diff options
Diffstat (limited to 'ROMFS/px4fmu_common/init.d/rcS')
-rw-r--r-- | ROMFS/px4fmu_common/init.d/rcS | 120 |
1 files changed, 82 insertions, 38 deletions
diff --git a/ROMFS/px4fmu_common/init.d/rcS b/ROMFS/px4fmu_common/init.d/rcS index e6a748f8f..05657b03e 100644 --- a/ROMFS/px4fmu_common/init.d/rcS +++ b/ROMFS/px4fmu_common/init.d/rcS @@ -194,64 +194,103 @@ then tone_alarm MNGGG fi fi + + set EXIT_ON_END no # # Check if auto-setup from one of the standard scripts is wanted # SYS_AUTOSTART = 0 means no autostart (default) # + # AUTOSTART PARTITION: + # 0 .. 999 Reserved (historical) + # 1000 .. 1999 Simulation setups + # 2000 .. 2999 Standard planes + # 3000 .. 3999 Flying wing + # 4000 .. 4999 Quad X + # 5000 .. 5999 Quad + + # 6000 .. 6999 Hexa X + # 7000 .. 7999 Hexa + + # 8000 .. 8999 Octo X + # 9000 .. 9999 Octo + + # 10000 .. 19999 Wide arm / H frame - if param compare SYS_AUTOSTART 8 + if param compare SYS_AUTOSTART 4008 8 then - sh /etc/init.d/08_ardrone + sh /etc/init.d/4008_ardrone set MODE custom fi - if param compare SYS_AUTOSTART 9 + if param compare SYS_AUTOSTART 4009 9 then - sh /etc/init.d/09_ardrone_flow + sh /etc/init.d/4009_ardrone_flow set MODE custom fi - if param compare SYS_AUTOSTART 10 + if param compare SYS_AUTOSTART 4010 10 then - sh /etc/init.d/10_dji_f330 + set FRAME_GEOMETRY x + set FRAME_COUNT 4 + set PWM_MIN 1200 + set PWM_MAX 1900 + set PWM_DISARMED 900 + sh /etc/init.d/4010_dji_f330 set MODE custom fi - if param compare SYS_AUTOSTART 11 + if param compare SYS_AUTOSTART 4011 11 then - sh /etc/init.d/11_dji_f450 + sh /etc/init.d/4011_dji_f450 set MODE custom fi - if param compare SYS_AUTOSTART 12 + if param compare SYS_AUTOSTART 4012 + then + sh /etc/init.d/666_fmu_q_x550 + set MODE custom + fi + + if param compare SYS_AUTOSTART 6012 12 then set MIXER /etc/mixers/FMU_hex_x.mix - sh /etc/init.d/12-13_hex + sh /etc/init.d/rc.hexa set MODE custom fi - if param compare SYS_AUTOSTART 13 + if param compare SYS_AUTOSTART 7013 13 then set MIXER /etc/mixers/FMU_hex_+.mix - sh /etc/init.d/12-13_hex + sh /etc/init.d/rc.hexa + set MODE custom + fi + + if param compare SYS_AUTOSTART 8001 + then + set MIXER /etc/mixers/FMU_octo_x.mix + sh /etc/init.d/rc.octo + set MODE custom + fi + + if param compare SYS_AUTOSTART 9001 + then + set MIXER /etc/mixers/FMU_octo_+.mix + sh /etc/init.d/rc.octo set MODE custom fi - if param compare SYS_AUTOSTART 15 + if param compare SYS_AUTOSTART 10015 15 then - sh /etc/init.d/15_tbs_discovery + sh /etc/init.d/10015_tbs_discovery set MODE custom fi - if param compare SYS_AUTOSTART 16 + if param compare SYS_AUTOSTART 10016 16 then - sh /etc/init.d/16_3dr_iris + sh /etc/init.d/10016_3dr_iris set MODE custom fi # PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 X Frame - if param compare SYS_AUTOSTART 17 + if param compare SYS_AUTOSTART 4017 17 then set MKBLCTRL_MODE no set MKBLCTRL_FRAME x @@ -260,7 +299,7 @@ then fi # PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 + Frame - if param compare SYS_AUTOSTART 18 + if param compare SYS_AUTOSTART 5018 18 then set MKBLCTRL_MODE no set MKBLCTRL_FRAME + @@ -269,7 +308,7 @@ then fi # PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 X Frame Mikrokopter-Addressing - if param compare SYS_AUTOSTART 19 + if param compare SYS_AUTOSTART 4019 19 then set MKBLCTRL_MODE yes set MKBLCTRL_FRAME x @@ -278,7 +317,7 @@ then fi # PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 + Frame Mikrokopter-Addressing - if param compare SYS_AUTOSTART 20 + if param compare SYS_AUTOSTART 5020 20 then set MKBLCTRL_MODE yes set MKBLCTRL_FRAME + @@ -287,7 +326,7 @@ then fi # PX4FMU v1 with IO + PPM-based ESCs on Quad X-shape frame - if param compare SYS_AUTOSTART 21 + if param compare SYS_AUTOSTART 4021 21 then set FRAME_GEOMETRY x set ESC_MAKER afro @@ -296,40 +335,40 @@ then fi # PX4FMU v1 with IO + PPM-based ESCs on Quad X-shape frame - if param compare SYS_AUTOSTART 22 + if param compare SYS_AUTOSTART 10022 22 then set FRAME_GEOMETRY w sh /etc/init.d/rc.custom_io_esc set MODE custom fi - if param compare SYS_AUTOSTART 30 + if param compare SYS_AUTOSTART 3030 30 then - sh /etc/init.d/30_io_camflyer + sh /etc/init.d/3030_io_camflyer set MODE custom fi - if param compare SYS_AUTOSTART 31 + if param compare SYS_AUTOSTART 3031 31 then - sh /etc/init.d/31_io_phantom + sh /etc/init.d/3031_io_phantom set MODE custom fi - if param compare SYS_AUTOSTART 32 + if param compare SYS_AUTOSTART 3032 32 then - sh /etc/init.d/32_skywalker_x5 + sh /etc/init.d/3032_skywalker_x5 set MODE custom fi - if param compare SYS_AUTOSTART 33 + if param compare SYS_AUTOSTART 3033 33 then - sh /etc/init.d/33_io_wingwing + sh /etc/init.d/3033_io_wingwing set MODE custom fi - if param compare SYS_AUTOSTART 34 + if param compare SYS_AUTOSTART 3034 34 then - sh /etc/init.d/34_io_fx79 + sh /etc/init.d/3034_io_fx79 set MODE custom fi @@ -339,21 +378,21 @@ then set MODE custom fi - if param compare SYS_AUTOSTART 100 + if param compare SYS_AUTOSTART 2100 100 then - sh /etc/init.d/100_mpx_easystar + sh /etc/init.d/2100_mpx_easystar set MODE custom fi - if param compare SYS_AUTOSTART 101 + if param compare SYS_AUTOSTART 2101 101 then - sh /etc/init.d/101_hk_bixler + sh /etc/init.d/2101_hk_bixler set MODE custom fi - if param compare SYS_AUTOSTART 102 + if param compare SYS_AUTOSTART 2102 102 then - sh /etc/init.d/102_3dr_skywalker + sh /etc/init.d/2102_3dr_skywalker set MODE custom fi @@ -402,5 +441,10 @@ then fi + if [ $EXIT_ON_END == yes ] + then + exit + fi + # End of autostart fi |