diff options
Diffstat (limited to 'ROMFS/px4fmu_common/init.d/100_mpx_easystar')
-rw-r--r-- | ROMFS/px4fmu_common/init.d/100_mpx_easystar | 54 |
1 files changed, 34 insertions, 20 deletions
diff --git a/ROMFS/px4fmu_common/init.d/100_mpx_easystar b/ROMFS/px4fmu_common/init.d/100_mpx_easystar index e1cefdb99..4ed73909e 100644 --- a/ROMFS/px4fmu_common/init.d/100_mpx_easystar +++ b/ROMFS/px4fmu_common/init.d/100_mpx_easystar @@ -1,6 +1,6 @@ #!nsh -echo "[init] Multiplex Easystar" +echo "[init] PX4FMU v1, v2 with or without IO on EasyStar" # # Load default params for this platform @@ -20,28 +20,31 @@ fi # param set MAV_TYPE 1 -# -# Start MAVLink (depends on orb) -# -mavlink start -d /dev/ttyS1 -b 57600 -usleep 5000 +set EXIT_ON_END no # -# Start and configure PX4IO interface +# Start and configure PX4IO or FMU interface # -sh /etc/init.d/rc.io +if px4io detect +then + # Start MAVLink (depends on orb) + mavlink start + usleep 5000 -# -# Set actuator limit to 100 Hz update (50 Hz PWM) -px4io limit 100 - -# -# Start the commander -# -commander start + sh /etc/init.d/rc.io + # Limit to 100 Hz updates and (implicit) 50 Hz PWM + px4io limit 100 +else + # Start MAVLink (on UART1 / ttyS0) + mavlink start -d /dev/ttyS0 + usleep 5000 + fmu mode_pwm + param set BAT_V_SCALING 0.004593 + set EXIT_ON_END yes +fi # -# Start the sensors +# Start the sensors and test them. # sh /etc/init.d/rc.sensors @@ -49,9 +52,14 @@ sh /etc/init.d/rc.sensors # Start logging (depends on sensors) # sh /etc/init.d/rc.logging - + +# +# Start the commander. # -# Start GPS interface +commander start + +# +# Start GPS interface (depends on orb) # gps start @@ -65,4 +73,10 @@ att_pos_estimator_ekf start # mixer load /dev/pwm_output /etc/mixers/FMU_RET.mix fw_att_control start -fw_pos_control_l1 start +# Not ready yet for prime-time +#fw_pos_control_l1 start + +if [ $EXIT_ON_END == yes ] +then + exit +fi |