diff options
Diffstat (limited to 'ROMFS/px4fmu_common/init.d/2100_mpx_easystar')
| -rw-r--r-- | ROMFS/px4fmu_common/init.d/2100_mpx_easystar | 58 |
1 files changed, 7 insertions, 51 deletions
diff --git a/ROMFS/px4fmu_common/init.d/2100_mpx_easystar b/ROMFS/px4fmu_common/init.d/2100_mpx_easystar index 97c2d7c90..9bf01c60c 100644 --- a/ROMFS/px4fmu_common/init.d/2100_mpx_easystar +++ b/ROMFS/px4fmu_common/init.d/2100_mpx_easystar @@ -1,13 +1,12 @@ #!nsh -echo "[init] PX4FMU v1, v2 with or without IO on EasyStar" +echo "[init] EasyStar" -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 +if [ $DO_AUTOCONFIG == yes ] then - # Set all params here, then disable autoconfig + # + # Default parameters for this platform + # param set FW_P_D 0 param set FW_P_I 0 param set FW_P_IMAX 15 @@ -31,50 +30,7 @@ then param set FW_L1_PERIOD 16 param set RC_SCALE_ROLL 1.0 param set RC_SCALE_PITCH 1.0 - - param set SYS_AUTOCONFIG 0 - param save fi -# -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing -# -param set MAV_TYPE 1 - -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - - sh /etc/init.d/rc.io - # Limit to 100 Hz updates and (implicit) 50 Hz PWM - px4io limit 100 -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - - fmu mode_pwm - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi - -# -# Load mixer and start controllers (depends on px4io) -# -if [ -f /fs/microsd/etc/mixers/FMU_RET.mix ] -then - echo "Using /fs/microsd/etc/mixers/FMU_RET.mix" - mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_RET.mix -else - echo "Using /etc/mixers/FMU_RET.mix" - mixer load /dev/pwm_output /etc/mixers/FMU_RET.mix -fi - -# -# Start common fixedwing apps -# -sh /etc/init.d/rc.fixedwing +set FRAME_TYPE fw +set FRAME_GEOMETRY RET |