diff options
Diffstat (limited to 'ROMFS/px4fmu_common/init.d/31_io_phantom')
| -rw-r--r-- | ROMFS/px4fmu_common/init.d/31_io_phantom | 100 |
1 files changed, 23 insertions, 77 deletions
diff --git a/ROMFS/px4fmu_common/init.d/31_io_phantom b/ROMFS/px4fmu_common/init.d/31_io_phantom index 5090b98a4..718313862 100644 --- a/ROMFS/px4fmu_common/init.d/31_io_phantom +++ b/ROMFS/px4fmu_common/init.d/31_io_phantom @@ -1,26 +1,6 @@ #!nsh -# -# Flight startup script for PX4FMU+PX4IO -# - -# disable USB and autostart -set USB no -set MODE custom - -# -# Start the ORB (first app to start) -# -uorb start - -# -# Load microSD params -# -echo "[init] loading microSD params" -param select /fs/microsd/params -if [ -f /fs/microsd/params ] -then - param load /fs/microsd/params -fi + +echo "[init] 31_io_phantom: PX4FMU+PX4IO on Phantom" # # Load default params for this platform @@ -28,94 +8,60 @@ fi if param compare SYS_AUTOCONFIG 1 then # Set all params here, then disable autoconfig + # TODO + param set SYS_AUTOCONFIG 0 param save /fs/microsd/params fi # # Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor -# see https://pixhawk.ethz.ch/mavlink/ +# MAV_TYPE 1 = fixed wing # param set MAV_TYPE 1 - -# -# Check if PX4IO Firmware should be upgraded (from Andrew Tridgell) -# -if [ -f /fs/microsd/px4io.bin ] -then - echo "PX4IO Firmware found. Checking Upgrade.." - if cmp /fs/microsd/px4io.bin /fs/microsd/px4io.bin.current - then - echo "No newer version, skipping upgrade." - else - echo "Loading /fs/microsd/px4io.bin" - if px4io update /fs/microsd/px4io.bin > /fs/microsd/px4io_update.log - then - cp /fs/microsd/px4io.bin /fs/microsd/px4io.bin.current - echo "Flashed /fs/microsd/px4io.bin OK" >> /fs/microsd/px4io_update.log - else - echo "Failed flashing /fs/microsd/px4io.bin" >> /fs/microsd/px4io_update.log - echo "Failed to upgrade PX4IO firmware - check if PX4IO is in bootloader mode" - fi - fi -fi - + # # Start MAVLink (depends on orb) # mavlink start -d /dev/ttyS1 -b 57600 usleep 5000 - -# -# Start the commander (depends on orb, mavlink) -# -commander start - -# -# Start PX4IO interface (depends on orb, commander) + # -px4io start - +# Start and configure PX4IO interface # -# Allow PX4IO to recover from midair restarts. -# this is very unlikely, but quite safe and robust. -px4io recovery +sh /etc/init.d/rc.io # # Set actuator limit to 100 Hz update (50 Hz PWM) px4io limit 100 # -# Start the sensors (depends on orb, px4io) +# Start the commander # -sh /etc/init.d/rc.sensors +commander start # -# Start GPS interface (depends on orb) +# Start the sensors # -gps start - +sh /etc/init.d/rc.sensors + # -# Start the attitude estimator (depends on orb) +# Start logging (depends on sensors) # -kalman_demo start +sh /etc/init.d/rc.logging # -# Load mixer and start controllers (depends on px4io) +# Start GPS interface # -mixer load /dev/pwm_output /etc/mixers/FMU_Q.mix -control_demo start +gps start # -# Start logging +# Start the attitude estimator # -sdlog2 start -r 50 -a -b 14 +kalman_demo start # -# Start system state +# Load mixer and start controllers (depends on px4io) # -if blinkm start -then - blinkm systemstate -fi +mixer load /dev/pwm_output /etc/mixers/FMU_Q.mix +fw_att_control start |