diff options
Diffstat (limited to 'ROMFS/px4fmu_common/init.d/3032_skywalker_x5')
| -rw-r--r-- | ROMFS/px4fmu_common/init.d/3032_skywalker_x5 | 85 |
1 files changed, 35 insertions, 50 deletions
diff --git a/ROMFS/px4fmu_common/init.d/3032_skywalker_x5 b/ROMFS/px4fmu_common/init.d/3032_skywalker_x5 index 41e041654..143310af9 100644 --- a/ROMFS/px4fmu_common/init.d/3032_skywalker_x5 +++ b/ROMFS/px4fmu_common/init.d/3032_skywalker_x5 @@ -1,58 +1,43 @@ #!nsh - -echo "[init] PX4FMU v1, v2 with or without IO on Skywalker X5" - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - # TODO - - param set SYS_AUTOCONFIG 0 - param save -fi - # -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing -# -param set MAV_TYPE 1 - +# Skywalker X5 Flying Wing # -# Start and configure PX4IO or FMU interface +# Maintainers: Thomas Gubler <thomasgubler@gmail.com>, Julian Oes <joes@student.ethz.ch> # -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - - sh /etc/init.d/rc.io - # Limit to 100 Hz updates and (implicit) 50 Hz PWM - px4io limit 100 -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - - fmu mode_pwm - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi -# -# Load mixer and start controllers (depends on px4io) -# -if [ -f /fs/microsd/etc/mixers/FMU_Q.mix ] +if [ $DO_AUTOCONFIG == yes ] then - echo "Using /fs/microsd/etc/mixers/FMU_Q.mix" - mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_Q.mix -else - echo "Using /etc/mixers/FMU_Q.mix" - mixer load /dev/pwm_output /etc/mixers/FMU_Q.mix + # + # Default parameters for this platform + # + param set FW_AIRSPD_MIN 7 + param set FW_AIRSPD_TRIM 9 + param set FW_AIRSPD_MAX 14 + param set FW_L1_PERIOD 10 + param set FW_P_D 0 + param set FW_P_I 0 + param set FW_P_IMAX 20 + param set FW_P_LIM_MAX 30 + param set FW_P_LIM_MIN -20 + param set FW_P_P 30 + param set FW_P_RMAX_NEG 0 + param set FW_P_RMAX_POS 0 + param set FW_P_ROLLFF 2 + param set FW_R_D 0 + param set FW_R_I 5 + param set FW_R_IMAX 20 + param set FW_R_P 60 + param set FW_R_RMAX 60 + param set FW_THR_CRUISE 0.65 + param set FW_THR_MAX 0.7 + param set FW_THR_MIN 0 + param set FW_T_SINK_MAX 5 + param set FW_T_SINK_MIN 2 + param set FW_T_TIME_CONST 9 + param set FW_Y_ROLLFF 2.0 + param set RC_SCALE_ROLL 1.0 + param set RC_SCALE_PITCH 1.0 fi -# -# Start common fixedwing apps -# -sh /etc/init.d/rc.fixedwing +set VEHICLE_TYPE fw +set MIXER FMU_X5 |