diff options
Diffstat (limited to 'ROMFS/px4fmu_common/init.d/rc.custom_dji_f330_mkblctrl')
| -rw-r--r-- | ROMFS/px4fmu_common/init.d/rc.custom_dji_f330_mkblctrl | 113 |
1 files changed, 0 insertions, 113 deletions
diff --git a/ROMFS/px4fmu_common/init.d/rc.custom_dji_f330_mkblctrl b/ROMFS/px4fmu_common/init.d/rc.custom_dji_f330_mkblctrl deleted file mode 100644 index 40b2ee68b..000000000 --- a/ROMFS/px4fmu_common/init.d/rc.custom_dji_f330_mkblctrl +++ /dev/null @@ -1,113 +0,0 @@ -#!nsh - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set SYS_AUTOCONFIG 0 - - param set MC_ATTRATE_D 0.002 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_P 0.09 - param set MC_ATT_D 0.0 - param set MC_ATT_I 0.0 - param set MC_ATT_P 6.8 - param set MC_YAWPOS_D 0.0 - param set MC_YAWPOS_I 0.0 - param set MC_YAWPOS_P 2.0 - param set MC_YAWRATE_D 0.005 - param set MC_YAWRATE_I 0.2 - param set MC_YAWRATE_P 0.3 - param set NAV_TAKEOFF_ALT 3.0 - param set MPC_TILT_MAX 0.5 - param set MPC_THR_MAX 0.7 - param set MPC_THR_MIN 0.3 - param set MPC_XY_D 0 - param set MPC_XY_P 0.5 - param set MPC_XY_VEL_D 0 - param set MPC_XY_VEL_I 0 - param set MPC_XY_VEL_MAX 3 - param set MPC_XY_VEL_P 0.2 - param set MPC_Z_D 0 - param set MPC_Z_P 1 - param set MPC_Z_VEL_D 0 - param set MPC_Z_VEL_I 0.1 - param set MPC_Z_VEL_MAX 2 - param set MPC_Z_VEL_P 0.20 - - param save -fi - -# -# Force some key parameters to sane values -# MAV_TYPE 2 = quadrotor -# -param set MAV_TYPE 2 - -set EXIT_ON_END no - -# -# Start the Mikrokopter ESC driver -# -if [ $MKBLCTRL_MODE == yes ] -then - if [ $MKBLCTRL_FRAME == x ] - then - echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 X Frame Mikrokopter-Addressing" - mkblctrl -mkmode x - else - echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 + Frame Mikrokopter-Addressing" - mkblctrl -mkmode + - fi -else - if [ $MKBLCTRL_FRAME == x ] - then - echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 X Frame" - else - echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 + Frame" - fi - mkblctrl -fi - -usleep 10000 - -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - usleep 5000 - - sh /etc/init.d/rc.io -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - usleep 5000 - fmu mode_pwm - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi - -# -# Load mixer -# -if [ $MKBLCTRL_FRAME == x ] -then - mixer load /dev/mkblctrl /etc/mixers/FMU_quad_x.mix -else - mixer load /dev/mkblctrl /etc/mixers/FMU_quad_+.mix -fi - -# -# Start common for all multirotors apps -# -sh /etc/init.d/rc.multirotor - -if [ $EXIT_ON_END == yes ] -then - exit -fi |