diff options
Diffstat (limited to 'Debug/stm32f4x.cfg')
-rw-r--r-- | Debug/stm32f4x.cfg | 64 |
1 files changed, 0 insertions, 64 deletions
diff --git a/Debug/stm32f4x.cfg b/Debug/stm32f4x.cfg deleted file mode 100644 index 28bfcfbbb..000000000 --- a/Debug/stm32f4x.cfg +++ /dev/null @@ -1,64 +0,0 @@ -# script for stm32f2xxx - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME stm32f4xxx -} - -if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN -} else { - set _ENDIAN little -} - -# Work-area is a space in RAM used for flash programming -# By default use 64kB -if { [info exists WORKAREASIZE] } { - set _WORKAREASIZE $WORKAREASIZE -} else { - set _WORKAREASIZE 0x10000 -} - -# JTAG speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz -# -# Since we may be running of an RC oscilator, we crank down the speed a -# bit more to be on the safe side. Perhaps superstition, but if are -# running off a crystal, we can run closer to the limit. Note -# that there can be a pretty wide band where things are more or less stable. -jtag_khz 1000 - -jtag_nsrst_delay 100 -jtag_ntrst_delay 100 - -#jtag scan chain -if { [info exists CPUTAPID ] } { - set _CPUTAPID $CPUTAPID -} else { - # See STM Document RM0033 - # Section 32.6.3 - corresponds to Cortex-M3 r2p0 - set _CPUTAPID 0x4ba00477 -} -jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID - -if { [info exists BSTAPID ] } { - set _BSTAPID $BSTAPID -} else { - # See STM Document RM0033 - # Section 32.6.2 - # - set _BSTAPID 0x06413041 -} -jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID - -set _TARGETNAME $_CHIPNAME.cpu -target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME -rtos auto - -$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 - -set _FLASHNAME $_CHIPNAME.flash -flash bank $_FLASHNAME stm32f2x 0 0 0 0 $_TARGETNAME - -# if srst is not fitted use SYSRESETREQ to -# perform a soft reset -cortex_m3 reset_config sysresetreq |