIL_OPTICAL_FLOW, MAVLINK_MESSAGE_INFO_HIL_STATE_QUATERNION, MAVLINK_MESSAGE_INFO_SCALED_IMU2, MAVLINK_MESSAGE_INFO_LOG_REQUEST_LIST, MAVLINK_MESSAGE_INFO_LOG_ENTRY, MAVLINK_MESSAGE_INFO_LOG_REQUEST_DATA, MAVLINK_MESSAGE_INFO_LOG_DATA, MAVLINK_MESSAGE_INFO_LOG_ERASE, MAVLINK_MESSAGE_INFO_LOG_REQUEST_END, MAVLINK_MESSAGE_INFO_GPS_INJECT_DATA, MAVLINK_MESSAGE_INFO_GPS2_RAW, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_DATA_TRANSMISSION_HANDSHAKE, MAVLINK_MESSAGE_INFO_ENCAPSULATED_DATA, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_BATTERY_STATUS, MAVLINK_MESSAGE_INFO_SETPOINT_8DOF, MAVLINK_MESSAGE_INFO_SETPOINT_6DOF, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_OBS_POSITION, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_OBS_VELOCITY, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_OBS_ATTITUDE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_OBS_WIND, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_OBS_AIR_VELOCITY, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_OBS_BIAS, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_OBS_QFF, MAVLINK_MESSAGE_INFO_OBS_AIR_TEMP, MAVLINK_MESSAGE_INFO_FILT_ROT_VEL, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_LLC_OUT, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_PM_ELEC, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_SYS_Stat, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_CMD_AIRSPEED_CHNG, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_CMD_AIRSPEED_ACK, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_MEMORY_VECT, MAVLINK_MESSAGE_INFO_DEBUG_VECT, MAVLINK_MESSAGE_INFO_NAMED_VALUE_FLOAT, MAVLINK_MESSAGE_INFO_NAMED_VALUE_INT, MAVLINK_MESSAGE_INFO_STATUSTEXT, MAVLINK_MESSAGE_INFO_DEBUG, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}} +#define MAVLINK_MESSAGE_INFO {MAVLINK_MESSAGE_INFO_HEARTBEAT, MAVLINK_MESSAGE_INFO_SYS_STATUS, MAVLINK_MESSAGE_INFO_SYSTEM_TIME, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_PING, MAVLINK_MESSAGE_INFO_CHANGE_OPERATOR_CONTROL, MAVLINK_MESSAGE_INFO_CHANGE_OPERATOR_CONTROL_ACK, MAVLINK_MESSAGE_INFO_AUTH_KEY, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_SET_MODE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_PARAM_REQUEST_READ, MAVLINK_MESSAGE_INFO_PARAM_REQUEST_LIST, MAVLINK_MESSAGE_INFO_PARAM_VALUE, MAVLINK_MESSAGE_INFO_PARAM_SET, MAVLINK_MESSAGE_INFO_GPS_RAW_INT, MAVLINK_MESSAGE_INFO_GPS_STATUS, MAVLINK_MESSAGE_INFO_SCALED_IMU, MAVLINK_MESSAGE_INFO_RAW_IMU, MAVLINK_MESSAGE_INFO_RAW_PRESSURE, MAVLINK_MESSAGE_INFO_SCALED_PRESSURE, MAVLINK_MESSAGE_INFO_ATTITUDE, MAVLINK_MESSAGE_INFO_ATTITUDE_QUATERNION, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED, MAVLINK_MESSAGE_INFO_GLOBAL_POSITION_INT, MAVLINK_MESSAGE_INFO_RC_CHANNELS_SCALED, MAVLINK_MESSAGE_INFO_RC_CHANNELS_RAW, MAVLINK_MESSAGE_INFO_SERVO_OUTPUT_RAW, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_PARTIAL_LIST, MAVLINK_MESSAGE_INFO_MISSION_WRITE_PARTIAL_LIST, MAVLINK_MESSAGE_INFO_MISSION_ITEM, MAVLINK_MESSAGE_INFO_MISSION_REQUEST, MAVLINK_MESSAGE_INFO_MISSION_SET_CURRENT, MAVLINK_MESSAGE_INFO_MISSION_CURRENT, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_LIST, MAVLINK_MESSAGE_INFO_MISSION_COUNT, MAVLINK_MESSAGE_INFO_MISSION_CLEAR_ALL, MAVLINK_MESSAGE_INFO_MISSION_ITEM_REACHED, MAVLINK_MESSAGE_INFO_MISSION_ACK, MAVLINK_MESSAGE_INFO_SET_GPS_GLOBAL_ORIGIN, MAVLINK_MESSAGE_INFO_GPS_GLOBAL_ORIGIN, MAVLINK_MESSAGE_INFO_SET_LOCAL_POSITION_SETPOINT, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_SETPOINT, MAVLINK_MESSAGE_INFO_GLOBAL_POSITION_SETPOINT_INT, MAVLINK_MESSAGE_INFO_SET_GLOBAL_POSITION_SETPOINT_INT, MAVLINK_MESSAGE_INFO_SAFETY_SET_ALLOWED_AREA, MAVLINK_MESSAGE_INFO_SAFETY_ALLOWED_AREA, MAVLINK_MESSAGE_INFO_SET_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_SET_ROLL_PITCH_YAW_SPEED_THRUST, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_SPEED_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_SET_QUAD_MOTORS_SETPOINT, MAVLINK_MESSAGE_INFO_SET_QUAD_SWARM_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_NAV_CONTROLLER_OUTPUT, MAVLINK_MESSAGE_INFO_SET_QUAD_SWARM_LED_ROLL_PITCH_YAW_THRUST, MAVLINK_MESSAGE_INFO_STATE_CORRECTION, MAVLINK_MESSAGE_INFO_RC_CHANNELS, MAVLINK_MESSAGE_INFO_REQUEST_DATA_STREAM, MAVLINK_MESSAGE_INFO_DATA_STREAM, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_MANUAL_CONTROL, MAVLINK_MESSAGE_INFO_RC_CHANNELS_OVERRIDE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_VFR_HUD, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_COMMAND_LONG, MAVLINK_MESSAGE_INFO_COMMAND_ACK, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_ROLL_PITCH_YAW_RATES_THRUST_SETPOINT, MAVLINK_MESSAGE_INFO_MANUAL_SETPOINT, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED_SYSTEM_GLOBAL_OFFSET, MAVLINK_MESSAGE_INFO_HIL_STATE, MAVLINK_MESSAGE_INFO_HIL_CONTROLS, MAVLINK_MESSAGE_INFO_HIL_RC_INPUTS_RAW, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_OPTICAL_FLOW, MAVLINK_MESSAGE_INFO_GLOBAL_VISION_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_VISION_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_VISION_SPEED_ESTIMATE, MAVLINK_MESSAGE_INFO_VICON_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_HIGHRES_IMU, MAVLINK_MESSAGE_INFO_OMNIDIRECTIONAL_FLOW, MAVLINK_MESSAGE_INFO_HIL_SENSOR, MAVLINK_MESSAGE_INFO_SIM_STATE, MAVLINK_MESSAGE_INFO_RADIO_STATUS, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_START, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_DIR_LIST, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_RES, MAVLINK_MESSAGE_INFO_HIL_GPS, MAVLINK_MESSAGE_INFO_HIL_OPTICAL_FLOW, MAVLINK_MESSAGE_INFO_HIL_STATE_QUATERNION, MAVLINK_MESSAGE_INFO_SCALED_IMU2, MAVLINK_MESSAGE_INFO_LOG_REQUEST_LIST, MAVLINK_MESSAGE_INFO_LOG_ENTRY, MAVLINK_MESSAGE_INFO_LOG_REQUEST_DATA, MAVLINK_MESSAGE_INFO_LOG_DATA, MAVLINK_MESSAGE_INFO_LOG_ERASE, MAVLINK_MESSAGE_INFO_LOG_REQUEST_END, MAVLINK_MESSAGE_INFO_GPS_INJECT_DATA, MAVLINK_MESSAGE_INFO_GPS2_RAW, MAVLINK_MESSAGE_INFO_POWER_STATUS, MAVLINK_MESSAGE_INFO_SERIAL_CONTROL, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_DATA_TRANSMISSION_HANDSHAKE, MAVLINK_MESSAGE_INFO_ENCAPSULATED_DATA, MAVLINK_MESSAGE_INFO_DISTANCE_SENSOR, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_BATTERY_STATUS, MAVLINK_MESSAGE_INFO_SETPOINT_8DOF, MAVLINK_MESSAGE_INFO_SETPOINT_6DOF, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_OBS_POSITION, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_OBS_VELOCITY, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_OBS_ATTITUDE, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_OBS_WIND, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_OBS_AIR_VELOCITY, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_OBS_BIAS, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_OBS_QFF, MAVLINK_MESSAGE_INFO_OBS_AIR_TEMP, MAVLINK_MESSAGE_INFO_FILT_ROT_VEL, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_LLC_OUT, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_PM_ELEC, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_SYS_Stat, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_CMD_AIRSPEED_CHNG, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_CMD_AIRSPEED_ACK, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}, MAVLINK_MESSAGE_INFO_MEMORY_VECT, MAVLINK_MESSAGE_INFO_DEBUG_VECT, MAVLINK_MESSAGE_INFO_NAMED_VALUE_FLOAT, MAVLINK_MESSAGE_INFO_NAMED_VALUE_INT, MAVLINK_MESSAGE_INFO_STATUSTEXT, MAVLINK_MESSAGE_INFO_DEBUG, {"EMPTY",0,{{"","",MAVLINK_TYPE_CHAR,0,0,0}}}} #endif #include "../protocol.h" diff --git a/mavlink/include/mavlink/v1.0/sensesoar/version.h b/mavlink/include/mavlink/v1.0/sensesoar/version.h index cdd683949..78d562803 100644 --- a/mavlink/include/mavlink/v1.0/sensesoar/version.h +++ b/mavlink/include/mavlink/v1.0/sensesoar/version.h @@ -5,7 +5,7 @@ #ifndef MAVLINK_VERSION_H #define MAVLINK_VERSION_H -#define MAVLINK_BUILD_DATE "Tue Feb 4 15:28:27 2014" +#define MAVLINK_BUILD_DATE "Sun Apr 13 09:39:00 2014" #define MAVLINK_WIRE_PROTOCOL_VERSION "1.0" #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255 diff --git a/src/drivers/gps/gps.cpp b/src/drivers/gps/gps.cpp index c72f692d7..a902bdf2f 100644 --- a/src/drivers/gps/gps.cpp +++ b/src/drivers/gps/gps.cpp @@ -282,8 +282,8 @@ GPS::task_main() _report.p_variance_m = 10.0f; _report.c_variance_rad = 0.1f; _report.fix_type = 3; - _report.eph_m = 10.0f; - _report.epv_m = 10.0f; + _report.eph_m = 3.0f; + _report.epv_m = 7.0f; _report.timestamp_velocity = hrt_absolute_time(); _report.vel_n_m_s = 0.0f; _report.vel_e_m_s = 0.0f; diff --git a/src/modules/commander/commander.cpp b/src/modules/commander/commander.cpp index 3720b5a3b..ce6de88ef 100644 --- a/src/modules/commander/commander.cpp +++ b/src/modules/commander/commander.cpp @@ -395,6 +395,11 @@ bool handle_command(struct vehicle_status_s *status, const struct safety_s *safe enum VEHICLE_CMD_RESULT result = VEHICLE_CMD_RESULT_UNSUPPORTED; bool ret = false; + /* only handle commands that are meant to be handled by this system and component */ + if (cmd->target_system != status->system_id || ((cmd->target_component != status->component_id) && (cmd->target_component != 0))) { // component_id 0: valid for all components + return false; + } + /* only handle high-priority commands here */ /* request to set different system mode */ @@ -587,11 +592,11 @@ bool handle_command(struct vehicle_status_s *status, const struct safety_s *safe break; default: - /* warn about unsupported commands */ + /* Warn about unsupported commands, this makes sense because only commands + * to this component ID (or all) are passed by mavlink. */ answer_command(*cmd, VEHICLE_CMD_RESULT_UNSUPPORTED); break; } - if (result != VEHICLE_CMD_RESULT_UNSUPPORTED) { /* already warned about unsupported commands in "default" case */ answer_command(*cmd, result); diff --git a/src/modules/fw_att_control/fw_att_control_main.cpp b/src/modules/fw_att_control/fw_att_control_main.cpp index f139c25f4..2f84dc963 100644 --- a/src/modules/fw_att_control/fw_att_control_main.cpp +++ b/src/modules/fw_att_control/fw_att_control_main.cpp @@ -660,18 +660,24 @@ FixedwingAttitudeControl::task_main() float airspeed; - /* if airspeed is smaller than min, the sensor is not giving good readings */ - if ((_airspeed.indicated_airspeed_m_s < 0.5f * _parameters.airspeed_min) || - !isfinite(_airspeed.indicated_airspeed_m_s) || + /* if airspeed is not updating, we assume the normal average speed */ + if (!isfinite(_airspeed.true_airspeed_m_s) || hrt_elapsed_time(&_airspeed.timestamp) > 1e6) { airspeed = _parameters.airspeed_trim; } else { - airspeed = _airspeed.indicated_airspeed_m_s; + airspeed = _airspeed.true_airspeed_m_s; } - float airspeed_scaling = _parameters.airspeed_trim / airspeed; - //warnx("aspd scale: %6.2f act scale: %6.2f", airspeed_scaling, actuator_scaling); + /* + * For scaling our actuators using anything less than the min (close to stall) + * speed doesn't make any sense - its the strongest reasonable deflection we + * want to do in flight and its the baseline a human pilot would choose. + * + * Forcing the scaling to this value allows reasonable handheld tests. + */ + + float airspeed_scaling = _parameters.airspeed_trim / ((airspeed < _parameters.airspeed_min) ? _parameters.airspeed_min : airspeed); float roll_sp = _parameters.rollsp_offset_rad; float pitch_sp = _parameters.pitchsp_offset_rad; diff --git a/src/modules/mavlink/mavlink_commands.cpp b/src/modules/mavlink/mavlink_commands.cpp new file mode 100644 index 000000000..1c1e097a4 --- /dev/null +++ b/src/modules/mavlink/mavlink_commands.cpp @@ -0,0 +1,73 @@ +/**************************************************************************** + * + * Copyright (c) 2014 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file mavlink_commands.cpp + * Mavlink commands stream implementation. + * + * @author Anton Babushkin <anton.babushkin@me.com> + */ + +#include "mavlink_commands.h" + +MavlinkCommandsStream::MavlinkCommandsStream(Mavlink *mavlink, mavlink_channel_t channel) : _channel(channel) +{ + _cmd_sub = mavlink->add_orb_subscription(ORB_ID(vehicle_command)); + _cmd = (struct vehicle_command_s *)_cmd_sub->get_data(); +} + +MavlinkCommandsStream::~MavlinkCommandsStream() +{ +} + +void +MavlinkCommandsStream::update(const hrt_abstime t) +{ + if (_cmd_sub->update(t)) { + /* only send commands for other systems/components */ + if (_cmd->target_system != mavlink_system.sysid || _cmd->target_component != mavlink_system.compid) { + mavlink_msg_command_long_send(_channel, + _cmd->target_system, + _cmd->target_component, + _cmd->command, + _cmd->confirmation, + _cmd->param1, + _cmd->param2, + _cmd->param3, + _cmd->param4, + _cmd->param5, + _cmd->param6, + _cmd->param7); + } + } +} diff --git a/src/modules/mavlink/mavlink_commands.h b/src/modules/mavlink/mavlink_commands.h new file mode 100644 index 000000000..6255d65df --- /dev/null +++ b/src/modules/mavlink/mavlink_commands.h @@ -0,0 +1,65 @@ +/**************************************************************************** + * + * Copyright (c) 2014 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file mavlink_commands.h + * Mavlink commands stream definition. + * + * @author Anton Babushkin <anton.babushkin@me.com> + */ + +#ifndef MAVLINK_COMMANDS_H_ +#define MAVLINK_COMMANDS_H_ + +#include <uORB/uORB.h> +#include <uORB/topics/vehicle_command.h> + +class Mavlink; +class MavlinkCommansStream; + +#include "mavlink_main.h" + +class MavlinkCommandsStream +{ +private: + MavlinkOrbSubscription *_cmd_sub; + struct vehicle_command_s *_cmd; + mavlink_channel_t _channel; + +public: + MavlinkCommandsStream(Mavlink *mavlink, mavlink_channel_t channel); + ~MavlinkCommandsStream(); + void update(const hrt_abstime t); +}; + +#endif /* MAVLINK_COMMANDS_H_ */ diff --git a/src/modules/mavlink/mavlink_main.cpp b/src/modules/mavlink/mavlink_main.cpp index 18df577fe..f4a4ce86c 100644 --- a/src/modules/mavlink/mavlink_main.cpp +++ b/src/modules/mavlink/mavlink_main.cpp @@ -81,6 +81,7 @@ #include "mavlink_messages.h" #include "mavlink_receiver.h" #include "mavlink_rate_limiter.h" +#include "mavlink_commands.h" /* oddly, ERROR is not defined for c++ */ #ifdef ERROR @@ -166,12 +167,12 @@ mavlink_send_uart_bytes(mavlink_channel_t channel, const uint8_t *ch, int length int buf_free = 0; if (instance->get_flow_control_enabled() - && ioctl(uart, FIONWRITE, (unsigned long)&buf_free) == 0) { + && ioctl(uart, FIONWRITE, (unsigned long)&buf_free) == 0) { if (buf_free == 0) { if (last_write_times[(unsigned)channel] != 0 && - hrt_elapsed_time(&last_write_times[(unsigned)channel]) > 500 * 1000UL) { + hrt_elapsed_time(&last_write_times[(unsigned)channel]) > 500 * 1000UL) { warnx("DISABLING HARDWARE FLOW CONTROL"); instance->enable_flow_control(false); @@ -185,12 +186,17 @@ mavlink_send_uart_bytes(mavlink_channel_t channel, const uint8_t *ch, int length } } - ssize_t ret = write(uart, ch, desired); - - if (ret != desired) { - // XXX do something here, but change to using FIONWRITE and OS buf size for detection + /* If the wait until transmit flag is on, only transmit after we've received messages. + Otherwise, transmit all the time. */ + if (instance->should_transmit()) { + ssize_t ret = write(uart, ch, desired); + if (ret != desired) { + // XXX do something here, but change to using FIONWRITE and OS buf size for detection + } } + + } static void usage(void); @@ -203,14 +209,21 @@ Mavlink::Mavlink() : _task_running(false), _hil_enabled(false), _is_usb_uart(false), + _wait_to_transmit(false), + _received_messages(false), _main_loop_delay(1000), _subscriptions(nullptr), _streams(nullptr), _mission_pub(-1), + _verbose(false), + _forwarding_on(false), + _passing_on(false), + _uart_fd(-1), _mavlink_param_queue_index(0), _subscribe_to_stream(nullptr), _subscribe_to_stream_rate(0.0f), _flow_control_enabled(true), + _message_buffer({}), /* performance counters */ _loop_perf(perf_alloc(PC_ELAPSED, "mavlink")) @@ -261,7 +274,6 @@ Mavlink::Mavlink() : errx(1, "instance ID is out of range"); break; } - } Mavlink::~Mavlink() @@ -394,6 +406,18 @@ Mavlink::instance_exists(const char *device_name, Mavlink *self) return false; } +void +Mavlink::forward_message(mavlink_message_t *msg, Mavlink *self) +{ + + Mavlink *inst; + LL_FOREACH(_mavlink_instances, inst) { + if (inst != self) { + inst->pass_message(msg); + } + } +} + int Mavlink::get_uart_fd(unsigned index) { @@ -1617,6 +1641,125 @@ Mavlink::configure_stream_threadsafe(const char *stream_name, const float rate) } int +Mavlink::message_buffer_init(int size) +{ + _message_buffer.size = size; + _message_buffer.write_ptr = 0; + _message_buffer.read_ptr = 0; + _message_buffer.data = (char*)malloc(_message_buffer.size); + return (_message_buffer.data == 0) ? ERROR : OK; +} + +void +Mavlink::message_buffer_destroy() +{ + _message_buffer.size = 0; + _message_buffer.write_ptr = 0; + _message_buffer.read_ptr = 0; + free(_message_buffer.data); +} + +int +Mavlink::message_buffer_count() +{ + int n = _message_buffer.write_ptr - _message_buffer.read_ptr; + + if (n < 0) { + n += _message_buffer.size; + } + + return n; +} + +int +Mavlink::message_buffer_is_empty() +{ + return _message_buffer.read_ptr == _message_buffer.write_ptr; +} + + +bool +Mavlink::message_buffer_write(void *ptr, int size) +{ + // bytes available to write + int available = _message_buffer.read_ptr - _message_buffer.write_ptr - 1; + + if (available < 0) { + available += _message_buffer.size; + } + + if (size > available) { + // buffer overflow + return false; + } + + char *c = (char *) ptr; + int n = _message_buffer.size - _message_buffer.write_ptr; // bytes to end of the buffer + + if (n < size) { + // message goes over end of the buffer + memcpy(&(_message_buffer.data[_message_buffer.write_ptr]), c, n); + _message_buffer.write_ptr = 0; + + } else { + n = 0; + } + + // now: n = bytes already written + int p = size - n; // number of bytes to write + memcpy(&(_message_buffer.data[_message_buffer.write_ptr]), &(c[n]), p); + _message_buffer.write_ptr = (_message_buffer.write_ptr + p) % _message_buffer.size; + return true; +} + +int +Mavlink::message_buffer_get_ptr(void **ptr, bool *is_part) +{ + // bytes available to read + int available = _message_buffer.write_ptr - _message_buffer.read_ptr; + + if (available == 0) { + return 0; // buffer is empty + } + + int n = 0; + + if (available > 0) { + // read pointer is before write pointer, all available bytes can be read + n = available; + *is_part = false; + + } else { + // read pointer is after write pointer, read bytes from read_ptr to end of the buffer + n = _message_buffer.size - _message_buffer.read_ptr; + *is_part = _message_buffer.write_ptr > 0; + } + + *ptr = &(_message_buffer.data[_message_buffer.read_ptr]); + return n; +} + +void +Mavlink::message_buffer_mark_read(int n) +{ + _message_buffer.read_ptr = (_message_buffer.read_ptr + n) % _message_buffer.size; +} + +void +Mavlink::pass_message(mavlink_message_t *msg) +{ + if (_passing_on) { + /* size is 8 bytes plus variable payload */ + int size = MAVLINK_NUM_NON_PAYLOAD_BYTES + msg->len; + pthread_mutex_lock(&_message_buffer_mutex); + message_buffer_write(msg, size); + pthread_mutex_unlock(&_message_buffer_mutex); + } +} + + + +int Mavlink::task_main(int argc, char *argv[]) { int ch; @@ -1632,7 +1775,7 @@ Mavlink::task_main(int argc, char *argv[]) * set error flag instead */ bool err_flag = false; - while ((ch = getopt(argc, argv, "b:r:d:m:v")) != EOF) { + while ((ch = getopt(argc, argv, "b:r:d:m:fpvw")) != EOF) { switch (ch) { case 'b': _baudrate = strtoul(optarg, NULL, 10); @@ -1672,10 +1815,22 @@ Mavlink::task_main(int argc, char *argv[]) break; + case 'f': + _forwarding_on = true; + break; + + case 'p': + _passing_on = true; + break; + case 'v': _verbose = true; break; + case 'w': + _wait_to_transmit = true; + break; + default: err_flag = true; break; @@ -1740,6 +1895,17 @@ Mavlink::task_main(int argc, char *argv[]) /* initialize mavlink text message buffering */ mavlink_logbuffer_init(&_logbuffer, 5); + /* if we are passing on mavlink messages, we need to prepare a buffer for this instance */ + if (_passing_on) { + /* initialize message buffer if multiplexing is on */ + if (OK != message_buffer_init(500)) { + errx(1, "can't allocate message buffer, exiting"); + } + + /* initialize message buffer mutex */ + pthread_mutex_init(&_message_buffer_mutex, NULL); + } + /* create the device node that's used for sending text log messages, etc. */ register_driver(MAVLINK_LOG_DEVICE, &fops, 0666, NULL); @@ -1766,6 +1932,8 @@ Mavlink::task_main(int argc, char *argv[]) struct vehicle_status_s *status = (struct vehicle_status_s *) status_sub->get_data(); + MavlinkCommandsStream commands_stream(this, _channel); + /* add default streams depending on mode and intervals depending on datarate */ float rate_mult = _datarate / 1000.0f; @@ -1783,6 +1951,8 @@ Mavlink::task_main(int argc, char *argv[]) configure_stream("LOCAL_POSITION_NED", 3.0f * rate_mult); configure_stream("RC_CHANNELS_RAW", 1.0f * rate_mult); configure_stream("NAMED_VALUE_FLOAT", 1.0f * rate_mult); + configure_stream("GLOBAL_POSITION_SETPOINT_INT", 3.0f * rate_mult); + configure_stream("ROLL_PITCH_YAW_THRUST_SETPOINT", 3.0f * rate_mult); break; case MAVLINK_MODE_CAMERA: @@ -1826,6 +1996,9 @@ Mavlink::task_main(int argc, char *argv[]) set_hil_enabled(status->hil_state == HIL_STATE_ON); } + /* update commands stream */ + commands_stream.update(t); + /* check for requested subscriptions */ if (_subscribe_to_stream != nullptr) { if (OK == configure_stream(_subscribe_to_stream, _subscribe_to_stream_rate)) { @@ -1884,6 +2057,37 @@ Mavlink::task_main(int argc, char *argv[]) } } + /* pass messages from other UARTs */ + if (_passing_on) { + + bool is_part; + void *read_ptr; + + /* guard get ptr by mutex */ + pthread_mutex_lock(&_message_buffer_mutex); + int available = message_buffer_get_ptr(&read_ptr, &is_part); + pthread_mutex_unlock(&_message_buffer_mutex); + + if (available > 0) { + /* write first part of buffer */ + _mavlink_resend_uart(_channel, (const mavlink_message_t*)read_ptr); + message_buffer_mark_read(available); + + /* write second part of buffer if there is some */ + if (is_part) { + /* guard get ptr by mutex */ + pthread_mutex_lock(&_message_buffer_mutex); + available = message_buffer_get_ptr(&read_ptr, &is_part); + pthread_mutex_unlock(&_message_buffer_mutex); + + _mavlink_resend_uart(_channel, (const mavlink_message_t*)read_ptr); + message_buffer_mark_read(available); + } + } + } + + + perf_end(_loop_perf); } @@ -1928,6 +2132,10 @@ Mavlink::task_main(int argc, char *argv[]) /* close mavlink logging device */ close(_mavlink_fd); + if (_passing_on) { + message_buffer_destroy(); + pthread_mutex_destroy(&_message_buffer_mutex); + } /* destroy log buffer */ mavlink_logbuffer_destroy(&_logbuffer); @@ -2067,7 +2275,7 @@ Mavlink::stream(int argc, char *argv[]) static void usage() { - warnx("usage: mavlink {start|stop-all|stream} [-d device] [-b baudrate] [-r rate] [-m mode] [-s stream] [-v]"); + warnx("usage: mavlink {start|stop-all|stream} [-d device] [-b baudrate] [-r rate] [-m mode] [-s stream] [-f] [-p] [-v] [-w]"); } int mavlink_main(int argc, char *argv[]) diff --git a/src/modules/mavlink/mavlink_main.h b/src/modules/mavlink/mavlink_main.h index 5a118a0ad..66d82b471 100644 --- a/src/modules/mavlink/mavlink_main.h +++ b/src/modules/mavlink/mavlink_main.h @@ -138,6 +138,8 @@ public: static bool instance_exists(const char *device_name, Mavlink *self); + static void forward_message(mavlink_message_t *msg, Mavlink *self); + static int get_uart_fd(unsigned index); int get_uart_fd(); @@ -153,10 +155,12 @@ public: void set_mode(enum MAVLINK_MODE); enum MAVLINK_MODE get_mode() { return _mode; } - bool get_hil_enabled() { return _hil_enabled; }; + bool get_hil_enabled() { return _hil_enabled; } bool get_flow_control_enabled() { return _flow_control_enabled; } + bool get_forwarding_on() { return _forwarding_on; } + /** * Handle waypoint related messages. */ @@ -196,6 +200,16 @@ public: bool _task_should_exit; /**< if true, mavlink task should exit */ + int get_mavlink_fd() { return _mavlink_fd; } + + + /* Functions for waiting to start transmission until message received. */ + void set_has_received_messages(bool received_messages) { _received_messages = received_messages; } + bool get_has_received_messages() { return _received_messages; } + void set_wait_to_transmit(bool wait) { _wait_to_transmit = wait; } + bool get_wait_to_transmit() { return _wait_to_transmit; } + bool should_transmit() { return (!_wait_to_transmit || (_wait_to_transmit && _received_messages)); } + protected: Mavlink *next; @@ -210,6 +224,8 @@ private: /* states */ bool _hil_enabled; /**< Hardware In the Loop mode */ bool _is_usb_uart; /**< Port is USB */ + bool _wait_to_transmit; /**< Wait to transmit until received messages. */ + bool _received_messages; /**< Whether we've received valid mavlink messages. */ unsigned _main_loop_delay; /**< mainloop delay, depends on data rate */ @@ -234,6 +250,8 @@ private: mavlink_wpm_storage *_wpm; bool _verbose; + bool _forwarding_on; + bool _passing_on; int _uart_fd; int _baudrate; int _datarate; @@ -252,6 +270,18 @@ private: bool _flow_control_enabled; + struct mavlink_message_buffer { + int write_ptr; + int read_ptr; + int size; + char *data; + }; + mavlink_message_buffer _message_buffer; + + pthread_mutex_t _message_buffer_mutex; + + + /** * Send one parameter. * @@ -315,6 +345,22 @@ private: int configure_stream(const char *stream_name, const float rate); void configure_stream_threadsafe(const char *stream_name, const float rate); + int message_buffer_init(int size); + + void message_buffer_destroy(); + + int message_buffer_count(); + + int message_buffer_is_empty(); + + bool message_buffer_write(void *ptr, int size); + + int message_buffer_get_ptr(void **ptr, bool *is_part); + + void message_buffer_mark_read(int n); + + void pass_message(mavlink_message_t *msg); + static int mavlink_dev_ioctl(struct file *filep, int cmd, unsigned long arg); /** diff --git a/src/modules/mavlink/mavlink_messages.cpp b/src/modules/mavlink/mavlink_messages.cpp index 4ca3840d4..648228e3b 100644 --- a/src/modules/mavlink/mavlink_messages.cpp +++ b/src/modules/mavlink/mavlink_messages.cpp @@ -262,22 +262,21 @@ protected: void send(const hrt_abstime t) { - if (status_sub->update(t)) { - mavlink_msg_sys_status_send(_channel, - status->onboard_control_sensors_present, - status->onboard_control_sensors_enabled, - status->onboard_control_sensors_health, - status->load * 1000.0f, - status->battery_voltage * 1000.0f, - status->battery_current * 1000.0f, - status->battery_remaining, - status->drop_rate_comm, - status->errors_comm, - status->errors_count1, - status->errors_count2, - status->errors_count3, - status->errors_count4); - } + status_sub->update(t); + mavlink_msg_sys_status_send(_channel, + status->onboard_control_sensors_present, + status->onboard_control_sensors_enabled, + status->onboard_control_sensors_health, + status->load * 1000.0f, + status->battery_voltage * 1000.0f, + status->battery_current * 1000.0f, + status->battery_remaining, + status->drop_rate_comm, + status->errors_comm, + status->errors_count1, + status->errors_count2, + status->errors_count3, + status->errors_count4); } }; @@ -641,6 +640,47 @@ protected: }; + +class MavlinkStreamViconPositionEstimate : public MavlinkStream +{ +public: + const char *get_name() + { + return "VICON_POSITION_ESTIMATE"; + } + + MavlinkStream *new_instance() + { + return new MavlinkStreamViconPositionEstimate(); + } + +private: + MavlinkOrbSubscription *pos_sub; + struct vehicle_vicon_position_s *pos; + +protected: + void subscribe(Mavlink *mavlink) + { + pos_sub = mavlink->add_orb_subscription(ORB_ID(vehicle_vicon_position)); + pos = (struct vehicle_vicon_position_s *)pos_sub->get_data(); + } + + void send(const hrt_abstime t) + { + if (pos_sub->update(t)) { + mavlink_msg_vicon_position_estimate_send(_channel, + pos->timestamp / 1000, + pos->x, + pos->y, + pos->z, + pos->roll, + pos->pitch, + pos->yaw); + } + } +}; + + class MavlinkStreamGPSGlobalOrigin : public MavlinkStream { public: @@ -1253,8 +1293,6 @@ protected: { status_sub = mavlink->add_orb_subscription(ORB_ID(vehicle_status)); status = (struct vehicle_status_s *)status_sub->get_data(); - - } void send(const hrt_abstime t) @@ -1265,11 +1303,11 @@ protected: || status->arming_state == ARMING_STATE_ARMED_ERROR) { /* send camera capture on */ - mavlink_msg_command_long_send(_channel, 42, 30, MAV_CMD_DO_CONTROL_VIDEO, 0, 0, 0, 0, 1, 0, 0, 0); + mavlink_msg_command_long_send(_channel, mavlink_system.sysid, 0, MAV_CMD_DO_CONTROL_VIDEO, 0, 0, 0, 0, 1, 0, 0, 0); } else { /* send camera capture off */ - mavlink_msg_command_long_send(_channel, 42, 30, MAV_CMD_DO_CONTROL_VIDEO, 0, 0, 0, 0, 0, 0, 0, 0); + mavlink_msg_command_long_send(_channel, mavlink_system.sysid, 0, MAV_CMD_DO_CONTROL_VIDEO, 0, 0, 0, 0, 0, 0, 0, 0); } } }; @@ -1300,5 +1338,6 @@ MavlinkStream *streams_list[] = { new MavlinkStreamAttitudeControls(), new MavlinkStreamNamedValueFloat(), new MavlinkStreamCameraCapture(), + new MavlinkStreamViconPositionEstimate(), nullptr }; diff --git a/src/modules/mavlink/mavlink_receiver.cpp b/src/modules/mavlink/mavlink_receiver.cpp index d7e300670..b4fe65fd2 100644 --- a/src/modules/mavlink/mavlink_receiver.cpp +++ b/src/modules/mavlink/mavlink_receiver.cpp @@ -181,6 +181,10 @@ MavlinkReceiver::handle_message(mavlink_message_t *msg) break; } } + + /* If we've received a valid message, mark the flag indicating so. + This is used in the '-w' command-line flag. */ + _mavlink->set_has_received_messages(true); } void @@ -222,12 +226,10 @@ MavlinkReceiver::handle_message_command_long(mavlink_message_t *msg) vcmd.source_component = msg->compid; vcmd.confirmation = cmd_mavlink.confirmation; - /* check if topic is advertised */ - if (_cmd_pub <= 0) { + if (_cmd_pub < 0) { _cmd_pub = orb_advertise(ORB_ID(vehicle_command), &vcmd); } else { - /* publish */ orb_publish(ORB_ID(vehicle_command), _cmd_pub, &vcmd); } } @@ -253,7 +255,7 @@ MavlinkReceiver::handle_message_optical_flow(mavlink_message_t *msg) f.quality = flow.quality; f.sensor_id = flow.sensor_id; - if (_flow_pub <= 0) { + if (_flow_pub < 0) { _flow_pub = orb_advertise(ORB_ID(optical_flow), &f); } else { @@ -287,7 +289,7 @@ MavlinkReceiver::handle_message_set_mode(mavlink_message_t *msg) vcmd.source_component = msg->compid; vcmd.confirmation = 1; - if (_cmd_pub <= 0) { + if (_cmd_pub < 0) { _cmd_pub = orb_advertise(ORB_ID(vehicle_command), &vcmd); } else { @@ -312,7 +314,7 @@ MavlinkReceiver::handle_message_vicon_position_estimate(mavlink_message_t *msg) vicon_position.pitch = pos.pitch; vicon_position.yaw = pos.yaw; - if (_vicon_position_pub <= 0) { + if (_vicon_position_pub < 0) { _vicon_position_pub = orb_advertise(ORB_ID(vehicle_vicon_position), &vicon_position); } else { @@ -373,7 +375,7 @@ MavlinkReceiver::handle_message_quad_swarm_roll_pitch_yaw_thrust(mavlink_message offboard_control_sp.timestamp = hrt_absolute_time(); - if (_offboard_control_sp_pub <= 0) { + if (_offboard_control_sp_pub < 0) { _offboard_control_sp_pub = orb_advertise(ORB_ID(offboard_control_setpoint), &offboard_control_sp); } else { @@ -401,7 +403,7 @@ MavlinkReceiver::handle_message_radio_status(mavlink_message_t *msg) tstatus.rxerrors = rstatus.rxerrors; tstatus.fixed = rstatus.fixed; - if (_telemetry_status_pub <= 0) { + if (_telemetry_status_pub < 0) { _telemetry_status_pub = orb_advertise(ORB_ID(telemetry_status), &tstatus); } else { @@ -428,7 +430,7 @@ MavlinkReceiver::handle_message_manual_control(mavlink_message_t *msg) rc.chan[2].scaled = man.r / 1000.0f; rc.chan[3].scaled = man.z / 1000.0f; - if (_rc_pub == 0) { + if (_rc_pub < 0) { _rc_pub = orb_advertise(ORB_ID(rc_channels), &rc); } else { @@ -450,7 +452,7 @@ MavlinkReceiver::handle_message_manual_control(mavlink_message_t *msg) manual.yaw = man.r / 1000.0f; manual.throttle = man.z / 1000.0f; - if (_manual_pub == 0) { + if (_manual_pub < 0) { _manual_pub = orb_advertise(ORB_ID(manual_control_setpoint), &manual); } else { @@ -619,11 +621,11 @@ MavlinkReceiver::handle_message_hil_sensor(mavlink_message_t *msg) hil_sensors.differential_pressure_timestamp = timestamp; /* publish combined sensor topic */ - if (_sensors_pub > 0) { - orb_publish(ORB_ID(sensor_combined), _sensors_pub, &hil_sensors); + if (_sensors_pub < 0) { + _sensors_pub = orb_advertise(ORB_ID(sensor_combined), &hil_sensors); } else { - _sensors_pub = orb_advertise(ORB_ID(sensor_combined), &hil_sensors); + orb_publish(ORB_ID(sensor_combined), _sensors_pub, &hil_sensors); } } @@ -638,11 +640,11 @@ MavlinkReceiver::handle_message_hil_sensor(mavlink_message_t *msg) hil_battery_status.current_a = 10.0f; hil_battery_status.discharged_mah = -1.0f; - if (_battery_pub > 0) { - orb_publish(ORB_ID(battery_status), _battery_pub, &hil_battery_status); + if (_battery_pub < 0) { + _battery_pub = orb_advertise(ORB_ID(battery_status), &hil_battery_status); } else { - _battery_pub = orb_advertise(ORB_ID(battery_status), &hil_battery_status); + orb_publish(ORB_ID(battery_status), _battery_pub, &hil_battery_status); } } @@ -694,11 +696,11 @@ MavlinkReceiver::handle_message_hil_gps(mavlink_message_t *msg) hil_gps.fix_type = gps.fix_type; hil_gps.satellites_visible = gps.satellites_visible; - if (_gps_pub > 0) { - orb_publish(ORB_ID(vehicle_gps_position), _gps_pub, &hil_gps); + if (_gps_pub < 0) { + _gps_pub = orb_advertise(ORB_ID(vehicle_gps_position), &hil_gps); } else { - _gps_pub = orb_advertise(ORB_ID(vehicle_gps_position), &hil_gps); + orb_publish(ORB_ID(vehicle_gps_position), _gps_pub, &hil_gps); } } @@ -752,11 +754,11 @@ MavlinkReceiver::handle_message_hil_state_quaternion(mavlink_message_t *msg) hil_attitude.pitchspeed = hil_state.pitchspeed; hil_attitude.yawspeed = hil_state.yawspeed; - if (_attitude_pub > 0) { - orb_publish(ORB_ID(vehicle_attitude), _attitude_pub, &hil_attitude); + if (_attitude_pub < 0) { + _attitude_pub = orb_advertise(ORB_ID(vehicle_attitude), &hil_attitude); } else { - _attitude_pub = orb_advertise(ORB_ID(vehicle_attitude), &hil_attitude); + orb_publish(ORB_ID(vehicle_attitude), _attitude_pub, &hil_attitude); } } @@ -775,11 +777,11 @@ MavlinkReceiver::handle_message_hil_state_quaternion(mavlink_message_t *msg) hil_global_pos.vel_d = hil_state.vz / 100.0f; hil_global_pos.yaw = hil_attitude.yaw; - if (_global_pos_pub > 0) { - orb_publish(ORB_ID(vehicle_global_position), _global_pos_pub, &hil_global_pos); + if (_global_pos_pub < 0) { + _global_pos_pub = orb_advertise(ORB_ID(vehicle_global_position), &hil_global_pos); } else { - _global_pos_pub = orb_advertise(ORB_ID(vehicle_global_position), &hil_global_pos); + orb_publish(ORB_ID(vehicle_global_position), _global_pos_pub, &hil_global_pos); } } @@ -816,11 +818,11 @@ MavlinkReceiver::handle_message_hil_state_quaternion(mavlink_message_t *msg) bool landed = (float)(hil_state.alt) / 1000.0f < (_hil_local_alt0 + 0.1f); // XXX improve? hil_local_pos.landed = landed; - if (_local_pos_pub > 0) { - orb_publish(ORB_ID(vehicle_local_position), _local_pos_pub, &hil_local_pos); + if (_local_pos_pub < 0) { + _local_pos_pub = orb_advertise(ORB_ID(vehicle_local_position), &hil_local_pos); } else { - _local_pos_pub = orb_advertise(ORB_ID(vehicle_local_position), &hil_local_pos); + orb_publish(ORB_ID(vehicle_local_position), _local_pos_pub, &hil_local_pos); } } @@ -857,11 +859,11 @@ MavlinkReceiver::handle_message_hil_state_quaternion(mavlink_message_t *msg) hil_battery_status.current_a = 10.0f; hil_battery_status.discharged_mah = -1.0f; - if (_battery_pub > 0) { - orb_publish(ORB_ID(battery_status), _battery_pub, &hil_battery_status); + if (_battery_pub < 0) { + _battery_pub = orb_advertise(ORB_ID(battery_status), &hil_battery_status); } else { - _battery_pub = orb_advertise(ORB_ID(battery_status), &hil_battery_status); + orb_publish(ORB_ID(battery_status), _battery_pub, &hil_battery_status); } } } @@ -913,6 +915,11 @@ MavlinkReceiver::receive_thread(void *arg) /* handle packet with parameter component */ _mavlink->mavlink_pm_message_handler(_mavlink->get_channel(), &msg); + + if (_mavlink->get_forwarding_on()) { + /* forward any messages to other mavlink instances */ + Mavlink::forward_message(&msg, _mavlink); + } } } } diff --git a/src/modules/mavlink/mavlink_receiver.h b/src/modules/mavlink/mavlink_receiver.h index 0a5a1b5c7..8ccb2a035 100644 --- a/src/modules/mavlink/mavlink_receiver.h +++ b/src/modules/mavlink/mavlink_receiver.h @@ -120,7 +120,6 @@ private: mavlink_status_t status; struct vehicle_local_position_s hil_local_pos; - int _manual_sub; orb_advert_t _global_pos_pub; orb_advert_t _local_pos_pub; orb_advert_t _attitude_pub; @@ -139,6 +138,7 @@ private: orb_advert_t _telemetry_status_pub; orb_advert_t _rc_pub; orb_advert_t _manual_pub; + int _manual_sub; int _hil_frames; uint64_t _old_timestamp; bool _hil_local_proj_inited; diff --git a/src/modules/mavlink/mavlink_stream.h b/src/modules/mavlink/mavlink_stream.h index 135e1bce0..def40d9ad 100644 --- a/src/modules/mavlink/mavlink_stream.h +++ b/src/modules/mavlink/mavlink_stream.h @@ -32,7 +32,7 @@ ****************************************************************************/ /** - * @file mavlink_stream.cpp + * @file mavlink_stream.h * Mavlink messages stream definition. * * @author Anton Babushkin <anton.babushkin@me.com> diff --git a/src/modules/mavlink/module.mk b/src/modules/mavlink/module.mk index f09efa2e6..c44354ff0 100644 --- a/src/modules/mavlink/module.mk +++ b/src/modules/mavlink/module.mk @@ -42,6 +42,9 @@ SRCS += mavlink_main.cpp \ mavlink_orb_subscription.cpp \ mavlink_messages.cpp \ mavlink_stream.cpp \ - mavlink_rate_limiter.cpp + mavlink_rate_limiter.cpp \ + mavlink_commands.cpp INCLUDE_DIRS += $(MAVLINK_SRC)/include/mavlink + +MAXOPTIMIZATION = -Os diff --git a/src/modules/position_estimator_inav/position_estimator_inav_main.c b/src/modules/position_estimator_inav/position_estimator_inav_main.c index 368fa6ee2..763b87563 100644 --- a/src/modules/position_estimator_inav/position_estimator_inav_main.c +++ b/src/modules/position_estimator_inav/position_estimator_inav_main.c @@ -763,7 +763,7 @@ int position_estimator_inav_thread_main(int argc, char *argv[]) float thrust = armed.armed ? actuator.control[3] : 0.0f; if (landed) { - if (alt_disp2 > land_disp2 && thrust > params.land_thr) { + if (alt_disp2 > land_disp2 || thrust > params.land_thr) { landed = false; landed_time = 0; } diff --git a/src/modules/position_estimator_inav/position_estimator_inav_params.c b/src/modules/position_estimator_inav/position_estimator_inav_params.c index b71f9472f..dcad5c03b 100644 --- a/src/modules/position_estimator_inav/position_estimator_inav_params.c +++ b/src/modules/position_estimator_inav/position_estimator_inav_params.c @@ -56,7 +56,7 @@ PARAM_DEFINE_FLOAT(INAV_SONAR_FILT, 0.05f); PARAM_DEFINE_FLOAT(INAV_SONAR_ERR, 0.5f); PARAM_DEFINE_FLOAT(INAV_LAND_T, 3.0f); PARAM_DEFINE_FLOAT(INAV_LAND_DISP, 0.7f); -PARAM_DEFINE_FLOAT(INAV_LAND_THR, 0.3f); +PARAM_DEFINE_FLOAT(INAV_LAND_THR, 0.2f); int parameters_init(struct position_estimator_inav_param_handles *h) { diff --git a/src/modules/sdlog2/sdlog2.c b/src/modules/sdlog2/sdlog2.c index e62b0fafc..1bf6f1de3 100644 --- a/src/modules/sdlog2/sdlog2.c +++ b/src/modules/sdlog2/sdlog2.c @@ -226,11 +226,11 @@ sdlog2_usage(const char *reason) } errx(1, "usage: sdlog2 {start|stop|status} [-r <log rate>] [-b <buffer size>] -e -a -t\n" - "\t-r\tLog rate in Hz, 0 means unlimited rate\n" - "\t-b\tLog buffer size in KiB, default is 8\n" - "\t-e\tEnable logging by default (if not, can be started by command)\n" - "\t-a\tLog only when armed (can be still overriden by command)\n" - "\t-t\tUse date/time for naming log directories and files\n"); + "\t-r\tLog rate in Hz, 0 means unlimited rate\n" + "\t-b\tLog buffer size in KiB, default is 8\n" + "\t-e\tEnable logging by default (if not, can be started by command)\n" + "\t-a\tLog only when armed (can be still overriden by command)\n" + "\t-t\tUse date/time for naming log directories and files\n"); } /** @@ -257,11 +257,11 @@ int sdlog2_main(int argc, char *argv[]) main_thread_should_exit = false; deamon_task = task_spawn_cmd("sdlog2", - SCHED_DEFAULT, - SCHED_PRIORITY_DEFAULT - 30, - 3000, - sdlog2_thread_main, - (const char **)argv); + SCHED_DEFAULT, + SCHED_PRIORITY_DEFAULT - 30, + 3000, + sdlog2_thread_main, + (const char **)argv); exit(0); } @@ -833,6 +833,7 @@ int sdlog2_thread_main(int argc, char *argv[]) struct log_TELE_s log_TELE; struct log_ESTM_s log_ESTM; struct log_PWR_s log_PWR; + struct log_VICN_s log_VICN; } body; } log_msg = { LOG_PACKET_HEADER_INIT(0) @@ -1163,7 +1164,14 @@ int sdlog2_thread_main(int argc, char *argv[]) /* --- VICON POSITION --- */ if (copy_if_updated(ORB_ID(vehicle_vicon_position), subs.vicon_pos_sub, &buf.vicon_pos)) { - // TODO not implemented yet + log_msg.msg_type = LOG_VICN_MSG; + log_msg.body.log_VICN.x = buf.vicon_pos.x; + log_msg.body.log_VICN.y = buf.vicon_pos.y; + log_msg.body.log_VICN.z = buf.vicon_pos.z; + log_msg.body.log_VICN.pitch = buf.vicon_pos.pitch; + log_msg.body.log_VICN.roll = buf.vicon_pos.roll; + log_msg.body.log_VICN.yaw = buf.vicon_pos.yaw; + LOGBUFFER_WRITE_AND_COUNT(VICN); } /* --- FLOW --- */ diff --git a/src/modules/sdlog2/sdlog2_messages.h b/src/modules/sdlog2/sdlog2_messages.h index a1a5856bc..d0585df39 100644 --- a/src/modules/sdlog2/sdlog2_messages.h +++ b/src/modules/sdlog2/sdlog2_messages.h @@ -301,6 +301,17 @@ struct log_PWR_s { uint8_t high_power_rail_overcurrent; }; +/* --- VICN - VICON POSITION --- */ +#define LOG_VICN_MSG 25 +struct log_VICN_s { + float x; + float y; + float z; + float roll; + float pitch; + float yaw; +}; + /********** SYSTEM MESSAGES, ID > 0x80 **********/ /* --- TIME - TIME STAMP --- */ @@ -351,6 +362,7 @@ static const struct log_format_s log_formats[] = { LOG_FORMAT(TELE, "BBBBHHB", "RSSI,RemRSSI,Noise,RemNoise,RXErr,Fixed,TXBuf"), LOG_FORMAT(ESTM, "ffffffffffBBBB", "s0,s1,s2,s3,s4,s5,s6,s7,s8,s9,n_states,states_nan,cov_nan,kgain_nan"), LOG_FORMAT(PWR, "fffBBBBB", "Periph_5V,Servo_5V,RSSI,USB_OK,BRICK_OK,SRV_OK,PERIPH_OC,HIPWR_OC"), + LOG_FORMAT(VICN, "ffffff", "X,Y,Z,Roll,Pitch,Yaw"), /* system-level messages, ID >= 0x80 */ /* FMT: don't write format of format message, it's useless */ |