diff options
Diffstat (limited to 'apps/commander/commander.c')
-rw-r--r-- | apps/commander/commander.c | 559 |
1 files changed, 421 insertions, 138 deletions
diff --git a/apps/commander/commander.c b/apps/commander/commander.c index 17087ab8a..f7e93db6c 100644 --- a/apps/commander/commander.c +++ b/apps/commander/commander.c @@ -59,7 +59,6 @@ #include <errno.h> #include <debug.h> #include <sys/prctl.h> -#include <v1.0/common/mavlink.h> #include <string.h> #include <drivers/drv_led.h> #include <drivers/drv_hrt.h> @@ -73,10 +72,12 @@ #include <uORB/topics/battery_status.h> #include <uORB/topics/manual_control_setpoint.h> #include <uORB/topics/offboard_control_setpoint.h> -#include <uORB/topics/vehicle_gps_position.h> +#include <uORB/topics/vehicle_global_position.h> +#include <uORB/topics/vehicle_local_position.h> #include <uORB/topics/vehicle_command.h> #include <uORB/topics/subsystem_info.h> #include <uORB/topics/actuator_controls.h> +#include <uORB/topics/parameter_update.h> #include <mavlink/mavlink_log.h> #include <systemlib/param/param.h> @@ -94,6 +95,9 @@ PARAM_DEFINE_INT32(SYS_FAILSAVE_LL, 0); /**< Go into low-level failsafe after 0 ms */ //PARAM_DEFINE_INT32(SYS_FAILSAVE_HL, 0); /**< Go into high-level failsafe after 0 ms */ +PARAM_DEFINE_FLOAT(TRIM_ROLL, 0.0f); +PARAM_DEFINE_FLOAT(TRIM_PITCH, 0.0f); +PARAM_DEFINE_FLOAT(TRIM_YAW, 0.0f); #include <systemlib/cpuload.h> extern struct system_load_s system_load; @@ -143,7 +147,6 @@ int commander_thread_main(int argc, char *argv[]); static int buzzer_init(void); static void buzzer_deinit(void); -static void tune_confirm(void); static int led_init(void); static void led_deinit(void); static int led_toggle(int led); @@ -151,6 +154,7 @@ static int led_on(int led); static int led_off(int led); static void do_gyro_calibration(int status_pub, struct vehicle_status_s *status); static void do_mag_calibration(int status_pub, struct vehicle_status_s *status); +static void do_rc_calibration(int status_pub, struct vehicle_status_s *status); static void do_accel_calibration(int status_pub, struct vehicle_status_s *status); static void handle_command(int status_pub, struct vehicle_status_s *current_status, struct vehicle_command_s *cmd); @@ -178,7 +182,7 @@ static int buzzer_init() buzzer = open("/dev/tone_alarm", O_WRONLY); if (buzzer < 0) { - fprintf(stderr, "[commander] Buzzer: open fail\n"); + fprintf(stderr, "[cmd] Buzzer: open fail\n"); return ERROR; } @@ -196,12 +200,12 @@ static int led_init() leds = open(LED_DEVICE_PATH, 0); if (leds < 0) { - fprintf(stderr, "[commander] LED: open fail\n"); + fprintf(stderr, "[cmd] LED: open fail\n"); return ERROR; } if (ioctl(leds, LED_ON, LED_BLUE) || ioctl(leds, LED_ON, LED_AMBER)) { - fprintf(stderr, "[commander] LED: ioctl fail\n"); + fprintf(stderr, "[cmd] LED: ioctl fail\n"); return ERROR; } @@ -267,6 +271,34 @@ void tune_confirm(void) { ioctl(buzzer, TONE_SET_ALARM, 3); } +void tune_error(void) { + ioctl(buzzer, TONE_SET_ALARM, 4); +} + +void do_rc_calibration(int status_pub, struct vehicle_status_s *status) +{ + int sub_man = orb_subscribe(ORB_ID(manual_control_setpoint)); + struct manual_control_setpoint_s sp; + orb_copy(ORB_ID(manual_control_setpoint), sub_man, &sp); + + /* set parameters */ + + float p = sp.roll; + param_set(param_find("TRIM_ROLL"), &p); + p = sp.pitch; + param_set(param_find("TRIM_PITCH"), &p); + p = sp.yaw; + param_set(param_find("TRIM_YAW"), &p); + + /* store to permanent storage */ + /* auto-save to EEPROM */ + int save_ret = param_save_default(); + if(save_ret != 0) { + mavlink_log_critical(mavlink_fd, "TRIM CAL: WARN: auto-save of params failed"); + } + mavlink_log_info(mavlink_fd, "[cmd] trim calibration done"); +} + void do_mag_calibration(int status_pub, struct vehicle_status_s *status) { @@ -309,7 +341,7 @@ void do_mag_calibration(int status_pub, struct vehicle_status_s *status) }; if (OK != ioctl(fd, MAGIOCSSCALE, (long unsigned int)&mscale_null)) { warn("WARNING: failed to set scale / offsets for mag"); - mavlink_log_info(mavlink_fd, "[commander] failed to set scale / offsets for mag"); + mavlink_log_info(mavlink_fd, "[cmd] failed to set scale / offsets for mag"); } /* calibrate range */ @@ -357,7 +389,7 @@ void do_mag_calibration(int status_pub, struct vehicle_status_s *status) axis_index++; char buf[50]; - sprintf(buf, "[commander] Please rotate around %c", axislabels[axis_index]); + sprintf(buf, "[cmd] Please rotate around %c", axislabels[axis_index]); mavlink_log_info(mavlink_fd, buf); tune_confirm(); @@ -372,7 +404,7 @@ void do_mag_calibration(int status_pub, struct vehicle_status_s *status) // if ((axis_left / 1000) == 0 && axis_left > 0) { // char buf[50]; - // sprintf(buf, "[commander] %d seconds left for axis %c", axis_left, axislabels[axis_index]); + // sprintf(buf, "[cmd] %d seconds left for axis %c", axis_left, axislabels[axis_index]); // mavlink_log_info(mavlink_fd, buf); // } @@ -409,7 +441,7 @@ void do_mag_calibration(int status_pub, struct vehicle_status_s *status) calibration_counter++; } else { /* any poll failure for 1s is a reason to abort */ - mavlink_log_info(mavlink_fd, "[commander] mag cal canceled"); + mavlink_log_info(mavlink_fd, "[cmd] mag cal canceled"); break; } } @@ -445,27 +477,27 @@ void do_mag_calibration(int status_pub, struct vehicle_status_s *status) /* announce and set new offset */ if (param_set(param_find("SENS_MAG_XOFF"), &(mscale.x_offset))) { - fprintf(stderr, "[commander] Setting X mag offset failed!\n"); + fprintf(stderr, "[cmd] Setting X mag offset failed!\n"); } if (param_set(param_find("SENS_MAG_YOFF"), &(mscale.y_offset))) { - fprintf(stderr, "[commander] Setting Y mag offset failed!\n"); + fprintf(stderr, "[cmd] Setting Y mag offset failed!\n"); } if (param_set(param_find("SENS_MAG_ZOFF"), &(mscale.z_offset))) { - fprintf(stderr, "[commander] Setting Z mag offset failed!\n"); + fprintf(stderr, "[cmd] Setting Z mag offset failed!\n"); } if (param_set(param_find("SENS_MAG_XSCALE"), &(mscale.x_scale))) { - fprintf(stderr, "[commander] Setting X mag scale failed!\n"); + fprintf(stderr, "[cmd] Setting X mag scale failed!\n"); } if (param_set(param_find("SENS_MAG_YSCALE"), &(mscale.y_scale))) { - fprintf(stderr, "[commander] Setting Y mag scale failed!\n"); + fprintf(stderr, "[cmd] Setting Y mag scale failed!\n"); } if (param_set(param_find("SENS_MAG_ZSCALE"), &(mscale.z_scale))) { - fprintf(stderr, "[commander] Setting Z mag scale failed!\n"); + fprintf(stderr, "[cmd] Setting Z mag scale failed!\n"); } /* auto-save to EEPROM */ @@ -488,7 +520,7 @@ void do_mag_calibration(int status_pub, struct vehicle_status_s *status) (double)mscale.y_scale, (double)mscale.z_scale); mavlink_log_info(mavlink_fd, buf); - mavlink_log_info(mavlink_fd, "[commander] mag calibration done"); + mavlink_log_info(mavlink_fd, "[cmd] mag calibration done"); tune_confirm(); sleep(2); @@ -497,7 +529,7 @@ void do_mag_calibration(int status_pub, struct vehicle_status_s *status) /* third beep by cal end routine */ } else { - mavlink_log_info(mavlink_fd, "[commander] mag calibration FAILED (NaN)"); + mavlink_log_info(mavlink_fd, "[cmd] mag calibration FAILED (NaN)"); } /* disable calibration mode */ @@ -548,7 +580,7 @@ void do_gyro_calibration(int status_pub, struct vehicle_status_s *status) calibration_counter++; } else { /* any poll failure for 1s is a reason to abort */ - mavlink_log_info(mavlink_fd, "[commander] gyro calibration aborted, retry"); + mavlink_log_info(mavlink_fd, "[cmd] gyro calibration aborted, retry"); return; } } @@ -564,15 +596,15 @@ void do_gyro_calibration(int status_pub, struct vehicle_status_s *status) if (isfinite(gyro_offset[0]) && isfinite(gyro_offset[1]) && isfinite(gyro_offset[2])) { if (param_set(param_find("SENS_GYRO_XOFF"), &(gyro_offset[0]))) { - mavlink_log_critical(mavlink_fd, "[commander] Setting X gyro offset failed!"); + mavlink_log_critical(mavlink_fd, "[cmd] Setting X gyro offset failed!"); } if (param_set(param_find("SENS_GYRO_YOFF"), &(gyro_offset[1]))) { - mavlink_log_critical(mavlink_fd, "[commander] Setting Y gyro offset failed!"); + mavlink_log_critical(mavlink_fd, "[cmd] Setting Y gyro offset failed!"); } if (param_set(param_find("SENS_GYRO_ZOFF"), &(gyro_offset[2]))) { - mavlink_log_critical(mavlink_fd, "[commander] Setting Z gyro offset failed!"); + mavlink_log_critical(mavlink_fd, "[cmd] Setting Z gyro offset failed!"); } /* set offsets to actual value */ @@ -598,7 +630,7 @@ void do_gyro_calibration(int status_pub, struct vehicle_status_s *status) // char buf[50]; // sprintf(buf, "cal: x:%8.4f y:%8.4f z:%8.4f", (double)gyro_offset[0], (double)gyro_offset[1], (double)gyro_offset[2]); // mavlink_log_info(mavlink_fd, buf); - mavlink_log_info(mavlink_fd, "[commander] gyro calibration done"); + mavlink_log_info(mavlink_fd, "[cmd] gyro calibration done"); tune_confirm(); sleep(2); @@ -606,7 +638,7 @@ void do_gyro_calibration(int status_pub, struct vehicle_status_s *status) sleep(2); /* third beep by cal end routine */ } else { - mavlink_log_info(mavlink_fd, "[commander] gyro calibration FAILED (NaN)"); + mavlink_log_info(mavlink_fd, "[cmd] gyro calibration FAILED (NaN)"); } close(sub_sensor_combined); @@ -616,7 +648,7 @@ void do_accel_calibration(int status_pub, struct vehicle_status_s *status) { /* announce change */ - mavlink_log_info(mavlink_fd, "[commander] keep it level and still"); + mavlink_log_info(mavlink_fd, "[cmd] keep it level and still"); /* set to accel calibration mode */ status->flag_preflight_accel_calibration = true; state_machine_publish(status_pub, status, mavlink_fd); @@ -654,7 +686,7 @@ void do_accel_calibration(int status_pub, struct vehicle_status_s *status) calibration_counter++; } else { /* any poll failure for 1s is a reason to abort */ - mavlink_log_info(mavlink_fd, "[commander] acceleration calibration aborted"); + mavlink_log_info(mavlink_fd, "[cmd] acceleration calibration aborted"); return; } } @@ -673,27 +705,27 @@ void do_accel_calibration(int status_pub, struct vehicle_status_s *status) float scale = 9.80665f / total_len; if (param_set(param_find("SENS_ACC_XOFF"), &(accel_offset[0]))) { - mavlink_log_critical(mavlink_fd, "[commander] Setting X accel offset failed!"); + mavlink_log_critical(mavlink_fd, "[cmd] Setting X accel offset failed!"); } if (param_set(param_find("SENS_ACC_YOFF"), &(accel_offset[1]))) { - mavlink_log_critical(mavlink_fd, "[commander] Setting Y accel offset failed!"); + mavlink_log_critical(mavlink_fd, "[cmd] Setting Y accel offset failed!"); } if (param_set(param_find("SENS_ACC_ZOFF"), &(accel_offset[2]))) { - mavlink_log_critical(mavlink_fd, "[commander] Setting Z accel offset failed!"); + mavlink_log_critical(mavlink_fd, "[cmd] Setting Z accel offset failed!"); } if (param_set(param_find("SENS_ACC_XSCALE"), &(scale))) { - mavlink_log_critical(mavlink_fd, "[commander] Setting X accel offset failed!"); + mavlink_log_critical(mavlink_fd, "[cmd] Setting X accel offset failed!"); } if (param_set(param_find("SENS_ACC_YSCALE"), &(scale))) { - mavlink_log_critical(mavlink_fd, "[commander] Setting Y accel offset failed!"); + mavlink_log_critical(mavlink_fd, "[cmd] Setting Y accel offset failed!"); } if (param_set(param_find("SENS_ACC_ZSCALE"), &(scale))) { - mavlink_log_critical(mavlink_fd, "[commander] Setting Z accel offset failed!"); + mavlink_log_critical(mavlink_fd, "[cmd] Setting Z accel offset failed!"); } fd = open(ACCEL_DEVICE_PATH, 0); @@ -716,9 +748,9 @@ void do_accel_calibration(int status_pub, struct vehicle_status_s *status) } //char buf[50]; - //sprintf(buf, "[commander] accel cal: x:%8.4f y:%8.4f z:%8.4f\n", (double)accel_offset[0], (double)accel_offset[1], (double)accel_offset[2]); + //sprintf(buf, "[cmd] accel cal: x:%8.4f y:%8.4f z:%8.4f\n", (double)accel_offset[0], (double)accel_offset[1], (double)accel_offset[2]); //mavlink_log_info(mavlink_fd, buf); - mavlink_log_info(mavlink_fd, "[commander] accel calibration done"); + mavlink_log_info(mavlink_fd, "[cmd] accel calibration done"); tune_confirm(); sleep(2); @@ -726,7 +758,7 @@ void do_accel_calibration(int status_pub, struct vehicle_status_s *status) sleep(2); /* third beep by cal end routine */ } else { - mavlink_log_info(mavlink_fd, "[commander] accel calibration FAILED (NaN)"); + mavlink_log_info(mavlink_fd, "[cmd] accel calibration FAILED (NaN)"); } /* exit accel calibration mode */ @@ -741,7 +773,7 @@ void do_accel_calibration(int status_pub, struct vehicle_status_s *status) void handle_command(int status_pub, struct vehicle_status_s *current_vehicle_status, struct vehicle_command_s *cmd) { /* result of the command */ - uint8_t result = MAV_RESULT_UNSUPPORTED; + uint8_t result = VEHICLE_CMD_RESULT_UNSUPPORTED; /* announce command handling */ tune_confirm(); @@ -751,99 +783,74 @@ void handle_command(int status_pub, struct vehicle_status_s *current_vehicle_sta /* request to set different system mode */ switch (cmd->command) { - case MAV_CMD_DO_SET_MODE: + case VEHICLE_CMD_DO_SET_MODE: { if (OK == update_state_machine_mode_request(status_pub, current_vehicle_status, mavlink_fd, (uint8_t)cmd->param1)) { - result = MAV_RESULT_ACCEPTED; + result = VEHICLE_CMD_RESULT_ACCEPTED; } else { - result = MAV_RESULT_DENIED; + result = VEHICLE_CMD_RESULT_DENIED; } } break; - case MAV_CMD_COMPONENT_ARM_DISARM: { + case VEHICLE_CMD_COMPONENT_ARM_DISARM: { /* request to arm */ if ((int)cmd->param1 == 1) { if (OK == update_state_machine_mode_request(status_pub, current_vehicle_status, mavlink_fd, VEHICLE_MODE_FLAG_SAFETY_ARMED)) { - result = MAV_RESULT_ACCEPTED; + result = VEHICLE_CMD_RESULT_ACCEPTED; } else { - result = MAV_RESULT_DENIED; + result = VEHICLE_CMD_RESULT_DENIED; } /* request to disarm */ } else if ((int)cmd->param1 == 0) { if (OK == update_state_machine_mode_request(status_pub, current_vehicle_status, mavlink_fd, VEHICLE_MODE_FLAG_SAFETY_ARMED)) { - result = MAV_RESULT_ACCEPTED; + result = VEHICLE_CMD_RESULT_ACCEPTED; } else { - result = MAV_RESULT_DENIED; + result = VEHICLE_CMD_RESULT_DENIED; } } } break; /* request for an autopilot reboot */ - case MAV_CMD_PREFLIGHT_REBOOT_SHUTDOWN: { + case VEHICLE_CMD_PREFLIGHT_REBOOT_SHUTDOWN: { if ((int)cmd->param1 == 1) { if (OK == do_state_update(status_pub, current_vehicle_status, mavlink_fd, SYSTEM_STATE_REBOOT)) { /* SPECIAL CASE: SYSTEM WILL NEVER RETURN HERE */ - result = MAV_RESULT_ACCEPTED; + result = VEHICLE_CMD_RESULT_ACCEPTED; } else { /* system may return here */ - result = MAV_RESULT_DENIED; + result = VEHICLE_CMD_RESULT_DENIED; } } } break; - case PX4_CMD_CONTROLLER_SELECTION: { - bool changed = false; - if ((int)cmd->param1 != (int)current_vehicle_status->flag_control_rates_enabled) { - current_vehicle_status->flag_control_rates_enabled = cmd->param1; - changed = true; - } - if ((int)cmd->param2 != (int)current_vehicle_status->flag_control_attitude_enabled) { - current_vehicle_status->flag_control_attitude_enabled = cmd->param2; - changed = true; - } - if ((int)cmd->param3 != (int)current_vehicle_status->flag_control_velocity_enabled) { - current_vehicle_status->flag_control_velocity_enabled = cmd->param3; - changed = true; - } - if ((int)cmd->param4 != (int)current_vehicle_status->flag_control_position_enabled) { - current_vehicle_status->flag_control_position_enabled = cmd->param4; - changed = true; - } - - if (changed) { - /* publish current state machine */ - state_machine_publish(status_pub, current_vehicle_status, mavlink_fd); - } - } - // /* request to land */ -// case MAV_CMD_NAV_LAND: +// case VEHICLE_CMD_NAV_LAND: // { // //TODO: add check if landing possible // //TODO: add landing maneuver // // if (0 == update_state_machine_custom_mode_request(status_pub, current_vehicle_status, SYSTEM_STATE_ARMED)) { -// result = MAV_RESULT_ACCEPTED; +// result = VEHICLE_CMD_RESULT_ACCEPTED; // } } // break; // // /* request to takeoff */ -// case MAV_CMD_NAV_TAKEOFF: +// case VEHICLE_CMD_NAV_TAKEOFF: // { // //TODO: add check if takeoff possible // //TODO: add takeoff maneuver // // if (0 == update_state_machine_custom_mode_request(status_pub, current_vehicle_status, SYSTEM_STATE_AUTO)) { -// result = MAV_RESULT_ACCEPTED; +// result = VEHICLE_CMD_RESULT_ACCEPTED; // } // } // break; // /* preflight calibration */ - case MAV_CMD_PREFLIGHT_CALIBRATION: { + case VEHICLE_CMD_PREFLIGHT_CALIBRATION: { bool handled = false; /* gyro calibration */ @@ -852,16 +859,16 @@ void handle_command(int status_pub, struct vehicle_status_s *current_vehicle_sta do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_PREFLIGHT); if (current_status.state_machine == SYSTEM_STATE_PREFLIGHT) { - mavlink_log_info(mavlink_fd, "[commander] CMD starting gyro calibration"); + mavlink_log_info(mavlink_fd, "[cmd] starting gyro calibration"); tune_confirm(); do_gyro_calibration(status_pub, ¤t_status); - mavlink_log_info(mavlink_fd, "[commander] CMD finished gyro calibration"); + mavlink_log_info(mavlink_fd, "[cmd] finished gyro calibration"); tune_confirm(); do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_STANDBY); - result = MAV_RESULT_ACCEPTED; + result = VEHICLE_CMD_RESULT_ACCEPTED; } else { - mavlink_log_critical(mavlink_fd, "[commander] REJECTING gyro calibration"); - result = MAV_RESULT_DENIED; + mavlink_log_critical(mavlink_fd, "[cmd] REJECTING gyro calibration"); + result = VEHICLE_CMD_RESULT_DENIED; } handled = true; } @@ -872,16 +879,51 @@ void handle_command(int status_pub, struct vehicle_status_s *current_vehicle_sta do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_PREFLIGHT); if (current_status.state_machine == SYSTEM_STATE_PREFLIGHT) { - mavlink_log_info(mavlink_fd, "[commander] CMD starting mag calibration"); + mavlink_log_info(mavlink_fd, "[cmd] starting mag calibration"); tune_confirm(); do_mag_calibration(status_pub, ¤t_status); - mavlink_log_info(mavlink_fd, "[commander] CMD finished mag calibration"); + mavlink_log_info(mavlink_fd, "[cmd] finished mag calibration"); + tune_confirm(); + do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_STANDBY); + result = VEHICLE_CMD_RESULT_ACCEPTED; + } else { + mavlink_log_critical(mavlink_fd, "[cmd] REJECTING mag calibration"); + result = VEHICLE_CMD_RESULT_DENIED; + } + handled = true; + } + + /* zero-altitude pressure calibration */ + if ((int)(cmd->param3) == 1) { + /* transition to calibration state */ + do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_PREFLIGHT); + + if (current_status.state_machine == SYSTEM_STATE_PREFLIGHT) { + mavlink_log_info(mavlink_fd, "[cmd] zero altitude cal. not implemented"); + tune_confirm(); + } else { + mavlink_log_critical(mavlink_fd, "[cmd] REJECTING altitude calibration"); + result = VEHICLE_CMD_RESULT_DENIED; + } + handled = true; + } + + /* trim calibration */ + if ((int)(cmd->param4) == 1) { + /* transition to calibration state */ + do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_PREFLIGHT); + + if (current_status.state_machine == SYSTEM_STATE_PREFLIGHT) { + mavlink_log_info(mavlink_fd, "[cmd] starting trim calibration"); + tune_confirm(); + do_rc_calibration(status_pub, ¤t_status); + mavlink_log_info(mavlink_fd, "[cmd] finished trim calibration"); tune_confirm(); do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_STANDBY); - result = MAV_RESULT_ACCEPTED; + result = VEHICLE_CMD_RESULT_ACCEPTED; } else { - mavlink_log_critical(mavlink_fd, "[commander] CMD REJECTING mag calibration"); - result = MAV_RESULT_DENIED; + mavlink_log_critical(mavlink_fd, "[cmd] REJECTING trim calibration"); + result = VEHICLE_CMD_RESULT_DENIED; } handled = true; } @@ -892,32 +934,37 @@ void handle_command(int status_pub, struct vehicle_status_s *current_vehicle_sta do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_PREFLIGHT); if (current_status.state_machine == SYSTEM_STATE_PREFLIGHT) { - mavlink_log_info(mavlink_fd, "[commander] CMD starting accel calibration"); + mavlink_log_info(mavlink_fd, "[cmd] CMD starting accel calibration"); tune_confirm(); do_accel_calibration(status_pub, ¤t_status); tune_confirm(); - mavlink_log_info(mavlink_fd, "[commander] CMD finished accel calibration"); + mavlink_log_info(mavlink_fd, "[cmd] CMD finished accel calibration"); do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_STANDBY); - result = MAV_RESULT_ACCEPTED; + result = VEHICLE_CMD_RESULT_ACCEPTED; } else { - mavlink_log_critical(mavlink_fd, "[commander] REJECTING accel calibration"); - result = MAV_RESULT_DENIED; + mavlink_log_critical(mavlink_fd, "[cmd] REJECTING accel calibration"); + result = VEHICLE_CMD_RESULT_DENIED; } handled = true; } /* none found */ if (!handled) { - //fprintf(stderr, "[commander] refusing unsupported calibration request\n"); - mavlink_log_critical(mavlink_fd, "[commander] CMD refusing unsup. calib. request"); - result = MAV_RESULT_UNSUPPORTED; + //fprintf(stderr, "[cmd] refusing unsupported calibration request\n"); + mavlink_log_critical(mavlink_fd, "[cmd] CMD refusing unsup. calib. request"); + result = VEHICLE_CMD_RESULT_UNSUPPORTED; } } break; - case MAV_CMD_PREFLIGHT_STORAGE: { - if (current_status.flag_system_armed) { - mavlink_log_info(mavlink_fd, "[cmd] REJECTING param command while armed"); + case VEHICLE_CMD_PREFLIGHT_STORAGE: { + if (current_status.flag_system_armed && + ((current_status.system_type == VEHICLE_TYPE_QUADROTOR) || + (current_status.system_type == VEHICLE_TYPE_HEXAROTOR) || + (current_status.system_type == VEHICLE_TYPE_OCTOROTOR))) { + /* do not perform expensive memory tasks on multirotors in flight */ + // XXX this is over-safe, as soon as cmd is in low prio thread this can be allowed + mavlink_log_info(mavlink_fd, "[cmd] REJECTING save cmd while multicopter armed"); } else { // XXX move this to LOW PRIO THREAD of commander app @@ -931,11 +978,11 @@ void handle_command(int status_pub, struct vehicle_status_s *current_vehicle_sta //printf("[mavlink pm] Loaded EEPROM params in RAM\n"); mavlink_log_info(mavlink_fd, "[cmd] OK loading params from"); mavlink_log_info(mavlink_fd, param_get_default_file()); - result = MAV_RESULT_ACCEPTED; + result = VEHICLE_CMD_RESULT_ACCEPTED; } else if (read_ret == 1) { mavlink_log_info(mavlink_fd, "[cmd] OK no changes in"); mavlink_log_info(mavlink_fd, param_get_default_file()); - result = MAV_RESULT_ACCEPTED; + result = VEHICLE_CMD_RESULT_ACCEPTED; } else { if (read_ret < -1) { mavlink_log_info(mavlink_fd, "[cmd] ERR loading params from"); @@ -944,7 +991,7 @@ void handle_command(int status_pub, struct vehicle_status_s *current_vehicle_sta mavlink_log_info(mavlink_fd, "[cmd] ERR no param file named"); mavlink_log_info(mavlink_fd, param_get_default_file()); } - result = MAV_RESULT_FAILED; + result = VEHICLE_CMD_RESULT_FAILED; } } else if (((int)(cmd->param1)) == 1) { @@ -954,7 +1001,7 @@ void handle_command(int status_pub, struct vehicle_status_s *current_vehicle_sta if (write_ret == OK) { mavlink_log_info(mavlink_fd, "[cmd] OK saved param file"); mavlink_log_info(mavlink_fd, param_get_default_file()); - result = MAV_RESULT_ACCEPTED; + result = VEHICLE_CMD_RESULT_ACCEPTED; } else { if (write_ret < -1) { @@ -964,12 +1011,12 @@ void handle_command(int status_pub, struct vehicle_status_s *current_vehicle_sta mavlink_log_info(mavlink_fd, "[cmd] ERR writing params to"); mavlink_log_info(mavlink_fd, param_get_default_file()); } - result = MAV_RESULT_FAILED; + result = VEHICLE_CMD_RESULT_FAILED; } } else { mavlink_log_info(mavlink_fd, "[pm] refusing unsupp. STOR request"); - result = MAV_RESULT_UNSUPPORTED; + result = VEHICLE_CMD_RESULT_UNSUPPORTED; } } } @@ -977,7 +1024,7 @@ void handle_command(int status_pub, struct vehicle_status_s *current_vehicle_sta default: { mavlink_log_critical(mavlink_fd, "[cmd] refusing unsupported command"); - result = MAV_RESULT_UNSUPPORTED; + result = VEHICLE_CMD_RESULT_UNSUPPORTED; /* announce command rejection */ ioctl(buzzer, TONE_SET_ALARM, 4); } @@ -985,11 +1032,11 @@ void handle_command(int status_pub, struct vehicle_status_s *current_vehicle_sta } /* supported command handling stop */ - if (result == MAV_RESULT_FAILED || - result == MAV_RESULT_DENIED || - result == MAV_RESULT_UNSUPPORTED) { + if (result == VEHICLE_CMD_RESULT_FAILED || + result == VEHICLE_CMD_RESULT_DENIED || + result == VEHICLE_CMD_RESULT_UNSUPPORTED) { ioctl(buzzer, TONE_SET_ALARM, 5); - } else if (result == MAV_RESULT_ACCEPTED) { + } else if (result == VEHICLE_CMD_RESULT_ACCEPTED) { tune_confirm(); } @@ -1168,8 +1215,10 @@ int commander_thread_main(int argc, char *argv[]) failsafe_lowlevel_timeout_ms = 0; param_get(param_find("SYS_FAILSAVE_LL"), &failsafe_lowlevel_timeout_ms); + param_t _param_sys_type = param_find("MAV_TYPE"); + /* welcome user */ - printf("[commander] I am in command now!\n"); + printf("[cmd] I am in command now!\n"); /* pthreads for command and subsystem info handling */ // pthread_t command_handling_thread; @@ -1177,17 +1226,17 @@ int commander_thread_main(int argc, char *argv[]) /* initialize */ if (led_init() != 0) { - fprintf(stderr, "[commander] ERROR: Failed to initialize leds\n"); + fprintf(stderr, "[cmd] ERROR: Failed to initialize leds\n"); } if (buzzer_init() != 0) { - fprintf(stderr, "[commander] ERROR: Failed to initialize buzzer\n"); + fprintf(stderr, "[cmd] ERROR: Failed to initialize buzzer\n"); } mavlink_fd = open(MAVLINK_LOG_DEVICE, 0); if (mavlink_fd < 0) { - fprintf(stderr, "[commander] ERROR: Failed to open MAVLink log stream, start mavlink app first.\n"); + fprintf(stderr, "[cmd] ERROR: Failed to open MAVLink log stream, start mavlink app first.\n"); } /* make sure we are in preflight state */ @@ -1200,6 +1249,10 @@ int commander_thread_main(int argc, char *argv[]) /* mark all signals lost as long as they haven't been found */ current_status.rc_signal_lost = true; current_status.offboard_control_signal_lost = true; + /* allow manual override initially */ + current_status.flag_external_manual_override_ok = true; + /* flag position info as bad, do not allow auto mode */ + current_status.flag_vector_flight_mode_ok = false; /* advertise to ORB */ stat_pub = orb_advertise(ORB_ID(vehicle_status), ¤t_status); @@ -1207,11 +1260,11 @@ int commander_thread_main(int argc, char *argv[]) state_machine_publish(stat_pub, ¤t_status, mavlink_fd); if (stat_pub < 0) { - printf("[commander] ERROR: orb_advertise for topic vehicle_status failed.\n"); + printf("[cmd] ERROR: orb_advertise for topic vehicle_status failed.\n"); exit(ERROR); } - mavlink_log_info(mavlink_fd, "[commander] system is running"); + mavlink_log_info(mavlink_fd, "[cmd] system is running"); /* create pthreads */ pthread_attr_t subsystem_info_attr; @@ -1250,9 +1303,15 @@ int commander_thread_main(int argc, char *argv[]) struct offboard_control_setpoint_s sp_offboard; memset(&sp_offboard, 0, sizeof(sp_offboard)); - int gps_sub = orb_subscribe(ORB_ID(vehicle_gps_position)); - struct vehicle_gps_position_s gps; - memset(&gps, 0, sizeof(gps)); + int global_position_sub = orb_subscribe(ORB_ID(vehicle_global_position)); + struct vehicle_global_position_s global_position; + memset(&global_position, 0, sizeof(global_position)); + uint64_t last_global_position_time = 0; + + int local_position_sub = orb_subscribe(ORB_ID(vehicle_local_position)); + struct vehicle_local_position_s local_position; + memset(&local_position, 0, sizeof(local_position)); + uint64_t last_local_position_time = 0; int sensor_sub = orb_subscribe(ORB_ID(sensor_combined)); struct sensor_combined_s sensors; @@ -1263,10 +1322,16 @@ int commander_thread_main(int argc, char *argv[]) struct vehicle_command_s cmd; memset(&cmd, 0, sizeof(cmd)); + /* Subscribe to parameters changed topic */ + int param_changed_sub = orb_subscribe(ORB_ID(parameter_update)); + struct parameter_update_s param_changed; + memset(¶m_changed, 0, sizeof(param_changed)); + /* subscribe to battery topic */ int battery_sub = orb_subscribe(ORB_ID(battery_status)); struct battery_status_s battery; memset(&battery, 0, sizeof(battery)); + battery.voltage_v = 0.0f; // uint8_t vehicle_state_previous = current_status.state_machine; float voltage_previous = 0.0f; @@ -1280,6 +1345,8 @@ int commander_thread_main(int argc, char *argv[]) uint64_t failsave_ll_start_time = 0; bool state_changed = true; + bool param_init_forced = true; + while (!thread_should_exit) { @@ -1294,8 +1361,13 @@ int commander_thread_main(int argc, char *argv[]) if (new_data) { orb_copy(ORB_ID(offboard_control_setpoint), sp_offboard_sub, &sp_offboard); } - orb_copy(ORB_ID(vehicle_gps_position), gps_sub, &gps); - orb_copy(ORB_ID(sensor_combined), sensor_sub, &sensors); + + orb_check(sensor_sub, &new_data); + if (new_data) { + orb_copy(ORB_ID(sensor_combined), sensor_sub, &sensors); + } else { + sensors.battery_voltage_valid = false; + } orb_check(cmd_sub, &new_data); if (new_data) { @@ -1305,6 +1377,46 @@ int commander_thread_main(int argc, char *argv[]) /* handle it */ handle_command(stat_pub, ¤t_status, &cmd); } + /* update parameters */ + orb_check(param_changed_sub, &new_data); + if (new_data || param_init_forced) { + param_init_forced = false; + /* parameters changed */ + orb_copy(ORB_ID(parameter_update), param_changed_sub, ¶m_changed); + + /* update parameters */ + if (!current_status.flag_system_armed) { + if (param_get(_param_sys_type, &(current_status.system_type)) != OK) { + warnx("failed setting new system type"); + } + /* disable manual override for all systems that rely on electronic stabilization */ + if (current_status.system_type == VEHICLE_TYPE_QUADROTOR || + current_status.system_type == VEHICLE_TYPE_HEXAROTOR || + current_status.system_type == VEHICLE_TYPE_OCTOROTOR) { + current_status.flag_external_manual_override_ok = false; + } else { + current_status.flag_external_manual_override_ok = true; + } + } else { + printf("ARMED, rejecting sys type change\n"); + } + } + + /* update global position estimate */ + orb_check(global_position_sub, &new_data); + if (new_data) { + /* position changed */ + orb_copy(ORB_ID(vehicle_global_position), global_position_sub, &global_position); + last_global_position_time = global_position.timestamp; + } + + /* update local position estimate */ + orb_check(local_position_sub, &new_data); + if (new_data) { + /* position changed */ + orb_copy(ORB_ID(vehicle_local_position), local_position_sub, &local_position); + last_local_position_time = local_position.timestamp; + } orb_check(battery_sub, &new_data); if (new_data) { @@ -1386,14 +1498,18 @@ int commander_thread_main(int argc, char *argv[]) /* Check battery voltage */ /* write to sys_status */ - current_status.voltage_battery = battery_voltage; + if (battery_voltage_valid) { + current_status.voltage_battery = battery_voltage; + } else { + current_status.voltage_battery = 0.0f; + } /* if battery voltage is getting lower, warn using buzzer, etc. */ if (battery_voltage_valid && (bat_remain < 0.15f /* XXX MAGIC NUMBER */) && (false == low_battery_voltage_actions_done)) { //TODO: add filter, or call emergency after n measurements < VOLTAGE_BATTERY_MINIMAL_MILLIVOLTS if (low_voltage_counter > LOW_VOLTAGE_BATTERY_COUNTER_LIMIT) { low_battery_voltage_actions_done = true; - mavlink_log_critical(mavlink_fd, "[commander] WARNING! LOW BATTERY!"); + mavlink_log_critical(mavlink_fd, "[cmd] WARNING! LOW BATTERY!"); } low_voltage_counter++; @@ -1403,7 +1519,7 @@ int commander_thread_main(int argc, char *argv[]) else if (battery_voltage_valid && (bat_remain < 0.1f /* XXX MAGIC NUMBER */) && (false == critical_battery_voltage_actions_done && true == low_battery_voltage_actions_done)) { if (critical_voltage_counter > CRITICAL_VOLTAGE_BATTERY_COUNTER_LIMIT) { critical_battery_voltage_actions_done = true; - mavlink_log_critical(mavlink_fd, "[commander] EMERGENCY! CRITICAL BATTERY!"); + mavlink_log_critical(mavlink_fd, "[cmd] EMERGENCY! CRITICAL BATTERY!"); state_machine_emergency(stat_pub, ¤t_status, mavlink_fd); } @@ -1416,6 +1532,76 @@ int commander_thread_main(int argc, char *argv[]) /* End battery voltage check */ + + /* + * Check for valid position information. + * + * If the system has a valid position source from an onboard + * position estimator, it is safe to operate it autonomously. + * The flag_vector_flight_mode_ok flag indicates that a minimum + * set of position measurements is available. + */ + + /* store current state to reason later about a state change */ + bool vector_flight_mode_ok = current_status.flag_vector_flight_mode_ok; + bool global_pos_valid = current_status.flag_global_position_valid; + bool local_pos_valid = current_status.flag_local_position_valid; + + /* check for global or local position updates, set a timeout of 2s */ + if (hrt_absolute_time() - last_global_position_time < 2000000) { + current_status.flag_global_position_valid = true; + // XXX check for controller status and home position as well + } else { + current_status.flag_global_position_valid = false; + } + + if (hrt_absolute_time() - last_local_position_time < 2000000) { + current_status.flag_local_position_valid = true; + // XXX check for controller status and home position as well + } else { + current_status.flag_local_position_valid = false; + } + + /* + * Consolidate global position and local position valid flags + * for vector flight mode. + */ + if (current_status.flag_local_position_valid || + current_status.flag_global_position_valid) { + current_status.flag_vector_flight_mode_ok = true; + } else { + current_status.flag_vector_flight_mode_ok = false; + } + + /* consolidate state change, flag as changed if required */ + if (vector_flight_mode_ok != current_status.flag_vector_flight_mode_ok || + global_pos_valid != current_status.flag_global_position_valid || + local_pos_valid != current_status.flag_local_position_valid) { + state_changed = true; + } + + /* + * Mark the position of the first position lock as return to launch (RTL) + * position. The MAV will return here on command or emergency. + * + * Conditions: + * + * 1) The system aquired position lock just now + * 2) The system has not aquired position lock before + * 3) The system is not armed (on the ground) + */ + if (!current_status.flag_valid_launch_position && + !vector_flight_mode_ok && current_status.flag_vector_flight_mode_ok && + !current_status.flag_system_armed) { + /* first time a valid position, store it and emit it */ + + // XXX implement storage and publication of RTL position + current_status.flag_valid_launch_position = true; + current_status.flag_auto_flight_mode_ok = true; + state_changed = true; + } + + /* Check if last transition deserved an audio event */ // #warning This code depends on state that is no longer? maintained // #if 0 @@ -1481,8 +1667,97 @@ int commander_thread_main(int argc, char *argv[]) if ((hrt_absolute_time() - sp_man.timestamp) < 100000) { - /* check if left stick is in lower left position --> switch to standby state */ - if ((sp_man.yaw < -STICK_ON_OFF_LIMIT) && sp_man.throttle < STICK_THRUST_RANGE*0.2f) { //TODO: remove hardcoded values + // /* + // * Check if manual control modes have to be switched + // */ + // if (!isfinite(sp_man.manual_mode_switch)) { + // printf("man mode sw not finite\n"); + + // /* this switch is not properly mapped, set default */ + // if ((current_status.system_type == VEHICLE_TYPE_QUADROTOR) || + // (current_status.system_type == VEHICLE_TYPE_HEXAROTOR) || + // (current_status.system_type == VEHICLE_TYPE_OCTOROTOR)) { + + // /* assuming a rotary wing, fall back to SAS */ + // current_status.manual_control_mode = VEHICLE_MANUAL_CONTROL_MODE_SAS; + // current_status.flag_control_attitude_enabled = true; + // current_status.flag_control_rates_enabled = true; + // } else { + + // /* assuming a fixed wing, fall back to direct pass-through */ + // current_status.manual_control_mode = VEHICLE_MANUAL_CONTROL_MODE_DIRECT; + // current_status.flag_control_attitude_enabled = false; + // current_status.flag_control_rates_enabled = false; + // } + + // } else if (sp_man.manual_mode_switch < -STICK_ON_OFF_LIMIT) { + + // /* bottom stick position, set direct mode for vehicles supporting it */ + // if ((current_status.system_type == VEHICLE_TYPE_QUADROTOR) || + // (current_status.system_type == VEHICLE_TYPE_HEXAROTOR) || + // (current_status.system_type == VEHICLE_TYPE_OCTOROTOR)) { + + // /* assuming a rotary wing, fall back to SAS */ + // current_status.manual_control_mode = VEHICLE_MANUAL_CONTROL_MODE_SAS; + // current_status.flag_control_attitude_enabled = true; + // current_status.flag_control_rates_enabled = true; + // } else { + + // /* assuming a fixed wing, set to direct pass-through as requested */ + // current_status.manual_control_mode = VEHICLE_MANUAL_CONTROL_MODE_DIRECT; + // current_status.flag_control_attitude_enabled = false; + // current_status.flag_control_rates_enabled = false; + // } + + // } else if (sp_man.manual_mode_switch > STICK_ON_OFF_LIMIT) { + + // /* top stick position, set SAS for all vehicle types */ + // current_status.manual_control_mode = VEHICLE_MANUAL_CONTROL_MODE_SAS; + // current_status.flag_control_attitude_enabled = true; + // current_status.flag_control_rates_enabled = true; + + // } else { + // /* center stick position, set rate control */ + // current_status.manual_control_mode = VEHICLE_MANUAL_CONTROL_MODE_RATES; + // current_status.flag_control_attitude_enabled = false; + // current_status.flag_control_rates_enabled = true; + // } + + // printf("man ctrl mode: %d\n", (int)current_status.manual_control_mode); + + /* + * Check if manual stability control modes have to be switched + */ + if (!isfinite(sp_man.manual_sas_switch)) { + + /* this switch is not properly mapped, set default */ + current_status.manual_sas_mode = VEHICLE_MANUAL_SAS_MODE_ROLL_PITCH_ABS_YAW_ABS; + + } else if (sp_man.manual_sas_switch < -STICK_ON_OFF_LIMIT) { + + /* bottom stick position, set altitude hold */ + current_status.manual_sas_mode = VEHICLE_MANUAL_SAS_MODE_ALTITUDE; + + } else if (sp_man.manual_sas_switch > STICK_ON_OFF_LIMIT) { + + /* top stick position */ + current_status.manual_sas_mode = VEHICLE_MANUAL_SAS_MODE_SIMPLE; + + } else { + /* center stick position, set default */ + current_status.manual_sas_mode = VEHICLE_MANUAL_SAS_MODE_ROLL_PITCH_ABS_YAW_ABS; + } + + /* + * Check if left stick is in lower left position --> switch to standby state. + * Do this only for multirotors, not for fixed wing aircraft. + */ + if (((current_status.system_type == VEHICLE_TYPE_QUADROTOR) || + (current_status.system_type == VEHICLE_TYPE_HEXAROTOR) || + (current_status.system_type == VEHICLE_TYPE_OCTOROTOR) + ) && + ((sp_man.yaw < -STICK_ON_OFF_LIMIT)) && + (sp_man.throttle < STICK_THRUST_RANGE * 0.2f)) { if (stick_off_counter > STICK_ON_OFF_COUNTER_LIMIT) { update_state_machine_disarm(stat_pub, ¤t_status, mavlink_fd); stick_on_counter = 0; @@ -1494,7 +1769,7 @@ int commander_thread_main(int argc, char *argv[]) } /* check if left stick is in lower right position --> arm */ - if (sp_man.yaw > STICK_ON_OFF_LIMIT && sp_man.throttle < STICK_THRUST_RANGE*0.2f) { //TODO: remove hardcoded values + if (sp_man.yaw > STICK_ON_OFF_LIMIT && sp_man.throttle < STICK_THRUST_RANGE * 0.2f) { if (stick_on_counter > STICK_ON_OFF_COUNTER_LIMIT) { update_state_machine_arm(stat_pub, ¤t_status, mavlink_fd); stick_on_counter = 0; @@ -1504,24 +1779,32 @@ int commander_thread_main(int argc, char *argv[]) stick_off_counter = 0; } } - //printf("RC: y:%i/t:%i s:%i chans: %i\n", rc_yaw_scale, rc_throttle_scale, mode_switch_rc_value, rc.chan_count); - if (sp_man.override_mode_switch > STICK_ON_OFF_LIMIT) { + /* check manual override switch - switch to manual or auto mode */ + if (sp_man.manual_override_switch > STICK_ON_OFF_LIMIT) { + /* enable manual override */ update_state_machine_mode_manual(stat_pub, ¤t_status, mavlink_fd); + } else if (sp_man.manual_override_switch < -STICK_ON_OFF_LIMIT) { + /* check auto mode switch for correct mode */ + if (sp_man.auto_mode_switch > STICK_ON_OFF_LIMIT) { + /* enable guided mode */ + update_state_machine_mode_guided(stat_pub, ¤t_status, mavlink_fd); - } else if (sp_man.override_mode_switch < -STICK_ON_OFF_LIMIT) { - update_state_machine_mode_auto(stat_pub, ¤t_status, mavlink_fd); + } else if (sp_man.auto_mode_switch < -STICK_ON_OFF_LIMIT) { + update_state_machine_mode_auto(stat_pub, ¤t_status, mavlink_fd); + } } else { + /* center stick position, set SAS for all vehicle types */ update_state_machine_mode_stabilized(stat_pub, ¤t_status, mavlink_fd); } /* handle the case where RC signal was regained */ if (!current_status.rc_signal_found_once) { current_status.rc_signal_found_once = true; - mavlink_log_critical(mavlink_fd, "[commander] DETECTED RC SIGNAL FIRST TIME."); + mavlink_log_critical(mavlink_fd, "[cmd] DETECTED RC SIGNAL FIRST TIME."); } else { - if (current_status.rc_signal_lost) mavlink_log_critical(mavlink_fd, "[commander] RECOVERY - RC SIGNAL GAINED!"); + if (current_status.rc_signal_lost) mavlink_log_critical(mavlink_fd, "[cmd] RECOVERY - RC SIGNAL GAINED!"); } current_status.rc_signal_cutting_off = false; @@ -1534,7 +1817,7 @@ int commander_thread_main(int argc, char *argv[]) if (!current_status.rc_signal_cutting_off || ((hrt_absolute_time() - last_print_time) > 5000000)) { /* only complain if the offboard control is NOT active */ current_status.rc_signal_cutting_off = true; - mavlink_log_critical(mavlink_fd, "[commander] CRITICAL - NO REMOTE SIGNAL!"); + mavlink_log_critical(mavlink_fd, "[cmd] CRITICAL - NO REMOTE SIGNAL!"); last_print_time = hrt_absolute_time(); } /* flag as lost and update interval since when the signal was lost (to initiate RTL after some time) */ @@ -1593,10 +1876,10 @@ int commander_thread_main(int argc, char *argv[]) state_changed = true; tune_confirm(); - mavlink_log_critical(mavlink_fd, "[commander] DETECTED OFFBOARD CONTROL SIGNAL FIRST"); + mavlink_log_critical(mavlink_fd, "[cmd] DETECTED OFFBOARD CONTROL SIGNAL FIRST"); } else { if (current_status.offboard_control_signal_lost) { - mavlink_log_critical(mavlink_fd, "[commander] OK:RECOVERY OFFBOARD CONTROL"); + mavlink_log_critical(mavlink_fd, "[cmd] OK:RECOVERY OFFBOARD CONTROL"); state_changed = true; tune_confirm(); } @@ -1620,7 +1903,7 @@ int commander_thread_main(int argc, char *argv[]) /* print error message for first RC glitch and then every 5 s / 5000 ms) */ if (!current_status.offboard_control_signal_weak || ((hrt_absolute_time() - last_print_time) > 5000000)) { current_status.offboard_control_signal_weak = true; - mavlink_log_critical(mavlink_fd, "[commander] CRIT:NO OFFBOARD CONTROL!"); + mavlink_log_critical(mavlink_fd, "[cmd] CRIT:NO OFFBOARD CONTROL!"); last_print_time = hrt_absolute_time(); } /* flag as lost and update interval since when the signal was lost (to initiate RTL after some time) */ @@ -1679,11 +1962,11 @@ int commander_thread_main(int argc, char *argv[]) buzzer_deinit(); close(sp_man_sub); close(sp_offboard_sub); - close(gps_sub); + close(global_position_sub); close(sensor_sub); close(cmd_sub); - printf("[commander] exiting..\n"); + printf("[cmd] exiting..\n"); fflush(stdout); thread_running = false; |