diff options
Diffstat (limited to 'ROMFS/px4fmu_common/init.d/30_io_camflyer')
| -rw-r--r-- | ROMFS/px4fmu_common/init.d/30_io_camflyer | 134 |
1 files changed, 39 insertions, 95 deletions
diff --git a/ROMFS/px4fmu_common/init.d/30_io_camflyer b/ROMFS/px4fmu_common/init.d/30_io_camflyer index 5090b98a4..8a8bc1590 100644 --- a/ROMFS/px4fmu_common/init.d/30_io_camflyer +++ b/ROMFS/px4fmu_common/init.d/30_io_camflyer @@ -1,26 +1,6 @@ #!nsh -# -# Flight startup script for PX4FMU+PX4IO -# - -# disable USB and autostart -set USB no -set MODE custom - -# -# Start the ORB (first app to start) -# -uorb start - -# -# Load microSD params -# -echo "[init] loading microSD params" -param select /fs/microsd/params -if [ -f /fs/microsd/params ] -then - param load /fs/microsd/params -fi + +echo "[init] PX4FMU v1, v2 with or without IO on Camflyer" # # Load default params for this platform @@ -28,94 +8,58 @@ fi if param compare SYS_AUTOCONFIG 1 then # Set all params here, then disable autoconfig + # TODO + param set SYS_AUTOCONFIG 0 - param save /fs/microsd/params + param save fi # # Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor -# see https://pixhawk.ethz.ch/mavlink/ +# MAV_TYPE 1 = fixed wing # param set MAV_TYPE 1 - + +set EXIT_ON_END no + # -# Check if PX4IO Firmware should be upgraded (from Andrew Tridgell) +# Start and configure PX4IO or FMU interface # -if [ -f /fs/microsd/px4io.bin ] +if px4io detect then - echo "PX4IO Firmware found. Checking Upgrade.." - if cmp /fs/microsd/px4io.bin /fs/microsd/px4io.bin.current - then - echo "No newer version, skipping upgrade." - else - echo "Loading /fs/microsd/px4io.bin" - if px4io update /fs/microsd/px4io.bin > /fs/microsd/px4io_update.log - then - cp /fs/microsd/px4io.bin /fs/microsd/px4io.bin.current - echo "Flashed /fs/microsd/px4io.bin OK" >> /fs/microsd/px4io_update.log - else - echo "Failed flashing /fs/microsd/px4io.bin" >> /fs/microsd/px4io_update.log - echo "Failed to upgrade PX4IO firmware - check if PX4IO is in bootloader mode" - fi - fi + # Start MAVLink (depends on orb) + mavlink start + + sh /etc/init.d/rc.io + # Limit to 100 Hz updates and (implicit) 50 Hz PWM + px4io limit 100 +else + # Start MAVLink (on UART1 / ttyS0) + mavlink start -d /dev/ttyS0 + + fmu mode_pwm + param set BAT_V_SCALING 0.004593 + set EXIT_ON_END yes fi - -# -# Start MAVLink (depends on orb) -# -mavlink start -d /dev/ttyS1 -b 57600 -usleep 5000 - -# -# Start the commander (depends on orb, mavlink) -# -commander start - -# -# Start PX4IO interface (depends on orb, commander) -# -px4io start - -# -# Allow PX4IO to recover from midair restarts. -# this is very unlikely, but quite safe and robust. -px4io recovery # -# Set actuator limit to 100 Hz update (50 Hz PWM) -px4io limit 100 - -# -# Start the sensors (depends on orb, px4io) -# -sh /etc/init.d/rc.sensors - -# -# Start GPS interface (depends on orb) -# -gps start - -# -# Start the attitude estimator (depends on orb) -# -kalman_demo start - -# # Load mixer and start controllers (depends on px4io) # -mixer load /dev/pwm_output /etc/mixers/FMU_Q.mix -control_demo start - -# -# Start logging -# -sdlog2 start -r 50 -a -b 14 - +if [ -f /fs/microsd/etc/mixers/FMU_Q.mix ] +then + echo "Using /fs/microsd/etc/mixers/FMU_Q.mix" + mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_Q.mix +else + echo "Using /etc/mixers/FMU_Q.mix" + mixer load /dev/pwm_output /etc/mixers/FMU_Q.mix +fi + # -# Start system state +# Start common fixedwing apps # -if blinkm start +sh /etc/init.d/rc.fixedwing + +if [ $EXIT_ON_END == yes ] then - blinkm systemstate -fi + exit +fi
\ No newline at end of file |