diff options
Diffstat (limited to 'ROMFS')
-rw-r--r-- | ROMFS/px4fmu_common/init.d/01_fmu_quad_x | 52 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/02_io_quad_x | 88 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/08_ardrone | 73 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/09_ardrone_flow | 67 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/10_io_f330 | 80 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/15_io_tbs | 91 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/30_io_camflyer | 64 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/31_io_phantom | 93 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/40_io_segway | 82 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/666_fmu_q_x550 (renamed from ROMFS/px4fmu_common/init.d/666_fmu_quad_x550) | 78 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/rc.io | 23 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/rc.logging | 7 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/rc.multirotor | 10 | ||||
-rwxr-xr-x | ROMFS/px4fmu_common/init.d/rcS | 299 |
14 files changed, 321 insertions, 786 deletions
diff --git a/ROMFS/px4fmu_common/init.d/01_fmu_quad_x b/ROMFS/px4fmu_common/init.d/01_fmu_quad_x index 8223b3ea5..f57e4bd68 100644 --- a/ROMFS/px4fmu_common/init.d/01_fmu_quad_x +++ b/ROMFS/px4fmu_common/init.d/01_fmu_quad_x @@ -1,28 +1,6 @@ #!nsh -# -# Flight startup script for PX4FMU with PWM outputs. -# - -# disable USB and autostart -set USB no -set MODE custom - -echo "[init] doing PX4FMU Quad startup..." - -# -# Start the ORB -# -uorb start - -# -# Load microSD params -# -echo "[init] loading microSD params" -param select /fs/microsd/params -if [ -f /fs/microsd/params ] -then - param load /fs/microsd/params -fi + +echo "[init] 01_fmu_quad_x: PX4FMU Quad X with PWM outputs" # # Load default params for this platform @@ -52,11 +30,10 @@ fi # # Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor -# see https://pixhawk.ethz.ch/mavlink/ +# MAV_TYPE 2 = quadrotor # param set MAV_TYPE 2 - + # # Start MAVLink # @@ -64,19 +41,24 @@ mavlink start -d /dev/ttyS0 -b 57600 usleep 5000 # -# Start common for all multirotors apps +# Start PWM output # -sh /etc/init.d/rc.multirotor +fmu mode_pwm # -# Start PWM output +# Load mixer # -fmu mode_pwm mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix + +# +# Set PWM output frequency +# pwm -u 400 -m 0xff - -# Try to get an USB console -nshterm /dev/ttyACM0 & +# +# Start common for all multirotors apps +# +sh /etc/init.d/rc.multirotor + # Exit, because /dev/ttyS0 is needed for MAVLink -#exit +exit diff --git a/ROMFS/px4fmu_common/init.d/02_io_quad_x b/ROMFS/px4fmu_common/init.d/02_io_quad_x index 49483d14f..a37c26ad1 100644 --- a/ROMFS/px4fmu_common/init.d/02_io_quad_x +++ b/ROMFS/px4fmu_common/init.d/02_io_quad_x @@ -1,26 +1,6 @@ #!nsh -# -# Flight startup script for PX4FMU+PX4IO -# - -# disable USB and autostart -set USB no -set MODE custom - -# -# Start the ORB (first app to start) -# -uorb start - -# -# Load microSD params -# -echo "[init] loading microSD params" -param select /fs/microsd/params -if [ -f /fs/microsd/params ] -then - param load /fs/microsd/params -fi + +echo "[init] 02_io_quad_x: PX4FMU+PX4IO Quad X with PWM outputs" # # Load default params for this platform @@ -28,74 +8,40 @@ fi if param compare SYS_AUTOCONFIG 1 then # Set all params here, then disable autoconfig + # TODO + param set SYS_AUTOCONFIG 0 param save /fs/microsd/params fi - + # # Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor -# see https://pixhawk.ethz.ch/mavlink/ +# MAV_TYPE 2 = quadrotor # param set MAV_TYPE 2 # -# Start MAVLink (depends on orb) +# Start MAVLink # mavlink start -d /dev/ttyS1 -b 57600 usleep 5000 - -# -# Start the commander (depends on orb, mavlink) -# -commander start - -# -# Start PX4IO interface (depends on orb, commander) -# -px4io start - -# -# Allow PX4IO to recover from midair restarts. -# this is very unlikely, but quite safe and robust. -px4io recovery # -# Disable px4io topic limiting -# -px4io limit 200 - -# -# Start the sensors (depends on orb, px4io) -# -sh /etc/init.d/rc.sensors - -# -# Start GPS interface (depends on orb) -# -gps start - -# -# Start the attitude estimator (depends on orb) +# Start and configure PX4IO interface # -attitude_estimator_ekf start - +sh /etc/init.d/rc.io + # -# Load mixer and start controllers (depends on px4io) +# Load mixer # mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix -pwm -u 400 -m 0xff -multirotor_att_control start - + # -# Start logging once armed +# Set PWM output frequency # -sdlog2 start -r 50 -a -b 14 - +pwm -u 400 -m 0xff + # -# Start system state +# Start common for all multirotors apps # -if blinkm start -then - blinkm systemstate -fi +sh /etc/init.d/rc.multirotor diff --git a/ROMFS/px4fmu_common/init.d/08_ardrone b/ROMFS/px4fmu_common/init.d/08_ardrone index 5bb1491e9..eb9f82f77 100644 --- a/ROMFS/px4fmu_common/init.d/08_ardrone +++ b/ROMFS/px4fmu_common/init.d/08_ardrone @@ -1,86 +1,45 @@ #!nsh -# -# Flight startup script for PX4FMU on PX4IOAR carrier board. -# - -echo "[init] doing PX4IOAR startup..." - -# -# Start the ORB -# -uorb start + +echo "[init] 08_ardrone: PX4FMU on PX4IOAR carrier board" # -# Load microSD params +# Load default params for this platform # -echo "[init] loading microSD params" -param select /fs/microsd/params -if [ -f /fs/microsd/params ] +if param compare SYS_AUTOCONFIG 1 then - param load /fs/microsd/params + # Set all params here, then disable autoconfig + # TODO + + param set SYS_AUTOCONFIG 0 + param save /fs/microsd/params fi # # Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor -# see https://pixhawk.ethz.ch/mavlink/ +# MAV_TYPE 2 = quadrotor # param set MAV_TYPE 2 # -# Configure PX4FMU for operation with PX4IOAR -# -fmu mode_gpio_serial - -# -# Start the sensors. -# -sh /etc/init.d/rc.sensors - -# # Start MAVLink # mavlink start -d /dev/ttyS0 -b 57600 usleep 5000 - -# -# Start the commander. -# -commander start - -# -# Start the attitude estimator -# -attitude_estimator_ekf start - + # -# Fire up the multi rotor attitude controller +# Configure PX4FMU for operation with PX4IOAR # -multirotor_att_control start +fmu mode_gpio_serial # # Fire up the AR.Drone interface. # ardrone_interface start -d /dev/ttyS1 - -# -# Start logging once armed -# -sdlog2 start -r 50 -a -b 14 - -# -# Start GPS capture -# -gps start # -# startup is done; we don't want the shell because we -# use the same UART for telemetry +# Start common for all multirotors apps # -echo "[init] startup done" - -# Try to get an USB console -nshterm /dev/ttyACM0 & - +sh /etc/init.d/rc.multirotor + # Exit, because /dev/ttyS0 is needed for MAVLink exit diff --git a/ROMFS/px4fmu_common/init.d/09_ardrone_flow b/ROMFS/px4fmu_common/init.d/09_ardrone_flow index a223ef7aa..44fbb79b7 100644 --- a/ROMFS/px4fmu_common/init.d/09_ardrone_flow +++ b/ROMFS/px4fmu_common/init.d/09_ardrone_flow @@ -1,36 +1,41 @@ #!nsh + +echo "[init] 09_ardrone_flow: PX4FMU on PX4IOAR carrier board with PX4FLOW" + # -# Flight startup script for PX4FMU on PX4IOAR carrier board. -# - -echo "[init] doing PX4IOAR startup..." - -# -# Start the ORB -# -uorb start - -# -# Load microSD params +# Load default params for this platform # -echo "[init] loading microSD params" -param select /fs/microsd/params -if [ -f /fs/microsd/params ] +if param compare SYS_AUTOCONFIG 1 then - param load /fs/microsd/params + # Set all params here, then disable autoconfig + # TODO + + param set SYS_AUTOCONFIG 0 + param save /fs/microsd/params fi # # Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor -# see https://pixhawk.ethz.ch/mavlink/ +# MAV_TYPE 2 = quadrotor # param set MAV_TYPE 2 # +# Start MAVLink and MAVLink Onboard (PX4FLOW Sensor) +# +mavlink start -d /dev/ttyS0 -b 57600 +mavlink_onboard start -d /dev/ttyS3 -b 115200 +usleep 5000 + +# # Configure PX4FMU for operation with PX4IOAR # fmu mode_gpio_serial + +# +# Fire up the AR.Drone interface. +# +ardrone_interface start -d /dev/ttyS1 # # Start the sensors. @@ -38,13 +43,6 @@ fmu mode_gpio_serial sh /etc/init.d/rc.sensors # -# Start MAVLink and MAVLink Onboard (Flow Sensor) -# -mavlink start -d /dev/ttyS0 -b 57600 -mavlink_onboard start -d /dev/ttyS3 -b 115200 -usleep 5000 - -# # Start the commander. # commander start @@ -73,25 +71,6 @@ flow_position_control start # Fire up the flow speed controller # flow_speed_control start - -# -# Fire up the AR.Drone interface. -# -ardrone_interface start -d /dev/ttyS1 - -# -# Start logging once armed -# -sdlog2 start -r 50 -a -b 14 -# -# startup is done; we don't want the shell because we -# use the same UART for telemetry -# -echo "[init] startup done" - -# Try to get an USB console -nshterm /dev/ttyACM0 & - # Exit, because /dev/ttyS0 is needed for MAVLink exit diff --git a/ROMFS/px4fmu_common/init.d/10_io_f330 b/ROMFS/px4fmu_common/init.d/10_io_f330 index 50842764a..7b6509bf8 100644 --- a/ROMFS/px4fmu_common/init.d/10_io_f330 +++ b/ROMFS/px4fmu_common/init.d/10_io_f330 @@ -1,12 +1,6 @@ #!nsh -# -# Flight startup script for PX4FMU+PX4IO on an F330 quad. -# -# -# Start the ORB (first app to start) -# -uorb start +echo "[init] 10_io_f330: PX4FMU+PX4IO on a DJI F330 quad frame" # # Load default params for this platform @@ -35,8 +29,7 @@ fi # # Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor -# see https://pixhawk.ethz.ch/mavlink/ +# MAV_TYPE 2 = quadrotor # param set MAV_TYPE 2 @@ -47,71 +40,28 @@ mavlink start usleep 5000 # -# Start the commander (depends on orb, mavlink) +# Start and configure PX4IO interface # -commander start +sh /etc/init.d/rc.io # -# Start PX4IO interface (depends on orb, commander) +# Set PWM values for DJI ESCs # -if px4io start -then - # - # This sets a PWM right after startup (regardless of safety button) - # - px4io idle 900 900 900 900 - - pwm -u 400 -m 0xff - - # - # Allow PX4IO to recover from midair restarts. - # this is very unlikely, but quite safe and robust. - px4io recovery - - - - # - # The values are for spinning motors when armed using DJI ESCs - # - px4io min 1200 1200 1200 1200 - - # - # Upper limits could be higher, this is on the safe side - # - px4io max 1800 1800 1800 1800 +px4io idle 900 900 900 900 +px4io min 1200 1200 1200 1200 +px4io max 1800 1800 1800 1800 - mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix - -else - # SOS - tone_alarm 6 -fi - -# -# Start the sensors (depends on orb, px4io) -# -sh /etc/init.d/rc.sensors - # -# Start GPS interface (depends on orb) +# Load mixer # -gps start - +mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix + # -# Start the attitude estimator (depends on orb) +# Set PWM output frequency # -attitude_estimator_ekf start - -multirotor_att_control start +pwm -u 400 -m 0xff # -# Disable px4io topic limiting and start logging +# Start common for all multirotors apps # -if [ $BOARD == fmuv1 ] -then - px4io limit 200 - sdlog2 start -r 50 -a -b 16 -else - px4io limit 400 - sdlog2 start -r 200 -a -b 16 -fi +sh /etc/init.d/rc.multirotor diff --git a/ROMFS/px4fmu_common/init.d/15_io_tbs b/ROMFS/px4fmu_common/init.d/15_io_tbs index 237bb4267..b4f063e52 100644 --- a/ROMFS/px4fmu_common/init.d/15_io_tbs +++ b/ROMFS/px4fmu_common/init.d/15_io_tbs @@ -1,27 +1,6 @@ #!nsh -# -# Flight startup script for PX4FMU+PX4IO on a Team Blacksheep Discovery quad -# with stock DJI ESCs, motors and props. -# - -# disable USB and autostart -set USB no -set MODE custom -# -# Start the ORB (first app to start) -# -uorb start - -# -# Load microSD params -# -echo "[init] loading microSD params" -param select /fs/microsd/params -if [ -f /fs/microsd/params ] -then - param load /fs/microsd/params -fi +echo "[init] 15_io_tbs: PX4FMU+PX4IO on a Team Blacksheep Discovery quad" # # Load default params for this platform @@ -47,11 +26,10 @@ then param save /fs/microsd/params fi - + # # Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor -# see https://pixhawk.ethz.ch/mavlink/ +# MAV_TYPE 2 = quadrotor # param set MAV_TYPE 2 @@ -62,77 +40,28 @@ mavlink start usleep 5000 # -# Start the commander (depends on orb, mavlink) -# -commander start - -# -# Start PX4IO interface (depends on orb, commander) -# -px4io start -pwm -u 400 -m 0xff - +# Start and configure PX4IO interface # -# Allow PX4IO to recover from midair restarts. -# This is very unlikely, but quite safe and robust. -px4io recovery +sh /etc/init.d/rc.io # -# This sets a PWM right after startup (regardless of safety button) +# Set PWM values for DJI ESCs # px4io idle 900 900 900 900 - -# -# The values are for spinning motors when armed using DJI ESCs -# px4io min 1180 1180 1180 1180 - -# -# Upper limits could be higher, this is on the safe side -# px4io max 1800 1800 1800 1800 # # Load the mixer for a quad with wide arms # mixer load /dev/pwm_output /etc/mixers/FMU_quad_w.mix - -# -# Start the sensors (depends on orb, px4io) -# -sh /etc/init.d/rc.sensors - -# -# Start GPS interface (depends on orb) -# -gps start - -# -# Start the attitude estimator (depends on orb) -# -attitude_estimator_ekf start # -# Start the controllers (depends on orb) +# Set PWM output frequency # -multirotor_att_control start +pwm -u 400 -m 0xff # -# Disable px4io topic limiting and start logging +# Start common for all multirotors apps # -if [ $BOARD == fmuv1 ] -then - px4io limit 200 - sdlog2 start -r 50 -a -b 16 - if blinkm start - then - blinkm systemstate - fi -else - px4io limit 400 - sdlog2 start -r 200 -a -b 16 - if rgbled start - then - #rgbled systemstate - fi -fi +sh /etc/init.d/rc.multirotor diff --git a/ROMFS/px4fmu_common/init.d/30_io_camflyer b/ROMFS/px4fmu_common/init.d/30_io_camflyer index 5090b98a4..c9d5d6632 100644 --- a/ROMFS/px4fmu_common/init.d/30_io_camflyer +++ b/ROMFS/px4fmu_common/init.d/30_io_camflyer @@ -1,26 +1,6 @@ #!nsh -# -# Flight startup script for PX4FMU+PX4IO -# - -# disable USB and autostart -set USB no -set MODE custom - -# -# Start the ORB (first app to start) -# -uorb start - -# -# Load microSD params -# -echo "[init] loading microSD params" -param select /fs/microsd/params -if [ -f /fs/microsd/params ] -then - param load /fs/microsd/params -fi + +cho "[init] 30_io_camflyer: PX4FMU+PX4IO on Camflyer" # # Load default params for this platform @@ -28,40 +8,19 @@ fi if param compare SYS_AUTOCONFIG 1 then # Set all params here, then disable autoconfig + # TODO + param set SYS_AUTOCONFIG 0 param save /fs/microsd/params fi # # Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor -# see https://pixhawk.ethz.ch/mavlink/ +# MAV_TYPE 1 = fixed wing # param set MAV_TYPE 1 # -# Check if PX4IO Firmware should be upgraded (from Andrew Tridgell) -# -if [ -f /fs/microsd/px4io.bin ] -then - echo "PX4IO Firmware found. Checking Upgrade.." - if cmp /fs/microsd/px4io.bin /fs/microsd/px4io.bin.current - then - echo "No newer version, skipping upgrade." - else - echo "Loading /fs/microsd/px4io.bin" - if px4io update /fs/microsd/px4io.bin > /fs/microsd/px4io_update.log - then - cp /fs/microsd/px4io.bin /fs/microsd/px4io.bin.current - echo "Flashed /fs/microsd/px4io.bin OK" >> /fs/microsd/px4io_update.log - else - echo "Failed flashing /fs/microsd/px4io.bin" >> /fs/microsd/px4io_update.log - echo "Failed to upgrade PX4IO firmware - check if PX4IO is in bootloader mode" - fi - fi -fi - -# # Start MAVLink (depends on orb) # mavlink start -d /dev/ttyS1 -b 57600 @@ -106,16 +65,3 @@ kalman_demo start # mixer load /dev/pwm_output /etc/mixers/FMU_Q.mix control_demo start - -# -# Start logging -# -sdlog2 start -r 50 -a -b 14 - -# -# Start system state -# -if blinkm start -then - blinkm systemstate -fi diff --git a/ROMFS/px4fmu_common/init.d/31_io_phantom b/ROMFS/px4fmu_common/init.d/31_io_phantom index 5090b98a4..0deffe3f1 100644 --- a/ROMFS/px4fmu_common/init.d/31_io_phantom +++ b/ROMFS/px4fmu_common/init.d/31_io_phantom @@ -1,26 +1,6 @@ #!nsh -# -# Flight startup script for PX4FMU+PX4IO -# - -# disable USB and autostart -set USB no -set MODE custom - -# -# Start the ORB (first app to start) -# -uorb start - -# -# Load microSD params -# -echo "[init] loading microSD params" -param select /fs/microsd/params -if [ -f /fs/microsd/params ] -then - param load /fs/microsd/params -fi + +echo "[init] 31_io_phantom: PX4FMU+PX4IO on Phantom" # # Load default params for this platform @@ -28,76 +8,50 @@ fi if param compare SYS_AUTOCONFIG 1 then # Set all params here, then disable autoconfig + # TODO + param set SYS_AUTOCONFIG 0 param save /fs/microsd/params fi # # Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor -# see https://pixhawk.ethz.ch/mavlink/ +# MAV_TYPE 1 = fixed wing # param set MAV_TYPE 1 - -# -# Check if PX4IO Firmware should be upgraded (from Andrew Tridgell) -# -if [ -f /fs/microsd/px4io.bin ] -then - echo "PX4IO Firmware found. Checking Upgrade.." - if cmp /fs/microsd/px4io.bin /fs/microsd/px4io.bin.current - then - echo "No newer version, skipping upgrade." - else - echo "Loading /fs/microsd/px4io.bin" - if px4io update /fs/microsd/px4io.bin > /fs/microsd/px4io_update.log - then - cp /fs/microsd/px4io.bin /fs/microsd/px4io.bin.current - echo "Flashed /fs/microsd/px4io.bin OK" >> /fs/microsd/px4io_update.log - else - echo "Failed flashing /fs/microsd/px4io.bin" >> /fs/microsd/px4io_update.log - echo "Failed to upgrade PX4IO firmware - check if PX4IO is in bootloader mode" - fi - fi -fi - + # # Start MAVLink (depends on orb) # mavlink start -d /dev/ttyS1 -b 57600 usleep 5000 - -# -# Start the commander (depends on orb, mavlink) -# -commander start - -# -# Start PX4IO interface (depends on orb, commander) + # -px4io start - +# Start and configure PX4IO interface # -# Allow PX4IO to recover from midair restarts. -# this is very unlikely, but quite safe and robust. -px4io recovery +sh /etc/init.d/rc.io # # Set actuator limit to 100 Hz update (50 Hz PWM) px4io limit 100 # -# Start the sensors (depends on orb, px4io) +# Start the commander +# +commander start + +# +# Start the sensors # sh /etc/init.d/rc.sensors # -# Start GPS interface (depends on orb) +# Start GPS interface # gps start # -# Start the attitude estimator (depends on orb) +# Start the attitude estimator # kalman_demo start @@ -106,16 +60,3 @@ kalman_demo start # mixer load /dev/pwm_output /etc/mixers/FMU_Q.mix control_demo start - -# -# Start logging -# -sdlog2 start -r 50 -a -b 14 - -# -# Start system state -# -if blinkm start -then - blinkm systemstate -fi diff --git a/ROMFS/px4fmu_common/init.d/40_io_segway b/ROMFS/px4fmu_common/init.d/40_io_segway index 5742d685a..2890f43be 100644 --- a/ROMFS/px4fmu_common/init.d/40_io_segway +++ b/ROMFS/px4fmu_common/init.d/40_io_segway @@ -1,26 +1,4 @@ #!nsh -# -# Flight startup script for PX4FMU+PX4IO -# - -# disable USB and autostart -set USB no -set MODE custom - -# -# Start the ORB (first app to start) -# -uorb start - -# -# Load microSD params -# -echo "[init] loading microSD params" -param select /fs/microsd/params -if [ -f /fs/microsd/params ] -then - param load /fs/microsd/params -fi # # Load default params for this platform @@ -28,39 +6,18 @@ fi if param compare SYS_AUTOCONFIG 1 then # Set all params here, then disable autoconfig + # TODO + param set SYS_AUTOCONFIG 0 param save /fs/microsd/params fi # # Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor -# see https://pixhawk.ethz.ch/mavlink/ +# MAV_TYPE 10 = ground rover # param set MAV_TYPE 10 - -# -# Check if PX4IO Firmware should be upgraded (from Andrew Tridgell) -# -if [ -f /fs/microsd/px4io.bin ] -then - echo "PX4IO Firmware found. Checking Upgrade.." - if cmp /fs/microsd/px4io.bin /fs/microsd/px4io.bin.current - then - echo "No newer version, skipping upgrade." - else - echo "Loading /fs/microsd/px4io.bin" - if px4io update /fs/microsd/px4io.bin > /fs/microsd/px4io_update.log - then - cp /fs/microsd/px4io.bin /fs/microsd/px4io.bin.current - echo "Flashed /fs/microsd/px4io.bin OK" >> /fs/microsd/px4io_update.log - else - echo "Failed flashing /fs/microsd/px4io.bin" >> /fs/microsd/px4io_update.log - echo "Failed to upgrade PX4IO firmware - check if PX4IO is in bootloader mode" - fi - fi -fi - + # # Start MAVLink (depends on orb) # @@ -68,26 +25,16 @@ mavlink start -d /dev/ttyS1 -b 57600 usleep 5000 # -# Start the commander (depends on orb, mavlink) +# Start and configure PX4IO interface # -commander start +sh /etc/init.d/rc.io # -# Start PX4IO interface (depends on orb, commander) -# -px4io start - +# Start the commander (depends on orb, mavlink) # -# Allow PX4IO to recover from midair restarts. -# this is very unlikely, but quite safe and robust. -px4io recovery +commander start # -# Disable px4io topic limiting -# -px4io limit 200 - -# # Start the sensors (depends on orb, px4io) # sh /etc/init.d/rc.sensors @@ -107,16 +54,3 @@ attitude_estimator_ekf start # md25 start 3 0x58 segway start - -# -# Start logging -# -sdlog2 start -r 50 -a -b 14 - -# -# Start system state -# -if blinkm start -then - blinkm systemstate -fi diff --git a/ROMFS/px4fmu_common/init.d/666_fmu_quad_x550 b/ROMFS/px4fmu_common/init.d/666_fmu_q_x550 index a7ffffaee..2c8218013 100644 --- a/ROMFS/px4fmu_common/init.d/666_fmu_quad_x550 +++ b/ROMFS/px4fmu_common/init.d/666_fmu_q_x550 @@ -1,28 +1,6 @@ #!nsh -# -# Flight startup script for PX4FMU with PWM outputs. -# - -# disable USB and autostart -set USB no -set MODE custom - -echo "[init] doing PX4FMU Quad startup 666_fmu_quad_X550..." - -# -# Start the ORB -# -uorb start - -# -# Load microSD params -# -echo "[init] loading microSD params" -param select /fs/microsd/params -if [ -f /fs/microsd/params ] -then - param load /fs/microsd/params -fi + +echo "[init] 666_fmu_q_x550: PX4FMU Quad X550 with PWM outputs" # # Load default params for this platform @@ -52,8 +30,7 @@ fi # # Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor -# see https://pixhawk.ethz.ch/mavlink/ +# MAV_TYPE 2 = quadrotor # param set MAV_TYPE 2 @@ -62,55 +39,26 @@ param set MAV_TYPE 2 # mavlink start -d /dev/ttyS0 -b 57600 usleep 5000 - -# -# Start the sensors and test them. -# -sh /etc/init.d/rc.sensors - -# -# Start the commander. -# -commander start # -# Start GPS interface (depends on orb) -# -gps start - -# -# Start the attitude estimator -# -attitude_estimator_ekf start +# Start PWM output # -# Start the position estimator -# -position_estimator_inav start - -echo "[init] starting PWM output" fmu mode_pwm -mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix -pwm -u 400 -m 0xff - + # -# Start attitude control +# Load mixer # -multirotor_att_control start +mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix # -# Start position control +# Set PWM output frequency # -multirotor_pos_control start +pwm -u 400 -m 0xff # -# Start logging +# Start common for all multirotors apps # -sdlog2 start -r 50 -a -b 14 +sh /etc/init.d/rc.multirotor -# -# Start system state -# -if blinkm start -then - blinkm systemstate -fi +# Exit, because /dev/ttyS0 is needed for MAVLink +exit diff --git a/ROMFS/px4fmu_common/init.d/rc.io b/ROMFS/px4fmu_common/init.d/rc.io new file mode 100644 index 000000000..85f00e582 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/rc.io @@ -0,0 +1,23 @@ +# +# Start PX4IO interface (depends on orb, commander) +# +if px4io start +then + # + # Allow PX4IO to recover from midair restarts. + # this is very unlikely, but quite safe and robust. + px4io recovery + + # + # Disable px4io topic limiting + # + if [ $BOARD == fmuv1 ] + then + px4io limit 200 + else + px4io limit 400 + fi +else + # SOS + tone_alarm 6 +fi diff --git a/ROMFS/px4fmu_common/init.d/rc.logging b/ROMFS/px4fmu_common/init.d/rc.logging index 09c2d00d1..dc4be8055 100644 --- a/ROMFS/px4fmu_common/init.d/rc.logging +++ b/ROMFS/px4fmu_common/init.d/rc.logging @@ -5,5 +5,10 @@ if [ -d /fs/microsd ] then - sdlog start + if [ $BOARD == fmuv1 ] + then + sdlog2 start -r 50 -a -b 16 + else + sdlog2 start -r 200 -a -b 16 + fi fi diff --git a/ROMFS/px4fmu_common/init.d/rc.multirotor b/ROMFS/px4fmu_common/init.d/rc.multirotor index 81184f363..73f1b3742 100644 --- a/ROMFS/px4fmu_common/init.d/rc.multirotor +++ b/ROMFS/px4fmu_common/init.d/rc.multirotor @@ -37,13 +37,3 @@ multirotor_att_control start # Start position control # multirotor_pos_control start - -# -# Start logging -# -if [ $BOARD == fmuv1 ] -then - sdlog2 start -r 50 -a -b 16 -else - sdlog2 start -r 200 -a -b 16 -fi diff --git a/ROMFS/px4fmu_common/init.d/rcS b/ROMFS/px4fmu_common/init.d/rcS index 30edf679a..6a82acdcc 100755 --- a/ROMFS/px4fmu_common/init.d/rcS +++ b/ROMFS/px4fmu_common/init.d/rcS @@ -57,168 +57,171 @@ fi if [ $MODE == autostart ] then - -# -# Start terminal -# -if sercon -then - echo "USB connected" -else - # second attempt - sercon & -fi - -# -# Start the ORB (first app to start) -# -uorb start - -# -# Load microSD params -# -if ramtron start -then - param select /ramtron/params - if [ -f /ramtron/params ] + # + # Start terminal + # + if sercon then - param load /ramtron/params + echo "USB connected" + else + # second attempt + sercon & fi -else - param select /fs/microsd/params - if [ -f /fs/microsd/params ] + + # + # Start the ORB (first app to start) + # + uorb start + + # + # Load microSD params + # + if ramtron start then - param load /fs/microsd/params + param select /ramtron/params + if [ -f /ramtron/params ] + then + param load /ramtron/params + fi + else + param select /fs/microsd/params + if [ -f /fs/microsd/params ] + then + param load /fs/microsd/params + fi fi -fi - -# -# Start system state indicator -# -if rgbled start -then - echo "Using external RGB Led" -else - if blinkm start + + # + # Start system state indicator + # + if rgbled start then - blinkm systemstate + echo "Using external RGB Led" + else + if blinkm start + then + blinkm systemstate + fi fi -fi - -# -# Check if PX4IO Firmware should be upgraded (from Andrew Tridgell) -# -if [ -f /fs/microsd/px4io.bin ] -then - echo "PX4IO Firmware found. Checking Upgrade.." - if cmp /fs/microsd/px4io.bin /fs/microsd/px4io.cur + + # + # Start logging + # + sh /etc/init.d/rc.logging + + # + # Check if PX4IO Firmware should be upgraded (from Andrew Tridgell) + # + if [ -f /fs/microsd/px4io.bin ] then - echo "No newer version, skipping upgrade." - else - echo "Loading /fs/microsd/px4io.bin" - if px4io update /fs/microsd/px4io.bin > /fs/microsd/px4io.log + echo "PX4IO Firmware found. Checking Upgrade.." + if cmp /fs/microsd/px4io.bin /fs/microsd/px4io.cur then - cp /fs/microsd/px4io.bin /fs/microsd/px4io.cur - echo "Flashed /fs/microsd/px4io.bin OK" >> /fs/microsd/px4io.log + echo "No newer version, skipping upgrade." else - echo "Failed flashing /fs/microsd/px4io.bin" >> /fs/microsd/px4io.log - echo "Failed to upgrade px4io firmware - check if px4io is in bootloader mode" + echo "Loading /fs/microsd/px4io.bin" + if px4io update /fs/microsd/px4io.bin > /fs/microsd/px4io.log + then + cp /fs/microsd/px4io.bin /fs/microsd/px4io.cur + echo "Flashed /fs/microsd/px4io.bin OK" >> /fs/microsd/px4io.log + else + echo "Failed flashing /fs/microsd/px4io.bin" >> /fs/microsd/px4io.log + echo "Failed to upgrade px4io firmware - check if px4io is in bootloader mode" + fi fi fi -fi - -# -# Check if auto-setup from one of the standard scripts is wanted -# SYS_AUTOSTART = 0 means no autostart (default) -# -if param compare SYS_AUTOSTART 1 -then - sh /etc/init.d/01_fmu_quad_x - set MODE custom -fi - -if param compare SYS_AUTOSTART 2 -then - sh /etc/init.d/02_io_quad_x - set MODE custom -fi - -if param compare SYS_AUTOSTART 8 -then - sh /etc/init.d/08_ardrone - set MODE custom -fi - -if param compare SYS_AUTOSTART 9 -then - sh /etc/init.d/09_ardrone_flow - set MODE custom -fi - -if param compare SYS_AUTOSTART 10 -then - sh /etc/init.d/10_io_f330 - set MODE custom -fi - -if param compare SYS_AUTOSTART 15 -then - sh /etc/init.d/15_io_tbs - set MODE custom -fi - -if param compare SYS_AUTOSTART 30 -then - sh /etc/init.d/30_io_camflyer - set MODE custom -fi - -if param compare SYS_AUTOSTART 31 -then - sh /etc/init.d/31_io_phantom - set MODE custom -fi - -# Try to get an USB console -nshterm /dev/ttyACM0 & - -# Start any custom extensions that might be missing -if [ -f /fs/microsd/etc/rc.local ] -then - sh /fs/microsd/etc/rc.local -fi - -# If none of the autostart scripts triggered, get a minimal setup -if [ $MODE == autostart ] -then - # Telemetry port is on both FMU boards ttyS1 - mavlink start -b 57600 -d /dev/ttyS1 - usleep 5000 - - # Start commander - commander start - - # Start px4io if present - if px4io start + + # + # Check if auto-setup from one of the standard scripts is wanted + # SYS_AUTOSTART = 0 means no autostart (default) + # + if param compare SYS_AUTOSTART 1 then - echo "PX4IO driver started" - else - if fmu mode_serial + sh /etc/init.d/01_fmu_quad_x + set MODE custom + fi + + if param compare SYS_AUTOSTART 2 + then + sh /etc/init.d/02_io_quad_x + set MODE custom + fi + + if param compare SYS_AUTOSTART 8 + then + sh /etc/init.d/08_ardrone + set MODE custom + fi + + if param compare SYS_AUTOSTART 9 + then + sh /etc/init.d/09_ardrone_flow + set MODE custom + fi + + if param compare SYS_AUTOSTART 10 + then + sh /etc/init.d/10_io_f330 + set MODE custom + fi + + if param compare SYS_AUTOSTART 15 + then + sh /etc/init.d/15_io_tbs + set MODE custom + fi + + if param compare SYS_AUTOSTART 30 + then + sh /etc/init.d/30_io_camflyer + set MODE custom + fi + + if param compare SYS_AUTOSTART 31 + then + sh /etc/init.d/31_io_phantom + set MODE custom + fi + + # Try to get an USB console + nshterm /dev/ttyACM0 & + + # Start any custom extensions that might be missing + if [ -f /fs/microsd/etc/rc.local ] + then + sh /fs/microsd/etc/rc.local + fi + + # If none of the autostart scripts triggered, get a minimal setup + if [ $MODE == autostart ] + then + # Telemetry port is on both FMU boards ttyS1 + mavlink start -b 57600 -d /dev/ttyS1 + usleep 5000 + + # Start commander + commander start + + # Start px4io if present + if px4io start then - echo "FMU driver started" + echo "PX4IO driver started" + else + if fmu mode_serial + then + echo "FMU driver started" + fi fi + + # Start sensors + sh /etc/init.d/rc.sensors + + # Start one of the estimators + attitude_estimator_ekf start + + # Start GPS + gps start + fi - - # Start sensors - sh /etc/init.d/rc.sensors - - # Start one of the estimators - attitude_estimator_ekf start - - # Start GPS - gps start - -fi - # End of autostart fi |