diff options
Diffstat (limited to 'apps/drivers/boards/px4fmu/px4fmu_init.c')
| -rw-r--r-- | apps/drivers/boards/px4fmu/px4fmu_init.c | 232 |
1 files changed, 0 insertions, 232 deletions
diff --git a/apps/drivers/boards/px4fmu/px4fmu_init.c b/apps/drivers/boards/px4fmu/px4fmu_init.c deleted file mode 100644 index 9960c6bbd..000000000 --- a/apps/drivers/boards/px4fmu/px4fmu_init.c +++ /dev/null @@ -1,232 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/** - * @file px4fmu_init.c - * - * PX4FMU-specific early startup code. This file implements the - * nsh_archinitialize() function that is called early by nsh during startup. - * - * Code here is run before the rcS script is invoked; it should start required - * subsystems and perform board-specific initialisation. - */ - -/**************************************************************************** - * Included Files - ****************************************************************************/ - -#include <nuttx/config.h> - -#include <stdbool.h> -#include <stdio.h> -#include <debug.h> -#include <errno.h> - -#include <nuttx/arch.h> -#include <nuttx/spi.h> -#include <nuttx/i2c.h> -#include <nuttx/mmcsd.h> -#include <nuttx/analog/adc.h> - -#include "stm32_internal.h" -#include "px4fmu_internal.h" -#include "stm32_uart.h" - -#include <arch/board/board.h> - -#include <drivers/drv_hrt.h> -#include <drivers/drv_led.h> - -#include <systemlib/cpuload.h> - -/**************************************************************************** - * Pre-Processor Definitions - ****************************************************************************/ - -/* Configuration ************************************************************/ - -/* Debug ********************************************************************/ - -#ifdef CONFIG_CPP_HAVE_VARARGS -# ifdef CONFIG_DEBUG -# define message(...) lowsyslog(__VA_ARGS__) -# else -# define message(...) printf(__VA_ARGS__) -# endif -#else -# ifdef CONFIG_DEBUG -# define message lowsyslog -# else -# define message printf -# endif -#endif - -/**************************************************************************** - * Protected Functions - ****************************************************************************/ - -/**************************************************************************** - * Public Functions - ****************************************************************************/ - -/************************************************************************************ - * Name: stm32_boardinitialize - * - * Description: - * All STM32 architectures must provide the following entry point. This entry point - * is called early in the intitialization -- after all memory has been configured - * and mapped but before any devices have been initialized. - * - ************************************************************************************/ - -__EXPORT void stm32_boardinitialize(void) -{ - /* configure SPI interfaces */ - stm32_spiinitialize(); - - /* configure LEDs */ - up_ledinit(); -} - -/**************************************************************************** - * Name: nsh_archinitialize - * - * Description: - * Perform architecture specific initialization - * - ****************************************************************************/ - -static struct spi_dev_s *spi1; -static struct spi_dev_s *spi3; - -#include <math.h> - -#ifdef __cplusplus -__EXPORT int matherr(struct __exception *e) -{ - return 1; -} -#else -__EXPORT int matherr(struct exception *e) -{ - return 1; -} -#endif - -__EXPORT int nsh_archinitialize(void) -{ - int result; - - /* configure the high-resolution time/callout interface */ - hrt_init(); - - /* configure CPU load estimation */ -#ifdef CONFIG_SCHED_INSTRUMENTATION - cpuload_initialize_once(); -#endif - - /* set up the serial DMA polling */ - static struct hrt_call serial_dma_call; - struct timespec ts; - - /* - * Poll at 1ms intervals for received bytes that have not triggered - * a DMA event. - */ - ts.tv_sec = 0; - ts.tv_nsec = 1000000; - - hrt_call_every(&serial_dma_call, - ts_to_abstime(&ts), - ts_to_abstime(&ts), - (hrt_callout)stm32_serial_dma_poll, - NULL); - - // initial LED state - drv_led_start(); - up_ledoff(LED_BLUE); - up_ledoff(LED_AMBER); - up_ledon(LED_BLUE); - - /* Configure SPI-based devices */ - - spi1 = up_spiinitialize(1); - - if (!spi1) { - message("[boot] FAILED to initialize SPI port 1\r\n"); - up_ledon(LED_AMBER); - return -ENODEV; - } - - // Default SPI1 to 1MHz and de-assert the known chip selects. - SPI_SETFREQUENCY(spi1, 10000000); - SPI_SETBITS(spi1, 8); - SPI_SETMODE(spi1, SPIDEV_MODE3); - SPI_SELECT(spi1, PX4_SPIDEV_GYRO, false); - SPI_SELECT(spi1, PX4_SPIDEV_ACCEL, false); - SPI_SELECT(spi1, PX4_SPIDEV_MPU, false); - up_udelay(20); - - message("[boot] Successfully initialized SPI port 1\r\n"); - - /* Get the SPI port for the microSD slot */ - - message("[boot] Initializing SPI port 3\n"); - spi3 = up_spiinitialize(3); - - if (!spi3) { - message("[boot] FAILED to initialize SPI port 3\n"); - up_ledon(LED_AMBER); - return -ENODEV; - } - - message("[boot] Successfully initialized SPI port 3\n"); - - /* Now bind the SPI interface to the MMCSD driver */ - result = mmcsd_spislotinitialize(CONFIG_NSH_MMCSDMINOR, CONFIG_NSH_MMCSDSLOTNO, spi3); - - if (result != OK) { - message("[boot] FAILED to bind SPI port 3 to the MMCSD driver\n"); - up_ledon(LED_AMBER); - return -ENODEV; - } - - message("[boot] Successfully bound SPI port 3 to the MMCSD driver\n"); - - stm32_configgpio(GPIO_ADC1_IN10); - stm32_configgpio(GPIO_ADC1_IN11); - stm32_configgpio(GPIO_ADC1_IN12); - stm32_configgpio(GPIO_ADC1_IN13); // jumperable to MPU6000 DRDY on some boards - - return OK; -} |